From 774b514390b1eb8476bc759262790762bd1ef45a Mon Sep 17 00:00:00 2001 From: Maxime COQUELIN Date: Wed, 29 Jan 2014 17:24:07 +0100 Subject: clk: divider: Add round to closest divider In some cases, we want to be able to round the divider to the closest one, instead than rounding up. This patch adds a new CLK_DIVIDER_ROUND_CLOSEST flag to specify the divider has to round to closest div, keeping rounding up as de default behaviour. Signed-off-by: Maxime Coquelin Signed-off-by: Mike Turquette --- include/linux/clk-provider.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 511917416fb0..59e2eb58f555 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -312,6 +312,8 @@ struct clk_div_table { * of this register, and mask of divider bits are in higher 16-bit of this * register. While setting the divider bits, higher 16-bit should also be * updated to indicate changing divider bits. + * CLK_DIVIDER_ROUND_CLOSEST - Makes the best calculated divider to be rounded + * to the closest integer instead of the up one. */ struct clk_divider { struct clk_hw hw; @@ -327,6 +329,7 @@ struct clk_divider { #define CLK_DIVIDER_POWER_OF_TWO BIT(1) #define CLK_DIVIDER_ALLOW_ZERO BIT(2) #define CLK_DIVIDER_HIWORD_MASK BIT(3) +#define CLK_DIVIDER_ROUND_CLOSEST BIT(4) extern const struct clk_ops clk_divider_ops; struct clk *clk_register_divider(struct device *dev, const char *name, -- cgit v1.2.3 From 0bdab78ba69f057c99e72b9887a997888e7fce15 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 21 Apr 2014 16:26:23 -0500 Subject: clk: bcm281xx: move compatible string definitions The Broadcom 281xx clock code uses a #define for the compatible string for it's clock control units (CCUs). Rather than defining those in the C source file, define them in the header file that's shared by both the code and the device tree source file (along with all the clock ids). Signed-off-by: Alex Elder Signed-off-by: Mike Turquette --- include/dt-bindings/clock/bcm281xx.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include') diff --git a/include/dt-bindings/clock/bcm281xx.h b/include/dt-bindings/clock/bcm281xx.h index e0096940886d..a763460cf1af 100644 --- a/include/dt-bindings/clock/bcm281xx.h +++ b/include/dt-bindings/clock/bcm281xx.h @@ -20,6 +20,18 @@ * the clock control units (CCUs) on Broadcom BCM281XX family SoCs. */ +/* + * These are the bcm281xx CCU device tree "compatible" strings. + * We're stuck with using "bcm11351" in the string because wild + * cards aren't allowed, and that name was the first one defined + * in this family of devices. + */ +#define BCM281XX_DT_ROOT_CCU_COMPAT "brcm,bcm11351-root-ccu" +#define BCM281XX_DT_AON_CCU_COMPAT "brcm,bcm11351-aon-ccu" +#define BCM281XX_DT_HUB_CCU_COMPAT "brcm,bcm11351-hub-ccu" +#define BCM281XX_DT_MASTER_CCU_COMPAT "brcm,bcm11351-master-ccu" +#define BCM281XX_DT_SLAVE_CCU_COMPAT "brcm,bcm11351-slave-ccu" + /* root CCU clock ids */ #define BCM281XX_ROOT_CCU_FRAC_1M 0 -- cgit v1.2.3 From 7d3723ba8c19a9d23a240f8e99010193e5623b06 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Mon, 21 Apr 2014 16:26:26 -0500 Subject: clk: bcm21664: use common clock framework Define the set of CCUs and provided clocks sufficient to satisfy the needs of all the existing clock references for BCM21664. Replace the "fake" fixed-rate clocks used previously with "real" ones. Note that only the minimal set of these clocks and CCUs is defined here. More clock definitions will need to be added as required by the addition of additional drivers. Signed-off-by: Alex Elder Signed-off-by: Mike Turquette --- include/dt-bindings/clock/bcm21664.h | 62 ++++++++++++++++++++++++++++++++++++ 1 file changed, 62 insertions(+) create mode 100644 include/dt-bindings/clock/bcm21664.h (limited to 'include') diff --git a/include/dt-bindings/clock/bcm21664.h b/include/dt-bindings/clock/bcm21664.h new file mode 100644 index 000000000000..5a7f0e4750a8 --- /dev/null +++ b/include/dt-bindings/clock/bcm21664.h @@ -0,0 +1,62 @@ +/* + * Copyright (C) 2013 Broadcom Corporation + * Copyright 2013 Linaro Limited + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _CLOCK_BCM21664_H +#define _CLOCK_BCM21664_H + +/* + * This file defines the values used to specify clocks provided by + * the clock control units (CCUs) on Broadcom BCM21664 family SoCs. + */ + +/* bcm21664 CCU device tree "compatible" strings */ +#define BCM21664_DT_ROOT_CCU_COMPAT "brcm,bcm21664-root-ccu" +#define BCM21664_DT_AON_CCU_COMPAT "brcm,bcm21664-aon-ccu" +#define BCM21664_DT_MASTER_CCU_COMPAT "brcm,bcm21664-master-ccu" +#define BCM21664_DT_SLAVE_CCU_COMPAT "brcm,bcm21664-slave-ccu" + +/* root CCU clock ids */ + +#define BCM21664_ROOT_CCU_FRAC_1M 0 +#define BCM21664_ROOT_CCU_CLOCK_COUNT 1 + +/* aon CCU clock ids */ + +#define BCM21664_AON_CCU_HUB_TIMER 0 +#define BCM21664_AON_CCU_CLOCK_COUNT 1 + +/* master CCU clock ids */ + +#define BCM21664_MASTER_CCU_SDIO1 0 +#define BCM21664_MASTER_CCU_SDIO2 1 +#define BCM21664_MASTER_CCU_SDIO3 2 +#define BCM21664_MASTER_CCU_SDIO4 3 +#define BCM21664_MASTER_CCU_SDIO1_SLEEP 4 +#define BCM21664_MASTER_CCU_SDIO2_SLEEP 5 +#define BCM21664_MASTER_CCU_SDIO3_SLEEP 6 +#define BCM21664_MASTER_CCU_SDIO4_SLEEP 7 +#define BCM21664_MASTER_CCU_CLOCK_COUNT 8 + +/* slave CCU clock ids */ + +#define BCM21664_SLAVE_CCU_UARTB 0 +#define BCM21664_SLAVE_CCU_UARTB2 1 +#define BCM21664_SLAVE_CCU_UARTB3 2 +#define BCM21664_SLAVE_CCU_BSC1 3 +#define BCM21664_SLAVE_CCU_BSC2 4 +#define BCM21664_SLAVE_CCU_BSC3 5 +#define BCM21664_SLAVE_CCU_BSC4 6 +#define BCM21664_SLAVE_CCU_CLOCK_COUNT 7 + +#endif /* _CLOCK_BCM21664_H */ -- cgit v1.2.3 From 2c07e3c7dd487fa40983aa20704b2755c9aac477 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 4 Apr 2014 11:32:56 -0500 Subject: clk: qcom: Various fixes for MSM8960's global clock controller * Remove CE2_SLEEP_CLK, doesn't exist on 8960 family SoCs * Fix incorrect offset for PMIC_SSBI2_RESET * Fix typo: SIC_TIC -> SPS_TIC_H SFAB_ADM0_M2_A_CLK -> SFAB_ADM0_M2_H_CLK * Fix naming convention: SFAB_CFPB_S_HCLK -> SFAB_CFPB_S_H_CLK SATA_SRC_CLK -> SATA_CLK_SRC Signed-off-by: Kumar Gala Reviewed-by: Stephen Boyd Signed-off-by: Mike Turquette --- include/dt-bindings/clock/qcom,gcc-msm8960.h | 7 +++---- include/dt-bindings/reset/qcom,gcc-msm8960.h | 2 +- 2 files changed, 4 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/dt-bindings/clock/qcom,gcc-msm8960.h b/include/dt-bindings/clock/qcom,gcc-msm8960.h index 03bbf49d43b7..f9f547146a15 100644 --- a/include/dt-bindings/clock/qcom,gcc-msm8960.h +++ b/include/dt-bindings/clock/qcom,gcc-msm8960.h @@ -51,7 +51,7 @@ #define QDSS_TSCTR_CLK 34 #define SFAB_ADM0_M0_A_CLK 35 #define SFAB_ADM0_M1_A_CLK 36 -#define SFAB_ADM0_M2_A_CLK 37 +#define SFAB_ADM0_M2_H_CLK 37 #define ADM0_CLK 38 #define ADM0_PBUS_CLK 39 #define MSS_XPU_CLK 40 @@ -99,7 +99,7 @@ #define CFPB2_H_CLK 82 #define SFAB_CFPB_M_H_CLK 83 #define CFPB_MASTER_H_CLK 84 -#define SFAB_CFPB_S_HCLK 85 +#define SFAB_CFPB_S_H_CLK 85 #define CFPB_SPLITTER_H_CLK 86 #define TSIF_H_CLK 87 #define TSIF_INACTIVITY_TIMERS_CLK 88 @@ -110,7 +110,6 @@ #define CE1_SLEEP_CLK 93 #define CE2_H_CLK 94 #define CE2_CORE_CLK 95 -#define CE2_SLEEP_CLK 96 #define SFPB_H_CLK_SRC 97 #define SFPB_H_CLK 98 #define SFAB_SFPB_M_H_CLK 99 @@ -252,7 +251,7 @@ #define MSS_S_H_CLK 235 #define MSS_CXO_SRC_CLK 236 #define SATA_H_CLK 237 -#define SATA_SRC_CLK 238 +#define SATA_CLK_SRC 238 #define SATA_RXOOB_CLK 239 #define SATA_PMALIVE_CLK 240 #define SATA_PHY_REF_CLK 241 diff --git a/include/dt-bindings/reset/qcom,gcc-msm8960.h b/include/dt-bindings/reset/qcom,gcc-msm8960.h index a840e680323c..07edd0e65eed 100644 --- a/include/dt-bindings/reset/qcom,gcc-msm8960.h +++ b/include/dt-bindings/reset/qcom,gcc-msm8960.h @@ -58,7 +58,7 @@ #define PPSS_PROC_RESET 41 #define PPSS_RESET 42 #define DMA_BAM_RESET 43 -#define SIC_TIC_RESET 44 +#define SPS_TIC_H_RESET 44 #define SLIMBUS_H_RESET 45 #define SFAB_CFPB_M_RESET 46 #define SFAB_CFPB_S_RESET 47 -- cgit v1.2.3 From 95713978b0a2929b72933235bb07c0a793e71afa Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Emilio=20L=C3=B3pez?