From 446411e18b2cb17d153e45f634a3c9a79ada3ac2 Mon Sep 17 00:00:00 2001 From: Andreas Larsson Date: Wed, 13 Feb 2013 14:20:25 +0100 Subject: spi: Initialize cs_gpio and cs_gpios with -ENOENT The return value from of_get_named_gpio is -ENOENT when the given index matches a hole in the "cs-gpios" property phandle list. However, the default value of cs_gpio in struct spi_device and entries of cs_gpios in struct spi_master is -EINVAL, which is documented to indicate that a GPIO line should not be used for the given spi_device. This sets the default value of cs_gpio in struct spi_device and entries of cs_gpios in struct spi_master to -ENOENT. Thus, -ENOENT is the only value used to indicate that no GPIO line should be used. Signed-off-by: Andreas Larsson Signed-off-by: Grant Likely --- include/linux/spi/spi.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 38c2b925923d..c395f32b53b3 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -57,7 +57,7 @@ extern struct bus_type spi_bus_type; * @modalias: Name of the driver to use with this device, or an alias * for that name. This appears in the sysfs "modalias" attribute * for driver coldplugging, and in uevents used for hotplugging - * @cs_gpio: gpio number of the chipselect line (optional, -EINVAL when + * @cs_gpio: gpio number of the chipselect line (optional, -ENOENT when * when not using a GPIO line) * * A @spi_device is used to interchange data between an SPI slave @@ -261,7 +261,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * queue so the subsystem notifies the driver that it may relax the * hardware by issuing this call * @cs_gpios: Array of GPIOs to use as chip select lines; one per CS - * number. Any individual value may be -EINVAL for CS lines that + * number. Any individual value may be -ENOENT for CS lines that * are not GPIOs (driven by the SPI controller itself). * * Each SPI master controller can communicate with one or more @spi_device -- cgit v1.2.3 From d450f445f9a654080a6be4094376c2192d9a1f36 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 19 Feb 2013 02:58:25 +0300 Subject: : fix compilation warnings with DT disabled MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the following compilation warnings (in Simon Horman's renesas.git repo): In file included from arch/arm/mach-shmobile/setup-r8a7779.c:24:0: include/linux/of_platform.h:107:13: warning: ‘struct of_device_id’ declared inside parameter list [enabled by default] include/linux/of_platform.h:107:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] include/linux/of_platform.h:107:13: warning: ‘struct device_node’ declared inside parameter list [enabled by default] only #include's headers with definitions of the above mentioned structures if CONFIG_OF_DEVICE=y but uses them even if not. One solution is to move some #include's out of #ifdef CONFIG_OF_DEVICE and use incomplete declarations for the rest of the structures where the #ifdef move doesn't help... Reported-by: Vladimir Barinov Signed-off-by: Sergei Shtylyov Signed-off-by: Rob Herring --- include/linux/of_platform.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/of_platform.h b/include/linux/of_platform.h index 3863a4dbdf18..2a93b64a3869 100644 --- a/include/linux/of_platform.h +++ b/include/linux/of_platform.h @@ -11,9 +11,10 @@ * */ -#ifdef CONFIG_OF_DEVICE #include #include + +#ifdef CONFIG_OF_DEVICE #include #include #include @@ -100,7 +101,7 @@ extern int of_platform_populate(struct device_node *root, #if !defined(CONFIG_OF_ADDRESS) struct of_dev_auxdata; -struct device; +struct device_node; static inline int of_platform_populate(struct device_node *root, const struct of_device_id *matches, const struct of_dev_auxdata *lookup, -- cgit v1.2.3 From e30b5dca15dea86aa697f9d58ff646294fe80d3d Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Fri, 3 May 2013 02:15:52 -0400 Subject: ext4: fix fio regression We (Linux Kernel Performance project) found a regression introduced by commit: f7fec032aa ext4: track all extent status in extent status tree The commit causes about 20% performance decrease in fio random write test. Profiler shows that rb_next() uses a lot of CPU time. The call stack is: rb_next ext4_es_find_delayed_extent ext4_map_blocks _ext4_get_block ext4_get_block_write __blockdev_direct_IO ext4_direct_IO generic_file_direct_write __generic_file_aio_write ext4_file_write aio_rw_vect_retry aio_run_iocb do_io_submit sys_io_submit system_call_fastpath io_submit td_io_getevents io_u_queued_complete thread_main main __libc_start_main The cause is that ext4_es_find_delayed_extent() doesn't have an upper bound, it keeps searching until a delayed extent is found. When there are a lots of non-delayed entries in the extent state tree, ext4_es_find_delayed_extent() may uses a lot of CPU time. Reported-by: LKP project Signed-off-by: Yan, Zheng Signed-off-by: Zheng Liu Cc: "Theodore Ts'o" --- include/trace/events/ext4.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/trace/events/ext4.h b/include/trace/events/ext4.h index d0e686402df8..8ee15b97cd38 100644 --- a/include/trace/events/ext4.h +++ b/include/trace/events/ext4.h @@ -2139,7 +2139,7 @@ TRACE_EVENT(ext4_es_remove_extent, __entry->lblk, __entry->len) ); -TRACE_EVENT(ext4_es_find_delayed_extent_enter, +TRACE_EVENT(ext4_es_find_delayed_extent_range_enter, TP_PROTO(struct inode *inode, ext4_lblk_t lblk), TP_ARGS(inode, lblk), @@ -2161,7 +2161,7 @@ TRACE_EVENT(ext4_es_find_delayed_extent_enter, (unsigned long) __entry->ino, __entry->lblk) ); -TRACE_EVENT(ext4_es_find_delayed_extent_exit, +TRACE_EVENT(ext4_es_find_delayed_extent_range_exit, TP_PROTO(struct inode *inode, struct extent_status *es), TP_ARGS(inode, es), -- cgit v1.2.3 From 2acd09f3232825a0e95134703ec59bc327ef9967 Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Thu, 25 Apr 2013 15:04:02 -0700 Subject: target: Remove unused struct members in se_dev_entry Some were incremented, but never used anywhere from what I could tell. Signed-off-by: Andy Grover Signed-off-by: Nicholas Bellinger --- include/target/target_core_base.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include') diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index c4af592f7057..136b7b2f7b32 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -572,12 +572,8 @@ struct se_dev_entry { bool def_pr_registered; /* See transport_lunflags_table */ u32 lun_flags; - u32 deve_cmds; u32 mapped_lun; - u32 average_bytes; - u32 last_byte_count; u32 total_cmds; - u32 total_bytes; u64 pr_res_key; u64 creation_time; u32 attach_count; -- cgit v1.2.3 From 54afc1214133deddd49162b101971af5711f1b3a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Wed, 8 May 2013 16:38:33 +0300 Subject: drm: Add kernel-doc for drm_fb_helper_funcs->initial_config MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Ville Syrjälä Signed-off-by: Dave Airlie --- include/drm/drm_fb_helper.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h index 8230b46fdd73..61ebd51f6112 100644 --- a/include/drm/drm_fb_helper.h +++ b/include/drm/drm_fb_helper.h @@ -57,6 +57,7 @@ struct drm_fb_helper_surface_size { * @fb_probe: - Driver callback to allocate and initialize the fbdev info * structure. Futhermore it also needs to allocate the drm * framebuffer used to back the fbdev. + * @initial_config: - Setup an initial fbdev display configuration * * Driver callbacks used by the fbdev emulation helper library. */ -- cgit v1.2.3 From 7b97936f298af7991ca4717a4c23610d9ecd8927 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Wed, 8 May 2013 16:38:34 +0300 Subject: drm: Remove pointless '-' characters from drm_fb_helper documentation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Ville Syrjälä Signed-off-by: Dave Airlie --- include/drm/drm_fb_helper.