From ab09587740fddf6b4116be7b6716ab47f34d2634 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Fri, 27 Jul 2012 12:33:22 +0300 Subject: mac80211: add PS flag to bss_conf Currently, ps mode is indicated per device (rather than per interface), which doesn't make a lot of sense. Moreover, there are subtle bugs caused by the inability to indicate ps change along with other changes (e.g. when the AP deauth us, we'd like to indicate CHANGED_PS | CHANGED_ASSOC, as changing PS before notifying about disassociation will result in null-packets being sent (if IEEE80211_HW_SUPPORTS_DYNAMIC_PS) while the sta is already disconnected.) Keep the current per-device notifications, and add parallel per-vif notifications. In order to keep it simple, the per-device ps and the per-vif ps are orthogonal - the per-vif ps configuration is determined only by the user configuration (enable/disable) and the connection state, and is not affected by other vifs state and (temporary) dynamic_ps/offchannel operations (unlike per-device ps). Signed-off-by: Eliad Peller Signed-off-by: Johannes Berg --- net/mac80211/util.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'net/mac80211/util.c') diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 39b82fee4904..037d148e9f19 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1359,7 +1359,8 @@ int ieee80211_reconfig(struct ieee80211_local *local) switch (sdata->vif.type) { case NL80211_IFTYPE_STATION: changed |= BSS_CHANGED_ASSOC | - BSS_CHANGED_ARP_FILTER; + BSS_CHANGED_ARP_FILTER | + BSS_CHANGED_PS; mutex_lock(&sdata->u.mgd.mtx); ieee80211_bss_info_change_notify(sdata, changed); mutex_unlock(&sdata->u.mgd.mtx); -- cgit v1.2.3 From 679ef4eadde1f8e55074427c0d8de2da55ca81f9 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 23 Jul 2012 14:29:21 +0200 Subject: mac80211: use oper_channel in utils and config Using hw.conf.channel is wrong as it could be the temporary channel if any function like the beacon get function is called while scanning or during other temporary out-of-channel activities. Use oper_channel instead. Signed-off-by: Johannes Berg --- net/mac80211/util.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'net/mac80211/util.c') diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 037d148e9f19..39005eca1a59 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -832,7 +832,7 @@ void ieee80211_set_wmm_default(struct ieee80211_sub_if_data *sdata, memset(&qparam, 0, sizeof(qparam)); - use_11b = (local->hw.conf.channel->band == IEEE80211_BAND_2GHZ) && + use_11b = (local->oper_channel->band == IEEE80211_BAND_2GHZ) && !(sdata->flags & IEEE80211_SDATA_OPERATING_GMODE); /* @@ -919,7 +919,7 @@ void ieee80211_sta_def_wmm_params(struct ieee80211_sub_if_data *sdata, if ((supp_rates[i] & 0x7f) * 5 > 110) have_higher_than_11mbit = 1; - if (local->hw.conf.channel->band == IEEE80211_BAND_2GHZ && + if (local->oper_channel->band == IEEE80211_BAND_2GHZ && have_higher_than_11mbit) sdata->flags |= IEEE80211_SDATA_OPERATING_GMODE; else -- cgit v1.2.3 From 6b77863b719a4e32909c218c0d5a83a14f4d98c5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 23 Jul 2012 14:53:27 +0200 Subject: mac80211: fix current vs. operating channel in preq/beacon When sending probe requests, e.g. during software scanning, these will go out on the *current* channel, so their IEs need to be built from the current channel. At other times, e.g. for beacons or probe request templates, the IEs will be used on the *operating* channel and using the current channel instead might result in errors. Add the appropriate parameters to respect the difference. Signed-off-by: Johannes Berg --- net/mac80211/util.