= Date: Fri, 2 May 2014 17:57:16 +0200 Subject: clk: sunxi: Implement MMC phase control MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit HdG: add header exporting clk_sunxi_mmc_phase_control Signed-off-by: Emilio López Signed-off-by: Hans de Goede Signed-off-by: Mike Turquette --- include/linux/clk/sunxi.h | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 include/linux/clk/sunxi.h (limited to 'include') diff --git a/include/linux/clk/sunxi.h b/include/linux/clk/sunxi.h new file mode 100644 index 000000000000..1ef5c899e458 --- /dev/null +++ b/include/linux/clk/sunxi.h @@ -0,0 +1,22 @@ +/* + * Copyright 2013 - Hans de Goede + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_CLK_SUNXI_H_ +#define __LINUX_CLK_SUNXI_H_ + +#include + +void clk_sunxi_mmc_phase_control(struct clk_hw *hw, u8 sample, u8 output); + +#endif -- cgit v1.2.3 From 5efaf09021a5817e5a274aa2d2fad8d92d12ed92 Mon Sep 17 00:00:00 2001 From: Zhangfei Gao Date: Mon, 21 Apr 2014 12:07:27 +0800 Subject: clk: hisi: add clk-hix5hd2.c Signed-off-by: Haifeng Yan Signed-off-by: Zhangfei Gao Signed-off-by: Haojian Zhuang --- include/dt-bindings/clock/hix5hd2-clock.h | 58 +++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+) create mode 100644 include/dt-bindings/clock/hix5hd2-clock.h (limited to 'include') diff --git a/include/dt-bindings/clock/hix5hd2-clock.h b/include/dt-bindings/clock/hix5hd2-clock.h new file mode 100644 index 000000000000..aad579a75802 --- /dev/null +++ b/include/dt-bindings/clock/hix5hd2-clock.h @@ -0,0 +1,58 @@ +/* + * Copyright (c) 2014 Linaro Ltd. + * Copyright (c) 2014 Hisilicon Limited. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ + +#ifndef __DTS_HIX5HD2_CLOCK_H +#define __DTS_HIX5HD2_CLOCK_H + +/* fixed rate */ +#define HIX5HD2_FIXED_1200M 1 +#define HIX5HD2_FIXED_400M 2 +#define HIX5HD2_FIXED_48M 3 +#define HIX5HD2_FIXED_24M 4 +#define HIX5HD2_FIXED_600M 5 +#define HIX5HD2_FIXED_300M 6 +#define HIX5HD2_FIXED_75M 7 +#define HIX5HD2_FIXED_200M 8 +#define HIX5HD2_FIXED_100M 9 +#define HIX5HD2_FIXED_40M 10 +#define HIX5HD2_FIXED_150M 11 +#define HIX5HD2_FIXED_1728M 12 +#define HIX5HD2_FIXED_28P8M 13 +#define HIX5HD2_FIXED_432M 14 +#define HIX5HD2_FIXED_345P6M 15 +#define HIX5HD2_FIXED_288M 16 +#define HIX5HD2_FIXED_60M 17 +#define HIX5HD2_FIXED_750M 18 +#define HIX5HD2_FIXED_500M 19 +#define HIX5HD2_FIXED_54M 20 +#define HIX5HD2_FIXED_27M 21 +#define HIX5HD2_FIXED_1500M 22 +#define HIX5HD2_FIXED_375M 23 +#define HIX5HD2_FIXED_187M 24 +#define HIX5HD2_FIXED_250M 25 +#define HIX5HD2_FIXED_125M 26 +#define HIX5HD2_FIXED_2P02M 27 +#define HIX5HD2_FIXED_50M 28 +#define HIX5HD2_FIXED_25M 29 +#define HIX5HD2_FIXED_83M 30 + +/* mux clocks */ +#define HIX5HD2_SFC_MUX 64 +#define HIX5HD2_MMC_MUX 65 +#define HIX5HD2_FEPHY_MUX 66 + +/* gate clocks */ +#define HIX5HD2_SFC_RST 128 +#define HIX5HD2_SFC_CLK 129 +#define HIX5HD2_MMC_CIU_CLK 130 +#define HIX5HD2_MMC_BIU_CLK 131 +#define HIX5HD2_MMC_CIU_RST 132 + +#define HIX5HD2_NR_CLKS 256 +#endif /* __DTS_HIX5HD2_CLOCK_H */ -- cgit v1.2.3 From 725b418b43d2ddcb94b413cd25c74c1175d1c5f0 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 22 Apr 2014 15:11:41 +0200 Subject: clk: Fixup spacing in comments - Remove spaces in front of TABs, - Correct indentation for some CLK_* flag descriptions. Signed-off-by: Geert Uytterhoeven Signed-off-by: Mike Turquette --- include/linux/clk-provider.h | 88 ++++++++++++++++++++++---------------------- 1 file changed, 44 insertions(+), 44 deletions(-) (limited to 'include') diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 59e2eb58f555..397f98505bd4 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -40,14 +40,14 @@ struct dentry; * through the clk_* api. * * @prepare: Prepare the clock for enabling. This must not return until - * the clock is fully prepared, and it's safe to call clk_enable. - * This callback is intended to allow clock implementations to - * do any initialisation that may sleep. Called with - * prepare_lock held. + * the clock is fully prepared, and it's safe to call clk_enable. + * This callback is intended to allow clock implementations to + * do any initialisation that may sleep. Called with + * prepare_lock held. * * @unprepare: Release the clock from its prepared state. This will typically - * undo any work done in the @prepare callback. Called with - * prepare_lock held. + * undo any work done in the @prepare