msm8996: Restore GPS configs

Change-Id: I486ebf4e40dd962227553fbf2e44e4afaf15e628
Signed-off-by: Davide Garberi <dade.garberi@gmail.com>

6 files changed, 463 insertions, 105 deletions

diff --git a/gps/etc/flp.conf b/gps/etc/flp.conf
new file mode 100644
index 0000000..7d6002f
--- /dev/null
+++ b/gps/etc/flp.conf
@@ -0,0 +1,60 @@
+###################################
+#####       FLP settings      #####
+###################################
+
+###################################
+# FLP BATCHING SIZE
+###################################
+# The number of batched locations
+# requested to modem. The desired number
+# defined below may not be satisfied, as
+# the modem can only return the number
+# of batched locations that can be allocated,
+# which is limited by memory. The default
+# batch size defined as 20 as below.
+BATCH_SIZE=20
+
+###################################
+# FLP BATCHING SESSION TIMEOUT
+###################################
+# Duration with which batch session timeout
+# happens in milliseconds. If not specified
+# or set to zero, batching session timeout
+# defaults to 20 seconds by the modem.
+# BATCH_SESSION_TIMEOUT=20000
+
+###################################
+# FLP CAPABILITIES BIT MASK
+###################################
+# GEOFENCE = 0x01
+# BATCHING = 0x02
+# default = GEOFENCE | BATCHING
+CAPABILITIES=0x03
+
+###################################
+# FLP BATCHING ACCURACY
+###################################
+# Set to one of the defined values below
+# to define the accuracy of batching.
+# If not specified, accuracy defaults
+# to LOW.
+# FLP BATCHING ACCURACY values:
+# Low accuracy = 0
+# Medium accuracy = 1
+# High accuracy = 2
+ACCURACY=0
+
+###################################
+# FLP GEOFENCE RESPONSIVENESS
+###################################
+# If set to one of the defined values below,
+# it will override the responsiveness for
+# FLP geofence, which implements the fused
+# location API. If not set to a value defined
+# below, which is default, it will not
+# override the responsivness.
+# FLP_GEOFENCE_RESPONSIVENESS_OVERRIDE Values:
+# 1: LOW responsiveness
+# 2: MEDIUM responsiveness
+# 3: HIGH responsiveness
+FLP_GEOFENCE_RESPONSIVENESS_OVERRIDE = 0
diff --git a/gps/etc/gps.conf b/gps/etc/gps.conf
index 1027d76..2a8eb8c 100644
--- a/gps/etc/gps.conf
+++ b/gps/etc/gps.conf
@@ -1,8 +1,8 @@
 #Uncommenting these urls would only enable
 #the power up auto injection and force injection(test case).
-#XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra2.bin
-#XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra2.bin
-#XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra2.bin
+XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra3grc.bin
+XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra3grc.bin
+XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra3grc.bin
 
 #Version check for XTRA
 #DISABLE = 0
@@ -16,16 +16,19 @@ XTRA_VERSION_CHECK=0
 # _CLEAR = 0
 ERR_ESTIMATE=0
 
-#NTP server
-NTP_SERVER=time.izatcloud.net
-
-#XTRA CA path
-XTRA_CA_PATH=/system/etc/security/cacerts
+#Test
+NTP_SERVER=time.gpsonextra.net
+#Asia
+# NTP_SERVER=asia.pool.ntp.org
+#Europe
+# NTP_SERVER=europe.pool.ntp.org
+#North America
+# NTP_SERVER=north-america.pool.ntp.org
 
 # DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
 #               4 - Debug, 5 - Verbose
 # If DEBUG_LEVEL is commented, Android's logging levels will be used
-DEBUG_LEVEL = 3
+DEBUG_LEVEL = 2
 
 # Intermediate position report, 1=enable, 0=disable
 INTERMEDIATE_POS=0
@@ -41,12 +44,12 @@ INTERMEDIATE_POS=0
 SUPL_VER=0x10000
 
 # Emergency SUPL, 1=enable, 0=disable
-#SUPL_ES=0
+SUPL_ES=0
 
 #Choose PDN for Emergency SUPL
 #1 - Use emergency PDN
 #0 - Use regular SUPL PDN for Emergency SUPL
-#USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=0
+USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=1
 
 #SUPL_MODE is a bit mask set in config.xml per carrier by default.
