From cf1c4a094f46ace5bf00078e2db73491ddf018fe Mon Sep 17 00:00:00 2001 From: Josh Hunt Date: Tue, 19 Feb 2013 11:35:59 -0800 Subject: netfilter: ipset: timeout values corrupted on set resize If a resize is triggered on a set with timeouts enabled, the timeout values will get corrupted when copying them to the new set. This occured b/c the wrong timeout value is supplied to type_pf_elem_tadd(). This also adds simple debug statement similar to the one in type_pf_resize(). Signed-off-by: Josh Hunt Signed-off-by: Jozsef Kadlecsik --- include/linux/netfilter/ipset/ip_set_ahash.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/netfilter/ipset/ip_set_ahash.h b/include/linux/netfilter/ipset/ip_set_ahash.h index ef9acd3c8450..01d25e6fc792 100644 --- a/include/linux/netfilter/ipset/ip_set_ahash.h +++ b/include/linux/netfilter/ipset/ip_set_ahash.h @@ -854,6 +854,8 @@ type_pf_tresize(struct ip_set *set, bool retried) retry: ret = 0; htable_bits++; + pr_debug("attempt to resize set %s from %u to %u, t %p\n", + set->name, orig->htable_bits, htable_bits, orig); if (!htable_bits) { /* In case we have plenty of memory :-) */ pr_warning("Cannot increase the hashsize of set %s further\n", @@ -873,7 +875,7 @@ retry: data = ahash_tdata(n, j); m = hbucket(t, HKEY(data, h->initval, htable_bits)); ret = type_pf_elem_tadd(m, data, AHASH_MAX(h), 0, - type_pf_data_timeout(data)); + ip_set_timeout_get(type_pf_data_timeout(data))); if (ret < 0) { read_unlock_bh(&set->lock); ahash_destroy(t); -- cgit v1.2.3 From 4d4c4e24cf48400a24d33feffc7cca4f4e8cabe1 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Fri, 22 Feb 2013 00:05:07 +0100 Subject: irq: Remove IRQ_EXIT_OFFSET workaround The IRQ_EXIT_OFFSET trick was used to make sure the irq doesn't get preempted after we substract the HARDIRQ_OFFSET until we are entirely done with any code in irq_exit(). This workaround was necessary because some archs may call irq_exit() with irqs enabled and there is still some code in the end of this function that is not covered by the HARDIRQ_OFFSET but want to stay non-preemptible. Now that irq are always disabled in irq_exit(), the whole code is guaranteed not to be preempted. We can thus remove this hack. Signed-off-by: Frederic Weisbecker Cc: Linus Torvalds Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Peter Zijlstra Cc: Paul E. McKenney --- include/linux/hardirq.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h index 29eb805ea4a6..c1d6555d2567 100644 --- a/include/linux/hardirq.h +++ b/include/linux/hardirq.h @@ -118,10 +118,8 @@ #ifdef CONFIG_PREEMPT_COUNT # define preemptible() (preempt_count() == 0 && !irqs_disabled()) -# define IRQ_EXIT_OFFSET (HARDIRQ_OFFSET-1) #else # define preemptible() 0 -# define IRQ_EXIT_OFFSET HARDIRQ_OFFSET #endif #if defined(CONFIG_SMP) || defined(CONFIG_GENERIC_HARDIRQS) -- cgit v1.2.3 From 46c498c2cdee5efe44f617bcd4f388179be36115 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 26 Feb 2013 18:44:33 +0100 Subject: stop_machine: Mark per cpu stopper enabled early commit 14e568e78 (stop_machine: Use smpboot threads) introduced the following regression: Before this commit the stopper enabled bit was set in the online notifier. CPU0 CPU1 cpu_up cpu online hotplug_notifier(ONLINE) stopper(CPU1)->enabled = true; ... stop_machine() The conversion to smpboot threads moved the enablement to the wakeup path of the parked thread. The majority of users seem to have the following working order: CPU0 CPU1 cpu_up cpu online unpark_threads() wakeup(stopper[CPU1]) .... stopper thread runs stopper(CPU1)->enabled = true; stop_machine() But Konrad and Sander have observed: CPU0 CPU1 cpu_up cpu online unpark_threads() wakeup(stopper[CPU1]) .... stop_machine() stopper thread runs stopper(CPU1)->enabled = true; Now the stop machinery kicks CPU0 into the stop loop, where it gets stuck forever because the queue code saw stopper(CPU1)->enabled == false, so CPU0 waits for CPU1 to enter stomp_machine, but the CPU1 stopper work got discarded due to enabled == false. Add a pre_unpark function to the smpboot thread descriptor and call it before waking the thread. This fixes the problem at hand, but the stop_machine code should be more robust. The stopper->enabled flag smells fishy at best. Thanks to Konrad for going through a loop of debug patches and providing the information to decode this issue. Reported-and-tested-by: Konrad Rzeszutek Wilk Reported-and-tested-by: Sander Eikelenboom Cc: Srivatsa S. Bhat Cc: Rusty Russell Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1302261843240.22263@ionos Signed-off-by: Thomas Gleixner --- include/linux/smpboot.