ARM: dts: msm: Enable modem over virtual platform.

Add devices needed for modem.

Change-Id: I513c388df7dabec9ee1eb0b74af5d76cec261be5
Signed-off-by: Yimin Peng <yiminp@codeaurora.org>

1 files changed, 167 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/qcom/vplatform-lfv-msm8996.dts b/arch/arm/boot/dts/qcom/vplatform-lfv-msm8996.dts
index 33dc2306d957..f50302f1f34d 100644
--- a/arch/arm/boot/dts/qcom/vplatform-lfv-msm8996.dts
+++ b/arch/arm/boot/dts/qcom/vplatform-lfv-msm8996.dts
@@ -53,6 +53,11 @@
 			reg = <0 0xc8000000 0 0x00400000>;
 			label = "ion_audio_mem";
 		};
+		modem_mem: modem_region@88800000 {
+			compatible = "removed-dma-pool";
+			no-map;
+			reg = <0 0x88800000 0 0x6200000>;
+		};
 	};
 };
 
@@ -491,8 +496,111 @@
 };
 
 #include "msm8996-pinctrl.dtsi"
+#include "msm8996-smp2p.dtsi"
 
 &soc {
+	qcom,ipc-spinlock@740000 {
+		compatible = "qcom,ipc-spinlock-sfpb";
+		reg = <0x740000 0x8000>;
+		qcom,num-locks = <8>;
+	};
+
+	qcom,smem@86000000 {
+		compatible = "qcom,smem";
+		reg = <0x86000000 0x200000>,
+			<0x9820010 0x4>,
+			<0x7b4000 0x8>;
+		reg-names = "smem", "irq-reg-base",
+			"smem_targ_info_reg";
+		qcom,mpu-enabled;
+
+		qcom,smd-modem {
+			compatible = "qcom,smd";
+			qcom,smd-edge = <0>;
+			qcom,smd-irq-offset = <0x0>;
+			qcom,smd-irq-bitmask = <0x1000>;
+			interrupts = <0 449 1>;
+			label = "modem";
+			qcom,not-loadable;
+		};
+	};
+
+	qcom,rmtfs_sharedmem@0 {
+		compatible = "qcom,sharedmem-uio";
+		reg = <0x85e00000 0x00200000>;
+		reg-names = "rmtfs";
+		qcom,client-id = <0x00000001>;
+	};
+
+	qcom,glink-smem-native-xprt-modem@86000000 {
+		compatible = "qcom,glink-smem-native-xprt";
+		reg = <0x86000000 0x200000>,
+			<0x9820010 0x4>;
+		reg-names = "smem", "irq-reg-base";
+		qcom,irq-mask = <0x8000>;
+		interrupts = <0 452 1>;
+		label = "mpss";
+	};
+
+	/* IPC router */
+	qcom,ipc_router {
+		compatible = "qcom,ipc_router";
+		qcom,node-id = <1>;
+	};
+
+	qcom,ipc_router_modem_xprt {
+		compatible = "qcom,ipc_router_glink_xprt";
+		qcom,ch-name = "IPCRTR";
+		qcom,xprt-remote = "mpss";
+		qcom,glink-xprt = "smd_trans";
+		qcom,xprt-linkid = <1>;
+		qcom,xprt-version = <1>;
+		qcom,fragmented-data;
+	};
+
+	/* IPA including NDP-BAM */
+	ipa_hw: qcom,ipa@680000 {
+		compatible = "qcom,ipa";
+		reg = <0x680000 0x4effc>,
+			<0x684000 0x26934>;
+		reg-names = "ipa-base", "bam-base";
+		interrupts = <0 333 0>,
+			<0 432 0>;
+		interrupt-names = "ipa-irq", "bam-irq";
+		qcom,ipa-hw-ver = <5>; /* IPA core version = IPAv2.5 */
+		qcom,ipa-hw-mode = <0>;
+		qcom,ee = <0>;
+		qcom,use-ipa-tethering-bridge;
+		qcom,ipa-bam-remote-mode;
+		qcom,modem-cfg-emb-pipe-flt;
+		clocks = <&clock_gcc clk_ipa_clk>;
+		clock-names = "core_clk";
+		qcom,use-dma-zone;
+		qcom,msm-bus,name = "ipa";
+		qcom,msm-bus,num-cases = <3>;
+		qcom,msm-bus,num-paths = <2>;
+		qcom,msm-bus,vectors-KBps =
+		<90 512 0 0>, <90 585 0 0>,         /* No vote */
+		<90 512 80000 640000>, <90 585 80000 640000>,    /* SVS */
+		<90 512 206000 960000>, <90 585 206000 960000>;    /* PERF */
+		qcom,bus-vector-names = "MIN", "SVS", "PERF";
+	};
+
+	/* rmnet over IPA */
+	qcom,rmnet-ipa {
+		compatible = "qcom,rmnet-ipa";
+		qcom,rmnet-ipa-ssr;
+		qcom,ipa-loaduC;
+		qcom,ipa-advertise-sg-support;
+	};
+
+	/* SPS */
+	qcom,sps {
+		compatible = "qcom,msm_sps_4k";
+		qcom,device-type = <3>;
+		qcom,pipe-attr-ee;
+	};
+
 	clock_gcc: qcom,gcc@300000 {
 		compatible = "qcom,dummycc";
 		#clock-cells = <1>;
@@ -523,6 +631,65 @@
 		#reset-cells = <1>;
 	};
 
