diff options
Diffstat (limited to '')
| -rw-r--r-- | circuitpython/lib/tinyusb/src/common/tusb_mcu.h | 285 |
1 files changed, 285 insertions, 0 deletions
diff --git a/circuitpython/lib/tinyusb/src/common/tusb_mcu.h b/circuitpython/lib/tinyusb/src/common/tusb_mcu.h new file mode 100644 index 0000000..8eb4ad4 --- /dev/null +++ b/circuitpython/lib/tinyusb/src/common/tusb_mcu.h @@ -0,0 +1,285 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef TUSB_MCU_H_ +#define TUSB_MCU_H_ + +//--------------------------------------------------------------------+ +// Port Specific +// TUP stand for TinyUSB Port (can be renamed) +//--------------------------------------------------------------------+ + +//------------- Unaligned Memory Access -------------// + +// ARMv7+ (M3-M7, M23-M33) can access unaligned memory +#if (defined(__ARM_ARCH) && (__ARM_ARCH >= 7)) + #define TUP_ARCH_STRICT_ALIGN 0 +#else + #define TUP_ARCH_STRICT_ALIGN 1 +#endif + +/* USB Controller Attributes for Device, Host or MCU (both) + * - ENDPOINT_MAX: max (logical) number of endpoint + * - ENDPOINT_EXCLUSIVE_NUMBER: endpoint number with different direction IN and OUT aren't allowed, + * e.g EP1 OUT & EP1 IN cannot exist together + * - RHPORT_HIGHSPEED: mask to indicate which port support highspeed mode (without external PHY) + * bit0 for port0 and so on. + */ + +//------------- NXP -------------// +#if TU_CHECK_MCU(OPT_MCU_LPC11UXX, OPT_MCU_LPC13XX, OPT_MCU_LPC15XX) + #define TUP_DCD_ENDPOINT_MAX 5 + +#elif TU_CHECK_MCU(OPT_MCU_LPC175X_6X, OPT_MCU_LPC177X_8X, OPT_MCU_LPC40XX) + #define TUP_DCD_ENDPOINT_MAX 16 + #define TUP_USBIP_OHCI + +#elif TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX) + // TODO USB0 has 6, USB1 has 4 + #define TUP_USBIP_CHIPIDEA_HS + #define TUP_USBIP_EHCI + + #define TUP_DCD_ENDPOINT_MAX 6 + #define TUP_RHPORT_HIGHSPEED 0x01 // Port0 HS, Port1 FS + + +#elif TU_CHECK_MCU(OPT_MCU_LPC51UXX) + #define TUP_DCD_ENDPOINT_MAX 5 + +#elif TU_CHECK_MCU(OPT_MCU_LPC54XXX) + // TODO USB0 has 5, USB1 has 6 + #define TUP_DCD_ENDPOINT_MAX 6 + +#elif TU_CHECK_MCU(OPT_MCU_LPC55XX) + // TODO USB0 has 5, USB1 has 6 + #define TUP_DCD_ENDPOINT_MAX 6 + +#elif TU_CHECK_MCU(OPT_MCU_MIMXRT10XX) + #define TUP_USBIP_CHIPIDEA_HS + #define TUP_USBIP_EHCI + + #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_RHPORT_HIGHSPEED 0x03 // Port0 HS, Port1 HS + + +#elif TU_CHECK_MCU(OPT_MCU_MKL25ZXX, OPT_MCU_K32L2BXX) + #define TUP_DCD_ENDPOINT_MAX 16 + +#elif TU_CHECK_MCU(OPT_MCU_MM32F327X) + #define TUP_DCD_ENDPOINT_MAX 16 + +//------------- Nordic -------------// +#elif TU_CHECK_MCU(OPT_MCU_NRF5X) + // 8 CBI + 1 ISO + #define TUP_DCD_ENDPOINT_MAX 9 + +//------------- Microchip -------------// +#elif