From 3a494e710367c0a233d86bcde9853781859fc008 Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Thu, 19 Jun 2014 18:34:36 -0700 Subject: hyperv: Add handler for RNDIS_STATUS_NETWORK_CHANGE event The RNDIS_STATUS_NETWORK_CHANGE event is received after the Hyper-V host sleep or hibernation. We refresh network at this time. MS-TFS: 135162 Signed-off-by: Haiyang Zhang Reviewed-by: K. Y. Srinivasan Signed-off-by: David S. Miller --- include/linux/rndis.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/rndis.h b/include/linux/rndis.h index 0c8dc7195cdb..93c0a64aefa6 100644 --- a/include/linux/rndis.h +++ b/include/linux/rndis.h @@ -65,6 +65,7 @@ #define RNDIS_STATUS_MEDIA_SPECIFIC_INDICATION 0x40010012 #define RNDIS_STATUS_WW_INDICATION RDIA_SPECIFIC_INDICATION #define RNDIS_STATUS_LINK_SPEED_CHANGE 0x40010013L +#define RNDIS_STATUS_NETWORK_CHANGE 0x40010018 #define RNDIS_STATUS_NOT_RESETTABLE 0x80010001 #define RNDIS_STATUS_SOFT_ERRORS 0x80010003 -- cgit v1.2.3 From 0da6bc8cc3417a5e452efb886ff2c61e72b743d6 Mon Sep 17 00:00:00 2001 From: Varka Bhadram Date: Fri, 20 Jun 2014 17:47:15 +0530 Subject: ieee802154: cc2520: adds driver for TI CC2520 radio This patch adds the driver support for the cc2520 radio. Driver support: - Tx and Rx of IEEE-802.15.4 packets - Energy Detection on channel - Setting the Channel for the radio. [b/w 11 - 26 channels] - Start and Stop the radio - h/w address filtering Signed-off-by: Varka Bhadram Signed-off-by: David S. Miller --- include/linux/spi/cc2520.h | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 include/linux/spi/cc2520.h (limited to 'include/linux') diff --git a/include/linux/spi/cc2520.h b/include/linux/spi/cc2520.h new file mode 100644 index 000000000000..85b8ee67e937 --- /dev/null +++ b/include/linux/spi/cc2520.h @@ -0,0 +1,26 @@ +/* Header file for cc2520 radio driver + * + * Copyright (C) 2014 Varka Bhadram + * Md.Jamal Mohiuddin + * P Sowjanya + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#ifndef __CC2520_H +#define __CC2520_H + +struct cc2520_platform_data { + int fifo; + int fifop; + int cca; + int sfd; + int reset; + int vreg; +}; + +#endif -- cgit v1.2.3 From c887f0d3a03283cb6fe2c32aae62229bebd3fa32 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Wed, 11 Jun 2014 17:18:25 +0300 Subject: mac80211: add API to request TDLS operation from userspace Write a mac80211 to the cfg80211 API for requesting a userspace TDLS operation. Define TDLS specific reason codes that can be used here. Signed-off-by: Arik Nemtsov Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 6bff13f74050..75d17e15da33 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1621,6 +1621,9 @@ enum ieee80211_reasoncode { WLAN_REASON_INVALID_RSN_IE_CAP = 22, WLAN_REASON_IEEE8021X_FAILED = 23, WLAN_REASON_CIPHER_SUITE_REJECTED = 24, + /* TDLS (802.11z) */ + WLAN_REASON_TDLS_TEARDOWN_UNREACHABLE = 25, + WLAN_REASON_TDLS_TEARDOWN_UNSPECIFIED = 26, /* 802.11e */ WLAN_REASON_DISASSOC_UNSPECIFIED_QOS = 32, WLAN_REASON_DISASSOC_QAP_NO_BANDWIDTH = 33, -- cgit v1.2.3 From 6d514b4e7737ad75a7e7e0a3f7dde45d46341691 Mon Sep 17 00:00:00 2001 From: George Spelvin Date: Mon, 23 Jun 2014 15:11:54 +0200 Subject: lib: crc32: Greatly shrink CRC combining code There's no need for a full 32x32 matrix, when rows before the last are just shifted copies of the rows after them. There's still room for improvement (especially on X86 processors with CRC32 and PCLMUL instructions), but this is a large step in the right direction [which is in particular useful for its current user, namely SCTP checksumming over multiple skb frags[] entries, i.e. in IPVS balancing when other CRC32 offloads are not available]. The internal primitive is now called crc32_generic_shift and takes one less argument; the XOR with crc2 is done in inline wrappers. Signed-off-by: George Spelvin Signed-off-by: Daniel Borkmann Signed-off-by: David S. Miller --- include/linux/crc32.h | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/crc32.h b/include/linux/crc32.h index 7d275c4fc011..edf34e876e40 100644 --- a/include/linux/crc32.h +++ b/include/linux/crc32.h @@ -29,7 +29,12 @@ extern u32 crc32_be(u32 crc, unsigned char const *p, size_t len); * with the same initializer as crc1, and crc2 seed was 0. See * also crc32_combine_test(). */ -extern u32 crc32_le_combine(u32 crc1, u32 crc2, size_t len2); +u32 __attribute_const__ crc32_le_shift(u32 crc, size_t len); + +static inline u32 crc32_le_combine(u32 crc1, u32 crc2, size_t len2) +{ + return crc32_le_shift(crc1, len2) ^ crc2; +} extern u32 __crc32c_le(u32 crc, unsigned char const *p, size_t len); @@ -51,7 +56,12 @@ extern u32 __crc32c_le(u32 crc, unsigned char const *p, size_t len); * seeded with the same initializer as crc1, and crc2 seed * was 0. See also crc32c_combine_test(). */ -extern u32 __crc32c_le_combine(u32 crc1, u32 crc2, size_t len2); +u32 __attribute_const__ __crc32c_le_shift(u32 crc, size_t len); + +static inline u32 __crc32c_le_combine(u32 crc1, u32 crc2, size_t len2) +{ + return __crc32c_le_shift(crc1, len2) ^ crc2; +} #define crc32(seed, data, length) crc32_le(seed, (unsigned char const *)(data), length) -- cgit v1.2.3 From d8f1c4778e957273c3b5b6e045d8d3af38484ca8 Mon Sep 17 00:00:00 2001 From: George Spelvin Date: Mon, 23 Jun 2014 15:11:56 +0200 Subject: lib: crc32: Add some additional __pure annotations In case they help the compiler. Signed-off-by: George Spelvin Signed-off-by: Daniel Borkmann Signed-off-by: David S. Miller --- include/linux/crc32.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/crc32.h b/include/linux/crc32.h index edf34e876e40..9e8a032c1788 100644 --- a/include/linux/crc32.h +++ b/include/linux/crc32.h @@ -8,8 +8,8 @@ #include #include -extern u32 crc32_le(u32 crc, unsigned char const *p, size_t len); -extern u32 crc32_be(u32 crc, unsigned char const *p, size_t len); +u32 __pure crc32_le(u32 crc, unsigned char const *p, size_t len); +u32 __pure crc32_be(u32 crc, unsigned char const *p, size_t len); /** * crc32_le_combine - Combine two crc32 check values into one. For two @@ -36,7 +36,7 @@ static inline u32 crc32_le_combine(u32 crc1, u32 crc2, size_t len2) return crc32_le_shift(crc1, len2) ^ crc2; } -extern u32 __crc32c_le(u32 crc, unsigned char const *p, size_t len); +u32 __pure __crc32c_le(u32 crc, unsigned char const *p, size_t len); /** * __crc32c_le_combine - Combine two crc32c check values into one. For two -- cgit v1.2.3 From a69f5edb8ba20c87c5f7c96ec40581f9f51f2910 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 24 Jun 2014 11:20:48 -0700 Subject: mac_pton: Use bool not int return Use bool instead of int as the return type. All uses are tested with !. Signed-off-by: Joe Perches Signed-off-by: David S. Miller --- include/linux/kernel.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 4c52907a6d8b..a9e2268ecccb 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -501,7 +501,7 @@ static inline char * __deprecated pack_hex_byte(char *buf, u8 byte) extern int hex_to_bin(char ch); extern int __must_check hex2bin(u8 *dst, const char *src, size_t count); -int mac_pton(const char *s, u8 *mac); +bool mac_pton(const char *s, u8 *mac); /* * General tracing related utility functions - trace_printk(), -- cgit v1.2.3 From 476eab8251641ea2ae4666ca8a1436ebc2b8e9c3 Mon Sep 17 00:00:00 2001 From: Octavian Purdila Date: Wed, 25 Jun 2014 17:09:52 +0300 Subject: net: remove inet6_reqsk_alloc Since pktops is only used for IPv6 only and opts is used for IPv4 only, we can move these fields into a union and this allows us to drop the inet6_reqsk_alloc function as after this change it becomes equivalent with inet_reqsk_alloc. This patch also fixes a kmemcheck issue in the IPv6 stack: the flags field was not annotated after a request_sock was allocated. Signed-off-by: Octavian Purdila Signed-off-by: David S. Miller --- include/linux/ipv6.h | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index 2faef339d8f2..c811300b0b0c 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -256,16 +256,6 @@ static inline struct ipv6_pinfo * inet6_sk(const struct sock *__sk) return inet_sk(__sk)->pinet6; } -static inline struct request_sock *inet6_reqsk_alloc(struct request_sock_ops *ops) -{ - struct request_sock *req = reqsk_alloc(ops); - - if (req) - inet_rsk(req)->pktopts = NULL; - - return req; -} - static inline struct raw6_sock *raw6_sk(const struct sock *sk) { return (struct raw6_sock *)sk; -- cgit v1.2.3 From 16bea70aa7302b6f3bf3502d5a0efb4ea2ce4712 Mon Sep 17 00:00:00 2001 From: Octavian Purdila Date: Wed, 25 Jun 2014 17:09:53 +0300 Subject: tcp: add init_req method to tcp_request_sock_ops Move the specific IPv4/IPv6 intializations to a new method in tcp_request_sock_ops in preparation for unifying tcp_v4_conn_request and tcp_v6_conn_request. Signed-off-by: Octavian Purdila Signed-off-by: David S. Miller --- include/linux/tcp.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/tcp.h b/include/linux/tcp.h index a0513210798f..fa5258f322e7 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -111,10 +111,7 @@ struct tcp_request_sock_ops; struct tcp_request_sock { struct inet_request_sock req; -#ifdef CONFIG_TCP_MD5SIG - /* Only used by TCP MD5 Signature so far. */ const struct tcp_request_sock_ops *af_specific; -#endif struct sock *listener; /* needed for TFO */ u32 rcv_isn; u32 snt_isn; -- cgit v1.2.3 From d93331965729850303f6111381c1a4a9e9b8ae5a Mon Sep 17 00:00:00 2001 From: Ben Greear Date: Wed, 25 Jun 2014 14:44:53 -0700 Subject: ipv6: Allow accepting RA from local IP addresses. This can be used in virtual networking applications, and may have other uses as well. The option is disabled by default. A specific use case is setting up virtual routers, bridges, and hosts on a single OS without the use of network namespaces or virtual machines. With proper use of ip rules, routing tables, veth interface pairs and/or other virtual interfaces, and applications that can bind to interfaces and/or IP addresses, it is possibly to create one or more virtual routers with multiple hosts attached. The host interfaces can act as IPv6 systems, with radvd running on the ports in the virtual routers. With the option provided in this patch enabled, those hosts can now properly obtain IPv6 addresses from the radvd. Signed-off-by: Ben Greear Signed-off-by: David S. Miller --- include/linux/ipv6.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index c811300b0b0c..b0f2452f1d58 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -39,6 +39,7 @@ struct ipv6_devconf { #endif __s32 proxy_ndp; __s32 accept_source_route; + __s32 accept_ra_from_local; #ifdef CONFIG_IPV6_OPTIMISTIC_DAD __s32 optimistic_dad; #endif -- cgit v1.2.3 From 9fe516ba3fb29b6f6a752ffd93342fdee500ec01 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 27 Jun 2014 08:36:16 -0700 Subject: inet: move ipv6only in sock_common When an UDP application switches from AF_INET to AF_INET6 sockets, we have a small performance degradation for IPv4 communications because of extra cache line misses to access ipv6only information. This can also be noticed for TCP listeners, as ipv6_only_sock() is also used from __inet_lookup_listener()->compute_score() This is magnified when SO_REUSEPORT is used. Move ipv6only into struct sock_common so that it is available at no extra cost in lookups. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/ipv6.