msm8996-common: Nuke the GPS Hal

* Just to make a clean import

Signed-off-by: Davide Garberi <dade.garberi@gmail.com>

6 files changed, 0 insertions, 662 deletions

diff --git a/gps/etc/flp.conf b/gps/etc/flp.conf
deleted file mode 100644
index a424121..0000000
--- a/gps/etc/flp.conf
+++ /dev/null
@@ -1,60 +0,0 @@
-###################################
-#####       FLP settings      #####
-###################################
-
-###################################
-# FLP BATCHING SIZE
-###################################
-# The number of batched locations
-# requested to modem. The desired number
-# defined below may not be satisfied, as
-# the modem can only return the number
-# of batched locations that can be allocated,
-# which is limited by memory. The default
-# batch size defined as 20 as below.
-BATCH_SIZE=20
-
-###################################
-# FLP BATCHING SESSION TIMEOUT
-###################################
-# Duration with which batch session timeout
-# happens in milliseconds. If not specified
-# or set to zero, batching session timeout
-# defaults to 20 seconds by the modem.
-# BATCH_SESSION_TIMEOUT=20000
-
-###################################
-# FLP CAPABILITIES BIT MASK
-###################################
-# GEOFENCE = 0x01
-# BATCHING = 0x02
-# default = GEOFENCE | BATCHING
-CAPABILITIES=0x03
-
-###################################
-# FLP BATCHING ACCURACY
-###################################
-# Set to one of the defined values below
-# to define the accuracy of batching.
-# If not specified, accuracy defaults
-# to LOW.
-# FLP BATCHING ACCURACY values:
-# Low accuracy = 0
-# Medium accuracy = 1
-# High accuracy = 2
-ACCURACY=1
-
-###################################
-# FLP GEOFENCE RESPONSIVENESS
-###################################
-# If set to one of the defined values below,
-# it will override the responsiveness for
-# FLP geofence, which implements the fused
-# location API. If not set to a value defined
-# below, which is default, it will not
-# override the responsivness.
-# FLP_GEOFENCE_RESPONSIVENESS_OVERRIDE Values:
-# 1: LOW responsiveness
-# 2: MEDIUM responsiveness
-# 3: HIGH responsiveness
-FLP_GEOFENCE_RESPONSIVENESS_OVERRIDE = 0
diff --git a/gps/etc/gps.conf b/gps/etc/gps.conf
deleted file mode 100644
index 2229bc2..0000000
--- a/gps/etc/gps.conf
+++ /dev/null
@@ -1,180 +0,0 @@
-#Uncommenting these urls would only enable
-#the power up auto injection and force injection(test case).
-XTRA_SERVER_1=https://xtrapath1.izatcloud.net/xtra3grc.bin
-XTRA_SERVER_2=https://xtrapath2.izatcloud.net/xtra3grc.bin
-XTRA_SERVER_3=https://xtrapath3.izatcloud.net/xtra3grc.bin
-
-#Version check for XTRA
-#DISABLE = 0
-#AUTO    = 1
-#XTRA2   = 2
-#XTRA3   = 3
-XTRA_VERSION_CHECK=0
-
-# Error Estimate
-# _SET = 1
-# _CLEAR = 0
-ERR_ESTIMATE=0
-
-#NTP server
-NTP_SERVER=pool.ntp.org
-
-# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
-#               4 - Debug, 5 - Verbose
-# If DEBUG_LEVEL is commented, Android's logging levels will be used
-DEBUG_LEVEL = 3
-
-# Intermediate position report, 1=enable, 0=disable
-INTERMEDIATE_POS=1
-
-# Below bit mask configures how GPS functionalities
-# should be locked when user turns off GPS on Settings
-# Set bit 0x1 if MO GPS functionalities are to be locked
-# Set bit 0x2 if NI GPS functionalities are to be locked
-# default - non is locked for backward compatibility
-#GPS_LOCK = 0
-
-# supl version 2.0
-SUPL_VER=0x20000
-
-# Emergency SUPL, 1=enable, 0=disable
-SUPL_ES=0
-
-#Choose PDN for Emergency SUPL
-#1 - Use emergency PDN
-#0 - Use regular SUPL PDN for Emergency SUPL
-USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=0
-
-#SUPL_MODE is a bit mask set in config.xml per carrier by default.