 #If it is uncommented here, this value will overwrite the value from
@@ -111,97 +114,8 @@ SGLTE_TARGET=0
 # 0x1: RRC CPlane
 # 0x2: RRLP UPlane
 # 0x4: LLP Uplane
-A_GLONASS_POS_PROTOCOL_SELECT = 0
-
-##################################################
-# Select technology for LPPe Control Plane
-##################################################
-# 0x1: DBH for LPPe CP
-# 0x2: WLAN AP Measurements for LPPe CP
-# 0x4: SRN AP measurement for CP
-# 0x8: Sensor Barometer Measurement LPPe CP
-LPPE_CP_TECHNOLOGY = 0
-
-##################################################
-# Select technology for LPPe User Plane
-##################################################
-# 0x1: DBH for LPPe UP
-# 0x2: WLAN AP Measurements for LPPe UP
-# 0x4: SRN AP measurement for UP
-# 0x8: Sensor Barometer Measurement LPPe UP
-LPPE_UP_TECHNOLOGY = 0
-
-##################################################
-# AGPS_CONFIG_INJECT
-##################################################
-# enable/disable injection of AGPS configurations:
-#     SUPL_VER
-#     SUPL_HOST
-#     SUPL_PORT
-#     C2K_HOST
-#     C2K_PORT
-#     LPP_PROFILE
-#     A_GLONASS_POS_PROTOCOL_SELECT
-# 0: disable
-# 1: enable
-AGPS_CONFIG_INJECT = 1
-
-##################################################
-# GNSS settings for automotive use cases
-# Configurations in following section are
-# specific to automotive use cases, others
-# please do not change, keep the default values
-##################################################
-
-# AP Coarse Timestamp Uncertainty
-##################################################
-# default : 10
-# AP time stamp uncertainty, until GNSS receiver
-# is able to acquire better timing information
-AP_TIMESTAMP_UNCERTAINTY = 10
-
-##################################################
-# QDR engine availability status
-##################################################
-# 0 : NO QDR (default)
-# 1 : QDR enabled
-# This settings enables QDR Configuration for
-# automotive use case, if enabled then
-# DR_AP_Service needs to be enabled in izat.conf
-#EXTERNAL_DR_ENABLED = 0
-
-#####################################
-# DR_SYNC Pulse Availability
-#####################################
-# 0 : DR_SYNC pulse not available (default)
-# 1 : DR_SYNC pulse available
-# This configuration enables the driver to make use
-# of PPS events generated by DR_SYNC pulse
-# Standard Linux PPS driver needs to be enabled
-DR_SYNC_ENABLED = 0
-
-#####################################
-# PPS Device name
-#####################################
-PPS_DEVICENAME = /dev/pps0
-
-#####################################
-# AP Clock Accuracy
-#####################################
-# Quality of APPS processor clock (in PPM).