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index b0f2452f1d58..5dc68c3ebcbd 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -194,7 +194,7 @@ struct ipv6_pinfo { sndflow:1, repflow:1, pmtudisc:3, - ipv6only:1, + padding:1, /* 1 bit hole */ srcprefs:3, /* 001: prefer temporary address * 010: prefer public address * 100: prefer care-of address @@ -273,8 +273,8 @@ static inline void inet_sk_copy_descendant(struct sock *sk_to, __inet_sk_copy_descendant(sk_to, sk_from, ancestor_size); } -#define __ipv6_only_sock(sk) (inet6_sk(sk)->ipv6only) -#define ipv6_only_sock(sk) ((sk)->sk_family == PF_INET6 && __ipv6_only_sock(sk)) +#define __ipv6_only_sock(sk) (sk->sk_ipv6only) +#define ipv6_only_sock(sk) (__ipv6_only_sock(sk)) #define ipv6_sk_rxinfo(sk) ((sk)->sk_family == PF_INET6 && \ inet6_sk(sk)->rxopt.bits.rxinfo) @@ -287,8 +287,8 @@ static inline const struct in6_addr *inet6_rcv_saddr(const struct sock *sk) static inline int inet_v6_ipv6only(const struct sock *sk) { - return likely(sk->sk_state != TCP_TIME_WAIT) ? - ipv6_only_sock(sk) : inet_twsk(sk)->tw_ipv6only; + /* ipv6only field is at same position for timewait and other sockets */ + return ipv6_only_sock(sk); } #else #define __ipv6_only_sock(sk) 0 -- cgit v1.2.3 From f473832fece16611520bf54ad52b16c3f6db0a94 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Sat, 5 Jul 2014 01:10:41 +0200 Subject: bcma: add driver for PCIe Gen 2 core MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit New Broadcom PCIe devices (802.11ac ones?) use Gen2 and have to be initialized differently. Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- include/linux/bcma/bcma.h | 2 + include/linux/bcma/bcma_driver_pcie2.h | 158 +++++++++++++++++++++++++++++++++ 2 files changed, 160 insertions(+) create mode 100644 include/linux/bcma/bcma_driver_pcie2.h (limited to 'include/linux') diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index 0b3bb16c705a..452286a38b2b 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -6,6 +6,7 @@ #include #include +#include #include #include #include /* SPROM sharing */ @@ -333,6 +334,7 @@ struct bcma_bus { struct bcma_drv_cc drv_cc; struct bcma_drv_pci drv_pci[2]; + struct bcma_drv_pcie2 drv_pcie2; struct bcma_drv_mips drv_mips; struct bcma_drv_gmac_cmn drv_gmac_cmn; diff --git a/include/linux/bcma/bcma_driver_pcie2.h b/include/linux/bcma/bcma_driver_pcie2.h new file mode 100644 index 000000000000..5988b05781c3 --- /dev/null +++ b/include/linux/bcma/bcma_driver_pcie2.h @@ -0,0 +1,158 @@ +#ifndef LINUX_BCMA_DRIVER_PCIE2_H_ +#define LINUX_BCMA_DRIVER_PCIE2_H_ + +#define BCMA_CORE_PCIE2_CLK_CONTROL 0x0000 +#define PCIE2_CLKC_RST_OE 0x0001 /* When set, drives PCI_RESET out to pin */ +#define PCIE2_CLKC_RST 0x0002 /* Value driven out to pin */ +#define PCIE2_CLKC_SPERST 0x0004 /* SurvivePeRst */ +#define PCIE2_CLKC_DISABLE_L1CLK_GATING 0x0010 +#define PCIE2_CLKC_DLYPERST 0x0100 /* Delay PeRst to CoE Core */ +#define PCIE2_CLKC_DISSPROMLD 0x0200 /* DisableSpromLoadOnPerst */ +#define PCIE2_CLKC_WAKE_MODE_L2 0x1000 /* Wake on L2 */ +#define BCMA_CORE_PCIE2_RC_PM_CONTROL 0x0004 +#define BCMA_CORE_PCIE2_RC_PM_STATUS 0x0008 +#define BCMA_CORE_PCIE2_EP_PM_CONTROL 0x000C +#define BCMA_CORE_PCIE2_EP_PM_STATUS 0x0010 +#define BCMA_CORE_PCIE2_EP_LTR_CONTROL 0x0014 +#define BCMA_CORE_PCIE2_EP_LTR_STATUS 0x0018 +#define BCMA_CORE_PCIE2_EP_OBFF_STATUS 0x001C +#define BCMA_CORE_PCIE2_PCIE_ERR_STATUS 0x0020 +#define BCMA_CORE_PCIE2_RC_AXI_CONFIG 0x0100 +#define BCMA_CORE_PCIE2_EP_AXI_CONFIG 0x0104 +#define BCMA_CORE_PCIE2_RXDEBUG_STATUS0 0x0108 +#define BCMA_CORE_PCIE2_RXDEBUG_CONTROL0 0x010C +#define BCMA_CORE_PCIE2_CONFIGINDADDR 0x0120 +#define BCMA_CORE_PCIE2_CONFIGINDDATA 0x0124 +#define BCMA_CORE_PCIE2_MDIOCONTROL 0x0128 +#define BCMA_CORE_PCIE2_MDIOWRDATA 0x012C +#define BCMA_CORE_PCIE2_MDIORDDATA 0x0130 +#define BCMA_CORE_PCIE2_DATAINTF 0x0180 +#define BCMA_CORE_PCIE2_D2H_INTRLAZY_0 0x0188 +#define BCMA_CORE_PCIE2_H2D_INTRLAZY_0 0x018c +#define BCMA_CORE_PCIE2_H2D_INTSTAT_0 0x0190 +#define BCMA_CORE_PCIE2_H2D_INTMASK_0 0x0194 +#define BCMA_CORE_PCIE2_D2H_INTSTAT_0 0x0198 +#define BCMA_CORE_PCIE2_D2H_INTMASK_0 0x019c +#define BCMA_CORE_PCIE2_LTR_STATE 0x01A0 /* Latency Tolerance Reporting */ +#define PCIE2_LTR_ACTIVE 2 +#define PCIE2_LTR_ACTIVE_IDLE 1 +#define PCIE2_LTR_SLEEP 0 +#define PCIE2_LTR_FINAL_MASK 0x300 +#define PCIE2_LTR_FINAL_SHIFT 8 +#define BCMA_CORE_PCIE2_PWR_INT_STATUS 0x01A4 +#define BCMA_CORE_PCIE2_PWR_INT_MASK 0x01A8 +#define BCMA_CORE_PCIE2_CFG_ADDR 0x01F8 +#define BCMA_CORE_PCIE2_CFG_DATA 0x01FC +#define BCMA_CORE_PCIE2_SYS_EQ_PAGE 0x0200 +#define BCMA_CORE_PCIE2_SYS_MSI_PAGE 0x0204 +#define BCMA_CORE_PCIE2_SYS_MSI_INTREN 0x0208 +#define BCMA_CORE_PCIE2_SYS_MSI_CTRL0 0x0210 +#define BCMA_CORE_PCIE2_SYS_MSI_CTRL1 0x0214 +#define BCMA_CORE_PCIE2_SYS_MSI_CTRL2 0x0218 +#define BCMA_CORE_PCIE2_SYS_MSI_CTRL3 0x021C +#define BCMA_CORE_PCIE2_SYS_MSI_CTRL4 0x0220 +#define BCMA_CORE_PCIE2_SYS_MSI_CTRL5 0x0224 +#define BCMA_CORE_PCIE2_SYS_EQ_HEAD0 0x0250 +#define BCMA_CORE_PCIE2_SYS_EQ_TAIL0 0x0254 +#define BCMA_CORE_PCIE2_SYS_EQ_HEAD1 0x0258 +#define BCMA_CORE_PCIE2_SYS_EQ_TAIL1 0x025C +#define BCMA_CORE_PCIE2_SYS_EQ_HEAD2 0x0260 +#define BCMA_CORE_PCIE2_SYS_EQ_TAIL2 0x0264 +#define BCMA_CORE_PCIE2_SYS_EQ_HEAD3 0x0268 +#define BCMA_CORE_PCIE2_SYS_EQ_TAIL3 0x026C +#define BCMA_CORE_PCIE2_SYS_EQ_HEAD4 0x0270 +#define BCMA_CORE_PCIE2_SYS_EQ_TAIL4 0x0274 +#define BCMA_CORE_PCIE2_SYS_EQ_HEAD5 0x0278 +#define BCMA_CORE_PCIE2_SYS_EQ_TAIL5 0x027C +#define BCMA_CORE_PCIE2_SYS_RC_INTX_EN 0x0330 +#define BCMA_CORE_PCIE2_SYS_RC_INTX_CSR 0x0334 +#define BCMA_CORE_PCIE2_SYS_MSI_REQ 0x0340 +#define BCMA_CORE_PCIE2_SYS_HOST_INTR_EN 0x0344 +#define BCMA_CORE_PCIE2_SYS_HOST_INTR_CSR 0x0348 +#define BCMA_CORE_PCIE2_SYS_HOST_INTR0 0x0350 +#define BCMA_CORE_PCIE2_SYS_HOST_INTR1 0x0354 +#define BCMA_CORE_PCIE2_SYS_HOST_INTR2 0x0358 +#define BCMA_CORE_PCIE2_SYS_HOST_INTR3 0x035C +#define BCMA_CORE_PCIE2_SYS_EP_INT_EN0 0x0360 +#define BCMA_CORE_PCIE2_SYS_EP_INT_EN1 0x0364 +#define BCMA_CORE_PCIE2_SYS_EP_INT_CSR0 0x0370 +#define BCMA_CORE_PCIE2_SYS_EP_INT_CSR1 0x0374 +#define BCMA_CORE_PCIE2_SPROM(wordoffset) (0x0800 + ((wordoffset) * 2)) +#define BCMA_CORE_PCIE2_FUNC0_IMAP0_0 0x0C00 +#define BCMA_CORE_PCIE2_FUNC0_IMAP0_1 0x0C04 +#define BCMA_CORE_PCIE2_FUNC0_IMAP0_2 0x0C08 +#define BCMA_CORE_PCIE2_FUNC0_IMAP0_3 0x0C0C +#define BCMA_CORE_PCIE2_FUNC0_IMAP0_4 0x0C10 +#define BCMA_CORE_PCIE2_FUNC0_IMAP0_5 0x0C14 +#define BCMA_CORE_PCIE2_FUNC0_IMAP0_6 0x0C18 +#define BCMA_CORE_PCIE2_FUNC0_IMAP0_7 0x0C1C +#define BCMA_CORE_PCIE2_FUNC1_IMAP0_0 0x0C20 +#define BCMA_CORE_PCIE2_FUNC1_IMAP0_1 0x0C24 +#define BCMA_CORE_PCIE2_FUNC1_IMAP0_2 0x0C28 +#define BCMA_CORE_PCIE2_FUNC1_IMAP0_3 0x0C2C +#define BCMA_CORE_PCIE2_FUNC1_IMAP0_4 0x0C30 +#define BCMA_CORE_PCIE2_FUNC1_IMAP0_5 0x0C34 +#define BCMA_CORE_PCIE2_FUNC1_IMAP0_6 0x0C38 +#define BCMA_CORE_PCIE2_FUNC1_IMAP0_7 0x0C3C +#define BCMA_CORE_PCIE2_FUNC0_IMAP1 0x0C80 +#define BCMA_CORE_PCIE2_FUNC1_IMAP1 0x0C88 +#define BCMA_CORE_PCIE2_FUNC0_IMAP2 0x0CC0 +#define BCMA_CORE_PCIE2_FUNC1_IMAP2 0x0CC8 +#define BCMA_CORE_PCIE2_IARR0_LOWER 0x0D00 +#define BCMA_CORE_PCIE2_IARR0_UPPER 0x0D04 +#define BCMA_CORE_PCIE2_IARR1_LOWER 0x0D08 +#define BCMA_CORE_PCIE2_IARR1_UPPER 0x0D0C +#define BCMA_CORE_PCIE2_IARR2_LOWER 0x0D10 +#define BCMA_CORE_PCIE2_IARR2_UPPER 0x0D14 +#define BCMA_CORE_PCIE2_OARR0 0x0D20 +#define BCMA_CORE_PCIE2_OARR1 0x0D28 +#define BCMA_CORE_PCIE2_OARR2 0x0D30 +#define BCMA_CORE_PCIE2_OMAP0_LOWER 0x0D40 +#define BCMA_CORE_PCIE2_OMAP0_UPPER 0x0D44 +#define BCMA_CORE_PCIE2_OMAP1_LOWER 0x0D48 +#define BCMA_CORE_PCIE2_OMAP1_UPPER 0x0D4C +#define BCMA_CORE_PCIE2_OMAP2_LOWER 0x0D50 +#define BCMA_CORE_PCIE2_OMAP2_UPPER 0x0D54 +#define BCMA_CORE_PCIE2_FUNC1_IARR1_SIZE 0x0D58 +#define BCMA_CORE_PCIE2_FUNC1_IARR2_SIZE 0x0D5C +#define BCMA_CORE_PCIE2_MEM_CONTROL 0x0F00 +#define BCMA_CORE_PCIE2_MEM_ECC_ERRLOG0 0x0F04 +#define BCMA_CORE_PCIE2_MEM_ECC_ERRLOG1 0x0F08 +#define BCMA_CORE_PCIE2_LINK_STATUS 0x0F0C +#define BCMA_CORE_PCIE2_STRAP_STATUS 0x0F10 +#define BCMA_CORE_PCIE2_RESET_STATUS 0x0F14 +#define BCMA_CORE_PCIE2_RESETEN_IN_LINKDOWN 0x0F18 +#define BCMA_CORE_PCIE2_MISC_INTR_EN 0x0F1C +#define BCMA_CORE_PCIE2_TX_DEBUG_CFG 0x0F20 +#define BCMA_CORE_PCIE2_MISC_CONFIG 0x0F24 +#define BCMA_CORE_PCIE2_MISC_STATUS 0x0F28 +#define BCMA_CORE_PCIE2_INTR_EN 0x0F30 +#define BCMA_CORE_PCIE2_INTR_CLEAR 0x0F34 +#define BCMA_CORE_PCIE2_INTR_STATUS 0x0F38 + +/* PCIE gen2 config regs */ +#define PCIE2_INTSTATUS 0x090 +#define PCIE2_INTMASK 0x094 +#define PCIE2_SBMBX 0x098 + +#define PCIE2_PMCR_REFUP 0x1814 /* Trefup time */ + +#define PCIE2_CAP_DEVSTSCTRL2_OFFSET 0xD4 +#define PCIE2_CAP_DEVSTSCTRL2_LTRENAB 0x400 +#define PCIE2_PVT_REG_PM_CLK_PERIOD 0x184c + +struct bcma_drv_pcie2 { + struct bcma_device *core; +}; + +#define pcie2_read16(pcie2, offset) bcma_read16((pcie2)->core, offset) +#define pcie2_read32(pcie2, offset) bcma_read32((pcie2)->core, offset) +#define pcie2_write16(pcie2, offset, val) bcma_write16((pcie2)->core, offset, val) +#define pcie2_write32(pcie2, offset, val) bcma_write32((pcie2)->core, offset, val) + +#define pcie2_set32(pcie2, offset, set) bcma_set32((pcie2)->core, offset, set) +#define pcie2_mask32(pcie2, offset, mask) bcma_mask32((pcie2)->core, offset, mask) + +void bcma_core_pcie2_init(struct bcma_drv_pcie2 *pcie2); + +#endif /* LINUX_BCMA_DRIVER_PCIE2_H_ */ -- cgit v1.2.3 From ae5c6c6d7bcadfbedefb5fc8ff0ebe2bfa83a0a1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Stefan=20S=C3=B8rensen?= Date: Fri, 27 Jun 2014 11:59:10 +0200 Subject: ptp: Classify ptp over ip over vlan packets MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This extends the ptp bpf to also match ptp over ip over vlan packets. The ptp classes are changed to orthogonal bitfields representing version, transport and vlan values to simplify matching. Signed-off-by: Stefan Sørensen Signed-off-by: David S. Miller --- include/linux/ptp_classify.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ptp_classify.h b/include/linux/ptp_classify.h index 7dfed71d76a6..159c987b1853 100644 --- a/include/linux/ptp_classify.h +++ b/include/linux/ptp_classify.h @@ -33,8 +33,8 @@ #define PTP_CLASS_IPV4 0x10 /* event in an IPV4 UDP packet */ #define PTP_CLASS_IPV6 0x20 /* event in an IPV6 UDP packet */ #define PTP_CLASS_L2 0x30 /* event in a L2 packet */ -#define PTP_CLASS_VLAN 0x40 /* event in a VLAN tagged L2 packet */ -#define PTP_CLASS_PMASK 0xf0 /* mask for the packet type field */ +#define PTP_CLASS_PMASK 0x30 /* mask for the packet type field */ +#define PTP_CLASS_VLAN 0x40 /* event in a VLAN tagged packet */ #define PTP_CLASS_V1_IPV4 (PTP_CLASS_V1 | PTP_CLASS_IPV4) #define PTP_CLASS_V1_IPV6 (PTP_CLASS_V1 | PTP_CLASS_IPV6) /* probably DNE */ @@ -54,7 +54,6 @@ #define IP6_HLEN 40 #define UDP_HLEN 8 #define OFF_IHL 14 -#define OFF_PTP6 (ETH_HLEN + IP6_HLEN + UDP_HLEN) #define IPV4_HLEN(data) (((struct iphdr *)(data + OFF_IHL))->ihl << 2) #if defined(CONFIG_NET_PTP_CLASSIFY) -- cgit v1.2.3 From 0e001614e849b68cff94cda8db8b550569d3dba6 Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Tue, 1 Jul 2014 21:32:27 -0700 Subject: net: Call skb_get_hash in get_xps_queue and __skb_tx_hash Call standard function to get a packet hash instead of taking this from skb->sk->sk_hash or only using skb->protocol. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller --- include/linux/netdevice.h | 2 +- include/linux/skbuff.