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'include') diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h index 61ebd51f6112..471f276ce8f7 100644 --- a/include/drm/drm_fb_helper.h +++ b/include/drm/drm_fb_helper.h @@ -50,14 +50,14 @@ struct drm_fb_helper_surface_size { /** * struct drm_fb_helper_funcs - driver callbacks for the fbdev emulation library - * @gamma_set: - Set the given gamma lut register on the given crtc. - * @gamma_get: - Read the given gamma lut register on the given crtc, used to - * save the current lut when force-restoring the fbdev for e.g. - * kdbg. - * @fb_probe: - Driver callback to allocate and initialize the fbdev info - * structure. Futhermore it also needs to allocate the drm - * framebuffer used to back the fbdev. - * @initial_config: - Setup an initial fbdev display configuration + * @gamma_set: Set the given gamma lut register on the given crtc. + * @gamma_get: Read the given gamma lut register on the given crtc, used to + * save the current lut when force-restoring the fbdev for e.g. + * kdbg. + * @fb_probe: Driver callback to allocate and initialize the fbdev info + * structure. Futhermore it also needs to allocate the drm + * framebuffer used to back the fbdev. + * @initial_config: Setup an initial fbdev display configuration * * Driver callbacks used by the fbdev emulation helper library. */ -- cgit v1.2.3 From b9434d0f162c351e02e0e8f66ca6b75a67595537 Mon Sep 17 00:00:00 2001 From: Chris Cummins Date: Thu, 9 May 2013 14:20:40 +0100 Subject: drm: Use names of ioctls in debug traces MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The intention here is to make the output of dmesg with full verbosity a bit easier for a human to parse. This commit transforms: [drm:drm_ioctl], pid=699, cmd=0x6458, nr=0x58, dev 0xe200, auth=1 [drm:drm_ioctl], pid=699, cmd=0xc010645b, nr=0x5b, dev 0xe200, auth=1 [drm:drm_ioctl], pid=699, cmd=0xc0106461, nr=0x61, dev 0xe200, auth=1 [drm:drm_ioctl], pid=699, cmd=0xc01c64ae, nr=0xae, dev 0xe200, auth=1 [drm:drm_mode_addfb], [FB:32] [drm:drm_ioctl], pid=699, cmd=0xc0106464, nr=0x64, dev 0xe200, auth=1 [drm:drm_vm_open_locked], 0x7fd9302fe000,0x00a00000 [drm:drm_ioctl], pid=699, cmd=0x400c645f, nr=0x5f, dev 0xe200, auth=1 [drm:drm_ioctl], pid=699, cmd=0xc00464af, nr=0xaf, dev 0xe200, auth=1 [drm:intel_crtc_set_config], [CRTC:3] [NOFB] into: [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, I915_GEM_THROTTLE [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, I915_GEM_CREATE [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, I915_GEM_SET_TILING [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, IOCTL_MODE_ADDFB [drm:drm_mode_addfb], [FB:32] [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, I915_GEM_MMAP_GTT [drm:drm_vm_open_locked], 0x7fd9302fe000,0x00a00000 [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, I915_GEM_SET_DOMAIN [drm:drm_ioctl], pid=699, dev=0xe200, auth=1, DRM_IOCTL_MODE_RMFB [drm:intel_crtc_set_config], [CRTC:3] [NOFB] v2: drm_ioctls is now a constant (Ville Syrjälä) Signed-off-by: Chris Cummins Signed-off-by: Dave Airlie --- include/drm/drmP.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/drm/drmP.h b/include/drm/drmP.h index f1ce786736e4..b092b5bcf227 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -316,6 +316,7 @@ struct drm_ioctl_desc { int flags; drm_ioctl_t *func; unsigned int cmd_drv; + const char *name; }; /** @@ -324,7 +325,7 @@ struct drm_ioctl_desc { */ #define DRM_IOCTL_DEF_DRV(ioctl, _func, _flags) \ - [DRM_IOCTL_NR(DRM_##ioctl)] = {.cmd = DRM_##ioctl, .func = _func, .flags = _flags, .cmd_drv = DRM_IOCTL_##ioctl} + [DRM_IOCTL_NR(DRM_##ioctl)] = {.cmd = DRM_##ioctl, .func = _func, .flags = _flags, .cmd_drv = DRM_IOCTL_##ioctl, .name = #ioctl} struct drm_magic_entry { struct list_head head; -- cgit v1.2.3 From 7677fc965fba41d1386fa3b76a1f00303f02bb2d Mon Sep 17 00:00:00 2001 From: Rony Efraim Date: Wed, 8 May 2013 22:22:35 +0000 Subject: net/mlx4: Strengthen VLAN tags/priorities enforcement in VST mode Make sure that the following steps are taken: - drop packets sent by the VF with vlan tag - block packets with vlan tag which are steered to the VF - drop/block tagged packets when the policy is priority-tagged - make sure VLAN stripping for received packets is set - make sure force UP bit for the VF QP is set Use enum values for all the above instead of numerical bit offsets. Signed-off-by: Rony Efraim Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- include/linux/mlx4/qp.h | 29 +++++++++++++++++++++++++++-- 1 file changed, 27 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/mlx4/qp.h b/include/linux/mlx4/qp.h index 67f46ad6920a..352eec9df1b8 100644 --- a/include/linux/mlx4/qp.h +++ b/include/linux/mlx4/qp.h @@ -126,7 +126,7 @@ struct mlx4_rss_context { struct mlx4_qp_path { u8 fl; - u8 reserved1[1]; + u8 vlan_control; u8 disable_pkey_check; u8 pkey_index; u8 counter_index; @@ -141,11 +141,32 @@ struct mlx4_qp_path { u8 sched_queue; u8 vlan_index; u8 feup; - u8 reserved3; + u8 fvl_rx; u8 reserved4[2]; u8 dmac[6]; }; +enum { /* fl */ + MLX4_FL_CV = 1 << 6, + MLX4_FL_ETH_HIDE_CQE_VLAN = 1 << 2 +}; +enum { /* vlan_control */ + MLX4_VLAN_CTRL_ETH_TX_BLOCK_TAGGED = 1 << 6, + MLX4_VLAN_CTRL_ETH_RX_BLOCK_TAGGED = 1 << 2, + MLX4_VLAN_CTRL_ETH_RX_BLOCK_PRIO_TAGGED = 1 << 1, /* 802.1p priority tag */ + MLX4_VLAN_CTRL_ETH_RX_BLOCK_UNTAGGED = 1 << 0 +}; + +enum { /* feup */ + MLX4_FEUP_FORCE_ETH_UP = 1 << 6, /* force Eth UP */ + MLX4_FSM_FORCE_ETH_SRC_MAC = 1 << 5, /* force Source MAC */ + MLX4_FVL_FORCE_ETH_VLAN = 1 << 3 /* force Eth vlan */ +}; + +enum { /* fvl_rx */ + MLX4_FVL_RX_FORCE_ETH_VLAN = 1 << 0 /* enforce Eth rx vlan */ +}; + struct mlx4_qp_context { __be32 flags; __be32 pd; @@ -185,6 +206,10 @@ struct mlx4_qp_context { u32 reserved5[10]; }; +enum { /* param3 */ + MLX4_STRIP_VLAN = 1 << 30 +}; + /* Which firmware version adds support for NEC (NoErrorCompletion) bit */ #define MLX4_FW_VER_WQE_CTRL_NEC mlx4_fw_ver(2, 2, 232) -- cgit v1.2.3 From f77d602124d865c38705df7fa25c03de9c284ad2 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 9 May 2013 10:28:16 +0000 Subject: ipv6: do not clear pinet6 field We have seen multiple NULL dereferences in __inet6_lookup_established() After analysis, I found that inet6_sk() could be NULL while the check for sk_family == AF_INET6 was true. Bug was added in linux-2.6.29 when RCU lookups were introduced in UDP and TCP stacks. Once an IPv6 socket, using SLAB_DESTROY_BY_RCU is inserted in a hash table, we no longer can clear pinet6 field. This patch extends logic used in commit fcbdf09d9652c891 ("net: fix nulls list corruptions in sk_prot_alloc") TCP/UDP/UDPLite IPv6 protocols provide their own .clear_sk() method to make sure we do not clear pinet6 field. At socket clone phase, we do not really care, as cloning the parent (non NULL) pinet6 is not adding a fatal race. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/net/sock.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include') diff --git a/include/net/sock.h b/include/net/sock.h index 5c97b0fc5623..66772cf8c3c5 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -866,6 +866,18 @@ struct inet_hashinfo; struct raw_hashinfo; struct module; +/* + * caches using SLAB_DESTROY_BY_RCU should let .next pointer from nulls nodes + * un-modified. Special care is taken when initializing object to zero. + */ +static inline void sk_prot_clear_nulls(struct sock *sk, int size) +{ + if (offsetof(struct sock, sk_node.next) != 0) + memset(sk, 0, offsetof(struct sock, sk_node.next)); + memset(&sk->sk_node.pprev, 0, + size - offsetof(struct sock, sk_node.pprev)); +} + /* Networking protocol blocks we attach to sockets. * socket layer -> transport layer interface * transport -> network interface is defined by struct inet_proto -- cgit v1.2.3 From 0a3b15ac3cc3ddc791901e12bdc930b5fa11a30a Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 2 May 2013 21:54:37 +0200 Subject: ACPI / PM: Move processor suspend/resume to syscore_ops The system suspend routine of the ACPI processor driver saves the BUS_MASTER_RLD register and its resume routine restores it. However, there can be only one such register in the system and it really should be saved after non-boot CPUs have been offlined and restored before they are put back online during resume. For this reason, move the saving and restoration of BUS_MASTER_RLD to syscore suspend and syscore resume, respectively, and drop the no longer necessary suspend/resume callbacks from the ACPI processor driver. Signed-off-by: Rafael J. Wysocki --- include/acpi/processor.h | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/acpi/processor.h b/include/acpi/processor.h index b327b5a9296d..ea69367fdd3b 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -329,10 +329,16 @@ int acpi_processor_power_init(struct acpi_processor *pr); int acpi_processor_power_exit(struct acpi_processor *pr); int acpi_processor_cst_has_changed(struct acpi_processor *pr); int acpi_processor_hotplug(struct acpi_processor *pr); -int acpi_processor_suspend(struct device *dev); -int acpi_processor_resume(struct device *dev); extern struct cpuidle_driver acpi_idle_driver; +#ifdef CONFIG_PM_SLEEP +void acpi_processor_syscore_init(void); +void acpi_processor_syscore_exit(void); +#else +static inline void acpi_processor_syscore_init(void) {} +static inline void acpi_processor_syscore_exit(void) {} +#endif + /* in processor_thermal.c */ int acpi_processor_get_limit_info(struct acpi_processor *pr); extern const struct thermal_cooling_device_ops processor_cooling_ops; -- cgit v1.2.3 From 36200af867e2cf5adc1ff77214b2524f6111736f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jan-Simon=20M=C3=B6ller?= Date: Tue, 30 Apr 2013 09:39:04 +0000 Subject: ACPI: Fix section to __init. Align with usage in acpixf.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes warning during compilation with clang. [rjw: Subject and changelog] Signed-off-by: Jan-Simon Möller Signed-off-by: Rafael J. Wysocki --- include/acpi/acpiosxf.