From 04e82ffb0f02e645f3dde5128ef39d425a8b3c6d Mon Sep 17 00:00:00 2001 From: Peter Huewe Date: Wed, 10 Mar 2010 11:55:05 +0900 Subject: serial: sh-sci: Fix build failure for non-sh architectures. This patch fixes a build failure for various arm based defconfigs [1][2][3] and maybe other architectures/configs. The build failure was introduced by the sh specific patch [4] "serial: sh-sci: Add DMA support" by Guennadi Liakhovetski Patch against linux-next of 20100309 References: [1] http://kisskb.ellerman.id.au/kisskb/buildresult/2248992/ [2] http://kisskb.ellerman.id.au/kisskb/buildresult/2248996/ [3] http://kisskb.ellerman.id.au/kisskb/buildresult/2248998/ [4] http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=commit;h=73a19e4c0301908ce6346715fd08a74308451f5a Signed-off-by: Peter Huewe Signed-off-by: Paul Mundt --- include/linux/serial_sci.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index 1b177d29a7f0..193d4bfe42ff 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -2,7 +2,9 @@ #define __LINUX_SERIAL_SCI_H #include +#ifdef CONFIG_SERIAL_SH_SCI_DMA #include +#endif /* * Generic header for SuperH SCI(F) (used by sh/sh64/h8300 and related parts) @@ -30,8 +32,10 @@ struct plat_sci_port { upf_t flags; /* UPF_* flags */ char *clk; /* clock string */ struct device *dma_dev; +#ifdef CONFIG_SERIAL_SH_SCI_DMA enum sh_dmae_slave_chan_id dma_slave_tx; enum sh_dmae_slave_chan_id dma_slave_rx; +#endif }; #endif /* __LINUX_SERIAL_SCI_H */ -- cgit v1.2.3 From 80a05b9ffa7dc13f6693902dd8999a2b61a3a0d7 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 12 Mar 2010 17:34:14 +0100 Subject: clockevents: Sanitize min_delta_ns adjustment and prevent overflows The current logic which handles clock events programming failures can increase min_delta_ns unlimited and even can cause overflows. Sanitize it by: - prevent zero increase when min_delta_ns == 1 - limiting min_delta_ns to a jiffie - bail out if the jiffie limit is hit - add retries stats for /proc/timer_list so we can gather data Reported-by: Uwe Kleine-Koenig Signed-off-by: Thomas Gleixner --- include/linux/clockchips.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/clockchips.h b/include/linux/clockchips.h index 0cf725bdd2a1..fc53492b6ad7 100644 --- a/include/linux/clockchips.h +++ b/include/linux/clockchips.h @@ -73,6 +73,7 @@ enum clock_event_nofitiers { * @list: list head for the management code * @mode: operating mode assigned by the management code * @next_event: local storage for the next event in oneshot mode + * @retries: number of forced programming retries */ struct clock_event_device { const char *name; @@ -93,6 +94,7 @@ struct clock_event_device { struct list_head list; enum clock_event_mode mode; ktime_t next_event; + unsigned long retries; }; /* -- cgit v1.2.3 From e3818b8dce2a934cd1521dbc4827e5238d8f45d8 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Mon, 15 Mar 2010 17:03:43 -0700 Subject: rcu: Make rcu_read_lock_bh_held() allow for disabled BH Disabling BH can stand in for rcu_read_lock_bh(), and this patch updates rcu_read_lock_bh_held() to allow for this. In order to avoid include-file hell, this function is moved out of line to kernel/rcupdate.c. This fixes a false positive RCU warning. Reported-by: Arnd Bergmann Reported-by: Eric Dumazet Signed-off-by: Paul E. McKenney Acked-by: Lai Jiangshan Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <20100316000343.GA25857@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar --- include/linux/rcupdate.h | 19 ++++--------------- 1 file changed, 4 insertions(+), 15 deletions(-) (limited to 'include/linux') diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 3024050c82a1..e1bdc4bfd275 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -123,22 +123,11 @@ static inline int rcu_read_lock_held(void) return lock_is_held(&rcu_lock_map); } -/** - * rcu_read_lock_bh_held - might we be in RCU-bh read-side critical section? - * - * If CONFIG_PROVE_LOCKING is selected and enabled, returns nonzero iff in - * an RCU-bh read-side critical section. In absence of CONFIG_PROVE_LOCKING, - * this assumes we are in an RCU-bh read-side critical section unless it can - * prove otherwise. - * - * Check rcu_scheduler_active to prevent false positives during boot. +/* + * rcu_read_lock_bh_held() is defined out of line to avoid #include-file + * hell. */ -static inline int rcu_read_lock_bh_held(void) -{ - if (!debug_lockdep_rcu_enabled()) - return 1; - return lock_is_held(&rcu_bh_lock_map); -} +extern int rcu_read_lock_bh_held(void); /** * rcu_read_lock_sched_held - might we be in RCU-sched read-side critical section? -- cgit v1.2.3 From 7f5b774275df8c76a959eae7488128b637fcbfc8 Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Tue, 16 Mar 2010 17:00:29 +0800 Subject: rcu: Fix tracepoints & lockdep false positive tracepoint.h uses rcu_dereference(), which triggers this warning: [ 0.701161] =================================================== [ 0.702211] [ INFO: suspicious rcu_dereference_check() usage. ] [ 0.702716] --------------------------------------------------- [ 0.703203] include/trace/events/workqueue.h:68 invoked rcu_dereference_check() without protection! [ 0.703971] [ 0.703990] other info that might help us debug this: [ 0.703993] [ 0.705590] [ 0.705604] rcu_scheduler_active = 1, debug_locks = 0 [ 0.706712] 1 lock held by swapper/1: [ 0.707229] #0: (cpu_add_remove_lock){+.+.+.}, at: [] cpu_maps_update_begin+0x14/0x20 [ 0.710097] [ 0.710106] stack backtrace: [ 0.712602] Pid: 1, comm: swapper Not tainted 2.6.34-rc1-tip-01613-g72662bb #168 [ 0.713231] Call Trace: [ 0.713997] [] lockdep_rcu_dereference+0x9d/0xb0 [ 0.714746] [] create_workqueue_thread+0x107/0x110 [ 0.715353] [] ? worker_thread+0x0/0x340 [ 0.715845] [] __create_workqueue_key+0x138/0x240 [ 0.716427] [] ? cpu_maps_update_done+0x12/0x20 [ 0.717012] [] init_workqueues+0x6f/0x80 [ 0.717530] [] kernel_init+0x102/0x1f0 [ 0.717570] [] ? kernel_init+0x0/0x1f0 [ 0.718944] [] kernel_thread_helper+0x6/0x10 Signed-off-by: Lai Jiangshan Cc: Paul E. McKenney Cc: Mathieu Desnoyers Cc: Steven Rostedt Cc: Frederic Weisbecker LKML-Reference: <4B9F48AD.4000404@cn.fujitsu.com> Signed-off-by: Ingo Molnar --- include/linux/tracepoint.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h index f59604ed0ec6..78b4bd3be496 100644 --- a/include/linux/tracepoint.h +++ b/include/linux/tracepoint.h @@ -49,7 +49,7 @@ struct tracepoint { void **it_func; \ \ rcu_read_lock_sched_notrace(); \ - it_func = rcu_dereference((tp)->funcs); \ + it_func = rcu_dereference_sched((tp)->funcs); \ if (it_func) { \ do { \ ((void(*)(proto))(*it_func))(args); \ -- cgit v1.2.3 From 0cff810f54b3b52075c27f7a7021d5b195264b6c Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Thu, 18 Mar 2010 12:25:33 -0700 Subject: rcu: Fix local_irq_disable() CONFIG_PROVE_RCU=y false positives It is documented that local_irq_disable() also delimits RCU_SCHED read-site critical sections. See the document of synchronize_sched() or Documentation/RCU/whatisRCU.txt. So we have to test irqs_disabled() in rcu_read_lock_sched_held(). Otherwise rcu-lockdep brings incorrect complaint. Signed-off-by: Lai Jiangshan Signed-off-by: Paul E. McKenney Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com Cc: eric.dumazet@gmail.com LKML-Reference: <1268940334-10892-1-git-send-email-paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar --- include/linux/rcupdate.