From ad15e061fae0cd29943572fb68f8b375fd9ecacc Mon Sep 17 00:00:00 2001 From: vamsi krishna Date: Tue, 6 Dec 2016 18:06:40 +0530 Subject: cfg80211: Add support to update connection parameters Add functionality to update the connection parameters when in connected state, so that driver/firmware uses the updated parameters for subsequent roaming. This is for drivers that support internal BSS selection and roaming. The new command does not change the current association state, i.e., it can be used to update IE contents for future (re)associations without causing an immediate disassociation or reassociation with the current BSS. This commit implements the required functionality for updating IEs for (Re)Association Request frame only. Other parameters can be added in future when required. Signed-off-by: vamsi krishna Signed-off-by: Jouni Malinen Signed-off-by: Johannes Berg Git-commit: 088e8df82f91a24728d49d9532cab7ebdee5117f Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git Change-Id: I184b8e13bc5f7e2ed21e5337673c6ba82cd2f4fe CRs-Fixed: 1097836 [apati@codeaurora.org: backport to 4.4-This commit includes the changes from following commits in include/uapi/linux/nl80211.h to compile for msm-4.4. cb3b7d87652aeb37cfb5295a6157a3280dae10cb : cfg80211: add start / stop NAN commands. a442b761b24b6886f9a4e2ff5f8cb4824c96526b : cfg80211: add add_nan_func / del_nan_func. a5a9dcf291e1e541243878eed2d73a74006fa1f1 : cfg80211: allow the user space to change current NAN configuration. 50bcd31d9992e99c231820f5276e70346cbfbc51 : cfg80211: provide a function to report a match for NAN. ce0ce13a1c89ff8b94b7f8fb32eb4c43e111c82e : cfg80211: configure multicast to unicast for AP interfaces. c6e6a0c8be575c830a97b1942dabeab70f423fe0 : nl80211: Add API to support VHT MU-MIMO air sniffer. 1d76250bd34af86c6498fc51e50cab3bfbbeceaa : nl80211: support beacon report scanning. 7d27a0ba7adc8ef30c2aae7592fce4c162aee4df : cfg80211: Add mesh peer AID setting API. 348bd456699801920a309c66e382380809fbdf41 : cfg80211: Add KEK/nonces for FILS association frames.] Signed-off-by: Ashwini Patil --- include/uapi/linux/nl80211.h | 133 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 133 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 696a4322844a..40314b718a82 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -826,6 +826,47 @@ * not running. The driver indicates the status of the scan through * cfg80211_scan_done(). * + * @NL80211_CMD_START_NAN: Start NAN operation, identified by its + * %NL80211_ATTR_WDEV interface. This interface must have been previously + * created with %NL80211_CMD_NEW_INTERFACE. After it has been started, the + * NAN interface will create or join a cluster. This command must have a + * valid %NL80211_ATTR_NAN_MASTER_PREF attribute and optional + * %NL80211_ATTR_NAN_DUAL attributes. + * After this command NAN functions can be added. + * @NL80211_CMD_STOP_NAN: Stop the NAN operation, identified by + * its %NL80211_ATTR_WDEV interface. + * @NL80211_CMD_ADD_NAN_FUNCTION: Add a NAN function. The function is defined + * with %NL80211_ATTR_NAN_FUNC nested attribute. When called, this + * operation returns the strictly positive and unique instance id + * (%NL80211_ATTR_NAN_FUNC_INST_ID) and a cookie (%NL80211_ATTR_COOKIE) + * of the function upon success. + * Since instance ID's can be re-used, this cookie is the right + * way to identify the function. This will avoid races when a termination + * event is handled by the user space after it has already added a new + * function that got the same instance id from the kernel as the one + * which just terminated. + * This cookie may be used in NAN events even before the command + * returns, so userspace shouldn't process NAN events until it processes + * the response to this command. + * Look at %NL80211_ATTR_SOCKET_OWNER as well. + * @NL80211_CMD_DEL_NAN_FUNCTION: Delete a NAN function by cookie. + * This command is also used as a notification sent when a NAN function is + * terminated. This will contain a %NL80211_ATTR_NAN_FUNC_INST_ID + * and %NL80211_ATTR_COOKIE