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h index 5b3d2bd4813a..64b8c7639520 100644 --- a/include/acpi/acpiosxf.h +++ b/include/acpi/acpiosxf.h @@ -77,7 +77,7 @@ struct acpi_signal_fatal_info { /* * OSL Initialization and shutdown primitives */ -acpi_status __initdata acpi_os_initialize(void); +acpi_status __init acpi_os_initialize(void); acpi_status acpi_os_terminate(void); -- cgit v1.2.3 From 95643359f8b31e74b35901f4e36cd069cd67fd48 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 13 May 2013 15:23:49 +1000 Subject: drm: remove unused wrapper macros We don't use these anymore so nuke them. Signed-off-by: Dave Airlie --- include/drm/drm_os_linux.h | 9 --------- 1 file changed, 9 deletions(-) (limited to 'include') diff --git a/include/drm/drm_os_linux.h b/include/drm/drm_os_linux.h index 393369147a2d..675ddf4b441f 100644 --- a/include/drm/drm_os_linux.h +++ b/include/drm/drm_os_linux.h @@ -87,15 +87,6 @@ static __inline__ int mtrr_del(int reg, unsigned long base, unsigned long size) /** Other copying of data from kernel space */ #define DRM_COPY_TO_USER(arg1, arg2, arg3) \ copy_to_user(arg1, arg2, arg3) -/* Macros for copyfrom user, but checking readability only once */ -#define DRM_VERIFYAREA_READ( uaddr, size ) \ - (access_ok( VERIFY_READ, uaddr, size ) ? 0 : -EFAULT) -#define DRM_COPY_FROM_USER_UNCHECKED(arg1, arg2, arg3) \ - __copy_from_user(arg1, arg2, arg3) -#define DRM_COPY_TO_USER_UNCHECKED(arg1, arg2, arg3) \ - __copy_to_user(arg1, arg2, arg3) -#define DRM_GET_USER_UNCHECKED(val, uaddr) \ - __get_user(val, uaddr) #define DRM_HZ HZ -- cgit v1.2.3 From e2555fde4159467fb579e6ae3c0a8fc33015d0f5 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 13 May 2013 09:45:01 -0400 Subject: jbd,jbd2: fix oops in jbd2_journal_put_journal_head() Commit ae4647fb (jbd2: reduce journal_head size) introduced a regression where we occasionally hit panic in jbd2_journal_put_journal_head() because of wrong b_jcount. The bug is caused by gcc making 64-bit access to 32-bit bitfield and thus clobbering b_jcount. At least for now, those 8 bytes saved in struct journal_head are not worth the trouble with gcc bitfield handling so revert that part of the patch. Reported-by: EUNBONG SONG Reported-by: Tony Luck Signed-off-by: Jan Kara Signed-off-by: "Theodore Ts'o" --- include/linux/journal-head.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/journal-head.h b/include/linux/journal-head.h index 13a3da25ff07..98cd41bb39c8 100644 --- a/include/linux/journal-head.h +++ b/include/linux/journal-head.h @@ -30,15 +30,19 @@ struct journal_head { /* * Journalling list for this buffer [jbd_lock_bh_state()] + * NOTE: We *cannot* combine this with b_modified into a bitfield + * as gcc would then (which the C standard allows but which is + * very unuseful) make 64-bit accesses to the bitfield and clobber + * b_jcount if its update races with bitfield modification. */ - unsigned b_jlist:4; + unsigned b_jlist; /* * This flag signals the buffer has been modified by * the currently running transaction * [jbd_lock_bh_state()] */ - unsigned b_modified:1; + unsigned b_modified; /* * Copy of the buffer data frozen for writing to the log. -- cgit v1.2.3 From ee8209fd026b074bb8eb75bece516a338a281b1b Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 8 May 2013 11:55:48 +0300 Subject: dma: acpi-dma: parse CSRT to extract additional resources Since we have CSRT only to get additional DMA controller resources, let's get rid of drivers/acpi/csrt.c and move its logic inside ACPI DMA helpers code. Signed-off-by: Andy Shevchenko Signed-off-by: Mika Westerberg Acked-by: Rafael J. Wysocki Signed-off-by: Vinod Koul --- include/linux/acpi_dma.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/linux/acpi_dma.h b/include/linux/acpi_dma.h index d09deabc7bf6..fb0298082916 100644 --- a/include/linux/acpi_dma.h +++ b/include/linux/acpi_dma.h @@ -37,6 +37,8 @@ struct acpi_dma_spec { * @dev: struct device of this controller * @acpi_dma_xlate: callback function to find a suitable channel * @data: private data used by a callback function + * @base_request_line: first supported request line (CSRT) + * @end_request_line: last supported request line (CSRT) */ struct acpi_dma { struct list_head dma_controllers; @@ -44,6 +46,8 @@ struct acpi_dma { struct dma_chan *(*acpi_dma_xlate) (struct acpi_dma_spec *, struct acpi_dma *); void *data; + unsigned short base_request_line; + unsigned short end_request_line; }; /* Used with acpi_dma_simple_xlate() */ -- cgit v1.2.3 From b59cc200ac025aca597fb21862c1c9e667f2eff2 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 8 May 2013 11:55:49 +0300 Subject: ACPI / LPSS: register clock device for Lynxpoint DMA properly The DMA controller in Lynxpoint is enumerated as a regular ACPI device now. To work properly it is using the LPSS root clock as a functional clock. That's why we have to register the clock device accordingly to the ACPI ID of the DMA controller. The acpi_lpss.c module is responsible to do the job. This patch also removes hardcoded name of the DMA device in clk-lpt.c and the name of the root clock in acpi_lpss.c. Signed-off-by: Rafael J. Wysocki Signed-off-by: Andy Shevchenko Signed-off-by: Vinod Koul --- include/linux/platform_data/clk-lpss.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include') diff --git a/include/linux/platform_data/clk-lpss.h b/include/linux/platform_data/clk-lpss.h index 528e73ce46d2..23901992b9dd 100644 --- a/include/linux/platform_data/clk-lpss.h +++ b/include/linux/platform_data/clk-lpss.h @@ -13,6 +13,11 @@ #ifndef __CLK_LPSS_H #define __CLK_LPSS_H +struct lpss_clk_data { + const char *name; + struct clk *clk; +}; + extern int lpt_clk_init(void); #endif /* __CLK_LPSS_H */ -- cgit v1.2.3 From 63ad9cbff5896dadfee510f631ffcb0176984722 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 23 Apr 2013 15:28:38 +0200 Subject: pinctrl: generic: Fix typos and clarify comments Drive strength controls both sink and source currents, clarify the description accordingly. Signed-off-by: Laurent Pinchart Signed-off-by: Linus Walleij --- include/linux/pinctrl/pinconf-generic.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index 72474e18f1e0..6aa238096622 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -37,17 +37,17 @@ * if it is 0, pull-down is disabled. * @PIN_CONFIG_DRIVE_PUSH_PULL: the pin will be driven actively high and * low, this is the most typical case and is typically achieved with two - * active transistors on the output. Sending this config will enabale + * active transistors on the output. Setting this config will enable * push-pull mode, the argument is ignored. * @PIN_CONFIG_DRIVE_OPEN_DRAIN: the pin will be driven with open drain (open * collector) which means it is usually wired with other output ports - * which are then pulled up with an external resistor. Sending this - * config will enabale open drain mode, the argument is ignored. + * which are then pulled up with an external resistor. Setting this + * config will enable open drain mode, the argument is ignored. * @PIN_CONFIG_DRIVE_OPEN_SOURCE: the pin will be driven with open source - * (open emitter). Sending this config will enabale open drain mode, the + * (open emitter). Setting this config will enable open drain mode, the * argument is ignored. - * @PIN_CONFIG_DRIVE_STRENGTH: the pin will output the current passed as - * argument. The argument is in mA. + * @PIN_CONFIG_DRIVE_STRENGTH: the pin will sink or source at most the current + * passed as argument. The argument is in mA. * @PIN_CONFIG_INPUT_SCHMITT_ENABLE: control schmitt-trigger mode on the pin. * If the argument != 0, schmitt-trigger mode is enabled. If it's 0, * schmitt-trigger mode is disabled. -- cgit v1.2.3 From b4f711ee03d28f776fd2324fd0bd999cc428e4d2 Mon Sep 17 00:00:00 2001 From: John Stultz Date: Wed, 24 Apr 2013 11:32:56 -0700 Subject: time: Revert ALWAYS_USE_PERSISTENT_CLOCK compile time optimizaitons Kay Sievers noted that the ALWAYS_USE_PERSISTENT_CLOCK config, which enables some minor compile time optimization to avoid uncessary code in mostly the suspend/resume path could cause problems for userland. In particular, the dependency for RTC_HCTOSYS on !ALWAYS_USE_PERSISTENT_CLOCK, which avoids setting the time twice and simplifies suspend/resume, has the side effect of causing the /sys/class/rtc/rtcN/hctosys flag to always be zero, and this flag is commonly used by udev to setup the /dev/rtc symlink to /dev/rtcN, which can cause pain for older applications. While the udev rules could use some work to be less fragile, breaking userland should strongly be avoided. Additionally the compile time optimizations are fairly minor, and the code being optimized is likely to be reworked in the future, so lets revert this change. Reported-by: Kay Sievers Signed-off-by: John Stultz Cc: stable #3.9 Cc: Feng Tang Cc: Jason Gunthorpe Link: http://lkml.kernel.org/r/1366828376-18124-1-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner --- include/linux/time.