From 7b8278358cc2b453ca6e75eedb3741cdb7e97236 Mon Sep 17 00:00:00 2001 From: Aristeu Rozanski Date: Wed, 18 Jun 2014 11:05:01 -0300 Subject: edac: add DDR4 and RDDR4 Haswell memory controller can make use of DDR4 and Registered DDR4 Cc: tony.luck@intel.com Signed-off-by: Aristeu Rozanski Signed-off-by: Mauro Carvalho Chehab --- include/linux/edac.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/edac.h b/include/linux/edac.h index 8e6c20af11a2..e1e68da6f35c 100644 --- a/include/linux/edac.h +++ b/include/linux/edac.h @@ -194,6 +194,9 @@ static inline char *mc_event_error_type(const unsigned int err_type) * @MEM_DDR3: DDR3 RAM * @MEM_RDDR3: Registered DDR3 RAM * This is a variant of the DDR3 memories. + * @MEM_DDR4: DDR4 RAM + * @MEM_RDDR4: Registered DDR4 RAM + * This is a variant of the DDR4 memories. */ enum mem_type { MEM_EMPTY = 0, @@ -213,6 +216,8 @@ enum mem_type { MEM_XDR, MEM_DDR3, MEM_RDDR3, + MEM_DDR4, + MEM_RDDR4, }; #define MEM_FLAG_EMPTY BIT(MEM_EMPTY) -- cgit v1.2.3 From f8ec894945e7d205ce62be59e55e72c4304e4739 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Fri, 25 Jul 2014 17:16:42 -0700 Subject: Input: MT - make slot cleanup callable outside mt_sync_frame() Some semi-mt drivers use the slots in a manual way, but may still want to call parts of the frame synchronization logic. This patch makes input_mt_drop_unused callable from those drivers. Signed-off-by: Henrik Rydberg Reviewed-by: Benson Leung Signed-off-by: Dmitry Torokhov --- include/linux/input/mt.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/input/mt.h b/include/linux/input/mt.h index 1b1dfa80d9ff..f583ff639776 100644 --- a/include/linux/input/mt.h +++ b/include/linux/input/mt.h @@ -105,6 +105,7 @@ void input_mt_report_slot_state(struct input_dev *dev, void input_mt_report_finger_count(struct input_dev *dev, int count); void input_mt_report_pointer_emulation(struct input_dev *dev, bool use_count); +void input_mt_drop_unused(struct input_dev *dev); void input_mt_sync_frame(struct input_dev *dev); -- cgit v1.2.3 From 2c67568903d6ae1b8cfa343c649029180239418e Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 8 Aug 2014 13:02:36 +0200 Subject: spi: Add missing kerneldoc bits These are all arguments or fields that got added without updating the kerneldoc comments. Signed-off-by: Thierry Reding Signed-off-by: Mark Brown --- include/linux/spi/spi.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index e713543336f1..46d188a9947c 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -253,6 +253,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * the device whose settings are being modified. * @transfer: adds a message to the controller's transfer queue. * @cleanup: frees controller-specific state + * @can_dma: determine whether this master supports DMA * @queued: whether this master is providing an internal message queue * @kworker: thread struct for message pump * @kworker_task: pointer to task for message pump kworker thread @@ -262,6 +263,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * @cur_msg: the currently in-flight message * @cur_msg_prepared: spi_prepare_message was called for the currently * in-flight message + * @cur_msg_mapped: message has been mapped for DMA * @xfer_completion: used by core transfer_one_message() * @busy: message pump is busy * @running: message pump is running @@ -299,6 +301,10 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * @cs_gpios: Array of GPIOs to use as chip select lines; one per CS * number. Any individual value may be -ENOENT for CS lines that * are not GPIOs (driven by the SPI controller itself). + * @dma_tx: DMA transmit channel + * @dma_rx: DMA receive channel + * @dummy_rx: dummy receive buffer for full-duplex devices + * @dummy_tx: dummy transmit buffer for full-duplex devices * * Each SPI master controller can communicate with one or more @spi_device * children. These make a small bus, sharing MOSI, MISO and SCK signals @@ -632,6 +638,7 @@ struct spi_transfer { * addresses for each transfer buffer * @complete: called to report transaction completions * @context: the argument to complete() when it's called + * @frame_length: the total number of bytes in the message * @actual_length: the total number of bytes that were transferred in all * successful segments * @status: zero for success, else negative errno -- cgit v1.2.3 From 8a58d1f1f373238cb0d6d7f8d3dd723aa164b8ac Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 15 Aug 2014 12:38:41 -0600 Subject: blk-mq: get rid of unused BLK_MQ_F_SHOULD_SORT flag We used to use this for determining whether to sort the dispatch list, but it's unused now. Signed-off-by: Jens Axboe --- include/linux/blk-mq.h | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/blk-mq.h b/include/linux/blk-mq.h index eb726b9c5762..a1e31f274fcd 100644 --- a/include/linux/blk-mq.h +++ b/include/linux/blk-mq.h @@ -127,10 +127,9 @@ enum { BLK_MQ_RQ_QUEUE_ERROR = 2, /* end IO with error */ BLK_MQ_F_SHOULD_MERGE = 1 << 0, - BLK_MQ_F_SHOULD_SORT = 1 << 1, - BLK_MQ_F_TAG_SHARED = 1 << 2, - BLK_MQ_F_SG_MERGE = 1 << 3, - BLK_MQ_F_SYSFS_UP = 1 << 4, + BLK_MQ_F_TAG_SHARED = 1 << 1, + BLK_MQ_F_SG_MERGE = 1 << 2, + BLK_MQ_F_SYSFS_UP = 1 << 3, BLK_MQ_S_STOPPED = 0, BLK_MQ_S_TAG_ACTIVE = 1, -- cgit v1.2.3 From 16466f4284154311f163a58b77379eb186274f87 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 14 Aug 2014 16:52:51 -0700 Subject: net: phy: bcm7xxx: remove 28nm wildcard entry A wildcard entry with the 32-bits OUI 0x600d8400 was added as part of the BCM7xxx internal PHY driver, but that entry might match other PHYs that are not covered by this driver, so let's just remove it. Fixes: b560a58c45c6 ("net: phy: add Broadcom BCM7xxx internal PHY driver") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- include/linux/brcmphy.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h index 6f76277baf39..61219b9b3445 100644 --- a/include/linux/brcmphy.h +++ b/include/linux/brcmphy.h @@ -16,7 +16,6 @@ #define PHY_ID_BCM7366 0x600d8490 #define PHY_ID_BCM7439 0x600d8480 #define PHY_ID_BCM7445 0x600d8510 -#define PHY_ID_BCM7XXX_28 0x600d8400 #define PHY_BCM_OUI_MASK 0xfffffc00 #define PHY_BCM_OUI_1 0x00206000 -- cgit v1.2.3 From 366047515c6eab2ff886bc28d1c2b0ad041d040a Mon Sep 17 00:00:00 2001 From: Lan Tianyu Date: Fri, 15 Aug 2014 13:38:59 +0800 Subject: i2c: rework kernel config I2C_ACPI Commit da3c6647(I2C/ACPI: Clean up I2C ACPI code and Add CONFIG_I2C_ACPI config) adds a new kernel config I2C_ACPI and make I2C core built in when the config is selected. This is wrong because distributions etc generally compile I2C as a module and the commit broken that. This patch is to rename I2C_ACPI to ACPI_I2C_OPREGION. New config only controls ACPI I2C operation region code and depends on I2C=y. Signed-off-by: Lan Tianyu Reviewed-by: Mika Westerberg [wsa: removed unrelated change for Kconfig] Signed-off-by: Wolfram Sang --- include/linux/i2c.h | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/i2c.h b/include/linux/i2c.h index ea507665896c..a95efeb53a8b 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -577,16 +577,20 @@ static inline struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node } #endif /* CONFIG_OF */ -#ifdef CONFIG_I2C_ACPI -int acpi_i2c_install_space_handler(struct i2c_adapter *adapter); -void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter); +#ifdef CONFIG_ACPI void acpi_i2c_register_devices(struct i2c_adapter *adap); #else static inline void acpi_i2c_register_devices(struct i2c_adapter *adap) { } +#endif /* CONFIG_ACPI */ + +#ifdef CONFIG_ACPI_I2C_OPREGION +int acpi_i2c_install_space_handler(struct i2c_adapter *adapter); +void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter); +#else static inline void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter) { } static inline int acpi_i2c_install_space_handler(struct i2c_adapter *adapter) { return 0; } -#endif +#endif /* CONFIG_ACPI_I2C_OPREGION */ #endif /* _LINUX_I2C_H */ -- cgit v1.2.3 From b25046b1e5e3f1423434da77ccc859f2f779d1ce Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Sun, 17 Aug 2014 10:29:42 +0200 Subject: mtd: nand: fix DocBook warnings on nand_sdr_timings doc Change the comment type (from /** to /*) to prevent DocBook from complaining about missing description for nand_sdr_timings fields. There is currently no need in documenting those fields because they are fully described in the ONFI specification (which is pointed out in the comment). Signed-off-by: Boris BREZILLON Reported-by: Randy Dunlap Acked-by: Randy Dunlap Tested-by: Randy Dunlap Signed-off-by: Brian Norris --- include/linux/mtd/nand.