From 9ee677c2276bfcbcf68042ec2718a504af0c5fd7 Mon Sep 17 00:00:00 2001 From: David Kilroy Date: Tue, 23 Dec 2008 14:03:38 +0000 Subject: wireless: Add channel/frequency conversions to ieee80211.h Added mappings for FHSS, DSSS and OFDM channels - with macros to point HR DSSS and ERP to the DSSS mappings. Currently just static inline functions. Use the new functions in the older fullmac drivers. This eliminates a number of const static buffers and removes a couple of range checks that are now redundant. Signed-off-by: David Kilroy Acked-by: Arnaldo Carvalho de Melo Acked-by: Richard Farina Acked-by: Jeroen Vreeken Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 116 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 116 insertions(+) (limited to 'include') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index c4e6ca1a6306..cade2556af0e 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1185,4 +1185,120 @@ static inline u8 *ieee80211_get_DA(struct ieee80211_hdr *hdr) return hdr->addr1; } +/** + * ieee80211_fhss_chan_to_freq - get channel frequency + * @channel: the FHSS channel + * + * Convert IEEE802.11 FHSS channel to frequency (MHz) + * Ref IEEE 802.11-2007 section 14.6 + */ +static inline int ieee80211_fhss_chan_to_freq(int channel) +{ + if ((channel > 1) && (channel < 96)) + return channel + 2400; + else + return -1; +} + +/** + * ieee80211_freq_to_fhss_chan - get channel + * @freq: the channels frequency + * + * Convert frequency (MHz) to IEEE802.11 FHSS channel + * Ref IEEE 802.11-2007 section 14.6 + */ +static inline int ieee80211_freq_to_fhss_chan(int freq) +{ + if ((freq > 2401) && (freq < 2496)) + return freq - 2400; + else + return -1; +} + +/** + * ieee80211_dsss_chan_to_freq - get channel center frequency + * @channel: the DSSS channel + * + * Convert IEEE802.11 DSSS channel to the center frequency (MHz). + * Ref IEEE 802.11-2007 section 15.6 + */ +static inline int ieee80211_dsss_chan_to_freq(int channel) +{ + if ((channel > 0) && (channel < 14)) + return 2407 + (channel * 5); + else if (channel == 14) + return 2484; + else + return -1; +} + +/** + * ieee80211_freq_to_dsss_chan - get channel + * @freq: the frequency + * + * Convert frequency (MHz) to IEEE802.11 DSSS channel + * Ref IEEE 802.11-2007 section 15.6 + * + * This routine selects the channel with the closest center frequency. + */ +static inline int ieee80211_freq_to_dsss_chan(int freq) +{ + if ((freq >= 2410) && (freq < 2475)) + return (freq - 2405) / 5; + else if ((freq >= 2482) && (freq < 2487)) + return 14; + else + return -1; +} + +/* Convert IEEE802.11 HR DSSS channel to frequency (MHz) and back + * Ref IEEE 802.11-2007 section 18.4.6.2 + * + * The channels and frequencies are the same as those defined for DSSS + */ +#define ieee80211_hr_chan_to_freq(chan) ieee80211_dsss_chan_to_freq(chan) +#define ieee80211_freq_to_hr_chan(freq) ieee80211_freq_to_dsss_chan(freq) + +/* Convert IEEE802.11 ERP channel to frequency (MHz) and back + * Ref IEEE 802.11-2007 section 19.4.2 + */ +#define ieee80211_erp_chan_to_freq(chan) ieee80211_hr_chan_to_freq(chan) +#define ieee80211_freq_to_erp_chan(freq) ieee80211_freq_to_hr_chan(freq) + +/** + * ieee80211_ofdm_chan_to_freq - get channel center frequency + * @s_freq: starting frequency == (dotChannelStartingFactor/2) MHz + * @channel: the OFDM channel + * + * Convert IEEE802.11 OFDM channel to center frequency (MHz) + * Ref IEEE 802.11-2007 section 17.3.8.3.2 + */ +static inline int ieee80211_ofdm_chan_to_freq(int s_freq, int channel) +{ + if ((channel > 0) && (channel <= 200) && + (s_freq >= 4000)) + return s_freq + (channel * 5); + else + return -1; +} + +/** + * ieee80211_freq_to_ofdm_channel - get channel + * @s_freq: starting frequency == (dotChannelStartingFactor/2) MHz + * @freq: the frequency + * + * Convert frequency (MHz) to IEEE802.11 OFDM channel + * Ref IEEE 802.11-2007 section 17.3.8.3.2 + * + * This routine selects the channel with the closest center frequency. + */ +static inline int ieee80211_freq_to_ofdm_chan(int s_freq, int freq) +{ + if ((freq > (s_freq + 2)) && (freq <= (s_freq + 1202)) && + (s_freq >= 4000)) + return (freq + 2 - s_freq) / 5; + else + return -1; +} + #endif /* LINUX_IEEE80211_H */ -- cgit v1.2.3 From 10c806b32db1c9f010945e92043ef2a3f6fffc3f Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Tue, 23 Dec 2008 15:58:36 -0800 Subject: mac80211: add HT conf helpers In HT capable drivers you often need to check if you are currently using HT20 or HT40. This adds a few small helpers to let drivers figure that out. Signed-off-by: Luis R. Rodriguez Acked-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 559422fc0943..1e8db8ae6159 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1962,4 +1962,34 @@ rate_lowest_index(struct ieee80211_supported_band *sband, int ieee80211_rate_control_register(struct rate_control_ops *ops); void ieee80211_rate_control_unregister(struct rate_control_ops *ops); +static inline bool +conf_is_ht20(struct ieee80211_conf *conf) +{ + return conf->ht.channel_type == NL80211_CHAN_HT20; +} + +static inline bool +conf_is_ht40_minus(struct ieee80211_conf *conf) +{ + return conf->ht.channel_type == NL80211_CHAN_HT40MINUS; +} + +static inline bool +conf_is_ht40_plus(struct ieee80211_conf *conf) +{ + return conf->ht.channel_type == NL80211_CHAN_HT40PLUS; +} + +static inline bool +conf_is_ht40(struct ieee80211_conf *conf) +{ + return conf_is_ht40_minus(conf) || conf_is_ht40_plus(conf); +} + +static inline bool +conf_is_ht(struct ieee80211_conf *conf) +{ + return conf->ht.channel_type != NL80211_CHAN_NO_HT; +} + #endif /* MAC80211_H */ -- cgit v1.2.3 From 285256a59d790c6a9afe8ec82804a369d956ac06 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Tue, 23 Dec 2008 15:58:45 -0800 Subject: mac80211: no need for ht.enabled We can simply use conf_is_ht() check where needed. Signed-off-by: Luis R. Rodriguez Acked-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 1e8db8ae6159..9d67fdf1c26a 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -508,7 +508,6 @@ static inline int __deprecated __IEEE80211_CONF_SHORT_SLOT_TIME(void) #define IEEE80211_CONF_SHORT_SLOT_TIME (__IEEE80211_CONF_SHORT_SLOT_TIME()) struct ieee80211_ht_conf { - bool enabled; enum nl80211_channel_type channel_type; }; -- cgit v1.2.3 From e3c92df08cbf6a0cb60a9c7ce377378383967e07 Mon Sep 17 00:00:00 2001 From: Vasanthakumar Thiagarajan Date: Wed, 24 Dec 2008 13:53:11 +0530 Subject: mac80211: Fix tx power setting power_level in ieee80211_conf is being used for more than one purpose. It being used as user configured power limit and the final power limit given to the driver. By doing so, except very first time, the tx power limit is taken from min(chan->max_power, local->hw.conf.power_level) which is not what we want. This patch defines a new memeber in ieee80211_conf which is meant only for user configured power limit. Signed-off-by: Vasanthakumar Thiagarajan Signed-off-by: John W. Linville --- include/net/mac80211.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 9d67fdf1c26a..ffcbd12775a4 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -546,6 +546,7 @@ enum ieee80211_conf_changed { * @listen_interval: listen interval in units of beacon interval * @flags: configuration flags defined above * @power_level: requested transmit power (in dBm) + * @user_power_level: User configured transmit power (in dBm) * @channel: the channel to tune to * @ht: the HT configuration for the device * @long_frame_max_tx_count: Maximum number of transmissions for a "long" frame @@ -559,6 +560,7 @@ struct ieee80211_conf { int beacon_int; u32 flags; int power_level; + int user_power_level; u16 listen_interval; bool radio_enabled; -- cgit v1.2.3 From 6b1c7c67603efdf0b39f6056989b0f8194cdc1f3 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Thu, 25 Dec 2008 00:39:28 +0100 Subject: b43/ssb: Add SPROM8 extraction and LP-PHY detection This adds detection code for the LP-PHY and SPROM extraction code for version 8, which is needed by the LP-PHY and newer N-PHY. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- include/linux/ssb/ssb_regs.h | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) (limited to 'include') diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h index 99a0f991e850..a01b982b5783 100644 --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -326,6 +326,42 @@ #define SSB_SPROM5_GPIOB_P3 0xFF00 /* Pin 3 */ #define SSB_SPROM5_GPIOB_P3_SHIFT 8 +/* SPROM Revision 8 */ +#define SSB_SPROM8_BFLLO 0x1084 /* Boardflags (low 16 bits) */ +#define SSB_SPROM8_BFLHI 0x1086 /* Boardflags Hi */ +#define SSB_SPROM8_IL0MAC 0x108C /* 6 byte MAC address */ +#define SSB_SPROM8_CCODE 0x1092 /* 2 byte country code */ +#define SSB_SPROM8_ANTAVAIL 0x109C /* Antenna available bitfields*/ +#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */ +#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8 +#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */ +#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0 +#define SSB_SPROM8_AGAIN01 0x109E /* Antenna Gain (in dBm Q5.2) */ +#define SSB_SPROM8_AGAIN0 0x00FF /* Antenna 0 */ +#define SSB_SPROM8_AGAIN0_SHIFT 0 +#define SSB_SPROM8_AGAIN1 0xFF00 /* Antenna 1 */ +#define SSB_SPROM8_AGAIN1_SHIFT 8 +#define SSB_SPROM8_AGAIN23 0x10A0 +#define SSB_SPROM8_AGAIN2 0x00FF /* Antenna 2 */ +#define SSB_SPROM8_AGAIN2_SHIFT 0 +#define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */ +#define SSB_SPROM8_AGAIN3_SHIFT 8 +#define SSB_SPROM8_GPIOA 0x1096 /*Gen. Purpose IO # 0 and 1 */ +#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */ +#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */ +#define SSB_SPROM8_GPIOA_P1_SHIFT 8 +#define SSB_SPROM8_GPIOB 0x1098 /* Gen. Purpose IO # 2 and 3 */ +#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ +#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ +#define SSB_SPROM8_GPIOB_P3_SHIFT 8 +#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power BG in path 1 */ +#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */ +#define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ +#define