From a70ea994a0d83fd0151a070be72b87d014ef0a7e Mon Sep 17 00:00:00 2001 From: Alexey Kuznetsov Date: Thu, 9 Feb 2006 16:40:11 -0800 Subject: [NETLINK]: Fix a severe bug netlink overrun was broken while improvement of netlink. Destination socket is used in the place where it was meant to be source socket, so that now overrun is never sent to user netlink sockets, when it should be, and it even can be set on kernel socket, which results in complete deadlock of rtnetlink. Suggested fix is to restore status quo passing source socket as additional argument to netlink_attachskb(). A little explanation: overrun is set on a socket, when it failed to receive some message and sender of this messages does not or even have no way to handle this error. This happens in two cases: 1. when kernel sends something. Kernel never retransmits and cannot wait for buffer space. 2. when user sends a broadcast and the message was not delivered to some recipients. Signed-off-by: Alexey Kuznetsov Signed-off-by: David S. Miller --- include/linux/netlink.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/netlink.h b/include/linux/netlink.h index 6a2ccf78a356..c256ebe2a7b4 100644 --- a/include/linux/netlink.h +++ b/include/linux/netlink.h @@ -160,7 +160,8 @@ extern int netlink_unregister_notifier(struct notifier_block *nb); /* finegrained unicast helpers: */ struct sock *netlink_getsockbyfilp(struct file *filp); -int netlink_attachskb(struct sock *sk, struct sk_buff *skb, int nonblock, long timeo); +int netlink_attachskb(struct sock *sk, struct sk_buff *skb, int nonblock, + long timeo, struct sock *ssk); void netlink_detachskb(struct sock *sk, struct sk_buff *skb); int netlink_sendskb(struct sock *sk, struct sk_buff *skb, int protocol); -- cgit v1.2.3 From d93077fb0e7cb9d4f4094a649501d840c55fdc8b Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Thu, 9 Feb 2006 16:58:46 -0800 Subject: [IRDA]: Set proper IrLAP device address length This patch set IrDA's addr_len properly, i.e to 4 bytes, the size of the IrLAP device address. Signed-off-by: Samuel Ortiz Signed-off-by: David S. Miller --- include/net/irda/irlap.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/net/irda/irlap.h b/include/net/irda/irlap.h index f55e86e75030..2127cae1e0a6 100644 --- a/include/net/irda/irlap.h +++ b/include/net/irda/irlap.h @@ -50,6 +50,9 @@ /* May be different when we get VFIR */ #define LAP_MAX_HEADER (LAP_ADDR_HEADER + LAP_CTRL_HEADER) +/* Each IrDA device gets a random 32 bits IRLAP device address */ +#define LAP_ALEN 4 + #define BROADCAST 0xffffffff /* Broadcast device address */ #define CBROADCAST 0xfe /* Connection broadcast address */ #define XID_FORMAT 0x01 /* Discovery XID format */ -- cgit v1.2.3 From b37ce281d729181b9862c4e3e112f9b5eea74ac9 Mon Sep 17 00:00:00 2001 From: JANAK DESAI Date: Tue, 7 Feb 2006 12:59:11 -0800 Subject: [PATCH] powerpc: unshare system call registration Registers system call for the powerpc architecture. Signed-off-by: Janak Desai Cc: Al Viro Cc: Christoph Hellwig Cc: Michael Kerrisk Cc: Benjamin Herrenschmidt Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Paul Mackerras --- include/asm-powerpc/unistd.