summaryrefslogtreecommitdiff
path: root/drivers/scsi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi')
-rw-r--r--drivers/scsi/bnx2fc/bnx2fc.h1
-rw-r--r--drivers/scsi/bnx2fc/bnx2fc_fcoe.c10
-rw-r--r--drivers/scsi/csiostor/csio_hw.c5
-rw-r--r--drivers/scsi/libiscsi.c24
-rw-r--r--drivers/scsi/libsas/sas_expander.c4
-rw-r--r--drivers/scsi/mpt3sas/mpt3sas_scsih.c28
6 files changed, 54 insertions, 18 deletions
diff --git a/drivers/scsi/bnx2fc/bnx2fc.h b/drivers/scsi/bnx2fc/bnx2fc.h
index 499e369eabf0..8bc1625337f6 100644
--- a/drivers/scsi/bnx2fc/bnx2fc.h
+++ b/drivers/scsi/bnx2fc/bnx2fc.h
@@ -191,6 +191,7 @@ struct bnx2fc_hba {
struct bnx2fc_cmd_mgr *cmd_mgr;
spinlock_t hba_lock;
struct mutex hba_mutex;
+ struct mutex hba_stats_mutex;
unsigned long adapter_state;
#define ADAPTER_STATE_UP 0
#define ADAPTER_STATE_GOING_DOWN 1
diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
index 67405c628864..d0b227ffbd5f 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -641,15 +641,17 @@ static struct fc_host_statistics *bnx2fc_get_host_stats(struct Scsi_Host *shost)
if (!fw_stats)
return NULL;
+ mutex_lock(&hba->hba_stats_mutex);
+
bnx2fc_stats = fc_get_host_stats(shost);
init_completion(&hba->stat_req_done);
if (bnx2fc_send_stat_req(hba))
- return bnx2fc_stats;
+ goto unlock_stats_mutex;
rc = wait_for_completion_timeout(&hba->stat_req_done, (2 * HZ));
if (!rc) {
BNX2FC_HBA_DBG(lport, "FW stat req timed out\n");
- return bnx2fc_stats;
+ goto unlock_stats_mutex;
}
BNX2FC_STATS(hba, rx_stat2, fc_crc_cnt);
bnx2fc_stats->invalid_crc_count += hba->bfw_stats.fc_crc_cnt;
@@ -671,6 +673,9 @@ static struct fc_host_statistics *bnx2fc_get_host_stats(struct Scsi_Host *shost)
memcpy(&hba->prev_stats, hba->stats_buffer,
sizeof(struct fcoe_statistics_params));
+
+unlock_stats_mutex:
+ mutex_unlock(&hba->hba_stats_mutex);
return bnx2fc_stats;
}
@@ -1302,6 +1307,7 @@ static struct bnx2fc_hba *bnx2fc_hba_create(struct cnic_dev *cnic)
}
spin_lock_init(&hba->hba_lock);
mutex_init(&hba->hba_mutex);
+ mutex_init(&hba->hba_stats_mutex);
hba->cnic = cnic;
diff --git a/drivers/scsi/csiostor/csio_hw.c b/drivers/scsi/csiostor/csio_hw.c
index 622bdabc8894..dab195f04da7 100644
--- a/drivers/scsi/csiostor/csio_hw.c
+++ b/drivers/scsi/csiostor/csio_hw.c
@@ -1769,7 +1769,6 @@ csio_hw_use_fwconfig(struct csio_hw *hw, int reset, u32 *fw_cfg_param)
goto bye;
}
- mempool_free(mbp, hw->mb_mempool);
if (finicsum != cfcsum) {
csio_warn(hw,
"Config File checksum mismatch: csum=%#x, computed=%#x\n",
@@ -1780,6 +1779,10 @@ csio_hw_use_fwconfig(struct csio_hw *hw, int reset, u32 *fw_cfg_param)
rv = csio_hw_validate_caps(hw, mbp);
if (rv != 0)
goto bye;
+
+ mempool_free(mbp, hw->mb_mempool);
+ mbp = NULL;
+
/*
* Note that we're operating with parameters
* not supplied by the driver, rather than from hard-wired
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index efce04df2109..9f0b00c38658 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -1695,6 +1695,15 @@ int iscsi_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *sc)
*/
switch (session->state) {
case ISCSI_STATE_FAILED:
+ /*
+ * cmds should fail during shutdown, if the session
+ * state is bad, allowing completion to happen
+ */
+ if (unlikely(system_state != SYSTEM_RUNNING)) {
+ reason = FAILURE_SESSION_FAILED;
+ sc->result = DID_NO_CONNECT << 16;
+ break;
+ }
case ISCSI_STATE_IN_RECOVERY:
reason = FAILURE_SESSION_IN_RECOVERY;
sc->result = DID_IMM_RETRY << 16;
@@ -1980,6 +1989,19 @@ static enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc)
if (session->state != ISCSI_STATE_LOGGED_IN) {
/*
+ * During shutdown, if session is prematurely disconnected,
+ * recovery won't happen and there will be hung cmds. Not
+ * handling cmds would trigger EH, also bad in this case.