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include') diff --git a/include/linux/time.h b/include/linux/time.h index 22d81b3c955b..d5d229b2e5af 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -117,14 +117,10 @@ static inline bool timespec_valid_strict(const struct timespec *ts) extern bool persistent_clock_exist; -#ifdef ALWAYS_USE_PERSISTENT_CLOCK -#define has_persistent_clock() true -#else static inline bool has_persistent_clock(void) { return persistent_clock_exist; } -#endif extern void read_persistent_clock(struct timespec *ts); extern void read_boot_clock(struct timespec *ts); -- cgit v1.2.3 From a1321ddd27e65c6ada5b9a12cae4ee2612d76893 Mon Sep 17 00:00:00 2001 From: Joern Engel Date: Mon, 13 May 2013 16:30:05 -0400 Subject: target: removed unused transport_state flag Signed-off-by: Joern Engel Signed-off-by: Nicholas Bellinger --- include/target/target_core_base.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 136b7b2f7b32..e773dfa5f98f 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -463,7 +463,6 @@ struct se_cmd { #define CMD_T_ABORTED (1 << 0) #define CMD_T_ACTIVE (1 << 1) #define CMD_T_COMPLETE (1 << 2) -#define CMD_T_QUEUED (1 << 3) #define CMD_T_SENT (1 << 4) #define CMD_T_STOP (1 << 5) #define CMD_T_FAILED (1 << 6) -- cgit v1.2.3 From ccf5ae83a6cf3d9cfe9a7038bfe7cd38ab03d5e1 Mon Sep 17 00:00:00 2001 From: Joern Engel Date: Mon, 13 May 2013 16:30:06 -0400 Subject: target: close target_put_sess_cmd() vs. core_tmr_abort_task() race It is possible for one thread to to take se_sess->sess_cmd_lock in core_tmr_abort_task() before taking a reference count on se_cmd->cmd_kref, while another thread in target_put_sess_cmd() drops se_cmd->cmd_kref before taking se_sess->sess_cmd_lock. This introduces kref_put_spinlock_irqsave() and uses it in target_put_sess_cmd() to close the race window. Signed-off-by: Joern Engel Acked-by: Greg Kroah-Hartman Cc: Signed-off-by: Nicholas Bellinger --- include/linux/kref.h | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) (limited to 'include') diff --git a/include/linux/kref.h b/include/linux/kref.h index 4972e6e9ca93..7419c02085d7 100644 --- a/include/linux/kref.h +++ b/include/linux/kref.h @@ -19,6 +19,7 @@ #include #include #include +#include struct kref { atomic_t refcount; @@ -95,6 +96,38 @@ static inline int kref_put(struct kref *kref, void (*release)(struct kref *kref) return kref_sub(kref, 1, release); } +/** + * kref_put_spinlock_irqsave - decrement refcount for object. + * @kref: object. + * @release: pointer to the function that will clean up the object when the + * last reference to the object is released. + * This pointer is required, and it is not acceptable to pass kfree + * in as this function. + * @lock: lock to take in release case + * + * Behaves identical to kref_put with one exception. If the reference count + * drops to zero, the lock will be taken atomically wrt dropping the reference + * count. The release function has to call spin_unlock() without _irqrestore. + */ +static inline int kref_put_spinlock_irqsave(struct kref *kref, + void (*release)(struct kref *kref), + spinlock_t *lock) +{ + unsigned long flags; + + WARN_ON(release == NULL); + if (atomic_add_unless(&kref->refcount, -1, 1)) + return 0; + spin_lock_irqsave(lock, flags); + if (atomic_dec_and_test(&kref->refcount)) { + release(kref); + local_irq_restore(flags); + return 1; + } + spin_unlock_irqrestore(lock, flags); + return 0; +} + static inline int kref_put_mutex(struct kref *kref, void (*release)(struct kref *kref), struct mutex *lock) -- cgit v1.2.3 From 8cdb46da06ea94543a3b2e53e3e92736421d1093 Mon Sep 17 00:00:00 2001 From: Hans Schillstrom Date: Wed, 15 May 2013 01:23:45 +0000 Subject: netfilter: log: netns NULL ptr bug when calling from conntrack Since (69b34fb netfilter: xt_LOG: add net namespace support for xt_LOG), we hit this: [ 4224.708977] BUG: unable to handle kernel NULL pointer dereference at 0000000000000388 [ 4224.709074] IP: [] ipt_log_packet+0x29/0x270 when callling log functions from conntrack both in and out are NULL i.e. the net pointer is invalid. Adding struct net *net in call to nf_logfn() will secure that there always is a vaild net ptr. Reported as netfilter's bugzilla bug 818: https://bugzilla.netfilter.org/show_bug.cgi?id=818 Reported-by: Ronald Signed-off-by: Hans Schillstrom Signed-off-by: Pablo Neira Ayuso --- include/net/netfilter/nf_log.h | 3 ++- include/net/netfilter/nfnetlink_log.h | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/net/netfilter/nf_log.h b/include/net/netfilter/nf_log.h index 31f1fb9eb784..99eac12d040b 100644 --- a/include/net/netfilter/nf_log.h +++ b/include/net/netfilter/nf_log.h @@ -30,7 +30,8 @@ struct nf_loginfo { } u; }; -typedef void nf_logfn(u_int8_t pf, +typedef void nf_logfn(struct net *net, + u_int8_t pf, unsigned int hooknum, const struct sk_buff *skb, const struct net_device *in, diff --git a/include/net/netfilter/nfnetlink_log.h b/include/net/netfilter/nfnetlink_log.h index e2dec42c2db2..5ca3f14f0998 100644 --- a/include/net/netfilter/nfnetlink_log.h +++ b/include/net/netfilter/nfnetlink_log.h @@ -2,7 +2,8 @@ #define _KER_NFNETLINK_LOG_H void -nfulnl_log_packet(u_int8_t pf, +nfulnl_log_packet(struct net *net, + u_int8_t pf, unsigned int hooknum, const struct sk_buff *skb, const struct net_device *in, -- cgit v1.2.3 From de97f250394996f5acb07ba9e6dbdfc15ee4316c Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Thu, 2 May 2013 09:51:44 -0400 Subject: Correct typo "supperspeed" to "superspeed". Tidy up kernel-doc content for USB GADGET. No functional change. Signed-off-by: Robert P. J. Day Signed-off-by: Felipe Balbi --- include/linux/usb/gadget.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index c454a88abf2e..f1b0dca60f12 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -563,9 +563,8 @@ static inline int gadget_is_dualspeed(struct usb_gadget *g) } /** - * gadget_is_superspeed() - return true if the hardware handles - * supperspeed - * @g: controller that might support supper speed + * gadget_is_superspeed() - return true if the hardware handles superspeed + * @g: controller that might support superspeed */ static inline int gadget_is_superspeed(struct usb_gadget *g) { -- cgit v1.2.3 From 755ccb9d577b95b43537cfeb36da59140412f858 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 15 May 2013 08:00:25 +0000 Subject: broadcom: add include guards to include/linux/brcmphy.h include/linux/brcmphy.h is currently not protected against double inclusion, add ifdefs guard to fix that. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- include/linux/brcmphy.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include') diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h index b840a4960282..677b4f01b2d0 100644 --- a/include/linux/brcmphy.h +++ b/include/linux/brcmphy.h @@ -1,3 +1,6 @@ +#ifndef _LINUX_BRCMPHY_H +#define _LINUX_BRCMPHY_H + #define PHY_ID_BCM50610 0x0143bd60 #define PHY_ID_BCM50610M 0x0143bd70 #define PHY_ID_BCM5241 0x0143bc30 @@ -29,3 +32,5 @@ #define PHY_BRCM_CLEAR_RGMII_MODE 0x00004000 #define PHY_BRCM_DIS_TXCRXC_NOENRGY 0x00008000 #define PHY_BCM_FLAGS_VALID 0x80000000 + +#endif /* _LINUX_BRCMPHY_H */ -- cgit v1.2.3 From f6b3d85f7f6d66f890862d763b2ed092c5dd4322 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 3 May 2013 10:01:03 +0200 Subject: mac80211: fix spurious RCU warning and update documentation Document rx vs tx status concurrency requirements. Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- include/net/mac80211.h | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 04c2d4670dc6..885898a40d13 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -3043,7 +3043,8 @@ void ieee80211_napi_complete(struct ieee80211_hw *hw); * This function may not be called in IRQ context. Calls to this function * for a single hardware must be synchronized against each other. Calls to * this function, ieee80211_rx_ni() and ieee80211_rx_irqsafe() may not be - * mixed for a single hardware. + * mixed for a single hardware. Must not run concurrently with + * ieee80211_tx_status() or ieee80211_tx_status_ni(). * * In process context use instead ieee80211_rx_ni(). * @@ -3059,7 +3060,8 @@ void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb); * (internally defers to a tasklet.) * * Calls to this function, ieee80211_rx() or ieee80211_rx_ni() may not - * be mixed for a single hardware. + * be mixed for a single hardware.Must not run concurrently with + * ieee80211_tx_status() or ieee80211_tx_status_ni(). * * @hw: the hardware this frame came in on * @skb: the buffer to receive, owned by mac80211 after this call @@ -3073,7 +3075,8 @@ void ieee80211_rx_irqsafe(struct ieee80211_hw *hw, struct sk_buff *skb); * (internally disables bottom halves). * * Calls to this function, ieee80211_rx() and ieee80211_rx_irqsafe() may - * not be mixed for a single hardware. + * not be mixed for a single hardware. Must not run concurrently with + * ieee80211_tx_status() or ieee80211_tx_status_ni(). * * @hw: the hardware this frame came in on * @skb: the buffer to receive, owned by mac80211 after this call @@ -3196,7 +3199,8 @@ void ieee80211_get_tx_rates(struct ieee80211_vif *vif, * This function may not be called in IRQ context. Calls to this function * for a single hardware must be synchronized against each other. Calls * to this function, ieee80211_tx_status_ni() and ieee80211_tx_status_irqsafe() - * may not be mixed for a single hardware. + * may not be mixed for a single hardware. Must not run concurrently with + * ieee80211_rx() or ieee80211_rx_ni(). * * @hw: the hardware the frame was transmitted by * @skb: the frame that was transmitted, owned by mac80211 after this call -- cgit v1.2.3 From b0ce3508b25ea6fa10ae3ca254de1d695b521702 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 16 May 2013 07:34:53 +0000 Subject: bonding: allow TSO being set on bonding master MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In some situations, we need to disable TSO on bonding slaves. bonding device automatically unset TSO in bond_fix_features(), and performance is not good because : 1) We consume more cpu cycles. 