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index e1bdc4bfd275..872a98e13d6a 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -149,7 +149,7 @@ static inline int rcu_read_lock_sched_held(void) return 1; if (debug_locks) lockdep_opinion = lock_is_held(&rcu_sched_lock_map); - return lockdep_opinion || preempt_count() != 0; + return lockdep_opinion || preempt_count() != 0 || irqs_disabled(); } #else /* #ifdef CONFIG_PREEMPT */ static inline int rcu_read_lock_sched_held(void) @@ -180,7 +180,7 @@ static inline int rcu_read_lock_bh_held(void) #ifdef CONFIG_PREEMPT static inline int rcu_read_lock_sched_held(void) { - return !rcu_scheduler_active || preempt_count() != 0; + return !rcu_scheduler_active || preempt_count() != 0 || irqs_disabled(); } #else /* #ifdef CONFIG_PREEMPT */ static inline int rcu_read_lock_sched_held(void) -- cgit v1.2.3 From 0641e4fbf2f824faee00ea74c459a088d94905fd Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 18 Mar 2010 21:16:45 -0700 Subject: net: Potential null skb->dev dereference When doing "ifenslave -d bond0 eth0", there is chance to get NULL dereference in netif_receive_skb(), because dev->master suddenly becomes NULL after we tested it. We should use ACCESS_ONCE() to avoid this (or rcu_dereference()) Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/netdevice.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index c79a88be7c33..fa8b47637997 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2059,12 +2059,12 @@ static inline void skb_bond_set_mac_by_master(struct sk_buff *skb, * duplicates except for 802.3ad ETH_P_SLOW, alb non-mcast/bcast, and * ARP on active-backup slaves with arp_validate enabled. */ -static inline int skb_bond_should_drop(struct sk_buff *skb) +static inline int skb_bond_should_drop(struct sk_buff *skb, + struct net_device *master) { - struct net_device *dev = skb->dev; - struct net_device *master = dev->master; - if (master) { + struct net_device *dev = skb->dev; + if (master->priv_flags & IFF_MASTER_ARPMON) dev->last_rx = jiffies; -- cgit v1.2.3 From 87a6aca504d65f242589583e04df5e74b5eae1fe Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 15 Mar 2010 17:14:15 -0700 Subject: Revert "tty: Add a new VT mode which is like VT_PROCESS but doesn't require a VT_RELDISP ioctl call" This reverts commit eec9fe7d1ab4a0dfac4cb43047a7657fffd0002f. Ari writes as the reason this should be reverted: The problems with this patch include: 1. There's at least one subtlety I overlooked - switching between X servers (i.e. from one X VT to another) still requires the cooperation of both X servers. I was assuming that KMS eliminated this. 2. It hasn't been tested at all (no X server patch exists which uses the new mode). As he was the original author of the patch, I'll revert it. Cc: Ari Entlich Cc: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/vt.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/vt.h b/include/linux/vt.h index 778b7b2a47d4..d5dd0bc408fd 100644 --- a/include/linux/vt.h +++ b/include/linux/vt.h @@ -27,7 +27,7 @@ struct vt_mode { #define VT_SETMODE 0x5602 /* set mode of active vt */ #define VT_AUTO 0x00 /* auto vt switching */ #define VT_PROCESS 0x01 /* process controls switching */ -#define VT_PROCESS_AUTO 0x02 /* process is notified of switching */ +#define VT_ACKACQ 0x02 /* acknowledge switch */ struct vt_stat { unsigned short v_active; /* active vt */ @@ -38,7 +38,6 @@ struct vt_stat { #define VT_SENDSIG 0x5604 /* signal to send to bitmask of vts */ #define VT_RELDISP 0x5605 /* release display */ -#define VT_ACKACQ 0x02 /* acknowledge switch */ #define VT_ACTIVATE 0x5606 /* make vt active */ #define VT_WAITACTIVE 0x5607 /* wait for vt active */ -- cgit v1.2.3 From 352fa6ad16b89f8ffd1a93b4419b1a8f2259feab Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Tue, 2 Mar 2010 22:24:19 +0000 Subject: tty: Take a 256 byte padding into account when buffering below sub-page units The TTY layer takes some care to ensure that only sub-page allocations are made with interrupts disabled. It does this by setting a goal of "TTY_BUFFER_PAGE" to allocate. Unfortunately, while TTY_BUFFER_PAGE takes the size of tty_buffer into account, it fails to account that tty_buffer_find() rounds the buffer size out to the next 256 byte boundary before adding on the size of the tty_buffer. This patch adjusts the TTY_BUFFER_PAGE calculation to take into account the size of the tty_buffer and the padding. Once applied, tty_buffer_alloc() should not require high-order allocations. Signed-off-by: Mel Gorman Cc: stable Signed-off-by: Greg Kroah-Hartman --- include/linux/tty.h | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/tty.h b/include/linux/tty.h index 568369a86306..593228a520e1 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -70,12 +70,13 @@ struct tty_buffer { /* * We default to dicing tty buffer allocations to this many characters - * in order to avoid multiple page allocations. We assume tty_buffer itself - * is under 256 bytes. See tty_buffer_find for the allocation logic this - * must match + * in order to avoid multiple page allocations. We know the size of + * tty_buffer itself but it must also be taken into account that the + * the buffer is 256 byte aligned. See tty_buffer_find for the allocation + * logic this must match */ -#define TTY_BUFFER_PAGE ((PAGE_SIZE - 256) / 2) +#define TTY_BUFFER_PAGE (((PAGE_SIZE - sizeof(struct tty_buffer)) / 2) & ~0xFF) struct tty_bufhead { -- cgit v1.2.3 From 336cee42dd52824e360ab419eab4e8888eb054ec Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Mon, 8 Mar 2010 21:50:11 -0600 Subject: tty_port,usb-console: Fix usb serial console open/close regression Commit e1108a63e10d344284011cccc06328b2cd3e5da3 ("usb_serial: Use the shutdown() operation") breaks the ability to use a usb console starting in 2.6.33. This was observed when using console=ttyUSB0,115200 as a boot argument with an FTDI device. The error is: ftdi_sio ttyUSB0: ftdi_submit_read_urb - failed submitting read urb, error -22 The handling of the ASYNCB_INITIALIZED changed in 2.6.32 such that in tty_port_shutdown() it always clears the flag if it is set. The fix is to add a variable to the tty_port struct to indicate when the tty port is a console. CC: Alan Cox CC: Alan Stern CC: Oliver Neukum CC: Andrew Morton Signed-off-by: Jason Wessel Signed-off-by: Greg Kroah-Hartman --- include/linux/tty.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/tty.h b/include/linux/tty.h index 593228a520e1..4409967db0c4 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -224,6 +224,7 @@ struct tty_port { wait_queue_head_t close_wait; /* Close waiters */ wait_queue_head_t delta_msr_wait; /* Modem status change */ unsigned long flags; /* TTY flags ASY_*/ + unsigned char console:1; /* port is a console */ struct mutex mutex; /* Locking */ struct mutex buf_mutex; /* Buffer alloc lock */ unsigned char *xmit_buf; /* Optional buffer */ -- cgit v1.2.3 From f09a15e6e69884cedec4d1c022089a973aa01f1e Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Tue, 16 Mar 2010 12:55:44 -0700 Subject: USB: Fix usb_fill_int_urb for SuperSpeed devices USB 3 and Wireless USB specify a logarithmic encoding of the endpoint interval that matches the USB 2 specification. usb_fill_int_urb() didn't know that and was filling in the interval as if it was USB 1.1. Fix usb_fill_int_urb() for SuperSpeed devices, but leave the wireless case alone, because David Vrabel wants to keep the old encoding. Update the struct urb kernel doc to note that SuperSpeed URBs must have urb->interval specified in microframes. Add a missing break statement in the usb_submit_urb() interrupt URB checking, since wireless USB and SuperSpeed USB encode urb->interval differently. This allows xHCI roothubs