From b40d6376ff470572e2fafb20ca06a68f2d7940cb Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Wed, 10 Dec 2014 15:33:11 +0100 Subject: nl802154: introduce cca mode enums This patch adds enums for 802.15.4 specific CCA settings. Signed-off-by: Alexander Aring Signed-off-by: Marcel Holtmann --- include/net/nl802154.h | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) (limited to 'include') diff --git a/include/net/nl802154.h b/include/net/nl802154.h index 6dbd406ca41b..86c1b2f15b57 100644 --- a/include/net/nl802154.h +++ b/include/net/nl802154.h @@ -119,4 +119,47 @@ enum nl802154_iftype { NL802154_IFTYPE_MAX = NUM_NL802154_IFTYPES - 1 }; +/** + * enum nl802154_cca_modes - cca modes + * + * @__NL802154_CCA_INVALID: cca mode number 0 is reserved + * @NL802154_CCA_ENERGY: Energy above threshold + * @NL802154_CCA_CARRIER: Carrier sense only + * @NL802154_CCA_ENERGY_CARRIER: Carrier sense with energy above threshold + * @NL802154_CCA_ALOHA: CCA shall always report an idle medium + * @NL802154_CCA_UWB_SHR: UWB preamble sense based on the SHR of a frame + * @NL802154_CCA_UWB_MULTIPEXED: UWB preamble sense based on the packet with + * the multiplexed preamble + * @__NL802154_CCA_ATTR_AFTER_LAST: Internal + * @NL802154_CCA_ATTR_MAX: Maximum CCA attribute number + */ +enum nl802154_cca_modes { + __NL802154_CCA_INVALID, + NL802154_CCA_ENERGY, + NL802154_CCA_CARRIER, + NL802154_CCA_ENERGY_CARRIER, + NL802154_CCA_ALOHA, + NL802154_CCA_UWB_SHR, + NL802154_CCA_UWB_MULTIPEXED, + + /* keep last */ + __NL802154_CCA_ATTR_AFTER_LAST, + NL802154_CCA_ATTR_MAX = __NL802154_CCA_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl802154_cca_opts - additional options for cca modes + * + * @NL802154_CCA_OPT_ENERGY_CARRIER_OR: NL802154_CCA_ENERGY_CARRIER with OR + * @NL802154_CCA_OPT_ENERGY_CARRIER_AND: NL802154_CCA_ENERGY_CARRIER with AND + */ +enum nl802154_cca_opts { + NL802154_CCA_OPT_ENERGY_CARRIER_AND, + NL802154_CCA_OPT_ENERGY_CARRIER_OR, + + /* keep last */ + __NL802154_CCA_OPT_ATTR_AFTER_LAST, + NL802154_CCA_OPT_ATTR_MAX = __NL802154_CCA_OPT_ATTR_AFTER_LAST - 1 +}; + #endif /* __NL802154_H */ -- cgit v1.2.3 From 7fe9a3882bb37195c41ab125a0f2852398d2646a Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Wed, 10 Dec 2014 15:33:12 +0100 Subject: ieee802154: rework cca setting The current cca setting handle is a driver specific call. We need to introduce some 802.15.4 specific layer and mapping 802.15.4 cca modes to driver specific ones inside the 802.15.4 driver. This patch will add such 802.15.4 layer and mapping the cca settings to driver specific ones. Signed-off-by: Alexander Aring Signed-off-by: Marcel Holtmann --- include/net/cfg802154.h | 7 ++++++- include/net/ieee802154_netdev.h | 4 +++- include/net/mac802154.h | 5 ++++- 3 files changed, 13 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/net/cfg802154.h b/include/net/cfg802154.h index 7f713acfa106..6ee2618ac78a 100644 --- a/include/net/cfg802154.h +++ b/include/net/cfg802154.h @@ -56,6 +56,11 @@ struct cfg802154_ops { struct wpan_dev *wpan_dev, bool mode); }; +struct wpan_phy_cca { + enum nl802154_cca_modes mode; + enum nl802154_cca_opts opt; +}; + struct wpan_phy { struct mutex pib_lock; @@ -76,7 +81,7 @@ struct wpan_phy { u8 current_page; u32 channels_supported[IEEE802154_MAX_PAGE + 1]; s8 transmit_power; - u8 cca_mode; + struct wpan_phy_cca cca; __le64 perm_extended_addr; diff --git a/include/net/ieee802154_netdev.h b/include/net/ieee802154_netdev.h index 83bb8a73d23c..94a297052442 100644 --- a/include/net/ieee802154_netdev.h +++ b/include/net/ieee802154_netdev.h @@ -28,6 +28,8 @@ #include #include +#include + struct ieee802154_sechdr { #if defined(__LITTLE_ENDIAN_BITFIELD) u8 level:3, @@ -337,7 +339,7 @@ struct ieee802154_mac_params { s8 frame_retries; bool lbt; - u8 cca_mode; + struct wpan_phy_cca cca; s32 