From ce157510eb886feb996a7a13354973bdf4aae1a1 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Thu, 11 Apr 2013 01:34:59 -0700 Subject: mtd: nand: reword nand_chip bad block interface comments This remedies a few problems: (1) The use of "the" vs. "a" is a little confusing, IMO. (2) nand_chip.block_bad is used exclusively for checking the OOB bad block markers of a NAND. Any BBT functionality is handled in nand_bbt.c, so this description should differentiate itself from nand_bbt.c. Signed-off-by: Brian Norris Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- include/linux/mtd/nand.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index ab6363443ce8..50c5ea02c81a 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -390,8 +390,8 @@ struct nand_buffers { * @write_buf: [REPLACEABLE] write data from the buffer to the chip * @read_buf: [REPLACEABLE] read data from the chip into the buffer * @select_chip: [REPLACEABLE] select chip nr - * @block_bad: [REPLACEABLE] check, if the block is bad - * @block_markbad: [REPLACEABLE] mark the block bad + * @block_bad: [REPLACEABLE] check if a block is bad, using OOB markers + * @block_markbad: [REPLACEABLE] mark a block bad * @cmd_ctrl: [BOARDSPECIFIC] hardwarespecific function for controlling * ALE/CLE/nCE. Also used to write command and address * @init_size: [BOARDSPECIFIC] hardwarespecific function for setting -- cgit v1.2.3 From 52778b2e9fcb66c8f1c9d5b1ae435815c19e7ae3 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Wed, 15 May 2013 16:40:25 +0800 Subject: mtd: increase max OOB size to 744 The oob size of Micron's MT29F64G08CBABAWP is 744 bytes. So increase the NAND_MAX_OOBSIZE to 744. Signed-off-by: Huang Shijie Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- include/linux/mtd/nand.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 50c5ea02c81a..38535eb453db 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -56,7 +56,7 @@ extern int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len); * is supported now. If you add a chip with bigger oobsize/page * adjust this accordingly. */ -#define NAND_MAX_OOBSIZE 640 +#define NAND_MAX_OOBSIZE 744 #define NAND_MAX_PAGESIZE 8192 /* -- cgit v1.2.3 From 64ddba4d8a381b65bebee24c8da4eb80080c64a4 Mon Sep 17 00:00:00 2001 From: Mian Yousaf Kaukab Date: Mon, 29 Apr 2013 14:07:48 +0200 Subject: mtd: nand: fsmc: update of OF support Add nand bank selection and timings to the device tree bindings. Signed-off-by: Mian Yousaf Kaukab [Added some documentation] Signed-off-by: Linus Walleij Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- include/linux/mtd/fsmc.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mtd/fsmc.h b/include/linux/mtd/fsmc.h index d6ed61ef451d..c8be32e9fc49 100644 --- a/include/linux/mtd/fsmc.h +++ b/include/linux/mtd/fsmc.h @@ -137,6 +137,7 @@ enum access_mode { /** * fsmc_nand_platform_data - platform specific NAND controller config + * @nand_timings: timing setup for the physical NAND interface * @partitions: partition table for the platform, use a default fallback * if this is NULL * @nr_partitions: the number of partitions in the previous entry -- cgit v1.2.3 From d914c932d7764bf9633af974940aee9390adf20d Mon Sep 17 00:00:00 2001 From: David Mosberger Date: Wed, 29 May 2013 15:30:13 +0300 Subject: mtd: nand_base: Only use GET/SET FEATURES command on chips that support them. Spansion's S34MLx chips support ONFI but not the GET/SET FEATURES calls. Signed-off-by: David Mosberger Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- include/linux/mtd/nand.