From 24b8b44780a2c53ecb738f4a1c08d114f5eda27c Mon Sep 17 00:00:00 2001 From: Tom Tucker Date: Wed, 13 Aug 2008 11:05:41 -0500 Subject: svcrdma: Fix race between svc_rdma_recvfrom thread and the dto_tasklet RDMA_READ completions are kept on a separate queue from the general I/O request queue. Since a separate lock is used to protect the RDMA_READ completion queue, a race exists between the dto_tasklet and the svc_rdma_recvfrom thread where the dto_tasklet sets the XPT_DATA bit and adds I/O to the read-completion queue. Concurrently, the recvfrom thread checks the generic queue, finds it empty and resets the XPT_DATA bit. A subsequent svc_xprt_enqueue will fail to enqueue the transport for I/O and cause the transport to "stall". The fix is to protect both lists with the same lock and set the XPT_DATA bit with this lock held. Signed-off-by: Tom Tucker Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/svc_rdma.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/svc_rdma.h b/include/linux/sunrpc/svc_rdma.h index ef2e3a20bf3b..dc05b54bd3a3 100644 --- a/include/linux/sunrpc/svc_rdma.h +++ b/include/linux/sunrpc/svc_rdma.h @@ -143,7 +143,6 @@ struct svcxprt_rdma { unsigned long sc_flags; struct list_head sc_dto_q; /* DTO tasklet I/O pending Q */ struct list_head sc_read_complete_q; - spinlock_t sc_read_complete_lock; struct work_struct sc_work; }; /* sc_flags */ -- cgit v1.2.3 From 89499759dc0dd300528510f465b0bf532fc79a2a Mon Sep 17 00:00:00 2001 From: Seth Heasley Date: Mon, 11 Aug 2008 17:01:50 -0700 Subject: x86/PCI: irq and pci_ids patch for Intel Ibex Peak PCHs This patch adds the Intel Ibex Peak (PCH) LPC and SMBus Controller DeviceIDs. Signed-off-by: Seth Heasley Signed-off-by: Jesse Barnes --- include/linux/pci_ids.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 9ec2bcce8e83..f1624b396754 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2428,6 +2428,9 @@ #define PCI_DEVICE_ID_INTEL_ICH10_3 0x3a1a #define PCI_DEVICE_ID_INTEL_ICH10_4 0x3a30 #define PCI_DEVICE_ID_INTEL_ICH10_5 0x3a60 +#define PCI_DEVICE_ID_INTEL_PCH_0 0x3b10 +#define PCI_DEVICE_ID_INTEL_PCH_1 0x3b11 +#define PCI_DEVICE_ID_INTEL_PCH_2 0x3b30 #define PCI_DEVICE_ID_INTEL_IOAT_SNB 0x402f #define PCI_DEVICE_ID_INTEL_5100_16 0x65f0 #define PCI_DEVICE_ID_INTEL_5100_21 0x65f5 -- cgit v1.2.3 From e3b99556975907530aeb9745e7b3945a0da48f17 Mon Sep 17 00:00:00 2001 From: Mark McLoughlin Date: Fri, 15 Aug 2008 15:09:56 -0700 Subject: tun: TUNGETIFF interface to query name and flags Add a TUNGETIFF interface so that userspace can query a tun/tap descriptor for its name and flags. This is needed because it is common for one app to create a tap interface, exec another app and pass it the file descriptor for the interface. Without TUNGETIFF the spawned app has no way of detecting wheter the interface has e.g. IFF_VNET_HDR set. Signed-off-by: Mark McLoughlin Acked-by: Max Krasnyansky Signed-off-by: David S. Miller --- include/linux/if_tun.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h index 4c6307ad9fdb..8529f57ba263 100644 --- a/include/linux/if_tun.h +++ b/include/linux/if_tun.h @@ -45,6 +45,7 @@ #define TUNGETFEATURES _IOR('T', 207, unsigned int) #define TUNSETOFFLOAD _IOW('T', 208, unsigned int) #define TUNSETTXFILTER _IOW('T', 209, unsigned int) +#define TUNGETIFF _IOR('T', 210, unsigned int) /* TUNSETIFF ifr flags */ #define IFF_TUN 0x0001 -- cgit v1.2.3 From db543c1f973cd1d557cc32ceee76737c1e4d2898 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 15 Aug 2008 15:13:53 -0700 Subject: net: skb_copy_datagram_from_iovec() There's an skb_copy_datagram_iovec() to copy out of a paged skb, but nothing the other way around (because we don't do that). We want to allocate big skbs in tun.c, so let's add the function. It's a carbon copy of skb_copy_datagram_iovec() with enough changes to be annoying. Signed-off-by: Rusty Russell Signed-off-by: David S. Miller --- include/linux/skbuff.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 358661c9990e..909923717830 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -1452,6 +1452,10 @@ extern int skb_copy_datagram_iovec(const struct sk_buff *from, extern int skb_copy_and_csum_datagram_iovec(struct sk_buff *skb, int hlen, struct iovec *iov); +extern int skb_copy_datagram_from_iovec(struct sk_buff *skb, + int offset, + struct iovec *from, + int len); extern void skb_free_datagram(struct sock *sk, struct sk_buff *skb); extern int skb_kill_datagram(struct sock *sk, struct sk_buff *skb, unsigned int flags); -- cgit v1.2.3 From 37014c64079748c47fd109ef2d91ecd785a8c764 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 18 Aug 2008 21:40:05 +0200 Subject: ata: add missing ATA_ID_* defines (take 2) Add missing ATA_ID_* defines and update {ata,atapi}_*() inlines accordingly. The currently unused defines are needed for the forthcoming drivers/ide/ changes. v2: Add ATA_ID_SPG. Acked-by: Jeff Garzik Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ata.h | 122 ++++++++++++++++++++++++++++++++-------------------- 1 file changed, 76 insertions(+), 46 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ata.h b/include/linux/ata.h index 1c622e2b0504..03fff6239b3c 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -46,18 +46,48 @@ enum { ATA_MAX_SECTORS_TAPE = 65535, ATA_ID_WORDS = 256, + ATA_ID_CONFIG = 0, + ATA_ID_CYLS = 1, + ATA_ID_HEADS = 3, + ATA_ID_SECTORS = 6, ATA_ID_SERNO = 10, + ATA_ID_BUF_SIZE = 21, ATA_ID_FW_REV = 23, ATA_ID_PROD = 27, + ATA_ID_MAX_MULTSECT = 47, + ATA_ID_DWORD_IO = 48, + ATA_ID_CAPABILITY = 49, ATA_ID_OLD_PIO_MODES = 51, + ATA_ID_OLD_DMA_MODES = 52, ATA_ID_FIELD_VALID = 53, + ATA_ID_CUR_CYLS = 54, + ATA_ID_CUR_HEADS = 55, + ATA_ID_CUR_SECTORS = 56, + ATA_ID_MULTSECT = 59, + ATA_ID_LBA_CAPACITY = 60, + ATA_ID_SWDMA_MODES = 62, ATA_ID_MWDMA_MODES = 63, ATA_ID_PIO_MODES = 64, ATA_ID_EIDE_DMA_MIN = 65, + ATA_ID_EIDE_DMA_TIME = 66, ATA_ID_EIDE_PIO = 67, ATA_ID_EIDE_PIO_IORDY = 68, - ATA_ID_UDMA_MODES = 88, + ATA_ID_QUEUE_DEPTH = 75, ATA_ID_MAJOR_VER = 80, + ATA_ID_COMMAND_SET_1 = 82, + ATA_ID_COMMAND_SET_2 = 83, + ATA_ID_CFSSE = 84, + ATA_ID_CFS_ENABLE_1 = 85, + ATA_ID_CFS_ENABLE_2 = 86, + ATA_ID_CSF_DEFAULT = 87, + ATA_ID_UDMA_MODES = 88, + ATA_ID_HW_CONFIG = 93, + ATA_ID_SPG = 98, + ATA_ID_LBA_CAPACITY_2 = 100, + ATA_ID_LAST_LUN = 126, + ATA_ID_DLF = 128, + ATA_ID_CSFO = 129, + ATA_ID_CFA_POWER = 160, ATA_ID_PIO4 = (1 << 1), ATA_ID_SERNO_LEN = 20, @@ -438,17 +468,17 @@ static inline int ata_is_data(u8 prot) /* * id tests */ -#define ata_id_is_ata(id) (((id)[0] & (1 << 15)) == 0) -#define ata_id_has_lba(id) ((id)[49] & (1 << 9)) -#define ata_id_has_dma(id) ((id)[49] & (1 << 8)) +#define ata_id_is_ata(id) (((id)[ATA_ID_CONFIG] & (1 << 15)) == 0) +#define ata_id_has_lba(id) ((id)[ATA_ID_CAPABILITY] & (1 << 9)) +#define ata_id_has_dma(id) ((id)[ATA_ID_CAPABILITY] & (1 << 8)) #define ata_id_has_ncq(id) ((id)[76] & (1 << 8)) -#define ata_id_queue_depth(id) (((id)[75] & 0x1f) + 1) -#define ata_id_removeable(id) ((id)[0] & (1 << 7)) +#define ata_id_queue_depth(id) (((id)[ATA_ID_QUEUE_DEPTH] & 0x1f) + 1) +#define ata_id_removeable(id) ((id)[ATA_ID_CONFIG] & (1 << 7)) #define ata_id_has_atapi_AN(id) \ ( (((id)[76] != 0x0000) && ((id)[76] != 0xffff)) && \ ((id)[78] & (1 << 5)) ) -#define ata_id_iordy_disable(id) ((id)[49] & (1 << 10)) -#define ata_id_has_iordy(id) ((id)[49] & (1 << 11)) +#define ata_id_iordy_disable(id) ((id)[ATA_ID_CAPABILITY] & (1 << 10)) +#define ata_id_has_iordy(id) ((id)[ATA_ID_CAPABILITY] & (1 << 11)) #define ata_id_u32(id,n) \ (((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)])) #define ata_id_u64(id,n) \ @@ -457,7 +487,7 @@ static inline int ata_is_data(u8 prot) ((u64) (id)[(n) + 1] << 16) | \ ((u64) (id)[(n) + 0]) ) -#define ata_id_cdb_intr(id) (((id)[0] & 0x60) == 0x20) +#define ata_id_cdb_intr(id) (((id)[ATA_ID_CONFIG] & 0x60) == 0x20) static inline bool ata_id_has_hipm(const u16 *id) { @@ -482,75 +512,75 @@ static inline bool ata_id_has_dipm(const u16 *id) static inline int ata_id_has_fua(const u16 *id) { - if ((id[84] & 0xC000) != 0x4000) + if ((id[ATA_ID_CFSSE] & 0xC000) != 0x4000) return 0; - return id[84] & (1 << 6); + return id[ATA_ID_CFSSE] & (1 << 6); } static inline int ata_id_has_flush(const u16 *id) { - if ((id[83] & 0xC000) != 0x4000) + if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000) return 0; - return id[83] & (1 << 12); + return id[ATA_ID_COMMAND_SET_2] & (1 << 12); } static inline int ata_id_has_flush_ext(const u16 *id) { - if ((id[83] & 0xC000) != 0x4000) + if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000) return 0; - return id[83] & (1 << 13); + return id[ATA_ID_COMMAND_SET_2] & (1 << 13); } static inline int ata_id_has_lba48(const u16 *id) { - if ((id[83] & 0xC000) != 0x4000) + if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000) return 