-#If it is uncommented here, this value will overwrite the value from
-#config.xml.
-#MSA=0X2
-#MSB=0X1
-SUPL_MODE=3
-
-# GPS Capabilities bit mask
-# SCHEDULING = 0x01
-# MSB = 0x02
-# MSA = 0x04
-# ON_DEMAND_TIME = 0x10
-# GEOFENCE = 0x20
-# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE
-CAPABILITIES=0x37
-
-# Accuracy threshold for intermediate positions
-# less accurate positions are ignored, 0 for passing all positions
-ACCURACY_THRES=100
-
-################################
-##### AGPS server settings #####
-################################
-
-# FOR SUPL SUPPORT, set the following
-SUPL_HOST=supl.google.com
-SUPL_PORT=7276
-
-# FOR C2K PDE SUPPORT, set the following
-# C2K_HOST=c2k.pde.com or IP
-# C2K_PORT=1234
-
-# Bitmask of slots that are available
-# for write/install to, where 1s indicate writable,
-# and the default value is 0 where no slots
-# are writable. For example, AGPS_CERT_WRITABLE_MASK
-# of b1000001010 makes 3 slots available
-# and the remaining 7 slots unwritable.
-#AGPS_CERT_WRITABLE_MASK=0
-
-####################################
-#  LTE Positioning Profile Settings
-####################################
-# 0: Enable RRLP on LTE(Default)
-# 1: Enable LPP_User_Plane on LTE
-# 2: Enable LPP_Control_Plane
-# 3: Enable both LPP_User_Plane and LPP_Control_Plane
-LPP_PROFILE = 2
-
-################################
-# EXTRA SETTINGS
-################################
-# NMEA provider (1=Modem Processor, 0=Application Processor)
-NMEA_PROVIDER=0
-# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
-SGLTE_TARGET=0
-
-##################################################
-# Select Positioning Protocol on A-GLONASS system
-##################################################
-# 0x1: RRC CPlane
-# 0x2: RRLP UPlane
-# 0x4: LLP Uplane
-A_GLONASS_POS_PROTOCOL_SELECT = 0
-
-##################################################
-# Select technology for LPPe Control Plane
-##################################################
-# 0x1: DBH for LPPe CP
-# 0x2: WLAN AP Measurements for LPPe CP
-LPPE_CP_TECHNOLOGY = 0
-
-##################################################
-# Select technology for LPPe User Plane
-##################################################
-# 0x1: DBH for LPPe UP
-# 0x2: WLAN AP Measurements for LPPe UP
-LPPE_UP_TECHNOLOGY = 0
-
-##################################################
-# AGPS_CONFIG_INJECT
-##################################################
-# enable/disable injection of AGPS configurations:
-#     SUPL_VER
-#     SUPL_HOST
-#     SUPL_PORT
-#     C2K_HOST
-#     C2K_PORT
-#     LPP_PROFILE
-#     A_GLONASS_POS_PROTOCOL_SELECT
-# 0: disable
-# 1: enable
-AGPS_CONFIG_INJECT = 1
-# AP Coarse Timestamp Uncertainty
-##################################################
-# default : 10
-# or as per clock uncertainty of product
-AP_TIMESTAMP_UNCERTAINTY = 10
-
-#####################################
-# GNSS PPS settings
-#####################################
-#AP DR engine availability status
-# 0 : NO AP DR (default)
-# 1 : AP DR enabled
-#EXTERNAL_DR_ENABLED = 0
-
-#####################################
-#DR_SYNC Pulse Availability
-#####################################
-# 0 : DR_SYNC pulse not available (default)
-# 1 : DR_SYNC pulse available
-DR_SYNC_ENABLED = 0
-
-#####################################
-#PPS Device name
-#####################################