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) (limited to 'net/mac80211/util.c') diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 39005eca1a59..99e4258bdb26 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1100,6 +1100,7 @@ int ieee80211_build_preq_ies(struct ieee80211_local *local, u8 *buffer, struct sk_buff *ieee80211_build_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst, u32 ratemask, + struct ieee80211_channel *chan, const u8 *ssid, size_t ssid_len, const u8 *ie, size_t ie_len, bool directed) @@ -1109,7 +1110,7 @@ struct sk_buff *ieee80211_build_probe_req(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt; size_t buf_len; u8 *buf; - u8 chan; + u8 chan_no; /* FIXME: come up with a proper value */ buf = kmalloc(200 + ie_len, GFP_KERNEL); @@ -1122,14 +1123,12 @@ struct sk_buff *ieee80211_build_probe_req(struct ieee80211_sub_if_data *sdata, * badly-behaved APs don't respond when this parameter is included. */ if (directed) - chan = 0; + chan_no = 0; else - chan = ieee80211_frequency_to_channel( - local->hw.conf.channel->center_freq); + chan_no = ieee80211_frequency_to_channel(chan->center_freq); - buf_len = ieee80211_build_preq_ies(local, buf, ie, ie_len, - local->hw.conf.channel->band, - ratemask, chan); + buf_len = ieee80211_build_preq_ies(local, buf, ie, ie_len, chan->band, + ratemask, chan_no); skb = ieee80211_probereq_get(&local->hw, &sdata->vif, ssid, ssid_len, @@ -1158,7 +1157,9 @@ void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst, { struct sk_buff *skb; - skb = ieee80211_build_probe_req(sdata, dst, ratemask, ssid, ssid_len, + skb = ieee80211_build_probe_req(sdata, dst, ratemask, + sdata->local->hw.conf.channel, + ssid, ssid_len, ie, ie_len, directed); if (skb) { if (no_cck) @@ -1810,7 +1811,8 @@ ieee80211_ht_oper_to_channel_type(struct ieee80211_ht_operation *ht_oper) } int ieee80211_add_srates_ie(struct ieee80211_sub_if_data *sdata, - struct sk_buff *skb, bool need_basic) + struct sk_buff *skb, bool need_basic, + enum ieee80211_band band) { struct ieee80211_local *local = sdata->local; struct ieee80211_supported_band *sband; @@ -1818,7 +1820,7 @@ int ieee80211_add_srates_ie(struct ieee80211_sub_if_data *sdata, u8 i, rates, *pos; u32 basic_rates = sdata->vif.bss_conf.basic_rates; - sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; + sband = local->hw.wiphy->bands[band]; rates = sband->n_bitrates; if (rates > 8) rates = 8; @@ -1841,7 +1843,8 @@ int ieee80211_add_srates_ie(struct ieee80211_sub_if_data *sdata, } int ieee80211_add_ext_srates_ie(struct ieee80211_sub_if_data *sdata, - struct sk_buff *skb, bool need_basic) + struct sk_buff *skb, bool need_basic, + enum ieee80211_band band) { struct ieee80211_local *local = sdata->local; struct ieee80211_supported_band *sband; @@ -1849,7 +1852,7 @@ int ieee80211_add_ext_srates_ie(struct ieee80211_sub_if_data *sdata, u8 i, exrates, *pos; u32 basic_rates = sdata->vif.bss_conf.basic_rates; - sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; + sband = local->hw.wiphy->bands[band]; exrates = sband->n_bitrates; if (exrates > 8) exrates -= 8; -- cgit v1.2.3 From 5bc1420b11903e9f8c470d3b33061b8de0c5c005 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 1 Aug 2012 16:13:02 +0200 Subject: mac80211: check size of channel switch IE when parsing The channel switch IE has a fixed size, so we can discard it in parsing if it's not the right size and use the right struct pointer. Signed-off-by: Johannes Berg --- net/mac80211/util.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'net/mac80211/util.c') diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 99e4258bdb26..7dff94e43a0c 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -768,8 +768,11 @@ u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, elem_parse_failed = true; break; case WLAN_EID_CHANNEL_SWITCH: - elems->ch_switch_elem = pos; - elems->ch_switch_elem_len = elen; + if (elen != sizeof(struct ieee80211_channel_sw_ie)) { + elem_parse_failed = true; + break; + } + elems->ch_switch_ie = (void *)pos; break; case WLAN_EID_QUIET: if (!elems->quiet_elem) { -- cgit v1.2.3 From 98104fdeda63d57631c9f89e90a7b83b58fcee40 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 16 Jun 2012 00:19:54 +0200 Subject: cfg80211: add P2P Device abstraction In order to support using a different MAC address for the P2P Device address we must first have a P2P Device abstraction that can be assigned a MAC address. This abstraction will also be useful to support offloading P2P operations to the device, e.g. periodic listen for discoverability. Currently, the driver is responsible for assigning a MAC address to the P2P Device, but this could be changed by allowing a MAC address to be given to the NEW_INTERFACE command. As it has no associated netdev, a P2P Device can only be identified by its wdev identifier but the previous patches allowed using the wdev identifier in various APIs, e.g. remain-on-channel. Signed-off-by: Johannes Berg --- net/mac80211/util.