0; - if (!ata_id_u64(id, 100)) + if (!ata_id_u64(id, ATA_ID_LBA_CAPACITY_2)) return 0; - return id[83] & (1 << 10); + return id[ATA_ID_COMMAND_SET_2] & (1 << 10); } static inline int ata_id_hpa_enabled(const u16 *id) { /* Yes children, word 83 valid bits cover word 82 data */ - if ((id[83] & 0xC000) != 0x4000) + if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000) return 0; /* And 87 covers 85-87 */ - if ((id[87] & 0xC000) != 0x4000) + if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000) return 0; /* Check command sets enabled as well as supported */ - if ((id[85] & ( 1 << 10)) == 0) + if ((id[ATA_ID_CFS_ENABLE_1] & (1 << 10)) == 0) return 0; - return id[82] & (1 << 10); + return id[ATA_ID_COMMAND_SET_1] & (1 << 10); } static inline int ata_id_has_wcache(const u16 *id) { /* Yes children, word 83 valid bits cover word 82 data */ - if ((id[83] & 0xC000) != 0x4000) + if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000) return 0; - return id[82] & (1 << 5); + return id[ATA_ID_COMMAND_SET_1] & (1 << 5); } static inline int ata_id_has_pm(const u16 *id) { - if ((id[83] & 0xC000) != 0x4000) + if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000) return 0; - return id[82] & (1 << 3); + return id[ATA_ID_COMMAND_SET_1] & (1 << 3); } static inline int ata_id_rahead_enabled(const u16 *id) { - if ((id[87] & 0xC000) != 0x4000) + if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000) return 0; - return id[85] & (1 << 6); + return id[ATA_ID_CFS_ENABLE_1] & (1 << 6); } static inline int ata_id_wcache_enabled(const u16 *id) { - if ((id[87] & 0xC000) != 0x4000) + if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000) return 0; - return id[85] & (1 << 5); + return id[ATA_ID_CFS_ENABLE_1] & (1 << 5); } /** @@ -581,7 +611,7 @@ static inline unsigned int ata_id_major_version(const u16 *id) static inline int ata_id_is_sata(const u16 *id) { - return ata_id_major_version(id) >= 5 && id[93] == 0; + return ata_id_major_version(id) >= 5 && id[ATA_ID_HW_CONFIG] == 0; } static inline int ata_id_has_tpm(const u16 *id) @@ -599,7 +629,7 @@ static inline int ata_id_has_dword_io(const u16 *id) /* ATA 8 reuses this flag for "trusted" computing */ if (ata_id_major_version(id) > 7) return 0; - if (id[48] & (1 << 0)) + if (id[ATA_ID_DWORD_IO] & (1 << 0)) return 1; return 0; } @@ -608,22 +638,22 @@ static inline int ata_id_current_chs_valid(const u16 *id) { /* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command has not been issued to the device then the values of - id[54] to id[56] are vendor specific. */ - return (id[53] & 0x01) && /* Current translation valid */ - id[54] && /* cylinders in current translation */ - id[55] && /* heads in current translation */ - id[55] <= 16 && - id[56]; /* sectors in current translation */ + id[ATA_ID_CUR_CYLS] to id[ATA_ID_CUR_SECTORS] are vendor specific. */ + return (id[ATA_ID_FIELD_VALID] & 1) && /* Current translation valid */ + id[ATA_ID_CUR_CYLS] && /* cylinders in current translation */ + id[ATA_ID_CUR_HEADS] && /* heads in current translation */ + id[ATA_ID_CUR_HEADS] <= 16 && + id[ATA_ID_CUR_SECTORS]; /* sectors in current translation */ } static inline int ata_id_is_cfa(const u16 *id) { - u16 v = id[0]; - if (v == 0x848A) /* Standard CF */ + if (id[ATA_ID_CONFIG] == 0x848A) /* Standard CF */ return 1; /* Could be CF hiding as standard ATA */ - if (ata_id_major_version(id) >= 3 && id[82] != 0xFFFF && - (id[82] & ( 1 << 2))) + if (ata_id_major_version(id) >= 3 && + id[ATA_ID_COMMAND_SET_1] != 0xFFFF && + (id[ATA_ID_COMMAND_SET_1] & (1 << 2))) return 1; return 0; } @@ -632,21 +662,21 @@ static inline int ata_drive_40wire(const u16 *dev_id) { if (ata_id_is_sata(dev_id)) return 0; /* SATA */ - if ((dev_id[93] & 0xE000) == 0x6000) + if ((dev_id[ATA_ID_HW_CONFIG] & 0xE000) == 0x6000) return 0; /* 80 wire */ return 1; } static inline int ata_drive_40wire_relaxed(const u16 *dev_id) { - if ((dev_id[93] & 0x2000) == 0x2000) + if ((dev_id[ATA_ID_HW_CONFIG] & 0x2000) == 0x2000) return 0; /* 80 wire */ return 1; } static inline int atapi_cdb_len(const u16 *dev_id) { - u16 tmp = dev_id[0] & 0x3; + u16 tmp = dev_id[ATA_ID_CONFIG] & 0x3; switch (tmp) { case 0: return 12; case 1: return 16; @@ -656,7 +686,7 @@ static inline int atapi_cdb_len(const u16 *dev_id) static inline int atapi_command_packet_set(const u16 *dev_id) { - return (dev_id[0] >> 8) & 0x1f; + return (dev_id[ATA_ID_CONFIG] >> 8) & 0x1f; } static inline int atapi_id_dmadir(const u16 *dev_id) -- cgit v1.2.3 From 476d9894dde2da2c2b326d70b5bce5eccc593c8b Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 18 Aug 2008 21:40:05 +0200 Subject: ata: add missing ATA_CMD_* defines Add missing ATA_CMD_* defines to . Also add ATA_EXABYTE_ENABLE_NEST, SETFEATURES_AAM_* and ATA_SMART_* defines while at it. Partially based on earlier work by Chris Wedgwood. Acked-by: Chris Wedgwood Acked-by: Jeff Garzik Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ata.h | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ata.h b/include/linux/ata.h index 03fff6239b3c..cf4ef6d915ac 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -222,6 +222,13 @@ enum { ATA_CMD_PMP_WRITE = 0xE8, ATA_CMD_CONF_OVERLAY = 0xB1, ATA_CMD_SEC_FREEZE_LOCK = 0xF5, + ATA_CMD_SMART = 0xB0, + ATA_CMD_MEDIA_LOCK = 0xDE, + ATA_CMD_MEDIA_UNLOCK = 0xDF, + /* marked obsolete in the ATA/ATAPI-7 spec */ + ATA_CMD_RESTORE = 0x10, + /* EXABYTE specific */ + ATA_EXABYTE_ENABLE_NEST = 0xF0, /* READ_LOG_EXT pages */ ATA_LOG_SATA_NCQ = 0x10, @@ -262,6 +269,10 @@ enum { SETFEATURES_WC_ON = 0x02, /* Enable write cache */ SETFEATURES_WC_OFF = 0x82, /* Disable write cache */ + /* Enable/Disable Automatic Acoustic Management */ + SETFEATURES_AAM_ON = 0x42, + SETFEATURES_AAM_OFF = 0xC2, + SETFEATURES_SPINUP = 0x07, /* Spin-up drive */ SETFEATURES_SATA_ENABLE = 0x10, /* Enable use of SATA feature */ @@ -284,6 +295,15 @@ enum { ATA_DCO_IDENTIFY = 0xC2, ATA_DCO_SET = 0xC3, + /* feature values for SMART */ + ATA_SMART_ENABLE = 0xD8, + ATA_SMART_READ_VALUES = 0xD0, + ATA_SMART_READ_THRESHOLDS = 0xD1, + + /* password used in LBA Mid / LBA High for executing SMART commands */ + ATA_SMART_LBAM_PASS = 0x4F, + ATA_SMART_LBAH_PASS = 0xC2, + /* ATAPI stuff */ ATAPI_PKT_DMA = (1 << 0), ATAPI_DMADIR = (1 << 2), /* ATAPI data dir: -- cgit v1.2.3 From b59116205c54c89df9cc80721b59e1e8d14488f1 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 18 Aug 2008 21:40:05 +0200 Subject: ata: add missing ATA_* defines Add missing ATA_* defines to . Also add ATAPI_{LFS,EOM,ILI,IO,CODE} defines while at it. Cc: Jeff Garzik Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ata.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ata.h b/include/linux/ata.h index cf4ef6d915ac..1ce19c1ef0e9 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -153,13 +153,26 @@ enum { ATA_BUSY = (1 << 7), /* BSY status bit */ ATA_DRDY = (1 << 6), /* device ready */ ATA_DF = (1 << 5), /* device fault */ + ATA_DSC = (1 << 4), /* drive seek complete */ ATA_DRQ = (1 << 3), /* data request i/o */ + ATA_CORR = (1 << 2), /* corrected data error */ + ATA_IDX = (1 << 1), /* index */ ATA_ERR = (1 << 0), /* have an error */ ATA_SRST = (1 << 2), /* software reset */ ATA_ICRC = (1 << 7), /* interface CRC error */ + ATA_BBK = ATA_ICRC, /* pre-EIDE: block marked bad */ ATA_UNC = (1 << 6), /* uncorrectable media error */ + ATA_MC = (1 << 5), /* media changed */ ATA_IDNF = (1 << 4), /* ID not found */ + ATA_MCR = (1 << 3), /* media change requested */ ATA_ABORTED = (1 << 2), /* command aborted */ + ATA_TRK0NF = (1 << 1), /* track 0 not found */ + ATA_AMNF = (1 << 0), /* address mark not found */ + ATAPI_LFS = 0xF0, /* last failed sense */ + ATAPI_EOM = ATA_TRK0NF, /* end of media */ + ATAPI_ILI = ATA_AMNF, /* illegal length indication */ + ATAPI_IO = (1 << 1), + ATAPI_COD = (1 << 0), /* ATA command block registers */ ATA_REG_DATA = 0x00, -- cgit v1.2.3 From 056c58e8eb4d6765214757e541b68095e2eb2bd2 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 18 Aug 2008 20:22:54 +0200 Subject: PCI: add acpi_find_root_bridge_handle Consolidate finding of a root bridge and getting its handle to the one inline function. It's cut & pasted on multiple places. Use this new inline in those. Cc: kristen.c.accardi@intel.com Acked-by: Alex Chiang Signed-off-by: Jiri Slaby Signed-off-by: Jesse Barnes --- include/linux/pci-acpi.