Initial commit

1 files changed, 127 insertions, 0 deletions

diff --git a/gps/etc/gps.conf b/gps/etc/gps.conf
new file mode 100644
index 0000000..ea1b9ac
--- /dev/null
+++ b/gps/etc/gps.conf
@@ -0,0 +1,127 @@
+#Uncommenting these urls would only enable
+#the power up auto injection and force injection(test case).
+#XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra2.bin
+#XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra2.bin
+#XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra2.bin
+
+#ifdef VENDOR_EDIT 
+XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra3grc.bin 
+XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra3grc.bin 
+XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra3grc.bin 
+#endif
+
+#Version check for XTRA
+#DISABLE = 0
+#AUTO    = 1
+#XTRA2   = 2
+#XTRA3   = 3
+XTRA_VERSION_CHECK=0
+
+# Error Estimate
+# _SET = 1
+# _CLEAR = 0
+ERR_ESTIMATE=0
+
+#Test
+NTP_SERVER=time.gpsonextra.net
+#Asia
+# NTP_SERVER=asia.pool.ntp.org
+#Europe
+# NTP_SERVER=europe.pool.ntp.org
+#North America
+# NTP_SERVER=north-america.pool.ntp.org
+
+# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
+#               4 - Debug, 5 - Verbose
+# If DEBUG_LEVEL is commented, Android's logging levels will be used
+DEBUG_LEVEL = 2
+
+# Intermediate position report, 1=enable, 0=disable
+INTERMEDIATE_POS=0
+
+# Below bit mask configures how GPS functionalities
+# should be locked when user turns off GPS on Settings
+# Set bit 0x1 if MO GPS functionalities are to be locked
+# Set bit 0x2 if NI GPS functionalities are to be locked
+# default - non is locked for backward compatibility
+#GPS_LOCK = 0
+
+# supl version 1.0
+SUPL_VER=0x10000
+
+# Emergency SUPL, 1=enable, 0=disable
+SUPL_ES=0
+
+#Choose PDN for Emergency SUPL
+#1 - Use emergency PDN
+#0 - Use regular SUPL PDN for Emergency SUPL
+USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=1
+
+#SUPL_MODE is a bit mask set in config.xml per carrier by default.
+#If it is uncommented here, this value will overwrite the value from
+#config.xml.
+#MSA=0X2
+#MSB=0X1
+#SUPL_MODE=
+
+# GPS Capabilities bit mask
+# SCHEDULING = 0x01
+# MSB = 0x02
+# MSA = 0x04
+# ON_DEMAND_TIME = 0x10
+# GEOFENCE = 0x20
+# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE
+CAPABILITIES=0x37
+
+# Accuracy threshold for intermediate positions
+# less accurate positions are ignored, 0 for passing all positions
+# ACCURACY_THRES=5000
+
+################################
+##### AGPS server settings #####
+################################
+
+# FOR SUPL SUPPORT, set the following
+# SUPL_HOST=supl.host.com or IP
+# SUPL_PORT=1234
+
+# FOR C2K PDE SUPPORT, set the following
+# C2K_HOST=c2k.pde.com or IP
+# C2K_PORT=1234
+
+# Bitmask of slots that are available
+# for write/install to, where 1s indicate writable,
+# and the default value is 0 where no slots
+# are writable. For example, AGPS_CERT_WRITABLE_MASK
+# of b1000001010 makes 3 slots available
+# and the remaining 7 slots unwritable.
+#AGPS_CERT_WRITABLE_MASK=0
+
+####################################
+#  LTE Positioning Profile Settings
+####################################
+# 0: Enable RRLP on LTE(Default)
+# 1: Enable LPP_User_Plane on LTE
+# 2: Enable LPP_Control_Plane
+# 3: Enable both LPP_User_Plane and LPP_Control_Plane
+LPP_PROFILE = 2
+
+################################
+# EXTRA SETTINGS
+################################
+# NMEA provider (1=Modem Processor, 0=Application Processor)
+NMEA_PROVIDER=0
+# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
+SGLTE_TARGET=0
+
+##################################################
+# Select Positioning Protocol on A-GLONASS system
+##################################################
+# 0x1: RRC CPlane
+# 0x2: RRLP UPlane
+# 0x4: LLP Uplane
+#ifndef zuoyonghua@oneplus.cn enable all bit mask for GLONASS
+#A_GLONASS_POS_PROTOCOL_SELECT = 0
+#else 
+A_GLONASS_POS_PROTOCOL_SELECT = 15
+#endif