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 3083c53e0270..c300db3ae285 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -949,7 +949,7 @@ static inline int jedec_feature(struct nand_chip *chip) : 0; } -/** +/* * struct nand_sdr_timings - SDR NAND chip timings * * This struct defines the timing requirements of a SDR NAND chip. -- cgit v1.2.3 From 58b84f6a97f7f8811e0636836734809ff52cad43 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 19 Aug 2014 12:00:53 -0500 Subject: gpio: move GPIOD flags outside #ifdef The GPIOD flags are defined inside the #ifdef CONFIG_GPIOLIB switch, making the gpiolib stubs fail if these flags are used by a consumer. This is not correct: the stubs should compile fine without GPIOLIB. Reported-by: Ulf Hansson Reviewed-by: Alexandre Courbot Signed-off-by: Linus Walleij --- include/linux/gpio/consumer.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h index b7ce0c64c6f3..c7e17de732f3 100644 --- a/include/linux/gpio/consumer.h +++ b/include/linux/gpio/consumer.h @@ -16,8 +16,6 @@ struct device; */ struct gpio_desc; -#ifdef CONFIG_GPIOLIB - #define GPIOD_FLAGS_BIT_DIR_SET BIT(0) #define GPIOD_FLAGS_BIT_DIR_OUT BIT(1) #define GPIOD_FLAGS_BIT_DIR_VAL BIT(2) @@ -34,6 +32,8 @@ enum gpiod_flags { GPIOD_FLAGS_BIT_DIR_VAL, }; +#ifdef CONFIG_GPIOLIB + /* Acquire and dispose GPIOs */ struct gpio_desc *__must_check __gpiod_get(struct device *dev, const char *con_id, -- cgit v1.2.3 From c200b1aa6cb460ce8c3ecf6fdc690d3949c3cc5d Mon Sep 17 00:00:00 2001 From: Chao Yu Date: Wed, 20 Aug 2014 18:36:46 +0800 Subject: f2fs: fix incorrect calculation with total/free inode num Theoretically, our total inodes number is the same as total node number, but there are three node ids are reserved in f2fs, they are 0, 1 (node nid), and 2 (meta nid), and they should never be used by user, so our total/free inode number calculated in ->statfs is wrong. This patch indroduces F2FS_RESERVED_NODE_NUM and then fixes this issue by recalculating total/free inode number with the macro. Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim --- include/linux/f2fs_fs.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/f2fs_fs.h b/include/linux/f2fs_fs.h index 6ff0b0b42d47..0ed77f32c9ac 100644 --- a/include/linux/f2fs_fs.h +++ b/include/linux/f2fs_fs.h @@ -24,6 +24,9 @@ #define NULL_ADDR ((block_t)0) /* used as block_t addresses */ #define NEW_ADDR ((block_t)-1) /* used as block_t addresses */ +/* 0, 1(node nid), 2(meta nid) are reserved node id */ +#define F2FS_RESERVED_NODE_NUM 3 + #define F2FS_ROOT_INO(sbi) (sbi->root_ino_num) #define F2FS_NODE_INO(sbi) (sbi->node_ino_num) #define F2FS_META_INO(sbi) (sbi->meta_ino_num) -- cgit v1.2.3 From 33b7f99cf003ca6c1d31c42b50e1100ad71aaec0 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Red Hat)" Date: Fri, 15 Aug 2014 17:23:02 -0400 Subject: ftrace: Allow ftrace_ops to use the hashes from other ops Currently the top level debug file system function tracer shares its ftrace_ops with the function graph tracer. This was thought to be fine because the tracers are not used together, as one can only enable function or function_graph tracer in the current_tracer file. But that assumption proved to be incorrect. The function profiler can use the function graph tracer when function tracing is enabled. Since all function graph users uses the function tracing ftrace_ops this causes a conflict and when a user enables both function profiling as well as the function tracer it will crash ftrace and disable it. The quick solution so far is to move them as separate ftrace_ops like it was earlier. The problem though is to synchronize the functions that are traced because both function and function_graph tracer are limited by the selections made in the set_ftrace_filter and set_ftrace_notrace files. To handle this, a new structure is made called ftrace_ops_hash. This structure will now hold the filter_hash and notrace_hash, and the ftrace_ops will point to this structure. That will allow two ftrace_ops to share the same hashes. Since most ftrace_ops do not share the hashes, and to keep allocation simple, the ftrace_ops structure will include both a pointer to the ftrace_ops_hash called func_hash, as well as the structure itself, called local_hash. When the ops are registered, the func_hash pointer will be initialized to point to the local_hash within the ftrace_ops structure. Some of the ftrace internal ftrace_ops will be initialized statically. This will allow for the function and function_graph tracer to have separate ops but still share the same hash tables that determine what functions they trace. Cc: stable@vger.kernel.org # 3.16 (apply after 3.17-rc4 is out) Signed-off-by: Steven Rostedt --- include/linux/ftrace.h | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 6bb5e3f2a3b4..f0b0edbf55a9 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -102,6 +102,15 @@ enum { FTRACE_OPS_FL_DELETED = 1 << 8, }; +#ifdef CONFIG_DYNAMIC_FTRACE +/* The hash used to know what functions callbacks trace */ +struct ftrace_ops_hash { + struct ftrace_hash *notrace_hash; + struct ftrace_hash *filter_hash; + struct mutex regex_lock; +}; +#endif + /* * Note, ftrace_ops can be referenced outside of RCU protection. * (Although, for perf, the control ops prevent that). If ftrace_ops is @@ -121,10 +130,9 @@ struct ftrace_ops { int __percpu *disabled; #ifdef CONFIG_DYNAMIC_FTRACE int nr_trampolines; - struct ftrace_hash *notrace_hash; - struct ftrace_hash *filter_hash; + struct ftrace_ops_hash local_hash; + struct ftrace_ops_hash *func_hash; struct ftrace_hash *tramp_hash; - struct mutex regex_lock; unsigned long trampoline; #endif }; -- cgit v1.2.3 From b5b822050ca3c4fc1f475100cc197cc00ba2d492 Mon Sep 17 00:00:00 2001 From: Chao Yu Date: Fri, 22 Aug 2014 16:17:38 +0800 Subject: f2fs: use macro for code readability This patch introduces DEF_NIDS_PER_INODE/GET_ORPHAN_BLOCKS/F2FS_CP_PACKS macro instead of numbers in code for readability. change log from v1: o fix typo pointed out by Jaegeuk Kim. Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim --- include/linux/f2fs_fs.h | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/f2fs_fs.h b/include/linux/f2fs_fs.h index 0ed77f32c9ac..08ed2b0a96e6 100644 --- a/include/linux/f2fs_fs.h +++ b/include/linux/f2fs_fs.h @@ -90,6 +90,8 @@ struct f2fs_super_block { #define CP_ORPHAN_PRESENT_FLAG 0x00000002 #define CP_UMOUNT_FLAG 0x00000001 +#define F2FS_CP_PACKS 2 /* # of checkpoint packs */ + struct f2fs_checkpoint { __le64 checkpoint_ver; /* checkpoint block version number */ __le64 user_block_count; /* # of user blocks */ @@ -126,6 +128,9 @@ struct f2fs_checkpoint { */ #define F2FS_ORPHANS_PER_BLOCK 1020 +#define GET_ORPHAN_BLOCKS(n) ((n + F2FS_ORPHANS_PER_BLOCK - 1) / \ + F2FS_ORPHANS_PER_BLOCK) + struct f2fs_orphan_block { __le32 ino[F2FS_ORPHANS_PER_BLOCK]; /* inode numbers */ __le32 reserved; /* reserved */ @@ -147,6 +152,7 @@ struct f2fs_extent { #define F2FS_NAME_LEN 255 #define F2FS_INLINE_XATTR_ADDRS 50 /* 200 bytes for inline xattrs */ #define DEF_ADDRS_PER_INODE 923 /* Address Pointers in an Inode */ +#define DEF_NIDS_PER_INODE 5 /* Node IDs in an Inode */ #define ADDRS_PER_INODE(fi) addrs_per_inode(fi) #define ADDRS_PER_BLOCK 1018 /* Address Pointers in a Direct Block */ #define NIDS_PER_BLOCK 1018 /* Node IDs in an Indirect Block */ @@ -166,8 +172,9 @@ struct f2fs_extent { #define MAX_INLINE_DATA (sizeof(__le32) * (DEF_ADDRS_PER_INODE - \ F2FS_INLINE_XATTR_ADDRS - 1)) -#define INLINE_DATA_OFFSET (PAGE_CACHE_SIZE - sizeof(struct node_footer) \ - - sizeof(__le32) * (DEF_ADDRS_PER_INODE + 5 - 1)) +#define INLINE_DATA_OFFSET (PAGE_CACHE_SIZE - sizeof(struct node_footer) -\ + sizeof(__le32) * (DEF_ADDRS_PER_INODE + \ + DEF_NIDS_PER_INODE - 1)) struct f2fs_inode { __le16 i_mode; /* file mode */ @@ -197,7 +204,7 @@ struct f2fs_inode { __le32 i_addr[DEF_ADDRS_PER_INODE]; /* Pointers to data blocks */ - __le32 i_nid[5]; /* direct(2), indirect(2), + __le32 i_nid[DEF_NIDS_PER_INODE]; /* direct(2), indirect(2), double_indirect(1) node id */ } __packed; -- cgit v1.2.3 From 7c3af975257383ece54b83c0505d3e0656cb7daf Mon Sep 17 00:00:00 2001 From: Weston Andros Adamson Date: Fri, 8 Aug 2014 11:00:57 -0400 Subject: nfs: don't sleep with inode lock in lock_and_join_requests This handles the 'nonblock=false' case in nfs_lock_and_join_requests. If the group is already locked and blocking is allowed, drop the inode lock and wait for the group lock to be cleared before trying it all again. This should fix warnings found in peterz's tree (sched/wait branch), where might_sleep() checks are added to wait.[ch]. Reported-by: Fengguang Wu Signed-off-by: Weston Andros Adamson Reviewed-by: Peng Tao Signed-off-by: Trond Myklebust --- include/linux/nfs_page.