-PPS_DEVICENAME = /dev/pps0
-
-#####################################
-#AP Clock Accuracy
-#####################################
-AP_CLOCK_PPM = 100
-
-#####################################
-#MAX ms difference to detect missing pulse
-#####################################
-MISSING_PULSE_TIME_DELTA = 900
-
-#####################################
-#Propagation time uncertainty
-#####################################
-PROPAGATION_TIME_UNCERTAINTY = 1
diff --git a/gps/etc/izat.conf b/gps/etc/izat.conf
deleted file mode 100644
index 30695aa..0000000
--- a/gps/etc/izat.conf
+++ /dev/null
@@ -1,222 +0,0 @@
-#########################################
-# Log verbosity control for izat modules
-#########################################
-# OFF = 0, ERROR = 1, WARNING = 2, INFO = 3, DEBUG = 4, VERBOSE = 5
-IZAT_DEBUG_LEVEL = 2
-
-##################################################
-# Select WIFI Wait Timeout value in seconds for SUPL
-##################################################
-WIFI_WAIT_TIMEOUT_SELECT = 0
-
-################################
-# NLP Settings
-################################
-# NLP_MODE  1: OSNLP Only, 2: QNP Only, 3: Combo, 4: QNP preferred
-# NLP_TOLERANCE_TIME_FIRST: Time in ms used in Combo mode
-# to determine how much Tolerance for first position
-# NLP_TOLERANCE_TIME_AFTER: Time in ms used in Combo mode
-# to determine how much Tolerance for positions after first
-# NLP_THRESHOLD: Sets how many failures needed before
-# switching preferred NLP in Combo mode
-# NLP_ACCURACY_MULTIPLE: Determines how far off the accuracy
-# must be, in multiples, between two NLP location reports to
-# be considered much worse accuracy. Used in switching logic
-# NLP COMBO MODE USES QNP WITH NO EULA CONSENT: Determines
-# whether or not to still send network location requests to
-# QNP when the EULA is not consented to by the user. QNP can
-# still return ZPP locations or injected locations even
-# without EULA consent, but the uncertainty can be high.
-# QNP preferred mode prefers QNP when there is EULA consent,
-# otherwise OSNLP is used.
-NLP_MODE = 3
-NLP_MODE_EMERGENCY = 2
-NLP_TOLERANCE_TIME_FIRST = 5000
-NLP_TOLERANCE_TIME_AFTER = 20000
-NLP_THRESHOLD = 3
-NLP_ACCURACY_MULTIPLE = 2
-NLP_COMBO_MODE_USES_QNP_WITH_NO_EULA_CONSENT = 1
-
-#########################################
-# NLP PACKAGE AND ACTION SETTINGS
-#########################################
-# OSNLP_PACKAGE/OSNLP_ACTION: name/action of default NLP package
-OSNLP_PACKAGE = com.google.android.gms
-OSNLP_ACTION = com.android.location.service.v3.NetworkLocationProvider
-# REGION_OSNLP_PACKAGE/REGION_OSNLP_ACTION:
-# These two values will be used as alternative
-# for particular region where default NLP is not functional.
-#REGION_OSNLP_PACKAGE = com.baidu.map.location
-#REGION_OSNLP_ACTION = com.android.location.service.v3.NetworkLocationProvider
-
-# Threshold period for ZPP triggers
-ZPP_TRIGGER_THRESHOLD=60000
-
-###################################
-# GEOFENCE SERVICES
-###################################
-# If set to one of the defined values below, it will override
-# the responsiveness for geofence services, which implements
-# the Proximity Alert API. If not set to a value defined below,
-# which is default, it will not override the responsivness.
-# The geofence HAL API is unaffected by this value.
-# GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE Values:
-# 1: LOW responsiveness
-# 2: MEDIUM responsiveness
-# 3: HIGH responsiveness
-GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE = 0
-
-#####################################
-# IZAT PREMIUM FEATURE SETTINGS
-#####################################
-#Possible states of a feature:
-#DISABLED
-#BASIC
-#PREMIUM
-
-#GTP_CELL_PROC valid options:
-# AP
-# MODEM
-GTP_CELL_PROC=MODEM
-
-#GTP_CELL valid modes:
-# DISABLED
-# BASIC
-GTP_CELL=BASIC
-
-#GTP_WIFI valid modes:
-# DISABLED
-# BASIC
-GTP_WIFI=BASIC
-
-#GTP_WAA valid modes:
-# DISABLED
-# BASIC
-GTP_WAA=DISABLED
-
-#SAP valid modes:
-# DISABLED
-# BASIC
-# PREMIUM
-SAP=PREMIUM
-
-#ODCPI valid modes:
-#DISABLED
-#BASIC
-ODCPI=BASIC
-
-#FREE_WIFI_SCAN_INJECT valid modes:
-#DISABLED
-#BASIC
-FREE_WIFI_SCAN_INJECT=BASIC
-
-#SUPL_WIFI valid modes:
-#DISABLED
-#BASIC
-SUPL_WIFI=BASIC
-
-#WIFI_SUPPLICANT_INFO valid modes:
-#DISABLED
-#BASIC
-WIFI_SUPPLICANT_INFO=BASIC
-
-#####################################
-# Location process launcher settings
-#####################################
-
-# DO NOT MODIFY
-# Modifying below attributes without
-# caution can have serious implications.
-
-#Values for PROCESS_STATE:
-# ENABLED
-# DISABLED
-
-#FEATURE MASKS:
-# GTP-WIFI    0X03
-# GTP-AP-CELL 0X0c
-# GTP-MP-CELL 0xc00
-# GTP-WAA     0X300
-# SAP         0Xc0
-# ODCPI      0x1000
-# FREE_WIFI_SCAN_INJECT   0x2000
-# SUPL_WIFI   0x4000
-# WIFI_SUPPLICANT_INFO   0x8000
-
-#Values for PLATFORMS can be:
-#1. Any valid values obtained from ro.board.platform separated by single space. For example: msm8960 msm8226
-#2. 'all' or 'all exclude' -> for All platforms
-#3. 'all exclude XXXX' -> All platforms exclude XXXX. For example: all exclude msm8937
-
-#Values for BASEBAND can be:
-#1. Any valid values obtained from ro.baseband separated by single space. For example: sglte sglte2
-#2. 'all' or 'all exclude' -> for all basebands
-#3. 'all exclude XXXX' -> All basebands exclude XXXX. For example: all exclude sglte
-PROCESS_NAME=/system/bin/DR_AP_Service
-PROCESS_ARGUMENT=
-PROCESS_STATE=DISABLED
-PROCESS_GROUPS=gps net_raw diag oem_2901
-PREMIUM_FEATURE=0
-IZAT_FEATURE_MASK=0
-PLATFORMS=all
-BASEBAND=all
-LEAN_TARGETS=DISABLED
-HARDWARE_TYPE=automotive
-
-#Valyes for LEAN_TARGETS can be:
-#ENABLED  -> if this process is supposed to run on lean and mean targets
-#DISABLED -> if this process is to be disabled on lean and mean targets
-PROCESS_NAME=/system/bin/garden_app
-PROCESS_ARGUMENT=-u 0 -q 0 -j 0 -g 0 -l 0 -Z 0 -T 1
-PROCESS_STATE=ENABLED
-PROCESS_GROUPS=gps
-PREMIUM_FEATURE=0
-IZAT_FEATURE_MASK=0
-PLATFORMS=all
-BASEBAND=all
