From 99be0245c8869cbd7b9c0ab3f093f41c60362f91 Mon Sep 17 00:00:00 2001 From: Sebastian Reichel Date: Sun, 16 Mar 2014 02:43:27 +0100 Subject: mfd: twl4030-madc: Cleanup driver Some style fixes in twl4030-madc driver. Reported-by: Jonathan Cameron Reported-by: Lee Jones Signed-off-by: Sebastian Reichel Acked-by: Jonathan Cameron Tested-by: Marek Belisko Signed-off-by: Lee Jones --- include/linux/i2c/twl4030-madc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/i2c/twl4030-madc.h b/include/linux/i2c/twl4030-madc.h index 01f595107048..1c0134dd3271 100644 --- a/include/linux/i2c/twl4030-madc.h +++ b/include/linux/i2c/twl4030-madc.h @@ -44,7 +44,7 @@ struct twl4030_madc_conversion_method { struct twl4030_madc_request { unsigned long channels; - u16 do_avg; + bool do_avg; u16 method; u16 type; bool active; -- cgit v1.2.3 From 204dfd63a07ec4785fc786ff3511d85eb1346b7b Mon Sep 17 00:00:00 2001 From: Sebastian Reichel Date: Sun, 16 Mar 2014 02:43:28 +0100 Subject: mfd: twl-core: Add twl_i2c_read/write_u16 Add a simple twl_i2c_read/write_u16 wrapper over the twl_i2c_read/write, which is similar to the twl_i2c_read/write_u8 wrapper. Signed-off-by: Sebastian Reichel Acked-by: Jonathan Cameron Tested-by: Marek Belisko Signed-off-by: Lee Jones --- include/linux/i2c/twl.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/linux') diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index ade1c06d4ceb..d2b16704624c 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -195,6 +195,18 @@ static inline int twl_i2c_read_u8(u8 mod_no, u8 *val, u8 reg) { return twl_i2c_read(mod_no, val, reg, 1); } +static inline int twl_i2c_write_u16(u8 mod_no, u16 val, u8 reg) { + val = cpu_to_le16(val); + return twl_i2c_write(mod_no, (u8*) &val, reg, 2); +} + +static inline int twl_i2c_read_u16(u8 mod_no, u16 *val, u8 reg) { + int ret; + ret = twl_i2c_read(mod_no, (u8*) val, reg, 2); + *val = le16_to_cpu(*val); + return ret; +} + int twl_get_type(void); int twl_get_version(void); int twl_get_hfclk_rate(void); -- cgit v1.2.3 From 5e98fc8feaa869aa6ca5c73830f0855133eb461e Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 28 Jan 2014 13:18:26 +0100 Subject: mfd: max14577: Remove unused enum max14577_irq_source Remove unused symbol: enum max14577_irq_source. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Lee Jones --- include/linux/mfd/max14577-private.h | 8 -------- 1 file changed, 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/max14577-private.h b/include/linux/mfd/max14577-private.h index a3d0185196d3..c9b332fb0d5d 100644 --- a/include/linux/mfd/max14577-private.h +++ b/include/linux/mfd/max14577-private.h @@ -248,14 +248,6 @@ enum max14577_charger_reg { /* MAX14577 regulator SFOUT LDO voltage, fixed, uV */ #define MAX14577_REGULATOR_SAFEOUT_VOLTAGE 4900000 -enum max14577_irq_source { - MAX14577_IRQ_INT1 = 0, - MAX14577_IRQ_INT2, - MAX14577_IRQ_INT3, - - MAX14577_IRQ_REGS_NUM, -}; - enum max14577_irq { /* INT1 */ MAX14577_IRQ_INT1_ADC, -- cgit v1.2.3 From ec2b26724f81d58008626228686f47ca3337e7ed Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 28 Jan 2014 13:18:27 +0100 Subject: mfd: max14577: Remove not needed header inclusion Remove not needed max14577-private.h header inclusion in the main driver header. Remove obvious comment. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Lee Jones --- include/linux/mfd/max14577.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/max14577.h b/include/linux/mfd/max14577.h index 247b021dfaaf..736d39c3ec0d 100644 --- a/include/linux/mfd/max14577.h +++ b/include/linux/mfd/max14577.h @@ -25,13 +25,8 @@ #ifndef __MAX14577_H__ #define __MAX14577_H__ -#include #include -/* - * MAX14577 Regulator - */ - /* MAX14577 regulator IDs */ enum max14577_regulators { MAX14577_SAFEOUT = 0, -- cgit v1.2.3 From 8dbb947af37159d3df202d3cdbbae5fb896c462a Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Wed, 22 Jan 2014 13:04:23 +0000 Subject: mfd: wm5102: Make additional DSP registers available to the user Expose some DSP registers which are useful for DSP users to be able to access whilst debugging their firmware. Signed-off-by: Charles Keepax Signed-off-by: Lee Jones --- include/linux/mfd/arizona/registers.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h index fdf3aa376eb2..6a3b16993c1a 100644 --- a/include/linux/mfd/arizona/registers.h +++ b/include/linux/mfd/arizona/registers.h @@ -1034,6 +1034,23 @@ #define ARIZONA_DSP1_STATUS_1 0x1104 #define ARIZONA_DSP1_STATUS_2 0x1105 #define ARIZONA_DSP1_STATUS_3 0x1106 +#define ARIZONA_DSP1_WDMA_BUFFER_1 0x1110 +#define ARIZONA_DSP1_WDMA_BUFFER_2 0x1111 +#define ARIZONA_DSP1_WDMA_BUFFER_3 0x1112 +#define ARIZONA_DSP1_WDMA_BUFFER_4 0x1113 +#define ARIZONA_DSP1_WDMA_BUFFER_5 0x1114 +#define ARIZONA_DSP1_WDMA_BUFFER_6 0x1115 +#define ARIZONA_DSP1_WDMA_BUFFER_7 0x1116 +#define ARIZONA_DSP1_WDMA_BUFFER_8 0x1117 +#define ARIZONA_DSP1_RDMA_BUFFER_1 0x1120 +#define ARIZONA_DSP1_RDMA_BUFFER_2 0x1121 +#define ARIZONA_DSP1_RDMA_BUFFER_3 0x1122 +#define ARIZONA_DSP1_RDMA_BUFFER_4 0x1123 +#define ARIZONA_DSP1_RDMA_BUFFER_5 0x1124 +#define ARIZONA_DSP1_RDMA_BUFFER_6 0x1125 +#define ARIZONA_DSP1_WDMA_CONFIG_1 0x1130 +#define ARIZONA_DSP1_WDMA_CONFIG_2 0x1131 +#define ARIZONA_DSP1_RDMA_CONFIG_1 0x1134 #define ARIZONA_DSP1_SCRATCH_0 0x1140 #define ARIZONA_DSP1_SCRATCH_1 0x1141 #define ARIZONA_DSP1_SCRATCH_2 0x1142 -- cgit v1.2.3 From 47ec66a17cca571eb7038b7835dff7cbd5851b90 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Wed, 22 Jan 2014 13:04:24 +0000 Subject: mfd: wm5110: Make additional DSP registers available to the user Expose some DSP registers which are useful for DSP users to be able to access whilst debugging their firmware. Signed-off-by: Charles Keepax Signed-off-by: Lee Jones --- include/linux/mfd/arizona/registers.h | 67 +++++++++++++++++++++++++++++++++++ 1 file changed, 67 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h index 6a3b16993c1a..90d57aec34e7 100644 --- a/include/linux/mfd/arizona/registers.h +++ b/include/linux/mfd/arizona/registers.h @@ -1034,6 +1034,7 @@ #define ARIZONA_DSP1_STATUS_1 0x1104 #define ARIZONA_DSP1_STATUS_2 0x1105 #define ARIZONA_DSP1_STATUS_3 0x1106 +#define ARIZONA_DSP1_STATUS_4 0x1107 #define ARIZONA_DSP1_WDMA_BUFFER_1 0x1110 #define ARIZONA_DSP1_WDMA_BUFFER_2 0x1111 #define ARIZONA_DSP1_WDMA_BUFFER_3 0x1112 @@ -1050,7 +1051,10 @@ #define ARIZONA_DSP1_RDMA_BUFFER_6 0x1125 #define ARIZONA_DSP1_WDMA_CONFIG_1 0x1130 #define ARIZONA_DSP1_WDMA_CONFIG_2 0x1131 +#define ARIZONA_DSP1_WDMA_OFFSET_1 0x1132 #define ARIZONA_DSP1_RDMA_CONFIG_1 0x1134 +#define ARIZONA_DSP1_RDMA_OFFSET_1 0x1135 +#define ARIZONA_DSP1_EXTERNAL_START_SELECT_1 0x1138 #define ARIZONA_DSP1_SCRATCH_0 0x1140 #define ARIZONA_DSP1_SCRATCH_1 0x1141 #define ARIZONA_DSP1_SCRATCH_2 0x1142 @@ -1060,6 +1064,27 @@ #define ARIZONA_DSP2_STATUS_1 0x1204 #define ARIZONA_DSP2_STATUS_2 0x1205 #define ARIZONA_DSP2_STATUS_3 0x1206 +#define ARIZONA_DSP2_STATUS_4 0x1207 +#define ARIZONA_DSP2_WDMA_BUFFER_1 0x1210 +#define ARIZONA_DSP2_WDMA_BUFFER_2 0x1211 +#define ARIZONA_DSP2_WDMA_BUFFER_3 0x1212 +#define ARIZONA_DSP2_WDMA_BUFFER_4 0x1213 +#define ARIZONA_DSP2_WDMA_BUFFER_5 0x1214 +#define ARIZONA_DSP2_WDMA_BUFFER_6 0x1215 +#define ARIZONA_DSP2_WDMA_BUFFER_7 0x1216 +#define ARIZONA_DSP2_WDMA_BUFFER_8 0x1217 +#define ARIZONA_DSP2_RDMA_BUFFER_1 0x1220 +#define ARIZONA_DSP2_RDMA_BUFFER_2 0x1221 +#define ARIZONA_DSP2_RDMA_BUFFER_3 0x1222 +#define ARIZONA_DSP2_RDMA_BUFFER_4 0x1223 +#define ARIZONA_DSP2_RDMA_BUFFER_5 0x1224 +#define ARIZONA_DSP2_RDMA_BUFFER_6 0x1225 +#define ARIZONA_DSP2_WDMA_CONFIG_1 0x1230 +#define ARIZONA_DSP2_WDMA_CONFIG_2 0x1231 +#define ARIZONA_DSP2_WDMA_OFFSET_1 0x1232 +#define ARIZONA_DSP2_RDMA_CONFIG_1 0x1234 +#define ARIZONA_DSP2_RDMA_OFFSET_1 0x1235 +#define ARIZONA_DSP2_EXTERNAL_START_SELECT_1 0x1238 #define ARIZONA_DSP2_SCRATCH_0 0x1240 #define ARIZONA_DSP2_SCRATCH_1 0x1241 #define ARIZONA_DSP2_SCRATCH_2 0x1242 @@ -1069,6 +1094,27 @@ #define ARIZONA_DSP3_STATUS_1 0x1304 #define ARIZONA_DSP3_STATUS_2 0x1305 #define ARIZONA_DSP3_STATUS_3 0x1306 +#define ARIZONA_DSP3_STATUS_4 0x1307 +#define ARIZONA_DSP3_WDMA_BUFFER_1 0x1310 +#define ARIZONA_DSP3_WDMA_BUFFER_2 0x1311 +#define ARIZONA_DSP3_WDMA_BUFFER_3 0x1312 +#define ARIZONA_DSP3_WDMA_BUFFER_4 0x1313 +#define ARIZONA_DSP3_WDMA_BUFFER_5 0x1314 +#define ARIZONA_DSP3_WDMA_BUFFER_6 0x1315 +#define ARIZONA_DSP3_WDMA_BUFFER_7 0x1316 +#define ARIZONA_DSP3_WDMA_BUFFER_8 0x1317 +#define ARIZONA_DSP3_RDMA_BUFFER_1 0x1320 +#define ARIZONA_DSP3_RDMA_BUFFER_2 0x1321 +#define ARIZONA_DSP3_RDMA_BUFFER_3 0x1322 +#define ARIZONA_DSP3_RDMA_BUFFER_4 0x1323 +#define ARIZONA_DSP3_RDMA_BUFFER_5 0x1324 +#define ARIZONA_DSP3_RDMA_BUFFER_6 0x1325 +#define ARIZONA_DSP3_WDMA_CONFIG_1 0x1330 +#define ARIZONA_DSP3_WDMA_CONFIG_2 0x1331 +#define ARIZONA_DSP3_WDMA_OFFSET_1 0x1332 +#define ARIZONA_DSP3_RDMA_CONFIG_1 0x1334 +#define ARIZONA_DSP3_RDMA_OFFSET_1 0x1335 +#define ARIZONA_DSP3_EXTERNAL_START_SELECT_1 0x1338 #define ARIZONA_DSP3_SCRATCH_0 0x1340 #define ARIZONA_DSP3_SCRATCH_1 0x1341 #define ARIZONA_DSP3_SCRATCH_2 0x1342 @@ -1078,6 +1124,27 @@ #define ARIZONA_DSP4_STATUS_1 0x1404 #define ARIZONA_DSP4_STATUS_2 0x1405 #define ARIZONA_DSP4_STATUS_3 0x1406 +#define ARIZONA_DSP4_STATUS_4 0x1407 +#define ARIZONA_DSP4_WDMA_BUFFER_1 0x1410 +#define ARIZONA_DSP4_WDMA_BUFFER_2 0x1411 +#define ARIZONA_DSP4_WDMA_BUFFER_3 0x1412 +#define ARIZONA_DSP4_WDMA_BUFFER_4 0x1413 +#define ARIZONA_DSP4_WDMA_BUFFER_5 0x1414 +#define ARIZONA_DSP4_WDMA_BUFFER_6 0x1415 +#define ARIZONA_DSP4_WDMA_BUFFER_7 0x1416 +#define ARIZONA_DSP4_WDMA_BUFFER_8 0x1417 +#define ARIZONA_DSP4_RDMA_BUFFER_1 0x1420 +#define ARIZONA_DSP4_RDMA_BUFFER_2 0x1421 +#define ARIZONA_DSP4_RDMA_BUFFER_3 0x1422 +#define ARIZONA_DSP4_RDMA_BUFFER_4 0x1423 +#define ARIZONA_DSP4_RDMA_BUFFER_5 0x1424 +#define ARIZONA_DSP4_RDMA_BUFFER_6 0x1425 +#define ARIZONA_DSP4_WDMA_CONFIG_1 0x1430 +#define ARIZONA_DSP4_WDMA_CONFIG_2 0x1431 +#define ARIZONA_DSP4_WDMA_OFFSET_1 0x1432 +#define ARIZONA_DSP4_RDMA_CONFIG_1 0x1434 +#define ARIZONA_DSP4_RDMA_OFFSET_1 0x1435 +#define ARIZONA_DSP4_EXTERNAL_START_SELECT_1 0x1438 #define ARIZONA_DSP4_SCRATCH_0 0x1440 #define ARIZONA_DSP4_SCRATCH_1 0x1441 #define ARIZONA_DSP4_SCRATCH_2 0x1442 -- cgit v1.2.3 From 44b4dc616365d7897808555d415099330e3af9df Mon Sep 17 00:00:00 2001 From: Keerthy Date: Thu, 6 Feb 2014 11:20:12 +0530 Subject: mfd: tps65218: Add driver for the TPS65218 PMIC The TPS65218 chip is a power management IC for Portable Navigation Systems and Tablet Computing devices. It contains the following components: - Regulators. - Over Temperature warning and Shut down. This patch adds support for tps65218 mfd device. At this time only the regulator functionality is made available. Signed-off-by: Keerthy Signed-off-by: Lee Jones --- include/linux/mfd/tps65218.h | 284 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 284 insertions(+) create mode 100644 include/linux/mfd/tps65218.h (limited to 'include/linux') diff --git a/include/linux/mfd/tps65218.h b/include/linux/mfd/tps65218.h new file mode 100644 index 000000000000..d2e357df5a0e --- /dev/null +++ b/include/linux/mfd/tps65218.h @@ -0,0 +1,284 @@ +/* + * linux/mfd/tps65218.h + * + * Functions to access TPS65219 power management chip. + * + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether expressed or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License version 2 for more details. + */ + +#ifndef __LINUX_MFD_TPS65218_H +#define __LINUX_MFD_TPS65218_H + +#include +#include +#include +#include + +/* TPS chip id list */ +#define TPS65218 0xF0 + +/* I2C ID for TPS65218 part */ +#define TPS65218_I2C_ID 0x24 + +/* All register addresses */ +#define TPS65218_REG_CHIPID 0x00 +#define TPS65218_REG_INT1 0x01 +#define TPS65218_REG_INT2 0x02 +#define TPS65218_REG_INT_MASK1 0x03 +#define TPS65218_REG_INT_MASK2 0x04 +#define TPS65218_REG_STATUS 0x05 +#define TPS65218_REG_CONTROL 0x06 +#define TPS65218_REG_FLAG 0x07 + +#define TPS65218_REG_PASSWORD 0x10 +#define TPS65218_REG_ENABLE1 0x11 +#define TPS65218_REG_ENABLE2 0x12 +#define TPS65218_REG_CONFIG1 0x13 +#define TPS65218_REG_CONFIG2 0x14 +#define TPS65218_REG_CONFIG3 0x15 +#define TPS65218_REG_CONTROL_DCDC1 0x16 +#define TPS65218_REG_CONTROL_DCDC2 0x17 +#define TPS65218_REG_CONTROL_DCDC3 0x18 +#define TPS65218_REG_CONTROL_DCDC4 0x19 +#define TPS65218_REG_CONTRL_SLEW_RATE 0x1A +#define TPS65218_REG_CONTROL_LDO1 0x1B +#define TPS65218_REG_SEQ1 0x20 +#define TPS65218_REG_SEQ2 0x21 +#define TPS65218_REG_SEQ3 0x22 +#define TPS65218_REG_SEQ4 0x23 +#define TPS65218_REG_SEQ5 0x24 +#define TPS65218_REG_SEQ6 0x25 +#define TPS65218_REG_SEQ7 0x26 + +/* Register field definitions */ +#define TPS65218_CHIPID_CHIP_MASK 0xF8 +#define TPS65218_CHIPID_REV_MASK 0x07 + +#define TPS65218_INT1_VPRG BIT(5) +#define TPS65218_INT1_AC BIT(4) +#define TPS65218_INT1_PB BIT(3) +#define TPS65218_INT1_HOT BIT(2) +#define TPS65218_INT1_CC_AQC BIT(1) +#define TPS65218_INT1_PRGC BIT(0) + +#define TPS65218_INT2_LS3_F BIT(5) +#define TPS65218_INT2_LS2_F BIT(4) +#define TPS65218_INT2_LS1_F BIT(3) +#define TPS65218_INT2_LS3_I BIT(2) +#define TPS65218_INT2_LS2_I BIT(1) +#define TPS65218_INT2_LS1_I BIT(0) + +#define TPS65218_INT_MASK1_VPRG BIT(5) +#define TPS65218_INT_MASK1_AC BIT(4) +#define TPS65218_INT_MASK1_PB BIT(3) +#define TPS65218_INT_MASK1_HOT BIT(2) +#define TPS65218_INT_MASK1_CC_AQC BIT(1) +#define TPS65218_INT_MASK1_PRGC BIT(0) + +#define TPS65218_INT_MASK2_LS3_F BIT(5) +#define TPS65218_INT_MASK2_LS2_F BIT(4) +#define TPS65218_INT_MASK2_LS1_F BIT(3) +#define TPS65218_INT_MASK2_LS3_I BIT(2) +#define TPS65218_INT_MASK2_LS2_I BIT(1) +#define TPS65218_INT_MASK2_LS1_I BIT(0) + +#define TPS65218_STATUS_FSEAL BIT(7) +#define TPS65218_STATUS_EE BIT(6) +#define TPS65218_STATUS_AC_STATE BIT(5) +#define