From 1c2e004183178e1947882cd2e74f37826f45230e Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Fri, 8 Jun 2012 23:31:13 +0800 Subject: Bluetooth: Add support for encryption key refresh With LE/SMP the completion of a security level elavation from medium to high is indicated by a HCI Encryption Key Refresh Complete event. The necessary behavior upon receiving this event is a mix of what's done for auth_complete and encryption_change, which is also where most of the event handling code has been copied from. Signed-off-by: Johan Hedberg Signed-off-by: Gustavo Padovan --- include/net/bluetooth/hci.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include') diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 66a7b579e31c..3def64ba77fa 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -1144,6 +1144,12 @@ struct extended_inquiry_info { __u8 data[240]; } __packed; +#define HCI_EV_KEY_REFRESH_COMPLETE 0x30 +struct hci_ev_key_refresh_complete { + __u8 status; + __le16 handle; +} __packed; + #define HCI_EV_IO_CAPA_REQUEST 0x31 struct hci_ev_io_capa_request { bdaddr_t bdaddr; -- cgit v1.2.3 From d13e14148154e5ce58467e76321eef1dd912c416 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 9 Jun 2012 10:31:09 +0200 Subject: mac80211: add some missing kernel-doc Add a few kernel-doc descriptions that were missed during development. Reported-by: Randy Dunlap Signed-off-by: Johannes Berg --- include/net/mac80211.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 1937c7d98304..95e39b6a02ec 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1940,6 +1940,11 @@ enum ieee80211_rate_control_changed { * to also unregister the device. If it returns 1, then mac80211 * will also go through the regular complete restart on resume. * + * @set_wakeup: Enable or disable wakeup when WoWLAN configuration is + * modified. The reason is that device_set_wakeup_enable() is + * supposed to be called when the configuration changes, not only + * in suspend(). + * * @add_interface: Called when a netdevice attached to the hardware is * enabled. Because it is not called for monitor mode devices, @start * and @stop must be implemented. @@ -2966,6 +2971,7 @@ __le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw, * ieee80211_generic_frame_duration - Calculate the duration field for a frame * @hw: pointer obtained from ieee80211_alloc_hw(). * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @band: the band to calculate the frame duration on * @frame_len: the length of the frame. * @rate: the rate at which the frame is going to be transmitted. * -- cgit v1.2.3 From 1761a110a9c36ad9ba26b104516677ad8cb38a08 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 7 Jun 2012 11:20:31 -0300 Subject: [media] Fix regression in ioctl numbering Yuck. The VIDIOC_(TRY_)DECODER_CMD ioctls already had ioctl numbers 96 and 97, and after merging the timings API I forgot to continue numbering from 98. So now we have two ioctls with number 96 and two with 97. With the new table-driver ioctl handling in v4l2-ioctl.c it is essential that each ioctl has its own unique number, so let's fix this quickly for 3.5. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/linux/videodev2.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 370d11106c11..2039c5d3292e 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -2640,9 +2640,9 @@ struct v4l2_create_buffers { /* Experimental, these three ioctls may change over the next couple of kernel versions. */ -#define VIDIOC_ENUM_DV_TIMINGS _IOWR('V', 96, struct v4l2_enum_dv_timings) -#define VIDIOC_QUERY_DV_TIMINGS _IOR('V', 97, struct v4l2_dv_timings) -#define VIDIOC_DV_TIMINGS_CAP _IOWR('V', 98, struct v4l2_dv_timings_cap) +#define VIDIOC_ENUM_DV_TIMINGS _IOWR('V', 98, struct v4l2_enum_dv_timings) +#define VIDIOC_QUERY_DV_TIMINGS _IOR('V', 99, struct v4l2_dv_timings) +#define VIDIOC_DV_TIMINGS_CAP _IOWR('V', 100, struct v4l2_dv_timings_cap) /* Reminder: when adding new ioctls please add support for them to