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 66f9a04ec270..8b43a28ee0bc 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2486,7 +2486,7 @@ static inline int netif_set_xps_queue(struct net_device *dev, * as a distribution range limit for the returned value. */ static inline u16 skb_tx_hash(const struct net_device *dev, - const struct sk_buff *skb) + struct sk_buff *skb) { return __skb_tx_hash(dev, skb, dev->real_num_tx_queues); } diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index ec89301ada41..b297af70ac30 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -3005,7 +3005,7 @@ static inline bool skb_rx_queue_recorded(const struct sk_buff *skb) return skb->queue_mapping != 0; } -u16 __skb_tx_hash(const struct net_device *dev, const struct sk_buff *skb, +u16 __skb_tx_hash(const struct net_device *dev, struct sk_buff *skb, unsigned int num_tx_queues); static inline struct sec_path *skb_sec_path(struct sk_buff *skb) -- cgit v1.2.3 From cb1ce2ef387b01686469487edd45994872d52d73 Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Tue, 1 Jul 2014 21:33:10 -0700 Subject: ipv6: Implement automatic flow label generation on transmit Automatically generate flow labels for IPv6 packets on transmit. The flow label is computed based on skb_get_hash. The flow label will only automatically be set when it is zero otherwise (i.e. flow label manager hasn't set one). This supports the transmit side functionality of RFC 6438. Added an IPv6 sysctl auto_flowlabels to enable/disable this behavior system wide, and added IPV6_AUTOFLOWLABEL socket option to enable this functionality per socket. By default, auto flowlabels are disabled to avoid possible conflicts with flow label manager, however if this feature proves useful we may want to enable it by default. It should also be noted that FreeBSD has already implemented automatic flow labels (including the sysctl and socket option). In FreeBSD, automatic flow labels default to enabled. Performance impact: Running super_netperf with 200 flows for TCP_RR and UDP_RR for IPv6. Note that in UDP case, __skb_get_hash will be called for every packet with explains slight regression. In the TCP case the hash is saved in the socket so there is no regression. Automatic flow labels disabled: TCP_RR: 86.53% CPU utilization 127/195/322 90/95/99% latencies 1.40498e+06 tps UDP_RR: 90.70% CPU utilization 118/168/243 90/95/99% latencies 1.50309e+06 tps Automatic flow labels enabled: TCP_RR: 85.90% CPU utilization 128/199/337 90/95/99% latencies 1.40051e+06 UDP_RR 92.61% CPU utilization 115/164/236 90/95/99% latencies 1.4687e+06 Signed-off-by: Tom Herbert Signed-off-by: David S. Miller --- include/linux/ipv6.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index 5dc68c3ebcbd..ff560537dd61 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -199,7 +199,8 @@ struct ipv6_pinfo { * 010: prefer public address * 100: prefer care-of address */ - dontfrag:1; + dontfrag:1, + autoflowlabel:1; __u8 min_hopcount; __u8 tclass; __be32 rcv_flowinfo; -- cgit v1.2.3 From a3b18ddb9cc1056eea24e3edc1828cfb3fd0726f Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Tue, 1 Jul 2014 21:33:17 -0700 Subject: net: Only do flow_dissector hash computation once per packet Add sw_hash flag to skbuff to indicate that skb->hash was computed from flow_dissector. This flag is checked in skb_get_hash to avoid repeatedly trying to compute the hash (ie. in the case that no L4 hash can be computed). Signed-off-by: Tom Herbert Signed-off-by: David S. Miller --- include/linux/skbuff.h | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index b297af70ac30..890fb3307dd6 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -455,6 +455,7 @@ static inline u32 skb_mstamp_us_delta(const struct skb_mstamp *t1, * @ooo_okay: allow the mapping of a socket to a queue to be changed * @l4_hash: indicate hash is a canonical 4-tuple hash over transport * ports. + * @sw_hash: indicates hash was computed in software stack * @wifi_acked_valid: wifi_acked was set * @wifi_acked: whether frame was acked on wifi or not * @no_fcs: Request NIC to treat last 4 bytes as Ethernet FCS @@ -562,6 +563,7 @@ struct sk_buff { __u8 pfmemalloc:1; __u8 ooo_okay:1; __u8 l4_hash:1; + __u8 sw_hash:1; __u8 wifi_acked_valid:1; __u8 wifi_acked:1; __u8 no_fcs:1; @@ -575,7 +577,7 @@ struct sk_buff { __u8 encap_hdr_csum:1; __u8 csum_valid:1; __u8 csum_complete_sw:1; - /* 3/5 bit hole (depending on ndisc_nodetype presence) */ + /* 2/4 bit hole (depending on ndisc_nodetype presence) */ kmemcheck_bitfield_end(flags2); #if defined CONFIG_NET_DMA || defined CONFIG_NET_RX_BUSY_POLL @@ -830,13 +832,14 @@ static inline void skb_set_hash(struct sk_buff *skb, __u32 hash, enum pkt_hash_types type) { skb->l4_hash = (type == PKT_HASH_TYPE_L4); + skb->sw_hash = 0; skb->hash = hash; } void __skb_get_hash(struct sk_buff *skb); static inline __u32 skb_get_hash(struct sk_buff *skb) { - if (!skb->l4_hash) + if (!skb->l4_hash && !skb->sw_hash) __skb_get_hash(skb); return skb->hash; @@ -850,6 +853,7 @@ static inline __u32 skb_get_hash_raw(const struct sk_buff *skb) static inline void skb_clear_hash(struct sk_buff *skb) { skb->hash = 0; + skb->sw_hash = 0; skb->l4_hash = 0; } @@ -862,6 +866,7 @@ static inline void skb_clear_hash_if_not_l4(struct sk_buff *skb) static inline void skb_copy_hash(struct sk_buff *to, const struct sk_buff *from) { to->hash = from->hash; + to->sw_hash = from->sw_hash; to->l4_hash = from->l4_hash; }; -- cgit v1.2.3 From db55b62cab8d458aba4e7a81dc4dd98b45c03d85 Mon Sep 17 00:00:00 2001 From: Rasmus Villemoes Date: Wed, 2 Jul 2014 14:12:01 +0200 Subject: net: arcnet: Remove "#define bool int" The header file include/linux/arcdevice.h #defines bool to int, if bool is not already #defined. However, the files which use that header file seem to rely on that #define (unconditionally) being in effect: the prototypes for the functions arcrimi_reset, com20020_reset, com90io_reset, com90xx_reset (whose addresses are assigned to the hw.reset member of struct arcnet_local) use int explicitly. Moreover, that #define is an accident waiting to happen (scenario: inclusion of arcdevice.h followed by inclusion of some header which declares function prototypes using bool). Also, #include must appear before #include (the compiler wouldn't like "typedef _Bool int"). Since none of the files using arcdevice.h declare variables of type "bool", the patch is actually quite simple, unlike the commit message. Signed-off-by: Rasmus Villemoes Signed-off-by: David S. Miller --- include/linux/arcdevice.h | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/arcdevice.h b/include/linux/arcdevice.h index 7216b0daf544..df0356220730 100644 --- a/include/linux/arcdevice.h +++ b/include/linux/arcdevice.h @@ -22,10 +22,6 @@ #ifdef __KERNEL__ #include -#ifndef bool -#define bool int -#endif - /* * RECON_THRESHOLD is the maximum number of RECON messages to receive * within one minute before printing a "cabling problem" warning. The @@ -285,9 +281,9 @@ struct arcnet_local { unsigned long first_recon; /* time of "first" RECON message to count */ unsigned long last_recon; /* time of most recent RECON */ int num_recons; /* number of RECONs between first and last. */ - bool network_down; /* do we think the network is down? */ + int network_down; /* do we think the network is down? */ - bool excnak_pending; /* We just got an excesive nak interrupt */ + int excnak_pending; /* We just got an excesive nak interrupt */ struct { uint16_t sequence; /* sequence number (incs with each packet) */ @@ -305,7 +301,7 @@ struct arcnet_local { void (*command) (struct net_device * dev, int cmd); int (*status) (struct net_device * dev); void (*intmask) (struct net_device * dev, int mask); - bool (*reset) (struct net_device * dev, bool really_reset); + int (*reset) (struct net_device * dev, int really_reset); void (*open) (struct net_device * dev); void (*close) (struct net_device * dev); -- cgit v1.2.3 From 9f12fbe603f7ae346b2b46008e325f0c9a68e55d Mon Sep 17 00:00:00 2001 From: Zi Shen Lim Date: Thu, 3 Jul 2014 07:56:54 -0700 Subject: net: filter: move load_pointer() into filter.h load_pointer() is already a static inline function. Let's move it into filter.h so BPF JIT implementations can reuse this function. Since we're exporting this function, let's also rename it to bpf_load_pointer() for clarity. Signed-off-by: Zi Shen Lim Reviewed-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller --- include/linux/filter.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'include/linux') diff --git a/include/linux/filter.h b/include/linux/filter.h index a7e3c48d73a7..b885dcb7eaca 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -6,6 +6,7 @@ #include #include +#include #include #include @@ -406,6 +407,18 @@ static inline u16 bpf_anc_helper(const struct sock_filter *ftest) } } +void *bpf_internal_load_pointer_neg_helper(const struct sk_buff *skb, + int k, unsigned int size); + +static inline void *bpf_load_pointer(const struct sk_buff *skb, int k, + unsigned int size, void *buffer) +{ + if (k >= 0) + return skb_header_pointer(skb, k, size, buffer); + + return bpf_internal_load_pointer_neg_helper(skb, k, size); +} + #ifdef CONFIG_BPF_JIT #include #include -- cgit v1.2.3 From f941a6d9a9e0612eb807af822b0d1ac004da8175 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Linus=20L=C3=BCssing?= Date: Mon, 7 Jul 2014 05:41:16 +0200 Subject: bridge: adding stubs for multicast exports MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To make users (e.g. batman-adv soon) load- and runnable even if the bridge was compiled without snooping capabilities - or even if the kernel was compiled without any bridge code at all. Signed-off-by: Linus Lüssing Signed-off-by: David S. Miller --- include/linux/if_bridge.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'include/linux') diff --git a/include/linux/if_bridge.h b/include/linux/if_bridge.h index fd22789d7b2e..e0c575ca89f7 100644 --- a/include/linux/if_bridge.h +++ b/include/linux/if_bridge.h @@ -36,8 +36,22 @@ extern void brioctl_set(int (*ioctl_hook)(struct net *, unsigned int, void __use typedef int br_should_route_hook_t(struct sk_buff *skb); extern br_should_route_hook_t __rcu *br_should_route_hook; + +#if IS_ENABLED(CONFIG_BRIDGE) && IS_ENABLED(CONFIG_BRIDGE_IGMP_SNOOPING) int br_multicast_list_adjacent(struct net_device *dev, struct list_head *br_ip_list); bool br_multicast_has_querier_adjacent(struct net_device *dev, int proto); +#else +static inline int br_multicast_list_adjacent(struct net_device *dev, + struct list_head *br_ip_list) +{ + return 0; +} +static inline bool br_multicast_has_querier_adjacent(struct net_device *dev, + int proto) +{ + return false; +} +#endif #endif -- cgit v1.2.3 From c34963e21685659eb513e1c4d847f81d8a8f13f3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Linus=20L=C3=BCssing?= Date: Mon, 7 Jul 2014 05:41:17 +0200 Subject: bridge: export knowledge about the presence of IGMP/MLD queriers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With this patch other modules are able to ask the bridge whether an IGMP or MLD querier exists on the according, bridged link layer. Multicast snooping can only be performed if a valid, selected querier exists on a link. Just like the bridge only enables its multicast snooping if a querier exists, e.g. batman-adv too can only activate its multicast snooping in bridged scenarios if a querier is present. For instance this export avoids having to reimplement IGMP/MLD querier message snooping and parsing in e.g. batman-adv, when multicast optimizations for bridged scenarios are added in the future. Signed-off-by: Linus Lüssing Signed-off-by: David S. Miller --- include/linux/if_bridge.