TPS65218_STATUS_PB_STATE BIT(4) +#define TPS65218_STATUS_STATE_MASK 0xC +#define TPS65218_STATUS_CC_STAT 0x3 + +#define TPS65218_CONTROL_OFFNPFO BIT(1) +#define TPS65218_CONTROL_CC_AQ BIT(0) + +#define TPS65218_FLAG_GPO3_FLG BIT(7) +#define TPS65218_FLAG_GPO2_FLG BIT(6) +#define TPS65218_FLAG_GPO1_FLG BIT(5) +#define TPS65218_FLAG_LDO1_FLG BIT(4) +#define TPS65218_FLAG_DC4_FLG BIT(3) +#define TPS65218_FLAG_DC3_FLG BIT(2) +#define TPS65218_FLAG_DC2_FLG BIT(1) +#define TPS65218_FLAG_DC1_FLG BIT(0) + +#define TPS65218_ENABLE1_DC6_EN BIT(5) +#define TPS65218_ENABLE1_DC5_EN BIT(4) +#define TPS65218_ENABLE1_DC4_EN BIT(3) +#define TPS65218_ENABLE1_DC3_EN BIT(2) +#define TPS65218_ENABLE1_DC2_EN BIT(1) +#define TPS65218_ENABLE1_DC1_EN BIT(0) + +#define TPS65218_ENABLE2_GPIO3 BIT(6) +#define TPS65218_ENABLE2_GPIO2 BIT(5) +#define TPS65218_ENABLE2_GPIO1 BIT(4) +#define TPS65218_ENABLE2_LS3_EN BIT(3) +#define TPS65218_ENABLE2_LS2_EN BIT(2) +#define TPS65218_ENABLE2_LS1_EN BIT(1) +#define TPS65218_ENABLE2_LDO1_EN BIT(0) + + +#define TPS65218_CONFIG1_TRST BIT(7) +#define TPS65218_CONFIG1_GPO2_BUF BIT(6) +#define TPS65218_CONFIG1_IO1_SEL BIT(5) +#define TPS65218_CONFIG1_PGDLY_MASK 0x18 +#define TPS65218_CONFIG1_STRICT BIT(2) +#define TPS65218_CONFIG1_UVLO_MASK 0x3 + +#define TPS65218_CONFIG2_DC12_RST BIT(7) +#define TPS65218_CONFIG2_UVLOHYS BIT(6) +#define TPS65218_CONFIG2_LS3ILIM_MASK 0xC +#define TPS65218_CONFIG2_LS2ILIM_MASK 0x3 + +#define TPS65218_CONFIG3_LS3NPFO BIT(5) +#define TPS65218_CONFIG3_LS2NPFO BIT(4) +#define TPS65218_CONFIG3_LS1NPFO BIT(3) +#define TPS65218_CONFIG3_LS3DCHRG BIT(2) +#define TPS65218_CONFIG3_LS2DCHRG BIT(1) +#define TPS65218_CONFIG3_LS1DCHRG BIT(0) + +#define TPS65218_CONTROL_DCDC1_PFM BIT(7) +#define TPS65218_CONTROL_DCDC1_MASK 0x7F + +#define TPS65218_CONTROL_DCDC2_PFM BIT(7) +#define TPS65218_CONTROL_DCDC2_MASK 0x3F + +#define TPS65218_CONTROL_DCDC3_PFM BIT(7) +#define TPS65218_CONTROL_DCDC3_MASK 0x3F + +#define TPS65218_CONTROL_DCDC4_PFM BIT(7) +#define TPS65218_CONTROL_DCDC4_MASK 0x3F + +#define TPS65218_SLEW_RATE_GO BIT(7) +#define TPS65218_SLEW_RATE_GODSBL BIT(6) +#define TPS65218_SLEW_RATE_SLEW_MASK 0x7 + +#define TPS65218_CONTROL_LDO1_MASK 0x3F + +#define TPS65218_SEQ1_DLY8 BIT(7) +#define TPS65218_SEQ1_DLY7 BIT(6) +#define TPS65218_SEQ1_DLY6 BIT(5) +#define TPS65218_SEQ1_DLY5 BIT(4) +#define TPS65218_SEQ1_DLY4 BIT(3) +#define TPS65218_SEQ1_DLY3 BIT(2) +#define TPS65218_SEQ1_DLY2 BIT(1) +#define TPS65218_SEQ1_DLY1 BIT(0) + +#define TPS65218_SEQ2_DLYFCTR BIT(7) +#define TPS65218_SEQ2_DLY9 BIT(0) + +#define TPS65218_SEQ3_DC2_SEQ_MASK 0xF0 +#define TPS65218_SEQ3_DC1_SEQ_MASK 0xF + +#define TPS65218_SEQ4_DC4_SEQ_MASK 0xF0 +#define TPS65218_SEQ4_DC3_SEQ_MASK 0xF + +#define TPS65218_SEQ5_DC6_SEQ_MASK 0xF0 +#define TPS65218_SEQ5_DC5_SEQ_MASK 0xF + +#define TPS65218_SEQ6_LS1_SEQ_MASK 0xF0 +#define TPS65218_SEQ6_LDO1_SEQ_MASK 0xF + +#define TPS65218_SEQ7_GPO3_SEQ_MASK 0xF0 +#define TPS65218_SEQ7_GPO1_SEQ_MASK 0xF +#define TPS65218_PROTECT_NONE 0 +#define TPS65218_PROTECT_L1 1 + +enum tps65218_regulator_id { + /* DCDC's */ + TPS65218_DCDC_1, + TPS65218_DCDC_2, + TPS65218_DCDC_3, + TPS65218_DCDC_4, + TPS65218_DCDC_5, + TPS65218_DCDC_6, + /* LDOs */ + TPS65218_LDO_1, +}; + +#define TPS65218_MAX_REG_ID TPS65218_LDO_1 + +/* Number of step-down converters available */ +#define TPS65218_NUM_DCDC 6 +/* Number of LDO voltage regulators available */ +#define TPS65218_NUM_LDO 1 +/* Number of total regulators available */ +#define TPS65218_NUM_REGULATOR (TPS65218_NUM_DCDC + TPS65218_NUM_LDO) + +/* Define the TPS65218 IRQ numbers */ +enum tps65218_irqs { + /* INT1 registers */ + TPS65218_PRGC_IRQ, + TPS65218_CC_AQC_IRQ, + TPS65218_HOT_IRQ, + TPS65218_PB_IRQ, + TPS65218_AC_IRQ, + TPS65218_VPRG_IRQ, + TPS65218_INVALID1_IRQ, + TPS65218_INVALID2_IRQ, + /* INT2 registers */ + TPS65218_LS1_I_IRQ, + TPS65218_LS2_I_IRQ, + TPS65218_LS3_I_IRQ, + TPS65218_LS1_F_IRQ, + TPS65218_LS2_F_IRQ, + TPS65218_LS3_F_IRQ, + TPS65218_INVALID3_IRQ, + TPS65218_INVALID4_IRQ, +}; + +/** + * struct tps_info - packages regulator constraints + * @id: Id of the regulator + * @name: Voltage regulator name + * @min_uV: minimum micro volts + * @max_uV: minimum micro volts + * + * This data is used to check the regualtor voltage limits while setting. + */ +struct tps_info { + int id; + const char *name; + int min_uV; + int max_uV; +}; + +/** + * struct tps65218 - tps65218 sub-driver chip access routines + * + * Device data may be used to access the TPS65218 chip + */ + +struct tps65218 { + struct device *dev; + unsigned int id; + + struct mutex tps_lock; /* lock guarding the data structure */ + /* IRQ Data */ + int irq; + u32 irq_mask; + struct regmap_irq_chip_data *irq_data; + struct regulator_desc desc[TPS65218_NUM_REGULATOR]; + struct regulator_dev *rdev[TPS65218_NUM_REGULATOR]; + struct tps_info *info[TPS65218_NUM_REGULATOR]; + struct regmap *regmap; +}; + +int tps65218_reg_read(struct tps65218 *tps, unsigned int reg, + unsigned int *val); +int tps65218_reg_write(struct tps65218 *tps, unsigned int reg, + unsigned int val, unsigned int level); +int tps65218_set_bits(struct tps65218 *tps, unsigned int reg, + unsigned int mask, unsigned int val, unsigned int level); +int tps65218_clear_bits(struct tps65218 *tps, unsigned int reg, + unsigned int mask, unsigned int level); + +#endif /* __LINUX_MFD_TPS65218_H */ -- cgit v1.2.3 From 730876be256603b4ee7225a125467d97a7ce9060 Mon Sep 17 00:00:00 2001 From: Roger Tseng Date: Wed, 12 Feb 2014 18:00:36 +0800 Subject: mfd: Add realtek USB card reader driver Realtek USB card reader provides a channel to transfer command or data to flash memory cards. This driver exports host instances for mmc and memstick subsystems and handles basic works. Acked-by: Greg Kroah-Hartman Signed-off-by: Roger Tseng Signed-off-by: Lee Jones --- include/linux/mfd/rtsx_usb.h | 628 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 628 insertions(+) create mode 100644 include/linux/mfd/rtsx_usb.h (limited to 'include/linux') diff --git a/include/linux/mfd/rtsx_usb.h b/include/linux/mfd/rtsx_usb.h new file mode 100644 index 000000000000..c446e4fd6b5c --- /dev/null +++ b/include/linux/mfd/rtsx_usb.h @@ -0,0 +1,628 @@ +/* Driver for Realtek RTS5139 USB card reader + * + * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see . + * + * Author: + * Roger Tseng + */ + +#ifndef __RTSX_USB_H +#define __RTSX_USB_H + +#include + +/* related module names */ +#define RTSX_USB_SD_CARD 0 +#define RTSX_USB_MS_CARD 1 + +/* endpoint numbers */ +#define EP_BULK_OUT 1 +#define EP_BULK_IN 2 +#define EP_INTR_IN 3 + +/* USB vendor requests */ +#define RTSX_USB_REQ_REG_OP 0x00 +#define RTSX_USB_REQ_POLL 0x02 + +/* miscellaneous parameters */ +#define MIN_DIV_N 60 +#define MAX_DIV_N 120 + +#define MAX_PHASE 15 +#define RX_TUNING_CNT 3 + +#define QFN24 0 +#define LQFP48 1 +#define CHECK_PKG(ucr, pkg) ((ucr)->package == (pkg)) + +/* data structures */ +struct rtsx_ucr { + u16 vendor_id; + u16 product_id; + + int package; + u8 ic_version; + bool is_rts5179; + + unsigned int cur_clk; + + u8 *cmd_buf; + unsigned int cmd_idx; + u8 *rsp_buf; + + struct usb_device *pusb_dev; + struct usb_interface *pusb_intf; + struct usb_sg_request current_sg; + unsigned char *iobuf; + dma_addr_t iobuf_dma; + + struct timer_list sg_timer; + struct mutex dev_mutex; +}; + +/* buffer size */ +#define IOBUF_SIZE 1024 + +/* prototypes of exported functions */ +extern int rtsx_usb_get_card_status(struct rtsx_ucr *ucr, u16 *status); + +extern int rtsx_usb_read_register(struct rtsx_ucr *ucr, u16 addr, u8 *data); +extern int rtsx_usb_write_register(struct rtsx_ucr *ucr, u16 addr, u8 mask, + u8 data); + +extern int rtsx_usb_ep0_write_register(struct rtsx_ucr *ucr, u16 addr, u8 mask, + u8 data); +extern int rtsx_usb_ep0_read_register(struct rtsx_ucr *ucr, u16 addr, + u8 *data); + +extern void rtsx_usb_add_cmd(struct rtsx_ucr *ucr, u8 cmd_type, + u16 reg_addr, u8 mask, u8 data); +extern int rtsx_usb_send_cmd(struct rtsx_ucr *ucr, u8 flag, int timeout); +extern int rtsx_usb_get_rsp(struct rtsx_ucr *ucr, int rsp_len, int timeout); +extern int rtsx_usb_transfer_data(struct rtsx_ucr *ucr, unsigned int pipe, + void *buf, unsigned int len, int use_sg, + unsigned int *act_len, int timeout); + +extern int rtsx_usb_read_ppbuf(struct rtsx_ucr *ucr, u8 *buf, int buf_len); +extern int rtsx_usb_write_ppbuf(struct rtsx_ucr *ucr, u8 *buf, int buf_len); +extern int rtsx_usb_switch_clock(struct rtsx_ucr *ucr, unsigned int card_clock, + u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk); +extern int rtsx_usb_card_exclusive_check(struct rtsx_ucr *ucr, int card); + +/* card status */ +#define SD_CD 0x01 +#define MS_CD 0x02 +#define XD_CD 0x04 +#define CD_MASK (SD_CD | MS_CD | XD_CD) +#define SD_WP 0x08 + +/* reader command field offset & parameters */ +#define READ_REG_CMD 0 +#define WRITE_REG_CMD 1 +#define CHECK_REG_CMD 2 + +#define PACKET_TYPE 4 +#define CNT_H 5 +#define CNT_L 6 +#define STAGE_FLAG 7 +#define CMD_OFFSET 8 +#define SEQ_WRITE_DATA_OFFSET 12 + +#define BATCH_CMD 0 +#define SEQ_READ 1 +#define SEQ_WRITE 2 + +#define STAGE_R 0x01 +#define STAGE_DI 0x02 +#define STAGE_DO 0x04 +#define STAGE_MS_STATUS 0x08 +#define STAGE_XD_STATUS 0x10 +#define MODE_C 0x00 +#define MODE_CR (STAGE_R) +#define MODE_CDIR (STAGE_R | STAGE_DI) +#define MODE_CDOR (STAGE_R | STAGE_DO) + +#define EP0_OP_SHIFT 14 +#define EP0_READ_REG_CMD 2 +#define EP0_WRITE_REG_CMD 3 + +#define rtsx_usb_cmd_hdr_tag(ucr) \ + do { \ + ucr->cmd_buf[0] = 'R'; \ + ucr->cmd_buf[1] = 'T'; \ + ucr->cmd_buf[2] = 'C'; \ + ucr->cmd_buf[3] = 'R'; \ + } while (0) + +static inline void rtsx_usb_init_cmd(struct rtsx_ucr *ucr) +{ + rtsx_usb_cmd_hdr_tag(ucr); + ucr->cmd_idx = 0; + ucr->cmd_buf[PACKET_TYPE] = BATCH_CMD; +} + +/* internal register address */ +#define FPDCTL 0xFC00 +#define SSC_DIV_N_0 0xFC07 +#define SSC_CTL1 0xFC09 +#define SSC_CTL2 0xFC0A +#define CFG_MODE 0xFC0E +#define CFG_MODE_1 0xFC0F +#define RCCTL 0xFC14 +#define SOF_WDOG 0xFC28 +#define SYS_DUMMY0 0xFC30 + +#define MS_BLKEND 0xFD30 +#define MS_READ_START 0xFD31 +#define MS_READ_COUNT 0xFD32 +#define MS_WRITE_START 0xFD33 +#define MS_WRITE_COUNT 0xFD34 +#define MS_COMMAND 0xFD35 +#define MS_OLD_BLOCK_0 0xFD36 +#define MS_OLD_BLOCK_1 0xFD37 +#define MS_NEW_BLOCK_0 0xFD38 +#define MS_NEW_BLOCK_1 0xFD39 +#define MS_LOG_BLOCK_0 0xFD3A +#define MS_LOG_BLOCK_1 0xFD3B +#define MS_BUS_WIDTH 0xFD3C +#define MS_PAGE_START 0xFD3D +#define MS_PAGE_LENGTH 0xFD3E +#define MS_CFG 0xFD40 +#define MS_TPC 0xFD41 +#define MS_TRANS_CFG 0xFD42 +#define MS_TRANSFER 0xFD43 +#define MS_INT_REG 0xFD44 +#define MS_BYTE_CNT 0xFD45 +#define MS_SECTOR_CNT_L 0xFD46 +#define MS_SECTOR_CNT_H 0xFD47 +#define MS_DBUS_H 0xFD48 + +#define CARD_DMA1_CTL 0xFD5C +#define CARD_PULL_CTL1 0xFD60 +#define CARD_PULL_CTL2 0xFD61 +#define CARD_PULL_CTL3 0xFD62 +#define CARD_PULL_CTL4 0xFD63 +#define CARD_PULL_CTL5 0xFD64 +#define CARD_PULL_CTL6 0xFD65 +#define CARD_EXIST 0xFD6F +#define CARD_INT_PEND 0xFD71 + +#define LDO_POWER_CFG 0xFD7B + +#define SD_CFG1 0xFDA0 +#define SD_CFG2 0xFDA1 +#define SD_CFG3 0xFDA2 +#define SD_STAT1 0xFDA3 +#define SD_STAT2 0xFDA4 +#define SD_BUS_STAT 0xFDA5 +#define SD_PAD_CTL 0xFDA6 +#define SD_SAMPLE_POINT_CTL 0xFDA7 +#define SD_PUSH_POINT_CTL 0xFDA8 +#define SD_CMD0 0xFDA9 +#define SD_CMD1 0xFDAA +#define SD_CMD2 0xFDAB +#define SD_CMD3 0xFDAC +#define SD_CMD4 0xFDAD +#define SD_CMD5 0xFDAE +#define SD_BYTE_CNT_L 0xFDAF +#define SD_BYTE_CNT_H 0xFDB0 +#define SD_BLOCK_CNT_L 0xFDB1 +#define SD_BLOCK_CNT_H 0xFDB2 +#define SD_TRANSFER 0xFDB3 +#define SD_CMD_STATE 0xFDB5 +#define SD_DATA_STATE 0xFDB6 +#define SD_VPCLK0_CTL 0xFC2A +#define SD_VPCLK1_CTL 0xFC2B +#define SD_DCMPS0_CTL 0xFC2C +#define SD_DCMPS1_CTL 0xFC2D + +#define CARD_DMA1_CTL 0xFD5C + +#define HW_VERSION 0xFC01 + +#define SSC_CLK_FPGA_SEL 0xFC02 +#define CLK_DIV 0xFC03 +#define SFSM_ED 0xFC04 + +#define CD_DEGLITCH_WIDTH 0xFC20 +#define CD_DEGLITCH_EN 0xFC21 +#define AUTO_DELINK_EN 0xFC23 + +#define FPGA_PULL_CTL 0xFC1D +#define CARD_CLK_SOURCE 0xFC2E + +#define CARD_SHARE_MODE 0xFD51 +#define CARD_DRIVE_SEL 0xFD52 +#define CARD_STOP 0xFD53 +#define CARD_OE 0xFD54 +#define CARD_AUTO_BLINK 0xFD55 +#define CARD_GPIO 0xFD56 +#define SD30_DRIVE_SEL 0xFD57 + +#define CARD_DATA_SOURCE 0xFD5D +#define CARD_SELECT 0xFD5E + +#define CARD_CLK_EN 0xFD79 +#define CARD_PWR_CTL 0xFD7A + +#define OCPCTL 0xFD80 +#define OCPPARA1 0xFD81 +#define OCPPARA2 0xFD82 +#define OCPSTAT 0xFD83 + +#define HS_USB_STAT 0xFE01 +#define HS_VCONTROL 0xFE26 +#define HS_VSTAIN 0xFE27 +#define HS_VLOADM 0xFE28 +#define HS_VSTAOUT 0xFE29 + +#define MC_IRQ 0xFF00 +#define MC_IRQEN 0xFF01 +#define MC_FIFO_CTL 0xFF02 +#define MC_FIFO_BC0 0xFF03 +#define MC_FIFO_BC1 0xFF04 +#define MC_FIFO_STAT 0xFF05 +#define MC_FIFO_MODE 0xFF06 +#define MC_FIFO_RD_PTR0 0xFF07 +#define MC_FIFO_RD_PTR1 0xFF08 +#define MC_DMA_CTL 0xFF10 +#define MC_DMA_TC0 0xFF11 +#define MC_DMA_TC1 0xFF12 +#define MC_DMA_TC2 0xFF13 +#define MC_DMA_TC3 0xFF14 +#define MC_DMA_RST 0xFF15 + +#define RBUF_SIZE_MASK 0xFBFF +#define RBUF_BASE 0xF000 +#define PPBUF_BASE1 0xF800 +#define PPBUF_BASE2 0xFA00 + +/* internal register value macros */ +#define POWER_OFF 0x03 +#define PARTIAL_POWER_ON 0x02 +#define POWER_ON 0x00 +#define POWER_MASK 0x03 +#define LDO3318_PWR_MASK 0x0C +#define LDO_ON 0x00 +#define LDO_SUSPEND 0x08 +#define LDO_OFF 0x0C +#define DV3318_AUTO_PWR_OFF 0x10 +#define FORCE_LDO_POWERB 0x60 + +/* LDO_POWER_CFG */ +#define TUNE_SD18_MASK 0x1C +#define TUNE_SD18_1V7 0x00 +#define TUNE_SD18_1V8 (0x01 << 2) +#define TUNE_SD18_1V9 (0x02 << 2) +#define TUNE_SD18_2V0 (0x03 << 2) +#define TUNE_SD18_2V7 (0x04 << 2) +#define TUNE_SD18_2V8 (0x05 << 2) +#define TUNE_SD18_2V9 (0x06 << 2) +#define TUNE_SD18_3V3 (0x07 << 