summaryrefslogtreecommitdiff
path: root/drivers/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/algos/i2c-algo-pca.c38
-rw-r--r--drivers/i2c/busses/i2c-brcmstb.c2
-rw-r--r--drivers/i2c/busses/i2c-cadence.c14
-rw-r--r--drivers/i2c/busses/i2c-cpm.c3
-rw-r--r--drivers/i2c/busses/i2c-designware-core.c3
-rw-r--r--drivers/i2c/busses/i2c-designware-pcidrv.c8
-rw-r--r--drivers/i2c/busses/i2c-eg20t.c1
-rw-r--r--drivers/i2c/busses/i2c-highlander.c2
-rw-r--r--drivers/i2c/busses/i2c-hix5hd2.c1
-rw-r--r--drivers/i2c/busses/i2c-i801.c21
-rw-r--r--drivers/i2c/busses/i2c-imx.c58
-rw-r--r--drivers/i2c/busses/i2c-iop3xx.c6
-rw-r--r--drivers/i2c/busses/i2c-jz4780.c41
-rw-r--r--drivers/i2c/busses/i2c-mpc.c118
-rw-r--r--drivers/i2c/busses/i2c-msm-v2.c1
-rw-r--r--drivers/i2c/busses/i2c-mt65xx.c2
-rw-r--r--drivers/i2c/busses/i2c-piix4.c3
-rw-r--r--drivers/i2c/busses/i2c-pxa.c13
-rw-r--r--drivers/i2c/busses/i2c-rcar.c8
-rw-r--r--drivers/i2c/busses/i2c-rk3x.c4
-rw-r--r--drivers/i2c/busses/i2c-robotfuzz-osif.c4
-rw-r--r--drivers/i2c/busses/i2c-s3c2410.c6
-rw-r--r--drivers/i2c/busses/i2c-sh7760.c5
-rw-r--r--drivers/i2c/busses/i2c-st.c1
-rw-r--r--drivers/i2c/i2c-dev.c65
25 files changed, 275 insertions, 153 deletions
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index e370804ec8bc..1886588b9ea3 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -50,8 +50,22 @@ static void pca_reset(struct i2c_algo_pca_data *adap)
pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_IPRESET);
pca_outw(adap, I2C_PCA_IND, 0xA5);
pca_outw(adap, I2C_PCA_IND, 0x5A);
+
+ /*
+ * After a reset we need to re-apply any configuration
+ * (calculated in pca_init) to get the bus in a working state.
+ */
+ pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_IMODE);
+ pca_outw(adap, I2C_PCA_IND, adap->bus_settings.mode);
+ pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_ISCLL);
+ pca_outw(adap, I2C_PCA_IND, adap->bus_settings.tlow);
+ pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_ISCLH);
+ pca_outw(adap, I2C_PCA_IND, adap->bus_settings.thi);
+
+ pca_set_con(adap, I2C_PCA_CON_ENSIO);
} else {
adap->reset_chip(adap->data);
+ pca_set_con(adap, I2C_PCA_CON_ENSIO | adap->bus_settings.clock_freq);
}
}
@@ -326,7 +340,8 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
DEB2("BUS ERROR - SDA Stuck low\n");
pca_reset(adap);
goto out;
- case 0x90: /* Bus error - SCL stuck low */
+ case 0x78: /* Bus error - SCL stuck low (PCA9665) */
+ case 0x90: /* Bus error - SCL stuck low (PCA9564) */
DEB2("BUS ERROR - SCL Stuck low\n");
pca_reset(adap);
goto out;
@@ -434,13 +449,14 @@ static int pca_init(struct i2c_adapter *adap)
" Use the nominal frequency.\n", adap->name);
}
- pca_reset(pca_data);
-
clock = pca_clock(pca_data);
printk(KERN_INFO "%s: Clock frequency is %dkHz\n",
adap->name, freqs[clock]);
- pca_set_con(pca_data, I2C_PCA_CON_ENSIO | clock);
+ /* Store settings as these will be needed when the PCA chip is reset */
+ pca_data->bus_settings.clock_freq = clock;
+
+ pca_reset(pca_data);
} else {
int clock;
int mode;
@@ -507,19 +523,15 @@ static int pca_init(struct i2c_adapter *adap)
thi = tlow * min_thi / min_tlow;
}
+ /* Store settings as these will be needed when the PCA chip is reset */
+ pca_data->bus_settings.mode = mode;
+ pca_data->bus_settings.tlow = tlow;
+ pca_data->bus_settings.thi = thi;
+
pca_reset(pca_data);
printk(KERN_INFO
"%s: Clock frequency is %dHz\n", adap->name, clock * 100);
-
- pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_IMODE);
- pca_outw(pca_data, I2C_PCA_IND, mode);
- pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_ISCLL);
- pca_outw(pca_data, I2C_PCA_IND, tlow);
- pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_ISCLH);
- pca_outw(pca_data, I2C_PCA_IND, thi);
-
- pca_set_con(pca_data, I2C_PCA_CON_ENSIO);
}
udelay(500); /* 500 us for oscillator to stabilise */
diff --git a/drivers/i2c/busses/i2c-brcmstb.c b/drivers/i2c/busses/i2c-brcmstb.c
index 81115abf3c1f..6e9007adad84 100644
--- a/drivers/i2c/busses/i2c-brcmstb.c
+++ b/drivers/i2c/busses/i2c-brcmstb.c
@@ -304,7 +304,7 @@ static int brcmstb_send_i2c_cmd(struct brcmstb_i2c_dev *dev,
goto cmd_out;
}
- if ((CMD_RD || CMD_WR) &&
+ if ((cmd == CMD_RD || cmd == CMD_WR) &&
bsc_readl(dev, iic_enable) & BSC_IIC_EN_NOACK_MASK) {
rc = -EREMOTEIO;
dev_dbg(dev->device, "controller received NOACK intr for %s\n",
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index 6d32e6da3110..7d15c9143d16 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -378,10 +378,8 @@ static void cdns_i2c_mrecv(struct cdns_i2c *id)
* Check for the message size against FIFO depth and set the
* 'hold bus' bit if it is greater than FIFO depth.