2) GSO segmentation has some bugs leading to out of order TCP packets if this segmentation is done before virtual device. This particular problem will be addressed in a separate patch. This patch allows TSO being set/unset on the bonding master, so that GSO segmentation is done after bonding layer. Signed-off-by: Eric Dumazet Cc: Michał Mirosław Cc: Jay Vosburgh Cc: Andy Gospodarek Cc: Maciej Żenczykowski Cc: Tom Herbert Cc: Neal Cardwell Cc: Yuchung Cheng Signed-off-by: David S. Miller --- include/linux/netdevice.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index a94a5a0ab122..60584b185a0c 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2733,6 +2733,17 @@ static inline netdev_features_t netdev_get_wanted_features( } netdev_features_t netdev_increment_features(netdev_features_t all, netdev_features_t one, netdev_features_t mask); + +/* Allow TSO being used on stacked device : + * Performing the GSO segmentation before last device + * is a performance improvement. + */ +static inline netdev_features_t netdev_add_tso_features(netdev_features_t features, + netdev_features_t mask) +{ + return netdev_increment_features(features, NETIF_F_ALL_TSO, mask); +} + int __netdev_update_features(struct net_device *dev); void netdev_update_features(struct net_device *dev); void netdev_change_features(struct net_device *dev); -- cgit v1.2.3 From 0b8ebdb18888c55588b932f4f564b9c9529de627 Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Thu, 9 May 2013 13:08:08 +0200 Subject: mfd: ab8500-sysctrl: Always enable pm_power_off handler AB8500 sysctrl driver implements a pm_power_off handler, but that is currently not registered until a specific platform data field is enabled. This patch drops the platform data field and always registers ab8500_power_off if no other pm_power_off handler was defined before, and also introduces the necessary cleanup code in the driver's remove function. Acked-by: Linus Walleij Signed-off-by: Fabio Baltieri Signed-off-by: Lee Jones Signed-off-by: Samuel Ortiz --- include/linux/mfd/abx500/ab8500.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h index fb1bf7d6a410..0390d5943ed6 100644 --- a/include/linux/mfd/abx500/ab8500.h +++ b/include/linux/mfd/abx500/ab8500.h @@ -373,13 +373,11 @@ struct ab8500_sysctrl_platform_data; /** * struct ab8500_platform_data - AB8500 platform data * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used - * @pm_power_off: Should machine pm power off hook be registered or not * @init: board-specific initialization after detection of ab8500 * @regulator: machine-specific constraints for regulators */ struct ab8500_platform_data { int irq_base; - bool pm_power_off; void (*init) (struct ab8500 *); struct ab8500_regulator_platform_data *regulator; struct abx500_gpio_platform_data *gpio; -- cgit v1.2.3 From 0693196fe7bbb5e6cafd255dfce91ff6d10bc18f Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sun, 5 May 2013 20:32:27 +0200 Subject: USB: serial: add wait_until_sent operation Add wait_until_sent operation which can be used to wait for hardware buffers to drain. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/serial.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index b9b0f7b4e43b..afbb7eeaac5f 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -268,6 +268,7 @@ struct usb_serial_driver { struct usb_serial_port *port, struct ktermios *old); void (*break_ctl)(struct tty_struct *tty, int break_state); int (*chars_in_buffer)(struct tty_struct *tty); + void (*wait_until_sent)(struct tty_struct *tty, long timeout); void (*throttle)(struct tty_struct *tty); void (*unthrottle)(struct tty_struct *tty); int (*tiocmget)(struct tty_struct *tty); -- cgit v1.2.3 From dcf0105039660e951dfea348d317043d17988dfc Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 8 May 2013 17:51:43 +0200 Subject: USB: serial: add generic wait_until_sent implementation Add generic wait_until_sent implementation which polls for empty hardware buffers using the new port-operation tx_empty. The generic implementation will be used for all sub-drivers that implement tx_empty but does not define wait_until_sent. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/serial.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index afbb7eeaac5f..302ddf55d2da 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -269,6 +269,7 @@ struct usb_serial_driver { void (*break_ctl)(struct tty_struct *tty, int break_state); int (*chars_in_buffer)(struct tty_struct *tty); void (*wait_until_sent)(struct tty_struct *tty, long timeout); + bool (*tx_empty)(struct usb_serial_port *port); void (*throttle)(struct tty_struct *tty); void (*unthrottle)(struct tty_struct *tty); int (*tiocmget)(struct tty_struct *tty); @@ -328,6 +329,8 @@ extern void usb_serial_generic_close(struct usb_serial_port *port); extern int usb_serial_generic_resume(struct usb_serial *serial); extern int usb_serial_generic_write_room(struct tty_struct *tty); extern int usb_serial_generic_chars_in_buffer(struct tty_struct *tty); +extern void usb_serial_generic_wait_until_sent(struct tty_struct *tty, + long timeout); extern void usb_serial_generic_read_bulk_callback(struct urb *urb); extern void usb_serial_generic_write_bulk_callback(struct urb *urb); extern void usb_serial_generic_throttle(struct tty_struct *tty); -- cgit v1.2.3 From d4988d4c733ba0b61cb372edd3d1992d26dd10d3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Thu, 9 May 2013 21:24:24 +0200 Subject: bcma: add more core IDs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit PCIe and ARM CR4 cores were found on 14e4:43b1 AKA BCM4352. Reported-by: Gabriel Thörnblad Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- include/linux/bcma/bcma.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index f14a98a79c9d..2e34db82a643 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -134,7 +134,10 @@ struct bcma_host_ops { #define BCMA_CORE_I2S 0x834 #define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */ #define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */ -#define BCMA_CORE_ARM_CR4 0x83e +#define BCMA_CORE_PHY_AC 0x83B +#define BCMA_CORE_PCIE2 0x83C /* PCI Express Gen2 */ +#define BCMA_CORE_USB30_DEV 0x83D +#define BCMA_CORE_ARM_CR4 0x83E #define BCMA_CORE_DEFAULT 0xFFF #define BCMA_MAX_NR_CORES 16 -- cgit v1.2.3 From 3f327e39b4b8f760c331bb2836735be6d83fbf53 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 7 May 2013 11:06:03 -0600 Subject: PCI: acpiphp: Re-enumerate devices when host bridge receives Bus Check When a PCI host bridge device receives a Bus Check notification, we must re-enumerate starting with the bridge to discover changes (devices that have been added or removed). Prior to 668192b678 ("PCI: acpiphp: Move host bridge hotplug to pci_root.c"), this happened in _handle_hotplug_event_bridge(). After that commit, _handle_hotplug_event_bridge() is not installed for host bridges, and the host bridge notify handler, _handle_hotplug_event_root() did not re-enumerate. This patch adds re-enumeration to _handle_hotplug_event_root(). This fixes cases where we don't notice the addition or removal of PCI devices, e.g., the PCI-to-USB ExpressCard in the bugzilla below. [bhelgaas: changelog, references] Reference: https://lkml.kernel.org/r/CAAh6nkmbKR3HTqm5ommevsBwhL_u0N8Rk7Wsms_LfP=nBgKNew@mail.gmail.com Reference: https://bugzilla.kernel.org/show_bug.cgi?id=57961 Reported-by: Gavin Guo Tested-by: Gavin Guo Signed-off-by: Yinghai Lu Signed-off-by: Bjorn Helgaas Reviewed-by: Jiang Liu Acked-by: Rafael J. Wysocki CC: stable@vger.kernel.org # v3.9+ --- include/linux/pci-acpi.