SSB_SPROM8_ITSSI_BG_SHIFT 8 +#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power A in path 1 */ +#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power A */ +#define SSB_SPROM8_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */ +#define SSB_SPROM8_ITSSI_A_SHIFT 8 /* Values for SSB_SPROM1_BINF_CCODE */ enum { -- cgit v1.2.3 From dc822b5db479dc0178d5c04cbb656dad0b6564fb Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 29 Dec 2008 12:55:09 +0100 Subject: mac80211: clean up set_key callback The set_key callback now seems rather odd, passing a MAC address instead of a station struct, and a local address instead of a vif struct. Change that. Signed-off-by: Johannes Berg Acked-by: Bob Copeland [ath5k] Acked-by: Ivo van Doorn [rt2x00] Acked-by: Christian Lamparter [p54] Tested-by: Kalle Valo [iwl3945] Tested-by: Samuel Ortiz [iwl3945] Signed-off-by: John W. Linville --- include/net/mac80211.h | 20 ++++++++------------ 1 file changed, 8 insertions(+), 12 deletions(-) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index ffcbd12775a4..9215b1ec90ec 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -715,8 +715,8 @@ enum ieee80211_key_flags { * - Temporal Encryption Key (128 bits) * - Temporal Authenticator Tx MIC Key (64 bits) * - Temporal Authenticator Rx MIC Key (64 bits) - * @icv_len: FIXME - * @iv_len: FIXME + * @icv_len: The ICV length for this key type + * @iv_len: The IV length for this key type */ struct ieee80211_key_conf { enum ieee80211_key_alg alg; @@ -1019,16 +1019,12 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, * * The set_key() callback in the &struct ieee80211_ops for a given * device is called to enable hardware acceleration of encryption and - * decryption. The callback takes an @address parameter that will be - * the broadcast address for default keys, the other station's hardware - * address for individual keys or the zero address for keys that will - * be used only for transmission. + * decryption. The callback takes a @sta parameter that will be NULL + * for default keys or keys used for transmission only, or point to + * the station information for the peer for individual keys. * Multiple transmission keys with the same key index may be used when * VLANs are configured for an access point. * - * The @local_address parameter will always be set to our own address, - * this is only relevant if you support multiple local addresses. - * * When transmitting, the TX control data will use the @hw_key_idx * selected by the driver by modifying the &struct ieee80211_key_conf * pointed to by the @key parameter to the set_key() function. @@ -1233,8 +1229,8 @@ enum ieee80211_ampdu_mlme_action { * * @set_key: See the section "Hardware crypto acceleration" * This callback can sleep, and is only called between add_interface - * and remove_interface calls, i.e. while the interface with the - * given local_address is enabled. + * and remove_interface calls, i.e. while the given virtual interface + * is enabled. * * @update_tkip_key: See the section "Hardware crypto acceleration" * This callback will be called in the context of Rx. Called for drivers @@ -1311,7 +1307,7 @@ struct ieee80211_ops { int (*set_tim)(struct ieee80211_hw *hw, struct ieee80211_sta *sta, bool set); int (*set_key)(struct ieee80211_hw *hw, enum set_key_cmd cmd, - const u8 *local_address, const u8 *address, + struct ieee80211_vif *vif, struct ieee80211_sta *sta, struct ieee80211_key_conf *key); void (*update_tkip_key)(struct ieee80211_hw *hw, struct ieee80211_key_conf *conf, const u8 *address, -- cgit v1.2.3 From 63649b6cf0a964582af2b4d4734e28ca90ec8f5c Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Thu, 1 Jan 2009 15:01:44 -0500 Subject: ath5k: support LEDs on Acer Aspire One netbook Add vendor ID for Foxconn and use it to set the ath5k LED gpio and polarity for Acer branded laptops. base.c: Changes-licensed-under: 3-Clause-BSD Reported-by: Maxim Levitsky Tested-by: Maxim Levitsky Tested-by: Andreas Mohr Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- include/linux/pci_ids.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 302423afa136..5b7a48c1d616 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -834,6 +834,8 @@ #define PCI_DEVICE_ID_PROMISE_20276 0x5275 #define PCI_DEVICE_ID_PROMISE_20277 0x7275 +#define PCI_VENDOR_ID_FOXCONN 0x105b + #define PCI_VENDOR_ID_UMC 0x1060 #define PCI_DEVICE_ID_UMC_UM8673F 0x0101 #define PCI_DEVICE_ID_UMC_UM8886BF 0x673a -- cgit v1.2.3 From 2bf30fabadbdcb535b057afc92aba015884847dc Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 6 Jan 2009 23:23:56 +0100 Subject: mac80211: remove user_power_level from driver API I missed this during review of "mac80211: Fix tx power setting", the user_power_level shouldn't be available to the driver but rather be an internal value used to calculate the value for the driver. Signed-off-by: Johannes Berg Cc: Vasanthakumar Thiagarajan Signed-off-by: John W. Linville --- include/net/mac80211.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 9215b1ec90ec..0ffe932942fd 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -546,7 +546,6 @@ enum ieee80211_conf_changed { * @listen_interval: listen interval in units of beacon interval * @flags: configuration flags defined above * @power_level: requested transmit power (in dBm) - * @user_power_level: User configured transmit power (in dBm) * @channel: the channel to tune to * @ht: the HT configuration for the device * @long_frame_max_tx_count: Maximum number of transmissions for a "long" frame @@ -560,7 +559,6 @@ struct ieee80211_conf { int beacon_int; u32 flags; int power_level; - int user_power_level; u16 listen_interval; bool radio_enabled; -- cgit v1.2.3 From 4797938c5dfa22af30fd16679192972f878419a1 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 7 Jan 2009 10:13:27 +0100 Subject: mac80211: clean up channel type config The channel_type really doesn't need to be the only member in a new structure, so remove the struct. Additionally, remove the _CONF_CHANGE_HT flag and use _CONF_CHANGE_CHANNEL when the channel type changes, since that's enough of a change to require reprogramming the hardware anyway. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 20 +++++++------------- 1 file changed, 7 insertions(+), 13 deletions(-) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 0ffe932942fd..76537f103872 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -507,10 +507,6 @@ static inline int __deprecated __IEEE80211_CONF_SHORT_SLOT_TIME(void) } #define IEEE80211_CONF_SHORT_SLOT_TIME (__IEEE80211_CONF_SHORT_SLOT_TIME()) -struct ieee80211_ht_conf { - enum nl80211_channel_type channel_type; -}; - /** * enum ieee80211_conf_changed - denotes which configuration changed * @@ -520,9 +516,8 @@ struct ieee80211_ht_conf { * @IEEE80211_CONF_CHANGE_RADIOTAP: the radiotap flag changed * @IEEE80211_CONF_CHANGE_PS: the PS flag changed * @IEEE80211_CONF_CHANGE_POWER: the TX power changed - * @IEEE80211_CONF_CHANGE_CHANNEL: the channel changed + * @IEEE80211_CONF_CHANGE_CHANNEL: the channel/channel_type changed * @IEEE80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed - * @IEEE80211_CONF_CHANGE_HT: HT configuration changed */ enum ieee80211_conf_changed { IEEE80211_CONF_CHANGE_RADIO_ENABLED = BIT(0), @@ -533,7 +528,6 @@ enum ieee80211_conf_changed { IEEE80211_CONF_CHANGE_POWER = BIT(5), IEEE80211_CONF_CHANGE_CHANNEL = BIT(6), IEEE80211_CONF_CHANGE_RETRY_LIMITS = BIT(7), - IEEE80211_CONF_CHANGE_HT = BIT(8), }; /** @@ -547,7 +541,7 @@ enum ieee80211_conf_changed { * @flags: configuration flags defined above * @power_level: requested transmit power (in dBm) * @channel: the channel to tune to - * @ht: the HT configuration for the device + * @channel_type: the channel (HT) type * @long_frame_max_tx_count: Maximum number of transmissions for a "long" frame * (a frame not RTS protected), called "dot11LongRetryLimit" in 802.11, * but actually means the number of transmissions not the number of retries @@ -566,7 +560,7 @@ struct ieee80211_conf { u8 long_frame_max_tx_count, short_frame_max_tx_count; struct ieee80211_channel *channel; - struct ieee80211_ht_conf ht; + enum nl80211_channel_type channel_type; }; /** @@ -1960,19 +1954,19 @@ void ieee80211_rate_control_unregister(struct rate_control_ops *ops); static inline bool conf_is_ht20(struct ieee80211_conf *conf) { - return conf->ht.channel_type == NL80211_CHAN_HT20; + return conf->channel_type == NL80211_CHAN_HT20; } static inline bool conf_is_ht40_minus(struct ieee80211_conf *conf) { - return conf->ht.channel_type == NL80211_CHAN_HT40MINUS; + return conf->channel_type == NL80211_CHAN_HT40MINUS; } static inline bool conf_is_ht40_plus(struct ieee80211_conf *conf) { - return conf->ht.channel_type == NL80211_CHAN_HT40PLUS; + return conf->channel_type == NL80211_CHAN_HT40PLUS; } static inline bool @@ -1984,7 +1978,7 @@ conf_is_ht40(struct ieee80211_conf *conf) static inline bool conf_is_ht(struct ieee80211_conf *conf) { - return conf->ht.channel_type != NL80211_CHAN_NO_HT; + return conf->channel_type != NL80211_CHAN_NO_HT; } #endif /* MAC80211_H */ -- cgit v1.2.3 From 46f2c4bd7e2ba2cfedbcd4fe15d316eebc608cba Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 6 Jan 2009 18:13:18 +0100 Subject: mac80211: move dynamic PS timeout to hardware config This will be needed for drivers that set the IEEE80211_HW_NO_STACK_DYNAMIC_PS flag and still want to handle dynamic PS. Signed-off-by: Johannes Berg Reviewed-by: Kalle Valo Signed-off-by: John W. Linville --- include/net/mac80211.h | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 76537f103872..83ee8a212296 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -515,6 +515,7 @@ static inline int __deprecated __IEEE80211_CONF_SHORT_SLOT_TIME(void) * @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed * @IEEE80211_CONF_CHANGE_RADIOTAP: the radiotap flag changed * @IEEE80211_CONF_CHANGE_PS: the PS flag changed + * @IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT: the dynamic PS timeout changed * @IEEE80211_CONF_CHANGE_POWER: the TX power changed * @IEEE80211_CONF_CHANGE_CHANNEL: the