to actually register with khubd. Signed-off-by: Matthew Wilcox Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- include/linux/usb.h | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb.h b/include/linux/usb.h index 8c9f053111bb..ce1323c4e47c 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -1055,7 +1055,8 @@ typedef void (*usb_complete_t)(struct urb *); * @number_of_packets: Lists the number of ISO transfer buffers. * @interval: Specifies the polling interval for interrupt or isochronous * transfers. The units are frames (milliseconds) for full and low - * speed devices, and microframes (1/8 millisecond) for highspeed ones. + * speed devices, and microframes (1/8 millisecond) for highspeed + * and SuperSpeed devices. * @error_count: Returns the number of ISO transfers that reported errors. * @context: For use in completion functions. This normally points to * request-specific driver context. @@ -1286,9 +1287,16 @@ static inline void usb_fill_bulk_urb(struct urb *urb, * * Initializes a interrupt urb with the proper information needed to submit * it to a device. - * Note that high speed interrupt endpoints use a logarithmic encoding of - * the endpoint interval, and express polling intervals in microframes - * (eight per millisecond) rather than in frames (one per millisecond). + * + * Note that High Speed and SuperSpeed interrupt endpoints use a logarithmic + * encoding of the endpoint interval, and express polling intervals in + * microframes (eight per millisecond) rather than in frames (one per + * millisecond). + * + * Wireless USB also uses the logarithmic encoding, but specifies it in units of + * 128us instead of 125us. For Wireless USB devices, the interval is passed + * through to the host controller, rather than being translated into microframe + * units. */ static inline void usb_fill_int_urb(struct urb *urb, struct usb_device *dev, @@ -1305,7 +1313,7 @@ static inline void usb_fill_int_urb(struct urb *urb, urb->transfer_buffer_length = buffer_length; urb->complete = complete_fn; urb->context = context; - if (dev->speed == USB_SPEED_HIGH) + if (dev->speed == USB_SPEED_HIGH || dev->speed == USB_SPEED_SUPER) urb->interval = 1 << (interval - 1); else urb->interval = interval; -- cgit v1.2.3 From 1a50307ba1826e4da0024e64b245ce4eadf7688a Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Thu, 18 Mar 2010 14:24:42 +0000 Subject: netlink: fix NETLINK_RECV_NO_ENOBUFS in netlink_set_err() Currently, ENOBUFS errors are reported to the socket via netlink_set_err() even if NETLINK_RECV_NO_ENOBUFS is set. However, that should not happen. This fixes this problem and it changes the prototype of netlink_set_err() to return the number of sockets that have set the NETLINK_RECV_NO_ENOBUFS socket option. This return value is used in the next patch in these bugfix series. Signed-off-by: Pablo Neira Ayuso Signed-off-by: David S. Miller --- include/linux/netlink.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/netlink.h b/include/linux/netlink.h index fde27c017326..6eaca5e1e8ca 100644 --- a/include/linux/netlink.h +++ b/include/linux/netlink.h @@ -188,7 +188,7 @@ extern int netlink_has_listeners(struct sock *sk, unsigned int group); extern int netlink_unicast(struct sock *ssk, struct sk_buff *skb, __u32 pid, int nonblock); extern int netlink_broadcast(struct sock *ssk, struct sk_buff *skb, __u32 pid, __u32 group, gfp_t allocation); -extern void netlink_set_err(struct sock *ssk, __u32 pid, __u32 group, int code); +extern int netlink_set_err(struct sock *ssk, __u32 pid, __u32 group, int code); extern int netlink_register_notifier(struct notifier_block *nb); extern int netlink_unregister_notifier(struct notifier_block *nb); -- cgit v1.2.3 From 37b7ef7203240b3aba577bb1ff6765fe15225976 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 16 Mar 2010 13:30:21 +0000 Subject: netfilter: ctnetlink: fix reliable event delivery if message building fails This patch fixes a bug that allows to lose events when reliable event delivery mode is used, ie. if NETLINK_BROADCAST_SEND_ERROR and NETLINK_RECV_NO_ENOBUFS socket options are set. Signed-off-by: Pablo Neira Ayuso Signed-off-by: David S. Miller --- include/linux/netfilter/nfnetlink.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/netfilter/nfnetlink.h b/include/linux/netfilter/nfnetlink.h index 53923868c9bd..361d6b5630ee 100644 --- a/include/linux/netfilter/nfnetlink.h +++ b/include/linux/netfilter/nfnetlink.h @@ -76,7 +76,7 @@ extern int nfnetlink_subsys_unregister(const struct nfnetlink_subsystem *n); extern int nfnetlink_has_listeners(struct net *net, unsigned int group); extern int nfnetlink_send(struct sk_buff *skb, struct net *net, u32 pid, unsigned group, int echo, gfp_t flags); -extern void nfnetlink_set_err(struct net *net, u32 pid, u32 group, int error); +extern int nfnetlink_set_err(struct net *net, u32 pid, u32 group, int error); extern int nfnetlink_unicast(struct sk_buff *skb, struct net *net, u_int32_t pid, int flags); extern void nfnl_lock(void); -- cgit v1.2.3 From 9bf35c8dddd56f7f247a27346f74f5adc18071f4 Mon Sep 17 00:00:00 2001 From: Paulius Zaleckas Date: Sun, 21 Mar 2010 21:19:02 -0700 Subject: if_tunnel.h: add missing ams/byteorder.h include When compiling userspace application which includes if_tunnel.h and uses GRE_* defines you will get undefined reference to __cpu_to_be16. Fix this by adding missing #include Cc: stable@kernel.org Signed-off-by: Paulius Zaleckas Signed-off-by: David S. Miller --- include/linux/if_tunnel.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/if_tunnel.h b/include/linux/if_tunnel.h index 1822d635be6b..16b92d008bed 100644 --- a/include/linux/if_tunnel.h +++ b/include/linux/if_tunnel.h @@ -2,6 +2,7 @@ #define _IF_TUNNEL_H_ #include +#include #ifdef __KERNEL__ #include -- cgit v1.2.3 From c9acb42ef1904d15d0fb315061cefbe638f67f3a Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 19 Mar 2010 15:36:22 -0400 Subject: SUNRPC: Fix a use after free bug with the NFSv4.1 backchannel The ->release_request() callback was designed to allow the transport layer to do housekeeping after the RPC call is done. It cannot be used to free the request itself, and doing so leads to a use-after-free bug in xprt_release(). Signed-off-by: Trond Myklebust --- include/linux/sunrpc/bc_xprt.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/bc_xprt.h b/include/linux/sunrpc/bc_xprt.h index d7152b451e21..7c91260c44a9 100644 --- a/include/linux/sunrpc/bc_xprt.h +++ b/include/linux/sunrpc/bc_xprt.h @@ -36,7 +36,6 @@ struct rpc_rqst *xprt_alloc_bc_request(struct rpc_xprt *xprt); void xprt_free_bc_request(struct rpc_rqst *req); int xprt_setup_backchannel(struct rpc_xprt *, unsigned int min_reqs); void xprt_destroy_backchannel(struct rpc_xprt *, int max_reqs); -void bc_release_request(struct rpc_task *); int bc_send(struct rpc_rqst *req); /* @@ -59,6 +58,10 @@ static inline int svc_is_backchannel(const struct svc_rqst *rqstp) { return 0; } + +static inline void xprt_free_bc_request(struct rpc_rqst *req) +{ +} #endif /* CONFIG_NFS_V4_1 */ #endif /* _LINUX_SUNRPC_BC_XPRT_H */ -- cgit v1.2.3 From ae6be51ed01d6c4aaf249a207b4434bc7785853b Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 22 Mar 2010 13:12:33 -0700 Subject: Fix up prototype for sys_ipc breakage Commit 45575f5a426c ("ppc64 sys_ipc breakage in 2.6.34-rc2") fixed the definition of the sys_ipc() helper, but didn't fix the prototype in Reported-and-tested-by: Andreas Schwab Signed-off-by: Linus Torvalds --- include/linux/syscalls.