+ * Instead, handle cmd, allow completion to happen and let
+ * upper layer to deal with the result.
+ */
+ if (unlikely(system_state != SYSTEM_RUNNING)) {
+ sc->result = DID_NO_CONNECT << 16;
+ ISCSI_DBG_EH(session, "sc on shutdown, handled\n");
+ rc = BLK_EH_HANDLED;
+ goto done;
+ }
+ /*
* We are probably in the middle of iscsi recovery so let
* that complete and handle the error.
*/
@@ -2083,7 +2105,7 @@ done:
task->last_timeout = jiffies;
spin_unlock(&session->frwd_lock);
ISCSI_DBG_EH(session, "return %s\n", rc == BLK_EH_RESET_TIMER ?
- "timer reset" : "nh");
+ "timer reset" : "shutdown or nh");
return rc;
}
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 022bb6e10d98..12886f96b286 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -282,6 +282,7 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp)
phy->phy->minimum_linkrate = dr->pmin_linkrate;
phy->phy->maximum_linkrate = dr->pmax_linkrate;
phy->phy->negotiated_linkrate = phy->linkrate;
+ phy->phy->enabled = (phy->linkrate != SAS_PHY_DISABLED);
skip:
if (new_phy)
@@ -675,7 +676,7 @@ int sas_smp_get_phy_events(struct sas_phy *phy)
res = smp_execute_task(dev, req, RPEL_REQ_SIZE,
resp, RPEL_RESP_SIZE);
- if (!res)
+ if (res)
goto out;
phy->invalid_dword_count = scsi_to_u32(&resp[12]);
@@ -684,6 +685,7 @@ int sas_smp_get_phy_events(struct sas_phy *phy)
phy->phy_reset_problem_count = scsi_to_u32(&resp[24]);
out:
+ kfree(req);
kfree(resp);
return res;
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index e111c3d8c5d6..b868ef3b2ca3 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -3886,19 +3886,6 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
return 0;
}
- /*
- * Bug work around for firmware SATL handling. The loop
- * is based on atomic operations and ensures consistency
- * since we're lockless at this point
- */
- do {
- if (test_bit(0, &sas_device_priv_data->ata_command_pending)) {
- scmd->result = SAM_STAT_BUSY;
- scmd->scsi_done(scmd);
- return 0;
- }
- } while (_scsih_set_satl_pending(scmd, true));
-
sas_target_priv_data = sas_device_priv_data->sas_target;
/* invalid device handle */
@@ -3924,6 +3911,19 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
sas_device_priv_data->block)
return SCSI_MLQUEUE_DEVICE_BUSY;
+ /*
+ * Bug work around for firmware SATL handling. The loop
+ * is based on atomic operations and ensures consistency
+ * since we're lockless at this point
+ */
+ do {
+ if (test_bit(0, &sas_device_priv_data->ata_command_pending)) {
+ scmd->result = SAM_STAT_BUSY;
+ scmd->scsi_done(scmd);
+ return 0;
+ }
+ } while (_scsih_set_satl_pending(scmd, true));
+
if (scmd->sc_data_direction == DMA_FROM_DEVICE)
mpi_control = MPI2_SCSIIO_CONTROL_READ;
else if (scmd->sc_data_direction == DMA_TO_DEVICE)
@@ -3945,6 +3945,7 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
if (!smid) {
pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
ioc->name, __func__);
+ _scsih_set_satl_pending(scmd, false);
goto out;
}
mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
@@ -3975,6 +3976,7 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
if (mpi_request->DataLength) {
if (ioc->build_sg_scmd(ioc, scmd, smid)) {
mpt3sas_base_free_smid(ioc, smid);
+ _scsih_set_satl_pending(scmd, false);
goto out;
}
} else
generated by cgit v1.2.3 (git 2.25.1) at 2025-10-23 08:00:26 +0000