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/if_bridge.h b/include/linux/if_bridge.h index e0c575ca89f7..808dcb8cc04f 100644 --- a/include/linux/if_bridge.h +++ b/include/linux/if_bridge.h @@ -40,6 +40,7 @@ extern br_should_route_hook_t __rcu *br_should_route_hook; #if IS_ENABLED(CONFIG_BRIDGE) && IS_ENABLED(CONFIG_BRIDGE_IGMP_SNOOPING) int br_multicast_list_adjacent(struct net_device *dev, struct list_head *br_ip_list); +bool br_multicast_has_querier_anywhere(struct net_device *dev, int proto); bool br_multicast_has_querier_adjacent(struct net_device *dev, int proto); #else static inline int br_multicast_list_adjacent(struct net_device *dev, @@ -47,6 +48,11 @@ static inline int br_multicast_list_adjacent(struct net_device *dev, { return 0; } +static inline bool br_multicast_has_querier_anywhere(struct net_device *dev, + int proto) +{ + return false; +} static inline bool br_multicast_has_querier_adjacent(struct net_device *dev, int proto) { -- cgit v1.2.3 From 523ece889eeee84a381e16086b81e07a76cff8b6 Mon Sep 17 00:00:00 2001 From: Eugenia Emantayev Date: Tue, 8 Jul 2014 11:25:19 +0300 Subject: net/mlx4_en: Fix set port ratelimit for 40GE In 40GE we can't use the default bw units for set ratelimit (100 Mbps) since the max is 255*100 Mbps = 25 Gbps (not suited for 40GE), thus we need 1 Gbps units. But for 10GE 1 Gbps units might be too bruit so we use the following solution. For user set ratelimit <= 25 Gbps: use 100 Mbps units * user_ratelimit (* 10). For user set ratelimit > 25 Gbps: use 1 Gbps units * user_ratelimit. For user set unlimited ratelimit (0 Gbps): use 1 Gbps units * MAX_RATELIMIT_DEFAULT (57) Note: any value > 58 will damage the FW ratelimit computation, so we allow a max and any higher value will be pulled down to 57. Signed-off-by: Sagi Grimberg Signed-off-by: Eugenia Emantayev Signed-off-by: Amir Vadai Signed-off-by: David S. Miller --- include/linux/mlx4/device.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index b12f4bbd064c..db0aef37645f 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -48,6 +48,17 @@ #define MSIX_LEGACY_SZ 4 #define MIN_MSIX_P_PORT 5 +#define MLX4_NUM_UP 8 +#define MLX4_NUM_TC 8 +#define MLX4_MAX_100M_UNITS_VAL 255 /* + * work around: can't set values + * greater then this value when + * using 100 Mbps units. + */ +#define MLX4_RATELIMIT_100M_UNITS 3 /* 100 Mbps */ +#define MLX4_RATELIMIT_1G_UNITS 4 /* 1 Gbps */ +#define MLX4_RATELIMIT_DEFAULT 0x00ff + #define MLX4_ROCE_MAX_GIDS 128 #define MLX4_ROCE_PF_GIDS 16 -- cgit v1.2.3 From 5d5eacb34c9e1fdc0a47b885d832eaa4de860dc7 Mon Sep 17 00:00:00 2001 From: Jamal Hadi Salim Date: Thu, 10 Jul 2014 07:01:58 -0400 Subject: bridge: fdb dumping takes a filter device Dumping a bridge fdb dumps every fdb entry held. With this change we are going to filter on selected bridge port. Signed-off-by: Jamal Hadi Salim Signed-off-by: David S. Miller --- include/linux/netdevice.h | 4 +++- include/linux/rtnetlink.h | 1 + 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 8b43a28ee0bc..3a320db96180 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -943,7 +943,8 @@ typedef u16 (*select_queue_fallback_t)(struct net_device *dev, * const unsigned char *addr) * Deletes the FDB entry from dev coresponding to addr. * int (*ndo_fdb_dump)(struct sk_buff *skb, struct netlink_callback *cb, - * struct net_device *dev, int idx) + * struct net_device *dev, struct net_device *filter_dev, + * int idx) * Used to add FDB entries to dump requests. Implementers should add * entries to skb and update idx with the number of entries. * @@ -1114,6 +1115,7 @@ struct net_device_ops { int (*ndo_fdb_dump)(struct sk_buff *skb, struct netlink_callback *cb, struct net_device *dev, + struct net_device *filter_dev, int idx); int (*ndo_bridge_setlink)(struct net_device *dev, diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h index 953937ea5233..167bae7bdfa4 100644 --- a/include/linux/rtnetlink.h +++ b/include/linux/rtnetlink.h @@ -78,6 +78,7 @@ extern void __rtnl_unlock(void); extern int ndo_dflt_fdb_dump(struct sk_buff *skb, struct netlink_callback *cb, struct net_device *dev, + struct net_device *filter_dev, int idx); extern int ndo_dflt_fdb_add(struct ndmsg *ndm, struct nlattr *tb[], -- cgit v1.2.3 From ec31a05c4dfa95149b1754d9de92831a5a95c636 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 12 Jul 2014 15:49:16 +0200 Subject: net: filter: sk_chk_filter() no longer mangles filter Add const attribute to filter argument to make clear it is no longer modified. Signed-off-by: Eric Dumazet Acked-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller --- include/linux/filter.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/filter.h b/include/linux/filter.h index b885dcb7eaca..c43c8258e682 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -362,7 +362,7 @@ void sk_unattached_filter_destroy(struct sk_filter *fp); int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk); int sk_detach_filter(struct sock *sk); -int sk_chk_filter(struct sock_filter *filter, unsigned int flen); +int sk_chk_filter(const struct sock_filter *filter, unsigned int flen); int sk_get_filter(struct sock *sk, struct sock_filter __user *filter, unsigned int len); -- cgit v1.2.3 From 685343fc3ba61a1f6eef361b786601123db16c28 Mon Sep 17 00:00:00 2001 From: Tom Gundersen Date: Mon, 14 Jul 2014 16:37:22 +0200 Subject: net: add name_assign_type netdev attribute Based on a patch by David Herrmann. The name_assign_type attribute gives hints where the interface name of a given net-device comes from. These values are currently defined: NET_NAME_ENUM: The ifname is provided by the kernel with an enumerated suffix, typically based on order of discovery. Names may be reused and unpredictable. NET_NAME_PREDICTABLE: The ifname has been assigned by the kernel in a predictable way that is guaranteed to avoid reuse and always be the same for a given device. Examples include statically created devices like the loopback device and names deduced from hardware properties (including being given explicitly by the firmware). Names depending on the order of discovery, or in any other way on the existence of other devices, must not be marked as PREDICTABLE. NET_NAME_USER: The ifname was provided by user-space during net-device setup. NET_NAME_RENAMED: The net-device has been renamed from userspace. Once this type is set, it cannot change again. NET_NAME_UNKNOWN: This is an internal placeholder to indicate that we yet haven't yet categorized the name. It will not be exposed to userspace, rather -EINVAL is returned. The aim of these patches is to improve user-space renaming of interfaces. As a general rule, userspace must rename interfaces to guarantee that names stay the same every time a given piece of hardware appears (at boot, or when attaching it). However, there are several situations where userspace should not perform the renaming, and that depends on both the policy of the local admin, but crucially also on the nature of the current interface name. If an interface was created in repsonse to a userspace request, and userspace already provided a name, we most probably want to leave that name alone. The main instance of this is wifi-P2P devices created over nl80211, which currently have a long-standing bug where they are getting renamed by udev. We label such names NET_NAME_USER. If an interface, unbeknown to us, has already been renamed from userspace, we most probably want to leave also that alone. This will typically happen when third-party plugins (for instance to udev, but the interface is generic so could be from anywhere) renames the interface without informing udev about it. A typical situation is when you switch root from an installer or an initrd to the real system and the new instance of udev does not know what happened before the switch. These types of problems have caused repeated issues in the past. To solve this, once an interface has been renamed, its name is labelled NET_NAME_RENAMED. In many cases, the kernel is actually able to name interfaces in such a way that there is no need for userspace to rename them. This is the case when the enumeration order of devices, or in fact any other (non-parent) device on the system, can not influence the name of the interface. Examples include statically created devices, or any naming schemes based on hardware properties of the interface. In this case the admin may prefer to use the kernel-provided names, and to make that possible we label such names NET_NAME_PREDICTABLE. We want the kernel to have tho possibilty of performing predictable interface naming itself (and exposing to userspace that it has), as the information necessary for a proper naming scheme for a certain class of devices may not be exposed to userspace. The case where renaming is almost certainly desired, is when the kernel has given the interface a name using global device enumeration based on order of discovery (ethX, wlanY, etc). These naming schemes are labelled NET_NAME_ENUM. Lastly, a fallback is left as NET_NAME_UNKNOWN, to indicate that a driver has not yet been ported. This is mostly useful as a transitionary measure, allowing us to label the various naming schemes bit by bit. v8: minor documentation fixes v9: move comment to the right commit Signed-off-by: Tom Gundersen Reviewed-by: David Herrmann Reviewed-by: Kay Sievers Signed-off-by: David S. Miller --- include/linux/netdevice.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 3a320db96180..9be34732142f 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1381,6 +1381,8 @@ struct net_device { struct kset *queues_kset; #endif + unsigned char name_assign_type; + bool uc_promisc; unsigned int promiscuity; unsigned int allmulti; -- cgit v1.2.3 From c835a677331495cf137a7f8a023463afd9f032f8 Mon Sep 17 00:00:00 2001 From: Tom Gundersen Date: Mon, 14 Jul 2014 16:37:24 +0200 Subject: net: set name_assign_type in alloc_netdev() Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert all users to pass NET_NAME_UNKNOWN. Coccinelle patch: @@ expression sizeof_priv, name, setup, txqs, rxqs, count; @@ ( -alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs) +alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs) | -alloc_netdev_mq(sizeof_priv, name, setup, count) +alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count) | -alloc_netdev(sizeof_priv, name, setup) +alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup) ) v9: move comments here from the wrong commit Signed-off-by: Tom Gundersen Reviewed-by: David Herrmann Signed-off-by: David S. Miller --- include/linux/netdevice.h | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 9be34732142f..15ed750458ad 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2991,13 +2991,15 @@ void ether_setup(struct net_device *dev); /* Support for loadable net-drivers */ struct net_device *alloc_netdev_mqs(int sizeof_priv, const char *name, + unsigned char name_assign_type, void (*setup)(struct net_device *), unsigned int txqs, unsigned int rxqs); -#define alloc_netdev(sizeof_priv, name, setup) \ - alloc_netdev_mqs(sizeof_priv, name, setup, 1, 1) +#define alloc_netdev(sizeof_priv, name, name_assign_type, setup) \ + alloc_netdev_mqs(sizeof_priv, name, name_assign_type, setup, 1, 1) -#define alloc_netdev_mq(sizeof_priv, name, setup, count) \ - alloc_netdev_mqs(sizeof_priv, name, setup, count, count) +#define alloc_netdev_mq(sizeof_priv, name, name_assign_type, setup, count) \ + alloc_netdev_mqs(sizeof_priv, name, name_assign_type, setup, count, \ + count) int register_netdev(struct net_device *dev); void unregister_netdev(struct net_device *dev); -- cgit v1.2.3 From 26c4fdb0528ae7c4be9fbc8a8210f3b410e6b5aa Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Mon, 14 Jul 2014 17:55:30 -0400 Subject: net-timestamp: document deprecated syststamp The SO_TIMESTAMPING API defines option SOF_TIMESTAMPING_SYS_HW. This feature is deprecated. It should not be implemented by new device drivers. Existing drivers do not implement it, either -- with one exception. Driver developers are encouraged to expose the NIC hw clock as a PTP HW clock source, instead, and synchronize system time to the HW source. The control flag cannot be removed due to being part of the ABI, nor can the structure scm_timestamping that is returned. Due to the one legacy driver, the internal datapath and structure are not removed. This patch only clearly marks the interface as deprecated. Device drivers should always return a syststamp value of zero. Signed-off-by: Willem de Bruijn ---- We can consider adding a WARN_ON_ONCE in__sock_recv_timestamp if non-zero syststamp is encountered Acked-by: Richard Cochran Signed-off-by: David S. Miller --- include/linux/skbuff.