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index f994ae58a002..057929b0a651 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -688,7 +688,7 @@ asmlinkage long sys_shmat(int shmid, char __user *shmaddr, int shmflg); asmlinkage long sys_shmget(key_t key, size_t size, int flag); asmlinkage long sys_shmdt(char __user *shmaddr); asmlinkage long sys_shmctl(int shmid, int cmd, struct shmid_ds __user *buf); -asmlinkage long sys_ipc(unsigned int call, int first, int second, +asmlinkage long sys_ipc(unsigned int call, int first, unsigned long second, unsigned long third, void __user *ptr, long fifth); asmlinkage long sys_mq_open(const char __user *name, int oflag, mode_t mode, struct mq_attr __user *attr); -- cgit v1.2.3 From 66f1207bce10fd80ee8ce99b67d617644612f05e Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 11 Mar 2010 17:01:09 -0700 Subject: resources: add interfaces that return conflict information request_resource() and insert_resource() only return success or failure, which no information about what existing resource conflicted with the proposed new reservation. This patch adds request_resource_conflict() and insert_resource_conflict(), which return the conflicting resource. Callers may use this for better error messages or to adjust the new resource and retry the request. Signed-off-by: Bjorn Helgaas Signed-off-by: Jesse Barnes --- include/linux/ioport.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ioport.h b/include/linux/ioport.h index 71ab79da7e7f..26fad187d661 100644 --- a/include/linux/ioport.h +++ b/include/linux/ioport.h @@ -112,12 +112,14 @@ struct resource_list { extern struct resource ioport_resource; extern struct resource iomem_resource; +extern struct resource *request_resource_conflict(struct resource *root, struct resource *new); extern int request_resource(struct resource *root, struct resource *new); extern int release_resource(struct resource *new); void release_child_resources(struct resource *new); extern void reserve_region_with_split(struct resource *root, resource_size_t start, resource_size_t end, const char *name); +extern struct resource *insert_resource_conflict(struct resource *parent, struct resource *new); extern int insert_resource(struct resource *parent, struct resource *new); extern void insert_resource_expand_to_fit(struct resource *root, struct resource *new); extern int allocate_resource(struct resource *root, struct resource *new, -- cgit v1.2.3 From 03e6d819c2cb2cc8ce5642669a0a7c72336ee7a2 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Tue, 23 Mar 2010 20:40:50 +0000 Subject: skbuff: remove unused dma_head & dma_maps fields The dma map fields in the skb_shared_info structure no longer has any users and can be dropped since it is making the skb_shared_info unecessarily larger. Running slabtop show that we were using 4K slabs for the skb->head on x86_64 w/ an allocation size of 1522. It turns out that the dma_head and dma_maps array made skb_shared large enough that we had crossed over the 2k boundary with standard frames and as such we were using 4k blocks of memory for all skbs. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/skbuff.h | 6 ------ 1 file changed, 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 03f816a9b659..124f90cd5a38 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -190,9 +190,6 @@ struct skb_shared_info { atomic_t dataref; unsigned short nr_frags; unsigned short gso_size; -#ifdef CONFIG_HAS_DMA - dma_addr_t dma_head; -#endif /* Warning: this field is not always filled in (UFO)! */ unsigned short gso_segs; unsigned short gso_type; @@ -201,9 +198,6 @@ struct skb_shared_info { struct sk_buff *frag_list; struct skb_shared_hwtstamps hwtstamps; skb_frag_t frags[MAX_SKB_FRAGS]; -#ifdef CONFIG_HAS_DMA - dma_addr_t dma_maps[MAX_SKB_FRAGS]; -#endif /* Intermediate layers must ensure that destructor_arg * remains valid until skb destructor */ void * destructor_arg; -- cgit v1.2.3 From 4c87684d32e8f95715d53039dcd2d998dc63d1eb Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?David=20H=C3=A4rdeman?= Date: Tue, 23 Mar 2010 13:35:22 -0700 Subject: kfifo: fix KFIFO_INIT in include/linux/kfifo.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit include/linux/kfifo.h first defines and then undefines __kfifo_initializer which is used by INIT_KFIFO (which is also a macro, so building a module which uses INIT_KFIFO will fail). Signed-off-by: David Härdeman Acked-by: Stefani Seibold Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kfifo.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h index bc0fc795bd35..ece0b1c33816 100644 --- a/include/linux/kfifo.h +++ b/include/linux/kfifo.h @@ -102,8 +102,6 @@ union { \ unsigned char name##kfifo_buffer[size]; \ struct kfifo name = __kfifo_initializer(size, name##kfifo_buffer) -#undef __kfifo_initializer - extern void kfifo_init(struct kfifo *fifo, void *buffer, unsigned int size); extern __must_check int kfifo_alloc(struct kfifo *fifo, unsigned int size, -- cgit v1.2.3 From 6cb4aff0a77cc0e6bae9475d62205319e3ebbf3f Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Tue, 23 Mar 2010 13:35:38 -0700 Subject: reiserfs: fix oops while creating privroot with selinux enabled Commit 57fe60df ("reiserfs: add atomic addition of selinux attributes during inode creation") contains a bug that will cause it to oops when mounting a file system that didn't previously contain extended attributes on a system using security.* xattrs. The issue is that while creating the privroot during mount reiserfs_security_init calls reiserfs_xattr_jcreate_nblocks which dereferences the xattr root. The xattr root doesn't exist, so we get an oops. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=15309 Signed-off-by: Jeff Mahoney Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/reiserfs_xattr.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/reiserfs_xattr.h b/include/linux/reiserfs_xattr.h index 99928dce37ea..7fa02b4af838 100644 --- a/include/linux/reiserfs_xattr.h +++ b/include/linux/reiserfs_xattr.h @@ -70,6 +70,11 @@ int reiserfs_security_write(struct reiserfs_transaction_handle *th, void reiserfs_security_free(struct reiserfs_security_handle *sec); #endif +static inline int reiserfs_xattrs_initialized(struct super_block *sb) +{ + return REISERFS_SB(sb)->priv_root != NULL; +} + #define xattr_size(size) ((size) + sizeof(struct reiserfs_xattr_header)) static inline loff_t reiserfs_xattr_nblocks(struct inode *inode, loff_t size) { -- cgit v1.2.3 From 7198f3c9b13c7aa1e5d9f7ff74c0ea303174feff Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Tue, 23 Mar 2010 13:35:40 -0700 Subject: mmc: fix incorrect interpretation of card type bits In the extended CSD register the CARD_TYPE is an 8-bit value of which the upper 6 bits were reserved in JEDEC specifications prior to version 4.4. In version 4.4 two of the reserved bits were designated for identifying support for the newly added High-Speed Dual Data Rate. Unfortunately the mmc_read_ext_csd() function required that the reserved bits be zero instead of ignoring them as it should. This patch makes mmc_read_ext_csd() ignore the CARD_TYPE bits that are reserved or not yet supported. It also stops the function jumping to the end as though an error occurred, when it is only warns that the CARD_TYPE bits (that it does interpret) are invalid. Signed-off-by: Adrian Hunter Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmc/mmc.