From 1c1452be2e9ae282a7316c3b23987811bd7acda6 Mon Sep 17 00:00:00 2001 From: Jonas Larsson Date: Tue, 31 Mar 2009 11:16:48 +0200 Subject: atmel-mci: Add support for inverted detect pin Same patch as before, modified to use bool. Also adds description of the new field in struct atmel_mci that I missed in the first patch. This patch adds Atmel MCI support for inverted detect pins. Signed-off-by: Jonas Larsson Acked-by: Pierre Ossman Signed-off-by: Haavard Skinnemoen --- include/linux/atmel-mci.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/atmel-mci.h b/include/linux/atmel-mci.h index 2f1f95737acb..57b1846a3c87 100644 --- a/include/linux/atmel-mci.h +++ b/include/linux/atmel-mci.h @@ -10,6 +10,7 @@ * @bus_width: Number of data lines wired up the slot * @detect_pin: GPIO pin wired to the card detect switch * @wp_pin: GPIO pin wired to the write protect sensor + * @detect_is_active_high: The state of the detect pin when it is active * * If a given slot is not present on the board, @bus_width should be * set to 0. The other fields are ignored in this case. @@ -24,6 +25,7 @@ struct mci_slot_pdata { unsigned int bus_width; int detect_pin; int wp_pin; + bool detect_is_active_high; }; /** -- cgit v1.2.3 From 02bec490450836ebbd628e97ec03f10b57def8ce Mon Sep 17 00:00:00 2001 From: Tim Blechmann Date: Tue, 24 Mar 2009 12:24:35 +0100 Subject: ALSA: lx6464es - driver for the digigram lx6464es interface prototype of a driver for the digigram lx6464es 64 channel ethersound interface. Signed-off-by: Tim Blechmann Signed-off-by: Takashi Iwai --- include/linux/pci_ids.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index ee98cd570885..2b1a69598e74 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1005,6 +1005,7 @@ #define PCI_DEVICE_ID_PLX_PCI200SYN 0x3196 #define PCI_DEVICE_ID_PLX_9030 0x9030 #define PCI_DEVICE_ID_PLX_9050 0x9050 +#define PCI_DEVICE_ID_PLX_9056 0x9056 #define PCI_DEVICE_ID_PLX_9080 0x9080 #define PCI_DEVICE_ID_PLX_GTEK_SERIAL2 0xa001 @@ -1847,6 +1848,10 @@ #define PCI_SUBDEVICE_ID_HYPERCOPE_METRO 0x0107 #define PCI_SUBDEVICE_ID_HYPERCOPE_CHAMP2 0x0108 +#define PCI_VENDOR_ID_DIGIGRAM 0x1369 +#define PCI_SUBDEVICE_ID_DIGIGRAM_LX6464ES_SERIAL_SUBSYSTEM 0xc001 +#define PCI_SUBDEVICE_ID_DIGIGRAM_LX6464ES_CAE_SERIAL_SUBSYSTEM 0xc002 + #define PCI_VENDOR_ID_KAWASAKI 0x136b #define PCI_DEVICE_ID_MCHIP_KL5A72002 0xff01 -- cgit v1.2.3 From 76620aafd66f0004829764940c5466144969cffc Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Thu, 16 Apr 2009 02:02:07 -0700 Subject: gro: New frags interface to avoid copying shinfo It turns out that copying a 16-byte area at ~800k times a second can be really expensive :) This patch redesigns the frags GRO interface to avoid copying that area twice. The two disciples of the frags interface have been converted. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- include/linux/if_vlan.h | 6 ++---- include/linux/netdevice.h | 22 ++++++++++------------ 2 files changed, 12 insertions(+), 16 deletions(-) (limited to 'include/linux') diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h index e1ff5b14310e..7ff9af1d0f05 100644 --- a/include/linux/if_vlan.h +++ b/include/linux/if_vlan.h @@ -118,8 +118,7 @@ extern int vlan_hwaccel_do_receive(struct sk_buff *skb); extern int vlan_gro_receive(struct napi_struct *napi, struct vlan_group *grp, unsigned int vlan_tci, struct sk_buff *skb); extern int vlan_gro_frags(struct napi_struct *napi, struct vlan_group *grp, - unsigned int vlan_tci, - struct napi_gro_fraginfo *info); + unsigned int vlan_tci); #else static inline struct net_device *vlan_dev_real_dev(const struct net_device *dev) @@ -154,8 +153,7 @@ static inline int vlan_gro_receive(struct napi_struct *napi, } static inline int vlan_gro_frags(struct napi_struct *napi, - struct vlan_group *grp, unsigned int vlan_tci, - struct napi_gro_fraginfo *info) + struct vlan_group *grp, unsigned int vlan_tci) { return NET_RX_DROP; } diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 2e7783f4a755..54db3ebf2193 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1047,14 +1047,6 @@ struct packet_type { struct list_head list; }; -struct napi_gro_fraginfo { - skb_frag_t frags[MAX_SKB_FRAGS]; - unsigned int nr_frags; - unsigned int ip_summed; - unsigned int len; - __wsum csum; -}; - #include #include @@ -1442,12 +1434,18 @@ extern int napi_gro_receive(struct napi_struct *napi, struct sk_buff *skb); extern void napi_reuse_skb(struct napi_struct *napi, struct sk_buff *skb); -extern struct sk_buff * napi_fraginfo_skb(struct napi_struct *napi, - struct napi_gro_fraginfo *info); +extern struct sk_buff * napi_get_frags(struct napi_struct *napi); extern int napi_frags_finish(struct napi_struct *napi, struct sk_buff *skb, int ret); -extern int napi_gro_frags(struct napi_struct *napi, - struct napi_gro_fraginfo *info); +extern struct sk_buff * napi_frags_skb(struct napi_struct *napi); +extern int napi_gro_frags(struct napi_struct *napi); + +static inline void napi_free_frags(struct napi_struct *napi) +{ + kfree_skb(napi->skb); + napi->skb = NULL; +} + extern void netif_nit_deliver(struct sk_buff *skb); extern int dev_valid_name(const char *name); extern int dev_ioctl(struct net *net, unsigned int cmd, void __user *); -- cgit v1.2.3 From a0f82f64e26929776c58a5c93c2ecb38e3d82815 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Sun, 19 Apr 2009 09:43:48 +0000 Subject: syncookies: remove last_synq_overflow from struct tcp_sock last_synq_overflow eats 4 or 8 bytes in struct tcp_sock, even though it is only used when a listening sockets syn queue is full. We can (ab)use rx_opt.ts_recent_stamp to store the same information; it is not used otherwise as long as a socket is in listen state. Move linger2 around to avoid splitting struct mtu_probe across cacheline boundary on 32 bit arches. Signed-off-by: Florian Westphal Signed-off-by: David S. Miller --- include/linux/tcp.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 9d5078bd23a3..8afac76cd748 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -377,7 +377,7 @@ struct tcp_sock { unsigned int keepalive_time; /* time before keep alive takes place */ unsigned int keepalive_intvl; /* time interval between keep alive probes */ - unsigned long last_synq_overflow; + int linger2; /* Receiver side RTT estimation */ struct { @@ -406,8 +406,6 @@ struct tcp_sock { /* TCP MD5 Signagure Option information */ struct tcp_md5sig_info *md5sig_info; #endif - - int linger2; }; static inline struct tcp_sock *tcp_sk(const struct sock *sk) -- cgit v1.2.3 From 03ad032bb78b2732b607ed198e951240e1d21e59 Mon Sep 17 00:00:00 2001 From: Peter Holik Date: Sat, 18 Apr 2009 07:24:17 +0000 Subject: export usbnet_get_ethernet_addr from usbnet and fixed cdc_ether.c because of using the same function get_ethernet_addr as cdc_ether.c i export usbnet_get_ethernet_addr from usbnet and fixed cdc_ether (suggested by Oliver Neukum). Signed-off-by: Peter Holik Signed-off-by: David S. Miller --- include/linux/usb/usbnet.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index 36fabb95c7d3..5d44059f6d63 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -183,6 +183,7 @@ extern void usbnet_tx_timeout (struct net_device *net); extern int usbnet_change_mtu (struct net_device *net, int new_mtu); extern int usbnet_get_endpoints(struct usbnet *, struct usb_interface *); +extern int usbnet_get_ethernet_addr(struct usbnet *, int); extern void usbnet_defer_kevent (struct usbnet *, int); extern void usbnet_skb_return (struct usbnet *, struct sk_buff *); extern void usbnet_unlink_rx_urbs(struct usbnet *); -- cgit v1.2.3 From b1b67dd45a6b629eb41553856805aaa1614fbb83 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Mon, 20 Apr 2009 04:49:28 +0000 Subject: net: factor out ethtool invocation of vlan/macvlan drivers Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/linux/netdevice.h | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 54db3ebf2193..31167451d08d 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -42,6 +42,7 @@ #include #include +#include #include #include #ifdef CONFIG_DCB @@ -49,7 +50,6 @@ #endif struct vlan_group; -struct ethtool_ops; struct netpoll_info; /* 802.11 specific */ struct wireless_dev; @@ -1906,6 +1906,28 @@ static inline int skb_bond_should_drop(struct sk_buff *skb) } extern struct pernet_operations __net_initdata loopback_net_ops; + +static inline int dev_ethtool_get_settings(struct net_device *dev, + struct ethtool_cmd *cmd) +{ + if (!dev->ethtool_ops || !dev->ethtool_ops->get_settings) + return -EOPNOTSUPP; + return dev->ethtool_ops->get_settings(dev, cmd); +} + +static inline u32 dev_ethtool_get_rx_csum(struct net_device *dev) +{ + if (!dev->ethtool_ops || !dev->ethtool_ops->get_rx_csum) + return 0; + return dev->ethtool_ops->get_rx_csum(dev); +} + +static inline u32 dev_ethtool_get_flags(struct net_device *dev) +{ + if (!dev->ethtool_ops || !dev->ethtool_ops->get_flags) + return 0; + return dev->ethtool_ops->get_flags(dev); +} #endif /* __KERNEL__ */ #endif /* _LINUX_DEV_H */ -- cgit v1.2.3 From 0a1ec07a67bd8b0033dace237249654d015efa21 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Mon, 20 Apr 2009 01:25:46 +0000 Subject: net: skb_copy_datagram_const_iovec() There's an skb_copy_datagram_iovec() to copy out of a paged skb, but it modifies the iovec, and does not support starting at an offset in the destination. We want both in tun.c, so let's add the function. It's a carbon copy of skb_copy_datagram_iovec() with enough changes to be annoying. Signed-off-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- include/linux/skbuff.h | 5 +++++ include/linux/socket.h | 2 ++ 2 files changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 5fd389162f01..af2b21bdda83 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -1717,6 +1717,11 @@ extern int skb_copy_datagram_from_iovec(struct sk_buff *skb, int offset, struct iovec *from, int len); +extern int skb_copy_datagram_const_iovec(const struct sk_buff *from, + int offset, + const struct iovec *to, + int to_offset, + int size); extern void skb_free_datagram(struct sock *sk, struct sk_buff *skb); extern int skb_kill_datagram(struct sock *sk, struct sk_buff *skb, unsigned int flags); diff --git a/include/linux/socket.h b/include/linux/socket.h index 421afb4d29b0..171b08db9c4f 100644 --- a/include/linux/socket.h +++ b/include/linux/socket.h @@ -318,6 +318,8 @@ extern int csum_partial_copy_fromiovecend(unsigned char *kdata, extern int verify_iovec(struct msghdr *m, struct iovec *iov, struct sockaddr *address, int mode); extern int memcpy_toiovec(struct iovec *v, unsigned char *kdata, int len); +extern int memcpy_toiovecend(const struct iovec *v, unsigned char *kdata, + int offset, int len); extern int move_addr_to_user(struct sockaddr *kaddr, int klen, void __user *uaddr, int __user *ulen); extern int move_addr_to_kernel(void __user *uaddr, int ulen, struct sockaddr *kaddr); extern int put_cmsg(struct msghdr*, int level, int type, int len, void *data); -- cgit v1.2.3 From 6f26c9a7555e5bcca3560919db9b852015077dae Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Mon, 20 Apr 2009 01:26:11 +0000 Subject: tun: fix tun_chr_aio_write so that aio works aio_write gets const struct iovec * but tun_chr_aio_write casts this to struct iovec * and modifies the iovec. As a result, attempts to use io_submit to send packets to a tun device fail with weird errors such as EINVAL. Since tun is the only user of skb_copy_datagram_from_iovec, we can fix this simply by changing the later so that it does not touch the iovec passed to it. Signed-off-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- include/linux/skbuff.h | 3 ++- include/linux/socket.h | 4 ++-- 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index af2b21bdda83..1b5c3d298f43 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -1715,7 +1715,8 @@ extern int skb_copy_and_csum_datagram_iovec(struct sk_buff *skb, struct iovec *iov); extern int skb_copy_datagram_from_iovec(struct sk_buff *skb, int offset, - struct iovec *from, + const struct iovec *from, + int from_offset, int len); extern int skb_copy_datagram_const_iovec(const struct sk_buff *from, int offset, diff --git a/include/linux/socket.h b/include/linux/socket.h index 171b08db9c4f..42a0396f2c59 100644 --- a/include/linux/socket.h +++ b/include/linux/socket.h @@ -309,8 +309,8 @@ struct ucred { #ifdef __KERNEL__ extern int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len); -extern int memcpy_fromiovecend(unsigned char *kdata, struct iovec *iov, - int offset, int len); +extern int memcpy_fromiovecend(unsigned char *kdata, const struct iovec *iov, + int offset, int len); extern int csum_partial_copy_fromiovecend(unsigned char *kdata, struct iovec *iov, int offset, -- cgit v1.2.3 From c1c6b14b22af0f85d05a70405dc3fba5de840c7b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 30 Mar 2009 11:32:46 +0200 Subject: rfkill: remove deprecated state constants I only did superficial review, but these constants are stupid to have and without proper warnings nobody will review the code anyway, no amount of shouting will help. Also fix wimax to use correct states. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/rfkill.h | 8 -------- 1 file changed, 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index 164332cbb77c..e1ec7d9aa49c 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -52,14 +52,6 @@ enum rfkill_state { RFKILL_STATE_MAX, /* marker for last valid state */ }; -/* - * These are DEPRECATED, drivers using them should be verified to - * comply with the rfkill usage guidelines in Documentation/rfkill.txt - * and then converted to use the new names for rfkill_state - */ -#define RFKILL_STATE_OFF RFKILL_STATE_SOFT_BLOCKED -#define RFKILL_STATE_ON RFKILL_STATE_UNBLOCKED - /** * struct rfkill - rfkill control structure. * @name: Name of the switch. -- cgit v1.2.3 From 621cac85297de5ba655e3430b007dd2e0da91da6 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 27 Mar 2009 14:14:31 +0100 Subject: rfkill: remove user_claim stuff Almost all drivers do not support user_claim, so remove it completely and always report -EOPNOTSUPP to userspace. Since userspace cannot really drive rfkill _anyway_ (due to the odd restrictions imposed by the documentation) having this code is just pointless. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/rfkill.h | 6 ------ 1 file changed, 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index e1ec7d9aa49c..de18ef227e00 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -58,9 +58,6 @@ enum rfkill_state { * @type: Radio type which the button controls, the value stored * here should be a value from enum rfkill_type. * @state: State of the switch, "UNBLOCKED" means radio can operate. - * @user_claim_unsupported: Whether the hardware supports exclusive - * RF-kill control by userspace. Set this before registering. - * @user_claim: Set when the switch is controlled exlusively by userspace. * @mutex: Guards switch state transitions. It serializes callbacks * and also protects the state. * @data: Pointer to the RF button drivers private data which will be @@ -83,9 +80,6 @@ struct rfkill { const char *name; enum rfkill_type type; - bool user_claim_unsupported; - bool user_claim; - /* the mutex serializes callbacks and also protects * the state */ struct mutex mutex; -- cgit v1.2.3 From a3b8b0569fbef725597f05278ec58083321f6e9d Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Fri, 27 Mar 2009 21:59:49 +0200 Subject: nl80211: Add Michael MIC failure event Define a new nl80211 event, NL80211_CMD_MICHAEL_MIC_FAILURE, to be used to notify user space about locally detected Michael MIC failures. This matches with the MLME-MICHAELMICFAILURE.indication() primitive. Since we do not actually have TSC in the skb anymore when mac80211_ev_michael_mic_failure() is called, that function is changed to take in the TSC as an optional parameter instead of as a requirement to include the TSC after the hdr field (which we did not really follow). For now, TSC is not included in the events from mac80211, but it could be added at some point. Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- include/linux/nl80211.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index cbe8ce3bf486..27f230f063b3 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -199,6 +199,14 @@ * NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to * MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives). * + * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael + * MIC (part of TKIP) failure; sent on the "mlme" multicast group; the + * event includes %NL80211_ATTR_MAC to describe the source MAC address of + * the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key + * type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and + * %NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this + * event matches with MLME-MICHAELMICFAILURE.indication() primitive + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -260,6 +268,8 @@ enum nl80211_commands { NL80211_CMD_DEAUTHENTICATE, NL80211_CMD_DISASSOCIATE, + NL80211_CMD_MICHAEL_MIC_FAILURE, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -408,6 +418,9 @@ enum nl80211_commands { * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and * %NL80211_CMD_DISASSOCIATE, u16 * + * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as + * a u32 + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -492,6 +505,8 @@ enum nl80211_attrs { NL80211_ATTR_AUTH_TYPE, NL80211_ATTR_REASON_CODE, + NL80211_ATTR_KEY_TYPE, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -1062,4 +1077,17 @@ enum nl80211_auth_type { NL80211_AUTHTYPE_FT, NL80211_AUTHTYPE_NETWORK_EAP, }; + +/** + * enum nl80211_key_type - Key Type + * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key + * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key + * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS) + */ +enum nl80211_key_type { + NL80211_KEYTYPE_GROUP, + NL80211_KEYTYPE_PAIRWISE, + NL80211_KEYTYPE_PEERKEY, +}; + #endif /* __LINUX_NL80211_H */ -- cgit v1.2.3 From 18a8365992a8041aa178ae9ad5f0d951d0457230 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 31 Mar 2009 12:12:05 +0200 Subject: cfg80211: introduce scan IE limit attribute This patch introduces a new attribute for a wiphy that tells userspace how long the information elements added to a probe request frame can be at most. It also updates the at76 to advertise that it cannot support that, and, for now until I can fix that, iwlwifi too. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 27f230f063b3..209cacee5285 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -390,6 +390,8 @@ enum nl80211_commands { * * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with * a single scan request, a wiphy attribute. + * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements + * that can be added to a scan request * * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz) * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive @@ -507,6 +509,8 @@ enum nl80211_attrs { NL80211_ATTR_KEY_TYPE, + NL80211_ATTR_MAX_SCAN_IE_LEN, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.3 From 6bad8766620a3c8b64afa981502fdb543e3cfd6c Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 2 Apr 2009 14:08:09 -0400 Subject: cfg80211: send regulatory beacon hint events to userspace This informs userspace when a change has occured on a world roaming wiphy's channel which has lifted some restrictions due to a regulatory beacon hint. Because this is now sent to userspace through the regulatory multicast group we remove the debug prints we used to use as they are no longer necessary. Acked-by: Johannes Berg Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- include/linux/nl80211.h | 34 +++++++++++++++++++++++++++++++++- 1 file changed, 33 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 209cacee5285..05ba3539b77e 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -7,7 +7,7 @@ * Copyright 2008 Michael Wu * Copyright 2008 Luis Carlos Cobo * Copyright 2008 Michael Buesch - * Copyright 2008 Luis R. Rodriguez + * Copyright 2008, 2009 Luis R. Rodriguez * Copyright 2008 Jouni Malinen * Copyright 2008 Colin McCabe * @@ -166,6 +166,22 @@ * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on * to (%NL80211_ATTR_REG_ALPHA2). + * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon + * has been found while world roaming thus enabling active scan or + * any mode of operation that initiates TX (beacons) on a channel + * where we would not have been able to do either before. As an example + * if you are world roaming (regulatory domain set to world or if your + * driver is using a custom world roaming regulatory domain) and while + * doing a passive scan on the 5 GHz band you find an AP there (if not + * on a DFS channel) you will now be able to actively scan for that AP + * or use AP mode on your card on that same channel. Note that this will + * never be used for channels 1-11 on the 2 GHz band as they are always + * enabled world wide. This beacon hint is only sent if your device had + * either disabled active scanning or beaconing on a channel. We send to + * userspace the wiphy on which we removed a restriction from + * (%NL80211_ATTR_WIPHY) and the channel on which this occurred + * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER) + * the beacon hint was processed. * * @NL80211_CMD_AUTHENTICATE: authentication request and notification. * This command is used both as a command (request to authenticate) and @@ -270,6 +286,8 @@ enum nl80211_commands { NL80211_CMD_MICHAEL_MIC_FAILURE, + NL80211_CMD_REG_BEACON_HINT, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -288,6 +306,7 @@ enum nl80211_commands { #define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE #define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE #define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE +#define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT /** * enum nl80211_attrs - nl80211 netlink attributes @@ -423,6 +442,17 @@ enum nl80211_commands { * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as * a u32 * + * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change + * due to considerations from a beacon hint. This attribute reflects + * the state of the channel _before_ the beacon hint processing. This + * attributes consists of a nested attribute containing + * NL80211_FREQUENCY_ATTR_* + * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change + * due to considerations from a beacon hint. This attribute reflects + * the state of the channel _after_ the beacon hint processing. This + * attributes consists of a nested attribute containing + * NL80211_FREQUENCY_ATTR_* + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -511,6 +541,8 @@ enum nl80211_attrs { NL80211_ATTR_MAX_SCAN_IE_LEN, + NL80211_ATTR_FREQ_BEFORE, + NL80211_ATTR_FREQ_AFTER, /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.3 From 25e47c18ac4d8ad09c2ed4b99c1dbbcb7e3d2c51 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 2 Apr 2009 20:14:06 +0200 Subject: cfg80211: add cipher capabilities This adds the necessary code and fields to let drivers specify their cipher capabilities and exports them to userspace. Also update mac80211 to export the ciphers it has. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 05ba3539b77e..c01423888db9 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -453,6 +453,9 @@ enum nl80211_commands { * attributes consists of a nested attribute containing * NL80211_FREQUENCY_ATTR_* * + * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported + * cipher suites + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -540,6 +543,7 @@ enum nl80211_attrs { NL80211_ATTR_KEY_TYPE, NL80211_ATTR_MAX_SCAN_IE_LEN, + NL80211_ATTR_CIPHER_SUITES, NL80211_ATTR_FREQ_BEFORE, NL80211_ATTR_FREQ_AFTER, -- cgit v1.2.3 From 6a362bb1c9f900f7e6daeee52ff2d538badae49b Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Sun, 5 Apr 2009 11:01:20 -0400 Subject: ath5k: add support for Fukato Datacask Jupiter LEDs This adds support for the LEDs on the Jupiter netbook. Reported-by: Martin Bammer Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- include/linux/pci_ids.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index ee98cd570885..ea061e290d02 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2313,6 +2313,8 @@ #define PCI_VENDOR_ID_QMI 0x1a32 +#define PCI_VENDOR_ID_AZWAVE 0x1a3b + #define PCI_VENDOR_ID_TEKRAM 0x1de1 #define PCI_DEVICE_ID_TEKRAM_DC290 0xdc29 -- cgit v1.2.3 From e45d8e534b67580eedd9b4910ccc16d6dd3cceff Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Mon, 6 Apr 2009 15:50:56 -0700 Subject: libertas: add support for Marvell SD8688 chip libertas: add support for Marvell SD8688 chip Use RxPD->pkt_ptr to locate eth803 header in the packet received since SD8688/v10 firmware allows a gap between RxPD and eth803 header. Set SDIO block size to 256 for CMD53. The maximum block size for SD8688 WLAN function is set to 512 in TPLFE_MAX_BLK_SIZE. But using 512 as block size results upto 2K bytes data (4 blocks) being transferred and causes buffer overflow in firmware. Both changes above are backward compatible with earlier firmware versions for SD8385/SD8686. The SDIO_DEVICE_IDs for SD8688 chip are added in include/linux/mmc/sdio_ids.h Signed-off-by: Kiran Divekar Signed-off-by: Bing Zhao Acked-by: Dan Williams Signed-off-by: John W. Linville --- include/linux/mmc/sdio_ids.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h index ea1bf5ba092f..c7211ab6dd4b 100644 --- a/include/linux/mmc/sdio_ids.h +++ b/include/linux/mmc/sdio_ids.h @@ -25,5 +25,7 @@ #define SDIO_VENDOR_ID_MARVELL 0x02df #define SDIO_DEVICE_ID_MARVELL_LIBERTAS 0x9103 +#define SDIO_DEVICE_ID_MARVELL_8688WLAN 0x9104 +#define SDIO_DEVICE_ID_MARVELL_8688BT 0x9105 #endif -- cgit v1.2.3 From 10f644a47b76d3e61b98f2d02ce9690b94c51ee5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 16 Apr 2009 13:17:25 +0200 Subject: mac80211: disable powersave if pm_qos asks for low latency When an application asks for a latency lower than the beacon interval there's nothing we can do -- we need to stay awake and not have the AP buffer frames for us. Add code to automatically calculate this constraint in mac80211 so drivers need not concern themselves with it. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 4b501b48ce86..53563d53b5ad 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1383,4 +1383,13 @@ static inline int ieee80211_freq_to_ofdm_chan(int s_freq, int freq) return -1; } +/** + * ieee80211_tu_to_usec - convert time units (TU) to microseconds + * @tu: the TUs + */ +static inline unsigned long ieee80211_tu_to_usec(unsigned long tu) +{ + return 1024 * tu; +} + #endif /* LINUX_IEEE80211_H */ -- cgit v1.2.3 From 04a773ade0680d862b479d7219973df60f7a3834 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 19 Apr 2009 21:24:32 +0200 Subject: cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index c01423888db9..25ce3e42bd10 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -223,6 +223,15 @@ * %NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this * event matches with MLME-MICHAELMICFAILURE.indication() primitive * + * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a + * FREQ attribute (for the initial frequency if no peer can be found) + * and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those + * should be fixed rather than automatically determined. Can only be + * executed on a network interface that is UP, and fixed BSSID/FREQ + * may be rejected. + * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is + * determined by the network interface. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -288,6 +297,9 @@ enum nl80211_commands { NL80211_CMD_REG_BEACON_HINT, + NL80211_CMD_JOIN_IBSS, + NL80211_CMD_LEAVE_IBSS, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -456,6 +468,9 @@ enum nl80211_commands { * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported * cipher suites * + * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look + * for other networks on different channels + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -547,6 +562,9 @@ enum nl80211_attrs { NL80211_ATTR_FREQ_BEFORE, NL80211_ATTR_FREQ_AFTER, + + NL80211_ATTR_FREQ_FIXED, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.3 From b9a5f8cab751d362f7c2d94899ca788c22fcd1ef Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Mon, 20 Apr 2009 18:39:05 +0200 Subject: nl80211: Add set/get for frag/rts threshold and retry limits Add new nl80211 attributes that can be used with NL80211_CMD_SET_WIPHY and NL80211_CMD_GET_WIPHY to manage fragmentation/RTS threshold and retry limits. Since these values are stored in struct wiphy, remove the local copy from mac80211 where feasible (frag & rts threshold). The retry limits are currently needed in struct ieee80211_conf, but these could be eventually removed since the driver should have access to the values in struct wiphy. Signed-off-by: Jouni Malinen Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 25ce3e42bd10..dc9d9ec5d1ae 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -46,8 +46,10 @@ * to get a list of all present wiphys. * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, - * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, and/or - * %NL80211_ATTR_WIPHY_CHANNEL_TYPE. + * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, + * %NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT, + * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, + * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD. * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request * or rename notification. Has attributes %NL80211_ATTR_WIPHY and * %NL80211_ATTR_WIPHY_NAME. @@ -337,6 +339,18 @@ enum nl80211_commands { * NL80211_CHAN_HT20 = HT20 only * NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel * NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel + * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is + * less than or equal to the RTS threshold; allowed range: 1..255; + * dot11ShortRetryLimit; u8 + * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is + * greater than the RTS threshold; allowed range: 1..255; + * dot11ShortLongLimit; u8 + * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum + * length in octets for frames; allowed range: 256..8000, disable + * fragmentation with (u32)-1; dot11FragmentationThreshold; u32 + * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length + * larger than or equal to this use RTS/CTS handshake); allowed range: + * 0..65536, disable with (u32)-1; dot11RTSThreshold; u32 * * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on * @NL80211_ATTR_IFNAME: network interface name @@ -565,6 +579,12 @@ enum nl80211_attrs { NL80211_ATTR_FREQ_FIXED, + + NL80211_ATTR_WIPHY_RETRY_SHORT, + NL80211_ATTR_WIPHY_RETRY_LONG, + NL80211_ATTR_WIPHY_FRAG_THRESHOLD, + NL80211_ATTR_WIPHY_RTS_THRESHOLD, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.3 From e7ec86f54e519e8e86f1cf328db13263f3ef8bd4 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 18 Apr 2009 17:33:24 +0200 Subject: mac80211: validate TIM IE length (redux) The TIM IE must not be shorter than 4 bytes, so verify that when parsing it and use the proper type. To ease that adjust struct ieee80211_tim_ie to have a virtual bitmap of size at least 1. Also check that the TIM IE is actually present before trying to parse it! Because other people may need the function, make it a static inline in ieee80211.h. (The original "mac80211: validate TIM IE length" was a minimal fix for 2.6.30. This purports to be the full, correct fix. -- JWL) Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 32 +++++++++++++++++++++++++++++++- 1 file changed, 31 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 53563d53b5ad..c52e7fba4e40 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -540,7 +540,7 @@ struct ieee80211_tim_ie { u8 dtim_period; u8 bitmap_ctrl; /* variable size: 1 - 251 bytes */ - u8 virtual_map[0]; + u8 virtual_map[1]; } __attribute__ ((packed)); #define WLAN_SA_QUERY_TR_ID_LEN 16 @@ -1392,4 +1392,34 @@ static inline unsigned long ieee80211_tu_to_usec(unsigned long tu) return 1024 * tu; } +/** + * ieee80211_check_tim - check if AID bit is set in TIM + * @tim: the TIM IE + * @tim_len: length of the TIM IE + * @aid: the AID to look for + */ +static inline bool ieee80211_check_tim(struct ieee80211_tim_ie *tim, + u8 tim_len, u16 aid) +{ + u8 mask; + u8 index, indexn1, indexn2; + + if (unlikely(!tim || tim_len < sizeof(*tim))) + return false; + + aid &= 0x3fff; + index = aid / 8; + mask = 1 << (aid & 7); + + indexn1 = tim->bitmap_ctrl & 0xfe; + indexn2 = tim_len + indexn1 - 4; + + if (index < indexn1 || index > indexn2) + return false; + + index -= indexn1; + + return !!(tim->virtual_map[index] & mask); +} + #endif /* LINUX_IEEE80211_H */ -- cgit v1.2.3 From 8e30bc55de98c000b0b836cb42525c82f605f191 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 22 Apr 2009 17:45:38 +0200 Subject: nl80211: allow configuring IBSS beacon interval Make the JOIN_IBSS command look at the beacon interval attribute to see if the user requested a specific beacon interval, if not default to 100 TU (wext too). Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index dc9d9ec5d1ae..b6a48dd502ce 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -230,7 +230,9 @@ * and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those * should be fixed rather than automatically determined. Can only be * executed on a network interface that is UP, and fixed BSSID/FREQ - * may be rejected. + * may be rejected. Another optional parameter is the beacon interval, + * given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not + * given defaults to 100 TU (102.4ms). * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is * determined by the network interface. * -- cgit v1.2.3 From 1965c85331ed29dc4fd32479ff31663e3e9a518f Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Wed, 22 Apr 2009 21:38:25 +0300 Subject: nl80211: Add event for authentication/association timeout SME needs to be notified when the authentication or association attempt times out and MLME has stopped processing in order to allow the SME to decide what to do next. Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- include/linux/nl80211.h | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index b6a48dd502ce..e9fd13aa79f0 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -203,8 +203,12 @@ * frame, i.e., it was for the local STA and was received in correct * state. This is similar to MLME-AUTHENTICATE.confirm primitive in the * MLME SAP interface (kernel providing MLME, userspace SME). The - * included NL80211_ATTR_FRAME attribute contains the management frame - * (including both the header and frame body, but not FCS). + * included %NL80211_ATTR_FRAME attribute contains the management frame + * (including both the header and frame body, but not FCS). This event is + * also used to indicate if the authentication attempt timed out. In that + * case the %NL80211_ATTR_FRAME attribute is replaced with a + * %NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which + * pending authentication timed out). * @NL80211_CMD_ASSOCIATE: association request and notification; like * NL80211_CMD_AUTHENTICATE but for Association and Reassociation * (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request, @@ -487,6 +491,9 @@ enum nl80211_commands { * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look * for other networks on different channels * + * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this + * is used, e.g., with %NL80211_CMD_AUTHENTICATE event + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -587,6 +594,8 @@ enum nl80211_attrs { NL80211_ATTR_WIPHY_FRAG_THRESHOLD, NL80211_ATTR_WIPHY_RTS_THRESHOLD, + NL80211_ATTR_TIMED_OUT, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.3 From 9d5c5d8f4105dc56ec10864b195dd1714f282c22 Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner Date: Tue, 21 Apr 2009 23:26:22 +0000 Subject: af_iucv: add sockopt() to enable/disable use of IPRM_DATA msgs Provide the socket operations getsocktopt() and setsockopt() to enable/disable sending of data in the parameter list of IUCV messages. The patch sets respective flag only. Signed-off-by: Hendrik Brueckner Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- include/linux/socket.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/socket.h b/include/linux/socket.h index 42a0396f2c59..d2310cb45d2f 100644 --- a/include/linux/socket.h +++ b/include/linux/socket.h @@ -303,6 +303,7 @@ struct ucred { #define SOL_BLUETOOTH 274 #define SOL_PNPIPE 275 #define SOL_RDS 276 +#define SOL_IUCV 277 /* IPX options */ #define IPX_TYPE 1 -- cgit v1.2.3 From edf391ff17232f097d72441c9ad467bcb3b5db18 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Mon, 27 Apr 2009 02:45:02 -0700 Subject: snmp: add missing counters for RFC 4293 The IP MIB (RFC 4293) defines stats for InOctets, OutOctets, InMcastOctets and OutMcastOctets: http://tools.ietf.org/html/rfc4293 But it seems we don't track those in any way that easy to separate from other protocols. This patch adds those missing counters to the stats file. Tested successfully by me With help from Eric Dumazet. Signed-off-by: Neil Horman Signed-off-by: David S. Miller --- include/linux/snmp.h | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/snmp.h b/include/linux/snmp.h index aee3f1e1d1ce..0f953fe40413 100644 --- a/include/linux/snmp.h +++ b/include/linux/snmp.h @@ -18,7 +18,7 @@ enum { IPSTATS_MIB_NUM = 0, - IPSTATS_MIB_INRECEIVES, /* InReceives */ + IPSTATS_MIB_INPKTS, /* InReceives */ IPSTATS_MIB_INHDRERRORS, /* InHdrErrors */ IPSTATS_MIB_INTOOBIGERRORS, /* InTooBigErrors */ IPSTATS_MIB_INNOROUTES, /* InNoRoutes */ @@ -28,7 +28,7 @@ enum IPSTATS_MIB_INDISCARDS, /* InDiscards */ IPSTATS_MIB_INDELIVERS, /* InDelivers */ IPSTATS_MIB_OUTFORWDATAGRAMS, /* OutForwDatagrams */ - IPSTATS_MIB_OUTREQUESTS, /* OutRequests */ + IPSTATS_MIB_OUTPKTS, /* OutRequests */ IPSTATS_MIB_OUTDISCARDS, /* OutDiscards */ IPSTATS_MIB_OUTNOROUTES, /* OutNoRoutes */ IPSTATS_MIB_REASMTIMEOUT, /* ReasmTimeout */ @@ -42,6 +42,12 @@ enum IPSTATS_MIB_OUTMCASTPKTS, /* OutMcastPkts */ IPSTATS_MIB_INBCASTPKTS, /* InBcastPkts */ IPSTATS_MIB_OUTBCASTPKTS, /* OutBcastPkts */ + IPSTATS_MIB_INOCTETS, /* InOctets */ + IPSTATS_MIB_OUTOCTETS, /* OutOctets */ + IPSTATS_MIB_INMCASTOCTETS, /* InMcastOctets */ + IPSTATS_MIB_OUTMCASTOCTETS, /* OutMcastOctets */ + IPSTATS_MIB_INBCASTOCTETS, /* InBcastOctets */ + IPSTATS_MIB_OUTBCASTOCTETS, /* OutBcastOctets */ __IPSTATS_MIB_MAX }; -- cgit v1.2.3 From 739649c53d7f78f5bf41bdfd1a858ee90c7a687a Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Sat, 25 Apr 2009 12:52:40 +0000 Subject: of: add of_parse_phandle() helper for parsing phandle properties of_parse_phandle() is a helper function to read and parse a phandle property and return a pointer to the resulting device_node. Signed-off-by: Grant Likely Acked-by: Andy Fleming Signed-off-by: David S. Miller --- include/linux/of.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/of.h b/include/linux/of.h index 6a7efa242f5e..7be2d1043c16 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -77,6 +77,9 @@ extern int of_n_size_cells(struct device_node *np); extern const struct of_device_id *of_match_node( const struct of_device_id *matches, const struct device_node *node); extern int of_modalias_node(struct device_node *node, char *modalias, int len); +extern struct device_node *of_parse_phandle(struct device_node *np, + const char *phandle_name, + int index); extern int of_parse_phandles_with_args(struct device_node *np, const char *list_name, const char *cells_name, int index, struct device_node **out_node, const void **out_args); -- cgit v1.2.3 From 4dea547fef1ba23f9d23f5e7f5218187a7dcf1b3 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Sat, 25 Apr 2009 12:52:46 +0000 Subject: phylib: rework to prepare for OF registration of PHYs This patch makes changes in preparation for supporting open firmware device tree descriptions of MDIO busses. Changes include: - Cleanup handling of phy_map[] entries; they are already NULLed when registering and so don't need to be re-cleared, and it is good practice to clear them out when unregistering. - Split phy_device registration out into a new function so that the OF helpers can do two stage registration (separate allocation and registration steps). Signed-off-by: Grant Likely Acked-by: Andy Fleming Signed-off-by: David S. Miller --- include/linux/phy.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/phy.h b/include/linux/phy.h index 97e40cb6b588..bf0b5f112dc7 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -444,6 +444,7 @@ static inline int phy_write(struct phy_device *phydev, u16 regnum, u16 val) int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id); struct phy_device* get_phy_device(struct mii_bus *bus, int addr); +int phy_device_register(struct phy_device *phy); int phy_clear_interrupt(struct phy_device *phydev); int phy_config_interrupt(struct phy_device *phydev, u32 interrupts); struct phy_device * phy_attach(struct net_device *dev, -- cgit v1.2.3 From fa94f6d93c5382810ff41f010f12ca8698fc775e Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Sat, 25 Apr 2009 12:52:51 +0000 Subject: phylib: add *_direct() variants of phy_connect and phy_attach functions Add phy_connect_direct() and phy_attach_direct() functions so that drivers can use a pointer to the phy_device instead of trying to determine the phy's bus_id string. This patch is useful for OF device tree descriptions of phy devices where the driver doesn't need or know what the bus_id value in order to get a phy_device pointer. Signed-off-by: Grant Likely Acked-by: Andy Fleming Signed-off-by: David S. Miller --- include/linux/phy.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/phy.h b/include/linux/phy.h index bf0b5f112dc7..c216e4e503b3 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -447,8 +447,13 @@ struct phy_device* get_phy_device(struct mii_bus *bus, int addr); int phy_device_register(struct phy_device *phy); int phy_clear_interrupt(struct phy_device *phydev); int phy_config_interrupt(struct phy_device *phydev, u32 interrupts); +int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, + u32 flags, phy_interface_t interface); struct phy_device * phy_attach(struct net_device *dev, const char *bus_id, u32 flags, phy_interface_t interface); +int phy_connect_direct(struct net_device *dev, struct phy_device *phydev, + void (*handler)(struct net_device *), u32 flags, + phy_interface_t interface); struct phy_device * phy_connect(struct net_device *dev, const char *bus_id, void (*handler)(struct net_device *), u32 flags, phy_interface_t interface); -- cgit v1.2.3 From 8bc487d150b939e69830c39322df4ee486efe381 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Sat, 25 Apr 2009 12:52:56 +0000 Subject: openfirmware: Add OF phylib support code Add support for parsing the device tree for PHY devices on an MDIO bus. Currently many of the PowerPC ethernet drivers are open coding a solution for reading data out of the device tree to find the correct PHY device. This patch implements a set of common routines to: a) let MDIO bus drivers register phy_devices described in the tree, and b) let MAC drivers find the correct phy_device via the tree. Signed-off-by: Grant Likely Acked-by: Andy Fleming Signed-off-by: David S. Miller --- include/linux/of_mdio.h | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 include/linux/of_mdio.h (limited to 'include/linux') diff --git a/include/linux/of_mdio.h b/include/linux/of_mdio.h new file mode 100644 index 000000000000..c9663c690303 --- /dev/null +++ b/include/linux/of_mdio.h @@ -0,0 +1,22 @@ +/* + * OF helpers for the MDIO (Ethernet PHY) API + * + * Copyright (c) 2009 Secret Lab Technologies, Ltd. + * + * This file is released under the GPLv2 + */ + +#ifndef __LINUX_OF_MDIO_H +#define __LINUX_OF_MDIO_H + +#include +#include + +extern int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np); +extern struct phy_device *of_phy_find_device(struct device_node *phy_np); +extern struct phy_device *of_phy_connect(struct net_device *dev, + struct device_node *phy_np, + void (*hndlr)(struct net_device *), + u32 flags, phy_interface_t iface); + +#endif /* __LINUX_OF_MDIO_H */ -- cgit v1.2.3 From aa73832c5a80d6c52c69b18af858d88fa595dd3c Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Sat, 25 Apr 2009 12:53:33 +0000 Subject: net: Rework fs_enet driver to use of_mdio infrastructure This patch simplifies the driver by making use of more common code. Signed-off-by: Grant Likely Acked-by: Andy Fleming Signed-off-by: David S. Miller --- include/linux/fs_enet_pd.h | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fs_enet_pd.h b/include/linux/fs_enet_pd.h index 8300cab30f9a..51b793466ff3 100644 --- a/include/linux/fs_enet_pd.h +++ b/include/linux/fs_enet_pd.h @@ -17,6 +17,7 @@ #define FS_ENET_PD_H #include +#include #include #define FS_ENET_NAME "fs_enet" @@ -130,10 +131,7 @@ struct fs_platform_info { u32 device_flags; - int phy_addr; /* the phy address (-1 no phy) */ - char bus_id[16]; - int phy_irq; /* the phy irq (if it exists) */ - + struct device_node *phy_node; const struct fs_mii_bus_info *bus_info; int rx_ring, tx_ring; /* number of buffers on rx */ -- cgit v1.2.3 From f85ba78068ac137fe9c1f50d25405d2783d75c77 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 27 Apr 2009 03:23:54 -0700 Subject: tun: add IFF_TUN_EXCL flag to avoid opening a persistent device. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When creating a certain types of VPN, NetworkManager will first attempt to find an available tun device by iterating through 'vpn%d' until it finds one that isn't already busy. Then it'll set that to be persistent and owned by the otherwise unprivileged user that the VPN dæmon itself runs as. There's a race condition here -- during the period where the vpn%d device is created and we're waiting for the VPN dæmon to actually connect and use it, if we try to create _another_ device we could end up re-using the same one -- because trying to open it again doesn't get -EBUSY as it would while it's _actually_ busy. So solve this, we add an IFF_TUN_EXCL flag which causes tun_set_iff() to fail if it would be opening an existing persistent tundevice -- so that we can make sure we're getting an entirely _new_ device. Signed-off-by: David Woodhouse Signed-off-by: David S. Miller --- include/linux/if_tun.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h index 049d6c9428db..915ba5789f0e 100644 --- a/include/linux/if_tun.h +++ b/include/linux/if_tun.h @@ -55,6 +55,7 @@ #define IFF_NO_PI 0x1000 #define IFF_ONE_QUEUE 0x2000 #define IFF_VNET_HDR 0x4000 +#define IFF_TUN_EXCL 0x8000 /* Features for GSO (TUNSETOFFLOAD). */ #define TUN_F_CSUM 0x01 /* You can hand me unchecksummed packets. */ -- cgit v1.2.3 From edbd9e30306067c3a45c035eb95a6f49daaa2337 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 27 Apr 2009 05:44:29 -0700 Subject: gro: Fix handling of headers that extend over the tail The skb_gro_* code fails to handle the case where a header starts in the linear area but ends in the frags area. Since the goal of skb_gro_* is to optimise the case of completely non-linear packets, we can simply bail out if we have anything in the linear area. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- include/linux/netdevice.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 31167451d08d..c9ef41916071 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1137,7 +1137,7 @@ static inline void skb_gro_reset_offset(struct sk_buff *skb) static inline void *skb_gro_mac_header(struct sk_buff *skb) { - return skb_mac_header(skb) < skb->data ? skb_mac_header(skb) : + return skb_headlen(skb) ? skb_mac_header(skb) : page_address(skb_shinfo(skb)->frags[0].page) + skb_shinfo(skb)->frags[0].page_offset; } -- cgit v1.2.3 From 36e7b1b8dac1a785abca3a121b6b0b79f1a8d7df Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 27 Apr 2009 05:44:45 -0700 Subject: gro: Fix COMPLETE checksum handling On a brand new GRO skb, we cannot call ip_hdr since the header may lie in the non-linear area. This patch adds the helper skb_gro_network_header to handle this. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- include/linux/netdevice.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index c9ef41916071..fe20d171acf1 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1142,6 +1142,13 @@ static inline void *skb_gro_mac_header(struct sk_buff *skb) skb_shinfo(skb)->frags[0].page_offset; } +static inline void *skb_gro_network_header(struct sk_buff *skb) +{ + return skb_headlen(skb) ? skb_network_header(skb) : + page_address(skb_shinfo(skb)->frags[0].page) + + skb_shinfo(skb)->frags[0].page_offset + skb_network_offset(skb); +} + static inline int dev_hard_header(struct sk_buff *skb, struct net_device *dev, unsigned short type, const void *daddr, const void *saddr, -- cgit v1.2.3 From 833cc67c7722e35863c6aaee9df56b442ef957ae Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 27 Apr 2009 21:32:16 +0000 Subject: smsc911x: add fifo byteswap support V2 This is V2 of the smsc911x fifo byteswap patch. The smsc911x hardware supports both big and little and endian hardware configurations, and the linux smsc911x driver currently detects word order. For correct operation on big endian platforms lacking swapped byte lanes the following patch is needed. Only fifo data is swapped, register data does not require any swapping. Signed-off-by: Magnus Damm Acked-by: Steve Glendinning Signed-off-by: David S. Miller --- include/linux/smsc911x.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/smsc911x.h b/include/linux/smsc911x.h index b32725075d71..5241e4fb4eca 100644 --- a/include/linux/smsc911x.h +++ b/include/linux/smsc911x.h @@ -47,4 +47,14 @@ struct smsc911x_platform_config { #define SMSC911X_FORCE_EXTERNAL_PHY (BIT(3)) #define SMSC911X_SAVE_MAC_ADDRESS (BIT(4)) +/* + * SMSC911X_SWAP_FIFO: + * Enables software byte swap for fifo data. Should only be used as a + * "last resort" in the case of big endian mode on boards with incorrectly + * routed data bus to older devices such as LAN9118. Newer devices such as + * LAN9221 can handle this in hardware, there are registers to control + * this swapping but the driver doesn't currently use them. + */ +#define SMSC911X_SWAP_FIFO (BIT(5)) + #endif /* __LINUX_SMSC911X_H__ */ -- cgit v1.2.3 From 8dc92f7e2ecfd93f5c57da78594a7a5482e2c15e Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Mon, 27 Apr 2009 22:35:52 +0000 Subject: sctp: add feature bit for SCTP offload in hardware this is the sctp code to enable hardware crc32c offload for adapters that support it. Originally by: Vlad Yasevich modified by Jesse Brandeburg Signed-off-by: Jesse Brandeburg Signed-off-by: Vlad Yasevich Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- include/linux/netdevice.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index fe20d171acf1..f8c3619d551f 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -670,7 +670,9 @@ struct net_device #define NETIF_F_GRO 16384 /* Generic receive offload */ #define NETIF_F_LRO 32768 /* large receive offload */ +/* the GSO_MASK reserves bits 16 through 23 */ #define NETIF_F_FCOE_CRC (1 << 24) /* FCoE CRC32 */ +#define NETIF_F_SCTP_CSUM (1 << 25) /* SCTP checksum offload */ /* Segmentation offload features */ #define NETIF_F_GSO_SHIFT 16 -- cgit v1.2.3 From 6a321cb370ad3db4ba6e405e638b3a42c41089b0 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 28 Apr 2009 04:43:42 -0700 Subject: net: netif_tx_queue_stopped too expensive netif_tx_queue_stopped(txq) is most of the time false. Yet its cost is very expensive on SMP. static inline int netif_tx_queue_stopped(const struct netdev_queue *dev_queue) { return test_bit(__QUEUE_STATE_XOFF, &dev_queue->state); } I saw this on oprofile hunting and bnx2 driver bnx2_tx_int(). We probably should split "struct netdev_queue" in two parts, one being read mostly. __netif_tx_lock() touches _xmit_lock & xmit_lock_owner, these deserve a separate cache line. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/netdevice.h | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index f8c3619d551f..505a3c6cb12d 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -447,12 +447,18 @@ enum netdev_queue_state_t }; struct netdev_queue { +/* + * read mostly part + */ struct net_device *dev; struct Qdisc *qdisc; unsigned long state; - spinlock_t _xmit_lock; - int xmit_lock_owner; struct Qdisc *qdisc_sleeping; +/* + * write mostly part + */ + spinlock_t _xmit_lock ____cacheline_aligned_in_smp; + int xmit_lock_owner; } ____cacheline_aligned_in_smp; -- cgit v1.2.3 From 0821c71751ef88f4251d7206e76ce497ee267a2d Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 29 Apr 2009 08:02:59 +0000 Subject: ethtool: Add port type PORT_OTHER Add a PORT_OTHER to represent all other physical port types. Current NICs generally do not allow switching between multiple port types in software so specific types should not be needed. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/linux/ethtool.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index 131b127b70f8..5ccb6bd660c7 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -605,6 +605,7 @@ struct ethtool_ops { #define PORT_MII 0x02 #define PORT_FIBRE 0x03 #define PORT_BNC 0x04 +#define PORT_OTHER 0xff /* Which transceiver to use. */ #define XCVR_INTERNAL 0x00 -- cgit v1.2.3 From 52c94dfae11d9ffd70b7bd003a36a4e210f2866a Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 29 Apr 2009 08:04:14 +0000 Subject: mdio: Add register definitions for MDIO (clause 45) IEEE 802.3 clause 45 specifies the MDIO interface and registers for use in 10G and other PHYs, similar to the MII management interface. PHYs may have up to 32 MMDs corresponding to different sub-layers and functions, each with up to 65536 registers. These are addressed by PRTAD (similar to the MII PHY address) and DEVAD. Define a mapping for specifying PRTAD and DEVAD through the existing MII ioctls. