From b078b564292ab87cdf4a58de3c2f86d4300a161c Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Thu, 27 Sep 2012 17:26:06 +0300 Subject: Bluetooth: Add HCI logical link cmds definitions Add a few definitions to hci.h Signed-off-by: Andrei Emeltchenko Signed-off-by: Gustavo Padovan --- include/net/bluetooth/hci.h | 36 +++++++++++++++++++++++++++++++++++- 1 file changed, 35 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 76b2b6bdcf36..4be26abf6dad 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -556,12 +556,46 @@ struct hci_cp_accept_phy_link { __u8 key[HCI_AMP_LINK_KEY_SIZE]; } __packed; -#define HCI_OP_DISCONN_PHY_LINK 0x0437 +#define HCI_OP_DISCONN_PHY_LINK 0x0437 struct hci_cp_disconn_phy_link { __u8 phy_handle; __u8 reason; } __packed; +struct ext_flow_spec { + __u8 id; + __u8 stype; + __le16 msdu; + __le32 sdu_itime; + __le32 acc_lat; + __le32 flush_to; +} __packed; + +#define HCI_OP_CREATE_LOGICAL_LINK 0x0438 +#define HCI_OP_ACCEPT_LOGICAL_LINK 0x0439 +struct hci_cp_create_accept_logical_link { + __u8 phy_handle; + struct ext_flow_spec tx_flow_spec; + struct ext_flow_spec rx_flow_spec; +} __packed; + +#define HCI_OP_DISCONN_LOGICAL_LINK 0x043a +struct hci_cp_disconn_logical_link { + __le16 log_handle; +} __packed; + +#define HCI_OP_LOGICAL_LINK_CANCEL 0x043b +struct hci_cp_logical_link_cancel { + __u8 phy_handle; + __u8 flow_spec_id; +} __packed; + +struct hci_rp_logical_link_cancel { + __u8 status; + __u8 phy_handle; + __u8 flow_spec_id; +} __packed; + #define HCI_OP_SNIFF_MODE 0x0803 struct hci_cp_sniff_mode { __le16 handle; -- cgit v1.2.3 From f97268fccdd4e76462195216fcab621b8d4a6cd1 Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Thu, 27 Sep 2012 17:26:07 +0300 Subject: Bluetooth: A2MP: Create amp_mgr global list Create amp_mgr_list global list which will be used by different hci devices to find amp_mgr. Signed-off-by: Andrei Emeltchenko Signed-off-by: Gustavo Padovan --- include/net/bluetooth/a2mp.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include') diff --git a/include/net/bluetooth/a2mp.h b/include/net/bluetooth/a2mp.h index 6a76e0a0705e..316c1c803676 100644 --- a/include/net/bluetooth/a2mp.h +++ b/include/net/bluetooth/a2mp.h @@ -19,12 +19,18 @@ #define A2MP_FEAT_EXT 0x8000 +enum amp_mgr_state { + READ_LOC_AMP_INFO, +}; + struct amp_mgr { + struct list_head list; struct l2cap_conn *l2cap_conn; struct l2cap_chan *a2mp_chan; struct kref kref; __u8 ident; __u8 handle; + enum amp_mgr_state state; unsigned long flags; }; @@ -118,9 +124,13 @@ struct a2mp_physlink_rsp { #define A2MP_STATUS_PHYS_LINK_EXISTS 0x05 #define A2MP_STATUS_SECURITY_VIOLATION 0x06 +extern struct list_head amp_mgr_list; +extern struct mutex amp_mgr_list_lock; + void amp_mgr_get(struct amp_mgr *mgr); int amp_mgr_put(struct amp_mgr *mgr); struct l2cap_chan *a2mp_channel_create(struct l2cap_conn *conn, struct sk_buff *skb); +struct amp_mgr *amp_mgr_lookup_by_state(u8 state); #endif /* __A2MP_H */ -- cgit v1.2.3 From 8e2a0d92c56ec6955526a8b60838c9b00f70540d Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Thu, 27 Sep 2012 17:26:08 +0300 Subject: Bluetooth: AMP: Use HCI cmd to Read AMP Info When receiving A2MP Get Info Request execute Read Local AMP Info HCI command to AMP controller with function to be executed upon receiving command complete event. Function will handle A2MP Get Info Response. Signed-off-by: Andrei Emeltchenko Signed-off-by: Gustavo Padovan --- include/net/bluetooth/a2mp.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/net/bluetooth/a2mp.h b/include/net/bluetooth/a2mp.h index 316c1c803676..af594685112e 100644 --- a/include/net/bluetooth/a2mp.h +++ b/include/net/bluetooth/a2mp.h @@ -132,5 +132,7 @@ int amp_mgr_put(struct amp_mgr *mgr); struct l2cap_chan *a2mp_channel_create(struct l2cap_conn *conn, struct sk_buff *skb); struct amp_mgr *amp_mgr_lookup_by_state(u8 state); +void a2mp_send(struct amp_mgr *mgr, u8 code, u8 ident, u16 len, void *data); +void a2mp_send_getinfo_rsp(struct hci_dev *hdev); #endif /* __A2MP_H */ -- cgit v1.2.3 From 903e45411099ae8292f5ce637ad0c72f6fef61db Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Thu, 27 Sep 2012 17:26:09 +0300 Subject: Bluetooth: AMP: Use HCI cmd to Read Loc AMP Assoc When receiving A2MP Get AMP Assoc Request execute Read Local AMP Assoc HCI command to AMP controller. If the AMP Assoc data is larger than it can fit to HCI event only fragment is read. When all fragments are read send A2MP Get AMP Assoc Response. Signed-off-by: Andrei Emeltchenko Signed-off-by: Gustavo Padovan --- include/net/bluetooth/a2mp.h | 2 ++ include/net/bluetooth/amp.h | 21 +++++++++++++++++++++ include/net/bluetooth/hci.h | 2 ++ include/net/bluetooth/hci_core.h | 8 ++++++++ 4 files changed, 33 insertions(+) create mode 100644 include/net/bluetooth/amp.h (limited to 'include') diff --git a/include/net/bluetooth/a2mp.h b/include/net/bluetooth/a2mp.h index af594685112e..d5476719fa4c 100644 --- a/include/net/bluetooth/a2mp.h +++ b/include/net/bluetooth/a2mp.h @@ -21,6 +21,7 @@ enum amp_mgr_state { READ_LOC_AMP_INFO, + READ_LOC_AMP_ASSOC, }; struct amp_mgr { @@ -134,5 +135,6 @@ struct l2cap_chan *a2mp_channel_create(struct l2cap_conn *conn, struct amp_mgr *amp_mgr_lookup_by_state(u8 state); void a2mp_send(struct amp_mgr *mgr, u8 code, u8 ident, u16 len, void *data); void a2mp_send_getinfo_rsp(struct hci_dev *hdev); +void a2mp_send_getampassoc_rsp(struct hci_dev *hdev, u8 status); #endif /* __A2MP_H */ diff --git a/include/net/bluetooth/amp.h b/include/net/bluetooth/amp.h new file mode 100644 index 000000000000..e8616751bc81 --- /dev/null +++ b/include/net/bluetooth/amp.h @@ -0,0 +1,21 @@ +/* + Copyright (c) 2011,2012 Intel Corp. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License version 2 and + only version 2 as published by the Free Software Foundation. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. +*/ + +#ifndef __AMP_H +#define __AMP_H + +void amp_read_loc_info(struct hci_dev *hdev, struct amp_mgr *mgr); +void amp_read_loc_assoc_frag(struct hci_dev *hdev, u8 phy_handle); +void amp_read_loc_assoc(struct hci_dev *hdev, struct amp_mgr *mgr); + +#endif /* __AMP_H */ diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 4be26abf6dad..ccc08e57c107 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -33,6 +33,8 @@ #define HCI_LINK_KEY_SIZE 16 #define HCI_AMP_LINK_KEY_SIZE (2 * HCI_LINK_KEY_SIZE) +#define HCI_MAX_AMP_ASSOC_SIZE 672 + /* HCI dev events */ #define HCI_DEV_REG 1 #define HCI_DEV_UNREG 2 diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index e7d454609881..b1c7d0607244 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -124,6 +124,12 @@ struct le_scan_params { #define HCI_MAX_SHORT_NAME_LENGTH 10 +struct amp_assoc { + __u16 len; + __u16 offset; + __u8 data[HCI_MAX_AMP_ASSOC_SIZE]; +}; + #define NUM_REASSEMBLY 4 struct hci_dev { struct list_head list; @@ -177,6 +183,8 @@ struct hci_dev { __u32 amp_max_flush_to; __u32 amp_be_flush_to; + struct amp_assoc loc_assoc; + __u8 flow_ctl_mode; unsigned int auto_accept_delay; -- cgit v1.2.3 From 3161ae1c72f03b021bc67504c13025626c26d30c Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Thu, 27 Sep 2012 17:26:11 +0300 Subject: Bluetooth: AMP: Physical link struct and helpers Define physical link structures. Physical links are represented by hci_conn structure. For BR/EDR we use type ACL_LINK and for AMP we use AMP_LINK. Signed-off-by: Andrei Emeltchenko Signed-off-by: Gustavo Padovan --- include/net/bluetooth/amp.h | 3 +++ include/net/bluetooth/hci.h | 1 + include/net/bluetooth/hci_core.h | 1 + 3 files changed, 5 insertions(+) (limited to 'include') diff --git a/include/net/bluetooth/amp.h b/include/net/bluetooth/amp.h index e8616751bc81..3414dfdc404c 100644 --- a/include/net/bluetooth/amp.h +++ b/include/net/bluetooth/amp.h @@ -14,6 +14,9 @@ #ifndef __AMP_H #define __AMP_H +struct hci_conn *phylink_add(struct hci_dev *hdev, struct amp_mgr *mgr, + u8 remote_id); + void amp_read_loc_info(struct hci_dev *hdev, struct amp_mgr *mgr); void amp_read_loc_assoc_frag(struct hci_dev *hdev, u8 phy_handle); void amp_read_loc_assoc(struct hci_dev *hdev, struct amp_mgr *mgr); diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index ccc08e57c107..77b6a197a6f6 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -207,6 +207,7 @@ enum { #define ESCO_LINK 0x02 /* Low Energy links do not have defined link type. Use invented one */ #define LE_LINK 0x80 +#define AMP_LINK 0x81 /* LMP features */ #define LMP_3SLOT 0x01 diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index b1c7d0607244..464eae340419 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -318,6 +318,7 @@ struct hci_conn { __u8 remote_cap; __u8 remote_auth; + __u8 remote_id; bool flush_key; unsigned int sent; -- cgit v1.2.3 From 52c0d6e56b634b195e377192182391d526cdd5e4 Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Thu, 27 Sep 2012 17:26:12 +0300 Subject: Bluetooth: AMP: Remote AMP ctrl definitions Create remote AMP controllers structure. It is used to keep information about discovered remote AMP controllers by A2MP protocol. Signed-off-by: Andrei Emeltchenko Signed-off-by: Gustavo Padovan --- include/net/bluetooth/a2mp.h | 3 +++ include/net/bluetooth/amp.h | 15 +++++++++++++++ 2 files changed, 18 insertions(+) (limited to 'include') diff --git a/include/net/bluetooth/a2mp.h b/include/net/bluetooth/a2mp.h index d5476719fa4c..99c7389b9189 100644 --- a/include/net/bluetooth/a2mp.h +++ b/include/net/bluetooth/a2mp.h @@ -33,6 +33,9 @@ struct amp_mgr { __u8 handle; enum amp_mgr_state state; unsigned long flags; + + struct list_head amp_ctrls; + struct mutex amp_ctrls_lock; }; struct a2mp_cmd { diff --git a/include/net/bluetooth/amp.h b/include/net/bluetooth/amp.h index 3414dfdc404c..f57854f0786d 100644 --- a/include/net/bluetooth/amp.h +++ b/include/net/bluetooth/amp.h @@ -14,6 +14,21 @@ #ifndef __AMP_H #define __AMP_H +struct amp_ctrl { + struct list_head list; + struct kref kref; + __u8 id; + __u16 assoc_len_so_far; + __u16 assoc_rem_len; + __u16 assoc_len; + __u8 *assoc; +}; + +int amp_ctrl_put(struct amp_ctrl *ctrl); +struct amp_ctrl *amp_ctrl_add(struct amp_mgr *mgr); +struct amp_ctrl *amp_ctrl_lookup(struct