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index c02c8db73701..8a49cbf0376d 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -268,6 +268,7 @@ struct _mmc_csd { #define EXT_CSD_CARD_TYPE_26 (1<<0) /* Card can run at 26MHz */ #define EXT_CSD_CARD_TYPE_52 (1<<1) /* Card can run at 52MHz */ +#define EXT_CSD_CARD_TYPE_MASK 0x3 /* Mask out reserved and DDR bits */ #define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ -- cgit v1.2.3 From 90fddabf5818367c6bd1fe1b256a10e01827862f Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 24 Mar 2010 09:43:00 +0000 Subject: Document Linux's circular buffering capabilities Document the circular buffering capabilities available in Linux. Signed-off-by: David Howells Signed-off-by: Paul E. McKenney Reviewed-by: Randy Dunlap Reviewed-by: Stefan Richter Signed-off-by: Linus Torvalds --- include/linux/circ_buf.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/circ_buf.h b/include/linux/circ_buf.h index a2ed0591fb19..90f2471dc6f2 100644 --- a/include/linux/circ_buf.h +++ b/include/linux/circ_buf.h @@ -1,3 +1,7 @@ +/* + * See Documentation/circular-buffers.txt for more information. + */ + #ifndef _LINUX_CIRC_BUF_H #define _LINUX_CIRC_BUF_H 1 -- cgit v1.2.3 From 9c13886665c43600bd0af4b38e33c654e648e078 Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Thu, 25 Mar 2010 11:17:26 +0100 Subject: netfilter: ip6table_raw: fix table priority The order of the IPv6 raw table is currently reversed, that makes impossible to use the NOTRACK target in IPv6: for example if someone enters ip6tables -t raw -A PREROUTING -p tcp --dport 80 -j NOTRACK and if we receive fragmented packets then the first fragment will be untracked and thus skip nf_ct_frag6_gather (and conntrack), while all subsequent fragments enter nf_ct_frag6_gather and reassembly will never successfully be finished. Singed-off-by: Jozsef Kadlecsik Signed-off-by: Patrick McHardy --- include/linux/netfilter_ipv6.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/netfilter_ipv6.h b/include/linux/netfilter_ipv6.h index d654873aa25a..1f7e300094cd 100644 --- a/include/linux/netfilter_ipv6.h +++ b/include/linux/netfilter_ipv6.h @@ -59,6 +59,7 @@ enum nf_ip6_hook_priorities { NF_IP6_PRI_FIRST = INT_MIN, NF_IP6_PRI_CONNTRACK_DEFRAG = -400, + NF_IP6_PRI_RAW = -300, NF_IP6_PRI_SELINUX_FIRST = -225, NF_IP6_PRI_CONNTRACK = -200, NF_IP6_PRI_MANGLE = -150, -- cgit v1.2.3 From 5a7aadfe2fcb0f69e2acc1fbefe22a096e792fc9 Mon Sep 17 00:00:00 2001 From: Matt Helsley Date: Fri, 26 Mar 2010 23:51:44 +0100 Subject: Freezer: Fix buggy resume test for tasks frozen with cgroup freezer When the cgroup freezer is used to freeze tasks we do not want to thaw those tasks during resume. Currently we test the cgroup freezer state of the resuming tasks to see if the cgroup is FROZEN. If so then we don't thaw the task. However, the FREEZING state also indicates that the task should remain frozen. This also avoids a problem pointed out by Oren Ladaan: the freezer state transition from FREEZING to FROZEN is updated lazily when userspace reads or writes the freezer.state file in the cgroup filesystem. This means that resume will thaw tasks in cgroups which should be in the FROZEN state if there is no read/write of the freezer.state file to trigger this transition before suspend. NOTE: Another "simple" solution would be to always update the cgroup freezer state during resume. However it's a bad choice for several reasons: Updating the cgroup freezer state is somewhat expensive because it requires walking all the tasks in the cgroup and checking if they are each frozen. Worse, this could easily make resume run in N^2 time where N is the number of tasks in the cgroup. Finally, updating the freezer state from this code path requires trickier locking because of the way locks must be ordered. Instead of updating the freezer state we rely on the fact that lazy updates only manage the transition from FREEZING to FROZEN. We know that a cgroup with the FREEZING state may actually be FROZEN so test for that state too. This makes sense in the resume path even for partially-frozen cgroups -- those that really are FREEZING but not FROZEN. Reported-by: Oren Ladaan Signed-off-by: Matt Helsley Cc: stable@kernel.org Signed-off-by: Rafael J. Wysocki --- include/linux/freezer.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/freezer.h b/include/linux/freezer.h index 5a361f85cfec..da7e52b099f3 100644 --- a/include/linux/freezer.h +++ b/include/linux/freezer.h @@ -64,9 +64,12 @@ extern bool freeze_task(struct task_struct *p, bool sig_only); extern void cancel_freezing(struct task_struct *p); #ifdef CONFIG_CGROUP_FREEZER -extern int cgroup_frozen(struct task_struct *task); +extern int cgroup_freezing_or_frozen(struct task_struct *task); #else /* !CONFIG_CGROUP_FREEZER */ -static inline int cgroup_frozen(struct task_struct *task) { return 0; } +static inline int cgroup_freezing_or_frozen(struct task_struct *task) +{ + return 0; +} #endif /* !CONFIG_CGROUP_FREEZER */ /* -- cgit v1.2.3 From 71c5c1595c04852d6fbf3c4882b47b30b61a4d32 Mon Sep 17 00:00:00 2001 From: Brandon L Black Date: Fri, 26 Mar 2010 16:18:03 +0000 Subject: net: Add MSG_WAITFORONE flag to recvmmsg Add new flag MSG_WAITFORONE for the recvmmsg() syscall. When this flag is specified for a blocking socket, recvmmsg() will only block until at least 1 packet is available. The default behavior is to block until all vlen packets are available. This flag has no effect on non-blocking sockets or when used in combination with MSG_DONTWAIT. Signed-off-by: Brandon L Black Acked-by: Ulrich Drepper Acked-by: Eric Dumazet Acked-by: Arnaldo Carvalho de Melo Signed-off-by: David S. Miller --- include/linux/socket.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/socket.h b/include/linux/socket.h index 7b3aae2052a6..354cc5617f8b 100644 --- a/include/linux/socket.h +++ b/include/linux/socket.h @@ -255,6 +255,7 @@ struct ucred { #define MSG_ERRQUEUE 0x2000 /* Fetch message from error queue */ #define MSG_NOSIGNAL 0x4000 /* Do not generate SIGPIPE */ #define MSG_MORE 0x8000 /* Sender will send more */ +#define MSG_WAITFORONE 0x10000 /* recvmmsg(): block until 1+ packets avail */ #define MSG_EOF MSG_FIN -- cgit v1.2.3 From 259354deaaf03d49a02dbb9975d6ec2a54675672 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 10 Mar 2010 18:56:10 +0900 Subject: module: encapsulate percpu handling better and record percpu_size Better encapsulate module static percpu area handling so that code outsidef of CONFIG_SMP ifdef doesn't deal with mod->percpu directly and add mod->percpu_size and record percpu_size in it. Both percpu fields are compiled out on UP. While at it, mark mod->percpu w/ __percpu. This is to prepare for is_module_percpu_address(). Signed-off-by: Tejun Heo Acked-by: Rusty Russell --- include/linux/module.