+	pil_modem: qcom,mss@2080000 {
+		compatible = "qcom,pil-q6v55-mss";
+		reg = <0x2080000 0x100>,
+			<0x0763000 0x008>,
+			<0x0765000 0x008>,
+			<0x0764000 0x008>,
+			<0x2180000 0x020>,
+			<0x038f008 0x004>;
+		reg-names = "qdsp6_base", "halt_q6", "halt_modem",
+			"halt_nc", "rmb_base", "restart_reg";
+
+		clocks = <&clock_gcc clk_cxo_clk_src>,
+			<&clock_gcc clk_gcc_mss_cfg_ahb_clk>,
+			<&clock_gcc clk_pnoc_clk>,
+			<&clock_gcc clk_gcc_mss_q6_bimc_axi_clk>,
+			<&clock_gcc clk_gcc_boot_rom_ahb_clk>,
+			<&clock_gcc clk_gpll0_out_msscc>,
+			<&clock_gcc clk_gcc_mss_snoc_axi_clk>,
+			<&clock_gcc clk_gcc_mss_mnoc_bimc_axi_clk>,
+			<&clock_gcc clk_qdss_clk>;
+		clock-names = "xo", "iface_clk", "pnoc_clk", "bus_clk",
+				"mem_clk", "gpll0_mss_clk", "snoc_axi_clk",
+				"mnoc_axi_clk", "qdss_clk";
+		qcom,proxy-clock-names = "xo", "pnoc_clk", "qdss_clk";
+		qcom,active-clock-names = "iface_clk", "bus_clk", "mem_clk",
+					"gpll0_mss_clk", "snoc_axi_clk",
+					"mnoc_axi_clk";
+
+		interrupts = <0 448 1>;
+		vdd_cx-supply = <&pm8994_s1_corner>;
+		vdd_cx-voltage = <7>;
+		vdd_mx-supply = <&pm8994_s2_corner>;
+		vdd_mx-uV = <6>;
+		vdd_pll-supply = <&pm8994_l12>;
+		qcom,vdd_pll = <1800000>;
+		qcom,firmware-name = "modem";
+		qcom,pil-self-auth;
+		qcom,sysmon-id = <0>;
+		qcom,ssctl-instance-id = <0x12>;
+		qcom,override-acc;
+		qcom,ahb-clk-vote;
+		qcom,pnoc-clk-vote;
+		qcom,qdsp6v56-1-5;
+		qcom,mx-spike-wa;
+		memory-region = <&modem_mem>;
+		qcom,mem-protect-id = <0xF>;
+
+		/* GPIO inputs from mss */
+		qcom,gpio-err-fatal = <&smp2pgpio_ssr_smp2p_1_in 0 0>;
+		qcom,gpio-err-ready = <&smp2pgpio_ssr_smp2p_1_in 1 0>;
+		qcom,gpio-proxy-unvote = <&smp2pgpio_ssr_smp2p_1_in 2 0>;
+		qcom,gpio-stop-ack = <&smp2pgpio_ssr_smp2p_1_in 3 0>;
+		qcom,gpio-shutdown-ack = <&smp2pgpio_ssr_smp2p_1_in 7 0>;
+
+		/* GPIO output to mss */
+		qcom,gpio-force-stop = <&smp2pgpio_ssr_smp2p_1_out 0 0>;
+		status = "ok";
+	};
+
 	pm8994_s1_corner: regulator-s1-corner {
 		compatible = "qcom,stub-regulator";
 		regulator-name = "pm8994_s1_corner";