amp_mgr *mgr, u8 id); +void amp_ctrl_list_flush(struct amp_mgr *mgr); + struct hci_conn *phylink_add(struct hci_dev *hdev, struct amp_mgr *mgr, u8 remote_id); -- cgit v1.2.3 From 93c3e8f5c9a0e4dc6b6c93108dcf3ec54ab1191a Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Thu, 27 Sep 2012 17:26:16 +0300 Subject: Bluetooth: Choose connection based on capabilities Choose which L2CAP connection to establish by checking support for HS and remote side supported features. Signed-off-by: Andrei Emeltchenko Signed-off-by: Gustavo Padovan --- include/net/bluetooth/a2mp.h | 2 ++ include/net/bluetooth/l2cap.h | 1 + 2 files changed, 3 insertions(+) (limited to 'include') diff --git a/include/net/bluetooth/a2mp.h b/include/net/bluetooth/a2mp.h index 99c7389b9189..9fda7c94913f 100644 --- a/include/net/bluetooth/a2mp.h +++ b/include/net/bluetooth/a2mp.h @@ -28,6 +28,7 @@ struct amp_mgr { struct list_head list; struct l2cap_conn *l2cap_conn; struct l2cap_chan *a2mp_chan; + struct l2cap_chan *bredr_chan; struct kref kref; __u8 ident; __u8 handle; @@ -137,6 +138,7 @@ struct l2cap_chan *a2mp_channel_create(struct l2cap_conn *conn, struct sk_buff *skb); struct amp_mgr *amp_mgr_lookup_by_state(u8 state); void a2mp_send(struct amp_mgr *mgr, u8 code, u8 ident, u16 len, void *data); +void a2mp_discover_amp(struct l2cap_chan *chan); void a2mp_send_getinfo_rsp(struct hci_dev *hdev); void a2mp_send_getampassoc_rsp(struct hci_dev *hdev, u8 status); diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h index 7ed8e356425a..aba830fc762f 100644 --- a/include/net/bluetooth/l2cap.h +++ b/include/net/bluetooth/l2cap.h @@ -767,6 +767,7 @@ int l2cap_chan_check_security(struct l2cap_chan *chan); void l2cap_chan_set_defaults(struct l2cap_chan *chan); int l2cap_ertm_init(struct l2cap_chan *chan); void l2cap_chan_add(struct l2cap_conn *conn, struct l2cap_chan *chan); +void __l2cap_chan_add(struct l2cap_conn *conn, struct l2cap_chan *chan); void l2cap_chan_del(struct l2cap_chan *chan, int err); #endif /* __L2CAP_H */ -- cgit v1.2.3 From 5a349186692950b13896abc3fb2f491d023f95a1 Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Thu, 27 Sep 2012 17:26:18 +0300 Subject: Bluetooth: AMP: Add AMP key calculation Function calculates AMP keys using hmac_sha256 helper. Calculated keys are Generic AMP Link Key (gamp) and Dedicated AMP Link Key with keyID "802b" for 802.11 PAL. Signed-off-by: Andrei Emeltchenko Signed-off-by: Gustavo Padovan --- include/net/bluetooth/amp.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/net/bluetooth/amp.h b/include/net/bluetooth/amp.h index f57854f0786d..763b4635c304 100644 --- a/include/net/bluetooth/amp.h +++ b/include/net/bluetooth/amp.h @@ -32,6 +32,8 @@ void amp_ctrl_list_flush(struct amp_mgr *mgr); struct hci_conn *phylink_add(struct hci_dev *hdev, struct amp_mgr *mgr, u8 remote_id); +int phylink_gen_key(struct hci_conn *hcon, u8 *data, u8 *len, u8 *type); + void amp_read_loc_info(struct hci_dev *hdev, struct amp_mgr *mgr); void amp_read_loc_assoc_frag(struct hci_dev *hdev, u8 phy_handle); void amp_read_loc_assoc(struct hci_dev *hdev, struct amp_mgr *mgr); -- cgit v1.2.3 From a02226d6ff5098e6b97590cc55aabe7faf0860ed Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Thu, 27 Sep 2012 17:26:19 +0300 Subject: Bluetooth: AMP: Create Physical Link When receiving A2MP Get AMP Assoc Response execute HCI Create Physical Link to AMP controller. Define function which will run when receiving HCI Command Status. Signed-off-by: Andrei Emeltchenko Signed-off-by: Gustavo Padovan --- include/net/bluetooth/amp.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/net/bluetooth/amp.h b/include/net/bluetooth/amp.h index 763b4635c304..cadb3d032856 100644 --- a/include/net/bluetooth/amp.h +++ b/include/net/bluetooth/amp.h @@ -37,5 +37,7 @@ int phylink_gen_key(struct hci_conn *hcon, u8 *data, u8 *len, u8 *type); void amp_read_loc_info(struct hci_dev *hdev, struct amp_mgr *mgr); void amp_read_loc_assoc_frag(struct hci_dev *hdev, u8 phy_handle); void amp_read_loc_assoc(struct hci_dev *hdev, struct amp_mgr *mgr); +void amp_create_phylink(struct hci_dev *hdev, struct amp_mgr *mgr, + struct hci_conn *hcon); #endif /* __AMP_H */ -- cgit v1.2.3 From 93c284ee901f7d7bdd09087e92abefb7496c3777 Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Thu, 27 Sep 2012 17:26:20 +0300 Subject: Bluetooth: AMP: Write remote AMP Assoc When receiving HCI Command Status after HCI Create Physical Link execute HCI Write Remote AMP Assoc command to AMP controller. Signed-off-by: Andrei Emeltchenko Signed-off-by: Gustavo Padovan --- include/net/bluetooth/amp.h | 2 ++ include/net/bluetooth/hci_core.h | 2 ++ 2 files changed, 4 insertions(+) (limited to 'include') diff --git a/include/net/bluetooth/amp.h b/include/net/bluetooth/amp.h index cadb3d032856..8f8032965eaf 100644 --- a/include/net/bluetooth/amp.h +++ b/include/net/bluetooth/amp.h @@ -39,5 +39,7 @@ void amp_read_loc_assoc_frag(struct hci_dev *hdev, u8 phy_handle); void amp_read_loc_assoc(struct hci_dev *hdev, struct amp_mgr *mgr); void amp_create_phylink(struct hci_dev *hdev, struct amp_mgr *mgr, struct hci_conn *hcon); +void amp_write_remote_assoc(struct hci_dev *hdev, u8 handle); +void amp_write_rem_assoc_continue(struct hci_dev *hdev, u8 handle); #endif /* __AMP_H */ diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 464eae340419..ea1f9340324d 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -127,6 +127,8 @@ struct le_scan_params { struct amp_assoc { __u16 len; __u16 offset; + __u16 rem_len; + __u16 len_so_far; __u8 data[HCI_MAX_AMP_ASSOC_SIZE]; }; -- cgit v1.2.3 From 2766be48a7181d7f2a84831ca7e7be248fb6fdb5 Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Thu, 27 Sep 2012 17:26:21 +0300 Subject: Bluetooth: A2MP: Add fallback to normal l2cap init sequence When there is no remote AMP controller found fallback to normal L2CAP sequence. Signed-off-by: Andrei Emeltchenko Signed-off-by: Gustavo Padovan --- include/net/bluetooth/l2cap.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h index aba830fc762f..0967f9e33750 100644 --- a/include/net/bluetooth/l2cap.h +++ b/include/net/bluetooth/l2cap.h @@ -769,5 +769,6 @@ int l2cap_ertm_init(struct l2cap_chan *chan); void l2cap_chan_add(struct l2cap_conn *conn, struct l2cap_chan *chan); void __l2cap_chan_add(struct l2cap_conn *conn, struct l2cap_chan *chan); void l2cap_chan_del(struct l2cap_chan *chan, int err); +void l2cap_send_conn_req(struct l2cap_chan *chan); #endif /* __L2CAP_H */ -- cgit v1.2.3 From 9495b2ee757f7747d7c28f9ba8d7edc53005ec2d Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Thu, 27 Sep 2012 17:26:22 +0300 Subject: Bluetooth: AMP: Process Chan Selected event Channel Selected event indicates that link information data is available. Read it with Read Local AMP Assoc command. The data shall be sent in the A2MP Create Physical Link Request. Signed-off-by: Andrei Emeltchenko Signed-off-by: Gustavo Padovan --- include/net/bluetooth/a2mp.h | 3 +++ include/net/bluetooth/amp.h | 2 ++ include/net/bluetooth/l2cap.h | 2 ++ 3 files changed, 7 insertions(+) (limited to 'include') diff --git a/include/net/bluetooth/a2mp.h b/include/net/bluetooth/a2mp.h index 9fda7c94913f..e776ab2dc572 100644 --- a/include/net/bluetooth/a2mp.h +++ b/include/net/bluetooth/a2mp.h @@ -22,6 +22,7 @@ enum amp_mgr_state { READ_LOC_AMP_INFO, READ_LOC_AMP_ASSOC, + READ_LOC_AMP_ASSOC_FINAL, }; struct amp_mgr { @@ -134,6 +135,7 @@ extern struct mutex amp_mgr_list_lock; void amp_mgr_get(struct amp_mgr *mgr); int amp_mgr_put(struct amp_mgr *mgr); +u8 __next_ident(struct amp_mgr *mgr); struct l2cap_chan *a2mp_channel_create(struct l2cap_conn *conn, struct sk_buff *skb); struct amp_mgr *amp_mgr_lookup_by_state(u8 state); @@ -141,5 +143,6 @@ void a2mp_send(struct amp_mgr *mgr, u8 code, u8 ident, u16 len, void *data); void a2mp_discover_amp(struct l2cap_chan *chan); void a2mp_send_getinfo_rsp(struct hci_dev *hdev); void a2mp_send_getampassoc_rsp(struct hci_dev *hdev, u8 status); +void a2mp_send_create_phy_link_req(struct hci_dev *hdev, u8 status); #endif /* __A2MP_H */ diff --git a/include/net/bluetooth/amp.h b/include/net/bluetooth/amp.h index 8f8032965eaf..70496c07afaa 100644 --- a/include/net/bluetooth/amp.h +++ b/include/net/bluetooth/amp.h @@ -37,6 +37,8 @@ int phylink_gen_key(struct hci_conn *hcon, u8 *data, u8 *len, u8 *type); void amp_read_loc_info(struct hci_dev *hdev, struct amp_mgr *mgr); void amp_read_loc_assoc_frag(struct hci_dev *hdev, u8 phy_handle); void amp_read_loc_assoc(struct hci_dev *hdev, struct amp_mgr *mgr); +void amp_read_loc_assoc_final_data(struct hci_dev *hdev, + struct hci_conn *hcon); void amp_create_phylink(struct hci_dev *hdev, struct amp_mgr *mgr, struct hci_conn *hcon); void amp_write_remote_assoc(struct hci_dev *hdev, u8 handle); diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h index 0967f9e33750..ab58b81fb7c5 100644 --- a/include/net/bluetooth/l2cap.h +++ b/include/net/bluetooth/l2cap.h @@ -508,6 +508,8 @@ struct l2cap_chan { __u32 remote_acc_lat; __u32 remote_flush_to; + __u8 ctrl_id; + struct delayed_work chan_timer; struct delayed_work retrans_timer; struct delayed_work monitor_timer; -- cgit v1.2.3 From dffa387110025801862d7ad09f4e850d06ff55a9 Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Thu, 27 Sep 2012 17:26:23 +0300 Subject: Bluetooth: AMP: Accept Physical Link When receiving A2MP Create Physical Link message execute HCI Accept Physical Link command to AMP controller. Signed-off-by: Andrei Emeltchenko Signed-off-by: Gustavo Padovan --- include/net/bluetooth/amp.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/net/bluetooth/amp.h b/include/net/bluetooth/amp.h index 70496c07afaa..1b06d7b01359 100644 --- a/include/net/bluetooth/amp.h +++ b/include/net/bluetooth/amp.h @@ -41,6 +41,8 @@ void amp_read_loc_assoc_final_data(struct hci_dev *hdev, struct hci_conn *hcon); void amp_create_phylink(struct hci_dev *hdev, struct amp_mgr *mgr, struct hci_conn *hcon); +void amp_accept_phylink(struct hci_dev *hdev, struct amp_mgr *mgr, + struct hci_conn *hcon); void amp_write_remote_assoc(struct hci_dev *hdev, u8 handle); void amp_write_rem_assoc_continue(struct hci_dev *hdev, u8 handle); -- cgit v1.2.3 From 0b26ab9dce74f8ac77d7eef0d683ab1d527e45b1 Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Thu, 27 Sep 2012 17:26:24 +0300 Subject: Bluetooth: AMP: Handle Accept phylink command status evt When receiving HCI Command Status event for Accept Physical Link execute HCI Write Remote AMP Assoc with data saved from A2MP Create Physical Link Request. Signed-off-by: Andrei Emeltchenko Signed-off-by: Gustavo Padovan --- include/net/bluetooth/amp.