*/
- if ((id->recv_count > CDNS_I2C_FIFO_DEPTH) || id->bus_hold_flag)
+ if (id->recv_count > CDNS_I2C_FIFO_DEPTH)
ctrl_reg |= CDNS_I2C_CR_HOLD;
- else
- ctrl_reg = ctrl_reg & ~CDNS_I2C_CR_HOLD;
cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
@@ -438,11 +436,8 @@ static void cdns_i2c_msend(struct cdns_i2c *id)
* Check for the message size against FIFO depth and set the
* 'hold bus' bit if it is greater than FIFO depth.
*/
- if ((id->send_count > CDNS_I2C_FIFO_DEPTH) || id->bus_hold_flag)
+ if (id->send_count > CDNS_I2C_FIFO_DEPTH)
ctrl_reg |= CDNS_I2C_CR_HOLD;
- else
- ctrl_reg = ctrl_reg & ~CDNS_I2C_CR_HOLD;
-
cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
/* Clear the interrupts in interrupt status register. */
@@ -899,7 +894,10 @@ static int cdns_i2c_probe(struct platform_device *pdev)
if (IS_ERR(id->membase))
return PTR_ERR(id->membase);
- id->irq = platform_get_irq(pdev, 0);
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ return ret;
+ id->irq = ret;
id->adap.owner = THIS_MODULE;
id->adap.dev.of_node = pdev->dev.of_node;
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index b167ab25310a..34a35e927fc6 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -74,6 +74,9 @@ struct i2c_ram {
char res1[4]; /* Reserved */
ushort rpbase; /* Relocation pointer */
char res2[2]; /* Reserved */
+ /* The following elements are only for CPM2 */
+ char res3[4]; /* Reserved */
+ uint sdmatmp; /* Internal */
};
#define I2COM_START 0x80
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index de7fbbb374cd..914994c232ad 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -865,7 +865,8 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
i2c_set_adapdata(adap, dev);
i2c_dw_disable_int(dev);
- r = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr, IRQF_SHARED,
+ r = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr,
+ IRQF_SHARED | IRQF_COND_SUSPEND,
dev_name(dev->dev), dev);
if (r) {
dev_err(dev->dev, "failure requesting irq %i: %d\n",
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 1543d35d228d..683188374121 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -53,10 +53,10 @@ enum dw_pci_ctl_id_t {
};
struct dw_scl_sda_cfg {
- u32 ss_hcnt;
- u32 fs_hcnt;
- u32 ss_lcnt;
- u32 fs_lcnt;
+ u16 ss_hcnt;
+ u16 fs_hcnt;
+ u16 ss_lcnt;
+ u16 fs_lcnt;
u32 sda_hold;
};
diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c
index eef3aa6007f1..ffd8f9772096 100644
--- a/drivers/i2c/busses/i2c-eg20t.c
+++ b/drivers/i2c/busses/i2c-eg20t.c
@@ -189,6 +189,7 @@ static const struct pci_device_id pch_pcidev_id[] = {
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7831_I2C), 1, },
{0,}
};
+MODULE_DEVICE_TABLE(pci, pch_pcidev_id);
static irqreturn_t pch_i2c_handler(int irq, void *pData);
diff --git a/drivers/i2c/busses/i2c-highlander.c b/drivers/i2c/busses/i2c-highlander.c
index 56dc69e7349f..9ad031ea3300 100644
--- a/drivers/i2c/busses/i2c-highlander.c
+++ b/drivers/i2c/busses/i2c-highlander.c
@@ -382,7 +382,7 @@ static int highlander_i2c_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, dev);
dev->irq = platform_get_irq(pdev, 0);
- if (iic_force_poll)
+ if (dev->irq < 0 || iic_force_poll)
dev->irq = 0;
if (dev->irq) {
diff --git a/drivers/i2c/busses/i2c-hix5hd2.c b/drivers/i2c/busses/i2c-hix5hd2.c
index 7c6966434ee7..567c8991746b 100644
--- a/drivers/i2c/busses/i2c-hix5hd2.c
+++ b/drivers/i2c/busses/i2c-hix5hd2.c
@@ -500,6 +500,7 @@ static int hix5hd2_i2c_remove(struct platform_device *pdev)
i2c_del_adapter(&priv->adap);
pm_runtime_disable(priv->dev);
pm_runtime_set_suspended(priv->dev);
+ clk_disable_unprepare(priv->clk);
return 0;
}
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index f78069cd8d53..73026c00220c 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -327,11 +327,9 @@ static int i801_check_post(struct i801_priv *priv, int status)
dev_err(&priv->pci_dev->dev, "Transaction timeout\n");
/* try to stop the current command */
dev_dbg(&priv->pci_dev->dev, "Terminating the current operation\n");
- outb_p(inb_p(SMBHSTCNT(priv)) | SMBHSTCNT_KILL,
- SMBHSTCNT(priv));
+ outb_p(SMBHSTCNT_KILL, SMBHSTCNT(priv));
usleep_range(1000, 2000);
- outb_p(inb_p(SMBHSTCNT(priv)) & (~SMBHSTCNT_KILL),
- SMBHSTCNT(priv));