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/nfs_page.h b/include/linux/nfs_page.h index 6ad2bbcad405..6c3e06ee2fb7 100644 --- a/include/linux/nfs_page.h +++ b/include/linux/nfs_page.h @@ -123,6 +123,7 @@ extern int nfs_wait_on_request(struct nfs_page *); extern void nfs_unlock_request(struct nfs_page *req); extern void nfs_unlock_and_release_request(struct nfs_page *); extern int nfs_page_group_lock(struct nfs_page *, bool); +extern void nfs_page_group_lock_wait(struct nfs_page *); extern void nfs_page_group_unlock(struct nfs_page *); extern bool nfs_page_group_sync_on_bit(struct nfs_page *, unsigned int); -- cgit v1.2.3 From d1c85c2ebe7ffe1f1b27846bd1ba0944c513d822 Mon Sep 17 00:00:00 2001 From: Zhouyi Zhou Date: Fri, 22 Aug 2014 10:40:15 +0800 Subject: netfilter: HAVE_JUMP_LABEL instead of CONFIG_JUMP_LABEL Use HAVE_JUMP_LABEL as elsewhere in the kernel to ensure that the toolchain has the required support in addition to CONFIG_JUMP_LABEL being set. Signed-off-by: Zhouyi Zhou Reviewed-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h index 2077489f9887..2517ece98820 100644 --- a/include/linux/netfilter.h +++ b/include/linux/netfilter.h @@ -9,6 +9,7 @@ #include #include #include +#include #include #ifdef CONFIG_NETFILTER static inline int NF_DROP_GETERR(int verdict) @@ -99,9 +100,9 @@ void nf_unregister_sockopt(struct nf_sockopt_ops *reg); extern struct list_head nf_hooks[NFPROTO_NUMPROTO][NF_MAX_HOOKS]; -#if defined(CONFIG_JUMP_LABEL) -#include +#ifdef HAVE_JUMP_LABEL extern struct static_key nf_hooks_needed[NFPROTO_NUMPROTO][NF_MAX_HOOKS]; + static inline bool nf_hooks_active(u_int8_t pf, unsigned int hook) { if (__builtin_constant_p(pf) && -- cgit v1.2.3 From f153566570fb9e32c2f59182883f4f66048788fb Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Fri, 22 Aug 2014 21:48:00 +0100 Subject: iio:trigger: modify return value for iio_trigger_get Instead of a void function, return the trigger pointer. Whilst not in of itself a fix, this makes the following set of 7 fixes cleaner than they would otherwise be. Signed-off-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron Cc: Stable@vger.kernel.org --- include/linux/iio/trigger.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/iio/trigger.h b/include/linux/iio/trigger.h index 4b79ffe7b188..fa76c79a52a1 100644 --- a/include/linux/iio/trigger.h +++ b/include/linux/iio/trigger.h @@ -84,10 +84,12 @@ static inline void iio_trigger_put(struct iio_trigger *trig) put_device(&trig->dev); } -static inline void iio_trigger_get(struct iio_trigger *trig) +static inline struct iio_trigger *iio_trigger_get(struct iio_trigger *trig) { get_device(&trig->dev); __module_get(trig->ops->owner); + + return trig; } /** -- cgit v1.2.3 From 7d5929c1f34304ca5a970cfde8044053e56aa8c9 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Mon, 25 Aug 2014 16:15:32 -0700 Subject: mtd: nand: omap: Revert to using software ECC by default For v3.12 and prior, 1-bit Hamming code ECC via software was the default choice. Commit c66d039197e4 in v3.13 changed the behaviour to use 1-bit Hamming code via Hardware using a different ECC layout i.e. (ROM code layout) than what is used by software ECC. This ECC layout change causes NAND filesystems created in v3.12 and prior to be unusable in v3.13 and later. So revert back to using software ECC by default if an ECC scheme is not explicitely specified. This defect can be observed on the following boards during legacy boot -omap3beagle -omap3touchbook -overo -am3517crane -devkit8000 -ldp -3430sdp Signed-off-by: Roger Quadros Tested-by: Grazvydas Ignotas Signed-off-by: Tony Lindgren --- include/linux/platform_data/mtd-nand-omap2.h | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h index 660c029d694f..16ec262dfcc8 100644 --- a/include/linux/platform_data/mtd-nand-omap2.h +++ b/include/linux/platform_data/mtd-nand-omap2.h @@ -21,8 +21,17 @@ enum nand_io { }; enum omap_ecc { - /* 1-bit ECC calculation by GPMC, Error detection by Software */ - OMAP_ECC_HAM1_CODE_HW = 0, + /* + * 1-bit ECC: calculation and correction by SW + * ECC stored at end of spare area + */ + OMAP_ECC_HAM1_CODE_SW = 0, + + /* + * 1-bit ECC: calculation by GPMC, Error detection by Software + * ECC layout compatible with ROM code layout + */ + OMAP_ECC_HAM1_CODE_HW, /* 4-bit ECC calculation by GPMC, Error detection by Software */ OMAP_ECC_BCH4_CODE_HW_DETECTION_SW, /* 4-bit ECC calculation by GPMC, Error detection by ELM */ -- cgit v1.2.3 From 1f58d9465c568eb47cab939bbc4f30ae51863295 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 8 Aug 2014 13:06:30 +0200 Subject: dma-buf/fence: Fix one more kerneldoc warning The seqno_fence_init() function's cond argument isn't described in the kerneldoc comment. Fix that to silence a warning when building DocBook documentation. Signed-off-by: Thierry Reding Signed-off-by: Sumit Semwal --- include/linux/seqno-fence.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/seqno-fence.h b/include/linux/seqno-fence.h index 3d6003de4b0d..a1ba6a5ccdd6 100644 --- a/include/linux/seqno-fence.h +++ b/include/linux/seqno-fence.h @@ -62,6 +62,7 @@ to_seqno_fence(struct fence *fence) * @context: the execution context this fence is a part of * @seqno_ofs: the offset within @sync_buf * @seqno: the sequence # to signal on + * @cond: fence wait condition * @ops: the fence_ops for operations on this seqno fence * * This function initializes a struct seqno_fence with passed parameters, -- cgit v1.2.3 From a8dbfeedfe47a19a4712749eb2444b1d7ea1150e Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 27 Aug 2014 14:31:24 -0700 Subject: regulator: fix kernel-doc warnings in header files Fix kernel-doc warnings in regulator header files: Warning(..//include/linux/regulator/machine.h:140): No description found for parameter 'ramp_disable' Warning(..//include/linux/regulator/driver.h:279): No description found for parameter 'linear_ranges' Warning(..//include/linux/regulator/driver.h:279): No description found for parameter 'n_linear_ranges' Signed-off-by: Randy Dunlap Signed-off-by: Mark Brown --- include/linux/regulator/driver.h | 2 ++ include/linux/regulator/machine.h | 1 + 2 files changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index bbe03a1924c0..4efa1ed8a2b0 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -218,6 +218,8 @@ enum regulator_type { * @linear_min_sel: Minimal selector for starting linear mapping * @fixed_uV: Fixed voltage of rails. * @ramp_delay: Time to settle down after voltage change (unit: uV/us) + * @linear_ranges: A constant table of possible voltage ranges. + * @n_linear_ranges: Number of entries in the @linear_ranges table. * @volt_table: Voltage mapping table (if table based mapping) * * @vsel_reg: Register for selector when using regulator_regmap_X_voltage_ diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 730e638c5589..0b08d05d470b 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -85,6 +85,7 @@ struct regulator_state { * bootloader then it will be enabled when the constraints are * applied. * @apply_uV: Apply the voltage constraint when initialising. + * @ramp_disable: Disable ramp delay when initialising or when setting voltage. * * @input_uV: Input voltage for regulator when supplied by another regulator. * -- cgit v1.2.3 From db9ee220361de03ee86388f9ea5e529eaad5323c Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Wed, 27 Aug 2014 18:40:07 -0400 Subject: jbd2: fix descriptor block size handling errors with journal_csum It turns out that there are some serious problems with the on-disk format of journal checksum v2. The foremost is that the function to calculate descriptor tag size returns sizes that are too big. This causes alignment issues on some architectures and is compounded by the fact that some parts of jbd2 use the structure size (incorrectly) to determine the presence of a 64bit journal instead of checking the feature flags. Therefore, introduce journal checksum v3, which enlarges the descriptor block tag format to allow for full 32-bit checksums of journal blocks, fix the journal tag function to return the correct sizes, and fix the jbd2 recovery code to use feature flags to determine 64bitness. Add a few function helpers so we don't have to open-code quite so many pieces. Switching to a 16-byte block size was found to increase journal size overhead by a maximum of 0.1%, to convert a 32-bit journal with no checksumming to a 32-bit journal with checksum v3 enabled. Signed-off-by: Darrick J. Wong Reported-by: TR Reardon Signed-off-by: Theodore Ts'o Cc: stable@vger.kernel.org --- include/linux/jbd2.h | 30 +++++++++++++++++++++++++----- 1 file changed, 25 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index d5b50a19463c..0dae71e9971c 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -159,7 +159,11 @@ typedef struct journal_header_s * journal_block_tag (in the descriptor). The other h_chksum* fields are * not used. * - * Checksum v1 and v2 are mutually exclusive features. + * If FEATURE_INCOMPAT_CSUM_V3 is set, the descriptor block uses + * journal_block_tag3_t to store a full 32-bit checksum. Everything else + * is the same as v2. + * + * Checksum v1, v2, and v3 are mutually exclusive features. */ struct commit_header { __be32 h_magic; @@ -179,6 +183,14 @@ struct commit_header { * raw struct shouldn't be used for pointer math or sizeof() - use * journal_tag_bytes(journal) instead to compute this. */ +typedef struct journal_block_tag3_s +{ + __be32 t_blocknr; /* The on-disk block number */ + __be32 