-# Value specified is used for calculation of
-# APPS time stamp uncertainty
-AP_CLOCK_PPM = 100
-
-#####################################
-# MAX ms difference to detect missing pulse
-#####################################
-# Specifies time threshold in ms to validate any missing PPS pulses
-MISSING_PULSE_TIME_DELTA = 900
-
-#####################################
-# Propagation time uncertainty
-#####################################
-# This settings enables time uncertainty propagation
-# logic incase of missing PPS pulse
-PROPAGATION_TIME_UNCERTAINTY = 1
+#ifndef zuoyonghua@oneplus.cn enable all bit mask for GLONASS
+#A_GLONASS_POS_PROTOCOL_SELECT = 0
+#else
+A_GLONASS_POS_PROTOCOL_SELECT = 15
+#endif
diff --git a/gps/etc/izat.conf b/gps/etc/izat.conf
new file mode 100644
index 0000000..d9fc913
--- /dev/null
+++ b/gps/etc/izat.conf
@@ -0,0 +1,198 @@
+#########################################
+# Log verbosity control for izat modules
+#########################################
+# OFF = 0, ERROR = 1, WARNING = 2, INFO = 3, DEBUG = 4, VERBOSE = 5
+IZAT_DEBUG_LEVEL = 2
+
+##################################################
+# Select WIFI Wait Timeout value in seconds for SUPL
+##################################################
+WIFI_WAIT_TIMEOUT_SELECT = 0
+
+################################
+# NLP Settings
+################################
+# NLP_MODE  1: GNP Only, 2: QNP Only, 3: Combo
+# NLP_TOLERANCE_TIME_FIRST: Time in ms used in Combo mode
+# to determine how much Tolerance for first position
+# NLP_TOLERANCE_TIME_AFTER: Time in ms used in Combo mode
+# to determine how much Tolerance for positions after first
+# NLP_THRESHOLD: Sets how many failures needed before
+# switching preferred NLP in Combo mode
+# NLP_ACCURACY_MULTIPLE: Determines how far off the accuracy
+# must be, in multiples, between two NLP location reports to
+# be considered much worse accuracy. Used in switching logic
+# NLP COMBO MODE USES QNP WITH NO EULA CONSENT: Determines
+# whether or not to still send network location requests to
+# QNP when the EULA is not consented to by the user. QNP can
+# still return ZPP locations or injected locations even
+# without EULA consent, but the uncertainty can be high.
+NLP_MODE = 1
+NLP_TOLERANCE_TIME_FIRST = 5000
+NLP_TOLERANCE_TIME_AFTER = 20000
+NLP_THRESHOLD = 3
+NLP_ACCURACY_MULTIPLE = 2
+NLP_COMBO_MODE_USES_QNP_WITH_NO_EULA_CONSENT = 1
+
+# Threshold period for ZPP triggers
+ZPP_TRIGGER_THRESHOLD=60000
+
+###################################
+# GEOFENCE SERVICES
+###################################
+# If set to one of the defined values below, it will override
+# the responsiveness for geofence services, which implements
+# the Proximity Alert API. If not set to a value defined below,
+# which is default, it will not override the responsivness.
+# The geofence HAL API is unaffected by this value.
+# GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE Values:
+# 1: LOW responsiveness
+# 2: MEDIUM responsiveness
+# 3: HIGH responsiveness
+GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE = 0
+
+#####################################
+# IZAT PREMIUM FEATURE SETTINGS
+#####################################
+#Possible states of a feature:
+#DISABLED
+#BASIC
+#PREMIUM
+
+#GTP_CELL_PROC valid options:
+# AP
+# MODEM
+GTP_CELL_PROC=MODEM
+
+#GTP_CELL valid modes:
+# DISABLED
+# BASIC
+GTP_CELL=DISABLED
+
+#GTP_WIFI valid modes:
+# DISABLED
+# BASIC
+GTP_WIFI=DISABLED
+
+#GTP_WAA valid modes:
+# DISABLED
+# BASIC
+GTP_WAA=DISABLED
+
+#SAP valid modes:
+# DISABLED
+# BASIC
+# PREMIUM
+SAP=PREMIUM
+
+#ODCPI valid modes:
+#DISABLED
+#BASIC
+ODCPI=BASIC
+