+ outb_p(0, SMBHSTCNT(priv));
/* Check if it worked */
status = inb_p(SMBHSTSTS(priv));
@@ -671,6 +669,11 @@ static int i801_block_transaction(struct i801_priv *priv,
int result = 0;
unsigned char hostc;
+ if (read_write == I2C_SMBUS_READ && command == I2C_SMBUS_BLOCK_DATA)
+ data->block[0] = I2C_SMBUS_BLOCK_MAX;
+ else if (data->block[0] < 1 || data->block[0] > I2C_SMBUS_BLOCK_MAX)
+ return -EPROTO;
+
if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
if (read_write == I2C_SMBUS_WRITE) {
/* set I2C_EN bit in configuration register */
@@ -684,16 +687,6 @@ static int i801_block_transaction(struct i801_priv *priv,
}
}
- if (read_write == I2C_SMBUS_WRITE
- || command == I2C_SMBUS_I2C_BLOCK_DATA) {
- if (data->block[0] < 1)
- data->block[0] = 1;
- if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
- data->block[0] = I2C_SMBUS_BLOCK_MAX;
- } else {
- data->block[0] = 32; /* max for SMBus block reads */
- }
-
/* Experience has shown that the block buffer can only be used for
SMBus (not I2C) block transactions, even though the datasheet
doesn't mention this limitation. */
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index cf1b57a054d0..117f367636b8 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -420,6 +420,19 @@ static void i2c_imx_dma_free(struct imx_i2c_struct *i2c_imx)
/** Functions for IMX I2C adapter driver ***************************************
*******************************************************************************/
+static void i2c_imx_clear_irq(struct imx_i2c_struct *i2c_imx, unsigned int bits)
+{
+ unsigned int temp;
+
+ /*
+ * i2sr_clr_opcode is the value to clear all interrupts. Here we want to
+ * clear only <bits>, so we write ~i2sr_clr_opcode with just <bits>
+ * toggled. This is required because i.MX needs W0C and Vybrid uses W1C.
+ */
+ temp = ~i2c_imx->hwdata->i2sr_clr_opcode ^ bits;
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
+}
+
static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy)
{
unsigned long orig_jiffies = jiffies;
@@ -432,8 +445,7 @@ static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy)
/* check for arbitration lost */
if (temp & I2SR_IAL) {
- temp &= ~I2SR_IAL;
- imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
+ i2c_imx_clear_irq(i2c_imx, I2SR_IAL);
return -EAGAIN;
}
@@ -460,6 +472,16 @@ static int i2c_imx_trx_complete(struct imx_i2c_struct *i2c_imx)
dev_dbg(&i2c_imx->adapter.dev, "<%s> Timeout\n", __func__);
return -ETIMEDOUT;
}
+
+ /* check for arbitration lost */
+ if (i2c_imx->i2csr & I2SR_IAL) {
+ dev_dbg(&i2c_imx->adapter.dev, "<%s> Arbitration lost\n", __func__);
+ i2c_imx_clear_irq(i2c_imx, I2SR_IAL);
+
+ i2c_imx->i2csr = 0;
+ return -EAGAIN;
+ }
+
dev_dbg(&i2c_imx->adapter.dev, "<%s> TRX complete\n", __func__);
i2c_imx->i2csr = 0;
return 0;
@@ -595,9 +617,7 @@ static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
if (temp & I2SR_IIF) {
/* save status register */
i2c_imx->i2csr = temp;
- temp &= ~I2SR_IIF;
- temp |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IIF);
- imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
+ i2c_imx_clear_irq(i2c_imx, I2SR_IIF);
wake_up(&i2c_imx->queue);
return IRQ_HANDLED;
}
@@ -1076,7 +1096,8 @@ static int i2c_imx_probe(struct platform_device *pdev)
/* Get I2C clock */
i2c_imx->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(i2c_imx->clk)) {
- dev_err(&pdev->dev, "can't get I2C clock\n");
+ if (PTR_ERR(i2c_imx->clk) != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "can't get I2C clock\n");
return PTR_ERR(i2c_imx->clk);
}
@@ -1092,20 +1113,20 @@ static int i2c_imx_probe(struct platform_device *pdev)
goto clk_disable;
}
- /* Request IRQ */
- ret = devm_request_irq(&pdev->dev, irq, i2c_imx_isr, 0,
- pdev->name, i2c_imx);
- if (ret) {
- dev_err(&pdev->dev, "can't claim irq %d\n", irq);
- goto clk_disable;
- }
-
/* Init queue */
init_waitqueue_head(&i2c_imx->queue);
/* Set up adapter data */
i2c_set_adapdata(&i2c_imx->adapter, i2c_imx);
+ /* Request IRQ */
+ ret = request_threaded_irq(irq, i2c_imx_isr, NULL, 0,
+ pdev->name, i2c_imx);
+ if (ret) {
+ dev_err(&pdev->dev, "can't claim irq %d\n", irq);
+ goto clk_disable;
+ }
+
/* Set up clock divider */
i2c_imx->bitrate = IMX_I2C_BIT_RATE;