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/net/bluetooth/amp.h b/include/net/bluetooth/amp.h index 1b06d7b01359..b1e54903dd42 100644 --- a/include/net/bluetooth/amp.h +++ b/include/net/bluetooth/amp.h @@ -25,6 +25,7 @@ struct amp_ctrl { }; int amp_ctrl_put(struct amp_ctrl *ctrl); +void amp_ctrl_get(struct amp_ctrl *ctrl); struct amp_ctrl *amp_ctrl_add(struct amp_mgr *mgr); struct amp_ctrl *amp_ctrl_lookup(struct amp_mgr *mgr, u8 id); void amp_ctrl_list_flush(struct amp_mgr *mgr); -- cgit v1.2.3 From d945df256a7b2446227fafae2f89db85597412ef Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Tue, 25 Sep 2012 12:49:46 +0300 Subject: bluetooth: Remove unneeded batostr function batostr is not needed anymore since for printing Bluetooth addresses we use %pMR specifier. Signed-off-by: Andrei Emeltchenko Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan --- include/net/bluetooth/bluetooth.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h index ede036977ae8..2554b3f5222a 100644 --- a/include/net/bluetooth/bluetooth.h +++ b/include/net/bluetooth/bluetooth.h @@ -180,7 +180,6 @@ static inline void bacpy(bdaddr_t *dst, bdaddr_t *src) } void baswap(bdaddr_t *dst, bdaddr_t *src); -char *batostr(bdaddr_t *ba); /* Common socket structures and functions */ -- cgit v1.2.3 From dfee1ebc0e363ff1dc233c4a5246bf3e7f5c5ca6 Mon Sep 17 00:00:00 2001 From: Rami Rosen Date: Mon, 1 Oct 2012 19:37:31 +0200 Subject: Bluetooth: remove unused member of hci_dev. This patch removes core_data member from hci_dev struct as it is unused. Signed-off-by: Rami Rosen Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan --- include/net/bluetooth/hci_core.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index ea1f9340324d..90ae4f0a4fdc 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -262,8 +262,6 @@ struct hci_dev { struct sk_buff_head driver_init; - void *core_data; - atomic_t promisc; struct dentry *debugfs; -- cgit v1.2.3 From fa4ebc66c432d0e0ec947cb754d4144c4a681f28 Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Fri, 5 Oct 2012 16:56:55 +0300 Subject: Bluetooth: AMP: Factor out amp_ctrl_add Add ctrl_id parameter to amp_ctrl_add since we always set it after function ctrl is created. Signed-off-by: Andrei Emeltchenko Signed-off-by: Gustavo Padovan --- include/net/bluetooth/amp.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/bluetooth/amp.h b/include/net/bluetooth/amp.h index b1e54903dd42..ae2c3e536473 100644 --- a/include/net/bluetooth/amp.h +++ b/include/net/bluetooth/amp.h @@ -26,7 +26,7 @@ struct amp_ctrl { int amp_ctrl_put(struct amp_ctrl *ctrl); void amp_ctrl_get(struct amp_ctrl *ctrl); -struct amp_ctrl *amp_ctrl_add(struct amp_mgr *mgr); +struct amp_ctrl *amp_ctrl_add(struct amp_mgr *mgr, u8 id); struct amp_ctrl *amp_ctrl_lookup(struct amp_mgr *mgr, u8 id); void amp_ctrl_list_flush(struct amp_mgr *mgr); -- cgit v1.2.3 From a0c234fe8972aa6a5afe2db6c27a3f5d5fbd88e7 Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Fri, 5 Oct 2012 16:56:56 +0300 Subject: Bluetooth: AMP: Factor out phylink_add Add direction parameter to phylink_add since it is anyway set later. Signed-off-by: Andrei Emeltchenko Signed-off-by: Gustavo Padovan --- include/net/bluetooth/amp.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/bluetooth/amp.h b/include/net/bluetooth/amp.h index ae2c3e536473..2e7c79ea0463 100644 --- a/include/net/bluetooth/amp.h +++ b/include/net/bluetooth/amp.h @@ -31,7 +31,7 @@ struct amp_ctrl *amp_ctrl_lookup(struct amp_mgr *mgr, u8 id); void amp_ctrl_list_flush(struct amp_mgr *mgr); struct hci_conn *phylink_add(struct hci_dev *hdev, struct amp_mgr *mgr, - u8 remote_id); + u8 remote_id, bool out); int phylink_gen_key(struct hci_conn *hcon, u8 *data, u8 *len, u8 *type); -- cgit v1.2.3 From 0b4558e388e72b6d088a057833bafb816ff8af85 Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Fri, 5 Oct 2012 16:56:58 +0300 Subject: Bluetooth: Adjust L2CAP Max PDU size for AMP packets Maximum PDU size is defined by new BT Spec as 1492 octets. Signed-off-by: Andrei Emeltchenko Reviewed-by: Mat Martineau Signed-off-by: Gustavo Padovan --- include/net/bluetooth/l2cap.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h index ab58b81fb7c5..7002f0d656ed 100644 --- a/include/net/bluetooth/l2cap.h +++ b/include/net/bluetooth/l2cap.h @@ -38,7 +38,7 @@ #define L2CAP_DEFAULT_MAX_TX 3 #define L2CAP_DEFAULT_RETRANS_TO 2000 /* 2 seconds */ #define L2CAP_DEFAULT_MONITOR_TO 12000 /* 12 seconds */ -#define L2CAP_DEFAULT_MAX_PDU_SIZE 1009 /* Sized for 3-DH5 packet */ +#define L2CAP_DEFAULT_MAX_PDU_SIZE 1492 /* Sized for AMP packet */ #define L2CAP_DEFAULT_ACK_TO 200 #define L2CAP_DEFAULT_MAX_SDU_SIZE 0xFFFF #define L2CAP_DEFAULT_SDU_ITIME 0xFFFFFFFF -- cgit v1.2.3 From 8936fa6d1c202abeb94c51c68897342e8714dd69 Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Mon, 8 Oct 2012 11:14:41 +0300 Subject: Bluetooth: L2CAP: Fix using default Flush Timeout for EFS There are two Flush Timeouts: one is old Flush Timeot Option which is 2 octets and the second is Flush Timeout inside EFS which is 4 octets long. Signed-off-by: Andrei Emeltchenko Signed-off-by: Gustavo Padovan --- include/net/bluetooth/l2cap.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h index 7002f0d656ed..caab98c45121 100644 --- a/include/net/bluetooth/l2cap.h +++ b/include/net/bluetooth/l2cap.h @@ -32,7 +32,8 @@ /* L2CAP defaults */ #define L2CAP_DEFAULT_MTU 672 #define L2CAP_DEFAULT_MIN_MTU 48 -#define L2CAP_DEFAULT_FLUSH_TO 0xffff +#define L2CAP_DEFAULT_FLUSH_TO 0xFFFF +#define L2CAP_EFS_DEFAULT_FLUSH_TO 0xFFFFFFFF #define L2CAP_DEFAULT_TX_WINDOW 63 #define L2CAP_DEFAULT_EXT_WINDOW 0x3FFF #define L2CAP_DEFAULT_MAX_TX 3 -- cgit v1.2.3 From 53502d69be49e3dd5bc95ab0f2deeaea260bd617 Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Wed, 10 Oct 2012 17:38:27 +0300 Subject: Bluetooth: AMP: Handle AMP_LINK timeout When AMP_LINK timeouts execute HCI_OP_DISCONN_PHY_LINK as analog to HCI_OP_DISCONNECT for ACL_LINK. Signed-off-by: Andrei Emeltchenko Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan --- include/net/bluetooth/hci_core.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 90ae4f0a4fdc..dfa108c4abec 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -285,6 +285,8 @@ struct hci_dev { int (*ioctl)(struct hci_dev *hdev, unsigned int cmd, unsigned long arg); }; +#define HCI_PHY_HANDLE(handle) (handle & 0xff) + struct hci_conn { struct list_head list; -- cgit v1.2.3 From 42c4e53e7ac3d4069105e852d1ee24e6ee9e57b8 Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Wed, 10 Oct 2012 17:38:28 +0300 Subject: Bluetooth: AMP: Add handle to hci_chan structure hci_chan will be identified by handle used in logical link creation process. This handle is used in AMP ACL-U packet handle field. Signed-off-by: Andrei Emeltchenko Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan --- include/net/bluetooth/hci_core.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index dfa108c4abec..b697ef342020 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -350,7 +350,7 @@ struct hci_conn { struct hci_chan { struct list_head list; - + __u16 handle; struct hci_conn *conn; struct sk_buff_head data_q; unsigned int sent; @@ -567,6 +567,7 @@ void hci_conn_check_pending(struct hci_dev *hdev); struct hci_chan *hci_chan_create(struct hci_conn *conn); void hci_chan_del(struct hci_chan *chan); void hci_chan_list_flush(struct hci_conn *conn); +struct hci_chan *hci_chan_lookup_handle(struct hci_dev *hdev, __u16 handle); struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 dst_type, __u8 sec_level, __u8 auth_type); -- cgit v1.2.3 From bd1eb66ba4eee21de3be24212b135f57101ad930 Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Wed, 10 Oct 2012 17:38:30 +0300 Subject: Bluetooth: AMP: Handle AMP_LINK connection AMP_LINK represents physical link between AMP controllers. Signed-off-by: Andrei Emeltchenko Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan --- include/net/bluetooth/hci_core.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'include') diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index b697ef342020..d5ed054d77cf 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -73,6 +73,7 @@ struct discovery_state { struct hci_conn_hash { struct list_head list; unsigned int acl_num; + unsigned int amp_num; unsigned int sco_num; unsigned int le_num; }; @@ -449,6 +450,9 @@ static inline void hci_conn_hash_add(struct hci_dev *hdev, struct hci_conn *c) case ACL_LINK: h->acl_num++; break; + case AMP_LINK: + h->amp_num++; + break; case LE_LINK: h->le_num++; break; @@ -470,6 +474,9 @@ static inline void hci_conn_hash_del(struct hci_dev *hdev, struct hci_conn *c) case ACL_LINK: h->acl_num--; break; + case AMP_LINK: + h->amp_num--; + break; case LE_LINK: h->le_num--; break; @@ -486,6 +493,8 @@ static inline unsigned int hci_conn_num(struct hci_dev *hdev, __u8 type) switch (type) { case ACL_LINK: return h->acl_num; + case AMP_LINK: + return h->amp_num; case LE_LINK: return h->le_num; case SCO_LINK: @@ -801,6 +810,10 @@ static inline void hci_proto_disconn_cfm(struct hci_conn *conn, __u8 reason) sco_disconn_cfm(conn, reason); break; + /* L2CAP would be handled for BREDR chan */ + case AMP_LINK: + break; + default: BT_ERR("unknown link type %d", conn->type); break; -- cgit v1.2.3 From 716e4ab5c966327988e21e6137c14e457cfca690 Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Wed, 10 Oct 2012 17:38:31 +0300 Subject: Bluetooth: AMP: Hanlde AMP_LINK case in conn_put Handle AMP link when setting up disconnect timeout. Signed-off-by: Andrei Emeltchenko Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan --- include/net/bluetooth/hci_core.h | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index d5ed054d77cf..9fe8e2dec870 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -605,7 +605,10 @@ static inline void hci_conn_put(struct hci_conn *conn) if (atomic_dec_and_test(&conn->refcnt)) { unsigned long timeo; - if (conn->type == ACL_LINK || conn->type == LE_LINK) { + + switch (conn->type) { + case ACL_LINK: + case LE_LINK: del_timer(&conn->idle_timer); if (conn->state == BT_CONNECTED) { timeo = conn->disc_timeout; @@ -614,12 +617,20 @@ static inline void hci_conn_put(struct hci_conn *conn) } else { timeo = msecs_to_jiffies(10); } - } else { + break; + + case AMP_LINK: + timeo = conn->disc_timeout; + break; + + default: timeo = msecs_to_jiffies(10); + break; } + cancel_delayed_work(&conn->disc_work); queue_delayed_work(conn->hdev->workqueue, - &conn->disc_work, timeo); + &conn->disc_work, timeo); } } -- cgit v1.2.3 From 2dc4e5105f012bda7eef2f459ed3d5299ded9672 Mon Sep 17 00:00:00 2001 From: Gustavo Padovan Date: Fri, 12 Oct 2012 19:35:24 +0800 Subject: Bluetooth: Add chan->ops->defer() When DEFER_SETUP is set defer() will trigger an authorization request to the userspace. l2cap_chan_no_defer() is meant to be used when one does not want to support DEFER_SETUP (A2MP for example). Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan --- include/net/bluetooth/l2cap.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include') diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h index caab98c45121..6e23afdf65c1 100644 --- a/include/net/bluetooth/l2cap.h +++ b/include/net/bluetooth/l2cap.h @@ -541,6 +541,7 @@ struct l2cap_ops { void (*state_change) (struct l2cap_chan *chan, int state); void (*ready) (struct l2cap_chan *chan); + void (*defer) (struct l2cap_chan *chan); struct sk_buff *(*alloc_skb) (struct l2cap_chan *chan, unsigned long len, int nb); }; @@ -748,6 +749,10 @@ static inline void l2cap_chan_no_ready(struct l2cap_chan *chan) { } +static inline void l2cap_chan_no_defer(struct l2cap_chan *chan) +{ +} + extern bool disable_ertm; int l2cap_init_sockets(void); -- cgit v1.2.3 From d73a098804b4d1d254b1caf1d114e5b707dee060 Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Mon, 15 Oct 2012 11:58:40 +0300 Subject: Bluetooth: AMP: Handle complete frames in l2cap Check flags type in switch statement and handle new frame type ACL_COMPLETE used for High Speed data over AMP. Signed-off-by: Andrei Emeltchenko Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan --- include/net/bluetooth/hci.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 77b6a197a6f6..88cbbda61027 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -198,6 +198,7 @@ enum { #define ACL_START_NO_FLUSH 0x00 #define ACL_CONT 0x01 #define ACL_START 0x02 +#define ACL_COMPLETE 0x03 #define ACL_ACTIVE_BCAST 0x04 #define ACL_PICO_BCAST 0x08 -- cgit v1.2.3 From d01a1e658606a0a69100f49c2ef09aacaf74d3e7 Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Tue, 26 Jun 2012 14:37:16 +0200 Subject: mac80211: introduce channel context skeleton code Channel context are the foundation for multi-channel operation. They are are immutable and are re-created (or re-used if other interfaces are bound to a certain channel and a compatible channel type) on channel switching. This is an initial implementation and more features will come in separate patches. Signed-off-by: Michal Kazior [some changes including RCU protection] Signed-off-by: Johannes Berg --- include/net/mac80211.h | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 82558c8decf8..ab1b5bafb568 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -143,6 +143,32 @@ struct ieee80211_low_level_stats { unsigned int dot11RTSSuccessCount; }; +/** + * enum ieee80211_chanctx_change - change flag for channel context + * @IEEE80211_CHANCTX_CHANGE_CHANNEL_TYPE: The channel type was changed + */ +enum ieee80211_chanctx_change { + IEEE80211_CHANCTX_CHANGE_CHANNEL_TYPE = BIT(0), +}; + +/** + * struct ieee80211_chanctx_conf - channel context that vifs may be tuned to + * + * This is the driver-visible part. The ieee80211_chanctx + * that contains it is visible in mac80211 only. + * + * @channel: the channel to tune to + * @channel_type: the channel (HT) type + * @drv_priv: data area for driver use, will always be aligned to + * sizeof(void *), size is determined in hw information. + */ +struct ieee80211_chanctx_conf { + struct ieee80211_channel *channel; + enum nl80211_channel_type channel_type; + + u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *)))); +}; + /** * enum ieee80211_bss_change - BSS change notification flags * @@ -931,6 +957,11 @@ enum ieee80211_vif_flags { * at runtime, mac80211 will never touch this field * @hw_queue: hardware queue for each AC * @cab_queue: content-after-beacon (DTIM beacon really) queue, AP mode only + * @chanctx_conf: The channel context this interface is assigned to, or %NULL + * when it is not assigned. This pointer is RCU-protected due to the TX + * path needing to access it; even though the netdev carrier will always + * be off when it is %NULL there can still be races and packets could be + * processed after it switches back to %NULL. * @drv_priv: data area for driver use, will always be aligned to * sizeof(void *). */ @@ -943,6 +974,8 @@ struct ieee80211_vif { u8 cab_queue; u8 hw_queue[IEEE80211_NUM_ACS]; + struct ieee80211_chanctx_conf __rcu *chanctx_conf; + u32 driver_flags; /* must be last */ @@ -1325,6 +1358,8 @@ enum ieee80211_hw_flags { * within &struct ieee80211_vif. * @sta_data_size: size (in bytes) of the drv_priv data area * within &struct ieee80211_sta. + * @chanctx_data_size: size (in bytes) of the drv_priv data area + * within &struct ieee80211_chanctx_conf. * * @max_rates: maximum number of alternate rate retry stages the hw * can handle. @@ -1369,6 +1404,7 @@ struct ieee80211_hw { int channel_change_time; int vif_data_size; int sta_data_size; + int chanctx_data_size; int napi_weight; u16 queues; u16 max_listen_interval; -- cgit v1.2.3 From c3645eac479d9aaac9f8099c94bf681dc695dd34 Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Tue, 26 Jun 2012 14:37:17 +0200 Subject: mac80211: introduce new ieee80211_ops Introduce channel context driver methods. The channel on a context channel is immutable, but the channel type and other properties can change. Signed-off-by: Michal Kazior Signed-off-by: Johannes Berg --- include/net/mac80211.h | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index ab1b5bafb568..d9d2119f0828 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -2353,6 +2353,16 @@ enum ieee80211_rate_control_changed { * The callback will be called before each transmission and upon return * mac80211 will transmit the frame right away. * The callback is optional and can (should!) sleep. + * + * @add_chanctx: Notifies device driver about new channel context creation. + * @remove_chanctx: Notifies device driver about channel context destruction. + * @change_chanctx: Notifies device driver about channel context changes that + * may happen when combining different virtual interfaces on the same + * channel context with different settings + * @assign_vif_chanctx: Notifies device driver about channel context being bound + * to vif. Possible use is for hw queue remapping. + * @unassign_vif_chanctx: Notifies device driver about channel context being + * unbound from vif. */ struct ieee80211_ops { void (*tx)(struct ieee80211_hw *hw, @@ -2497,6 +2507,20 @@ struct ieee80211_ops { void (*mgd_prepare_tx)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); + + int (*add_chanctx)(struct ieee80211_hw *hw, + struct ieee80211_chanctx_conf *ctx); + void (*remove_chanctx)(struct ieee80211_hw *hw, + struct ieee80211_chanctx_conf *ctx); + void (*change_chanctx)(struct ieee80211_hw *hw, + struct ieee80211_chanctx_conf *ctx, + u32 changed); + int (*assign_vif_chanctx)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_chanctx_conf *ctx); + void (*unassign_vif_chanctx)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_chanctx_conf *ctx); }; /** -- cgit v1.2.3 From 04ecd2578e712c301fa1369d2a8f298a2b4b146a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 11 Sep 2012 14:34:12 +0200 Subject: mac80211: track needed RX chains for channel contexts On each channel that the device is operating on, it may need to listen using one or more chains depending on the SMPS settings of the interfaces using it. The previous channel context changes completely removed this ability (before, it was available as the SMPS mode). Add per-context tracking of the required static and dynamic RX chains and notify the driver on changes. To achieve this, track the chains and SMPS mode used on each virtual interface and update the channel context whenever this changes. Signed-off-by: Johannes Berg --- include/net/mac80211.h | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index d9d2119f0828..3560881d17ee 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -146,9 +146,11 @@ struct ieee80211_low_level_stats { /** * enum ieee80211_chanctx_change - change flag for channel context * @IEEE80211_CHANCTX_CHANGE_CHANNEL_TYPE: The channel type was changed + * @IEEE80211_CHANCTX_CHANGE_RX_CHAINS: The number of RX chains changed */ enum ieee80211_chanctx_change { IEEE80211_CHANCTX_CHANGE_CHANNEL_TYPE = BIT(0), + IEEE80211_CHANCTX_CHANGE_RX_CHAINS = BIT(1), }; /** @@ -159,6 +161,11 @@ enum ieee80211_chanctx_change { * * @channel: the channel to tune to * @channel_type: the channel (HT) type + * @rx_chains_static: The number of RX chains that must always be + * active on the channel to receive MIMO transmissions + * @rx_chains_dynamic: The number of RX chains that must be enabled + * after RTS/CTS handshake to receive SMPS MIMO transmissions; + * this will always be >= @rx_chains_always. * @drv_priv: data area for driver use, will always be aligned to * sizeof(void *), size is determined in hw information. */ @@ -166,6 +173,8 @@ struct ieee80211_chanctx_conf { struct ieee80211_channel *channel; enum nl80211_channel_type channel_type; + u8 rx_chains_static, rx_chains_dynamic; + u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *)))); }; @@ -820,6 +829,8 @@ enum ieee80211_conf_flags { * @IEEE80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed * @IEEE80211_CONF_CHANGE_IDLE: Idle flag changed * @IEEE80211_CONF_CHANGE_SMPS: Spatial multiplexing powersave mode changed + * Note that this is only valid if channel contexts are not used, + * otherwise each channel context has the number of chains listed. */ enum ieee80211_conf_changed { IEEE80211_CONF_CHANGE_SMPS = BIT(1), @@ -885,7 +896,9 @@ enum ieee80211_smps_mode { * * @smps_mode: spatial multiplexing powersave mode; note that * %IEEE80211_SMPS_STATIC is used when the device is not - * configured for an HT channel + * configured for an HT channel. + * Note that this is only valid if channel contexts are not used, + * otherwise each channel context has the number of chains listed. */ struct ieee80211_conf { u32 flags; -- cgit v1.2.3 From 3448c0058327356049f140116fc6632bbfd0c122 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 11 Sep 2012 17:57:42 +0200 Subject: mac80211: add channel context iterator Drivers may need to iterate the active channel contexts, export an iterator function to allow that. To make it possible, use RCU-safe list functions. Signed-off-by: Johannes Berg --- include/net/mac80211.h | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 3560881d17ee..f12df5bb529f 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -3596,6 +3596,27 @@ void ieee80211_iter_keys(struct ieee80211_hw *hw, void *data), void *iter_data); +/** + * ieee80211_iter_chan_contexts_atomic - iterate channel contexts + * @hw: pointre obtained from ieee80211_alloc_hw(). + * @iter: iterator function + * @iter_data: data passed to iterator function + * + * Iterate all active channel contexts. This function is atomic and + * doesn't acquire any locks internally that might be held in other + * places while calling into the driver. + * + * The iterator will not find a context that's being added (during + * the driver callback to add it) but will find it while it's being + * removed. + */ +void ieee80211_iter_chan_contexts_atomic( + struct ieee80211_hw *hw, + void (*iter)(struct ieee80211_hw *hw, + struct ieee80211_chanctx_conf *chanctx_conf, + void *data), + void *iter_data); + /** * ieee80211_ap_probereq_get - retrieve a Probe Request template * @hw: pointer obtained from ieee80211_alloc_hw(). -- cgit v1.2.3 From e39e5b5e7206767a0f1be0e5cb7acbd0db87ae60 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Sun, 30 Sep 2012 19:29:39 +0300 Subject: cfg80211: Allow user space to specify non-IEs to SAE Authentication SAE extends Authentication frames with fields that are not information elements. NL80211_ATTR_IE is not suitable for these, so introduce a new attribute that can be used to specify the fields needed for SAE in station mode. Signed-off-by: Jouni Malinen [change to verify that SAE is only used with authenticate command] Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 5 +++++ include/uapi/linux/nl80211.h | 11 +++++++++++ 2 files changed, 16 insertions(+) (limited to 'include') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 1b4989082244..60cebfac3e3c 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1152,6 +1152,9 @@ const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie); * @key_len: length of WEP key for shared key authentication * @key_idx: index of WEP key for shared key authentication * @key: WEP key for shared key authentication + * @sae_data: Non-IE data to use with SAE or %NULL. This starts with + * Authentication transaction sequence number field. + * @sae_data_len: Length of sae_data buffer in octets */ struct cfg80211_auth_request { struct cfg80211_bss *bss; @@ -1160,6 +1163,8 @@ struct cfg80211_auth_request { enum nl80211_auth_type auth_type; const u8 *key; u8 key_len, key_idx; + const u8 *sae_data; + size_t sae_data_len; }; /** diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 7df9b500c804..179a0c2e2f61 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1273,6 +1273,9 @@ enum nl80211_commands { * the connection request from a station. nl80211_connect_failed_reason * enum has different reasons of connection failure. * + * @NL80211_ATTR_SAE_DATA: SAE elements in Authentication frames. This starts + * with the Authentication transaction sequence number field. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1530,6 +1533,8 @@ enum nl80211_attrs { NL80211_ATTR_CONN_FAILED_REASON, + NL80211_ATTR_SAE_DATA, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -2489,6 +2494,7 @@ enum nl80211_bss_status { * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only) * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r) * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP) + * @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals * @__NL80211_AUTHTYPE_NUM: internal * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by @@ -2500,6 +2506,7 @@ enum nl80211_auth_type { NL80211_AUTHTYPE_SHARED_KEY, NL80211_AUTHTYPE_FT, NL80211_AUTHTYPE_NETWORK_EAP, + NL80211_AUTHTYPE_SAE, /* keep last */ __NL80211_AUTHTYPE_NUM, @@ -3028,6 +3035,9 @@ enum nl80211_ap_sme_features { * in the interface combinations, even when it's only used for scan * and remain-on-channel. This could be due to, for example, the * remain-on-channel implementation requiring a channel context. + * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of + * equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station + * mode */ enum nl80211_feature_flags { NL80211_FEATURE_SK_TX_STATUS = 1 << 0, @@ -3035,6 +3045,7 @@ enum nl80211_feature_flags { NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2, NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3, NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4, + NL80211_FEATURE_SAE = 1 << 5, }; /** -- cgit v1.2.3 From d4950281d72d8845225e3a39dbeb366c40c824c9 Mon Sep 17 00:00:00 2001 From: Mahesh Palivela Date: Wed, 10 Oct 2012 11:25:40 +0000 Subject: ieee80211: Rename VHT cap struct Rename struct ieee80211_vht_capabilities to ieee80211_vht_cap and renamed its member vht_capabilities_info to vht_cap_info. Signed-off-by: Mahesh Palivela Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 45 +++++++++++++++++++++++++++++++-------------- 1 file changed, 31 insertions(+), 14 deletions(-) (limited to 'include') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 2385119f8bb0..8c803f0e4925 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1107,20 +1107,6 @@ struct ieee80211_ht_operation { #define WLAN_HT_SMPS_CONTROL_STATIC 1 #define WLAN_HT_SMPS_CONTROL_DYNAMIC 3 -#define VHT_MCS_SUPPORTED_SET_SIZE 8 - -struct ieee80211_vht_capabilities { - __le32 vht_capabilities_info; - u8 vht_supported_mcs_set[VHT_MCS_SUPPORTED_SET_SIZE]; -} __packed; - -struct ieee80211_vht_operation { - u8 vht_op_info_chwidth; - u8 vht_op_info_chan_center_freq_seg1_idx; - u8 vht_op_info_chan_center_freq_seg2_idx; - __le16 vht_basic_mcs_set; -} __packed; - /** * struct ieee80211_vht_mcs_info - VHT MCS information * @rx_mcs_map: RX MCS map 2 bits for each stream, total 8 streams @@ -1141,6 +1127,37 @@ struct ieee80211_vht_mcs_info { __le16 tx_highest; } __packed; +/** + * struct ieee80211_vht_cap - VHT capabilities + * + * This structure is the "VHT capabilities element" as + * described in 802.11ac D3.0 8.4.2.160 + * @vht_cap_info: VHT capability info + * @supp_mcs: VHT MCS supported rates + */ +struct ieee80211_vht_cap { + __le32 vht_cap_info; + struct ieee80211_vht_mcs_info supp_mcs; +} __packed; + +/** + * struct ieee80211_vht_operation - VHT operation IE + * + * This structure is the "VHT operation element" as + * described in 802.11ac D3.0 8.4.2.161 + * @chan_width: Operating channel width + * @center_freq_seg1_idx: center freq segment 1 index + * @center_freq_seg2_idx: center freq segment 2 index + * @basic_mcs_set: VHT Basic MCS rate set + */ +struct ieee80211_vht_operation { + u8 chan_width; + u8 center_freq_seg1_idx; + u8 center_freq_seg2_idx; + __le16 basic_mcs_set; +} __packed; + + #define IEEE80211_VHT_MCS_ZERO_TO_SEVEN_SUPPORT 0 #define IEEE80211_VHT_MCS_ZERO_TO_EIGHT_SUPPORT 1 #define IEEE80211_VHT_MCS_ZERO_TO_NINE_SUPPORT 2 -- cgit v1.2.3 From 818255ea47709065c53c86ca47fce96d8580bee1 Mon Sep 17 00:00:00 2001 From: Mahesh Palivela Date: Wed, 10 Oct 2012 11:33:04 +0000 Subject: mac80211: VHT peer STA caps Save the AP's VHT capabilities (in managed mode) and make them available to the driver in the station information. Unlike HT capabilities, they aren't restricted to the common capabilities, so drivers must be aware of their own capabilities. Signed-off-by: Mahesh Palivela [fix endian conversion bug ...] Signed-off-by: Johannes Berg --- include/net/mac80211.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index f12df5bb529f..89d5bba28e05 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1122,6 +1122,8 @@ enum ieee80211_sta_state { * @aid: AID we assigned to the station if we're an AP * @supp_rates: Bitmap of supported rates (per band) * @ht_cap: HT capabilities of this STA; restricted to our own TX capabilities + * @vht_cap: VHT capabilities of this STA; Not restricting any capabilities + * of remote STA. Taking as is. * @wme: indicates whether the STA supports WME. Only valid during AP-mode. * @drv_priv: data area for driver use, will always be aligned to * sizeof(void *), size is determined in hw information. @@ -1134,6 +1136,7 @@ struct ieee80211_sta { u8 addr[ETH_ALEN]; u16 aid; struct ieee80211_sta_ht_cap ht_cap; + struct ieee80211_sta_vht_cap vht_cap; bool wme; u8 uapsd_queues; u8 max_sp; -- cgit v1.2.3 From f461be3eff662f01a177ecea8c1d7b040bb6bfbe Mon Sep 17 00:00:00 2001 From: Mahesh Palivela Date: Thu, 11 Oct 2012 08:04:52 +0000 Subject: {nl,cfg}80211: Peer STA VHT caps To save STAs VHT caps in AP mode Signed-off-by: Mahesh Palivela Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 2 ++ include/uapi/linux/nl80211.h | 6 ++++++ 2 files changed, 8 insertions(+) (limited to 'include') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 60cebfac3e3c..607b5c02f740 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -498,6 +498,7 @@ enum station_parameters_apply_mask { * @plink_action: plink action to take * @plink_state: set the peer link state for a station * @ht_capa: HT capabilities of station + * @vht_capa: VHT capabilities of station * @uapsd_queues: bitmap of queues configured for uapsd. same format * as the AC bitmap in the QoS info field * @max_sp: max Service Period. same format as the MAX_SP in the @@ -517,6 +518,7 @@ struct station_parameters { u8 plink_action; u8 plink_state; struct ieee80211_ht_cap *ht_capa; + struct ieee80211_vht_cap *vht_capa; u8 uapsd_queues; u8 max_sp; }; diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 179a0c2e2f61..71ab23b0356d 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1276,6 +1276,9 @@ enum nl80211_commands { * @NL80211_ATTR_SAE_DATA: SAE elements in Authentication frames. This starts * with the Authentication transaction sequence number field. * + * @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from + * association request when used with NL80211_CMD_NEW_STATION) + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1535,6 +1538,8 @@ enum nl80211_attrs { NL80211_ATTR_SAE_DATA, + NL80211_ATTR_VHT_CAPABILITY, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -1578,6 +1583,7 @@ enum nl80211_attrs { #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 #define NL80211_HT_CAPABILITY_LEN 26 +#define NL80211_VHT_CAPABILITY_LEN 12 #define NL80211_MAX_NR_CIPHER_SUITES 5 #define NL80211_MAX_NR_AKM_SUITES 2 -- cgit v1.2.3 From ed47377154310fd2fd59d75fcdeb3d022344fb31 Mon Sep 17 00:00:00 2001 From: Sam Leffler Date: Thu, 11 Oct 2012 21:03:31 -0700 Subject: {nl,cfg}80211: add a flags word to scan requests Add a flags word to direct and scheduled scan requests; it will be used for control of optional behaviours such as flushing the bss cache prior to doing a scan. Signed-off-by: Sam Leffler Tested-by: Amitkumar Karwar Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 4 ++++ include/uapi/linux/nl80211.h | 15 +++++++++++++++ 2 files changed, 19 insertions(+) (limited to 'include') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 607b5c02f740..d95da8f55f6e 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1002,6 +1002,7 @@ struct cfg80211_ssid { * @n_channels: total number of channels to scan * @ie: optional information element(s) to add into Probe Request or %NULL * @ie_len: length of ie in octets + * @flags: bit field of flags controlling operation * @rates: bitmap of rates to advertise for each band * @wiphy: the wiphy this was for * @wdev: the wireless device to scan for @@ -1014,6 +1015,7 @@ struct cfg80211_scan_request { u32 n_channels; const u8 *ie; size_t ie_len; + u32 flags; u32 rates[IEEE80211_NUM_BANDS]; @@ -1046,6 +1048,7 @@ struct cfg80211_match_set { * @interval: interval between each scheduled scan cycle * @ie: optional information element(s) to add into Probe Request or %NULL * @ie_len: length of ie in octets + * @flags: bit field of flags controlling operation * @match_sets: sets of parameters to be matched for a scan result * entry to be considered valid and to be passed to the host * (others are filtered out). @@ -1063,6 +1066,7 @@ struct cfg80211_sched_scan_request { u32 interval; const u8 *ie; size_t ie_len; + u32 flags; struct cfg80211_match_set *match_sets; int n_match_sets; s32 rssi_thold; diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 71ab23b0356d..4d0b49ee4c2c 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1279,6 +1279,8 @@ enum nl80211_commands { * @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from * association request when used with NL80211_CMD_NEW_STATION) * + * @NL80211_ATTR_SCAN_FLAGS: scan request control flags (u32) + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1540,6 +1542,8 @@ enum nl80211_attrs { NL80211_ATTR_VHT_CAPABILITY, + NL80211_ATTR_SCAN_FLAGS, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -3086,4 +3090,15 @@ enum nl80211_connect_failed_reason { NL80211_CONN_FAIL_BLOCKED_CLIENT, }; +/** + * enum nl80211_scan_flags - scan request control flags + * + * Scan request control flags are used to control the handling + * of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN + * requests. + * (will be filled) +enum nl80211_scan_flags { +}; + */ + #endif /* __LINUX_NL80211_H */ -- cgit v1.2.3 From 46856bbf0f0412c12e9674df68822cb531d49327 Mon Sep 17 00:00:00 2001 From: Sam Leffler Date: Thu, 11 Oct 2012 21:03:32 -0700 Subject: cfg80211: add scan flag to indicate its priority Add NL80211_SCAN_FLAG_LOW_PRIORITY flag support. It tells drivers that this is a low priority scan request, so that they can take necessary action. Drivers need to advertise low priority scan capability during registration. Signed-off-by: Sam Leffler Tested-by: Amitkumar Karwar Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 4d0b49ee4c2c..c68e15e41321 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -3048,6 +3048,7 @@ enum nl80211_ap_sme_features { * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of * equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station * mode + * @NL80211_FEATURE_LOW_PRIORITY_SCAN: This driver supports low priority scan */ enum nl80211_feature_flags { NL80211_FEATURE_SK_TX_STATUS = 1 << 0, @@ -3056,6 +3057,7 @@ enum nl80211_feature_flags { NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3, NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4, NL80211_FEATURE_SAE = 1 << 5, + NL80211_FEATURE_LOW_PRIORITY_SCAN = 1 << 6, }; /** @@ -3096,9 +3098,11 @@ enum nl80211_connect_failed_reason { * Scan request control flags are used to control the handling * of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN * requests. - * (will be filled) + * + * @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority + */ enum nl80211_scan_flags { + NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, }; - */ #endif /* __LINUX_NL80211_H */ -- cgit v1.2.3 From 15d6030b4bec618742b8b9ccae9209c8f9e4a916 Mon Sep 17 00:00:00 2001 From: Sam Leffler Date: Thu, 11 Oct 2012 21:03:34 -0700 Subject: cfg80211: add support for flushing old scan results Add an NL80211_SCAN_FLAG_FLUSH flag that causes old bss cache entries to be flushed on scan completion. This is useful for collecting guaranteed fresh scan/survey result (e.g. on resume). For normal scan, flushing only happens on successful completion of a scan; i.e. it does not happen if the scan is aborted. For scheduled scan, previous scan results are flushed everytime when we get new scan results. This feature is enabled by default. Drivers can disable it by unsetting the NL80211_FEATURE_SCAN_FLUSH flag. Signed-off-by: Sam Leffler Tested-by: Amitkumar Karwar Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao [invert polarity of feature flag to account for old kernels] Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 3 +++ include/uapi/linux/nl80211.h | 4 ++++ 2 files changed, 7 insertions(+) (limited to 'include') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index d95da8f55f6e..aa0e4a12308c 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1005,6 +1005,7 @@ struct cfg80211_ssid { * @flags: bit field of flags controlling operation * @rates: bitmap of rates to advertise for each band * @wiphy: the wiphy this was for + * @scan_start: time (in jiffies) when the scan started * @wdev: the wireless device to scan for * @aborted: (internal) scan request was notified as aborted * @no_cck: used to send probe requests at non CCK rate in 2GHz band @@ -1023,6 +1024,7 @@ struct cfg80211_scan_request { /* internal */ struct wiphy *wiphy; + unsigned long scan_start; bool aborted; bool no_cck; @@ -1074,6 +1076,7 @@ struct cfg80211_sched_scan_request { /* internal */ struct wiphy *wiphy; struct net_device *dev; + unsigned long scan_start; /* keep last */ struct ieee80211_channel *channels[0]; diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index c68e15e41321..0e6277a06c29 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -3049,6 +3049,7 @@ enum nl80211_ap_sme_features { * equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station * mode * @NL80211_FEATURE_LOW_PRIORITY_SCAN: This driver supports low priority scan + * @NL80211_FEATURE_SCAN_FLUSH: Scan flush is supported */ enum nl80211_feature_flags { NL80211_FEATURE_SK_TX_STATUS = 1 << 0, @@ -3058,6 +3059,7 @@ enum nl80211_feature_flags { NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4, NL80211_FEATURE_SAE = 1 << 5, NL80211_FEATURE_LOW_PRIORITY_SCAN = 1 << 6, + NL80211_FEATURE_SCAN_FLUSH = 1 << 7, }; /** @@ -3100,9 +3102,11 @@ enum nl80211_connect_failed_reason { * requests. * * @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority + * @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning */ enum nl80211_scan_flags { NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, + NL80211_SCAN_FLAG_FLUSH = 1<<1, }; #endif /* __LINUX_NL80211_H */ -- cgit v1.2.3 From c13a765bd96f4e2f52d218ee6e5c0715380eeeb8 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Fri, 12 Oct 2012 17:35:45 +0530 Subject: mac80211: Notify new IBSS network creation Initialization of beacon transmission in IBSS mode depends on whether a new BSS is being created or joined. When joining an existing IBSS network, beaconing has to start only after a TSF-sync has happened - this is explained in 11.1.4. Introduce a new parameter in the BSS information structure to indicate creator/joiner mode. Signed-off-by: Sujith Manoharan Signed-off-by: Johannes Berg --- include/net/mac80211.