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/module.h b/include/linux/module.h index 5e869ffd34aa..87d247ac6761 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -330,8 +330,11 @@ struct module struct module_notes_attrs *notes_attrs; #endif +#ifdef CONFIG_SMP /* Per-cpu data. */ - void *percpu; + void __percpu *percpu; + unsigned int percpu_size; +#endif /* The command line arguments (may be mangled). People like keeping pointers to this stuff */ -- cgit v1.2.3 From 10fad5e46f6c7bdfb01b1a012380a38e3c6ab346 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 10 Mar 2010 18:57:54 +0900 Subject: percpu, module: implement and use is_kernel/module_percpu_address() lockdep has custom code to check whether a pointer belongs to static percpu area which is somewhat broken. Implement proper is_kernel/module_percpu_address() and replace the custom code. On UP, percpu variables are regular static variables and can't be distinguished from them. Always return %false on UP. Signed-off-by: Tejun Heo Acked-by: Peter Zijlstra Cc: Rusty Russell Cc: Ingo Molnar --- include/linux/module.h | 1 + include/linux/percpu.h | 7 +++++++ 2 files changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/module.h b/include/linux/module.h index 87d247ac6761..f0e2659f4e3e 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -395,6 +395,7 @@ static inline int module_is_live(struct module *mod) struct module *__module_text_address(unsigned long addr); struct module *__module_address(unsigned long addr); bool is_module_address(unsigned long addr); +bool is_module_percpu_address(unsigned long addr); bool is_module_text_address(unsigned long addr); static inline int within_module_core(unsigned long addr, struct module *mod) diff --git a/include/linux/percpu.h b/include/linux/percpu.h index a93e5bfdccb8..11d5f834b54a 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -137,6 +137,7 @@ extern int __init pcpu_page_first_chunk(size_t reserved_size, extern void __percpu *__alloc_reserved_percpu(size_t size, size_t align); extern void __percpu *__alloc_percpu(size_t size, size_t align); extern void free_percpu(void __percpu *__pdata); +extern bool is_kernel_percpu_address(unsigned long addr); extern phys_addr_t per_cpu_ptr_to_phys(void *addr); #ifndef CONFIG_HAVE_SETUP_PER_CPU_AREA @@ -163,6 +164,12 @@ static inline void free_percpu(void __percpu *p) kfree(p); } +/* can't distinguish from other static vars, always false */ +static inline bool is_kernel_percpu_address(unsigned long addr) +{ + return false; +} + static inline phys_addr_t per_cpu_ptr_to_phys(void *addr) { return __pa(addr); -- cgit v1.2.3 From a53f4f9efaeb1d87cfae066346979d4d70e1abe9 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 29 Mar 2010 13:08:52 +0100 Subject: SLOW_WORK: CONFIG_SLOW_WORK_PROC should be CONFIG_SLOW_WORK_DEBUG CONFIG_SLOW_WORK_PROC was changed to CONFIG_SLOW_WORK_DEBUG, but not in all instances. Change the remaining instances. This makes the debugfs file display the time mark and the owner's description again. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- include/linux/fscache-cache.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/fscache-cache.h b/include/linux/fscache-cache.h index 7be0c6fbe880..c57db27ac861 100644 --- a/include/linux/fscache-cache.h +++ b/include/linux/fscache-cache.h @@ -105,7 +105,7 @@ struct fscache_operation { /* operation releaser */ fscache_operation_release_t release; -#ifdef CONFIG_SLOW_WORK_PROC +#ifdef CONFIG_SLOW_WORK_DEBUG const char *name; /* operation name */ const char *state; /* operation state */ #define fscache_set_op_name(OP, N) do { (OP)->name = (N); } while(0) -- cgit v1.2.3 From c36207a4624f15020f2918324405c1c88a5d4cbc Mon Sep 17 00:00:00 2001 From: viresh kumar Date: Mon, 29 Mar 2010 05:28:32 +0100 Subject: ARM: 5999/1: Including device.h and resource.h header files in linux/amba/bus.h linux/amba/bus.h have dependencies on linux/device.h and linux/resource.h, but it doesn't include them. We get compilation errors in our files which include bus.h but doesn't include device.h and resource.h. This patch includes device.h and resource.h in linux/amba/bus.h file. Signed-off-by: Viresh Kumar Acked-by: Linux Walleij Signed-off-by: Russell King --- include/linux/amba/bus.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index 6816be6c3f77..8b1038607831 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -14,6 +14,9 @@ #ifndef ASMARM_AMBA_H #define ASMARM_AMBA_H +#include +#include + #define AMBA_NR_IRQS 2 struct amba_device { -- cgit v1.2.3 From 367d6acceaacff1adc44f121543effb9c060e575 Mon Sep 17 00:00:00 2001 From: viresh kumar Date: Mon, 29 Mar 2010 05:29:56 +0100 Subject: ARM: 6003/1: removing compilation warning from pl061.h pl061.h is using u8 type. including in pl061.h to avoid warning. Signed-off-by: Viresh Kumar Acked-by: Baruch Siach Signed-off-by: Russell King --- include/linux/amba/pl061.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/amba/pl061.h b/include/linux/amba/pl061.h index b4fbd9862606..5ddd9ad4b19c 100644 --- a/include/linux/amba/pl061.h +++ b/include/linux/amba/pl061.h @@ -1,3 +1,5 @@ +#include + /* platform data for the PL061 GPIO driver */ struct pl061_platform_data { -- cgit v1.2.3 From de329820e920cd9cfbc2127cad26a37026260cce Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 29 Mar 2010 14:30:19 -0700 Subject: ext3: fix broken handling of EXT3_STATE_NEW In commit 9df93939b735 ("ext3: Use bitops to read/modify EXT3_I(inode)->i_state") ext3 changed its internal 'i_state' variable to use bitops for its state handling. However, unline the same ext4 change, it didn't actually change the name of the field when it changed the semantics of it. As a result, an old use of 'i_state' remained in fs/ext3/ialloc.c that initialized the field to EXT3_STATE_NEW. And that does not work _at_all_ when we're now working with individually named bits rather than values that get masked. So the code tried to mark the state to be new, but in actual fact set the field to EXT3_STATE_JDATA. Which makes no sense at all, and screws up all the code that checks whether the inode was newly allocated. In particular, it made the xattr code unhappy, and caused various random behavior, like apparently https://bugzilla.redhat.com/show_bug.cgi?id=577911 So fix the initialization, and rename the field to match ext4 so that we don't have this happen again. Cc: James Morris Cc: Stephen Smalley Cc: Daniel J Walsh Cc: Eric Paris Cc: Jan Kara Signed-off-by: Linus Torvalds --- include/linux/ext3_fs.h | 6 +++--- include/linux/ext3_fs_i.h | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ext3_fs.h b/include/linux/ext3_fs.h index cac84b006667..5f494b465097 100644 --- a/include/linux/ext3_fs.h +++ b/include/linux/ext3_fs.h @@ -565,17 +565,17 @@ enum { static inline int ext3_test_inode_state(struct inode *inode, int bit) { - return test_bit(bit, &EXT3_I(inode)->i_state); + return test_bit(bit, &EXT3_I(inode)->i_state_flags); } static inline void ext3_set_inode_state(struct inode *inode, int bit) { - set_bit(bit, &EXT3_I(inode)->i_state); + set_bit(bit, &EXT3_I(inode)->i_state_flags); } static inline void ext3_clear_inode_state(struct inode *inode, int bit) { - clear_bit(bit, &EXT3_I(inode)->i_state); + clear_bit(bit, &EXT3_I(inode)->i_state_flags); } #else /* Assume that user mode programs are passing in an ext3fs superblock, not diff --git a/include/linux/ext3_fs_i.h b/include/linux/ext3_fs_i.h index 7679acdb519a..f42c098aed8d 100644 --- a/include/linux/ext3_fs_i.h +++ b/include/linux/ext3_fs_i.h @@ -87,7 +87,7 @@ struct ext3_inode_info { * near to their parent directory's inode. */ __u32 i_block_group; - unsigned long i_state; /* Dynamic state flags for ext3 */ + unsigned long i_state_flags; /* Dynamic state flags for ext3 */ /* block reservation info */ struct ext3_block_alloc_info *i_block_alloc_info; -- cgit v1.2.3 From 5a0e3ad6af8660be21ca98a971cd00f331318c05 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 24 Mar 2010 17:04:11 +0900 Subject: include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn --- include/linux/delayacct.h | 1 + include/linux/fsnotify.h | 1 + include/linux/gameport.h | 1 + include/linux/io-mapping.h | 1 + include/linux/jbd.h | 1 + include/linux/jbd2.h | 1 + include/linux/security.h | 2 +- include/linux/spi/spi.h | 1 + include/linux/taskstats_kern.h | 1 + include/linux/usb/gadget.h | 2 ++ include/linux/wimax/debug.h | 1 + 11 files changed, 12 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/delayacct.h b/include/linux/delayacct.h index 