t_flags; /* See below */ + __be32 t_blocknr_high; /* most-significant high 32bits. */ + __be32 t_checksum; /* crc32c(uuid+seq+block) */ +} journal_block_tag3_t; + typedef struct journal_block_tag_s { __be32 t_blocknr; /* The on-disk block number */ @@ -187,9 +199,6 @@ typedef struct journal_block_tag_s __be32 t_blocknr_high; /* most-significant high 32bits. */ } journal_block_tag_t; -#define JBD2_TAG_SIZE32 (offsetof(journal_block_tag_t, t_blocknr_high)) -#define JBD2_TAG_SIZE64 (sizeof(journal_block_tag_t)) - /* Tail of descriptor block, for checksumming */ struct jbd2_journal_block_tail { __be32 t_checksum; /* crc32c(uuid+descr_block) */ @@ -284,6 +293,7 @@ typedef struct journal_superblock_s #define JBD2_FEATURE_INCOMPAT_64BIT 0x00000002 #define JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT 0x00000004 #define JBD2_FEATURE_INCOMPAT_CSUM_V2 0x00000008 +#define JBD2_FEATURE_INCOMPAT_CSUM_V3 0x00000010 /* Features known to this kernel version: */ #define JBD2_KNOWN_COMPAT_FEATURES JBD2_FEATURE_COMPAT_CHECKSUM @@ -291,7 +301,8 @@ typedef struct journal_superblock_s #define JBD2_KNOWN_INCOMPAT_FEATURES (JBD2_FEATURE_INCOMPAT_REVOKE | \ JBD2_FEATURE_INCOMPAT_64BIT | \ JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT | \ - JBD2_FEATURE_INCOMPAT_CSUM_V2) + JBD2_FEATURE_INCOMPAT_CSUM_V2 | \ + JBD2_FEATURE_INCOMPAT_CSUM_V3) #ifdef __KERNEL__ @@ -1296,6 +1307,15 @@ static inline int tid_geq(tid_t x, tid_t y) extern int jbd2_journal_blocks_per_page(struct inode *inode); extern size_t journal_tag_bytes(journal_t *journal); +static inline int jbd2_journal_has_csum_v2or3(journal_t *journal) +{ + if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_CSUM_V2) || + JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_CSUM_V3)) + return 1; + + return 0; +} + /* * We reserve t_outstanding_credits >> JBD2_CONTROL_BLOCKS_SHIFT for * transaction control blocks. -- cgit v1.2.3 From b95089d00c04712a9d4655d5c638930ac24b7bd3 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Wed, 27 Aug 2014 16:47:48 +0300 Subject: net/mlx4: Move the tunnel steering helper function to mlx4_core Move the function which we use to set VXLAN DMFS (flow-steering) rules from mlx4_en to mlx4_core. This refactoring will allow the mlx4_ib driver to call the helper for the use case of user-space RAW Ethernet QPs, such that they can serve VXLAN traffic too. Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- include/linux/mlx4/device.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index 071f6b234604..511c6e0d21a9 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -1196,6 +1196,9 @@ int mlx4_map_sw_to_hw_steering_id(struct mlx4_dev *dev, enum mlx4_net_trans_rule_id id); int mlx4_hw_rule_sz(struct mlx4_dev *dev, enum mlx4_net_trans_rule_id id); +int mlx4_tunnel_steer_add(struct mlx4_dev *dev, unsigned char *addr, + int port, int qpn, u16 prio, u64 *reg_id); + void mlx4_sync_pkey_table(struct mlx4_dev *dev, int slave, int port, int i, int val); -- cgit v1.2.3 From 0dbc8b7afef6e4fddcfebcbacbeb269a0a3b06d5 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 1 Sep 2014 15:15:40 +0200 Subject: gpio: move varargs hack outside #ifdef GPIOLIB commit 39b2bbe3d715cf5013b5c48695ccdd25bd3bf120 "gpio: add flags argument to gpiod_get*() functions" added a dynamic flags argument to all the GPIOD getter functions, however this did not cover the stubs so when people used gpiod stubs to compile out descriptor code, compilation failed. Solve this by: - Also rename all the stub functions __gpiod_* - Moving the vararg hack outside of #ifdef CONFIG_GPIOLIB so these will always be available. Reviewed-by: Alexandre Courbot Signed-off-by: Linus Walleij --- include/linux/gpio/consumer.h | 105 ++++++++++++++++++++++++------------------ 1 file changed, 60 insertions(+), 45 deletions(-) (limited to 'include/linux') diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h index c7e17de732f3..12f146fa6604 100644 --- a/include/linux/gpio/consumer.h +++ b/include/linux/gpio/consumer.h @@ -38,60 +38,32 @@ enum gpiod_flags { struct gpio_desc *__must_check __gpiod_get(struct device *dev, const char *con_id, enum gpiod_flags flags); -#define __gpiod_get(dev, con_id, flags, ...) __gpiod_get(dev, con_id, flags) -#define gpiod_get(varargs...) __gpiod_get(varargs, 0) struct gpio_desc *__must_check __gpiod_get_index(struct device *dev, const char *con_id, unsigned int idx, enum gpiod_flags flags); -#define __gpiod_get_index(dev, con_id, index, flags, ...) \ - __gpiod_get_index(dev, con_id, index, flags) -#define gpiod_get_index(varargs...) __gpiod_get_index(varargs, 0) struct gpio_desc *__must_check __gpiod_get_optional(struct device *dev, const char *con_id, enum gpiod_flags flags); -#define __gpiod_get_optional(dev, con_id, flags, ...) \ - __gpiod_get_optional(dev, con_id, flags) -#define gpiod_get_optional(varargs...) __gpiod_get_optional(varargs, 0) struct gpio_desc *__must_check __gpiod_get_index_optional(struct device *dev, const char *con_id, unsigned int index, enum gpiod_flags flags); -#define __gpiod_get_index_optional(dev, con_id, index, flags, ...) \ - __gpiod_get_index_optional(dev, con_id, index, flags) -#define gpiod_get_index_optional(varargs...) \ - __gpiod_get_index_optional(varargs, 0) - void gpiod_put(struct gpio_desc *desc); struct gpio_desc *__must_check __devm_gpiod_get(struct device *dev, const char *con_id, enum gpiod_flags flags); -#define __devm_gpiod_get(dev, con_id, flags, ...) \ - __devm_gpiod_get(dev, con_id, flags) -#define devm_gpiod_get(varargs...) __devm_gpiod_get(varargs, 0) struct gpio_desc *__must_check __devm_gpiod_get_index(struct device *dev, const char *con_id, unsigned int idx, enum gpiod_flags flags); -#define __devm_gpiod_get_index(dev, con_id, index, flags, ...) \ - __devm_gpiod_get_index(dev, con_id, index, flags) -#define devm_gpiod_get_index(varargs...) __devm_gpiod_get_index(varargs, 0) struct gpio_desc *__must_check __devm_gpiod_get_optional(struct device *dev, const char *con_id, enum gpiod_flags flags); -#define __devm_gpiod_get_optional(dev, con_id, flags, ...) \ - __devm_gpiod_get_optional(dev, con_id, flags) -#define devm_gpiod_get_optional(varargs...) \ - __devm_gpiod_get_optional(varargs, 0) struct gpio_desc *__must_check __devm_gpiod_get_index_optional(struct device *dev, const char *con_id, unsigned int index, enum gpiod_flags flags); -#define __devm_gpiod_get_index_optional(dev, con_id, index, flags, ...) \ - __devm_gpiod_get_index_optional(dev, con_id, index, flags) -#define devm_gpiod_get_index_optional(varargs...) \ - __devm_gpiod_get_index_optional(varargs, 0) - void devm_gpiod_put(struct device *dev, struct gpio_desc *desc); int gpiod_get_direction(const struct gpio_desc *desc); @@ -124,27 +96,31 @@ int desc_to_gpio(const struct gpio_desc *desc); #else /* CONFIG_GPIOLIB */ -static inline struct gpio_desc *__must_check gpiod_get(struct device *dev, - const char *con_id) +static inline struct gpio_desc *__must_check __gpiod_get(struct device *dev, + const char *con_id, + enum gpiod_flags flags) { return ERR_PTR(-ENOSYS); } -static inline struct gpio_desc *__must_check gpiod_get_index(struct device *dev, - const char *con_id, - unsigned int idx) +static inline struct gpio_desc *__must_check +__gpiod_get_index(struct device *dev, + const char *con_id, + unsigned int idx, + enum gpiod_flags flags) { return ERR_PTR(-ENOSYS); } static inline struct gpio_desc *__must_check -gpiod_get_optional(struct device *dev, const char *con_id) +__gpiod_get_optional(struct device *dev, const char *con_id, + enum gpiod_flags flags) { return ERR_PTR(-ENOSYS); } static inline struct gpio_desc *__must_check -gpiod_get_index_optional(struct device *dev, const char *con_id, - unsigned int index) +__gpiod_get_index_optional(struct device *dev, const char *con_id, + unsigned int index, enum gpiod_flags flags) { return ERR_PTR(-ENOSYS); } @@ -157,28 +133,33 @@ static inline void gpiod_put(struct gpio_desc *desc) WARN_ON(1); } -static inline struct gpio_desc *__must_check devm_gpiod_get(struct device *dev, - const char *con_id) +static inline struct gpio_desc *__must_check +__devm_gpiod_get(struct device *dev, + const char *con_id, + enum gpiod_flags flags) { return ERR_PTR(-ENOSYS); } static inline -struct gpio_desc *__must_check devm_gpiod_get_index(struct device *dev, - const char *con_id, - unsigned int idx) +struct gpio_desc *__must_check +__devm_gpiod_get_index(struct device *dev, + const char *con_id, + unsigned int idx, + enum gpiod_flags flags) { return ERR_PTR(-ENOSYS); } static inline struct gpio_desc *__must_check -devm_gpiod_get_optional(struct device *dev, const char *con_id) +__devm_gpiod_get_optional(struct device *dev, const char *con_id, + enum gpiod_flags flags) { return ERR_PTR(-ENOSYS); } static inline struct gpio_desc *__must_check -devm_gpiod_get_index_optional(struct device *dev, const char *con_id, - unsigned int index) +__devm_gpiod_get_index_optional(struct device *dev, const char *con_id, + unsigned int index, enum gpiod_flags flags) { return ERR_PTR(-ENOSYS); } @@ -303,9 +284,43 @@ static inline int desc_to_gpio(const struct gpio_desc *desc) return -EINVAL; } - #endif /* CONFIG_GPIOLIB */ +/* + * Vararg-hacks! This is done to transition the kernel to always pass + * the options flags argument to the below functions. During a transition + * phase these vararg macros make both old-and-newstyle code compile, + * but when all calls to the elder API are removed, these should go away + * and the __gpiod_get() etc functions above be renamed just gpiod_get() + * etc. + */ +#define __gpiod_get(dev, con_id, flags, ...) __gpiod_get(dev, con_id, flags) +#define gpiod_get(varargs...) __gpiod_get(varargs, 0) +#define __gpiod_get_index(dev, con_id, index, flags, ...) \ + __gpiod_get_index(dev, con_id, index, flags) +#define gpiod_get_index(varargs...) __gpiod_get_index(varargs, 0) +#define __gpiod_get_optional(dev, con_id, flags, ...) \ + __gpiod_get_optional(dev, con_id, flags) +#define gpiod_get_optional(varargs...) __gpiod_get_optional(varargs, 0) +#define __gpiod_get_index_optional(dev, con_id, index, flags, ...) \ + __gpiod_get_index_optional(dev, con_id, index, flags) +#define gpiod_get_index_optional(varargs...) \ + __gpiod_get_index_optional(varargs, 0) +#define __devm_gpiod_get(dev, con_id, flags, ...) \ + __devm_gpiod_get(dev, con_id, flags) +#define devm_gpiod_get(varargs...) __devm_gpiod_get(varargs, 0) +#define __devm_gpiod_get_index(dev, con_id, index, flags, ...) \ + __devm_gpiod_get_index(dev, con_id, index, flags) +#define devm_gpiod_get_index(varargs...) __devm_gpiod_get_index(varargs, 0) +#define __devm_gpiod_get_optional(dev, con_id, flags, ...) \ + __devm_gpiod_get_optional(dev, con_id, flags) +#define devm_gpiod_get_optional(varargs...) \ + __devm_gpiod_get_optional(varargs, 0) +#define __devm_gpiod_get_index_optional(dev, con_id, index, flags, ...) \ + __devm_gpiod_get_index_optional(dev, con_id, index, flags) +#define devm_gpiod_get_index_optional(varargs...) \ + __devm_gpiod_get_index_optional(varargs, 0) + #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS) int gpiod_export(struct gpio_desc *desc, bool direction_may_change); -- cgit v1.2.3 From 9067359faf890b3a18ab38c792d458fba77b32b4 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Tue, 2 Sep 2014 02:03:12 -0700 Subject: Revert "leds: convert blink timer to workqueue" This reverts commit 8b37e1bef5a6b60e949e28a4db3006e4b00bd758. It's broken as it changes led_blink_set() in a way that it can now sleep (while synchronously waiting for workqueue to be cancelled). That's a problem, because it's possible that this function gets called from atomic context (tpt_trig_timer() takes a readlock and thus disables preemption). This has been brought up 3 weeks ago already [1] but no proper fix has materialized, and I keep seeing the problem since 3.17-rc1. [1] https://lkml.org/lkml/2014/8/16/128 BUG: sleeping function called from invalid context at kernel/workqueue.c:2650 in_atomic(): 1, irqs_disabled(): 0, pid: 2335, name: wpa_supplicant 5 locks held by wpa_supplicant/2335: #0: (rtnl_mutex){+.+.+.}, at: [] rtnl_lock+0x12/0x20 #1: (&wdev->mtx){+.+.+.}, at: [] cfg80211_mgd_wext_siwessid+0x5c/0x180 [cfg80211] #2: (&local->mtx){+.+.+.}, at: [] ieee80211_prep_connection+0x17a/0x9a0 [mac80211] #3: (&local->chanctx_mtx){+.+.+.}, at: [] ieee80211_vif_use_channel+0x5d/0x2a0 [mac80211] #4: (&trig->leddev_list_lock){.+.+..}, at: [] tpt_trig_timer+0xec/0x170 [mac80211] CPU: 0 PID: 2335 Comm: wpa_supplicant Not tainted 3.17.0-rc3 #1 Hardware name: LENOVO 7470BN2/7470BN2, BIOS 6DET38WW (2.02 ) 12/19/2008 ffff8800360b5a50 ffff8800751f76d8 ffffffff8159e97f ffff8800360b5a30 ffff8800751f76e8 ffffffff810739a5 ffff8800751f77b0 ffffffff8106862f ffffffff810685d0 0aa2209200000000 ffff880000000004 ffff8800361c59d0 Call Trace: [] dump_stack+0x4d/0x66 [] __might_sleep+0xe5/0x120 [] flush_work+0x5f/0x270 [] ? mod_delayed_work_on+0x80/0x80 [] ? mark_held_locks+0x6a/0x90 [] ? __cancel_work_timer+0x6f/0x100 [] ? trace_hardirqs_on_caller+0xfd/0x1c0 [] __cancel_work_timer+0x7b/0x100 [] cancel_delayed_work_sync+0xe/0x10 [] led_blink_set+0x1b/0x40 [] tpt_trig_timer+0x110/0x170 [mac80211] [] ieee80211_mod_tpt_led_trig+0x9d/0x160 [mac80211] [] __ieee80211_recalc_idle+0x98/0x140 [mac80211] [] ieee80211_idle_off+0xe/0x10 [mac80211] [] ieee80211_add_chanctx+0x3b/0x220 [mac80211] [] ieee80211_new_chanctx+0x44/0xf0 [mac80211] [] ieee80211_vif_use_channel+0x1fa/0x2a0 [mac80211] [] ieee80211_prep_connection+0x188/0x9a0 [mac80211] [] ieee80211_mgd_auth+0x256/0x2e0 [mac80211] [] ieee80211_auth+0x13/0x20 [mac80211] [] cfg80211_mlme_auth+0x106/0x270 [cfg80211] [] cfg80211_conn_do_work+0x155/0x3b0 [cfg80211] [] cfg80211_connect+0x3f0/0x540 [cfg80211] [] cfg80211_mgd_wext_connect+0x158/0x1f0 [cfg80211] [] cfg80211_mgd_wext_siwessid+0xde/0x180 [cfg80211] [] ? cfg80211_wext_giwessid+0x50/0x50 [cfg80211] [] cfg80211_wext_siwessid+0x1d/0x40 [cfg80211] [] ioctl_standard_iw_point+0x14c/0x3e0 [] ? trace_hardirqs_on_caller+0xfd/0x1c0 [] ioctl_standard_call+0x8a/0xd0 [] ? ioctl_standard_iw_point+0x3e0/0x3e0 [] wireless_process_ioctl.constprop.10+0xb6/0x100 [] wext_handle_ioctl+0x5d/0xb0 [] dev_ioctl+0x329/0x620 [] ? trace_hardirqs_on_caller+0xfd/0x1c0 [] sock_ioctl+0x142/0x2e0 [] do_vfs_ioctl+0x300/0x520 [] ? sysret_check+0x1b/0x56 [] ? trace_hardirqs_on_caller+0xfd/0x1c0 [] SyS_ioctl+0x81/0xa0 [] system_call_fastpath+0x1a/0x1f wlan0: send auth to 00:0b:6b:3c:8c:e4 (try 1/3) wlan0: authenticated wlan0: associate with 00:0b:6b:3c:8c:e4 (try 1/3) wlan0: RX AssocResp from 00:0b:6b:3c:8c:e4 (capab=0x431 status=0 aid=2) wlan0: associated IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready cfg80211: Calling CRDA for country: NA wlan0: Limiting TX power to 27 (27 - 0) dBm as advertised by 00:0b:6b:3c:8c:e4 ================================= [ INFO: inconsistent lock state ] 3.17.0-rc3 #1 Not tainted --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes: ((&(&led_cdev->blink_work)->work)){+.?...}, at: [] flush_work+0x0/0x270 {SOFTIRQ-ON-W} state was registered at: [] __lock_acquire+0x30e/0x1a30 [] lock_acquire+0x91/0x110 [] flush_work+0x38/0x270 [] __cancel_work_timer+0x7b/0x100 [] cancel_delayed_work_sync+0xe/0x10 [] led_blink_set+0x1b/0x40 [] tpt_trig_timer+0x110/0x170 [mac80211] [] ieee80211_mod_tpt_led_trig+0x9d/0x160 [mac80211] [] __ieee80211_recalc_idle+0x98/0x140 [mac80211] [] ieee80211_idle_off+0xe/0x10 [mac80211] [] ieee80211_add_chanctx+0x3b/0x220 [mac80211] [] ieee80211_new_chanctx+0x44/0xf0 [mac80211] [] ieee80211_vif_use_channel+0x1fa/0x2a0 [mac80211] [] ieee80211_prep_connection+0x188/0x9a0 [mac80211] [] ieee80211_mgd_auth+0x256/0x2e0 [mac80211] [] ieee80211_auth+0x13/0x20 [mac80211] [] cfg80211_mlme_auth+0x106/0x270 [cfg80211] [] cfg80211_conn_do_work+0x155/0x3b0 [cfg80211] [] cfg80211_connect+0x3f0/0x540 [cfg80211] [] cfg80211_mgd_wext_connect+0x158/0x1f0 [cfg80211] [] cfg80211_mgd_wext_siwessid+0xde/0x180 [cfg80211] [] cfg80211_wext_siwessid+0x1d/0x40 [cfg80211] [] ioctl_standard_iw_point+0x14c/0x3e0 [] ioctl_standard_call+0x8a/0xd0 [] wireless_process_ioctl.constprop.10+0xb6/0x100 [] wext_handle_ioctl+0x5d/0xb0 [] dev_ioctl+0x329/0x620 [] sock_ioctl+0x142/0x2e0 [] do_vfs_ioctl+0x300/0x520 [] SyS_ioctl+0x81/0xa0 [] system_call_fastpath+0x1a/0x1f irq event stamp: 493416 hardirqs last enabled at (493416): [] __cancel_work_timer+0x6f/0x100 hardirqs last disabled at (493415): [] try_to_grab_pending+0x1f/0x160 softirqs last enabled at (493408): [] _local_bh_enable+0x1d/0x50 softirqs last disabled at (493409): [] irq_exit+0xa5/0xb0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock((&(&led_cdev->blink_work)->work)); lock((&(&led_cdev->blink_work)->work)); *** DEADLOCK *** 2 locks held by swapper/0/0: #0: (((&tpt_trig->timer))){+.-...}, at: [] call_timer_fn+0x0/0x180 #1: (&trig->leddev_list_lock){.+.?..}, at: [] tpt_trig_timer+0xec/0x170 [mac80211] stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.17.0-rc3 #1 Hardware name: LENOVO 7470BN2/7470BN2, BIOS 6DET38WW (2.02 ) 12/19/2008 ffffffff8246eb30 ffff88007c203b00 ffffffff8159e97f ffffffff81a194c0 ffff88007c203b50 ffffffff81599c29 0000000000000001 ffffffff00000001 ffff880000000000 0000000000000006 ffffffff81a194c0 ffffffff81093ad0 Call Trace: [] dump_stack+0x4d/0x66 [] print_usage_bug+0x1f4/0x205 [] ? check_usage_backwards+0x140/0x140 [] mark_lock+0x223/0x2b0 [] __lock_acquire+0x2b0/0x1a30 [] lock_acquire+0x91/0x110 [] ? mod_delayed_work_on+0x80/0x80 [] ? __ieee80211_get_rx_led_name+0x10/0x10 [mac80211] [] flush_work+0x38/0x270 [] ? mod_delayed_work_on+0x80/0x80 [] ? mark_held_locks+0x6a/0x90 [] ? __cancel_work_timer+0x6f/0x100 [] ? __ieee80211_get_rx_led_name+0x10/0x10 [mac80211] [] ? trace_hardirqs_on_caller+0xad/0x1c0 [] ? __ieee80211_get_rx_led_name+0x10/0x10 [mac80211] [] __cancel_work_timer+0x7b/0x100 [] cancel_delayed_work_sync+0xe/0x10 [] led_blink_set+0x1b/0x40 [] tpt_trig_timer+0x110/0x170 [mac80211] [] call_timer_fn+0x75/0x180 [] ? process_timeout+0x10/0x10 [] ? __ieee80211_get_rx_led_name+0x10/0x10 [mac80211] [] run_timer_softirq+0x1fc/0x2f0 [] __do_softirq+0x115/0x2e0 [] irq_exit+0xa5/0xb0 [] do_IRQ+0x53/0xf0 [] common_interrupt+0x6f/0x6f [] ? cpuidle_enter_state+0x6e/0x180 [] cpuidle_enter+0x12/0x20 [] cpu_startup_entry+0x330/0x360 [] rest_init+0xc1/0xd0 [] ? csum_partial_copy_generic+0x170/0x170 [] start_kernel+0x44f/0x45a [] ? set_init_arg+0x53/0x53 [] x86_64_start_reservations+0x2a/0x2c [] x86_64_start_kernel+0xf1/0xf4 Cc: Vincent Donnefort Cc: Hugh Dickins Cc: Tejun Heo Signed-off-by: Jiri Kosina Signed-off-by: Bryan Wu --- include/linux/leds.