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h index 3ba25065fa96..8837928fbf33 100644 --- a/include/linux/pci-acpi.h +++ b/include/linux/pci-acpi.h @@ -57,6 +57,15 @@ static inline acpi_status pcie_osc_support_set(u32 flags) { return __pci_osc_support_set(flags, PCI_EXPRESS_ROOT_HID_STRING); } +static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev) +{ + /* Find root host bridge */ + while (pdev->bus->self) + pdev = pdev->bus->self; + + return acpi_get_pci_rootbridge_handle(pci_domain_nr(pdev->bus), + pdev->bus->number); +} #else #if !defined(AE_ERROR) typedef u32 acpi_status; @@ -66,6 +75,8 @@ static inline acpi_status pci_osc_control_set(acpi_handle handle, u32 flags) {return AE_ERROR;} static inline acpi_status pci_osc_support_set(u32 flags) {return AE_ERROR;} static inline acpi_status pcie_osc_support_set(u32 flags) {return AE_ERROR;} +static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev) +{ return NULL; } #endif #endif /* _PCI_ACPI_H_ */ -- cgit v1.2.3 From e4464facd6f1404c2baeb6798d71e34423e7aeaa Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Wed, 20 Aug 2008 14:58:23 +0100 Subject: Reserve NFS fileid values for btrfs Purely cosmetic for now, but we might as well get it merged ASAP. Signed-off-by: David Woodhouse Signed-off-by: Linus Torvalds --- include/linux/exportfs.h | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'include/linux') diff --git a/include/linux/exportfs.h b/include/linux/exportfs.h index f5abd1306638..27e772cefb6a 100644 --- a/include/linux/exportfs.h +++ b/include/linux/exportfs.h @@ -34,6 +34,27 @@ enum fid_type { */ FILEID_INO32_GEN_PARENT = 2, + /* + * 64 bit object ID, 64 bit root object ID, + * 32 bit generation number. + */ + FILEID_BTRFS_WITHOUT_PARENT = 0x4d, + + /* + * 64 bit object ID, 64 bit root object ID, + * 32 bit generation number, + * 64 bit parent object ID, 32 bit parent generation. + */ + FILEID_BTRFS_WITH_PARENT = 0x4e, + + /* + * 64 bit object ID, 64 bit root object ID, + * 32 bit generation number, + * 64 bit parent object ID, 32 bit parent generation, + * 64 bit parent root object ID. + */ + FILEID_BTRFS_WITH_PARENT_ROOT = 0x4f, + /* * 32 bit block number, 16 bit partition reference, * 16 bit unused, 32 bit generation number. -- cgit v1.2.3 From 2d70b68d42b5196a48ccb639e3797f097ef5bea3 Mon Sep 17 00:00:00 2001 From: Ken Chen Date: Wed, 20 Aug 2008 14:09:17 -0700 Subject: fix setpriority(PRIO_PGRP) thread iterator breakage When user calls sys_setpriority(PRIO_PGRP ...) on a NPTL style multi-LWP process, only the task leader of the process is affected, all other sibling LWP threads didn't receive the setting. The problem was that the iterator used in sys_setpriority() only iteartes over one task for each process, ignoring all other sibling thread. Introduce a new macro do_each_pid_thread / while_each_pid_thread to walk each thread of a process. Convert 4 call sites in {set/get}priority and ioprio_{set/get}. Signed-off-by: Ken Chen Cc: Oleg Nesterov Cc: Roland McGrath Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Jens Axboe Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/pid.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pid.h b/include/linux/pid.h index 22921ac4cfd9..d7e98ff8021e 100644 --- a/include/linux/pid.h +++ b/include/linux/pid.h @@ -161,4 +161,13 @@ pid_t pid_vnr(struct pid *pid); } \ } while (0) +#define do_each_pid_thread(pid, type, task) \ + do_each_pid_task(pid, type, task) { \ + struct task_struct *tg___ = task; \ + do { + +#define while_each_pid_thread(pid, type, task) \ + } while_each_thread(tg___, task); \ + task = tg___; \ + } while_each_pid_task(pid, type, task) #endif /* _LINUX_PID_H */ -- cgit v1.2.3 From 479db0bf408e65baa14d2a9821abfcbc0804b847 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Wed, 20 Aug 2008 14:09:18 -0700 Subject: mm: dirty page tracking race fix There is a race with dirty page accounting where a page may not properly be accounted for. clear_page_dirty_for_io() calls page_mkclean; then TestClearPageDirty. page_mkclean walks the rmaps for that page, and for each one it cleans and write protects the pte if it was dirty. It uses page_check_address to find the pte. That function has a shortcut to avoid the ptl if the pte is not present. Unfortunately, the pte can be switched to not-present then back to present by other code while holding the page table lock -- this should not be a signal for page_mkclean to ignore that pte, because it may be dirty. For example, powerpc64's set_pte_at will clear a previously present pte before setting it to the desired value. There may also be other code in core mm or in arch which do similar things. The consequence of the bug is loss of data integrity due to msync, and loss of dirty page accounting accuracy. XIP's __xip_unmap could easily also be unreliable (depending on the exact XIP locking scheme), which can lead to data corruption. Fix this by having an option to always take ptl to check the pte in page_check_address. It's possible to retain this optimization for page_referenced and try_to_unmap. Signed-off-by: Nick Piggin Cc: Jared Hulbert Cc: Carsten Otte Cc: Hugh Dickins Acked-by: Peter Zijlstra Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/rmap.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/rmap.h b/include/linux/rmap.h index 69407f85e10b..fed6f5e0b411 100644 --- a/include/linux/rmap.h +++ b/include/linux/rmap.h @@ -102,7 +102,7 @@ int try_to_unmap(struct page *, int ignore_refs); * Called from mm/filemap_xip.c to unmap empty zero page */ pte_t *page_check_address(struct page *, struct mm_struct *, - unsigned long, spinlock_t **); + unsigned long, spinlock_t **, int); /* * Used by swapoff to help locate where page is expected in vma. -- cgit v1.2.3 From d847471d063663b9f36927d265c66a270c0cfaab Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Wed, 20 Aug 2008 14:09:23 -0700 Subject: fbdefio: add set_page_dirty handler to deferred IO FB Fixes kernel BUG at lib/radix-tree.c:473. Previously the handler was incidentally provided by tmpfs but this was removed with: commit 14fcc23fdc78e9d32372553ccf21758a9bd56fa1 Author: Hugh Dickins Date: Mon Jul 28 15:46:19 2008 -0700 tmpfs: fix kernel BUG in shmem_delete_inode relying on this behaviour was incorrect in any case and the BUG also appeared when the device node was on an ext3 filesystem. v2: override a_ops at open() time rather than mmap() time to minimise races per AKPM's concerns. Signed-off-by: Ian Campbell Cc: Jaya Kumar Cc: Nick Piggin Cc: Peter Zijlstra Cc: Hugh Dickins Cc: Johannes Weiner Cc: Jeremy Fitzhardinge Cc: Kel Modderman Cc: Markus Armbruster Cc: Krzysztof Helt Cc: [14fcc23fd is in 2.6.25.14 and 2.6.26.1] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fb.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/fb.h b/include/linux/fb.h index 3b8870e32afd..531ccd5f5960 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -976,6 +976,9 @@ static inline void __fb_pad_aligned_buffer(u8 *dst, u32 d_pitch, /* drivers/video/fb_defio.c */ extern void fb_deferred_io_init(struct fb_info *info); +extern void fb_deferred_io_open(struct fb_info *info, + struct inode *inode, + struct file *file); extern void fb_deferred_io_cleanup(struct fb_info *info); extern int fb_deferred_io_fsync(struct file *file, struct dentry *dentry, int datasync); -- cgit v1.2.3 From 3c4fbe5e01d7e5309be5045e7ae0db20a049e6dc Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Wed, 20 Aug 2008 16:37:38 -0700 Subject: nohz: fix wrong event handler after online an offlined cpu On the tickless system(CONFIG_NO_HZ=y and CONFIG_HIGH_RES_TIMERS=n), after I made an offlined cpu online, I found this cpu's event handler was tick_handle_periodic, not tick_nohz_handler. After debuging, I found this bug was caused by the wrong tick mode. the tick mode is not changed to NOHZ_MODE_INACTIVE when the cpu is offline. This patch fixes this bug. Signed-off-by: Miao Xie Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar --- include/linux/tick.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/tick.h b/include/linux/tick.h index d3c02695dc5d..8cf8cfe2cc97 100644 --- a/include/linux/tick.h +++ b/include/linux/tick.h @@ -74,10 +74,13 @@ extern struct tick_device *tick_get_device(int cpu); extern int tick_init_highres(void); extern int tick_program_event(ktime_t expires, int force); extern void tick_setup_sched_timer(void); +# endif + +# if defined CONFIG_NO_HZ || defined CONFIG_HIGH_RES_TIMERS extern void tick_cancel_sched_timer(int cpu); # else static inline void tick_cancel_sched_timer(int cpu) { } -# endif /* HIGHRES */ +# endif # ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST extern struct tick_device *tick_get_broadcast_device(void); -- cgit v1.2.3 From bf9ca69fc8d19d4034391d3df4c35dccdef9d28c Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 30 Jul 2008 12:29:21 -0700 Subject: dev_printk(): constify the `dev' argument Add const markings to dev_name and dev_driver_string to make it clear that dev_printk doesn't modify dev. This is a prerequisite to adding more const markings to other functions make it clearer, which functions can modify dev and which can't. Signed-off-by: Jean Delvare Cc: Kay Sievers Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- include/linux/device.