callback. Called with + * prepare_lock held. * * @is_prepared: Queries the hardware to determine if the clock is prepared. * This function is allowed to sleep. Optional, if this op is not @@ -58,16 +58,16 @@ struct dentry; * Called with prepare mutex held. This function may sleep. * * @enable: Enable the clock atomically. This must not return until the - * clock is generating a valid clock signal, usable by consumer - * devices. Called with enable_lock held. This function must not - * sleep. + * clock is generating a valid clock signal, usable by consumer + * devices. Called with enable_lock held. This function must not + * sleep. * * @disable: Disable the clock atomically. Called with enable_lock held. - * This function must not sleep. + * This function must not sleep. * * @is_enabled: Queries the hardware to determine if the clock is enabled. - * This function must not sleep. Optional, if this op is not - * set then the enable count will be used. + * This function must not sleep. Optional, if this op is not + * set then the enable count will be used. * * @disable_unused: Disable the clock atomically. Only called from * clk_disable_unused for gate clocks with special needs. @@ -75,34 +75,34 @@ struct dentry; * sleep. * * @recalc_rate Recalculate the rate of this clock, by querying hardware. The - * parent rate is an input parameter. It is up to the caller to - * ensure that the prepare_mutex is held across this call. - * Returns the calculated rate. Optional, but recommended - if - * this op is not set then clock rate will be initialized to 0. + * parent rate is an input parameter. It is up to the caller to + * ensure that the prepare_mutex is held across this call. + * Returns the calculated rate. Optional, but recommended - if + * this op is not set then clock rate will be initialized to 0. * * @round_rate: Given a target rate as input, returns the closest rate actually - * supported by the clock. + * supported by the clock. * * @determine_rate: Given a target rate as input, returns the closest rate * actually supported by the clock, and optionally the parent clock * that should be used to provide the clock rate. * * @get_parent: Queries the hardware to determine the parent of a clock. The - * return value is a u8 which specifies the index corresponding to - * the parent clock. This index can be applied to either the - * .parent_names or .parents arrays. In short, this function - * translates the parent value read from hardware into an array - * index. Currently only called when the clock is initialized by - * __clk_init. This callback is mandatory for clocks with - * multiple parents. It is optional (and unnecessary) for clocks - * with 0 or 1 parents. + * return value is a u8 which specifies the index corresponding to + * the parent clock. This index can be applied to either the + * .parent_names or .parents arrays. In short, this function + * translates the parent value read from hardware into an array + * index. Currently only called when the clock is initialized by + * __clk_init. This callback is mandatory for clocks with + * multiple parents. It is optional (and unnecessary) for clocks + * with 0 or 1 parents. * * @set_parent: Change the input source of this clock; for clocks with multiple - * possible parents specify a new parent by passing in the index - * as a u8 corresponding to the parent in either the .parent_names - * or .parents arrays. This function in affect translates an - * array index into the value programmed into the hardware. - * Returns 0 on success, -EERROR otherwise. + * possible parents specify a new parent by passing in the index + * as a u8 corresponding to the parent in either the .parent_names + * or .parents arrays. This function in affect translates an + * array index into the value programmed into the hardware. + * Returns 0 on success, -EERROR otherwise. * * @set_rate: Change the rate of this clock. The requested rate is specified * by the second argument, which should typically be the return @@ -254,12 +254,12 @@ void of_fixed_clk_setup(struct device_node *np); * * Flags: * CLK_GATE_SET_TO_DISABLE - by default this clock sets the bit at bit_idx