2) + +/* CLK_DIV */ +#define CLK_CHANGE 0x80 +#define CLK_DIV_1 0x00 +#define CLK_DIV_2 0x01 +#define CLK_DIV_4 0x02 +#define CLK_DIV_8 0x03 + +#define SSC_POWER_MASK 0x01 +#define SSC_POWER_DOWN 0x01 +#define SSC_POWER_ON 0x00 + +#define FPGA_VER 0x80 +#define HW_VER_MASK 0x0F + +#define EXTEND_DMA1_ASYNC_SIGNAL 0x02 + +/* CFG_MODE*/ +#define XTAL_FREE 0x80 +#define CLK_MODE_MASK 0x03 +#define CLK_MODE_12M_XTAL 0x00 +#define CLK_MODE_NON_XTAL 0x01 +#define CLK_MODE_24M_OSC 0x02 +#define CLK_MODE_48M_OSC 0x03 + +/* CFG_MODE_1*/ +#define RTS5179 0x02 + +#define NYET_EN 0x01 +#define NYET_MSAK 0x01 + +#define SD30_DRIVE_MASK 0x07 +#define SD20_DRIVE_MASK 0x03 + +#define DISABLE_SD_CD 0x08 +#define DISABLE_MS_CD 0x10 +#define DISABLE_XD_CD 0x20 +#define SD_CD_DEGLITCH_EN 0x01 +#define MS_CD_DEGLITCH_EN 0x02 +#define XD_CD_DEGLITCH_EN 0x04 + +#define CARD_SHARE_LQFP48 0x04 +#define CARD_SHARE_QFN24 0x00 +#define CARD_SHARE_LQFP_SEL 0x04 +#define CARD_SHARE_XD 0x00 +#define CARD_SHARE_SD 0x01 +#define CARD_SHARE_MS 0x02 +#define CARD_SHARE_MASK 0x03 + + +/* SD30_DRIVE_SEL */ +#define DRIVER_TYPE_A 0x05 +#define DRIVER_TYPE_B 0x03 +#define DRIVER_TYPE_C 0x02 +#define DRIVER_TYPE_D 0x01 + +/* SD_BUS_STAT */ +#define SD_CLK_TOGGLE_EN 0x80 +#define SD_CLK_FORCE_STOP 0x40 +#define SD_DAT3_STATUS 0x10 +#define SD_DAT2_STATUS 0x08 +#define SD_DAT1_STATUS 0x04 +#define SD_DAT0_STATUS 0x02 +#define SD_CMD_STATUS 0x01 + +/* SD_PAD_CTL */ +#define SD_IO_USING_1V8 0x80 +#define SD_IO_USING_3V3 0x7F +#define TYPE_A_DRIVING 0x00 +#define TYPE_B_DRIVING 0x01 +#define TYPE_C_DRIVING 0x02 +#define TYPE_D_DRIVING 0x03 + +/* CARD_CLK_EN */ +#define SD_CLK_EN 0x04 +#define MS_CLK_EN 0x08 + +/* CARD_SELECT */ +#define SD_MOD_SEL 2 +#define MS_MOD_SEL 3 + +/* CARD_SHARE_MODE */ +#define CARD_SHARE_LQFP48 0x04 +#define CARD_SHARE_QFN24 0x00 +#define CARD_SHARE_LQFP_SEL 0x04 +#define CARD_SHARE_XD 0x00 +#define CARD_SHARE_SD 0x01 +#define CARD_SHARE_MS 0x02 +#define CARD_SHARE_MASK 0x03 + +/* SSC_CTL1 */ +#define SSC_RSTB 0x80 +#define SSC_8X_EN 0x40 +#define SSC_FIX_FRAC 0x20 +#define SSC_SEL_1M 0x00 +#define SSC_SEL_2M 0x08 +#define SSC_SEL_4M 0x10 +#define SSC_SEL_8M 0x18 + +/* SSC_CTL2 */ +#define SSC_DEPTH_MASK 0x03 +#define SSC_DEPTH_DISALBE 0x00 +#define SSC_DEPTH_2M 0x01 +#define SSC_DEPTH_1M 0x02 +#define SSC_DEPTH_512K 0x03 + +/* SD_VPCLK0_CTL */ +#define PHASE_CHANGE 0x80 +#define PHASE_NOT_RESET 0x40 + +/* SD_TRANSFER */ +#define SD_TRANSFER_START 0x80 +#define SD_TRANSFER_END 0x40 +#define SD_STAT_IDLE 0x20 +#define SD_TRANSFER_ERR 0x10 +#define SD_TM_NORMAL_WRITE 0x00 +#define SD_TM_AUTO_WRITE_3 0x01 +#define SD_TM_AUTO_WRITE_4 0x02 +#define SD_TM_AUTO_READ_3 0x05 +#define SD_TM_AUTO_READ_4 0x06 +#define SD_TM_CMD_RSP 0x08 +#define SD_TM_AUTO_WRITE_1 0x09 +#define SD_TM_AUTO_WRITE_2 0x0A +#define SD_TM_NORMAL_READ 0x0C +#define SD_TM_AUTO_READ_1 0x0D +#define SD_TM_AUTO_READ_2 0x0E +#define SD_TM_AUTO_TUNING 0x0F + +/* SD_CFG1 */ +#define SD_CLK_DIVIDE_0 0x00 +#define SD_CLK_DIVIDE_256 0xC0 +#define SD_CLK_DIVIDE_128 0x80 +#define SD_CLK_DIVIDE_MASK 0xC0 +#define SD_BUS_WIDTH_1BIT 0x00 +#define SD_BUS_WIDTH_4BIT 0x01 +#define SD_BUS_WIDTH_8BIT 0x02 +#define SD_ASYNC_FIFO_RST 0x10 +#define SD_20_MODE 0x00 +#define SD_DDR_MODE 0x04 +#define SD_30_MODE 0x08 + +/* SD_CFG2 */ +#define SD_CALCULATE_CRC7 0x00 +#define SD_NO_CALCULATE_CRC7 0x80 +#define SD_CHECK_CRC16 0x00 +#define SD_NO_CHECK_CRC16 0x40 +#define SD_WAIT_CRC_TO_EN 0x20 +#define SD_WAIT_BUSY_END 0x08 +#define SD_NO_WAIT_BUSY_END 0x00 +#define SD_CHECK_CRC7 0x00 +#define SD_NO_CHECK_CRC7 0x04 +#define SD_RSP_LEN_0 0x00 +#define SD_RSP_LEN_6 0x01 +#define SD_RSP_LEN_17 0x02 +#define SD_RSP_TYPE_R0 0x04 +#define SD_RSP_TYPE_R1 0x01 +#define SD_RSP_TYPE_R1b 0x09 +#define SD_RSP_TYPE_R2 0x02 +#define SD_RSP_TYPE_R3 0x05 +#define SD_RSP_TYPE_R4 0x05 +#define SD_RSP_TYPE_R5 0x01 +#define SD_RSP_TYPE_R6 0x01 +#define SD_RSP_TYPE_R7 0x01 + +/* SD_STAT1 */ +#define SD_CRC7_ERR 0x80 +#define SD_CRC16_ERR 0x40 +#define SD_CRC_WRITE_ERR 0x20 +#define SD_CRC_WRITE_ERR_MASK 0x1C +#define GET_CRC_TIME_OUT 0x02 +#define SD_TUNING_COMPARE_ERR 0x01 + +/* SD_DATA_STATE */ +#define SD_DATA_IDLE 0x80 + +/* CARD_DATA_SOURCE */ +#define PINGPONG_BUFFER 0x01 +#define RING_BUFFER 0x00 + +/* CARD_OE */ +#define SD_OUTPUT_EN 0x04 +#define MS_OUTPUT_EN 0x08 + +/* CARD_STOP */ +#define SD_STOP 0x04 +#define MS_STOP 0x08 +#define SD_CLR_ERR 0x40 +#define MS_CLR_ERR 0x80 + +/* CARD_CLK_SOURCE */ +#define CRC_FIX_CLK (0x00 << 0) +#define CRC_VAR_CLK0 (0x01 << 0) +#define CRC_VAR_CLK1 (0x02 << 0) +#define SD30_FIX_CLK (0x00 << 2) +#define SD30_VAR_CLK0 (0x01 << 2) +#define SD30_VAR_CLK1 (0x02 << 2) +#define SAMPLE_FIX_CLK (0x00 << 4) +#define SAMPLE_VAR_CLK0 (0x01 << 4) +#define SAMPLE_VAR_CLK1 (0x02 << 4) + +/* SD_SAMPLE_POINT_CTL */ +#define DDR_FIX_RX_DAT 0x00 +#define DDR_VAR_RX_DAT 0x80 +#define DDR_FIX_RX_DAT_EDGE 0x00 +#define DDR_FIX_RX_DAT_14_DELAY 0x40 +#define DDR_FIX_RX_CMD 0x00 +#define DDR_VAR_RX_CMD 0x20 +#define DDR_FIX_RX_CMD_POS_EDGE 0x00 +#define DDR_FIX_RX_CMD_14_DELAY 0x10 +#define SD20_RX_POS_EDGE 0x00 +#define SD20_RX_14_DELAY 0x08 +#define SD20_RX_SEL_MASK 0x08 + +/* SD_PUSH_POINT_CTL */ +#define DDR_FIX_TX_CMD_DAT 0x00 +#define DDR_VAR_TX_CMD_DAT 0x80 +#define DDR_FIX_TX_DAT_14_TSU 0x00 +#define DDR_FIX_TX_DAT_12_TSU 0x40 +#define DDR_FIX_TX_CMD_NEG_EDGE 0x00 +#define DDR_FIX_TX_CMD_14_AHEAD 0x20 +#define SD20_TX_NEG_EDGE 0x00 +#define SD20_TX_14_AHEAD 0x10 +#define SD20_TX_SEL_MASK 0x10 +#define DDR_VAR_SDCLK_POL_SWAP 0x01 + +/* MS_CFG */ +#define SAMPLE_TIME_RISING 0x00 +#define SAMPLE_TIME_FALLING 0x80 +#define PUSH_TIME_DEFAULT 0x00 +#define PUSH_TIME_ODD 0x40 +#define NO_EXTEND_TOGGLE 0x00 +#define EXTEND_TOGGLE_CHK 0x20 +#define MS_BUS_WIDTH_1 0x00 +#define MS_BUS_WIDTH_4 0x10 +#define MS_BUS_WIDTH_8 0x18 +#define MS_2K_SECTOR_MODE 0x04 +#define MS_512_SECTOR_MODE 0x00 +#define MS_TOGGLE_TIMEOUT_EN 0x00 +#define MS_TOGGLE_TIMEOUT_DISEN 0x01 +#define MS_NO_CHECK_INT 0x02 + +/* MS_TRANS_CFG */ +#define WAIT_INT 0x80 +#define NO_WAIT_INT 0x00 +#define NO_AUTO_READ_INT_REG 0x00 +#define AUTO_READ_INT_REG 0x40 +#define MS_CRC16_ERR 0x20 +#define MS_RDY_TIMEOUT 0x10 +#define MS_INT_CMDNK 0x08 +#define MS_INT_BREQ 0x04 +#define MS_INT_ERR 0x02 +#define MS_INT_CED 0x01 + +/* MS_TRANSFER */ +#define MS_TRANSFER_START 0x80 +#define MS_TRANSFER_END 0x40 +#define MS_TRANSFER_ERR 0x20 +#define MS_BS_STATE 0x10 +#define MS_TM_READ_BYTES 0x00 +#define MS_TM_NORMAL_READ 0x01 +#define MS_TM_WRITE_BYTES 0x04 +#define MS_TM_NORMAL_WRITE 0x05 +#define MS_TM_AUTO_READ 0x08 +#define MS_TM_AUTO_WRITE 0x0C +#define MS_TM_SET_CMD 0x06 +#define MS_TM_COPY_PAGE 0x07 +#define MS_TM_MULTI_READ 0x02 +#define MS_TM_MULTI_WRITE 0x03 + +/* MC_FIFO_CTL */ +#define FIFO_FLUSH 0x01 + +/* MC_DMA_RST */ +#define DMA_RESET 0x01 + +/* MC_DMA_CTL */ +#define DMA_TC_EQ_0 0x80 +#define DMA_DIR_TO_CARD 0x00 +#define DMA_DIR_FROM_CARD 0x02 +#define DMA_EN 0x01 +#define DMA_128 (0 << 2) +#define DMA_256 (1 << 2) +#define DMA_512 (2 << 2) +#define DMA_1024 (3 << 2) +#define DMA_PACK_SIZE_MASK 0x0C + +/* CARD_INT_PEND */ +#define XD_INT 0x10 +#define MS_INT 0x08 +#define SD_INT 0x04 + +/* LED operations*/ +static inline int rtsx_usb_turn_on_led(struct rtsx_ucr *ucr) +{ + return rtsx_usb_ep0_write_register(ucr, CARD_GPIO, 0x03, 0x02); +} + +static inline int rtsx_usb_turn_off_led(struct rtsx_ucr *ucr) +{ + return rtsx_usb_ep0_write_register(ucr, CARD_GPIO, 0x03, 0x03); +} + +/* HW error clearing */ +static inline void rtsx_usb_clear_fsm_err(struct rtsx_ucr *ucr) +{ + rtsx_usb_ep0_write_register(ucr, SFSM_ED, 0xf8, 0xf8); +} + +static inline void rtsx_usb_clear_dma_err(struct rtsx_ucr *ucr) +{ + rtsx_usb_ep0_write_register(ucr, MC_FIFO_CTL, + FIFO_FLUSH, FIFO_FLUSH); + rtsx_usb_ep0_write_register(ucr, MC_DMA_RST, DMA_RESET, DMA_RESET); +} +#endif /* __RTS51139_H */ -- cgit v1.2.3 From c1d12c784c49980e4cbe57b7e6cc14b406449099 Mon Sep 17 00:00:00 2001 From: "Opensource [Steve Twiss]" Date: Fri, 14 Feb 2014 14:08:11 +0000 Subject: mfd: da9063: Add support for production silicon variant code Add the correct silicon variant code ID (0x5) to the driver. This new code is the 'production' variant code ID for DA9063. This patch will remove the older variant code ID which matches the pre-production silicon ID (0x3) for the DA9063 chip. There is also some small amount of correction done in this patch: it splits the revision code and correctly names it according to the hardware specification and moves the dev_info() call before the variant ID test. Signed-off-by: Opensource [Steve Twiss] Signed-off-by: Lee Jones --- include/linux/mfd/da9063/core.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mfd/da9063/core.h b/include/linux/mfd/da9063/core.h index 2d2a0af675fd..00a9aac5d1e8 100644 --- a/include/linux/mfd/da9063/core.h +++ b/include/linux/mfd/da9063/core.h @@ -33,6 +33,10 @@ enum da9063_models { PMIC_DA9063 = 0x61, }; +enum da9063_variant_codes { + PMIC_DA9063_BB = 0x5 +}; + /* Interrupts */ enum da9063_irqs { DA9063_IRQ_ONKEY = 0, @@ -72,7 +76,7 @@ struct da9063 { /* Device */ struct device *dev; unsigned short model; - unsigned short revision; + unsigned char variant_code; unsigned int flags; /* Control interface */ -- cgit v1.2.3 From 6cec365e3eba3dd8c864056d8d3fd9e73ab8dd7a Mon Sep 17 00:00:00 2001 From: Vincent Donnefort Date: Fri, 14 Feb 2014 15:01:53 +0100 Subject: mfd: lpc_ich: Convert ICH GPIOs IDs to enum All those IDs are arbitrary and so can be encapsulated into an enumeration. Signed-off-by: Vincent Donnefort Signed-off-by: Lee Jones --- include/linux/mfd/lpc_ich.h | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/lpc_ich.h b/include/linux/mfd/lpc_ich.h index 3e1df644c407..293b06209b9c 100644 --- a/include/linux/mfd/lpc_ich.h +++ b/include/linux/mfd/lpc_ich.h @@ -31,13 +31,15 @@ #define ICH_RES_GPE0 1 /* GPIO compatibility */ -#define ICH_I3100_GPIO 0x401 -#define ICH_V5_GPIO 0x501 -#define ICH_V6_GPIO 0x601 -#define ICH_V7_GPIO 0x701 -#define ICH_V9_GPIO 0x801 -#define ICH_V10CORP_GPIO 0xa01 -#define ICH_V10CONS_GPIO 0xa11 +enum { + ICH_I3100_GPIO, + ICH_V5_GPIO, + ICH_V6_GPIO, + ICH_V7_GPIO, + ICH_V9_GPIO, + ICH_V10CORP_GPIO, + ICH_V10CONS_GPIO, +}; struct lpc_ich_info { char name[32]; -- cgit v1.2.3 From facd9939403cb5769190054a600474399e776e3a Mon Sep 17 00:00:00 2001 From: Vincent Donnefort Date: Fri, 14 Feb 2014 15:01:54 +0100 Subject: mfd: lpc_ich: Add support for Intel Avoton GPIOs Signed-off-by: Vincent Donnefort Signed-off-by: Lee Jones --- include/linux/mfd/lpc_ich.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mfd/lpc_ich.h b/include/linux/mfd/lpc_ich.h index 293b06209b9c..b2364dd026a6 100644 --- a/include/linux/mfd/lpc_ich.h +++ b/include/linux/mfd/lpc_ich.h @@ -39,6 +39,7 @@ enum { ICH_V9_GPIO, ICH_V10CORP_GPIO, ICH_V10CONS_GPIO, + AVOTON_GPIO, }; struct lpc_ich_info { -- cgit v1.2.3 From 16263f2879afecb7772f4bae238bca66352ecffe Mon Sep 17 00:00:00 2001 From: "Opensource [Anthony Olech]" Date: Wed, 19 Feb 2014 16:32:46 +0000 Subject: mfd: da9052: Extend support to a new chip Add the hash define for the new variant of the DA9053 PMIC called BC. Signed-off-by: Anthony Olech Signed-off-by: Lee Jones --- include/linux/mfd/da9052/da9052.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mfd/da9052/da9052.h b/include/linux/mfd/da9052/da9052.h index 21e21b81cc75..bba65f51a0b5 100644 --- a/include/linux/mfd/da9052/da9052.h +++ b/include/linux/mfd/da9052/da9052.h @@ -83,6 +83,7 @@ enum da9052_chip_id { DA9053_AA, DA9053_BA, DA9053_BB, + DA9053_BC, }; struct da9052_pdata; -- cgit v1.2.3 From bc866fc7a8c4322de40b694ffcfcdda50ab82f35 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 26 Feb 2014 10:59:19 -0800 Subject: mfd: pm8xxx: Move pm8xxx-irq.c contents into only driver that uses it The pm8xxx-irq.c code is practically mandatory given that the pm8921-core driver will WARN about it missing and the Kconfig marks it as default y when a PM8xxx chips is enabled. The only reason the file was split out was because we planned to support other pm8xxx chips with different pm8xxx-core.c files. Now that we have DT on ARM this isn't necessary because we should be able to support all the ssbi based PM8xxx chips in one driver and one file with no data bloat. Let's move this code into the only driver that uses it right now (pm8921) so that it's always compiled when needed. In the future we can rename pm8921-core.c to something more generic. Signed-off-by: Stephen Boyd Signed-off-by: Lee Jones --- include/linux/mfd/pm8xxx/irq.h | 23 ----------------------- 1 file changed, 23 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/pm8xxx/irq.h b/include/linux/mfd/pm8xxx/irq.h index f83d6b43ecbb..1a11b02383f0 100644 --- a/include/linux/mfd/pm8xxx/irq.h +++ b/include/linux/mfd/pm8xxx/irq.h @@ -33,27 +33,4 @@ struct pm8xxx_irq_platform_data { int irq_trigger_flag; }; -struct pm_irq_chip; - -#ifdef CONFIG_MFD_PM8XXX_IRQ -int pm8xxx_get_irq_stat(struct pm_irq_chip *chip, int irq); -struct pm_irq_chip *pm8xxx_irq_init(struct device *dev, - const struct pm8xxx_irq_platform_data *pdata); -int pm8xxx_irq_exit(struct pm_irq_chip *chip); -#else -static inline int pm8xxx_get_irq_stat(struct pm_irq_chip *chip, int irq) -{ - return -ENXIO; -} -static inline struct pm_irq_chip *pm8xxx_irq_init( - const struct device *dev, - const struct pm8xxx_irq_platform_data *pdata) -{ - return ERR_PTR(-ENXIO); -} -static inline int pm8xxx_irq_exit(struct pm_irq_chip *chip) -{ - return -ENXIO; -} -#endif /* CONFIG_MFD_PM8XXX_IRQ */ #endif /* __MFD_PM8XXX_IRQ_H */ -- cgit v1.2.3 From dc1a95ccaa1158948bbc6648d6dadc534a30ed92 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 26 Feb 2014 10:59:21 -0800 Subject: mfd: pm8921: Migrate to irqdomains Convert this driver to use irqdomains so that the PMIC's child devices can be converted to devicetree. Acked-by: Lee Jones Signed-off-by: Stephen Boyd --- include/linux/mfd/pm8xxx/irq.h | 36 ------------------------------------ include/linux/mfd/pm8xxx/pm8921.h | 30 ------------------------------ 2 files changed, 66 deletions(-) delete mode 100644 include/linux/mfd/pm8xxx/irq.h delete mode 100644 include/linux/mfd/pm8xxx/pm8921.h (limited to 'include/linux') diff --git a/include/linux/mfd/pm8xxx/irq.h b/include/linux/mfd/pm8xxx/irq.h deleted file mode 100644 index 1a11b02383f0..000000000000 --- a/include/linux/mfd/pm8xxx/irq.