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/device.h b/include/linux/device.h index d24a47f80f9c..a701c1b5184c 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -406,7 +406,7 @@ struct device { /* Get the wakeup routines, which depend on struct device */ #include -static inline const char *dev_name(struct device *dev) +static inline const char *dev_name(const struct device *dev) { /* will be changed into kobject_name(&dev->kobj) in the near future */ return dev->bus_id; @@ -518,7 +518,7 @@ extern void device_shutdown(void); extern void sysdev_shutdown(void); /* debugging and troubleshooting/diagnostic helpers. */ -extern const char *dev_driver_string(struct device *dev); +extern const char *dev_driver_string(const struct device *dev); #define dev_printk(level, dev, format, arg...) \ printk(level "%s %s: " format , dev_driver_string(dev) , \ dev_name(dev) , ## arg) -- cgit v1.2.3 From c906a48adc74fc455378137ac5124b13e7030a15 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 30 May 2008 10:45:12 -0700 Subject: driver core: add init_name to struct device This gives us a way to handle both the bus_id and init_name values being used for a while during the transition period. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- include/linux/device.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/device.h b/include/linux/device.h index a701c1b5184c..4d8372d135df 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -358,6 +358,7 @@ struct device { struct kobject kobj; char bus_id[BUS_ID_SIZE]; /* position on parent bus */ + const char *init_name; /* initial name of the device */ struct device_type *type; unsigned uevent_suppress:1; -- cgit v1.2.3 From 55151d7daba185f94e9dc561a5a2ba36b5f647dd Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 12 Aug 2008 14:33:59 -0400 Subject: USB: Defer Set-Interface for suspended devices This patch (as1128) fixes one of the problems related to the new PM infrastructure. We are not allowed to register new child devices during the middle of a system sleep transition, but unbinding a USB driver causes the core to automatically install altsetting 0 and thereby create new endpoint pseudo-devices. The patch fixes this problem (and the related problem that installing altsetting 0 will fail if the device is suspended) by deferring the Set-Interface call until some later time when it is legal and can succeed. Possible later times are: when a new driver is being probed for the interface, and when the interface is being resumed. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- include/linux/usb.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb.h b/include/linux/usb.h index 0924cd9c30f6..94ac74aba6b6 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -110,6 +110,8 @@ enum usb_interface_condition { * @sysfs_files_created: sysfs attributes exist * @needs_remote_wakeup: flag set when the driver requires remote-wakeup * capability during autosuspend. + * @needs_altsetting0: flag set when a set-interface request for altsetting 0 + * has been deferred. * @needs_binding: flag set when the driver should be re-probed or unbound * following a reset or suspend operation it doesn't support. * @dev: driver model's view of this device @@ -162,6 +164,7 @@ struct usb_interface { unsigned is_active:1; /* the interface is not suspended */ unsigned sysfs_files_created:1; /* the sysfs attributes exist */ unsigned needs_remote_wakeup:1; /* driver requires remote wakeup */ + unsigned needs_altsetting0:1; /* switch to altsetting 0 is pending */ unsigned needs_binding:1; /* needs delayed unbind/rebind */ struct device dev; /* interface specific device info */ -- cgit v1.2.3 From 05944bdf6fadb5394710269df6770dde447b23ca Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 13 Aug 2008 20:19:09 +0900 Subject: libata: implement no[hs]rst force params Implement force params nohrst, nosrst and norst. This is to work around reset related problems and ease debugging. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/libata.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index 06b80337303b..5340d4c83fd9 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -163,6 +163,7 @@ enum { ATA_DEV_NONE = 9, /* no device */ /* struct ata_link flags */ + ATA_LFLAG_NO_HRST = (1 << 1), /* avoid hardreset */ ATA_LFLAG_NO_SRST = (1 << 2), /* avoid softreset */ ATA_LFLAG_ASSUME_ATA = (1 << 3), /* assume ATA class */ ATA_LFLAG_ASSUME_SEMB = (1 << 4), /* assume SEMB class */ -- cgit v1.2.3 From d127ea7b8643a93d14d1f3c542974407f14d3663 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 31 Jul 2008 16:09:34 +0900 Subject: libata: restore SControl on detach Save SControl during probing and restore it on detach. This prevents adjustments made by libata drivers to seep into the next driver which gets attached (be it a libata one or not). It's not clear whether SControl also needs to be restored on suspend. The next system to have control (ACPI or kexec'd kernel) would probably like to see the original SControl value but there's no guarantee that a link is gonna keep working after SControl is adjusted without a reset and adding a reset and modified recovery cycle soley for this is an overkill. For now, do it only for detach. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/libata.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index 5340d4c83fd9..80233fdc159f 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -647,6 +647,7 @@ struct ata_link { unsigned int flags; /* ATA_LFLAG_xxx */ + u32 saved_scontrol; /* SControl on probe */ unsigned int hw_sata_spd_limit; unsigned int sata_spd_limit; unsigned int sata_spd; /* current SATA PHY speed */ -- cgit v1.2.3 From b15b3ebae102f89c25ccbcae0b2099af312f2e82 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 1 Aug 2008 09:18:34 +0100 Subject: libata: Fix a large collection of DMA mode mismatches MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Dave Müller sent a diff for the pata_oldpiix that highlighted a problem where a lot of the ATA drivers assume dma_mode == 0 means "no DMA" while the core code uses 0xFF. This turns out to have other consequences such as code doing >= XFER_UDMA_0 also catching 0xFF as UDMAlots. Fortunately it doesn't generally affect set_dma_mode, although some drivers call back into their own set mode code from other points. Having been through the drivers I've added helpers for using_udma/using_mwdma dma_enabled so that people don't open code ranges that may change (eg if UDMA8 appears somewhere) Thanks to David for the initial bits [and added fix for pata_oldpiix from and signed-off-by Dave Mueller -jg] Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- include/linux/libata.h | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index 80233fdc159f..225bfc5bd9ec 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1429,6 +1429,28 @@ static inline unsigned long ata_deadline(unsigned long from_jiffies, return from_jiffies + msecs_to_jiffies(timeout_msecs); } +/* Don't open code these in drivers as there are traps. Firstly the range may + change in future hardware and specs, secondly 0xFF means 'no DMA' but is + > UDMA_0. Dyma ddreigiau */ + +static inline int ata_using_mwdma(struct ata_device *adev) +{ + if (adev->dma_mode >= XFER_MW_DMA_0 && adev->dma_mode <= XFER_MW_DMA_4) + return 1; + return 0; +} + +static inline int ata_using_udma(struct ata_device *adev) +{ + if (adev->dma_mode >= XFER_UDMA_0 && adev->dma_mode <= XFER_UDMA_7) + return 1; + return 0; +} + +static inline int ata_dma_enabled(struct ata_device *adev) +{ + return (adev->dma_mode == 0xFF ? 0 : 1); +} /************************************************************************** * PMP - drivers/ata/libata-pmp.c -- cgit v1.2.3 From 7a8fc9b248e77a4eab0613acf30a6811799786b3 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Sun, 17 Aug 2008 17:36:59 +0300 Subject: removed unused #include 's This patch lets the files using linux/version.h match the files that #include it. Signed-off-by: Adrian Bunk Signed-off-by: Linus Torvalds --- include/linux/fs_uart_pd.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/fs_uart_pd.h b/include/linux/fs_uart_pd.h index 809bb9ffc788..36b61ff39277 100644 --- a/include/linux/fs_uart_pd.h +++ b/include/linux/fs_uart_pd.h @@ -12,7 +12,6 @@ #ifndef FS_UART_PD_H #define FS_UART_PD_H -#include #include enum fs_uart_id { -- cgit v1.2.3 From e45b590b976465c258f3e2a6cc84573fc19e16d3 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 7 Aug 2008 23:49:07 +0200 Subject: [PATCH] change d_add_ci argument ordering As pointed out during review d_add_ci argument order should match d_add, so switch the dentry and inode arguments. Signed-off-by: Christoph Hellwig Signed-off-by: Al Viro --- include/linux/dcache.