Initialising brunch based on davidevinavil device tree (CM14.0 branch)

2 files changed, 84 insertions, 31 deletions

diff --git a/gps/etc/gps.conf b/gps/etc/gps.conf
index ea1b9ac..c74e826 100644
--- a/gps/etc/gps.conf
+++ b/gps/etc/gps.conf
@@ -4,12 +4,6 @@
 #XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra2.bin
 #XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra2.bin
 
-#ifdef VENDOR_EDIT 
-XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra3grc.bin 
-XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra3grc.bin 
-XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra3grc.bin 
-#endif
-
 #Version check for XTRA
 #DISABLE = 0
 #AUTO    = 1
@@ -22,19 +16,13 @@ XTRA_VERSION_CHECK=0
 # _CLEAR = 0
 ERR_ESTIMATE=0
 
-#Test
-NTP_SERVER=time.gpsonextra.net
-#Asia
-# NTP_SERVER=asia.pool.ntp.org
-#Europe
-# NTP_SERVER=europe.pool.ntp.org
-#North America
-# NTP_SERVER=north-america.pool.ntp.org
+#NTP server
+NTP_SERVER=time.izatcloud.net
 
 # DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
 #               4 - Debug, 5 - Verbose
 # If DEBUG_LEVEL is commented, Android's logging levels will be used
-DEBUG_LEVEL = 2
+DEBUG_LEVEL = 3
 
 # Intermediate position report, 1=enable, 0=disable
 INTERMEDIATE_POS=0
@@ -55,7 +43,7 @@ SUPL_ES=0
 #Choose PDN for Emergency SUPL
 #1 - Use emergency PDN
 #0 - Use regular SUPL PDN for Emergency SUPL
-USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=1
+USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=0
 
 #SUPL_MODE is a bit mask set in config.xml per carrier by default.
 #If it is uncommented here, this value will overwrite the value from
@@ -120,8 +108,73 @@ SGLTE_TARGET=0
 # 0x1: RRC CPlane
 # 0x2: RRLP UPlane
 # 0x4: LLP Uplane
-#ifndef zuoyonghua@oneplus.cn enable all bit mask for GLONASS
-#A_GLONASS_POS_PROTOCOL_SELECT = 0
-#else 
-A_GLONASS_POS_PROTOCOL_SELECT = 15
-#endif
+A_GLONASS_POS_PROTOCOL_SELECT = 0
+
+##################################################
+# Select technology for LPPe Control Plane
+##################################################
+# 0x1: DBH for LPPe CP
+# 0x2: WLAN AP Measurements for LPPe CP
+LPPE_CP_TECHNOLOGY = 0
+
+##################################################
+# Select technology for LPPe User Plane
+##################################################
+# 0x1: DBH for LPPe UP
+# 0x2: WLAN AP Measurements for LPPe UP
+LPPE_UP_TECHNOLOGY = 0
+
+##################################################
+# AGPS_CONFIG_INJECT
+##################################################
+# enable/disable injection of AGPS configurations:
+#     SUPL_VER
+#     SUPL_HOST
+#     SUPL_PORT
+#     C2K_HOST
+#     C2K_PORT
+#     LPP_PROFILE
+#     A_GLONASS_POS_PROTOCOL_SELECT
+# 0: disable
+# 1: enable
+AGPS_CONFIG_INJECT = 1
+# AP Coarse Timestamp Uncertainty
+##################################################
+# default : 10
+# or as per clock uncertainty of product
+AP_TIMESTAMP_UNCERTAINTY = 10
+
+#####################################
+# GNSS PPS settings
+#####################################
+#AP DR engine availability status
+# 0 : NO AP DR (default)
+# 1 : AP DR enabled
+#EXTERNAL_DR_ENABLED = 0
+
+#####################################
+#DR_SYNC Pulse Availability
+#####################################
+# 0 : DR_SYNC pulse not available (default)
+# 1 : DR_SYNC pulse available
+DR_SYNC_ENABLED = 0
+
+#####################################
+#PPS Device name
+#####################################
+PPS_DEVICENAME = /dev/pps0
+
+#####################################
+#AP Clock Accuracy
+#####################################
+AP_CLOCK_PPM = 100
+
+#####################################
+#MAX ms difference to detect missing pulse
+#####################################
+MISSING_PULSE_TIME_DELTA = 900
+
+#####################################
+#Propagation time uncertainty
+#####################################
+PROPAGATION_TIME_UNCERTAINTY = 1
diff --git a/gps/etc/izat.conf b/gps/etc/izat.conf
index 1877099..d9fc913 100644
--- a/gps/etc/izat.conf
+++ b/gps/etc/izat.conf
@@ -83,27 +83,27 @@ GTP_WAA=DISABLED
 # DISABLED
 # BASIC
 # PREMIUM
-SAP=BASIC
+SAP=PREMIUM
 