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Copyright (c) 2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -/* - * Qualcomm PMIC irq 8xxx driver header file - * - */ - -#ifndef __MFD_PM8XXX_IRQ_H -#define __MFD_PM8XXX_IRQ_H - -#include -#include - -struct pm8xxx_irq_core_data { - u32 rev; - int nirqs; -}; - -struct pm8xxx_irq_platform_data { - int irq_base; - struct pm8xxx_irq_core_data irq_cdata; - int devirq; - int irq_trigger_flag; -}; - -#endif /* __MFD_PM8XXX_IRQ_H */ diff --git a/include/linux/mfd/pm8xxx/pm8921.h b/include/linux/mfd/pm8xxx/pm8921.h deleted file mode 100644 index 00fa3de7659d..000000000000 --- a/include/linux/mfd/pm8xxx/pm8921.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Copyright (c) 2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -/* - * Qualcomm PMIC 8921 driver header file - * - */ - -#ifndef __MFD_PM8921_H -#define __MFD_PM8921_H - -#include - -#define PM8921_NR_IRQS 256 - -struct pm8921_platform_data { - int irq_base; - struct pm8xxx_irq_platform_data *irq_pdata; -}; - -#endif -- cgit v1.2.3 From 559c04f6f116075a1ebead411666c7ab47dcc7fe Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 26 Feb 2014 10:59:22 -0800 Subject: mfd: ssbi: Add regmap read/write helpers Add read and write helper functions that the pm8921-core driver can use to read and write ssbi registers via a "no-bus" regmap. Signed-off-by: Stephen Boyd Signed-off-by: Lee Jones --- include/linux/ssbi.h | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ssbi.h b/include/linux/ssbi.h index bcbb642a7641..087b08a4d333 100644 --- a/include/linux/ssbi.h +++ b/include/linux/ssbi.h @@ -20,4 +20,24 @@ int ssbi_write(struct device *dev, u16 addr, const u8 *buf, int len); int ssbi_read(struct device *dev, u16 addr, u8 *buf, int len); +static inline int +ssbi_reg_read(void *context, unsigned int reg, unsigned int *val) +{ + int ret; + u8 v; + + ret = ssbi_read(context, reg, &v, 1); + if (!ret) + *val = v; + + return ret; +} + +static inline int +ssbi_reg_write(void *context, unsigned int reg, unsigned int val) +{ + u8 v = val; + return ssbi_write(context, reg, &v, 1); +} + #endif -- cgit v1.2.3 From 9fc2b9ca99428b54e6bbfd2d7bf0ccc1c594f1f5 Mon Sep 17 00:00:00 2001 From: "Opensource [Steve Twiss]" Date: Thu, 6 Mar 2014 16:40:02 +0000 Subject: mfd: da9063: Upgrade of register definitions to support production silicon This patch updates the register definitions for DA9063 to support the production silicon variant code ID (0x5). These changes are not backwards compatible with the previous register definitions and can only be used with the production variant of DA9063. Signed-off-by: Opensource [Steve Twiss] Signed-off-by: Lee Jones --- include/linux/mfd/da9063/registers.h | 120 ++++++++++++++++++----------------- 1 file changed, 62 insertions(+), 58 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/da9063/registers.h b/include/linux/mfd/da9063/registers.h index 5834813fb5f3..09a85c699da1 100644 --- a/include/linux/mfd/da9063/registers.h +++ b/include/linux/mfd/da9063/registers.h @@ -17,11 +17,7 @@ #define _DA9063_REG_H #define DA9063_I2C_PAGE_SEL_SHIFT 1 - #define DA9063_EVENT_REG_NUM 4 -#define DA9210_EVENT_REG_NUM 2 -#define DA9063_EXT_EVENT_REG_NUM (DA9063_EVENT_REG_NUM + \ - DA9210_EVENT_REG_NUM) /* Page selection I2C or SPI always in the begining of any page. */ /* Page 0 : I2C access 0x000 - 0x0FF SPI access 0x000 - 0x07F */ @@ -61,9 +57,9 @@ #define DA9063_REG_GPIO_10_11 0x1A #define DA9063_REG_GPIO_12_13 0x1B #define DA9063_REG_GPIO_14_15 0x1C -#define DA9063_REG_GPIO_MODE_0_7 0x1D -#define DA9063_REG_GPIO_MODE_8_15 0x1E -#define DA9063_REG_GPIO_SWITCH_CONT 0x1F +#define DA9063_REG_GPIO_MODE0_7 0x1D +#define DA9063_REG_GPIO_MODE8_15 0x1E +#define DA9063_REG_SWITCH_CONT 0x1F /* Regulator Control Registers */ #define DA9063_REG_BCORE2_CONT 0x20 @@ -83,7 +79,7 @@ #define DA9063_REG_LDO9_CONT 0x2E #define DA9063_REG_LDO10_CONT 0x2F #define DA9063_REG_LDO11_CONT 0x30 -#define DA9063_REG_VIB 0x31 +#define DA9063_REG_SUPPLIES 0x31 #define DA9063_REG_DVC_1 0x32 #define DA9063_REG_DVC_2 0x33 @@ -97,9 +93,9 @@ #define DA9063_REG_ADCIN1_RES 0x3A #define DA9063_REG_ADCIN2_RES 0x3B #define DA9063_REG_ADCIN3_RES 0x3C -#define DA9063_REG_MON1_RES 0x3D -#define DA9063_REG_MON2_RES 0x3E -#define DA9063_REG_MON3_RES 0x3F +#define DA9063_REG_MON_A8_RES 0x3D +#define DA9063_REG_MON_A9_RES 0x3E +#define DA9063_REG_MON_A10_RES 0x3F /* RTC Calendar and Alarm Registers */ #define DA9063_REG_COUNT_S 0x40 @@ -108,15 +104,16 @@ #define DA9063_REG_COUNT_D 0x43 #define DA9063_REG_COUNT_MO 0x44 #define DA9063_REG_COUNT_Y 0x45 -#define DA9063_REG_ALARM_MI 0x46 -#define DA9063_REG_ALARM_H 0x47 -#define DA9063_REG_ALARM_D 0x48 -#define DA9063_REG_ALARM_MO 0x49 -#define DA9063_REG_ALARM_Y 0x4A -#define DA9063_REG_SECOND_A 0x4B -#define DA9063_REG_SECOND_B 0x4C -#define DA9063_REG_SECOND_C 0x4D -#define DA9063_REG_SECOND_D 0x4E +#define DA9063_REG_ALARM_S 0x46 +#define DA9063_REG_ALARM_MI 0x47 +#define DA9063_REG_ALARM_H 0x48 +#define DA9063_REG_ALARM_D 0x49 +#define DA9063_REG_ALARM_MO 0x4A +#define DA9063_REG_ALARM_Y 0x4B +#define DA9063_REG_SECOND_A 0x4C +#define DA9063_REG_SECOND_B 0x4D +#define DA9063_REG_SECOND_C 0x4E +#define DA9063_REG_SECOND_D 0x4F /* Sequencer Control Registers */ #define DA9063_REG_SEQ 0x81 @@ -226,35 +223,37 @@ #define DA9063_REG_CONFIG_J 0x10F #define DA9063_REG_CONFIG_K 0x110 #define DA9063_REG_CONFIG_L 0x111 -#define DA9063_REG_MON_REG_1 0x112 -#define DA9063_REG_MON_REG_2 0x113 -#define DA9063_REG_MON_REG_3 0x114 -#define DA9063_REG_MON_REG_4 0x115 -#define DA9063_REG_MON_REG_5 0x116 -#define DA9063_REG_MON_REG_6 0x117 -#define DA9063_REG_TRIM_CLDR 0x118 - +#define DA9063_REG_CONFIG_M 0x112 +#define DA9063_REG_CONFIG_N 0x113 + +#define DA9063_REG_MON_REG_1 0x114 +#define DA9063_REG_MON_REG_2 0x115 +#define DA9063_REG_MON_REG_3 0x116 +#define DA9063_REG_MON_REG_4 0x117 +#define DA9063_REG_MON_REG_5 0x11E +#define DA9063_REG_MON_REG_6 0x11F +#define DA9063_REG_TRIM_CLDR 0x120 /* General Purpose Registers */ -#define DA9063_REG_GP_ID_0 0x119 -#define DA9063_REG_GP_ID_1 0x11A -#define DA9063_REG_GP_ID_2 0x11B -#define DA9063_REG_GP_ID_3 0x11C -#define DA9063_REG_GP_ID_4 0x11D -#define DA9063_REG_GP_ID_5 0x11E -#define DA9063_REG_GP_ID_6 0x11F -#define DA9063_REG_GP_ID_7 