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/leds.h b/include/linux/leds.h index 6a599dce7f9d..e43686472197 100644 --- a/include/linux/leds.h +++ b/include/linux/leds.h @@ -15,6 +15,7 @@ #include #include #include +#include #include struct device; @@ -68,7 +69,7 @@ struct led_classdev { const char *default_trigger; /* Trigger to use */ unsigned long blink_delay_on, blink_delay_off; - struct delayed_work blink_work; + struct timer_list blink_timer; int blink_brightness; struct work_struct set_brightness_work; -- cgit v1.2.3 From d07e9c178f188f76851aca8ab49a78da13dda006 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 29 Aug 2014 15:13:21 +0200 Subject: PM / domains: Make generic_pm_domain.name const Signed-off-by: Geert Uytterhoeven Signed-off-by: Rafael J. Wysocki --- include/linux/pm_domain.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h index 7c1d252b20c0..ebc4c76ffb73 100644 --- a/include/linux/pm_domain.h +++ b/include/linux/pm_domain.h @@ -60,7 +60,7 @@ struct generic_pm_domain { struct mutex lock; struct dev_power_governor *gov; struct work_struct power_off_work; - char *name; + const char *name; unsigned int in_progress; /* Number of devices being suspended now */ atomic_t sd_count; /* Number of subdomains with power "on" */ enum gpd_status status; /* Current state of the domain */ -- cgit v1.2.3 From 40bea039593dfc7f3f9814dab844f6db43ae580b Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Wed, 13 Aug 2014 18:50:16 +0200 Subject: nohz: Restore NMI safe local irq work for local nohz kick The local nohz kick is currently used by perf which needs it to be NMI-safe. Recent commit though (7d1311b93e58ed55f3a31cc8f94c4b8fe988a2b9) changed its implementation to fire the local kick using the remote kick API. It was convenient to make the code more generic but the remote kick isn't NMI-safe. As a result: WARNING: CPU: 3 PID: 18062 at kernel/irq_work.c:72 irq_work_queue_on+0x11e/0x140() CPU: 3 PID: 18062 Comm: trinity-subchil Not tainted 3.16.0+ #34 0000000000000009 00000000903774d1 ffff880244e06c00 ffffffff9a7f1e37 0000000000000000 ffff880244e06c38 ffffffff9a0791dd ffff880244fce180 0000000000000003 ffff880244e06d58 ffff880244e06ef8 0000000000000000 Call Trace: [] dump_stack+0x4e/0x7a [] warn_slowpath_common+0x7d/0xa0 [] warn_slowpath_null+0x1a/0x20 [] irq_work_queue_on+0x11e/0x140 [] tick_nohz_full_kick_cpu+0x57/0x90 [] __perf_event_overflow+0x275/0x350 [] ? perf_event_task_disable+0xa0/0xa0 [] ? x86_perf_event_set_period+0xbf/0x150 [] perf_event_overflow+0x14/0x20 [] intel_pmu_handle_irq+0x206/0x410 [] ? arch_vtime_task_switch+0x63/0x130 [] perf_event_nmi_handler+0x2b/0x50 [] nmi_handle+0xd2/0x390 [] ? nmi_handle+0x5/0x390 [] ? lock_release+0xab/0x330 [] default_do_nmi+0x72/0x1c0 [] ? cpuacct_account_field+0xcf/0x200 [] do_nmi+0xb8/0x100 Lets fix this by restoring the use of local irq work for the nohz local kick. Reported-by: Catalin Iacob Reported-and-tested-by: Dave Jones Cc: Peter Zijlstra Cc: Thomas Gleixner Signed-off-by: Frederic Weisbecker --- include/linux/tick.h | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/tick.h b/include/linux/tick.h index 059052306831..9a82c7dc3fdd 100644 --- a/include/linux/tick.h +++ b/include/linux/tick.h @@ -183,13 +183,8 @@ static inline bool tick_nohz_full_cpu(int cpu) extern void tick_nohz_init(void); extern void __tick_nohz_full_check(void); +extern void tick_nohz_full_kick(void); extern void tick_nohz_full_kick_cpu(int cpu); - -static inline void tick_nohz_full_kick(void) -{ - tick_nohz_full_kick_cpu(smp_processor_id()); -} - extern void tick_nohz_full_kick_all(void); extern void __tick_nohz_task_switch(struct task_struct *tsk); #else -- cgit v1.2.3 From e793c0f70e9bdf4a2e71c151a1a3cf85c4db92ad Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Thu, 4 Sep 2014 23:44:36 +0900 Subject: net: treewide: Fix typo found in DocBook/networking.xml This patch fix spelling typo found in DocBook/networking.xml. It is because the neworking.xml is generated from comments in the source, I have to fix typo in comments within the source. Signed-off-by: Masanari Iida Acked-by: Randy Dunlap Signed-off-by: David S. Miller --- include/linux/netdevice.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 38377392d082..c8e388e5fccc 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -3176,7 +3176,7 @@ static inline int __dev_uc_sync(struct net_device *dev, } /** - * __dev_uc_unsync - Remove synchonized addresses from device + * __dev_uc_unsync - Remove synchronized addresses from device * @dev: device to sync * @unsync: function to call if address should be removed * @@ -3220,7 +3220,7 @@ static inline int __dev_mc_sync(struct net_device *dev, } /** - * __dev_mc_unsync - Remove synchonized addresses from device + * __dev_mc_unsync - Remove synchronized addresses from device * @dev: device to sync * @unsync: function to call if address should be removed * -- cgit v1.2.3 From b440bde74f043c8ec31081cb59c9a53ade954701 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 10 Sep 2014 13:45:01 -0600 Subject: PCI: Add pci_ignore_hotplug() to ignore hotplug events for a device Powering off a hot-pluggable device, e.g., with pci_set_power_state(D3cold), normally generates a hot-remove event that unbinds the driver. Some drivers expect to remain bound to a device even while they power it off and back on again. This can be dangerous, because if the device is removed or replaced while it is powered off, the driver doesn't know that anything changed. But some drivers accept that risk. Add pci_ignore_hotplug() for use by drivers that know their device cannot be removed. Using pci_ignore_hotplug() tells the PCI core that hot-plug events for the device should be ignored. The radeon and nouveau drivers use this to switch between a low-power, integrated GPU and a higher-power, higher-performance discrete GPU. They power off the unused GPU, but they want to remain bound to it. This is a reimplementation of f244d8b623da ("ACPIPHP / radeon / nouveau: Fix VGA switcheroo problem related to hotplug") but extends it to work with both acpiphp and pciehp. This fixes a problem where systems with dual GPUs using the radeon drivers become unusable, freezing every few seconds (see bugzillas below). The resume of the radeon device may also fail, e.g., This fixes problems on dual GPU systems where the radeon driver becomes unusable because of problems while suspending the device, as in bug 79701: [drm] radeon: finishing device. radeon 0000:01:00.0: Userspace still has active objects ! radeon 0000:01:00.0: ffff8800cb4ec288 ffff8800cb4ec000 16384 4294967297 force free ... WARNING: CPU: 0 PID: 67 at /home/apw/COD/linux/drivers/gpu/drm/radeon/radeon_gart.c:234 radeon_gart_unbind+0xd2/0xe0 [radeon]() trying to unbind memory from uninitialized GART ! or while resuming it, as in bug 77261: radeon 0000:01:00.0: ring 0 stalled for more than 10158msec radeon 0000:01:00.0: GPU lockup ... radeon 0000:01:00.0: GPU pci config reset pciehp 0000:00:01.0:pcie04: Card not present on Slot(1-1) radeon 0000:01:00.0: GPU reset succeeded, trying to resume *ERROR* radeon: dpm resume failed radeon 0000:01:00.0: Wait for MC idle timedout ! Link: https://bugzilla.kernel.org/show_bug.cgi?id=77261 Link: https://bugzilla.kernel.org/show_bug.cgi?id=79701 Reported-by: Shawn Starr Reported-by: Jose P. Signed-off-by: Bjorn Helgaas Acked-by: Alex Deucher Acked-by: Rajat Jain Acked-by: Rafael J. Wysocki Acked-by: Dave Airlie CC: stable@vger.kernel.org # v3.15+ --- include/linux/pci.