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/linux/mdio.h | 237 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 237 insertions(+) create mode 100644 include/linux/mdio.h (limited to 'include/linux') diff --git a/include/linux/mdio.h b/include/linux/mdio.h new file mode 100644 index 000000000000..d57ddb08a1b2 --- /dev/null +++ b/include/linux/mdio.h @@ -0,0 +1,237 @@ +/* + * linux/mdio.h: definitions for MDIO (clause 45) transceivers + * Copyright 2006-2009 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#ifndef __LINUX_MDIO_H__ +#define __LINUX_MDIO_H__ + +#include + +/* MDIO Manageable Devices (MMDs). */ +#define MDIO_MMD_PMAPMD 1 /* Physical Medium Attachment/ + * Physical Medium Dependent */ +#define MDIO_MMD_WIS 2 /* WAN Interface Sublayer */ +#define MDIO_MMD_PCS 3 /* Physical Coding Sublayer */ +#define MDIO_MMD_PHYXS 4 /* PHY Extender Sublayer */ +#define MDIO_MMD_DTEXS 5 /* DTE Extender Sublayer */ +#define MDIO_MMD_TC 6 /* Transmission Convergence */ +#define MDIO_MMD_AN 7 /* Auto-Negotiation */ +#define MDIO_MMD_C22EXT 29 /* Clause 22 extension */ +#define MDIO_MMD_VEND1 30 /* Vendor specific 1 */ +#define MDIO_MMD_VEND2 31 /* Vendor specific 2 */ + +/* Generic MDIO registers. */ +#define MDIO_CTRL1 MII_BMCR +#define MDIO_STAT1 MII_BMSR +#define MDIO_DEVID1 MII_PHYSID1 +#define MDIO_DEVID2 MII_PHYSID2 +#define MDIO_SPEED 4 /* Speed ability */ +#define MDIO_DEVS1 5 /* Devices in package */ +#define MDIO_DEVS2 6 +#define MDIO_CTRL2 7 /* 10G control 2 */ +#define MDIO_STAT2 8 /* 10G status 2 */ +#define MDIO_PMA_TXDIS 9 /* 10G PMA/PMD transmit disable */ +#define MDIO_PMA_RXDET 10 /* 10G PMA/PMD receive signal detect */ +#define MDIO_PMA_EXTABLE 11 /* 10G PMA/PMD extended ability */ +#define MDIO_PKGID1 14 /* Package identifier */ +#define MDIO_PKGID2 15 +#define MDIO_AN_ADVERTISE 16 /* AN advertising (base page) */ +#define MDIO_AN_LPA 19 /* AN LP abilities (base page) */ +#define MDIO_PHYXS_LNSTAT 24 /* PHY XGXS lane state */ + +/* Media-dependent registers. */ +#define MDIO_PMA_10GBT_TXPWR 131 /* 10GBASE-T TX power control */ +#define MDIO_PCS_10GBX_STAT1 24 /* 10GBASE-X PCS status 1 */ +#define MDIO_PCS_10GBRT_STAT1 32 /* 10GBASE-R/-T PCS status 1 */ +#define MDIO_PCS_10GBRT_STAT2 33 /* 10GBASE-R/-T PCS status 2 */ +#define MDIO_AN_10GBT_CTRL 32 /* 10GBASE-T auto-negotiation control */ +#define MDIO_AN_10GBT_STAT 33 /* 10GBASE-T auto-negotiation status */ + +/* Control register 1. */ +/* Enable extended speed selection */ +#define MDIO_CTRL1_SPEEDSELEXT (BMCR_SPEED1000 | BMCR_SPEED100) +/* All speed selection bits */ +#define MDIO_CTRL1_SPEEDSEL (MDIO_CTRL1_SPEEDSELEXT | 0x003c) +#define MDIO_CTRL1_FULLDPLX BMCR_FULLDPLX +#define MDIO_CTRL1_LPOWER BMCR_PDOWN +#define MDIO_CTRL1_RESET BMCR_RESET +#define MDIO_PMA_CTRL1_LOOPBACK 0x0001 +#define MDIO_PMA_CTRL1_SPEED1000 BMCR_SPEED1000 +#define MDIO_PMA_CTRL1_SPEED100 BMCR_SPEED100 +#define MDIO_PCS_CTRL1_LOOPBACK BMCR_LOOPBACK +#define MDIO_PHYXS_CTRL1_LOOPBACK BMCR_LOOPBACK +#define MDIO_AN_CTRL1_RESTART BMCR_ANRESTART +#define MDIO_AN_CTRL1_ENABLE BMCR_ANENABLE +#define MDIO_AN_CTRL1_XNP 0x2000 /* Enable extended next page */ + +/* 10 Gb/s */ +#define MDIO_CTRL1_SPEED10G (MDIO_CTRL1_SPEEDSELEXT | 0x00) +/* 10PASS-TS/2BASE-TL */ +#define MDIO_CTRL1_SPEED10P2B (MDIO_CTRL1_SPEEDSELEXT | 0x04) + +/* Status register 1. */ +#define MDIO_STAT1_LPOWERABLE 0x0002 /* Low-power ability */ +#define MDIO_STAT1_LSTATUS BMSR_LSTATUS +#define MDIO_STAT1_FAULT 0x0080 /* Fault */ +#define MDIO_AN_STAT1_LPABLE 0x0001 /* Link partner AN ability */ +#define MDIO_AN_STAT1_ABLE BMSR_ANEGCAPABLE +#define MDIO_AN_STAT1_RFAULT BMSR_RFAULT +#define MDIO_AN_STAT1_COMPLETE BMSR_ANEGCOMPLETE +#define MDIO_AN_STAT1_PAGE 0x0040 /* Page received */ +#define MDIO_AN_STAT1_XNP 0x0080 /* Extended next page status */ + +/* Speed register. */ +#define MDIO_SPEED_10G 0x0001 /* 10G capable */ +#define MDIO_PMA_SPEED_2B 0x0002 /* 2BASE-TL capable */ +#define MDIO_PMA_SPEED_10P 0x0004 /* 10PASS-TS capable */ +#define MDIO_PMA_SPEED_1000 0x0010 /* 1000M capable */ +#define MDIO_PMA_SPEED_100 0x0020 /* 100M capable */ +#define MDIO_PMA_SPEED_10 0x0040 /* 10M capable */ +#define MDIO_PCS_SPEED_10P2B 0x0002 /* 10PASS-TS/2BASE-TL capable */ + +/* Device present registers. */ +#define MDIO_DEVS_PRESENT(devad) (1 << (devad)) +#define MDIO_DEVS_PMAPMD MDIO_DEVS_PRESENT(MDIO_MMD_PMAPMD) +#define MDIO_DEVS_WIS MDIO_DEVS_PRESENT(MDIO_MMD_WIS) +#define MDIO_DEVS_PCS MDIO_DEVS_PRESENT(MDIO_MMD_PCS) +#define MDIO_DEVS_PHYXS MDIO_DEVS_PRESENT(MDIO_MMD_PHYXS) +#define MDIO_DEVS_DTEXS MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS) +#define MDIO_DEVS_TC MDIO_DEVS_PRESENT(MDIO_MMD_TC) +#define MDIO_DEVS_AN MDIO_DEVS_PRESENT(MDIO_MMD_AN) +#define MDIO_DEVS_C22EXT MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT) + +/* Control register 2. */ +#define MDIO_PMA_CTRL2_TYPE 0x000f /* PMA/PMD type selection */ +#define MDIO_PMA_CTRL2_10GBCX4 0x0000 /* 10GBASE-CX4 type */ +#define MDIO_PMA_CTRL2_10GBEW 0x0001 /* 10GBASE-EW type */ +#define MDIO_PMA_CTRL2_10GBLW 0x0002 /* 10GBASE-LW type */ +#define MDIO_PMA_CTRL2_10GBSW 0x0003 /* 10GBASE-SW type */ +#define MDIO_PMA_CTRL2_10GBLX4 0x0004 /* 10GBASE-LX4 type */ +#define MDIO_PMA_CTRL2_10GBER 0x0005 /* 10GBASE-ER type */ +#define MDIO_PMA_CTRL2_10GBLR 0x0006 /* 10GBASE-LR type */ +#define MDIO_PMA_CTRL2_10GBSR 0x0007 /* 10GBASE-SR type */ +#define MDIO_PMA_CTRL2_10GBLRM 0x0008 /* 10GBASE-LRM type */ +#define MDIO_PMA_CTRL2_10GBT 0x0009 /* 10GBASE-T type */ +#define MDIO_PMA_CTRL2_10GBKX4 0x000a /* 10GBASE-KX4 type */ +#define MDIO_PMA_CTRL2_10GBKR 0x000b /* 10GBASE-KR type */ +#define MDIO_PMA_CTRL2_1000BT 0x000c /* 1000BASE-T type */ +#define MDIO_PMA_CTRL2_1000BKX 0x000d /* 1000BASE-KX type */ +#define MDIO_PMA_CTRL2_100BTX 0x000e /* 100BASE-TX type */ +#define MDIO_PMA_CTRL2_10BT 0x000f /* 10BASE-T type */ +#define MDIO_PCS_CTRL2_TYPE 0x0003 /* PCS type selection */ +#define MDIO_PCS_CTRL2_10GBR 0x0000 /* 10GBASE-R type */ +#define MDIO_PCS_CTRL2_10GBX 0x0001 /* 10GBASE-X type */ +#define MDIO_PCS_CTRL2_10GBW 0x0002 /* 10GBASE-W type */ +#define MDIO_PCS_CTRL2_10GBT 0x0003 /* 10GBASE-T type */ + +/* Status register 2. */ +#define MDIO_STAT2_RXFAULT 0x0400 /* Receive fault */ +#define MDIO_STAT2_TXFAULT 0x0800 /* Transmit fault */ +#define MDIO_STAT2_DEVPRST 0xc000 /* Device present */ +#define MDIO_STAT2_DEVPRST_VAL 0x8000 /* Device present value */ +#define MDIO_PMA_STAT2_LBABLE 0x0001 /* PMA loopback ability */ +#define MDIO_PMA_STAT2_10GBEW 0x0002 /* 10GBASE-EW ability */ +#define MDIO_PMA_STAT2_10GBLW 0x0004 /* 10GBASE-LW ability */ +#define MDIO_PMA_STAT2_10GBSW 0x0008 /* 10GBASE-SW ability */ +#define MDIO_PMA_STAT2_10GBLX4 0x0010 /* 10GBASE-LX4 ability */ +#define MDIO_PMA_STAT2_10GBER 0x0020 /* 10GBASE-ER ability */ +#define MDIO_PMA_STAT2_10GBLR 0x0040 /* 10GBASE-LR ability */ +#define MDIO_PMA_STAT2_10GBSR 0x0080 /* 10GBASE-SR ability */ +#define MDIO_PMD_STAT2_TXDISAB 0x0100 /* PMD TX disable ability */ +#define MDIO_PMA_STAT2_EXTABLE 0x0200 /* Extended abilities */ +#define MDIO_PMA_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */ +#define MDIO_PMA_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */ +#define MDIO_PCS_STAT2_10GBR 0x0001 /* 10GBASE-R capable */ +#define MDIO_PCS_STAT2_10GBX 0x0002 /* 10GBASE-X capable */ +#define MDIO_PCS_STAT2_10GBW 0x0004 /* 10GBASE-W capable */ +#define MDIO_PCS_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */ +#define MDIO_PCS_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */ + +/* Transmit disable register. */ +#define MDIO_PMD_TXDIS_GLOBAL 0x0001 /* Global PMD TX disable */ +#define MDIO_PMD_TXDIS_0 0x0002 /* PMD TX disable 0 */ +#define MDIO_PMD_TXDIS_1 0x0004 /* PMD TX disable 1 */ +#define MDIO_PMD_TXDIS_2 0x0008 /* PMD TX disable 2 */ +#define MDIO_PMD_TXDIS_3 0x0010 /* PMD TX disable 3 */ + +/* Receive signal detect register. */ +#define MDIO_PMD_RXDET_GLOBAL 0x0001 /* Global PMD RX signal detect */ +#define MDIO_PMD_RXDET_0 0x0002 /* PMD RX signal detect 0 */ +#define MDIO_PMD_RXDET_1 0x0004 /* PMD RX signal detect 1 */ +#define MDIO_PMD_RXDET_2 0x0008 /* PMD RX signal detect 2 */ +#define MDIO_PMD_RXDET_3 0x0010 /* PMD RX signal detect 3 */ + +/* Extended abilities register. */ +#define MDIO_PMA_EXTABLE_10GCX4 0x0001 /* 10GBASE-CX4 ability */ +#define MDIO_PMA_EXTABLE_10GBLRM 0x0002 /* 10GBASE-LRM ability */ +#define MDIO_PMA_EXTABLE_10GBT 0x0004 /* 10GBASE-T ability */ +#define MDIO_PMA_EXTABLE_10GBKX4 0x0008 /* 10GBASE-KX4 ability */ +#define MDIO_PMA_EXTABLE_10GBKR 0x0010 /* 10GBASE-KR ability */ +#define MDIO_PMA_EXTABLE_1000BT 0x0020 /* 1000BASE-T ability */ +#define MDIO_PMA_EXTABLE_1000BKX 0x0040 /* 1000BASE-KX ability */ +#define MDIO_PMA_EXTABLE_100BTX 0x0080 /* 100BASE-TX ability */ +#define MDIO_PMA_EXTABLE_10BT 0x0100 /* 10BASE-T ability */ + +/* PHY XGXS lane state register. */ +#define MDIO_PHYXS_LNSTAT_SYNC0 0x0001 +#define MDIO_PHYXS_LNSTAT_SYNC1 0x0002 +#define MDIO_PHYXS_LNSTAT_SYNC2 0x0004 +#define MDIO_PHYXS_LNSTAT_SYNC3 0x0008 +#define MDIO_PHYXS_LNSTAT_ALIGN 0x1000 + +/* PMA 10GBASE-T TX power register. */ +#define MDIO_PMA_10GBT_TXPWR_SHORT 0x0001 /* Short-reach mode */ + +/* PCS 10GBASE-R/-T status register 1. */ +#define MDIO_PCS_10GBRT_STAT1_BLKLK 0x0001 /* Block lock attained */ + +/* PCS 10GBASE-R/-T status register 2. */ +#define MDIO_PCS_10GBRT_STAT2_ERR 0x00ff +#define MDIO_PCS_10GBRT_STAT2_BER 0x3f00 + +/* AN 10GBASE-T control register. */ +#define MDIO_AN_10GBT_CTRL_ADV10G 0x1000 /* Advertise 10GBASE-T */ + +/* AN 10GBASE-T status register. */ +#define MDIO_AN_10GBT_STAT_LPTRR 0x0200 /* LP training reset req. */ +#define MDIO_AN_10GBT_STAT_LPLTABLE 0x0400 /* LP loop timing ability */ +#define MDIO_AN_10GBT_STAT_LP10G 0x0800 /* LP is 10GBT capable */ +#define MDIO_AN_10GBT_STAT_REMOK 0x1000 /* Remote OK */ +#define MDIO_AN_10GBT_STAT_LOCOK 0x2000 /* Local OK */ +#define MDIO_AN_10GBT_STAT_MS 0x4000 /* Master/slave config */ +#define MDIO_AN_10GBT_STAT_MSFLT 0x8000 /* Master/slave config fault */ + +/* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */ + +#define MDIO_PHY_ID_C45 0x8000 +#define MDIO_PHY_ID_PRTAD 0x03e0 +#define MDIO_PHY_ID_DEVAD 0x001f +#define MDIO_PHY_ID_C45_MASK \ + (MDIO_PHY_ID_C45 | MDIO_PHY_ID_PRTAD | MDIO_PHY_ID_DEVAD) + +static inline __u16 mdio_phy_id_c45(int prtad, int devad) +{ + return MDIO_PHY_ID_C45 | (prtad << 5) | devad; +} + +static inline bool mdio_phy_id_is_c45(int phy_id) +{ + return (phy_id & MDIO_PHY_ID_C45) && !(phy_id & ~MDIO_PHY_ID_C45_MASK); +} + +static inline __u16 mdio_phy_id_prtad(int phy_id) +{ + return (phy_id & MDIO_PHY_ID_PRTAD) >> 5; +} + +static inline __u16 mdio_phy_id_devad(int phy_id) +{ + return phy_id & MDIO_PHY_ID_DEVAD; +} + +#endif /* __LINUX_MDIO_H__ */ -- cgit v1.2.3 From 1b1c2e95103ce391c2ea39a9460968fcb73deb30 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 29 Apr 2009 08:04:46 +0000 Subject: mdio: Add generic MDIO (clause 45) support functions These roughly mirror many of the MII library functions and are based on code from the sfc driver. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/linux/mdio.h | 66 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mdio.h b/include/linux/mdio.h index d57ddb08a1b2..ba41537eaa8a 100644 --- a/include/linux/mdio.h +++ b/include/linux/mdio.h @@ -234,4 +234,70 @@ static inline __u16 mdio_phy_id_devad(int phy_id) return phy_id & MDIO_PHY_ID_DEVAD; } +#ifdef __KERNEL__ + +/** + * struct mdio_if_info - Ethernet controller MDIO interface + * @prtad: PRTAD of the PHY (%MDIO_PRTAD_NONE if not present/unknown) + * @mmds: Mask of MMDs expected to be present in the PHY. This must be + * non-zero unless @prtad = %MDIO_PRTAD_NONE. + * @mode_support: MDIO modes supported. If %MDIO_SUPPORTS_C22 is set then + * MII register access will be passed through with @devad = + * %MDIO_DEVAD_NONE. If %MDIO_EMULATE_C22 is set then access to + * commonly used clause 22 registers will be translated into + * clause 45 registers. + * @dev: Net device structure + * @mdio_read: Register read function; returns value or negative error code + * @mdio_write: Register write function; returns 0 or negative error code + */ +struct mdio_if_info { + int prtad; + u32 __bitwise mmds; + unsigned mode_support; + + struct net_device *dev; + int (*mdio_read)(struct net_device *dev, int prtad, int devad, + u16 addr); + int (*mdio_write)(struct net_device *dev, int prtad, int devad, + u16 addr, u16 val); +}; + +#define MDIO_PRTAD_NONE (-1) +#define MDIO_DEVAD_NONE (-1) +#define MDIO_SUPPORTS_C22 1 +#define MDIO_SUPPORTS_C45 2 +#define MDIO_EMULATE_C22 4 + +struct ethtool_cmd; +struct ethtool_pauseparam; +extern int mdio45_probe(struct mdio_if_info *mdio, int prtad); +extern int mdio_set_flag(const struct mdio_if_info *mdio, + int prtad, int devad, u16 addr, int mask, + bool sense); +extern int mdio45_links_ok(const struct mdio_if_info *mdio, u32 mmds); +extern int mdio45_nway_restart(const struct mdio_if_info *mdio); +extern void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio, + struct ethtool_cmd *ecmd, + u32 npage_adv, u32 npage_lpa); + +/** + * mdio45_ethtool_gset - get settings for ETHTOOL_GSET + * @mdio: MDIO interface + * @ecmd: Ethtool request structure + * + * Since the CSRs for auto-negotiation using next pages are not fully + * standardised, this function does not attempt to decode them. Use + * mdio45_ethtool_gset_npage() to specify advertisement bits from next + * pages. + */ +static inline void mdio45_ethtool_gset(const struct mdio_if_info *mdio, + struct ethtool_cmd *ecmd) +{ + mdio45_ethtool_gset_npage(mdio, ecmd, 0, 0); +} + +extern int mdio_mii_ioctl(const struct mdio_if_info *mdio, + struct mii_ioctl_data *mii_data, int cmd); + +#endif /* __KERNEL__ */ #endif /* __LINUX_MDIO_H__ */ -- cgit v1.2.3 From 44c22ee91b56d7cad3b48c439dd96aad2e910fbc Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 29 Apr 2009 08:15:05 +0000 Subject: mii: Simplify mii_resolve_flowctrl_fdx() This is a shorter and more comprehensible formulation of the conditions for each flow control mode. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/linux/mii.h | 18 ++++++------------ 1 file changed, 6 insertions(+), 12 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mii.h b/include/linux/mii.h index ad748588faf1..14ecb2e114f1 100644 --- a/include/linux/mii.h +++ b/include/linux/mii.h @@ -250,18 +250,12 @@ static inline u8 mii_resolve_flowctrl_fdx(u16 lcladv, u16 rmtadv) { u8 cap = 0; - if (lcladv & ADVERTISE_PAUSE_CAP) { - if (lcladv & ADVERTISE_PAUSE_ASYM) { - if (rmtadv & LPA_PAUSE_CAP) - cap = FLOW_CTRL_TX | FLOW_CTRL_RX; - else if (rmtadv & LPA_PAUSE_ASYM) - cap = FLOW_CTRL_RX; - } else { - if (rmtadv & LPA_PAUSE_CAP) - cap = FLOW_CTRL_TX | FLOW_CTRL_RX; - } - } else if (lcladv & ADVERTISE_PAUSE_ASYM) { - if ((rmtadv & LPA_PAUSE_CAP) && (rmtadv & LPA_PAUSE_ASYM)) + if (lcladv & rmtadv & ADVERTISE_PAUSE_CAP) { + cap = FLOW_CTRL_TX | FLOW_CTRL_RX; + } else if (lcladv & rmtadv & ADVERTISE_PAUSE_ASYM) { + if (lcladv & ADVERTISE_PAUSE_CAP) + cap = FLOW_CTRL_RX; + else if (rmtadv & ADVERTISE_PAUSE_CAP) cap = FLOW_CTRL_TX; } -- cgit v1.2.3 From a8c30832b5b12e5d4e9d1c20cdac3cc2880e08b8 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 29 Apr 2009 08:19:03 +0000 Subject: mii: Add mii_advertise_flowctrl() This converts flow control capabilites to an advertising mask and can be useful in combination with mii_resolve_flowctrl_fdx(). Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/linux/mii.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mii.h b/include/linux/mii.h index 14ecb2e114f1..359fba880274 100644 --- a/include/linux/mii.h +++ b/include/linux/mii.h @@ -239,6 +239,22 @@ static inline unsigned int mii_duplex (unsigned int duplex_lock, return 0; } +/** + * mii_advertise_flowctrl - get flow control advertisement flags + * @cap: Flow control capabilities (FLOW_CTRL_RX, FLOW_CTRL_TX or both) + */ +static inline u16 mii_advertise_flowctrl(int cap) +{ + u16 adv = 0; + + if (cap & FLOW_CTRL_RX) + adv = ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; + if (cap & FLOW_CTRL_TX) + adv ^= ADVERTISE_PAUSE_ASYM; + + return adv; +} + /** * mii_resolve_flowctrl_fdx * @lcladv: value of MII ADVERTISE register -- cgit v1.2.3 From af2a3eac2fe6a6d8e9fdf6927284b34466a7d808 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 29 Apr 2009 08:19:36 +0000 Subject: mdio: Add mdio45_ethtool_spauseparam_an() This implements the ETHTOOL_SPAUSEPARAM operation for MDIO (clause 45) PHYs with auto-negotiation MMDs. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/linux/mdio.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mdio.h b/include/linux/mdio.h index ba41537eaa8a..5645c0f863dc 100644 --- a/include/linux/mdio.h +++ b/include/linux/mdio.h @@ -279,6 +279,9 @@ extern int mdio45_nway_restart(const struct mdio_if_info *mdio); extern void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio, struct ethtool_cmd *ecmd, u32 npage_adv, u32 npage_lpa); +extern void +mdio45_ethtool_spauseparam_an(const struct mdio_if_info *mdio, + const struct ethtool_pauseparam *ecmd); /** * mdio45_ethtool_gset - get settings for ETHTOOL_GSET -- cgit v1.2.3 From 0c09c1a49cc7b819b33566a49d9901f7cfdd6889 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 29 Apr 2009 08:21:53 +0000 Subject: ethtool/mdio: Report MDIO mode support and link partner advertising Add mdio_support and lp_advertising fields to ethtool_cmd. Set these in mdio45_ethtool_gset{,_npage}(). Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/linux/ethtool.h | 4 +++- include/linux/mdio.h | 5 +++-- 2 files changed, 6 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index 5ccb6bd660c7..14e6bc860112 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -26,11 +26,13 @@ struct ethtool_cmd { __u8 phy_address; __u8 transceiver; /* Which transceiver to use */ __u8 autoneg; /* Enable or disable autonegotiation */ + __u8 mdio_support; __u32 maxtxpkt; /* Tx pkts before generating tx int */ __u32 maxrxpkt; /* Rx pkts before generating rx int */ __u16 speed_hi; __u16 reserved2; - __u32 reserved[3]; + __u32 lp_advertising; /* Features the link partner advertises */ + __u32 reserved[2]; }; static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep, diff --git a/include/linux/mdio.h b/include/linux/mdio.h index 5645c0f863dc..1bff2f2d0e19 100644 --- a/include/linux/mdio.h +++ b/include/linux/mdio.h @@ -234,6 +234,9 @@ static inline __u16 mdio_phy_id_devad(int phy_id) return phy_id & MDIO_PHY_ID_DEVAD; } +#define MDIO_SUPPORTS_C22 1 +#define MDIO_SUPPORTS_C45 2 + #ifdef __KERNEL__ /** @@ -264,8 +267,6 @@ struct mdio_if_info { #define MDIO_PRTAD_NONE (-1) #define MDIO_DEVAD_NONE (-1) -#define MDIO_SUPPORTS_C22 1 -#define MDIO_SUPPORTS_C45 2 #define MDIO_EMULATE_C22 4 struct ethtool_cmd; -- cgit v1.2.3 From 894b19a6b343ce3589237167a56e6df0fe72ef0d Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 29 Apr 2009 08:25:57 +0000 Subject: ethtool/mdio: Support backplane mode negotiation Compile-tested only. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/linux/ethtool.h | 10 ++++++++++ include/linux/mdio.h | 5 +++++ 2 files changed, 15 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index 14e6bc860112..380b04272bf1 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -565,6 +565,11 @@ struct ethtool_ops { #define SUPPORTED_Pause (1 << 13) #define SUPPORTED_Asym_Pause (1 << 14) #define SUPPORTED_2500baseX_Full (1 << 15) +#define SUPPORTED_Backplane (1 << 16) +#define SUPPORTED_1000baseKX_Full (1 << 17) +#define SUPPORTED_10000baseKX4_Full (1 << 18) +#define SUPPORTED_10000baseKR_Full (1 << 19) +#define SUPPORTED_10000baseR_FEC (1 << 20) /* Indicates what features are advertised by the interface. */ #define ADVERTISED_10baseT_Half (1 << 0) @@ -583,6 +588,11 @@ struct ethtool_ops { #define ADVERTISED_Pause (1 << 13) #define ADVERTISED_Asym_Pause (1 << 14) #define ADVERTISED_2500baseX_Full (1 << 15) +#define ADVERTISED_Backplane (1 << 16) +#define ADVERTISED_1000baseKX_Full (1 << 17) +#define ADVERTISED_10000baseKX4_Full (1 << 18) +#define ADVERTISED_10000baseKR_Full (1 << 19) +#define ADVERTISED_10000baseR_FEC (1 << 20) /* The following are all involved in forcing a particular link * mode for the device for setting things. When getting the diff --git a/include/linux/mdio.h b/include/linux/mdio.h index 1bff2f2d0e19..26b4eb3bbee9 100644 --- a/include/linux/mdio.h +++ b/include/linux/mdio.h @@ -46,6 +46,7 @@ /* Media-dependent registers. */ #define MDIO_PMA_10GBT_TXPWR 131 /* 10GBASE-T TX power control */ +#define MDIO_PMA_10GBR_FECABLE 170 /* 10GBASE-R FEC ability */ #define MDIO_PCS_10GBX_STAT1 24 /* 10GBASE-X PCS status 1 */ #define MDIO_PCS_10GBRT_STAT1 32 /* 10GBASE-R/-T PCS status 1 */ #define MDIO_PCS_10GBRT_STAT2 33 /* 10GBASE-R/-T PCS status 2 */ @@ -187,6 +188,10 @@ /* PMA 10GBASE-T TX power register. */ #define MDIO_PMA_10GBT_TXPWR_SHORT 0x0001 /* Short-reach mode */ +/* PMA 10GBASE-R FEC ability register. */ +#define MDIO_PMA_10GBR_FECABLE_ABLE 0x0001 /* FEC ability */ +#define MDIO_PMA_10GBR_FECABLE_ERRABLE 0x0002 /* FEC error indic. ability */ + /* PCS 10GBASE-R/-T status register 1. */ #define MDIO_PCS_10GBRT_STAT1_BLKLK 0x0001 /* Block lock attained */ -- cgit v1.2.3 From f001fde5eadd915f4858d22ed70d7040f48767cf Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 5 May 2009 02:48:28 +0000 Subject: net: introduce a list of device addresses dev_addr_list (v6) v5 -> v6 (current): -removed so far unused static functions -corrected dev_addr_del_multiple to call del instead of add v4 -> v5: -added device address type (suggested by davem) -removed refcounting (better to have simplier code then safe potentially few bytes) v3 -> v4: -changed kzalloc to kmalloc in __hw_addr_add_ii() -ASSERT_RTNL() avoided in dev_addr_flush() and dev_addr_init() v2 -> v3: -removed unnecessary rcu read locking -moved dev_addr_flush() calling to ensure no null dereference of dev_addr v1 -> v2: -added forgotten ASSERT_RTNL to dev_addr_init and dev_addr_flush -removed unnecessary rcu_read locking in dev_addr_init -use compare_ether_addr_64bits instead of compare_ether_addr -use L1_CACHE_BYTES as size for allocating struct netdev_hw_addr -use call_rcu instead of rcu_synchronize -moved is_etherdev_addr into __KERNEL__ ifdef This patch introduces a new list in struct net_device and brings a set of functions to handle the work with device address list. The list is a replacement for the original dev_addr field and because in some situations there is need to carry several device addresses with the net device. To be backward compatible, dev_addr is made to point to the first member of the list so original drivers sees no difference. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- include/linux/etherdevice.h | 27 +++++++++++++++++++++++++++ include/linux/netdevice.h | 37 +++++++++++++++++++++++++++++++++++-- 2 files changed, 62 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h index a1f17abba7dc..3d7a6687d247 100644 --- a/include/linux/etherdevice.h +++ b/include/linux/etherdevice.h @@ -182,6 +182,33 @@ static inline unsigned compare_ether_addr_64bits(const u8 addr1[6+2], return compare_ether_addr(addr1, addr2); #endif } + +/** + * is_etherdev_addr - Tell if given Ethernet address belongs to the device. + * @dev: Pointer to a device structure + * @addr: Pointer to a six-byte array containing the Ethernet address + * + * Compare passed address with all addresses of the device. Return true if the + * address if one of the device addresses. + * + * Note that this function calls compare_ether_addr_64bits() so take care of + * the right padding. + */ +static inline bool is_etherdev_addr(const struct net_device *dev, + const u8 addr[6 + 2]) +{ + struct netdev_hw_addr *ha; + int res = 1; + + rcu_read_lock(); + for_each_dev_addr(dev, ha) { + res = compare_ether_addr_64bits(addr, ha->addr); + if (!res) + break; + } + rcu_read_unlock(); + return !res; +} #endif /* __KERNEL__ */ /** diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index ff42aba403c5..02882e2ebd49 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -210,6 +210,16 @@ struct dev_addr_list #define dmi_users da_users #define dmi_gusers da_gusers +struct netdev_hw_addr { + struct list_head list; + unsigned char addr[MAX_ADDR_LEN]; + unsigned char type; +#define NETDEV_HW_ADDR_T_LAN 1 +#define NETDEV_HW_ADDR_T_SAN 2 +#define NETDEV_HW_ADDR_T_SLAVE 3 + struct rcu_head rcu_head; +}; + struct hh_cache { struct hh_cache *hh_next; /* Next entry */ @@ -784,8 +794,11 @@ struct net_device */ unsigned long last_rx; /* Time of last Rx */ /* Interface address info used in eth_type_trans() */ - unsigned char dev_addr[MAX_ADDR_LEN]; /* hw address, (before bcast - because most packets are unicast) */ + unsigned char *dev_addr; /* hw address, (before bcast + because most packets are + unicast) */ + + struct list_head dev_addr_list; /* list of device hw addresses */ unsigned char broadcast[MAX_ADDR_LEN]; /* hw bcast add */ @@ -1791,6 +1804,13 @@ static inline void netif_addr_unlock_bh(struct net_device *dev) spin_unlock_bh(&dev->addr_list_lock); } +/* + * dev_addr_list walker. Should be used only for read access. Call with + * rcu_read_lock held. + */ +#define for_each_dev_addr(dev, ha) \ + list_for_each_entry_rcu(ha, &dev->dev_addr_list, list) + /* These functions live elsewhere (drivers/net/net_init.c, but related) */ extern void ether_setup(struct net_device *dev); @@ -1803,6 +1823,19 @@ extern struct net_device *alloc_netdev_mq(int sizeof_priv, const char *name, alloc_netdev_mq(sizeof_priv, name, setup, 1) extern int register_netdev(struct net_device *dev); extern void unregister_netdev(struct net_device *dev); + +/* Functions used for device addresses handling */ +extern int dev_addr_add(struct net_device *dev, unsigned char *addr, + unsigned char addr_type); +extern int dev_addr_del(struct net_device *dev, unsigned char *addr, + unsigned char addr_type); +extern int dev_addr_add_multiple(struct net_device *to_dev, + struct net_device *from_dev, + unsigned char addr_type); +extern int dev_addr_del_multiple(struct net_device *to_dev, + struct net_device *from_dev, + unsigned char addr_type); + /* Functions used for secondary unicast and multicast support */ extern void dev_set_rx_mode(struct net_device *dev); extern void __dev_set_rx_mode(struct net_device *dev); -- cgit v1.2.3 From 22cfbbfd9f67b67fe073010f51cb71d3632387d5 Mon Sep 17 00:00:00 2001 From: john stultz Date: Wed, 6 May 2009 11:43:57 +0200 Subject: ntp: adjust SHIFT_PLL to improve NTP convergence The conversion to the ntpv4 reference model f19923937321244e7dc334767eb4b67e0e3d5c74 ("ntp: convert to the NTP4 reference model") in 2.6.19 added nanosecond resolution the adjtimex interface, but also changed the "stiffness" of the frequency adjustments, causing NTP convergence time to greatly increase. SHIFT_PLL, which reduces the stiffness of the freq adjustments, was designed to be inversely linked to HZ, and the reference value of 4 was designed for Unix systems using HZ=100. However Linux's clock steering code mostly independent of HZ. So this patch reduces the SHIFT_PLL value from 4 to 2, which causes NTPd behavior to match kernels prior to 2.6.19, greatly reducing convergence times, and improving close synchronization through environmental thermal changes. The patch also changes some l's to L's in nearby code to avoid misreading 50l as 501. [ Impact: tweak NTP algorithm for faster convergence ] Signed-off-by: John Stultz Acked-by: Rik van Riel Cc: zippel@linux-m68k.org Signed-off-by: Andrew Morton LKML-Reference: <200905051956.n45JuVo9025575@imap1.linux-foundation.org> Signed-off-by: Ingo Molnar --- include/linux/timex.h | 42 +++++++++++++++++++++++++++++++----------- 1 file changed, 31 insertions(+), 11 deletions(-) (limited to 'include/linux') diff --git a/include/linux/timex.h b/include/linux/timex.h index aa3475fcff64..0daf9611ef4f 100644 --- a/include/linux/timex.h +++ b/include/linux/timex.h @@ -170,17 +170,37 @@ struct timex { #include /* - * SHIFT_KG and SHIFT_KF establish the damping of the PLL and are chosen - * for a slightly underdamped convergence characteristic. SHIFT_KH - * establishes the damping of the FLL and is chosen by wisdom and black - * art. + * SHIFT_PLL is used as a dampening factor to define how much we + * adjust the frequency correction for a given offset in PLL mode. + * It also used in dampening the offset correction, to define how + * much of the current value in time_offset we correct for each + * second. Changing this value changes the stiffness of the ntp + * adjustment code. A lower value makes it more flexible, reducing + * NTP convergence time. A higher value makes it stiffer, increasing + * convergence time, but making the clock more stable. * - * MAXTC establishes the maximum time constant of the PLL. With the - * SHIFT_KG and SHIFT_KF values given and a time constant range from - * zero to MAXTC, the PLL will converge in 15 minutes to 16 hours, - * respectively. + * In David Mills' nanokenrel reference implmentation SHIFT_PLL is 4. + * However this seems to increase convergence time much too long. + * + * https://lists.ntp.org/pipermail/hackers/2008-January/003487.html + * + * In the above mailing list discussion, it seems the value of 4 + * was appropriate for other Unix systems with HZ=100, and that + * SHIFT_PLL should be decreased as HZ increases. However, Linux's + * clock steering implementation is HZ independent. + * + * Through experimentation, a SHIFT_PLL value of 2 was found to allow + * for fast convergence (very similar to the NTPv3 code used prior to + * v2.6.19), with good clock stability. + * + * + * SHIFT_FLL is used as a dampening factor to define how much we + * adjust the frequency correction for a given offset in FLL mode. + * In David Mills' nanokenrel reference implmentation SHIFT_PLL is 2. + * + * MAXTC establishes the maximum time constant of the PLL. */ -#define SHIFT_PLL 4 /* PLL frequency factor (shift) */ +#define SHIFT_PLL 2 /* PLL frequency factor (shift) */ #define SHIFT_FLL 2 /* FLL frequency factor (shift) */ #define MAXTC 10 /* maximum time constant (shift) */ @@ -192,10 +212,10 @@ struct timex { #define SHIFT_USEC 16 /* frequency offset scale (shift) */ #define PPM_SCALE ((s64)NSEC_PER_USEC << (NTP_SCALE_SHIFT - SHIFT_USEC)) #define PPM_SCALE_INV_SHIFT 19 -#define PPM_SCALE_INV ((1ll << (PPM_SCALE_INV_SHIFT + NTP_SCALE_SHIFT)) / \ +#define PPM_SCALE_INV ((1LL << (PPM_SCALE_INV_SHIFT + NTP_SCALE_SHIFT)) / \ PPM_SCALE + 1) -#define MAXPHASE 500000000l /* max phase error (ns) */ +#define MAXPHASE 500000000L /* max phase error (ns) */ #define MAXFREQ 500000 /* max frequency error (ns/s) */ #define MAXFREQ_SCALED ((s64)MAXFREQ << NTP_SCALE_SHIFT) #define MINSEC 256 /* min interval between updates (s) */ -- cgit v1.2.3 From 2f01a1f58889fbfeb68b1bc1b52e4197f3333490 Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Wed, 29 Apr 2009 23:33:31 +0300 Subject: wl12xx: add driver wl12xx is a driver for TI wl1251 802.11 chipset designed for embedded devices, supporting both SDIO and SPI busses. Currently the driver supports only SPI. Adding support 1253 (the 5 GHz version) should be relatively easy. More information here: http://focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?contentId=4711&navigationId=12494&templateId=6123 (Collapsed original sequence of pre-merge patches into single commit for initial merge. -- JWL) Signed-off-by: Kalle Valo Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- include/linux/spi/wl12xx.h | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 include/linux/spi/wl12xx.h (limited to 'include/linux') diff --git a/include/linux/spi/wl12xx.h b/include/linux/spi/wl12xx.h new file mode 100644 index 000000000000..11430cab2aad --- /dev/null +++ b/include/linux/spi/wl12xx.h @@ -0,0 +1,31 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2009 Nokia Corporation + * + * Contact: Kalle Valo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef _LINUX_SPI_WL12XX_H +#define _LINUX_SPI_WL12XX_H + +struct wl12xx_platform_data { + void (*set_power)(bool enable); +}; + +#endif -- cgit v1.2.3 From 9dfd6ba353b993d648dcda72480c7ce92cd27c7e Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Wed, 6 May 2009 20:34:10 +0300 Subject: mac80211: Update SA Query transaction id length IEEE 802.11w/D8.0 changed the length of the SA Query transaction identifier from 16 to 2 octets. Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index c52e7fba4e40..dc92359f37e6 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -543,7 +543,7 @@ struct ieee80211_tim_ie { u8 virtual_map[1]; } __attribute__ ((packed)); -#define WLAN_SA_QUERY_TR_ID_LEN 16 +#define WLAN_SA_QUERY_TR_ID_LEN 2 struct ieee80211_mgmt { __le16 frame_control; -- cgit v1.2.3 From 4d5b78c055c76bb563c4a43d2adb92735b3b9405 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 6 May 2009 16:52:51 -0700 Subject: net: Add missing rculist.h include to netdevice.h Otherwise list_for_each_entry_rcu() et al. aren't visible and we get build failures in some configurations. Signed-off-by: David S. Miller --- include/linux/netdevice.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 02882e2ebd49..2af89b662cad 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -39,6 +39,7 @@ #include #include +#include #include #include -- cgit v1.2.3 From 08ce4c91e44d51bb6c946f2756825a462d53c545 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 7 Apr 2009 23:40:39 +0200 Subject: dlm: Make name input parameter of {,dlm_}new_lockspace() const | fs/gfs2/lock_dlm.c:207: warning: passing argument 1 of 'dlm_new_lockspace' discards qualifiers from pointer target type Signed-off-by: Geert Uytterhoeven Signed-off-by: David Teigland --- include/linux/dlm.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dlm.h b/include/linux/dlm.h index b9cd38603fd8..0b3518c42356 100644 --- a/include/linux/dlm.h +++ b/include/linux/dlm.h @@ -81,8 +81,8 @@ struct dlm_lksb { * the cluster, the calling node joins it. */ -int dlm_new_lockspace(char *name, int namelen, dlm_lockspace_t **lockspace, - uint32_t flags, int lvblen); +int dlm_new_lockspace(const char *name, int namelen, + dlm_lockspace_t **lockspace, uint32_t flags, int lvblen); /* * dlm_release_lockspace -- cgit v1.2.3 From dc6382ced07d6bad61d0b591fb12ab5da7ca632c Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Wed, 6 May 2009 22:09:37 +0300 Subject: nl80211 : Add support for configuring MFP NL80211_CMD_ASSOCIATE request must be able to indicate whether management frame protection (IEEE 802.11w) is being used. mac80211 was able to use MFP in client mode only with WEXT, but the new NL80211_ATTR_USE_MFP attribute will allow this to be done with nl80211, too. Since we are currently using nl80211 for MFP only with drivers that use user space SME, only MFP disabled and required values are used. However, the NL80211_ATTR_USE_MFP attribute is an enum that can be extended with MFP optional in the future, if that is needed with some drivers (e.g., if the RSN IE is generated by the driver). Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- include/linux/nl80211.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index e9fd13aa79f0..58c4ee1822d3 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -494,6 +494,11 @@ enum nl80211_commands { * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this * is used, e.g., with %NL80211_CMD_AUTHENTICATE event * + * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is + * used for the association (&enum nl80211_mfp, represented as a u32); + * this attribute can be used + * with %NL80211_CMD_ASSOCIATE request + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -596,6 +601,8 @@ enum nl80211_attrs { NL80211_ATTR_TIMED_OUT, + NL80211_ATTR_USE_MFP, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -1179,4 +1186,14 @@ enum nl80211_key_type { NL80211_KEYTYPE_PEERKEY, }; +/** + * enum nl80211_mfp - Management frame protection state + * @NL80211_MFP_NO: Management frame protection not used + * @NL80211_MFP_REQUIRED: Management frame protection required + */ +enum nl80211_mfp { + NL80211_MFP_NO, + NL80211_MFP_REQUIRED, +}; + #endif /* __LINUX_NL80211_H */ -- cgit v1.2.3 From 528769cf1e422d932052be1487459262f3d75333 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Mon, 11 May 2009 10:20:35 +0300 Subject: mac80211: Robust Action frame categories for MFP IEEE 802.11w/D9.0 introduces a mechanism for Action field Category values to be used to select which Action frames are Robust. Public and Vendor-specific categories are marked as not Robust in IEEE 802.11w; HT will be marked not Robust in IEEE 802.11n. A new Vendor-specific Protected category is allocated for Robust vendor-specific Action frames. Another new category, Protected Dual of Action, is introduced for protecting some existing Public Action frames (e.g., IEEE 802.11y protected enablement). Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index dc92359f37e6..05c29c01174c 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1068,8 +1068,12 @@ enum ieee80211_category { WLAN_CATEGORY_DLS = 2, WLAN_CATEGORY_BACK = 3, WLAN_CATEGORY_PUBLIC = 4, + WLAN_CATEGORY_HT = 7, WLAN_CATEGORY_SA_QUERY = 8, + WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION = 9, WLAN_CATEGORY_WMM = 17, + WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126, + WLAN_CATEGORY_VENDOR_SPECIFIC = 127, }; /* SPECTRUM_MGMT action code */ @@ -1261,7 +1265,9 @@ static inline bool ieee80211_is_robust_mgmt_frame(struct ieee80211_hdr *hdr) if (ieee80211_has_protected(hdr->frame_control)) return true; category = ((u8 *) hdr) + 24; - return *category != WLAN_CATEGORY_PUBLIC; + return *category != WLAN_CATEGORY_PUBLIC && + *category != WLAN_CATEGORY_HT && + *category != WLAN_CATEGORY_VENDOR_SPECIFIC; } return false; -- cgit v1.2.3 From e13cf6e04ebc231653e03ebde4799dc55bf62849 Mon Sep 17 00:00:00 2001 From: john stultz Date: Mon, 11 May 2009 18:13:13 -0700 Subject: ntp: fix comment typos Bernhard Schiffner noticed I had a few comment typos in this patch, (note: to save embarrassment, when making typos, avoid copying and pasting them) so this patch corrects them. [ Impact: cleanup ] Reported-by: Bernhard Schiffner Signed-off-by: John Stultz Cc: riel@redhat.com Cc: akpm@linux-foundation.org LKML-Reference: <1242090794.7214.131.camel@localhost.localdomain> Signed-off-by: Ingo Molnar --- include/linux/timex.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/timex.h b/include/linux/timex.h index 0daf9611ef4f..9910e3bd5b31 100644 --- a/include/linux/timex.h +++ b/include/linux/timex.h @@ -179,7 +179,7 @@ struct timex { * NTP convergence time. A higher value makes it stiffer, increasing * convergence time, but making the clock more stable. * - * In David Mills' nanokenrel reference implmentation SHIFT_PLL is 4. + * In David Mills' nanokernel reference implementation SHIFT_PLL is 4. * However this seems to increase convergence time much too long. * * https://lists.ntp.org/pipermail/hackers/2008-January/003487.html @@ -196,7 +196,7 @@ struct timex { * * SHIFT_FLL is used as a dampening factor to define how much we * adjust the frequency correction for a given offset in FLL mode. - * In David Mills' nanokenrel reference implmentation SHIFT_PLL is 2. + * In David Mills' nanokernel reference implementation SHIFT_FLL is 2. * * MAXTC establishes the maximum time constant of the PLL. */ -- cgit v1.2.3 From 597d0275736dad9c3bda6f0a00a1c477dc0f37b1 Mon Sep 17 00:00:00 2001 From: Arun R Bharadwaj Date: Thu, 16 Apr 2009 12:13:26 +0530 Subject: timers: Framework for identifying pinned timers * Arun R Bharadwaj [2009-04-16 12:11:36]: This patch creates a new framework for identifying cpu-pinned timers and hrtimers. This framework is needed because pinned timers are expected to fire on the same CPU on which they are queued. So it is essential to identify these and not migrate them, in case there are any. For regular timers, the currently existing add_timer_on() can be used queue pinned timers and subsequently mod_timer_pinned() can be used to modify the 'expires' field. For hrtimers, new modes HRTIMER_ABS_PINNED and HRTIMER_REL_PINNED are added to queue cpu-pinned hrtimer. [ tglx: use .._PINNED mode argument instead of creating tons of new functions ] Signed-off-by: Arun R Bharadwaj Signed-off-by: Thomas Gleixner --- include/linux/hrtimer.h | 7 +++++-- include/linux/timer.h | 3 +++ 2 files changed, 8 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index 0d2f7c8a33d6..7400900de94a 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -30,8 +30,11 @@ struct hrtimer_cpu_base; * Mode arguments of xxx_hrtimer functions: */ enum hrtimer_mode { - HRTIMER_MODE_ABS, /* Time value is absolute */ - HRTIMER_MODE_REL, /* Time value is relative to now */ + HRTIMER_MODE_ABS = 0x0, /* Time value is absolute */ + HRTIMER_MODE_REL = 0x1, /* Time value is relative to now */ + HRTIMER_MODE_PINNED = 0x02, /* Timer is bound to CPU */ + HRTIMER_MODE_ABS_PINNED = 0x02, + HRTIMER_MODE_REL_PINNED = 0x03, }; /* diff --git a/include/linux/timer.h b/include/linux/timer.h index 6cdb6f3331f1..ccf882eed8f8 100644 --- a/include/linux/timer.h +++ b/include/linux/timer.h @@ -163,7 +163,10 @@ extern void add_timer_on(struct timer_list *timer, int cpu); extern int del_timer(struct timer_list * timer); extern int mod_timer(struct timer_list *timer, unsigned long expires); extern int mod_timer_pending(struct timer_list *timer, unsigned long expires); +extern int mod_timer_pinned(struct timer_list *timer, unsigned long expires); +#define TIMER_NOT_PINNED 0 +#define TIMER_PINNED 1 /* * The jiffies value which is added to now, when there is no timer * in the timer wheel: -- cgit v1.2.3 From cd1bb94b4a0531e8211a3774f17de831f8285f76 Mon Sep 17 00:00:00 2001 From: Arun R Bharadwaj Date: Thu, 16 Apr 2009 12:15:34 +0530 Subject: timers: /proc/sys sysctl hook to enable timer migration * Arun R Bharadwaj [2009-04-16 12:11:36]: This patch creates the /proc/sys sysctl interface at /proc/sys/kernel/timer_migration Timer migration is enabled by default. To disable timer migration, when CONFIG_SCHED_DEBUG = y, echo 0 > /proc/sys/kernel/timer_migration Signed-off-by: Arun R Bharadwaj Signed-off-by: Thomas Gleixner --- include/linux/sched.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index b4c38bc8049c..618504010400 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1766,6 +1766,7 @@ extern unsigned int sysctl_sched_child_runs_first; extern unsigned int sysctl_sched_features; extern unsigned int sysctl_sched_migration_cost; extern unsigned int sysctl_sched_nr_migrate; +extern unsigned int sysctl_timer_migration; int sched_nr_latency_handler(struct ctl_table *table, int write, struct file *file, void __user *buffer, size_t *length, -- cgit v1.2.3 From eea08f32adb3f97553d49a4f79a119833036000a Mon Sep 17 00:00:00 2001 From: Arun R Bharadwaj Date: Thu, 16 Apr 2009 12:16:41 +0530 Subject: timers: Logic to move non pinned timers * Arun R Bharadwaj [2009-04-16 12:11:36]: This patch migrates all non pinned timers and hrtimers to the current idle load balancer, from all the idle CPUs. Timers firing on busy CPUs are not migrated. While migrating hrtimers, care should be taken to check if migrating a hrtimer would result in a latency or not. So we compare the expiry of the hrtimer with the next timer interrupt on the target cpu and migrate the hrtimer only if it expires *after* the next interrupt on the target cpu. So, added a clockevents_get_next_event() helper function to return the next_event on the target cpu's clock_event_device. [ tglx: cleanups and simplifications ] Signed-off-by: Arun R Bharadwaj Signed-off-by: Thomas Gleixner --- include/linux/clockchips.h | 9 +++++++++ include/linux/sched.h | 12 ++++++++++++ 2 files changed, 21 insertions(+) (limited to 'include/linux') diff --git a/include/linux/clockchips.h b/include/linux/clockchips.h index 3a1dbba4d3ae..20a100fe2b4f 100644 --- a/include/linux/clockchips.h +++ b/include/linux/clockchips.h @@ -143,3 +143,12 @@ extern void clockevents_notify(unsigned long reason, void *arg); #endif #endif + +#ifdef CONFIG_GENERIC_CLOCKEVENTS +extern ktime_t clockevents_get_next_event(int cpu); +#else +static inline ktime_t clockevents_get_next_event(int cpu) +{ + return (ktime_t) { .tv64 = KTIME_MAX }; +} +#endif diff --git a/include/linux/sched.h b/include/linux/sched.h index 618504010400..311dec123974 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -257,6 +257,7 @@ extern void task_rq_unlock_wait(struct task_struct *p); extern cpumask_var_t nohz_cpu_mask; #if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ) extern int select_nohz_load_balancer(int cpu); +extern int get_nohz_load_balancer(void); #else static inline int select_nohz_load_balancer(int cpu) { @@ -1772,6 +1773,17 @@ int sched_nr_latency_handler(struct ctl_table *table, int write, struct file *file, void __user *buffer, size_t *length, loff_t *ppos); #endif +#ifdef CONFIG_SCHED_DEBUG +static inline unsigned int get_sysctl_timer_migration(void) +{ + return sysctl_timer_migration; +} +#else +static inline unsigned int get_sysctl_timer_migration(void) +{ + return 1; +} +#endif extern unsigned int sysctl_sched_rt_period; extern int sysctl_sched_rt_runtime; -- cgit v1.2.3 From eccb8e8f0c3af47aeb6dbe4012eb8d4fc888767a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 11 May 2009 21:57:56 +0300 Subject: nl80211: improve station flags handling It is currently not possible to modify station flags, but that capability would be very useful. This patch introduces a new nl80211 attribute that contains a set/mask for station flags, and updates the internal API (and mac80211) to mirror that. The new attribute is parsed before falling back to the old so that userspace can specify both (if it can) to work on all kernels. Signed-off-by: Johannes Berg Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- include/linux/nl80211.h | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 58c4ee1822d3..aeefccfac0e1 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -25,6 +25,8 @@ * */ +#include + /** * DOC: Station handling * @@ -380,7 +382,7 @@ enum nl80211_commands { * * @NL80211_ATTR_STA_AID: Association ID for the station (u16) * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of - * &enum nl80211_sta_flags. + * &enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2) * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by * IEEE 802.11 7.3.1.6 (u16). * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported @@ -499,6 +501,9 @@ enum nl80211_commands { * this attribute can be used * with %NL80211_CMD_ASSOCIATE request * + * @NL80211_ATTR_STA_FLAGS2: Attribute containing a + * &struct nl80211_sta_flag_update. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -603,6 +608,8 @@ enum nl80211_attrs { NL80211_ATTR_USE_MFP, + NL80211_ATTR_STA_FLAGS2, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -691,6 +698,18 @@ enum nl80211_sta_flags { NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1 }; +/** + * struct nl80211_sta_flag_update - station flags mask/set + * @mask: mask of station flags to set + * @set: which values to set them to + * + * Both mask and set contain bits as per &enum nl80211_sta_flags. + */ +struct nl80211_sta_flag_update { + __u32 mask; + __u32 set; +} __attribute__((packed)); + /** * enum nl80211_rate_info - bitrate information * -- cgit v1.2.3 From 3f77316c6b99f596bfbf72c0542f47f7230b702e Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Mon, 11 May 2009 21:57:57 +0300 Subject: nl80211: Add IEEE 802.1X PAE control for station mode Add a new NL80211_ATTR_CONTROL_PORT flag for NL80211_CMD_ASSOCIATE to allow user space to indicate that it will control the IEEE 802.1X port in station mode. Previously, mac80211 was always marking the port authorized in station mode. This was enough when drop_unencrypted flag was set. However, drop_unencrypted can currently be controlled only with WEXT and the current nl80211 design does not allow fully secure configuration. Fix this by providing a mechanism for user space to control the IEEE 802.1X port in station mode (i.e., do the same that we are already doing in AP mode). Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- include/linux/nl80211.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index aeefccfac0e1..2781525b03d5 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -504,6 +504,13 @@ enum nl80211_commands { * @NL80211_ATTR_STA_FLAGS2: Attribute containing a * &struct nl80211_sta_flag_update. * + * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls + * IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in + * station mode. If the flag is included in %NL80211_CMD_ASSOCIATE + * request, the driver will assume that the port is unauthorized until + * authorized by user space. Otherwise, port is marked authorized by + * default in station mode. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -610,6 +617,8 @@ enum nl80211_attrs { NL80211_ATTR_STA_FLAGS2, + NL80211_ATTR_CONTROL_PORT, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.3 From faa8fdc85347cc76d87b43ea718785661c54f656 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Mon, 11 May 2009 21:57:58 +0300 Subject: nl80211: Add RSC configuration for new keys When setting a key with NL80211_CMD_NEW_KEY, we should allow the key sequence number (RSC) to be set in order to allow replay protection to work correctly for group keys. This patch documents this use for nl80211 and adds the couple of missing pieces in nl80211/cfg80211 and mac80211 to support this. In addition, WEXT SIOCSIWENCODEEXT compat processing in cfg80211 is extended to handle the RSC (this was already specified in WEXT, but just not implemented in cfg80211/mac80211). Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- include/linux/nl80211.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 2781525b03d5..dbea93b694e5 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -79,8 +79,8 @@ * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT, * %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD. * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA, - * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC and %NL80211_ATTR_KEY_CIPHER - * attributes. + * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER, + * and %NL80211_ATTR_KEY_SEQ attributes. * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX * or %NL80211_ATTR_MAC. * -- cgit v1.2.3 From 9fc20f030ba457d20eb994e1def7e2ce7d5ae1a8 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 14 May 2009 15:14:18 +0200 Subject: ALSA: ctxfi - Move PCI ID definitions to linux/pci_ids.h Signed-off-by: Takashi Iwai --- include/linux/pci_ids.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 06ba90c211a5..619153138986 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1314,6 +1314,13 @@ #define PCI_VENDOR_ID_CREATIVE 0x1102 /* duplicate: ECTIVA */ #define PCI_DEVICE_ID_CREATIVE_EMU10K1 0x0002 +#define PCI_DEVICE_ID_CREATIVE_20K1 0x0005 +#define PCI_DEVICE_ID_CREATIVE_20K2 0x000b +#define PCI_SUBDEVICE_ID_CREATIVE_SB0760 0x0024 +#define PCI_SUBDEVICE_ID_CREATIVE_SB08801 0x0041 +#define PCI_SUBDEVICE_ID_CREATIVE_SB08802 0x0042 +#define PCI_SUBDEVICE_ID_CREATIVE_SB08803 0x0043 +#define PCI_SUBDEVICE_ID_CREATIVE_HENDRIX 0x6000 #define PCI_VENDOR_ID_ECTIVA 0x1102 /* duplicate: CREATIVE */ #define PCI_DEVICE_ID_ECTIVA_EV1938 0x8938 -- cgit v1.2.3 From ca1b96e00ab5d1b0838965834469a0284c81a517 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 17 May 2009 19:12:21 +0200 Subject: ide: replace special_t typedef by IDE_SFLAG_* flags Replace: - special_t typedef by IDE_SFLAG_* flags - 'special_t special' ide_drive_t's field by 'u8 special_flags' one There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ide.h | 21 ++++++--------------- 1 file changed, 6 insertions(+), 15 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ide.h b/include/linux/ide.h index 34c128f0a33c..fc61328a4cdb 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -218,21 +218,12 @@ static inline void ide_std_init_ports(hw_regs_t *hw, /* * Special Driver Flags - * - * set_geometry : respecify drive geometry - * recalibrate : seek to cyl 0 - * set_multmode : set multmode count - * reserved : unused */ -typedef union { - unsigned all : 8; - struct { - unsigned set_geometry : 1; - unsigned recalibrate : 1; - unsigned set_multmode : 1; - unsigned reserved : 5; - } b; -} special_t; +enum { + IDE_SFLAG_SET_GEOMETRY = (1 << 0), + IDE_SFLAG_RECALIBRATE = (1 << 1), + IDE_SFLAG_SET_MULTMODE = (1 << 2), +}; /* * Status returned from various ide_ functions @@ -530,7 +521,7 @@ struct ide_drive_s { unsigned long sleep; /* sleep until this time */ unsigned long timeout; /* max time to wait for irq */ - special_t special; /* special action flags */ + u8 special_flags; /* special action flags */ u8 select; /* basic drive/head select reg value */ u8 retry_pio; /* retrying dma capable host in pio */ -- cgit v1.2.3 From 29e52cf793ded6bece50de50e738596f94f07d9f Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 17 May 2009 19:12:22 +0200 Subject: ide: remove chipset field from hw_regs_t * Convert host drivers that still use hw_regs_t's chipset field to use the one in struct ide_port_info instead. * Move special handling of ide_pci chipset type from ide_hw_configure() to ide_init_port(). * Remove chipset field from hw_regs_t. While at it: - remove stale comment in delkin_cb.c There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ide.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ide.h b/include/linux/ide.h index fc61328a4cdb..9652edbd26af 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -186,7 +186,6 @@ typedef struct hw_regs_s { int irq; /* our irq number */ ide_ack_intr_t *ack_intr; /* acknowledge interrupt */ - hwif_chipset_t chipset; struct device *dev, *parent; unsigned long config; } hw_regs_t; -- cgit v1.2.3 From dca3983059a4481e4ae97bbf0ac4b4c21429e1a5 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 17 May 2009 19:12:24 +0200 Subject: ide: pass number of ports to ide_host_{alloc,add}() (v2) Pass number of ports to ide_host_{alloc,add}() and then update all users accordingly. v2: - drop no longer needed NULL initializers in buddha.c, cmd640.c and gayle.c (noticed by Sergei) There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ide.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ide.h b/include/linux/ide.h index 9652edbd26af..a3cd568553d3 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1456,11 +1456,12 @@ void ide_undecoded_slave(ide_drive_t *); void ide_port_apply_params(ide_hwif_t *); int ide_sysfs_register_port(ide_hwif_t *); -struct ide_host *ide_host_alloc(const struct ide_port_info *, hw_regs_t **); +struct ide_host *ide_host_alloc(const struct ide_port_info *, hw_regs_t **, + unsigned int); void ide_host_free(struct ide_host *); int ide_host_register(struct ide_host *, const struct ide_port_info *, hw_regs_t **); -int ide_host_add(const struct ide_port_info *, hw_regs_t **, +int ide_host_add(const struct ide_port_info *, hw_regs_t **, unsigned int, struct ide_host **); void ide_host_remove(struct ide_host *); int ide_legacy_device_add(const struct ide_port_info *, unsigned long); -- cgit v1.2.3 From 9f36d31437922354d104a2db407f397e79e4027e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 17 May 2009 19:12:25 +0200 Subject: ide: remove hw_regs_t typedef Remove hw_regs_t typedef and rename struct hw_regs_s to struct ide_hw. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ide.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ide.h b/include/linux/ide.h index a3cd568553d3..b1b903a0dac8 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -178,7 +178,7 @@ typedef u8 hwif_chipset_t; /* * Structure to hold all information about the location of this port */ -typedef struct hw_regs_s { +struct ide_hw { union { struct ide_io_ports io_ports; unsigned long io_ports_array[IDE_NR_PORTS]; @@ -188,9 +188,9 @@ typedef struct hw_regs_s { ide_ack_intr_t *ack_intr; /* acknowledge interrupt */ struct device *dev, *parent; unsigned long config; -} hw_regs_t; +}; -static inline void ide_std_init_ports(hw_regs_t *hw, +static inline void ide_std_init_ports(struct ide_hw *hw, unsigned long io_addr, unsigned long ctl_addr) { @@ -1212,7 +1212,7 @@ static inline int ide_pci_is_in_compatibility_mode(struct pci_dev *dev) } void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *, - hw_regs_t *, hw_regs_t **); + struct ide_hw *, struct ide_hw **); void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *); #ifdef CONFIG_BLK_DEV_IDEDMA_PCI @@ -1456,12 +1456,12 @@ void ide_undecoded_slave(ide_drive_t *); void ide_port_apply_params(ide_hwif_t *); int ide_sysfs_register_port(ide_hwif_t *); -struct ide_host *ide_host_alloc(const struct ide_port_info *, hw_regs_t **, +struct ide_host *ide_host_alloc(const struct ide_port_info *, struct ide_hw **, unsigned int); void ide_host_free(struct ide_host *); int ide_host_register(struct ide_host *, const struct ide_port_info *, - hw_regs_t **); -int ide_host_add(const struct ide_port_info *, hw_regs_t **, unsigned int, + struct ide_hw **); +int ide_host_add(const struct ide_port_info *, struct ide_hw **, unsigned int, struct ide_host **); void ide_host_remove(struct ide_host *); int ide_legacy_device_add(const struct ide_port_info *, unsigned long); -- cgit v1.2.3 From 9d21493b4beb8f918ba248032fefa393074a5e2b Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 17 May 2009 20:55:16 -0700 Subject: net: tx scalability works : trans_start struct net_device trans_start field is a hot spot on SMP and high performance devices, particularly multi queues ones, because every transmitter dirties it. Is main use is tx watchdog and bonding alive checks. But as most devices dont use NETIF_F_LLTX, we have to lock a netdev_queue before calling their ndo_start_xmit(). So it makes sense to move trans_start from net_device to netdev_queue. Its update will occur on a already present (and in exclusive state) cache line, for free. We can do this transition smoothly. An old driver continue to update dev->trans_start, while an updated one updates txq->trans_start. Further patches could also put tx_bytes/tx_packets counters in netdev_queue to avoid dirtying dev->stats (vlan device comes to mind) Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/netdevice.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 2af89b662cad..cd547d04a8ce 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -470,6 +470,10 @@ struct netdev_queue { */ spinlock_t _xmit_lock ____cacheline_aligned_in_smp; int xmit_lock_owner; + /* + * please use this field instead of dev->trans_start + */ + unsigned long trans_start; } ____cacheline_aligned_in_smp; @@ -819,6 +823,11 @@ struct net_device * One part is mostly used on xmit path (device) */ /* These may be needed for future network-power-down code. */ + + /* + * trans_start here is expensive for high speed devices on SMP, + * please use netdev_queue->trans_start instead. + */ unsigned long trans_start; /* Time (in jiffies) of last Tx */ int watchdog_timeo; /* used by dev_watchdog() */ @@ -1541,6 +1550,8 @@ static inline int netif_carrier_ok(const struct net_device *dev) return !test_bit(__LINK_STATE_NOCARRIER, &dev->state); } +extern unsigned long dev_trans_start(struct net_device *dev); + extern void __netdev_watchdog_up(struct net_device *dev); extern void netif_carrier_on(struct net_device *dev); -- cgit v1.2.3 From f2a3e626202a87734a47153935ec9d15c7fcf761 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 15 May 2009 06:04:12 +0000 Subject: mdio: Add 10GBASE-T SNR register definition These do not have an in-kernel user but may be useful to user-space. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/linux/mdio.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mdio.h b/include/linux/mdio.h index 26b4eb3bbee9..825f1e2e2ec3 100644 --- a/include/linux/mdio.h +++ b/include/linux/mdio.h @@ -46,6 +46,8 @@ /* Media-dependent registers. */ #define MDIO_PMA_10GBT_TXPWR 131 /* 10GBASE-T TX power control */ +#define MDIO_PMA_10GBT_SNR 133 /* 10GBASE-T SNR margin, lane A. + * Lanes B-D are numbered 134-136. */ #define MDIO_PMA_10GBR_FECABLE 170 /* 10GBASE-R FEC ability */ #define MDIO_PCS_10GBX_STAT1 24 /* 10GBASE-X PCS status 1 */ #define MDIO_PCS_10GBRT_STAT1 32 /* 10GBASE-R/-T PCS status 1 */ @@ -188,6 +190,11 @@ /* PMA 10GBASE-T TX power register. */ #define MDIO_PMA_10GBT_TXPWR_SHORT 0x0001 /* Short-reach mode */ +/* PMA 10GBASE-T SNR registers. */ +/* Value is SNR margin in dB, clamped to range [-127, 127], plus 0x8000. */ +#define MDIO_PMA_10GBT_SNR_BIAS 0x8000 +#define MDIO_PMA_10GBT_SNR_MAX 127 + /* PMA 10GBASE-R FEC ability register. */ #define MDIO_PMA_10GBR_FECABLE_ABLE 0x0001 /* FEC ability */ #define MDIO_PMA_10GBR_FECABLE_ERRABLE 0x0002 /* FEC error indic. ability */ -- cgit v1.2.3 From e0b221bf4e07edf2fda645e457dc3c35c2f2f3a9 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 15 May 2009 06:05:49 +0000 Subject: mdio: Add XENPAK LASI register definitions These registers were originally defined for XENPAK modules, but are also implemented by many other 10G PHYs. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/linux/mdio.