-LEAN_TARGETS=DISABLED
-HARDWARE_TYPE=automotive
-
-PROCESS_NAME=/system/bin/gpsone_daemon
-PROCESS_ARGUMENT=
-PROCESS_STATE=ENABLED
-PROCESS_GROUPS=inet
-PREMIUM_FEATURE=0
-IZAT_FEATURE_MASK=0
-PLATFORMS=msm7630_fusion
-BASEBAND=svlte2a sglte sglte2
-LEAN_TARGETS=DISABLED
-HARDWARE_TYPE=all
-
-PROCESS_NAME=/system/bin/lowi-server
-PROCESS_ARGUMENT=
-PROCESS_STATE=ENABLED
-PROCESS_GROUPS=gps net_admin wifi inet oem_2901
-PREMIUM_FEATURE=0
-IZAT_FEATURE_MASK=0xf303
-PLATFORMS=all
-BASEBAND=all
-LEAN_TARGETS=DISABLED
-HARDWARE_TYPE=all
-
-PROCESS_NAME=/system/bin/xtwifi-inet-agent
-PROCESS_ARGUMENT=
-PROCESS_STATE=ENABLED
-PROCESS_GROUPS=inet gps
-PREMIUM_FEATURE=1
-IZAT_FEATURE_MASK=0xc0f
-PLATFORMS=all
-BASEBAND=all
-LEAN_TARGETS=DISABLED
-HARDWARE_TYPE=all
-
-PROCESS_NAME=/system/bin/xtwifi-client
-PROCESS_ARGUMENT=
-PROCESS_STATE=ENABLED
-PROCESS_GROUPS=wifi inet gps rfs_shared system
-PREMIUM_FEATURE=1
-IZAT_FEATURE_MASK=0xf0f
-PLATFORMS=all
-BASEBAND=all
-LEAN_TARGETS=DISABLED
-HARDWARE_TYPE=all
diff --git a/gps/etc/lowi.conf b/gps/etc/lowi.conf
deleted file mode 100644
index cfadcb2..0000000
--- a/gps/etc/lowi.conf
+++ /dev/null
@@ -1,51 +0,0 @@
-#*====*====*====*====*====*====*====*====*====*====*====*====*====*====*====*
-#
-# LOWI Config file
-#
-# GENERAL DESCRIPTION
-#  This file contains the config params for LOWI
-#
-# Copyright (c) 2012-2013 Qualcomm Atheros, Inc.
-#  All Rights Reserved.
-#  Qualcomm Atheros Confidential and Proprietary.
-#
-# Export of this technology or software is regulated by the U.S. Government.
-# Diversion contrary to U.S. law prohibited.
-#=============================================================================*/
-
-# X86 ONLY - UBUNTU:
-# Copy this file in the same directory where the executable is
-
-# The RSSI threshold used in the RTT outlier detection in half decibels. Default value recommended by the
-# system team currently is -140 (corresponding to -70 dB).
-LOWI_RSSI_THRESHOLD_FOR_RTT = -140
-
-# Number of measurment per AP for RTS/CTS
-LOWI_RTS_CTS_NUM_MEAS = 5
-
-# Maximum Number of Outstanding Requests supported
-LOWI_MAX_OUTSTANDING_REQUEST = 255
-
-# Maximum number of records in Cache
-LOWI_MAX_NUM_CACHE_RECORDS = 200
-
-# Default threshold before issuing another fresh scan (ms)
-LOWI_FRESH_SCAN_THRESHOLD = 500
-
-# Timeout in case no result is reported by the driver (seconds)
-LOWI_NO_RESULT_WAIT_TOLERANCE = 10
-
-# Use Fake Wifi driver. Only valid for engineering builds
-LOWI_USE_FAKE_WIFI_DRIVER = 0
-
-# Use ROME Wifi driver. Only valid for engineering builds
-# Will be removed later only for development support
-LOWI_USE_ROME_WIFI_DRIVER = 0
-
-# Use LOWI LP.