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h index 81b31613eb25..170447977278 100644 --- a/include/linux/pci-acpi.h +++ b/include/linux/pci-acpi.h @@ -60,11 +60,13 @@ static inline void acpi_pci_slot_remove(struct pci_bus *bus) { } void acpiphp_init(void); void acpiphp_enumerate_slots(struct pci_bus *bus, acpi_handle handle); void acpiphp_remove_slots(struct pci_bus *bus); +void acpiphp_check_host_bridge(acpi_handle handle); #else static inline void acpiphp_init(void) { } static inline void acpiphp_enumerate_slots(struct pci_bus *bus, acpi_handle handle) { } static inline void acpiphp_remove_slots(struct pci_bus *bus) { } +static inline void acpiphp_check_host_bridge(acpi_handle handle) { } #endif #else /* CONFIG_ACPI */ -- cgit v1.2.3 From 7f18d05a1af75142d4856a91ffd2f1d8eb553c12 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Wed, 15 May 2013 20:18:41 +0530 Subject: SERIAL: OMAP: Remove the slave idle handling from the driver UART IP slave idle handling now taken care by runtime pm backend(hwmod layer) so remove the hackery from the driver. As discussed on the list, in future if dma mode needs to be brought back to this driver, UART sysc handling needs to be updated in framework such a way that no-idle/force idle profile can be supported. Given the broken dma mode for OMAP uarts, its very unlikely. Acked-by: Greg Kroah-Hartman Tested-by: Vaibhav Bedia Tested-by: Sourav Poddar Signed-off-by: Rajendra nayak Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman # OMAP4/Panda Signed-off-by: Paul Walmsley --- include/linux/platform_data/serial-omap.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/linux/platform_data/serial-omap.h b/include/linux/platform_data/serial-omap.h index ff9b0aab5281..c860c1b314c0 100644 --- a/include/linux/platform_data/serial-omap.h +++ b/include/linux/platform_data/serial-omap.h @@ -43,8 +43,6 @@ struct omap_uart_port_info { int DTR_present; int (*get_context_loss_count)(struct device *); - void (*set_forceidle)(struct device *); - void (*set_noidle)(struct device *); void (*enable_wakeup)(struct device *, bool); }; -- cgit v1.2.3 From d2f83e9078b8114e3b9d09082856c1aac299aa37 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 17 May 2013 09:05:21 +0930 Subject: Hoist memcpy_fromiovec/memcpy_toiovec into lib/ ERROR: "memcpy_fromiovec" [drivers/vhost/vhost_scsi.ko] undefined! That function is only present with CONFIG_NET. Turns out that crypto/algif_skcipher.c also uses that outside net, but it actually needs sockets anyway. In addition, commit 6d4f0139d642c45411a47879325891ce2a7c164a added CONFIG_NET dependency to CONFIG_VMCI for memcpy_toiovec, so hoist that function and revert that commit too. socket.h already includes uio.h, so no callers need updating; trying only broke things fo x86_64 randconfig (thanks Fengguang!). Reported-by: Randy Dunlap Acked-by: David S. Miller Acked-by: Michael S. Tsirkin Signed-off-by: Rusty Russell --- include/linux/socket.h | 2 -- include/linux/uio.h | 3 +++ 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/socket.h b/include/linux/socket.h index 428c37a1f95c..33bf2dfab19d 100644 --- a/include/linux/socket.h +++ b/include/linux/socket.h @@ -305,7 +305,6 @@ struct ucred { extern void cred_to_ucred(struct pid *pid, const struct cred *cred, struct ucred *ucred); -extern int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len); extern int memcpy_fromiovecend(unsigned char *kdata, const struct iovec *iov, int offset, int len); extern int csum_partial_copy_fromiovecend(unsigned char *kdata, @@ -314,7 +313,6 @@ extern int csum_partial_copy_fromiovecend(unsigned char *kdata, unsigned int len, __wsum *csump); extern int verify_iovec(struct msghdr *m, struct iovec *iov, struct sockaddr_storage *address, int mode); -extern int memcpy_toiovec(struct iovec *v, unsigned char *kdata, int len); extern int memcpy_toiovecend(const struct iovec *v, unsigned char *kdata, int offset, int len); extern int move_addr_to_kernel(void __user *uaddr, int ulen, struct sockaddr_storage *kaddr); diff --git a/include/linux/uio.h b/include/linux/uio.h index 629aaf51f30b..c55ce243cc09 100644 --- a/include/linux/uio.h +++ b/include/linux/uio.h @@ -35,4 +35,7 @@ static inline size_t iov_length(const struct iovec *iov, unsigned long nr_segs) } unsigned long iov_shorten(struct iovec *iov, unsigned long nr_segs, size_t to); + +int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len); +int memcpy_toiovec(struct iovec *iov, unsigned char *kdata, int len); #endif -- cgit v1.2.3 From 6407d75afd08545f2252bb39806ffd3f10c7faac Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Fri, 17 May 2013 10:44:15 +0930 Subject: virtio_console: fix uapi header uapi should use __u32 not u32. Fix a macro in virtio_console.h which uses u32. Signed-off-by: Michael S. Tsirkin Signed-off-by: Rusty Russell Cc: stable@kernel.org --- include/uapi/linux/virtio_console.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/uapi/linux/virtio_console.h b/include/uapi/linux/virtio_console.h index ee13ab6c3614..c312f16bc4e7 100644 --- a/include/uapi/linux/virtio_console.h +++ b/include/uapi/linux/virtio_console.h @@ -39,7 +39,7 @@ #define VIRTIO_CONSOLE_F_SIZE 0 /* Does host provide console size? */ #define VIRTIO_CONSOLE_F_MULTIPORT 1 /* Does host provide multiple ports? */ -#define VIRTIO_CONSOLE_BAD_ID (~(u32)0) +#define VIRTIO_CONSOLE_BAD_ID (~(__u32)0) struct virtio_console_config { /* colums of the screens */ -- cgit v1.2.3 From 2a0f90551a76a626fd6a606877c8635f52f066e6 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 27 Jul 2012 18:48:52 -0400 Subject: drm/radeon: add Hainan pci ids MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Alex Deucher Reviewed-by: Christian König --- include/drm/drm_pciids.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include') diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index c2af598f701d..bb1bc485390b 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -152,6 +152,12 @@ {0x1002, 0x6621, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6623, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6631, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_OLAND|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6660, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6663, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6664, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6665, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6667, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x666F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HAINAN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6700, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6701, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6702, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAYMAN|RADEON_NEW_MEMMAP}, \ -- cgit v1.2.3 From 421b40a6286ee343d77d5e51f5ee6d04d7a2a90f Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Fri, 17 May 2013 12:41:03 -0400 Subject: tty/vt: Fix vc_deallocate() lock order Now that the tty port owns the flip buffers and i/o is allowed from the driver even when no tty is attached, the destruction of the tty port (and the flip buffers) must ensure that no outstanding work is pending. Unfortunately, this creates a lock order problem with the console_lock (see attached lockdep report [1] below). For single console deallocation, drop the console_lock prior to port destruction. When multiple console deallocation, defer port destruction until the consoles have been deallocated. tty_port_destroy() is not required if the port has not been used; remove from vc_allocate() failure path. [1] lockdep report from Dave Jones ====================================================== [ INFO: possible circular locking dependency detected ] 3.9.0+ #16 Not tainted ------------------------------------------------------- (agetty)/26163 is trying to acquire lock: blocked: ((&buf->work)){+.+...}, instance: ffff88011c8b0020, at: [] flush_work+0x5/0x2e0 but task is already holding lock: blocked: (console_lock){+.+.+.}, instance: ffffffff81c2fde0, at: [] vt_ioctl+0xb61/0x1230 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (console_lock){+.+.+.}: [] lock_acquire+0xa4/0x210 [] console_lock+0x77/0x80 [] con_flush_chars+0x2d/0x50 [] n_tty_receive_buf+0x122/0x14d0 [] flush_to_ldisc+0x119/0x170 [] process_one_work+0x211/0x700 [] worker_thread+0x11b/0x3a0 [] kthread+0xed/0x100 [] ret_from_fork+0x7c/0xb0 -> #0 ((&buf->work)){+.+...}: [] __lock_acquire+0x193a/0x1c00 [] lock_acquire+0xa4/0x210 [] flush_work+0x4e/0x2e0 [] __cancel_work_timer+0x95/0x130 [] cancel_work_sync+0x10/0x20 [] tty_port_destroy+0x12/0x20 [] vc_deallocate+0xf8/0x110 [] vt_ioctl+0xb6c/0x1230 [] tty_ioctl+0x285/0xd50 [] do_vfs_ioctl+0x305/0x530 [] sys_ioctl+0x81/0xa0 [] system_call_fastpath+0x16/0x1b other info that might help us debug this: [ 6760.076175] Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(console_lock); lock((&buf->work)); lock(console_lock); lock((&buf->work)); *** DEADLOCK *** 1 lock on stack by (agetty)/26163: #0: blocked: (console_lock){+.+.+.