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mdio.h b/include/linux/mdio.h index 825f1e2e2ec3..56851646529a 100644 --- a/include/linux/mdio.h +++ b/include/linux/mdio.h @@ -55,6 +55,14 @@ #define MDIO_AN_10GBT_CTRL 32 /* 10GBASE-T auto-negotiation control */ #define MDIO_AN_10GBT_STAT 33 /* 10GBASE-T auto-negotiation status */ +/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */ +#define MDIO_PMA_LASI_RXCTRL 0x9000 /* RX_ALARM control */ +#define MDIO_PMA_LASI_TXCTRL 0x9001 /* TX_ALARM control */ +#define MDIO_PMA_LASI_CTRL 0x9002 /* LASI control */ +#define MDIO_PMA_LASI_RXSTAT 0x9003 /* RX_ALARM status */ +#define MDIO_PMA_LASI_TXSTAT 0x9004 /* TX_ALARM status */ +#define MDIO_PMA_LASI_STAT 0x9005 /* LASI status */ + /* Control register 1. */ /* Enable extended speed selection */ #define MDIO_CTRL1_SPEEDSELEXT (BMCR_SPEED1000 | BMCR_SPEED100) @@ -218,6 +226,26 @@ #define MDIO_AN_10GBT_STAT_MS 0x4000 /* Master/slave config */ #define MDIO_AN_10GBT_STAT_MSFLT 0x8000 /* Master/slave config fault */ +/* LASI RX_ALARM control/status registers. */ +#define MDIO_PMA_LASI_RX_PHYXSLFLT 0x0001 /* PHY XS RX local fault */ +#define MDIO_PMA_LASI_RX_PCSLFLT 0x0008 /* PCS RX local fault */ +#define MDIO_PMA_LASI_RX_PMALFLT 0x0010 /* PMA/PMD RX local fault */ +#define MDIO_PMA_LASI_RX_OPTICPOWERFLT 0x0020 /* RX optical power fault */ +#define MDIO_PMA_LASI_RX_WISLFLT 0x0200 /* WIS local fault */ + +/* LASI TX_ALARM control/status registers. */ +#define MDIO_PMA_LASI_TX_PHYXSLFLT 0x0001 /* PHY XS TX local fault */ +#define MDIO_PMA_LASI_TX_PCSLFLT 0x0008 /* PCS TX local fault */ +#define MDIO_PMA_LASI_TX_PMALFLT 0x0010 /* PMA/PMD TX local fault */ +#define MDIO_PMA_LASI_TX_LASERPOWERFLT 0x0080 /* Laser output power fault */ +#define MDIO_PMA_LASI_TX_LASERTEMPFLT 0x0100 /* Laser temperature fault */ +#define MDIO_PMA_LASI_TX_LASERBICURRFLT 0x0200 /* Laser bias current fault */ + +/* LASI control/status registers. */ +#define MDIO_PMA_LASI_LSALARM 0x0001 /* LS_ALARM enable/status */ +#define MDIO_PMA_LASI_TXALARM 0x0002 /* TX_ALARM enable/status */ +#define MDIO_PMA_LASI_RXALARM 0x0004 /* RX_ALARM enable/status */ + /* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */ #define MDIO_PHY_ID_C45 0x8000 -- cgit v1.2.3 From 7004bf252c53da18f6b55103e0c92f777f846806 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 18 May 2009 00:34:33 +0000 Subject: net: add tx_packets/tx_bytes/tx_dropped counters in struct netdev_queue offsetof(struct net_device, features)=0x44 offsetof(struct net_device, stats.tx_packets)=0x54 offsetof(struct net_device, stats.tx_bytes)=0x5c offsetof(struct net_device, stats.tx_dropped)=0x6c Network drivers that touch dev->stats.tx_packets/stats.tx_bytes in their tx path can slow down SMP operations, since they dirty a cache line that should stay shared (dev->features is needed in rx and tx paths) We could move away stats field in net_device but it wont help that much. (Two cache lines dirtied in tx path, we can do one only) Better solution is to add tx_packets/tx_bytes/tx_dropped in struct netdev_queue because this structure is already touched in tx path and counters updates will then be free (no increase in size) Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/netdevice.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index cd547d04a8ce..f8574e76b743 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -474,6 +474,9 @@ struct netdev_queue { * please use this field instead of dev->trans_start */ unsigned long trans_start; + unsigned long tx_bytes; + unsigned long tx_packets; + unsigned long tx_dropped; } ____cacheline_aligned_in_smp; -- cgit v1.2.3 From 39549eef3587f1c1e8c65c88a2400d10fd30ea17 Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Fri, 15 May 2009 23:39:29 +0000 Subject: can: CAN Network device driver and Netlink interface The CAN network device driver interface provides a generic interface to setup, configure and monitor CAN network devices. It exports a set of common data structures and functions, which all real CAN network device drivers should use. Please have a look to the SJA1000 or MSCAN driver to understand how to use them. The name of the module is can-dev.ko. Furthermore, it adds a Netlink interface allowing to configure the CAN device using the program "ip" from the iproute2 utility suite. For further information please check "Documentation/networking/can.txt" Signed-off-by: Wolfgang Grandegger Signed-off-by: Oliver Hartkopp Signed-off-by: David S. Miller --- include/linux/can/Kbuild | 1 + include/linux/can/dev.h | 70 +++++++++++++++++++++++++++ include/linux/can/netlink.h | 113 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 184 insertions(+) create mode 100644 include/linux/can/dev.h create mode 100644 include/linux/can/netlink.h (limited to 'include/linux') diff --git a/include/linux/can/Kbuild b/include/linux/can/Kbuild index eff898aac02b..8cb05aae661c 100644 --- a/include/linux/can/Kbuild +++ b/include/linux/can/Kbuild @@ -1,3 +1,4 @@ header-y += raw.h header-y += bcm.h header-y += error.h +header-y += netlink.h diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h new file mode 100644 index 000000000000..4a37a56f6cdd --- /dev/null +++ b/include/linux/can/dev.h @@ -0,0 +1,70 @@ +/* + * linux/can/dev.h + * + * Definitions for the CAN network device driver interface + * + * Copyright (C) 2006 Andrey Volkov + * Varma Electronics Oy + * + * Copyright (C) 2008 Wolfgang Grandegger + * + * Send feedback to + */ + +#ifndef CAN_DEV_H +#define CAN_DEV_H + +#include +#include + +/* + * CAN mode + */ +enum can_mode { + CAN_MODE_STOP = 0, + CAN_MODE_START, + CAN_MODE_SLEEP +}; + +/* + * CAN common private data + */ +#define CAN_ECHO_SKB_MAX 4 + +struct can_priv { + struct can_device_stats can_stats; + + struct can_bittiming bittiming; + struct can_bittiming_const *bittiming_const; + struct can_clock clock; + + enum can_state state; + u32 ctrlmode; + + int restart_ms; + struct timer_list restart_timer; + + struct sk_buff *echo_skb[CAN_ECHO_SKB_MAX]; + + int (*do_set_bittiming)(struct net_device *dev); + int (*do_set_mode)(struct net_device *dev, enum can_mode mode); + int (*do_get_state)(const struct net_device *dev, + enum can_state *state); +}; + +struct net_device *alloc_candev(int sizeof_priv); +void free_candev(struct net_device *dev); + +int open_candev(struct net_device *dev); +void close_candev(struct net_device *dev); + +int register_candev(struct net_device *dev); +void unregister_candev(struct net_device *dev); + +int can_restart_now(struct net_device *dev); +void can_bus_off(struct net_device *dev); + +void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev, int idx); +void can_get_echo_skb(struct net_device *dev, int idx); + +#endif /* CAN_DEV_H */ diff --git a/include/linux/can/netlink.h b/include/linux/can/netlink.h new file mode 100644 index 000000000000..9ecbb7871c0e --- /dev/null +++ b/include/linux/can/netlink.h @@ -0,0 +1,113 @@ +/* + * linux/can/netlink.h + * + * Definitions for the CAN netlink interface + * + * Copyright (c) 2009 Wolfgang Grandegger + * + * Send feedback to + * + */ + +#ifndef CAN_NETLINK_H +#define CAN_NETLINK_H + +#include + +/* + * CAN bit-timing parameters + * + * For futher information, please read chapter "8 BIT TIMING + * REQUIREMENTS" of the "Bosch CAN Specification version 2.0" + * at http://www.semiconductors.bosch.de/pdf/can2spec.pdf. + */ +struct can_bittiming { + __u32 bitrate; /* Bit-rate in bits/second */ + __u32 sample_point; /* Sample point in one-tenth of a percent */ + __u32 tq; /* Time quanta (TQ) in nanoseconds */ + __u32 prop_seg; /* Propagation segment in TQs */ + __u32 phase_seg1; /* Phase buffer segment 1 in TQs */ + __u32 phase_seg2; /* Phase buffer segment 2 in TQs */ + __u32 sjw; /* Synchronisation jump width in TQs */ + __u32 brp; /* Bit-rate prescaler */ +}; + +/* + * CAN harware-dependent bit-timing constant + * + * Used for calculating and checking bit-timing parameters + */ +struct can_bittiming_const { + char name[16]; /* Name of the CAN controller hardware */ + __u32 tseg1_min; /* Time segement 1 = prop_seg + phase_seg1 */ + __u32 tseg1_max; + __u32 tseg2_min; /* Time segement 2 = phase_seg2 */ + __u32 tseg2_max; + __u32 sjw_max; /* Synchronisation jump width */ + __u32 brp_min; /* Bit-rate prescaler */ + __u32 brp_max; + __u32 brp_inc; +}; + +/* + * CAN clock parameters + */ +struct can_clock { + __u32 freq; /* CAN system clock frequency in Hz */ +}; + +/* + * CAN operational and error states + */ +enum can_state { + CAN_STATE_ERROR_ACTIVE = 0, /* RX/TX error count < 96 */ + CAN_STATE_ERROR_WARNING, /* RX/TX error count < 128 */ + CAN_STATE_ERROR_PASSIVE, /* RX/TX error count < 256 */ + CAN_STATE_BUS_OFF, /* RX/TX error count >= 256 */ + CAN_STATE_STOPPED, /* Device is stopped */ + CAN_STATE_SLEEPING, /* Device is sleeping */ + CAN_STATE_MAX +}; + +/* + * CAN controller mode + */ +struct can_ctrlmode { + __u32 mask; + __u32 flags; +}; + +#define CAN_CTRLMODE_LOOPBACK 0x1 /* Loopback mode */ +#define CAN_CTRLMODE_LISTENONLY 0x2 /* Listen-only mode */ +#define CAN_CTRLMODE_3_SAMPLES 0x4 /* Triple sampling mode */ + +/* + * CAN device statistics + */ +struct can_device_stats { + __u32 bus_error; /* Bus errors */ + __u32 error_warning; /* Changes to error warning state */ + __u32 error_passive; /* Changes to error passive state */ + __u32 bus_off; /* Changes to bus off state */ + __u32 arbitration_lost; /* Arbitration lost errors */ + __u32 restarts; /* CAN controller re-starts */ +}; + +/* + * CAN netlink interface + */ +enum { + IFLA_CAN_UNSPEC, + IFLA_CAN_BITTIMING, + IFLA_CAN_BITTIMING_CONST, + IFLA_CAN_CLOCK, + IFLA_CAN_STATE, + IFLA_CAN_CTRLMODE, + IFLA_CAN_RESTART_MS, + IFLA_CAN_RESTART, + __IFLA_CAN_MAX +}; + +#define IFLA_CAN_MAX (__IFLA_CAN_MAX - 1) + +#endif /* CAN_NETLINK_H */ -- cgit v1.2.3 From f534e52f091a7b9f51fb6726710bdf731b663e94 Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Fri, 15 May 2009 23:39:31 +0000 Subject: can: SJA1000 generic platform bus driver This driver adds support for the SJA1000 chips connected to the "platform bus", which can be found on various embedded systems. Signed-off-by: Sascha Hauer Signed-off-by: Wolfgang Grandegger Signed-off-by: Marc Kleine-Budde Signed-off-by: Oliver Hartkopp Signed-off-by: David S. Miller --- include/linux/can/platform/sja1000.h | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) create mode 100644 include/linux/can/platform/sja1000.h (limited to 'include/linux') diff --git a/include/linux/can/platform/sja1000.h b/include/linux/can/platform/sja1000.h new file mode 100644 index 000000000000..37966e630ff5 --- /dev/null +++ b/include/linux/can/platform/sja1000.h @@ -0,0 +1,32 @@ +#ifndef _CAN_PLATFORM_SJA1000_H_ +#define _CAN_PLATFORM_SJA1000_H_ + +/* clock divider register */ +#define CDR_CLKOUT_MASK 0x07 +#define CDR_CLK_OFF 0x08 /* Clock off (CLKOUT pin) */ +#define CDR_RXINPEN 0x20 /* TX1 output is RX irq output */ +#define CDR_CBP 0x40 /* CAN input comparator bypass */ +#define CDR_PELICAN 0x80 /* PeliCAN mode */ + +/* output control register */ +#define OCR_MODE_BIPHASE 0x00 +#define OCR_MODE_TEST 0x01 +#define OCR_MODE_NORMAL 0x02 +#define OCR_MODE_CLOCK 0x03 +#define OCR_TX0_INVERT 0x04 +#define OCR_TX0_PULLDOWN 0x08 +#define OCR_TX0_PULLUP 0x10 +#define OCR_TX0_PUSHPULL 0x18 +#define OCR_TX1_INVERT 0x20 +#define OCR_TX1_PULLDOWN 0x40 +#define OCR_TX1_PULLUP 0x80 +#define OCR_TX1_PUSHPULL 0xc0 + +struct sja1000_platform_data { + u32 clock; /* CAN bus oscillator frequency in Hz */ + + u8 ocr; /* output control register */ + u8 cdr; /* clock divider register */ +}; + +#endif /* !_CAN_PLATFORM_SJA1000_H_ */ -- cgit v1.2.3 From 69e3c75f4d541a6eb151b3ef91f34033cb3ad6e1 Mon Sep 17 00:00:00 2001 From: Johann Baudy Date: Mon, 18 May 2009 22:11:22 -0700 Subject: net: TX_RING and packet mmap New packet socket feature that makes packet socket more efficient for transmission. - It reduces number of system call through a PACKET_TX_RING mechanism, based on PACKET_RX_RING (Circular buffer allocated in kernel space which is mmapped from user space). - It minimizes CPU copy using fragmented SKB (almost zero copy). Signed-off-by: Johann Baudy Signed-off-by: David S. Miller --- include/linux/if_packet.h | 20 +++++++++++++++----- include/linux/skbuff.h | 3 +++ 2 files changed, 18 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/if_packet.h b/include/linux/if_packet.h index 18db0668065a..5b2badeb9497 100644 --- a/include/linux/if_packet.h +++ b/include/linux/if_packet.h @@ -46,6 +46,8 @@ struct sockaddr_ll #define PACKET_VERSION 10 #define PACKET_HDRLEN 11 #define PACKET_RESERVE 12 +#define PACKET_TX_RING 13 +#define PACKET_LOSS 14 struct tpacket_stats { @@ -63,14 +65,22 @@ struct tpacket_auxdata __u16 tp_vlan_tci; }; +/* Rx ring - header status */ +#define TP_STATUS_KERNEL 0x0 +#define TP_STATUS_USER 0x1 +#define TP_STATUS_COPY 0x2 +#define TP_STATUS_LOSING 0x4 +#define TP_STATUS_CSUMNOTREADY 0x8 + +/* Tx ring - header status */ +#define TP_STATUS_AVAILABLE 0x0 +#define TP_STATUS_SEND_REQUEST 0x1 +#define TP_STATUS_SENDING 0x2 +#define TP_STATUS_WRONG_FORMAT 0x4 + struct tpacket_hdr { unsigned long tp_status; -#define TP_STATUS_KERNEL 0 -#define TP_STATUS_USER 1 -#define TP_STATUS_COPY 2 -#define TP_STATUS_LOSING 4 -#define TP_STATUS_CSUMNOTREADY 8 unsigned int tp_len; unsigned int tp_snaplen; unsigned short tp_mac; diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 1b5c3d298f43..aff494ba6a31 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -203,6 +203,9 @@ struct skb_shared_info { #ifdef CONFIG_HAS_DMA dma_addr_t dma_maps[MAX_SKB_FRAGS + 1]; #endif + /* Intermediate layers must ensure that destructor_arg + * remains valid until skb destructor */ + void * destructor_arg; }; /* We divide dataref into two halves. The higher 16 bits hold references -- cgit v1.2.3 From 690cc3ffe33ac4a2857583c22d4c6244ae11684d Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 13 May 2009 16:55:10 +0000 Subject: syscall: Implement a convinience function restart_syscall Currently when we have a signal pending we have the functionality to restart that the current system call. There are other cases such as nasty lock ordering issues where it makes sense to have a simple fix that uses try lock and restarts the system call. Buying time to figure out how to rework the locking strategy. Signed-off-by: Eric W. Biederman Signed-off-by: David S. Miller --- include/linux/sched.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index b4c38bc8049c..d853f6bb0baf 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2178,6 +2178,12 @@ static inline int test_tsk_need_resched(struct task_struct *tsk) return unlikely(test_tsk_thread_flag(tsk,TIF_NEED_RESCHED)); } +static inline int restart_syscall(void) +{ + set_tsk_thread_flag(current, TIF_SIGPENDING); + return -ERESTARTNOINTR; +} + static inline int signal_pending(struct task_struct *p) { return unlikely(test_tsk_thread_flag(p,TIF_SIGPENDING)); -- cgit v1.2.3 From 93f154b594fe47e4a7e5358b309add449a046cd3 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 18 May 2009 22:19:19 -0700 Subject: net: release dst entry in dev_hard_start_xmit() One point of contention in high network loads is the dst_release() performed when a transmited skb is freed. This is because NIC tx completion calls dev_kree_skb() long after original call to dev_queue_xmit(skb). CPU cache is cold and the atomic op in dst_release() stalls. On SMP, this is quite visible if one CPU is 100% handling softirqs for a network device, since dst_clone() is done by other cpus, involving cache line ping pongs. It seems right place to release dst is in dev_hard_start_xmit(), for most devices but ones that are virtual, and some exceptions. David Miller suggested to define a new device flag, set in alloc_netdev_mq() (so that most devices set it at init time), and carefuly unset in devices which dont want a NULL skb->dst in their ndo_start_xmit(). List of devices that must clear this flag is : - loopback device, because it calls netif_rx() and quoting Patrick : "ip_route_input() doesn't accept loopback addresses, so loopback packets already need to have a dst_entry attached." - appletalk/ipddp.c : needs skb->dst in its xmit function - And all devices that call again dev_queue_xmit() from their xmit function (as some classifiers need skb->dst) : bonding, vlan, macvlan, eql, ifb, hdlc_fr Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/if.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/if.h b/include/linux/if.h index 1108f3e099e3..b9a6229f3be7 100644 --- a/include/linux/if.h +++ b/include/linux/if.h @@ -67,6 +67,9 @@ #define IFF_ISATAP 0x80 /* ISATAP interface (RFC4214) */ #define IFF_MASTER_ARPMON 0x100 /* bonding master, ARP mon in use */ #define IFF_WAN_HDLC 0x200 /* WAN HDLC device */ +#define IFF_XMIT_DST_RELEASE 0x400 /* dev_hard_start_xmit() is allowed to + * release skb->dst + */ #define IF_GET_IFACE 0x0001 /* for querying only */ #define IF_GET_PROTO 0x0002 -- cgit v1.2.3 From bfa568d19a3faed3b94978ad48ac15d1b0d7e5bc Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Sat, 2 May 2009 06:16:47 +0400 Subject: powerpc/85xx: Add PCI IDs for MPC8569 family processors This patch adds PCI IDs for MPC8569 and MPC8569E processors, plus adds appropriate quirks for these IDs, and thus makes PCI-E actually work on MPC8569E-MDS boards. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- include/linux/pci_ids.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 06ba90c211a5..7cc5b80327f8 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2274,6 +2274,8 @@ #define PCI_DEVICE_ID_MPC8547E 0x0018 #define PCI_DEVICE_ID_MPC8545E 0x0019 #define PCI_DEVICE_ID_MPC8545 0x001a +#define PCI_DEVICE_ID_MPC8569E 0x0061 +#define PCI_DEVICE_ID_MPC8569 0x0060 #define PCI_DEVICE_ID_MPC8568E 0x0020 #define PCI_DEVICE_ID_MPC8568 0x0021 #define PCI_DEVICE_ID_MPC8567E 0x0022 -- cgit v1.2.3 From 01af9507ff36578dad89b1cc88ff37ac18e719cb Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 15 Apr 2009 14:38:40 -0500 Subject: powerpc/85xx: Add P2020DS board support The P2020 is a dual e500v2 core based SOC with: * 3 PCIe controllers * 2 General purpose DMA controllers * 2 sRIO controllers * 3 eTSECS * USB 2.0 * SDHC * SPI, I2C, DUART * enhanced localbus * and optional Security (P2020E) security w/XOR acceleration The p2020 DS reference board is pretty similar to the existing MPC85xx DS boards and has a ULI 1575 connected on one of the PCIe controllers. Signed-off-by: Ted Peters Signed-off-by: Kumar Gala --- include/linux/pci_ids.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 7cc5b80327f8..bfa0402d3434 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2288,6 +2288,8 @@ #define PCI_DEVICE_ID_MPC8572 0x0041 #define PCI_DEVICE_ID_MPC8536E 0x0050 #define PCI_DEVICE_ID_MPC8536 0x0051 +#define PCI_DEVICE_ID_P2020E 0x0070 +#define PCI_DEVICE_ID_P2020 0x0071 #define PCI_DEVICE_ID_MPC8641 0x7010 #define PCI_DEVICE_ID_MPC8641D 0x7011 #define PCI_DEVICE_ID_MPC8610 0x7018 -- cgit v1.2.3 From 645069299a1c7358cf7330afe293f07552f11a5d Mon Sep 17 00:00:00 2001 From: Sascha Hlusiak Date: Tue, 19 May 2009 12:56:52 +0000 Subject: sit: stateless autoconf for isatap be sent periodically. The rs_delay can be speficied when adding the PRL entry and defaults to 15 minutes. The RS is sent from every link local adress that's assigned to the tunnel interface. It's directed to the (guessed) linklocal address of the router and is sent through the tunnel. Better: send to ff02::2 encapsuled in unicast directed to router-v4. Signed-off-by: Sascha Hlusiak Signed-off-by: David S. Miller --- include/linux/if_tunnel.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/if_tunnel.h b/include/linux/if_tunnel.h index 5a9aae4adb44..5eb9b0f857e0 100644 --- a/include/linux/if_tunnel.h +++ b/include/linux/if_tunnel.h @@ -44,7 +44,7 @@ struct ip_tunnel_prl { __u16 flags; __u16 __reserved; __u32 datalen; - __u32 __reserved2; + __u32 rs_delay; /* data follows */ }; -- cgit v1.2.3 From 89f536ccfa8b370ff4d054f4061858ca9322c25a Mon Sep 17 00:00:00 2001 From: Stephane Chatty Date: Wed, 20 May 2009 15:41:24 +0200 Subject: HID: add new multitouch and digitizer contants Added constants to hid.h for all digitizer usages (including the new multitouch ones that are not yet in the official USB spec but are being pushed by Microsft as described in their paper "Digitizer Drivers for Windows Touch and Pen-Based Computers"). Updated hid-debug.c to support the new MT input constants such as ABS_MT_POSITION_X. Signed-off-by: Stephane Chatty Signed-off-by: Jiri Kosina --- include/linux/hid.h | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) (limited to 'include/linux') diff --git a/include/linux/hid.h b/include/linux/hid.h index a72876e43589..53489fd4d700 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -238,6 +238,42 @@ struct hid_item { #define HID_GD_RIGHT 0x00010092 #define HID_GD_LEFT 0x00010093 +#define HID_DG_DIGITIZER 0x000d0001 +#define HID_DG_PEN 0x000d0002 +#define HID_DG_LIGHTPEN 0x000d0003 +#define HID_DG_TOUCHSCREEN 0x000d0004 +#define HID_DG_TOUCHPAD 0x000d0005 +#define HID_DG_STYLUS 0x000d0020 +#define HID_DG_PUCK 0x000d0021 +#define HID_DG_FINGER 0x000d0022 +#define HID_DG_TIPPRESSURE 0x000d0030 +#define HID_DG_BARRELPRESSURE 0x000d0031 +#define HID_DG_INRANGE 0x000d0032 +#define HID_DG_TOUCH 0x000d0033 +#define HID_DG_UNTOUCH 0x000d0034 +#define HID_DG_TAP 0x000d0035 +#define HID_DG_TABLETFUNCTIONKEY 0x000d0039 +#define HID_DG_PROGRAMCHANGEKEY 0x000d003a +#define HID_DG_INVERT 0x000d003c +#define HID_DG_TIPSWITCH 0x000d0042 +#define HID_DG_TIPSWITCH2 0x000d0043 +#define HID_DG_BARRELSWITCH 0x000d0044 +#define HID_DG_ERASER 0x000d0045 +#define HID_DG_TABLETPICK 0x000d0046 +/* + * as of May 20, 2009 the usages below are not yet in the official USB spec + * but are being pushed by Microsft as described in their paper "Digitizer + * Drivers for Windows Touch and Pen-Based Computers" + */ +#define HID_DG_CONFIDENCE 0x000d0047 +#define HID_DG_WIDTH 0x000d0048 +#define HID_DG_HEIGHT 0x000d0049 +#define HID_DG_CONTACTID 0x000d0051 +#define HID_DG_INPUTMODE 0x000d0052 +#define HID_DG_DEVICEINDEX 0x000d0053 +#define HID_DG_CONTACTCOUNT 0x000d0054 +#define HID_DG_CONTACTMAX 0x000d0055 + /* * HID report types --- Ouch! HID spec says 1 2 3! */ -- cgit v1.2.3 From d95ed9275edcb8995bda31005bb3f55e087626d7 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Tue, 19 May 2009 18:27:17 +0000 Subject: af_packet: Teach to listen for multiple unicast addresses. The the PACKET_ADD_MEMBERSHIP and the PACKET_DROP_MEMBERSHIP setsockopt calls for af_packet already has all of the infrastructure needed to subscribe to multiple mac addresses. All that is missing is a flag to say that the address we want to listen on is a unicast address. So introduce PACKET_MR_UNICAST and wire it up to dev_unicast_add and dev_unicast_delete. Additionally I noticed that errors from dev_mc_add were not propagated from packet_dev_mc so fix that. Signed-off-by: Eric W. Biederman Signed-off-by: David S. Miller --- include/linux/if_packet.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/if_packet.h b/include/linux/if_packet.h index 5b2badeb9497..dea7d6b7cf98 100644 --- a/include/linux/if_packet.h +++ b/include/linux/if_packet.h @@ -145,5 +145,6 @@ struct packet_mreq #define PACKET_MR_MULTICAST 0 #define PACKET_MR_PROMISC 1 #define PACKET_MR_ALLMULTI 2 +#define PACKET_MR_UNICAST 3 #endif -- cgit v1.2.3 From 4ea7e38696c7e798c47ebbecadfd392f23f814f9 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Thu, 21 May 2009 07:36:08 +0000 Subject: dropmon: add ability to detect when hardware dropsrxpackets Patch to add the ability to detect drops in hardware interfaces via dropwatch. Adds a tracepoint to net_rx_action to signal everytime a napi instance is polled. The dropmon code then periodically checks to see if the rx_frames counter has changed, and if so, adds a drop notification to the netlink protocol, using the reserved all-0's vector to indicate the drop location was in hardware, rather than somewhere in the code. Signed-off-by: Neil Horman include/linux/net_dropmon.h | 8 ++ include/trace/napi.h | 11 +++ net/core/dev.c | 5 + net/core/drop_monitor.c | 124 ++++++++++++++++++++++++++++++++++++++++++-- net/core/net-traces.c | 4 + net/core/netpoll.c | 2 6 files changed, 149 insertions(+), 5 deletions(-) Signed-off-by: David S. Miller --- include/linux/net_dropmon.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/net_dropmon.h b/include/linux/net_dropmon.h index 0217fb81a630..e8a8b5c50ed0 100644 --- a/include/linux/net_dropmon.h +++ b/include/linux/net_dropmon.h @@ -2,12 +2,20 @@ #define __NET_DROPMON_H #include +#include struct net_dm_drop_point { __u8 pc[8]; __u32 count; }; +#define is_drop_point_hw(x) do {\ + int ____i, ____j;\ + for (____i = 0; ____i < 8; i ____i++)\ + ____j |= x[____i];\ + ____j;\ +} while (0) + #define NET_DM_CFG_VERSION 0 #define NET_DM_CFG_ALERT_COUNT 1 #define NET_DM_CFG_ALERT_DELAY 2 -- cgit v1.2.3 From e31a16d6f64ef0e324c6f54d5112703c3f13a9c4 Mon Sep 17 00:00:00 2001 From: Zhu Yi Date: Thu, 21 May 2009 21:47:03 +0800 Subject: wireless: move some utility functions from mac80211 to cfg80211 The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi Signed-off-by: Samuel Ortiz Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 05c29c01174c..34de8b21f6d4 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -493,6 +493,7 @@ struct ieee80211s_hdr { /* Mesh flags */ #define MESH_FLAGS_AE_A4 0x1 #define MESH_FLAGS_AE_A5_A6 0x2 +#define MESH_FLAGS_AE 0x3 #define MESH_FLAGS_PS_DEEP 0x4 /** @@ -1085,6 +1086,14 @@ enum ieee80211_spectrum_mgmt_actioncode { WLAN_ACTION_SPCT_CHL_SWITCH = 4, }; +/* Security key length */ +enum ieee80211_key_len { + WLAN_KEY_LEN_WEP40 = 5, + WLAN_KEY_LEN_WEP104 = 13, + WLAN_KEY_LEN_CCMP = 16, + WLAN_KEY_LEN_TKIP = 32, +}; + /* * IEEE 802.11-2007 7.3.2.9 Country information element * -- cgit v1.2.3 From 7df3bb8f59ca8e346bb834006c257cc367c6250a Mon Sep 17 00:00:00 2001 From: Andreas Eversberg Date: Fri, 22 May 2009 11:04:44 +0000 Subject: mISDN: Add watchdog functionality to hfcmulti driver This patch was made by Titus Moldovan and provides IOCTL functions for enabling and disabling the controller's built in watchdog. The use is optional. Signed-off-by: Andreas Eversberg Signed-off-by: Karsten Keil Signed-off-by: David S. Miller --- include/linux/mISDNif.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mISDNif.h b/include/linux/mISDNif.h index 5da3d95b27f1..cf974593a99e 100644 --- a/include/linux/mISDNif.h +++ b/include/linux/mISDNif.h @@ -362,7 +362,8 @@ clear_channelmap(u_int nr, u_char *map) #define MISDN_CTRL_HFC_RECEIVE_ON 0x4006 #define MISDN_CTRL_HFC_ECHOCAN_ON 0x4007 #define MISDN_CTRL_HFC_ECHOCAN_OFF 0x4008 - +#define MISDN_CTRL_HFC_WD_INIT 0x4009 +#define MISDN_CTRL_HFC_WD_RESET 0x400A /* socket options */ #define MISDN_TIME_STAMP 0x0001 -- cgit v1.2.3 From 7cfa153dd709f15188fe84b78ae76387841fe17b Mon Sep 17 00:00:00 2001 From: Andreas Eversberg Date: Fri, 22 May 2009 11:04:46 +0000 Subject: mISDN: Echo canceler now gets delay information from hardware Added tx-fifo information for calculation of current delay to sync tx and rx streams for echo canceler. Signed-off-by: Andreas Eversberg Signed-off-by: Karsten Keil Signed-off-by: David S. Miller --- include/linux/mISDNdsp.h | 3 ++- include/linux/mISDNhw.h | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mISDNdsp.h b/include/linux/mISDNdsp.h index 6b71d2dce508..2c483d45f141 100644 --- a/include/linux/mISDNdsp.h +++ b/include/linux/mISDNdsp.h @@ -12,7 +12,8 @@ struct mISDN_dsp_element { void *(*new)(const char *arg); void (*free)(void *p); void (*process_tx)(void *p, unsigned char *data, int len); - void (*process_rx)(void *p, unsigned char *data, int len); + void (*process_rx)(void *p, unsigned char *data, int len, + unsigned int txlen); int num_args; struct mISDN_dsp_element_arg *args; diff --git a/include/linux/mISDNhw.h b/include/linux/mISDNhw.h index 97ffdc1d3442..ce900f4c2458 100644 --- a/include/linux/mISDNhw.h +++ b/include/linux/mISDNhw.h @@ -185,7 +185,7 @@ extern int dchannel_senddata(struct dchannel *, struct sk_buff *); extern int bchannel_senddata(struct bchannel *, struct sk_buff *); extern void recv_Dchannel(struct dchannel *); extern void recv_Echannel(struct dchannel *, struct dchannel *); -extern void recv_Bchannel(struct bchannel *); +extern void recv_Bchannel(struct bchannel *, unsigned int id); extern void recv_Dchannel_skb(struct dchannel *, struct sk_buff *); extern void recv_Bchannel_skb(struct bchannel *, struct sk_buff *); extern void confirm_Bsend(struct bchannel *bch); -- cgit v1.2.3 From e73f6b2260daf02793071e5ce06ea87df762920a Mon Sep 17 00:00:00 2001 From: Andreas Eversberg Date: Fri, 22 May 2009 11:04:48 +0000 Subject: mISDN: Added layer-1-hold feature Add IMHOLD_L1 ioctl. The feature will be disabled on closing. Signed-off-by: Andreas Eversberg Signed-off-by: Karsten Keil Signed-off-by: David S. Miller --- include/linux/mISDNif.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mISDNif.h b/include/linux/mISDNif.h index cf974593a99e..0b28fd1e3938 100644 --- a/include/linux/mISDNif.h +++ b/include/linux/mISDNif.h @@ -229,6 +229,7 @@ #define OPTION_L2_PTP 2 #define OPTION_L2_FIXEDTEI 3 #define OPTION_L2_CLEANUP 4 +#define OPTION_L1_HOLD 5 /* should be in sync with linux/kobject.h:KOBJ_NAME_LEN */ #define MISDN_MAX_IDLEN 20 @@ -317,6 +318,7 @@ struct ph_info { #define IMCTRLREQ _IOR('I', 69, int) #define IMCLEAR_L2 _IOR('I', 70, int) #define IMSETDEVNAME _IOR('I', 71, struct mISDN_devrename) +#define IMHOLD_L1 _IOR('I', 72, int) static inline int test_channelmap(u_int nr, u_char *map) -- cgit v1.2.3 From db9bb63a1b5b65df41d112a8c21adbbfc6a4ac08 Mon Sep 17 00:00:00 2001 From: Karsten Keil Date: Fri, 22 May 2009 11:04:53 +0000 Subject: mISDN: Add XHFC support for embedded Speech-Design board to hfcmulti New version without emulating arch specific stuff for the other architectures, the special IO and init functions for the 8xx microcontroller are in a separate include file. Signed-off-by: Andreas Eversberg Signed-off-by: Karsten Keil Signed-off-by: David S. Miller --- include/linux/mISDNdsp.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mISDNdsp.h b/include/linux/mISDNdsp.h index 2c483d45f141..41d1eeb9b3bd 100644 --- a/include/linux/mISDNdsp.h +++ b/include/linux/mISDNdsp.h @@ -25,6 +25,7 @@ extern void mISDN_dsp_element_unregister(struct mISDN_dsp_element *elem); struct dsp_features { int hfc_id; /* unique id to identify the chip (or -1) */ int hfc_dtmf; /* set if HFCmulti card supports dtmf */ + int hfc_conf; /* set if HFCmulti card supports conferences */ int hfc_loops; /* set if card supports tone loops */ int hfc_echocanhw; /* set if card supports echocancelation*/ int pcm_id; /* unique id to identify the pcm bus (or -1) */ -- cgit v1.2.3 From 7245a2fe3c10ed7c2e9b1c8a83af5919c0cc0a89 Mon Sep 17 00:00:00 2001 From: Andreas Eversberg Date: Fri, 22 May 2009 11:04:55 +0000 Subject: mISDN: Add PCI ID for Junghanns 8S card new id for HFC-8S Signed-off-by: Andreas Eversberg Signed-off-by: Karsten Keil Signed-off-by: David S. Miller --- include/linux/pci_ids.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 3038ac25491f..4bdff984ac99 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1914,6 +1914,7 @@ #define PCI_SUBDEVICE_ID_CCD_SWYX4S 0xB540 #define PCI_SUBDEVICE_ID_CCD_JH4S20 0xB550 #define PCI_SUBDEVICE_ID_CCD_IOB8ST_1 0xB552 +#define PCI_SUBDEVICE_ID_CCD_JH8S 0xB55B #define PCI_SUBDEVICE_ID_CCD_BN4S 0xB560 #define PCI_SUBDEVICE_ID_CCD_BN8S 0xB562 #define PCI_SUBDEVICE_ID_CCD_BNE1 0xB563 -- cgit v1.2.3 From eac74af9b547e29c9634ed5eff4d514349e73310 Mon Sep 17 00:00:00 2001 From: Karsten Keil Date: Fri, 22 May 2009 11:04:56 +0000 Subject: mISDN: Cleanup debug messages This patch make debug printk's KERN_DEBUG and also fix some codestyle issues. Signed-off-by: Karsten Keil Signed-off-by: David S. Miller --- include/linux/mISDNif.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mISDNif.h b/include/linux/mISDNif.h index 0b28fd1e3938..45100b39a7cf 100644 --- a/include/linux/mISDNif.h +++ b/include/linux/mISDNif.h @@ -292,19 +292,19 @@ struct mISDN_devrename { /* MPH_INFORMATION_REQ payload */ struct ph_info_ch { - __u32 protocol; - __u64 Flags; + __u32 protocol; + __u64 Flags; }; struct ph_info_dch { - struct ph_info_ch ch; - __u16 state; - __u16 num_bch; + struct ph_info_ch ch; + __u16 state; + __u16 num_bch; }; struct ph_info { - struct ph_info_dch dch; - struct ph_info_ch bch[]; + struct ph_info_dch dch; + struct ph_info_ch bch[]; }; /* timer device ioctl */ -- cgit v1.2.3 From daebafed7fef54fcc73d2d01431122cfd578d1e0 Mon Sep 17 00:00:00 2001 From: Andreas Eversberg Date: Mon, 25 May 2009 00:56:56 -0700 Subject: mISDN: Added PCI ID for new Junghanns.net Single E1 cards. The new ID is validated by Cologne Chip. LEDs control is also supported. Signed-off-by: Andreas Eversberg Signed-off-by: Karsten Keil Signed-off-by: David S. Miller --- include/linux/pci_ids.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 4bdff984ac99..12db06cf0e23 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1914,6 +1914,7 @@ #define PCI_SUBDEVICE_ID_CCD_SWYX4S 0xB540 #define PCI_SUBDEVICE_ID_CCD_JH4S20 0xB550 #define PCI_SUBDEVICE_ID_CCD_IOB8ST_1 0xB552 +#define PCI_SUBDEVICE_ID_CCD_JHSE1 0xB553 #define PCI_SUBDEVICE_ID_CCD_JH8S 0xB55B #define PCI_SUBDEVICE_ID_CCD_BN4S 0xB560 #define PCI_SUBDEVICE_ID_CCD_BN8S 0xB562 -- cgit v1.2.3 From e3804cbebb67887879102925961d41b503f7fbe3 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Mon, 25 May 2009 01:53:53 -0700 Subject: net: remove COMPAT_NET_DEV_OPS All drivers are already converted to new net_device_ops API and nobody uses old API anymore. Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller --- include/linux/netdevice.h | 38 -------------------------------------- 1 file changed, 38 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index f8574e76b743..ae3c2099a04b 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -901,44 +901,6 @@ struct net_device /* max exchange id for FCoE LRO by ddp */ unsigned int fcoe_ddp_xid; #endif - -#ifdef CONFIG_COMPAT_NET_DEV_OPS - struct { - int (*init)(struct net_device *dev); - void (*uninit)(struct net_device *dev); - int (*open)(struct net_device *dev); - int (*stop)(struct net_device *dev); - int (*hard_start_xmit) (struct sk_buff *skb, - struct net_device *dev); - u16 (*select_queue)(struct net_device *dev, - struct sk_buff *skb); - void (*change_rx_flags)(struct net_device *dev, - int flags); - void (*set_rx_mode)(struct net_device *dev); - void (*set_multicast_list)(struct net_device *dev); - int (*set_mac_address)(struct net_device *dev, - void *addr); - int (*validate_addr)(struct net_device *dev); - int (*do_ioctl)(struct net_device *dev, - struct ifreq *ifr, int cmd); - int (*set_config)(struct net_device *dev, - struct ifmap *map); - int (*change_mtu)(struct net_device *dev, int new_mtu); - int (*neigh_setup)(struct net_device *dev, - struct neigh_parms *); - void (*tx_timeout) (struct net_device *dev); - struct net_device_stats* (*get_stats)(struct net_device *dev); - void (*vlan_rx_register)(struct net_device *dev, - struct vlan_group *grp); - void (*vlan_rx_add_vid)(struct net_device *dev, - unsigned short vid); - void (*vlan_rx_kill_vid)(struct net_device *dev, - unsigned short vid); -#ifdef CONFIG_NET_POLL_CONTROLLER - void (*poll_controller)(struct net_device *dev); -#endif - }; -#endif }; #define to_net_dev(d) container_of(d, struct net_device, dev) -- cgit v1.2.3 From 08baf561083bc27a953aa087dd8a664bb2b88e8e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 25 May 2009 22:58:01 -0700 Subject: net: txq_trans_update() helper We would like to get rid of netdev->trans_start = jiffies; that about all net drivers have to use in their start_xmit() function, and use txq->trans_start instead. This can be done generically in core network, as suggested by David. Some devices, (particularly loopback) dont need trans_start update, because they dont have transmit watchdog. We could add a new device flag, or rely on fact that txq->tran_start can be updated is txq->xmit_lock_owner is different than -1. Use a helper function to hide our choice. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/netdevice.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index ae3c2099a04b..586b71f0358c 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1674,6 +1674,12 @@ static inline void __netif_tx_unlock_bh(struct netdev_queue *txq) spin_unlock_bh(&txq->_xmit_lock); } +static inline void txq_trans_update(struct netdev_queue *txq) +{ + if (txq->xmit_lock_owner != -1) + txq->trans_start = jiffies; +} + /** * netif_tx_lock - grab network device transmit lock * @dev: network device -- cgit v1.2.3 From 8e401eccd3a62fb57f117bb09b7c1fc70ab19e8c Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 26 May 2009 21:16:25 -0700 Subject: phy: Eliminate references to BUS_ID_SIZE. Just use the constant 20 to keep things working. If someone is so motivated, this can be converted over to dynamic strings. I tried and it's a lot of work. But for now this is good enough. Signed-off-by: David S. Miller --- include/linux/phy.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/phy.h b/include/linux/phy.h index c216e4e503b3..b1368b8f6572 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -79,7 +79,7 @@ typedef enum { * Need to be a little smaller than phydev->dev.bus_id to leave room * for the ":%02x" */ -#define MII_BUS_ID_SIZE (BUS_ID_SIZE - 3) +#define MII_BUS_ID_SIZE (20 - 3) /* * The Bus class for PHYs. Devices which provide access to @@ -407,7 +407,7 @@ struct phy_driver { /* A Structure for boards to register fixups with the PHY Lib */ struct phy_fixup { struct list_head list; - char bus_id[BUS_ID_SIZE]; + char bus_id[20]; u32 phy_uid; u32 phy_uid_mask; int (*run)(struct phy_device *phydev); -- cgit v1.2.3 From 78a478d0efd9e86e5345b436e130497b4e5846e8 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 26 May 2009 18:50:21 +0000 Subject: gro: Inline skb_gro_header and cache frag0 virtual address The function skb_gro_header is called four times per packet which quickly adds up at 10Gb/s. This patch inlines it to allow better optimisations. Some architectures perform multiplication for page_address, which is done by each skb_gro_header invocation. This patch caches that value in skb->cb to avoid the unnecessary multiplications. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- include/linux/netdevice.h | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 586b71f0358c..61890ed0bcf2 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1008,6 +1008,9 @@ void netif_napi_add(struct net_device *dev, struct napi_struct *napi, void netif_napi_del(struct napi_struct *napi); struct napi_gro_cb { + /* Virtual address of skb_shinfo(skb)->frags[0].page + offset. */ + void *frag0; + /* This indicates where we are processing relative to skb->data. */ int data_offset; @@ -1107,9 +1110,9 @@ extern int dev_restart(struct net_device *dev); #ifdef CONFIG_NETPOLL_TRAP extern int netpoll_trap(void); #endif -extern void *skb_gro_header(struct sk_buff *skb, unsigned int hlen); extern int skb_gro_receive(struct sk_buff **head, struct sk_buff *skb); +extern void skb_gro_reset_offset(struct sk_buff *skb); static inline unsigned int skb_gro_offset(const struct sk_buff *skb) { @@ -1126,23 +1129,28 @@ static inline void skb_gro_pull(struct sk_buff *skb, unsigned int len) NAPI_GRO_CB(skb)->data_offset += len; } -static inline void skb_gro_reset_offset(struct sk_buff *skb) +static inline void *skb_gro_header(struct sk_buff *skb, unsigned int hlen) { - NAPI_GRO_CB(skb)->data_offset = 0; + unsigned int offset = skb_gro_offset(skb); + + hlen += offset; + if (!NAPI_GRO_CB(skb)->frag0 || + unlikely(skb_shinfo(skb)->frags[0].size + skb_headlen(skb) < hlen)) + return pskb_may_pull(skb, hlen) ? skb->data + offset : NULL; + + return NAPI_GRO_CB(skb)->frag0 + offset; } static inline void *skb_gro_mac_header(struct sk_buff *skb) { return skb_headlen(skb) ? skb_mac_header(skb) : - page_address(skb_shinfo(skb)->frags[0].page) + - skb_shinfo(skb)->frags[0].page_offset; + NAPI_GRO_CB(skb)->frag0; } static inline void *skb_gro_network_header(struct sk_buff *skb) { return skb_headlen(skb) ? skb_network_header(skb) : - page_address(skb_shinfo(skb)->frags[0].page) + - skb_shinfo(skb)->frags[0].page_offset + skb_network_offset(skb); + NAPI_GRO_CB(skb)->frag0 + skb_network_offset(skb); } static inline int dev_hard_header(struct sk_buff *skb, struct net_device *dev, -- cgit v1.2.3 From 78d3fd0b7de844a6dad56e9620fc9d2271b32ab9 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 26 May 2009 18:50:23 +0000 Subject: gro: Only use skb_gro_header for completely non-linear packets Currently skb_gro_header is used for packets which put the hardware header in skb->data with the rest in frags. Since the drivers that need this optimisation all provide completely non-linear packets, we can gain extra optimisations by only performing the frag0 optimisation for completely non-linear packets. In particular, we can simply test frag0 (instead of skb_headlen) to see whether the optimisation is in force. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- include/linux/netdevice.h | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 61890ed0bcf2..d1afc3b64854 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1135,22 +1135,23 @@ static inline void *skb_gro_header(struct sk_buff *skb, unsigned int hlen) hlen += offset; if (!NAPI_GRO_CB(skb)->frag0 || - unlikely(skb_shinfo(skb)->frags[0].size + skb_headlen(skb) < hlen)) + unlikely(skb_shinfo(skb)->frags[0].size < hlen)) { + NAPI_GRO_CB(skb)->frag0 = NULL; return pskb_may_pull(skb, hlen) ? skb->data + offset : NULL; + } return NAPI_GRO_CB(skb)->frag0 + offset; } static inline void *skb_gro_mac_header(struct sk_buff *skb) { - return skb_headlen(skb) ? skb_mac_header(skb) : - NAPI_GRO_CB(skb)->frag0; + return NAPI_GRO_CB(skb)->frag0 ?: skb_mac_header(skb); } static inline void *skb_gro_network_header(struct sk_buff *skb) { - return skb_headlen(skb) ? skb_network_header(skb) : - NAPI_GRO_CB(skb)->frag0 + skb_network_offset(skb); + return (NAPI_GRO_CB(skb)->frag0 ?: skb->data) + + skb_network_offset(skb); } static inline int dev_hard_header(struct sk_buff *skb, struct net_device *dev, -- cgit v1.2.3 From 7489594cb249aeb178287c9a43a9e4f366044259 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 26 May 2009 18:50:27 +0000 Subject: gro: Optimise length comparison in skb_gro_header By caching frag0_len, we can avoid checking both frag0 and the length separately in skb_gro_header. This helps as skb_gro_header is called four times per packet which amounts to a few million times at 10Gb/s. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- include/linux/netdevice.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index d1afc3b64854..2e44a049be0f 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1011,6 +1011,9 @@ struct napi_gro_cb { /* Virtual address of skb_shinfo(skb)->frags[0].page + offset. */ void *frag0; + /* Length of frag0. */ + unsigned int frag0_len; + /* This indicates where we are processing relative to skb->data. */ int data_offset; @@ -1134,9 +1137,9 @@ static inline void *skb_gro_header(struct sk_buff *skb, unsigned int hlen) unsigned int offset = skb_gro_offset(skb); hlen += offset; - if (!NAPI_GRO_CB(skb)->frag0 || - unlikely(skb_shinfo(skb)->frags[0].size < hlen)) { + if (NAPI_GRO_CB(skb)->frag0_len < hlen) { NAPI_GRO_CB(skb)->frag0 = NULL; + NAPI_GRO_CB(skb)->frag0_len = 0; return pskb_may_pull(skb, hlen) ? skb->data + offset : NULL; } -- cgit v1.2.3 From a5b1cf288d4200506ab62fbb86cc81ace948a306 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 26 May 2009 18:50:28 +0000 Subject: gro: Avoid unnecessary comparison after skb_gro_header For the overwhelming majority of cases, skb_gro_header's return value cannot be NULL. Yet we must check it because of its current form. This patch splits it up into multiple functions in order to avoid this. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- include/linux/netdevice.h | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 2e44a049be0f..371ece521e58 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1132,18 +1132,23 @@ static inline void skb_gro_pull(struct sk_buff *skb, unsigned int len) NAPI_GRO_CB(skb)->data_offset += len; } -static inline void *skb_gro_header(struct sk_buff *skb, unsigned int hlen) +static inline void *skb_gro_header_fast(struct sk_buff *skb, + unsigned int offset) { - unsigned int offset = skb_gro_offset(skb); + return NAPI_GRO_CB(skb)->frag0 + offset; +} - hlen += offset; - if (NAPI_GRO_CB(skb)->frag0_len < hlen) { - NAPI_GRO_CB(skb)->frag0 = NULL; - NAPI_GRO_CB(skb)->frag0_len = 0; - return pskb_may_pull(skb, hlen) ? skb->data + offset : NULL; - } +static inline int skb_gro_header_hard(struct sk_buff *skb, unsigned int hlen) +{ + return NAPI_GRO_CB(skb)->frag0_len < hlen; +} - return NAPI_GRO_CB(skb)->frag0 + offset; +static inline void *skb_gro_header_slow(struct sk_buff *skb, unsigned int hlen, + unsigned int offset) +{ + NAPI_GRO_CB(skb)->frag0 = NULL; + NAPI_GRO_CB(skb)->frag0_len = 0; + return pskb_may_pull(skb, hlen) ? skb->data + offset : NULL; } static inline void *skb_gro_mac_header(struct sk_buff *skb) -- cgit v1.2.3 From a17c859849402315613a0015ac8fbf101acf0cc1 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Wed, 27 May 2009 17:50:35 +0200 Subject: netfilter: conntrack: add support for DCCP handshake sequence to ctnetlink This patch adds CTA_PROTOINFO_DCCP_HANDSHAKE_SEQ that exposes the u64 handshake sequence number to user-space. Signed-off-by: Pablo Neira Ayuso Signed-off-by: Patrick McHardy --- include/linux/netfilter/nfnetlink_conntrack.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/netfilter/nfnetlink_conntrack.h b/include/linux/netfilter/nfnetlink_conntrack.h index 1a865e48b8eb..ed4ef8d0b11b 100644 --- a/include/linux/netfilter/nfnetlink_conntrack.h +++ b/include/linux/netfilter/nfnetlink_conntrack.h @@ -101,6 +101,7 @@ enum ctattr_protoinfo_dccp { CTA_PROTOINFO_DCCP_UNSPEC, CTA_PROTOINFO_DCCP_STATE, CTA_PROTOINFO_DCCP_ROLE, + CTA_PROTOINFO_DCCP_HANDSHAKE_SEQ, __CTA_PROTOINFO_DCCP_MAX, }; #define CTA_PROTOINFO_DCCP_MAX (__CTA_PROTOINFO_DCCP_MAX - 1) -- cgit v1.2.3 From ab6bf42e2339580b5d87746d0ff4da4b1578b03e Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Wed, 27 May 2009 14:38:34 -0700 Subject: mlx4_core: Add module parameter for number of MTTs per segment The current MTT allocator uses kmalloc() to allocate a buffer for its buddy allocator, and thus is limited in the amount of MTT segments that it can control. As a result, the size of memory that can be registered is limited too. This patch uses a module parameter to control the number of MTT entries that each segment represents, allowing more memory to be registered with the same number of segments. Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier --- include/linux/mlx4/device.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index 3aff8a6a389e..ce7cc6c7bcbb 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -210,6 +210,7 @@ struct mlx4_caps { int num_comp_vectors; int num_mpts; int num_mtt_segs; + int mtts_per_seg; int fmr_reserved_mtts; int reserved_mtts; int reserved_mrws; -- cgit v1.2.3 From 1ce8e7b57b3a4527ef83da1c5c7bd8a6b9d87b56 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 27 May 2009 04:42:37 +0000 Subject: net: ALIGN/PTR_ALIGN cleanup in alloc_netdev_mq()/netdev_priv() Use ALIGN() and PTR_ALIGN() macros instead of handcoding them. Get rid of NETDEV_ALIGN_CONST ugly define Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/netdevice.h | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 371ece521e58..14efce33c002 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -905,7 +905,6 @@ struct net_device #define to_net_dev(d) container_of(d, struct net_device, dev) #define NETDEV_ALIGN 32 -#define NETDEV_ALIGN_CONST (NETDEV_ALIGN - 1) static inline struct netdev_queue *netdev_get_tx_queue(const struct net_device *dev, @@ -976,9 +975,7 @@ static inline bool netdev_uses_trailer_tags(struct net_device *dev) */ static inline void *netdev_priv(const struct net_device *dev) { - return (char *)dev + ((sizeof(struct net_device) - + NETDEV_ALIGN_CONST) - & ~NETDEV_ALIGN_CONST); + return (char *)dev + ALIGN(sizeof(struct net_device), NETDEV_ALIGN); } /* Set the sysfs physical device reference for the network logical device -- cgit v1.2.3 From 385a154cac8763284f65cdfa25f6796c9eb1ca21 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Wed, 27 May 2009 15:48:07 -0700 Subject: net: correct a comment for the final #endif Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- include/linux/netdevice.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 14efce33c002..8e03b06e638e 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1975,4 +1975,4 @@ static inline u32 dev_ethtool_get_flags(struct net_device *dev) } #endif /* __KERNEL__ */ -#endif /* _LINUX_DEV_H */ +#endif /* _LINUX_NETDEVICE_H */ -- cgit v1.2.3 From 7f0333eb2f98bbfece4fbfe21076d0a3e49f0bb0 Mon Sep 17 00:00:00 2001 From: Paulius Zaleckas Date: Wed, 13 May 2009 06:20:29 -0700 Subject: wimax: Add netlink interface to get device state wimax connection manager / daemon has to know what is current state of the device. Previously it was only possible to get notification whet state has changed. Note: By mistake, the new generic netlink's number for WIMAX_GNL_OP_STATE_GET was declared inserting into the existing list of API calls, not appending; thus, it'd break existing API. Fixed by Inaky Perez-Gonzalez by moving to the tail, where we add to the interface, not modify the interface. Thanks to Stephen Hemminger for catching this. Signed-off-by: Paulius Zaleckas --- include/linux/wimax.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/wimax.h b/include/linux/wimax.h index c89de7f4e5b9..2f7a6b77d6b3 100644 --- a/include/linux/wimax.h +++ b/include/linux/wimax.h @@ -78,6 +78,7 @@ enum { WIMAX_GNL_OP_RFKILL, /* Run wimax_rfkill() */ WIMAX_GNL_OP_RESET, /* Run wimax_rfkill() */ WIMAX_GNL_RE_STATE_CHANGE, /* Report: status change */ + WIMAX_GNL_OP_STATE_GET, /* Request for current state */ }; @@ -113,6 +114,10 @@ enum { WIMAX_GNL_RESET_IFIDX = 1, }; +/* Atributes for wimax_state_get() */ +enum { + WIMAX_GNL_STGET_IFIDX = 1, +}; /* * Attributes for the Report State Change -- cgit v1.2.3 From 7481806dcfd07e9a636155554f6f4b4fbd976381 Mon Sep 17 00:00:00 2001 From: Inaky Perez-Gonzalez Date: Fri, 22 May 2009 00:41:11 -0700 Subject: wimax: a new API call was added, increment minor protocol version number As the 'state_get' API call was added, we need to increase the minor protocol version number so applications that depend on the can check it's presence. Signed-off-by: Inaky Perez-Gonzalez --- include/linux/wimax.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/wimax.h b/include/linux/wimax.h index 2f7a6b77d6b3..4fdcc5635518 100644 --- a/include/linux/wimax.h +++ b/include/linux/wimax.h @@ -59,7 +59,7 @@ enum { * M - Major: change if removing or modifying an existing call. * m - minor: change when adding a new call */ - WIMAX_GNL_VERSION = 00, + WIMAX_GNL_VERSION = 01, /* Generic NetLink attributes */ WIMAX_GNL_ATTR_INVALID = 0x00, WIMAX_GNL_ATTR_MAX = 10, -- cgit v1.2.3 From 5d4e039b2cb1ca4de9774344ea7b61ad7fa1b0a1 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 28 May 2009 01:05:00 +0000 Subject: bonding: allow bond in mode balance-alb to work properly in bridge -try4.3 [PATCH net-next] bonding: allow bond in mode balance-alb to work properly in bridge -try4.3 (updated) changes v4.2 -> v4.3 - memcpy the address always, not just in case it differs from master->dev_addr - compare_ether_addr_64bits() is not used so there is no direct need to make new header file (I think it would be good to have bond stuff in separate file anyway). changes v4.1 -> v4.2 - use skb->pkt_type == PACKET_HOST compare rather then comparing skb dest addr against skb->dev->dev_addr The problem is described in following bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=487763 Basically here's what's going on. In every mode, bonding interface uses the same mac address for all enslaved devices (except fail_over_mac). Only balance-alb will simultaneously use multiple MAC addresses across different slaves. When you put this kind of bond device into a bridge it will only add one of mac adresses into a hash list of mac addresses, say X. This mac address is marked as local. But this bonding interface also has mac address Y. Now then packet arrives with destination address Y, this address is not marked as local and the packed looks like it needs to be forwarded. This packet is then lost which is wrong. Notice that interfaces can be added and removed from bond while it is in bridge. *** When the multiple addresses for bridge port approach failed to solve this issue due to STP I started to think other way to solve this. I returned to previous solution but tweaked one. This patch solves the situation in the bonding without touching bridge code. For every incoming frame to bonding the destination address is compared to current address of the slave device from which tha packet came. If these two match destination address is replaced by mac address of the master. This address is known by bridge so it is delivered properly. Note that the comparsion is not made directly, it's used skb->pkt_type == PACKET_HOST instead. This is "set" previously in eth_type_trans(). I experimentally tried that this works as good as searching through the slave list (v4 of this patch). Jirka Signed-off-by: Jiri Pirko Signed-off-by: Eric Dumazet Signed-off-by: Andy Gospodarek Signed-off-by: David S. Miller --- include/linux/netdevice.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 8e03b06e638e..1eaf5ae14fea 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1917,6 +1917,16 @@ static inline void netif_set_gso_max_size(struct net_device *dev, dev->gso_max_size = size; } +static inline void skb_bond_set_mac_by_master(struct sk_buff *skb, + struct net_device *master) +{ + if (skb->pkt_type == PACKET_HOST) { + u16 *dest = (u16 *) eth_hdr(skb)->h_dest; + + memcpy(dest, master->dev_addr, ETH_ALEN); + } +} + /* On bonding slaves other than the currently active slave, suppress * duplicates except for 802.3ad ETH_P_SLOW, alb non-mcast/bcast, and * ARP on active-backup slaves with arp_validate enabled. @@ -1930,6 +1940,14 @@ static inline int skb_bond_should_drop(struct sk_buff *skb) if (master->priv_flags & IFF_MASTER_ARPMON) dev->last_rx = jiffies; + if ((master->priv_flags & IFF_MASTER_ALB) && master->br_port) { + /* Do address unmangle. The local destination address + * will be always the one master has. Provides the right + * functionality in a bridge. + */ + skb_bond_set_mac_by_master(skb, master); + } + if (dev->priv_flags & IFF_SLAVE_INACTIVE) { if ((dev->priv_flags & IFF_SLAVE_NEEDARP) && skb->protocol == __cpu_to_be16(ETH_P_ARP)) -- cgit v1.2.3 From ccffad25b5136958d4769ed6de5e87992dd9c65c Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Fri, 22 May 2009 23:22:17 +0000 Subject: net: convert unicast addr list This patch converts unicast address list to standard list_head using previously introduced struct netdev_hw_addr. It also relaxes the locking. Original spinlock (still used for multicast addresses) is not needed and is no longer used for a protection of this list. All reading and writing takes place under rtnl (with no changes). I also removed a possibility to specify the length of the address while adding or deleting unicast address. It's always dev->addr_len. The convertion touched especially e1000 and ixgbe codes when the change is not so trivial. Signed-off-by: Jiri Pirko drivers/net/bnx2.c | 13 +-- drivers/net/e1000/e1000_main.c | 24 +++-- drivers/net/ixgbe/ixgbe_common.c | 14 ++-- drivers/net/ixgbe/ixgbe_common.h | 4 +- drivers/net/ixgbe/ixgbe_main.c | 6 +- drivers/net/ixgbe/ixgbe_type.h | 4 +- drivers/net/macvlan.c | 11 +- drivers/net/mv643xx_eth.c | 11 +- drivers/net/niu.c | 7 +- drivers/net/virtio_net.c | 7 +- drivers/s390/net/qeth_l2_main.c | 6 +- drivers/scsi/fcoe/fcoe.c | 16 ++-- include/linux/netdevice.h | 18 ++-- net/8021q/vlan.c | 4 +- net/8021q/vlan_dev.c | 10 +- net/core/dev.c | 195 +++++++++++++++++++++++++++----------- net/dsa/slave.c | 10 +- net/packet/af_packet.c | 4 +- 18 files changed, 227 insertions(+), 137 deletions(-) Signed-off-by: David S. Miller --- include/linux/netdevice.h | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 1eaf5ae14fea..bbfabf3012b6 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -215,9 +215,12 @@ struct netdev_hw_addr { struct list_head list; unsigned char addr[MAX_ADDR_LEN]; unsigned char type; -#define NETDEV_HW_ADDR_T_LAN 1 -#define NETDEV_HW_ADDR_T_SAN 2 -#define NETDEV_HW_ADDR_T_SLAVE 3 +#define NETDEV_HW_ADDR_T_LAN 1 +#define NETDEV_HW_ADDR_T_SAN 2 +#define NETDEV_HW_ADDR_T_SLAVE 3 +#define NETDEV_HW_ADDR_T_UNICAST 4 + int refcount; + bool synced; struct rcu_head rcu_head; }; @@ -773,10 +776,11 @@ struct net_device unsigned char addr_len; /* hardware address length */ unsigned short dev_id; /* for shared network cards */ - spinlock_t addr_list_lock; - struct dev_addr_list *uc_list; /* Secondary unicast mac addresses */ + struct list_head uc_list; /* Secondary unicast mac + addresses */ int uc_count; /* Number of installed ucasts */ int uc_promisc; + spinlock_t addr_list_lock; struct dev_addr_list *mc_list; /* Multicast mac addresses */ int mc_count; /* Number of installed mcasts */ unsigned int promiscuity; @@ -1836,8 +1840,8 @@ extern int dev_addr_del_multiple(struct net_device *to_dev, /* Functions used for secondary unicast and multicast support */ extern void dev_set_rx_mode(struct net_device *dev); extern void __dev_set_rx_mode(struct net_device *dev); -extern int dev_unicast_delete(struct net_device *dev, void *addr, int alen); -extern int dev_unicast_add(struct net_device *dev, void *addr, int alen); +extern int dev_unicast_delete(struct net_device *dev, void *addr); +extern int dev_unicast_add(struct net_device *dev, void *addr); extern int dev_unicast_sync(struct net_device *to, struct net_device *from); extern void dev_unicast_unsync(struct net_device *to, struct net_device *from); extern int dev_mc_delete(struct net_device *dev, void *addr, int alen, int all); -- cgit v1.2.3 From d1a277c584d0862dbf51991baea947ea5f2ce6bf Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Sat, 30 May 2009 07:55:50 +0000 Subject: can: sja1000: generic OF platform bus driver This patch adds a generic driver for SJA1000 chips on the OpenFirmware platform bus found on embedded PowerPC systems. You need a SJA1000 node definition in your flattened device tree source (DTS) file similar to: can@3,100 { compatible = "nxp,sja1000"; reg = <3 0x100 0x80>; interrupts = <2 0>; interrupt-parent = <&mpic>; nxp,external-clock-frequency = <16000000>; }; See also Documentation/powerpc/dts-bindings/can/sja1000.txt. CC: devicetree-discuss@ozlabs.org Signed-off-by: Wolfgang Grandegger Signed-off-by: David S. Miller --- include/linux/can/platform/sja1000.