TU_CHECK_MCU(OPT_MCU_SAMD21, OPT_MCU_SAMD51, OPT_MCU_SAME5X) || \ + TU_CHECK_MCU(OPT_MCU_SAMD11, OPT_MCU_SAML21, OPT_MCU_SAML22) + #define TUP_DCD_ENDPOINT_MAX 8 + +#elif TU_CHECK_MCU(OPT_MCU_SAMG) + #define TUP_DCD_ENDPOINT_MAX 6 + #define TUP_DCD_ENDPOINT_EXCLUSIVE_NUMBER + +#elif TU_CHECK_MCU(OPT_MCU_SAMX7X) + #define TUP_DCD_ENDPOINT_MAX 10 + #define TUP_RHPORT_HIGHSPEED 0x01 + #define TUP_DCD_ENDPOINT_EXCLUSIVE_NUMBER + +#elif TU_CHECK_MCU(OPT_MCU_PIC32MZ) + #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_EXCLUSIVE_NUMBER + +//------------- ST -------------// +#elif TU_CHECK_MCU(OPT_MCU_STM32F0) + #define TUP_DCD_ENDPOINT_MAX 8 + +#elif TU_CHECK_MCU(OPT_MCU_STM32F1) + #if defined (STM32F105x8) || defined (STM32F105xB) || defined (STM32F105xC) || \ + defined (STM32F107xB) || defined (STM32F107xC) + #define TUP_USBIP_DWC2 + #define TUP_USBIP_DWC2_STM32 + + #define TUP_DCD_ENDPOINT_MAX 4 + #else + #define TUP_DCD_ENDPOINT_MAX 8 + #endif + +#elif TU_CHECK_MCU(OPT_MCU_STM32F2) + #define TUP_USBIP_DWC2 + #define TUP_USBIP_DWC2_STM32 + + // FS has 4 ep, HS has 5 ep + #define TUP_DCD_ENDPOINT_MAX 6 + +#elif TU_CHECK_MCU(OPT_MCU_STM32F3) + #define TUP_DCD_ENDPOINT_MAX 8 + +#elif TU_CHECK_MCU(OPT_MCU_STM32F4) + #define TUP_USBIP_DWC2 + #define TUP_USBIP_DWC2_STM32 + + // For most mcu, FS has 4, HS has 6. TODO 446/469/479 HS has 9 + #define TUP_DCD_ENDPOINT_MAX 6 + +#elif TU_CHECK_MCU(OPT_MCU_STM32F7) + #define TUP_USBIP_DWC2 + #define TUP_USBIP_DWC2_STM32 + + // FS has 6, HS has 9 + #define TUP_DCD_ENDPOINT_MAX 9 + + // MCU with on-chip HS Phy + #if defined(STM32F723xx) || defined(STM32F730xx) || defined(STM32F733xx) + #define TUP_RHPORT_HIGHSPEED 0x02 // Port 0: FS, Port 1: HS + #endif + +#elif TU_CHECK_MCU(OPT_MCU_STM32H7) + #define TUP_USBIP_DWC2 + #define TUP_USBIP_DWC2_STM32 + + #define TUP_DCD_ENDPOINT_MAX 9 + +#elif TU_CHECK_MCU(OPT_MCU_STM32G4) + #define TUP_DCD_ENDPOINT_MAX 8 + +#elif TU_CHECK_MCU(OPT_MCU_STM32L0, OPT_MCU_STM32L1) + #define TUP_DCD_ENDPOINT_MAX 8 + +#elif TU_CHECK_MCU(OPT_MCU_STM32L4) + #if defined (STM32L475xx) || defined (STM32L476xx) || \ + defined (STM32L485xx) || defined (STM32L486xx) || defined (STM32L496xx) || \ + defined (STM32L4A6xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ + defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || \ + defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + #define TUP_USBIP_DWC2 + #define TUP_USBIP_DWC2_STM32 + + #define TUP_DCD_ENDPOINT_MAX 6 + #else + #define TUP_DCD_ENDPOINT_MAX 8 + #endif + +#elif TU_CHECK_MCU(OPT_MCU_STM32WB) +#define TUP_DCD_ENDPOINT_MAX 8 + +//------------- Sony -------------// +#elif TU_CHECK_MCU(OPT_MCU_CXD56) + #define TUP_DCD_ENDPOINT_MAX 7 + #define TUP_RHPORT_HIGHSPEED 