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 89d5bba28e05..71c2f9c2f5be 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -258,6 +258,7 @@ enum ieee80211_rssi_event { * @assoc: association status * @ibss_joined: indicates whether this station is part of an IBSS * or not + * @ibss_creator: indicates if a new IBSS network is being created * @aid: association ID number, valid only when @assoc is true * @use_cts_prot: use CTS protection * @use_short_preamble: use 802.11b short preamble; @@ -313,6 +314,7 @@ struct ieee80211_bss_conf { const u8 *bssid; /* association related data */ bool assoc, ibss_joined; + bool ibss_creator; u16 aid; /* erp related data */ bool use_cts_prot; -- cgit v1.2.3 From 3821b4247b40d6b95a59a2895ea6e9bd3f983f04 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Fri, 12 Oct 2012 12:28:16 +0200 Subject: wireless: remove duplicate enum ieee80211_eid definitions WLAN_EID_WPA and WLAN_EID_GENERIC mapped to the same value as WLAN_EID_VENDOR_SPECIFIC. The last one being more in line with the standard specification. Removing WLAN_EID_WPA and WLAN_EID_GENERIC as there are no longer drivers using these. Cc: Johannes Berg Signed-off-by: Arend van Spriel Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 8c803f0e4925..85764a900731 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1457,8 +1457,6 @@ enum ieee80211_eid { WLAN_EID_RSN = 48, WLAN_EID_MMIE = 76, - WLAN_EID_WPA = 221, - WLAN_EID_GENERIC = 221, WLAN_EID_VENDOR_SPECIFIC = 221, WLAN_EID_QOS_PARAMETER = 222, -- cgit v1.2.3 From f706adfeade767d2194c9f39c0f75e944b0bdd23 Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Thu, 18 Oct 2012 13:16:19 +0300 Subject: Bluetooth: AMP: Get amp_mgr reference in HS hci_conn When assigning amp_mgr in hci_conn (type AMP_LINK) get also reference. In hci_conn_del those references would be put for both conn types AMP_LINK and ACL_LINK associated with amp_mgr. Signed-off-by: Andrei Emeltchenko Signed-off-by: Gustavo Padovan --- include/net/bluetooth/a2mp.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/bluetooth/a2mp.h b/include/net/bluetooth/a2mp.h index e776ab2dc572..42f21766c538 100644 --- a/include/net/bluetooth/a2mp.h +++ b/include/net/bluetooth/a2mp.h @@ -133,7 +133,7 @@ struct a2mp_physlink_rsp { extern struct list_head amp_mgr_list; extern struct mutex amp_mgr_list_lock; -void amp_mgr_get(struct amp_mgr *mgr); +struct amp_mgr *amp_mgr_get(struct amp_mgr *mgr); int amp_mgr_put(struct amp_mgr *mgr); u8 __next_ident(struct amp_mgr *mgr); struct l2cap_chan *a2mp_channel_create(struct l2cap_conn *conn, -- cgit v1.2.3 From 5c95b940bd97e744267249e3b0780e6ef04b029c Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Tue, 16 Oct 2012 08:39:22 +0200 Subject: nl/cfg80211: force scan using an AP vif if requested If the user wants to scan using a vif configured as AP, cfg80211 must give him a chance to do it, even if this will disrupt the stations performance due to off-channel scanning. To do so, this patch adds a 'force' flag to the SCAN_TRIGGER command which tells cfg80211 to perform the scanning operation even if the vif is an AP and the beaconing has already started. Signed-off-by: Antonio Quartulli Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 0e6277a06c29..617d0fbfc96f 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -3050,6 +3050,7 @@ enum nl80211_ap_sme_features { * mode * @NL80211_FEATURE_LOW_PRIORITY_SCAN: This driver supports low priority scan * @NL80211_FEATURE_SCAN_FLUSH: Scan flush is supported + * @NL80211_FEATURE_AP_SCAN: Support scanning using an AP vif */ enum nl80211_feature_flags { NL80211_FEATURE_SK_TX_STATUS = 1 << 0, @@ -3060,6 +3061,7 @@ enum nl80211_feature_flags { NL80211_FEATURE_SAE = 1 << 5, NL80211_FEATURE_LOW_PRIORITY_SCAN = 1 << 6, NL80211_FEATURE_SCAN_FLUSH = 1 << 7, + NL80211_FEATURE_AP_SCAN = 1 << 8, }; /** @@ -3103,10 +3105,16 @@ enum nl80211_connect_failed_reason { * * @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority * @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning + * @NL80211_SCAN_FLAG_AP: force a scan even if the interface is configured + * as AP and the beaconing has already been configured. This attribute is + * dangerous because will destroy stations performance as a lot of frames + * will be lost while scanning off-channel, therefore it must be used only + * when really needed */ enum nl80211_scan_flags { NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, NL80211_SCAN_FLAG_FLUSH = 1<<1, + NL80211_SCAN_FLAG_AP = 1<<2, }; #endif /* __LINUX_NL80211_H */ -- cgit v1.2.3 From 49655bb8a51565f0375a4f783334c9de78134be5 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 29 Sep 2012 20:29:49 +0200 Subject: bcma: just do the necessary things in early register on SoCs Some parts of the initialization for chip common and the pcie core are accessing the sprom struct, but it is not initialized at that stage. Just do the necessary thing in the early register on SoCs and not the complete initialization to read out the nvram from the flash chip. After it is possible to read out the nvram, the sprom should be parsed from it and the full initialization of the cores should be run. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- include/linux/bcma/bcma_driver_chipcommon.h | 3 +++ include/linux/bcma/bcma_driver_mips.h | 3 +++ 2 files changed, 6 insertions(+) (limited to 'include') diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index 1cf1749440ac..fbde7cbd2d7d 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -552,6 +552,7 @@ struct bcma_drv_cc { u32 capabilities; u32 capabilities_ext; u8 setup_done:1; + u8 early_setup_done:1; /* Fast Powerup Delay constant */ u16 fast_pwrup_delay; struct bcma_chipcommon_pmu pmu; @@ -583,6 +584,7 @@ struct bcma_drv_cc { bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set)) extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc); +extern void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc); extern void bcma_chipco_suspend(struct bcma_drv_cc *cc); extern void bcma_chipco_resume(struct bcma_drv_cc *cc); @@ -606,6 +608,7 @@ u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value); /* PMU support */ extern void bcma_pmu_init(struct bcma_drv_cc *cc); +extern void bcma_pmu_early_init(struct bcma_drv_cc *cc); extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value); diff --git a/include/linux/bcma/bcma_driver_mips.h b/include/linux/bcma/bcma_driver_mips.h index c0043645cdcb..0baf8a56b794 100644 --- a/include/linux/bcma/bcma_driver_mips.h +++ b/include/linux/bcma/bcma_driver_mips.h @@ -35,13 +35,16 @@ struct bcma_device; struct bcma_drv_mips { struct bcma_device *core; u8 setup_done:1; + u8 early_setup_done:1; unsigned int assigned_irqs; }; #ifdef CONFIG_BCMA_DRIVER_MIPS extern void bcma_core_mips_init(struct bcma_drv_mips *mcore); +extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore); #else static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { } +static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { } #endif extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore); -- cgit v1.2.3 From 360dc31e9cc3f74d0d91a9d19b154c12592f4ffc Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 29 Sep 2012 20:33:49 +0200 Subject: bcma: mark pflash as present when available Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- include/linux/bcma/bcma_driver_chipcommon.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index fbde7cbd2d7d..79993969953a 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -510,6 +510,7 @@ struct bcma_chipcommon_pmu { #ifdef CONFIG_BCMA_DRIVER_MIPS struct bcma_pflash { + bool present; u8 buswidth; u32 window; u32 window_size; -- cgit v1.2.3 From cc787081bcab5a83051c2a936927634d066e7284 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 29 Sep 2012 20:33:50 +0200 Subject: bcma: add and use constants for the flash windows Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- include/linux/bcma/bcma_regs.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/bcma/bcma_regs.h b/include/linux/bcma/bcma_regs.h index 6c9cb93ae3de..7e8104bb7a7e 100644 --- a/include/linux/bcma/bcma_regs.h +++ b/include/linux/bcma/bcma_regs.h @@ -85,6 +85,9 @@ * (2 ZettaBytes), high 32 bits */ -#define BCMA_SFLASH 0x1c000000 +#define BCMA_SOC_FLASH1 0x1fc00000 /* MIPS Flash Region 1 */ +#define BCMA_SOC_FLASH1_SZ 0x00400000 /* MIPS Size of Flash Region 1 */ +#define BCMA_SOC_FLASH2 0x1c000000 /* Flash Region 2 (region 1 shadowed here) */ +#define BCMA_SOC_FLASH2_SZ 0x02000000 /* Size of Flash Region 2 */ #endif /* LINUX_BCMA_REGS_H_ */ -- cgit v1.2.3 From e661b75a44cc811426ea005c3cb858e45bd73d57 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 29 Sep 2012 20:33:51 +0200 Subject: bcma: mark nflash if it is the boot flash There are some devices which are able to boot from nand flash and other are using a serial flash for booting. Add a bool to indicate that the device is booted from that flash chip and not from some other chip also connected to the SoC. This is needed to find the nvram, as it is stored on the flash the devices booted from. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- include/linux/bcma/bcma_driver_chipcommon.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index 79993969953a..145f3c56227f 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -533,6 +533,7 @@ struct mtd_info; struct bcma_nflash { bool present; + bool boot; /* This is the flash the SoC boots from */ struct mtd_info *mtd; }; -- cgit v1.2.3 From 54c974984e8840c9e20390ce16e3d9f4ea674499 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 29 Sep 2012 20:36:17 +0200 Subject: ssb: move parallel flash config into an own struct This is a preparing step for adding serial flash support. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- include/linux/ssb/ssb_driver_mips.h | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/ssb/ssb_driver_mips.h b/include/linux/ssb/ssb_driver_mips.h index 5f44e9740cd2..5d057db53071 100644 --- a/include/linux/ssb/ssb_driver_mips.h +++ b/include/linux/ssb/ssb_driver_mips.h @@ -13,6 +13,11 @@ struct ssb_serial_port { unsigned int reg_shift; }; +struct ssb_pflash { + u8 buswidth; + u32 window; + u32 window_size; +}; struct ssb_mipscore { struct ssb_device *dev; @@ -20,9 +25,7 @@ struct ssb_mipscore { int nr_serial_ports; struct ssb_serial_port serial_ports[4]; - u8 flash_buswidth; - u32 flash_window; - u32 flash_window_size; + struct ssb_pflash pflash; }; extern void ssb_mipscore_init(struct ssb_mipscore *mcore); -- cgit v1.2.3 From d954162c54ea81cee12acec1ee5fa19214d0de96 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 29 Sep 2012 20:36:18 +0200 Subject: ssb: add attribute to indicate a parallel flash is available Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- include/linux/ssb/ssb_driver_mips.