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 38535eb453db..0745a42f1acd 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -217,6 +217,9 @@ struct nand_chip; /* ONFI subfeature parameters length */ #define ONFI_SUBFEATURE_PARAM_LEN 4 +/* ONFI optional commands SET/GET FEATURES supported? */ +#define ONFI_OPT_CMD_SET_GET_FEATURES (1 << 2) + struct nand_onfi_params { /* rev info and features block */ /* 'O' 'N' 'F' 'I' */ -- cgit v1.2.3 From 71b94e2e866aa35f40945d9e820fc3214b792d1f Mon Sep 17 00:00:00 2001 From: Josh Wu Date: Thu, 9 May 2013 15:34:54 +0800 Subject: mtd: atmel_nand: replace cpu_is_at32ap7000() with a nand platform data The nand driver use cpu_is_at32ap7000() macro for a workaround. For the multi-platform support, we will remove this cpu_is_xxx() macro. This patch adds a boolean variable need_reset_workaround in structure atmel_nand_data. Using this variable we can remove cpu_is_at32ap7000() macro. Hans-Christian: Feel free to push this through the mtd tree, if they won't accept it I'm working on getting my workflow up on the linux-avr32.git tree. Signed-off-by: Josh Wu Acked-by: Hans-Christian Egtvedt Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- include/linux/platform_data/atmel.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h index 6a293b7fff3b..59f558d9b81e 100644 --- a/include/linux/platform_data/atmel.h +++ b/include/linux/platform_data/atmel.h @@ -71,6 +71,9 @@ struct atmel_nand_data { u8 on_flash_bbt; /* bbt on flash */ struct mtd_partition *parts; unsigned int num_parts; + + /* default is false, only for at32ap7000 chip is true */ + bool need_reset_workaround; }; /* Serial */ -- cgit v1.2.3 From 1b7192658a08f70df0f290634fd7cd2ecb629fc9 Mon Sep 17 00:00:00 2001 From: Josh Wu Date: Thu, 9 May 2013 15:34:55 +0800 Subject: mtd: atmel_nand: add a new dt binding item for nand dma support This patch will set the nand dma support in dts. Since we will not use cpu_is_xxx() in nand driver. We needn't include the mach/cpu.h any more. Signed-off-by: Josh Wu Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- include/linux/platform_data/atmel.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h index 59f558d9b81e..cea9f70133c5 100644 --- a/include/linux/platform_data/atmel.h +++ b/include/linux/platform_data/atmel.h @@ -71,6 +71,7 @@ struct atmel_nand_data { u8 on_flash_bbt; /* bbt on flash */ struct mtd_partition *parts; unsigned int num_parts; + bool has_dma; /* support dma transfer */ /* default is false, only for at32ap7000 chip is true */ bool need_reset_workaround; -- cgit v1.2.3 From b32843b772db6024336e36c39359d8edc3b416ab Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Tue, 30 Jul 2013 17:52:59 -0700 Subject: mtd: nand: hide in-memory BBT implementation details nand_base.c shouldn't have to know the implementation details of nand_bbt's in-memory BBT. Specifically, nand_base shouldn't perform the bit masking and shifting to isolate a BBT entry. Instead, just move some of the BBT code into a new nand_markbad_bbt() interface. This interface allows external users (i.e., nand_base) to mark a single block as bad in the BBT. Then nand_bbt will take care of modifying the in-memory BBT and updating the flash-based BBT (if applicable). Signed-off-by: Brian Norris Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- include/linux/mtd/nand.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 0745a42f1acd..9f7b248c70fe 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -628,8 +628,8 @@ extern struct nand_flash_dev nand_flash_ids[]; extern struct nand_manufacturers nand_manuf_ids[]; extern int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd); -extern int nand_update_bbt(struct mtd_info *mtd, loff_t offs); extern int nand_default_bbt(struct mtd_info *mtd); +extern int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs); extern int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt); extern int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, int allowbbt); -- cgit v1.2.3 From dad2256269cb2ee3a72baefc5eb6e02ae1de2cfe Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Tue, 30 Jul 2013 17:53:00 -0700 Subject: mtd: nand: remove NAND_BBT_SCANEMPTY NAND_BBT_SCANEMPTY is a strange, badly-supported option with omap as its single remaining user. NAND_BBT_SCANEMPTY was likely used by accident in omap2[1]. And anyway, omap2 doesn't scan the chip for bad blocks (courtesy of NAND_SKIP_BBTSCAN), and so its use of this option is irrelevant. This patch drops the NAND_BBT_SCANEMPTY option. [1] http://lists.infradead.org/pipermail/linux-mtd/2012-July/042902.html Signed-off-by: Brian Norris Cc: Ivan Djelic Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- include/linux/mtd/bbm.