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index 61978a460841..96453f9bc8ba 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -303,6 +303,7 @@ struct pci_dev { D3cold, not set for devices powered on/off by the corresponding bridge */ + unsigned int ignore_hotplug:1; /* Ignore hotplug events */ unsigned int d3_delay; /* D3->D0 transition time in ms */ unsigned int d3cold_delay; /* D3cold->D0 transition time in ms */ @@ -1021,6 +1022,11 @@ bool pci_dev_run_wake(struct pci_dev *dev); bool pci_check_pme_status(struct pci_dev *dev); void pci_pme_wakeup_bus(struct pci_bus *bus); +static inline void pci_ignore_hotplug(struct pci_dev *dev) +{ + dev->ignore_hotplug = 1; +} + static inline int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable) { -- cgit v1.2.3 From 09e05c3f78e9e82bda5958eb95bbf719f7a0ed6b Mon Sep 17 00:00:00 2001 From: Matan Barak Date: Wed, 10 Sep 2014 16:41:56 +0300 Subject: net/mlx4: Set vlan stripping policy by the right command Changing the vlan stripping policy of the QP isn't supported by older firmware versions for the INIT2RTR command. Nevertheless, we've used it. Fix that by doing this policy change using INIT2RTR only if the firmware supports it, otherwise, we call UPDATE_QP command to do the task. Fixes: 7677fc9 ('net/mlx4: Strengthen VLAN tags/priorities enforcement in VST mode') Signed-off-by: Matan Barak Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- include/linux/mlx4/device.h | 1 + include/linux/mlx4/qp.h | 12 ++++++++++-- 2 files changed, 11 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index 511c6e0d21a9..a5b7d7cfcedf 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -209,6 +209,7 @@ enum { MLX4_BMME_FLAG_TYPE_2_WIN = 1 << 9, MLX4_BMME_FLAG_RESERVED_LKEY = 1 << 10, MLX4_BMME_FLAG_FAST_REG_WR = 1 << 11, + MLX4_BMME_FLAG_VSD_INIT2RTR = 1 << 28, }; enum mlx4_event { diff --git a/include/linux/mlx4/qp.h b/include/linux/mlx4/qp.h index 7040dc98ff8b..5f4e36cf0091 100644 --- a/include/linux/mlx4/qp.h +++ b/include/linux/mlx4/qp.h @@ -56,7 +56,8 @@ enum mlx4_qp_optpar { MLX4_QP_OPTPAR_RNR_RETRY = 1 << 13, MLX4_QP_OPTPAR_ACK_TIMEOUT = 1 << 14, MLX4_QP_OPTPAR_SCHED_QUEUE = 1 << 16, - MLX4_QP_OPTPAR_COUNTER_INDEX = 1 << 20 + MLX4_QP_OPTPAR_COUNTER_INDEX = 1 << 20, + MLX4_QP_OPTPAR_VLAN_STRIPPING = 1 << 21, }; enum mlx4_qp_state { @@ -423,13 +424,20 @@ struct mlx4_wqe_inline_seg { enum mlx4_update_qp_attr { MLX4_UPDATE_QP_SMAC = 1 << 0, + MLX4_UPDATE_QP_VSD = 1 << 2, + MLX4_UPDATE_QP_SUPPORTED_ATTRS = (1 << 2) - 1 +}; + +enum mlx4_update_qp_params_flags { + MLX4_UPDATE_QP_PARAMS_FLAGS_VSD_ENABLE = 1 << 0, }; struct mlx4_update_qp_params { u8 smac_index; + u32 flags; }; -int mlx4_update_qp(struct mlx4_dev *dev, struct mlx4_qp *qp, +int mlx4_update_qp(struct mlx4_dev *dev, u32 qpn, enum mlx4_update_qp_attr attr, struct mlx4_update_qp_params *params); int mlx4_qp_modify(struct mlx4_dev *dev, struct mlx4_mtt *mtt, -- cgit v1.2.3 From e09c2c295468476a239d13324ce9042ec4de05eb Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 13 Sep 2014 04:14:30 +0900 Subject: workqueue: apply __WQ_ORDERED to create_singlethread_workqueue() create_singlethread_workqueue() is a compat interface for single threaded workqueue which maps to ordered workqueue w/ rescuer in the current implementation. create_singlethread_workqueue() currently implemented by invoking alloc_workqueue() w/ appropriate parameters. 8719dceae2f9 ("workqueue: reject adjusting max_active or applying attrs to ordered workqueues") introduced __WQ_ORDERED to protect ordered workqueues against dynamic attribute changes which can break ordering guarantees but forgot to apply it to create_singlethread_workqueue(). This in itself is okay as nobody currently uses dynamic attribute change on workqueues created with create_singlethread_workqueue(). However, 4c16bd327c ("workqueue: implement NUMA affinity for unbound workqueues") broke singlethreaded guarantee for ordered workqueues through allocating a separate pool_workqueue on each NUMA node by default. A later change 8a2b75384444 ("workqueue: fix ordered workqueues in NUMA setups") fixed it by allocating only one global pool_workqueue if __WQ_ORDERED is set. Combined, the __WQ_ORDERED omission in create_singlethread_workqueue() became critical breaking its single threadedness and ordering guarantee. Let's make create_singlethread_workqueue() wrap alloc_ordered_workqueue() instead so that it inherits __WQ_ORDERED and can implicitly track future ordered_workqueue changes. v2: I missed that __WQ_ORDERED now protects against pwq splitting across NUMA nodes and incorrectly described the patch as a nice-to-have fix to protect against future dynamic attribute usages. Oleg pointed out that this is actually a critical breakage due to 8a2b75384444 ("workqueue: fix ordered workqueues in NUMA setups"). Signed-off-by: Tejun Heo Reported-by: Mike Anderson Cc: Oleg Nesterov Cc: Gustavo Luiz Duarte Cc: Tomas Henzl Cc: stable@vger.kernel.org Fixes: 4c16bd327c ("workqueue: implement NUMA affinity for unbound workqueues") --- include/linux/workqueue.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h index a0cc2e95ed1b..b996e6cde6bb 100644 --- a/include/linux/workqueue.h +++ b/include/linux/workqueue.h @@ -419,7 +419,7 @@ __alloc_workqueue_key(const char *fmt, unsigned int flags, int max_active, alloc_workqueue("%s", WQ_FREEZABLE | WQ_UNBOUND | WQ_MEM_RECLAIM, \ 1, (name)) #define create_singlethread_workqueue(name) \ - alloc_workqueue("%s", WQ_UNBOUND | WQ_MEM_RECLAIM, 1, (name)) + alloc_ordered_workqueue("%s", WQ_MEM_RECLAIM, name) extern void destroy_workqueue(struct workqueue_struct *wq); -- cgit v1.2.3 From d78c9300c51d6ceed9f6d078d4e9366f259de28c Mon Sep 17 00:00:00 2001 From: Andrew Hunter Date: Thu, 4 Sep 2014 14:17:16 -0700 Subject: jiffies: Fix timeval conversion to jiffies timeval_to_jiffies tried to round a timeval up to an integral number of jiffies, but the logic for doing so was incorrect: intervals corresponding to exactly N jiffies would become N+1. This manifested itself particularly repeatedly stopping/starting an itimer: setitimer(ITIMER_PROF, &val, NULL); setitimer(ITIMER_PROF, NULL, &val); would add a full tick to val, _even if it was exactly representable in terms of jiffies_ (say, the result of a previous rounding.) Doing this repeatedly would cause unbounded growth in val. So fix the math. Here's what was wrong with the conversion: we essentially computed (eliding seconds) jiffies = usec * (NSEC_PER_USEC/TICK_NSEC) by using scaling arithmetic, which took the best approximation of NSEC_PER_USEC/TICK_NSEC with denominator of 2^USEC_JIFFIE_SC = x/(2^USEC_JIFFIE_SC), and computed: jiffies = (usec * x) >> USEC_JIFFIE_SC and rounded this calculation up in the intermediate form (since we can't necessarily exactly represent TICK_NSEC in usec.) But the scaling arithmetic is a (very slight) *over*approximation of the true value; that is, instead of dividing by (1 usec/ 1 jiffie), we effectively divided by (1 usec/1 jiffie)-epsilon (rounding down). This would normally be fine, but we want to round timeouts up, and we did so by adding 2^USEC_JIFFIE_SC - 1 before the shift; this would be fine if our division was exact, but dividing this by the slightly smaller factor was equivalent to adding just _over_ 1 to the final result (instead of just _under_ 1, as desired.) In particular, with HZ=1000, we consistently computed that 10000 usec was 11 jiffies; the same was true for any exact multiple of TICK_NSEC. We could possibly still round in the intermediate form, adding something less than 2^USEC_JIFFIE_SC - 1, but easier still is to convert usec->nsec, round in nanoseconds, and then convert using time*spec*_to_jiffies. This adds one constant multiplication, and is not observably slower in microbenchmarks on recent x86 hardware. Tested: the following program: int main() { struct itimerval zero = {{0, 0}, {0, 0}}; /* Initially set to 10 ms. */ struct itimerval initial = zero; initial.it_interval.tv_usec = 10000; setitimer(ITIMER_PROF, &initial, NULL); /* Save and restore several times. */ for (size_t i = 0; i < 10; ++i) { struct itimerval prev; setitimer(ITIMER_PROF, &zero, &prev); /* on old kernels, this goes up by TICK_USEC every iteration */ printf("previous value: %ld %ld %ld %ld\n", prev.it_interval.tv_sec, prev.it_interval.tv_usec, prev.it_value.tv_sec, prev.it_value.tv_usec); setitimer(ITIMER_PROF, &prev, NULL); } return 0; } Cc: stable@vger.kernel.org Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Paul Turner Cc: Richard Cochran Cc: Prarit Bhargava Reviewed-by: Paul Turner Reported-by: Aaron Jacobs Signed-off-by: Andrew Hunter [jstultz: Tweaked to apply to 3.17-rc] Signed-off-by: John Stultz --- include/linux/jiffies.h | 12 ------------ 1 file changed, 12 deletions(-) (limited to 'include/linux') diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h index 1f44466c1e9d..c367cbdf73ab 100644 --- a/include/linux/jiffies.h +++ b/include/linux/jiffies.h @@ -258,23 +258,11 @@ extern unsigned long preset_lpj; #define SEC_JIFFIE_SC (32 - SHIFT_HZ) #endif #define NSEC_JIFFIE_SC (SEC_JIFFIE_SC + 29) -#define USEC_JIFFIE_SC (SEC_JIFFIE_SC + 19) #define SEC_CONVERSION ((unsigned long)((((u64)NSEC_PER_SEC << SEC_JIFFIE_SC) +\ TICK_NSEC -1) / (u64)TICK_NSEC)) #define NSEC_CONVERSION ((unsigned long)((((u64)1 << NSEC_JIFFIE_SC) +\ TICK_NSEC -1) / (u64)TICK_NSEC)) -#define USEC_CONVERSION \ - ((unsigned long)((((u64)NSEC_PER_USEC << USEC_JIFFIE_SC) +\ - TICK_NSEC -1) / (u64)TICK_NSEC)) -/* - * USEC_ROUND is used in the timeval to jiffie conversion. See there - * for more details. It is the scaled resolution rounding value. Note - * that it is a 64-bit value. Since, when it is applied, we are already - * in jiffies (albit scaled), it is nothing but the bits we will shift - * off. - */ -#define USEC_ROUND (u64)(((u64)1 << USEC_JIFFIE_SC) - 1) /* * The maximum jiffie value is (MAX_INT >> 1). Here we translate that * into seconds. The 64-bit case will overflow if we are not careful, -- cgit v1.2.3 From 23d0db76ffa13ffb95229946e4648568c3c29db5 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 13 Sep 2014 11:24:03 -0700 Subject: Make hash_64() use a 64-bit multiply when appropriate The hash_64() function historically does the multiply by the GOLDEN_RATIO_PRIME_64 number with explicit shifts and adds, because unlike the 32-bit case, gcc seems unable to turn the constant multiply into the more appropriate shift and adds when required. However, that means that we generate those shifts and adds even when the architecture has a fast multiplier, and could just do it better in hardware. Use the now-cleaned-up CONFIG_ARCH_HAS_FAST_MULTIPLIER (together with "is it a 64-bit architecture") to decide whether to use an integer multiply or the explicit sequence of shift/add instructions. Signed-off-by: Linus Torvalds --- include/linux/hash.