cca_ed_level; }; diff --git a/include/net/mac802154.h b/include/net/mac802154.h index c823d910b46c..850647811749 100644 --- a/include/net/mac802154.h +++ b/include/net/mac802154.h @@ -20,6 +20,8 @@ #include #include +#include + /* General MAC frame format: * 2 bytes: Frame Control * 1 byte: Sequence Number @@ -212,7 +214,8 @@ struct ieee802154_ops { unsigned long changed); int (*set_txpower)(struct ieee802154_hw *hw, int db); int (*set_lbt)(struct ieee802154_hw *hw, bool on); - int (*set_cca_mode)(struct ieee802154_hw *hw, u8 mode); + int (*set_cca_mode)(struct ieee802154_hw *hw, + const struct wpan_phy_cca *cca); int (*set_cca_ed_level)(struct ieee802154_hw *hw, s32 level); int (*set_csma_params)(struct ieee802154_hw *hw, -- cgit v1.2.3 From ba2a9506a76450568cbc0d51626d94cf8528c0c7 Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Wed, 10 Dec 2014 15:33:13 +0100 Subject: nl802154: introduce support for cca settings This patch adds support for setting cca parameters via nl802154. Signed-off-by: Alexander Aring Signed-off-by: Marcel Holtmann --- include/net/cfg802154.h | 3 +++ include/net/nl802154.h | 2 +- 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/cfg802154.h b/include/net/cfg802154.h index 6ee2618ac78a..eeda67652766 100644 --- a/include/net/cfg802154.h +++ b/include/net/cfg802154.h @@ -25,6 +25,7 @@ #include struct wpan_phy; +struct wpan_phy_cca; struct cfg802154_ops { struct net_device * (*add_virtual_intf_deprecated)(struct wpan_phy *wpan_phy, @@ -39,6 +40,8 @@ struct cfg802154_ops { int (*del_virtual_intf)(struct wpan_phy *wpan_phy, struct wpan_dev *wpan_dev); int (*set_channel)(struct wpan_phy *wpan_phy, u8 page, u8 channel); + int (*set_cca_mode)(struct wpan_phy *wpan_phy, + const struct wpan_phy_cca *cca); int (*set_pan_id)(struct wpan_phy *wpan_phy, struct wpan_dev *wpan_dev, __le16 pan_id); int (*set_short_addr)(struct wpan_phy *wpan_phy, diff --git a/include/net/nl802154.h b/include/net/nl802154.h index 86c1b2f15b57..f8b5bc997959 100644 --- a/include/net/nl802154.h +++ b/include/net/nl802154.h @@ -82,7 +82,7 @@ enum nl802154_attrs { NL802154_ATTR_TX_POWER, NL802154_ATTR_CCA_MODE, - NL802154_ATTR_CCA_MODE3_AND, + NL802154_ATTR_CCA_OPT, NL802154_ATTR_CCA_ED_LEVEL, NL802154_ATTR_MAX_FRAME_RETRIES, -- cgit v1.2.3 From cab9e3a0559c039b4e13b569fcf393618c661902 Mon Sep 17 00:00:00 2001 From: Jukka Rissanen Date: Fri, 19 Dec 2014 10:39:08 +0200 Subject: Bluetooth: 6lowpan: Add IPSP PSM value The Internet Protocol Support Profile a.k.a BT 6LoWPAN specification is ready so PSM value for it is now known. Signed-off-by: Jukka Rissanen Signed-off-by: Marcel Holtmann --- include/net/bluetooth/l2cap.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h index d1bb342d083f..2239a3753092 100644 --- a/include/net/bluetooth/l2cap.h +++ b/include/net/bluetooth/l2cap.h @@ -248,6 +248,7 @@ struct l2cap_conn_rsp { #define L2CAP_PSM_SDP 0x0001 #define L2CAP_PSM_RFCOMM 0x0003 #define L2CAP_PSM_3DSP 0x0021 +#define L2CAP_PSM_IPSP 0x0023 /* 6LoWPAN */ /* channel identifier */ #define L2CAP_CID_SIGNALING 0x0001 -- cgit v1.2.3 From 1d2dc5b7b32393bb2d818e0de82a66b1a654d329 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Fri, 19 Dec 2014 13:40:19 +0200 Subject: Bluetooth: Split hci_update_page_scan into two functions To keep the parameter list and its semantics clear it makes sense to split the hci_update_page_scan function into two separate functions: one taking a hci_dev and another taking a hci_request. The one taking a hci_dev constructs its own hci_request and then calls the other function. Signed-off-by: Johan Hedberg Signed-off-by: Marcel Holtmann --- include/net/bluetooth/hci_core.