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h index 211ff67e8b0d..95fc482cef36 100644 --- a/include/linux/mtd/bbm.h +++ b/include/linux/mtd/bbm.h @@ -93,8 +93,6 @@ struct nand_bbt_descr { #define NAND_BBT_CREATE_EMPTY 0x00000400 /* Search good / bad pattern through all pages of a block */ #define NAND_BBT_SCANALLPAGES 0x00000800 -/* Scan block empty during good / bad block scan */ -#define NAND_BBT_SCANEMPTY 0x00001000 /* Write bbt if neccecary */ #define NAND_BBT_WRITE 0x00002000 /* Read and write back block contents when writing bbt */ -- cgit v1.2.3 From 4cfeca2d58de8292f45351f84e84f657222a4611 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Fri, 17 May 2013 11:17:25 +0800 Subject: mtd: add datasheet's ECC information to nand_chip{} 1.) Why add the ECC information to the nand_chip{} ? Each nand chip has its requirement for the ECC correctability, such as "4bit ECC for each 512Byte" or "40bit ECC for each 1024Byte". This ECC info is very important to the nand controller, such as gpmi. Take the Micron MT29F64G08CBABA for example, its geometry is 8KiB page size, 744 bytes oob size and it requires 40bit ECC per 1KiB. If we do not provide the ECC info to the gpmi nand driver, it has to calculate the ECC correctability itself. The gpmi driver will gets the 56bit ECC for per 1KiB which is beyond its BCH's 40bit ecc capibility. The gpmi will quits in this case. But in actually, the gpmi can supports this nand chip if it can get the right ECC info. 2.) about the new fields. The @ecc_strength_ds stands for the ecc bits needed within the @ecc_step_ds. The two fields should be set from the nand chip's datasheets. For example: "4bit ECC for each 512Byte" could be: @ecc_strength_ds = 4, @ecc_step_ds = 512. "40bit ECC for each 1024Byte" could be: @ecc_strength_ds = 40, @ecc_step_ds = 1024. 3.) Why do not re-use the @strength and @size in the nand_ecc_ctrl{}? The @strength and @size in nand_ecc_ctrl{} is used by the nand controller driver, while the @ecc_strength_ds and @ecc_step_ds are get from the datasheet. Signed-off-by: Huang Shijie Reviewed-and-tested-by: Brian Norris Signed-off-by: Brian Norris Signed-off-by: David Woodhouse --- include/linux/mtd/nand.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 9f7b248c70fe..fbf3bba37272 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -437,6 +437,12 @@ struct nand_buffers { * bad block marker position; i.e., BBM == 11110111b is * not bad when badblockbits == 7 * @cellinfo: [INTERN] MLC/multichip data from chip ident + * @ecc_strength_ds: [INTERN] ECC correctability from the datasheet. + * Minimum amount of bit errors per @ecc_step_ds guaranteed + * to be correctable. If unknown, set to zero. + * @ecc_step_ds: [INTERN] ECC step required by the @ecc_strength_ds, + * also from the datasheet. It is the recommended ECC step + * size, if known; if unknown, set to zero. * @numchips: [INTERN] number of physical chips * @chipsize: [INTERN] the size of one chip for multichip arrays * @pagemask: [INTERN] page number mask = number of (pages / chip) - 1 @@ -513,6 +519,8 @@ struct nand_chip { unsigned int pagebuf_bitflips; int subpagesize; uint8_t cellinfo; + uint16_t ecc_strength_ds; + uint16_t ecc_step_ds; int badblockpos; int badblockbits; -- cgit v1.2.3 From 5138a98f6f47ce62a86cce4b9c381aaf4ad3a643 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Fri, 17 May 2013 11:17:27 +0800 Subject: mtd: add data structures for Extended Parameter Page Since the ONFI 2.1, the onfi spec adds the Extended Parameter Page to store the ECC info. The onfi spec tells us that if the nand chip's recommended ECC codeword size is not 512 bytes, then the @ecc_bits is 0xff. The host _SHOULD_ then read the Extended ECC information that is part of the extended