 #ODCPI valid modes:
 #DISABLED
 #BASIC
-ODCPI=DISABLED
+ODCPI=BASIC
 
 #FREE_WIFI_SCAN_INJECT valid modes:
 #DISABLED
 #BASIC
-FREE_WIFI_SCAN_INJECT=DISABLED
+FREE_WIFI_SCAN_INJECT=BASIC
 
 #SUPL_WIFI valid modes:
 #DISABLED
 #BASIC
-SUPL_WIFI=DISABLED
+SUPL_WIFI=BASIC
 
 #WIFI_SUPPLICANT_INFO valid modes:
 #DISABLED
 #BASIC
-WIFI_SUPPLICANT_INFO=DISABLED
+WIFI_SUPPLICANT_INFO=BASIC
 
 #####################################
 # Location process launcher settings
@@ -139,7 +139,7 @@ WIFI_SUPPLICANT_INFO=DISABLED
 #DISABLED -> if this process is to be disabled on lean and mean targets
 PROCESS_NAME=/system/bin/garden_app
 PROCESS_ARGUMENT=-u 0 -q 0 -j 0 -g 0 -l 0 -Z 0 -T 1
-PROCESS_STATE=DISABLED
+PROCESS_STATE=ENABLED
 PROCESS_GROUPS=gps net_raw
 PREMIUM_FEATURE=0
 IZAT_FEATURE_MASK=0
@@ -149,7 +149,7 @@ LEAN_TARGETS=DISABLED
 
 PROCESS_NAME=/system/bin/gpsone_daemon
 PROCESS_ARGUMENT=
-PROCESS_STATE=DISABLED
+PROCESS_STATE=ENABLED
 PROCESS_GROUPS=inet net_raw
 PREMIUM_FEATURE=0
 IZAT_FEATURE_MASK=0
@@ -159,7 +159,7 @@ LEAN_TARGETS=DISABLED
 
 PROCESS_NAME=/system/bin/lowi-server
 PROCESS_ARGUMENT=
-PROCESS_STATE=DISABLED
+PROCESS_STATE=ENABLED
 PROCESS_GROUPS=gps net_admin wifi inet qcom_diag net_raw
 PREMIUM_FEATURE=0
 IZAT_FEATURE_MASK=0xf303
@@ -169,7 +169,7 @@ LEAN_TARGETS=DISABLED
 
 PROCESS_NAME=/system/bin/xtwifi-inet-agent
 PROCESS_ARGUMENT=
-PROCESS_STATE=DISABLED
+PROCESS_STATE=ENABLED
 PROCESS_GROUPS=inet gps
 PREMIUM_FEATURE=1
 IZAT_FEATURE_MASK=0xc0f
@@ -179,7 +179,7 @@ LEAN_TARGETS=DISABLED
 
 PROCESS_NAME=/system/bin/xtwifi-client
 PROCESS_ARGUMENT=
-PROCESS_STATE=DISABLED
+PROCESS_STATE=ENABLED
 PROCESS_GROUPS=net_admin wifi inet gps net_raw rfs_shared
 PREMIUM_FEATURE=1
 IZAT_FEATURE_MASK=0xf0f