drivers/media/video/v4l2-compat-ioctl32.c as well! */ -- cgit v1.2.3 From 5daf53a6eb5c54c618c9def388d81c2769fd11a0 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 19 May 2012 07:57:03 -0300 Subject: [media] snd_tea575x: Make the module using snd_tea575x the fops owner Before this patch the owner field of the /dev/radio# device fops was set to the snd-tea575x-tuner module itself. Meaning that the module which was using it could be rmmod-ed while the device is open, and then BAD things happen. I know, as I found out the hard way :) Note that there is no need to also somehow increase the refcount of the snd-tea575x-tuner module itself, since any drivers using it will have symbolic references to it. Signed-off-by: Hans de Goede CC: Ondrej Zary Signed-off-by: Mauro Carvalho Chehab --- include/sound/tea575x-tuner.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/sound/tea575x-tuner.h b/include/sound/tea575x-tuner.h index ec3f910aa40b..0c3c2fb0f939 100644 --- a/include/sound/tea575x-tuner.h +++ b/include/sound/tea575x-tuner.h @@ -44,6 +44,7 @@ struct snd_tea575x_ops { struct snd_tea575x { struct v4l2_device *v4l2_dev; + struct v4l2_file_operations fops; struct video_device vd; /* video device */ int radio_nr; /* radio_nr */ bool tea5759; /* 5759 chip is present */ @@ -62,7 +63,7 @@ struct snd_tea575x { int (*ext_init)(struct snd_tea575x *tea); }; -int snd_tea575x_init(struct snd_tea575x *tea); +int snd_tea575x_init(struct snd_tea575x *tea, struct module *owner); void snd_tea575x_exit(struct snd_tea575x *tea); #endif /* __SOUND_TEA575X_TUNER_H */ -- cgit v1.2.3 From 62b1a8ab9b3660bb820d8dfe23148ed6cda38574 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 14 Jun 2012 06:42:44 +0000 Subject: net: remove skb_orphan_try() Orphaning skb in dev_hard_start_xmit() makes bonding behavior unfriendly for applications sending big UDP bursts : Once packets pass the bonding device and come to real device, they might hit a full qdisc and be dropped. Without orphaning, the sender is automatically throttled because sk->sk_wmemalloc reaches sk->sk_sndbuf (assuming sk_sndbuf is not too big) We could try to defer the orphaning adding another test in dev_hard_start_xmit(), but all this seems of little gain, now that BQL tends to make packets more likely to be parked in Qdisc queues instead of NIC TX ring, in cases where performance matters. Reverts commits : fc6055a5ba31 net: Introduce skb_orphan_try() 87fd308cfc6b net: skb_tx_hash() fix relative to skb_orphan_try() and removes SKBTX_DRV_NEEDS_SK_REF flag Reported-and-bisected-by: Jean-Michel Hautbois Signed-off-by: Eric Dumazet Tested-by: Oliver Hartkopp Acked-by: Oliver Hartkopp Signed-off-by: David S. Miller --- include/linux/skbuff.h | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index b534a1be540a..642cb7355df3 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -225,14 +225,11 @@ enum { /* device driver is going to provide hardware time stamp */ SKBTX_IN_PROGRESS = 1 << 2, - /* ensure the originating sk reference is available on driver level */ - SKBTX_DRV_NEEDS_SK_REF = 1 << 3, - /* device driver supports TX zero-copy buffers */ - SKBTX_DEV_ZEROCOPY = 1 << 4, + SKBTX_DEV_ZEROCOPY = 1 << 3, /* generate wifi status information (where possible) */ - SKBTX_WIFI_STATUS = 1 << 5, + SKBTX_WIFI_STATUS = 1 << 4, }; /* -- cgit v1.2.3 From 2a0c451ade8e1783c5d453948289e4a978d417c9 Mon Sep 17 00:00:00 2001 From: Thomas Graf Date: Thu, 14 Jun 2012 23:00:17 +0000 Subject: ipv6: Prevent access to uninitialized fib_table_hash via /proc/net/ipv6_route /proc/net/ipv6_route reflects the contents of fib_table_hash. The proc handler is installed in ip6_route_net_init() whereas fib_table_hash is allocated in fib6_net_init() _after_ the proc handler has been installed. This opens up a short time frame to access fib_table_hash with its pants down. fib6_init() as a whole can't be moved to an earlier position as it also registers the rtnetlink message handlers which should be registered at the end. Therefore split it into fib6_init() which is run early and fib6_init_late() to register the rtnetlink message handlers. Signed-off-by: Thomas Graf Reviewed-by: Neil Horman Signed-off-by: David S. Miller --- include/net/ip6_fib.