channel/channel_type changed * @IEEE80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed @@ -525,9 +526,10 @@ enum ieee80211_conf_changed { IEEE80211_CONF_CHANGE_LISTEN_INTERVAL = BIT(2), IEEE80211_CONF_CHANGE_RADIOTAP = BIT(3), IEEE80211_CONF_CHANGE_PS = BIT(4), - IEEE80211_CONF_CHANGE_POWER = BIT(5), - IEEE80211_CONF_CHANGE_CHANNEL = BIT(6), - IEEE80211_CONF_CHANGE_RETRY_LIMITS = BIT(7), + IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT = BIT(5), + IEEE80211_CONF_CHANGE_POWER = BIT(6), + IEEE80211_CONF_CHANGE_CHANNEL = BIT(7), + IEEE80211_CONF_CHANGE_RETRY_LIMITS = BIT(8), }; /** @@ -540,6 +542,7 @@ enum ieee80211_conf_changed { * @listen_interval: listen interval in units of beacon interval * @flags: configuration flags defined above * @power_level: requested transmit power (in dBm) + * @dynamic_ps_timeout: dynamic powersave timeout (in ms) * @channel: the channel to tune to * @channel_type: the channel (HT) type * @long_frame_max_tx_count: Maximum number of transmissions for a "long" frame @@ -552,7 +555,7 @@ enum ieee80211_conf_changed { struct ieee80211_conf { int beacon_int; u32 flags; - int power_level; + int power_level, dynamic_ps_timeout; u16 listen_interval; bool radio_enabled; -- cgit v1.2.3 From 4be8c3873e0b88397866d3ede578503e188f9ad2 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 7 Jan 2009 18:28:20 +0100 Subject: mac80211: extend/document powersave API This modifies hardware flags for powersave to support three different flags: * IEEE80211_HW_SUPPORTS_PS - indicates general PS support * IEEE80211_HW_PS_NULLFUNC_STACK - indicates nullfunc sending in software * IEEE80211_HW_SUPPORTS_DYNAMIC_PS - indicates dynamic PS on the device It also adds documentation for all this which explains how to set the various flags. Additionally, it fixes a few things: * a spot where && was used to test flags * enable CONF_PS only when associated again Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 53 +++++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 48 insertions(+), 5 deletions(-) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 83ee8a212296..8a305bfdb87b 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -850,10 +850,15 @@ enum ieee80211_tkip_key_type { * @IEEE80211_HW_AMPDU_AGGREGATION: * Hardware supports 11n A-MPDU aggregation. * - * @IEEE80211_HW_NO_STACK_DYNAMIC_PS: - * Hardware which has dynamic power save support, meaning - * that power save is enabled in idle periods, and don't need support - * from stack. + * @IEEE80211_HW_SUPPORTS_PS: + * Hardware has power save support (i.e. can go to sleep). + * + * @IEEE80211_HW_PS_NULLFUNC_STACK: + * Hardware requires nullfunc frame handling in stack, implies + * stack support for dynamic PS. + * + * @IEEE80211_HW_SUPPORTS_DYNAMIC_PS: + * Hardware has support for dynamic PS. */ enum ieee80211_hw_flags { IEEE80211_HW_RX_INCLUDES_FCS = 1<<1, @@ -866,7 +871,9 @@ enum ieee80211_hw_flags { IEEE80211_HW_NOISE_DBM = 1<<8, IEEE80211_HW_SPECTRUM_MGMT = 1<<9, IEEE80211_HW_AMPDU_AGGREGATION = 1<<10, - IEEE80211_HW_NO_STACK_DYNAMIC_PS = 1<<11, + IEEE80211_HW_SUPPORTS_PS = 1<<11, + IEEE80211_HW_PS_NULLFUNC_STACK = 1<<12, + IEEE80211_HW_SUPPORTS_DYNAMIC_PS = 1<<13, }; /** @@ -1052,6 +1059,42 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, * handler is software decryption with wrap around of iv16. */ +/** + * DOC: Powersave support + * + * mac80211 has support for various powersave implementations. + * + * First, it can support hardware that handles all powersaving by + * itself, such hardware should simply set the %IEEE80211_HW_SUPPORTS_PS + * hardware flag. In that case, it will be told about the desired + * powersave mode depending on the association status, and the driver + * must take care of sending nullfunc frames when necessary, i.e. when + * entering and leaving powersave mode. The driver is required to look at + * the AID in beacons and signal to the AP that it woke up when it finds + * traffic directed to it. This mode supports dynamic PS by simply + * enabling/disabling PS. + * + * Additionally, such hardware may set the %IEEE80211_HW_SUPPORTS_DYNAMIC_PS + * flag to indicate that it can support dynamic PS mode itself (see below). + * + * Other hardware designs cannot send nullfunc frames by themselves and also + * need software support for parsing the TIM bitmap. This is also supported + * by mac80211 by combining the %IEEE80211_HW_SUPPORTS_PS and + * %IEEE80211_HW_PS_NULLFUNC_STACK flags. The hardware is of course still + * required to pass up beacons. Additionally, in this case, mac80211 will + * wake up the hardware when multicast traffic is announced in the beacon. + * + * FIXME: I don't think we can be fast enough in software when we want to + * receive multicast traffic? + * + * Dynamic powersave mode is an extension to normal powersave mode in which + * the hardware stays awake for a user-specified period of time after sending + * a frame so that reply frames need not be buffered and therefore delayed + * to the next wakeup. This can either be supported by hardware, in which case + * the driver needs to look at the @dynamic_ps_timeout hardware configuration + * value, or by the stack if all nullfunc handling is in the stack. + */ + /** * DOC: Frame filtering * -- cgit v1.2.3 From 3e0c3ff36c4c7b9e39af7d600e399664ca04e817 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 7 Jan 2009 17:43:34 -0800 Subject: cfg80211: allow multiple driver regulatory_hints() We add support for multiple drivers to provide a regulatory_hint() on a system by adding a wiphy specific regulatory domain cache. This allows drivers to keep around cache their own regulatory domain structure queried from CRDA. We handle conflicts by intersecting multiple regulatory domains, each driver will stick to its own regulatory domain though unless a country IE has been received and processed. If the user already requested a regulatory domain and a driver requests the same regulatory domain then simply copy to the driver's regd the same regulatory domain and do not call CRDA, do not collect $200. Signed-off-by: Luis R. Rodriguez Acked-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/wireless.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include') diff --git a/include/net/wireless.h b/include/net/wireless.h index 21c5d966142d..9e73aae40c5d 100644 --- a/include/net/wireless.h +++ b/include/net/wireless.h @@ -187,6 +187,10 @@ struct ieee80211_supported_band { * we will disregard the first regulatory hint (when the * initiator is %REGDOM_SET_BY_CORE). * @reg_notifier: the driver's regulatory notification callback + * @regd: the driver's regulatory domain, if one was requested via + * the regulatory_hint() API. This can be used by the driver + * on the reg_notifier() if it chooses to ignore future + * regulatory domain changes caused by other drivers. */ struct wiphy { /* assign these fields before you register the wiphy */ @@ -213,6 +217,8 @@ struct wiphy { /* fields below are read-only, assigned by cfg80211 */ + const struct ieee80211_regdomain *regd; + /* the item in /sys/class/ieee80211/ points to this, * you need use set_wiphy_dev() (see below) */ struct device dev; -- cgit v1.2.3 From 5394af4d86ae51b369ff243c3f75b6f9a74e164b Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Thu, 8 Jan 2009 13:31:59 +0200 Subject: mac80211: 802.11w - STA flag for MFP Add flags for setting STA entries and struct ieee80211_if_sta to indicate whether management frame protection (MFP) is used. Signed-off-by: Jouni Malinen Acked-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 2 ++ include/net/cfg80211.h | 2 ++ 2 files changed, 4 insertions(+) (limited to 'include') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index e86ed59f9ad5..218f0e73a7ae 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -412,12 +412,14 @@ enum nl80211_iftype { * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames * with short barker preamble * @NL80211_STA_FLAG_WME: station is WME/QoS capable + * @NL80211_STA_FLAG_MFP: station uses management frame protection */ enum nl80211_sta_flags { __NL80211_STA_FLAG_INVALID, NL80211_STA_FLAG_AUTHORIZED, NL80211_STA_FLAG_SHORT_PREAMBLE, NL80211_STA_FLAG_WME, + NL80211_STA_FLAG_MFP, /* keep last */ __NL80211_STA_FLAG_AFTER_LAST, diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 23c0ab74ded6..6619ed106134 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -112,12 +112,14 @@ struct beacon_parameters { * @STATION_FLAG_SHORT_PREAMBLE: station is capable of receiving frames * with short preambles * @STATION_FLAG_WME: station is WME/QoS capable + * @STATION_FLAG_MFP: station uses management frame protection */ enum station_flags { STATION_FLAG_CHANGED = 1<<0, STATION_FLAG_AUTHORIZED = 1< Date: Thu, 8 Jan 2009 13:32:00 +0200 Subject: mac80211: 802.11w - CCMP for management frames Extend CCMP to support encryption and decryption of unicast management frames. Signed-off-by: Jouni Malinen Acked-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'include') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index cade2556af0e..d5165895f316 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1030,6 +1030,7 @@ enum ieee80211_category { WLAN_CATEGORY_QOS = 1, WLAN_CATEGORY_DLS = 2, WLAN_CATEGORY_BACK = 3, + WLAN_CATEGORY_PUBLIC = 4, WLAN_CATEGORY_WMM = 17, }; @@ -1185,6 +1186,35 @@ static inline u8 *ieee80211_get_DA(struct ieee80211_hdr *hdr) return hdr->addr1; } +/** + * ieee80211_is_robust_mgmt_frame - check if frame is a robust management frame + * @hdr: the frame (buffer must include at least the first octet of payload) + */ +static inline bool ieee80211_is_robust_mgmt_frame(struct ieee80211_hdr *hdr) +{ + if (ieee80211_is_disassoc(hdr->frame_control) || + ieee80211_is_deauth(hdr->frame_control)) + return true; + + if (ieee80211_is_action(hdr->frame_control)) { + u8 *category; + + /* + * Action frames, excluding Public Action frames, are Robust + * Management Frames. However, if we are looking at a Protected + * frame, skip the check since the data may be encrypted and + * the frame has already been found to be a Robust Management + * Frame (by the other end). + */ + if (ieee80211_has_protected(hdr->frame_control)) + return true; + category = ((u8 *) hdr) + 24; + return *category != WLAN_CATEGORY_PUBLIC; + } + + return false; +} + /** * ieee80211_fhss_chan_to_freq - get channel frequency * @channel: the FHSS channel -- cgit v1.2.3 From 765cb46a3fc856245ea68a7c961ac87c77e4ae2d Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Thu, 8 Jan 2009 13:32:01 +0200 Subject: mac80211: 802.11w - Add BIP (AES-128-CMAC) Implement Broadcast/Multicast Integrity Protocol for management frame protection. This patch adds the needed definitions for the new information element (MMIE) and implementation for the new "encryption" type (though, BIP is actually not encrypting data, it provides only integrity protection). These routines will be used by a follow-on patch that enables BIP for multicast/broadcast robust management frames. Signed-off-by: Jouni Malinen Acked-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index d5165895f316..cceb9e86c744 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -655,6 +655,15 @@ struct ieee80211_mgmt { #define IEEE80211_MIN_ACTION_SIZE offsetof(struct ieee80211_mgmt, u.action.u) +/* Management MIC information element (IEEE 802.11w) */ +struct ieee80211_mmie { + u8 element_id; + u8 length; + __le16 key_id; + u8 sequence_number[6]; + u8 mic[8]; +} __attribute__ ((packed)); + /* Control frames */ struct ieee80211_rts { __le16 frame_control; @@ -1018,6 +1027,7 @@ enum ieee80211_eid { WLAN_EID_HT_INFORMATION = 61, /* 802.11i */ WLAN_EID_RSN = 48, + WLAN_EID_MMIE = 76 /* 802.11w */, WLAN_EID_WPA = 221, WLAN_EID_GENERIC = 221, WLAN_EID_VENDOR_SPECIFIC = 221, -- cgit v1.2.3 From 3cfcf6ac6d69dc290e96416731eea5c88ac7d426 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Thu, 8 Jan 2009 13:32:02 +0200 Subject: mac80211: 802.11w - Use BIP (AES-128-CMAC) Add mechanism for managing BIP keys (IGTK) and integrate BIP into the TX/RX paths. Signed-off-by: Jouni Malinen Acked-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 1 + include/linux/nl80211.h | 6 ++++-- include/net/cfg80211.h | 5 +++++ include/net/mac80211.h | 2 ++ 4 files changed, 12 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index cceb9e86c744..df98a8a549a2 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1139,6 +1139,7 @@ enum ieee80211_back_parties { /* reserved: 0x000FAC03 */ #define WLAN_CIPHER_SUITE_CCMP 0x000FAC04 #define WLAN_CIPHER_SUITE_WEP104 0x000FAC05 +#define WLAN_CIPHER_SUITE_AES_CMAC 0x000FAC06 #define WLAN_MAX_KEY_LEN 32 diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 218f0e73a7ae..ee742bc9761e 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -72,8 +72,8 @@ * * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC. - * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT or - * %NL80211_ATTR_KEY_THRESHOLD. + * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT, + * %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD. * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA, * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC and %NL80211_ATTR_KEY_CIPHER * attributes. @@ -346,6 +346,8 @@ enum nl80211_attrs { NL80211_ATTR_WIPHY_FREQ, NL80211_ATTR_WIPHY_CHANNEL_TYPE, + NL80211_ATTR_KEY_DEFAULT_MGMT, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 6619ed106134..df78abc496f1 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -473,6 +473,8 @@ struct ieee80211_channel; * * @set_default_key: set the default key on an interface * + * @set_default_mgmt_key: set the default management frame key on an interface + * * @add_beacon: Add a beacon with given parameters, @head, @interval * and @dtim_period will be valid, @tail is optional. * @set_beacon: Change the beacon parameters for an access point mode @@ -520,6 +522,9 @@ struct cfg80211_ops { int (*set_default_key)(struct wiphy *wiphy, struct net_device *netdev, u8 key_index); + int (*set_default_mgmt_key)(struct wiphy *wiphy, + struct net_device *netdev, + u8 key_index); int (*add_beacon)(struct wiphy *wiphy, struct net_device *dev, struct beacon_parameters *info); diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 8a305bfdb87b..61f1f37a9e27 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -651,11 +651,13 @@ struct ieee80211_if_conf { * @ALG_WEP: WEP40 or WEP104 * @ALG_TKIP: TKIP * @ALG_CCMP: CCMP (AES) + * @ALG_AES_CMAC: AES-128-CMAC */ enum ieee80211_key_alg { ALG_WEP, ALG_TKIP, ALG_CCMP, + ALG_AES_CMAC, }; /** -- cgit v1.2.3 From 54604d3a827b37525ef017adba313c7112e0f484 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Thu, 8 Jan 2009 13:32:03 +0200 Subject: mac80211: 802.11w - WEXT parameter for setting mgmt cipher Add a new IW_AUTH parameter for setting cipher suite for multicast/broadcast management frames. This is for full-mac drivers that take care of RSN IE generation for (re)association request frames. Signed-off-by: Jouni Malinen Acked-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/wireless.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/wireless.h b/include/linux/wireless.h index d7958f9b52cb..d426dce47e7c 100644 --- a/include/linux/wireless.h +++ b/include/linux/wireless.h @@ -577,18 +577,21 @@ #define IW_AUTH_RX_UNENCRYPTED_EAPOL 8 #define IW_AUTH_ROAMING_CONTROL 9 #define IW_AUTH_PRIVACY_INVOKED 10 +#define IW_AUTH_CIPHER_GROUP_MGMT 11 /* IW_AUTH_WPA_VERSION values (bit field) */ #define IW_AUTH_WPA_VERSION_DISABLED 0x00000001 #define IW_AUTH_WPA_VERSION_WPA 0x00000002 #define IW_AUTH_WPA_VERSION_WPA2 0x00000004 -/* IW_AUTH_PAIRWISE_CIPHER and IW_AUTH_GROUP_CIPHER values (bit field) */ +/* IW_AUTH_PAIRWISE_CIPHER, IW_AUTH_GROUP_CIPHER, and IW_AUTH_CIPHER_GROUP_MGMT + * values (bit field) */ #define IW_AUTH_CIPHER_NONE 0x00000001 #define IW_AUTH_CIPHER_WEP40 0x00000002 #define IW_AUTH_CIPHER_TKIP 0x00000004 #define IW_AUTH_CIPHER_CCMP 0x00000008 #define IW_AUTH_CIPHER_WEP104 0x00000010 +#define IW_AUTH_CIPHER_AES_CMAC 0x00000020 /* IW_AUTH_KEY_MGMT values (bit field) */ #define IW_AUTH_KEY_MGMT_802_1X 1 -- cgit v1.2.3 From 22787dbaa3b952602542506e0426ea6d5f104042 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Thu, 8 Jan 2009 13:32:04 +0200 Subject: mac80211: 802.11w - WEXT configuration for IGTK Added new SIOCSIWENCODEEXT algorithm for configuring BIP (AES-CMAC) keys (IGTK). Signed-off-by: Jouni Malinen Acked-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/wireless.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/wireless.h b/include/linux/wireless.h index d426dce47e7c..5d1f3fbffd77 100644 --- a/include/linux/wireless.h +++ b/include/linux/wireless.h @@ -615,6 +615,7 @@ #define IW_ENCODE_ALG_TKIP 2 #define IW_ENCODE_ALG_CCMP 3 #define IW_ENCODE_ALG_PMK 4 +#define IW_ENCODE_ALG_AES_CMAC 5 /* struct iw_encode_ext ->ext_flags */ #define IW_ENCODE_EXT_TX_SEQ_VALID 0x00000001 #define IW_ENCODE_EXT_RX_SEQ_VALID 0x00000002 -- cgit v1.2.3 From fdfacf0ae2e8339098b1164d2317b792d7662c0a Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Thu, 8 Jan 2009 13:32:05 +0200 Subject: mac80211: 802.11w - Configuration of MFP disabled/optional/required Add new WEXT IW_AUTH_* parameter for setting MFP disabled/optional/required. Signed-off-by: Jouni Malinen Acked-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/wireless.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include') diff --git a/include/linux/wireless.h b/include/linux/wireless.h index 5d1f3fbffd77..cb24204851f7 100644 --- a/include/linux/wireless.h +++ b/include/linux/wireless.h @@ -578,6 +578,7 @@ #define IW_AUTH_ROAMING_CONTROL 9 #define IW_AUTH_PRIVACY_INVOKED 10 #define IW_AUTH_CIPHER_GROUP_MGMT 11 +#define IW_AUTH_MFP 12 /* IW_AUTH_WPA_VERSION values (bit field) */ #define IW_AUTH_WPA_VERSION_DISABLED 0x00000001 @@ -607,6 +608,11 @@ #define IW_AUTH_ROAMING_DISABLE 1 /* user space program used for roaming * control */ +/* IW_AUTH_MFP (management frame protection) values */ +#define IW_AUTH_MFP_DISABLED 0 /* MFP disabled */ +#define IW_AUTH_MFP_OPTIONAL 1 /* MFP optional */ +#define IW_AUTH_MFP_REQUIRED 2 /* MFP required */ + /* SIOCSIWENCODEEXT definitions */ #define IW_ENCODE_SEQ_MAX_SIZE 8 /* struct iw_encode_ext ->alg */ -- cgit v1.2.3 From fea147328908b7e2bfcaf9dc4377909d5507ca35 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Thu, 8 Jan 2009 13:32:06 +0200 Subject: mac80211: 802.11w - SA Query processing Process SA Query Requests for client mode in mac80211. AP side processing of SA Query Response frames is in user space (hostapd). Signed-off-by: Jouni Malinen Acked-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'include') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index df98a8a549a2..9fe1948d28d3 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -527,6 +527,8 @@ struct ieee80211_tim_ie { u8 virtual_map[0]; } __attribute__ ((packed)); +#define WLAN_SA_QUERY_TR_ID_LEN 16 + struct ieee80211_mgmt { __le16 frame_control; __le16 duration; @@ -646,6 +648,10 @@ struct ieee80211_mgmt { u8 action_code; u8 variable[0]; } __attribute__((packed)) mesh_action; + struct { + u8 action; + u8 trans_id[WLAN_SA_QUERY_TR_ID_LEN]; + } __attribute__ ((packed)) sa_query; } u; } __attribute__ ((packed)) action; } u; @@ -1041,6 +1047,7 @@ enum ieee80211_category { WLAN_CATEGORY_DLS = 2, WLAN_CATEGORY_BACK = 3, WLAN_CATEGORY_PUBLIC = 4, + WLAN_CATEGORY_SA_QUERY = 8, WLAN_CATEGORY_WMM = 17, }; @@ -1129,6 +1136,13 @@ enum ieee80211_back_parties { WLAN_BACK_TIMER = 2, }; +/* SA Query action */ +enum ieee80211_sa_query_action { + WLAN_ACTION_SA_QUERY_REQUEST = 0, + WLAN_ACTION_SA_QUERY_RESPONSE = 1, +}; + + /* A-MSDU 802.11n */ #define IEEE80211_QOS_CONTROL_A_MSDU_PRESENT 0x0080 -- cgit v1.2.3 From 63a5ab82255a4ff5d0783f16427210f1d45d7ec8 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Thu, 8 Jan 2009 13:32:09 +0200 Subject: mac80211: 802.11w - Implement Association Comeback processing When MFP is enabled, the AP does not allow a STA to associate if an existing security association exists without first going through SA Query process. When this happens, the association request is denied with a new status code ("temporarily rejected") ans Association