ret = of_property_read_u32(pdev->dev.of_node,
@@ -1124,7 +1145,7 @@ static int i2c_imx_probe(struct platform_device *pdev)
ret = i2c_add_numbered_adapter(&i2c_imx->adapter);
if (ret < 0) {
dev_err(&pdev->dev, "registration failed\n");
- goto clk_disable;
+ goto clk_free_irq;
}
/* Set up platform driver data */
@@ -1142,6 +1163,8 @@ static int i2c_imx_probe(struct platform_device *pdev)
return 0; /* Return OK */
+clk_free_irq:
+ free_irq(irq, i2c_imx);
clk_disable:
clk_disable_unprepare(i2c_imx->clk);
return ret;
@@ -1150,6 +1173,7 @@ clk_disable:
static int i2c_imx_remove(struct platform_device *pdev)
{
struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev);
+ int irq;
/* remove adapter */
dev_dbg(&i2c_imx->adapter.dev, "adapter removed\n");
@@ -1164,6 +1188,10 @@ static int i2c_imx_remove(struct platform_device *pdev)
imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2CR);
imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2SR);
+ irq = platform_get_irq(pdev, 0);
+ if (irq >= 0)
+ free_irq(irq, i2c_imx);
+
return 0;
}
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index 72d6161cf77c..6b9031ccd767 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -459,16 +459,14 @@ iop3xx_i2c_probe(struct platform_device *pdev)
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
- ret = -ENXIO;
+ ret = irq;
goto unmap;
}
ret = request_irq(irq, iop3xx_i2c_irq_handler, 0,
pdev->name, adapter_data);
- if (ret) {
- ret = -EIO;
+ if (ret)
goto unmap;
- }
memcpy(new_adapter->name, pdev->name, strlen(pdev->name));
new_adapter->owner = THIS_MODULE;
diff --git a/drivers/i2c/busses/i2c-jz4780.c b/drivers/i2c/busses/i2c-jz4780.c
index 4b58e8aaf5c5..d80cee068bea 100644
--- a/drivers/i2c/busses/i2c-jz4780.c
+++ b/drivers/i2c/busses/i2c-jz4780.c
@@ -82,25 +82,6 @@
#define JZ4780_I2C_STA_TFNF BIT(1)
#define JZ4780_I2C_STA_ACT BIT(0)
-static const char * const jz4780_i2c_abrt_src[] = {
- "ABRT_7B_ADDR_NOACK",
- "ABRT_10ADDR1_NOACK",
- "ABRT_10ADDR2_NOACK",
- "ABRT_XDATA_NOACK",
- "ABRT_GCALL_NOACK",
- "ABRT_GCALL_READ",
- "ABRT_HS_ACKD",
- "SBYTE_ACKDET",
- "ABRT_HS_NORSTRT",
- "SBYTE_NORSTRT",
- "ABRT_10B_RD_NORSTRT",
- "ABRT_MASTER_DIS",
- "ARB_LOST",
- "SLVFLUSH_TXFIFO",
- "SLV_ARBLOST",
- "SLVRD_INTX",
-};
-
#define JZ4780_I2C_INTST_IGC BIT(11)
#define JZ4780_I2C_INTST_ISTT BIT(10)
#define JZ4780_I2C_INTST_ISTP BIT(9)
@@ -538,21 +519,8 @@ done:
static void jz4780_i2c_txabrt(struct jz4780_i2c *i2c, int src)
{
- int i;
-
- dev_err(&i2c->adap.dev, "txabrt: 0x%08x\n", src);
- dev_err(&i2c->adap.dev, "device addr=%x\n",
- jz4780_i2c_readw(i2c, JZ4780_I2C_TAR));
- dev_err(&i2c->adap.dev, "send cmd count:%d %d\n",
- i2c->cmd, i2c->cmd_buf[i2c->cmd]);
- dev_err(&i2c->adap.dev, "receive data count:%d %d\n",
- i2c->cmd, i2c->data_buf[i2c->cmd]);
-
- for (i = 0; i < 16; i++) {
- if (src & BIT(i))
- dev_dbg(&i2c->adap.dev, "I2C TXABRT[%d]=%s\n",
- i, jz4780_i2c_abrt_src[i]);
- }
+ dev_dbg(&i2c->adap.dev, "txabrt: 0x%08x, cmd: %d, send: %d, recv: %d\n",
+ src, i2c->cmd, i2c->cmd_buf[i2c->cmd], i2c->data_buf[i2c->cmd]);
}
static inline int jz4780_i2c_xfer_read(struct jz4780_i2c *i2c,
@@ -786,7 +754,10 @@ static int jz4780_i2c_probe(struct platform_device *pdev)
jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, 0x0);
- i2c->irq = platform_get_irq(pdev, 0);
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ goto err;
+ i2c->irq = ret;
ret = devm_request_irq(&pdev->dev, i2c->irq, jz4780_i2c_irq, 0,
dev_name(&pdev->dev), i2c);
if (ret)
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 48ecffecc0ed..988ea9df6654 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -23,6 +23,7 @@
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/fsl_devices.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
@@ -49,6 +50,7 @@
#define CCR_MTX 0x10
#define CCR_TXAK 0x08
#define CCR_RSTA 0x04
+#define CCR_RSVD 0x02
#define CSR_MCF 0x80
#define CSR_MAAS 0x40
@@ -70,6 +72,7 @@ struct mpc_i2c {
u8 fdr, dfsrr;
#endif
struct clk *clk_per;
+ bool has_errata_A004447;
};
struct mpc_i2c_divider {
@@ -104,23 +107,30 @@ static irqreturn_t mpc_i2c_isr(int irq, void *dev_id)
/* Sometimes 9th clock pulse isn't generated, and slave doesn't release
* the bus, because it wants to send ACK.