-# When enabled the Discovery Request will be routed to LOWI-LP
-LOWI_USE_LOWI_LP = 1
-
-# Log level
-# EL_LOG_OFF = 0, EL_ERROR = 1, EL_WARNING = 2, EL_INFO = 3, EL_DEBUG = 4, EL_VERBOSE = 5, EL_LOG_ALL = 100
-LOWI_LOG_LEVEL = 2
diff --git a/gps/etc/sap.conf b/gps/etc/sap.conf
deleted file mode 100644
index d5f79b5..0000000
--- a/gps/etc/sap.conf
+++ /dev/null
@@ -1,67 +0,0 @@
-################################
-# Sensor Settings
-################################
-#The following parameters are optional.
-#Internal defaults support MEMS sensors
-#native to most handset devices.
-#Device specific sensor characterization
-#for improved performance is possible as
-#described in SAP application notes.
-#GYRO_BIAS_RANDOM_WALK=
-#ACCEL_RANDOM_WALK_SPECTRAL_DENSITY=
-#ANGLE_RANDOM_WALK_SPECTRAL_DENSITY=
-#RATE_RANDOM_WALK_SPECTRAL_DENSITY=
-#VELOCITY_RANDOM_WALK_SPECTRAL_DENSITY=
-
-# Sensor Sampling Rate Parameters for Low-Data Rate Filter (should be greater than 0)
-# used in loc_eng_reinit
-SENSOR_ACCEL_BATCHES_PER_SEC=2
-SENSOR_ACCEL_SAMPLES_PER_BATCH=5
-SENSOR_GYRO_BATCHES_PER_SEC=2
-SENSOR_GYRO_SAMPLES_PER_BATCH=5
-# Sensor Sampling Rate Parameters for High-Data Rate Filter (should be greater than 0)
-SENSOR_ACCEL_BATCHES_PER_SEC_HIGH=4
-SENSOR_ACCEL_SAMPLES_PER_BATCH_HIGH=25
-SENSOR_GYRO_BATCHES_PER_SEC_HIGH=4
-SENSOR_GYRO_SAMPLES_PER_BATCH_HIGH=25
-
-# Sensor Control Mode (0=AUTO, 1=FORCE_ON)
-# used in loc_eng_reinit
-SENSOR_CONTROL_MODE=0
-
-# Enable or Disable Sensors for GPS use (0=Enable, 1=Disable)
-# used in loc_eng_reinit
-SENSOR_USAGE=0
-
-# Choose GSIFF sensor provider (1=Snapdragon Sensors Core, 2=Android NDK)
-SENSOR_PROVIDER=1
-
-# Bit mask used to define which sensor algorithms are used.
-# Setting each bit has the following definition:
-#  0x1 - DISABLE_INS_POSITIONING_FILTER
-#  0x0 - ENABLE_INS_POSITIONING_FILTER
-SENSOR_ALGORITHM_CONFIG_MASK=0x0
-
-#Vehicle Network Provider configuration
-
-#Service configuration strings
-#The number before colon in VN_X items defines version of the format of the rest of the string
-#VN_ACCEL_CFG=0:5
-#VN_GYRO_CFG=0:5.5
-#VN_ODOMETRY_CFG=0:2,4.5
-VN_ACCEL_CFG=1:128,0,12,0.0048828125,12,12,0.0048828125,24,12,0.0048828125
-VN_GYRO_CFG=1:129,0,16,0.00006103515625,16,16,0.00006103515625,32,16,0.00006103515625
-VN_ODOMETRY_CFG=1:130,0,1,5,6,32
-
-#Procesors clock ratio: AP and CAN bus microcontroller
-VN_PROC_CLOCK_RATIO=1.93165618815148
-
-# Time source used by Sensor HAL
-# Setting this value controls accuracy of location sensor services.