0x120 -#define DA9063_REG_GP_ID_8 0x121 -#define DA9063_REG_GP_ID_9 0x122 -#define DA9063_REG_GP_ID_10 0x123 -#define DA9063_REG_GP_ID_11 0x124 -#define DA9063_REG_GP_ID_12 0x125 -#define DA9063_REG_GP_ID_13 0x126 -#define DA9063_REG_GP_ID_14 0x127 -#define DA9063_REG_GP_ID_15 0x128 -#define DA9063_REG_GP_ID_16 0x129 -#define DA9063_REG_GP_ID_17 0x12A -#define DA9063_REG_GP_ID_18 0x12B -#define DA9063_REG_GP_ID_19 0x12C +#define DA9063_REG_GP_ID_0 0x121 +#define DA9063_REG_GP_ID_1 0x122 +#define DA9063_REG_GP_ID_2 0x123 +#define DA9063_REG_GP_ID_3 0x124 +#define DA9063_REG_GP_ID_4 0x125 +#define DA9063_REG_GP_ID_5 0x126 +#define DA9063_REG_GP_ID_6 0x127 +#define DA9063_REG_GP_ID_7 0x128 +#define DA9063_REG_GP_ID_8 0x129 +#define DA9063_REG_GP_ID_9 0x12A +#define DA9063_REG_GP_ID_10 0x12B +#define DA9063_REG_GP_ID_11 0x12C +#define DA9063_REG_GP_ID_12 0x12D +#define DA9063_REG_GP_ID_13 0x12E +#define DA9063_REG_GP_ID_14 0x12F +#define DA9063_REG_GP_ID_15 0x130 +#define DA9063_REG_GP_ID_16 0x131 +#define DA9063_REG_GP_ID_17 0x132 +#define DA9063_REG_GP_ID_18 0x133 +#define DA9063_REG_GP_ID_19 0x134 /* Chip ID and variant */ #define DA9063_REG_CHIP_ID 0x181 @@ -405,8 +404,10 @@ /* DA9063_REG_CONTROL_B (addr=0x0F) */ #define DA9063_CHG_SEL 0x01 #define DA9063_WATCHDOG_PD 0x02 +#define DA9063_RESET_BLINKING 0x04 #define DA9063_NRES_MODE 0x08 #define DA9063_NONKEY_LOCK 0x10 +#define DA9063_BUCK_SLOWSTART 0x80 /* DA9063_REG_CONTROL_C (addr=0x10) */ #define DA9063_DEBOUNCING_MASK 0x07 @@ -466,6 +467,7 @@ #define DA9063_GPADC_PAUSE 0x02 #define DA9063_PMIF_DIS 0x04 #define DA9063_HS2WIRE_DIS 0x08 +#define DA9063_CLDR_PAUSE 0x10 #define DA9063_BBAT_DIS 0x20 #define DA9063_OUT_32K_PAUSE 0x40 #define DA9063_PMCONT_DIS 0x80 @@ -660,7 +662,7 @@ #define DA9063_GPIO15_TYPE_GPO 0x04 #define DA9063_GPIO15_NO_WAKEUP 0x80 -/* DA9063_REG_GPIO_MODE_0_7 (addr=0x1D) */ +/* DA9063_REG_GPIO_MODE0_7 (addr=0x1D) */ #define DA9063_GPIO0_MODE 0x01 #define DA9063_GPIO1_MODE 0x02 #define DA9063_GPIO2_MODE 0x04 @@ -670,7 +672,7 @@ #define DA9063_GPIO6_MODE 0x40 #define DA9063_GPIO7_MODE 0x80 -/* DA9063_REG_GPIO_MODE_8_15 (addr=0x1E) */ +/* DA9063_REG_GPIO_MODE8_15 (addr=0x1E) */ #define DA9063_GPIO8_MODE 0x01 #define DA9063_GPIO9_MODE 0x02 #define DA9063_GPIO10_MODE 0x04 @@ -702,12 +704,12 @@ #define DA9063_SWITCH_SR_5MV 0x10 #define DA9063_SWITCH_SR_10MV 0x20 #define DA9063_SWITCH_SR_50MV 0x30 -#define DA9063_SWITCH_SR_DIS 0x40 +#define DA9063_CORE_SW_INTERNAL 0x40 #define DA9063_CP_EN_MODE 0x80 /* DA9063_REGL_Bxxxx_CONT common bits (addr=0x20-0x25) */ #define DA9063_BUCK_EN 0x01 -#define DA9063_BUCK_GPI_MASK 0x06 +#define DA9063_BUCK_GPI_MASK 0x06 #define DA9063_BUCK_GPI_OFF 0x00 #define DA9063_BUCK_GPI_GPIO1 0x02 #define DA9063_BUCK_GPI_GPIO2 0x04 @@ -841,25 +843,27 @@ #define DA9063_COUNT_YEAR_MASK 0x3F #define DA9063_MONITOR 0x40 -/* DA9063_REG_ALARM_MI (addr=0x46) */ +/* DA9063_REG_ALARM_S (addr=0x46) */ +#define DA9063_ALARM_S_MASK 0x3F #define DA9063_ALARM_STATUS_ALARM 0x80 #define DA9063_ALARM_STATUS_TICK 0x40 +/* DA9063_REG_ALARM_MI (addr=0x47) */ #define DA9063_ALARM_MIN_MASK 0x3F -/* DA9063_REG_ALARM_H (addr=0x47) */ +/* DA9063_REG_ALARM_H (addr=0x48) */ #define DA9063_ALARM_HOUR_MASK 0x1F -/* DA9063_REG_ALARM_D (addr=0x48) */ +/* DA9063_REG_ALARM_D (addr=0x49) */ #define DA9063_ALARM_DAY_MASK 0x1F -/* DA9063_REG_ALARM_MO (addr=0x49) */ +/* DA9063_REG_ALARM_MO (addr=0x4A) */ #define DA9063_TICK_WAKE 0x20 #define DA9063_TICK_TYPE 0x10 #define DA9063_TICK_TYPE_SEC 0x00 #define DA9063_TICK_TYPE_MIN 0x10 #define DA9063_ALARM_MONTH_MASK 0x0F -/* DA9063_REG_ALARM_Y (addr=0x4A) */ +/* DA9063_REG_ALARM_Y (addr=0x4B) */ #define DA9063_TICK_ON 0x80 #define DA9063_ALARM_ON 0x40 #define DA9063_ALARM_YEAR_MASK 0x3F @@ -906,7 +910,7 @@ /* DA9063_REG_Bxxxx_CFG common bits (addr=0x9D-0xA2) */ #define DA9063_BUCK_FB_MASK 0x07 -#define DA9063_BUCK_PD_DIS_SHIFT 5 +#define DA9063_BUCK_PD_DIS_MASK 0x20 #define DA9063_BUCK_MODE_MASK 0xC0 #define DA9063_BUCK_MODE_MANUAL 0x00 #define DA9063_BUCK_MODE_SLEEP 0x40 -- cgit v1.2.3 From 037b60f2ca9403d02cbee60ad0a10f3806f9dc4b Mon Sep 17 00:00:00 2001 From: Matt Porter Date: Tue, 11 Mar 2014 19:33:54 -0400 Subject: mfd: Add bcm590xx pmu driver Add a driver for the BCM590xx PMU multi-function devices. The driver initially supports regmap initialization and instantiation of the voltage regulator device function of the PMU. Signed-off-by: Matt Porter Reviewed-by: Tim Kryger Reviewed-by: Markus Mayer Signed-off-by: Lee Jones --- include/linux/mfd/bcm590xx.h | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 include/linux/mfd/bcm590xx.h (limited to 'include/linux') diff --git a/include/linux/mfd/bcm590xx.h b/include/linux/mfd/bcm590xx.h new file mode 100644 index 000000000000..434df2d4e587 --- /dev/null +++ b/include/linux/mfd/bcm590xx.h @@ -0,0 +1,31 @@ +/* + * Broadcom BCM590xx PMU + * + * Copyright 2014 Linaro Limited + * Author: Matt Porter + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __LINUX_MFD_BCM590XX_H +#define __LINUX_MFD_BCM590XX_H + +#include +#include +#include + +/* max register address */ +#define BCM590XX_MAX_REGISTER 0xe7 + +struct bcm590xx { + struct device *dev; + struct i2c_client *i2c_client; + struct regmap *regmap; + unsigned int id; +}; + +#endif /* __LINUX_MFD_BCM590XX_H */ -- cgit v1.2.3 From eb71d4dec4a5e010e34b9d7afdb5af41884c388e Mon Sep 17 00:00:00 2001 From: Peter Tyser Date: Mon, 10 Mar 2014 16:34:54 -0500 Subject: mfd: lpc_ich: Add support for iTCO v3 Some newer Atom CPUs, eg Avoton and Bay Trail, use slightly different register layouts for the iTCO than the current v1 and v2 iTCO. Differences from previous iTCO versions include: - The ACPI space is enabled in the "ACPI base address" register instead of the "ACPI control register" - The "no reboot" functionality is set in the "Power Management Configuration" register instead of the "General Control and Status" (GCS) register or PCI configuration space. - The "ACPI Control Register" is not present on v3. The "Power Management Configuration Base Address" register resides at the same address is Avoton/Bay Trail. To differentiate these newer chipsets create a new v3 iTCO version and update the MFD driver to support them. Signed-off-by: Peter Tyser Tested-by: Rajat Jain Reviewed-by: Guenter Roeck Signed-off-by: Lee Jones --- include/linux/mfd/lpc_ich.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/lpc_ich.h b/include/linux/mfd/lpc_ich.h index b2364dd026a6..8feac782fa83 100644 --- a/include/linux/mfd/lpc_ich.h +++ b/include/linux/mfd/lpc_ich.h @@ -21,10 +21,10 @@ #define LPC_ICH_H /* Watchdog resources */ -#define ICH_RES_IO_TCO 0 -#define ICH_RES_IO_SMI 1 -#define ICH_RES_MEM_OFF 2 -#define ICH_RES_MEM_GCS 0 +#define ICH_RES_IO_TCO 0 +#define ICH_RES_IO_SMI 1 +#define ICH_RES_MEM_OFF 2 +#define ICH_RES_MEM_GCS_PMC 0 /* GPIO resources */ #define ICH_RES_GPIO 0 -- cgit v1.2.3