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/dcache.h b/include/linux/dcache.h index 07aa198f19ed..efba1de629ac 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -230,7 +230,7 @@ extern void d_delete(struct dentry *); extern struct dentry * d_alloc(struct dentry *, const struct qstr *); extern struct dentry * d_alloc_anon(struct inode *); extern struct dentry * d_splice_alias(struct inode *, struct dentry *); -extern struct dentry * d_add_ci(struct inode *, struct dentry *, struct qstr *); +extern struct dentry * d_add_ci(struct dentry *, struct inode *, struct qstr *); extern void shrink_dcache_sb(struct super_block *); extern void shrink_dcache_parent(struct dentry *); extern void shrink_dcache_for_umount(struct super_block *); -- cgit v1.2.3 From bf2002967775cbb233876d51ff94e8daa7e77858 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Tue, 26 Aug 2008 00:19:27 -0500 Subject: stop_machine: Remove deprecated stop_machine_run Everyone should be using stop_machine() now. The staged API transition helped life in linux-next. Signed-off-by: Rusty Russell --- include/linux/stop_machine.h | 19 +------------------ 1 file changed, 1 insertion(+), 18 deletions(-) (limited to 'include/linux') diff --git a/include/linux/stop_machine.h b/include/linux/stop_machine.h index f1cb0ba6d715..faf1519b5adc 100644 --- a/include/linux/stop_machine.h +++ b/include/linux/stop_machine.h @@ -3,16 +3,13 @@ /* "Bogolock": stop the entire machine, disable interrupts. This is a very heavy lock, which is equivalent to grabbing every spinlock (and more). So the "read" side to such a lock is anything which - diables preeempt. */ + disables preeempt. */ #include #include #include #if defined(CONFIG_STOP_MACHINE) && defined(CONFIG_SMP) -/* Deprecated, but useful for transition. */ -#define ALL_CPUS ~0U - /** * stop_machine: freeze the machine on all CPUs and run this function * @fn: the function to run @@ -50,18 +47,4 @@ static inline int stop_machine(int (*fn)(void *), void *data, return ret; } #endif /* CONFIG_SMP */ - -static inline int __deprecated stop_machine_run(int (*fn)(void *), void *data, - unsigned int cpu) -{ - /* If they don't care which cpu fn runs on, just pick one. */ - if (cpu == NR_CPUS) - return stop_machine(fn, data, NULL); - else if (cpu == ~0U) - return stop_machine(fn, data, &cpu_possible_map); - else { - cpumask_t cpus = cpumask_of_cpu(cpu); - return stop_machine(fn, data, &cpus); - } -} #endif /* _LINUX_STOP_MACHINE */ -- cgit v1.2.3 From 1327138e294ffda120a50c8f31d792addb196c79 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 6 Aug 2008 01:36:09 +0300 Subject: KVM: fix userspace ABI breakage The following part of commit 9ef621d3be56e1188300476a8102ff54f7b6793f (KVM: Support mixed endian machines) changed on the size of a struct that is exported to userspace: include/linux/kvm.h: @@ -318,14 +318,14 @@ struct kvm_trace_rec { __u32 vcpu_id; union { struct { - __u32 cycle_lo, cycle_hi; + __u64 cycle_u64; __u32 extra_u32[KVM_TRC_EXTRA_MAX]; } cycle; struct { __u32 extra_u32[KVM_TRC_EXTRA_MAX]; } nocycle; } u; -}; +} __attribute__((packed)); Packing a struct was the correct idea, but it packed the wrong struct. Signed-off-by: Adrian Bunk Signed-off-by: Avi Kivity --- include/linux/kvm.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 69511f74f912..70a30651cd12 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -320,12 +320,12 @@ struct kvm_trace_rec { struct { __u64 cycle_u64; __u32 extra_u32[KVM_TRC_EXTRA_MAX]; - } cycle; + } __attribute__((packed)) cycle; struct { __u32 extra_u32[KVM_TRC_EXTRA_MAX]; } nocycle; } u; -} __attribute__((packed)); +}; #define KVMIO 0xAE -- cgit v1.2.3 From 5770a3fb5f8544d40ae03b010318345cdd05d662 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Tue, 26 Aug 2008 15:29:22 +0100 Subject: Fix userspace export of Including in the user-visible part of this header has caused build regressions with headers from 2.6.27-rc. Move it down to the #ifdef __KERNEL__ part, which is the only place it's needed. Move some other kernel-only things down there too, while we're at it. Signed-off-by: David Woodhouse Signed-off-by: Linus Torvalds --- include/linux/net.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/net.h b/include/linux/net.h index 4a9a30f2d68f..6dc14a240042 100644 --- a/include/linux/net.h +++ b/include/linux/net.h @@ -18,16 +18,9 @@ #ifndef _LINUX_NET_H #define _LINUX_NET_H -#include #include -#include /* For O_CLOEXEC and O_NONBLOCK */ #include -struct poll_table_struct; -struct pipe_inode_info; -struct inode; -struct net; - #define NPROTO AF_MAX #define SYS_SOCKET 1 /* sys_socket(2) */ @@ -62,6 +55,13 @@ typedef enum { #ifdef __KERNEL__ #include #include +#include +#include /* For O_CLOEXEC and O_NONBLOCK */ + +struct poll_table_struct; +struct pipe_inode_info; +struct inode; +struct net; #define SOCK_ASYNC_NOSPACE 0 #define SOCK_ASYNC_WAITDATA 1 -- cgit v1.2.3 From abf5439370491dd6fbb4fe1a7939680d2a9bc9d4 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Sat, 16 Aug 2008 14:10:05 +0900 Subject: block: move cmdfilter from gendisk to request_queue cmd_filter works only for the block layer SG_IO with SCSI block devices. It breaks scsi/sg.c, bsg, and the block layer SG_IO with SCSI character devices (such as st). We hit a kernel crash with them. The problem is that cmd_filter code accesses to gendisk (having struct blk_scsi_cmd_filter) via inode->i_bdev->bd_disk. It works for only SCSI block device files. With character device files, inode->i_bdev leads you to struct cdev. inode->i_bdev->bd_disk->blk_scsi_cmd_filter isn't safe. SCSI ULDs don't expose gendisk; they keep it private. bsg needs to be independent on any protocols. We shouldn't change ULDs to expose their gendisk. This patch moves struct blk_scsi_cmd_filter from gendisk to request_queue, a common object, which eveyone can access to. The user interface doesn't change; users can change the filters via /sys/block/. gendisk has a pointer to request_queue so the cmd_filter code accesses to struct blk_scsi_cmd_filter. Signed-off-by: FUJITA Tomonori Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 16 +++++++++++++--- include/linux/genhd.h | 10 ---------- 2 files changed, 13 insertions(+), 13 deletions(-) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index e61f22be4d0e..d2d34e2774b2 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -280,6 +280,15 @@ struct blk_queue_tag { atomic_t refcnt; /* map can be shared */ }; +#define BLK_SCSI_MAX_CMDS (256) +#define BLK_SCSI_CMD_PER_LONG (BLK_SCSI_MAX_CMDS / (sizeof(long) * 8)) + +struct blk_scsi_cmd_filter { + unsigned long read_ok[BLK_SCSI_CMD_PER_LONG]; + unsigned long write_ok[BLK_SCSI_CMD_PER_LONG]; + struct kobject kobj; +}; + struct request_queue { /* @@ -398,6 +407,7 @@ struct request_queue #if defined(CONFIG_BLK_DEV_BSG) struct bsg_class_device bsg_dev; #endif + struct blk_scsi_cmd_filter cmd_filter; }; #define QUEUE_FLAG_CLUSTER 0 /* cluster several segments into 1 */ @@ -833,11 +843,11 @@ extern int blkdev_issue_flush(struct block_device *, sector_t *); /* * command filter functions */ -extern int blk_verify_command(struct file *file, unsigned char *cmd); -extern int blk_cmd_filter_verify_command(struct blk_scsi_cmd_filter *filter, - unsigned char *cmd, mode_t *f_mode); +extern int blk_verify_command(struct blk_scsi_cmd_filter *filter, + unsigned char *cmd, int has_write_perm); extern int blk_register_filter(struct gendisk *disk); extern void blk_unregister_filter(struct gendisk *disk); +extern void blk_set_cmd_filter_defaults(struct blk_scsi_cmd_filter *filter); #define MAX_PHYS_SEGMENTS 128 #define MAX_HW_SEGMENTS 128 diff --git a/include/linux/genhd.h b/include/linux/genhd.h index 118216f1bd3c..be4f5e5bfe06 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -110,15 +110,6 @@ struct hd_struct { #define GENHD_FL_SUPPRESS_PARTITION_INFO 32 #define GENHD_FL_FAIL 64 -#define BLK_SCSI_MAX_CMDS (256) -#define BLK_SCSI_CMD_PER_LONG (BLK_SCSI_MAX_CMDS / (sizeof(long) * 8)) - -struct blk_scsi_cmd_filter { - unsigned long read_ok[BLK_SCSI_CMD_PER_LONG]; - unsigned long write_ok[BLK_SCSI_CMD_PER_LONG]; - struct kobject kobj; -}; - struct gendisk { int major; /* major number of driver */ int first_minor; @@ -128,7 +119,6 @@ struct gendisk { struct hd_struct **part; /* [indexed by minor] */ struct block_device_operations *fops; struct request_queue *queue; - struct blk_scsi_cmd_filter cmd_filter; void *private_data; sector_t capacity; -- cgit v1.2.3 From 4beab5c623fef4622f9a8593f85760ff10b5a3f7 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Sat, 26 Jul 2008 18:03:25 +0900 Subject: block: rename blk_scsi_cmd_filter to blk_cmd_filter Technically, the cmd_filter would be applied to other protocols though it's unlikely