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/asm-powerpc/unistd.h b/include/asm-powerpc/unistd.h index a40cdff21a88..35556993f066 100644 --- a/include/asm-powerpc/unistd.h +++ b/include/asm-powerpc/unistd.h @@ -300,8 +300,9 @@ #define __NR_spu_create 279 #define __NR_pselect6 280 #define __NR_ppoll 281 +#define __NR_unshare 282 -#define __NR_syscalls 282 +#define __NR_syscalls 283 #ifdef __KERNEL__ #define __NR__exit __NR_exit -- cgit v1.2.3 From 9c15e852a524d55ab768cf48c97f5c684f876af2 Mon Sep 17 00:00:00 2001 From: Haren Myneni Date: Fri, 10 Feb 2006 01:51:05 -0800 Subject: [PATCH] kexec: fix in free initrd when overlapped with crashkernel region It is possible that the reserved crashkernel region can be overlapped with initrd since the bootloader sets the initrd location. When the initrd region is freed, the second kernel memory will not be contiguous. The Kexec_load can cause an oops since there is no contiguous memory to write the second kernel or this memory could be used in the first kernel itself and may not be part of the dump. For example, on powerpc, the initrd is located at 36MB and the crashkernel starts at 32MB. The kexec_load caused panic since writing into non-allocated memory (after 36MB). We could see the similar issue even on other archs. One possibility is to move the initrd outside of crashkernel region. But, the initrd region will be freed anyway before the system is up. This patch fixes this issue and frees only regions that are not part of crashkernel memory in case overlaps. Signed-off-by: Haren Myneni Acked-by: "Eric W. Biederman" Cc: Vivek Goyal Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kexec.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/kexec.h b/include/linux/kexec.h index a311f58c8a7c..cfb3410e32b1 100644 --- a/include/linux/kexec.h +++ b/include/linux/kexec.h @@ -6,6 +6,7 @@ #include #include #include +#include #include /* Verify architecture specific macros are defined */ -- cgit v1.2.3 From 7a8ef1cb774e5438d292365626f9b96616283706 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 10 Feb 2006 01:51:08 -0800 Subject: [PATCH] x86: don't initialise cpu_possible_map to all ones Initialising cpu_possible_map to all-ones with CONFIG_HOTPLUG_CPU means that a) All for_each_cpu() loops will iterate across all NR_CPUS CPUs, rather than over possible ones. That can be quite expensive. b) Soon we'll be allocating per-cpu areas only for possible CPUs. So with CPU_MASK_ALL, we'll be wasting memory. I also switched voyager over to not use CPU_MASK_ALL in the non-CPU-hotplug case. Should be OK.. I note that parisc is also using CPU_MASK_ALL. Suggest that it stop doing that. Cc: James Bottomley Cc: Kyle McMartin Cc: Paul Jackson Cc: Ashok Raj Cc: Zwane Mwaikambo Cc: Paul Jackson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/cpumask.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h index 20b446f26ecd..60e56c6e03dd 100644 --- a/include/linux/cpumask.h +++ b/include/linux/cpumask.h @@ -328,7 +328,7 @@ static inline void __cpus_remap(cpumask_t *dstp, const cpumask_t *srcp, * bitmap of size NR_CPUS. * * #ifdef CONFIG_HOTPLUG_CPU - * cpu_possible_map - all NR_CPUS bits set + * cpu_possible_map - has bit 'cpu' set iff cpu is populatable * cpu_present_map - has bit 'cpu' set iff cpu is populated * cpu_online_map - has bit 'cpu' set iff cpu available to scheduler * #else -- cgit v1.2.3 From 8977d929e49021d9a6e031310aab01fa72f849c2 Mon Sep 17 00:00:00 2001 From: Paul Fulghum Date: Fri, 10 Feb 2006 01:51:14 -0800 Subject: [PATCH] tty buffering stall fix Prevent stalled processing of received data when a driver allocates tty buffer space but does not immediately follow the allocation with more data and a call to schedule receive tty processing. (example: hvc_console) This bug was introduced by the first locking patch for the new tty buffering. Signed-off-by: Paul Fulghum Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kbd_kern.h | 4 +++- include/linux/tty.h | 2 ++ include/linux/tty_flip.h | 4 +++- 3 files changed, 8 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/kbd_kern.h b/include/linux/kbd_kern.h index 