+#FREE_WIFI_SCAN_INJECT valid modes:
+#DISABLED
+#BASIC
+FREE_WIFI_SCAN_INJECT=BASIC
+
+#SUPL_WIFI valid modes:
+#DISABLED
+#BASIC
+SUPL_WIFI=BASIC
+
+#WIFI_SUPPLICANT_INFO valid modes:
+#DISABLED
+#BASIC
+WIFI_SUPPLICANT_INFO=BASIC
+
+#####################################
+# Location process launcher settings
+#####################################
+
+#Values for PROCESS_STATE:
+# ENABLED
+# DISABLED
+
+#FEATURE MASKS:
+# GTP-WIFI    0X03
+# GTP-AP-CELL 0X0c
+# GTP-MP-CELL 0xc00
+# GTP-WAA     0X300
+# SAP         0Xc0
+# ODCPI      0x1000
+# FREE_WIFI_SCAN_INJECT   0x2000
+# SUPL_WIFI   0x4000
+# WIFI_SUPPLICANT_INFO   0x8000
+
+#Values for PLATFORMS can be:
+#1. Any valid values obtained from ro.board.platform separated by single space. For example: msm8960 msm8226
+#2. 'all' or 'all exclude' -> for All platforms
+#3. 'all exclude XXXX' -> All platforms exclude XXXX. For example: all exclude msm8937
+
+#Values for BASEBAND can be:
+#1. Any valid values obtained from ro.baseband separated by single space. For example: sglte sglte2
+#2. 'all' or 'all exclude' -> for all basebands
+#3. 'all exclude XXXX' -> All basebands exclude XXXX. For example: all exclude sglte
+
+#Valyes for LEAN_TARGETS can be:
+#ENABLED  -> if this process is supposed to run on lean and mean targets
+#DISABLED -> if this process is to be disabled on lean and mean targets
+PROCESS_NAME=/system/bin/garden_app
+PROCESS_ARGUMENT=-u 0 -q 0 -j 0 -g 0 -l 0 -Z 0 -T 1
+PROCESS_STATE=ENABLED
+PROCESS_GROUPS=gps net_raw
+PREMIUM_FEATURE=0
+IZAT_FEATURE_MASK=0
+PLATFORMS=all
+BASEBAND=auto
+LEAN_TARGETS=DISABLED
+
+PROCESS_NAME=/system/bin/gpsone_daemon
+PROCESS_ARGUMENT=
+PROCESS_STATE=ENABLED
+PROCESS_GROUPS=inet net_raw
+PREMIUM_FEATURE=0
+IZAT_FEATURE_MASK=0
+PLATFORMS=msm7630_fusion
+BASEBAND=svlte2a sglte sglte2
+LEAN_TARGETS=DISABLED
+
+PROCESS_NAME=/system/bin/lowi-server
+PROCESS_ARGUMENT=
+PROCESS_STATE=ENABLED
+PROCESS_GROUPS=gps net_admin wifi inet qcom_diag net_raw
+PREMIUM_FEATURE=0
+IZAT_FEATURE_MASK=0xf303
+PLATFORMS=all
+BASEBAND=all
+LEAN_TARGETS=DISABLED
+
+PROCESS_NAME=/system/bin/xtwifi-inet-agent
+PROCESS_ARGUMENT=
+PROCESS_STATE=ENABLED
+PROCESS_GROUPS=inet gps
+PREMIUM_FEATURE=1
+IZAT_FEATURE_MASK=0xc0f
+PLATFORMS=all
+BASEBAND=all
+LEAN_TARGETS=DISABLED
+
+PROCESS_NAME=/system/bin/xtwifi-client
+PROCESS_ARGUMENT=
+PROCESS_STATE=ENABLED
+PROCESS_GROUPS=net_admin wifi inet gps net_raw rfs_shared
+PREMIUM_FEATURE=1
+IZAT_FEATURE_MASK=0xf0f
+PLATFORMS=all
+BASEBAND=all
+LEAN_TARGETS=DISABLED
+
+PROCESS_NAME=/system/vendor/bin/slim_daemon
+PROCESS_ARGUMENT=
+PROCESS_STATE=ENABLED
+PROCESS_GROUPS=gps net_raw qcom_diag
+PREMIUM_FEATURE=1
+IZAT_FEATURE_MASK=0xf0
+PLATFORMS=all
+BASEBAND=all
+LEAN_TARGETS=DISABLED
diff --git a/gps/etc/lowi.conf b/gps/etc/lowi.conf
new file mode 100644
index 0000000..cfadcb2
--- /dev/null
+++ b/gps/etc/lowi.conf
@@ -0,0 +1,51 @@
+#*====*====*====*====*====*====*====*====*====*====*====*====*====*====*====*
+#
+# LOWI Config file
+#
+# GENERAL DESCRIPTION
+#  This file contains the config params for LOWI
+#
+# Copyright (c) 2012-2013 Qualcomm Atheros, Inc.
+#  All Rights Reserved.
+#  Qualcomm Atheros Confidential and Proprietary.
+#
+# Export of this technology or software is regulated by the U.S. Government.
+# Diversion contrary to U.S. law prohibited.
+#=============================================================================*/
+
+# X86 ONLY - UBUNTU:
+# Copy this file in the same directory where the executable is
+
+# The RSSI threshold used in the RTT outlier detection in half decibels. Default value recommended by the
+# system team currently is -140 (corresponding to -70 dB).