}, instance: ffffffff81c2fde0, at: [] vt_ioctl+0xb61/0x1230 stack backtrace: Pid: 26163, comm: (agetty) Not tainted 3.9.0+ #16 Call Trace: [] print_circular_bug+0x200/0x20e [] __lock_acquire+0x193a/0x1c00 [] ? sched_clock+0x9/0x10 [] ? sched_clock+0x9/0x10 [] ? native_sched_clock+0x20/0x80 [] lock_acquire+0xa4/0x210 [] ? flush_work+0x5/0x2e0 [] flush_work+0x4e/0x2e0 [] ? flush_work+0x5/0x2e0 [] ? mark_held_locks+0xbb/0x140 [] ? __free_pages_ok.part.57+0x93/0xc0 [] ? mark_held_locks+0xbb/0x140 [] ? __cancel_work_timer+0x82/0x130 [] __cancel_work_timer+0x95/0x130 [] cancel_work_sync+0x10/0x20 [] tty_port_destroy+0x12/0x20 [] vc_deallocate+0xf8/0x110 [] vt_ioctl+0xb6c/0x1230 [] ? lock_release_holdtime.part.30+0xa1/0x170 [] tty_ioctl+0x285/0xd50 [] ? inode_has_perm.isra.46.constprop.61+0x56/0x80 [] do_vfs_ioctl+0x305/0x530 [] ? selinux_file_ioctl+0x5b/0x110 [] sys_ioctl+0x81/0xa0 [] system_call_fastpath+0x16/0x1b Cc: Dave Jones Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- include/linux/vt_kern.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h index e8d65718560b..0d33fca48774 100644 --- a/include/linux/vt_kern.h +++ b/include/linux/vt_kern.h @@ -36,7 +36,7 @@ extern int fg_console, last_console, want_console; int vc_allocate(unsigned int console); int vc_cons_allocated(unsigned int console); int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines); -void vc_deallocate(unsigned int console); +struct vc_data *vc_deallocate(unsigned int console); void reset_palette(struct vc_data *vc); void do_blank_screen(int entering_gfx); void do_unblank_screen(int leaving_gfx); -- cgit v1.2.3 From ec4602a9588a196fa1a9af46bfdd37cbf5792db4 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 16 May 2013 22:29:28 +0200 Subject: ACPI / PM: Allow device power states to be used for CONFIG_PM unset Currently, drivers/acpi/device_pm.c depends on CONFIG_PM and all of the functions defined in there are replaced with static inline stubs if that option is unset. However, CONFIG_PM means, roughly, "runtime PM or suspend/hibernation support" and some of those functions are useful regardless of that. For example, they are used by the ACPI fan driver for controlling fans and acpi_device_set_power() is called during device removal. Moreover, device initialization may depend on setting device power states properly. For these reasons, make the routines manipulating ACPI device power states defined in drivers/acpi/device_pm.c available for CONFIG_PM unset too. Reported-by: Zhang Rui Reported-and-tested-by: Michel Lespinasse Signed-off-by: Rafael J. Wysocki Cc: 3.9+ --- include/acpi/acpi_bus.h | 40 +++++----------------------------------- 1 file changed, 5 insertions(+), 35 deletions(-) (limited to 'include') diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 98db31d9f9b4..636c59f2003a 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -377,7 +377,6 @@ acpi_status acpi_bus_get_status_handle(acpi_handle handle, unsigned long long *sta); int acpi_bus_get_status(struct acpi_device *device); -#ifdef CONFIG_PM int acpi_bus_set_power(acpi_handle handle, int state); const char *acpi_power_state_string(int state); int acpi_device_get_power(struct acpi_device *device, int *state); @@ -385,41 +384,12 @@ int acpi_device_set_power(struct acpi_device *device, int state); int acpi_bus_init_power(struct acpi_device *device); int acpi_bus_update_power(acpi_handle handle, int *state_p); bool acpi_bus_power_manageable(acpi_handle handle); + +#ifdef CONFIG_PM bool acpi_bus_can_wakeup(acpi_handle handle); -#else /* !CONFIG_PM */ -static inline int acpi_bus_set_power(acpi_handle handle, int state) -{ - return 0; -} -static inline const char *acpi_power_state_string(int state) -{ - return "D0"; -} -static inline int acpi_device_get_power(struct acpi_device *device, int *state) -{ - return 0; -} -static inline int acpi_device_set_power(struct acpi_device *device, int state) -{ - return 0; -} -static inline int acpi_bus_init_power(struct acpi_device *device) -{ - return 0; -} -static inline int acpi_bus_update_power(acpi_handle handle, int *state_p) -{ - return 0; -} -static inline bool acpi_bus_power_manageable(acpi_handle handle) -{ - return false; -} -static inline bool acpi_bus_can_wakeup(acpi_handle handle) -{ - return false; -} -#endif /* !CONFIG_PM */ +#else +static inline bool acpi_bus_can_wakeup(acpi_handle handle) { return false; } +#endif #ifdef CONFIG_ACPI_PROC_EVENT int acpi_bus_generate_proc_event(struct acpi_device *device, u8 type, int data); -- cgit v1.2.3 From 154c2670087bd7f54688274aca627433e4a7c181 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 21 May 2013 10:51:10 +0200 Subject: Add include dependencies to . MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If has not been included before , a build error like the below one will result: CC arch/mips/kernel/idle.o In file included from arch/mips/kernel/idle.c:17:0: include/linux/printk.h:109:1: error: data definition has no type or storage class [-Werror] include/linux/printk.h:109:1: error: type defaults to ‘int’ in declaration of ‘asmlinkage’ [-Werror=implicit-int] include/linux/printk.h:110:1: error: ‘format’ attribute only applies to function types [-Werror=attributes] include/linux/printk.h:110:1: error: expected ‘,’ or ‘;’ before ‘int’ include/linux/printk.h:114:1: error: data definition has no type or storage class [-Werror] include/linux/printk.h:114:1: error: type defaults to ‘int’ in declaration of ‘asmlinkage’ [-Werror=implicit-int] include/linux/printk.h:115:1: error: ‘format’ attribute only applies to function types [-Werror=attributes] include/linux/printk.h:115:1: error: expected ‘,’ or ‘;’ before ‘int’ include/linux/printk.h:117:1: error: data definition has no type or storage class [-Werror] include/linux/printk.h:117:1: error: type defaults to ‘int’ in declaration of ‘asmlinkage’ [-Werror=implicit-int] include/linux/printk.h:118:1: error: ‘format’ attribute only applies to function types [-Werror=attributes] include/linux/printk.h:118:1: error: ‘__cold__’ attribute ignored [-Werror=attributes] include/linux/printk.h:118:1: error: expected ‘,’ or ‘;’ before ‘asmlinkage’ include/linux/printk.h:122:1: error: data definition has no type or storage class [-Werror] include/linux/printk.h:122:1: error: type defaults to ‘int’ in declaration of ‘asmlinkage’ [-Werror=implicit-int] include/linux/printk.h:123:1: error: ‘format’ attribute only applies to function types [-Werror=attributes] include/linux/printk.h:123:1: error: ‘__cold__’ attribute ignored [-Werror=attributes] include/linux/printk.h:123:1: error: expected ‘,’ or ‘;’ before ‘int’ In file included from include/linux/kernel.h:14:0, from include/linux/sched.h:15, from arch/mips/kernel/idle.c:18: include/linux/dynamic_debug.h: In function ‘ddebug_dyndbg_module_param_cb’: include/linux/dynamic_debug.h:124:3: error: implicit declaration of function ‘printk’ [-Werror=implicit-function-declaration] Fixed by including . Signed-off-by: Ralf Baechle --- include/linux/printk.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/printk.h b/include/linux/printk.h index 6af944ab38f0..22c7052e9372 100644 --- a/include/linux/printk.h +++ b/include/linux/printk.h @@ -4,6 +4,7 @@ #include #include #include +#include extern const char linux_banner[]; extern const char linux_proc_banner[]; -- cgit v1.2.3 From a11650e11093ed57dca78bf16e7836517c599098 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Fri, 24 May 2013 15:55:05 -0700 Subject: rapidio: make enumeration/discovery configurable Systems that use RapidIO fabric may need to implement their own enumeration and discovery methods which are better suitable for needs of a target application. The following set of patches is intended to simplify process of introduction of new RapidIO fabric enumeration/discovery methods. The first patch offers ability to add new RapidIO enumeration/discovery methods using kernel configuration options. This new configuration option mechanism allows to select statically linked or modular enumeration/discovery method(s) from the list of existing methods or use external module(s). This patch also updates the currently existing enumeration/discovery code to be used as a statically linked or modular method. The corresponding configuration option is named "Basic enumeration/discovery" method. This is the only one configuration option available today but new methods are expected to be introduced after adoption of provided patches. The second patch address a long time complaint of RapidIO subsystem users regarding fabric enumeration/discovery start sequence. Existing implementation offers only a boot-time enumeration/discovery start which requires synchronized boot of all endpoints in RapidIO network. While it works for small closed configurations with limited number of endpoints, using this approach in systems with large number of endpoints is quite challenging. To eliminate requirement for synchronized start the second patch introduces RapidIO enumeration/discovery start from user space. For compatibility with the existing RapidIO subsystem implementation, automatic boot time enumeration/discovery start can be configured in by specifying "rio-scan.scan=1" command line parameter if statically linked basic enumeration method is selected. This patch: Rework to implement RapidIO enumeration/discovery method selection combined with ability to use enumeration/discovery as a kernel module. This patch adds ability to introduce new RapidIO enumeration/discovery methods using kernel configuration options. Configuration option mechanism allows to select statically linked or modular enumeration/discovery method from the list of existing methods or use external modules. If a modular enumeration/discovery is selected each RapidIO mport device can have its own method attached to it. The existing enumeration/discovery code was updated to be used as statically linked or modular method. This configuration option is named "Basic enumeration/discovery" method. Several common routines have been moved from rio-scan.c to make them available to other enumeration methods and reduce number of exported symbols. Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Li Yang Cc: Kumar Gala Cc: Andre van Herk Cc: Micha Nelissen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/rio.h | 13 ++++++++++++- include/linux/rio_drv.h | 1 + 2 files changed, 13 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/rio.h b/include/linux/rio.h index a3e784278667..cd3796ee7410 100644 --- a/include/linux/rio.h +++ b/include/linux/rio.h @@ -83,7 +83,6 @@ extern struct bus_type rio_bus_type; extern struct device rio_bus; -extern struct list_head rio_devices; /* list of all devices */ struct rio_mport; struct rio_dev; @@ -237,6 +236,7 @@ enum rio_phy_type { * @name: Port name string * @priv: Master port private data * @dma: DMA device associated with mport + * @nscan: RapidIO network enumeration/discovery operations */ struct rio_mport { struct list_head dbells; /* list of doorbell events */ @@ -262,6 +262,7 @@ struct rio_mport { #ifdef CONFIG_RAPIDIO_DMA_ENGINE struct dma_device dma; #endif + struct rio_scan *nscan; }; struct rio_id_table { @@ -460,6 +461,16 @@ static inline struct rio_mport *dma_to_mport(struct dma_device *ddev) } #endif /* CONFIG_RAPIDIO_DMA_ENGINE */ +/** + * struct rio_scan - RIO enumeration and discovery operations + * @enumerate: Callback to perform RapidIO fabric enumeration. + * @discover: Callback to perform RapidIO fabric discovery. + */ +struct rio_scan { + int (*enumerate)(struct rio_mport *mport); + int (*discover)(struct rio_mport *mport); +}; + /* Architecture and hardware-specific functions */ extern int rio_register_mport(struct rio_mport *); extern int rio_open_inb_mbox(struct rio_mport *, void *, int, int); diff --git a/include/linux/rio_drv.h b/include/linux/rio_drv.h index b75c05920ab5..5059994fe297 100644 --- a/include/linux/rio_drv.h +++ b/include/linux/rio_drv.h @@ -433,5 +433,6 @@ extern u16 rio_local_get_device_id(struct rio_mport *port); extern struct rio_dev *rio_get_device(u16 vid, u16 did, struct rio_dev *from); extern struct rio_dev *rio_get_asm(u16 vid, u16 did, u16 asm_vid, u16 asm_did, struct rio_dev *from); +extern int rio_init_mports(void); #endif /* LINUX_RIO_DRV_H */ -- cgit v1.2.3 From bc8fcfea18249640f2728c46d70999dcb7e4dc49 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Fri, 24 May 2013 15:55:06 -0700 Subject: rapidio: add enumeration/discovery start from user space Add RapidIO enumeration/discovery start from user space. User space start allows to defer RapidIO fabric scan until the moment when all participating endpoints are initialized avoiding mandatory synchronized start of all endpoints (which may be challenging in systems with large number of RapidIO endpoints). Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Li Yang Cc: Kumar Gala Cc: Andre van Herk Cc: Micha Nelissen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/rio.h | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/rio.h b/include/linux/rio.h index cd3796ee7410..18e099342e6f 100644 --- a/include/linux/rio.h +++ b/include/linux/rio.h @@ -265,6 +265,11 @@ struct rio_mport { struct rio_scan *nscan; }; +/* + * Enumeration/discovery control flags + */ +#define RIO_SCAN_ENUM_NO_WAIT 0x00000001 /* Do not wait for enum completed */ + struct rio_id_table { u16 start; /* logical minimal id */ u32 max; /* max number of IDs in table */ @@ -467,8 +472,8 @@ static inline struct rio_mport *dma_to_mport(struct dma_device *ddev) * @discover: Callback to perform RapidIO fabric discovery. */ struct rio_scan { - int (*enumerate)(struct rio_mport *mport); - int (*discover)(struct rio_mport *mport); + int (*enumerate)(struct rio_mport *mport, u32 flags); + int (*discover)(struct rio_mport *mport, u32 flags); }; /* Architecture and hardware-specific functions */ -- cgit v1.2.3 From 4c663cfc523a88d97a8309b04a089c27dc57fd7e Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Fri, 24 May 2013 15:55:09 -0700 Subject: wait: fix false timeouts when using wait_event_timeout() Many callers of the wait_event_timeout() and wait_event_interruptible_timeout() expect that the return value will be positive if the specified condition becomes true before the timeout elapses. However, at the moment this isn't guaranteed. If the wake-up handler is delayed enough, the time remaining until timeout will be calculated as 0 - and passed back as a return value - even if the condition became true before the timeout has passed. Fix this by returning at least 1 if the condition becomes true. This semantic is in line with what wait_for_condition_timeout() does; see commit bb10ed09 ("sched: fix wait_for_completion_timeout() spurious failure under heavy load"). Daniel said "We have 3 instances of this bug in drm/i915. One case even where we switch between the interruptible and not interruptible wait_event_timeout variants, foolishly presuming they have the same semantics. I very much like this." One such bug is reported at https://bugs.freedesktop.org/show_bug.cgi?id=64133 Signed-off-by: Imre Deak Acked-by: Daniel Vetter Acked-by: David Howells Acked-by: Jens Axboe Cc: "Paul E. McKenney" Cc: Dave Jones Cc: Lukas Czerner Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/wait.h | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/linux/wait.h b/include/linux/wait.h index ac38be2692d8..1133695eb067 100644 --- a/include/linux/wait.h +++ b/include/linux/wait.h @@ -217,6 +217,8 @@ do { \ if (!ret) \ break; \ } \ + if (!ret && (condition)) \ + ret = 1; \ finish_wait(&wq, &__wait); \ } while (0) @@ -233,8 +235,9 @@ do { \ * wake_up() has to be called after changing any variable that could * change the result of the wait condition. * - * The function returns 0 if the @timeout elapsed, and the remaining - * jiffies if the condition evaluated to true before the timeout elapsed. + * The function returns 0 if the @timeout elapsed, or the remaining + * jiffies (at least 1) if the @condition evaluated to %true before + * the @timeout elapsed. */ #define wait_event_timeout(wq, condition, timeout) \ ({ \ @@ -302,6 +305,8 @@ do { \ ret = -ERESTARTSYS; \ break; \ } \ + if (!ret && (condition)) \ + ret = 1; \ finish_wait(&wq, &__wait); \ } while (0) @@ -318,9 +323,10 @@ do { \ * wake_up() has to be called after changing any variable that could * change the result of the wait condition. * - * The function returns 0 if the @timeout elapsed, -ERESTARTSYS if it - * was interrupted by a signal, and the remaining jiffies otherwise - * if the condition evaluated to true before the timeout elapsed. + * Returns: + * 0 if the @timeout elapsed, -%ERESTARTSYS if it was interrupted by + * a signal, or the remaining jiffies (at least 1) if the @condition + * evaluated to %true before the @timeout elapsed. */ #define wait_event_interruptible_timeout(wq, condition, timeout) \ ({ \ -- cgit v1.2.3 From 7450231fb35492951e78a91b833fd935171f4e66 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 24 May 2013 15:55:20 -0700 Subject: linux/kernel.h: fix kernel-doc warning Fix kernel-doc warning in : Warning(include/linux/kernel.h:590): No description found for parameter 'ip' scripts/kernel-doc cannot handle macros, functions, or function prototypes between the function or macro that is being documented and its definition, so move these prototypes above the function that is being documented. Signed-off-by: Randy Dunlap Cc: Steven Rostedt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kernel.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/kernel.h b/include/linux/kernel.h index e96329ceb28c..e9ef6d6b51d5 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -562,6 +562,9 @@ int __trace_bprintk(unsigned long ip, const char *fmt, ...); extern __printf(2, 3) int __trace_printk(unsigned long ip, const char *fmt, ...); +extern int __trace_bputs(unsigned long ip, const char *str); +extern int __trace_puts(unsigned long ip, const char *str, int size); + /** * trace_puts - write a string into the ftrace buffer * @str: the string to record @@ -587,8 +590,6 @@ int __trace_printk(unsigned long ip, const char *fmt, ...); * (1 when __trace_bputs is used, strlen(str) when __trace_puts is used) */ -extern int __trace_bputs(unsigned long ip, const char *str); -extern int __trace_puts(unsigned long ip, const char *str, int size); #define trace_puts(str) ({ \ static const char *trace_printk_fmt \ __attribute__((section("__trace_printk_fmt"))) = \ -- cgit v1.2.3