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 890fb3307dd6..369430340ed9 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -211,7 +211,7 @@ static inline void skb_frag_size_sub(skb_frag_t *frag, int delta) * struct skb_shared_hwtstamps - hardware time stamps * @hwtstamp: hardware time stamp transformed into duration * since arbitrary point in time - * @syststamp: hwtstamp transformed to system time base + * @syststamp: hwtstamp transformed to system time base (deprecated) * * Software time stamps generated by ktime_get_real() are stored in * skb->tstamp. The relation between the different kinds of time @@ -222,7 +222,9 @@ static inline void skb_frag_size_sub(skb_frag_t *frag, int delta) * syststamp/tstamp/"syststamp from other device" comparison is * limited by the accuracy of the transformation into system time * base. This depends on the device driver and its underlying - * hardware. + * hardware. The syststamp implementation is deprecated in favor + * of hwtstamps and hw PTP clock sources exposed directly to + * userspace. * * hwtstamps can only be compared against other hwtstamps from * the same device. -- cgit v1.2.3 From 6ad59343ecd72dd3f83c4db3bcddbb0beabb4c4c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Tue, 15 Jul 2014 16:18:57 +0200 Subject: ssb: extract power info from SPROM revs 4 and 5 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is needed to properly handle early 802.11n devices like BCM4321. Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- include/linux/ssb/ssb_regs.h | 37 +++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h index f9f931c89e3e..f7b9100686c3 100644 --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -345,6 +345,43 @@ #define SSB_SPROM4_TXPID5GH2_SHIFT 0 #define SSB_SPROM4_TXPID5GH3 0xFF00 #define SSB_SPROM4_TXPID5GH3_SHIFT 8 + +/* There are 4 blocks with power info sharing the same layout */ +#define SSB_SPROM4_PWR_INFO_CORE0 0x0080 +#define SSB_SPROM4_PWR_INFO_CORE1 0x00AE +#define SSB_SPROM4_PWR_INFO_CORE2 0x00DC +#define SSB_SPROM4_PWR_INFO_CORE3 0x010A + +#define SSB_SPROM4_2G_MAXP_ITSSI 0x00 /* 2 GHz ITSSI and 2 GHz Max Power */ +#define SSB_SPROM4_2G_MAXP 0x00FF +#define SSB_SPROM4_2G_ITSSI 0xFF00 +#define SSB_SPROM4_2G_ITSSI_SHIFT 8 +#define SSB_SPROM4_2G_PA_0 0x02 /* 2 GHz power amp */ +#define SSB_SPROM4_2G_PA_1 0x04 +#define SSB_SPROM4_2G_PA_2 0x06 +#define SSB_SPROM4_2G_PA_3 0x08 +#define SSB_SPROM4_5G_MAXP_ITSSI 0x0A /* 5 GHz ITSSI and 5.3 GHz Max Power */ +#define SSB_SPROM4_5G_MAXP 0x00FF +#define SSB_SPROM4_5G_ITSSI 0xFF00 +#define SSB_SPROM4_5G_ITSSI_SHIFT 8 +#define SSB_SPROM4_5GHL_MAXP 0x0C /* 5.2 GHz and 5.8 GHz Max Power */ +#define SSB_SPROM4_5GH_MAXP 0x00FF +#define SSB_SPROM4_5GL_MAXP 0xFF00 +#define SSB_SPROM4_5GL_MAXP_SHIFT 8 +#define SSB_SPROM4_5G_PA_0 0x0E /* 5.3 GHz power amp */ +#define SSB_SPROM4_5G_PA_1 0x10 +#define SSB_SPROM4_5G_PA_2 0x12 +#define SSB_SPROM4_5G_PA_3 0x14 +#define SSB_SPROM4_5GL_PA_0 0x16 /* 5.2 GHz power amp */ +#define SSB_SPROM4_5GL_PA_1 0x18 +#define SSB_SPROM4_5GL_PA_2 0x1A +#define SSB_SPROM4_5GL_PA_3 0x1C +#define SSB_SPROM4_5GH_PA_0 0x1E /* 5.8 GHz power amp */ +#define SSB_SPROM4_5GH_PA_1 0x20 +#define SSB_SPROM4_5GH_PA_2 0x22 +#define SSB_SPROM4_5GH_PA_3 0x24 + +/* TODO: Make it deprecated */ #define SSB_SPROM4_MAXP_BG 0x0080 /* Max Power BG in path 1 */ #define SSB_SPROM4_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */ #define SSB_SPROM4_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ -- cgit v1.2.3 From d1d3799fcb1037357b54be44e796a6253484268e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Tue, 15 Jul 2014 19:44:28 +0200 Subject: bcma: add support for BCM43217 found in Tenda W322E (14e4:43a9) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- include/linux/bcma/bcma.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index 452286a38b2b..7cb2344741cf 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -158,6 +158,7 @@ struct bcma_host_ops { /* Chip IDs of PCIe devices */ #define BCMA_CHIP_ID_BCM4313 0x4313 #define BCMA_CHIP_ID_BCM43142 43142 +#define BCMA_CHIP_ID_BCM43217 43217 #define BCMA_CHIP_ID_BCM43224 43224 #define BCMA_PKG_ID_BCM43224_FAB_CSM 0x8 #define BCMA_PKG_ID_BCM43224_FAB_SMIC 0xa -- cgit v1.2.3 From c2cb2c4cf1a089501242a1701b589d2ad5eb0448 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Thu, 17 Jul 2014 19:31:05 +0200 Subject: b43: use one shared function for setting MAC frequency MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit By the way add few chipsets that were tracked with "wl" dumps. Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- include/linux/bcma/bcma.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index 7cb2344741cf..969af0f2bdf9 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -159,6 +159,7 @@ struct bcma_host_ops { #define BCMA_CHIP_ID_BCM4313 0x4313 #define BCMA_CHIP_ID_BCM43142 43142 #define BCMA_CHIP_ID_BCM43217 43217 +#define BCMA_CHIP_ID_BCM43222 43222 #define BCMA_CHIP_ID_BCM43224 43224 #define BCMA_PKG_ID_BCM43224_FAB_CSM 0x8 #define BCMA_PKG_ID_BCM43224_FAB_SMIC 0xa -- cgit v1.2.3 From c6f854d57d704a97adbf952ef0948acc68f3312c Mon Sep 17 00:00:00 2001 From: Veaceslav Falico Date: Thu, 17 Jul 2014 19:46:09 +0200 Subject: net: use dev->name in netdev_pr* when it's available netdev_name() returns dev->name only when the net_device is in NETREG_REGISTERED state. However, dev->name is always populated on creation, so we can easily use it. There are two cases when there's no real name - when it's an empty string or when the name is in form of "eth%d", then netdev_name() returns "unnamed net_device". CC: "David S. Miller" CC: Tom Gundersen Signed-off-by: Veaceslav Falico Acked-by: Tom Gundersen Signed-off-by: David S. Miller --- include/linux/netdevice.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 15ed750458ad..70256aa2ae81 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -3383,8 +3383,8 @@ extern struct pernet_operations __net_initdata loopback_net_ops; static inline const char *netdev_name(const struct net_device *dev) { - if (dev->reg_state != NETREG_REGISTERED) - return "(unregistered net_device)"; + if (!dev->name[0] || strchr(dev->name, '%')) + return "(unnamed net_device)"; return dev->name; } -- cgit v1.2.3 From ccc7f4968a18b980994e622006b84e0195754390 Mon Sep 17 00:00:00 2001 From: Veaceslav Falico Date: Thu, 17 Jul 2014 19:46:10 +0200 Subject: net: print net_device reg_state in netdev_* unless it's registered This way we'll always know in what status the device is, unless it's running normally (i.e. NETDEV_REGISTERED). Also, emit a warning once in case of a bad reg_state. CC: "David S. Miller" CC: Jason Baron CC: Eric Dumazet CC: Vlad Yasevich CC: stephen hemminger CC: Jerry Chu CC: Ben Hutchings CC: Joe Perches Signed-off-by: Veaceslav Falico Signed-off-by: David S. Miller --- include/linux/netdevice.h | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 70256aa2ae81..8e8fb3ed574b 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -3388,6 +3388,21 @@ static inline const char *netdev_name(const struct net_device *dev) return dev->name; } +static inline const char *netdev_reg_state(const struct net_device *dev) +{ + switch (dev->reg_state) { + case NETREG_UNINITIALIZED: return " (uninitialized)"; + case NETREG_REGISTERED: return ""; + case NETREG_UNREGISTERING: return " (unregistering)"; + case NETREG_UNREGISTERED: return " (unregistered)"; + case NETREG_RELEASED: return " (released)"; + case NETREG_DUMMY: return " (dummy)"; + } + + WARN_ONCE(1, "%s: unknown reg_state %d\n", dev->name, dev->reg_state); + return " (unknown)"; +} + __printf(3, 4) int netdev_printk(const char *level, const struct net_device *dev, const char *format, ...); @@ -3444,7 +3459,8 @@ do { \ * file/line information and a backtrace. */ #define netdev_WARN(dev, format, args...) \ - WARN(1, "netdevice: %s\n" format, netdev_name(dev), ##args) + WARN(1, "netdevice: %s%s\n" format, netdev_name(dev), \ + netdev_reg_state(dev), ##args) /* netif printk helpers, similar to netdev_printk */ -- cgit v1.2.3 From 6f7eaa47e1de30159277f91f1145a6687f13ffd9 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Thu, 17 Jul 2014 17:14:24 +0300 Subject: mac80211: add TDLS QoS param IE on setup-confirm When TDLS QoS is supported by the the peer and the local card, add the WMM parameter IE to the setup-confirm frame. Take the QoS settings from the current AP, or if unsupported, use the default values from the specification. This behavior is mandated by IEEE802.11-2012 section 10.22.4. Signed-off-by: Arik Nemtsov Reviewed-by: Liad Kaufman Reviewed-by: Johannes Berg Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 75d17e15da33..63ab3873c5ed 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1001,6 +1001,26 @@ struct ieee80211_vendor_ie { u8 oui_type; } __packed; +struct ieee80211_wmm_ac_param { + u8 aci_aifsn; /* AIFSN, ACM, ACI */ + u8 cw; /* ECWmin, ECWmax (CW = 2^ECW - 1) */ + __le16 txop_limit; +} __packed; + +struct ieee80211_wmm_param_ie { + u8 element_id; /* Element ID: 221 (0xdd); */ + u8 len; /* Length: 24 */ + /* required fields for WMM version 1 */ + u8 oui[3]; /* 00:50:f2 */ + u8 oui_type; /* 2 */ + u8 oui_subtype; /* 1 */ + u8 version; /* 1 for WMM version 1.0 */ + u8 qos_info; /* AP/STA specific QoS info */ + u8 reserved; /* 0 */ + /* AC_BE, AC_BK, AC_VI, AC_VO */ + struct ieee80211_wmm_ac_param ac[4]; +} __packed; + /* Control frames */ struct ieee80211_rts { __le16 frame_control; -- cgit v1.2.3 From 0bec8c88dc2b076a0a4a0437e1e878026cbaccb4 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Tue, 22 Jul 2014 12:06:23 +0200 Subject: net: skbuff: Use ALIGN macro instead of open coding it Use ALIGN from linux/kernel.h to define SKB_DATA_ALIGN instead of open coding it. Signed-off-by: Tobias Klauser Signed-off-by: David S. Miller --- include/linux/skbuff.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 369430340ed9..b613557132b9 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -112,8 +112,7 @@ #define CHECKSUM_COMPLETE 2 #define CHECKSUM_PARTIAL 3 -#define SKB_DATA_ALIGN(X) (((X) + (SMP_CACHE_BYTES - 1)) & \ - ~(SMP_CACHE_BYTES - 1)) +#define SKB_DATA_ALIGN(X) ALIGN(X, SMP_CACHE_BYTES) #define SKB_WITH_OVERHEAD(X) \ ((X) - SKB_DATA_ALIGN(sizeof(struct skb_shared_info))) #define SKB_MAX_ORDER(X, ORDER) \ -- cgit v1.2.3 From 35630df68d6030daf12dde12ed07bbe26324e6ac Mon Sep 17 00:00:00 2001 From: Christophe Ricard Date: Sun, 25 May 2014 22:35:38 +0200 Subject: NFC: st21nfcb: Add driver for STMicroelectronics ST21NFCB NFC chip Add driver for STMicroelectronics ST21NFCB NFC controller. ST21NFCB is using NCI protocol and a proprietary low level transport protocol called NDLC used on top. NDLC: The protocol defines 2 types of frame: - One type carrying NCI data (referred as DATAFRAME frames). - One type carrying protocol information used for flow control and error control mechanisms (referred as SUPERVISOR frames). After each frame transmission to the NFC controller, the device host SHALL waitfor an ACK (SUPERVISOR frame) reception before sending a new frame. The NFC controller MAY send a frame at anytime to the device host. The NFC controller MAY send a specific WAIT supervisor frame to indicate to device host that a NCI data packet has been received but that it could take significant time before the NFC controller sends an ACK and thus allows next data reception. Signed-off-by: Christophe Ricard Signed-off-by: Samuel Ortiz --- include/linux/platform_data/st21nfcb.h | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) create mode 100644 include/linux/platform_data/st21nfcb.h (limited to 'include/linux') diff --git a/include/linux/platform_data/st21nfcb.h b/include/linux/platform_data/st21nfcb.h new file mode 100644 index 000000000000..2a7b769c714d --- /dev/null +++ b/include/linux/platform_data/st21nfcb.h @@ -0,0 +1,32 @@ +/* + * Driver include for the ST21NFCB NFC chip. + * + * Copyright (C) 2014 STMicroelectronics SAS. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see . + */ + +#ifndef _ST21NFCA_HCI_H_ +#define _ST21NFCA_HCI_H_ + +#include + +#define ST21NFCB_NCI_DRIVER_NAME "st21nfcb_nci" + +struct st21nfcb_nfc_platform_data { + unsigned int gpio_irq; + unsigned int gpio_reset; + unsigned int irq_polarity; +}; + +#endif /* _ST21NFCA_HCI_H_ */ -- cgit v1.2.3 From fb92ff78f85b6c1a6f1277f7dd04a3762ba725ef Mon Sep 17 00:00:00 2001 From: Christophe Ricard Date: Sun, 25 May 2014 22:46:58 +0200 Subject: NFC: st21nfcb: few code clean up Signed-off-by: Christophe Ricard Signed-off-by: Samuel Ortiz --- include/linux/platform_data/st21nfcb.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/platform_data/st21nfcb.h b/include/linux/platform_data/st21nfcb.h index 2a7b769c714d..2d11f1f5efab 100644 --- a/include/linux/platform_data/st21nfcb.h +++ b/include/linux/platform_data/st21nfcb.h @@ -16,8 +16,8 @@ * along with this program; if not, see . */ -#ifndef _ST21NFCA_HCI_H_ -#define _ST21NFCA_HCI_H_ +#ifndef _ST21NFCB_NCI_H_ +#define _ST21NFCB_NCI_H_ #include -- cgit v1.2.3 From 2599d8580f93f0794d2fa850501b1068ce1d0aa8 Mon Sep 17 00:00:00 2001 From: Amir Vadai Date: Tue, 22 Jul 2014 15:44:11 +0300 Subject: net/mlx4_core: Use low memory profile on kdump kernel When running in kdump kernel, reduce number of resources allocated for the hardware. This will enable the NIC to operate in this low memory environment at the expense of performance and some features not related to the basic NIC functionality. Signed-off-by: Amir Vadai Signed-off-by: David S. Miller --- include/linux/mlx4/device.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index fa660aedb822..e15b1544ea83 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -1254,4 +1254,11 @@ int mlx4_vf_smi_enabled(struct mlx4_dev *dev, int slave, int port); int mlx4_vf_get_enable_smi_admin(struct mlx4_dev *dev, int slave, int port); int mlx4_vf_set_enable_smi_admin(struct mlx4_dev *dev, int slave, int port, int enable); + +/* Returns true if running in low memory profile (kdump kernel) */ +static inline bool mlx4_low_memory_profile(void) +{ + return reset_devices; +} + #endif /* MLX4_DEVICE_H */ -- cgit v1.2.3 From f6eec614d2252a99b861e288b6301599d2d58da4 Mon Sep 17 00:00:00 2001 From: Pravin B Shelar Date: Thu, 17 Jul 2014 15:14:15 -0700 Subject: openvswitch: Enable tunnel GSO for OVS bridge. Following patch enables all available tunnel GSO features for OVS bridge device so that ovs can use hardware offloads available to underling device. Signed-off-by: Pravin B Shelar Acked-by: Andy Zhou --- include/linux/netdev_features.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netdev_features.h b/include/linux/netdev_features.h index d99800cbdcf3..dcfdecbfa0b7 100644 --- a/include/linux/netdev_features.h +++ b/include/linux/netdev_features.h @@ -176,4 +176,12 @@ enum { NETIF_F_HW_VLAN_STAG_RX | \ NETIF_F_HW_VLAN_STAG_TX) +#define NETIF_F_GSO_ENCAP_ALL (NETIF_F_GSO_GRE | \ + NETIF_F_GSO_GRE_CSUM | \ + NETIF_F_GSO_IPIP | \ + NETIF_F_GSO_SIT | \ + NETIF_F_GSO_UDP_TUNNEL | \ + NETIF_F_GSO_UDP_TUNNEL_CSUM | \ + NETIF_F_GSO_MPLS) + #endif /* _LINUX_NETDEV_FEATURES_H */ -- cgit v1.2.3 From 2695fb552cbef1029aa025a98acb80cc51d66de5 Mon Sep 17 00:00:00 2001 From: Alexei Starovoitov Date: Thu, 24 Jul 2014 16:38:21 -0700 Subject: net: filter: rename 'struct sock_filter_int' into 'struct bpf_insn' eBPF is used by socket filtering, seccomp and soon by tracing and exposed to userspace, therefore 'sock_filter_int' name is not accurate. Rename it to 'bpf_insn' Signed-off-by: Alexei Starovoitov Signed-off-by: David S. Miller --- include/linux/filter.h | 50 +++++++++++++++++++++++++------------------------- 1 file changed, 25 insertions(+), 25 deletions(-) (limited to 'include/linux') diff --git a/include/linux/filter.h b/include/linux/filter.h index c43c8258e682..20dd50ef7271 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -82,7 +82,7 @@ enum { /* ALU ops on registers, bpf_add|sub|...: dst_reg += src_reg */ #define BPF_ALU64_REG(OP, DST, SRC) \ - ((struct sock_filter_int) { \ + ((struct bpf_insn) { \ .code = BPF_ALU64 | BPF_OP(OP) | BPF_X, \ .dst_reg = DST, \ .src_reg = SRC, \ @@ -90,7 +90,7 @@ enum { .imm = 0 }) #define BPF_ALU32_REG(OP, DST, SRC) \ - ((struct sock_filter_int) { \ + ((struct bpf_insn) { \ .code = BPF_ALU | BPF_OP(OP) | BPF_X, \ .dst_reg = DST, \ .src_reg = SRC, \ @@ -100,7 +100,7 @@ enum { /* ALU ops on immediates, bpf_add|sub|...: dst_reg += imm32 */ #define BPF_ALU64_IMM(OP, DST, IMM) \ - ((struct sock_filter_int) { \ + ((struct bpf_insn) { \ .code = BPF_ALU64 | BPF_OP(OP) | BPF_K, \ .dst_reg = DST, \ .src_reg = 0, \ @@ -108,7 +108,7 @@ enum { .imm = IMM }) #define BPF_ALU32_IMM(OP, DST, IMM) \ - ((struct sock_filter_int) { \ + ((struct bpf_insn) { \ .code = BPF_ALU | BPF_OP(OP) | BPF_K, \ .dst_reg = DST, \ .src_reg = 0, \ @@ -118,7 +118,7 @@ enum { /* Endianess conversion, cpu_to_{l,b}e(), {l,b}e_to_cpu() */ #define BPF_ENDIAN(TYPE, DST, LEN) \ - ((struct sock_filter_int) { \ + ((struct bpf_insn) { \ .code = BPF_ALU | BPF_END | BPF_SRC(TYPE), \ .dst_reg = DST, \ .src_reg = 0, \ @@ -128,7 +128,7 @@ enum { /* Short form of mov, dst_reg = src_reg */ #define BPF_MOV64_REG(DST, SRC) \ - ((struct sock_filter_int) { \ + ((struct bpf_insn) { \ .code = BPF_ALU64 | BPF_MOV | BPF_X, \ .dst_reg = DST, \ .src_reg = SRC, \ @@ -136,7 +136,7 @@ enum { .imm = 0 }) #define BPF_MOV32_REG(DST, SRC) \ - ((struct sock_filter_int) { \ + ((struct bpf_insn) { \ .code = BPF_ALU | BPF_MOV | BPF_X, \ .dst_reg = DST, \ .src_reg = SRC, \ @@ -146,7 +146,7 @@ enum { /* Short form of mov, dst_reg = imm32 */ #define BPF_MOV64_IMM(DST, IMM) \ - ((struct sock_filter_int) { \ + ((struct bpf_insn) { \ .code = BPF_ALU64 | BPF_MOV | BPF_K, \ .dst_reg = DST, \ .src_reg = 0, \ @@ -154,7 +154,7 @@ enum { .imm = IMM }) #define BPF_MOV32_IMM(DST, IMM) \ - ((struct sock_filter_int) { \ + ((struct bpf_insn) { \ .code = BPF_ALU | BPF_MOV | BPF_K, \ .dst_reg = DST, \ .src_reg = 0, \ @@ -164,7 +164,7 @@ enum { /* Short form of mov based on type, BPF_X: dst_reg = src_reg, BPF_K: dst_reg = imm32 */ #define BPF_MOV64_RAW(TYPE, DST, SRC, IMM) \ - ((struct sock_filter_int) { \ + ((struct bpf_insn) { \ .code = BPF_ALU64 | BPF_MOV | BPF_SRC(TYPE), \ .dst_reg = DST, \ .src_reg = SRC, \ @@ -172,7 +172,7 @@ enum { .imm = IMM }) #define BPF_MOV32_RAW(TYPE, DST, SRC, IMM) \ - ((struct sock_filter_int) { \ + ((struct bpf_insn) { \ .code = BPF_ALU | BPF_MOV | BPF_SRC(TYPE), \ .dst_reg = DST, \ .src_reg = SRC, \ @@ -182,7 +182,7 @@ enum { /* Direct packet access, R0 = *(uint *) (skb->data + imm32) */ #define BPF_LD_ABS(SIZE, IMM) \ - ((struct sock_filter_int) { \ + ((struct bpf_insn) { \ .code = BPF_LD | BPF_SIZE(SIZE) | BPF_ABS, \ .dst_reg = 0, \ .src_reg = 0, \ @@ -192,7 +192,7 @@ enum { /* Indirect packet access, R0 = *(uint *) (skb->data + src_reg + imm32) */ #define BPF_LD_IND(SIZE, SRC, IMM) \ - ((struct sock_filter_int) { \ + ((struct bpf_insn) { \ .code = BPF_LD | BPF_SIZE(SIZE) | BPF_IND, \ .dst_reg = 0, \ .src_reg = SRC, \ @@ -202,7 +202,7 @@ enum { /* Memory load, dst_reg = *(uint *) (src_reg + off16) */ #define BPF_LDX_MEM(SIZE, DST, SRC, OFF) \ - ((struct sock_filter_int) { \ + ((struct bpf_insn) { \ .code = BPF_LDX | BPF_SIZE(SIZE) | BPF_MEM, \ .dst_reg = DST, \ .src_reg = SRC, \ @@ -212,7 +212,7 @@ enum { /* Memory store, *(uint *) (dst_reg + off16) = src_reg */ #define BPF_STX_MEM(SIZE, DST, SRC, OFF) \ - ((struct sock_filter_int) { \ + ((struct bpf_insn) { \ .code = BPF_STX | BPF_SIZE(SIZE) | BPF_MEM, \ .dst_reg = DST, \ .src_reg = SRC, \ @@ -222,7 +222,7 @@ enum { /* Memory store, *(uint *) (dst_reg + off16) = imm32 */ #define BPF_ST_MEM(SIZE, DST, OFF, IMM) \ - ((struct sock_filter_int) { \ + ((struct bpf_insn) { \ .code = BPF_ST | BPF_SIZE(SIZE) | BPF_MEM, \ .dst_reg = DST, \ .src_reg = 0, \ @@ -232,7 +232,7 @@ enum { /* Conditional jumps against registers, if (dst_reg 'op' src_reg) goto pc + off16 */ #define BPF_JMP_REG(OP, DST, SRC, OFF) \ - ((struct sock_filter_int) { \ + ((struct bpf_insn) { \ .code = BPF_JMP | BPF_OP(OP) | BPF_X, \ .dst_reg = DST, \ .src_reg = SRC, \ @@ -242,7 +242,7 @@ enum { /* Conditional jumps against immediates, if (dst_reg 'op' imm32) goto pc + off16 */ #define BPF_JMP_IMM(OP, DST, IMM, OFF) \ - ((struct sock_filter_int) { \ + ((struct bpf_insn) { \ .code = BPF_JMP | BPF_OP(OP) | BPF_K, \ .dst_reg = DST, \ .src_reg = 0, \ @@ -252,7 +252,7 @@ enum { /* Function call */ #define BPF_EMIT_CALL(FUNC) \ - ((struct sock_filter_int) { \ + ((struct bpf_insn) { \ .code = BPF_JMP | BPF_CALL, \ .dst_reg = 0, \ .src_reg = 0, \ @@ -262,7 +262,7 @@ enum { /* Raw code statement block */ #define BPF_RAW_INSN(CODE, DST, SRC, OFF, IMM) \ - ((struct sock_filter_int) { \ + ((struct bpf_insn) { \ .code = CODE, \ .dst_reg = DST, \ .src_reg = SRC, \ @@ -272,7 +272,7 @@ enum { /* Program exit */ #define BPF_EXIT_INSN() \ - ((struct sock_filter_int) { \ + ((struct bpf_insn) { \ .code = BPF_JMP | BPF_EXIT, \ .dst_reg = 0, \ .src_reg = 0, \ @@ -298,7 +298,7 @@ enum { /* Macro to invoke filter function. */ #define SK_RUN_FILTER(filter, ctx) (*filter->bpf_func)(ctx, filter->insnsi) -struct sock_filter_int { +struct bpf_insn { __u8 code; /* opcode */ __u8 dst_reg:4; /* dest register */ __u8 src_reg:4; /* source register */ @@ -330,10 +330,10 @@ struct sk_filter { struct sock_fprog_kern *orig_prog; /* Original BPF program */ struct rcu_head rcu; unsigned int (*bpf_func)(const struct sk_buff *skb, - const struct sock_filter_int *filter); + const struct bpf_insn *filter); union { struct sock_filter insns[0]; - struct sock_filter_int insnsi[0]; + struct bpf_insn insnsi[0]; struct work_struct work; }; }; @@ -353,7 +353,7 @@ void sk_filter_select_runtime(struct sk_filter *fp); void sk_filter_free(struct sk_filter *fp); int sk_convert_filter(struct sock_filter *prog, int len, - struct sock_filter_int *new_prog, int *new_len); + struct bpf_insn *new_prog, int *new_len); int sk_unattached_filter_create(struct sk_filter **pfp, struct sock_fprog_kern *fprog); -- cgit v1.2.3 From a67d19d4c5b92853550dc20f4afce8c914a8ea0b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Thu, 24 Jul 2014 15:29:18 +0200 Subject: b43: add support for BCM43131 chipset with N-PHY rev 17 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It contains radio 0x2057 rev 14 just like a BCM43217, so it doesn't require any magic. The main difference is that BCM4313 is 1x1:1. Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- include/linux/bcma/bcma.