3aed37314ab8..e87c32a5c86a 100644 --- a/include/linux/kbd_kern.h +++ b/include/linux/kbd_kern.h @@ -153,8 +153,10 @@ static inline void con_schedule_flip(struct tty_struct *t) { unsigned long flags; spin_lock_irqsave(&t->buf.lock, flags); - if (t->buf.tail != NULL) + if (t->buf.tail != NULL) { t->buf.tail->active = 0; + t->buf.tail->commit = t->buf.tail->used; + } spin_unlock_irqrestore(&t->buf.lock, flags); schedule_work(&t->buf.work); } diff --git a/include/linux/tty.h b/include/linux/tty.h index a7bd3b4558d2..f45cd74e6f24 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -58,6 +58,8 @@ struct tty_buffer { int used; int size; int active; + int commit; + int read; /* Data points here */ unsigned long data[0]; }; diff --git a/include/linux/tty_flip.h b/include/linux/tty_flip.h index 82961eb19888..222faf97d5f9 100644 --- a/include/linux/tty_flip.h +++ b/include/linux/tty_flip.h @@ -29,8 +29,10 @@ _INLINE_ void tty_schedule_flip(struct tty_struct *tty) { unsigned long flags; spin_lock_irqsave(&tty->buf.lock, flags); - if (tty->buf.tail != NULL) + if (tty->buf.tail != NULL) { tty->buf.tail->active = 0; + tty->buf.tail->commit = tty->buf.tail->used; + } spin_unlock_irqrestore(&tty->buf.lock, flags); schedule_delayed_work(&tty->buf.work, 1); } -- cgit v1.2.3 From e19816808346cc1619733532a267a11dce8f8a12 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 10 Feb 2006 22:40:51 +0000 Subject: [ARM] 3326/1: H1940 - Control latches Patch from Ben Dooks Define the bits for the two board control latches that control various items on the H1940 iPAQ. Signed-off-by: Ben Dooks Signed-off-by: Arnaud Patard Signed-off-by: Russell King --- include/asm-arm/arch-s3c2410/h1940-latch.h | 64 ++++++++++++++++++++++++++++++ 1 file changed, 64 insertions(+) create mode 100644 include/asm-arm/arch-s3c2410/h1940-latch.h (limited to 'include') diff --git a/include/asm-arm/arch-s3c2410/h1940-latch.h b/include/asm-arm/arch-s3c2410/h1940-latch.h new file mode 100644 index 000000000000..c5802411f43d --- /dev/null +++ b/include/asm-arm/arch-s3c2410/h1940-latch.h @@ -0,0 +1,64 @@ +/* linux/include/asm-arm/arch-s3c2410/h1940-latch.h + * + * (c) 2005 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * iPAQ H1940 series - latch definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_H1940_LATCH_H +#define __ASM_ARCH_H1940_LATCH_H + + +#ifndef __ASSEMBLY__ +#define H1940_LATCH ((void __iomem *)0xF8000000) +#else +#define H1940_LATCH 0xF8000000 +#endif + +#define H1940_PA_LATCH (S3C2410_CS2) + +/* SD layer latch */ + +#define H1940_LATCH_SDQ1 (1<<16) +#define H1940_LATCH_LCD_P1 (1<<17) +#define H1940_LATCH_LCD_P2 (1<<18) +#define H1940_LATCH_LCD_P3 (1<<19) +#define H1940_LATCH_MAX1698_nSHUTDOWN (1<<20) /* LCD backlight */ +#define H1940_LATCH_LED_RED (1<<21) +#define H1940_LATCH_SDQ7 (1<<22) +#define H1940_LATCH_USB_DP (1<<23) + +/* CPU layer latch */ + +#define H1940_LATCH_UDA_POWER (1<<24) +#define H1940_LATCH_AUDIO_POWER (1<<25) +#define H1940_LATCH_SM803_ENABLE (1<<26) +#define H1940_LATCH_LCD_P4 (1<<27) +#define H1940_LATCH_CPUQ5 (1<<28) /* untraced */ +#define H1940_LATCH_BLUETOOTH_POWER (1<<29) /* active high */ +#define H1940_LATCH_LED_GREEN (1<<30) +#define H1940_LATCH_LED_FLASH (1<<31) + +/* default settings */ + +#define H1940_LATCH_DEFAULT \ + H1940_LATCH_LCD_P4 | \ + H1940_LATCH_SM803_ENABLE | \ + H1940_LATCH_SDQ1 | \ + H1940_LATCH_LCD_P1 | \ + H1940_LATCH_LCD_P2 | \ + H1940_LATCH_LCD_P3 | \ + H1940_LATCH_MAX1698_nSHUTDOWN | \ + H1940_LATCH_CPUQ5 + +/* control functions */ + +extern void h1940_latch_control(unsigned int clear, unsigned int set); + +#endif /* __ASM_ARCH_H1940_LATCH_H */ -- cgit v1.2.3