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 3c7827005c25..664451a64d72 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -1306,7 +1306,8 @@ bool hci_req_pending(struct hci_dev *hdev); void hci_req_add_le_scan_disable(struct hci_request *req); void hci_req_add_le_passive_scan(struct hci_request *req); -void hci_update_page_scan(struct hci_dev *hdev, struct hci_request *req); +void hci_update_page_scan(struct hci_dev *hdev); +void __hci_update_page_scan(struct hci_request *req); struct sk_buff *__hci_cmd_sync(struct hci_dev *hdev, u16 opcode, u32 plen, const void *param, u32 timeout); -- cgit v1.2.3 From 0857dd3bed62d8f905f61a399d1ed76464b5270f Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Fri, 19 Dec 2014 13:40:20 +0200 Subject: Bluetooth: Split hci_request helpers to hci_request.[ch] None of the hci_request related things in net/bluetooth/hci_core.h are needed anywhere outside of the core bluetooth module. This patch creates a new net/bluetooth/hci_request.c file with its corresponding h-file and moves the functionality there from hci_core.c and hci_core.h. Signed-off-by: Johan Hedberg Signed-off-by: Marcel Holtmann --- include/net/bluetooth/hci_core.h | 25 ------------------------- 1 file changed, 25 deletions(-) (limited to 'include') diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 664451a64d72..93066f70f8ab 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -1284,31 +1284,8 @@ static inline int hci_check_conn_params(u16 min, u16 max, u16 latency, int hci_register_cb(struct hci_cb *hcb); int hci_unregister_cb(struct hci_cb *hcb); -struct hci_request { - struct hci_dev *hdev; - struct sk_buff_head cmd_q; - - /* If something goes wrong when building the HCI request, the error - * value is stored in this field. - */ - int err; -}; - -void hci_req_init(struct hci_request *req, struct hci_dev *hdev); -int hci_req_run(struct hci_request *req, hci_req_complete_t complete); -void hci_req_add(struct hci_request *req, u16 opcode, u32 plen, - const void *param); -void hci_req_add_ev(struct hci_request *req, u16 opcode, u32 plen, - const void *param, u8 event); -void hci_req_cmd_complete(struct hci_dev *hdev, u16 opcode, u8 status); bool hci_req_pending(struct hci_dev *hdev); -void hci_req_add_le_scan_disable(struct hci_request *req); -void hci_req_add_le_passive_scan(struct hci_request *req); - -void hci_update_page_scan(struct hci_dev *hdev); -void __hci_update_page_scan(struct hci_request *req); - struct sk_buff *__hci_cmd_sync(struct hci_dev *hdev, u16 opcode, u32 plen, const void *param, u32 timeout); struct sk_buff *__hci_cmd_sync_ev(struct hci_dev *hdev, u16 opcode, u32 plen, @@ -1418,8 +1395,6 @@ u8 hci_le_conn_update(struct hci_conn *conn, u16 min, u16 max, u16 latency, void hci_le_start_enc(struct hci_conn *conn, __le16 ediv, __le64 rand, __u8 ltk[16]); -int hci_update_random_address(struct hci_request *req, bool require_privacy, - u8 *own_addr_type); void hci_copy_identity_address(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 *bdaddr_type); -- cgit v1.2.3 From 2cf22218b00f46f93b39a9355b830e9e8e4fd077 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Fri, 19 Dec 2014 22:26:00 +0200 Subject: Bluetooth: Add hci_request support for hci_update_background_scan Many places using hci_update_background_scan() try to synchronize whatever they're doing with the help of hci_request callbacks. However, since the hci_update_background_scan() function hasn't so far accepted a hci_request pointer any commands triggered by it have been left out by the synchronization. This patch modifies the API in a similar way as was done for hci_update_page_scan, i.e. there's a variant that takes a hci_request and another one that takes a hci_dev. Signed-off-by: Johan Hedberg Signed-off-by: Marcel Holtmann --- include/net/bluetooth/hci_core.