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h index 0ae759a6c76e..209af13b0336 100644 --- a/include/net/ip6_fib.h +++ b/include/net/ip6_fib.h @@ -271,6 +271,8 @@ extern void fib6_run_gc(unsigned long expires, extern void fib6_gc_cleanup(void); extern int fib6_init(void); +extern int fib6_init_late(void); +extern void fib6_cleanup_late(void); #ifdef CONFIG_IPV6_MULTIPLE_TABLES extern int fib6_rules_init(void); -- cgit v1.2.3 From e8803b6c387129059e04d9e14d49efda250a7361 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 16 Jun 2012 01:12:19 -0700 Subject: Revert "ipv6: Prevent access to uninitialized fib_table_hash via /proc/net/ipv6_route" This reverts commit 2a0c451ade8e1783c5d453948289e4a978d417c9. It causes crashes, because now ip6_null_entry is used before it is initialized. Signed-off-by: David S. Miller --- include/net/ip6_fib.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h index 209af13b0336..0ae759a6c76e 100644 --- a/include/net/ip6_fib.h +++ b/include/net/ip6_fib.h @@ -271,8 +271,6 @@ extern void fib6_run_gc(unsigned long expires, extern void fib6_gc_cleanup(void); extern int fib6_init(void); -extern int fib6_init_late(void); -extern void fib6_cleanup_late(void); #ifdef CONFIG_IPV6_MULTIPLE_TABLES extern int fib6_rules_init(void); -- cgit v1.2.3 From 31fdc5553b42abd7e29bb7b89f6ba07514eb4763 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?R=C3=A9mi=20Denis-Courmont?= Date: Wed, 13 Jun 2012 22:29:03 +0000 Subject: net: remove my future former mail address MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rémi Denis-Courmont Cc: Sakari Ailus Signed-off-by: David S. Miller --- include/net/phonet/gprs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/phonet/gprs.h b/include/net/phonet/gprs.h index 928daf595beb..bcd525e39a0b 100644 --- a/include/net/phonet/gprs.h +++ b/include/net/phonet/gprs.h @@ -5,7 +5,7 @@ * * Copyright (C) 2008 Nokia Corporation. * - * Author: Rémi Denis-Courmont + * Author: Rémi Denis-Courmont * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License -- cgit v1.2.3 From 6a0bdffa0073857870a4ed1b4489762146359eb4 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 20 Jun 2012 16:04:19 -0400 Subject: SCSI & usb-storage: add try_rc_10_first flag Several bug reports have been received recently for USB mass-storage devices that don't handle READ CAPACITY(16) commands properly. They report bogus sizes, in some cases becoming unusable as a result. The bugs were triggered by commit 09b6b51b0b6c1b9bb61815baf205e4d74c89ff04 (SCSI & usb-storage: add flags for VPD pages and REPORT LUNS), which caused usb-storage to stop overriding the SCSI level reported by devices. By default, the sd driver will try READ CAPACITY(16) first for any device whose level is above SCSI_SPC_2. It seems likely that any device large enough to require the use of READ CAPACITY(16) (i.e., 2 TB or more) would be able to handle READ CAPACITY(10) commands properly. Indeed, I don't know of any devices that don't handle READ CAPACITY(10) properly. Therefore this patch (as1559) adds a new flag telling the sd driver to try READ CAPACITY(10) before READ CAPACITY(16), and sets this flag for every USB mass-storage device. If a device really is larger than 2 TB, sd will fall back to READ CAPACITY(16) just as it used to. This fixes Bugzilla #43391. Signed-off-by: Alan Stern Acked-by: Hans de Goede CC: "James E.J. Bottomley" CC: Matthew Dharm Cc: stable Signed-off-by: Greg Kroah-Hartman --- include/scsi/scsi_device.