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/can/platform/sja1000.h b/include/linux/can/platform/sja1000.h index 37966e630ff5..01ee2aeb048d 100644 --- a/include/linux/can/platform/sja1000.h +++ b/include/linux/can/platform/sja1000.h @@ -13,6 +13,7 @@ #define OCR_MODE_TEST 0x01 #define OCR_MODE_NORMAL 0x02 #define OCR_MODE_CLOCK 0x03 +#define OCR_MODE_MASK 0x07 #define OCR_TX0_INVERT 0x04 #define OCR_TX0_PULLDOWN 0x08 #define OCR_TX0_PULLUP 0x10 @@ -21,6 +22,8 @@ #define OCR_TX1_PULLDOWN 0x40 #define OCR_TX1_PULLUP 0x80 #define OCR_TX1_PUSHPULL 0xc0 +#define OCR_TX_MASK 0xfc +#define OCR_TX_SHIFT 2 struct sja1000_platform_data { u32 clock; /* CAN bus oscillator frequency in Hz */ -- cgit v1.2.3 From 56d417b12e57dfe11c9b7ba4bea3882c62a55815 Mon Sep 17 00:00:00 2001 From: Brian Haley Date: Mon, 1 Jun 2009 03:07:33 -0700 Subject: IPv6: Add 'autoconf' and 'disable_ipv6' module parameters Add 'autoconf' and 'disable_ipv6' parameters to the IPv6 module. The first controls if IPv6 addresses are autoconfigured from prefixes received in Router Advertisements. The IPv6 loopback (::1) and link-local addresses are still configured. The second controls if IPv6 addresses are desired at all. No IPv6 addresses will be added to any interfaces. Signed-off-by: Brian Haley Signed-off-by: David S. Miller --- include/linux/ipv6.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index 476d9464ac82..c662efa68289 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -169,6 +169,12 @@ struct ipv6_devconf { __s32 accept_dad; void *sysctl; }; + +struct ipv6_params { + __s32 disable_ipv6; + __s32 autoconf; +}; +extern struct ipv6_params ipv6_defaults; #endif /* index values for the variables in ipv6_devconf */ -- cgit v1.2.3 From f771bef98004d9d141b085d987a77d06669d4f4f Mon Sep 17 00:00:00 2001 From: Nivedita Singhvi Date: Thu, 28 May 2009 07:00:46 +0000 Subject: ipv4: New multicast-all socket option After some discussion offline with Christoph Lameter and David Stevens regarding multicast behaviour in Linux, I'm submitting a slightly modified patch from the one Christoph submitted earlier. This patch provides a new socket option IP_MULTICAST_ALL. In this case, default behaviour is _unchanged_ from the current Linux standard. The socket option is set by default to provide original behaviour. Sockets wishing to receive data only from multicast groups they join explicitly will need to clear this socket option. Signed-off-by: Nivedita Singhvi Signed-off-by: Christoph Lameter Acked-by: David Stevens Signed-off-by: David S. Miller --- include/linux/in.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/in.h b/include/linux/in.h index d60122a3a088..cf196da04ec9 100644 --- a/include/linux/in.h +++ b/include/linux/in.h @@ -107,6 +107,7 @@ struct in_addr { #define MCAST_JOIN_SOURCE_GROUP 46 #define MCAST_LEAVE_SOURCE_GROUP 47 #define MCAST_MSFILTER 48 +#define IP_MULTICAST_ALL 49 #define MCAST_EXCLUDE 0 #define MCAST_INCLUDE 1 -- cgit v1.2.3 From 874ab9233eeddb85fd2dd85131c145bde75da39a Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Tue, 2 Jun 2009 13:58:56 +0200 Subject: netfilter: nf_ct_tcp: TCP simultaneous open support The patch below adds supporting TCP simultaneous open to conntrack. The unused LISTEN state is replaced by a new state (SYN_SENT2) denoting the second SYN sent from the reply direction in the new case. The state table is updated and the function tcp_in_window is modified to handle simultaneous open. The functionality can fairly easily be tested by socat. A sample tcpdump recording 23:21:34.244733 IP (tos 0x0, ttl 64, id 49224, offset 0, flags [DF], proto TCP (6), length 60) 192.168.0.254.2020 > 192.168.0.1.2020: S, cksum 0xe75f (correct), 3383710133:3383710133(0) win 5840 23:21:34.244783 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto TCP (6), length 40) 192.168.0.1.2020 > 192.168.0.254.2020: R, cksum 0x0253 (correct), 0:0(0) ack 3383710134 win 0 23:21:36.038680 IP (tos 0x0, ttl 64, id 28092, offset 0, flags [DF], proto TCP (6), length 60) 192.168.0.1.2020 > 192.168.0.254.2020: S, cksum 0x704b (correct), 2634546729:2634546729(0) win 5840 23:21:36.038777 IP (tos 0x0, ttl 64, id 49225, offset 0, flags [DF], proto TCP (6), length 60) 192.168.0.254.2020 > 192.168.0.1.2020: S, cksum 0xb179 (correct), 3383710133:3383710133(0) ack 2634546730 win 5840 23:21:36.038847 IP (tos 0x0, ttl 64, id 28093, offset 0, flags [DF], proto TCP (6), length 52) 192.168.0.1.2020 > 192.168.0.254.2020: ., cksum 0xebad (correct), ack 3383710134 win 2920 and the corresponding netlink events: [NEW] tcp 6 120 SYN_SENT src=192.168.0.254 dst=192.168.0.1 sport=2020 dport=2020 [UNREPLIED] src=192.168.0.1 dst=192.168.0.254 sport=2020 dport=2020 [UPDATE] tcp 6 120 LISTEN src=192.168.0.254 dst=192.168.0.1 sport=2020 dport=2020 src=192.168.0.1 dst=192.168.0.254 sport=2020 dport=2020 [UPDATE] tcp 6 60 SYN_RECV src=192.168.0.254 dst=192.168.0.1 sport=2020 dport=2020 src=192.168.0.1 dst=192.168.0.254 sport=2020 dport=2020 [UPDATE] tcp 6 432000 ESTABLISHED src=192.168.0.254 dst=192.168.0.1 sport=2020 dport=2020 src=192.168.0.1 dst=192.168.0.254 sport=2020 dport=2020 [ASSURED] The RST packet was dropped in the raw table, thus it did not reach conntrack. nfnetlink_conntrack is unpatched so it shows the new SYN_SENT2 state as the old unused LISTEN. With TCP simultaneous open support we satisfy REQ-2 in RFC 5382 ;-) . Additional minor correction in this patch is that in order to catch uninitialized reply directions, "td_maxwin == 0" is used instead of "td_end == 0" because the former can't be true except in uninitialized state while td_end may accidentally be equal to zero in the mid of a connection. Signed-off-by: Jozsef Kadlecsik Signed-off-by: Patrick McHardy --- include/linux/netfilter/nf_conntrack_tcp.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/netfilter/nf_conntrack_tcp.h b/include/linux/netfilter/nf_conntrack_tcp.h index 3066789b972a..74c27ca770e5 100644 --- a/include/linux/netfilter/nf_conntrack_tcp.h +++ b/include/linux/netfilter/nf_conntrack_tcp.h @@ -15,7 +15,8 @@ enum tcp_conntrack { TCP_CONNTRACK_LAST_ACK, TCP_CONNTRACK_TIME_WAIT, TCP_CONNTRACK_CLOSE, - TCP_CONNTRACK_LISTEN, + TCP_CONNTRACK_LISTEN, /* obsolete */ +#define TCP_CONNTRACK_SYN_SENT2 TCP_CONNTRACK_LISTEN TCP_CONNTRACK_MAX, TCP_CONNTRACK_IGNORE }; -- cgit v1.2.3 From 6bfea1984aea86089907caf8974513c2402a3b3d Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 2 Jun 2009 20:08:44 +0200 Subject: netfilter: conntrack: remove events flags from userspace exposed file This patch moves the event flags from linux/netfilter/nf_conntrack_common.h to net/netfilter/nf_conntrack_ecache.h. This flags are not of any use from userspace. Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter/nf_conntrack_common.h | 69 --------------------------- 1 file changed, 69 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netfilter/nf_conntrack_common.h b/include/linux/netfilter/nf_conntrack_common.h index 885cbe282260..a8248ee422b7 100644 --- a/include/linux/netfilter/nf_conntrack_common.h +++ b/include/linux/netfilter/nf_conntrack_common.h @@ -75,75 +75,6 @@ enum ip_conntrack_status { IPS_FIXED_TIMEOUT = (1 << IPS_FIXED_TIMEOUT_BIT), }; -/* Connection tracking event bits */ -enum ip_conntrack_events -{ - /* New conntrack */ - IPCT_NEW_BIT = 0, - IPCT_NEW = (1 << IPCT_NEW_BIT), - - /* Expected connection */ - IPCT_RELATED_BIT = 1, - IPCT_RELATED = (1 << IPCT_RELATED_BIT), - - /* Destroyed conntrack */ - IPCT_DESTROY_BIT = 2, - IPCT_DESTROY = (1 << IPCT_DESTROY_BIT), - - /* Timer has been refreshed */ - IPCT_REFRESH_BIT = 3, - IPCT_REFRESH = (1 << IPCT_REFRESH_BIT), - - /* Status has changed */ - IPCT_STATUS_BIT = 4, - IPCT_STATUS = (1 << IPCT_STATUS_BIT), - - /* Update of protocol info */ - IPCT_PROTOINFO_BIT = 5, - IPCT_PROTOINFO = (1 << IPCT_PROTOINFO_BIT), - - /* Volatile protocol info */ - IPCT_PROTOINFO_VOLATILE_BIT = 6, - IPCT_PROTOINFO_VOLATILE = (1 << IPCT_PROTOINFO_VOLATILE_BIT), - - /* New helper for conntrack */ - IPCT_HELPER_BIT = 7, - IPCT_HELPER = (1 << IPCT_HELPER_BIT), - - /* Update of helper info */ - IPCT_HELPINFO_BIT = 8, - IPCT_HELPINFO = (1 << IPCT_HELPINFO_BIT), - - /* Volatile helper info */ - IPCT_HELPINFO_VOLATILE_BIT = 9, - IPCT_HELPINFO_VOLATILE = (1 << IPCT_HELPINFO_VOLATILE_BIT), - - /* NAT info */ - IPCT_NATINFO_BIT = 10, - IPCT_NATINFO = (1 << IPCT_NATINFO_BIT), - - /* Counter highest bit has been set, unused */ - IPCT_COUNTER_FILLING_BIT = 11, - IPCT_COUNTER_FILLING = (1 << IPCT_COUNTER_FILLING_BIT), - - /* Mark is set */ - IPCT_MARK_BIT = 12, - IPCT_MARK = (1 << IPCT_MARK_BIT), - - /* NAT sequence adjustment */ - IPCT_NATSEQADJ_BIT = 13, - IPCT_NATSEQADJ = (1 << IPCT_NATSEQADJ_BIT), - - /* Secmark is set */ - IPCT_SECMARK_BIT = 14, - IPCT_SECMARK = (1 << IPCT_SECMARK_BIT), -}; - -enum ip_conntrack_expect_events { - IPEXP_NEW_BIT = 0, - IPEXP_NEW = (1 << IPEXP_NEW_BIT), -}; - #ifdef __KERNEL__ struct ip_conntrack_stat { -- cgit v1.2.3 From e34d5c1a4f9919a81b4ea4591d7383245f35cb8e Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Wed, 3 Jun 2009 10:32:06 +0200 Subject: netfilter: conntrack: replace notify chain by function pointer This patch removes the notify chain infrastructure and replace it by a simple function pointer. This issue has been mentioned in the mailing list several times: the use of the notify chain adds too much overhead for something that is only used by ctnetlink. This patch also changes nfnetlink_send(). It seems that gfp_any() returns GFP_KERNEL for user-context request, like those via ctnetlink, inside the RCU read-side section which is not valid. Using GFP_KERNEL is also evil since netlink may schedule(), this leads to "scheduling while atomic" bug reports. Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter/nfnetlink.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/netfilter/nfnetlink.h b/include/linux/netfilter/nfnetlink.h index c600083cbdf5..2214e5161461 100644 --- a/include/linux/netfilter/nfnetlink.h +++ b/include/linux/netfilter/nfnetlink.h @@ -75,7 +75,7 @@ extern int nfnetlink_subsys_unregister(const struct nfnetlink_subsystem *n); extern int nfnetlink_has_listeners(unsigned int group); extern int nfnetlink_send(struct sk_buff *skb, u32 pid, unsigned group, - int echo); + int echo, gfp_t flags); extern void nfnetlink_set_err(u32 pid, u32 group, int error); extern int nfnetlink_unicast(struct sk_buff *skb, u_int32_t pid, int flags); -- cgit v1.2.3 From dfbf97f3ac980b69dfbc41c83a208211a38443e8 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 2 Jun 2009 05:13:45 +0000 Subject: net: add _skb_dst opaque field struct sk_buff uses one union to define dst and rtable fields. We want to replace direct access to these pointers by accessors. First patch adds a new "unsigned long _skb_dst;" opaque field in this union. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/skbuff.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index aff494ba6a31..d4d7c666ca63 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -325,6 +325,7 @@ struct sk_buff { union { struct dst_entry *dst; struct rtable *rtable; + unsigned long _skb_dst; }; #ifdef CONFIG_XFRM struct sec_path *sp; -- cgit v1.2.3 From 511c3f92ad5b6d9f8f6464be1b4f85f0422be91a Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 2 Jun 2009 05:14:27 +0000 Subject: net: skb->rtable accessor Define skb_rtable(const struct sk_buff *skb) accessor to get rtable from skb Delete skb->rtable field Setting rtable is not allowed, just set dst instead as rtable is an alias. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/skbuff.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index d4d7c666ca63..a3ae3c525833 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -324,7 +324,6 @@ struct sk_buff { union { struct dst_entry *dst; - struct rtable *rtable; unsigned long _skb_dst; }; #ifdef CONFIG_XFRM @@ -427,6 +426,11 @@ extern void skb_dma_unmap(struct device *dev, struct sk_buff *skb, enum dma_data_direction dir); #endif +static inline struct rtable *skb_rtable(const struct sk_buff *skb) +{ + return (struct rtable *)skb->_skb_dst; +} + extern void kfree_skb(struct sk_buff *skb); extern void consume_skb(struct sk_buff *skb); extern void __kfree_skb(struct sk_buff *skb); -- cgit v1.2.3 From adf30907d63893e4208dfe3f5c88ae12bc2f25d5 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 2 Jun 2009 05:19:30 +0000 Subject: net: skb->dst accessors Define three accessors to get/set dst attached to a skb struct dst_entry *skb_dst(const struct sk_buff *skb) void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst) void skb_dst_drop(struct sk_buff *skb) This one should replace occurrences of : dst_release(skb->dst) skb->dst = NULL; Delete skb->dst field Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/skbuff.h | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index a3ae3c525833..9ef6eb20247b 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -323,7 +323,6 @@ struct sk_buff { struct net_device *dev; union { - struct dst_entry *dst; unsigned long _skb_dst; }; #ifdef CONFIG_XFRM @@ -426,9 +425,19 @@ extern void skb_dma_unmap(struct device *dev, struct sk_buff *skb, enum dma_data_direction dir); #endif +static inline struct dst_entry *skb_dst(const struct sk_buff *skb) +{ + return (struct dst_entry *)skb->_skb_dst; +} + +static inline void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst) +{ + skb->_skb_dst = (unsigned long)dst; +} + static inline struct rtable *skb_rtable(const struct sk_buff *skb) { - return (struct rtable *)skb->_skb_dst; + return (struct rtable *)skb_dst(skb); } extern void kfree_skb(struct sk_buff *skb); -- cgit v1.2.3 From e5b9215ef9a274eb9fb65f6aa4602ad82d10a6cb Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 2 Jun 2009 05:20:21 +0000 Subject: net: skb cleanup Can remove anonymous union now it has one field. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/skbuff.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 9ef6eb20247b..7305da92be8f 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -322,9 +322,7 @@ struct sk_buff { ktime_t tstamp; struct net_device *dev; - union { - unsigned long _skb_dst; - }; + unsigned long _skb_dst; #ifdef CONFIG_XFRM struct sec_path *sp; #endif -- cgit v1.2.3 From a84db7949eab7a42e715192f62c55c554e195e54 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 7 Apr 2009 15:41:39 +0800 Subject: sctp: fix error cause codes of ADD-IP extension RFC5061 had changed the error cause codes for Dynamic Address Reconfiguration As the following: Cause Code Value Cause Code --------- ---------------- 0x00A0 Request to Delete Last Remaining IP Address 0x00A1 Operation Refused Due to Resource Shortage 0x00A2 Request to Delete Source IP Address 0x00A3 Association Aborted Due to Illegal ASCONF-ACK 0x00A4 Request Refused - No Authorization This patch fix the error cause codes. Signed-off-by: Wei Yongjun Signed-off-by: Vlad Yasevich --- include/linux/sctp.h | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sctp.h b/include/linux/sctp.h index c2731bfe04d8..b464b9d3d242 100644 --- a/include/linux/sctp.h +++ b/include/linux/sctp.h @@ -487,17 +487,17 @@ typedef enum { * * Value Cause Code * --------- ---------------- - * 0x0100 Request to Delete Last Remaining IP Address. - * 0x0101 Operation Refused Due to Resource Shortage. - * 0x0102 Request to Delete Source IP Address. - * 0x0103 Association Aborted due to illegal ASCONF-ACK - * 0x0104 Request refused - no authorization. + * 0x00A0 Request to Delete Last Remaining IP Address. + * 0x00A1 Operation Refused Due to Resource Shortage. + * 0x00A2 Request to Delete Source IP Address. + * 0x00A3 Association Aborted due to illegal ASCONF-ACK + * 0x00A4 Request refused - no authorization. */ - SCTP_ERROR_DEL_LAST_IP = cpu_to_be16(0x0100), - SCTP_ERROR_RSRC_LOW = cpu_to_be16(0x0101), - SCTP_ERROR_DEL_SRC_IP = cpu_to_be16(0x0102), - SCTP_ERROR_ASCONF_ACK = cpu_to_be16(0x0103), - SCTP_ERROR_REQ_REFUSED = cpu_to_be16(0x0104), + SCTP_ERROR_DEL_LAST_IP = cpu_to_be16(0x00A0), + SCTP_ERROR_RSRC_LOW = cpu_to_be16(0x00A1), + SCTP_ERROR_DEL_SRC_IP = cpu_to_be16(0x00A2), + SCTP_ERROR_ASCONF_ACK = cpu_to_be16(0x00A3), + SCTP_ERROR_REQ_REFUSED = cpu_to_be16(0x00A4), /* AUTH Section 4. New Error Cause * -- cgit v1.2.3 From 8fc0fee09245fe740d81aded36f4af6db1054015 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 24 May 2009 16:57:19 +0200 Subject: cfg80211: use key size constants Instead of hardcoding the key length for validation, use the constants Zhu Yi recently added and add one for AES_CMAC too. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 34de8b21f6d4..a9173d5434d1 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1092,6 +1092,7 @@ enum ieee80211_key_len { WLAN_KEY_LEN_WEP104 = 13, WLAN_KEY_LEN_CCMP = 16, WLAN_KEY_LEN_TKIP = 32, + WLAN_KEY_LEN_AES_CMAC = 16, }; /* -- cgit v1.2.3 From 3b8bcfd5d31ea0fec58681d035544ace707d2536 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 30 May 2009 01:39:53 +0200 Subject: net: introduce pre-up netdev notifier NETDEV_UP is called after the device is set UP, but sometimes it is useful to be able to veto the device UP. Introduce a new NETDEV_PRE_UP notifier that can be used for exactly this. The first use case will be cfg80211 denying interfaces to be set UP if the device is known to be rfkill'ed. Signed-off-by: Johannes Berg Acked-by: David S. Miller Signed-off-by: John W. Linville --- include/linux/notifier.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/notifier.h b/include/linux/notifier.h index b86fa2ffca0c..81bc252dc8ac 100644 --- a/include/linux/notifier.h +++ b/include/linux/notifier.h @@ -198,6 +198,7 @@ static inline int notifier_to_errno(int ret) #define NETDEV_CHANGENAME 0x000A #define NETDEV_FEAT_CHANGE 0x000B #define NETDEV_BONDING_FAILOVER 0x000C +#define NETDEV_PRE_UP 0x000D #define SYS_DOWN 0x0001 /* Notify of system down */ #define SYS_RESTART SYS_DOWN -- cgit v1.2.3 From 19d337dff95cbf76edd3ad95c0cee2732c3e1ec5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 2 Jun 2009 13:01:37 +0200 Subject: rfkill: rewrite This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins Signed-off-by: Henrique de Moraes Holschuh [thinkpad] Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/Kbuild | 1 + include/linux/rfkill.h | 325 ++++++++++++++++++++++++++++++++++++++----------- 2 files changed, 252 insertions(+), 74 deletions(-) (limited to 'include/linux') diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 3f0eaa397ef5..7e09c5c1ed02 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -311,6 +311,7 @@ unifdef-y += ptrace.h unifdef-y += qnx4_fs.h unifdef-y += quota.h unifdef-y += random.h +unifdef-y += rfkill.h unifdef-y += irqnr.h unifdef-y += reboot.h unifdef-y += reiserfs_fs.h diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index de18ef227e00..090852c8de7a 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -4,6 +4,7 @@ /* * Copyright (C) 2006 - 2007 Ivo van Doorn * Copyright (C) 2007 Dmitry Torokhov + * Copyright 2009 Johannes Berg * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -21,6 +22,24 @@ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* define userspace visible states */ +#define RFKILL_STATE_SOFT_BLOCKED 0 +#define RFKILL_STATE_UNBLOCKED 1 +#define RFKILL_STATE_HARD_BLOCKED 2 + +/* and that's all userspace gets */ +#ifdef __KERNEL__ +/* don't allow anyone to use these in the kernel */ +enum rfkill_user_states { + RFKILL_USER_STATE_SOFT_BLOCKED = RFKILL_STATE_SOFT_BLOCKED, + RFKILL_USER_STATE_UNBLOCKED = RFKILL_STATE_UNBLOCKED, + RFKILL_USER_STATE_HARD_BLOCKED = RFKILL_STATE_HARD_BLOCKED, +}; +#undef RFKILL_STATE_SOFT_BLOCKED +#undef RFKILL_STATE_UNBLOCKED +#undef RFKILL_STATE_HARD_BLOCKED + #include #include #include @@ -30,109 +49,267 @@ /** * enum rfkill_type - type of rfkill switch. - * RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device. - * RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device. - * RFKILL_TYPE_UWB: switch is on a ultra wideband device. - * RFKILL_TYPE_WIMAX: switch is on a WiMAX device. - * RFKILL_TYPE_WWAN: switch is on a wireless WAN device. + * + * @RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device. + * @RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device. + * @RFKILL_TYPE_UWB: switch is on a ultra wideband device. + * @RFKILL_TYPE_WIMAX: switch is on a WiMAX device. + * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device. + * @NUM_RFKILL_TYPES: number of defined rfkill types */ enum rfkill_type { - RFKILL_TYPE_WLAN , + RFKILL_TYPE_WLAN, RFKILL_TYPE_BLUETOOTH, RFKILL_TYPE_UWB, RFKILL_TYPE_WIMAX, RFKILL_TYPE_WWAN, - RFKILL_TYPE_MAX, + NUM_RFKILL_TYPES, }; -enum rfkill_state { - RFKILL_STATE_SOFT_BLOCKED = 0, /* Radio output blocked */ - RFKILL_STATE_UNBLOCKED = 1, /* Radio output allowed */ - RFKILL_STATE_HARD_BLOCKED = 2, /* Output blocked, non-overrideable */ - RFKILL_STATE_MAX, /* marker for last valid state */ +/* this is opaque */ +struct rfkill; + +/** + * struct rfkill_ops - rfkill driver methods + * + * @poll: poll the rfkill block state(s) -- only assign this method + * when you need polling. When called, simply call one of the + * rfkill_set{,_hw,_sw}_state family of functions. If the hw + * is getting unblocked you need to take into account the return + * value of those functions to make sure the software block is + * properly used. + * @query: query the rfkill block state(s) and call exactly one of the + * rfkill_set{,_hw,_sw}_state family of functions. Assign this + * method if input events can cause hardware state changes to make + * the rfkill core query your driver before setting a requested + * block. + * @set_block: turn the transmitter on (blocked == false) or off + * (blocked == true) -- this is called only while the transmitter + * is not hard-blocked, but note that the core's view of whether + * the transmitter is hard-blocked might differ from your driver's + * view due to race conditions, so it is possible that it is still + * called at the same time as you are calling rfkill_set_hw_state(). + * This callback must be assigned. + */ +struct rfkill_ops { + void (*poll)(struct rfkill *rfkill, void *data); + void (*query)(struct rfkill *rfkill, void *data); + int (*set_block)(void *data, bool blocked); }; +#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) /** - * struct rfkill - rfkill control structure. - * @name: Name of the switch. - * @type: Radio type which the button controls, the value stored - * here should be a value from enum rfkill_type. - * @state: State of the switch, "UNBLOCKED" means radio can operate. - * @mutex: Guards switch state transitions. It serializes callbacks - * and also protects the state. - * @data: Pointer to the RF button drivers private data which will be - * passed along when toggling radio state. - * @toggle_radio(): Mandatory handler to control state of the radio. - * only RFKILL_STATE_SOFT_BLOCKED and RFKILL_STATE_UNBLOCKED are - * valid parameters. - * @get_state(): handler to read current radio state from hardware, - * may be called from atomic context, should return 0 on success. - * Either this handler OR judicious use of rfkill_force_state() is - * MANDATORY for any driver capable of RFKILL_STATE_HARD_BLOCKED. - * @led_trigger: A LED trigger for this button's LED. - * @dev: Device structure integrating the switch into device tree. - * @node: Used to place switch into list of all switches known to the - * the system. - * - * This structure represents a RF switch located on a network device. + * rfkill_alloc - allocate rfkill structure + * @name: name of the struct -- the string is not copied internally + * @parent: device that has rf switch on it + * @type: type of the switch (RFKILL_TYPE_*) + * @ops: rfkill methods + * @ops_data: data passed to each method + * + * This function should be called by the transmitter driver to allocate an + * rfkill structure. Returns %NULL on failure. */ -struct rfkill { - const char *name; - enum rfkill_type type; - - /* the mutex serializes callbacks and also protects - * the state */ - struct mutex mutex; - enum rfkill_state state; - void *data; - int (*toggle_radio)(void *data, enum rfkill_state state); - int (*get_state)(void *data, enum rfkill_state *state); +struct rfkill * __must_check rfkill_alloc(const char *name, + struct device *parent, + const enum rfkill_type type, + const struct rfkill_ops *ops, + void *ops_data); -#ifdef CONFIG_RFKILL_LEDS - struct led_trigger led_trigger; -#endif +/** + * rfkill_register - Register a rfkill structure. + * @rfkill: rfkill structure to be registered + * + * This function should be called by the transmitter driver to register + * the rfkill structure needs to be registered. Before calling this function + * the driver needs to be ready to service method calls from rfkill. + */ +int __must_check rfkill_register(struct rfkill *rfkill); - struct device dev; - struct list_head node; - enum rfkill_state state_for_resume; -}; -#define to_rfkill(d) container_of(d, struct rfkill, dev) +/** + * rfkill_pause_polling(struct rfkill *rfkill) + * + * Pause polling -- say transmitter is off for other reasons. + * NOTE: not necessary for suspend/resume -- in that case the + * core stops polling anyway + */ +void rfkill_pause_polling(struct rfkill *rfkill); -struct rfkill * __must_check rfkill_allocate(struct device *parent, - enum rfkill_type type); -void rfkill_free(struct rfkill *rfkill); -int __must_check rfkill_register(struct rfkill *rfkill); +/** + * rfkill_resume_polling(struct rfkill *rfkill) + * + * Pause polling -- say transmitter is off for other reasons. + * NOTE: not necessary for suspend/resume -- in that case the + * core stops polling anyway + */ +void rfkill_resume_polling(struct rfkill *rfkill); + + +/** + * rfkill_unregister - Unregister a rfkill structure. + * @rfkill: rfkill structure to be unregistered + * + * This function should be called by the network driver during device + * teardown to destroy rfkill structure. Until it returns, the driver + * needs to be able to service method calls. + */ void rfkill_unregister(struct rfkill *rfkill); -int rfkill_force_state(struct rfkill *rfkill, enum rfkill_state state); -int rfkill_set_default(enum rfkill_type type, enum rfkill_state state); +/** + * rfkill_destroy - free rfkill structure + * @rfkill: rfkill structure to be destroyed + * + * Destroys the rfkill structure. + */ +void rfkill_destroy(struct rfkill *rfkill); + +/** + * rfkill_set_hw_state - Set the internal rfkill hardware block state + * @rfkill: pointer to the rfkill class to modify. + * @state: the current hardware block state to set + * + * rfkill drivers that get events when the hard-blocked state changes + * use this function to notify the rfkill core (and through that also + * userspace) of the current state -- they should also use this after + * resume if the state could have changed. + * + * You need not (but may) call this function if poll_state is assigned. + * + * This function can be called in any context, even from within rfkill + * callbacks. + * + * The function returns the combined block state (true if transmitter + * should be blocked) so that drivers need not keep track of the soft + * block state -- which they might not be able to. + */ +bool __must_check rfkill_set_hw_state(struct rfkill *rfkill, bool blocked); + +/** + * rfkill_set_sw_state - Set the internal rfkill software block state + * @rfkill: pointer to the rfkill class to modify. + * @state: the current software block state to set + * + * rfkill drivers that get events when the soft-blocked state changes + * (yes, some platforms directly act on input but allow changing again) + * use this function to notify the rfkill core (and through that also + * userspace) of the current state -- they should also use this after + * resume if the state could have changed. + * + * This function can be called in any context, even from within rfkill + * callbacks. + * + * The function returns the combined block state (true if transmitter + * should be blocked). + */ +bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked); + +/** + * rfkill_set_states - Set the internal rfkill block states + * @rfkill: pointer to the rfkill class to modify. + * @sw: the current software block state to set + * @hw: the current hardware block state to set + * + * This function can be called in any context, even from within rfkill + * callbacks. + */ +void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw); /** - * rfkill_state_complement - return complementar state - * @state: state to return the complement of + * rfkill_set_global_sw_state - set global sw block default + * @type: rfkill type to set default for + * @blocked: default to set * - * Returns RFKILL_STATE_SOFT_BLOCKED if @state is RFKILL_STATE_UNBLOCKED, - * returns RFKILL_STATE_UNBLOCKED otherwise. + * This function sets the global default -- use at boot if your platform has + * an rfkill switch. If not early enough this call may be ignored. + * + * XXX: instead of ignoring -- how about just updating all currently + * registered drivers? */ -static inline enum rfkill_state rfkill_state_complement(enum rfkill_state state) +void rfkill_set_global_sw_state(const enum rfkill_type type, bool blocked); +#else /* !RFKILL */ +static inline struct rfkill * __must_check +rfkill_alloc(const char *name, + struct device *parent, + const enum rfkill_type type, + const struct rfkill_ops *ops, + void *ops_data) +{ + return ERR_PTR(-ENODEV); +} + +static inline int __must_check rfkill_register(struct rfkill *rfkill) +{ + if (rfkill == ERR_PTR(-ENODEV)) + return 0; + return -EINVAL; +} + +static inline void rfkill_pause_polling(struct rfkill *rfkill) +{ +} + +static inline void rfkill_resume_polling(struct rfkill *rfkill) +{ +} + +static inline void rfkill_unregister(struct rfkill *rfkill) +{ +} + +static inline void rfkill_destroy(struct rfkill *rfkill) +{ +} + +static inline bool rfkill_set_hw_state(struct rfkill *rfkill, bool blocked) +{ + return blocked; +} + +static inline bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked) +{ + return blocked; +} + +static inline void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw) +{ +} + +static inline void rfkill_set_global_sw_state(const enum rfkill_type type, + bool blocked) { - return (state == RFKILL_STATE_UNBLOCKED) ? - RFKILL_STATE_SOFT_BLOCKED : RFKILL_STATE_UNBLOCKED; } +#endif /* RFKILL || RFKILL_MODULE */ + +#ifdef CONFIG_RFKILL_LEDS /** - * rfkill_get_led_name - Get the LED trigger name for the button's LED. + * rfkill_get_led_trigger_name - Get the LED trigger name for the button's LED. * This function might return a NULL pointer if registering of the - * LED trigger failed. - * Use this as "default_trigger" for the LED. + * LED trigger failed. Use this as "default_trigger" for the LED. */ -static inline char *rfkill_get_led_name(struct rfkill *rfkill) -{ -#ifdef CONFIG_RFKILL_LEDS - return (char *)(rfkill->led_trigger.name); +const char *rfkill_get_led_trigger_name(struct rfkill *rfkill); + +/** + * rfkill_set_led_trigger_name -- set the LED trigger name + * @rfkill: rfkill struct + * @name: LED trigger name + * + * This function sets the LED trigger name of the radio LED + * trigger that rfkill creates. It is optional, but if called + * must be called before rfkill_register() to be effective. + */ +void rfkill_set_led_trigger_name(struct rfkill *rfkill, const char *name); #else +static inline const char *rfkill_get_led_trigger_name(struct rfkill *rfkill) +{ return NULL; -#endif } +static inline void +rfkill_set_led_trigger_name(struct rfkill *rfkill, const char *name) +{ +} +#endif + +#endif /* __KERNEL__ */ + #endif /* RFKILL_H */ -- cgit v1.2.3 From c64fb01627e24725d1f9d535e4426475a4415753 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 2 Jun 2009 13:01:38 +0200 Subject: rfkill: create useful userspace interface The new code added by this patch will make rfkill create a misc character device /dev/rfkill that userspace can use to control rfkill soft blocks and get status of devices as well as events when the status changes. Using it is very simple -- when you open it you can read a number of times to get the initial state, and every further read blocks (you can poll) on getting the next event from the kernel. The same structure you read is also used when writing to it to change the soft block of a given device, all devices of a given type, or all devices. This also makes CONFIG_RFKILL_INPUT selectable again in order to be able to test without it present since its functionality can now be replaced by userspace entirely and distros and users may not want the input part of rfkill interfering with their userspace code. We will also write a userspace daemon to handle all that and consequently add the input code to the feature removal schedule. In order to have rfkilld support both kernels with and without CONFIG_RFKILL_INPUT (or new kernels after its eventual removal) we also add an ioctl (that only exists if rfkill-input is present) to disable rfkill-input. It is not very efficient, but at least gives the correct behaviour in all cases. Signed-off-by: Johannes Berg Acked-by: Marcel Holtmann Signed-off-by: John W. Linville --- include/linux/rfkill.h | 84 +++++++++++++++++++++++++++++++++++--------------- 1 file changed, 60 insertions(+), 24 deletions(-) (limited to 'include/linux') diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index 090852c8de7a..7c116f6631b8 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -22,34 +22,17 @@ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ +#include /* define userspace visible states */ #define RFKILL_STATE_SOFT_BLOCKED 0 #define RFKILL_STATE_UNBLOCKED 1 #define RFKILL_STATE_HARD_BLOCKED 2 -/* and that's all userspace gets */ -#ifdef __KERNEL__ -/* don't allow anyone to use these in the kernel */ -enum rfkill_user_states { - RFKILL_USER_STATE_SOFT_BLOCKED = RFKILL_STATE_SOFT_BLOCKED, - RFKILL_USER_STATE_UNBLOCKED = RFKILL_STATE_UNBLOCKED, - RFKILL_USER_STATE_HARD_BLOCKED = RFKILL_STATE_HARD_BLOCKED, -}; -#undef RFKILL_STATE_SOFT_BLOCKED -#undef RFKILL_STATE_UNBLOCKED -#undef RFKILL_STATE_HARD_BLOCKED - -#include -#include -#include -#include -#include -#include - /** * enum rfkill_type - type of rfkill switch. * + * @RFKILL_TYPE_ALL: toggles all switches (userspace only) * @RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device. * @RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device. * @RFKILL_TYPE_UWB: switch is on a ultra wideband device. @@ -58,6 +41,7 @@ enum rfkill_user_states { * @NUM_RFKILL_TYPES: number of defined rfkill types */ enum rfkill_type { + RFKILL_TYPE_ALL = 0, RFKILL_TYPE_WLAN, RFKILL_TYPE_BLUETOOTH, RFKILL_TYPE_UWB, @@ -66,6 +50,62 @@ enum rfkill_type { NUM_RFKILL_TYPES, }; +/** + * enum rfkill_operation - operation types + * @RFKILL_OP_ADD: a device was added + * @RFKILL_OP_DEL: a device was removed + * @RFKILL_OP_CHANGE: a device's state changed -- userspace changes one device + * @RFKILL_OP_CHANGE_ALL: userspace changes all devices (of a type, or all) + */ +enum rfkill_operation { + RFKILL_OP_ADD = 0, + RFKILL_OP_DEL, + RFKILL_OP_CHANGE, + RFKILL_OP_CHANGE_ALL, +}; + +/** + * struct rfkill_event - events for userspace on /dev/rfkill + * @idx: index of dev rfkill + * @type: type of the rfkill struct + * @op: operation code + * @hard: hard state (0/1) + * @soft: soft state (0/1) + * + * Structure used for userspace communication on /dev/rfkill, + * used for events from the kernel and control to the kernel. + */ +struct rfkill_event { + __u32 idx; + __u8 type; + __u8 op; + __u8 soft, hard; +} __packed; + +/* ioctl for turning off rfkill-input (if present) */ +#define RFKILL_IOC_MAGIC 'R' +#define RFKILL_IOC_NOINPUT 1 +#define RFKILL_IOCTL_NOINPUT _IO(RFKILL_IOC_MAGIC, RFKILL_IOC_NOINPUT) + +/* and that's all userspace gets */ +#ifdef __KERNEL__ +/* don't allow anyone to use these in the kernel */ +enum rfkill_user_states { + RFKILL_USER_STATE_SOFT_BLOCKED = RFKILL_STATE_SOFT_BLOCKED, + RFKILL_USER_STATE_UNBLOCKED = RFKILL_STATE_UNBLOCKED, + RFKILL_USER_STATE_HARD_BLOCKED = RFKILL_STATE_HARD_BLOCKED, +}; +#undef RFKILL_STATE_SOFT_BLOCKED +#undef RFKILL_STATE_UNBLOCKED +#undef RFKILL_STATE_HARD_BLOCKED + +#include +#include +#include +#include +#include +#include + /* this is opaque */ struct rfkill; @@ -84,11 +124,7 @@ struct rfkill; * the rfkill core query your driver before setting a requested * block. * @set_block: turn the transmitter on (blocked == false) or off - * (blocked == true) -- this is called only while the transmitter - * is not hard-blocked, but note that the core's view of whether - * the transmitter is hard-blocked might differ from your driver's - * view due to race conditions, so it is possible that it is still - * called at the same time as you are calling rfkill_set_hw_state(). + * (blocked == true) -- ignore and return 0 when hard blocked. * This callback must be assigned. */ struct rfkill_ops { -- cgit v1.2.3 From 6081162e2ed78dfcf149b076b047078ab1445cc2 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 2 Jun 2009 13:01:40 +0200 Subject: rfkill: add function to query state Sometimes it is necessary to know how the state is, and it is easier to query rfkill than keep track of it somewhere else, so add a function for that. This could later be expanded to return hard/soft block, but so far that isn't necessary. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/rfkill.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/linux') diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index 7c116f6631b8..ee3eddea8568 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -261,6 +261,13 @@ void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw); * registered drivers? */ void rfkill_set_global_sw_state(const enum rfkill_type type, bool blocked); + +/** + * rfkill_blocked - query rfkill block + * + * @rfkill: rfkill struct to query + */ +bool rfkill_blocked(struct rfkill *rfkill); #else /* !RFKILL */ static inline struct rfkill * __must_check rfkill_alloc(const char *name, @@ -313,6 +320,11 @@ static inline void rfkill_set_global_sw_state(const enum rfkill_type type, bool blocked) { } + +static inline bool rfkill_blocked(struct rfkill *rfkill) +{ + return false; +} #endif /* RFKILL || RFKILL_MODULE */ -- cgit v1.2.3 From 278b2513f76161a9cf1ebddd620dc9d1714fe573 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Wed, 3 Jun 2009 21:20:51 -0700 Subject: gso: Stop fraglists from escaping As it stands skb fraglists can get past the check in dev_queue_xmit if the skb is marked as GSO. In particular, if the packet doesn't have the proper checksums for GSO, but can otherwise be handled by the underlying device, we will not perform the fraglist check on it at all. If the underlying device cannot handle fraglists, then this will break. The fix is as simple as moving the fraglist check from the device check into skb_gso_ok. This has caused crashes with Xen when used together with GRO which can generate GSO packets with fraglists. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- include/linux/netdevice.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index bbfabf3012b6..2a801380b502 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1903,15 +1903,14 @@ static inline int net_gso_ok(int features, int gso_type) static inline int skb_gso_ok(struct sk_buff *skb, int features) { - return net_gso_ok(features, skb_shinfo(skb)->gso_type); + return net_gso_ok(features, skb_shinfo(skb)->gso_type) && + (!skb_shinfo(skb)->frag_list || (features & NETIF_F_FRAGLIST)); } static inline int netif_needs_gso(struct net_device *dev, struct sk_buff *skb) { return skb_is_gso(skb) && (!skb_gso_ok(skb, dev->features) || - (skb_shinfo(skb)->frag_list && - !(dev->features & NETIF_F_FRAGLIST)) || unlikely(skb->ip_summed != CHECKSUM_PARTIAL)); } -- cgit v1.2.3 From a5e78820966e17c2316866e00047e4e7e5480f04 Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Thu, 4 Jun 2009 16:54:42 +0200 Subject: netfilter: x_tables: added hook number into match extension parameter structure. Signed-off-by: Evgeniy Polyakov Signed-off-by: Patrick McHardy --- include/linux/netfilter/x_tables.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h index c9efe039dc57..1030b7593898 100644 --- a/include/linux/netfilter/x_tables.h +++ b/include/linux/netfilter/x_tables.h @@ -184,9 +184,10 @@ struct xt_counters_info * @matchinfo: per-match data * @fragoff: packet is a fragment, this is the data offset * @thoff: position of transport header relative to skb->data - * @hotdrop: drop packet if we had inspection problems + * @hook: hook number given packet came from * @family: Actual NFPROTO_* through which the function is invoked * (helpful when match->family == NFPROTO_UNSPEC) + * @hotdrop: drop packet if we had inspection problems */ struct xt_match_param { const struct net_device *in, *out; @@ -194,8 +195,9 @@ struct xt_match_param { const void *matchinfo; int fragoff; unsigned int thoff; - bool *hotdrop; + unsigned int hooknum; u_int8_t family; + bool *hotdrop; }; /** -- cgit v1.2.3 From 5926a295bb78272b3f648f62febecd19a1b6a6ca Mon Sep 17 00:00:00 2001 From: Alessandro Rubini Date: Thu, 4 Jun 2009 17:43:04 +0100 Subject: [ARM] 5541/1: serial/amba-pl011.c: add support for the modified port found in Nomadik The Nomadik 8815 SoC has a slightly modified version of the PL011 block. The patch uses the different ID value as a key to select a vendor structure that is used to keep track of the differences, as suggested by Russell King. Signed-off-by: Alessandro Rubini Acked-by: Andrea Gallo Acked-by: Linus Walleij Signed-off-by: Russell King --- include/linux/amba/serial.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h index 48ee32a18ac5..42949e210cb8 100644 --- a/include/linux/amba/serial.h +++ b/include/linux/amba/serial.h @@ -114,6 +114,9 @@ #define UART011_IFLS_TX4_8 (2 << 0) #define UART011_IFLS_TX6_8 (3 << 0) #define UART011_IFLS_TX7_8 (4 << 0) +/* special values for ST vendor with deeper fifo */ +#define UART011_IFLS_RX_HALF (5 << 3) +#define UART011_IFLS_TX_HALF (5 << 0) #define UART011_OEIM (1 << 10) /* overrun error interrupt mask */ #define UART011_BEIM (1 << 9) /* break error interrupt mask */ -- cgit v1.2.3 From c0683039207226afcffbe0fbf6a1caaee77a37b0 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 3 Jun 2009 17:43:14 +0100 Subject: [ARM] 5536/1: Move clk_add_alias() to arch/arm/common/clkdev.c This can be used for other arm platforms too as discussed on the linux-arm-kernel list. Also check the return value with IS_ERR and return PTR_ERR as suggested by Russell King. Signed-off-by: Tony Lindgren Signed-off-by: Russell King --- include/linux/clk.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'include/linux') diff --git a/include/linux/clk.h b/include/linux/clk.h index 1db9bbf444a3..1d37f42ac294 100644 --- a/include/linux/clk.h +++ b/include/linux/clk.h @@ -142,4 +142,17 @@ struct clk *clk_get_parent(struct clk *clk); */ struct clk *clk_get_sys(const char *dev_id, const char *con_id); +/** + * clk_add_alias - add a new clock alias + * @alias: name for clock alias + * @alias_dev_name: device name + * @id: platform specific clock name + * @dev: device + * + * Allows using generic clock names for drivers by adding a new alias. + * Assumes clkdev, see clkdev.h for more info. + */ +int clk_add_alias(const char *alias, const char *alias_dev_name, char *id, + struct device *dev); + #endif -- cgit v1.2.3 From 10662aa3083f869c645cc2abf5d66849001e2f5d Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 5 Jun 2009 13:24:24 +0200 Subject: netfilter: xt_NFQUEUE: queue balancing support Adds support for specifying a range of queues instead of a single queue id. Flows will be distributed across the given range. This is useful for multicore systems: Instead of having a single application read packets from a queue, start multiple instances on queues x, x+1, .. x+n. Each instance can process flows independently. Packets for the same connection are put into the same queue. Signed-off-by: Holger Eitzenberger Signed-off-by: Florian Westphal Signed-off-by: Patrick McHardy --- include/linux/netfilter/xt_NFQUEUE.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netfilter/xt_NFQUEUE.h b/include/linux/netfilter/xt_NFQUEUE.h index 982a89f78272..2584f4a777de 100644 --- a/include/linux/netfilter/xt_NFQUEUE.h +++ b/include/linux/netfilter/xt_NFQUEUE.h @@ -15,4 +15,9 @@ struct xt_NFQ_info { __u16 queuenum; }; +struct xt_NFQ_info_v1 { + __u16 queuenum; + __u16 queues_total; +}; + #endif /* _XT_NFQ_TARGET_H */ -- cgit v1.2.3 From 1b8e69662e1a086878bf930a6042daf7f8a076cc Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 5 Jun 2009 14:37:23 +0000 Subject: pnp: add PNP resource range checking function Add a PNP resource range check function, indicating whether a resource has been assigned to any device. Signed-off-by: Bjorn Helgaas [apw@canonical.com: fixed up exports et al] Signed-off-by: Andy Whitcroft Signed-off-by: Eric Anholt --- include/linux/pnp.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pnp.h b/include/linux/pnp.h index ca3c88773028..b063c7328ba5 100644 --- a/include/linux/pnp.h +++ b/include/linux/pnp.h @@ -446,6 +446,7 @@ int pnp_start_dev(struct pnp_dev *dev); int pnp_stop_dev(struct pnp_dev *dev); int pnp_activate_dev(struct pnp_dev *dev); int pnp_disable_dev(struct pnp_dev *dev); +int pnp_range_reserved(resource_size_t start, resource_size_t end); /* protocol helpers */ int pnp_is_active(struct pnp_dev *dev); @@ -476,6 +477,7 @@ static inline int pnp_start_dev(struct pnp_dev *dev) { return -ENODEV; } static inline int pnp_stop_dev(struct pnp_dev *dev) { return -ENODEV; } static inline int pnp_activate_dev(struct pnp_dev *dev) { return -ENODEV; } static inline int pnp_disable_dev(struct pnp_dev *dev) { return -ENODEV; } +static inline int pnp_range_reserved(resource_size_t start, resource_size_t end) { return 0;} /* protocol helpers */ static inline int pnp_is_active(struct pnp_dev *dev) { return 0; } -- cgit v1.2.3 From 2ac6bf4ddc87c3b6b609f8fa82f6ebbffeac12f4 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Fri, 5 Jun 2009 10:36:24 -0700 Subject: IB/mlx4: Add strong ordering to local inval and fast reg work requests The ConnectX Programmer's Reference Manual states that the "SO" bit must be set when posting Fast Register and Local Invalidate send work requests. When this bit is set, the work request will be executed only after all previous work requests on the send queue have been executed. (If the bit is not set, Fast Register and Local Invalidate WQEs may begin execution too early, which violates the defined semantics for these operations) This fixes the issue with NFS/RDMA reported in Signed-off-by: Jack Morgenstein Cc: Signed-off-by: Roland Dreier --- include/linux/mlx4/qp.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mlx4/qp.h b/include/linux/mlx4/qp.h index bf8f11982dae..9f29d86e5dc9 100644 --- a/include/linux/mlx4/qp.h +++ b/include/linux/mlx4/qp.h @@ -165,6 +165,7 @@ enum { MLX4_WQE_CTRL_IP_CSUM = 1 << 4, MLX4_WQE_CTRL_TCP_UDP_CSUM = 1 << 5, MLX4_WQE_CTRL_INS_VLAN = 1 << 6, + MLX4_WQE_CTRL_STRONG_ORDER = 1 << 7, }; struct mlx4_wqe_ctrl_seg { -- cgit v1.2.3 From a93958ac980f0ce594ad90657ecbc595ff157a40 Mon Sep 17 00:00:00 2001 From: Ayaz Abdulla Date: Sun, 7 Jun 2009 03:54:37 -0700 Subject: removal of forcedeth device ids This patch removes the forcedeth device ids from pci_ids.h The forcedeth driver uses the device id constants directly in its source file. [ Need to keep PCI_DEVICE_ID_NVIDIA_NVENET_15 in order to keep drivers/pci/quirks.c building -DaveM ] Signed-off-by: Ayaz Abdulla Signed-off-by: David S. Miller --- include/linux/pci_ids.h | 38 -------------------------------------- 1 file changed, 38 deletions(-) (limited to 'include/linux') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 12db06cf0e23..b87c51aea14c 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1066,8 +1066,6 @@ #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SMBUS 0x0034 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE 0x0035 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA 0x0036 -#define PCI_DEVICE_ID_NVIDIA_NVENET_10 0x0037 -#define PCI_DEVICE_ID_NVIDIA_NVENET_11 0x0038 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2 0x003e #define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_ULTRA 0x0040 #define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800 0x0041 @@ -1078,21 +1076,16 @@ #define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE 0x0053 #define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA 0x0054 #define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2 0x0055 -#define PCI_DEVICE_ID_NVIDIA_NVENET_8 0x0056 -#define PCI_DEVICE_ID_NVIDIA_NVENET_9 0x0057 #define PCI_DEVICE_ID_NVIDIA_CK804_AUDIO 0x0059 #define PCI_DEVICE_ID_NVIDIA_CK804_PCIE 0x005d #define PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS 0x0064 #define PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE 0x0065 -#define PCI_DEVICE_ID_NVIDIA_NVENET_2 0x0066 #define PCI_DEVICE_ID_NVIDIA_MCP2_MODEM 0x0069 #define PCI_DEVICE_ID_NVIDIA_MCP2_AUDIO 0x006a #define PCI_DEVICE_ID_NVIDIA_NFORCE2S_SMBUS 0x0084 #define PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE 0x0085 -#define PCI_DEVICE_ID_NVIDIA_NVENET_4 0x0086 #define PCI_DEVICE_ID_NVIDIA_MCP2S_MODEM 0x0089 #define PCI_DEVICE_ID_NVIDIA_CK8_AUDIO 0x008a -#define PCI_DEVICE_ID_NVIDIA_NVENET_5 0x008c #define PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA 0x008e #define PCI_DEVICE_ID_NVIDIA_GEFORCE_7800_GT 0x0090 #define PCI_DEVICE_ID_NVIDIA_GEFORCE_7800_GTX 0x0091 @@ -1108,15 +1101,12 @@ #define PCI_DEVICE_ID_NVIDIA_NFORCE3 0x00d1 #define PCI_DEVICE_ID_NVIDIA_NFORCE3_SMBUS 0x00d4 #define PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE 0x00d5 -#define PCI_DEVICE_ID_NVIDIA_NVENET_3 0x00d6 #define PCI_DEVICE_ID_NVIDIA_MCP3_MODEM 0x00d9 #define PCI_DEVICE_ID_NVIDIA_MCP3_AUDIO 0x00da -#define PCI_DEVICE_ID_NVIDIA_NVENET_7 0x00df #define PCI_DEVICE_ID_NVIDIA_NFORCE3S 0x00e1 #define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA 0x00e3 #define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SMBUS 0x00e4 #define PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE 0x00e5 -#define PCI_DEVICE_ID_NVIDIA_NVENET_6 0x00e6 #define PCI_DEVICE_ID_NVIDIA_CK8S_AUDIO 0x00ea #define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2 0x00ee #define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6800_ALT1 0x00f0 @@ -1176,7 +1166,6 @@ #define PCI_DEVICE_ID_NVIDIA_NFORCE_SMBUS 0x01b4 #define PCI_DEVICE_ID_NVIDIA_NFORCE_IDE 0x01bc #define PCI_DEVICE_ID_NVIDIA_MCP1_MODEM 0x01c1 -#define PCI_DEVICE_ID_NVIDIA_NVENET_1 0x01c3 #define PCI_DEVICE_ID_NVIDIA_NFORCE2 0x01e0 #define PCI_DEVICE_ID_NVIDIA_GEFORCE3 0x0200 #define PCI_DEVICE_ID_NVIDIA_GEFORCE3_1 0x0201 @@ -1199,8 +1188,6 @@ #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE 0x036E #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA 0x037E #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2 0x037F -#define PCI_DEVICE_ID_NVIDIA_NVENET_12 0x0268 -#define PCI_DEVICE_ID_NVIDIA_NVENET_13 0x0269 #define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800 0x0280 #define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800_8X 0x0281 #define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800SE 0x0282 @@ -1247,46 +1234,21 @@ #define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5700_2 0x0348 #define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_GO1000 0x034C #define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_1100 0x034E -#define PCI_DEVICE_ID_NVIDIA_NVENET_14 0x0372 #define PCI_DEVICE_ID_NVIDIA_NVENET_15 0x0373 -#define PCI_DEVICE_ID_NVIDIA_NVENET_16 0x03E5 -#define PCI_DEVICE_ID_NVIDIA_NVENET_17 0x03E6 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA 0x03E7 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SMBUS 0x03EB #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE 0x03EC -#define PCI_DEVICE_ID_NVIDIA_NVENET_18 0x03EE -#define PCI_DEVICE_ID_NVIDIA_NVENET_19 0x03EF #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2 0x03F6 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3 0x03F7 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_SMBUS 0x0446 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE 0x0448 -#define PCI_DEVICE_ID_NVIDIA_NVENET_20 0x0450 -#define PCI_DEVICE_ID_NVIDIA_NVENET_21 0x0451 -#define PCI_DEVICE_ID_NVIDIA_NVENET_22 0x0452 -#define PCI_DEVICE_ID_NVIDIA_NVENET_23 0x0453 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_SMBUS 0x0542 -#define PCI_DEVICE_ID_NVIDIA_NVENET_24 0x054C -#define PCI_DEVICE_ID_NVIDIA_NVENET_25 0x054D -#define PCI_DEVICE_ID_NVIDIA_NVENET_26 0x054E -#define PCI_DEVICE_ID_NVIDIA_NVENET_27 0x054F -#define PCI_DEVICE_ID_NVIDIA_NVENET_28 0x07DC -#define PCI_DEVICE_ID_NVIDIA_NVENET_29 0x07DD -#define PCI_DEVICE_ID_NVIDIA_NVENET_30 0x07DE -#define PCI_DEVICE_ID_NVIDIA_NVENET_31 0x07DF #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE 0x0560 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE 0x056C #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP78S_SMBUS 0x0752 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE 0x0759 -#define PCI_DEVICE_ID_NVIDIA_NVENET_32 0x0760 -#define PCI_DEVICE_ID_NVIDIA_NVENET_33 0x0761 -#define PCI_DEVICE_ID_NVIDIA_NVENET_34 0x0762 -#define PCI_DEVICE_ID_NVIDIA_NVENET_35 0x0763 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_SMBUS 0x07D8 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP79_SMBUS 0x0AA2 -#define PCI_DEVICE_ID_NVIDIA_NVENET_36 0x0AB0 -#define PCI_DEVICE_ID_NVIDIA_NVENET_37 0x0AB1 -#define PCI_DEVICE_ID_NVIDIA_NVENET_38 0x0AB2 -#define PCI_DEVICE_ID_NVIDIA_NVENET_39 0x0AB3 #define PCI_VENDOR_ID_IMS 0x10e0 #define PCI_DEVICE_ID_IMS_TT128 0x9128 -- cgit v1.2.3 From db429e9ec0f9dee2d8e50c154f04f29f880fc9d6 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 7 Jun 2009 13:52:52 +0200 Subject: partitions: add ->set_capacity block device method * Add ->set_capacity block device method and use it in rescan_partitions() to attempt enabling native capacity of the device upon detecting the partition which exceeds device capacity. * Add GENHD_FL_NATIVE_CAPACITY flag to try limit attempts of enabling native capacity during partition scan. Together with the consecutive patch implementing ->set_capacity method in ide-gd device driver this allows automatic disabling of Host Protected Area (HPA) if any partitions overlapping HPA are detected. Cc: Robert Hancock Cc: Frans Pop Cc: "Andries E. Brouwer" Acked-by: Al Viro Emphatically-Acked-by: Alan Cox Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/blkdev.h | 2 ++ include/linux/genhd.h | 1 + 2 files changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 6f841fb1be30..a2d7298be351 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -1106,6 +1106,8 @@ struct block_device_operations { int (*direct_access) (struct block_device *, sector_t, void **, unsigned long *); int (*media_changed) (struct gendisk *); + unsigned long long (*set_capacity) (struct gendisk *, + unsigned long long); int (*revalidate_disk) (struct gendisk *); int (*getgeo)(struct block_device *, struct hd_geometry *); struct module *owner; diff --git a/include/linux/genhd.h b/include/linux/genhd.h index 634c53028fb8..239e24b081a9 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -113,6 +113,7 @@ struct hd_struct { #define GENHD_FL_UP 16 #define GENHD_FL_SUPPRESS_PARTITION_INFO 32 #define GENHD_FL_EXT_DEVT 64 /* allow extended devt */ +#define GENHD_FL_NATIVE_CAPACITY 128 #define BLK_SCSI_MAX_CMDS (256) #define BLK_SCSI_CMD_PER_LONG (BLK_SCSI_MAX_CMDS / (sizeof(long) * 8)) -- cgit v1.2.3 From e957b60d1583022a0f7c03267d37fcae2ddb78b1 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 7 Jun 2009 13:52:52 +0200 Subject: ide-gd: implement block device ->set_capacity method (v2) * Use ->probed_capacity to store native device capacity for ATA disks. * Add ->set_capacity method to struct ide_disk_ops. * Implement disk device ->set_capacity method for ATA disks. * Implement block device ->set_capacity method. v2: * Check if LBA and HPA are supported in ide_disk_set_capacity(). * According to the spec the SET MAX ADDRESS command shall be immediately preceded by a READ NATIVE MAX ADDRESS command. * Add ide_disk_hpa_{get_native,set}_capacity() helpers. Together with the previous patch adding ->set_capacity block device method this allows automatic disabling of Host Protected Area (HPA) if any partitions overlapping HPA are detected. Cc: Robert Hancock Cc: Frans Pop Cc: "Andries E. Brouwer" Cc: Al Viro Emphatically-Acked-by: Alan Cox Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ide.