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/ssb/ssb_driver_mips.h b/include/linux/ssb/ssb_driver_mips.h index 5d057db53071..07a9c7a2e088 100644 --- a/include/linux/ssb/ssb_driver_mips.h +++ b/include/linux/ssb/ssb_driver_mips.h @@ -14,6 +14,7 @@ struct ssb_serial_port { }; struct ssb_pflash { + bool present; u8 buswidth; u32 window; u32 window_size; -- cgit v1.2.3 From dfae714361ba75323914da19eb411aaae53d6af0 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 29 Sep 2012 20:40:18 +0200 Subject: bcma: add an extra pcie core struct The BCM4706 has two PCIe host controller on the bcma bus. For PCIe client mode it is assumed that there is only one PCIe controller so the PCIe driver, like b43 and brcmsmac are accessing the first PCIe controller when they want to issue a operation on the host controller. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- include/linux/bcma/bcma.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index 4180eb78d575..fd15d9829705 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -251,7 +251,7 @@ struct bcma_bus { u8 num; struct bcma_drv_cc drv_cc; - struct bcma_drv_pci drv_pci; + struct bcma_drv_pci drv_pci[2]; struct bcma_drv_mips drv_mips; struct bcma_drv_gmac_cmn drv_gmac_cmn; -- cgit v1.2.3 From 5d0d04e477c44993f995f35b728ce9dd57a4615e Mon Sep 17 00:00:00 2001 From: Assaf Krauss Date: Wed, 1 Aug 2012 15:12:48 +0300 Subject: mac80211: expose AES-CMAC subkey calculation Expose a function for the AES-CMAC subkey calculation to drivers. This is the first step of the AES-CMAC cipher key setup and may be required for CMAC hardware offloading. Signed-off-by: Assaf Krauss Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- include/net/mac80211.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 71c2f9c2f5be..00b7204708bd 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -3222,6 +3222,19 @@ void ieee80211_get_tkip_rx_p1k(struct ieee80211_key_conf *keyconf, void ieee80211_get_tkip_p2k(struct ieee80211_key_conf *keyconf, struct sk_buff *skb, u8 *p2k); +/** + * ieee80211_aes_cmac_calculate_k1_k2 - calculate the AES-CMAC sub keys + * + * This function computes the two AES-CMAC sub-keys, based on the + * previously installed master key. + * + * @keyconf: the parameter passed with the set key + * @k1: a buffer to be filled with the 1st sub-key + * @k2: a buffer to be filled with the 2nd sub-key + */ +void ieee80211_aes_cmac_calculate_k1_k2(struct ieee80211_key_conf *keyconf, + u8 *k1, u8 *k2); + /** * struct ieee80211_key_seq - key sequence counter * -- cgit v1.2.3 From 7e2afc9d072b9f84b314b208a125c2b1ce36b685 Mon Sep 17 00:00:00 2001 From: Arron Wang Date: Thu, 27 Sep 2012 17:32:54 +0800 Subject: NFC: Set local gb and DEP registries Set the local general bytes and default value for NFCIP1 Target/Initiator registries if the protocol is NFC-DEP Signed-off-by: Arron Wang Signed-off-by: Samuel Ortiz --- include/net/nfc/hci.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/net/nfc/hci.h b/include/net/nfc/hci.h index e900072950cb..df6523dcd3c8 100644 --- a/include/net/nfc/hci.h +++ b/include/net/nfc/hci.h @@ -114,6 +114,9 @@ struct nfc_hci_dev { int async_cb_type; data_exchange_cb_t async_cb; void *async_cb_context; + + u8 *gb; + size_t gb_len; }; /* hci device allocation */ -- cgit v1.2.3 From f7a5f6c532f33ba66a7ca19e81ed447a83dab2db Mon Sep 17 00:00:00 2001 From: Arron Wang Date: Thu, 27 Sep 2012 17:32:55 +0800 Subject: NFC: Pass hardware specific HCI event to driver Signed-off-by: Arron Wang Signed-off-by: Samuel Ortiz --- include/net/nfc/hci.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/net/nfc/hci.h b/include/net/nfc/hci.h index df6523dcd3c8..490d323a9ec3 100644 --- a/include/net/nfc/hci.h +++ b/include/net/nfc/hci.h @@ -47,6 +47,8 @@ struct nfc_hci_ops { data_exchange_cb_t cb, void *cb_context); int (*check_presence)(struct nfc_hci_dev *hdev, struct nfc_target *target); + void (*event_received)(struct nfc_hci_dev *hdev, u8 gate, u8 event, + struct sk_buff *skb); }; /* Pipes */ @@ -222,5 +224,6 @@ int nfc_hci_send_response(struct nfc_hci_dev *hdev, u8 gate, u8 response, const u8 *param, size_t param_len); int nfc_hci_send_event(struct nfc_hci_dev *hdev, u8 gate, u8 event, const u8 *param, size_t param_len); +int nfc_hci_target_discovered(struct nfc_hci_dev *hdev, u8 gate); #endif /* __NET_HCI_H */ -- cgit v1.2.3 From c40d17401f89f575a6ff5774abaa0838398b820c Mon Sep 17 00:00:00 2001 From: Arron Wang Date: Thu, 27 Sep 2012 17:32:57 +0800 Subject: NFC: Implement HCI DEP link up and down And implement the corresponding hooks for pn544. Signed-off-by: Arron Wang Signed-off-by: Samuel Ortiz --- include/net/nfc/hci.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/net/nfc/hci.h b/include/net/nfc/hci.h index 490d323a9ec3..6b2d75dc7c01 100644 --- a/include/net/nfc/hci.h +++ b/include/net/nfc/hci.h @@ -38,6 +38,9 @@ struct nfc_hci_ops { int (*xmit) (struct nfc_hci_dev *hdev, struct sk_buff *skb); int (*start_poll) (struct nfc_hci_dev *hdev, u32 im_protocols, u32 tm_protocols); + int (*dep_link_up)(struct nfc_hci_dev *hdev, struct nfc_target *target, + u8 comm_mode, u8 *gb, size_t gb_len); + int (*dep_link_down)(struct nfc_hci_dev *hdev); int (*target_from_gate) (struct nfc_hci_dev *hdev, u8 gate, struct nfc_target *target); int (*complete_target_discovered) (struct nfc_hci_dev *hdev, u8 gate, -- cgit v1.2.3 From e81076235b46189a776362ec5e4c6626bf1599ff Mon Sep 17 00:00:00 2001 From: Arron Wang Date: Thu, 27 Sep 2012 17:32:58 +0800 Subject: NFC: Implement HCI DEP send and receive data And implement the corresponding hooks for pn544. Signed-off-by: Arron Wang Signed-off-by: Samuel Ortiz --- include/net/nfc/hci.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/nfc/hci.h b/include/net/nfc/hci.h index 6b2d75dc7c01..bc87b8f2d692 100644 --- a/include/net/nfc/hci.h +++ b/include/net/nfc/hci.h @@ -45,9 +45,10 @@ struct nfc_hci_ops { struct nfc_target *target); int (*complete_target_discovered) (struct nfc_hci_dev *hdev, u8 gate, struct nfc_target *target); - int (*data_exchange) (struct nfc_hci_dev *hdev, + int (*im_transceive) (struct nfc_hci_dev *hdev, struct nfc_target *target, struct sk_buff *skb, data_exchange_cb_t cb, void *cb_context); + int (*tm_send)(struct nfc_hci_dev *hdev, struct sk_buff *skb); int (*check_presence)(struct nfc_hci_dev *hdev, struct nfc_target *target); void (*event_received)(struct nfc_hci_dev *hdev, u8 gate, u8 event, -- cgit v1.2.3 From 97f18414af395c547f20300e5d4c81d7190a4155 Mon Sep 17 00:00:00 2001 From: Eric Lapuyade Date: Tue, 2 Oct 2012 18:44:06 +0200 Subject: NFC: Separate pn544 hci driver in HW dependant and independant parts The driver now has all HCI stuff isolated in one file, and all the hardware link specifics in another. Writing a pn544 driver on top of another hardware link is now just a matter of adding a new file for that new hardware specifics. Signed-off-by: Eric Lapuyade Signed-off-by: Samuel Ortiz --- include/net/nfc/hci.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include') diff --git a/include/net/nfc/hci.h b/include/net/nfc/hci.h index bc87b8f2d692..639f50af42df 100644 --- a/include/net/nfc/hci.h +++ b/include/net/nfc/hci.h @@ -24,6 +24,12 @@ #include +struct nfc_phy_ops { + int (*write)(void *dev_id, struct sk_buff *skb); + int (*enable)(void *dev_id); + void (*disable)(void *dev_id); +}; + struct nfc_hci_dev; struct nfc_hci_ops { -- cgit v1.2.3 From 7eda8b8e967781cfa5a04962502f9aa428f67e5f Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Mon, 22 Oct 2012 15:57:58 +0200 Subject: NFC: Use IDR library to assing NFC devices IDs As a consequence the NFC device IDs won't be increasing all the time, as IDR provides the first available ID. Signed-off-by: Samuel Ortiz --- include/net/nfc/nfc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/nfc/nfc.h b/include/net/nfc/nfc.h index f05b10682c9d..fce80b2f9be7 100644 --- a/include/net/nfc/nfc.h +++ b/include/net/nfc/nfc.h @@ -95,7 +95,7 @@ struct nfc_genl_data { }; struct nfc_dev { - unsigned int idx; + int idx; u32 target_next_idx; struct nfc_target *targets; int n_targets; -- cgit v1.2.3 From 52feb444a90304eb13c03115bb9758101dbb9254 Mon Sep 17 00:00:00 2001 From: Thierry Escande Date: Wed, 17 Oct 2012 14:43:39 +0200 Subject: NFC: Extend netlink interface for LTO, RW, and MIUX parameters support NFC_CMD_LLC_GET_PARAMS: request LTO, RW, and MIUX parameters for a device NFC_CMD_LLC_SET_PARAMS: set one or more of LTO, RW, and MIUX parameters for a device. LTO must be set before the link is up otherwise -EINPROGRESS is returned. RW and MIUX can be set at anytime and will be passed in subsequent CONNECT and CC messages. If one of the passed parameters is wrong none is set and -EINVAL is returned. Signed-off-by: Thierry Escande Signed-off-by: Samuel Ortiz --- include/uapi/linux/nfc.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'include') diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h index d908d17da56d..0e63cee8d810 100644 --- a/include/uapi/linux/nfc.h +++ b/include/uapi/linux/nfc.h @@ -60,6 +60,13 @@ * target mode. * @NFC_EVENT_DEVICE_DEACTIVATED: event emitted when the adapter is deactivated * from target mode. + * @NFC_CMD_LLC_GET_PARAMS: request LTO, RW, and MIUX parameters for a device + * @NFC_CMD_LLC_SET_PARAMS: set one or more of LTO, RW, and MIUX parameters for + * a device. LTO must be set before the link is up otherwise -EINPROGRESS + * is returned. RW and MIUX can be set at anytime and will be passed in + * subsequent CONNECT and CC messages. + * If one of the passed parameters is wrong none is set and -EINVAL is + * returned. */ enum nfc_commands { NFC_CMD_UNSPEC, @@ -77,6 +84,8 @@ enum nfc_commands { NFC_EVENT_TARGET_LOST, NFC_EVENT_TM_ACTIVATED, NFC_EVENT_TM_DEACTIVATED, + NFC_CMD_LLC_GET_PARAMS, + NFC_CMD_LLC_SET_PARAMS, /* private: internal use only */ __NFC_CMD_AFTER_LAST }; @@ -102,6 +111,9 @@ enum nfc_commands { * @NFC_ATTR_RF_MODE: Initiator or target * @NFC_ATTR_IM_PROTOCOLS: Initiator mode protocols to poll for * @NFC_ATTR_TM_PROTOCOLS: Target mode protocols to listen for + * @NFC_ATTR_LLC_PARAM_LTO: Link TimeOut parameter + * @NFC_ATTR_LLC_PARAM_RW: Receive Window size parameter + * @NFC_ATTR_LLC_PARAM_MIUX: MIU eXtension parameter */ enum nfc_attrs { NFC_ATTR_UNSPEC, @@ -119,6 +131,9 @@ enum nfc_attrs { NFC_ATTR_DEVICE_POWERED, NFC_ATTR_IM_PROTOCOLS, NFC_ATTR_TM_PROTOCOLS, + NFC_ATTR_LLC_PARAM_LTO, + NFC_ATTR_LLC_PARAM_RW, + NFC_ATTR_LLC_PARAM_MIUX, /* private: internal use only */ __NFC_ATTR_AFTER_LAST }; -- cgit v1.2.3