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index 6efb2e1416e0..ba9698852321 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -151,6 +151,7 @@ struct scsi_device { SD_LAST_BUGGY_SECTORS */ unsigned no_read_disc_info:1; /* Avoid READ_DISC_INFO cmds */ unsigned no_read_capacity_16:1; /* Avoid READ_CAPACITY_16 cmds */ + unsigned try_rc_10_first:1; /* Try READ_CAPACACITY_10 first */ unsigned is_visible:1; /* is the device visible in sysfs */ DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */ -- cgit v1.2.3 From 09682c1dd3820445a27d32dcbeee6a6eafff3dc9 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 25 Jun 2012 17:15:31 +0900 Subject: bug.h: Fix up CONFIG_BUG=n implicit function declarations. Commit 2603efa31a03 ("bug.h: Fix up powerpc build regression") corrected the powerpc build case and extended the __ASSEMBLY__ guards, but it also got caught in pre-processor hell accidentally matching the else case of CONFIG_BUG resulting in the BUG disabled case tripping up on -Werror=implicit-function-declaration. It's not possible to __ASSEMBLY__ guard the entire file as architecture code needs to get at the BUGFLAG_WARNING definition in the GENERIC_BUG case, but the rest of the CONFIG_BUG=y/n case needs to be guarded. Rather than littering endless __ASSEMBLY__ checks in each of the if/else cases we just move the BUGFLAG definitions up under their own GENERIC_BUG test and then shove everything else under one big __ASSEMBLY__ guard. Build tested on all of x86 CONFIG_BUG=y, CONFIG_BUG=n, powerpc (due to it's dependence on BUGFLAG definitions in assembly code), and sh (due to not bringing in linux/kernel.h to satisfy the taint flag definitions used by the generic bug code). Hopefully that's the end of the corner cases and I can abstain from ever having to touch this infernal header ever again. Reported-by: Fengguang Wu Tested-by: Fengguang Wu Acked-by: Randy Dunlap Cc: Arnd Bergmann Signed-off-by: Paul Mundt Signed-off-by: Linus Torvalds --- include/asm-generic/bug.h | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) (limited to 'include') diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h index 506ec19a3736..7d10f962aa13 100644 --- a/include/asm-generic/bug.h +++ b/include/asm-generic/bug.h @@ -3,10 +3,18 @@ #include +#ifdef CONFIG_GENERIC_BUG +#define BUGFLAG_WARNING (1 << 0) +#define BUGFLAG_TAINT(taint) (BUGFLAG_WARNING | ((taint) << 8)) +#define BUG_GET_TAINT(bug) ((bug)->flags >> 8) +#endif + +#ifndef __ASSEMBLY__ +#include + #ifdef CONFIG_BUG #ifdef CONFIG_GENERIC_BUG -#ifndef __ASSEMBLY__ struct bug_entry { #ifndef CONFIG_GENERIC_BUG_RELATIVE_POINTERS unsigned long bug_addr; @@ -23,17 +31,8 @@ struct bug_entry { #endif unsigned short flags; }; -#endif /* __ASSEMBLY__ */ - -#define BUGFLAG_WARNING (1 << 0) -#define BUGFLAG_TAINT(taint) (BUGFLAG_WARNING | ((taint) << 8)) -#define BUG_GET_TAINT(bug) ((bug)->flags >> 8) - #endif /* CONFIG_GENERIC_BUG */ -#ifndef __ASSEMBLY__ -#include - /* * Don't use BUG() or BUG_ON() unless there's really no way out; one * example might be detecting data structure corruption in the middle -- cgit v1.2.3 From 87fac288083db40b5d5ab845393be268357c8827 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 30 Jun 2012 15:30:46 -0700 Subject: linux/irq.h: fix kernel-doc warning Fix kernel-doc warning. This struct member was removed in commit 875682648b89 ("irq: Remove irq_chip->release()") so remove its associated kernel-doc entry also. Warning(include/linux/irq.h:338): Excess struct/union/enum/typedef member 'release' description in 'irq_chip' Signed-off-by: Randy Dunlap Cc: Richard Weinberger Cc: Thomas Gleixner Signed-off-by: Linus Torvalds --- include/linux/irq.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/linux/irq.h b/include/linux/irq.h index 61f5cec031e0..a5261e3d2e3c 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -301,8 +301,6 @@ static inline irq_hw_number_t irqd_to_hwirq(struct irq_data *d) * @irq_pm_shutdown: function called from core code on shutdown once per chip * @irq_print_chip: optional to print special chip info in show_interrupts * @flags: chip specific flags - * - * @release: release function solely used by UML */ struct irq_chip { const char *name; -- cgit v1.2.3