parameter page to retrieve the ECC requirements for this device. This patch adds [1] the neccessary fields for nand_onfi_params{}, [2] and adds the onfi_ext_ecc_info{} for Extended ECC information, [3] adds onfi_ext_section{} for extended sections, [4] and adds onfi_ext_param_page{} for the Extended Parameter Page. Acked-by: Pekon Gupta Signed-off-by: Huang Shijie Reviewed-and-tested-by: Brian Norris [Brian: amended for checkpatch.pl] Signed-off-by: Brian Norris Signed-off-by: David Woodhouse --- include/linux/mtd/nand.h | 39 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 38 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index fbf3bba37272..01a7f3c71bd0 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -227,7 +227,10 @@ struct nand_onfi_params { __le16 revision; __le16 features; __le16 opt_cmd; - u8 reserved[22]; + u8 reserved0[2]; + __le16 ext_param_page_length; /* since ONFI 2.1 */ + u8 num_of_param_pages; /* since ONFI 2.1 */ + u8 reserved1[17]; /* manufacturer information block */ char manufacturer[12]; @@ -284,6 +287,40 @@ struct nand_onfi_params { #define ONFI_CRC_BASE 0x4F4E +/* Extended ECC information Block Definition (since ONFI 2.1) */ +struct onfi_ext_ecc_info { + u8 ecc_bits; + u8 codeword_size; + __le16 bb_per_lun; + __le16 block_endurance; + u8 reserved[2]; +} __packed; + +#define ONFI_SECTION_TYPE_0 0 /* Unused section. */ +#define ONFI_SECTION_TYPE_1 1 /* for additional sections. */ +#define ONFI_SECTION_TYPE_2 2 /* for ECC information. */ +struct onfi_ext_section { + u8 type; + u8 length; +} __packed; + +#define ONFI_EXT_SECTION_MAX 8 + +/* Extended Parameter Page Definition (since ONFI 2.1) */ +struct onfi_ext_param_page { + __le16 crc; + u8 sig[4]; /* 'E' 'P' 'P' 'S' */ + u8 reserved0[10]; + struct onfi_ext_section sections[ONFI_EXT_SECTION_MAX]; + + /* + * The actual size of the Extended Parameter Page is in + * @ext_param_page_length of nand_onfi_params{}. + * The following are the variable length sections. + * So we do not add any fields below. Please see the ONFI spec. + */ +} __packed; + /** * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices * @lock: protection lock -- cgit v1.2.3 From 5b40db68cb1bd14b3d5b159754c9c1bc3bdeb080 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Fri, 17 May 2013 11:17:28 +0800 Subject: mtd: add a helper to get the supported features for ONFI nand add a helper to get the supported features for ONFI nand. Also add the neccessary macros. Signed-off-by: Huang Shijie Reviewed-and-tested-by: Brian Norris Signed-off-by: Brian Norris Signed-off-by: David Woodhouse --- include/linux/mtd/nand.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 01a7f3c71bd0..bf4c566f0647 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -202,6 +202,10 @@ typedef enum { /* Keep gcc happy */ struct nand_chip; +/* ONFI features */ +#define ONFI_FEATURE_16_BIT_BUS (1 << 0) +#define ONFI_FEATURE_EXT_PARAM_PAGE (1 << 7) + /* ONFI timing mode, used in both asynchronous and synchronous mode */ #define ONFI_TIMING_MODE_0 (1 << 0) #define ONFI_TIMING_MODE_1 (1 << 1) @@ -756,6 +760,12 @@ struct platform_nand_chip *get_platform_nandchip(struct mtd_info *mtd) return chip->priv; } +/* return the supported features. */ +static inline int onfi_feature(struct nand_chip *chip) +{ + return chip->onfi_version ? le16_to_cpu(chip->onfi_params.features) : 0; +} + /* return the supported asynchronous timing mode. */ static inline int onfi_get_async_timing_mode(struct nand_chip *chip) { -- cgit v1.2.3 From 2dc0bdd91bb63f7d5755137177315c49637f6a96 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Fri, 17 May 2013 11:17:31 +0800 Subject: mtd: add ECC info for nand_flash_dev{} Add an instance of an anonymous struct to store the ECC info for full id nand chips. @ecc.strength_ds: ECC correctability from the datasheet. @ecc.step_ds: ECC size required by the @ecc.strength_ds, These two fields are all from the datasheet. Also add the necessary macros to make the code simple and clean. Signed-off-by: Huang Shijie Signed-off-by: Brian Norris Signed-off-by: David Woodhouse --- include/linux/mtd/nand.