to - * enable the clock. Setting this flag does the opposite: setting the bit - * disable the clock and clearing it enables the clock + * enable the clock. Setting this flag does the opposite: setting the bit + * disable the clock and clearing it enables the clock * CLK_GATE_HIWORD_MASK - The gate settings are only in lower 16-bit - * of this register, and mask of gate bits are in higher 16-bit of this - * register. While setting the gate bits, higher 16-bit should also be - * updated to indicate changing gate bits. + * of this register, and mask of gate bits are in higher 16-bit of this + * register. While setting the gate bits, higher 16-bit should also be + * updated to indicate changing gate bits. */ struct clk_gate { struct clk_hw hw; @@ -298,20 +298,20 @@ struct clk_div_table { * * Flags: * CLK_DIVIDER_ONE_BASED - by default the divisor is the value read from the - * register plus one. If CLK_DIVIDER_ONE_BASED is set then the divider is - * the raw value read from the register, with the value of zero considered + * register plus one. If CLK_DIVIDER_ONE_BASED is set then the divider is + * the raw value read from the register, with the value of zero considered * invalid, unless CLK_DIVIDER_ALLOW_ZERO is set. * CLK_DIVIDER_POWER_OF_TWO - clock divisor is 2 raised to the value read from - * the hardware register + * the hardware register * CLK_DIVIDER_ALLOW_ZERO - Allow zero divisors. For dividers which have * CLK_DIVIDER_ONE_BASED set, it is possible to end up with a zero divisor. * Some hardware implementations gracefully handle this case and allow a * zero divisor by not modifying their input clock * (divide by one / bypass). * CLK_DIVIDER_HIWORD_MASK - The divider settings are only in lower 16-bit - * of this register, and mask of divider bits are in higher 16-bit of this - * register. While setting the divider bits, higher 16-bit should also be - * updated to indicate changing divider bits. + * of this register, and mask of divider bits are in higher 16-bit of this + * register. While setting the divider bits, higher 16-bit should also be + * updated to indicate changing divider bits. * CLK_DIVIDER_ROUND_CLOSEST - Makes the best calculated divider to be rounded * to the closest integer instead of the up one. */ @@ -359,9 +359,9 @@ struct clk *clk_register_divider_table(struct device *dev, const char *name, * CLK_MUX_INDEX_ONE - register index starts at 1, not 0 * CLK_MUX_INDEX_BIT - register index is a single bit (power of two) * CLK_MUX_HIWORD_MASK - The mux settings are only in lower 16-bit of this - * register, and mask of mux bits are in higher 16-bit of this register. - * While setting the mux bits, higher 16-bit should also be updated to - * indicate changing mux bits. + * register, and mask of mux bits are in higher 16-bit of this register. + * While setting the mux bits, higher 16-bit should also be updated to + * indicate changing mux bits. */ struct clk_mux { struct clk_hw hw; -- cgit v1.2.3 From 54e73016dd217be915ed83353d296f2a133d1ad5 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 22 Apr 2014 15:11:42 +0200 Subject: clk: Improve clk_ops documentation General: - Add parameter names to .round_rate() and .set_rate(). Documentation/clk.txt: - Add missing parameter for .set_rate(), - Add missing .debug_init(). include/linux/clk-provider.h: - Add parent rate documentation for .round_rate(), - Reorder documentation to match implementation order, - Add missing documentation for .init(). Signed-off-by: Geert Uytterhoeven Signed-off-by: Mike Turquette --- include/linux/clk-provider.h | 44 +++++++++++++++++++++++++------------------- 1 file changed, 25 insertions(+), 19 deletions(-) (limited to 'include') diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 397f98505bd4..40809431641e 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -81,12 +81,20 @@ struct dentry; * this op is not set then clock rate will be initialized to 0. * * @round_rate: Given a target rate as input, returns the closest rate actually - * supported by the clock. + * supported by the clock. The parent rate is an input/output + * parameter. * * @determine_rate: Given a target rate as