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/smpboot.h b/include/linux/smpboot.h index c65dee059913..13e929679550 100644 --- a/include/linux/smpboot.h +++ b/include/linux/smpboot.h @@ -24,6 +24,9 @@ struct smpboot_thread_data; * parked (cpu offline) * @unpark: Optional unpark function, called when the thread is * unparked (cpu online) + * @pre_unpark: Optional unpark function, called before the thread is + * unparked (cpu online). This is not guaranteed to be + * called on the target cpu of the thread. Careful! * @selfparking: Thread is not parked by the park function. * @thread_comm: The base name of the thread */ @@ -37,6 +40,7 @@ struct smp_hotplug_thread { void (*cleanup)(unsigned int cpu, bool online); void (*park)(unsigned int cpu); void (*unpark)(unsigned int cpu); + void (*pre_unpark)(unsigned int cpu); bool selfparking; const char *thread_comm; }; -- cgit v1.2.3 From 9a886586c82aa02cb49f8c85e961595716884545 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 15 Feb 2013 19:25:00 +0100 Subject: wireless: move sequence number arithmetic to ieee80211.h Move the sequence number arithmetic code from mac80211 to ieee80211.h so others can use it. Also rename the functions from _seq to _sn, they operate on the sequence number, not the sequence_control field. Also move macros to convert the sequence control to/from the sequence number value from various drivers. Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 7e24fe0cfbcd..a0c550fb65a6 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -113,6 +113,34 @@ #define IEEE80211_CTL_EXT_SSW_FBACK 0x9000 #define IEEE80211_CTL_EXT_SSW_ACK 0xa000 + +#define IEEE80211_SN_MASK ((IEEE80211_SCTL_SEQ) >> 4) +#define IEEE80211_MAX_SN IEEE80211_SN_MASK +#define IEEE80211_SN_MODULO (IEEE80211_MAX_SN + 1) + +static inline int ieee80211_sn_less(u16 sn1, u16 sn2) +{ + return ((sn1 - sn2) & IEEE80211_SN_MASK) > (IEEE80211_SN_MODULO >> 1); +} + +static inline u16 ieee80211_sn_add(u16 sn1, u16 sn2) +{ + return (sn1 + sn2) & IEEE80211_SN_MASK; +} + +static inline u16 ieee80211_sn_inc(u16 sn) +{ + return ieee80211_sn_add(sn, 1); +} + +static inline u16 ieee80211_sn_sub(u16 sn1, u16 sn2) +{ + return (sn1 - sn2) & IEEE80211_SN_MASK; +} + +#define IEEE80211_SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4) +#define IEEE80211_SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ) + /* miscellaneous IEEE 802.11 constants */ #define IEEE80211_MAX_FRAG_THRESHOLD 2352 #define IEEE80211_MAX_RTS_THRESHOLD 2353 -- cgit v1.2.3 From b8a31c9a5afff257cc5dd637cda5fef03e12d67b Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 22 Feb 2013 17:28:49 +0100 Subject: ieee80211: mark 802.11 related structs as being 2-byte aligned Regardless of what header features they use, or if they align the IP header or not, 802.11 packets from all drivers guarantee a 2-byte alignment (and there's a debug WARN_ON in case they don't). Annotate packet structs with __aligned(2) to allow the compiler to use 16-bit load/store operations on platforms with extremely inefficient unaligned access (e.g. MIPS). This reduces code size and improves performance on affected platforms and causes no binary code change on others. Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index a0c550fb65a6..6e352c31fee0 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -213,7 +213,7 @@ struct ieee80211_hdr { u8 addr3[6]; __le16 seq_ctrl; u8 addr4[6]; -} __packed; +} __packed __aligned(2); struct ieee80211_hdr_3addr { __le16 frame_control; @@ -222,7 +222,7 @@ struct ieee80211_hdr_3addr { u8 addr2[6]; u8 addr3[6]; __le16 seq_ctrl; -} __packed; +} __packed __aligned(2); struct ieee80211_qos_hdr { __le16 frame_control; @@ -232,7 +232,7 @@ struct ieee80211_qos_hdr { u8 addr3[6]; __le16 seq_ctrl; __le16 qos_ctrl; -} __packed; +} __packed __aligned(2); /** * ieee80211_has_tods - check if IEEE80211_FCTL_TODS is set @@ -609,7 +609,7 @@ struct ieee80211s_hdr { __le32 seqnum; u8 eaddr1[6]; u8 eaddr2[6]; -} __packed; +} __packed __aligned(2); /* Mesh flags */ #define MESH_FLAGS_AE_A4 0x1 @@ -903,7 +903,7 @@ struct ieee80211_mgmt { } u; } __packed action; } u; -} __packed; +} __packed __aligned(2); /* Supported Rates value encodings in 802.11n-2009 7.3.2.2 */ #define BSS_MEMBERSHIP_SELECTOR_HT_PHY 127 @@ -934,20 +934,20 @@ struct ieee80211_rts { __le16 duration; u8 ra[6]; u8 ta[6]; -} __packed; +} __packed __aligned(2); struct ieee80211_cts { __le16 frame_control; __le16 duration; u8 ra[6]; -} __packed; +} __packed __aligned(2); struct ieee80211_pspoll { __le16 frame_control; __le16 aid; u8 bssid[6]; u8 ta[6]; -} __packed; +} __packed __aligned(2); /* TDLS */ -- cgit v1.2.3 From c8bb93f5f5d478a01db66127844d1d2dd30abec7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 21 Feb 2013 17:26:44 +0100 Subject: wireless: remove unused VHT MCS defines There's an enum with the same values (but slightly different names except for NOT_SUPPORTED) that is actually used, so remove the defines. Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 6e352c31fee0..35c1f96d9365 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1318,11 +1318,6 @@ struct ieee80211_vht_operation { } __packed; -#define IEEE80211_VHT_MCS_ZERO_TO_SEVEN_SUPPORT 0 -#define IEEE80211_VHT_MCS_ZERO_TO_EIGHT_SUPPORT 1 -#define IEEE80211_VHT_MCS_ZERO_TO_NINE_SUPPORT 2 -#define IEEE80211_VHT_MCS_NOT_SUPPORTED 3 - /* 802.11ac VHT Capabilities */ #define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895 0x00000000 #define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991 0x00000001 -- cgit v1.2.3 From 55d942f4246c79a8f3f17f92c224e641c5c26125 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 1 Mar 2013 13:07:48 +0100 Subject: mac80211: restrict peer's VHT capabilities to own Implement restricting peer VHT capabilities to the device's own capabilities. This is useful when a single driver supports more than one device and the devices have different capabilities (often they will differ in the number of spatial streams), but in particular is also necessary for VHT capability overrides to work correctly -- otherwise it'd be possible to e.g. advertise, due to overrides, that TX-STBC is not supported, but then still use it to TX to the AP because it supports RX-STBC. Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 35c1f96d9365..4cf0c9e4dd99 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1333,10 +1333,11 @@ struct ieee80211_vht_operation { #define IEEE80211_VHT_CAP_RXSTBC_2 0x00000200 #define IEEE80211_VHT_CAP_RXSTBC_3 0x00000300 #define IEEE80211_VHT_CAP_RXSTBC_4 0x00000400 +#define IEEE80211_VHT_CAP_RXSTBC_MASK 0x00000700 #define IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE 0x00000800 #define IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE 0x00001000 #define IEEE80211_VHT_CAP_BEAMFORMER_ANTENNAS_MAX 0x00006000 -#define IEEE80211_VHT_CAP_SOUNDING_DIMENTION_MAX 0x00030000 +#define IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MAX 0x00030000 #define IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE 0x00080000 #define IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE 0x00100000 #define IEEE80211_VHT_CAP_VHT_TXOP_PS 0x00200000 -- cgit v1.2.3 From 8524982847ff00b66ffb89314c342c51f4138ee7 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Mon, 18 Feb 2013 21:47:45 +0100 Subject: ssb: fix unaligned access to mac address The mac address should be aligned to u16 to prevent an unaligned access in drivers/ssb/pci.c where it is casted to __be16. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- include/linux/ssb/ssb.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h index 22958d68ecfe..8b1322296fed 100644 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -26,9 +26,9 @@ struct ssb_sprom_core_pwr_info { struct ssb_sprom { u8 revision; - u8 il0mac[6]; /* MAC address for 802.11b/g */ - u8 et0mac[6]; /* MAC address for Ethernet */ - u8 et1mac[6]; /* MAC address for 802.11a */ + u8 il0mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11b/g */ + u8 et0mac[6] __aligned(sizeof(u16)); /* MAC address for Ethernet */ + u8 et1mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11a */ u8 et0phyaddr; /* MII address for enet0 */ u8 et1phyaddr; /* MII address for enet1 */ u8 et0mdcport; /* MDIO for enet0 */ -- cgit v1.2.3 From 26fd76cab2e61cedc5c25f7151fb31b57ddc53c7 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Fri, 22 Feb 2013 10:53:25 +0100 Subject: NFC: llcp: Implement socket options Some LLCP services (e.g. the validation ones) require some control over the LLCP link parameters like the receive window (RW) or the MIU extension (MIUX). This can only be done through socket options. Signed-off-by: Samuel Ortiz --- include/linux/socket.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/socket.h b/include/linux/socket.h index 2b9f74b0ffea..428c37a1f95c 100644 --- a/include/linux/socket.h +++ b/include/linux/socket.h @@ -298,6 +298,7 @@ struct ucred { #define SOL_IUCV 277 #define SOL_CAIF 278 #define SOL_ALG 279 +#define SOL_NFC 280 /* IPX options */ #define IPX_TYPE 1 -- cgit v1.2.3