to happen. Putting SCSI stuff to request_queue is kinda layer violation. So let's rename it. Signed-off-by: FUJITA Tomonori Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index d2d34e2774b2..ab247d589ad6 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -283,7 +283,7 @@ struct blk_queue_tag { #define BLK_SCSI_MAX_CMDS (256) #define BLK_SCSI_CMD_PER_LONG (BLK_SCSI_MAX_CMDS / (sizeof(long) * 8)) -struct blk_scsi_cmd_filter { +struct blk_cmd_filter { unsigned long read_ok[BLK_SCSI_CMD_PER_LONG]; unsigned long write_ok[BLK_SCSI_CMD_PER_LONG]; struct kobject kobj; @@ -407,7 +407,7 @@ struct request_queue #if defined(CONFIG_BLK_DEV_BSG) struct bsg_class_device bsg_dev; #endif - struct blk_scsi_cmd_filter cmd_filter; + struct blk_cmd_filter cmd_filter; }; #define QUEUE_FLAG_CLUSTER 0 /* cluster several segments into 1 */ @@ -843,11 +843,11 @@ extern int blkdev_issue_flush(struct block_device *, sector_t *); /* * command filter functions */ -extern int blk_verify_command(struct blk_scsi_cmd_filter *filter, +extern int blk_verify_command(struct blk_cmd_filter *filter, unsigned char *cmd, int has_write_perm); extern int blk_register_filter(struct gendisk *disk); extern void blk_unregister_filter(struct gendisk *disk); -extern void blk_set_cmd_filter_defaults(struct blk_scsi_cmd_filter *filter); +extern void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter); #define MAX_PHYS_SEGMENTS 128 #define MAX_HW_SEGMENTS 128 -- cgit v1.2.3 From 5168c47b4c294412f079dd3cc891e0276bb0479e Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 26 Aug 2008 09:03:17 +0200 Subject: block: remove blk_queue_tag_depth() and blk_queue_tag_queue() They are unused and ->busy doesn't exist anymore. Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index ab247d589ad6..44710d7e7bff 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -817,8 +817,6 @@ extern void blk_put_queue(struct request_queue *); /* * tag stuff */ -#define blk_queue_tag_depth(q) ((q)->queue_tags->busy) -#define blk_queue_tag_queue(q) ((q)->queue_tags->busy < (q)->queue_tags->max_depth) #define blk_rq_tagged(rq) ((rq)->cmd_flags & REQ_QUEUED) extern int blk_queue_start_tag(struct request_queue *, struct request *); extern struct request *blk_queue_find_tag(struct request_queue *, int); -- cgit v1.2.3 From 96e21e4fbc1b83a3445553381ec74f904618562e Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 28 Aug 2008 08:33:23 +0200 Subject: i2c: Add missing kerneldoc descriptions Add missing kernel descriptions of struct i2c_driver members. Signed-off-by: Jean Delvare Acked-by: Randy Dunlap Cc: David Brownell --- include/linux/i2c.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/linux') diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 08be0d21864c..06115128047f 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -97,7 +97,19 @@ extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client, /** * struct i2c_driver - represent an I2C device driver + * @id: Unique driver ID (optional) * @class: What kind of i2c device we instantiate (for detect) + * @attach_adapter: Callback for bus addition (for legacy drivers) + * @detach_adapter: Callback for bus removal (for legacy drivers) + * @detach_client: Callback for device removal (for legacy drivers) + * @probe: Callback for device binding (new-style drivers) + * @remove: Callback for device unbinding (new-style drivers) + * @shutdown: Callback for device shutdown + * @suspend: Callback for device suspend + * @resume: Callback for device resume + * @command: Callback for bus-wide signaling (optional) + * @driver: Device driver model driver + * @id_table: List of I2C devices supported by this driver * @detect: Callback for device detection * @address_data: The I2C addresses to probe, ignore or force (for detect) * @clients: List of detected clients we created (for i2c-core use only) -- cgit v1.2.3 From 7c19a3d280297d43ef5ff7c6b205dc208a16d3d1 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 29 Aug 2008 14:37:23 -0700 Subject: net: Unbreak userspace usage of linux/mroute.h Nothing in linux/pim.h should be exported to userspace. This should fix the XORP build failure reported by Jose Calhariz, the debain package maintainer. Nothing originally in linux/mroute.h was exported to userspace ever, but some of this stuff started to be when it was moved into this new linux/pim.h, and that was wrong. If we didn't provide these definitions for 10 years we can reasonably expect that applications defined this stuff locally or used GLIBC headers providing the protocol definitions. And as such the only result of this can be conflict and userland build breakage. Signed-off-by: David S. Miller --- include/linux/Kbuild | 1 - include/linux/mroute.h | 2 +- include/linux/mroute6.h | 1 + include/linux/pim.h | 18 ------------------ 4 files changed, 2 insertions(+), 20 deletions(-) (limited to 'include/linux') diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 7d970678f940..59391250d51c 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -297,7 +297,6 @@ unifdef-y += parport.h unifdef-y += patchkey.h unifdef-y += pci.h unifdef-y += personality.h -unifdef-y += pim.h unifdef-y += pktcdvd.h unifdef-y += pmu.h unifdef-y += poll.h diff --git a/include/linux/mroute.h b/include/linux/mroute.h index 07112ee9293a..8a455694d682 100644 --- a/include/linux/mroute.h +++ b/include/linux/mroute.h @@ -6,7 +6,6 @@ #ifdef __KERNEL__ #include #endif -#include /* * Based on the MROUTING 3.5 defines primarily to keep @@ -130,6 +129,7 @@ struct igmpmsg */ #ifdef __KERNEL__ +#include #include #ifdef CONFIG_IP_MROUTE diff --git a/include/linux/mroute6.h b/include/linux/mroute6.h index 5cf50473a10f..6f4c180179e2 100644 --- a/include/linux/mroute6.h +++ b/include/linux/mroute6.h @@ -115,6 +115,7 @@ struct sioc_mif_req6 #ifdef __KERNEL__ +#include #include /* for struct sk_buff_head */ #ifdef CONFIG_IPV6_MROUTE diff --git a/include/linux/pim.h b/include/linux/pim.h index 236ffd317394..1ba0661561a4 100644 --- a/include/linux/pim.h +++ b/include/linux/pim.h @@ -3,22 +3,6 @@ #include -#ifndef __KERNEL__ -struct pim { -#if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 pim_type:4, /* PIM message type */ - pim_ver:4; /* PIM version */ -#elif defined(__BIG_ENDIAN_BITFIELD) - __u8 pim_ver:4; /* PIM version */ - pim_type:4; /* PIM message type */ -#endif - __u8 pim_rsv; /* Reserved */ - __be16 pim_cksum; /* Checksum */ -}; - -#define PIM_MINLEN 8 -#endif - /* Message types - V1 */ #define PIM_V1_VERSION __constant_htonl(0x10000000) #define PIM_V1_REGISTER 1 @@ -27,7 +11,6 @@ struct pim { #define PIM_VERSION 2 #define PIM_REGISTER 1 -#if defined(__KERNEL__) #define PIM_NULL_REGISTER __constant_htonl(0x40000000) /* PIMv2 register message header layout (ietf-draft-idmr-pimvsm-v2-00.ps */ @@ -42,4 +25,3 @@ struct pimreghdr struct sk_buff; extern int pim_rcv_v1(struct sk_buff *); #endif -#endif -- cgit v1.2.3 From bef69ea0dcce574a425feb0a5aa4c63dd108b9a6 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 29 Aug 2008 20:18:31 -0700 Subject: Resource handling: add 'insert_resource_expand_to_fit()' function Not used anywhere yet, but this complements the existing plain 'insert_resource()' functionality with a version that can expand the resource we are adding in order to fix up any conflicts it has with existing resources. Signed-off-by: Linus Torvalds --- include/linux/ioport.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/ioport.h b/include/linux/ioport.h index 22d2115458c6..8d3b7a9afd17 100644 --- a/include/linux/ioport.h +++ b/include/linux/ioport.h @@ -109,6 +109,7 @@ extern struct resource iomem_resource; extern int request_resource(struct resource *root, struct resource *new); extern int release_resource(struct resource *new); extern int insert_resource(struct resource *parent, struct resource *new); +extern void insert_resource_expand_to_fit(struct resource *root, struct resource *new); extern int allocate_resource(struct resource *root, struct resource *new, resource_size_t size, resource_size_t min, resource_size_t max, resource_size_t align, -- cgit v1.2.3 From 673d62cc5ea6fca046650f17f77985b112c62322 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Sun, 31 Aug 2008 23:39:21 +0200 Subject: debugobjects: fix lockdep warning Daniel J. Blueman reported: > ======================================================= > [ INFO: possible circular locking dependency detected ] > 2.6.27-rc4-224c #1 > ------------------------------------------------------- > hald/4680 is trying to acquire lock: > (&n->list_lock){++..}, at: [] add_partial+0x26/0x80 > > but task is already holding lock: > (&obj_hash[i].lock){++..