input, returns the closest rate * actually supported by the clock, and optionally the parent clock * that should be used to provide the clock rate. * + * @set_parent: Change the input source of this clock; for clocks with multiple + * possible parents specify a new parent by passing in the index + * as a u8 corresponding to the parent in either the .parent_names + * or .parents arrays. This function in affect translates an + * array index into the value programmed into the hardware. + * Returns 0 on success, -EERROR otherwise. + * * @get_parent: Queries the hardware to determine the parent of a clock. The * return value is a u8 which specifies the index corresponding to * the parent clock. This index can be applied to either the @@ -97,26 +105,12 @@ struct dentry; * multiple parents. It is optional (and unnecessary) for clocks * with 0 or 1 parents. * - * @set_parent: Change the input source of this clock; for clocks with multiple - * possible parents specify a new parent by passing in the index - * as a u8 corresponding to the parent in either the .parent_names - * or .parents arrays. This function in affect translates an - * array index into the value programmed into the hardware. - * Returns 0 on success, -EERROR otherwise. - * * @set_rate: Change the rate of this clock. The requested rate is specified * by the second argument, which should typically be the return * of .round_rate call. The third argument gives the parent rate * which is likely helpful for most .set_rate implementation. * Returns 0 on success, -EERROR otherwise. * - * @recalc_accuracy: Recalculate the accuracy of this clock. The clock accuracy - * is expressed in ppb (parts per billion). The parent accuracy is - * an input parameter. - * Returns the calculated accuracy. Optional - if this op is not - * set then clock accuracy will be initialized to parent accuracy - * or 0 (perfect clock) if clock has no parent. - * * @set_rate_and_parent: Change the rate and the parent of this clock. The * requested rate is specified by the second argument, which * should typically be the return of .round_rate call. The @@ -128,6 +122,18 @@ struct dentry; * separately via calls to .set_parent and .set_rate. * Returns 0 on success, -EERROR otherwise. * + * @recalc_accuracy: Recalculate the accuracy of this clock. The clock accuracy + * is expressed in ppb (parts per billion). The parent accuracy is + * an input parameter. + * Returns the calculated accuracy. Optional - if this op is not + * set then clock accuracy will be initialized to parent accuracy + * or 0 (perfect clock) if clock has no parent. + * + * @init: Perform platform-specific initialization magic. + * This is not not used by any of the basic clock types. + * Please consider other ways of solving initialization problems + * before using this callback, as its use is discouraged. + * * @debug_init: Set up type-specific debugfs entries for this clock. This * is called once, after the debugfs directory entry for this * clock has been created. The dentry pointer representing that @@ -157,15 +163,15 @@ struct clk_ops { void (*disable_unused)(struct clk_hw *hw); unsigned long (*recalc_rate)(struct clk_hw *hw, unsigned long parent_rate); - long (*round_rate)(struct clk_hw *hw, unsigned long, - unsigned long *); + long (*round_rate)(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate); long (*determine_rate)(struct clk_hw *hw, unsigned long rate, unsigned long *best_parent_rate, struct clk **best_parent_clk); int (*set_parent)(struct clk_hw *hw, u8 index); u8 (*get_parent)(struct clk_hw *hw); - int (*set_rate)(struct clk_hw *hw, unsigned long, - unsigned long); + int (*set_rate)(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate); int (*set_rate_and_parent)(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate, u8 index); -- cgit v1.2.3 From 7b42a997bfb93c6ae0709f34ec8e2860757804b5 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Fri, 18 Apr 2014 08:05:50 +0900 Subject: clk: shmobile: r8a7779: Add clocks support The R8A7779 SoC has several clocks that are too custom to be supported in a generic driver. Those clocks are all fixed rate clocks with multiplier and divisor set according to boot mode configuration. Based on work for R-Car Gen2 SoCs by Laurent Pinchart. Cc: devicetree@vger.kernel.org Acked-by: Laurent Pinchart Signed-off-by: Simon Horman Signed-off-by: Mike Turquette --- include/linux/clk/shmobile.