* Following sequence of enabling/disabling and sending start/stop generates
- * the 9 pulses, so it's all OK.
+ * the 9 pulses, each with a START then ending with STOP, so it's all OK.
*/
static void mpc_i2c_fixup(struct mpc_i2c *i2c)
{
int k;
- u32 delay_val = 1000000 / i2c->real_clk + 1;
-
- if (delay_val < 2)
- delay_val = 2;
+ unsigned long flags;
for (k = 9; k; k--) {
writeccr(i2c, 0);
- writeccr(i2c, CCR_MSTA | CCR_MTX | CCR_MEN);
+ writeb(0, i2c->base + MPC_I2C_SR); /* clear any status bits */
+ writeccr(i2c, CCR_MEN | CCR_MSTA); /* START */
+ readb(i2c->base + MPC_I2C_DR); /* init xfer */
+ udelay(15); /* let it hit the bus */
+ local_irq_save(flags); /* should not be delayed further */
+ writeccr(i2c, CCR_MEN | CCR_MSTA | CCR_RSTA); /* delay SDA */
readb(i2c->base + MPC_I2C_DR);
- writeccr(i2c, CCR_MEN);
- udelay(delay_val << 1);
+ if (k != 1)
+ udelay(5);
+ local_irq_restore(flags);
}
+ writeccr(i2c, CCR_MEN); /* Initiate STOP */
+ readb(i2c->base + MPC_I2C_DR);
+ udelay(15); /* Let STOP propagate */
+ writeccr(i2c, 0);
}
static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
@@ -178,6 +188,75 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
return 0;
}
+static int i2c_mpc_wait_sr(struct mpc_i2c *i2c, int mask)
+{
+ void __iomem *addr = i2c->base + MPC_I2C_SR;
+ u8 val;
+
+ return readb_poll_timeout(addr, val, val & mask, 0, 100);
+}
+
+/*
+ * Workaround for Erratum A004447. From the P2040CE Rev Q
+ *
+ * 1. Set up the frequency divider and sampling rate.
+ * 2. I2CCR - a0h
+ * 3. Poll for I2CSR[MBB] to get set.
+ * 4. If I2CSR[MAL] is set (an indication that SDA is stuck low), then go to
+ * step 5. If MAL is not set, then go to step 13.
+ * 5. I2CCR - 00h
+ * 6. I2CCR - 22h
+ * 7. I2CCR - a2h
+ * 8. Poll for I2CSR[MBB] to get set.
+ * 9. Issue read to I2CDR.
+ * 10. Poll for I2CSR[MIF] to be set.
+ * 11. I2CCR - 82h
+ * 12. Workaround complete. Skip the next steps.
+ * 13. Issue read to I2CDR.
+ * 14. Poll for I2CSR[MIF] to be set.
+ * 15. I2CCR - 80h
+ */
+static void mpc_i2c_fixup_A004447(struct mpc_i2c *i2c)
+{
+ int ret;
+ u32 val;
+
+ writeccr(i2c, CCR_MEN | CCR_MSTA);
+ ret = i2c_mpc_wait_sr(i2c, CSR_MBB);
+ if (ret) {
+ dev_err(i2c->dev, "timeout waiting for CSR_MBB\n");
+ return;
+ }
+
+ val = readb(i2c->base + MPC_I2C_SR);
+
+ if (val & CSR_MAL) {
+ writeccr(i2c, 0x00);
+ writeccr(i2c, CCR_MSTA | CCR_RSVD);
+ writeccr(i2c, CCR_MEN | CCR_MSTA | CCR_RSVD);
+ ret = i2c_mpc_wait_sr(i2c, CSR_MBB);
+ if (ret) {
+ dev_err(i2c->dev, "timeout waiting for CSR_MBB\n");
+ return;
+ }
+ val = readb(i2c->base + MPC_I2C_DR);
+ ret = i2c_mpc_wait_sr(i2c, CSR_MIF);
+ if (ret) {
+ dev_err(i2c->dev, "timeout waiting for CSR_MIF\n");
+ return;
+ }
+ writeccr(i2c, CCR_MEN | CCR_RSVD);
+ } else {
+ val = readb(i2c->base + MPC_I2C_DR);
+ ret = i2c_mpc_wait_sr(i2c, CSR_MIF);
+ if (ret) {
+ dev_err(i2c->dev, "timeout waiting for CSR_MIF\n");
+ return;
+ }
+ writeccr(i2c, CCR_MEN);
+ }
+}
+
#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_PPC_MPC512x)
static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
{20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23},
@@ -581,7 +660,7 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) {
writeb(status & ~CSR_MAL,
i2c->base + MPC_I2C_SR);
- mpc_i2c_fixup(i2c);
+ i2c_recover_bus(&i2c->adap);
}
return -EIO;
}
@@ -617,7 +696,7 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) {
writeb(status & ~CSR_MAL,
i2c->base + MPC_I2C_SR);
- mpc_i2c_fixup(i2c);
+ i2c_recover_bus(&i2c->adap);
}
return -EIO;
}
@@ -632,6 +711,18 @@ static u32 mpc_functionality(struct i2c_adapter *adap)
| I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL;
}
+static int fsl_i2c_bus_recovery(struct i2c_adapter *adap)
+{
+ struct mpc_i2c *i2c = i2c_get_adapdata(adap);
+
+ if (i2c->has_errata_A004447)