5076fe0c8a96..6cee17c22313 100644 --- a/include/linux/delayacct.h +++ b/include/linux/delayacct.h @@ -18,6 +18,7 @@ #define _LINUX_DELAYACCT_H #include +#include /* * Per-task flags relevant to delay accounting diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h index df8fd9a3b214..01755909ce81 100644 --- a/include/linux/fsnotify.h +++ b/include/linux/fsnotify.h @@ -15,6 +15,7 @@ #include #include #include +#include /* * fsnotify_d_instantiate - instantiate a dentry for inode diff --git a/include/linux/gameport.h b/include/linux/gameport.h index 48e68da097f6..361d1cc288d0 100644 --- a/include/linux/gameport.h +++ b/include/linux/gameport.h @@ -16,6 +16,7 @@ #include #include #include +#include struct gameport { diff --git a/include/linux/io-mapping.h b/include/linux/io-mapping.h index 97eb928b4924..25085ddd955f 100644 --- a/include/linux/io-mapping.h +++ b/include/linux/io-mapping.h @@ -19,6 +19,7 @@ #define _LINUX_IO_MAPPING_H #include +#include #include #include #include diff --git a/include/linux/jbd.h b/include/linux/jbd.h index f3aa59cb675d..516a2a27e87a 100644 --- a/include/linux/jbd.h +++ b/include/linux/jbd.h @@ -31,6 +31,7 @@ #include #include #include +#include #define journal_oom_retry 1 diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index 1ec876358180..a4d2e9f7088a 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -30,6 +30,7 @@ #include #include #include +#include #endif #define journal_oom_retry 1 diff --git a/include/linux/security.h b/include/linux/security.h index 233d20b52c1b..3158dd982d27 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -33,7 +33,7 @@ #include #include #include -#include +#include #include /* Maximum number of letters for an LSM name string */ diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 97b60b37f445..af56071b06f9 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -21,6 +21,7 @@ #include #include +#include /* * INTERFACES between SPI master-side drivers and SPI infrastructure. diff --git a/include/linux/taskstats_kern.h b/include/linux/taskstats_kern.h index b6523c1427ce..58de6edf751f 100644 --- a/include/linux/taskstats_kern.h +++ b/include/linux/taskstats_kern.h @@ -9,6 +9,7 @@ #include #include +#include #ifdef CONFIG_TASKSTATS extern struct kmem_cache *taskstats_cache; diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index bbf45d500b6d..f4b7ca516cdd 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -15,6 +15,8 @@ #ifndef __LINUX_USB_GADGET_H #define __LINUX_USB_GADGET_H +#include + struct usb_ep; /** diff --git a/include/linux/wimax/debug.h b/include/linux/wimax/debug.h index db8096e88533..57031b4d12f2 100644 --- a/include/linux/wimax/debug.h +++ b/include/linux/wimax/debug.h @@ -155,6 +155,7 @@ #include #include +#include /* Backend stuff */ -- cgit v1.2.3 From de380b55f92986c1a84198149cb71b7228d15fbd Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 24 Mar 2010 17:06:43 +0900 Subject: percpu: don't implicitly include slab.h from percpu.h percpu.h has always been including slab.h to get k[mz]alloc/free() for UP inline implementation. percpu.h being used by very low level headers including module.h and sched.h, this meant that a lot files unintentionally got slab.h inclusion. Lee Schermerhorn was trying to make topology.h use percpu.h and got bitten by this implicit inclusion. The right thing to do is break this ultimately unnecessary dependency. The previous patch added explicit inclusion of either gfp.h or slab.h to the source files using them. This patch updates percpu.h such that slab.h is no longer included from percpu.h. Signed-off-by: Tejun Heo Reviewed-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn --- include/linux/percpu.h | 30 +++++------------------------- 1 file changed, 5 insertions(+), 25 deletions(-) (limited to 'include/linux') diff --git a/include/linux/percpu.h b/include/linux/percpu.h index a93e5bfdccb8..c7845130bfdf 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -2,10 +2,10 @@ #define __LINUX_PERCPU_H #include -#include /* For kmalloc() */ #include #include #include +#include #include @@ -135,9 +135,6 @@ extern int __init pcpu_page_first_chunk(size_t reserved_size, #define per_cpu_ptr(ptr, cpu) SHIFT_PERCPU_PTR((ptr), per_cpu_offset((cpu))) extern void __percpu *__alloc_reserved_percpu(size_t size, size_t align); -extern void __percpu *__alloc_percpu(size_t size, size_t align); -extern void free_percpu(void __percpu *__pdata); -extern phys_addr_t per_cpu_ptr_to_phys(void *addr); #ifndef CONFIG_HAVE_SETUP_PER_CPU_AREA extern void __init setup_per_cpu_areas(void); @@ -147,27 +144,6 @@ extern void __init setup_per_cpu_areas(void); #define per_cpu_ptr(ptr, cpu) ({ (void)(cpu); (ptr); }) -static inline void __percpu *__alloc_percpu(size_t size, size_t align) -{ - /* - * Can't easily make larger alignment work with kmalloc. WARN - * on it. Larger alignment should only be used for module - * percpu sections on SMP for which this path isn't used. - */ - WARN_ON_ONCE(align > SMP_CACHE_BYTES); - return kzalloc(size, GFP_KERNEL); -} - -static inline void free_percpu(void __percpu *p) -{ - kfree(p); -} - -static inline phys_addr_t per_cpu_ptr_to_phys(void *addr) -{ - return __pa(addr); -} - static inline void __init setup_per_cpu_areas(void) { } static inline void *pcpu_lpage_remapped(void *kaddr) @@ -177,6 +153,10 @@ static inline void *pcpu_lpage_remapped(void *kaddr) #endif /* CONFIG_SMP */ +extern void __percpu *__alloc_percpu(size_t size, size_t align); +extern void free_percpu(void __percpu *__pdata); +extern phys_addr_t per_cpu_ptr_to_phys(void *addr); + #define alloc_percpu(type) \ (typeof(type) __percpu *)__alloc_percpu(sizeof(type), __alignof__(type)) -- cgit v1.2.3 From d5e50daf92df8afcb701fd717b301985691e802f Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 31 Mar 2010 11:33:42 +0900 Subject: module: add stub for is_module_percpu_address Fix build for CONFIG_MODULES not enabled by providing a stub for is_module_percpu_address(). kernel/lockdep.c:605: error: implicit declaration of function 'is_module_percpu_address' Signed-off-by: Randy Dunlap Signed-off-by: Tejun Heo --- include/linux/module.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/module.h b/include/linux/module.h index f0e2659f4e3e..8bd399a00343 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -567,6 +567,11 @@ static inline bool is_module_address(unsigned long addr) return false; } +static inline bool is_module_percpu_address(unsigned long addr) +{ + return false; +} + static inline bool is_module_text_address(unsigned long addr) { return false; -- cgit v1.2.3 From e49a5bd38159dfb1928fd25b173bc9de4bbadb21 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Mon, 22 Mar 2010 19:40:03 +0100 Subject: perf: Use hot regs with software sched switch/migrate events Scheduler's task migration events don't work because they always pass NULL regs perf_sw_event(). The event hence gets filtered in perf_swevent_add(). Scheduler's context switches events use task_pt_regs() to get the context when the event occured which is a wrong thing to do as this won't give us the place in the kernel where we went to sleep but the place where we left userspace. The result is even more wrong if we switch from a kernel thread. Use the hot regs snapshot for both events as they belong to the non-interrupt/exception based events family. Unlike page faults or so that provide the regs matching the exact origin of the event, we need to save the current context. This makes the task migration event working and fix the context switch callchains and origin ip. Example: perf record -a -e