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/linux/clk/shmobile.h b/include/linux/clk/shmobile.h index f9bf080a1123..9f8a14041dd5 100644 --- a/include/linux/clk/shmobile.h +++ b/include/linux/clk/shmobile.h @@ -1,7 +1,9 @@ /* * Copyright 2013 Ideas On Board SPRL + * Copyright 2013, 2014 Horms Solutions Ltd. * * Contact: Laurent Pinchart + * Contact: Simon Horman * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -14,6 +16,7 @@ #include +void r8a7779_clocks_init(u32 mode); void rcar_gen2_clocks_init(u32 mode); #endif -- cgit v1.2.3 From a97181adf1502128e2945b4fef2591249c565467 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 12 May 2014 14:04:47 +0200 Subject: clk: sunxi: Fixup clk_sunxi_mmc_phase_control to take a clk rather then a hw_clk __clk_get_hw is supposed to be used by clk providers, not clk consumers. Signed-off-by: Hans de Goede Reviewed-by: Ulf Hansson Signed-off-by: Mike Turquette --- include/linux/clk/sunxi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/clk/sunxi.h b/include/linux/clk/sunxi.h index 1ef5c899e458..aed28c4451d9 100644 --- a/include/linux/clk/sunxi.h +++ b/include/linux/clk/sunxi.h @@ -17,6 +17,6 @@ #include -void clk_sunxi_mmc_phase_control(struct clk_hw *hw, u8 sample, u8 output); +void clk_sunxi_mmc_phase_control(struct clk *clk, u8 sample, u8 output); #endif -- cgit v1.2.3 From 5c992afcf8e4f91fac05d39b86c7f7922a50145c Mon Sep 17 00:00:00 2001 From: Andrew Bresticker Date: Wed, 14 May 2014 17:32:59 -0700 Subject: clk: tegra: Fix xusb_hs_src clock hierarchy Currently the Tegra1x4 clock init code hard-codes the mux setting for xusb_hs_src and treats it as a fixed-factor clock. It is, however, a mux which can be parented by either xusb_ss_src/2 or pll_u_60M. Add the fixed-factor clock xusb_ss_div2 and put an entry in periph_clks[] for the xusb_hs_src mux. Signed-off-by: Andrew Bresticker Signed-off-by: Mike Turquette --- include/dt-bindings/clock/tegra114-car.h | 3 ++- include/dt-bindings/clock/tegra124-car.h | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/dt-bindings/clock/tegra114-car.h b/include/dt-bindings/clock/tegra114-car.h index 6d0d8d8ef31e..fc12621fb432 100644 --- a/include/dt-bindings/clock/tegra114-car.h +++ b/include/dt-bindings/clock/tegra114-car.h @@ -337,6 +337,7 @@ #define TEGRA114_CLK_CLK_OUT_3_MUX 308 #define TEGRA114_CLK_DSIA_MUX 309 #define TEGRA114_CLK_DSIB_MUX 310 -#define TEGRA114_CLK_CLK_MAX 311 +#define TEGRA114_CLK_XUSB_SS_DIV2 311 +#define TEGRA114_CLK_CLK_MAX 312 #endif /* _DT_BINDINGS_CLOCK_TEGRA114_CAR_H */ diff --git a/include/dt-bindings/clock/tegra124-car.h b/include/dt-bindings/clock/tegra124-car.h index 433528ab5161..8a4c5892890f 100644 --- a/include/dt-bindings/clock/tegra124-car.h +++ b/include/dt-bindings/clock/tegra124-car.h @@ -336,6 +336,7 @@ #define TEGRA124_CLK_DSIA_MUX 309 #define TEGRA124_CLK_DSIB_MUX 310 #define TEGRA124_CLK_SOR0_LVDS 311 -#define TEGRA124_CLK_CLK_MAX 312 +#define TEGRA124_CLK_XUSB_SS_DIV2 312 +#define TEGRA124_CLK_CLK_MAX 313 #endif /* _DT_BINDINGS_CLOCK_TEGRA124_CAR_H */ -- cgit v1.2.3 From 79c6ab509558f9871175c7e4411f857de12cf33b Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Fri, 23 May 2014 18:32:15 +0530 Subject: clk: divider: add CLK_DIVIDER_READ_ONLY flag From: Heiko Stuebner Similar to muxes which already have a read-only flag there sometimes exist dividers which should not be changed by the clock framework but whose value still should be readable. Therefore add a READ_ONLY flag similar to the mux-one to clk-divider Signed-off-by: Heiko Stuebner [changed flag bit to BIT(5) as suggested by Tomasz Figa] Signed-off-by: Thomas Abraham Acked-by: Tomasz Figa Acked-by: Max Schwarz Tested-by: Max Schwarz Signed-off-by: Mike Turquette --- include/linux/clk-provider.