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 93066f70f8ab..8eccdf029500 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -930,8 +930,6 @@ struct hci_conn_params *hci_pend_le_action_lookup(struct list_head *list, bdaddr_t *addr, u8 addr_type); -void hci_update_background_scan(struct hci_dev *hdev); - void hci_uuids_clear(struct hci_dev *hdev); void hci_link_keys_clear(struct hci_dev *hdev); -- cgit v1.2.3 From 5a154e6f71dfd41c7b5cf96a13c83fca91e7df7f Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Fri, 19 Dec 2014 22:26:02 +0200 Subject: Bluetooth: Fix Add Device to wait for HCI before sending cmd_complete This patch updates the Add Device mgmt command handler to use a hci_request to wait for HCI command completion before notifying user space of the mgmt command completion. To do this we need to add an extra hci_request parameter to the hci_conn_params_set function. Since this function has no other users besides mgmt.c it's moved there as a static function. Signed-off-by: Johan Hedberg Signed-off-by: Marcel Holtmann --- include/net/bluetooth/hci_core.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 8eccdf029500..79724c87ab00 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -920,8 +920,6 @@ struct hci_conn_params *hci_conn_params_lookup(struct hci_dev *hdev, bdaddr_t *addr, u8 addr_type); struct hci_conn_params *hci_conn_params_add(struct hci_dev *hdev, bdaddr_t *addr, u8 addr_type); -int hci_conn_params_set(struct hci_dev *hdev, bdaddr_t *addr, u8 addr_type, - u8 auto_connect); void hci_conn_params_del(struct hci_dev *hdev, bdaddr_t *addr, u8 addr_type); void hci_conn_params_clear_all(struct hci_dev *hdev); void hci_conn_params_clear_disabled(struct hci_dev *hdev); -- cgit v1.2.3 From 94a3bd02a6b79b98236d9805a1f95a2857e7696a Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Sat, 20 Dec 2014 16:28:38 +0100 Subject: Bluetooth: Add structures for LE Data Length Extension feature This patch adds the structures for HCI commands and events of the LE Data Length Extension feature from Bluetooth 4.2 specification. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg --- include/net/bluetooth/hci.h | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) (limited to 'include') diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 40129b3838b2..f39926ee06f7 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -343,6 +343,7 @@ enum { #define HCI_LE_ENCRYPTION 0x01 #define HCI_LE_CONN_PARAM_REQ_PROC 0x02 #define HCI_LE_PING 0x10 +#define HCI_LE_DATA_LEN_EXT 0x20 #define HCI_LE_EXT_SCAN_POLICY 0x80 /* Connection modes */ @@ -1371,6 +1372,39 @@ struct hci_cp_le_conn_param_req_neg_reply { __u8 reason; } __packed; +#define HCI_OP_LE_SET_DATA_LEN 0x2022 +struct hci_cp_le_set_data_len { + __le16 handle; + __le16 tx_len; + __le16 tx_time; +} __packed; +struct hci_rp_le_set_data_len { + __u8 status; + __le16 handle; +} __packed; + +#define HCI_OP_LE_READ_DEF_DATA_LEN 0x2023 +struct hci_rp_le_read_def_data_len { + __u8 status; + __le16 tx_len; + __le16 tx_time; +} __packed; + +#define HCI_OP_LE_WRITE_DEF_DATA_LEN 0x2024 +struct hci_cp_le_write_def_data_len { + __le16 tx_len; + __le16 tx_time; +} __packed; + +#define HCI_OP_LE_READ_MAX_DATA_LEN 0x202f +struct hci_rp_le_read_max_data_len { + __u8 status; + __le16 tx_len; + __le16 tx_time; + __le16 rx_len; + __le16 rx_time; +} __packed; + /* ---- HCI Events ---- */ #define HCI_EV_INQUIRY_COMPLETE 0x01 @@ -1796,6 +1830,15 @@ struct hci_ev_le_remote_conn_param_req { __le16 timeout; } __packed; +#define HCI_EV_LE_DATA_LEN_CHANGE 0x07 +struct hci_ev_le_data_len_change { + __le16 handle; + __le16 tx_len; + __le16 tx_time; + __le16 rx_len; + __le16 rx_time; +} __packed; + #define HCI_EV_LE_DIRECT_ADV_REPORT 0x0B struct hci_ev_le_direct_adv_info { __u8 evt_type; -- cgit v1.2.3 From a8e1bfaa55cf8ac4e419a09bdda5bb45bcd8f985 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Sat, 20 Dec 2014 16:28:40 +0100 Subject: Bluetooth: Store default and maximum LE data length settings When the controller supports the LE Data Length Extension feature, the default and maximum data length are read and now stored. For backwards compatibility all values are initialized to the data length values from Bluetooth 4.1 and earlier specifications. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg --- include/net/bluetooth/hci_core.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include') diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 79724c87ab00..f20f6bd668bd 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -220,6 +220,12 @@ struct hci_dev { __u16 le_conn_max_interval; __u16 le_conn_latency; __u16 le_supv_timeout; + __u16 le_def_tx_len; + __u16 le_def_tx_time; + __u16 le_max_tx_len; + __u16 le_max_tx_time; + __u16 le_max_rx_len; + __u16 le_max_rx_time; __u16 discov_interleaved_timeout; __u16 conn_info_min_age; __u16 conn_info_max_age; -- cgit v1.2.3 From 23b9ceb74f8e46bddd61a1e2afd9317221be74b7 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Sat, 20 Dec 2014 17:13:41 +0100 Subject: Bluetooth: Create debugfs directory for each connection handle For every internal representation of a Bluetooth connection which is identified by hci_conn, create a debugfs directory with the handle number as directory name. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg --- include/net/bluetooth/hci_core.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index f20f6bd668bd..3e7e5110f298 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -440,6 +440,7 @@ struct hci_conn { struct delayed_work le_conn_timeout; struct device dev; + struct dentry *debugfs; struct hci_dev *hdev; void *l2cap_data; -- cgit v1.2.3 From 72e4a6bd02204eed0464d6139439d7e89b94266e Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Sat, 20 Dec 2014 18:00:41 +0100 Subject: Bluetooth: Remove duplicate constant for RFCOMM PSM The RFCOMM_PSM constant is actually a duplicate. So remove it and use the L2CAP_PSM_RFCOMM constant instead. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg --- include/net/bluetooth/rfcomm.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/net/bluetooth/rfcomm.h b/include/net/bluetooth/rfcomm.h index 578b83127af1..4190af53a46a 100644 --- a/include/net/bluetooth/rfcomm.h +++ b/include/net/bluetooth/rfcomm.h @@ -24,8 +24,6 @@ #ifndef __RFCOMM_H #define __RFCOMM_H -#define RFCOMM_PSM 3 - #define RFCOMM_CONN_TIMEOUT (HZ * 30) #define RFCOMM_DISC_TIMEOUT (HZ * 20) #define RFCOMM_AUTH_TIMEOUT (HZ * 25) -- cgit v1.2.3 From 711ffa78f4b23e25a6c91cb80be436a48b5e725d Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Fri, 26 Dec 2014 04:42:31 +0100 Subject: Bluetooth: Introduce HCI_QUIRK_BROKEN_LOCAL_COMMANDS constant Some controllers advertise support for Bluetooth 1.2 specification, but they do not support the HCI Read Local Supported Commands command. If that is the case, then the driver can quirk the behavior and force the core to skip this command. This will allow removing vendor specific checks out of the core. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg --- include/net/bluetooth/hci.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include') diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index f39926ee06f7..1849a437f6e1 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -102,6 +102,16 @@ enum { */ HCI_QUIRK_FIXUP_BUFFER_SIZE, + /* When this quirk is set, then the HCI Read Local Supported + * Commands command is not supported. In general Bluetooth 1.2 + * and later controllers should support this command. However + * some controllers indicate Bluetooth 1.2 support, but do + * not support this command. + * + * This quirk must be set before hci_register_dev is called. + */ + HCI_QUIRK_BROKEN_LOCAL_COMMANDS, + /* When this quirk is set, then no stored link key handling * is performed. This is mainly due to the fact that the * HCI Delete Stored Link Key command is advertised, but -- cgit v1.2.3