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'net/mac80211/util.c') diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 7dff94e43a0c..9a4e4e30ea6c 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1390,6 +1390,8 @@ int ieee80211_reconfig(struct ieee80211_local *local) case NL80211_IFTYPE_MONITOR: /* ignore virtual */ break; + case NL80211_IFTYPE_P2P_DEVICE: + /* not yet supported */ case NL80211_IFTYPE_UNSPECIFIED: case NUM_NL80211_IFTYPES: case NL80211_IFTYPE_P2P_CLIENT: -- cgit v1.2.3 From f142c6b906da451ded2c7a8e17b2a0e6fee3e891 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 18 Jun 2012 20:07:15 +0200 Subject: mac80211: support P2P Device abstraction After cfg80211 got a P2P Device abstraction, add support to mac80211. Whether it really is supported or not will depend on whether or not the driver has support for it, but mac80211 needs to change to be able to support drivers that need a P2P Device. Signed-off-by: Johannes Berg --- net/mac80211/util.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'net/mac80211/util.c') diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 9a4e4e30ea6c..79bce870ad78 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -276,6 +276,9 @@ void ieee80211_propagate_queue_wake(struct ieee80211_local *local, int queue) list_for_each_entry_rcu(sdata, &local->interfaces, list) { int ac; + if (!sdata->dev) + continue; + if (test_bit(SDATA_STATE_OFFCHANNEL, &sdata->state)) continue; @@ -364,6 +367,9 @@ static void __ieee80211_stop_queue(struct ieee80211_hw *hw, int queue, list_for_each_entry_rcu(sdata, &local->interfaces, list) { int ac; + if (!sdata->dev) + continue; + for (ac = 0; ac < n_acs; ac++) { if (sdata->vif.hw_queue[ac] == queue || sdata->vif.cab_queue == queue) @@ -902,7 +908,8 @@ void ieee80211_set_wmm_default(struct ieee80211_sub_if_data *sdata, drv_conf_tx(local, sdata, ac, &qparam); } - if (sdata->vif.type != NL80211_IFTYPE_MONITOR) { + if (sdata->vif.type != NL80211_IFTYPE_MONITOR && + sdata->vif.type != NL80211_IFTYPE_P2P_DEVICE) { sdata->vif.bss_conf.qos = enable_qos; if (bss_notify) ieee80211_bss_info_change_notify(sdata, @@ -1391,7 +1398,8 @@ int ieee80211_reconfig(struct ieee80211_local *local) /* ignore virtual */ break; case NL80211_IFTYPE_P2P_DEVICE: - /* not yet supported */ + changed = BSS_CHANGED_IDLE; + break; case NL80211_IFTYPE_UNSPECIFIED: case NUM_NL80211_IFTYPES: case NL80211_IFTYPE_P2P_CLIENT: @@ -1578,6 +1586,8 @@ void ieee80211_recalc_smps(struct ieee80211_local *local) list_for_each_entry(sdata, &local->interfaces, list) { if (!ieee80211_sdata_running(sdata)) continue; + if (sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE) + continue; if (sdata->vif.type != NL80211_IFTYPE_STATION) goto set; -- cgit v1.2.3 From fe94fe05e9fb7c1bea482d1b0fd09029a711cce2 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 30 Jul 2012 12:26:34 +0200 Subject: mac80211: pass channel to ieee80211_send_probe_req In multi-channel scenarios, the channel that we will transmit a probe request on isn't always the current channel (which will be NULL anyway) but will instead be the channel that the AP is on. Pass the channel to the ieee80211_send_probe_req() function so it can be used in the different scenarios. The scan code continues to pass the current channel, of course. Signed-off-by: Johannes Berg --- net/mac80211/util.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'net/mac80211/util.c') diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 79bce870ad78..471fb0516c99 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1163,12 +1163,12 @@ struct sk_buff *ieee80211_build_probe_req(struct ieee80211_sub_if_data *sdata, void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst, const u8 *ssid, size_t ssid_len, const u8 *ie, size_t ie_len, - u32 ratemask, bool directed, bool no_cck) + u32 ratemask, bool directed, bool no_cck, + struct ieee80211_channel *channel) { struct sk_buff *skb; - skb = ieee80211_build_probe_req(sdata, dst, ratemask, - sdata->local->hw.conf.channel, + skb = ieee80211_build_probe_req(sdata, dst, ratemask, channel, ssid, ssid_len, ie, ie_len, directed); if (skb) { -- cgit v1.2.3