+ mpc_i2c_fixup_A004447(i2c);
+ else
+ mpc_i2c_fixup(i2c);
+
+ return 0;
+}
+
static const struct i2c_algorithm mpc_algo = {
.master_xfer = mpc_xfer,
.functionality = mpc_functionality,
@@ -643,6 +734,10 @@ static struct i2c_adapter mpc_ops = {
.timeout = HZ,
};
+static struct i2c_bus_recovery_info fsl_i2c_recovery_info = {
+ .recover_bus = fsl_i2c_bus_recovery,
+};
+
static const struct of_device_id mpc_i2c_of_match[];
static int fsl_i2c_probe(struct platform_device *op)
{
@@ -727,6 +822,8 @@ static int fsl_i2c_probe(struct platform_device *op)
dev_info(i2c->dev, "timeout %u us\n", mpc_ops.timeout * 1000000 / HZ);
platform_set_drvdata(op, i2c);
+ if (of_property_read_bool(op->dev.of_node, "fsl,i2c-erratum-a004447"))
+ i2c->has_errata_A004447 = true;
i2c->adap = mpc_ops;
of_address_to_resource(op->dev.of_node, 0, &res);
@@ -735,6 +832,7 @@ static int fsl_i2c_probe(struct platform_device *op)
i2c_set_adapdata(&i2c->adap, i2c);
i2c->adap.dev.parent = &op->dev;
i2c->adap.dev.of_node = of_node_get(op->dev.of_node);
+ i2c->adap.bus_recovery_info = &fsl_i2c_recovery_info;
result = i2c_add_adapter(&i2c->adap);
if (result < 0) {
diff --git a/drivers/i2c/busses/i2c-msm-v2.c b/drivers/i2c/busses/i2c-msm-v2.c
index 870f69879237..31e4dc74aa83 100644
--- a/drivers/i2c/busses/i2c-msm-v2.c
+++ b/drivers/i2c/busses/i2c-msm-v2.c
@@ -2886,6 +2886,7 @@ static int i2c_msm_frmwrk_reg(struct platform_device *pdev,
ctrl->adapter.nr = pdev->id;
ctrl->adapter.dev.parent = &pdev->dev;
ctrl->adapter.dev.of_node = pdev->dev.of_node;
+ ctrl->adapter.retries = I2C_MSM_MAX_RETRIES;
ret = i2c_add_numbered_adapter(&ctrl->adapter);
if (ret) {
dev_err(ctrl->dev, "error i2c_add_adapter failed\n");
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 9b867169142f..42a998fa5f79 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -639,7 +639,7 @@ static int mtk_i2c_probe(struct platform_device *pdev)
return PTR_ERR(i2c->pdmabase);
irq = platform_get_irq(pdev, 0);
- if (irq <= 0)
+ if (irq < 0)
return irq;
init_completion(&i2c->msg_complete);
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index b61db9db3ca5..c85ac178c483 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -647,7 +647,8 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
}
if (dev->vendor == PCI_VENDOR_ID_AMD &&
- dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) {
+ (dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS ||
+ dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS)) {
retval = piix4_setup_sb800(dev, id, 1);
}
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 0d351954db02..8fca6e3dd750 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -297,11 +297,10 @@ static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why)
dev_err(dev, "IBMR: %08x IDBR: %08x ICR: %08x ISR: %08x\n",
readl(_IBMR(i2c)), readl(_IDBR(i2c)), readl(_ICR(i2c)),
readl(_ISR(i2c)));
- dev_dbg(dev, "log: ");
+ dev_err(dev, "log:");
for (i = 0; i < i2c->irqlogidx; i++)
- pr_debug("[%08x:%08x] ", i2c->isrlog[i], i2c->icrlog[i]);
-
- pr_debug("\n");
+ pr_cont(" [%03x:%05x]", i2c->isrlog[i], i2c->icrlog[i]);
+ pr_cont("\n");
}
#else /* ifdef DEBUG */
@@ -691,11 +690,9 @@ static inline void i2c_pxa_stop_message(struct pxa_i2c *i2c)
{
u32 icr;
- /*
- * Clear the STOP and ACK flags
- */
+ /* Clear the START, STOP, ACK, TB and MA flags */
icr = readl(_ICR(i2c));
- icr &= ~(ICR_STOP | ICR_ACKNAK);
+ icr &= ~(ICR_START | ICR_STOP | ICR_ACKNAK | ICR_TB | ICR_MA);
writel(icr, _ICR(i2c));
}
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index dfe1a53ce4ad..00b3178c36a7 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -386,13 +386,15 @@ static bool rcar_i2c_slave_irq(struct rcar_i2c_priv *priv)
rcar_i2c_write(priv, ICSIER, SDR | SSR | SAR);
}
- rcar_i2c_write(priv, ICSSR, ~SAR & 0xff);