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ide.h b/include/linux/ide.h index 9fed365a598b..e96ace12872a 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -397,6 +397,7 @@ struct ide_drive_s; struct ide_disk_ops { int (*check)(struct ide_drive_s *, const char *); int (*get_capacity)(struct ide_drive_s *); + u64 (*set_capacity)(struct ide_drive_s *, u64); void (*setup)(struct ide_drive_s *); void (*flush)(struct ide_drive_s *); int (*init_media)(struct ide_drive_s *, struct gendisk *); @@ -568,8 +569,7 @@ struct ide_drive_s { unsigned int drive_data; /* used by set_pio_mode/dev_select() */ unsigned int failures; /* current failure count */ unsigned int max_failures; /* maximum allowed failure count */ - u64 probed_capacity;/* initial reported media capacity (ide-cd only currently) */ - + u64 probed_capacity;/* initial/native media capacity */ u64 capacity64; /* total number of sectors */ int lun; /* logical unit */ -- cgit v1.2.3 From 075affcbe01d4d7cefcd0e30a98df1253bcf8d92 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 7 Jun 2009 13:52:52 +0200 Subject: ide: preserve Host Protected Area by default (v2) From the perspective of most users of recent systems, disabling Host Protected Area (HPA) can break vendor RAID formats, GPT partitions and risks corrupting firmware or overwriting vendor system recovery tools. Unfortunately the original (kernels < 2.6.30) behavior (unconditionally disabling HPA and using full disk capacity) was introduced at the time when the main use of HPA was to make the drive look small enough for the BIOS to allow the system to boot with large capacity drives. Thus to allow the maximum compatibility with the existing setups (using HPA and partitioned with HPA disabled) we automically disable HPA if any partitions overlapping HPA are detected. Additionally HPA can also be disabled using the "nohpa" module parameter (i.e. "ide_core.nohpa=0.0" to disable HPA on /dev/hda). v2: Fix ->resume HPA support. While at it: - remove stale "idebus=" entry from Documentation/kernel-parameters.txt Cc: Robert Hancock Cc: Frans Pop Cc: "Andries E. Brouwer" Cc: Al Viro Acked-by: Sergei Shtylyov [patch description was based on input from Alan Cox and Frans Pop] Emphatically-Acked-by: Alan Cox Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ide.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ide.h b/include/linux/ide.h index e96ace12872a..45dce3b4c88c 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -475,6 +475,8 @@ enum { IDE_DFLAG_NICE1 = (1 << 5), /* device is physically present */ IDE_DFLAG_PRESENT = (1 << 6), + /* disable Host Protected Area */ + IDE_DFLAG_NOHPA = (1 << 7), /* id read from device (synthetic if not set) */ IDE_DFLAG_ID_READ = (1 << 8), IDE_DFLAG_NOPROBE = (1 << 9), -- cgit v1.2.3 From 8bc1e5aa06a2a9a425c4a6795fc564cba1521487 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 7 Jun 2009 15:37:09 +0200 Subject: ide: respect quirk_drives[] list on all controllers * Add ide_check_nien_quirk_list() helper to the core code and then use it in ide_port_tune_devices(). * Remove no longer needed ->quirkproc methods from hpt366.c and pdc202xx_{new,old}.c. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ide.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/ide.h b/include/linux/ide.h index c8f7b9673710..6caaae0c7743 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1453,6 +1453,7 @@ static inline void ide_acpi_set_state(ide_hwif_t *hwif, int on) {} void ide_register_region(struct gendisk *); void ide_unregister_region(struct gendisk *); +void ide_check_nien_quirk_list(ide_drive_t *); void ide_undecoded_slave(ide_drive_t *); void ide_port_apply_params(ide_hwif_t *); -- cgit v1.2.3 From 734affdcae20af4fec95e46a64fb29f063a15c19 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 7 Jun 2009 15:37:10 +0200 Subject: ide: add IDE_DFLAG_NIEN_QUIRK device flag Add IDE_DFLAG_NIEN_QUIRK device flag and use it instead of drive->quirk_list. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ide.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ide.h b/include/linux/ide.h index 6caaae0c7743..a6c6a2fad7c8 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -499,6 +499,7 @@ enum { /* write protect */ IDE_DFLAG_WP = (1 << 29), IDE_DFLAG_FORMAT_IN_PROGRESS = (1 << 30), + IDE_DFLAG_NIEN_QUIRK = (1 << 31), }; struct ide_drive_s { @@ -530,7 +531,6 @@ struct ide_drive_s { u8 waiting_for_dma; /* dma currently in progress */ u8 dma; /* atapi dma flag */ - u8 quirk_list; /* considered quirky, set for a specific host */ u8 init_speed; /* transfer rate set at boot */ u8 current_speed; /* current transfer rate set */ u8 desired_speed; /* desired transfer rate set */ -- cgit v1.2.3 From eae3f29cc73f83cc3f1891d3ad40021b5172c630 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 5 Jun 2009 04:03:35 +0000 Subject: net: num_dma_maps is not used Get rid of num_dma_maps in struct skb_shared_info, as it seems unused. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/skbuff.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 7305da92be8f..7485058125e3 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -194,9 +194,6 @@ struct skb_shared_info { unsigned short gso_type; __be32 ip6_frag_id; union skb_shared_tx tx_flags; -#ifdef CONFIG_HAS_DMA - unsigned int num_dma_maps; -#endif struct sk_buff *frag_list; struct skb_shared_hwtstamps hwtstamps; skb_frag_t frags[MAX_SKB_FRAGS]; -- cgit v1.2.3 From 042a53a9e437feaf2230dd2cadcecfae9c7bfe05 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 5 Jun 2009 04:04:16 +0000 Subject: net: skb_shared_info optimization skb_dma_unmap() is quite expensive for small packets, because we use two different cache lines from skb_shared_info. One to access nr_frags, one to access dma_maps[0] Instead of dma_maps being an array of MAX_SKB_FRAGS + 1 elements, let dma_head alone in a new dma_head field, close to nr_frags, to reduce cache lines misses. Tested on my dev machine (bnx2 & tg3 adapters), nice speedup ! Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/skbuff.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 7485058125e3..aad484cd5863 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -189,6 +189,9 @@ struct skb_shared_info { atomic_t dataref; unsigned short nr_frags; unsigned short gso_size; +#ifdef CONFIG_HAS_DMA + dma_addr_t dma_head; +#endif /* Warning: this field is not always filled in (UFO)! */ unsigned short gso_segs; unsigned short gso_type; @@ -198,7 +201,7 @@ struct skb_shared_info { struct skb_shared_hwtstamps hwtstamps; skb_frag_t frags[MAX_SKB_FRAGS]; #ifdef CONFIG_HAS_DMA - dma_addr_t dma_maps[MAX_SKB_FRAGS + 1]; + dma_addr_t dma_maps[MAX_SKB_FRAGS]; #endif /* Intermediate layers must ensure that destructor_arg * remains valid until skb destructor */ -- cgit v1.2.3 From 4e329972052c3649367b91de783f6293b8653cb2 Mon Sep 17 00:00:00 2001 From: Tilman Schmidt Date: Sun, 7 Jun 2009 09:09:23 +0000 Subject: isdn: rename capi_ctr_reseted() to capi_ctr_down() Change the name of the Kernel CAPI exported function capi_ctr_reseted() to something representing its purpose better. Impact: renaming, no functional change Signed-off-by: Tilman Schmidt Signed-off-by: David S. Miller --- include/linux/isdn/capilli.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/isdn/capilli.h b/include/linux/isdn/capilli.h index 35e9b0fd014b..7acb87a44872 100644 --- a/include/linux/isdn/capilli.h +++ b/include/linux/isdn/capilli.h @@ -79,7 +79,7 @@ int attach_capi_ctr(struct capi_ctr *); int detach_capi_ctr(struct capi_ctr *); void capi_ctr_ready(struct capi_ctr * card); -void capi_ctr_reseted(struct capi_ctr * card); +void capi_ctr_down(struct capi_ctr * card); void capi_ctr_suspend_output(struct capi_ctr * card); void capi_ctr_resume_output(struct capi_ctr * card); void capi_ctr_handle_message(struct capi_ctr * card, u16 appl, struct sk_buff *skb); -- cgit v1.2.3 From 11eeef41d5f63c7d2f7fdfcc733eb7fb137cc384 Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Mon, 8 Jun 2009 17:01:51 +0200 Subject: netfilter: passive OS fingerprint xtables match Passive OS fingerprinting netfilter module allows to passively detect remote OS and perform various netfilter actions based on that knowledge. This module compares some data (WS, MSS, options and it's order, ttl, df and others) from packets with SYN bit set with dynamically loaded OS fingerprints. Fingerprint matching rules can be downloaded from OpenBSD source tree or found in archive and loaded via netfilter netlink subsystem into the kernel via special util found in archive. Archive contains library file (also attached), which was shipped with iptables extensions some time ago (at least when ipt_osf existed in patch-o-matic). Following changes were made in this release: * added NLM_F_CREATE/NLM_F_EXCL checks * dropped _rcu list traversing helpers in the protected add/remove calls * dropped unneded structures, debug prints, obscure comment and check Fingerprints can be downloaded from http://www.openbsd.org/cgi-bin/cvsweb/src/etc/pf.os or can be found in archive Example usage: -d switch removes fingerprints Please consider for inclusion. Thank you. Passive OS fingerprint homepage (archives, examples): http://www.ioremap.net/projects/osf Signed-off-by: Evgeniy Polyakov Signed-off-by: Patrick McHardy --- include/linux/netfilter/Kbuild | 1 + include/linux/netfilter/nfnetlink.h | 3 +- include/linux/netfilter/xt_osf.h | 133 ++++++++++++++++++++++++++++++++++++ 3 files changed, 136 insertions(+), 1 deletion(-) create mode 100644 include/linux/netfilter/xt_osf.h (limited to 'include/linux') diff --git a/include/linux/netfilter/Kbuild b/include/linux/netfilter/Kbuild index af9d2fb97212..2aea50399c0b 100644 --- a/include/linux/netfilter/Kbuild +++ b/include/linux/netfilter/Kbuild @@ -33,6 +33,7 @@ header-y += xt_limit.h header-y += xt_mac.h header-y += xt_mark.h header-y += xt_multiport.h +header-y += xt_osf.h header-y += xt_owner.h header-y += xt_pkttype.h header-y += xt_quota.h diff --git a/include/linux/netfilter/nfnetlink.h b/include/linux/netfilter/nfnetlink.h index 2214e5161461..bff4d5741d98 100644 --- a/include/linux/netfilter/nfnetlink.h +++ b/include/linux/netfilter/nfnetlink.h @@ -46,7 +46,8 @@ struct nfgenmsg { #define NFNL_SUBSYS_CTNETLINK_EXP 2 #define NFNL_SUBSYS_QUEUE 3 #define NFNL_SUBSYS_ULOG 4 -#define NFNL_SUBSYS_COUNT 5 +#define NFNL_SUBSYS_OSF 5 +#define NFNL_SUBSYS_COUNT 6 #ifdef __KERNEL__ diff --git a/include/linux/netfilter/xt_osf.h b/include/linux/netfilter/xt_osf.h new file mode 100644 index 000000000000..fd2272e0959a --- /dev/null +++ b/include/linux/netfilter/xt_osf.h @@ -0,0 +1,133 @@ +/* + * Copyright (c) 2003+ Evgeniy Polyakov + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _XT_OSF_H +#define _XT_OSF_H + +#define MAXGENRELEN 32 + +#define XT_OSF_GENRE (1<<0) +#define XT_OSF_TTL (1<<1) +#define XT_OSF_LOG (1<<2) +#define XT_OSF_INVERT (1<<3) + +#define XT_OSF_LOGLEVEL_ALL 0 /* log all matched fingerprints */ +#define XT_OSF_LOGLEVEL_FIRST 1 /* log only the first matced fingerprint */ +#define XT_OSF_LOGLEVEL_ALL_KNOWN 2 /* do not log unknown packets */ + +#define XT_OSF_TTL_TRUE 0 /* True ip and fingerprint TTL comparison */ +#define XT_OSF_TTL_LESS 1 /* Check if ip TTL is less than fingerprint one */ +#define XT_OSF_TTL_NOCHECK 2 /* Do not compare ip and fingerprint TTL at all */ + +struct xt_osf_info { + char genre[MAXGENRELEN]; + __u32 len; + __u32 flags; + __u32 loglevel; + __u32 ttl; +}; + +/* + * Wildcard MSS (kind of). + * It is used to implement a state machine for the different wildcard values + * of the MSS and window sizes. + */ +struct xt_osf_wc { + __u32 wc; + __u32 val; +}; + +/* + * This struct represents IANA options + * http://www.iana.org/assignments/tcp-parameters + */ +struct xt_osf_opt { + __u16 kind, length; + struct xt_osf_wc wc; +}; + +struct xt_osf_user_finger { + struct xt_osf_wc wss; + + __u8 ttl, df; + __u16 ss, mss; + __u16 opt_num; + + char genre[MAXGENRELEN]; + char version[MAXGENRELEN]; + char subtype[MAXGENRELEN]; + + /* MAX_IPOPTLEN is maximum if all options are NOPs or EOLs */ + struct xt_osf_opt opt[MAX_IPOPTLEN]; +}; + +struct xt_osf_nlmsg { + struct xt_osf_user_finger f; + struct iphdr ip; + struct tcphdr tcp; +}; + +/* Defines for IANA option kinds */ + +enum iana_options { + OSFOPT_EOL = 0, /* End of options */ + OSFOPT_NOP, /* NOP */ + OSFOPT_MSS, /* Maximum segment size */ + OSFOPT_WSO, /* Window scale option */ + OSFOPT_SACKP, /* SACK permitted */ + OSFOPT_SACK, /* SACK */ + OSFOPT_ECHO, + OSFOPT_ECHOREPLY, + OSFOPT_TS, /* Timestamp option */ + OSFOPT_POCP, /* Partial Order Connection Permitted */ + OSFOPT_POSP, /* Partial Order Service Profile */ + + /* Others are not used in the current OSF */ + OSFOPT_EMPTY = 255, +}; + +/* + * Initial window size option state machine: multiple of mss, mtu or + * plain numeric value. Can also be made as plain numeric value which + * is not a multiple of specified value. + */ +enum xt_osf_window_size_options { + OSF_WSS_PLAIN = 0, + OSF_WSS_MSS, + OSF_WSS_MTU, + OSF_WSS_MODULO, + OSF_WSS_MAX, +}; + +/* + * Add/remove fingerprint from the kernel. + */ +enum xt_osf_msg_types { + OSF_MSG_ADD, + OSF_MSG_REMOVE, + OSF_MSG_MAX, +}; + +enum xt_osf_attr_type { + OSF_ATTR_UNSPEC, + OSF_ATTR_FINGER, + OSF_ATTR_MAX, +}; + +#endif /* _XT_OSF_H */ -- cgit v1.2.3 From 226c7ffe74474257b4b87bd38ae8ba0030cf65e2 Mon Sep 17 00:00:00 2001 From: Joe Eykholt Date: Wed, 6 May 2009 10:52:51 -0700 Subject: [SCSI] net, libfcoe: Add the FCoE Initialization Protocol ethertype FIP is the FCoE Initialization Protocol and this patch adds the protocol ethertype to the kernel's list of ethertypes. Signed-off-by: Joe Eykholt Signed-off-by: Robert Love Acked-by: David S. Miller Signed-off-by: James Bottomley --- include/linux/if_ether.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h index cfe4fe1b7132..60e8934d10b5 100644 --- a/include/linux/if_ether.h +++ b/include/linux/if_ether.h @@ -79,6 +79,7 @@ #define ETH_P_AOE 0x88A2 /* ATA over Ethernet */ #define ETH_P_TIPC 0x88CA /* TIPC */ #define ETH_P_FCOE 0x8906 /* Fibre Channel over Ethernet */ +#define ETH_P_FIP 0x8914 /* FCoE Initialization Protocol */ #define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */ /* -- cgit v1.2.3 From ee0398717078260ee4ffa97d407071bc774e2dac Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 9 Jun 2009 00:17:13 -0700 Subject: skbuff: Add frag list abstraction interfaces. With the hope that these can be used to eliminate direct references to the frag list implementation. Signed-off-by: David S. Miller --- include/linux/skbuff.h | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index aad484cd5863..f1c93b878b3b 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -1077,7 +1077,7 @@ extern void skb_add_rx_frag(struct sk_buff *skb, int i, struct page *page, int off, int size); #define SKB_PAGE_ASSERT(skb) BUG_ON(skb_shinfo(skb)->nr_frags) -#define SKB_FRAG_ASSERT(skb) BUG_ON(skb_shinfo(skb)->frag_list) +#define SKB_FRAG_ASSERT(skb) BUG_ON(skb_has_frags(skb)) #define SKB_LINEAR_ASSERT(skb) BUG_ON(skb_is_nonlinear(skb)) #ifdef NET_SKBUFF_DATA_USES_OFFSET @@ -1716,6 +1716,25 @@ static inline int pskb_trim_rcsum(struct sk_buff *skb, unsigned int len) skb = skb->prev) +static inline bool skb_has_frags(const struct sk_buff *skb) +{ + return skb_shinfo(skb)->frag_list != NULL; +} + +static inline void skb_frag_list_init(struct sk_buff *skb) +{ + skb_shinfo(skb)->frag_list = NULL; +} + +static inline void skb_frag_add_head(struct sk_buff *skb, struct sk_buff *frag) +{ + frag->next = skb_shinfo(skb)->frag_list; + skb_shinfo(skb)->frag_list = frag; +} + +#define skb_walk_frags(skb, iter) \ + for (iter = skb_shinfo(skb)->frag_list; iter; iter = iter->next) + extern struct sk_buff *__skb_recv_datagram(struct sock *sk, unsigned flags, int *peeked, int *err); extern struct sk_buff *skb_recv_datagram(struct sock *sk, unsigned flags, -- cgit v1.2.3 From a5bd8a13e9e0322c7f76b34790ba34e2e0ce2ac5 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 9 Jun 2009 00:17:27 -0700 Subject: netdevice.h: Use frag list abstraction interfaces. Signed-off-by: David S. Miller --- include/linux/netdevice.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 2a801380b502..9ea8d6dfe540 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1904,7 +1904,7 @@ static inline int net_gso_ok(int features, int gso_type) static inline int skb_gso_ok(struct sk_buff *skb, int features) { return net_gso_ok(features, skb_shinfo(skb)->gso_type) && - (!skb_shinfo(skb)->frag_list || (features & NETIF_F_FRAGLIST)); + (!skb_has_frags(skb) || (features & NETIF_F_FRAGLIST)); } static inline int netif_needs_gso(struct net_device *dev, struct sk_buff *skb) -- cgit v1.2.3 From 151060ac13144208bd7601d17e4c92c59b98072f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 14 Apr 2009 10:54:54 +0900 Subject: CUSE: implement CUSE - Character device in Userspace CUSE enables implementing character devices in userspace. With recent additions of ioctl and poll support, FUSE already has most of what's necessary to implement character devices. All CUSE has to do is bonding all those components - FUSE, chardev and the driver model - nicely. When client opens /dev/cuse, kernel starts conversation with CUSE_INIT. The client tells CUSE which device it wants to create. As the previous patch made fuse_file usable without associated fuse_inode, CUSE doesn't create super block or inodes. It attaches fuse_file to cdev file->private_data during open and set ff->fi to NULL. The rest of the operation is almost identical to FUSE direct IO case. Each CUSE device has a corresponding directory /sys/class/cuse/DEVNAME (which is symlink to /sys/devices/virtual/class/DEVNAME if SYSFS_DEPRECATED is turned off) which hosts "waiting" and "abort" among other things. Those two files have the same meaning as the FUSE control files. The only notable lacking feature compared to in-kernel implementation is mmap support. Signed-off-by: Tejun Heo Signed-off-by: Miklos Szeredi --- include/linux/fuse.h | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) (limited to 'include/linux') diff --git a/include/linux/fuse.h b/include/linux/fuse.h index 162e5defe683..d41ed593f79f 100644 --- a/include/linux/fuse.h +++ b/include/linux/fuse.h @@ -120,6 +120,13 @@ struct fuse_file_lock { #define FUSE_EXPORT_SUPPORT (1 << 4) #define FUSE_BIG_WRITES (1 << 5) +/** + * CUSE INIT request/reply flags + * + * CUSE_UNRESTRICTED_IOCTL: use unrestricted ioctl + */ +#define CUSE_UNRESTRICTED_IOCTL (1 << 0) + /** * Release flags */ @@ -210,6 +217,9 @@ enum fuse_opcode { FUSE_DESTROY = 38, FUSE_IOCTL = 39, FUSE_POLL = 40, + + /* CUSE specific operations */ + CUSE_INIT = 4096, }; enum fuse_notify_code { @@ -401,6 +411,27 @@ struct fuse_init_out { __u32 max_write; }; +#define CUSE_INIT_INFO_MAX 4096 + +struct cuse_init_in { + __u32 major; + __u32 minor; + __u32 unused; + __u32 flags; +}; + +struct cuse_init_out { + __u32 major; + __u32 minor; + __u32 unused; + __u32 flags; + __u32 max_read; + __u32 max_write; + __u32 dev_major; /* chardev major */ + __u32 dev_minor; /* chardev minor */ + __u32 spare[10]; +}; + struct fuse_interrupt_in { __u64 unique; }; -- cgit v1.2.3 From fcb94e422479da52ed90bab230c59617a0462416 Mon Sep 17 00:00:00 2001 From: Sergey Lapin Date: Mon, 8 Jun 2009 12:18:47 +0000 Subject: Add constants for the ieee 802.15.4 stack IEEE 802.15.4 stack requires several constants to be defined/adjusted. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Sergey Lapin Signed-off-by: David S. Miller --- include/linux/if_arp.h | 2 ++ include/linux/if_ether.h | 1 + include/linux/socket.h | 4 +++- 3 files changed, 6 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/if_arp.h b/include/linux/if_arp.h index 5ff89809a581..b554300ef8bf 100644 --- a/include/linux/if_arp.h +++ b/include/linux/if_arp.h @@ -86,6 +86,8 @@ #define ARPHRD_IEEE80211 801 /* IEEE 802.11 */ #define ARPHRD_IEEE80211_PRISM 802 /* IEEE 802.11 + Prism2 header */ #define ARPHRD_IEEE80211_RADIOTAP 803 /* IEEE 802.11 + radiotap header */ +#define ARPHRD_IEEE802154 804 +#define ARPHRD_IEEE802154_PHY 805 #define ARPHRD_PHONET 820 /* PhoNet media type */ #define ARPHRD_PHONET_PIPE 821 /* PhoNet pipe header */ diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h index cfe4fe1b7132..11a60e4f0a66 100644 --- a/include/linux/if_ether.h +++ b/include/linux/if_ether.h @@ -106,6 +106,7 @@ #define ETH_P_DSA 0x001B /* Distributed Switch Arch. */ #define ETH_P_TRAILER 0x001C /* Trailer switch tagging */ #define ETH_P_PHONET 0x00F5 /* Nokia Phonet frames */ +#define ETH_P_IEEE802154 0x00F6 /* IEEE802.15.4 frame */ /* * This is an Ethernet frame header. diff --git a/include/linux/socket.h b/include/linux/socket.h index d2310cb45d2f..3b461dffe244 100644 --- a/include/linux/socket.h +++ b/include/linux/socket.h @@ -194,7 +194,8 @@ struct ucred { #define AF_RXRPC 33 /* RxRPC sockets */ #define AF_ISDN 34 /* mISDN sockets */ #define AF_PHONET 35 /* Phonet sockets */ -#define AF_MAX 36 /* For now.. */ +#define AF_IEEE802154 36 /* IEEE802154 sockets */ +#define AF_MAX 37 /* For now.. */ /* Protocol families, same as address families. */ #define PF_UNSPEC AF_UNSPEC @@ -233,6 +234,7 @@ struct ucred { #define PF_RXRPC AF_RXRPC #define PF_ISDN AF_ISDN #define PF_PHONET AF_PHONET +#define PF_IEEE802154 AF_IEEE802154 #define PF_MAX AF_MAX /* Maximum queue length specifiable by listen. */ -- cgit v1.2.3 From 2c21d11518b688cd4c8e7ddfcd4ba41482ad075b Mon Sep 17 00:00:00 2001 From: Sergey Lapin Date: Mon, 8 Jun 2009 12:18:49 +0000 Subject: net: add NL802154 interface for configuration of 802.15.4 devices Add a netlink interface for configuration of IEEE 802.15.4 device. Also this interface specifies events notification sent by devices towards higher layers. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Sergey Lapin Signed-off-by: David S. Miller --- include/linux/nl802154.h | 119 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 119 insertions(+) create mode 100644 include/linux/nl802154.h (limited to 'include/linux') diff --git a/include/linux/nl802154.h b/include/linux/nl802154.h new file mode 100644 index 000000000000..2cda00ccfcca --- /dev/null +++ b/include/linux/nl802154.h @@ -0,0 +1,119 @@ +/* + * nl802154.h + * + * Copyright (C) 2007, 2008, 2009 Siemens AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + * + */ + +#ifndef NL802154_H +#define NL802154_H + +#define IEEE802154_NL_NAME "802.15.4 MAC" +#define IEEE802154_MCAST_COORD_NAME "coordinator" +#define IEEE802154_MCAST_BEACON_NAME "beacon" + +enum { + __IEEE802154_ATTR_INVALID, + + IEEE802154_ATTR_DEV_NAME, + IEEE802154_ATTR_DEV_INDEX, + + IEEE802154_ATTR_STATUS, + + IEEE802154_ATTR_SHORT_ADDR, + IEEE802154_ATTR_HW_ADDR, + IEEE802154_ATTR_PAN_ID, + + IEEE802154_ATTR_CHANNEL, + + IEEE802154_ATTR_COORD_SHORT_ADDR, + IEEE802154_ATTR_COORD_HW_ADDR, + IEEE802154_ATTR_COORD_PAN_ID, + + IEEE802154_ATTR_SRC_SHORT_ADDR, + IEEE802154_ATTR_SRC_HW_ADDR, + IEEE802154_ATTR_SRC_PAN_ID, + + IEEE802154_ATTR_DEST_SHORT_ADDR, + IEEE802154_ATTR_DEST_HW_ADDR, + IEEE802154_ATTR_DEST_PAN_ID, + + IEEE802154_ATTR_CAPABILITY, + IEEE802154_ATTR_REASON, + IEEE802154_ATTR_SCAN_TYPE, + IEEE802154_ATTR_CHANNELS, + IEEE802154_ATTR_DURATION, + IEEE802154_ATTR_ED_LIST, + IEEE802154_ATTR_BCN_ORD, + IEEE802154_ATTR_SF_ORD, + IEEE802154_ATTR_PAN_COORD, + IEEE802154_ATTR_BAT_EXT, + IEEE802154_ATTR_COORD_REALIGN, + IEEE802154_ATTR_SEC, + + __IEEE802154_ATTR_MAX, +}; + +#define IEEE802154_ATTR_MAX (__IEEE802154_ATTR_MAX - 1) + +extern struct nla_policy ieee802154_policy[]; + +/* commands */ +/* REQ should be responded with CONF + * and INDIC with RESP + */ +enum { + __IEEE802154_COMMAND_INVALID, + + IEEE802154_ASSOCIATE_REQ, + IEEE802154_ASSOCIATE_CONF, + IEEE802154_DISASSOCIATE_REQ, + IEEE802154_DISASSOCIATE_CONF, + IEEE802154_GET_REQ, + IEEE802154_GET_CONF, + IEEE802154_RESET_REQ, + IEEE802154_RESET_CONF, + IEEE802154_SCAN_REQ, + IEEE802154_SCAN_CONF, + IEEE802154_SET_REQ, + IEEE802154_SET_CONF, + IEEE802154_START_REQ, + IEEE802154_START_CONF, + IEEE802154_SYNC_REQ, + IEEE802154_POLL_REQ, + IEEE802154_POLL_CONF, + + IEEE802154_ASSOCIATE_INDIC, + IEEE802154_ASSOCIATE_RESP, + IEEE802154_DISASSOCIATE_INDIC, + IEEE802154_BEACON_NOTIFY_INDIC, + IEEE802154_ORPHAN_INDIC, + IEEE802154_ORPHAN_RESP, + IEEE802154_COMM_STATUS_INDIC, + IEEE802154_SYNC_LOSS_INDIC, + + IEEE802154_GTS_REQ, /* Not supported yet */ + IEEE802154_GTS_INDIC, /* Not supported yet */ + IEEE802154_GTS_CONF, /* Not supported yet */ + IEEE802154_RX_ENABLE_REQ, /* Not supported yet */ + IEEE802154_RX_ENABLE_CONF, /* Not supported yet */ + + __IEEE802154_CMD_MAX, +}; + +#define IEEE802154_CMD_MAX (__IEEE802154_CMD_MAX - 1) + +#endif -- cgit v1.2.3 From 18760f1e74e8dfe8f30d4891e66163d1e6feb893 Mon Sep 17 00:00:00 2001 From: Chaitanya Lala Date: Mon, 8 Jun 2009 14:28:54 +0000 Subject: e1000e: Expose MDI-X status via ethtool change Ethtool is a standard way of getting information about ethernet interfaces. We enhance ethtool kernel interface & e1000e to make the MDI-X status readable via ethtool in userspace. Signed-off-by: Chaitanya Lala Signed-off-by: Arthur Jones Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- include/linux/ethtool.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index 380b04272bf1..9b660bd2e2b3 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -30,7 +30,8 @@ struct ethtool_cmd { __u32 maxtxpkt; /* Tx pkts before generating tx int */ __u32 maxrxpkt; /* Rx pkts before generating rx int */ __u16 speed_hi; - __u16 reserved2; + __u8 eth_tp_mdix; + __u8 reserved2; __u32 lp_advertising; /* Features the link partner advertises */ __u32 reserved[2]; }; @@ -632,6 +633,11 @@ struct ethtool_ops { #define AUTONEG_DISABLE 0x00 #define AUTONEG_ENABLE 0x01 +/* Mode MDI or MDI-X */ +#define ETH_TP_MDI_INVALID 0x00 +#define ETH_TP_MDI 0x01 +#define ETH_TP_MDI_X 0x02 + /* Wake-On-Lan options. */ #define WAKE_PHY (1 << 0) #define WAKE_UCAST (1 << 1) -- cgit v1.2.3 From a31e1ffd2231b8fdf7eda9ed750a4a0df9bcad4e Mon Sep 17 00:00:00 2001 From: Laszlo Attila Toth Date: Tue, 9 Jun 2009 15:16:34 +0200 Subject: netfilter: xt_socket: added new revision of the 'socket' match supporting flags If the XT_SOCKET_TRANSPARENT flag is set, enabled 'transparent' socket option is required for the socket to be matched. Signed-off-by: Laszlo Attila Toth Signed-off-by: Patrick McHardy --- include/linux/netfilter/xt_socket.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) create mode 100644 include/linux/netfilter/xt_socket.h (limited to 'include/linux') diff --git a/include/linux/netfilter/xt_socket.h b/include/linux/netfilter/xt_socket.h new file mode 100644 index 000000000000..6f475b8ff34b --- /dev/null +++ b/include/linux/netfilter/xt_socket.h @@ -0,0 +1,12 @@ +#ifndef _XT_SOCKET_H +#define _XT_SOCKET_H + +enum { + XT_SOCKET_TRANSPARENT = 1 << 0, +}; + +struct xt_socket_mtinfo1 { + __u8 flags; +}; + +#endif /* _XT_SOCKET_H */ -- cgit v1.2.3 From fd6c3a8dc44329d3aff9a578b5120982f63711ee Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 12 Mar 2009 10:58:33 +0000 Subject: initconst adjustments - add .init.rodata to INIT_DATA, and group all initconst flavors together - move strings generated from __setup_param() into .init.rodata - add .*init.rodata to modpost's sets of init sections - make modpost warn about references between meminit and cpuinit as well as memexit and cpuexit sections (as CPU and memory hotplug are independently selectable features) Signed-off-by: Jan Beulich Signed-off-by: Sam Ravnborg --- include/linux/init.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/init.h b/include/linux/init.h index 0e06c176f185..9f70c9f25d4b 100644 --- a/include/linux/init.h +++ b/include/linux/init.h @@ -225,7 +225,8 @@ struct obs_kernel_param { * obs_kernel_param "array" too far apart in .init.setup. */ #define __setup_param(str, unique_id, fn, early) \ - static char __setup_str_##unique_id[] __initdata __aligned(1) = str; \ + static const char __setup_str_##unique_id[] __initconst \ + __aligned(1) = str; \ static struct obs_kernel_param __setup_##unique_id \ __used __section(.init.setup) \ __attribute__((aligned((sizeof(long))))) \ -- cgit v1.2.3 From 1506e30b5f25f6c3357167a18f0e4ae6f5662a28 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 9 Jun 2009 17:49:06 -0700 Subject: rfkill: include err.h Since we use ERR_PTR and similar macros, we need to include linux/err.h. Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- include/linux/rfkill.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index ee3eddea8568..d7e818ad0bc4 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -105,6 +105,7 @@ enum rfkill_user_states { #include #include #include +#include /* this is opaque */ struct rfkill; -- cgit v1.2.3 From 4d1d49858c0a5a4fb1be4bc7972754cd640245ba Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Thu, 4 Jun 2009 21:57:03 +0200 Subject: net/libertas: remove GPIO-CS handling in SPI interface code This removes the dependency on GPIO framework and lets the SPI host driver handle the chip select. The SPI host driver is required to keep the CS active for the entire message unless cs_change says otherwise. This patch collects the two/three single SPI transfers into a message. Also the delay in read path in case use_dummy_writes are not used is moved into the SPI host driver. Tested-by: Mike Rapoport Tested-by: Andrey Yurovsky Signed-off-by: Sebastian Andrzej Siewior Acked-by: Dan Williams Signed-off-by: John W. Linville --- include/linux/spi/libertas_spi.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/spi/libertas_spi.h b/include/linux/spi/libertas_spi.h index 79506f5f9e67..1b5d5384fcd3 100644 --- a/include/linux/spi/libertas_spi.h +++ b/include/linux/spi/libertas_spi.h @@ -22,9 +22,6 @@ struct libertas_spi_platform_data { * speed, you may want to use 0 here. */ u16 use_dummy_writes; - /* GPIO number to use as chip select */ - u16 gpio_cs; - /* Board specific setup/teardown */ int (*setup)(struct spi_device *spi); int (*teardown)(struct spi_device *spi); -- cgit v1.2.3 From 8f77f3849cc3ae2d6df9301785a3d316ea7d7ee1 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 7 Jun 2009 21:58:37 +0200 Subject: mac80211: do not pass PS frames out of mac80211 again In order to handle powersave frames properly we had needed to pass these out to the device queues again, and introduce the skb->requeue bit. This, however, also has unnecessary overhead by needing to 'clean up' already tried frames, and this clean-up code is also buggy when software encryption is used. Instead of sending the frames via the master netdev queue again, simply put them into the pending queue. This also fixes a problem where frames for that particular station could be reordered when some were still on the software queues and older ones are re-injected into the software queue after them. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/skbuff.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index f1c93b878b3b..fa51293f2708 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -304,9 +304,6 @@ typedef unsigned char *sk_buff_data_t; * @tc_verd: traffic control verdict * @ndisc_nodetype: router type (from link layer) * @do_not_encrypt: set to prevent encryption of this frame - * @requeue: set to indicate that the wireless core should attempt - * a software retry on this frame if we failed to - * receive an ACK for it * @dma_cookie: a cookie to one of several possible DMA operations * done by skb DMA functions * @secmark: security marking @@ -380,7 +377,6 @@ struct sk_buff { #endif #if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE) __u8 do_not_encrypt:1; - __u8 requeue:1; #endif /* 0/13/14 bit hole */ -- cgit v1.2.3 From b3fa1329eaf2a7b97124dacf5b663fd51346ac19 Mon Sep 17 00:00:00 2001 From: Alan Jenkins Date: Mon, 8 Jun 2009 13:27:27 +0100 Subject: rfkill: remove set_global_sw_state rfkill_set_global_sw_state() (previously rfkill_set_default()) will no longer be exported by the rewritten rfkill core. Instead, platform drivers which can provide persistent soft-rfkill state across power-down/reboot should indicate their initial state by calling rfkill_set_sw_state() before registration. Otherwise, they will be initialized to a default value during registration by a set_block call. We remove existing calls to rfkill_set_sw_state() which happen before registration, since these had no effect in the old model. If these drivers do have persistent state, the calls can be put back (subject to testing :-). This affects hp-wmi and acer-wmi. Drivers with persistent state will affect the global state only if rfkill-input is enabled. This is required, otherwise booting with wireless soft-blocked and pressing the wireless-toggle key once would have no apparent effect. This special case will be removed in future along with rfkill-input, in favour of a more flexible userspace daemon (see Documentation/feature-removal-schedule.txt). Now rfkill_global_states[n].def is only used to preserve global states over EPO, it is renamed to ".sav". Signed-off-by: Alan Jenkins Acked-by: Henrique de Moraes Holschuh Signed-off-by: John W. Linville --- include/linux/rfkill.h | 28 ++++++++-------------------- 1 file changed, 8 insertions(+), 20 deletions(-) (limited to 'include/linux') diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index d7e818ad0bc4..c1dca0b8138b 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -157,8 +157,14 @@ struct rfkill * __must_check rfkill_alloc(const char *name, * @rfkill: rfkill structure to be registered * * This function should be called by the transmitter driver to register - * the rfkill structure needs to be registered. Before calling this function - * the driver needs to be ready to service method calls from rfkill. + * the rfkill structure. Before calling this function the driver needs + * to be ready to service method calls from rfkill. + * + * If the software blocked state is not set before registration, + * set_block will be called to initialize it to a default value. + * + * If the hardware blocked state is not set before registration, + * it is assumed to be unblocked. */ int __must_check rfkill_register(struct rfkill *rfkill); @@ -250,19 +256,6 @@ bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked); */ void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw); -/** - * rfkill_set_global_sw_state - set global sw block default - * @type: rfkill type to set default for - * @blocked: default to set - * - * This function sets the global default -- use at boot if your platform has - * an rfkill switch. If not early enough this call may be ignored. - * - * XXX: instead of ignoring -- how about just updating all currently - * registered drivers? - */ -void rfkill_set_global_sw_state(const enum rfkill_type type, bool blocked); - /** * rfkill_blocked - query rfkill block * @@ -317,11 +310,6 @@ static inline void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw) { } -static inline void rfkill_set_global_sw_state(const enum rfkill_type type, - bool blocked) -{ -} - static inline bool rfkill_blocked(struct rfkill *rfkill) { return false; -- cgit v1.2.3 From 908209c160da8ecb68052111972b7a21310eac3f Mon Sep 17 00:00:00 2001 From: Alan Jenkins Date: Mon, 8 Jun 2009 13:12:23 +0100 Subject: rfkill: don't impose global states on resume (just restore the previous states) Once rfkill-input is disabled, the "global" states will only be used as default initial states. Since the states will always be the same after resume, we shouldn't generate events on resume. Signed-off-by: Alan Jenkins Signed-off-by: John W. Linville --- include/linux/rfkill.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index c1dca0b8138b..16e39c7a67fc 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -212,7 +212,7 @@ void rfkill_destroy(struct rfkill *rfkill); * * rfkill drivers that get events when the hard-blocked state changes * use this function to notify the rfkill core (and through that also - * userspace) of the current state -- they should also use this after + * userspace) of the current state. They should also use this after * resume if the state could have changed. * * You need not (but may) call this function if poll_state is assigned. @@ -234,8 +234,9 @@ bool __must_check rfkill_set_hw_state(struct rfkill *rfkill, bool blocked); * rfkill drivers that get events when the soft-blocked state changes * (yes, some platforms directly act on input but allow changing again) * use this function to notify the rfkill core (and through that also - * userspace) of the current state -- they should also use this after - * resume if the state could have changed. + * userspace) of the current state. It is not necessary to notify on + * resume; since hibernation can always change the soft-blocked state, + * the rfkill core will unconditionally restore the previous state. * * This function can be called in any context, even from within rfkill * callbacks. -- cgit v1.2.3 From b43d65f7e818485664037a46367cfb15af05bd8c Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 9 Jun 2009 08:11:42 +0100 Subject: [ARM] 5546/1: ARM PL022 SSP/SPI driver v3 This adds a driver for the ARM PL022 PrimeCell SSP/SPI driver found in the U300 platforms as well as in some ARM reference hardware, and in a modified version on the Nomadik board. Reviewed-by: Alessandro Rubini Reviewed-by: Russell King Reviewed-by: Baruch Siach Signed-off-by: Linus Walleij Signed-off-by: Russell King --- include/linux/amba/pl022.h | 264 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 264 insertions(+) create mode 100644 include/linux/amba/pl022.h (limited to 'include/linux') diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h new file mode 100644 index 000000000000..dcad0ffd1755 --- /dev/null +++ b/include/linux/amba/pl022.h @@ -0,0 +1,264 @@ +/* + * include/linux/amba/pl022.h + * + * Copyright (C) 2008-2009 ST-Ericsson AB + * Copyright (C) 2006 STMicroelectronics Pvt. Ltd. + * + * Author: Linus Walleij + * + * Initial version inspired by: + * linux-2.6.17-rc3-mm1/drivers/spi/pxa2xx_spi.c + * Initial adoption to PL022 by: + * Sachin Verma + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _SSP_PL022_H +#define _SSP_PL022_H + +#include + +/** + * whether SSP is in loopback mode or not + */ +enum ssp_loopback { + LOOPBACK_DISABLED, + LOOPBACK_ENABLED +}; + +/** + * enum ssp_interface - interfaces allowed for this SSP Controller + * @SSP_INTERFACE_MOTOROLA_SPI: Motorola Interface + * @SSP_INTERFACE_TI_SYNC_SERIAL: Texas Instrument Synchronous Serial + * interface + * @SSP_INTERFACE_NATIONAL_MICROWIRE: National Semiconductor Microwire + * interface + * @SSP_INTERFACE_UNIDIRECTIONAL: Unidirectional interface (STn8810 + * &STn8815 only) + */ +enum ssp_interface { + SSP_INTERFACE_MOTOROLA_SPI, + SSP_INTERFACE_TI_SYNC_SERIAL, + SSP_INTERFACE_NATIONAL_MICROWIRE, + SSP_INTERFACE_UNIDIRECTIONAL +}; + +/** + * enum ssp_hierarchy - whether SSP is configured as Master or Slave + */ +enum ssp_hierarchy { + SSP_MASTER, + SSP_SLAVE +}; + +/** + * enum ssp_clock_params - clock parameters, to set SSP clock at a + * desired freq + */ +struct ssp_clock_params { + u8 cpsdvsr; /* value from 2 to 254 (even only!) */ + u8 scr; /* value from 0 to 255 */ +}; + +/** + * enum ssp_rx_endian - endianess of Rx FIFO Data + */ +enum ssp_rx_endian { + SSP_RX_MSB, + SSP_RX_LSB +}; + +/** + * enum ssp_tx_endian - endianess of Tx FIFO Data + */ +enum ssp_tx_endian { + SSP_TX_MSB, + SSP_TX_LSB +}; + +/** + * enum ssp_data_size - number of bits in one data element + */ +enum ssp_data_size { + SSP_DATA_BITS_4 = 0x03, SSP_DATA_BITS_5, SSP_DATA_BITS_6, + SSP_DATA_BITS_7, SSP_DATA_BITS_8, SSP_DATA_BITS_9, + SSP_DATA_BITS_10, SSP_DATA_BITS_11, SSP_DATA_BITS_12, + SSP_DATA_BITS_13, SSP_DATA_BITS_14, SSP_DATA_BITS_15, + SSP_DATA_BITS_16, SSP_DATA_BITS_17, SSP_DATA_BITS_18, + SSP_DATA_BITS_19, SSP_DATA_BITS_20, SSP_DATA_BITS_21, + SSP_DATA_BITS_22, SSP_DATA_BITS_23, SSP_DATA_BITS_24, + SSP_DATA_BITS_25, SSP_DATA_BITS_26, SSP_DATA_BITS_27, + SSP_DATA_BITS_28, SSP_DATA_BITS_29, SSP_DATA_BITS_30, + SSP_DATA_BITS_31, SSP_DATA_BITS_32 +}; + +/** + * enum ssp_mode - SSP mode of operation (Communication modes) + */ +enum ssp_mode { + INTERRUPT_TRANSFER, + POLLING_TRANSFER, + DMA_TRANSFER +}; + +/** + * enum ssp_rx_level_trig - receive FIFO watermark level which triggers + * IT: Interrupt fires when _N_ or more elements in RX FIFO. + */ +enum ssp_rx_level_trig { + SSP_RX_1_OR_MORE_ELEM, + SSP_RX_4_OR_MORE_ELEM, + SSP_RX_8_OR_MORE_ELEM, + SSP_RX_16_OR_MORE_ELEM, + SSP_RX_32_OR_MORE_ELEM +}; + +/** + * Transmit FIFO watermark level which triggers (IT Interrupt fires + * when _N_ or more empty locations in TX FIFO) + */ +enum ssp_tx_level_trig { + SSP_TX_1_OR_MORE_EMPTY_LOC, + SSP_TX_4_OR_MORE_EMPTY_LOC, + SSP_TX_8_OR_MORE_EMPTY_LOC, + SSP_TX_16_OR_MORE_EMPTY_LOC, + SSP_TX_32_OR_MORE_EMPTY_LOC +}; + +/** + * enum SPI Clock Phase - clock phase (Motorola SPI interface only) + * @SSP_CLK_RISING_EDGE: Receive data on rising edge + * @SSP_CLK_FALLING_EDGE: Receive data on falling edge + */ +enum ssp_spi_clk_phase { + SSP_CLK_RISING_EDGE, + SSP_CLK_FALLING_EDGE +}; + +/** + * enum SPI Clock Polarity - clock polarity (Motorola SPI interface only) + * @SSP_CLK_POL_IDLE_LOW: Low inactive level + * @SSP_CLK_POL_IDLE_HIGH: High inactive level + */ +enum ssp_spi_clk_pol { + SSP_CLK_POL_IDLE_LOW, + SSP_CLK_POL_IDLE_HIGH +}; + +/** + * Microwire Conrol Lengths Command size in microwire format + */ +enum ssp_microwire_ctrl_len { + SSP_BITS_4 = 0x03, SSP_BITS_5, SSP_BITS_6, + SSP_BITS_7, SSP_BITS_8, SSP_BITS_9, + SSP_BITS_10, SSP_BITS_11, SSP_BITS_12, + SSP_BITS_13, SSP_BITS_14, SSP_BITS_15, + SSP_BITS_16, SSP_BITS_17, SSP_BITS_18, + SSP_BITS_19, SSP_BITS_20, SSP_BITS_21, + SSP_BITS_22, SSP_BITS_23, SSP_BITS_24, + SSP_BITS_25, SSP_BITS_26, SSP_BITS_27, + SSP_BITS_28, SSP_BITS_29, SSP_BITS_30, + SSP_BITS_31, SSP_BITS_32 +}; + +/** + * enum Microwire Wait State + * @SSP_MWIRE_WAIT_ZERO: No wait state inserted after last command bit + * @SSP_MWIRE_WAIT_ONE: One wait state inserted after last command bit + */ +enum ssp_microwire_wait_state { + SSP_MWIRE_WAIT_ZERO, + SSP_MWIRE_WAIT_ONE +}; + +/** + * enum Microwire - whether Full/Half Duplex + * @SSP_MICROWIRE_CHANNEL_FULL_DUPLEX: SSPTXD becomes bi-directional, + * SSPRXD not used + * @SSP_MICROWIRE_CHANNEL_HALF_DUPLEX: SSPTXD is an output, SSPRXD is + * an input. + */ +enum ssp_duplex { + SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, + SSP_MICROWIRE_CHANNEL_HALF_DUPLEX +}; + +/** + * CHIP select/deselect commands + */ +enum ssp_chip_select { + SSP_CHIP_SELECT, + SSP_CHIP_DESELECT +}; + + +/** + * struct pl022_ssp_master - device.platform_data for SPI controller devices. + * @num_chipselect: chipselects are used to distinguish individual + * SPI slaves, and are numbered from zero to num_chipselects - 1. + * each slave has a chipselect signal, but it's common that not + * every chipselect is connected to a slave. + * @enable_dma: if true enables DMA driven transfers. + */ +struct pl022_ssp_controller { + u16 bus_id; + u8 num_chipselect; + u8 enable_dma:1; +}; + +/** + * struct ssp_config_chip - spi_board_info.controller_data for SPI + * slave devices, copied to spi_device.controller_data. + * + * @lbm: used for test purpose to internally connect RX and TX + * @iface: Interface type(Motorola, TI, Microwire, Universal) + * @hierarchy: sets whether interface is master or slave + * @slave_tx_disable: SSPTXD is disconnected (in slave mode only) + * @clk_freq: Tune freq parameters of SSP(when in master mode) + * @endian_rx: Endianess of Data in Rx FIFO + * @endian_tx: Endianess of Data in Tx FIFO + * @data_size: Width of data element(4 to 32 bits) + * @com_mode: communication mode: polling, Interrupt or DMA + * @rx_lev_trig: Rx FIFO watermark level (for IT & DMA mode) + * @tx_lev_trig: Tx FIFO watermark level (for IT & DMA mode) + * @clk_phase: Motorola SPI interface Clock phase + * @clk_pol: Motorola SPI interface Clock polarity + * @ctrl_len: Microwire interface: Control length + * @wait_state: Microwire interface: Wait state + * @duplex: Microwire interface: Full/Half duplex + * @cs_control: function pointer to board-specific function to + * assert/deassert I/O port to control HW generation of devices chip-select. + * @dma_xfer_type: Type of DMA xfer (Mem-to-periph or Periph-to-Periph) + * @dma_config: DMA configuration for SSP controller and peripheral + */ +struct pl022_config_chip { + struct device *dev; + enum ssp_loopback lbm; + enum ssp_interface iface; + enum ssp_hierarchy hierarchy; + bool slave_tx_disable; + struct ssp_clock_params clk_freq; + enum ssp_rx_endian endian_rx; + enum ssp_tx_endian endian_tx; + enum ssp_data_size data_size; + enum ssp_mode com_mode; + enum ssp_rx_level_trig rx_lev_trig; + enum ssp_tx_level_trig tx_lev_trig; + enum ssp_spi_clk_phase clk_phase; + enum ssp_spi_clk_pol clk_pol; + enum ssp_microwire_ctrl_len ctrl_len; + enum ssp_microwire_wait_state wait_state; + enum ssp_duplex duplex; + void (*cs_control) (u32 control); +}; + +#endif /* _SSP_PL022_H */ -- cgit v1.2.3 From 3f68535adad8dd89499505a65fb25d0e02d118cc Mon Sep 17 00:00:00 2001 From: john stultz Date: Wed, 21 Jan 2009 22:53:22 -0700 Subject: clocksource: sanity check sysfs clocksource changes Thomas, Andrew and Ingo pointed out that we don't have any safety checks in the clocksource sysfs entries to make sure sysadmins don't try to change the clocksource to a non high-res timer capable clocksource (such as jiffies) when high-res timers (HRT) is enabled. Doing so will likely hang a system. Correct this by filtering non HRT clocksources from available_clocksources and not accepting non HRT clocksources with HRT enabled. Signed-off-by: John Stultz Signed-off-by: Andrew Morton Signed-off-by: Thomas Gleixner --- include/linux/hrtimer.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index 0d2f7c8a33d6..58021b0c396d 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -305,7 +305,7 @@ static inline int hrtimer_is_hres_active(struct hrtimer *timer) extern ktime_t ktime_get(void); extern ktime_t ktime_get_real(void); - +extern int hrtimer_hres_active(void); DECLARE_PER_CPU(struct tick_device, tick_cpu_device); -- cgit v1.2.3 From d005ba6cc82440d9ebf96f3ec8f79c54578b898f Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 10 Jun 2009 05:28:04 +0000 Subject: mdio: Expose 10GBASE-T MDI-X status via ethtool This is available in a standard MDIO register in 10GBASE-T PHYs. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/linux/mdio.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mdio.h b/include/linux/mdio.h index 56851646529a..cfdf1df2875e 100644 --- a/include/linux/mdio.h +++ b/include/linux/mdio.h @@ -45,6 +45,7 @@ #define MDIO_PHYXS_LNSTAT 24 /* PHY XGXS lane state */ /* Media-dependent registers. */ +#define MDIO_PMA_10GBT_SWAPPOL 130 /* 10GBASE-T pair swap & polarity */ #define MDIO_PMA_10GBT_TXPWR 131 /* 10GBASE-T TX power control */ #define MDIO_PMA_10GBT_SNR 133 /* 10GBASE-T SNR margin, lane A. * Lanes B-D are numbered 134-136. */ @@ -195,6 +196,14 @@ #define MDIO_PHYXS_LNSTAT_SYNC3 0x0008 #define MDIO_PHYXS_LNSTAT_ALIGN 0x1000 +/* PMA 10GBASE-T pair swap & polarity */ +#define MDIO_PMA_10GBT_SWAPPOL_ABNX 0x0001 /* Pair A/B uncrossed */ +#define MDIO_PMA_10GBT_SWAPPOL_CDNX 0x0002 /* Pair C/D uncrossed */ +#define MDIO_PMA_10GBT_SWAPPOL_AREV 0x0100 /* Pair A polarity reversed */ +#define MDIO_PMA_10GBT_SWAPPOL_BREV 0x0200 /* Pair B polarity reversed */ +#define MDIO_PMA_10GBT_SWAPPOL_CREV 0x0400 /* Pair C polarity reversed */ +#define MDIO_PMA_10GBT_SWAPPOL_DREV 0x0800 /* Pair D polarity reversed */ + /* PMA 10GBASE-T TX power register. */ #define MDIO_PMA_10GBT_TXPWR_SHORT 0x0001 /* Short-reach mode */ -- cgit v1.2.3 From 8593a1967fb9746d318dde88a0a39a36dbfc3445 Mon Sep 17 00:00:00 2001 From: Inaky Perez-Gonzalez Date: Wed, 20 May 2009 16:53:30 -0700 Subject: wimax/i2400m: rename misleading I2400M_PL_PAD to I2400M_PL_ALIGN The constant is being use as an alignment factor, not as a padding factor; made reading/reviewing the code quite confusing. Signed-off-by: Inaky Perez-Gonzalez --- include/linux/wimax/i2400m.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/wimax/i2400m.h b/include/linux/wimax/i2400m.h index d5148a7889a6..433693ef2bb0 100644 --- a/include/linux/wimax/i2400m.h +++ b/include/linux/wimax/i2400m.h @@ -266,7 +266,7 @@ enum i2400m_ro_type { /* Misc constants */ enum { - I2400M_PL_PAD = 16, /* Payload data size alignment */ + I2400M_PL_ALIGN = 16, /* Payload data size alignment */ I2400M_PL_SIZE_MAX = 0x3EFF, I2400M_MAX_PLS_IN_MSG = 60, /* protocol barkers: sync sequences; for notifications they -- cgit v1.2.3 From 670025478c2a687453cd1bac697d7d765843f59d Mon Sep 17 00:00:00 2001 From: Karsten Keil Date: Thu, 11 Jun 2009 15:52:10 +0200 Subject: mISDN: cleanup mISDNhw.h Remove unused stuff. Signed-off-by: Karsten Keil --- include/linux/mISDNhw.h | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mISDNhw.h b/include/linux/mISDNhw.h index ce900f4c2458..7f9831da847f 100644 --- a/include/linux/mISDNhw.h +++ b/include/linux/mISDNhw.h @@ -89,11 +89,6 @@ struct dchannel { void (*phfunc) (struct dchannel *); u_int state; void *l1; - /* HW access */ - u_char (*read_reg) (void *, u_char); - void (*write_reg) (void *, u_char, u_char); - void (*read_fifo) (void *, u_char *, int); - void (*write_fifo) (void *, u_char *, int); void *hw; int slot; /* multiport card channel slot */ struct timer_list timer; @@ -151,11 +146,6 @@ struct bchannel { u_long Flags; struct work_struct workq; u_int state; - /* HW access */ - u_char (*read_reg) (void *, u_char); - void (*write_reg) (void *, u_char, u_char); - void (*read_fifo) (void *, u_char *, int); - void (*write_fifo) (void *, u_char *, int); void *hw; int slot; /* multiport card channel slot */ struct timer_list timer; -- cgit v1.2.3 From 90586523eb4b349806887c62ee70685a49415124 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Thu, 21 May 2009 17:01:20 -0400 Subject: fsnotify: unified filesystem notification backend fsnotify is a backend for filesystem notification. fsnotify does not provide any userspace interface but does provide the basis needed for other notification schemes such as dnotify. fsnotify can be extended to be the backend for inotify or the upcoming fanotify. fsnotify provides a mechanism for "groups" to register for some set of filesystem events and to then deliver those events to those groups for processing. fsnotify has a number of benefits, the first being actually shrinking the size of an inode. Before fsnotify to support both dnotify and inotify an inode had unsigned long i_dnotify_mask; /* Directory notify events */ struct dnotify_struct *i_dnotify; /* for directory notifications */ struct list_head inotify_watches; /* watches on this inode */ struct mutex inotify_mutex; /* protects the watches list But with fsnotify this same functionallity (and more) is done with just __u32 i_fsnotify_mask; /* all events for this inode */ struct hlist_head i_fsnotify_mark_entries; /* marks on this inode */ That's right, inotify, dnotify, and fanotify all in 64 bits. We used that much space just in inotify_watches alone, before this patch set. fsnotify object lifetime and locking is MUCH better than what we have today. inotify locking is incredibly complex. See 8f7b0ba1c8539 as an example of what's been busted since inception. inotify needs to know internal semantics of superblock destruction and unmounting to function. The inode pinning and vfs contortions are horrible. no fsnotify implementers do allocation under locks. This means things like f04b30de3 which (due to an overabundance of caution) changes GFP_KERNEL to GFP_NOFS can be reverted. There are no longer any allocation rules when using or implementing your own fsnotify listener. fsnotify paves the way for fanotify. In brief fanotify is a notification mechanism that delivers the lisener both an 'event' and an open file descriptor to the object in question. This means that fanotify is pathname agnostic. Some on lkml may not care for the original companies or users that pushed for TALPA, but fanotify was designed with flexibility and input for other users in mind. The readahead group expressed interest in fanotify as it could be used to profile disk access on boot without breaking the audit system. The desktop search groups have also expressed interest in fanotify as it solves a number of the race conditions and problems present with managing inotify when more than a limited number of specific files are of interest. fanotify can provide for a userspace access control system which makes it a clean interface for AV vendors to hook without trying to do binary patching on the syscall table, LSM, and everywhere else they do their things today. With this patch series fanotify can be implemented in less than 1200 lines of easy to review code. Almost all of which is the socket based user interface. This patch series builds fsnotify to the point that it can implement dnotify and inotify_user. Patches exist and will be sent soon after acceptance to finish the in kernel inotify conversion (audit) and implement fanotify. Signed-off-by: Eric Paris Acked-by: Al Viro Cc: Christoph Hellwig --- include/linux/fsnotify.h | 115 +++++++++++++++++-------- include/linux/fsnotify_backend.h | 177 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 257 insertions(+), 35 deletions(-) create mode 100644 include/linux/fsnotify_backend.h (limited to 'include/linux') diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h index 00fbd5b245c9..6c9ebefdac8e 100644 --- a/include/linux/fsnotify.h +++ b/include/linux/fsnotify.h @@ -13,6 +13,7 @@ #include #include +#include #include /* @@ -34,6 +35,16 @@ static inline void fsnotify_d_move(struct dentry *entry) inotify_d_move(entry); } +/* + * fsnotify_link_count - inode's link count changed + */ +static inline void fsnotify_link_count(struct inode *inode) +{ + inotify_inode_queue_event(inode, IN_ATTRIB, 0, NULL, NULL); + + fsnotify(inode, FS_ATTRIB, inode, FSNOTIFY_EVENT_INODE); +} + /* * fsnotify_move - file old_name at old_dir was moved to new_name at new_dir */ @@ -43,28 +54,47 @@ static inline void fsnotify_move(struct inode *old_dir, struct inode *new_dir, { struct inode *source = moved->d_inode; u32 cookie = inotify_get_cookie(); + __u32 old_dir_mask = 0; + __u32 new_dir_mask = 0; - if (old_dir == new_dir) + if (old_dir == new_dir) { inode_dir_notify(old_dir, DN_RENAME); - else { + old_dir_mask = FS_DN_RENAME; + } else { inode_dir_notify(old_dir, DN_DELETE); + old_dir_mask = FS_DELETE; inode_dir_notify(new_dir, DN_CREATE); + new_dir_mask = FS_CREATE; } - if (isdir) + if (isdir) { isdir = IN_ISDIR; + old_dir_mask |= FS_IN_ISDIR; + new_dir_mask |= FS_IN_ISDIR; + } + + old_dir_mask |= FS_MOVED_FROM; + new_dir_mask |= FS_MOVED_TO; + inotify_inode_queue_event(old_dir, IN_MOVED_FROM|isdir,cookie,old_name, source); inotify_inode_queue_event(new_dir, IN_MOVED_TO|isdir, cookie, new_name, source); + fsnotify(old_dir, old_dir_mask, old_dir, FSNOTIFY_EVENT_INODE); + fsnotify(new_dir, new_dir_mask, new_dir, FSNOTIFY_EVENT_INODE); + if (target) { inotify_inode_queue_event(target, IN_DELETE_SELF, 0, NULL, NULL); inotify_inode_is_dead(target); + + /* this is really a link_count change not a removal */ + fsnotify_link_count(target); } if (source) { inotify_inode_queue_event(source, IN_MOVE_SELF, 0, NULL, NULL); + fsnotify(source, FS_MOVE_SELF, moved->d_inode, FSNOTIFY_EVENT_INODE); } audit_inode_child(new_name, moved, new_dir); } @@ -74,10 +104,12 @@ static inline void fsnotify_move(struct inode *old_dir, struct inode *new_dir, */ static inline void fsnotify_nameremove(struct dentry *dentry, int isdir) { + __u32 mask = FS_DELETE; + if (isdir) - isdir = IN_ISDIR; + mask |= FS_IN_ISDIR; dnotify_parent(dentry, DN_DELETE); - inotify_dentry_parent_queue_event(dentry, IN_DELETE|isdir, 0, dentry->d_name.name); + inotify_dentry_parent_queue_event(dentry, mask, 0, dentry->d_name.name); } /* @@ -87,14 +119,8 @@ static inline void fsnotify_inoderemove(struct inode *inode) { inotify_inode_queue_event(inode, IN_DELETE_SELF, 0, NULL, NULL); inotify_inode_is_dead(inode); -} -/* - * fsnotify_link_count - inode's link count changed - */ -static inline void fsnotify_link_count(struct inode *inode) -{ - inotify_inode_queue_event(inode, IN_ATTRIB, 0, NULL, NULL); + fsnotify(inode, FS_DELETE_SELF, inode, FSNOTIFY_EVENT_INODE); } /* @@ -106,6 +132,8 @@ static inline void fsnotify_create(struct inode *inode, struct dentry *dentry) inotify_inode_queue_event(inode, IN_CREATE, 0, dentry->d_name.name, dentry->d_inode); audit_inode_child(dentry->d_name.name, dentry, inode); + + fsnotify(inode, FS_CREATE, dentry->d_inode, FSNOTIFY_EVENT_INODE); } /* @@ -120,6 +148,8 @@ static inline void fsnotify_link(struct inode *dir, struct inode *inode, struct inode); fsnotify_link_count(inode); audit_inode_child(new_dentry->d_name.name, new_dentry, dir); + + fsnotify(dir, FS_CREATE, inode, FSNOTIFY_EVENT_INODE); } /* @@ -127,10 +157,14 @@ static inline void fsnotify_link(struct inode *dir, struct inode *inode, struct */ static inline void fsnotify_mkdir(struct inode *inode, struct dentry *dentry) { + __u32 mask = (FS_CREATE | FS_IN_ISDIR); + struct inode *d_inode = dentry->d_inode; + inode_dir_notify(inode, DN_CREATE); - inotify_inode_queue_event(inode, IN_CREATE | IN_ISDIR, 