}, at: [] > debug_object_free+0x5c/0x120 We fix it by moving the actual freeing to outside the lock (the lock now only protects the list). The pool lock is also promoted to irq-safe (suggested by Dan). It's necessary because free_pool is now called outside the irq disabled region. So we need to protect against an interrupt handler which calls debug_object_init(). [tglx@linutronix.de: added hlist_move_list helper to avoid looping through the list twice] Reported-by: Daniel J Blueman Signed-off-by: Vegard Nossum Signed-off-by: Thomas Gleixner --- include/linux/list.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'include/linux') diff --git a/include/linux/list.h b/include/linux/list.h index db35ef02e745..969f6e92d089 100644 --- a/include/linux/list.h +++ b/include/linux/list.h @@ -619,6 +619,19 @@ static inline void hlist_add_after(struct hlist_node *n, next->next->pprev = &next->next; } +/* + * Move a list from one list head to another. Fixup the pprev + * reference of the first entry if it exists. + */ +static inline void hlist_move_list(struct hlist_head *old, + struct hlist_head *new) +{ + new->first = old->first; + if (new->first) + new->first->pprev = &new->first; + old->first = NULL; +} + #define hlist_entry(ptr, type, member) container_of(ptr,type,member) #define hlist_for_each(pos, head) \ -- cgit v1.2.3 From 71fc9fcc70e6ad96215510c1dbcbade05cd95e41 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 2 Sep 2008 20:18:46 +0200 Subject: IDE: compile fix for sff_dma_ops The sff_dma_ops struct should be wrapped by BLK_DEV_IDEDMA_SFF instead of BLK_DEV_IDEDMA_PCI. Signed-off-by: Kevin Hilman Cc: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ide.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ide.h b/include/linux/ide.h index 87c12ed96954..fee4b157c533 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1111,7 +1111,6 @@ void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *); #ifdef CONFIG_BLK_DEV_IDEDMA_PCI int ide_pci_set_master(struct pci_dev *, const char *); unsigned long ide_pci_dma_base(ide_hwif_t *, const struct ide_port_info *); -extern const struct ide_dma_ops sff_dma_ops; int ide_pci_check_simplex(ide_hwif_t *, const struct ide_port_info *); int ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *); #else @@ -1275,6 +1274,7 @@ extern int __ide_dma_end(ide_drive_t *); int ide_dma_test_irq(ide_drive_t *); extern void ide_dma_lost_irq(ide_drive_t *); extern void ide_dma_timeout(ide_drive_t *); +extern const struct ide_dma_ops sff_dma_ops; #endif /* CONFIG_BLK_DEV_IDEDMA_SFF */ #else -- cgit v1.2.3 From 96f80219b738f84f90e449385bdede90f2910521 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 2 Sep 2008 20:18:47 +0200 Subject: ide: fix hwif_to_node() hwif_to_node() incorrectly assumes that hwif->dev always belongs to a PCI device. This results in ide-cs oopsing in init_irq() after commit c56c5648a3bd15ff14c50f284b261140cd5b5472 accidentally fixed device tree registration for ide-cs. Fix it by using dev_to_node(). Thanks to Martin Michlmayr and Larry Finger for help with debugging the issue. Reported-by: Martin Michlmayr Tested-by: Martin Michlmayr Cc: Larry Finger Cc: Dominik Brodowski Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ide.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ide.h b/include/linux/ide.h index fee4b157c533..1524829f73f2 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1448,8 +1448,7 @@ static inline void ide_dump_identify(u8 *id) static inline int hwif_to_node(ide_hwif_t *hwif) { - struct pci_dev *dev = to_pci_dev(hwif->dev); - return hwif->dev ? pcibus_to_node(dev->bus) : -1; + return hwif->dev ? dev_to_node(hwif->dev) : -1; } static inline ide_drive_t *ide_get_paired_drive(ide_drive_t *drive) -- cgit v1.2.3 From 4b8561521dbaa3d766b198496b220e984e3bf756 Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Tue, 2 Sep 2008 14:35:53 -0700 Subject: mm: show quicklist usage in /proc/meminfo Quicklists can consume several GB of memory. We should provide a means of monitoring this. After this patch is applied, /proc/meminfo will output the following: % cat /proc/meminfo MemTotal: 7715392 kB MemFree: 5401600 kB Buffers: 80384 kB Cached: 300800 kB SwapCached: 0 kB Active: 235584 kB Inactive: 262656 kB SwapTotal: 2031488 kB SwapFree: 2031488 kB Dirty: 3520 kB Writeback: 0 kB AnonPages: 117696 kB Mapped: 38528 kB Slab: 1589952 kB SReclaimable: 23104 kB SUnreclaim: 1566848 kB PageTables: 14656 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 5889152 kB Committed_AS: 393152 kB VmallocTotal: 17592177655808 kB VmallocUsed: 29056 kB VmallocChunk: 17592177626432 kB Quicklists: 130944 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 262144 kB Signed-off-by: KOSAKI Motohiro Cc: Christoph Lameter Cc: Keiichiro Tokunaga Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/quicklist.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/quicklist.h b/include/linux/quicklist.h index 39b66713a0bb..bd466439c588 100644 --- a/include/linux/quicklist.h +++ b/include/linux/quicklist.h @@ -80,6 +80,13 @@ void quicklist_trim(int nr, void (*dtor)(void *), unsigned long quicklist_total_size(void); +#else + +static inline unsigned long quicklist_total_size(void) +{ + return 0; +} + #endif #endif /* LINUX_QUICKLIST_H */ -- cgit v1.2.3 From f75c4950bb6e677e89479192b2ecfbec0beab14e Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 16:47:35 -0300 Subject: V4L/DVB (8675): gspca: Pixmap PJPG (Pixart 73xx JPEG) added, generated by pac7311. The JPEG frames generated by the Pixart 73xx have: - special markers 'ff ff ff xx' every 1024/512 bytes, - unused 8 bits at end of JPEG blocks, and then ask for a new pixel format. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- include/linux/videodev2.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index e65a6bed4e3e..6c73516b74c4 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -334,6 +334,7 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_SPCA508 v4l2_fourcc('S', '5', '0', '8') /* YUVY per line */ #define V4L2_PIX_FMT_SPCA561 v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */ #define V4L2_PIX_FMT_PAC207 v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */ +#define V4L2_PIX_FMT_PJPG v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */ /* * F O R M A T E N U M E R A T I O N -- cgit v1.2.3 From 89a44b8a690ff2d8639b72931d9c197a8db0c803 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 3 Sep 2008 16:48:16 -0300 Subject: V4L/DVB (8720): gspca: V4L2_CAP_SENSOR_UPSIDE_DOWN added as a cap for some webcams. This patch adds a V4L2_CAP_SENSOR_UPSIDE_DOWN flag to the capabilities flags, and sets this flag for the Philips SPC200NC cam (which has its sensor installed upside down). The same flag is also needed and added for the Philips SPC300NC. Together with a patch to libv4l which adds flipping the image in software this fixes the upside down display with the SPC200NC cam. Signed-of-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- include/linux/videodev2.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 6c73516b74c4..4c30655b293f 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -261,6 +261,11 @@ struct v4l2_capability { #define V4L2_CAP_ASYNCIO 0x02000000 /* async I/O */ #define V4L2_CAP_STREAMING 0x04000000 /* streaming I/O ioctls */ +/* This flags gets set if the "sensor" is known to be upside down and this can + *not* be fixed using v4l2 flipx/y controls. Note that absence of this flag + is not a guarantee for the image not being upside down. */ +#define V4L2_CAP_SENSOR_UPSIDE_DOWN 0x10000000 + /* * V I D E O I M A G E F O R M A T */ -- cgit v1.2.3 From d6db35e89c420d867e9ffdf145ecf2cb1b91291b Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 3 Sep 2008 17:12:13 -0300 Subject: V4L/DVB (8809): gspca: Revert commit 9a9335776548d01525141c6e8f0c12e86bbde982 the previous patch (sensor upside down). Signed-off-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- include/linux/videodev2.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 4c30655b293f..6c73516b74c4 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -261,11 +261,6 @@ struct v4l2_capability { #define V4L2_CAP_ASYNCIO 0x02000000 /* async I/O */ #define V4L2_CAP_STREAMING 0x04000000 /* streaming I/O ioctls */ -/* This flags gets set if the "sensor" is known to be upside down and this can - *not* be fixed using v4l2 flipx/y controls. Note that absence of this flag - is not a guarantee for the image not being upside down. */ -#define V4L2_CAP_SENSOR_UPSIDE_DOWN 0x10000000 - /* * V I D E O I M A G E F O R M A T */ -- cgit v1.2.3 From 20122542df420a31532c8e2b5d4107e9846bac6b Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 17:12:20 -0300 Subject: V4L/DVB (8832): gspca: Bad pixelformat of vc0321 webcams. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- include/linux/videodev2.