+LOWI_RSSI_THRESHOLD_FOR_RTT = -140
+
+# Number of measurment per AP for RTS/CTS
+LOWI_RTS_CTS_NUM_MEAS = 5
+
+# Maximum Number of Outstanding Requests supported
+LOWI_MAX_OUTSTANDING_REQUEST = 255
+
+# Maximum number of records in Cache
+LOWI_MAX_NUM_CACHE_RECORDS = 200
+
+# Default threshold before issuing another fresh scan (ms)
+LOWI_FRESH_SCAN_THRESHOLD = 500
+
+# Timeout in case no result is reported by the driver (seconds)
+LOWI_NO_RESULT_WAIT_TOLERANCE = 10
+
+# Use Fake Wifi driver. Only valid for engineering builds
+LOWI_USE_FAKE_WIFI_DRIVER = 0
+
+# Use ROME Wifi driver. Only valid for engineering builds
+# Will be removed later only for development support
+LOWI_USE_ROME_WIFI_DRIVER = 0
+
+# Use LOWI LP.
+# When enabled the Discovery Request will be routed to LOWI-LP
+LOWI_USE_LOWI_LP = 1
+
+# Log level
+# EL_LOG_OFF = 0, EL_ERROR = 1, EL_WARNING = 2, EL_INFO = 3, EL_DEBUG = 4, EL_VERBOSE = 5, EL_LOG_ALL = 100
+LOWI_LOG_LEVEL = 2
diff --git a/gps/etc/sap.conf b/gps/etc/sap.conf
new file mode 100644
index 0000000..3e5b508
--- /dev/null
+++ b/gps/etc/sap.conf
@@ -0,0 +1,53 @@
+################################
+# Sensor Settings
+################################
+#The following parameters are optional.
+#Internal defaults support MEMS sensors
+#native to most handset devices.
+#Device specific sensor characterization
+#for improved performance is possible as
+#described in SAP application notes.
+#GYRO_BIAS_RANDOM_WALK=
+#ACCEL_RANDOM_WALK_SPECTRAL_DENSITY=
+#ANGLE_RANDOM_WALK_SPECTRAL_DENSITY=
+#RATE_RANDOM_WALK_SPECTRAL_DENSITY=
+#VELOCITY_RANDOM_WALK_SPECTRAL_DENSITY=
+
+# Sensor Sampling Rate Parameters for Low-Data Rate Filter (should be greater than 0)
+# used in loc_eng_reinit
+SENSOR_ACCEL_BATCHES_PER_SEC=2
+SENSOR_ACCEL_SAMPLES_PER_BATCH=5
+SENSOR_GYRO_BATCHES_PER_SEC=2
+SENSOR_GYRO_SAMPLES_PER_BATCH=5
+# Sensor Sampling Rate Parameters for High-Data Rate Filter (should be greater than 0)
+SENSOR_ACCEL_BATCHES_PER_SEC_HIGH=4
+SENSOR_ACCEL_SAMPLES_PER_BATCH_HIGH=25
+SENSOR_GYRO_BATCHES_PER_SEC_HIGH=4
+SENSOR_GYRO_SAMPLES_PER_BATCH_HIGH=25
+
+# Sensor Control Mode (0=AUTO, 1=FORCE_ON)
+# used in loc_eng_reinit
+SENSOR_CONTROL_MODE=1
+
+# Enable or Disable Sensors for GPS use (0=Enable, 1=Disable)
+# used in loc_eng_reinit
+SENSOR_USAGE=0
+
+# Choose GSIFF sensor provider (1=Snapdragon Sensors Core, 2=Android NDK)
+SENSOR_PROVIDER=1
+
+# Bit mask used to define which sensor algorithms are used.
+# Setting each bit has the following definition:
+#  0x1 - DISABLE_INS_POSITIONING_FILTER
+#  0x0 - ENABLE_INS_POSITIONING_FILTER
+SENSOR_ALGORITHM_CONFIG_MASK=0x00
+
+# Time source used by Sensor HAL
+# Setting this value controls accuracy of location sensor services.