0x01 + #define TUP_DCD_ENDPOINT_EXCLUSIVE_NUMBER + +//------------- TI -------------// +#elif TU_CHECK_MCU(OPT_MCU_MSP430x5xx) + #define TUP_DCD_ENDPOINT_MAX 8 + +#elif TU_CHECK_MCU(OPT_MCU_MSP432E4, OPT_MCU_TM4C123, OPT_MCU_TM4C129) + #define TUP_DCD_ENDPOINT_MAX 8 + +//------------- ValentyUSB -------------// +#elif TU_CHECK_MCU(OPT_MCU_VALENTYUSB_EPTRI) + #define TUP_DCD_ENDPOINT_MAX 16 + +//------------- Nuvoton -------------// +#elif TU_CHECK_MCU(OPT_MCU_NUC121, OPT_MCU_NUC126) + #define TUP_DCD_ENDPOINT_MAX 8 + +#elif TU_CHECK_MCU(OPT_MCU_NUC120) + #define TUP_DCD_ENDPOINT_MAX 6 + +#elif TU_CHECK_MCU(OPT_MCU_NUC505) + #define TUP_DCD_ENDPOINT_MAX 12 + #define TUP_RHPORT_HIGHSPEED 0x01 + +//------------- Espressif -------------// +#elif TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) + #define TUP_USBIP_DWC2 + #define TUP_DCD_ENDPOINT_MAX 6 + +//------------- Dialog -------------// +#elif TU_CHECK_MCU(OPT_MCU_DA1469X) + #define TUP_DCD_ENDPOINT_MAX 4 + +//------------- Raspberry Pi -------------// +#elif TU_CHECK_MCU(OPT_MCU_RP2040) + #define TUP_DCD_ENDPOINT_MAX 16 + +//------------- Silabs -------------// +#elif TU_CHECK_MCU(OPT_MCU_EFM32GG) + #define TUP_USBIP_DWC2 + #define TUP_DCD_ENDPOINT_MAX 7 + +//------------- Renesas -------------// +#elif TU_CHECK_MCU(OPT_MCU_RX63X, OPT_MCU_RX65X, OPT_MCU_RX72N) + #define TUP_DCD_ENDPOINT_MAX 10 + +//------------- GigaDevice -------------// +#elif TU_CHECK_MCU(OPT_MCU_GD32VF103) + #define TUP_USBIP_DWC2 + #define TUP_DCD_ENDPOINT_MAX 4 + +//------------- Broadcom -------------// +#elif TU_CHECK_MCU(OPT_MCU_BCM2711, OPT_MCU_BCM2835, OPT_MCU_BCM2837) + #define TUP_USBIP_DWC2 + #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_RHPORT_HIGHSPEED 0x01 + +//------------- Broadcom -------------// +#elif TU_CHECK_MCU(OPT_MCU_XMC4000) + #define TUP_USBIP_DWC2 + #define TUP_DCD_ENDPOINT_MAX 8 + +//------------- BridgeTek -------------// +#elif TU_CHECK_MCU(OPT_MCU_FT90X) + #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_RHPORT_HIGHSPEED 0x01 + +#elif TU_CHECK_MCU(OPT_MCU_FT93X) + #define TUP_DCD_ENDPOINT_MAX 16 + #define TUP_RHPORT_HIGHSPEED 0x01 + +//------------ Allwinner -------------// +#elif TU_CHECK_MCU(OPT_MCU_F1C100S) + #define TUP_DCD_ENDPOINT_MAX 4 + +#endif + +//--------------------------------------------------------------------+ +// Default Values +//--------------------------------------------------------------------+ + +#ifndef TUP_DCD_ENDPOINT_MAX + #warning "TUP_DCD_ENDPOINT_MAX is not defined for this MCU, default to 8" + #define TUP_DCD_ENDPOINT_MAX 8 +#endif + +// Default to fullspeed if not defined +#ifndef TUP_RHPORT_HIGHSPEED + #define TUP_RHPORT_HIGHSPEED 0x00 +#endif + +#endif |