Comeback IE is used to notify when the association may be tried again (i.e., when the SA Query procedure has timed out). Use the comeback time to update the mac80211 client MLME timer for next association attempt to minimize waiting time if association is temporarily rejected. Signed-off-by: Jouni Malinen Acked-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 9fe1948d28d3..7800e20f197f 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -914,6 +914,9 @@ enum ieee80211_statuscode { /* 802.11g */ WLAN_STATUS_ASSOC_DENIED_NOSHORTTIME = 25, WLAN_STATUS_ASSOC_DENIED_NODSSSOFDM = 26, + /* 802.11w */ + WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY = 30, + WLAN_STATUS_ROBUST_MGMT_FRAME_POLICY_VIOLATION = 31, /* 802.11i */ WLAN_STATUS_INVALID_IE = 40, WLAN_STATUS_INVALID_GROUP_CIPHER = 41, @@ -1034,6 +1037,7 @@ enum ieee80211_eid { /* 802.11i */ WLAN_EID_RSN = 48, WLAN_EID_MMIE = 76 /* 802.11w */, + WLAN_EID_ASSOC_COMEBACK_TIME = 77, WLAN_EID_WPA = 221, WLAN_EID_GENERIC = 221, WLAN_EID_VENDOR_SPECIFIC = 221, -- cgit v1.2.3 From 1f7d77ab69789980dad44e1af7afd3a68cd48276 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Thu, 8 Jan 2009 13:32:10 +0200 Subject: mac80211: 802.11w - Optional software CCMP for management frames If driver/firmware/hardware does not support CCMP for management frames, it can now request mac80211 to take care of encrypting and decrypting management frames (when MFP is enabled) in software. The will need to add this new IEEE80211_KEY_FLAG_SW_MGMT flag when a CCMP key is being configured for TX side and return the undecrypted frames on RX side without RX_FLAG_DECRYPTED flag to use software CCMP for management frames (but hardware for data frames). Signed-off-by: Jouni Malinen Acked-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 61f1f37a9e27..00a50a38c7f2 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -686,12 +686,16 @@ enum ieee80211_key_len { * generation in software. * @IEEE80211_KEY_FLAG_PAIRWISE: Set by mac80211, this flag indicates * that the key is pairwise rather then a shared key. + * @IEEE80211_KEY_FLAG_SW_MGMT: This flag should be set by the driver for a + * CCMP key if it requires CCMP encryption of management frames (MFP) to + * be done in software. */ enum ieee80211_key_flags { IEEE80211_KEY_FLAG_WMM_STA = 1<<0, IEEE80211_KEY_FLAG_GENERATE_IV = 1<<1, IEEE80211_KEY_FLAG_GENERATE_MMIC= 1<<2, IEEE80211_KEY_FLAG_PAIRWISE = 1<<3, + IEEE80211_KEY_FLAG_SW_MGMT = 1<<4, }; /** -- cgit v1.2.3 From 4375d08350e3661d5e8860d33eea084e47ba01cf Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Thu, 8 Jan 2009 13:32:11 +0200 Subject: mac80211: 802.11w - Add driver capability flag for MFP This allows user space to determine whether a driver supports MFP and behave properly without having to ask user to configure this in MFP-optional mode. Signed-off-by: Jouni Malinen Acked-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 00a50a38c7f2..9bca2abbf038 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -865,6 +865,9 @@ enum ieee80211_tkip_key_type { * * @IEEE80211_HW_SUPPORTS_DYNAMIC_PS: * Hardware has support for dynamic PS. + * + * @IEEE80211_HW_MFP_CAPABLE: + * Hardware supports management frame protection (MFP, IEEE 802.11w). */ enum ieee80211_hw_flags { IEEE80211_HW_RX_INCLUDES_FCS = 1<<1, @@ -880,6 +883,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_SUPPORTS_PS = 1<<11, IEEE80211_HW_PS_NULLFUNC_STACK = 1<<12, IEEE80211_HW_SUPPORTS_DYNAMIC_PS = 1<<13, + IEEE80211_HW_MFP_CAPABLE = 1<<14, }; /** -- cgit v1.2.3 From 6dd1bf3118b62a3ce241dc2b7e05e3d4a28c9eb1 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Thu, 8 Jan 2009 21:00:34 -0500 Subject: mac80211: document return codes from ops callbacks For any callbacks in ieee80211_ops, specify what values the return codes represent. While at it, fix a couple of capitalization and punctuation differences. Signed-off-by: Bob Copeland Reviewed-by: Kalle Valo Signed-off-by: John W. Linville --- include/net/mac80211.h | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 9bca2abbf038..9a5869e9ecfa 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1217,6 +1217,8 @@ enum ieee80211_ampdu_mlme_action { * configuration in the TX control data. This handler should, * preferably, never fail and stop queues appropriately, more * importantly, however, it must never fail for A-MPDU-queues. + * This function should return NETDEV_TX_OK except in very + * limited cases. * Must be implemented and atomic. * * @start: Called before the first netdevice attached to the hardware @@ -1257,9 +1259,12 @@ enum ieee80211_ampdu_mlme_action { * * @config: Handler for configuration requests. IEEE 802.11 code calls this * function to change hardware configuration, e.g., channel. + * This function should never fail but returns a negative error code + * if it does. * * @config_interface: Handler for configuration requests related to interfaces * (e.g. BSSID changes.) + * Returns a negative error code which will be seen in userspace. * * @bss_info_changed: Handler for configuration requests related to BSS * parameters that may vary during BSS's lifespan, and may affect low @@ -1279,6 +1284,7 @@ enum ieee80211_ampdu_mlme_action { * This callback can sleep, and is only called between add_interface * and remove_interface calls, i.e. while the given virtual interface * is enabled. + * Returns a negative error code if the key can't be added. * * @update_tkip_key: See the section "Hardware crypto acceleration" * This callback will be called in the context of Rx. Called for drivers @@ -1290,8 +1296,10 @@ enum ieee80211_ampdu_mlme_action { * bands. When the scan finishes, ieee80211_scan_completed() must be * called; note that it also must be called when the scan cannot finish * because the hardware is turned off! Anything else is a bug! + * Returns a negative error code which will be seen in userspace. * - * @get_stats: return low-level statistics + * @get_stats: Return low-level statistics. + * Returns zero if statistics are available. * * @get_tkip_seq: If your device implements TKIP encryption in hardware this * callback should be provided to read the TKIP transmit IVs (both IV32 @@ -1305,6 +1313,7 @@ enum ieee80211_ampdu_mlme_action { * * @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max), * bursting) for a hardware TX queue. + * Returns a negative error code on failure. * * @get_tx_stats: Get statistics of the current TX queue status. This is used * to get number of currently queued packets (queue length), maximum queue @@ -1324,13 +1333,15 @@ enum ieee80211_ampdu_mlme_action { * @tx_last_beacon: Determine whether the last IBSS beacon was sent by us. * This is needed only for IBSS mode and the result of this function is * used to determine whether to reply to Probe Requests. + * Returns non-zero if this device sent the last beacon. * * @ampdu_action: Perform a certain A-MPDU action * The RA/TID combination determines the destination and TID we want * the ampdu action to be performed for. The action is defined through * ieee80211_ampdu_mlme_action. Starting sequence number (@ssn) - * is the first frame we expect to perform the action on. notice + * is the first frame we expect to perform the action on. Notice * that TX/RX_STOP can pass NULL for this parameter. + * Returns a negative error code on failure. */ struct ieee80211_ops { int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb); -- cgit v1.2.3 From d2b21f191753abd12c4063776cb1a3d635397509 Mon Sep 17 00:00:00 2001 From: Colin McCabe Date: Fri, 9 Jan 2009 14:58:09 -0800 Subject: libertas: if_spi, driver for libertas GSPI devices Add initial support for libertas devices using a GSPI interface. This has been tested with the 8686. GSPI is intended to be used on embedded systems. Board-specific parameters are required (see libertas_spi.h). Thanks to everyone who took a look at the earlier versions of the patch. Signed-off-by: Colin McCabe Signed-off-by: Andrey Yurovsky Acked-by: Dan Williams Signed-off-by: John W. Linville --- include/linux/spi/libertas_spi.h | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 include/linux/spi/libertas_spi.h (limited to 'include') diff --git a/include/linux/spi/libertas_spi.h b/include/linux/spi/libertas_spi.h new file mode 100644 index 000000000000..ada71b4f3788 --- /dev/null +++ b/include/linux/spi/libertas_spi.h @@ -0,0 +1,25 @@ +/* + * board-specific data for the libertas_spi driver. + * + * Copyright 2008 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ +#ifndef _LIBERTAS_SPI_H_ +#define _LIBERTAS_SPI_H_ +struct libertas_spi_platform_data { + /* There are two ways to read data from the WLAN module's SPI + * interface. Setting 0 or 1 here controls which one is used. + * + * Usually you want to set use_dummy_writes = 1. + * However, if that doesn't work or if you are using a slow SPI clock + * speed, you may want to use 0 here. */ + u16 use_dummy_writes; + + /* GPIO number to use as chip select */ + u16 gpio_cs; +}; +#endif -- cgit v1.2.3 From d03415e6771cd709b2b2ec64d3e6315cc3ebfa74 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Mon, 12 Jan 2009 14:24:40 +0200 Subject: nl80211: Fix documentation errors Couple of '_ATTR's were missing and SEC_CHAN_OFFSET to CHANNEL_TYPE rename was missed in couple of places. Signed-off-by: Jouni Malinen Acked-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index ee742bc9761e..4e7a7986a521 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -47,7 +47,7 @@ * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, and/or - * %NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET. + * %NL80211_ATTR_WIPHY_CHANNEL_TYPE. * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request * or rename notification. Has attributes %NL80211_ATTR_WIPHY and * %NL80211_ATTR_WIPHY_NAME. @@ -84,7 +84,7 @@ * %NL80222_CMD_NEW_BEACON message) * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface * using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD, - * %NL80211_BEACON_HEAD and %NL80211_BEACON_TAIL attributes. + * %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes. * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface, * parameters are like for %NL80211_CMD_SET_BEACON. * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it @@ -362,7 +362,7 @@ enum nl80211_attrs { #define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES #define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS #define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ -#define NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET +#define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE #define NL80211_MAX_SUPP_RATES 32 #define NL80211_MAX_SUPP_REG_RULES 32 -- cgit v1.2.3 From 9dbeb91a8b97e2892c04461e28d2bdd0198b719d Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Wed, 14 Jan 2009 20:17:08 +0100 Subject: ath9k: get EEPROM contents from platform data on AHB bus On the AR913x SOCs we have to provide EEPROM contents via platform_data, because accessing the flash via MMIO is not safe. Additionally different boards may store the radio calibration data at different locations. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos Signed-off-by: Imre Kaloz Tested-by: Pavel Roskin Signed-off-by: John W. Linville --- include/linux/ath9k_platform.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 include/linux/ath9k_platform.h (limited to 'include') diff --git a/include/linux/ath9k_platform.h b/include/linux/ath9k_platform.h new file mode 100644 index 000000000000..b847fc7b93f9 --- /dev/null +++ b/include/linux/ath9k_platform.h @@ -0,0 +1,28 @@ +/* + * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2009 Gabor Juhos + * Copyright (c) 2009 Imre Kaloz + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _LINUX_ATH9K_PLATFORM_H +#define _LINUX_ATH9K_PLATFORM_H + +#define ATH9K_PLAT_EEP_MAX_WORDS 2048 + +struct ath9k_platform_data { + u16 eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS]; +}; + +#endif /* _LINUX_ATH9K_PLATFORM_H */ -- cgit v1.2.3 From 9aed3cc124343d92be6697e9af3928bdfe8eb03e Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Tue, 13 Jan 2009 16:03:29 +0200 Subject: nl80211: New command for adding extra IE(s) into management frames A new nl80211 command, NL80211_CMD_SET_MGMT_EXTRA_IE, can be used to add arbitrary IE data into the end of management frames. The interface allows extra IEs to be configured for each management frame subtype, but only some of them (ProbeReq, ProbeResp, Auth, (Re)AssocReq, Deauth, Disassoc) are currently accepted in mac80211 implementation. This makes it easier to implement IEEE 802.11 extensions like WPS and FT that add IE(s) into some management frames. In addition, this can be useful for testing and experimentation purposes. Signed-off-by: Jouni Malinen Acked-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 22 ++++++++++++++++++++++ include/net/cfg80211.h | 26 ++++++++++++++++++++++++++ 2 files changed, 48 insertions(+) (limited to 'include') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 4e7a7986a521..76aae3d8e97e 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -133,6 +133,14 @@ * @NL80211_CMD_SET_MESH_PARAMS: Set mesh networking properties for the * interface identified by %NL80211_ATTR_IFINDEX * + * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The + * interface is identified with %NL80211_ATTR_IFINDEX and the management + * frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be + * added to the end of the specified management frame is specified with + * %NL80211_ATTR_IE. If the command succeeds, the requested data will be + * added to all specified management frames generated by + * kernel/firmware/driver. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -178,6 +186,8 @@ enum nl80211_commands { NL80211_CMD_GET_MESH_PARAMS, NL80211_CMD_SET_MESH_PARAMS, + NL80211_CMD_SET_MGMT_EXTRA_IE, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -190,6 +200,7 @@ enum nl80211_commands { * here */ #define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS +#define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE /** * enum nl80211_attrs - nl80211 netlink attributes @@ -284,6 +295,12 @@ enum nl80211_commands { * supported interface types, each a flag attribute with the number * of the interface mode. * + * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for + * %NL80211_CMD_SET_MGMT_EXTRA_IE. + * + * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with + * %NL80211_CMD_SET_MGMT_EXTRA_IE). + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -348,6 +365,9 @@ enum nl80211_attrs { NL80211_ATTR_KEY_DEFAULT_MGMT, + NL80211_ATTR_MGMT_SUBTYPE, + NL80211_ATTR_IE, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -363,6 +383,8 @@ enum nl80211_attrs { #define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS #define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ #define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE +#define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE +#define NL80211_ATTR_IE NL80211_ATTR_IE #define NL80211_MAX_SUPP_RATES 32 #define NL80211_MAX_SUPP_REG_RULES 32 diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index df78abc496f1..c7da88fb15b7 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -433,6 +433,26 @@ struct ieee80211_txq_params { u8 aifs; }; +/** + * struct mgmt_extra_ie_params - Extra management frame IE parameters + * + * Used to add extra IE(s) into management frames. If the driver cannot add the + * requested data into all management frames of the specified subtype that are + * generated in kernel or firmware/hardware, it must reject the configuration + * call. The IE data buffer is added to the end of the specified management + * frame body after all other IEs. This addition is not applied to frames that + * are injected through a monitor interface. + * + * @subtype: Management frame subtype + * @ies: IE data buffer or %NULL to remove previous data + * @ies_len: Length of @ies in octets + */ +struct mgmt_extra_ie_params { + u8 subtype; + u8 *ies; + int ies_len; +}; + /* from net/wireless.h */ struct wiphy; @@ -501,6 +521,8 @@ struct ieee80211_channel; * @set_txq_params: Set TX queue parameters * * @set_channel: Set channel + * + * @set_mgmt_extra_ie: Set extra IE data for management frames */ struct cfg80211_ops { int (*add_virtual_intf)(struct wiphy *wiphy, char *name, @@ -571,6 +593,10 @@ struct cfg80211_ops { int (*set_channel)(struct wiphy *wiphy, struct ieee80211_channel *chan, enum nl80211_channel_type channel_type); + + int (*set_mgmt_extra_ie)(struct wiphy *wiphy, + struct net_device *dev, + struct mgmt_extra_ie_params *params); }; /* temporary wext handlers */ -- cgit v1.2.3 From 0378b3f1c49d48ed524eabda7e4340163d9483c9 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 19 Jan 2009 11:20:52 -0500 Subject: cfg80211: add PM hooks This should help implement suspend/resume in mac80211, these hooks will be run before the device is suspended and after it resumes. Therefore, they can touch the hardware as much as they want to. Signed-off-by: Johannes Berg Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- include/net/cfg80211.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index c7da88fb15b7..f19c3e163663 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -472,6 +472,9 @@ struct ieee80211_channel; * wireless extensions but this is subject to reevaluation as soon as this * code is used more widely and we have a first user without wext. * + * @suspend: wiphy device needs to be suspended + * @resume: wiphy device needs to be resumed + * * @add_virtual_intf: create a new virtual interface with the given name, * must set the struct wireless_dev's iftype. * @@ -525,6 +528,9 @@ struct ieee80211_channel; * @set_mgmt_extra_ie: Set extra IE data for management frames */ struct cfg80211_ops { + int (*suspend)(struct wiphy *wiphy); + int (*resume)(struct wiphy *wiphy); + int (*add_virtual_intf)(struct wiphy *wiphy, char *name, enum nl80211_iftype type, u32 *flags, struct vif_params *params); -- cgit v1.2.3 From f797eb7e2903571e9c0e7e5d64113f51209f8dc4 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Mon, 19 Jan 2009 18:48:46 +0200 Subject: mac80211: Fix MFP Association Comeback to use Timeout Interval IE The separate Association Comeback Time IE was removed from IEEE 802.11w and the Timeout Interval IE (from IEEE 802.11r) is used instead. The editing on this is still somewhat incomplete in IEEE 802.11w/D7.0, but still, the use of Timeout Interval IE is the expected mechanism. Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 7800e20f197f..b1bb817d1427 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1036,8 +1036,8 @@ enum ieee80211_eid { WLAN_EID_HT_INFORMATION = 61, /* 802.11i */ WLAN_EID_RSN = 48, + WLAN_EID_TIMEOUT_INTERVAL = 56, WLAN_EID_MMIE = 76 /* 802.11w */, - WLAN_EID_ASSOC_COMEBACK_TIME = 77, WLAN_EID_WPA = 221, WLAN_EID_GENERIC = 221, WLAN_EID_VENDOR_SPECIFIC = 221, @@ -1126,6 +1126,12 @@ struct ieee80211_country_ie_triplet { }; } __attribute__ ((packed)); +enum ieee80211_timeout_interval_type { + WLAN_TIMEOUT_REASSOC_DEADLINE = 1 /* 802.11r */, + WLAN_TIMEOUT_KEY_LIFETIME = 2 /* 802.11r */, + WLAN_TIMEOUT_ASSOC_COMEBACK = 3 /* 802.11w */, +}; + /* BACK action code */ enum ieee80211_back_actioncode { WLAN_ACTION_ADDBA_REQ = 0, -- cgit v1.2.3 From 5f936f11613c32ca7f8ed5fa333bb38a4501deeb Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 21 Jan 2009 12:47:05 +0100 Subject: mac80211: constify ieee80211_if_conf.bssid Then one place can be a static const. Signed-off-by: Johannes Berg Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- include/net/mac80211.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 9a5869e9ecfa..ef42559694f1 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -643,7 +643,7 @@ enum ieee80211_if_conf_change { */ struct ieee80211_if_conf { u32 changed; - u8 *bssid; + const u8 *bssid; }; /** -- cgit v1.2.3 From 881d948c23442173a011f1adcfe4c95bf7f27515 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 21 Jan 2009 15:13:48 +0100 Subject: wireless: restrict to 32 legacy rates Since the standards only define 12 legacy rates, 32 is certainly a sane upper limit and we don't need to use u64 everywhere. Add sanity checking that no more than 32 rates are registered and change the variables to u32 throughout. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 4 ++-- include/net/wireless.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index ef42559694f1..c76484009baa 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -207,7 +207,7 @@ struct ieee80211_bss_conf { u16 beacon_int; u16 assoc_capability; u64 timestamp; - u64 basic_rates; + u32 basic_rates; struct ieee80211_bss_ht_conf ht; }; @@ -761,7 +761,7 @@ enum set_key_cmd { * sizeof(void *), size is determined in hw information. */ struct ieee80211_sta { - u64 supp_rates[IEEE80211_NUM_BANDS]; + u32 supp_rates[IEEE80211_NUM_BANDS]; u8 addr[ETH_ALEN]; u16 aid; struct ieee80211_sta_ht_cap ht_cap; diff --git a/include/net/wireless.h b/include/net/wireless.h index 9e73aae40c5d..6c5b08204232 100644 --- a/include/net/wireless.h +++ b/include/net/wireless.h @@ -367,7 +367,7 @@ ieee80211_get_channel(struct wiphy *wiphy, int freq) */ struct ieee80211_rate * ieee80211_get_response_rate(struct ieee80211_supported_band *sband, - u64 basic_rates, int bitrate); + u32 basic_rates, int bitrate); /** * regulatory_hint - driver hint to the wireless core a regulatory domain -- cgit v1.2.3 From 2134e7e724798cf8d54ae822afe235abb607d9b2 Mon Sep 17 00:00:00 2001 From: Sujith Date: Thu, 22 Jan 2009 09:00:52 +0530 Subject: mac80211: Add documentation bits for mac80211_rate_control_flags Signed-off-by: Sujith Acked-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index c76484009baa..634c08de6acb 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -262,6 +262,26 @@ enum mac80211_tx_control_flags { IEEE80211_TX_CTL_RATE_CTRL_PROBE = BIT(12), }; +/** + * enum mac80211_rate_control_flags - per-rate flags set by the + * Rate Control algorithm. + * + * These flags are set by the Rate control algorithm for each rate during tx, + * in the @flags member of struct ieee80211_tx_rate. + * + * @IEEE80211_TX_RC_USE_RTS_CTS: Use RTS/CTS exchange for this rate. + * @IEEE80211_TX_RC_USE_CTS_PROTECT: CTS-to-self protection is required. + * This is set if the current BSS requires ERP protection. + * @IEEE80211_TX_RC_USE_SHORT_PREAMBLE: Use short preamble. + * @IEEE80211_TX_RC_MCS: HT rate. + * @IEEE80211_TX_RC_GREEN_FIELD: Indicates whether this rate should be used in + * Greenfield mode. + * @IEEE80211_TX_RC_40_MHZ_WIDTH: Indicates if the Channel Width should be 40 MHz. + * @IEEE80211_TX_RC_DUP_DATA: The frame should be transmitted on both of the + * adjacent 20 MHz channels, if the current channel type is + * NL80211_CHAN_HT40MINUS or NL80211_CHAN_HT40PLUS. + * @IEEE80211_TX_RC_SHORT_GI: Short Guard interval should be used for this rate. + */ enum mac80211_rate_control_flags { IEEE80211_TX_RC_USE_RTS_CTS = BIT(0), IEEE80211_TX_RC_USE_CTS_PROTECT = BIT(1), -- cgit v1.2.3 From 078e1e60dd6c6b0d4bc8d58ccb80c008e8efc9ff Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 22 Jan 2009 18:07:31 +0100 Subject: mac80211: Add capability to enable/disable beaconing This patch adds a flag to notify drivers to start and stop beaconing when needed, for example, during a scan run. Based on Sujith's first patch to do the same, but now disables beaconing for all virtual interfaces while scanning, has a separate change flag and tracks user-space requests. Signed-off-by: Sujith Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 634c08de6acb..35643c55827a 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -646,10 +646,12 @@ struct ieee80211_if_init_conf { * @IEEE80211_IFCC_BSSID: The BSSID changed. * @IEEE80211_IFCC_BEACON: The beacon for this interface changed * (currently AP and MESH only), use ieee80211_beacon_get(). + * @IEEE80211_IFCC_BEACON_ENABLED: The enable_beacon value changed. */ enum ieee80211_if_conf_change { - IEEE80211_IFCC_BSSID = BIT(0), - IEEE80211_IFCC_BEACON = BIT(1), + IEEE80211_IFCC_BSSID = BIT(0), + IEEE80211_IFCC_BEACON = BIT(1), + IEEE80211_IFCC_BEACON_ENABLED = BIT(2), }; /** @@ -657,6 +659,8 @@ enum ieee80211_if_conf_change { * * @changed: parameters that have changed, see &enum ieee80211_if_conf_change. * @bssid: BSSID of the network we are associated to/creating. + * @enable_beacon: Indicates whether beacons can be sent. + * This is valid only for AP/IBSS/MESH modes. * * This structure is passed to the config_interface() callback of * &struct ieee80211_hw. @@ -664,6 +668,7 @@ enum ieee80211_if_conf_change { struct ieee80211_if_conf { u32 changed; const u8 *bssid; + bool enable_beacon; }; /** -- cgit v1.2.3 From 1fa25e413659f943dfec65da2abe713d566c7fdf Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 22 Jan 2009 15:05:44 -0800 Subject: cfg80211: add wiphy_apply_custom_regulatory() This adds wiphy_apply_custom_regulatory() to be used by drivers prior to wiphy registration to apply a custom regulatory domain. This can be used by drivers that do not have a direct 1-1 mapping between a regulatory domain and a country. Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- include/net/wireless.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'include') diff --git a/include/net/wireless.h b/include/net/wireless.h index 6c5b08204232..c5538b923afb 100644 --- a/include/net/wireless.h +++ b/include/net/wireless.h @@ -401,4 +401,21 @@ extern void regulatory_hint(struct wiphy *wiphy, const char *alpha2); extern void regulatory_hint_11d(struct wiphy *wiphy, u8 *country_ie, u8 country_ie_len); + +/** + * wiphy_apply_custom_regulatory - apply a custom driver regulatory domain + * @wiphy: the wireless device we want to process the regulatory domain on + * @regd: the custom regulatory domain to use for this wiphy + * + * Drivers can sometimes have custom regulatory domains which do not apply + * to a specific country. Drivers can use this to apply such custom regulatory + * domains. This routine must be called prior to wiphy registration. The + * custom regulatory domain will be trusted completely and as such previous + * default channel settings will be disregarded. If no rule is found for a + * channel on the regulatory domain the channel will be disabled. + */ +extern void wiphy_apply_custom_regulatory( + struct wiphy *wiphy, + const struct ieee80211_regdomain *regd); + #endif /* __NET_WIRELESS_H */ -- cgit v1.2.3 From 34f573473a659f8c2727d8d408e17b241900c28e Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 22 Jan 2009 15:05:45 -0800 Subject: cfg80211: export freq_reg_info() This can be used by drivers on the reg_notifier() Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- include/net/wireless.h | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'include') diff --git a/include/net/wireless.h b/include/net/wireless.h index c5538b923afb..f68602eb4160 100644 --- a/include/net/wireless.h +++ b/include/net/wireless.h @@ -418,4 +418,28 @@ extern void wiphy_apply_custom_regulatory( struct wiphy *wiphy, const struct ieee80211_regdomain *regd); +/** + * freq_reg_info - get regulatory information for the given frequency + * @wiphy: the wiphy for which we want to process this rule for + * @center_freq: Frequency in KHz for which we want regulatory information for + * @bandwidth: the bandwidth requirement you have in KHz, if you do not have one + * you can set this to 0. If this frequency is allowed we then set + * this value to the maximum allowed bandwidth. + * @reg_rule: the regulatory rule which we have for this frequency + * + * Use this function to get the regulatory rule for a specific frequency on + * a given wireless device. If the device has a specific regulatory domain + * it wants to follow we respect that unless a country IE has been received + * and processed already. + * + * Returns 0 if it was able to find a valid regulatory rule which does + * apply to the given center_freq otherwise it returns non-zero. It will + * also return -ERANGE if we determine the given center_freq does not even have + * a regulatory rule for a frequency range in the center_freq's band. See + * freq_in_rule_band() for our current definition of a band -- this is purely + * subjective and right now its 802.11 specific. + */ +extern int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 *bandwidth, + const struct ieee80211_reg_rule **reg_rule); + #endif /* __NET_WIRELESS_H */ -- cgit v1.2.3 From 2a44f911d8bac3e6c97a25cc612e4324dfbdfdc4 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 22 Jan 2009 15:05:49 -0800 Subject: cfg80211: rename fw_handles_regulatory to custom_regulatory Drivers without firmware can also have custom regulatory maps which do not map to a specific ISO / IEC alpha2 country code. Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- include/net/wireless.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/net/wireless.h b/include/net/wireless.h index f68602eb4160..c3f6e462ec2d 100644 --- a/include/net/wireless.h +++ b/include/net/wireless.h @@ -181,8 +181,8 @@ struct ieee80211_supported_band { * struct wiphy - wireless hardware description * @idx: the wiphy index assigned to this item * @class_dev: the class device representing /sys/class/ieee80211/ - * @fw_handles_regulatory: tells us the firmware for this device - * has its own regulatory solution and cannot identify the + * @custom_regulatory: tells us the driver for this device + * has its own custom regulatory domain and cannot identify the * ISO / IEC 3166 alpha2 it belongs to. When this is enabled * we will disregard the first regulatory hint (when the * initiator is %REGDOM_SET_BY_CORE). @@ -201,7 +201,7 @@ struct wiphy { /* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */ u16 interface_modes; - bool fw_handles_regulatory; + bool custom_regulatory; /* If multiple wiphys are registered and you're handed e.g. * a regular netdev with assigned ieee80211_ptr, you won't -- cgit v1.2.3 From 716f9392e2b84cacc18cc11f7427cb98adeb1c3d Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 22 Jan 2009 15:05:51 -0800 Subject: cfg80211: pass more detailed regulatory request information on reg_notifier() Drivers may need more information than just who set the last regulatory domain, as such lets just pass the last regulatory_request receipt. To do this we need to move out to headers struct regulatory_request, and enum environment_cap. While at it lets add documentation for enum environment_cap. Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- include/net/cfg80211.h | 45 +++++++++++++++++++++++++++++++++++++++++++++ include/net/wireless.h | 3 ++- 2 files changed, 47 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index f19c3e163663..dd1fd51638fc 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -357,6 +357,51 @@ enum reg_set_by { REGDOM_SET_BY_COUNTRY_IE, }; +/** + * enum environment_cap - Environment parsed from country IE + * @ENVIRON_ANY: indicates country IE applies to both indoor and + * outdoor operation. + * @ENVIRON_INDOOR: indicates country IE applies only to indoor operation + * @ENVIRON_OUTDOOR: indicates country IE applies only to outdoor operation + */ +enum environment_cap { + ENVIRON_ANY, + ENVIRON_INDOOR, + ENVIRON_OUTDOOR, +}; + +/** + * struct regulatory_request - receipt of last regulatory request + * + * @wiphy: this is set if this request's initiator is + * %REGDOM_SET_BY_COUNTRY_IE or %REGDOM_SET_BY_DRIVER. This + * can be used by the wireless core to deal with conflicts + * and potentially inform users of which devices specifically + * cased the conflicts. + * @initiator: indicates who sent this request, could be any of + * of those set in reg_set_by, %REGDOM_SET_BY_* + * @alpha2: the ISO / IEC 3166 alpha2 country code of the requested + * regulatory domain. We have a few special codes: + * 00 - World regulatory domain + * 99 - built by driver but a specific alpha2 cannot be determined + * 98 - result of an intersection between two regulatory domains + * @intersect: indicates whether the wireless core should intersect + * the requested regulatory domain with the presently set regulatory + * domain. + * @country_ie_checksum: checksum of the last processed and accepted + * country IE + * @country_ie_env: lets us know if the AP is telling us we are outdoor, + * indoor, or if it doesn't matter + */ +struct regulatory_request { + struct wiphy *wiphy; + enum reg_set_by initiator; + char alpha2[2]; + bool intersect; + u32 country_ie_checksum; + enum environment_cap country_ie_env; +}; + struct ieee80211_freq_range { u32 start_freq_khz; u32 end_freq_khz; diff --git a/include/net/wireless.h b/include/net/wireless.h index c3f6e462ec2d..9c19764a4849 100644 --- a/include/net/wireless.h +++ b/include/net/wireless.h @@ -213,7 +213,8 @@ struct wiphy { struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS]; /* Lets us get back the wiphy on the callback */ - int (*reg_notifier)(struct wiphy *wiphy, enum reg_set_by setby); + int (*reg_notifier)(struct wiphy *wiphy, + struct regulatory_request *request); /* fields below are read-only, assigned by cfg80211 */ -- cgit v1.2.3 From f976376de0d6a9697fb635369f12ae00251f4566 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 22 Jan 2009 15:05:52 -0800 Subject: cfg80211: Allow for strict regulatory settings This allows drivers to request strict regulatory settings to be applied to its devices. This is desirable for devices where proper calibration and compliance can only be gauranteed for for the device's programmed regulatory domain. Regulatory domain settings will be ignored until the device's own regulatory domain is properly configured. If no regulatory domain is received only the world regulatory domain will be applied -- if OLD_REG (default to "US") is not enabled. If OLD_REG behaviour is not acceptable to drivers they must update their wiphy with a custom reuglatory prior to wiphy registration. Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- include/net/wireless.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include') diff --git a/include/net/wireless.h b/include/net/wireless.h index 9c19764a4849..a42c1562d52b 100644 --- a/include/net/wireless.h +++ b/include/net/wireless.h @@ -186,6 +186,15 @@ struct ieee80211_supported_band { * ISO / IEC 3166 alpha2 it belongs to. When this is enabled * we will disregard the first regulatory hint (when the * initiator is %REGDOM_SET_BY_CORE). + * @strict_regulatory: tells us the driver for this device will ignore + * regulatory domain settings until it gets its own regulatory domain + * via its regulatory_hint(). After its gets its own regulatory domain + * it will only allow further regulatory domain settings to further + * enhance compliance. For example if channel 13 and 14 are disabled + * by this regulatory domain no user regulatory domain can enable these + * channels at a later time. This can be used for devices which do not + * have calibration information gauranteed for frequencies or settings + * outside of its regulatory domain. * @reg_notifier: the driver's regulatory notification callback * @regd: the driver's regulatory domain, if one was requested via * the regulatory_hint() API. This can be used by the driver @@ -202,6 +211,7 @@ struct wiphy { u16 interface_modes; bool custom_regulatory; + bool strict_regulatory; /* If multiple wiphys are registered and you're handed e.g. * a regular netdev with assigned ieee80211_ptr, you won't -- cgit v1.2.3 From 9a95371aa26e3cb9fb1340362912000088ff3c3e Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 22 Jan 2009 15:05:53 -0800 Subject: mac80211: allow mac80211 drivers to get to struct ieee80211_hw from wiphy If a driver is given a wiphy and it wants to get to its private mac80211 driver area it can use wiphy_to_ieee80211_hw() to get first to its ieee80211_hw and then access the private structure via hw->priv. The wiphy_priv() is already being used internally by mac80211 and drivers should not use this. This can be helpful in a drivers reg_notifier(). Signed-off-by: Luis R. Rodriguez Acked-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 35643c55827a..c1e8261e899e 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -989,6 +989,19 @@ struct ieee80211_hw { u8 max_rate_tries; }; +/** + * wiphy_to_ieee80211_hw - return a mac80211 driver hw struct from a wiphy + * + * @wiphy: the &struct wiphy which we want to query + * + * mac80211 drivers can use this to get to their respective + * &struct ieee80211_hw. Drivers wishing to get to their own private + * structure can then access it via hw->priv. Note that mac802111 drivers should + * not use wiphy_priv() to try to get their private driver structure as this + * is already used internally by mac80211. + */ +struct ieee80211_hw *wiphy_to_ieee80211_hw(struct wiphy *wiphy); + /** * SET_IEEE80211_DEV - set device for 802.11 hardware * -- cgit v1.2.3 From c771c9d8da1e8292ef8bf7fd4ce135dacc650130 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 23 Jan 2009 22:54:03 +0100 Subject: mac80211: add interface list lock Using only the RTNL has a number of problems, most notably that ieee80211_iterate_active_interfaces() and other interface list traversals cannot be done from the internal workqueue because it needs to be flushed under the RTNL. This patch introduces a new mutex that protects the interface list against modifications. A more detailed explanation is part of the code change. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index c1e8261e899e..8e65adf0a64c 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -928,9 +928,8 @@ enum ieee80211_hw_flags { * @workqueue: single threaded workqueue available for driver use, * allocated by mac80211 on registration and flushed when an * interface is removed. - * NOTICE: All work performed on this workqueue should NEVER - * acquire the RTNL lock (i.e. Don't use the function - * ieee80211_iterate_active_interfaces()) + * NOTICE: All work performed on this workqueue must not + * acquire the RTNL lock. * * @priv: pointer to private area that was allocated for driver use * along with this structure. -- cgit v1.2.3 From 3b5d665b51cda73ef1a774b515afd879a38e3674 Mon Sep 17 00:00:00 2001 From: Alina Friedrichsen Date: Sat, 24 Jan 2009 07:09:59 +0100 Subject: mac80211: Generic TSF debugging This patch enables low-level driver independent debugging of the TSF and remove the driver specific things of ath5k and ath9k from the debugfs. Signed-off-by: Alina Friedrichsen Signed-off-by: John W. Linville --- include/net/mac80211.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 8e65adf0a64c..e2144f0e8728 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1359,7 +1359,11 @@ enum ieee80211_ampdu_mlme_action { * hw->ampdu_queues items. * * @get_tsf: Get the current TSF timer value from firmware/hardware. Currently, - * this is only used for IBSS mode debugging and, as such, is not a + * this is only used for IBSS mode BSSID merging and debugging. Is not a + * required function. Must be atomic. + * + * @set_tsf: Set the TSF timer to the specified value in the firmware/hardware. + * Currently, this is only used for IBSS mode debugging. Is not a * required function. Must be atomic. * * @reset_tsf: Reset the TSF timer and allow firmware/hardware to synchronize @@ -1421,6 +1425,7 @@ struct ieee80211_ops { int (*get_tx_stats)(struct ieee80211_hw *hw, struct ieee80211_tx_queue_stats *stats); u64 (*get_tsf)(struct ieee80211_hw *hw); + void (*set_tsf)(struct ieee80211_hw *hw, u64 tsf); void (*reset_tsf)(struct ieee80211_hw *hw); int (*tx_last_beacon)(struct ieee80211_hw *hw); int (*ampdu_action)(struct ieee80211_hw *hw, -- cgit v1.2.3 From f677d7702d48b7b3dfcce3b2c0db601dbee0aa24 Mon Sep 17 00:00:00 2001 From: Tulio Magno Quites Machado Filho Date: Sun, 25 Jan 2009 23:54:25 +0100 Subject: ath5k: support LED's on emachines E510 notebook Add vendor ID for AMBIT and use it to set the ath5k LED gpio. base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Tulio Magno Quites Machado Filho Acked-by: Bob Copeland Signed-off-by: John W. Linville --- include/linux/pci_ids.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 5b7a48c1d616..b7697c934a49 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1967,6 +1967,8 @@ #define PCI_VENDOR_ID_SAMSUNG 0x144d +#define PCI_VENDOR_ID_AMBIT 0x1468 + #define PCI_VENDOR_ID_MYRICOM 0x14c1 #define PCI_VENDOR_ID_TITAN 0x14D2 -- cgit v1.2.3