0, - dentry->d_name.name, dentry->d_inode); + inotify_inode_queue_event(inode, mask, 0, dentry->d_name.name, d_inode); audit_inode_child(dentry->d_name.name, dentry, inode); + + fsnotify(inode, mask, d_inode, FSNOTIFY_EVENT_INODE); } /* @@ -139,14 +173,16 @@ static inline void fsnotify_mkdir(struct inode *inode, struct dentry *dentry) static inline void fsnotify_access(struct dentry *dentry) { struct inode *inode = dentry->d_inode; - u32 mask = IN_ACCESS; + __u32 mask = FS_ACCESS; if (S_ISDIR(inode->i_mode)) - mask |= IN_ISDIR; + mask |= FS_IN_ISDIR; dnotify_parent(dentry, DN_ACCESS); inotify_dentry_parent_queue_event(dentry, mask, 0, dentry->d_name.name); inotify_inode_queue_event(inode, mask, 0, NULL, NULL); + + fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE); } /* @@ -155,14 +191,16 @@ static inline void fsnotify_access(struct dentry *dentry) static inline void fsnotify_modify(struct dentry *dentry) { struct inode *inode = dentry->d_inode; - u32 mask = IN_MODIFY; + __u32 mask = FS_MODIFY; if (S_ISDIR(inode->i_mode)) - mask |= IN_ISDIR; + mask |= FS_IN_ISDIR; dnotify_parent(dentry, DN_MODIFY); inotify_dentry_parent_queue_event(dentry, mask, 0, dentry->d_name.name); inotify_inode_queue_event(inode, mask, 0, NULL, NULL); + + fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE); } /* @@ -171,13 +209,15 @@ static inline void fsnotify_modify(struct dentry *dentry) static inline void fsnotify_open(struct dentry *dentry) { struct inode *inode = dentry->d_inode; - u32 mask = IN_OPEN; + __u32 mask = FS_OPEN; if (S_ISDIR(inode->i_mode)) - mask |= IN_ISDIR; + mask |= FS_IN_ISDIR; inotify_dentry_parent_queue_event(dentry, mask, 0, dentry->d_name.name); inotify_inode_queue_event(inode, mask, 0, NULL, NULL); + + fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE); } /* @@ -189,13 +229,15 @@ static inline void fsnotify_close(struct file *file) struct inode *inode = dentry->d_inode; const char *name = dentry->d_name.name; fmode_t mode = file->f_mode; - u32 mask = (mode & FMODE_WRITE) ? IN_CLOSE_WRITE : IN_CLOSE_NOWRITE; + __u32 mask = (mode & FMODE_WRITE) ? FS_CLOSE_WRITE : FS_CLOSE_NOWRITE; if (S_ISDIR(inode->i_mode)) - mask |= IN_ISDIR; + mask |= FS_IN_ISDIR; inotify_dentry_parent_queue_event(dentry, mask, 0, name); inotify_inode_queue_event(inode, mask, 0, NULL, NULL); + + fsnotify(inode, mask, file, FSNOTIFY_EVENT_FILE); } /* @@ -204,13 +246,15 @@ static inline void fsnotify_close(struct file *file) static inline void fsnotify_xattr(struct dentry *dentry) { struct inode *inode = dentry->d_inode; - u32 mask = IN_ATTRIB; + __u32 mask = FS_ATTRIB; if (S_ISDIR(inode->i_mode)) - mask |= IN_ISDIR; + mask |= FS_IN_ISDIR; inotify_dentry_parent_queue_event(dentry, mask, 0, dentry->d_name.name); inotify_inode_queue_event(inode, mask, 0, NULL, NULL); + + fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE); } /* @@ -221,34 +265,34 @@ static inline void fsnotify_change(struct dentry *dentry, unsigned int ia_valid) { struct inode *inode = dentry->d_inode; int dn_mask = 0; - u32 in_mask = 0; + __u32 in_mask = 0; if (ia_valid & ATTR_UID) { - in_mask |= IN_ATTRIB; + in_mask |= FS_ATTRIB; dn_mask |= DN_ATTRIB; } if (ia_valid & ATTR_GID) { - in_mask |= IN_ATTRIB; + in_mask |= FS_ATTRIB; dn_mask |= DN_ATTRIB; } if (ia_valid & ATTR_SIZE) { - in_mask |= IN_MODIFY; + in_mask |= FS_MODIFY; dn_mask |= DN_MODIFY; } /* both times implies a utime(s) call */ if ((ia_valid & (ATTR_ATIME | ATTR_MTIME)) == (ATTR_ATIME | ATTR_MTIME)) { - in_mask |= IN_ATTRIB; + in_mask |= FS_ATTRIB; dn_mask |= DN_ATTRIB; } else if (ia_valid & ATTR_ATIME) { - in_mask |= IN_ACCESS; + in_mask |= FS_ACCESS; dn_mask |= DN_ACCESS; } else if (ia_valid & ATTR_MTIME) { - in_mask |= IN_MODIFY; + in_mask |= FS_MODIFY; dn_mask |= DN_MODIFY; } if (ia_valid & ATTR_MODE) { - in_mask |= IN_ATTRIB; + in_mask |= FS_ATTRIB; dn_mask |= DN_ATTRIB; } @@ -256,14 +300,15 @@ static inline void fsnotify_change(struct dentry *dentry, unsigned int ia_valid) dnotify_parent(dentry, dn_mask); if (in_mask) { if (S_ISDIR(inode->i_mode)) - in_mask |= IN_ISDIR; + in_mask |= FS_IN_ISDIR; inotify_inode_queue_event(inode, in_mask, 0, NULL, NULL); inotify_dentry_parent_queue_event(dentry, in_mask, 0, dentry->d_name.name); + fsnotify(inode, in_mask, inode, FSNOTIFY_EVENT_INODE); } } -#ifdef CONFIG_INOTIFY /* inotify helpers */ +#if defined(CONFIG_INOTIFY) || defined(CONFIG_FSNOTIFY) /* notify helpers */ /* * fsnotify_oldname_init - save off the old filename before we change it @@ -281,7 +326,7 @@ static inline void fsnotify_oldname_free(const char *old_name) kfree(old_name); } -#else /* CONFIG_INOTIFY */ +#else /* CONFIG_INOTIFY || CONFIG_FSNOTIFY */ static inline const char *fsnotify_oldname_init(const char *name) { diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h new file mode 100644 index 000000000000..1a55718b38aa --- /dev/null +++ b/include/linux/fsnotify_backend.h @@ -0,0 +1,177 @@ +/* + * Filesystem access notification for Linux + * + * Copyright (C) 2008 Red Hat, Inc., Eric Paris + */ + +#ifndef __LINUX_FSNOTIFY_BACKEND_H +#define __LINUX_FSNOTIFY_BACKEND_H + +#ifdef __KERNEL__ + +#include /* struct inode */ +#include +#include /* struct path */ +#include +#include + +#include + +/* + * IN_* from inotfy.h lines up EXACTLY with FS_*, this is so we can easily + * convert between them. dnotify only needs conversion at watch creation + * so no perf loss there. fanotify isn't defined yet, so it can use the + * wholes if it needs more events. + */ +#define FS_ACCESS 0x00000001 /* File was accessed */ +#define FS_MODIFY 0x00000002 /* File was modified */ +#define FS_ATTRIB 0x00000004 /* Metadata changed */ +#define FS_CLOSE_WRITE 0x00000008 /* Writtable file was closed */ +#define FS_CLOSE_NOWRITE 0x00000010 /* Unwrittable file closed */ +#define FS_OPEN 0x00000020 /* File was opened */ +#define FS_MOVED_FROM 0x00000040 /* File was moved from X */ +#define FS_MOVED_TO 0x00000080 /* File was moved to Y */ +#define FS_CREATE 0x00000100 /* Subfile was created */ +#define FS_DELETE 0x00000200 /* Subfile was deleted */ +#define FS_DELETE_SELF 0x00000400 /* Self was deleted */ +#define FS_MOVE_SELF 0x00000800 /* Self was moved */ + +#define FS_UNMOUNT 0x00002000 /* inode on umount fs */ +#define FS_Q_OVERFLOW 0x00004000 /* Event queued overflowed */ +#define FS_IN_IGNORED 0x00008000 /* last inotify event here */ + +#define FS_IN_ISDIR 0x40000000 /* event occurred against dir */ +#define FS_IN_ONESHOT 0x80000000 /* only send event once */ + +#define FS_DN_RENAME 0x10000000 /* file renamed */ +#define FS_DN_MULTISHOT 0x20000000 /* dnotify multishot */ + +struct fsnotify_group; +struct fsnotify_event; + +/* + * Each group much define these ops. The fsnotify infrastructure will call + * these operations for each relevant group. + * + * handle_event - main call for a group to handle an fs event + * free_group_priv - called when a group refcnt hits 0 to clean up the private union + */ +struct fsnotify_ops { + int (*handle_event)(struct fsnotify_group *group, struct fsnotify_event *event); + void (*free_group_priv)(struct fsnotify_group *group); +}; + +/* + * A group is a "thing" that wants to receive notification about filesystem + * events. The mask holds the subset of event types this group cares about. + * refcnt on a group is up to the implementor and at any moment if it goes 0 + * everything will be cleaned up. + */ +struct fsnotify_group { + /* + * global list of all groups receiving events from fsnotify. + * anchored by fsnotify_groups and protected by either fsnotify_grp_mutex + * or fsnotify_grp_srcu depending on write vs read. + */ + struct list_head group_list; + + /* + * Defines all of the event types in which this group is interested. + * This mask is a bitwise OR of the FS_* events from above. Each time + * this mask changes for a group (if it changes) the correct functions + * must be called to update the global structures which indicate global + * interest in event types. + */ + __u32 mask; + + /* + * How the refcnt is used is up to each group. When the refcnt hits 0 + * fsnotify will clean up all of the resources associated with this group. + * As an example, the dnotify group will always have a refcnt=1 and that + * will never change. Inotify, on the other hand, has a group per + * inotify_init() and the refcnt will hit 0 only when that fd has been + * closed. + */ + atomic_t refcnt; /* things with interest in this group */ + unsigned int group_num; /* simply prevents accidental group collision */ + + const struct fsnotify_ops *ops; /* how this group handles things */ + + /* prevents double list_del of group_list. protected by global fsnotify_gr_mutex */ + bool on_group_list; + + /* groups can define private fields here or use the void *private */ + union { + void *private; + }; +}; + +/* + * all of the information about the original object we want to now send to + * a group. If you want to carry more info from the accessing task to the + * listener this structure is where you need to be adding fields. + */ +struct fsnotify_event { + spinlock_t lock; /* protection for the associated event_holder and private_list */ + /* to_tell may ONLY be dereferenced during handle_event(). */ + struct inode *to_tell; /* either the inode the event happened to or its parent */ + /* + * depending on the event type we should have either a path or inode + * We hold a reference on path, but NOT on inode. Since we have the ref on + * the path, it may be dereferenced at any point during this object's + * lifetime. That reference is dropped when this object's refcnt hits + * 0. If this event contains an inode instead of a path, the inode may + * ONLY be used during handle_event(). + */ + union { + struct path path; + struct inode *inode; + }; +/* when calling fsnotify tell it if the data is a path or inode */ +#define FSNOTIFY_EVENT_NONE 0 +#define FSNOTIFY_EVENT_PATH 1 +#define FSNOTIFY_EVENT_INODE 2 +#define FSNOTIFY_EVENT_FILE 3 + int data_type; /* which of the above union we have */ + atomic_t refcnt; /* how many groups still are using/need to send this event */ + __u32 mask; /* the type of access, bitwise OR for FS_* event types */ +}; + +#ifdef CONFIG_FSNOTIFY + +/* called from the vfs helpers */ + +/* main fsnotify call to send events */ +extern void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is); + + +/* called from fsnotify listeners, such as fanotify or dnotify */ + +/* must call when a group changes its ->mask */ +extern void fsnotify_recalc_global_mask(void); +/* get a reference to an existing or create a new group */ +extern struct fsnotify_group *fsnotify_obtain_group(unsigned int group_num, + __u32 mask, + const struct fsnotify_ops *ops); +/* drop reference on a group from fsnotify_obtain_group */ +extern void fsnotify_put_group(struct fsnotify_group *group); + +/* take a reference to an event */ +extern void fsnotify_get_event(struct fsnotify_event *event); +extern void fsnotify_put_event(struct fsnotify_event *event); +/* find private data previously attached to an event */ +extern struct fsnotify_event_private_data *fsnotify_get_priv_from_event(struct fsnotify_group *group, + struct fsnotify_event *event); + +/* put here because inotify does some weird stuff when destroying watches */ +extern struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask, + void *data, int data_is); +#else + +static inline void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is) +{} +#endif /* CONFIG_FSNOTIFY */ + +#endif /* __KERNEL __ */ + +#endif /* __LINUX_FSNOTIFY_BACKEND_H */ -- cgit v1.2.3 From 3be25f49b9d6a97eae9bcb96d3292072b7658bd8 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Thu, 21 May 2009 17:01:26 -0400 Subject: fsnotify: add marks to inodes so groups can interpret how to handle those inodes This patch creates a way for fsnotify groups to attach marks to inodes. These marks have little meaning to the generic fsnotify infrastructure and thus their meaning should be interpreted by the group that attached them to the inode's list. dnotify and inotify will make use of these markings to indicate which inodes are of interest to their respective groups. But this implementation has the useful property that in the future other listeners could actually use the marks for the exact opposite reason, aka to indicate which inodes it had NO interest in. Signed-off-by: Eric Paris Acked-by: Al Viro Cc: Christoph Hellwig --- include/linux/fs.h | 5 ++++ include/linux/fsnotify.h | 9 ++++++ include/linux/fsnotify_backend.h | 65 +++++++++++++++++++++++++++++++++++++++- 3 files changed, 78 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 83d6b4397245..275b0860044c 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -755,6 +755,11 @@ struct inode { __u32 i_generation; +#ifdef CONFIG_FSNOTIFY + __u32 i_fsnotify_mask; /* all events this inode cares about */ + struct hlist_head i_fsnotify_mark_entries; /* fsnotify mark entries */ +#endif + #ifdef CONFIG_DNOTIFY unsigned long i_dnotify_mask; /* Directory notify events */ struct dnotify_struct *i_dnotify; /* for directory notifications */ diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h index 6c9ebefdac8e..3856eb6e5973 100644 --- a/include/linux/fsnotify.h +++ b/include/linux/fsnotify.h @@ -99,6 +99,14 @@ static inline void fsnotify_move(struct inode *old_dir, struct inode *new_dir, audit_inode_child(new_name, moved, new_dir); } +/* + * fsnotify_inode_delete - and inode is being evicted from cache, clean up is needed + */ +static inline void fsnotify_inode_delete(struct inode *inode) +{ + __fsnotify_inode_delete(inode); +} + /* * fsnotify_nameremove - a filename was removed from a directory */ @@ -121,6 +129,7 @@ static inline void fsnotify_inoderemove(struct inode *inode) inotify_inode_is_dead(inode); fsnotify(inode, FS_DELETE_SELF, inode, FSNOTIFY_EVENT_INODE); + __fsnotify_inode_delete(inode); } /* diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h index 1a55718b38aa..cad5c4d75c1d 100644 --- a/include/linux/fsnotify_backend.h +++ b/include/linux/fsnotify_backend.h @@ -48,17 +48,25 @@ struct fsnotify_group; struct fsnotify_event; +struct fsnotify_mark_entry; /* * Each group much define these ops. The fsnotify infrastructure will call * these operations for each relevant group. * + * should_send_event - given a group, inode, and mask this function determines + * if the group is interested in this event. * handle_event - main call for a group to handle an fs event * free_group_priv - called when a group refcnt hits 0 to clean up the private union + * freeing-mark - this means that a mark has been flagged to die when everything + * finishes using it. The function is supplied with what must be a + * valid group and inode to use to clean up. */ struct fsnotify_ops { + bool (*should_send_event)(struct fsnotify_group *group, struct inode *inode, __u32 mask); int (*handle_event)(struct fsnotify_group *group, struct fsnotify_event *event); void (*free_group_priv)(struct fsnotify_group *group); + void (*freeing_mark)(struct fsnotify_mark_entry *entry, struct fsnotify_group *group); }; /* @@ -97,7 +105,14 @@ struct fsnotify_group { const struct fsnotify_ops *ops; /* how this group handles things */ - /* prevents double list_del of group_list. protected by global fsnotify_gr_mutex */ + /* stores all fastapth entries assoc with this group so they can be cleaned on unregister */ + spinlock_t mark_lock; /* protect mark_entries list */ + atomic_t num_marks; /* 1 for each mark entry and 1 for not being + * past the point of no return when freeing + * a group */ + struct list_head mark_entries; /* all inode mark entries for this group */ + + /* prevents double list_del of group_list. protected by global fsnotify_grp_mutex */ bool on_group_list; /* groups can define private fields here or use the void *private */ @@ -137,12 +152,38 @@ struct fsnotify_event { __u32 mask; /* the type of access, bitwise OR for FS_* event types */ }; +/* + * a mark is simply an entry attached to an in core inode which allows an + * fsnotify listener to indicate they are either no longer interested in events + * of a type matching mask or only interested in those events. + * + * these are flushed when an inode is evicted from core and may be flushed + * when the inode is modified (as seen by fsnotify_access). Some fsnotify users + * (such as dnotify) will flush these when the open fd is closed and not at + * inode eviction or modification. + */ +struct fsnotify_mark_entry { + __u32 mask; /* mask this mark entry is for */ + /* we hold ref for each i_list and g_list. also one ref for each 'thing' + * in kernel that found and may be using this mark. */ + atomic_t refcnt; /* active things looking at this mark */ + struct inode *inode; /* inode this entry is associated with */ + struct fsnotify_group *group; /* group this mark entry is for */ + struct hlist_node i_list; /* list of mark_entries by inode->i_fsnotify_mark_entries */ + struct list_head g_list; /* list of mark_entries by group->i_fsnotify_mark_entries */ + spinlock_t lock; /* protect group, inode, and killme */ + struct list_head free_i_list; /* tmp list used when freeing this mark */ + struct list_head free_g_list; /* tmp list used when freeing this mark */ + void (*free_mark)(struct fsnotify_mark_entry *entry); /* called on final put+free */ +}; + #ifdef CONFIG_FSNOTIFY /* called from the vfs helpers */ /* main fsnotify call to send events */ extern void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is); +extern void __fsnotify_inode_delete(struct inode *inode); /* called from fsnotify listeners, such as fanotify or dnotify */ @@ -153,6 +194,8 @@ extern void fsnotify_recalc_global_mask(void); extern struct fsnotify_group *fsnotify_obtain_group(unsigned int group_num, __u32 mask, const struct fsnotify_ops *ops); +/* run all marks associated with this group and update group->mask */ +extern void fsnotify_recalc_group_mask(struct fsnotify_group *group); /* drop reference on a group from fsnotify_obtain_group */ extern void fsnotify_put_group(struct fsnotify_group *group); @@ -163,6 +206,22 @@ extern void fsnotify_put_event(struct fsnotify_event *event); extern struct fsnotify_event_private_data *fsnotify_get_priv_from_event(struct fsnotify_group *group, struct fsnotify_event *event); +/* functions used to manipulate the marks attached to inodes */ + +/* run all marks associated with an inode and update inode->i_fsnotify_mask */ +extern void fsnotify_recalc_inode_mask(struct inode *inode); +extern void fsnotify_init_mark(struct fsnotify_mark_entry *entry, void (*free_mark)(struct fsnotify_mark_entry *entry)); +/* find (and take a reference) to a mark associated with group and inode */ +extern struct fsnotify_mark_entry *fsnotify_find_mark_entry(struct fsnotify_group *group, struct inode *inode); +/* attach the mark to both the group and the inode */ +extern int fsnotify_add_mark(struct fsnotify_mark_entry *entry, struct fsnotify_group *group, struct inode *inode); +/* given a mark, flag it to be freed when all references are dropped */ +extern void fsnotify_destroy_mark_by_entry(struct fsnotify_mark_entry *entry); +/* run all the marks in a group, and flag them to be freed */ +extern void fsnotify_clear_marks_by_group(struct fsnotify_group *group); +extern void fsnotify_get_mark(struct fsnotify_mark_entry *entry); +extern void fsnotify_put_mark(struct fsnotify_mark_entry *entry); + /* put here because inotify does some weird stuff when destroying watches */ extern struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask, void *data, int data_is); @@ -170,6 +229,10 @@ extern struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 static inline void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is) {} + +static inline void __fsnotify_inode_delete(struct inode *inode) +{} + #endif /* CONFIG_FSNOTIFY */ #endif /* __KERNEL __ */ -- cgit v1.2.3 From c28f7e56e9d95fb531dc3be8df2e7f52bee76d21 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Thu, 21 May 2009 17:01:29 -0400 Subject: fsnotify: parent event notification inotify and dnotify both use a similar parent notification mechanism. We add a generic parent notification mechanism to fsnotify for both of these to use. This new machanism also adds the dentry flag optimization which exists for inotify to dnotify. Signed-off-by: Eric Paris Acked-by: Al Viro Cc: Christoph Hellwig --- include/linux/dcache.h | 4 ++- include/linux/fsnotify.h | 34 +++++++++++++++------ include/linux/fsnotify_backend.h | 64 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 92 insertions(+), 10 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dcache.h b/include/linux/dcache.h index 15156364d196..97978004338d 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -180,10 +180,12 @@ d_iput: no no no yes #define DCACHE_REFERENCED 0x0008 /* Recently used, don't discard. */ #define DCACHE_UNHASHED 0x0010 -#define DCACHE_INOTIFY_PARENT_WATCHED 0x0020 /* Parent inode is watched */ +#define DCACHE_INOTIFY_PARENT_WATCHED 0x0020 /* Parent inode is watched by inotify */ #define DCACHE_COOKIE 0x0040 /* For use by dcookie subsystem */ +#define DCACHE_FSNOTIFY_PARENT_WATCHED 0x0080 /* Parent inode is watched by some fsnotify listener */ + extern spinlock_t dcache_lock; extern seqlock_t rename_lock; diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h index 3856eb6e5973..6a662ed0bc8a 100644 --- a/include/linux/fsnotify.h +++ b/include/linux/fsnotify.h @@ -23,15 +23,31 @@ static inline void fsnotify_d_instantiate(struct dentry *entry, struct inode *inode) { + __fsnotify_d_instantiate(entry, inode); + inotify_d_instantiate(entry, inode); } +/* Notify this dentry's parent about a child's events. */ +static inline void fsnotify_parent(struct dentry *dentry, __u32 mask) +{ + __fsnotify_parent(dentry, mask); + + inotify_dentry_parent_queue_event(dentry, mask, 0, dentry->d_name.name); +} + /* * fsnotify_d_move - entry has been moved * Called with dcache_lock and entry->d_lock held. */ static inline void fsnotify_d_move(struct dentry *entry) { + /* + * On move we need to update entry->d_flags to indicate if the new parent + * cares about events from this entry. + */ + __fsnotify_update_dcache_flags(entry); + inotify_d_move(entry); } @@ -117,7 +133,8 @@ static inline void fsnotify_nameremove(struct dentry *dentry, int isdir) if (isdir) mask |= FS_IN_ISDIR; dnotify_parent(dentry, DN_DELETE); - inotify_dentry_parent_queue_event(dentry, mask, 0, dentry->d_name.name); + + fsnotify_parent(dentry, mask); } /* @@ -188,9 +205,9 @@ static inline void fsnotify_access(struct dentry *dentry) mask |= FS_IN_ISDIR; dnotify_parent(dentry, DN_ACCESS); - inotify_dentry_parent_queue_event(dentry, mask, 0, dentry->d_name.name); inotify_inode_queue_event(inode, mask, 0, NULL, NULL); + fsnotify_parent(dentry, mask); fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE); } @@ -206,9 +223,9 @@ static inline void fsnotify_modify(struct dentry *dentry) mask |= FS_IN_ISDIR; dnotify_parent(dentry, DN_MODIFY); - inotify_dentry_parent_queue_event(dentry, mask, 0, dentry->d_name.name); inotify_inode_queue_event(inode, mask, 0, NULL, NULL); + fsnotify_parent(dentry, mask); fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE); } @@ -223,9 +240,9 @@ static inline void fsnotify_open(struct dentry *dentry) if (S_ISDIR(inode->i_mode)) mask |= FS_IN_ISDIR; - inotify_dentry_parent_queue_event(dentry, mask, 0, dentry->d_name.name); inotify_inode_queue_event(inode, mask, 0, NULL, NULL); + fsnotify_parent(dentry, mask); fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE); } @@ -236,16 +253,15 @@ static inline void fsnotify_close(struct file *file) { struct dentry *dentry = file->f_path.dentry; struct inode *inode = dentry->d_inode; - const char *name = dentry->d_name.name; fmode_t mode = file->f_mode; __u32 mask = (mode & FMODE_WRITE) ? FS_CLOSE_WRITE : FS_CLOSE_NOWRITE; if (S_ISDIR(inode->i_mode)) mask |= FS_IN_ISDIR; - inotify_dentry_parent_queue_event(dentry, mask, 0, name); inotify_inode_queue_event(inode, mask, 0, NULL, NULL); + fsnotify_parent(dentry, mask); fsnotify(inode, mask, file, FSNOTIFY_EVENT_FILE); } @@ -260,9 +276,9 @@ static inline void fsnotify_xattr(struct dentry *dentry) if (S_ISDIR(inode->i_mode)) mask |= FS_IN_ISDIR; - inotify_dentry_parent_queue_event(dentry, mask, 0, dentry->d_name.name); inotify_inode_queue_event(inode, mask, 0, NULL, NULL); + fsnotify_parent(dentry, mask); fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE); } @@ -311,8 +327,8 @@ static inline void fsnotify_change(struct dentry *dentry, unsigned int ia_valid) if (S_ISDIR(inode->i_mode)) in_mask |= FS_IN_ISDIR; inotify_inode_queue_event(inode, in_mask, 0, NULL, NULL); - inotify_dentry_parent_queue_event(dentry, in_mask, 0, - dentry->d_name.name); + + fsnotify_parent(dentry, in_mask); fsnotify(inode, in_mask, inode, FSNOTIFY_EVENT_INODE); } } diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h index cad5c4d75c1d..13d2dd570049 100644 --- a/include/linux/fsnotify_backend.h +++ b/include/linux/fsnotify_backend.h @@ -46,6 +46,17 @@ #define FS_DN_RENAME 0x10000000 /* file renamed */ #define FS_DN_MULTISHOT 0x20000000 /* dnotify multishot */ +/* This inode cares about things that happen to its children. Always set for + * dnotify and inotify. */ +#define FS_EVENT_ON_CHILD 0x08000000 + +/* This is a list of all events that may get sent to a parernt based on fs event + * happening to inodes inside that directory */ +#define FS_EVENTS_POSS_ON_CHILD (FS_ACCESS | FS_MODIFY | FS_ATTRIB |\ + FS_CLOSE_WRITE | FS_CLOSE_NOWRITE | FS_OPEN |\ + FS_MOVED_FROM | FS_MOVED_TO | FS_CREATE |\ + FS_DELETE) + struct fsnotify_group; struct fsnotify_event; struct fsnotify_mark_entry; @@ -183,8 +194,52 @@ struct fsnotify_mark_entry { /* main fsnotify call to send events */ extern void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is); +extern void __fsnotify_parent(struct dentry *dentry, __u32 mask); extern void __fsnotify_inode_delete(struct inode *inode); +static inline int fsnotify_inode_watches_children(struct inode *inode) +{ + /* FS_EVENT_ON_CHILD is set if the inode may care */ + if (!(inode->i_fsnotify_mask & FS_EVENT_ON_CHILD)) + return 0; + /* this inode might care about child events, does it care about the + * specific set of events that can happen on a child? */ + return inode->i_fsnotify_mask & FS_EVENTS_POSS_ON_CHILD; +} + +/* + * Update the dentry with a flag indicating the interest of its parent to receive + * filesystem events when those events happens to this dentry->d_inode. + */ +static inline void __fsnotify_update_dcache_flags(struct dentry *dentry) +{ + struct dentry *parent; + + assert_spin_locked(&dcache_lock); + assert_spin_locked(&dentry->d_lock); + + parent = dentry->d_parent; + if (fsnotify_inode_watches_children(parent->d_inode)) + dentry->d_flags |= DCACHE_FSNOTIFY_PARENT_WATCHED; + else + dentry->d_flags &= ~DCACHE_FSNOTIFY_PARENT_WATCHED; +} + +/* + * fsnotify_d_instantiate - instantiate a dentry for inode + * Called with dcache_lock held. + */ +static inline void __fsnotify_d_instantiate(struct dentry *dentry, struct inode *inode) +{ + if (!inode) + return; + + assert_spin_locked(&dcache_lock); + + spin_lock(&dentry->d_lock); + __fsnotify_update_dcache_flags(dentry); + spin_unlock(&dentry->d_lock); +} /* called from fsnotify listeners, such as fanotify or dnotify */ @@ -230,9 +285,18 @@ extern struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 static inline void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is) {} +static inline void __fsnotify_parent(struct dentry *dentry, __u32 mask) +{} + static inline void __fsnotify_inode_delete(struct inode *inode) {} +static inline void __fsnotify_update_dcache_flags(struct dentry *dentry) +{} + +static inline void __fsnotify_d_instantiate(struct dentry *dentry, struct inode *inode) +{} + #endif /* CONFIG_FSNOTIFY */ #endif /* __KERNEL __ */ -- cgit v1.2.3 From 3c5119c05d624f95f4967d16b38c9624b816bdb9 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Thu, 21 May 2009 17:01:33 -0400 Subject: dnotify: reimplement dnotify using fsnotify Reimplement dnotify using fsnotify. Signed-off-by: Eric Paris Acked-by: Al Viro Cc: Christoph Hellwig --- include/linux/dnotify.h | 29 +++++------------ include/linux/fs.h | 5 --- include/linux/fsnotify.h | 68 +++++++++++++--------------------------- include/linux/fsnotify_backend.h | 3 ++ 4 files changed, 32 insertions(+), 73 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dnotify.h b/include/linux/dnotify.h index 102a902b4396..ecc06286226d 100644 --- a/include/linux/dnotify.h +++ b/include/linux/dnotify.h @@ -10,7 +10,7 @@ struct dnotify_struct { struct dnotify_struct * dn_next; - unsigned long dn_mask; + __u32 dn_mask; int dn_fd; struct file * dn_filp; fl_owner_t dn_owner; @@ -21,23 +21,18 @@ struct dnotify_struct { #ifdef CONFIG_DNOTIFY -extern void __inode_dir_notify(struct inode *, unsigned long); +#define DNOTIFY_ALL_EVENTS (FS_DELETE | FS_DELETE_CHILD |\ + FS_MODIFY | FS_MODIFY_CHILD |\ + FS_ACCESS | FS_ACCESS_CHILD |\ + FS_ATTRIB | FS_ATTRIB_CHILD |\ + FS_CREATE | FS_DN_RENAME |\ + FS_MOVED_FROM | FS_MOVED_TO) + extern void dnotify_flush(struct file *, fl_owner_t); extern int fcntl_dirnotify(int, struct file *, unsigned long); -extern void dnotify_parent(struct dentry *, unsigned long); - -static inline void inode_dir_notify(struct inode *inode, unsigned long event) -{ - if (inode->i_dnotify_mask & (event)) - __inode_dir_notify(inode, event); -} #else -static inline void __inode_dir_notify(struct inode *inode, unsigned long event) -{ -} - static inline void dnotify_flush(struct file *filp, fl_owner_t id) { } @@ -47,14 +42,6 @@ static inline int fcntl_dirnotify(int fd, struct file *filp, unsigned long arg) return -EINVAL; } -static inline void dnotify_parent(struct dentry *dentry, unsigned long event) -{ -} - -static inline void inode_dir_notify(struct inode *inode, unsigned long event) -{ -} - #endif /* CONFIG_DNOTIFY */ #endif /* __KERNEL __ */ diff --git a/include/linux/fs.h b/include/linux/fs.h index 275b0860044c..323b5ce474c1 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -760,11 +760,6 @@ struct inode { struct hlist_head i_fsnotify_mark_entries; /* fsnotify mark entries */ #endif -#ifdef CONFIG_DNOTIFY - unsigned long i_dnotify_mask; /* Directory notify events */ - struct dnotify_struct *i_dnotify; /* for directory notifications */ -#endif - #ifdef CONFIG_INOTIFY struct list_head inotify_watches; /* watches on this inode */ struct mutex inotify_mutex; /* protects the watches list */ diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h index 6a662ed0bc8a..db12d9de3526 100644 --- a/include/linux/fsnotify.h +++ b/include/linux/fsnotify.h @@ -74,13 +74,7 @@ static inline void fsnotify_move(struct inode *old_dir, struct inode *new_dir, __u32 new_dir_mask = 0; if (old_dir == new_dir) { - inode_dir_notify(old_dir, DN_RENAME); old_dir_mask = FS_DN_RENAME; - } else { - inode_dir_notify(old_dir, DN_DELETE); - old_dir_mask = FS_DELETE; - inode_dir_notify(new_dir, DN_CREATE); - new_dir_mask = FS_CREATE; } if (isdir) { @@ -132,7 +126,6 @@ static inline void fsnotify_nameremove(struct dentry *dentry, int isdir) if (isdir) mask |= FS_IN_ISDIR; - dnotify_parent(dentry, DN_DELETE); fsnotify_parent(dentry, mask); } @@ -154,7 +147,6 @@ static inline void fsnotify_inoderemove(struct inode *inode) */ static inline void fsnotify_create(struct inode *inode, struct dentry *dentry) { - inode_dir_notify(inode, DN_CREATE); inotify_inode_queue_event(inode, IN_CREATE, 0, dentry->d_name.name, dentry->d_inode); audit_inode_child(dentry->d_name.name, dentry, inode); @@ -169,7 +161,6 @@ static inline void fsnotify_create(struct inode *inode, struct dentry *dentry) */ static inline void fsnotify_link(struct inode *dir, struct inode *inode, struct dentry *new_dentry) { - inode_dir_notify(dir, DN_CREATE); inotify_inode_queue_event(dir, IN_CREATE, 0, new_dentry->d_name.name, inode); fsnotify_link_count(inode); @@ -186,7 +177,6 @@ static inline void fsnotify_mkdir(struct inode *inode, struct dentry *dentry) __u32 mask = (FS_CREATE | FS_IN_ISDIR); struct inode *d_inode = dentry->d_inode; - inode_dir_notify(inode, DN_CREATE); inotify_inode_queue_event(inode, mask, 0, dentry->d_name.name, d_inode); audit_inode_child(dentry->d_name.name, dentry, inode); @@ -204,7 +194,6 @@ static inline void fsnotify_access(struct dentry *dentry) if (S_ISDIR(inode->i_mode)) mask |= FS_IN_ISDIR; - dnotify_parent(dentry, DN_ACCESS); inotify_inode_queue_event(inode, mask, 0, NULL, NULL); fsnotify_parent(dentry, mask); @@ -222,7 +211,6 @@ static inline void fsnotify_modify(struct dentry *dentry) if (S_ISDIR(inode->i_mode)) mask |= FS_IN_ISDIR; - dnotify_parent(dentry, DN_MODIFY); inotify_inode_queue_event(inode, mask, 0, NULL, NULL); fsnotify_parent(dentry, mask); @@ -289,47 +277,33 @@ static inline void fsnotify_xattr(struct dentry *dentry) static inline void fsnotify_change(struct dentry *dentry, unsigned int ia_valid) { struct inode *inode = dentry->d_inode; - int dn_mask = 0; - __u32 in_mask = 0; + __u32 mask = 0; + + if (ia_valid & ATTR_UID) + mask |= FS_ATTRIB; + if (ia_valid & ATTR_GID) + mask |= FS_ATTRIB; + if (ia_valid & ATTR_SIZE) + mask |= FS_MODIFY; - if (ia_valid & ATTR_UID) { - in_mask |= FS_ATTRIB; - dn_mask |= DN_ATTRIB; - } - if (ia_valid & ATTR_GID) { - in_mask |= FS_ATTRIB; - dn_mask |= DN_ATTRIB; - } - if (ia_valid & ATTR_SIZE) { - in_mask |= FS_MODIFY; - dn_mask |= DN_MODIFY; - } /* both times implies a utime(s) call */ if ((ia_valid & (ATTR_ATIME | ATTR_MTIME)) == (ATTR_ATIME | ATTR_MTIME)) - { - in_mask |= FS_ATTRIB; - dn_mask |= DN_ATTRIB; - } else if (ia_valid & ATTR_ATIME) { - in_mask |= FS_ACCESS; - dn_mask |= DN_ACCESS; - } else if (ia_valid & ATTR_MTIME) { - in_mask |= FS_MODIFY; - dn_mask |= DN_MODIFY; - } - if (ia_valid & ATTR_MODE) { - in_mask |= FS_ATTRIB; - dn_mask |= DN_ATTRIB; - } + mask |= FS_ATTRIB; + else if (ia_valid & ATTR_ATIME) + mask |= FS_ACCESS; + else if (ia_valid & ATTR_MTIME) + mask |= FS_MODIFY; + + if (ia_valid & ATTR_MODE) + mask |= FS_ATTRIB; - if (dn_mask) - dnotify_parent(dentry, dn_mask); - if (in_mask) { + if (mask) { if (S_ISDIR(inode->i_mode)) - in_mask |= FS_IN_ISDIR; - inotify_inode_queue_event(inode, in_mask, 0, NULL, NULL); + mask |= FS_IN_ISDIR; + inotify_inode_queue_event(inode, mask, 0, NULL, NULL); - fsnotify_parent(dentry, in_mask); - fsnotify(inode, in_mask, inode, FSNOTIFY_EVENT_INODE); + fsnotify_parent(dentry, mask); + fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE); } } diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h index 13d2dd570049..9ea800e840f1 100644 --- a/include/linux/fsnotify_backend.h +++ b/include/linux/fsnotify_backend.h @@ -57,6 +57,9 @@ FS_MOVED_FROM | FS_MOVED_TO | FS_CREATE |\ FS_DELETE) +/* listeners that hard code group numbers near the top */ +#define DNOTIFY_GROUP_NUM UINT_MAX + struct fsnotify_group; struct fsnotify_event; struct fsnotify_mark_entry; -- cgit v1.2.3 From a2d8bc6cb4a3024661baf877242f123787d0c054 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Thu, 21 May 2009 17:01:37 -0400 Subject: fsnotify: generic notification queue and waitq inotify needs to do asyc notification in which event information is stored on a queue until the listener is ready to receive it. This patch implements a generic notification queue for inotify (and later fanotify) to store events to be sent at a later time. Signed-off-by: Eric Paris Acked-by: Al Viro Cc: Christoph Hellwig --- include/linux/fsnotify_backend.h | 37 +++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) (limited to 'include/linux') diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h index 9ea800e840f1..15f8f82a5c57 100644 --- a/include/linux/fsnotify_backend.h +++ b/include/linux/fsnotify_backend.h @@ -119,6 +119,13 @@ struct fsnotify_group { const struct fsnotify_ops *ops; /* how this group handles things */ + /* needed to send notification to userspace */ + struct mutex notification_mutex; /* protect the notification_list */ + struct list_head notification_list; /* list of event_holder this group needs to send to userspace */ + wait_queue_head_t notification_waitq; /* read() on the notification file blocks on this waitq */ + unsigned int q_len; /* events on the queue */ + unsigned int max_events; /* maximum events allowed on the list */ + /* stores all fastapth entries assoc with this group so they can be cleaned on unregister */ spinlock_t mark_lock; /* protect mark_entries list */ atomic_t num_marks; /* 1 for each mark entry and 1 for not being @@ -135,12 +142,33 @@ struct fsnotify_group { }; }; +/* + * A single event can be queued in multiple group->notification_lists. + * + * each group->notification_list will point to an event_holder which in turns points + * to the actual event that needs to be sent to userspace. + * + * Seemed cheaper to create a refcnt'd event and a small holder for every group + * than create a different event for every group + * + */ +struct fsnotify_event_holder { + struct fsnotify_event *event; + struct list_head event_list; +}; + /* * all of the information about the original object we want to now send to * a group. If you want to carry more info from the accessing task to the * listener this structure is where you need to be adding fields. */ struct fsnotify_event { + /* + * If we create an event we are also likely going to need a holder + * to link to a group. So embed one holder in the event. Means only + * one allocation for the common case where we only have one group + */ + struct fsnotify_event_holder holder; spinlock_t lock; /* protection for the associated event_holder and private_list */ /* to_tell may ONLY be dereferenced during handle_event(). */ struct inode *to_tell; /* either the inode the event happened to or its parent */ @@ -264,6 +292,15 @@ extern void fsnotify_put_event(struct fsnotify_event *event); extern struct fsnotify_event_private_data *fsnotify_get_priv_from_event(struct fsnotify_group *group, struct fsnotify_event *event); +/* attach the event to the group notification queue */ +extern int fsnotify_add_notify_event(struct fsnotify_group *group, struct fsnotify_event *event); +/* true if the group notification queue is empty */ +extern bool fsnotify_notify_queue_is_empty(struct fsnotify_group *group); +/* return, but do not dequeue the first event on the notification queue */ +extern struct fsnotify_event *fsnotify_peek_notify_event(struct fsnotify_group *group); +/* reutnr AND dequeue the first event on the notification queue */ +extern struct fsnotify_event *fsnotify_remove_notify_event(struct fsnotify_group *group); + /* functions used to manipulate the marks attached to inodes */ /* run all marks associated with an inode and update inode->i_fsnotify_mask */ -- cgit v1.2.3 From 62ffe5dfba056f7ba81d710fee9f28c58a42fdd6 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Thu, 21 May 2009 17:01:43 -0400 Subject: fsnotify: include pathnames with entries when possible When inotify wants to send events to a directory about a child it includes the name of the original file. This patch collects that filename and makes it available for notification. Signed-off-by: Eric Paris Acked-by: Al Viro Cc: Christoph Hellwig --- include/linux/fsnotify.h | 28 ++++++++++++++-------------- include/linux/fsnotify_backend.h | 11 ++++++++--- 2 files changed, 22 insertions(+), 17 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h index db12d9de3526..180740e9ec82 100644 --- a/include/linux/fsnotify.h +++ b/include/linux/fsnotify.h @@ -58,7 +58,7 @@ static inline void fsnotify_link_count(struct inode *inode) { inotify_inode_queue_event(inode, IN_ATTRIB, 0, NULL, NULL); - fsnotify(inode, FS_ATTRIB, inode, FSNOTIFY_EVENT_INODE); + fsnotify(inode, FS_ATTRIB, inode, FSNOTIFY_EVENT_INODE, NULL); } /* @@ -91,8 +91,8 @@ static inline void fsnotify_move(struct inode *old_dir, struct inode *new_dir, inotify_inode_queue_event(new_dir, IN_MOVED_TO|isdir, cookie, new_name, source); - fsnotify(old_dir, old_dir_mask, old_dir, FSNOTIFY_EVENT_INODE); - fsnotify(new_dir, new_dir_mask, new_dir, FSNOTIFY_EVENT_INODE); + fsnotify(old_dir, old_dir_mask, old_dir, FSNOTIFY_EVENT_INODE, old_name); + fsnotify(new_dir, new_dir_mask, new_dir, FSNOTIFY_EVENT_INODE, new_name); if (target) { inotify_inode_queue_event(target, IN_DELETE_SELF, 0, NULL, NULL); @@ -104,7 +104,7 @@ static inline void fsnotify_move(struct inode *old_dir, struct inode *new_dir, if (source) { inotify_inode_queue_event(source, IN_MOVE_SELF, 0, NULL, NULL); - fsnotify(source, FS_MOVE_SELF, moved->d_inode, FSNOTIFY_EVENT_INODE); + fsnotify(source, FS_MOVE_SELF, moved->d_inode, FSNOTIFY_EVENT_INODE, NULL); } audit_inode_child(new_name, moved, new_dir); } @@ -138,7 +138,7 @@ static inline void fsnotify_inoderemove(struct inode *inode) inotify_inode_queue_event(inode, IN_DELETE_SELF, 0, NULL, NULL); inotify_inode_is_dead(inode); - fsnotify(inode, FS_DELETE_SELF, inode, FSNOTIFY_EVENT_INODE); + fsnotify(inode, FS_DELETE_SELF, inode, FSNOTIFY_EVENT_INODE, NULL); __fsnotify_inode_delete(inode); } @@ -151,7 +151,7 @@ static inline void fsnotify_create(struct inode *inode, struct dentry *dentry) dentry->d_inode); audit_inode_child(dentry->d_name.name, dentry, inode); - fsnotify(inode, FS_CREATE, dentry->d_inode, FSNOTIFY_EVENT_INODE); + fsnotify(inode, FS_CREATE, dentry->d_inode, FSNOTIFY_EVENT_INODE, dentry->d_name.name); } /* @@ -166,7 +166,7 @@ static inline void fsnotify_link(struct inode *dir, struct inode *inode, struct fsnotify_link_count(inode); audit_inode_child(new_dentry->d_name.name, new_dentry, dir); - fsnotify(dir, FS_CREATE, inode, FSNOTIFY_EVENT_INODE); + fsnotify(dir, FS_CREATE, inode, FSNOTIFY_EVENT_INODE, new_dentry->d_name.name); } /* @@ -180,7 +180,7 @@ static inline void fsnotify_mkdir(struct inode *inode, struct dentry *dentry) inotify_inode_queue_event(inode, mask, 0, dentry->d_name.name, d_inode); audit_inode_child(dentry->d_name.name, dentry, inode); - fsnotify(inode, mask, d_inode, FSNOTIFY_EVENT_INODE); + fsnotify(inode, mask, d_inode, FSNOTIFY_EVENT_INODE, dentry->d_name.name); } /* @@ -197,7 +197,7 @@ static inline void fsnotify_access(struct dentry *dentry) inotify_inode_queue_event(inode, mask, 0, NULL, NULL); fsnotify_parent(dentry, mask); - fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE); + fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL); } /* @@ -214,7 +214,7 @@ static inline void fsnotify_modify(struct dentry *dentry) inotify_inode_queue_event(inode, mask, 0, NULL, NULL); fsnotify_parent(dentry, mask); - fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE); + fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL); } /* @@ -231,7 +231,7 @@ static inline void fsnotify_open(struct dentry *dentry) inotify_inode_queue_event(inode, mask, 0, NULL, NULL); fsnotify_parent(dentry, mask); - fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE); + fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL); } /* @@ -250,7 +250,7 @@ static inline void fsnotify_close(struct file *file) inotify_inode_queue_event(inode, mask, 0, NULL, NULL); fsnotify_parent(dentry, mask); - fsnotify(inode, mask, file, FSNOTIFY_EVENT_FILE); + fsnotify(inode, mask, file, FSNOTIFY_EVENT_FILE, NULL); } /* @@ -267,7 +267,7 @@ static inline void fsnotify_xattr(struct dentry *dentry) inotify_inode_queue_event(inode, mask, 0, NULL, NULL); fsnotify_parent(dentry, mask); - fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE); + fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL); } /* @@ -303,7 +303,7 @@ static inline void fsnotify_change(struct dentry *dentry, unsigned int ia_valid) inotify_inode_queue_event(inode, mask, 0, NULL, NULL); fsnotify_parent(dentry, mask); - fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE); + fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL); } } diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h index 15f8f82a5c57..52692f405890 100644 --- a/include/linux/fsnotify_backend.h +++ b/include/linux/fsnotify_backend.h @@ -192,6 +192,9 @@ struct fsnotify_event { int data_type; /* which of the above union we have */ atomic_t refcnt; /* how many groups still are using/need to send this event */ __u32 mask; /* the type of access, bitwise OR for FS_* event types */ + + char *file_name; + size_t name_len; }; /* @@ -224,7 +227,7 @@ struct fsnotify_mark_entry { /* called from the vfs helpers */ /* main fsnotify call to send events */ -extern void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is); +extern void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is, const char *name); extern void __fsnotify_parent(struct dentry *dentry, __u32 mask); extern void __fsnotify_inode_delete(struct inode *inode); @@ -319,10 +322,12 @@ extern void fsnotify_put_mark(struct fsnotify_mark_entry *entry); /* put here because inotify does some weird stuff when destroying watches */ extern struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask, - void *data, int data_is); + void *data, int data_is, const char *name); + #else -static inline void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is) +static inline void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is, + const char *name); {} static inline void __fsnotify_parent(struct dentry *dentry, __u32 mask) -- cgit v1.2.3 From 47882c6f51e8ef41fbbe2bbb746a1ea3228dd7ca Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Thu, 21 May 2009 17:01:47 -0400 Subject: fsnotify: add correlations between events As part of the standard inotify events it includes a correlation cookie between two dentry move operations. This patch includes the same behaviour in fsnotify events. It is needed so that inotify userspace can be implemented on top of fsnotify. Signed-off-by: Eric Paris Acked-by: Al Viro Cc: Christoph Hellwig --- include/linux/fsnotify.h | 35 ++++++++++++++++++----------------- include/linux/fsnotify_backend.h | 15 ++++++++++++--- 2 files changed, 30 insertions(+), 20 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h index 180740e9ec82..c25b39ddd62a 100644 --- a/include/linux/fsnotify.h +++ b/include/linux/fsnotify.h @@ -58,7 +58,7 @@ static inline void fsnotify_link_count(struct inode *inode) { inotify_inode_queue_event(inode, IN_ATTRIB, 0, NULL, NULL); - fsnotify(inode, FS_ATTRIB, inode, FSNOTIFY_EVENT_INODE, NULL); + fsnotify(inode, FS_ATTRIB, inode, FSNOTIFY_EVENT_INODE, NULL, 0); } /* @@ -69,7 +69,8 @@ static inline void fsnotify_move(struct inode *old_dir, struct inode *new_dir, int isdir, struct inode *target, struct dentry *moved) { struct inode *source = moved->d_inode; - u32 cookie = inotify_get_cookie(); + u32 in_cookie = inotify_get_cookie(); + u32 fs_cookie = fsnotify_get_cookie(); __u32 old_dir_mask = 0; __u32 new_dir_mask = 0; @@ -86,13 +87,13 @@ static inline void fsnotify_move(struct inode *old_dir, struct inode *new_dir, old_dir_mask |= FS_MOVED_FROM; new_dir_mask |= FS_MOVED_TO; - inotify_inode_queue_event(old_dir, IN_MOVED_FROM|isdir,cookie,old_name, + inotify_inode_queue_event(old_dir, IN_MOVED_FROM|isdir, in_cookie, old_name, source); - inotify_inode_queue_event(new_dir, IN_MOVED_TO|isdir, cookie, new_name, + inotify_inode_queue_event(new_dir, IN_MOVED_TO|isdir, in_cookie, new_name, source); - fsnotify(old_dir, old_dir_mask, old_dir, FSNOTIFY_EVENT_INODE, old_name); - fsnotify(new_dir, new_dir_mask, new_dir, FSNOTIFY_EVENT_INODE, new_name); + fsnotify(old_dir, old_dir_mask, old_dir, FSNOTIFY_EVENT_INODE, old_name, fs_cookie); + fsnotify(new_dir, new_dir_mask, new_dir, FSNOTIFY_EVENT_INODE, new_name, fs_cookie); if (target) { inotify_inode_queue_event(target, IN_DELETE_SELF, 0, NULL, NULL); @@ -104,7 +105,7 @@ static inline void fsnotify_move(struct inode *old_dir, struct inode *new_dir, if (source) { inotify_inode_queue_event(source, IN_MOVE_SELF, 0, NULL, NULL); - fsnotify(source, FS_MOVE_SELF, moved->d_inode, FSNOTIFY_EVENT_INODE, NULL); + fsnotify(source, FS_MOVE_SELF, moved->d_inode, FSNOTIFY_EVENT_INODE, NULL, 0); } audit_inode_child(new_name, moved, new_dir); } @@ -138,7 +139,7 @@ static inline void fsnotify_inoderemove(struct inode *inode) inotify_inode_queue_event(inode, IN_DELETE_SELF, 0, NULL, NULL); inotify_inode_is_dead(inode); - fsnotify(inode, FS_DELETE_SELF, inode, FSNOTIFY_EVENT_INODE, NULL); + fsnotify(inode, FS_DELETE_SELF, inode, FSNOTIFY_EVENT_INODE, NULL, 0); __fsnotify_inode_delete(inode); } @@ -151,7 +152,7 @@ static inline void fsnotify_create(struct inode *inode, struct dentry *dentry) dentry->d_inode); audit_inode_child(dentry->d_name.name, dentry, inode); - fsnotify(inode, FS_CREATE, dentry->d_inode, FSNOTIFY_EVENT_INODE, dentry->d_name.name); + fsnotify(inode, FS_CREATE, dentry->d_inode, FSNOTIFY_EVENT_INODE, dentry->d_name.name, 0); } /* @@ -166,7 +167,7 @@ static inline void fsnotify_link(struct inode *dir, struct inode *inode, struct fsnotify_link_count(inode); audit_inode_child(new_dentry->d_name.name, new_dentry, dir); - fsnotify(dir, FS_CREATE, inode, FSNOTIFY_EVENT_INODE, new_dentry->d_name.name); + fsnotify(dir, FS_CREATE, inode, FSNOTIFY_EVENT_INODE, new_dentry->d_name.name, 0); } /* @@ -180,7 +181,7 @@ static inline void fsnotify_mkdir(struct inode *inode, struct dentry *dentry) inotify_inode_queue_event(inode, mask, 0, dentry->d_name.name, d_inode); audit_inode_child(dentry->d_name.name, dentry, inode); - fsnotify(inode, mask, d_inode, FSNOTIFY_EVENT_INODE, dentry->d_name.name); + fsnotify(inode, mask, d_inode, FSNOTIFY_EVENT_INODE, dentry->d_name.name, 0); } /* @@ -197,7 +198,7 @@ static inline void fsnotify_access(struct dentry *dentry) inotify_inode_queue_event(inode, mask, 0, NULL, NULL); fsnotify_parent(dentry, mask); - fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL); + fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0); } /* @@ -214,7 +215,7 @@ static inline void fsnotify_modify(struct dentry *dentry) inotify_inode_queue_event(inode, mask, 0, NULL, NULL); fsnotify_parent(dentry, mask); - fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL); + fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0); } /* @@ -231,7 +232,7 @@ static inline void fsnotify_open(struct dentry *dentry) inotify_inode_queue_event(inode, mask, 0, NULL, NULL); fsnotify_parent(dentry, mask); - fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL); + fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0); } /* @@ -250,7 +251,7 @@ static inline void fsnotify_close(struct file *file) inotify_inode_queue_event(inode, mask, 0, NULL, NULL); fsnotify_parent(dentry, mask); - fsnotify(inode, mask, file, FSNOTIFY_EVENT_FILE, NULL); + fsnotify(inode, mask, file, FSNOTIFY_EVENT_FILE, NULL, 0); } /* @@ -267,7 +268,7 @@ static inline void fsnotify_xattr(struct dentry *dentry) inotify_inode_queue_event(inode, mask, 0, NULL, NULL); fsnotify_parent(dentry, mask); - fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL); + fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0); } /* @@ -303,7 +304,7 @@ static inline void fsnotify_change(struct dentry *dentry, unsigned int ia_valid) inotify_inode_queue_event(inode, mask, 0, NULL, NULL); fsnotify_parent(dentry, mask); - fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL); + fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0); } } diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h index 52692f405890..b78b5573d227 100644 --- a/include/linux/fsnotify_backend.h +++ b/include/linux/fsnotify_backend.h @@ -193,6 +193,7 @@ struct fsnotify_event { atomic_t refcnt; /* how many groups still are using/need to send this event */ __u32 mask; /* the type of access, bitwise OR for FS_* event types */ + u32 sync_cookie; /* used to corrolate events, namely inotify mv events */ char *file_name; size_t name_len; }; @@ -227,9 +228,11 @@ struct fsnotify_mark_entry { /* called from the vfs helpers */ /* main fsnotify call to send events */ -extern void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is, const char *name); +extern void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is, + const char *name, u32 cookie); extern void __fsnotify_parent(struct dentry *dentry, __u32 mask); extern void __fsnotify_inode_delete(struct inode *inode); +extern u32 fsnotify_get_cookie(void); static inline int fsnotify_inode_watches_children(struct inode *inode) { @@ -322,12 +325,13 @@ extern void fsnotify_put_mark(struct fsnotify_mark_entry *entry); /* put here because inotify does some weird stuff when destroying watches */ extern struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask, - void *data, int data_is, const char *name); + void *data, int data_is, const char *name, + u32 cookie); #else static inline void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is, - const char *name); + const char *name, u32 cookie) {} static inline void __fsnotify_parent(struct dentry *dentry, __u32 mask) @@ -342,6 +346,11 @@ static inline void __fsnotify_update_dcache_flags(struct dentry *dentry) static inline void __fsnotify_d_instantiate(struct dentry *dentry, struct inode *inode) {} +static inline u32 fsnotify_get_cookie(void) +{ + return 0; +} + #endif /* CONFIG_FSNOTIFY */ #endif /* __KERNEL __ */ -- cgit v1.2.3 From e4aff117368cfdd3567ee41844d216d079b55173 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Thu, 21 May 2009 17:01:50 -0400 Subject: fsnotify: allow groups to add private data to events inotify needs per group information attached to events. This patch allows groups to attach private information and implements a callback so that information can be freed when an event is being destroyed. Signed-off-by: Eric Paris Acked-by: Al Viro Cc: Christoph Hellwig --- include/linux/fsnotify_backend.h | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h index b78b5573d227..efdf9e442d86 100644 --- a/include/linux/fsnotify_backend.h +++ b/include/linux/fsnotify_backend.h @@ -63,6 +63,7 @@ struct fsnotify_group; struct fsnotify_event; struct fsnotify_mark_entry; +struct fsnotify_event_private_data; /* * Each group much define these ops. The fsnotify infrastructure will call @@ -81,6 +82,7 @@ struct fsnotify_ops { int (*handle_event)(struct fsnotify_group *group, struct fsnotify_event *event); void (*free_group_priv)(struct fsnotify_group *group); void (*freeing_mark)(struct fsnotify_mark_entry *entry, struct fsnotify_group *group); + void (*free_event_priv)(struct fsnotify_event_private_data *priv); }; /* @@ -157,6 +159,15 @@ struct fsnotify_event_holder { struct list_head event_list; }; +/* + * Inotify needs to tack data onto an event. This struct lets us later find the + * correct private data of the correct group. + */ +struct fsnotify_event_private_data { + struct fsnotify_group *group; + struct list_head event_list; +}; + /* * all of the information about the original object we want to now send to * a group. If you want to carry more info from the accessing task to the @@ -196,6 +207,8 @@ struct fsnotify_event { u32 sync_cookie; /* used to corrolate events, namely inotify mv events */ char *file_name; size_t name_len; + + struct list_head private_data_list; /* groups can store private data here */ }; /* @@ -294,17 +307,18 @@ extern void fsnotify_put_group(struct fsnotify_group *group); /* take a reference to an event */ extern void fsnotify_get_event(struct fsnotify_event *event); extern void fsnotify_put_event(struct fsnotify_event *event); -/* find private data previously attached to an event */ -extern struct fsnotify_event_private_data *fsnotify_get_priv_from_event(struct fsnotify_group *group, - struct fsnotify_event *event); +/* find private data previously attached to an event and unlink it */ +extern struct fsnotify_event_private_data *fsnotify_remove_priv_from_event(struct fsnotify_group *group, + struct fsnotify_event *event); /* attach the event to the group notification queue */ -extern int fsnotify_add_notify_event(struct fsnotify_group *group, struct fsnotify_event *event); +extern int fsnotify_add_notify_event(struct fsnotify_group *group, struct fsnotify_event *event, + struct fsnotify_event_private_data *priv); /* true if the group notification queue is empty */ extern bool fsnotify_notify_queue_is_empty(struct fsnotify_group *group); /* return, but do not dequeue the first event on the notification queue */ extern struct fsnotify_event *fsnotify_peek_notify_event(struct fsnotify_group *group); -/* reutnr AND dequeue the first event on the notification queue */ +/* return AND dequeue the first event on the notification queue */ extern struct fsnotify_event *fsnotify_remove_notify_event(struct fsnotify_group *group); /* functions used to manipulate the marks attached to inodes */ -- cgit v1.2.3 From 164bc6195139047faaf5ada1278332e99494803b Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Thu, 21 May 2009 17:01:58 -0400 Subject: fsnotify: handle filesystem unmounts with fsnotify marks When an fs is unmounted with an fsnotify mark entry attached to one of its inodes we need to destroy that mark entry and we also (like inotify) send an unmount event. Signed-off-by: Eric Paris Acked-by: Al Viro Cc: Christoph Hellwig --- include/linux/fsnotify_backend.