+ /* Clear SSR, too, because of old STOPs to other clients than us */
+ rcar_i2c_write(priv, ICSSR, ~(SAR | SSR) & 0xff);
}
/* master sent stop */
if (ssr_filtered & SSR) {
i2c_slave_event(priv->slave, I2C_SLAVE_STOP, &value);
- rcar_i2c_write(priv, ICSIER, SAR | SSR);
+ rcar_i2c_write(priv, ICSCR, SIE | SDBS); /* clear our NACK */
+ rcar_i2c_write(priv, ICSIER, SAR);
rcar_i2c_write(priv, ICSSR, ~SSR & 0xff);
}
@@ -541,7 +543,7 @@ static int rcar_reg_slave(struct i2c_client *slave)
priv->slave = slave;
rcar_i2c_write(priv, ICSAR, slave->addr);
rcar_i2c_write(priv, ICSSR, 0);
- rcar_i2c_write(priv, ICSIER, SAR | SSR);
+ rcar_i2c_write(priv, ICSIER, SAR);
rcar_i2c_write(priv, ICSCR, SIE | SDBS);
return 0;
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 9096d17beb5b..587f1a5a1024 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -325,8 +325,8 @@ static void rk3x_i2c_handle_read(struct rk3x_i2c *i2c, unsigned int ipd)
if (!(ipd & REG_INT_MBRF))
return;
- /* ack interrupt */
- i2c_writel(i2c, REG_INT_MBRF, REG_IPD);
+ /* ack interrupt (read also produces a spurious START flag, clear it too) */
+ i2c_writel(i2c, REG_INT_MBRF | REG_INT_START, REG_IPD);
/* Can only handle a maximum of 32 bytes at a time */
if (len > 32)
diff --git a/drivers/i2c/busses/i2c-robotfuzz-osif.c b/drivers/i2c/busses/i2c-robotfuzz-osif.c
index ced9c6a308d1..09f27060feca 100644
--- a/drivers/i2c/busses/i2c-robotfuzz-osif.c
+++ b/drivers/i2c/busses/i2c-robotfuzz-osif.c
@@ -89,7 +89,7 @@ static int osif_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs,
}
}
- ret = osif_usb_read(adapter, OSIFI2C_STOP, 0, 0, NULL, 0);
+ ret = osif_usb_write(adapter, OSIFI2C_STOP, 0, 0, NULL, 0);
if (ret) {
dev_err(&adapter->dev, "failure sending STOP\n");
return -EREMOTEIO;
@@ -159,7 +159,7 @@ static int osif_probe(struct usb_interface *interface,
* Set bus frequency. The frequency is:
* 120,000,000 / ( 16 + 2 * div * 4^prescale).
* Using dev = 52, prescale = 0 give 100KHz */
- ret = osif_usb_read(&priv->adapter, OSIFI2C_SET_BIT_RATE, 52, 0,
+ ret = osif_usb_write(&priv->adapter, OSIFI2C_SET_BIT_RATE, 52, 0,
NULL, 0);
if (ret) {
dev_err(&interface->dev, "failure sending bit rate");
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 5df819610d52..44af640496bb 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -499,8 +499,10 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
/* cannot do this, the controller
* forces us to send a new START
* when we change direction */
-
+ dev_dbg(i2c->dev,
+ "missing START before write->read\n");
s3c24xx_i2c_stop(i2c, -EINVAL);
+ break;
}
goto retry_write;
@@ -1211,7 +1213,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
if (!(i2c->quirks & QUIRK_POLL)) {
i2c->irq = ret = platform_get_irq(pdev, 0);
- if (ret <= 0) {
+ if (ret < 0) {
dev_err(&pdev->dev, "cannot find IRQ\n");
clk_unprepare(i2c->clk);
return ret;
diff --git a/drivers/i2c/busses/i2c-sh7760.c b/drivers/i2c/busses/i2c-sh7760.c
index 24968384b401..c836c53caa3f 100644
--- a/drivers/i2c/busses/i2c-sh7760.c
+++ b/drivers/i2c/busses/i2c-sh7760.c
@@ -471,7 +471,10 @@ static int sh7760_i2c_probe(struct platform_device *pdev)
goto out2;
}
- id->irq = platform_get_irq(pdev, 0);
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ goto out3;
+ id->irq = ret;
id->adap.nr = pdev->id;
id->adap.algo = &sh7760_i2c_algo;
diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c
index 25020ec777c9..ee0a7d3dd0c6 100644
--- a/drivers/i2c/busses/i2c-st.c
+++ b/drivers/i2c/busses/i2c-st.c
@@ -399,6 +399,7 @@ static void st_i2c_wr_fill_tx_fifo(struct st_i2c_dev *i2c_dev)
/**
* st_i2c_rd_fill_tx_fifo() - Fill the Tx FIFO in read mode
* @i2c_dev: Controller's private data
+ * @max: Maximum amount of data to fill into the Tx FIFO
*
* This functions fills the Tx FIFO with fixed pattern when
* in read mode to trigger clock.