cs Before: 10.91% ksoftirqd/0 0 [k] 0000000000000000 | --- (nil) perf_callchain perf_prepare_sample __perf_event_overflow perf_swevent_overflow perf_swevent_add perf_swevent_ctx_event do_perf_sw_event __perf_sw_event perf_event_task_sched_out schedule run_ksoftirqd kthread kernel_thread_helper After: 23.77% hald-addon-stor [kernel.kallsyms] [k] schedule | --- schedule | |--60.00%-- schedule_timeout | wait_for_common | wait_for_completion | blk_execute_rq | scsi_execute | scsi_execute_req | sr_test_unit_ready | | | |--66.67%-- sr_media_change | | media_changed | | cdrom_media_changed | | sr_block_media_changed | | check_disk_change | | cdrom_open v2: Always build perf_arch_fetch_caller_regs() now that software events need that too. They don't need it from modules, unlike trace events, so we keep the EXPORT_SYMBOL in trace_event_perf.c Signed-off-by: Frederic Weisbecker Cc: Peter Zijlstra Cc: Arnaldo Carvalho de Melo Cc: Paul Mackerras Cc: Ingo Molnar Cc: David Miller --- include/linux/perf_event.h | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 95477038a72a..c8e375440403 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -842,13 +842,6 @@ extern atomic_t perf_swevent_enabled[PERF_COUNT_SW_MAX]; extern void __perf_sw_event(u32, u64, int, struct pt_regs *, u64); -static inline void -perf_sw_event(u32 event_id, u64 nr, int nmi, struct pt_regs *regs, u64 addr) -{ - if (atomic_read(&perf_swevent_enabled[event_id])) - __perf_sw_event(event_id, nr, nmi, regs, addr); -} - extern void perf_arch_fetch_caller_regs(struct pt_regs *regs, unsigned long ip, int skip); @@ -887,6 +880,20 @@ static inline void perf_fetch_caller_regs(struct pt_regs *regs, int skip) return perf_arch_fetch_caller_regs(regs, ip, skip); } +static inline void +perf_sw_event(u32 event_id, u64 nr, int nmi, struct pt_regs *regs, u64 addr) +{ + if (atomic_read(&perf_swevent_enabled[event_id])) { + struct pt_regs hot_regs; + + if (!regs) { + perf_fetch_caller_regs(&hot_regs, 1); + regs = &hot_regs; + } + __perf_sw_event(event_id, nr, nmi, regs, addr); + } +} + extern void __perf_event_mmap(struct vm_area_struct *vma); static inline void perf_event_mmap(struct vm_area_struct *vma) -- cgit v1.2.3 From 5fbfb18d7a5b846946d52c4a10e3aaa213ec31b6 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Thu, 1 Apr 2010 19:09:40 +1100 Subject: Fix up possibly racy module refcounting Module refcounting is implemented with a per-cpu counter for speed. However there is a race when tallying the counter where a reference may be taken by one CPU and released by another. Reference count summation may then see the decrement without having seen the previous increment, leading to lower than expected count. A module which never has its actual reference drop below 1 may return a reference count of 0 due to this race. Module removal generally runs under stop_machine, which prevents this race causing bugs due to removal of in-use modules. However there are other real bugs in module.c code and driver code (module_refcount is exported) where the callers do not run under stop_machine. Fix this by maintaining running per-cpu counters for the number of module refcount increments and the number of refcount decrements. The increments are tallied after the decrements, so any decrement seen will always have its corresponding increment counted. The final refcount is the difference of the total increments and decrements, preventing a low-refcount from being returned. Signed-off-by: Nick Piggin Acked-by: Rusty Russell Signed-off-by: Linus Torvalds --- include/linux/module.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/module.h b/include/linux/module.h index 8bd399a00343..515d53ae6a79 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -368,7 +368,8 @@ struct module void (*exit)(void); struct module_ref { - int count; + unsigned int incs; + unsigned int decs; } __percpu *refptr; #endif @@ -463,9 +464,9 @@ static inline void __module_get(struct module *module) { if (module) { preempt_disable(); - __this_cpu_inc(module->refptr->count); + __this_cpu_inc(module->refptr->incs); trace_module_get(module, _THIS_IP_, - __this_cpu_read(module->refptr->count)); + __this_cpu_read(module->refptr->incs)); preempt_enable(); } } @@ -478,11 +479,10 @@ static inline int try_module_get(struct module *module) preempt_disable(); if (likely(module_is_live(module))) { - __this_cpu_inc(module->refptr->count); + __this_cpu_inc(module->refptr->incs); trace_module_get(module, _THIS_IP_, - __this_cpu_read(module->refptr->count)); - } - else + __this_cpu_read(module->refptr->incs)); + } else ret = 0; preempt_enable(); -- cgit v1.2.3 From 445d211b0da4e9a6e6d576edff85085c2aaf53df Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 5 Apr 2010 10:33:13 +0900 Subject: libata: unlock HPA if device shrunk Some BIOSes don't configure HPA during boot but do so while resuming. This causes harddrives to shrink during resume making libata detach and reattach them. This can be worked around by unlocking HPA if old size equals native size. Add ATA_DFLAG_UNLOCK_HPA so that HPA unlocking can be controlled per-device and update ata_dev_revalidate() such that it sets ATA_DFLAG_UNLOCK_HPA and fails with -EIO when the above condition is detected. This patch fixes the following bug. https://bugzilla.kernel.org/show_bug.cgi?id=15396 Signed-off-by: Tejun Heo Reported-by: Oleksandr Yermolenko Signed-off-by: Jeff Garzik --- include/linux/libata.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index f8ea71e6d0e2..b2f2003b92e5 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -146,6 +146,7 @@ enum { ATA_DFLAG_SLEEPING = (1 << 15), /* device is sleeping */ ATA_DFLAG_DUBIOUS_XFER = (1 << 16), /* data transfer not verified */ ATA_DFLAG_NO_UNLOAD = (1 << 17), /* device doesn't support unload */ + ATA_DFLAG_UNLOCK_HPA = (1 << 18), /* unlock HPA */ ATA_DFLAG_INIT_MASK = (1 << 24) - 1, ATA_DFLAG_DETACH = (1 << 24), -- cgit v1.2.3 From 6a740aa4f47b9f29bad5292cf51f008f3edad9b1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bruno=20Pr=C3=A9mont?= Date: Sun, 25 Apr 2010 21:40:03 +0200 Subject: HID: add suspend/resume hooks for hid drivers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add suspend/resume hooks for HID drivers so these can do some additional state adjustment when device gets suspended/resumed. Signed-off-by: Bruno Prémont Signed-off-by: Jiri Kosina --- include/linux/hid.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/hid.h b/include/linux/hid.h index b1344ec4b7fc..069e587ae8e6 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -589,6 +589,9 @@ struct hid_usage_id { * @report_fixup: called before report descriptor parsing (NULL means nop) * @input_mapping: invoked on input registering before mapping an usage * @input_mapped: invoked on input registering after mapping an usage + * @suspend: invoked on suspend (NULL means nop) + * @resume: invoked on resume if device was not reset (NULL means nop) + * @reset_resume: invoked on resume if device was reset (NULL means nop) * * raw_event and event should return 0 on no action performed, 1 when no * further processing should be done and negative on error @@ -629,6 +632,11 @@ struct hid_driver { int (*input_mapped)(struct hid_device *hdev, struct hid_input *hidinput, struct hid_field *field, struct hid_usage *usage, unsigned long **bit, int *max); +#ifdef CONFIG_PM + int (*suspend)(struct hid_device *hdev, pm_message_t message); + int (*resume)(struct hid_device *hdev); + int (*reset_resume)(struct hid_device *hdev); +#endif /* private: */ struct device_driver driver; }; -- cgit v1.2.3