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 6c73516b74c4..303d93ffd6b2 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -335,6 +335,7 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_SPCA561 v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */ #define V4L2_PIX_FMT_PAC207 v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */ #define V4L2_PIX_FMT_PJPG v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */ +#define V4L2_PIX_FMT_YVYU v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16 YVU 4:2:2 */ /* * F O R M A T E N U M E R A T I O N -- cgit v1.2.3 From 7c1e76897492d92b6a1c2d6892494d39ded9680c Mon Sep 17 00:00:00 2001 From: Venkatesh Pallipadi Date: Wed, 3 Sep 2008 21:36:50 +0000 Subject: clockevents: prevent clockevent event_handler ending up handler_noop There is a ordering related problem with clockevents code, due to which clockevents_register_device() called after tickless/highres switch will not work. The new clockevent ends up with clockevents_handle_noop as event handler, resulting in no timer activity. The problematic path seems to be * old device already has hrtimer_interrupt as the event_handler * new clockevent device registers with a higher rating * tick_check_new_device() is called * clockevents_exchange_device() gets called * old->event_handler is set to clockevents_handle_noop * tick_setup_device() is called for the new device * which sets new->event_handler using the old->event_handler which is noop. Change the ordering so that new device inherits the proper handler. This does not have any issue in normal case as most likely all the clockevent devices are setup before the highres switch. But, can potentially be affecting some corner case where HPET force detect happens after the highres switch. This was a problem with HPET in MSI mode code that we have been experimenting with. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Shaohua Li Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- include/linux/clockchips.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/clockchips.h b/include/linux/clockchips.h index c33b0dc28e4d..ed3a5d473e52 100644 --- a/include/linux/clockchips.h +++ b/include/linux/clockchips.h @@ -127,6 +127,8 @@ extern int clockevents_register_notifier(struct notifier_block *nb); extern int clockevents_program_event(struct clock_event_device *dev, ktime_t expires, ktime_t now); +extern void clockevents_handle_noop(struct clock_event_device *dev); + #ifdef CONFIG_GENERIC_CLOCKEVENTS extern void clockevents_notify(unsigned long reason, void *arg); #else -- cgit v1.2.3 From afbc8d8e72daa5a5faf6a0242186bdfcc42b2427 Mon Sep 17 00:00:00 2001 From: Khem Raj Date: Thu, 4 Sep 2008 23:11:01 -0700 Subject: Fix conditional export of kvh.h and a.out.h to userspace. Some architectures have moved the asm/ into arch/ and some have not. This patch checks for a.out.h and kvh.h in both places before exporting the corresponding file from linux/ [dwmw2: simplified a little] Signed-off-by: Khem Raj Signed-off-by: David Woodhouse --- include/linux/Kbuild | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 59391250d51c..b68ec09399be 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -167,7 +167,8 @@ unifdef-y += acct.h unifdef-y += adb.h unifdef-y += adfs_fs.h unifdef-y += agpgart.h -ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/a.out.h),) +ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \ + $(srctree)/include/asm-$(SRCARCH)/a.out.h),) unifdef-y += a.out.h endif unifdef-y += apm_bios.h @@ -258,7 +259,8 @@ unifdef-y += kd.h unifdef-y += kernelcapi.h unifdef-y += kernel.h unifdef-y += keyboard.h -ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/kvm.h),) +ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \ + $(srctree)/include/asm-$(SRCARCH)/kvm.h),) unifdef-y += kvm.h endif unifdef-y += llc.h -- cgit v1.2.3 From 49048622eae698e5c4ae61f7e71200f265ccc529 Mon Sep 17 00:00:00 2001 From: Balbir Singh Date: Fri, 5 Sep 2008 18:12:23 +0200 Subject: sched: fix process time monotonicity Spencer reported a problem where utime and stime were going negative despite the fixes in commit b27f03d4bdc145a09fb7b0c0e004b29f1ee555fa. The suspected reason for the problem is that signal_struct maintains it's own utime and stime (of exited tasks), these are not updated using the new task_utime() routine, hence sig->utime can go backwards and cause the same problem to occur (sig->utime, adds tsk->utime and not task_utime()). This patch fixes the problem TODO: using max(task->prev_utime, derived utime) works for now, but a more generic solution is to implement cputime_max() and use the cputime_gt() function for comparison. Reported-by: spencer@bluehost.com Signed-off-by: Balbir Singh Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- include/linux/sched.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index cfb0d87b99fc..3d9120c5ad15 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1475,6 +1475,10 @@ static inline void put_task_struct(struct task_struct *t) __put_task_struct(t); } +extern cputime_t task_utime(struct task_struct *p); +extern cputime_t task_stime(struct task_struct *p); +extern cputime_t task_gtime(struct task_struct *p); + /* * Per process flags */ -- cgit v1.2.3 From 11d55d2cba6e867be8955e5ae011c54c556b849f Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Fri, 5 Sep 2008 14:00:18 -0700 Subject: res_counter: fix off-by-one bug in setting limit I found we can no longer set limit to 0 with 2.6.27-rcX: # mount -t cgroup -omemory xxx /mnt # mkdir /mnt/0 # echo 0 > /mnt/0/memory.limit_in_bytes bash: echo: write error: Device or resource busy It turned out 'limit' can't be set to 'usage', which is wrong IMO. Signed-off-by: Li Zefan Acked-by: KAMEZAWA Hiroyuki Acked-by: Balbir Singh Acked-by: Pavel Emelyanov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/res_counter.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/res_counter.h b/include/linux/res_counter.h index fdeadd9740dc..271c1c2c9f6f 100644 --- a/include/linux/res_counter.h +++ b/include/linux/res_counter.h @@ -166,7 +166,7 @@ static inline int res_counter_set_limit(struct res_counter *cnt, int ret = -EBUSY; spin_lock_irqsave(&cnt->lock, flags); - if (cnt->usage < limit) { + if (cnt->usage <= limit) { cnt->limit = limit; ret = 0; } -- cgit v1.2.3 From 22f30168d296dbb54a21ebad44c9d735bca6f67b Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Fri, 5 Sep 2008 14:00:23 -0700 Subject: tracehook: comment pasto fixes Fix some pasto's in comments in the new linux/tracehook.h and asm-generic/syscall.h files. Reported-by: Wenji Huang Signed-off-by: Roland McGrath Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/tracehook.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h index b48d81969574..6186a789d6c7 100644 --- a/include/linux/tracehook.h +++ b/include/linux/tracehook.h @@ -272,7 +272,7 @@ static inline void tracehook_finish_clone(struct task_struct *child, * tracehook_report_clone_complete(). This must prevent the child from * self-reaping if tracehook_report_clone_complete() uses the @child * pointer; otherwise it might have died and been released by the time - * tracehook_report_report_clone_complete() is called. + * tracehook_report_clone_complete() is called. * * Called with no locks held, but the child cannot run until this returns. */ -- cgit v1.2.3 From dfb512ec4834116124da61d6c1ee10fd0aa32bd6 Mon Sep 17 00:00:00 2001 From: Max Krasnyansky Date: Fri, 29 Aug 2008 13:11:41 -0700 Subject: sched: arch_reinit_sched_domains() must destroy domains to force rebuild What I realized recently is that calling rebuild_sched_domains() in arch_reinit_sched_domains() by itself is not enough when cpusets are enabled. partition_sched_domains() code is trying to avoid unnecessary domain rebuilds and will not actually rebuild anything if new domain masks match the old ones. What this means is that doing echo 1 > /sys/devices/system/cpu/sched_mc_power_savings on a system with cpusets enabled will not take affect untill something changes in the cpuset setup (ie new sets created or deleted). This patch fixes restore correct behaviour where domains must be rebuilt in order to enable MC powersaving flags. Test on quad-core Core2 box with both CONFIG_CPUSETS and !CONFIG_CPUSETS. Also tested on dual-core Core2 laptop. Lockdep is happy and things are working as expected. Signed-off-by: Max Krasnyansky Tested-by: Vaidyanathan Srinivasan Signed-off-by: Ingo Molnar --- include/linux/cpuset.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h index e8f450c499b0..2691926fb506 100644 --- a/include/linux/cpuset.h +++ b/include/linux/cpuset.h @@ -160,7 +160,7 @@ static inline int current_cpuset_is_being_rebound(void) static inline void rebuild_sched_domains(void) { - partition_sched_domains(0, NULL, NULL); + partition_sched_domains(1, NULL, NULL); } #endif /* !CONFIG_CPUSETS */ -- cgit v1.2.3