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index e56b774e7cf9..d0340b134e72 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -22,6 +22,7 @@
/* The I2C_RDWR ioctl code is written by Kolja Waschk <waschk@telos.de> */
+#include <linux/cdev.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/device.h>
@@ -46,10 +47,11 @@
struct i2c_dev {
struct list_head list;
struct i2c_adapter *adap;
- struct device *dev;
+ struct device dev;
+ struct cdev cdev;
};
-#define I2C_MINORS 256
+#define I2C_MINORS MINORMASK
static LIST_HEAD(i2c_dev_list);
static DEFINE_SPINLOCK(i2c_dev_list_lock);
@@ -89,12 +91,14 @@ static struct i2c_dev *get_free_i2c_dev(struct i2c_adapter *adap)
return i2c_dev;
}
-static void return_i2c_dev(struct i2c_dev *i2c_dev)
+static void put_i2c_dev(struct i2c_dev *i2c_dev, bool del_cdev)
{
spin_lock(&i2c_dev_list_lock);
list_del(&i2c_dev->list);
spin_unlock(&i2c_dev_list_lock);
- kfree(i2c_dev);
+ if (del_cdev)
+ cdev_device_del(&i2c_dev->cdev, &i2c_dev->dev);
+ put_device(&i2c_dev->dev);
}
static ssize_t name_show(struct device *dev,
@@ -144,7 +148,7 @@ static ssize_t i2cdev_read(struct file *file, char __user *buf, size_t count,
if (count > 8192)
count = 8192;
- tmp = kmalloc(count, GFP_KERNEL);
+ tmp = kzalloc(count, GFP_KERNEL);
if (tmp == NULL)
return -ENOMEM;
@@ -153,7 +157,8 @@ static ssize_t i2cdev_read(struct file *file, char __user *buf, size_t count,
ret = i2c_master_recv(client, tmp, count);
if (ret >= 0)
- ret = copy_to_user(buf, tmp, count) ? -EFAULT : ret;
+ if (copy_to_user(buf, tmp, ret))
+ ret = -EFAULT;
kfree(tmp);
return ret;
}
@@ -490,13 +495,8 @@ static int i2cdev_open(struct inode *inode, struct file *file)
unsigned int minor = iminor(inode);
struct i2c_client *client;
struct i2c_adapter *adap;
- struct i2c_dev *i2c_dev;
-
- i2c_dev = i2c_dev_get_by_minor(minor);
- if (!i2c_dev)
- return -ENODEV;
- adap = i2c_get_adapter(i2c_dev->adap->nr);
+ adap = i2c_get_adapter(minor);
if (!adap)
return -ENODEV;
@@ -545,6 +545,14 @@ static const struct file_operations i2cdev_fops = {
static struct class *i2c_dev_class;
+static void i2cdev_dev_release(struct device *dev)
+{
+ struct i2c_dev *i2c_dev;
+
+ i2c_dev = container_of(dev, struct i2c_dev, dev);
+ kfree(i2c_dev);
+}
+
static int i2cdev_attach_adapter(struct device *dev, void *dummy)
{
struct i2c_adapter *adap;
@@ -559,21 +567,25 @@ static int i2cdev_attach_adapter(struct device *dev, void *dummy)
if (IS_ERR(i2c_dev))
return PTR_ERR(i2c_dev);
- /* register this i2c device with the driver core */
- i2c_dev->dev = device_create(i2c_dev_class, &adap->dev,
- MKDEV(I2C_MAJOR, adap->nr), NULL,
- "i2c-%d", adap->nr);
- if (IS_ERR(i2c_dev->dev)) {
- res = PTR_ERR(i2c_dev->dev);
- goto error;
+ cdev_init(&i2c_dev->cdev, &i2cdev_fops);
+ i2c_dev->cdev.owner = THIS_MODULE;
+
+ device_initialize(&i2c_dev->dev);
+ i2c_dev->dev.devt = MKDEV(I2C_MAJOR, adap->nr);
+ i2c_dev->dev.class = i2c_dev_class;
+ i2c_dev->dev.parent = &adap->dev;
+ i2c_dev->dev.release = i2cdev_dev_release;
+ dev_set_name(&i2c_dev->dev, "i2c-%d", adap->nr);
+
+ res = cdev_device_add(&i2c_dev->cdev, &i2c_dev->dev);
+ if (res) {
+ put_i2c_dev(i2c_dev, false);
+ return res;
}
pr_debug("i2c-dev: adapter [%s] registered as minor %d\n",
adap->name, adap->nr);
return 0;
-error:
- return_i2c_dev(i2c_dev);
- return res;
}
static int i2cdev_detach_adapter(struct device *dev, void *dummy)
@@ -589,8 +601,7 @@ static int i2cdev_detach_adapter(struct device *dev, void *dummy)
if (!i2c_dev) /* attach_adapter must have failed */
return 0;
- return_i2c_dev(i2c_dev);
- device_destroy(i2c_dev_class, MKDEV(I2C_MAJOR, adap->nr));
+ put_i2c_dev(i2c_dev, true);
pr_debug("i2c-dev: adapter [%s] unregistered\n", adap->name);
return 0;
@@ -627,7 +638,7 @@ static int __init i2c_dev_init(void)
printk(KERN_INFO "i2c /dev entries driver\n");
- res = register_chrdev(I2C_MAJOR, "i2c", &i2cdev_fops);
+ res = register_chrdev_region(MKDEV(I2C_MAJOR, 0), I2C_MINORS, "i2c");
if (res)
goto out;
@@ -651,7 +662,7 @@ static int __init i2c_dev_init(void)
out_unreg_class:
class_destroy(i2c_dev_class);
out_unreg_chrdev:
- unregister_chrdev(I2C_MAJOR, "i2c");
+ unregister_chrdev_region(MKDEV(I2C_MAJOR, 0), I2C_MINORS);
out:
printk(KERN_ERR "%s: Driver Initialisation failed\n", __FILE__);
return res;
@@ -662,7 +673,7 @@ static void __exit i2c_dev_exit(void)
bus_unregister_notifier(&i2c_bus_type, &i2cdev_notifier);
i2c_for_each_dev(NULL, i2cdev_detach_adapter);
class_destroy(i2c_dev_class);
- unregister_chrdev(I2C_MAJOR, "i2c");
+ unregister_chrdev_region(MKDEV(I2C_MAJOR, 0), I2C_MINORS);
}
MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and "