attributes. + * @NL80211_CMD_CHANGE_NAN_CONFIG: Change current NAN configuration. NAN + * must be operational (%NL80211_CMD_START_NAN was executed). + * It must contain at least one of the following attributes: + * %NL80211_ATTR_NAN_MASTER_PREF, %NL80211_ATTR_NAN_DUAL. + * @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported. + * This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and + * %NL80211_ATTR_COOKIE. + * + * @NL80211_CMD_UPDATE_CONNECT_PARAMS: Update one or more connect parameters + * for subsequent roaming cases if the driver or firmware uses internal + * BSS selection. This command can be issued only while connected and it + * does not result in a change for the current association. Currently, + * only the %NL80211_ATTR_IE data is used and updated with this command. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -1014,6 +1055,17 @@ enum nl80211_commands { NL80211_CMD_ABORT_SCAN, + NL80211_CMD_START_NAN, + NL80211_CMD_STOP_NAN, + NL80211_CMD_ADD_NAN_FUNCTION, + NL80211_CMD_DEL_NAN_FUNCTION, + NL80211_CMD_CHANGE_NAN_CONFIG, + NL80211_CMD_NAN_MATCH, + + NL80211_CMD_SET_MULTICAST_TO_UNICAST, + + NL80211_CMD_UPDATE_CONNECT_PARAMS, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1812,6 +1864,67 @@ enum nl80211_commands { * %NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities per * interface type. * + * @NL80211_ATTR_MU_MIMO_GROUP_DATA: array of 24 bytes that defines a MU-MIMO + * groupID for monitor mode. + * The first 8 bytes are a mask that defines the membership in each + * group (there are 64 groups, group 0 and 63 are reserved), + * each bit represents a group and set to 1 for being a member in + * that group and 0 for not being a member. + * The remaining 16 bytes define the position in each group: 2 bits for + * each group. + * (smaller group numbers represented on most significant bits and bigger + * group numbers on least significant bits.) + * This attribute is used only if all interfaces are in monitor mode. + * Set this attribute in order to monitor packets using the given MU-MIMO + * groupID data. + * to turn off that feature set all the bits of the groupID to zero. + * @NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR: mac address for the sniffer to follow + * when using MU-MIMO air sniffer. + * to turn that feature off set an invalid mac address + * (e.g. FF:FF:FF:FF:FF:FF) + * + * @NL80211_ATTR_SCAN_START_TIME_TSF: The time at which the scan was actually + * started (u64). The time is the TSF of the BSS the interface that + * requested the scan is connected to (if available, otherwise this + * attribute must not be included). + * @NL80211_ATTR_SCAN_START_TIME_TSF_BSSID: The BSS according to which + * %NL80211_ATTR_SCAN_START_TIME_TSF is set. + * @NL80211_ATTR_MEASUREMENT_DURATION: measurement duration in TUs (u16). If + * %NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY is not set, this is the + * maximum measurement duration allowed. This attribute is used with + * measurement requests. It can also be used with %NL80211_CMD_TRIGGER_SCAN + * if the scan is used for beacon report radio measurement. + * @NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY: flag attribute that indicates + * that the duration specified with %NL80211_ATTR_MEASUREMENT_DURATION is + * mandatory. If this flag is not set, the duration is the maximum duration + * and the actual measurement duration may be shorter. + * + * @NL80211_ATTR_MESH_PEER_AID: Association ID for the mesh peer (u16). This is + * used to pull the stored data for mesh peer in power save state. + * + * @NL80211_ATTR_NAN_MASTER_PREF: the master preference to be used by + * %NL80211_CMD_START_NAN and optionally with + * %NL80211_CMD_CHANGE_NAN_CONFIG. Its type is u8 and it can't be 0. + * Also, values 1 and 255 are reserved for certification purposes and + * should not be used during a normal device operation. + * @NL80211_ATTR_NAN_DUAL: NAN dual band operation config (see + * &enum nl80211_nan_dual_band_conf). This attribute is used with + * %NL80211_CMD_START_NAN and optionally with + * %NL80211_CMD_CHANGE_NAN_CONFIG. + * @NL80211_ATTR_NAN_FUNC: a function that can be added to NAN. See + * &enum nl80211_nan_func_attributes for description of this nested + * attribute. + * @NL80211_ATTR_NAN_MATCH: used to report a match. This is a nested attribute. + * See &enum nl80211_nan_match_attributes. + * @NL80211_ATTR_FILS_KEK: KEK for FILS (Re)Association Request/Response frame + * protection. + * @NL80211_ATTR_FILS_NONCES: Nonces (part of AAD) for FILS (Re)Association + * Request/Response frame protection. This attribute contains the 16 octet + * STA Nonce followed by 16 octets of AP Nonce. + * + * @NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED: Indicates whether or not multicast + * packets should be send out as unicast to all stations (flag attribute). + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -2196,6 +2309,26 @@ enum nl80211_attrs { NL80211_ATTR_IFTYPE_EXT_CAPA, + NL80211_ATTR_MU_MIMO_GROUP_DATA, + NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR, + + NL80211_ATTR_SCAN_START_TIME_TSF, + NL80211_ATTR_SCAN_START_TIME_TSF_BSSID, + NL80211_ATTR_MEASUREMENT_DURATION, + NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY, + + NL80211_ATTR_MESH_PEER_AID, + + NL80211_ATTR_NAN_MASTER_PREF, + NL80211_ATTR_NAN_DUAL, + NL80211_ATTR_NAN_FUNC, + NL80211_ATTR_NAN_MATCH, + + NL80211_ATTR_FILS_KEK, + NL80211_ATTR_FILS_NONCES, + + NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.3 From 8c59c22321c4de0375c2ff2762eb2e21fd9b5bfe Mon Sep 17 00:00:00 2001 From: Vamsi Krishna Date: Tue, 6 Dec 2016 19:34:13 +0530 Subject: nl80211: Use different attrs for BSSID and random MAC addr in scan req NL80211_ATTR_MAC was used to set both the specific BSSID to be scanned and the random MAC address to be used when privacy is enabled. When both the features are enabled, both the BSSID and the local MAC address were getting same value causing Probe Request frames to go with unintended DA. Hence, this has been fixed by using a different NL80211_ATTR_BSSID attribute to set the specific BSSID (which was the more recent addition in cfg80211) for a scan. Backwards compatibility with old userspace software is maintained to some extent by allowing NL80211_ATTR_MAC to be used to set the specific BSSID when scanning without enabling random MAC address use. Scanning with random source MAC address was introduced by commit ad2b26abc157 ("cfg80211: allow drivers to support random MAC addresses for scan") and the issue was introduced with the addition of the second user for the same attribute in commit 818965d39177 ("cfg80211: Allow a scan request for a specific BSSID"). Fixes: 818965d39177 ("cfg80211: Allow a scan request for a specific BSSID") Signed-off-by: Vamsi Krishna Signed-off-by: Jouni Malinen Signed-off-by: Johannes Berg Git-commit: 478b2a3b7faa4c50c54b2bd3a2507405fcf6fad8 Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git CRs-Fixed: 1097863 Change-Id: Ib55302c8fc9dbf2a4114a793e17f9b2dc9ade37c --- include/uapi/linux/nl80211.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 40314b718a82..253d17ae6a2f 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -322,7 +322,7 @@ * @NL80211_CMD_GET_SCAN: get scan results * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the - * probe requests at CCK rate or not. %NL80211_ATTR_MAC can be used to + * probe requests at CCK rate or not. %NL80211_ATTR_BSSID can be used to * specify a BSSID to scan for; if not included, the wildcard BSSID will * be used. * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to @@ -1925,6 +1925,9 @@ enum nl80211_commands { * @NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED: Indicates whether or not multicast * packets should be send out as unicast to all stations (flag attribute). * + * @NL80211_ATTR_BSSID: The BSSID of the AP. Note that %NL80211_ATTR_MAC is also + * used in various commands/events for specifying the BSSID. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -2329,6 +2332,8 @@ enum nl80211_attrs { NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED, + NL80211_ATTR_BSSID, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.3