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h index efdf9e442d86..d2c0ee30e618 100644 --- a/include/linux/fsnotify_backend.h +++ b/include/linux/fsnotify_backend.h @@ -336,6 +336,7 @@ extern void fsnotify_destroy_mark_by_entry(struct fsnotify_mark_entry *entry); extern void fsnotify_clear_marks_by_group(struct fsnotify_group *group); extern void fsnotify_get_mark(struct fsnotify_mark_entry *entry); extern void fsnotify_put_mark(struct fsnotify_mark_entry *entry); +extern void fsnotify_unmount_inodes(struct list_head *list); /* put here because inotify does some weird stuff when destroying watches */ extern struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask, @@ -365,6 +366,9 @@ static inline u32 fsnotify_get_cookie(void) return 0; } +static inline void fsnotify_unmount_inodes(struct list_head *list) +{} + #endif /* CONFIG_FSNOTIFY */ #endif /* __KERNEL __ */ -- cgit v1.2.3 From 63c882a05416e18de6fb59f7dd6da48f3bbe8273 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Thu, 21 May 2009 17:02:01 -0400 Subject: inotify: reimplement inotify using fsnotify Reimplement inotify_user using fsnotify. This should be feature for feature exactly the same as the original inotify_user. This does not make any changes to the in kernel inotify feature used by audit. Those patches (and the eventual removal of in kernel inotify) will come after the new inotify_user proves to be working correctly. Signed-off-by: Eric Paris Acked-by: Al Viro Cc: Christoph Hellwig --- include/linux/fsnotify_backend.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/linux') diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h index d2c0ee30e618..44848aa830dc 100644 --- a/include/linux/fsnotify_backend.h +++ b/include/linux/fsnotify_backend.h @@ -9,6 +9,7 @@ #ifdef __KERNEL__ +#include /* inotify uses this */ #include /* struct inode */ #include #include /* struct path */ @@ -59,6 +60,7 @@ /* listeners that hard code group numbers near the top */ #define DNOTIFY_GROUP_NUM UINT_MAX +#define INOTIFY_GROUP_NUM (DNOTIFY_GROUP_NUM-1) struct fsnotify_group; struct fsnotify_event; @@ -141,6 +143,15 @@ struct fsnotify_group { /* groups can define private fields here or use the void *private */ union { void *private; +#ifdef CONFIG_INOTIFY_USER + struct inotify_group_private_data { + spinlock_t idr_lock; + struct idr idr; + u32 last_wd; + struct fasync_struct *fa; /* async notification */ + struct user_struct *user; + } inotify_data; +#endif }; }; -- cgit v1.2.3 From ff52cc2158b32b3b979ca7802b1fd7c70f36e13c Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Thu, 11 Jun 2009 11:09:47 -0400 Subject: fsnotify: move events should indicate the event was on a child fsnotify tells its listeners explicitly when an event happened on the given inode verses on the child of the given inode. (see __fsnotify_parent) However, the semantics of fsnotify_move() are such that we deliver events directly to the two parent directories in question (old_dir and new_dir) directly without using the __fsnotify_parent() call. fsnotify should be adding FS_EVENT_ON_CHILD for the notifications to these parents. Signed-off-by: Eric Paris --- include/linux/fsnotify.h | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h index c25b39ddd62a..936f9aa8bb97 100644 --- a/include/linux/fsnotify.h +++ b/include/linux/fsnotify.h @@ -71,12 +71,11 @@ static inline void fsnotify_move(struct inode *old_dir, struct inode *new_dir, struct inode *source = moved->d_inode; u32 in_cookie = inotify_get_cookie(); u32 fs_cookie = fsnotify_get_cookie(); - __u32 old_dir_mask = 0; - __u32 new_dir_mask = 0; + __u32 old_dir_mask = (FS_EVENT_ON_CHILD | FS_MOVED_FROM); + __u32 new_dir_mask = (FS_EVENT_ON_CHILD | FS_MOVED_TO); - if (old_dir == new_dir) { - old_dir_mask = FS_DN_RENAME; - } + if (old_dir == new_dir) + old_dir_mask |= FS_DN_RENAME; if (isdir) { isdir = IN_ISDIR; @@ -84,9 +83,6 @@ static inline void fsnotify_move(struct inode *old_dir, struct inode *new_dir, new_dir_mask |= FS_IN_ISDIR; } - old_dir_mask |= FS_MOVED_FROM; - new_dir_mask |= FS_MOVED_TO; - inotify_inode_queue_event(old_dir, IN_MOVED_FROM|isdir, in_cookie, old_name, source); inotify_inode_queue_event(new_dir, IN_MOVED_TO|isdir, in_cookie, new_name, -- cgit v1.2.3 From 73422811d290c628b4ddbf6830e5cd6fa42e84f1 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Sun, 10 May 2009 16:05:39 -0400 Subject: reiserfs: allow exposing privroot w/ xattrs enabled This patch adds an -oexpose_privroot option to allow access to the privroot. Signed-off-by: Jeff Mahoney Signed-off-by: Al Viro --- include/linux/reiserfs_fs_sb.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/reiserfs_fs_sb.h b/include/linux/reiserfs_fs_sb.h index 6473650c28f1..dab68bbed675 100644 --- a/include/linux/reiserfs_fs_sb.h +++ b/include/linux/reiserfs_fs_sb.h @@ -453,6 +453,7 @@ enum reiserfs_mount_options { REISERFS_ATTRS, REISERFS_XATTRS_USER, REISERFS_POSIXACL, + REISERFS_EXPOSE_PRIVROOT, REISERFS_BARRIER_NONE, REISERFS_BARRIER_FLUSH, @@ -490,6 +491,7 @@ enum reiserfs_mount_options { #define reiserfs_data_writeback(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_DATA_WRITEBACK)) #define reiserfs_xattrs_user(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_XATTRS_USER)) #define reiserfs_posixacl(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_POSIXACL)) +#define reiserfs_expose_privroot(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_EXPOSE_PRIVROOT)) #define reiserfs_xattrs_optional(s) (reiserfs_xattrs_user(s) || reiserfs_posixacl(s)) #define reiserfs_barrier_none(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_BARRIER_NONE)) #define reiserfs_barrier_flush(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_BARRIER_FLUSH)) -- cgit v1.2.3 From 2a737871108de9ba8930f7650d549f1383767f8b Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 7 Apr 2009 11:49:53 -0400 Subject: Cache root in nameidata New field: nd->root. When pathname resolution wants to know the root, check if nd->root.mnt is non-NULL; use nd->root if it is, otherwise copy current->fs->root there. After path_walk() is finished, we check if we'd got a cached value in nd->root and drop it. Before calling path_walk() we should either set nd->root.mnt to NULL *or* copy (and pin down) some path to nd->root. In the latter case we won't be looking at current->fs->root at all. Signed-off-by: Al Viro --- include/linux/namei.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/namei.h b/include/linux/namei.h index 518098fe63af..325dd3ad39a0 100644 --- a/include/linux/namei.h +++ b/include/linux/namei.h @@ -18,6 +18,7 @@ enum { MAX_NESTED_LINKS = 8 }; struct nameidata { struct path path; struct qstr last; + struct path root; unsigned int flags; int last_type; unsigned depth; -- cgit v1.2.3 From 91c9fa8f75877c0c1e455c23e8f8206c91c8f77f Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 18 Apr 2009 02:42:05 -0400 Subject: switch rqst_exp_get_by_name() Signed-off-by: Al Viro --- include/linux/nfsd/export.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nfsd/export.h b/include/linux/nfsd/export.h index bcd0201589f8..98f6fd584d53 100644 --- a/include/linux/nfsd/export.h +++ b/include/linux/nfsd/export.h @@ -125,8 +125,7 @@ void nfsd_export_flush(void); void exp_readlock(void); void exp_readunlock(void); struct svc_export * rqst_exp_get_by_name(struct svc_rqst *, - struct vfsmount *, - struct dentry *); + struct path *); struct svc_export * rqst_exp_parent(struct svc_rqst *, struct vfsmount *mnt, struct dentry *dentry); -- cgit v1.2.3 From e64c390ca0b60fd2119331ef1fa888d7ea27e424 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 18 Apr 2009 03:00:46 -0400 Subject: switch rqst_exp_parent() Signed-off-by: Al Viro --- include/linux/nfsd/export.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nfsd/export.h b/include/linux/nfsd/export.h index 98f6fd584d53..a6d9ef2bb34a 100644 --- a/include/linux/nfsd/export.h +++ b/include/linux/nfsd/export.h @@ -127,8 +127,7 @@ void exp_readunlock(void); struct svc_export * rqst_exp_get_by_name(struct svc_rqst *, struct path *); struct svc_export * rqst_exp_parent(struct svc_rqst *, - struct vfsmount *mnt, - struct dentry *dentry); + struct path *); int exp_rootfh(struct auth_domain *, char *path, struct knfsd_fh *, int maxsize); __be32 exp_pseudoroot(struct svc_rqst *, struct svc_fh *); -- cgit v1.2.3 From bab77ebf51e3902f608ecf08c9d34a0a52ac35a9 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 18 Apr 2009 03:26:48 -0400 Subject: switch follow_up() to struct path Signed-off-by: Al Viro --- include/linux/namei.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/namei.h b/include/linux/namei.h index 325dd3ad39a0..9cd5a717be3b 100644 --- a/include/linux/namei.h +++ b/include/linux/namei.h @@ -79,7 +79,7 @@ extern struct dentry *lookup_one_len(const char *, struct dentry *, int); extern struct dentry *lookup_one_noperm(const char *, struct dentry *); extern int follow_down(struct vfsmount **, struct dentry **); -extern int follow_up(struct vfsmount **, struct dentry **); +extern int follow_up(struct path *); extern struct dentry *lock_rename(struct dentry *, struct dentry *); extern void unlock_rename(struct dentry *, struct dentry *); -- cgit v1.2.3 From 589ff870ed60a9ebdd5ec99ec3f5afe1282fe151 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 18 Apr 2009 03:28:19 -0400 Subject: Switch collect_mounts() to struct path Signed-off-by: Al Viro --- include/linux/fs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 323b5ce474c1..03fb2102b8f3 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1800,7 +1800,7 @@ extern struct vfsmount *kern_mount_data(struct file_system_type *, void *data); extern int may_umount_tree(struct vfsmount *); extern int may_umount(struct vfsmount *); extern long do_mount(char *, char *, char *, unsigned long, void *); -extern struct vfsmount *collect_mounts(struct vfsmount *, struct dentry *); +extern struct vfsmount *collect_mounts(struct path *); extern void drop_collected_mounts(struct vfsmount *); extern int vfs_statfs(struct dentry *, struct kstatfs *); -- cgit v1.2.3 From 9393bd07cf218ca51d0e627653f906a9d76a9131 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 18 Apr 2009 13:58:15 -0400 Subject: switch follow_down() Signed-off-by: Al Viro --- include/linux/namei.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/namei.h b/include/linux/namei.h index 9cd5a717be3b..d870ae2faedc 100644 --- a/include/linux/namei.h +++ b/include/linux/namei.h @@ -78,7 +78,7 @@ extern void release_open_intent(struct nameidata *); extern struct dentry *lookup_one_len(const char *, struct dentry *, int); extern struct dentry *lookup_one_noperm(const char *, struct dentry *); -extern int follow_down(struct vfsmount **, struct dentry **); +extern int follow_down(struct path *); extern int follow_up(struct path *); extern struct dentry *lock_rename(struct dentry *, struct dentry *); -- cgit v1.2.3 From 1c755af4df75996b0dd4b7e6cacaf9d57a6ef2ef Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 18 Apr 2009 14:06:57 -0400 Subject: switch lookup_mnt() Signed-off-by: Al Viro --- include/linux/dcache.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/dcache.h b/include/linux/dcache.h index 97978004338d..72ce2ae88591 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -370,7 +370,7 @@ static inline int d_mountpoint(struct dentry *dentry) return dentry->d_mounted; } -extern struct vfsmount *lookup_mnt(struct vfsmount *, struct dentry *); +extern struct vfsmount *lookup_mnt(struct path *); extern struct dentry *lookup_create(struct nameidata *nd, int is_dir); extern int sysctl_vfs_cache_pressure; -- cgit v1.2.3 From 3174c21b74b56c6a53fddd41a30fd6f757a32bd0 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 7 Apr 2009 13:19:18 -0400 Subject: Move junk from proc_fs.h to fs/proc/internal.h Signed-off-by: Al Viro --- include/linux/proc_fs.h | 24 ------------------------ 1 file changed, 24 deletions(-) (limited to 'include/linux') diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h index fbfa3d44d33d..e6e77d31c418 100644 --- a/include/linux/proc_fs.h +++ b/include/linux/proc_fs.h @@ -93,20 +93,9 @@ struct vmcore { #ifdef CONFIG_PROC_FS -extern spinlock_t proc_subdir_lock; - extern void proc_root_init(void); void proc_flush_task(struct task_struct *task); -struct dentry *proc_pid_lookup(struct inode *dir, struct dentry * dentry, struct nameidata *); -int proc_pid_readdir(struct file * filp, void * dirent, filldir_t filldir); -unsigned long task_vsize(struct mm_struct *); -int task_statm(struct mm_struct *, int *, int *, int *, int *); -void task_mem(struct seq_file *, struct mm_struct *); -void clear_refs_smap(struct mm_struct *mm); - -struct proc_dir_entry *de_get(struct proc_dir_entry *de); -void de_put(struct proc_dir_entry *de); extern struct proc_dir_entry *create_proc_entry(const char *name, mode_t mode, struct proc_dir_entry *parent); @@ -116,20 +105,7 @@ struct proc_dir_entry *proc_create_data(const char *name, mode_t mode, void *data); extern void remove_proc_entry(const char *name, struct proc_dir_entry *parent); -extern struct vfsmount *proc_mnt; struct pid_namespace; -extern int proc_fill_super(struct super_block *); -extern struct inode *proc_get_inode(struct super_block *, unsigned int, struct proc_dir_entry *); - -/* - * These are generic /proc routines that use the internal - * "struct proc_dir_entry" tree to traverse the filesystem. - * - * The /proc root directory has extended versions to take care - * of the /proc/ subdirectories. - */ -extern int proc_readdir(struct file *, void *, filldir_t); -extern struct dentry *proc_lookup(struct inode *, struct dentry *, struct nameidata *); extern int pid_ns_prepare_proc(struct pid_namespace *ns); extern void pid_ns_release_proc(struct pid_namespace *ns); -- cgit v1.2.3 From d3ef3d7351ccfbef3e5d926efc5ee332136f40d4 Mon Sep 17 00:00:00 2001 From: "npiggin@suse.de" Date: Sun, 26 Apr 2009 20:25:54 +1000 Subject: fs: mnt_want_write speedup This patch speeds up lmbench lat_mmap test by about 8%. lat_mmap is set up basically to mmap a 64MB file on tmpfs, fault in its pages, then unmap it. A microbenchmark yes, but it exercises some important paths in the mm. Before: avg = 501.9 std = 14.7773 After: avg = 462.286 std = 5.46106 (50 runs of each, stddev gives a reasonable confidence, but there is quite a bit of variation there still) It does this by removing the complex per-cpu locking and counter-cache and replaces it with a percpu counter in struct vfsmount. This makes the code much simpler, and avoids spinlocks (although the msync is still pretty costly, unfortunately). It results in about 900 bytes smaller code too. It does increase the size of a vfsmount, however. It should also give a speedup on large systems if CPUs are frequently operating on different mounts (because the existing scheme has to operate on an atomic in the struct vfsmount when switching between mounts). But I'm most interested in the single threaded path performance for the moment. [AV: minor cleanup] Cc: Dave Hansen Signed-off-by: Nick Piggin Signed-off-by: Al Viro --- include/linux/mount.h | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mount.h b/include/linux/mount.h index 51f55f903aff..ac49c1f8e5c0 100644 --- a/include/linux/mount.h +++ b/include/linux/mount.h @@ -30,7 +30,7 @@ struct mnt_namespace; #define MNT_STRICTATIME 0x80 #define MNT_SHRINKABLE 0x100 -#define MNT_IMBALANCED_WRITE_COUNT 0x200 /* just for debugging */ +#define MNT_WRITE_HOLD 0x200 #define MNT_SHARED 0x1000 /* if the vfsmount is a shared mount */ #define MNT_UNBINDABLE 0x2000 /* if the vfsmount is a unbindable mount */ @@ -65,13 +65,22 @@ struct vfsmount { int mnt_expiry_mark; /* true if marked for expiry */ int mnt_pinned; int mnt_ghosts; - /* - * This value is not stable unless all of the mnt_writers[] spinlocks - * are held, and all mnt_writer[]s on this mount have 0 as their ->count - */ - atomic_t __mnt_writers; +#ifdef CONFIG_SMP + int *mnt_writers; +#else + int mnt_writers; +#endif }; +static inline int *get_mnt_writers_ptr(struct vfsmount *mnt) +{ +#ifdef CONFIG_SMP + return mnt->mnt_writers; +#else + return &mnt->mnt_writers; +#endif +} + static inline struct vfsmount *mntget(struct vfsmount *mnt) { if (mnt) -- cgit v1.2.3 From 96029c4e09ccbd73a6d0ed2b29e80bf2586ad7ef Mon Sep 17 00:00:00 2001 From: "npiggin@suse.de" Date: Sun, 26 Apr 2009 20:25:55 +1000 Subject: fs: introduce mnt_clone_write This patch speeds up lmbench lat_mmap test by about another 2% after the first patch. Before: avg = 462.286 std = 5.46106 After: avg = 453.12 std = 9.58257 (50 runs of each, stddev gives a reasonable confidence) It does this by introducing mnt_clone_write, which avoids some heavyweight operations of mnt_want_write if called on a vfsmount which we know already has a write count; and mnt_want_write_file, which can call mnt_clone_write if the file is open for write. After these two patches, mnt_want_write and mnt_drop_write go from 7% on the profile down to 1.3% (including mnt_clone_write). [AV: mnt_want_write_file() should take file alone and derive mnt from it; not only all callers have that form, but that's the only mnt about which we know that it's already held for write if file is opened for write] Cc: Dave Hansen Signed-off-by: Nick Piggin Signed-off-by: Al Viro --- include/linux/mount.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mount.h b/include/linux/mount.h index ac49c1f8e5c0..5d5275364867 100644 --- a/include/linux/mount.h +++ b/include/linux/mount.h @@ -88,7 +88,11 @@ static inline struct vfsmount *mntget(struct vfsmount *mnt) return mnt; } +struct file; /* forward dec */ + extern int mnt_want_write(struct vfsmount *mnt); +extern int mnt_want_write_file(struct file *file); +extern int mnt_clone_write(struct vfsmount *mnt); extern void mnt_drop_write(struct vfsmount *mnt); extern void mntput_no_expire(struct vfsmount *mnt); extern void mnt_pin(struct vfsmount *mnt); -- cgit v1.2.3 From 876a9f76abbcb775f8d21cbc99fa161f9e5937f1 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 28 Apr 2009 18:05:55 +0200 Subject: remove s_async_list Remove the unused s_async_list in the superblock, a leftover of the broken async inode deletion code that leaked into mainline. Having this in the middle of the sync/unmount path is not helpful for the following cleanups. Signed-off-by: Christoph Hellwig Signed-off-by: Al Viro --- include/linux/fs.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 03fb2102b8f3..36bcff7036ef 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1372,11 +1372,6 @@ struct super_block { * generic_show_options() */ char *s_options; - - /* - * storage for asynchronous operations - */ - struct list_head s_async_list; }; extern struct timespec current_fs_time(struct super_block *sb); -- cgit v1.2.3 From 429479f031322a0cc5c921ffb2321a51718dc875 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 27 Apr 2009 16:43:50 +0200 Subject: vfs: Make __fsync_super() a static function (version 4) __fsync_super() does the same thing as fsync_super(). So change the only caller to use fsync_super() and make __fsync_super() static. This removes unnecessarily duplicated call to sync_blockdev() and prepares ground for the changes to __fsync_super() in the following patches. Signed-off-by: Jan Kara Signed-off-by: Al Viro --- include/linux/fs.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 36bcff7036ef..41a9907f342e 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2078,7 +2078,6 @@ extern int filemap_fdatawrite_range(struct address_space *mapping, extern int vfs_fsync(struct file *file, struct dentry *dentry, int datasync); extern void sync_supers(void); extern void sync_filesystems(int wait); -extern void __fsync_super(struct super_block *sb); extern void emergency_sync(void); extern void emergency_remount(void); extern int do_remount_sb(struct super_block *sb, int flags, -- cgit v1.2.3 From 5cee5815d1564bbbd505fea86f4550f1efdb5cd0 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 27 Apr 2009 16:43:51 +0200 Subject: vfs: Make sys_sync() use fsync_super() (version 4) It is unnecessarily fragile to have two places (fsync_super() and do_sync()) doing data integrity sync of the filesystem. Alter __fsync_super() to accommodate needs of both callers and use it. So after this patch __fsync_super() is the only place where we gather all the calls needed to properly send all data on a filesystem to disk. Nice bonus is that we get a complete livelock avoidance and write_supers() is now only used for periodic writeback of superblocks. sync_blockdevs() introduced a couple of patches ago is gone now. [build fixes folded] Signed-off-by: Jan Kara Signed-off-by: Al Viro --- include/linux/fs.h | 2 +- include/linux/writeback.h | 1 - 2 files changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 41a9907f342e..f00df653cf2b 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1321,7 +1321,7 @@ struct super_block { struct rw_semaphore s_umount; struct mutex s_lock; int s_count; - int s_need_sync_fs; + int s_need_sync; atomic_t s_active; #ifdef CONFIG_SECURITY void *s_security; diff --git a/include/linux/writeback.h b/include/linux/writeback.h index 93445477f86a..3224820c8514 100644 --- a/include/linux/writeback.h +++ b/include/linux/writeback.h @@ -79,7 +79,6 @@ struct writeback_control { void writeback_inodes(struct writeback_control *wbc); int inode_wait(void *); void sync_inodes_sb(struct super_block *, int wait); -void sync_inodes(int wait); /* writeback.h requires fs.h; it, too, is not included from here. */ static inline void wait_on_inode(struct inode *inode) -- cgit v1.2.3 From c15c54f5f056ee4819da9fde59a5f2cd45445f23 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 27 Apr 2009 16:43:52 +0200 Subject: vfs: Move syncing code from super.c to sync.c (version 4) Move sync_filesystems(), __fsync_super(), fsync_super() from super.c to sync.c where it fits better. [build fixes folded] Signed-off-by: Jan Kara Signed-off-by: Al Viro --- include/linux/fs.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index f00df653cf2b..d3f7159993cf 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1942,7 +1942,6 @@ extern struct super_block *freeze_bdev(struct block_device *); extern void emergency_thaw_all(void); extern int thaw_bdev(struct block_device *bdev, struct super_block *sb); extern int fsync_bdev(struct block_device *); -extern int fsync_super(struct super_block *); extern int fsync_no_super(struct block_device *); #else static inline void bd_forget(struct inode *inode) {} @@ -1959,6 +1958,7 @@ static inline int thaw_bdev(struct block_device *bdev, struct super_block *sb) return 0; } #endif +extern int fsync_super(struct super_block *); extern const struct file_operations def_blk_fops; extern const struct file_operations def_chr_fops; extern const struct file_operations bad_sock_fops; @@ -2077,7 +2077,6 @@ extern int filemap_fdatawrite_range(struct address_space *mapping, extern int vfs_fsync(struct file *file, struct dentry *dentry, int datasync); extern void sync_supers(void); -extern void sync_filesystems(int wait); extern void emergency_sync(void); extern void emergency_remount(void); extern int do_remount_sb(struct super_block *sb, int flags, -- cgit v1.2.3 From 60b0680fa236ac4e17ce31a50048c9d75f9ec831 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 27 Apr 2009 16:43:53 +0200 Subject: vfs: Rename fsync_super() to sync_filesystem() (version 4) Rename the function so that it better describe what it really does. Also remove the unnecessary include of buffer_head.h. Signed-off-by: Jan Kara Signed-off-by: Al Viro --- include/linux/fs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index d3f7159993cf..fb1822bed7c8 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1958,7 +1958,7 @@ static inline int thaw_bdev(struct block_device *bdev, struct super_block *sb) return 0; } #endif -extern int fsync_super(struct super_block *); +extern int sync_filesystem(struct super_block *); extern const struct file_operations def_blk_fops; extern const struct file_operations def_chr_fops; extern const struct file_operations bad_sock_fops; -- cgit v1.2.3 From 850b201b087f5525a0a7278551c2bcd0423c3b26 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 27 Apr 2009 16:43:54 +0200 Subject: quota: cleanup dquota sync functions (version 4) Currently the VFS calls vfs_dq_sync to sync out disk quotas for a given superblock. This is a small wrapper around sync_dquots which for the case of a non-NULL superblock is a small wrapper around quota_sync_sb. Just make quota_sync_sb global (rename it to sync_quota_sb) and call it directly. Also call it directly for those cases in quota.c that have a superblock and leave sync_dquots purely an iterator over sync_quota_sb and remove it's superblock argument. To make this nicer move the check for the lack of a quota_sync method from the callers into sync_quota_sb. [folded build fix from Alexander Beregalov ] Signed-off-by: Christoph Hellwig Signed-off-by: Jan Kara Signed-off-by: Al Viro --- include/linux/quotaops.h | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h index 36353d95c8db..047310fa22fb 100644 --- a/include/linux/quotaops.h +++ b/include/linux/quotaops.h @@ -20,7 +20,7 @@ static inline struct quota_info *sb_dqopt(struct super_block *sb) /* * declaration of quota_function calls in kernel. */ -void sync_dquots(struct super_block *sb, int type); +void sync_quota_sb(struct super_block *sb, int type); int dquot_initialize(struct inode *inode, int type); int dquot_drop(struct inode *inode); @@ -253,12 +253,7 @@ static inline void vfs_dq_free_inode(struct inode *inode) inode->i_sb->dq_op->free_inode(inode, 1); } -/* The following two functions cannot be called inside a transaction */ -static inline void vfs_dq_sync(struct super_block *sb) -{ - sync_dquots(sb, -1); -} - +/* Cannot be called inside a transaction */ static inline int vfs_dq_off(struct super_block *sb, int remount) { int ret = -ENOSYS; @@ -334,7 +329,7 @@ static inline void vfs_dq_free_inode(struct inode *inode) { } -static inline void vfs_dq_sync(struct super_block *sb) +static inline void sync_quota_sb(struct super_block *sb, int type) { } -- cgit v1.2.3 From c3f8a40c1cd5591b882497d1d00d43d0e5bb4698 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 27 Apr 2009 16:43:55 +0200 Subject: quota: Introduce writeout_quota_sb() (version 4) Introduce this function which just writes all the quota structures but avoids all the syncing and cache pruning work to expose quota structures to userspace. Use this function from __sync_filesystem when wait == 0. Signed-off-by: Jan Kara Signed-off-by: Al Viro --- include/linux/quotaops.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h index 047310fa22fb..7bc457593684 100644 --- a/include/linux/quotaops.h +++ b/include/linux/quotaops.h @@ -21,6 +21,11 @@ static inline struct quota_info *sb_dqopt(struct super_block *sb) * declaration of quota_function calls in kernel. */ void sync_quota_sb(struct super_block *sb, int type); +static inline void writeout_quota_sb(struct super_block *sb, int type) +{ + if (sb->s_qcop->quota_sync) + sb->s_qcop->quota_sync(sb, type); +} int dquot_initialize(struct inode *inode, int type); int dquot_drop(struct inode *inode); @@ -333,6 +338,10 @@ static inline void sync_quota_sb(struct super_block *sb, int type) { } +static inline void writeout_quota_sb(struct super_block *sb, int type) +{ +} + static inline int vfs_dq_off(struct super_block *sb, int remount) { return 0; -- cgit v1.2.3 From f3da392e9ff14b9f388e74319e6d195848991c07 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Mon, 4 May 2009 03:32:03 +0400 Subject: dcache: extrace and use d_unlinked() d_unlinked() will be used in middle-term to ban checkpointing when opened but unlinked file is detected, and in long term, to detect such situation and special case on it. Signed-off-by: Alexey Dobriyan Signed-off-by: Al Viro --- include/linux/dcache.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/dcache.h b/include/linux/dcache.h index 72ce2ae88591..30b93b2a01a4 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -353,6 +353,11 @@ static inline int d_unhashed(struct dentry *dentry) return (dentry->d_flags & DCACHE_UNHASHED); } +static inline int d_unlinked(struct dentry *dentry) +{ + return d_unhashed(dentry) && !IS_ROOT(dentry); +} + static inline struct dentry *dget_parent(struct dentry *dentry) { struct dentry *ret; -- cgit v1.2.3 From 62c6943b4b1e818aea60c11c5a68a50785b83119 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 7 May 2009 03:12:29 -0400 Subject: Trim a bit of crap from fs.h do_remount_sb() is fs/internal.h fodder, fsync_no_super() is long gone. Signed-off-by: Al Viro --- include/linux/fs.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index fb1822bed7c8..e7833ef5d1d6 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1942,7 +1942,6 @@ extern struct super_block *freeze_bdev(struct block_device *); extern void emergency_thaw_all(void); extern int thaw_bdev(struct block_device *bdev, struct super_block *sb); extern int fsync_bdev(struct block_device *); -extern int fsync_no_super(struct block_device *); #else static inline void bd_forget(struct inode *inode) {} static inline int sync_blockdev(struct block_device *bdev) { return 0; } @@ -2079,8 +2078,6 @@ extern int vfs_fsync(struct file *file, struct dentry *dentry, int datasync); extern void sync_supers(void); extern void emergency_sync(void); extern void emergency_remount(void); -extern int do_remount_sb(struct super_block *sb, int flags, - void *data, int force); #ifdef CONFIG_BLOCK extern sector_t bmap(struct inode *, sector_t); #endif -- cgit v1.2.3 From 9fd5746fd3d7838bf6ff991d50f1257057d1156f Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Thu, 21 May 2009 16:01:00 -0400 Subject: fs: Remove i_cindex from struct inode The only user of the i_cindex element in the inode structure is used is by the firewire drivers. As part of an attempt to slim down the inode structure to save memory --- since a typical Linux system will have hundreds of thousands if not millions of inodes cached, a reduction in the size inode has high leverage. The firewire driver does not need i_cindex in any fast path, so it's simple enough to calculate when it is needed, instead of wasting space in the inode structure. Signed-off-by: "Theodore Ts'o" Cc: krh@redhat.com Cc: stefanr@s5r6.in-berlin.de Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Al Viro --- include/linux/cdev.h | 2 ++ include/linux/fs.h | 1 - 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/cdev.h b/include/linux/cdev.h index fb4591977b03..f389e319a454 100644 --- a/include/linux/cdev.h +++ b/include/linux/cdev.h @@ -28,6 +28,8 @@ int cdev_add(struct cdev *, dev_t, unsigned); void cdev_del(struct cdev *); +int cdev_index(struct inode *inode); + void cd_forget(struct inode *); extern struct backing_dev_info directly_mappable_cdev_bdi; diff --git a/include/linux/fs.h b/include/linux/fs.h index e7833ef5d1d6..bcd63706db87 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -751,7 +751,6 @@ struct inode { struct block_device *i_bdev; struct cdev *i_cdev; }; - int i_cindex; __u32 i_generation; -- cgit v1.2.3 From 28ad0c118b0ed98b042d362acfe0017591921138 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Thu, 21 May 2009 16:01:02 -0400 Subject: fs: Rearrange inode structure elements to avoid waste due to padding Signed-off-by: "Theodore Ts'o" Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Al Viro --- include/linux/fs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index bcd63706db87..d883aa1fc2eb 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -729,8 +729,8 @@ struct inode { struct timespec i_atime; struct timespec i_mtime; struct timespec i_ctime; - unsigned int i_blkbits; blkcnt_t i_blocks; + unsigned int i_blkbits; unsigned short i_bytes; umode_t i_mode; spinlock_t i_lock; /* i_blocks, i_bytes, maybe i_size */ -- cgit v1.2.3 From 8688b8635266cf98f00c6b0350ea2dbe7c42c321 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 26 May 2009 05:45:04 -0400 Subject: linux/magic.h: move cramfs magic out of cramfs_fs.h Signed-off-by: Mike Frysinger CC: Alexander Viro Signed-off-by: Al Viro --- include/linux/cramfs_fs.h | 3 +-- include/linux/magic.h | 2 ++ 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/cramfs_fs.h b/include/linux/cramfs_fs.h index 3be4e5a27d82..6fc2bed368b8 100644 --- a/include/linux/cramfs_fs.h +++ b/include/linux/cramfs_fs.h @@ -2,9 +2,8 @@ #define __CRAMFS_H #include +#include -#define CRAMFS_MAGIC 0x28cd3d45 /* some random number */ -#define CRAMFS_MAGIC_WEND 0x453dcd28 /* magic number with the wrong endianess */ #define CRAMFS_SIGNATURE "Compressed ROMFS" /* diff --git a/include/linux/magic.h b/include/linux/magic.h index 927138cf3050..1923327b9869 100644 --- a/include/linux/magic.h +++ b/include/linux/magic.h @@ -6,6 +6,8 @@ #define AFS_SUPER_MAGIC 0x5346414F #define AUTOFS_SUPER_MAGIC 0x0187 #define CODA_SUPER_MAGIC 0x73757245 +#define CRAMFS_MAGIC 0x28cd3d45 /* some random number */ +#define CRAMFS_MAGIC_WEND 0x453dcd28 /* magic number with the wrong endianess */ #define DEBUGFS_MAGIC 0x64626720 #define SYSFS_MAGIC 0x62656572 #define SECURITYFS_MAGIC 0x73636673 -- cgit v1.2.3 From d5aacad548db1ff547adf35d0a77eb2a8ed4fe14 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 7 Jun 2009 14:56:44 -0400 Subject: New helper - simple_fsync() writes associated buffers, then does sync_inode() to write the inode itself (and to make it clean). Depends on ->write_inode() honouring the second argument. Signed-off-by: Al Viro --- include/linux/fs.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index d883aa1fc2eb..ede84fa7da5d 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2345,6 +2345,8 @@ extern void simple_release_fs(struct vfsmount **mount, int *count); extern ssize_t simple_read_from_buffer(void __user *to, size_t count, loff_t *ppos, const void *from, size_t available); +extern int simple_fsync(struct file *, struct dentry *, int); + #ifdef CONFIG_MIGRATION extern int buffer_migrate_page(struct address_space *, struct page *, struct page *); -- cgit v1.2.3 From 79d25767583e4e086f8309bfd1f502660a64fe7f Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 7 Jun 2009 09:30:08 -0400 Subject: Sanitize qnx4 fsync handling * have directory operations use mark_buffer_dirty_inode(), so that sync_mapping_buffers() would get those. * make qnx4_write_inode() honour its last argument. * get rid of insane copies of very ancient "walk the indirect blocks" in qnx4/fsync - they never matched the actual fs layout and, fortunately, never'd been called. Again, all this junk is not needed; ->fsync() should just do sync_mapping_buffers + sync_inode (and if we implement block allocation for qnx4, we'll need to use mark_buffer_dirty_inode() for extent blocks) Signed-off-by: Al Viro --- include/linux/qnx4_fs.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/qnx4_fs.h b/include/linux/qnx4_fs.h index 787d19ea9f46..acbaec3524e0 100644 --- a/include/linux/qnx4_fs.h +++ b/include/linux/qnx4_fs.h @@ -126,8 +126,6 @@ extern void qnx4_truncate(struct inode *inode); extern void qnx4_free_inode(struct inode *inode); extern int qnx4_unlink(struct inode *dir, struct dentry *dentry); extern int qnx4_rmdir(struct inode *dir, struct dentry *dentry); -extern int qnx4_sync_file(struct file *file, struct dentry *dentry, int); -extern int qnx4_sync_inode(struct inode *inode); static inline struct qnx4_sb_info *qnx4_sb(struct super_block *sb) { -- cgit v1.2.3 From 964f5369667b342994fe3f384e9ba41d404ee796 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 7 Jun 2009 09:47:13 -0400 Subject: fs/qnx4: sanitize includes fs-internal parts of qnx4_fs.h taken to fs/qnx4/qnx4.h, includes adjusted, qnx4_fs.h doesn't need unifdef anymore. Signed-off-by: Al Viro --- include/linux/Kbuild | 2 +- include/linux/qnx4_fs.h | 59 ------------------------------------------------- 2 files changed, 1 insertion(+), 60 deletions(-) (limited to 'include/linux') diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 3f0eaa397ef5..b3afd2219ad2 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -135,6 +135,7 @@ header-y += posix_types.h header-y += ppdev.h header-y += prctl.h header-y += qnxtypes.h +header-y += qnx4_fs.h header-y += radeonfb.h header-y += raw.h header-y += resource.h @@ -308,7 +309,6 @@ unifdef-y += poll.h unifdef-y += ppp_defs.h unifdef-y += ppp-comp.h unifdef-y += ptrace.h -unifdef-y += qnx4_fs.h unifdef-y += quota.h unifdef-y += random.h unifdef-y += irqnr.h diff --git a/include/linux/qnx4_fs.h b/include/linux/qnx4_fs.h index acbaec3524e0..8b9aee1a9ce3 100644 --- a/include/linux/qnx4_fs.h +++ b/include/linux/qnx4_fs.h @@ -85,63 +85,4 @@ struct qnx4_super_block { struct qnx4_inode_entry AltBoot; }; -#ifdef __KERNEL__ - -#define QNX4_DEBUG 0 - -#if QNX4_DEBUG -#define QNX4DEBUG(X) printk X -#else -#define QNX4DEBUG(X) (void) 0 -#endif - -struct qnx4_sb_info { - struct buffer_head *sb_buf; /* superblock buffer */ - struct qnx4_super_block *sb; /* our superblock */ - unsigned int Version; /* may be useful */ - struct qnx4_inode_entry *BitMap; /* useful */ -}; - -struct qnx4_inode_info { - struct qnx4_inode_entry raw; - loff_t mmu_private; - struct inode vfs_inode; -}; - -extern struct inode *qnx4_iget(struct super_block *, unsigned long); -extern struct dentry *qnx4_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd); -extern unsigned long qnx4_count_free_blocks(struct super_block *sb); -extern unsigned long qnx4_block_map(struct inode *inode, long iblock); - -extern struct buffer_head *qnx4_bread(struct inode *, int, int); - -extern const struct inode_operations qnx4_file_inode_operations; -extern const struct inode_operations qnx4_dir_inode_operations; -extern const struct file_operations qnx4_file_operations; -extern const struct file_operations qnx4_dir_operations; -extern int qnx4_is_free(struct super_block *sb, long block); -extern int qnx4_set_bitmap(struct super_block *sb, long block, int busy); -extern int qnx4_create(struct inode *inode, struct dentry *dentry, int mode, struct nameidata *nd); -extern void qnx4_truncate(struct inode *inode); -extern void qnx4_free_inode(struct inode *inode); -extern int qnx4_unlink(struct inode *dir, struct dentry *dentry); -extern int qnx4_rmdir(struct inode *dir, struct dentry *dentry); - -static inline struct qnx4_sb_info *qnx4_sb(struct super_block *sb) -{ - return sb->s_fs_info; -} - -static inline struct qnx4_inode_info *qnx4_i(struct inode *inode) -{ - return container_of(inode, struct qnx4_inode_info, vfs_inode); -} - -static inline struct qnx4_inode_entry *qnx4_raw_inode(struct inode *inode) -{ - return &qnx4_i(inode)->raw; -} - -#endif /* __KERNEL__ */ - #endif -- cgit v1.2.3 From ca371c0d7e23d0d0afae65fc83a0e91cf7399573 Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Fri, 12 Jun 2009 10:33:53 +0300 Subject: memcg: fix page_cgroup fatal error in FLATMEM Now, SLAB is configured in very early stage and it can be used in init routine now. But replacing alloc_bootmem() in FLAT/DISCONTIGMEM's page_cgroup() initialization breaks the allocation, now. (Works well in SPARSEMEM case...it supports MEMORY_HOTPLUG and size of page_cgroup is in reasonable size (< 1 << MAX_ORDER.) This patch revive FLATMEM+memory cgroup by using alloc_bootmem. In future, We stop to support FLATMEM (if no users) or rewrite codes for flatmem completely.But this will adds more messy codes and overheads. Reported-by: Li Zefan Tested-by: Li Zefan Tested-by: Ingo Molnar Signed-off-by: KAMEZAWA Hiroyuki Signed-off-by: Pekka Enberg --- include/linux/page_cgroup.h | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/page_cgroup.h b/include/linux/page_cgroup.h index 7339c7bf7331..13f126c89ae8 100644 --- a/include/linux/page_cgroup.h +++ b/include/linux/page_cgroup.h @@ -18,7 +18,19 @@ struct page_cgroup { }; void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat); -void __init page_cgroup_init(void); + +#ifdef CONFIG_SPARSEMEM +static inline void __init page_cgroup_init_flatmem(void) +{ +} +extern void __init page_cgroup_init(void); +#else +void __init page_cgroup_init_flatmem(void); +static inline void __init page_cgroup_init(void) +{ +} +#endif + struct page_cgroup *lookup_page_cgroup(struct page *page); enum { @@ -87,6 +99,10 @@ static inline void page_cgroup_init(void) { } +static inline void __init page_cgroup_init_flatmem(void) +{ +} + #endif #ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP -- cgit v1.2.3 From 9a71af2c3627b379b7c31917a7f6ee0d29bc559b Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 12 Jun 2009 21:46:53 -0600 Subject: module_param: invbool should take a 'bool', not an 'int' It takes an 'int' for historical reasons, and there are only two users: simply switch it over to bool. The other user (uvesafb.c) will get a (harmless-on-x86) warning until the next patch is applied. Cc: Brad Douglas Cc: Michal Januszewski Signed-off-by: Rusty Russell --- include/linux/moduleparam.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h index a4f0b931846c..9bbca8e8c19f 100644 --- a/include/linux/moduleparam.h +++ b/include/linux/moduleparam.h @@ -192,7 +192,7 @@ extern int param_get_bool(char *buffer, struct kernel_param *kp); extern int param_set_invbool(const char *val, struct kernel_param *kp); extern int param_get_invbool(char *buffer, struct kernel_param *kp); -#define param_check_invbool(name, p) __param_check(name, p, int) +#define param_check_invbool(name, p) __param_check(name, p, bool) /* Comma-separated array: *nump is set to number they actually specified. */ #define module_param_array_named(name, array, type, nump, perm) \ -- cgit v1.2.3 From 45fcc70c0b6ee0c508e1fdb5fef735c3546803f4 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 12 Jun 2009 21:46:56 -0600 Subject: module_param: split perm field into flags and perm Impact: cleanup Rather than hack KPARAM_KMALLOCED into the perm field, separate it out. Since the perm field was 32 bits and only needs 16, we don't add bloat. Signed-off-by: Rusty Russell --- include/linux/moduleparam.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h index 9bbca8e8c19f..009a5f768768 100644 --- a/include/linux/moduleparam.h +++ b/include/linux/moduleparam.h @@ -36,9 +36,13 @@ typedef int (*param_set_fn)(const char *val, struct kernel_param *kp); /* Returns length written or -errno. Buffer is 4k (ie. be short!) */ typedef int (*param_get_fn)(char *buffer, struct kernel_param *kp); +/* Flag bits for kernel_param.flags */ +#define KPARAM_KMALLOCED 1 + struct kernel_param { const char *name; - unsigned int perm; + u16 perm; + u16 flags; param_set_fn set; param_get_fn get; union { @@ -88,7 +92,7 @@ struct kparam_array static struct kernel_param __moduleparam_const __param_##name \ __used \ __attribute__ ((unused,__section__ ("__param"),aligned(sizeof(void *)))) \ - = { __param_str_##name, perm, set, get, { arg } } + = { __param_str_##name, perm, 0, set, get, { arg } } #define module_param_call(name, set, get, arg, perm) \ __module_param_call(MODULE_PARAM_PREFIX, name, set, get, arg, perm) -- cgit v1.2.3 From d2c123c27db841c6c11a63de9c144823d2b1ba76 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 12 Jun 2009 21:46:56 -0600 Subject: module_param: add __same_type convenience wrapper for __builtin_types_compatible_p Impact: new API __builtin_types_compatible_p() is a little awkward to use: it takes two types rather than types or variables, and it's just damn long. (typeof(type) == type, so this works on types as well as vars). Signed-off-by: Rusty Russell --- include/linux/compiler.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/compiler.h b/include/linux/compiler.h index 37bcb50a4d7c..04fb5135b4e1 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -261,6 +261,11 @@ void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect); # define __section(S) __attribute__ ((__section__(#S))) #endif +/* Are two types/vars the same type (ignoring qualifiers)? */ +#ifndef __same_type +# define __same_type(a, b) __builtin_types_compatible_p(typeof(a), typeof(b)) +#endif + /* * Prevent the compiler from merging or refetching accesses. The compiler * is also forbidden from reordering successive instances of ACCESS_ONCE(), -- cgit v1.2.3 From fddd520122953550ec2c8b60e7ca0d0f0d115d97 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 12 Jun 2009 21:46:57 -0600 Subject: module_param: allow 'bool' module_params to be bool, not just int. Impact: API cleanup For historical reasons, 'bool' parameters must be an int, not a bool. But there are around 600 users, so a conversion seems like useless churn. So we use __same_type() to distinguish, and handle both cases. Signed-off-by: Rusty Russell --- include/linux/moduleparam.h | 32 +++++++++++++++++++++++--------- 1 file changed, 23 insertions(+), 9 deletions(-) (limited to 'include/linux') diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h index 009a5f768768..6547c3cdbc4c 100644 --- a/include/linux/moduleparam.h +++ b/include/linux/moduleparam.h @@ -38,6 +38,7 @@ typedef int (*param_get_fn)(char *buffer, struct kernel_param *kp); /* Flag bits for kernel_param.flags */ #define KPARAM_KMALLOCED 1 +#define KPARAM_ISBOOL 2 struct kernel_param { const char *name; @@ -83,7 +84,7 @@ struct kparam_array parameters. perm sets the visibility in sysfs: 000 means it's not there, read bits mean it's readable, write bits mean it's writable. */ -#define __module_param_call(prefix, name, set, get, arg, perm) \ +#define __module_param_call(prefix, name, set, get, arg, isbool, perm) \ /* Default value instead of permissions? */ \ static int __param_perm_check_##name __attribute__((unused)) = \ BUILD_BUG_ON_ZERO((perm) < 0 || (perm) > 0777 || ((perm) & 2)) \ @@ -92,10 +93,13 @@ struct kparam_array static struct kernel_param __moduleparam_const __param_##name \ __used \ __attribute__ ((unused,__section__ ("__param"),aligned(sizeof(void *)))) \ - = { __param_str_##name, perm, 0, set, get, { arg } } + = { __param_str_##name, perm, isbool ? KPARAM_ISBOOL : 0, \ + set, get, { arg } } #define module_param_call(name, set, get, arg, perm) \ - __module_param_call(MODULE_PARAM_PREFIX, name, set, get, arg, perm) + __module_param_call(MODULE_PARAM_PREFIX, \ + name, set, get, arg, \ + __same_type(*(arg), bool), perm) /* Helper functions: type is byte, short, ushort, int, uint, long, ulong, charp, bool or invbool, or XXX if you define param_get_XXX, @@ -124,15 +128,16 @@ struct kparam_array #define core_param(name, var, type, perm) \ param_check_##type(name, &(var)); \ __module_param_call("", name, param_set_##type, param_get_##type, \ - &var, perm) + &var, __same_type(var, bool), perm) #endif /* !MODULE */ /* Actually copy string: maxlen param is usually sizeof(string). */ #define module_param_string(name, string, len, perm) \ static const struct kparam_string __param_string_##name \ = { len, string }; \ - module_param_call(name, param_set_copystring, param_get_string, \ - .str = &__param_string_##name, perm); \ + __module_param_call(MODULE_PARAM_PREFIX, name, \ + param_set_copystring, param_get_string, \ + .str = &__param_string_##name, 0, perm); \ __MODULE_PARM_TYPE(name, "string") /* Called on module insert or kernel boot */ @@ -190,9 +195,16 @@ extern int param_set_charp(const char *val, struct kernel_param *kp); extern int param_get_charp(char *buffer, struct kernel_param *kp); #define param_check_charp(name, p) __param_check(name, p, char *) +/* For historical reasons "bool" parameters can be (unsigned) "int". */ extern int param_set_bool(const char *val, struct kernel_param *kp); extern int param_get_bool(char *buffer, struct kernel_param *kp); -#define param_check_bool(name, p) __param_check(name, p, int) +#define param_check_bool(name, p) \ + static inline void __check_##name(void) \ + { \ + BUILD_BUG_ON(!__same_type(*(p), bool) && \ + !__same_type(*(p), unsigned int) && \ + !__same_type(*(p), int)); \ + } extern int param_set_invbool(const char *val, struct kernel_param *kp); extern int param_get_invbool(char *buffer, struct kernel_param *kp); @@ -203,8 +215,10 @@ extern int param_get_invbool(char *buffer, struct kernel_param *kp); static const struct kparam_array __param_arr_##name \ = { ARRAY_SIZE(array), nump, param_set_##type, param_get_##type,\ sizeof(array[0]), array }; \ - module_param_call(name, param_array_set, param_array_get, \ - .arr = &__param_arr_##name, perm); \ + __module_param_call(MODULE_PARAM_PREFIX, name, \ + param_array_set, param_array_get, \ + .arr = &__param_arr_##name, \ + __same_type(array[0], bool), perm); \ __MODULE_PARM_TYPE(name, "array of " #type) #define module_param_array(name, type, nump, perm) \ -- cgit v1.2.3 From ad6561dffa17f17bb68d7207d422c26c381c4313 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 12 Jun 2009 21:47:03 -0600 Subject: module: trim exception table on init free. It's theoretically possible that there are exception table entries which point into the (freed) init text of modules. These could cause future problems if other modules get loaded into that memory and cause an exception as we'd see the wrong fixup. The only case I know of is kvm-intel.ko (when CONFIG_CC_OPTIMIZE_FOR_SIZE=n). Amerigo fixed this long-standing FIXME in the x86 version, but this patch is more general. This implements trim_init_extable(); most archs are simple since they use the standard lib/extable.c sort code. Alpha and IA64 use relative addresses in their fixups, so thier trimming is a slight variation. Sparc32 is unique; it doesn't seem to define ARCH_HAS_SORT_EXTABLE, yet it defines its own sort_extable() which overrides the one in lib. It doesn't sort, so we have to mark deleted entries instead of actually trimming them. Inspired-by: Amerigo Wang Signed-off-by: Rusty Russell Cc: linux-alpha@vger.kernel.org Cc: sparclinux@vger.kernel.org Cc: linux-ia64@vger.kernel.org --- include/linux/module.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/module.h b/include/linux/module.h index a8f2c0aa4c32..a7bc6e7b43a7 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -77,6 +77,7 @@ search_extable(const struct exception_table_entry *first, void sort_extable(struct exception_table_entry *start, struct exception_table_entry *finish); void sort_main_extable(void); +void trim_init_extable(struct module *m); #ifdef MODULE #define MODULE_GENERIC_TABLE(gtype,name) \ -- cgit v1.2.3 From f1a3c979059b2033d0b1cc4f9ee5c90bf92b5f94 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 11 Jun 2009 17:56:09 +0200 Subject: perf_counter: PERF_TYPE_HW_CACHE is a hardware counter too is_software_counter() was missing the new HW_CACHE category. ( This could have caused some counter scheduling artifacts with mixed sw and hw counters and counter groups. ) Signed-off-by: Peter Zijlstra Cc: Mike Galbraith Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo LKML-Reference: Signed-off-by: Ingo Molnar --- include/linux/perf_counter.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h index 6e133954e2e4..7c4f32f6ae1a 100644 --- a/include/linux/perf_counter.h +++ b/include/linux/perf_counter.h @@ -621,7 +621,8 @@ extern int perf_counter_overflow(struct perf_counter *counter, int nmi, static inline int is_software_counter(struct perf_counter *counter) { return (counter->attr.type != PERF_TYPE_RAW) && - (counter->attr.type != PERF_TYPE_HARDWARE); + (counter->attr.type != PERF_TYPE_HARDWARE) && + (counter->attr.type != PERF_TYPE_HW_CACHE); } extern void perf_swcounter_event(u32, u64, int, struct pt_regs *, u64); -- cgit v1.2.3 From 974802eaa1afdc87e00821df7020a2b3c6fee623 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 12 Jun 2009 12:46:55 +0200 Subject: perf_counter: Add forward/backward attribute ABI compatibility Provide for means of extending the perf_counter_attr in a 'natural' way. We allow growing the structure by appending fields at the end by specifying the full structure size inside it. When a new kernel sees a smaller (old) structure, it will 0 pad the tail. When an old kernel sees a larger (new) structure, it will verify the tail consists of 0s, otherwise fail. If we fail due to a size-mismatch, we return -E2BIG and write the kernel's native attribe size back into the provided structure. Furthermore, add some attribute verification, so that we'll fail counter creation when unknown bits are present (PERF_SAMPLE, PERF_FORMAT, or in the __reserved fields). (This ABI detail is introduced while keeping the existing syscall ABI.) Signed-off-by: Peter Zijlstra Cc: Mike Galbraith Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo LKML-Reference: Signed-off-by: Ingo Molnar --- include/linux/perf_counter.h | 19 +++++++++++++++---- include/linux/syscalls.h | 2 +- 2 files changed, 16 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h index 7c4f32f6ae1a..1b3118a1023a 100644 --- a/include/linux/perf_counter.h +++ b/include/linux/perf_counter.h @@ -120,6 +120,8 @@ enum perf_counter_sample_format { PERF_SAMPLE_ID = 1U << 6, PERF_SAMPLE_CPU = 1U << 7, PERF_SAMPLE_PERIOD = 1U << 8, + + PERF_SAMPLE_MAX = 1U << 9, /* non-ABI */ }; /* @@ -131,17 +133,26 @@ enum perf_counter_read_format { PERF_FORMAT_TOTAL_TIME_ENABLED = 1U << 0, PERF_FORMAT_TOTAL_TIME_RUNNING = 1U << 1, PERF_FORMAT_ID = 1U << 2, + + PERF_FORMAT_MAX = 1U << 3, /* non-ABI */ }; +#define PERF_ATTR_SIZE_VER0 64 /* sizeof first published struct */ + /* * Hardware event to monitor via a performance monitoring counter: */ struct perf_counter_attr { + /* * Major type: hardware/software/tracepoint/etc. */ __u32 type; - __u32 __reserved_1; + + /* + * Size of the attr structure, for fwd/bwd compat. + */ + __u32 size; /* * Type specific configuration information. @@ -168,12 +179,12 @@ struct perf_counter_attr { comm : 1, /* include comm data */ freq : 1, /* use freq, not period */ - __reserved_2 : 53; + __reserved_1 : 53; __u32 wakeup_events; /* wakeup every n events */ - __u32 __reserved_3; + __u32 __reserved_2; - __u64 __reserved_4; + __u64 __reserved_3; }; /* diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index c6c84ad8bd71..418d90f5effe 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -758,6 +758,6 @@ int kernel_execve(const char *filename, char *const argv[], char *const envp[]); asmlinkage long sys_perf_counter_open( - const struct perf_counter_attr __user *attr_uptr, + struct perf_counter_attr __user *attr_uptr, pid_t pid, int cpu, int group_fd, unsigned long flags); #endif -- cgit v1.2.3 From 20f77f5654042cf484d8964b618faf9d620f639b Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 12 Jun 2009 22:16:33 -0600 Subject: virtio: fix obsolete documentation on probe function Signed-off-by: Rusty Russell --- include/linux/virtio.