+#  0 - Unknown
+#  1 - CLOCK_BOOTTIME
+#  2 - CLOCK_MONOTONIC
+#  3 - CLOCK_REALTIME
+#  4 - CLOCK_BOOTTIME using Alarm timer interface
+NDK_PROVIDER_TIME_SOURCE=1
+
diff --git a/gps/etc/xtwifi.conf b/gps/etc/xtwifi.conf
new file mode 100644
index 0000000..fc17faa
--- /dev/null
+++ b/gps/etc/xtwifi.conf
@@ -0,0 +1,82 @@
+#GTP AP Project client core config file
+#
+#GENERAL DESCRIPTION
+#This is used by client core
+#
+#Copyright (c) 2012-2014 Qualcomm Atheros, Inc.
+#All Rights Reserved.
+#Qualcomm Atheros Confidential and Proprietary.
+
+# Log verbosity control for most of the GTP WiFi system, including native and
+# Java componenets
+# OFF = 0, ERROR = 1, WARNING = 2, INFO = 3, DEBUG = 4, VERBOSE = 5, ALL = 100
+DEBUG_GLOBAL_LOG_LEVEL = 2
+
+# this is used at the server side to distinguish uploads from different maker/model
+# default "Qualcomm"
+OEM_ID_IN_REQUEST_TO_SERVER = "Qualcomm"
+
+# this is used at the server side to distinguish uploads from different maker/model
+# default "UNKNOWN"
+MODEL_ID_IN_REQUEST_TO_SERVER = "UNKNOWN"
+
+##############################################################################
+# GTP-WiFi positioning config                                                #
+##############################################################################
+
+# URL for the server position request
+XT_SERVER_ROOT_URL = https://gtpa1.izatcloud.net:443/uds/v2
+
+# size, in bytes, of the cache on device
+SIZE_BYTE_TOTAL_CACHE = 5000000
+
+# value 0: (default) use the async LOWI wifi scanner
+# value 10: FAKE AP wifi scanner
+WIFI_SCANNER_CHOICE = 0
+
+##############################################################################
+# XT-WiFi crowd sourcing config                                              #
+##############################################################################
+# Use server suggestion for crowd sourcing configuration
+ENABLE_SERVER_SUGGESTION_FOR_CROWD_SOURCING = 1
+
+# Maximum number of APs to be collected for upload
+NUM_MAX_AP_PER_UPLOAD = 16383
+# Number of minutes between upload: 24 hours
+INTERVAL_MIN_UPLOAD = 1440
+# Number of minutes between forced upload: 5 days
+INTERVAL_MIN_FORCED_UPLOAD = 7200
+
+# The minimum time between two collected AP data sets in seconds
+INTERVAL_SEC_AP_SETS_COLLECT = 10
+# Timeout for scan interval when phone is on: 600 seconds (10 minute)
+INTERVAL_SEC_SCAN = 600
+# Timeout for scan interval when phone has not continusouly on for INTERVAL_MIN_SCAN
+INTERVAL_MIN_FORCED_SCAN = 480
+
+# Maximum number of Cell DB records for upload
+WWAN_MAX_CELLDB_RECORDS_PER_UPLOAD = 1000
+
+##############################################################################
+# GTP AP cell config                                                         #
+##############################################################################
+# This item specifies the RIL server name.
+# This configure item can not be removed in Android target.
+XTRAT_WWAN_LITE_LOC_RIL_SERVER_NAME = "OS-Agent"
+
+# Maximum total number of SNA records cached in mobile storage.
+# Max allowed value is 10000
+# Min value is 100
+XTRAT_WWAN_LITE_MAX_DL_SNA = 10000
+
+# Maximum total number of BSA records cached in mobile storage.
+# Max allowed value is 65000
+# Min value is 100
+XTRAT_WWAN_LITE_MAX_DL_BSA = 65000
+
+##############################################################################
+# Qualcomm Network Location Provider config                                  #
+##############################################################################
+# Accuracy Threshold for NLP position. Position exceeds thsi threshold will be filtered out.
+# Default is 25000 meters.
+LARGE_ACCURACY_THRESHOLD_TO_FILTER_NLP_POSITION = 25000
\ No newline at end of file