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 40809431641e..c7135dbbcd65 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -320,6 +320,8 @@ struct clk_div_table { * updated to indicate changing divider bits. * CLK_DIVIDER_ROUND_CLOSEST - Makes the best calculated divider to be rounded * to the closest integer instead of the up one. + * CLK_DIVIDER_READ_ONLY - The divider settings are preconfigured and should + * not be changed by the clock framework. */ struct clk_divider { struct clk_hw hw; @@ -336,8 +338,10 @@ struct clk_divider { #define CLK_DIVIDER_ALLOW_ZERO BIT(2) #define CLK_DIVIDER_HIWORD_MASK BIT(3) #define CLK_DIVIDER_ROUND_CLOSEST BIT(4) +#define CLK_DIVIDER_READ_ONLY BIT(5) extern const struct clk_ops clk_divider_ops; +extern const struct clk_ops clk_divider_ro_ops; struct clk *clk_register_divider(struct device *dev, const char *name, const char *parent_name, unsigned long flags, void __iomem *reg, u8 shift, u8 width, -- cgit v1.2.3 From b59e869674f5b6779c65ddb13cf799cd01c07072 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 28 May 2014 10:52:34 +0900 Subject: ARM: shmobile: r8a7779: Add clock index macros for DT sources Add macros usable by device tree sources to reference r8a7779 clocks by index. Based on work for the r8a7791 SoC by Laurent Pinchart. Acked-by: Laurent Pinchart Signed-off-by: Simon Horman Signed-off-by: Mike Turquette --- include/dt-bindings/clock/r8a7779-clock.h | 64 +++++++++++++++++++++++++++++++ 1 file changed, 64 insertions(+) create mode 100644 include/dt-bindings/clock/r8a7779-clock.h (limited to 'include') diff --git a/include/dt-bindings/clock/r8a7779-clock.h b/include/dt-bindings/clock/r8a7779-clock.h new file mode 100644 index 000000000000..381a6114237a --- /dev/null +++ b/include/dt-bindings/clock/r8a7779-clock.h @@ -0,0 +1,64 @@ +/* + * Copyright (C) 2013 Horms Solutions Ltd. + * + * Contact: Simon Horman + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __DT_BINDINGS_CLOCK_R8A7779_H__ +#define __DT_BINDINGS_CLOCK_R8A7779_H__ + +/* CPG */ +#define R8A7779_CLK_PLLA 0 +#define R8A7779_CLK_Z 1 +#define R8A7779_CLK_ZS 2 +#define R8A7779_CLK_S 3 +#define R8A7779_CLK_S1 4 +#define R8A7779_CLK_P 5 +#define R8A7779_CLK_B 6 +#define R8A7779_CLK_OUT 7 + +/* MSTP 0 */ +#define R8A7779_CLK_HSPI 7 +#define R8A7779_CLK_TMU2 14 +#define R8A7779_CLK_TMU1 15 +#define R8A7779_CLK_TMU0 16 +#define R8A7779_CLK_HSCIF1 18 +#define R8A7779_CLK_HSCIF0 19 +#define R8A7779_CLK_SCIF5 21 +#define R8A7779_CLK_SCIF4 22 +#define R8A7779_CLK_SCIF3 23 +#define R8A7779_CLK_SCIF2 24 +#define R8A7779_CLK_SCIF1 25 +#define R8A7779_CLK_SCIF0 26 +#define R8A7779_CLK_I2C3 27 +#define R8A7779_CLK_I2C2 28 +#define R8A7779_CLK_I2C1 29 +#define R8A7779_CLK_I2C0 30 + +/* MSTP 1 */ +#define R8A7779_CLK_USB01 0 +#define R8A7779_CLK_USB2 1 +#define R8A7779_CLK_DU 3 +#define R8A7779_CLK_VIN2 8 +#define R8A7779_CLK_VIN1 9 +#define R8A7779_CLK_VIN0 10 +#define R8A7779_CLK_ETHER 14 +#define R8A7779_CLK_SATA 15 +#define R8A7779_CLK_PCIE 16 +#define R8A7779_CLK_VIN3 20 + +/* MSTP 3 */ +#define R8A7779_CLK_SDHI3 20 +#define R8A7779_CLK_SDHI2 21 +#define R8A7779_CLK_SDHI1 22 +#define R8A7779_CLK_SDHI0 23 +#define R8A7779_CLK_MMC1 30 +#define R8A7779_CLK_MMC0 31 + + +#endif /* __DT_BINDINGS_CLOCK_R8A7779_H__ */ -- cgit v1.2.3 From c685841ee127e8023a33be68fd8af6fe192a3665 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Fri, 16 May 2014 16:07:13 -0700 Subject: clk: qcom: Support msm8974pro global clock control hardware A new PLL (gpll4) is added on msm8974 PRO devices to support a faster sdc1 clock rate. Add support for this and the two new sdcc cal clocks. Signed-off-by: Stephen Boyd Signed-off-by: Mike Turquette --- include/dt-bindings/clock/qcom,gcc-msm8974.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/dt-bindings/clock/qcom,gcc-msm8974.h b/include/dt-bindings/clock/qcom,gcc-msm8974.h index 223ca174d9d3..51e51c860fe6 100644 --- a/include/dt-bindings/clock/qcom,gcc-msm8974.h +++ b/include/dt-bindings/clock/qcom,gcc-msm8974.h @@ -316,5 +316,9 @@ #define GCC_CE2_CLK_SLEEP_ENA 299 #define GCC_CE2_AXI_CLK_SLEEP_ENA 300 #define GCC_CE2_AHB_CLK_SLEEP_ENA 301 +#define GPLL4 302 +#define GPLL4_VOTE 303 +#define GCC_SDCC1_CDCCAL_SLEEP_CLK 304 +#define GCC_SDCC1_CDCCAL_FF_CLK 305 #endif -- cgit v1.2.3