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/virtio.h b/include/linux/virtio.h index 06005fa9e982..9410394bbf96 100644 --- a/include/linux/virtio.h +++ b/include/linux/virtio.h @@ -99,8 +99,7 @@ void unregister_virtio_device(struct virtio_device *dev); * @id_table: the ids serviced by this driver. * @feature_table: an array of feature numbers supported by this device. * @feature_table_size: number of entries in the feature table array. - * @probe: the function to call when a device is found. Returns a token for - * remove, or PTR_ERR(). + * @probe: the function to call when a device is found. Returns 0 or -errno. * @remove: the function when a device is removed. * @config_changed: optional function to call when the device configuration * changes; may be called in interrupt context. -- cgit v1.2.3 From 9499f5e7ed5224c40706f0cec6542a9916bc7606 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 12 Jun 2009 22:16:35 -0600 Subject: virtio: add names to virtqueue struct, mapping from devices to queues. Add a linked list of all virtqueues for a virtio device: this helps for debugging and is also needed for upcoming interface change. Also, add a "name" field for clearer debug messages. Signed-off-by: Rusty Russell --- include/linux/virtio.h | 12 ++++++++---- include/linux/virtio_config.h | 6 ++++-- include/linux/virtio_ring.h | 3 ++- 3 files changed, 14 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/virtio.h b/include/linux/virtio.h index 9410394bbf96..4fca4f5440ba 100644 --- a/include/linux/virtio.h +++ b/include/linux/virtio.h @@ -10,14 +10,17 @@ /** * virtqueue - a queue to register buffers for sending or receiving. + * @list: the chain of virtqueues for this device * @callback: the function to call when buffers are consumed (can be NULL). + * @name: the name of this virtqueue (mainly for debugging) * @vdev: the virtio device this queue was created for. * @vq_ops: the operations for this virtqueue (see below). * @priv: a pointer for the virtqueue implementation to use. */ -struct virtqueue -{ +struct virtqueue { + struct list_head list; void (*callback)(struct virtqueue *vq); + const char *name; struct virtio_device *vdev; struct virtqueue_ops *vq_ops; void *priv; @@ -76,15 +79,16 @@ struct virtqueue_ops { * @dev: underlying device. * @id: the device type identification (used to match it with a driver). * @config: the configuration ops for this device. + * @vqs: the list of virtqueues for this device. * @features: the features supported by both driver and device. * @priv: private pointer for the driver's use. */ -struct virtio_device -{ +struct virtio_device { int index; struct device dev; struct virtio_device_id id; struct virtio_config_ops *config; + struct list_head vqs; /* Note that this is a Linux set_bit-style bitmap. */ unsigned long features[1]; void *priv; diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h index bf8ec283b232..9fae274751e0 100644 --- a/include/linux/virtio_config.h +++ b/include/linux/virtio_config.h @@ -55,7 +55,8 @@ * @find_vq: find a virtqueue and instantiate it. * vdev: the virtio_device * index: the 0-based virtqueue number in case there's more than one. - * callback: the virqtueue callback + * callback: the virtqueue callback + * name: the virtqueue name (mainly for debugging) * Returns the new virtqueue or ERR_PTR() (eg. -ENOENT). * @del_vq: free a virtqueue found by find_vq(). * @get_features: get the array of feature bits for this device. @@ -77,7 +78,8 @@ struct virtio_config_ops void (*reset)(struct virtio_device *vdev); struct virtqueue *(*find_vq)(struct virtio_device *vdev, unsigned index, - void (*callback)(struct virtqueue *)); + void (*callback)(struct virtqueue *), + const char *name); void (*del_vq)(struct virtqueue *vq); u32 (*get_features)(struct virtio_device *vdev); void (*finalize_features)(struct virtio_device *vdev); diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h index 71e03722fb59..166c519689de 100644 --- a/include/linux/virtio_ring.h +++ b/include/linux/virtio_ring.h @@ -119,7 +119,8 @@ struct virtqueue *vring_new_virtqueue(unsigned int num, struct virtio_device *vdev, void *pages, void (*notify)(struct virtqueue *vq), - void (*callback)(struct virtqueue *vq)); + void (*callback)(struct virtqueue *vq), + const char *name); void vring_del_virtqueue(struct virtqueue *vq); /* Filter out transport-specific feature bits. */ void vring_transport_features(struct virtio_device *vdev); -- cgit v1.2.3 From d2a7ddda9ffb1c8961abff6714b0f1eb925c120f Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Fri, 12 Jun 2009 22:16:36 -0600 Subject: virtio: find_vqs/del_vqs virtio operations This replaces find_vq/del_vq with find_vqs/del_vqs virtio operations, and updates all drivers. This is needed for MSI support, because MSI needs to know the total number of vectors upfront. Signed-off-by: Michael S. Tsirkin Signed-off-by: Rusty Russell (+ lguest/9p compile fixes) --- include/linux/virtio_config.h | 47 +++++++++++++++++++++++++++++++++---------- 1 file changed, 36 insertions(+), 11 deletions(-) (limited to 'include/linux') diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h index 9fae274751e0..4cd290c06a88 100644 --- a/include/linux/virtio_config.h +++ b/include/linux/virtio_config.h @@ -29,6 +29,7 @@ #define VIRTIO_F_NOTIFY_ON_EMPTY 24 #ifdef __KERNEL__ +#include #include /** @@ -49,16 +50,26 @@ * @set_status: write the status byte * vdev: the virtio_device * status: the new status byte + * @request_vqs: request the specified number of virtqueues + * vdev: the virtio_device + * max_vqs: the max number of virtqueues we want + * If supplied, must call before any virtqueues are instantiated. + * To modify the max number of virtqueues after request_vqs has been + * called, call free_vqs and then request_vqs with a new value. + * @free_vqs: cleanup resources allocated by request_vqs + * vdev: the virtio_device + * If supplied, must call after all virtqueues have been deleted. * @reset: reset the device * vdev: the virtio device * After this, status and feature negotiation must be done again - * @find_vq: find a virtqueue and instantiate it. + * @find_vqs: find virtqueues and instantiate them. * vdev: the virtio_device - * index: the 0-based virtqueue number in case there's more than one. - * callback: the virtqueue callback - * name: the virtqueue name (mainly for debugging) - * Returns the new virtqueue or ERR_PTR() (eg. -ENOENT). - * @del_vq: free a virtqueue found by find_vq(). + * nvqs: the number of virtqueues to find + * vqs: on success, includes new virtqueues + * callbacks: array of callbacks, for each virtqueue + * names: array of virtqueue names (mainly for debugging) + * Returns 0 on success or error status + * @del_vqs: free virtqueues found by find_vqs(). * @get_features: get the array of feature bits for this device. * vdev: the virtio_device * Returns the first 32 feature bits (all we currently need). @@ -67,6 +78,7 @@ * This gives the final feature bits for the device: it can change * the dev->feature bits if it wants. */ +typedef void vq_callback_t(struct virtqueue *); struct virtio_config_ops { void (*get)(struct virtio_device *vdev, unsigned offset, @@ -76,11 +88,11 @@ struct virtio_config_ops u8 (*get_status)(struct virtio_device *vdev); void (*set_status)(struct virtio_device *vdev, u8 status); void (*reset)(struct virtio_device *vdev); - struct virtqueue *(*find_vq)(struct virtio_device *vdev, - unsigned index, - void (*callback)(struct virtqueue *), - const char *name); - void (*del_vq)(struct virtqueue *vq); + int (*find_vqs)(struct virtio_device *, unsigned nvqs, + struct virtqueue *vqs[], + vq_callback_t *callbacks[], + const char *names[]); + void (*del_vqs)(struct virtio_device *); u32 (*get_features)(struct virtio_device *vdev); void (*finalize_features)(struct virtio_device *vdev); }; @@ -128,5 +140,18 @@ static inline int virtio_config_buf(struct virtio_device *vdev, vdev->config->get(vdev, offset, buf, len); return 0; } + +static inline +struct virtqueue *virtio_find_single_vq(struct virtio_device *vdev, + vq_callback_t *c, const char *n) +{ + vq_callback_t *callbacks[] = { c }; + const char *names[] = { n }; + struct virtqueue *vq; + int err = vdev->config->find_vqs(vdev, 1, &vq, callbacks, names); + if (err < 0) + return ERR_PTR(err); + return vq; +} #endif /* __KERNEL__ */ #endif /* _LINUX_VIRTIO_CONFIG_H */ -- cgit v1.2.3 From 82af8ce84ed65d2fb6d8c017d3f2bbbf161061fb Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Thu, 14 May 2009 13:55:41 +0300 Subject: virtio_pci: optional MSI-X support This implements optional MSI-X support in virtio_pci. MSI-X is used whenever the host supports at least 2 MSI-X vectors: 1 for configuration changes and 1 for virtqueues. Per-virtqueue vectors are allocated if enough vectors available. Signed-off-by: Michael S. Tsirkin Acked-by: Anthony Liguori Signed-off-by: Rusty Russell (+ whitespace, style) --- include/linux/virtio_pci.h | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/virtio_pci.h b/include/linux/virtio_pci.h index cd0fd5d181a6..9a3d7c48c622 100644 --- a/include/linux/virtio_pci.h +++ b/include/linux/virtio_pci.h @@ -47,9 +47,17 @@ /* The bit of the ISR which indicates a device configuration change. */ #define VIRTIO_PCI_ISR_CONFIG 0x2 +/* MSI-X registers: only enabled if MSI-X is enabled. */ +/* A 16-bit vector for configuration changes. */ +#define VIRTIO_MSI_CONFIG_VECTOR 20 +/* A 16-bit vector for selected queue notifications. */ +#define VIRTIO_MSI_QUEUE_VECTOR 22 +/* Vector value used to disable MSI for queue */ +#define VIRTIO_MSI_NO_VECTOR 0xffff + /* The remaining space is defined by each driver as the per-driver * configuration space */ -#define VIRTIO_PCI_CONFIG 20 +#define VIRTIO_PCI_CONFIG(dev) ((dev)->msix_enabled ? 24 : 20) /* Virtio ABI version, this must match exactly */ #define VIRTIO_PCI_ABI_VERSION 0 -- cgit v1.2.3 From ee006b353f1ca8c9a8470b72b462beb011d62e32 Mon Sep 17 00:00:00 2001 From: Mark McLoughlin Date: Mon, 11 May 2009 18:11:44 +0100 Subject: virtio: teach virtio_has_feature() about transport features Drivers don't add transport features to their table, so we shouldn't check these with virtio_check_driver_offered_feature(). We could perhaps add an ->offered_feature() virtio_config_op, but that perhaps that would be overkill for a consitency check like this. Signed-off-by: Mark McLoughlin Signed-off-by: Rusty Russell --- include/linux/virtio_config.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h index 4cd290c06a88..99f514575f6a 100644 --- a/include/linux/virtio_config.h +++ b/include/linux/virtio_config.h @@ -113,7 +113,9 @@ static inline bool virtio_has_feature(const struct virtio_device *vdev, if (__builtin_constant_p(fbit)) BUILD_BUG_ON(fbit >= 32); - virtio_check_driver_offered_feature(vdev, fbit); + if (fbit < VIRTIO_TRANSPORT_F_START) + virtio_check_driver_offered_feature(vdev, fbit); + return test_bit(fbit, vdev->features); } -- cgit v1.2.3 From 9fa29b9df32ba4db055f3977933cd0c1b8fe67cd Mon Sep 17 00:00:00 2001 From: Mark McLoughlin Date: Mon, 11 May 2009 18:11:45 +0100 Subject: virtio: indirect ring entries (VIRTIO_RING_F_INDIRECT_DESC) Add a new feature flag for indirect ring entries. These are ring entries which point to a table of buffer descriptors. The idea here is to increase the ring capacity by allowing a larger effective ring size whereby the ring size dictates the number of requests that may be outstanding, rather than the size of those requests. This should be most effective in the case of block I/O where we can potentially benefit by concurrently dispatching a large number of large requests. Even in the simple case of single segment block requests, this results in a threefold increase in ring capacity. Signed-off-by: Mark McLoughlin Signed-off-by: Rusty Russell --- include/linux/virtio_ring.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h index 166c519689de..693e0ec5afa6 100644 --- a/include/linux/virtio_ring.h +++ b/include/linux/virtio_ring.h @@ -14,6 +14,8 @@ #define VRING_DESC_F_NEXT 1 /* This marks a buffer as write-only (otherwise read-only). */ #define VRING_DESC_F_WRITE 2 +/* This means the buffer contains a list of buffer descriptors. */ +#define VRING_DESC_F_INDIRECT 4 /* The Host uses this in used->flags to advise the Guest: don't kick me when * you add a buffer. It's unreliable, so it's simply an optimization. Guest @@ -24,6 +26,9 @@ * optimization. */ #define VRING_AVAIL_F_NO_INTERRUPT 1 +/* We support indirect buffer descriptors */ +#define VIRTIO_RING_F_INDIRECT_DESC 28 + /* Virtio ring descriptors: 16 bytes. These can chain together via "next". */ struct vring_desc { -- cgit v1.2.3 From a32a8813d0173163ba44d8f9556e0d89fdc4fb46 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 12 Jun 2009 22:27:02 -0600 Subject: lguest: improve interrupt handling, speed up stream networking lguest never checked for pending interrupts when enabling interrupts, and things still worked. However, it makes a significant difference to TCP performance, so it's time we fixed it by introducing a pending_irq flag and checking it on irq_restore and irq_enable. These two routines are now too big to patch into the 8/10 bytes patch space, so we drop that code. Note: The high latency on interrupt delivery had a very curious effect: once everything else was optimized, networking without GSO was faster than networking with GSO, since more interrupts were sent and hence a greater chance of one getting through to the Guest! Note2: (Almost) Closing the same loophole for iret doesn't have any measurable effect, so I'm leaving that patch for the moment. Before: 1GB tcpblast Guest->Host: 30.7 seconds 1GB tcpblast Guest->Host (no GSO): 76.0 seconds After: 1GB tcpblast Guest->Host: 6.8 seconds 1GB tcpblast Guest->Host (no GSO): 27.8 seconds Signed-off-by: Rusty Russell --- include/linux/lguest.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/lguest.h b/include/linux/lguest.h index 175e63f4a8c0..7bc1440fc473 100644 --- a/include/linux/lguest.h +++ b/include/linux/lguest.h @@ -30,6 +30,10 @@ struct lguest_data /* Wallclock time set by the Host. */ struct timespec time; + /* Interrupt pending set by the Host. The Guest should do a hypercall + * if it re-enables interrupts and sees this set (to X86_EFLAGS_IF). */ + int irq_pending; + /* Async hypercall ring. Instead of directly making hypercalls, we can * place them in here for processing the next time the Host wants. * This batching can be quite efficient. */ -- cgit v1.2.3 From df60aeef4f4fe0645d9a195a7689005520422de5 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 12 Jun 2009 22:27:09 -0600 Subject: lguest: use eventfds for device notification Currently, when a Guest wants to perform I/O it calls LHCALL_NOTIFY with an address: the main Launcher process returns with this address, and figures out what device to run. A far nicer model is to let processes bind an eventfd to an address: if we find one, we simply signal the eventfd. Signed-off-by: Rusty Russell Cc: Davide Libenzi --- include/linux/lguest_launcher.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/lguest_launcher.h b/include/linux/lguest_launcher.h index a53407a4165c..9de964b90586 100644 --- a/include/linux/lguest_launcher.h +++ b/include/linux/lguest_launcher.h @@ -58,6 +58,7 @@ enum lguest_req LHREQ_GETDMA, /* No longer used */ LHREQ_IRQ, /* + irq */ LHREQ_BREAK, /* + on/off flag (on blocks until someone does off) */ + LHREQ_EVENTFD, /* + address, fd. */ }; /* The alignment to use between consumer and producer parts of vring. -- cgit v1.2.3 From 5dac051bc6030963181b69faddd9e0ad04f85fa8 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 12 Jun 2009 22:27:10 -0600 Subject: lguest: remove obsolete LHREQ_BREAK call We no longer need an efficient mechanism to force the Guest back into host userspace, as each device is serviced without bothering the main Guest process (aka. the Launcher). Signed-off-by: Rusty Russell --- include/linux/lguest_launcher.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/lguest_launcher.h b/include/linux/lguest_launcher.h index 9de964b90586..bfefbdf7498a 100644 --- a/include/linux/lguest_launcher.h +++ b/include/linux/lguest_launcher.h @@ -57,7 +57,7 @@ enum lguest_req LHREQ_INITIALIZE, /* + base, pfnlimit, start */ LHREQ_GETDMA, /* No longer used */ LHREQ_IRQ, /* + irq */ - LHREQ_BREAK, /* + on/off flag (on blocks until someone does off) */ + LHREQ_BREAK, /* No longer used */ LHREQ_EVENTFD, /* + address, fd. */ }; -- cgit v1.2.3 From 7e85ee0c1d15ca5f8bff0f514f158eba1742dd87 Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Fri, 12 Jun 2009 14:03:06 +0300 Subject: slab,slub: don't enable interrupts during early boot As explained by Benjamin Herrenschmidt: Oh and btw, your patch alone doesn't fix powerpc, because it's missing a whole bunch of GFP_KERNEL's in the arch code... You would have to grep the entire kernel for things that check slab_is_available() and even then you'll be missing some. For example, slab_is_available() didn't always exist, and so in the early days on powerpc, we used a mem_init_done global that is set form mem_init() (not perfect but works in practice). And we still have code using that to do the test. Therefore, mask out __GFP_WAIT, __GFP_IO, and __GFP_FS in the slab allocators in early boot code to avoid enabling interrupts. Signed-off-by: Pekka Enberg --- include/linux/gfp.h | 3 +++ include/linux/slab.h | 2 ++ include/linux/slob_def.h | 5 +++++ include/linux/slub_def.h | 2 ++ 4 files changed, 12 insertions(+) (limited to 'include/linux') diff --git a/include/linux/gfp.h b/include/linux/gfp.h index 0bbc15f54536..3760e7c5de02 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -85,6 +85,9 @@ struct vm_area_struct; __GFP_NOWARN|__GFP_REPEAT|__GFP_NOFAIL|\ __GFP_NORETRY|__GFP_NOMEMALLOC) +/* Control slab gfp mask during early boot */ +#define SLAB_GFP_BOOT_MASK __GFP_BITS_MASK & ~(__GFP_WAIT|__GFP_IO|__GFP_FS) + /* Control allocation constraints */ #define GFP_CONSTRAINT_MASK (__GFP_HARDWALL|__GFP_THISNODE) diff --git a/include/linux/slab.h b/include/linux/slab.h index 48803064cedf..219b8fb4651d 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -319,4 +319,6 @@ static inline void *kzalloc_node(size_t size, gfp_t flags, int node) return kmalloc_node(size, flags | __GFP_ZERO, node); } +void __init kmem_cache_init_late(void); + #endif /* _LINUX_SLAB_H */ diff --git a/include/linux/slob_def.h b/include/linux/slob_def.h index 0ec00b39d006..bb5368df4be8 100644 --- a/include/linux/slob_def.h +++ b/include/linux/slob_def.h @@ -34,4 +34,9 @@ static __always_inline void *__kmalloc(size_t size, gfp_t flags) return kmalloc(size, flags); } +static inline void kmem_cache_init_late(void) +{ + /* Nothing to do */ +} + #endif /* __LINUX_SLOB_DEF_H */ diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index be5d40c43bd2..4dcbc2c71491 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -302,4 +302,6 @@ static __always_inline void *kmalloc_node(size_t size, gfp_t flags, int node) } #endif +void __init kmem_cache_init_late(void); + #endif /* _LINUX_SLUB_DEF_H */ -- cgit v1.2.3 From 7ea2ac9b6632038377cb488c7d1cb60b88164d4d Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Tue, 14 Apr 2009 23:14:17 -0300 Subject: Trivial: fix typo s/balence/balance/ Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Jiri Kosina --- include/linux/ultrasound.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ultrasound.h b/include/linux/ultrasound.h index 6b7703e75cec..71339dc531c5 100644 --- a/include/linux/ultrasound.h +++ b/include/linux/ultrasound.h @@ -34,7 +34,7 @@ * _GUS_VOICEOFF - Stops voice (no parameters) * _GUS_VOICEFADE - Stops the voice smoothly. * _GUS_VOICEMODE - Alters the voice mode, don't start or stop voice (P1=voice mode) - * _GUS_VOICEBALA - Sets voice balence (P1, 0=left, 7=middle and 15=right, default 7) + * _GUS_VOICEBALA - Sets voice balance (P1, 0=left, 7=middle and 15=right, default 7) * _GUS_VOICEFREQ - Sets voice (sample) playback frequency (P1=Hz) * _GUS_VOICEVOL - Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off) * _GUS_VOICEVOL2 - Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off) -- cgit v1.2.3 From e39a71ef80877f4e30d808af9acceec80f4d2f7c Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Fri, 15 May 2009 00:53:26 +0200 Subject: PM: Rename device_power_down/up() Rename the functions performing "_noirq" dev_pm_ops operations from device_power_down() and device_power_up() to device_suspend_noirq() and device_resume_noirq(). The new function names are chosen to show that the functions are responsible for calling the _noirq() versions to finalize the suspend/resume operation. The current function names do not perform power down/up anymore so the names may be misleading. Global function renames: - device_power_down() -> device_suspend_noirq() - device_power_up() -> device_resume_noirq() Static function renames: - suspend_device_noirq() -> __device_suspend_noirq() - resume_device_noirq() -> __device_resume_noirq() Signed-off-by: Magnus Damm Acked-by: Greg Kroah-Hartman Acked-by: Len Brown Signed-off-by: Rafael J. Wysocki --- include/linux/pm.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/pm.h b/include/linux/pm.h index 1d4e2d289821..2170252074f3 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -382,12 +382,12 @@ struct dev_pm_info { #ifdef CONFIG_PM_SLEEP extern void device_pm_lock(void); extern int sysdev_resume(void); -extern void device_power_up(pm_message_t state); +extern void device_resume_noirq(pm_message_t state); extern void device_resume(pm_message_t state); extern void device_pm_unlock(void); extern int sysdev_suspend(pm_message_t state); -extern int device_power_down(pm_message_t state); +extern int device_suspend_noirq(pm_message_t state); extern int device_suspend(pm_message_t state); extern int device_prepare_suspend(pm_message_t state); -- cgit v1.2.3 From d161630297a20802d01c55847bfcba85d2118a9f Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Sun, 24 May 2009 22:05:42 +0200 Subject: PM core: rename suspend and resume functions This patch (as1241) renames a bunch of functions in the PM core. Rather than go through a boring list of name changes, suffice it to say that in the end we have a bunch of pairs of functions: device_resume_noirq dpm_resume_noirq device_resume dpm_resume device_complete dpm_complete device_suspend_noirq dpm_suspend_noirq device_suspend dpm_suspend device_prepare dpm_prepare in which device_X does the X operation on a single device and dpm_X invokes device_X for all devices in the dpm_list. In addition, the old dpm_power_up and device_resume_noirq have been combined into a single function (dpm_resume_noirq). Lastly, dpm_suspend_start and dpm_resume_end are the renamed versions of the former top-level device_suspend and device_resume routines. Signed-off-by: Alan Stern Acked-by: Magnus Damm Signed-off-by: Rafael J. Wysocki --- include/linux/pm.h | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/pm.h b/include/linux/pm.h index 2170252074f3..b3f74764a586 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -382,14 +382,13 @@ struct dev_pm_info { #ifdef CONFIG_PM_SLEEP extern void device_pm_lock(void); extern int sysdev_resume(void); -extern void device_resume_noirq(pm_message_t state); -extern void device_resume(pm_message_t state); +extern void dpm_resume_noirq(pm_message_t state); +extern void dpm_resume_end(pm_message_t state); extern void device_pm_unlock(void); extern int sysdev_suspend(pm_message_t state); -extern int device_suspend_noirq(pm_message_t state); -extern int device_suspend(pm_message_t state); -extern int device_prepare_suspend(pm_message_t state); +extern int dpm_suspend_noirq(pm_message_t state); +extern int dpm_suspend_start(pm_message_t state); extern void __suspend_report_result(const char *function, void *fn, int ret); @@ -403,7 +402,7 @@ extern void __suspend_report_result(const char *function, void *fn, int ret); #define device_pm_lock() do {} while (0) #define device_pm_unlock() do {} while (0) -static inline int device_suspend(pm_message_t state) +static inline int dpm_suspend_start(pm_message_t state) { return 0; } -- cgit v1.2.3 From e240b58c79144708530138e05f17c6d0d8d744a8 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Sun, 24 May 2009 22:05:54 +0200 Subject: PM: Remove bus_type suspend_late()/resume_early() V2 Remove the ->suspend_late() and ->resume_early() callbacks from struct bus_type V2. These callbacks are legacy stuff at this point and since there seem to be no in-tree users we may as well remove them. New users should use dev_pm_ops. Signed-off-by: Magnus Damm Acked-by: Pavel Machek Acked-by: Greg Kroah-Hartman Signed-off-by: Rafael J. Wysocki --- include/linux/device.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/device.h b/include/linux/device.h index 5d5c197bad45..84d79cde9f7d 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -62,8 +62,6 @@ struct bus_type { void (*shutdown)(struct device *dev); int (*suspend)(struct device *dev, pm_message_t state); - int (*suspend_late)(struct device *dev, pm_message_t state); - int (*resume_early)(struct device *dev); int (*resume)(struct device *dev); struct dev_pm_ops *pm; -- cgit v1.2.3 From 00725787511e20dbd1fdc1fb233606120ae5c8cf Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 4 Jun 2009 22:13:25 +0200 Subject: PM: Remove device_type suspend()/resume() This patch removes the legacy callbacks ->suspend() and ->resume() from struct device_type. These callbacks seem unused, and new code should instead make use of struct dev_pm_ops. Signed-off-by: Magnus Damm Acked-by: Greg Kroah-Hartman Signed-off-by: Rafael J. Wysocki --- include/linux/device.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/device.h b/include/linux/device.h index 84d79cde9f7d..a4a7b10aaa48 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -289,9 +289,6 @@ struct device_type { int (*uevent)(struct device *dev, struct kobj_uevent_env *env); void (*release)(struct device *dev); - int (*suspend)(struct device *dev, pm_message_t state); - int (*resume)(struct device *dev); - struct dev_pm_ops *pm; }; -- cgit v1.2.3 From fce2b111fae9151a53dabb36513b398d03337a19 Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Wed, 10 Jun 2009 01:28:19 +0200 Subject: PM/Hibernate: Move NVS routines into a seperate file (v2). The *_nvs_* routines in swsusp.c make use of the io*map() functions, which are only provided for HAS_IOMEM, thus breaking compilation if HAS_IOMEM is not set. Fix this by moving the *_nvs_* routines into hibernate_nvs.c, which is only compiled if HAS_IOMEM is set. [rjw: Change the name of the new file to hibernate_nvs.c, add the license line to the header comment.] Signed-off-by: Cornelia Huck Acked-by: Pavel Machek Signed-off-by: Rafael J. Wysocki --- include/linux/suspend.h | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/suspend.h b/include/linux/suspend.h index 795032edfc46..cd15df6c63cd 100644 --- a/include/linux/suspend.h +++ b/include/linux/suspend.h @@ -245,11 +245,6 @@ extern unsigned long get_safe_page(gfp_t gfp_mask); extern void hibernation_set_ops(struct platform_hibernation_ops *ops); extern int hibernate(void); -extern int hibernate_nvs_register(unsigned long start, unsigned long size); -extern int hibernate_nvs_alloc(void); -extern void hibernate_nvs_free(void); -extern void hibernate_nvs_save(void); -extern void hibernate_nvs_restore(void); extern bool system_entering_hibernation(void); #else /* CONFIG_HIBERNATION */ static inline int swsusp_page_is_forbidden(struct page *p) { return 0; } @@ -258,6 +253,16 @@ static inline void swsusp_unset_page_free(struct page *p) {} static inline void hibernation_set_ops(struct platform_hibernation_ops *ops) {} static inline int hibernate(void) { return -ENOSYS; } +static inline bool system_entering_hibernation(void) { return false; } +#endif /* CONFIG_HIBERNATION */ + +#ifdef CONFIG_HIBERNATION_NVS +extern int hibernate_nvs_register(unsigned long start, unsigned long size); +extern int hibernate_nvs_alloc(void); +extern void hibernate_nvs_free(void); +extern void hibernate_nvs_save(void); +extern void hibernate_nvs_restore(void); +#else /* CONFIG_HIBERNATION_NVS */ static inline int hibernate_nvs_register(unsigned long a, unsigned long b) { return 0; @@ -266,8 +271,7 @@ static inline int hibernate_nvs_alloc(void) { return 0; } static inline void hibernate_nvs_free(void) {} static inline void hibernate_nvs_save(void) {} static inline void hibernate_nvs_restore(void) {} -static inline bool system_entering_hibernation(void) { return false; } -#endif /* CONFIG_HIBERNATION */ +#endif /* CONFIG_HIBERNATION_NVS */ #ifdef CONFIG_PM_SLEEP void save_processor_state(void); -- cgit v1.2.3 From 5818a6e2519b34cd6d0220d89f5729ab2725e1bf Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 11 Jun 2009 21:59:21 +0200 Subject: PM: Add empty suspend/resume device irq functions git commit 0a0c5168 "PM: Introduce functions for suspending and resuming device interrupts" introduced some helper functions. However these functions are only available for architectures which support GENERIC_HARDIRQS. Other architectures will see this build error: drivers/built-in.o: In function `sysdev_suspend': (.text+0x15138): undefined reference to `check_wakeup_irqs' drivers/built-in.o: In function `device_power_up': (.text+0x1cb66): undefined reference to `resume_device_irqs' drivers/built-in.o: In function `device_power_down': (.text+0x1cb92): undefined reference to `suspend_device_irqs' To fix this add some empty inline functions for !GENERIC_HARDIRQS. Signed-off-by: Heiko Carstens Signed-off-by: Rafael J. Wysocki --- include/linux/interrupt.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index ff374ceface0..c41e812e9d5e 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -183,6 +183,7 @@ extern void disable_irq(unsigned int irq); extern void enable_irq(unsigned int irq); /* The following three functions are for the core kernel use only. */ +#ifdef CONFIG_GENERIC_HARDIRQS extern void suspend_device_irqs(void); extern void resume_device_irqs(void); #ifdef CONFIG_PM_SLEEP @@ -190,6 +191,11 @@ extern int check_wakeup_irqs(void); #else static inline int check_wakeup_irqs(void) { return 0; } #endif +#else +static inline void suspend_device_irqs(void) { }; +static inline void resume_device_irqs(void) { }; +static inline int check_wakeup_irqs(void) { return 0; } +#endif #if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS) -- cgit v1.2.3 From dd14be4c274fc484eccace03ae9726e516630331 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Richard=20R=C3=B6jfors?= Date: Fri, 5 Jun 2009 15:40:32 +0200 Subject: i2c-ocores: Can add I2C devices to the bus MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There is sometimes a need for the ocores driver to add devices to the bus when installed. i2c_register_board_info can not always be used, because the I2C devices are not known at an early state, they could for instance be connected on a I2C bus on a PCI device which has the Open Cores IP. i2c_new_device can not be used in all cases either since the resulting bus nummer might be unknown. The solution is the pass a list of I2C devices in the platform data to the Open Cores driver. This is useful for MFD drivers. Signed-off-by: Richard Röjfors Signed-off-by: Ben Dooks --- include/linux/i2c-ocores.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/i2c-ocores.h b/include/linux/i2c-ocores.h index 8ed591b0887e..4d5e57ff6614 100644 --- a/include/linux/i2c-ocores.h +++ b/include/linux/i2c-ocores.h @@ -14,6 +14,8 @@ struct ocores_i2c_platform_data { u32 regstep; /* distance between registers */ u32 clock_khz; /* input clock in kHz */ + u8 num_devices; /* number of devices in the devices list */ + struct i2c_board_info const *devices; /* devices connected to the bus */ }; #endif /* _LINUX_I2C_OCORES_H */ -- cgit v1.2.3 From cd6d95d8449b7c9f415f26041e9ae173d387b6bd Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 12 Jun 2009 11:29:27 +0200 Subject: clocksource: prevent selection of low resolution clocksourse also for nohz=on commit 3f68535adad (clocksource: sanity check sysfs clocksource changes) prevents selection of non high resolution capable clocksources when high resolution mode is active, but did not take into account that the same rules apply for highres=off nohz=on. Check the tick device mode instead of hrtimer_hres_active() to verify whether the system needs to be protected from a switch to jiffies or other non highres capable clock sources. Reported-by: Luming Yu Signed-off-by: Thomas Gleixner --- include/linux/hrtimer.h | 2 +- include/linux/tick.h | 3 +++ 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index 58021b0c396d..0d2f7c8a33d6 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -305,7 +305,7 @@ static inline int hrtimer_is_hres_active(struct hrtimer *timer) extern ktime_t ktime_get(void); extern ktime_t ktime_get_real(void); -extern int hrtimer_hres_active(void); + DECLARE_PER_CPU(struct tick_device, tick_cpu_device); diff --git a/include/linux/tick.h b/include/linux/tick.h index 469b82d88b3b..0482229c07db 100644 --- a/include/linux/tick.h +++ b/include/linux/tick.h @@ -97,10 +97,12 @@ extern void tick_clock_notify(void); extern int tick_check_oneshot_change(int allow_nohz); extern struct tick_sched *tick_get_tick_sched(int cpu); extern void tick_check_idle(int cpu); +extern int tick_oneshot_mode_active(void); # else static inline void tick_clock_notify(void) { } static inline int tick_check_oneshot_change(int allow_nohz) { return 0; } static inline void tick_check_idle(int cpu) { } +static inline int tick_oneshot_mode_active(void) { return 0; } # endif #else /* CONFIG_GENERIC_CLOCKEVENTS */ @@ -109,6 +111,7 @@ static inline void tick_cancel_sched_timer(int cpu) { } static inline void tick_clock_notify(void) { } static inline int tick_check_oneshot_change(int allow_nohz) { return 0; } static inline void tick_check_idle(int cpu) { } +static inline int tick_oneshot_mode_active(void) { return 0; } #endif /* !CONFIG_GENERIC_CLOCKEVENTS */ # ifdef CONFIG_NO_HZ -- cgit v1.2.3 From d219dce76c64f2c883dad0537fa09a56d5ff0a10 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Sat, 13 Jun 2009 12:28:57 +0200 Subject: list_nulls: add hlist_nulls_add_head and hlist_nulls_del This patch adds the hlist_nulls_add_head() function which is based on hlist_nulls_add_head_rcu() but without the use of rcu_assign_pointer(). It also adds hlist_nulls_del which is exactly the same like hlist_nulls_del_rcu(). Signed-off-by: Pablo Neira Ayuso Acked-by: Eric Dumazet Signed-off-by: Patrick McHardy --- include/linux/list_nulls.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'include/linux') diff --git a/include/linux/list_nulls.h b/include/linux/list_nulls.h index 93150ecf3ea4..5d10ae364b5e 100644 --- a/include/linux/list_nulls.h +++ b/include/linux/list_nulls.h @@ -56,6 +56,18 @@ static inline int hlist_nulls_empty(const struct hlist_nulls_head *h) return is_a_nulls(h->first); } +static inline void hlist_nulls_add_head(struct hlist_nulls_node *n, + struct hlist_nulls_head *h) +{ + struct hlist_nulls_node *first = h->first; + + n->next = first; + n->pprev = &h->first; + h->first = n; + if (!is_a_nulls(first)) + first->pprev = &n->next; +} + static inline void __hlist_nulls_del(struct hlist_nulls_node *n) { struct hlist_nulls_node *next = n->next; @@ -65,6 +77,12 @@ static inline void __hlist_nulls_del(struct hlist_nulls_node *n) next->pprev = pprev; } +static inline void hlist_nulls_del(struct hlist_nulls_node *n) +{ + __hlist_nulls_del(n); + n->pprev = LIST_POISON2; +} + /** * hlist_nulls_for_each_entry - iterate over list of given type * @tpos: the type * to use as a loop cursor. -- cgit v1.2.3 From 5f5bac8272be791b67c7b7b411e7c8c5847e598a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Micha=C5=82=20Miros=C5=82aw?= Date: Fri, 22 May 2009 20:33:59 +0200 Subject: mmc: Driver for CB710/720 memory card reader (MMC part) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The code is divided in two parts. There is a virtual 'bus' driver that handles PCI device and registers three new devices one per card reader type. The other driver handles SD/MMC part of the reader. Signed-off-by: Michał Mirosław Signed-off-by: Pierre Ossman --- include/linux/cb710.h | 238 ++++++++++++++++++++++++++++++++++++++++++++++++ include/linux/pci_ids.h | 1 + 2 files changed, 239 insertions(+) create mode 100644 include/linux/cb710.h (limited to 'include/linux') diff --git a/include/linux/cb710.h b/include/linux/cb710.h new file mode 100644 index 000000000000..c3819e1ce1c6 --- /dev/null +++ b/include/linux/cb710.h @@ -0,0 +1,238 @@ +/* + * cb710/cb710.h + * + * Copyright by Michał Mirosław, 2008-2009 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef LINUX_CB710_DRIVER_H +#define LINUX_CB710_DRIVER_H + +#ifdef CONFIG_CB710_DEBUG +#define DEBUG +#endif + +/* verify assumptions on platform_device framework */ +#define CONFIG_CB710_DEBUG_ASSUMPTIONS + +#include +#include +#include +#include +#include +#include + +struct cb710_slot; + +typedef int (*cb710_irq_handler_t)(struct cb710_slot *); + +/* per-virtual-slot structure */ +struct cb710_slot { + struct platform_device pdev; + void __iomem *iobase; + cb710_irq_handler_t irq_handler; +}; + +/* per-device structure */ +struct cb710_chip { + struct pci_dev *pdev; + void __iomem *iobase; + unsigned platform_id; +#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS + atomic_t slot_refs_count; +#endif + unsigned slot_mask; + unsigned slots; + spinlock_t irq_lock; + struct cb710_slot slot[0]; +}; + +/* NOTE: cb710_chip.slots is modified only during device init/exit and + * they are all serialized wrt themselves */ + +/* cb710_chip.slot_mask values */ +#define CB710_SLOT_MMC 1 +#define CB710_SLOT_MS 2 +#define CB710_SLOT_SM 4 + +/* slot port accessors - so the logic is more clear in the code */ +#define CB710_PORT_ACCESSORS(t) \ +static inline void cb710_write_port_##t(struct cb710_slot *slot, \ + unsigned port, u##t value) \ +{ \ + iowrite##t(value, slot->iobase + port); \ +} \ + \ +static inline u##t cb710_read_port_##t(struct cb710_slot *slot, \ + unsigned port) \ +{ \ + return ioread##t(slot->iobase + port); \ +} \ + \ +static inline void cb710_modify_port_##t(struct cb710_slot *slot, \ + unsigned port, u##t set, u##t clear) \ +{ \ + iowrite##t( \ + (ioread##t(slot->iobase + port) & ~clear)|set, \ + slot->iobase + port); \ +} + +CB710_PORT_ACCESSORS(8) +CB710_PORT_ACCESSORS(16) +CB710_PORT_ACCESSORS(32) + +void cb710_pci_update_config_reg(struct pci_dev *pdev, + int reg, uint32_t and, uint32_t xor); +void cb710_set_irq_handler(struct cb710_slot *slot, + cb710_irq_handler_t handler); + +/* some device struct walking */ + +static inline struct cb710_slot *cb710_pdev_to_slot( + struct platform_device *pdev) +{ + return container_of(pdev, struct cb710_slot, pdev); +} + +static inline struct cb710_chip *cb710_slot_to_chip(struct cb710_slot *slot) +{ + return dev_get_drvdata(slot->pdev.dev.parent); +} + +static inline struct device *cb710_slot_dev(struct cb710_slot *slot) +{ + return &slot->pdev.dev; +} + +static inline struct device *cb710_chip_dev(struct cb710_chip *chip) +{ + return &chip->pdev->dev; +} + +/* debugging aids */ + +#ifdef CONFIG_CB710_DEBUG +void cb710_dump_regs(struct cb710_chip *chip, unsigned dump); +#else +#define cb710_dump_regs(c, d) do {} while (0) +#endif + +#define CB710_DUMP_REGS_MMC 0x0F +#define CB710_DUMP_REGS_MS 0x30 +#define CB710_DUMP_REGS_SM 0xC0 +#define CB710_DUMP_REGS_ALL 0xFF +#define CB710_DUMP_REGS_MASK 0xFF + +#define CB710_DUMP_ACCESS_8 0x100 +#define CB710_DUMP_ACCESS_16 0x200 +#define CB710_DUMP_ACCESS_32 0x400 +#define CB710_DUMP_ACCESS_ALL 0x700 +#define CB710_DUMP_ACCESS_MASK 0x700 + +#endif /* LINUX_CB710_DRIVER_H */ +/* + * cb710/sgbuf2.h + * + * Copyright by Michał Mirosław, 2008-2009 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef LINUX_CB710_SG_H +#define LINUX_CB710_SG_H + +#include +#include + +/** + * cb710_sg_miter_stop_writing - stop mapping iteration after writing + * @miter: sg mapping iter to be stopped + * + * Description: + * Stops mapping iterator @miter. @miter should have been started + * started using sg_miter_start(). A stopped iteration can be + * resumed by calling sg_miter_next() on it. This is useful when + * resources (kmap) need to be released during iteration. + * + * This is a convenience wrapper that will be optimized out for arches + * that don't need flush_kernel_dcache_page(). + * + * Context: + * IRQ disabled if the SG_MITER_ATOMIC is set. Don't care otherwise. + */ +static inline void cb710_sg_miter_stop_writing(struct sg_mapping_iter *miter) +{ + if (miter->page) + flush_kernel_dcache_page(miter->page); + sg_miter_stop(miter); +} + +/* + * 32-bit PIO mapping sg iterator + * + * Hides scatterlist access issues - fragment boundaries, alignment, page + * mapping - for drivers using 32-bit-word-at-a-time-PIO (ie. PCI devices + * without DMA support). + * + * Best-case reading (transfer from device): + * sg_miter_start(); + * cb710_sg_dwiter_write_from_io(); + * cb710_sg_miter_stop_writing(); + * + * Best-case writing (transfer to device): + * sg_miter_start(); + * cb710_sg_dwiter_read_to_io(); + * sg_miter_stop(); + */ + +uint32_t cb710_sg_dwiter_read_next_block(struct sg_mapping_iter *miter); +void cb710_sg_dwiter_write_next_block(struct sg_mapping_iter *miter, uint32_t data); + +/** + * cb710_sg_dwiter_write_from_io - transfer data to mapped buffer from 32-bit IO port + * @miter: sg mapping iter + * @port: PIO port - IO or MMIO address + * @count: number of 32-bit words to transfer + * + * Description: + * Reads @count 32-bit words from register @port and stores it in + * buffer iterated by @miter. Data that would overflow the buffer + * is silently ignored. Iterator is advanced by 4*@count bytes + * or to the buffer's end whichever is closer. + * + * Context: + * IRQ disabled if the SG_MITER_ATOMIC is set. Don't care otherwise. + */ +static inline void cb710_sg_dwiter_write_from_io(struct sg_mapping_iter *miter, + void __iomem *port, size_t count) +{ + while (count-- > 0) + cb710_sg_dwiter_write_next_block(miter, ioread32(port)); +} + +/** + * cb710_sg_dwiter_read_to_io - transfer data to 32-bit IO port from mapped buffer + * @miter: sg mapping iter + * @port: PIO port - IO or MMIO address + * @count: number of 32-bit words to transfer + * + * Description: + * Writes @count 32-bit words to register @port from buffer iterated + * through @miter. If buffer ends before @count words are written + * missing data is replaced by zeroes. @miter is advanced by 4*@count + * bytes or to the buffer's end whichever is closer. + * + * Context: + * IRQ disabled if the SG_MITER_ATOMIC is set. Don't care otherwise. + */ +static inline void cb710_sg_dwiter_read_to_io(struct sg_mapping_iter *miter, + void __iomem *port, size_t count) +{ + while (count-- > 0) + iowrite32(cb710_sg_dwiter_read_next_block(miter), port); +} + +#endif /* LINUX_CB710_SG_H */ diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 19f8e6d1a4d2..9f36e1cdbf01 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2127,6 +2127,7 @@ #define PCI_VENDOR_ID_MAINPINE 0x1522 #define PCI_DEVICE_ID_MAINPINE_PBRIDGE 0x0100 #define PCI_VENDOR_ID_ENE 0x1524 +#define PCI_DEVICE_ID_ENE_CB710_FLASH 0x0510 #define PCI_DEVICE_ID_ENE_CB712_SD 0x0550 #define PCI_DEVICE_ID_ENE_CB712_SD_2 0x0551 #define PCI_DEVICE_ID_ENE_CB714_SD 0x0750 -- cgit v1.2.3 From 9bf69a26ad9ccdc49469402275204271b3336ab6 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Thu, 4 Jun 2009 08:00:40 +0200 Subject: cb710: handle DEBUG define in Makefile Signed-off-by: Pierre Ossman --- include/linux/cb710.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/cb710.h b/include/linux/cb710.h index c3819e1ce1c6..a09213b52616 100644 --- a/include/linux/cb710.h +++ b/include/linux/cb710.h @@ -10,10 +10,6 @@ #ifndef LINUX_CB710_DRIVER_H #define LINUX_CB710_DRIVER_H -#ifdef CONFIG_CB710_DEBUG -#define DEBUG -#endif - /* verify assumptions on platform_device framework */ #define CONFIG_CB710_DEBUG_ASSUMPTIONS -- cgit v1.2.3 From c54f6bc67a4398243682f7438a2129906e127d21 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Micha=C5=82=20Miros=C5=82aw?= Date: Sat, 13 Jun 2009 12:37:59 +0200 Subject: cb710: more cleanup for the DEBUG case. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Michał Mirosław Signed-off-by: Pierre Ossman --- include/linux/cb710.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/cb710.h b/include/linux/cb710.h index a09213b52616..63bc9a4d2926 100644 --- a/include/linux/cb710.h +++ b/include/linux/cb710.h @@ -10,9 +10,6 @@ #ifndef LINUX_CB710_DRIVER_H #define LINUX_CB710_DRIVER_H -/* verify assumptions on platform_device framework */ -#define CONFIG_CB710_DEBUG_ASSUMPTIONS - #include #include #include -- cgit v1.2.3 From f0e46cc4971f6be96010d9248e0fc076b229d989 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Thu, 4 Jun 2009 20:12:31 +0200 Subject: MFD,mmc: tmio_mmc: make HCLK configurable The Toshiba parts all have a 24 MHz HCLK, but HTC ASIC3 has a 24.576 MHz HCLK and AMD Imageon w228x's HCLK is 80 MHz. With this patch, the MFD driver provides the HCLK frequency to tmio_mmc via mfd_cell->driver_data. Signed-off-by: Philipp Zabel Acked-by: Ian Molton Acked-by: Samuel Ortiz Signed-off-by: Pierre Ossman --- include/linux/mfd/tmio.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index 516d955ab8a1..c377118884e6 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -18,6 +18,13 @@ writew((val) >> 16, (addr) + 2); \ } while (0) +/* + * data for the MMC controller + */ +struct tmio_mmc_data { + unsigned int hclk; +}; + /* * data for the NAND controller */ -- cgit v1.2.3 From 7923f90fffa8746f6457d4eea2109fd3d6414189 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sun, 14 Jun 2009 22:10:41 +0200 Subject: vmlinux.lds.h update Updated after review by Tim Abbott. - Use HEAD_TEXT_SECTION - Drop use of section-names.h and delete file - Introduce EXIT_CALL Deleting section-names.h required a few simple updates of init.h Signed-off-by: Sam Ravnborg Cc: Tim Abbott --- include/linux/init.h | 4 +--- include/linux/section-names.h | 6 ------ 2 files changed, 1 insertion(+), 9 deletions(-) delete mode 100644 include/linux/section-names.h (limited to 'include/linux') diff --git a/include/linux/init.h b/include/linux/init.h index 9f70c9f25d4b..b2189803f19a 100644 --- a/include/linux/init.h +++ b/include/linux/init.h @@ -2,8 +2,6 @@ #define _LINUX_INIT_H #include -#include -#include /* These macros are used to mark some functions or * initialized data (doesn't apply to uninitialized data) @@ -101,7 +99,7 @@ #define __memexitconst __section(.memexit.rodata) /* For assembly routines */ -#define __HEAD .section __stringify(HEAD_TEXT_SECTION),"ax" +#define __HEAD .section ".head.text","ax" #define __INIT .section ".init.text","ax" #define __FINIT .previous diff --git a/include/linux/section-names.h b/include/linux/section-names.h deleted file mode 100644 index c956f4eb2adf..000000000000 --- a/include/linux/section-names.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __LINUX_SECTION_NAMES_H -#define __LINUX_SECTION_NAMES_H - -#define HEAD_TEXT_SECTION .head.text - -#endif /* !__LINUX_SECTION_NAMES_H */ -- cgit v1.2.3 From 5a7e3d1281bbc4404b250b4a18d3ecb07c77640c Mon Sep 17 00:00:00 2001 From: Samuel Thibault Date: Sat, 13 Jun 2009 14:52:33 +0200 Subject: keyboard: advertise KT_DEAD2 extended diacriticals In addition to KT_DEAD which has limited support for diacriticals, there is KT_DEAD2 that can support 256 criticals, so let's advertise it in . This lets userland know abut the drivers/char/keyboard.c function k_dead2, which supports more than the few trivial ones that k_dead supports. Signed-off-by: Samuel Thibault Signed-off-by: Linus Torvalds --- include/linux/keyboard.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/keyboard.h b/include/linux/keyboard.h index a3c984d780f0..33a63f62d57f 100644 --- a/include/linux/keyboard.h +++ b/include/linux/keyboard.h @@ -56,6 +56,7 @@ extern int unregister_keyboard_notifier(struct notifier_block *nb); #define KT_ASCII 9 #define KT_LOCK 10 #define KT_SLOCK 12 +#define KT_DEAD2 13 #define KT_BRL 14 #define K(t,v) (((t)<<8)|(v)) -- cgit v1.2.3 From 13685a1654b65357fb34066a98ef40445f7820fc Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 10 Jun 2009 04:38:40 +0000 Subject: block: Add bio_list_peek() Introduce bio_list_peek(), to obtain a pointer to the first bio on the bio_list without actually removing it from the list. This is needed when you want to serialize based on the list being empty or not. Signed-off-by: Geert Uytterhoeven Acked-by: Jens Axboe Signed-off-by: Benjamin Herrenschmidt --- include/linux/bio.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/bio.h b/include/linux/bio.h index 12737be58601..2a04eb54c0dd 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -590,6 +590,11 @@ static inline void bio_list_merge_head(struct bio_list *bl, bl->head = bl2->head; } +static inline struct bio *bio_list_peek(struct bio_list *bl) +{ + return bl->head; +} + static inline struct bio *bio_list_pop(struct bio_list *bl) { struct bio *bio = bl->head; -- cgit v1.2.3 From 55f4fa4e33e90c6b25b4c8ed038392a73b654fef Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Thu, 23 Apr 2009 20:10:43 +0200 Subject: Maxim 1586 regulator driver The Maxim 1586 regulator is a voltage regulator with 2 voltage outputs, specially suitable for Marvell PXA chips. One output is in the range of required VCC_CORE by the PXA27x chips, the other in the VCC_USIM required as well by PXA27x chips. The chip is controlled through the I2C bus. Signed-off-by: Robert Jarzmik Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/max1586.h | 52 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 include/linux/regulator/max1586.h (limited to 'include/linux') diff --git a/include/linux/regulator/max1586.h b/include/linux/regulator/max1586.h new file mode 100644 index 000000000000..2056973396b6 --- /dev/null +++ b/include/linux/regulator/max1586.h @@ -0,0 +1,52 @@ +/* + * max1586.h -- Voltage regulation for the Maxim 1586 + * + * Copyright (C) 2008 Robert Jarzmik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef REGULATOR_MAX1586 +#define REGULATOR_MAX1586 + +#include + +#define MAX1586_V3 0 +#define MAX1586_V6 1 + +/** + * max1586_subdev_data - regulator data + * @id: regulator Id (either MAX1586_V3 or MAX1586_V6) + * @name: regulator cute name (example for V3: "vcc_core") + * @platform_data: regulator init data (contraints, supplies, ...) + */ +struct max1586_subdev_data { + int id; + char *name; + struct regulator_init_data *platform_data; +}; + +/** + * max1586_platform_data - platform data for max1586 + * @num_subdevs: number of regultors used (may be 1 or 2) + * @subdevs: regulator used + * At most, there will be a regulator for V3 and one for V6 voltages. + */ +struct max1586_platform_data { + int num_subdevs; + struct max1586_subdev_data *subdevs; +}; + +#endif -- cgit v1.2.3 From 1d98cccf7f8b944ba4ea56d14bbb7c2eeee59bfe Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Sun, 26 Apr 2009 16:49:39 +0300 Subject: regulator: add userspace-consumer driver The userspace-consumer driver allows control of voltage and current regulator state from userspace. This is required for fine-grained power management of devices that are completely controller by userspace applications, e.g. a GPS transciever connected to a serial port. Signed-off-by: Mike Rapoport Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/userspace-consumer.h | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 include/linux/regulator/userspace-consumer.h (limited to 'include/linux') diff --git a/include/linux/regulator/userspace-consumer.h b/include/linux/regulator/userspace-consumer.h new file mode 100644 index 000000000000..b4554ce9d4bb --- /dev/null +++ b/include/linux/regulator/userspace-consumer.h @@ -0,0 +1,25 @@ +#ifndef __REGULATOR_PLATFORM_CONSUMER_H_ +#define __REGULATOR_PLATFORM_CONSUMER_H_ + +struct regulator_consumer_supply; + +/** + * struct regulator_userspace_consumer_data - line consumer + * initialisation data. + * + * @name: Name for the consumer line + * @num_supplies: Number of supplies feeding the line + * @supplies: Supplies configuration. + * @init_on: Set if the regulators supplying the line should be + * enabled during initialisation + */ +struct regulator_userspace_consumer_data { + const char *name; + + int num_supplies; + struct regulator_bulk_data *supplies; + + bool init_on; +}; + +#endif /* __REGULATOR_PLATFORM_CONSUMER_H_ */ -- cgit v1.2.3 From 0cbdf7bce5b98807b946d1a96956f30dcae24a50 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Tue, 19 May 2009 07:33:55 +0200 Subject: LP3971 PMIC regulator driver (updated and combined version) This patch adds regulator drivers for National Semiconductors LP3971 PMIC. This LP3971 PMIC controller has 3 DC/DC voltage converters and 5 low drop-out (LDO) regulators. LP3971 PMIC controller uses I2C interface. Reviewed-by: Kyungmin Park Signed-off-by: Marek Szyprowski Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/lp3971.h | 51 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) create mode 100644 include/linux/regulator/lp3971.h (limited to 'include/linux') diff --git a/include/linux/regulator/lp3971.h b/include/linux/regulator/lp3971.h new file mode 100644 index 000000000000..61401649fe7d --- /dev/null +++ b/include/linux/regulator/lp3971.h @@ -0,0 +1,51 @@ +/* + * National Semiconductors LP3971 PMIC chip client interface + * + * Copyright (C) 2009 Samsung Electronics + * Author: Marek Szyprowski + * + * Based on wm8400.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __LINUX_REGULATOR_LP3971_H +#define __LINUX_REGULATOR_LP3971_H + +#include + +#define LP3971_LDO1 0 +#define LP3971_LDO2 1 +#define LP3971_LDO3 2 +#define LP3971_LDO4 3 +#define LP3971_LDO5 4 + +#define LP3971_DCDC1 5 +#define LP3971_DCDC2 6 +#define LP3971_DCDC3 7 + +#define LP3971_NUM_REGULATORS 8 + +struct lp3971_regulator_subdev { + int id; + struct regulator_init_data *initdata; +}; + +struct lp3971_platform_data { + int num_regulators; + struct lp3971_regulator_subdev *regulators; +}; + +#endif -- cgit v1.2.3 From b110a8fb242bc34e4b7686252899ce0fca956e2c Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Thu, 28 May 2009 07:15:16 +0200 Subject: regulator/max1586: support increased V3 voltage range The V3 regulator can be configured with an external resistor connected to the feedback pin (R24 in the data sheet) to increase the voltage range. For example, hx4700 has R24 = 3.32 kOhm to achieve a maximum V3 voltage of 1.55 V which is needed for 624 MHz CPU frequency. Signed-off-by: Philipp Zabel Acked-by: Mark Brown Acked-by: Robert Jarzmik Signed-off-by: Liam Girdwood --- include/linux/regulator/max1586.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regulator/max1586.h b/include/linux/regulator/max1586.h index 2056973396b6..44563192bf16 100644 --- a/include/linux/regulator/max1586.h +++ b/include/linux/regulator/max1586.h @@ -26,6 +26,12 @@ #define MAX1586_V3 0 #define MAX1586_V6 1 +/* precalculated values for v3_gain */ +#define MAX1586_GAIN_NO_R24 1000000 /* 700000 .. 1475000 mV */ +#define MAX1586_GAIN_R24_3k32 1051098 /* 735768 .. 1550369 mV */ +#define MAX1586_GAIN_R24_5k11 1078648 /* 755053 .. 1591005 mV */ +#define MAX1586_GAIN_R24_7k5 1115432 /* 780802 .. 1645262 mV */ + /** * max1586_subdev_data - regulator data * @id: regulator Id (either MAX1586_V3 or MAX1586_V6) @@ -43,10 +49,15 @@ struct max1586_subdev_data { * @num_subdevs: number of regultors used (may be 1 or 2) * @subdevs: regulator used * At most, there will be a regulator for V3 and one for V6 voltages. + * @v3_gain: gain on the V3 voltage output multiplied by 1e6. + * This can be calculated as ((1 + R24/R25 + R24/185.5kOhm) * 1e6) + * for an external resistor configuration as described in the + * data sheet (R25=100kOhm). */ struct max1586_platform_data { int num_subdevs; struct max1586_subdev_data *subdevs; + int v3_gain; }; #endif -- cgit v1.2.3 From e475bba2fdee9c3dbfe25f026f8fb8de69508ad2 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Tue, 16 Jun 2009 08:23:52 +0200 Subject: block: Introduce helper to reset queue limits to default values DM reuses the request queue when swapping in a new device table Introduce blk_set_default_limits() which can be used to reset the the queue_limits prior to stacking devices. Signed-off-by: Martin K. Petersen Acked-by: Alasdair G Kergon Acked-by: Mike Snitzer Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 0b1a6cae9de1..8963d9149b5f 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -926,6 +926,7 @@ extern void blk_queue_alignment_offset(struct request_queue *q, unsigned int alignment); extern void blk_queue_io_min(struct request_queue *q, unsigned int min); extern void blk_queue_io_opt(struct request_queue *q, unsigned int opt); +extern void blk_set_default_limits(struct queue_limits *lim); extern int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, sector_t offset); extern void disk_stack_limits(struct gendisk *disk, struct block_device *bdev, -- cgit v1.2.3 From 5ced504b1bd1979378de35c56aa5d3d79fb5033f Mon Sep 17 00:00:00 2001 From: unsik Kim Date: Tue, 16 Jun 2009 08:40:20 +0200 Subject: mg_disk: seperate mg_disk.h again eec9462088a26c046d4db3100796a340a50890b8 fold mg_disk.h into mg_disk.c, but mg_disk platform driver needs private data for operation. This also make mg_disk.c as machine independent. Seperate only needed structure and defines to mg_disk.h Signed-off-by: unsik Kim Signed-off-by: Jens Axboe --- include/linux/mg_disk.h | 45 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) create mode 100644 include/linux/mg_disk.h (limited to 'include/linux') diff --git a/include/linux/mg_disk.h b/include/linux/mg_disk.h new file mode 100644 index 000000000000..e11f4d9f1c2e --- /dev/null +++ b/include/linux/mg_disk.h @@ -0,0 +1,45 @@ +/* + * include/linux/mg_disk.c + * + * Private data for mflash platform driver + * + * (c) 2008 mGine Co.,LTD + * (c) 2008 unsik Kim + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MG_DISK_H__ +#define __MG_DISK_H__ + +/* name for platform device */ +#define MG_DEV_NAME "mg_disk" + +/* names of GPIO resource */ +#define MG_RST_PIN "mg_rst" +/* except MG_BOOT_DEV, reset-out pin should be assigned */ +#define MG_RSTOUT_PIN "mg_rstout" + +/* device attribution */ +/* use mflash as boot device */ +#define MG_BOOT_DEV (1 << 0) +/* use mflash as storage device */ +#define MG_STORAGE_DEV (1 << 1) +/* same as MG_STORAGE_DEV, but bootloader already done reset sequence */ +#define MG_STORAGE_DEV_SKIP_RST (1 << 2) + +/* private driver data */ +struct mg_drv_data { + /* disk resource */ + u32 use_polling; + + /* device attribution */ + u32 dev_attr; + + /* internally used */ + void *host; +}; + +#endif -- cgit v1.2.3 From 5fd29d6ccbc98884569d6f3105aeca70858b3e0f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 16 Jun 2009 10:57:02 -0700 Subject: printk: clean up handling of log-levels and newlines It used to be that we would only look at the log-level in a printk() after explicit newlines, which can cause annoying problems when the previous printk() did not end with a '\n'. In that case, the log-level marker would be just printed out in the middle of the line, and be seen as just noise rather than change the logging level. This changes things to always look at the log-level in the first bytes of the printout. If a log level marker is found, it is always used as the log-level. Additionally, if no newline existed, one is added (unless the log-level is the explicit KERN_CONT marker, to explicitly show that it's a continuation of a previous line). Acked-by: Arjan van de Ven Signed-off-by: Linus Torvalds --- include/linux/kernel.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 883cd44ff765..066bb1eddfea 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -102,7 +102,7 @@ extern const char linux_proc_banner[]; * line that had no enclosing \n). Only to be used by core/arch code * during early bootup (a continued line is not SMP-safe otherwise). */ -#define KERN_CONT "" +#define KERN_CONT "" extern int console_printk[]; -- cgit v1.2.3 From e28d713704117bca0820c732210df6075b09f13b Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 16 Jun 2009 11:02:28 -0700 Subject: printk: Add KERN_DEFAULT printk log-level This adds a KERN_DEFAULT loglevel marker, for when you cannot decide which loglevel you want, and just want to keep an existing printk with the default loglevel. The difference between having KERN_DEFAULT and having no log-level marker at all is two-fold: - having the log-level marker will now force a new-line if the previous printout had not added one (perhaps because it forgot, but perhaps because it expected a continuation) - having a log-level marker is required if you are printing out a message that otherwise itself could perhaps otherwise be mistaken for a log-level. Signed-of-by: Linus Torvalds --- include/linux/kernel.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 066bb1eddfea..1b2e1747df1a 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -97,6 +97,8 @@ extern const char linux_proc_banner[]; #define KERN_INFO "<6>" /* informational */ #define KERN_DEBUG "<7>" /* debug-level messages */ +/* Use the default kernel loglevel */ +#define KERN_DEFAULT "" /* * Annotation for a "continued" line of log printout (only done after a * line that had no enclosing \n). Only to be used by core/arch code -- cgit v1.2.3