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index bf4c566f0647..ac8e89d5a792 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -628,6 +628,11 @@ struct nand_chip { { .name = (nm), {{ .dev_id = (devid) }}, .chipsize = (chipsz), \ .options = (opts) } +#define NAND_ECC_INFO(_strength, _step) \ + { .strength_ds = (_strength), .step_ds = (_step) } +#define NAND_ECC_STRENGTH(type) ((type)->ecc.strength_ds) +#define NAND_ECC_STEP(type) ((type)->ecc.step_ds) + /** * struct nand_flash_dev - NAND Flash Device ID Structure * @name: a human-readable name of the NAND chip @@ -645,6 +650,12 @@ struct nand_chip { * @options: stores various chip bit options * @id_len: The valid length of the @id. * @oobsize: OOB size + * @ecc.strength_ds: The ECC correctability from the datasheet, same as the + * @ecc_strength_ds in nand_chip{}. + * @ecc.step_ds: The ECC step required by the @ecc.strength_ds, same as the + * @ecc_step_ds in nand_chip{}, also from the datasheet. + * For example, the "4bit ECC for each 512Byte" can be set with + * NAND_ECC_INFO(4, 512). */ struct nand_flash_dev { char *name; @@ -661,6 +672,10 @@ struct nand_flash_dev { unsigned int options; uint16_t id_len; uint16_t oobsize; + struct { + uint16_t strength_ds; + uint16_t step_ds; + } ecc; }; /** -- cgit v1.2.3 From ec82135a011cf657ef02cfa2038331b381e39960 Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Mon, 12 Aug 2013 14:14:54 -0300 Subject: mtd: nand: pxa3xx: Remove unneeded internal cmdset Use the defined macros for NAND command instead of using a constant internal structure. This commit is only a cleanup, there's no functionality modification. Signed-off-by: Ezequiel Garcia Tested-by: Daniel Mack Signed-off-by: Brian Norris Signed-off-by: David Woodhouse --- include/linux/platform_data/mtd-nand-pxa3xx.h | 13 ------------- 1 file changed, 13 deletions(-) (limited to 'include/linux') diff --git a/include/linux/platform_data/mtd-nand-pxa3xx.h b/include/linux/platform_data/mtd-nand-pxa3xx.h index c42f39f20195..ffb801998e5d 100644 --- a/include/linux/platform_data/mtd-nand-pxa3xx.h +++ b/include/linux/platform_data/mtd-nand-pxa3xx.h @@ -16,19 +16,6 @@ struct pxa3xx_nand_timing { unsigned int tAR; /* ND_ALE low to ND_nRE low delay */ }; -struct pxa3xx_nand_cmdset { - uint16_t read1; - uint16_t read2; - uint16_t program; - uint16_t read_status; - uint16_t read_id; - uint16_t erase; - uint16_t reset; - uint16_t lock; - uint16_t unlock; - uint16_t lock_status; -}; - struct pxa3xx_nand_flash { char *name; uint32_t chip_id; -- cgit v1.2.3 From c41a0582d59e3bc41978ac4a23e457d86ac7365f Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Fri, 16 Aug 2013 10:10:04 +0800 Subject: mtd: add a new ecc_step_size field to mtd_info{} In order to implement the NAND boot for some Freescale's chips, such as imx23/imx28/imx50/imx6, we use a tool (called kobs-ng) to burn the uboot and some metadata to nand chip. And the ROM code will use the metadata to configrate the BCH, and to find the uboot. The ECC information(ecc step size, ecc strength) which is used to configrure the BCH is part of the metadata. The kobs-ng can get the ecc strength from the sys node /sys/*/ecc_strength now. But it can not get the ecc step size. This patch adds a new field to store the ecc step size in mtd_info{}, and it makes preparation for the next patches. Signed-off-by: Huang Shijie Signed-off-by: Artem Bityutskiy Signed-off-by: Brian Norris Signed-off-by: David Woodhouse --- include/linux/mtd/mtd.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index a5cf4e8d6818..f9bfe526d310 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -173,6 +173,9 @@ struct mtd_info { /* ECC layout structure pointer - read only! */ struct nand_ecclayout *ecclayout; + /* the ecc step size. */ + unsigned int ecc_step_size; + /* max number of correctible bit errors per ecc step */ unsigned int ecc_strength; -- cgit v1.2.3