-#  0 - Unknown
-#  1 - CLOCK_BOOTTIME
-#  2 - CLOCK_MONOTONIC
-#  3 - CLOCK_REALTIME
-#  4 - CLOCK_BOOTTIME using Alarm timer interface
-NDK_PROVIDER_TIME_SOURCE=1
-
diff --git a/gps/etc/xtwifi.conf b/gps/etc/xtwifi.conf
deleted file mode 100644
index fc17faa..0000000
--- a/gps/etc/xtwifi.conf
+++ /dev/null
@@ -1,82 +0,0 @@
-#GTP AP Project client core config file
-#
-#GENERAL DESCRIPTION
-#This is used by client core
-#
-#Copyright (c) 2012-2014 Qualcomm Atheros, Inc.
-#All Rights Reserved.
-#Qualcomm Atheros Confidential and Proprietary.
-
-# Log verbosity control for most of the GTP WiFi system, including native and
-# Java componenets
-# OFF = 0, ERROR = 1, WARNING = 2, INFO = 3, DEBUG = 4, VERBOSE = 5, ALL = 100
-DEBUG_GLOBAL_LOG_LEVEL = 2
-
-# this is used at the server side to distinguish uploads from different maker/model
-# default "Qualcomm"
-OEM_ID_IN_REQUEST_TO_SERVER = "Qualcomm"
-
-# this is used at the server side to distinguish uploads from different maker/model
-# default "UNKNOWN"
-MODEL_ID_IN_REQUEST_TO_SERVER = "UNKNOWN"
-
-##############################################################################
-# GTP-WiFi positioning config                                                #
-##############################################################################
-
-# URL for the server position request
-XT_SERVER_ROOT_URL = https://gtpa1.izatcloud.net:443/uds/v2
-
-# size, in bytes, of the cache on device
-SIZE_BYTE_TOTAL_CACHE = 5000000
-
-# value 0: (default) use the async LOWI wifi scanner
-# value 10: FAKE AP wifi scanner
-WIFI_SCANNER_CHOICE = 0
-
-##############################################################################
-# XT-WiFi crowd sourcing config                                              #
-##############################################################################
-# Use server suggestion for crowd sourcing configuration
-ENABLE_SERVER_SUGGESTION_FOR_CROWD_SOURCING = 1
-
-# Maximum number of APs to be collected for upload
-NUM_MAX_AP_PER_UPLOAD = 16383
-# Number of minutes between upload: 24 hours
-INTERVAL_MIN_UPLOAD = 1440
-# Number of minutes between forced upload: 5 days
-INTERVAL_MIN_FORCED_UPLOAD = 7200
-
-# The minimum time between two collected AP data sets in seconds
-INTERVAL_SEC_AP_SETS_COLLECT = 10
-# Timeout for scan interval when phone is on: 600 seconds (10 minute)
-INTERVAL_SEC_SCAN = 600
-# Timeout for scan interval when phone has not continusouly on for INTERVAL_MIN_SCAN
-INTERVAL_MIN_FORCED_SCAN = 480
-
-# Maximum number of Cell DB records for upload
-WWAN_MAX_CELLDB_RECORDS_PER_UPLOAD = 1000
-
-##############################################################################
-# GTP AP cell config                                                         #
-##############################################################################
-# This item specifies the RIL server name.
-# This configure item can not be removed in Android target.
-XTRAT_WWAN_LITE_LOC_RIL_SERVER_NAME = "OS-Agent"
-
-# Maximum total number of SNA records cached in mobile storage.
-# Max allowed value is 10000
-# Min value is 100
-XTRAT_WWAN_LITE_MAX_DL_SNA = 10000
-
-# Maximum total number of BSA records cached in mobile storage.
-# Max allowed value is 65000
-# Min value is 100
-XTRAT_WWAN_LITE_MAX_DL_BSA = 65000
-
-##############################################################################
-# Qualcomm Network Location Provider config                                  #
-##############################################################################
-# Accuracy Threshold for NLP position. Position exceeds thsi threshold will be filtered out.
-# Default is 25000 meters.
-LARGE_ACCURACY_THRESHOLD_TO_FILTER_NLP_POSITION = 25000
\ No newline at end of file