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/hash.h b/include/linux/hash.h index bd1754c7ecef..d0494c399392 100644 --- a/include/linux/hash.h +++ b/include/linux/hash.h @@ -37,6 +37,9 @@ static __always_inline u64 hash_64(u64 val, unsigned int bits) { u64 hash = val; +#if defined(CONFIG_ARCH_HAS_FAST_MULTIPLIER) && BITS_PER_LONG == 64 + hash = hash * GOLDEN_RATIO_PRIME_64; +#else /* Sigh, gcc can't optimise this alone like it does for 32 bits. */ u64 n = hash; n <<= 18; @@ -51,6 +54,7 @@ static __always_inline u64 hash_64(u64 val, unsigned int bits) hash += n; n <<= 2; hash += n; +#endif /* High bits are more random, so use them. */ return hash >> (64 - bits); -- cgit v1.2.3 From 9226b5b440f2b4fbb3b797f3cb74a9a627220660 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 14 Sep 2014 17:28:32 -0700 Subject: vfs: avoid non-forwarding large load after small store in path lookup The performance regression that Josef Bacik reported in the pathname lookup (see commit 99d263d4c5b2 "vfs: fix bad hashing of dentries") made me look at performance stability of the dcache code, just to verify that the problem was actually fixed. That turned up a few other problems in this area. There are a few cases where we exit RCU lookup mode and go to the slow serializing case when we shouldn't, Al has fixed those and they'll come in with the next VFS pull. But my performance verification also shows that link_path_walk() turns out to have a very unfortunate 32-bit store of the length and hash of the name we look up, followed by a 64-bit read of the combined hash_len field. That screws up the processor store to load forwarding, causing an unnecessary hickup in this critical routine. It's caused by the ugly calling convention for the "hash_name()" function, and easily fixed by just making hash_name() fill in the whole 'struct qstr' rather than passing it a pointer to just the hash value. With that, the profile for this function looks much smoother. Signed-off-by: Linus Torvalds --- include/linux/dcache.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/dcache.h b/include/linux/dcache.h index e4ae2ad48d07..75a227cc7ce2 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -55,6 +55,7 @@ struct qstr { #define QSTR_INIT(n,l) { { { .len = l } }, .name = n } #define hashlen_hash(hashlen) ((u32) (hashlen)) #define hashlen_len(hashlen) ((u32)((hashlen) >> 32)) +#define hashlen_create(hash,len) (((u64)(len)<<32)|(u32)(hash)) struct dentry_stat_t { long nr_dentry; -- cgit v1.2.3 From ce6eacb07e287c0c3c8b5c316a9a7f9cecf69e95 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bruno=20Pr=C3=A9mont?= Date: Sun, 24 Aug 2014 23:13:15 +0200 Subject: vgaarb: Drop obsolete #ifndef MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 20cde694027e ("x86, ia64: Move EFI_FB vga_default_device() initialization to pci_vga_fixup()") moved boot video device detection from efifb to x86 and ia64 pci/fixup.c. Remove the left-over #ifndef check that will always match since the corresponding arch-specific define is gone with above patch. Signed-off-by: Bruno Prémont Signed-off-by: Bjorn Helgaas CC: Matthew Garrett --- include/linux/vgaarb.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/vgaarb.h b/include/linux/vgaarb.h index 2c02f3a8d2ba..c37bd4d06739 100644 --- a/include/linux/vgaarb.h +++ b/include/linux/vgaarb.h @@ -182,7 +182,6 @@ extern void vga_put(struct pci_dev *pdev, unsigned int rsrc); * vga_get()... */ -#ifndef __ARCH_HAS_VGA_DEFAULT_DEVICE #ifdef CONFIG_VGA_ARB extern struct pci_dev *vga_default_device(void); extern void vga_set_default_device(struct pci_dev *pdev); @@ -190,7 +189,6 @@ extern void vga_set_default_device(struct pci_dev *pdev); static inline struct pci_dev *vga_default_device(void) { return NULL; }; static inline void vga_set_default_device(struct pci_dev *pdev) { }; #endif -#endif /** * vga_conflicts -- cgit v1.2.3 From 766a53d059d1500c9755c8af017bd411bd8f1b20 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 12 Sep 2014 17:51:29 -0400 Subject: vgaswitcheroo: add vga_switcheroo_fini_domain_pm_ops MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Drivers should call this on unload to unregister pmops. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=84431 Reviewed-by: Ben Skeggs Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Pali Rohár Cc: Ben Skeggs --- include/linux/vga_switcheroo.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/vga_switcheroo.h b/include/linux/vga_switcheroo.h index 502073a53dd3..b483abd34493 100644 --- a/include/linux/vga_switcheroo.h +++ b/include/linux/vga_switcheroo.h @@ -64,6 +64,7 @@ int vga_switcheroo_get_client_state(struct pci_dev *dev); void vga_switcheroo_set_dynamic_switch(struct pci_dev *pdev, enum vga_switcheroo_state dynamic); int vga_switcheroo_init_domain_pm_ops(struct device *dev, struct dev_pm_domain *domain); +void vga_switcheroo_fini_domain_pm_ops(struct device *dev); int vga_switcheroo_init_domain_pm_optimus_hdmi_audio(struct device *dev, struct dev_pm_domain *domain); #else @@ -82,6 +83,7 @@ static inline int vga_switcheroo_get_client_state(struct pci_dev *dev) { return static inline void vga_switcheroo_set_dynamic_switch(struct pci_dev *pdev, enum vga_switcheroo_state dynamic) {} static inline int vga_switcheroo_init_domain_pm_ops(struct device *dev, struct dev_pm_domain *domain) { return -EINVAL; } +static inline void vga_switcheroo_fini_domain_pm_ops(struct device *dev) {} static inline int vga_switcheroo_init_domain_pm_optimus_hdmi_audio(struct device *dev, struct dev_pm_domain *domain) { return -EINVAL; } #endif -- cgit v1.2.3 From 0a30288da1aec914e158c2d7a3482a85f632750f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 23 Sep 2014 15:24:32 -0400 Subject: blk-mq, percpu_ref: implement a kludge for SCSI blk-mq stall during probe blk-mq uses percpu_ref for its usage counter which tracks the number of in-flight commands and used to synchronously drain the queue on freeze. percpu_ref shutdown takes measureable wallclock time as it involves a sched RCU grace period. This means that draining a blk-mq takes measureable wallclock time. One would think that this shouldn't matter as queue shutdown should be a rare event which takes place asynchronously w.r.t. userland. Unfortunately, SCSI probing involves synchronously setting up and then tearing down a lot of request_queues back-to-back for non-existent LUNs. This means that SCSI probing may take more than ten seconds when scsi-mq is used. This will be properly fixed by implementing a mechanism to keep q->mq_usage_counter in atomic mode till genhd registration; however, that involves rather big updates to percpu_ref which is difficult to apply late in the devel cycle (v3.17-rc6 at the moment). As a stop-gap measure till the proper fix can be implemented in the next cycle, this patch introduces __percpu_ref_kill_expedited() and makes blk_mq_freeze_queue() use it. This is heavy-handed but should work for testing the experimental SCSI blk-mq implementation. Signed-off-by: Tejun Heo Reported-by: Christoph Hellwig Link: http://lkml.kernel.org/g/20140919113815.GA10791@lst.de Fixes: add703fda981 ("blk-mq: use percpu_ref for mq usage count") Cc: Kent Overstreet Cc: Jens Axboe Tested-by: Christoph Hellwig Signed-off-by: Jens Axboe --- include/linux/percpu-refcount.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/percpu-refcount.h b/include/linux/percpu-refcount.h index 3dfbf237cd8f..ef5894ca8e50 100644 --- a/include/linux/percpu-refcount.h +++ b/include/linux/percpu-refcount.h @@ -71,6 +71,7 @@ void percpu_ref_reinit(struct percpu_ref *ref); void percpu_ref_exit(struct percpu_ref *ref); void percpu_ref_kill_and_confirm(struct percpu_ref *ref, percpu_ref_func_t *confirm_kill); +void __percpu_ref_kill_expedited(struct percpu_ref *ref); /** * percpu_ref_kill - drop the initial ref -- cgit v1.2.3