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index 969af0f2bdf9..70b8d88b3982 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -158,6 +158,7 @@ struct bcma_host_ops { /* Chip IDs of PCIe devices */ #define BCMA_CHIP_ID_BCM4313 0x4313 #define BCMA_CHIP_ID_BCM43142 43142 +#define BCMA_CHIP_ID_BCM43131 43131 #define BCMA_CHIP_ID_BCM43217 43217 #define BCMA_CHIP_ID_BCM43222 43222 #define BCMA_CHIP_ID_BCM43224 43224 -- cgit v1.2.3 From 4d276eb6a478307a28ae843836c455bf04b37a3c Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Fri, 25 Jul 2014 18:01:32 -0400 Subject: net: remove deprecated syststamp timestamp The SO_TIMESTAMPING API defines three types of timestamps: software, hardware in raw format (hwtstamp) and hardware converted to system format (syststamp). The last has been deprecated in favor of combining hwtstamp with a PTP clock driver. There are no active users in the kernel. The option was device driver dependent. If set, but without hardware support, the correct behavior is to return zero in the relevant field in the SCM_TIMESTAMPING ancillary message. Without device drivers implementing the option, this field is effectively always zero. Remove the internal plumbing to dissuage new drivers from implementing the feature. Keep the SOF_TIMESTAMPING_SYS_HARDWARE flag, however, to avoid breaking existing applications that request the timestamp. Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller --- include/linux/skbuff.h | 14 +------------- 1 file changed, 1 insertion(+), 13 deletions(-) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index b613557132b9..281deced7469 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -210,20 +210,9 @@ static inline void skb_frag_size_sub(skb_frag_t *frag, int delta) * struct skb_shared_hwtstamps - hardware time stamps * @hwtstamp: hardware time stamp transformed into duration * since arbitrary point in time - * @syststamp: hwtstamp transformed to system time base (deprecated) * * Software time stamps generated by ktime_get_real() are stored in - * skb->tstamp. The relation between the different kinds of time - * stamps is as follows: - * - * syststamp and tstamp can be compared against each other in - * arbitrary combinations. The accuracy of a - * syststamp/tstamp/"syststamp from other device" comparison is - * limited by the accuracy of the transformation into system time - * base. This depends on the device driver and its underlying - * hardware. The syststamp implementation is deprecated in favor - * of hwtstamps and hw PTP clock sources exposed directly to - * userspace. + * skb->tstamp. * * hwtstamps can only be compared against other hwtstamps from * the same device. @@ -233,7 +222,6 @@ static inline void skb_frag_size_sub(skb_frag_t *frag, int delta) */ struct skb_shared_hwtstamps { ktime_t hwtstamp; - ktime_t syststamp; }; /* Definitions for tx_flags in struct skb_shared_info */ -- cgit v1.2.3 From 9603b61de1eee92977d74ff42541be20c0c5b1a7 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Mon, 28 Jul 2014 23:30:22 +0300 Subject: mlx5: Move pci device handling from mlx5_ib to mlx5_core In preparation for a new mlx5 device which is VPI (i.e., ports can be either IB or ETH), move the pci device functionality from mlx5_ib to mlx5_core. This involves the following changes: 1. Move mlx5_core_dev struct out of mlx5_ib_dev. mlx5_core_dev is now an independent structure maintained by mlx5_core. mlx5_ib_dev now has a pointer to that struct. This requires changing a lot of places where the core_dev struct was accessed via mlx5_ib_dev (now, this needs to be a pointer dereference). 2. All PCI initializations are now done in mlx5_core. Thus, it is now mlx5_core which does pci_register_device (and not mlx5_ib, as was previously). 3. mlx5_ib now registers itself with mlx5_core as an "interface" driver. This is very similar to the mechanism employed for the mlx4 (ConnectX) driver. Once the HCA is initialized (by mlx5_core), it invokes the interface drivers to do their initializations. 4. There is a new event handler which the core registers: mlx5_core_event(). This event handler invokes the event handlers registered by the interfaces. Based on a patch by Eli Cohen Signed-off-by: Jack Morgenstein Signed-off-by: Eli Cohen Signed-off-by: David S. Miller --- include/linux/mlx5/driver.h | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h index 2bce4aad2570..d0cb5984a45f 100644 --- a/include/linux/mlx5/driver.h +++ b/include/linux/mlx5/driver.h @@ -543,6 +543,10 @@ struct mlx5_priv { /* protect mkey key part */ spinlock_t mkey_lock; u8 mkey_key; + + struct list_head dev_list; + struct list_head ctx_list; + spinlock_t ctx_lock; }; struct mlx5_core_dev { @@ -686,8 +690,6 @@ static inline u32 mlx5_base_mkey(const u32 key) return key & 0xffffff00u; } -int mlx5_dev_init(struct mlx5_core_dev *dev, struct pci_dev *pdev); -void mlx5_dev_cleanup(struct mlx5_core_dev *dev); int mlx5_cmd_init(struct mlx5_core_dev *dev); void mlx5_cmd_cleanup(struct mlx5_core_dev *dev); void mlx5_cmd_use_events(struct mlx5_core_dev *dev); @@ -811,6 +813,17 @@ enum { MAX_MR_CACHE_ENTRIES = 16, }; +struct mlx5_interface { + void * (*add)(struct mlx5_core_dev *dev); + void (*remove)(struct mlx5_core_dev *dev, void *context); + void (*event)(struct mlx5_core_dev *dev, void *context, + enum mlx5_dev_event event, void *data); + struct list_head list; +}; + +int mlx5_register_interface(struct mlx5_interface *intf); +void mlx5_unregister_interface(struct mlx5_interface *intf); + struct mlx5_profile { u64 mask; u32 log_max_qp; -- cgit v1.2.3 From f241e7497ec2d22b83002b17ae91a851d4034cb7 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Mon, 28 Jul 2014 23:30:23 +0300 Subject: mlx5: minor fixes (mainly avoidance of hidden casts) There were many places where parameters which should be u8/u16 were integer type. Additionally, in 2 places, a check for a non-null pointer was added before dereferencing the pointer (this is actually a bug fix). Signed-off-by: Jack Morgenstein Signed-off-by: Eli Cohen Signed-off-by: David S. Miller --- include/linux/mlx5/device.h | 4 ---- include/linux/mlx5/driver.h | 8 ++++---- 2 files changed, 4 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mlx5/device.h b/include/linux/mlx5/device.h index 3406cfb1267a..334947151dfc 100644 --- a/include/linux/mlx5/device.h +++ b/include/linux/mlx5/device.h @@ -456,9 +456,6 @@ struct mlx5_eqe_cq_err { u8 syndrome; }; -struct mlx5_eqe_dropped_packet { -}; - struct mlx5_eqe_port_state { u8 reserved0[8]; u8 port; @@ -498,7 +495,6 @@ union ev_data { struct mlx5_eqe_comp comp; struct mlx5_eqe_qp_srq qp_srq; struct mlx5_eqe_cq_err cq_err; - struct mlx5_eqe_dropped_packet dp; struct mlx5_eqe_port_state port; struct mlx5_eqe_gpio gpio; struct mlx5_eqe_congestion cong; diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h index d0cb5984a45f..76de0cc41640 100644 --- a/include/linux/mlx5/driver.h +++ b/include/linux/mlx5/driver.h @@ -381,8 +381,8 @@ struct mlx5_buf { struct mlx5_buf_list *page_list; int nbufs; int npages; - int page_shift; int size; + u8 page_shift; }; struct mlx5_eq { @@ -736,7 +736,7 @@ int mlx5_core_dump_fill_mkey(struct mlx5_core_dev *dev, struct mlx5_core_mr *mr, int mlx5_core_alloc_pd(struct mlx5_core_dev *dev, u32 *pdn); int mlx5_core_dealloc_pd(struct mlx5_core_dev *dev, u32 pdn); int mlx5_core_mad_ifc(struct mlx5_core_dev *dev, void *inb, void *outb, - u16 opmod, int port); + u16 opmod, u8 port); void mlx5_pagealloc_init(struct mlx5_core_dev *dev); void mlx5_pagealloc_cleanup(struct mlx5_core_dev *dev); int mlx5_pagealloc_start(struct mlx5_core_dev *dev); @@ -769,7 +769,7 @@ void mlx5_qp_debugfs_cleanup(struct mlx5_core_dev *dev); int mlx5_core_access_reg(struct mlx5_core_dev *dev, void *data_in, int size_in, void *data_out, int size_out, u16 reg_num, int arg, int write); -int mlx5_set_port_caps(struct mlx5_core_dev *dev, int port_num, u32 caps); +int mlx5_set_port_caps(struct mlx5_core_dev *dev, u8 port_num, u32 caps); int mlx5_debug_eq_add(struct mlx5_core_dev *dev, struct mlx5_eq *eq); void mlx5_debug_eq_remove(struct mlx5_core_dev *dev, struct mlx5_eq *eq); @@ -826,7 +826,7 @@ void mlx5_unregister_interface(struct mlx5_interface *intf); struct mlx5_profile { u64 mask; - u32 log_max_qp; + u8 log_max_qp; struct { int size; int limit; -- cgit v1.2.3 From 4d2f9bbb654b91a262638ac2c84dcb169d014aa6 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Mon, 28 Jul 2014 23:30:24 +0300 Subject: mlx5: Adjust events to use unsigned long param instead of void * In the event flow, we currently pass only a port number in the void *data argument. Rather than pass a pointer to the event handlers, we should use an "unsigned long" parameter, and pass the port number value directly. In the future, if necessary for some events, we can use the unsigned long parameter to pass a pointer. Based on a patch by Eli Cohen Signed-off-by: Jack Morgenstein Signed-off-by: Eli Cohen Signed-off-by: David S. Miller --- include/linux/mlx5/driver.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h index 76de0cc41640..9f3a5476bb71 100644 --- a/include/linux/mlx5/driver.h +++ b/include/linux/mlx5/driver.h @@ -559,7 +559,7 @@ struct mlx5_core_dev { struct mlx5_init_seg __iomem *iseg; void (*event) (struct mlx5_core_dev *dev, enum mlx5_dev_event event, - void *data); + unsigned long param); struct mlx5_priv priv; struct mlx5_profile *profile; atomic_t num_qps; @@ -817,7 +817,7 @@ struct mlx5_interface { void * (*add)(struct mlx5_core_dev *dev); void (*remove)(struct mlx5_core_dev *dev, void *context); void (*event)(struct mlx5_core_dev *dev, void *context, - enum mlx5_dev_event event, void *data); + enum mlx5_dev_event event, unsigned long param); struct list_head list; }; -- cgit v1.2.3 From 0c1d77dfb56660329d639090352bf690d3c33466 Mon Sep 17 00:00:00 2001 From: Vince Bridgers Date: Tue, 29 Jul 2014 15:19:57 -0500 Subject: net: libphy: Add phy specific function to access mmd phy registers libphy was originally written assuming all phy devices support clause 45 access extensions to the mmd registers through the indirection registers located within the first 16 phy registers. This assumption is not true in all cases, and one specific example is the Micrel ksz9021 10/100/1000 Mbps phy. Using the stmmac driver, accessing the mmd registers to query and configure energy efficient Ethernet (EEE) features yielded unexpected behavior. This patch adds mmd access functions to the phy driver that can be overriden by the phy specific driver if the phy does not support this mechanism or uses it's own non-standard access mechanism. By default, the IEEE Compatible clause 45 access mechanism described in clause 22 is used. With this patch, EEE query/configure functions as expected using the stmmac and the Micrel ksz9021 phy. Signed-off-by: Vince Bridgers Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- include/linux/phy.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'include/linux') diff --git a/include/linux/phy.h b/include/linux/phy.h index 68041446c450..ed39956b5613 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -545,6 +545,24 @@ struct phy_driver { */ void (*link_change_notify)(struct phy_device *dev); + /* A function provided by a phy specific driver to override the + * the PHY driver framework support for reading a MMD register + * from the PHY. If not supported, return -1. This function is + * optional for PHY specific drivers, if not provided then the + * default MMD read function is used by the PHY framework. + */ + int (*read_mmd_indirect)(struct phy_device *dev, int ptrad, + int devnum, int regnum); + + /* A function provided by a phy specific driver to override the + * the PHY driver framework support for writing a MMD register + * from the PHY. This function is optional for PHY specific drivers, + * if not provided then the default MMD read function is used by + * the PHY framework. + */ + void (*write_mmd_indirect)(struct phy_device *dev, int ptrad, + int devnum, int regnum, u32 val); + struct device_driver driver; }; #define to_phy_driver(d) container_of(d, struct phy_driver, driver) -- cgit v1.2.3 From dc6be9f54a4ecb0a09765d1f515ed947d86b7528 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Wed, 30 Jul 2014 23:21:06 +0200 Subject: bcma: use NS prefix for names of Northstar specific cores MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It's cleaner and we don't have quite identical names like BCMA_CORE_PCIEG2 and BCMA_CORE_PCIE2. Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- include/linux/bcma/bcma.h | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'include/linux') diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index 70b8d88b3982..0272e49135d0 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -73,17 +73,17 @@ struct bcma_host_ops { /* Core-ID values. */ #define BCMA_CORE_OOB_ROUTER 0x367 /* Out of band */ #define BCMA_CORE_4706_CHIPCOMMON 0x500 -#define BCMA_CORE_PCIEG2 0x501 -#define BCMA_CORE_DMA 0x502 -#define BCMA_CORE_SDIO3 0x503 -#define BCMA_CORE_USB20 0x504 -#define BCMA_CORE_USB30 0x505 -#define BCMA_CORE_A9JTAG 0x506 -#define BCMA_CORE_DDR23 0x507 -#define BCMA_CORE_ROM 0x508 -#define BCMA_CORE_NAND 0x509 -#define BCMA_CORE_QSPI 0x50A -#define BCMA_CORE_CHIPCOMMON_B 0x50B +#define BCMA_CORE_NS_PCIEG2 0x501 +#define BCMA_CORE_NS_DMA 0x502 +#define BCMA_CORE_NS_SDIO3 0x503 +#define BCMA_CORE_NS_USB20 0x504 +#define BCMA_CORE_NS_USB30 0x505 +#define BCMA_CORE_NS_A9JTAG 0x506 +#define BCMA_CORE_NS_DDR23 0x507 +#define BCMA_CORE_NS_ROM 0x508 +#define BCMA_CORE_NS_NAND 0x509 +#define BCMA_CORE_NS_QSPI 0x50A +#define BCMA_CORE_NS_CHIPCOMMON_B 0x50B #define BCMA_CORE_4706_SOC_RAM 0x50E #define BCMA_CORE_ARMCA9 0x510 #define BCMA_CORE_4706_MAC_GBIT 0x52D -- cgit v1.2.3 From 3b57de958e2aa39abe020eb31bf19000d5899389 Mon Sep 17 00:00:00 2001 From: Vince Bridgers Date: Thu, 31 Jul 2014 15:49:17 -0500 Subject: net: stmmac: Support devicetree configs for mcast and ucast filter entries This patch adds and modifies code to support multiple Multicast and Unicast Synopsys MAC filter configurations. The default configuration is defined to support legacy driver behavior, which is 64 Multicast bins. The Unicast filter code previously assumed all controllers support 32 or 16 Unicast addresses based on controller version number, but this has been corrected to support a default of 1 Unicast address. The filter configuration may be specified through the devicetree using a Synopsys specific device tree entry. This information was verified with Synopsys through Synopsys Support Case #8000684337 and shared with the maintainer. Signed-off-by: Vince Bridgers Signed-off-by: David S. Miller --- include/linux/stmmac.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h index 6f27d4f957bd..cd63851b57f2 100644 --- a/include/linux/stmmac.h +++ b/include/linux/stmmac.h @@ -112,6 +112,8 @@ struct plat_stmmacenet_data { int riwt_off; int max_speed; int maxmtu; + int multicast_filter_bins; + int unicast_filter_entries; void (*fix_mac_speed)(void *priv, unsigned int speed); void (*bus_setup)(void __iomem *ioaddr); void *(*setup)(struct platform_device *pdev); -- cgit v1.2.3 From 536721b1cb3fb50034bf6f6c7a7ea16166970e69 Mon Sep 17 00:00:00 2001 From: Karoly Kemeny Date: Wed, 30 Jul 2014 20:27:36 +0200 Subject: net: kernel-doc compliant documentation for net_device Net_device is a vast and important structure, but it has no kernel-doc compliant documentation. This patch extracts the comments from the structure to clean it up, and let the scripts extract documentation from it. I know that the patch is big, but it's just reordering of comments into the appropriate form, and adding a few more, for the missing members. Signed-off-by: Karoly Kemeny Acked-by: Randy Dunlap Signed-off-by: David S. Miller --- include/linux/netdevice.h | 381 ++++++++++++++++++++++++++++++---------------- 1 file changed, 250 insertions(+), 131 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 8e8fb3ed574b..38377392d082 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1231,42 +1231,228 @@ enum netdev_priv_flags { #define IFF_LIVE_ADDR_CHANGE IFF_LIVE_ADDR_CHANGE #define IFF_MACVLAN IFF_MACVLAN -/* - * The DEVICE structure. - * Actually, this whole structure is a big mistake. It mixes I/O - * data with strictly "high-level" data, and it has to know about - * almost every data structure used in the INET module. +/** + * struct net_device - The DEVICE structure. + * Actually, this whole structure is a big mistake. It mixes I/O + * data with strictly "high-level" data, and it has to know about + * almost every data structure used in the INET module. + * + * @name: This is the first field of the "visible" part of this structure + * (i.e. as seen by users in the "Space.c" file). It is the name + * of the interface. + * + * @name_hlist: Device name hash chain, please keep it close to name[] + * @ifalias: SNMP alias + * @mem_end: Shared memory end + * @mem_start: Shared memory start + * @base_addr: Device I/O address + * @irq: Device IRQ number + * + * @state: Generic network queuing layer state, see netdev_state_t + * @dev_list: The global list of network devices + * @napi_list: List entry, that is used for polling napi devices + * @unreg_list: List entry, that is used, when we are unregistering the + * device, see the function unregister_netdev + * @close_list: List entry, that is used, when we are closing the device + * + * @adj_list: Directly linked devices, like slaves for bonding + * @all_adj_list: All linked devices, *including* neighbours + * @features: Currently active device features + * @hw_features: User-changeable features + * + * @wanted_features: User-requested features + * @vlan_features: Mask of features inheritable by VLAN devices + * + * @hw_enc_features: Mask of features inherited by encapsulating devices + * This field indicates what encapsulation + * offloads the hardware is capable of doing, + * and drivers will need to set them appropriately. + * + * @mpls_features: Mask of features inheritable by MPLS + * + * @ifindex: interface index + * @iflink: unique device identifier + * + * @stats: Statistics struct, which was left as a legacy, use + * rtnl_link_stats64 instead + * + * @rx_dropped: Dropped packets by core network, + * do not use this in drivers + * @tx_dropped: Dropped packets by core network, + * do not use this in drivers + * + * @carrier_changes: Stats to monitor carrier on<->off transitions + * + * @wireless_handlers: List of functions to handle Wireless Extensions, + * instead of ioctl, + * see for details. + * @wireless_data: Instance data managed by the core of wireless extensions + * + * @netdev_ops: Includes several pointers to callbacks, + * if one wants to override the ndo_*() functions + * @ethtool_ops: Management operations + * @fwd_ops: Management operations + * @header_ops: Includes callbacks for creating,parsing,rebuilding,etc + * of Layer 2 headers. + * + * @flags: Interface flags (a la BSD) + * @priv_flags: Like 'flags' but invisible to userspace, + * see if.h for the definitions + * @gflags: Global flags ( kept as legacy ) + * @padded: How much padding added by alloc_netdev() + * @operstate: RFC2863 operstate + * @link_mode: Mapping policy to operstate + * @if_port: Selectable AUI, TP, ... + * @dma: DMA channel + * @mtu: Interface MTU value + * @type: Interface hardware type + * @hard_header_len: Hardware header length + * + * @needed_headroom: Extra headroom the hardware may need, but not in all + * cases can this be guaranteed + * @needed_tailroom: Extra tailroom the hardware may need, but not in all + * cases can this be guaranteed. Some cases also use + * LL_MAX_HEADER instead to allocate the skb + * + * interface address info: + * + * @perm_addr: Permanent hw address + * @addr_assign_type: Hw address assignment type + * @addr_len: Hardware address length + * @neigh_priv_len; Used in neigh_alloc(), + * initialized only in atm/clip.c + * @dev_id: Used to differentiate devices that share + * the same link layer address + * @dev_port: Used to differentiate devices that share + * the same function + * @addr_list_lock: XXX: need comments on this one + * @uc: unicast mac addresses + * @mc: multicast mac addresses + * @dev_addrs: list of device hw addresses + * @queues_kset: Group of all Kobjects in the Tx and RX queues + * @uc_promisc: Counter, that indicates, that promiscuous mode + * has been enabled due to the need to listen to + * additional unicast addresses in a device that + * does not implement ndo_set_rx_mode() + * @promiscuity: Number of times, the NIC is told to work in + * Promiscuous mode, if it becomes 0 the NIC will + * exit from working in Promiscuous mode + * @allmulti: Counter, enables or disables allmulticast mode + * + * @vlan_info: VLAN info + * @dsa_ptr: dsa specific data + * @tipc_ptr: TIPC specific data + * @atalk_ptr: AppleTalk link + * @ip_ptr: IPv4 specific data + * @dn_ptr: DECnet specific data + * @ip6_ptr: IPv6 specific data + * @ax25_ptr: AX.25 specific data + * @ieee80211_ptr: IEEE 802.11 specific data, assign before registering + * + * @last_rx: Time of last Rx + * @dev_addr: Hw address (before bcast, + * because most packets are unicast) + * + * @_rx: Array of RX queues + * @num_rx_queues: Number of RX queues + * allocated at register_netdev() time + * @real_num_rx_queues: Number of RX queues currently active in device + * + * @rx_handler: handler for received packets + * @rx_handler_data: XXX: need comments on this one + * @ingress_queue: XXX: need comments on this one + * @broadcast: hw bcast address + * + * @_tx: Array of TX queues + * @num_tx_queues: Number of TX queues allocated at alloc_netdev_mq() time + * @real_num_tx_queues: Number of TX queues currently active in device + * @qdisc: Root qdisc from userspace point of view + * @tx_queue_len: Max frames per queue allowed + * @tx_global_lock: XXX: need comments on this one + * + * @xps_maps: XXX: need comments on this one + * + * @rx_cpu_rmap: CPU reverse-mapping for RX completion interrupts, + * indexed by RX queue number. Assigned by driver. + * This must only be set if the ndo_rx_flow_steer + * operation is defined + * + * @trans_start: Time (in jiffies) of last Tx + * @watchdog_timeo: Represents the timeout that is used by + * the watchdog ( see dev_watchdog() ) + * @watchdog_timer: List of timers + * + * @pcpu_refcnt: Number of references to this device + * @todo_list: Delayed register/unregister + * @index_hlist: Device index hash chain + * @link_watch_list: XXX: need comments on this one + * + * @reg_state: Register/unregister state machine + * @dismantle: Device is going to be freed + * @rtnl_link_state: This enum represents the phases of creating + * a new link + * + * @destructor: Called from unregister, + * can be used to call free_netdev + * @npinfo: XXX: need comments on this one + * @nd_net: Network namespace this network device is inside + * + * @ml_priv: Mid-layer private + * @lstats: Loopback statistics + * @tstats: Tunnel statistics + * @dstats: Dummy statistics + * @vstats: Virtual ethernet statistics + * + * @garp_port: GARP + * @mrp_port: MRP + * + * @dev: Class/net/name entry + * @sysfs_groups: Space for optional device, statistics and wireless + * sysfs groups + * + * @sysfs_rx_queue_group: Space for optional per-rx queue attributes + * @rtnl_link_ops: Rtnl_link_ops + * + * @gso_max_size: Maximum size of generic segmentation offload + * @gso_max_segs: Maximum number of segments that can be passed to the + * NIC for GSO + * + * @dcbnl_ops: Data Center Bridging netlink ops + * @num_tc: Number of traffic classes in the net device + * @tc_to_txq: XXX: need comments on this one + * @prio_tc_map XXX: need comments on this one + * + * @fcoe_ddp_xid: Max exchange id for FCoE LRO by ddp + * + * @priomap: XXX: need comments on this one + * @phydev: Physical device may attach itself + * for hardware timestamping + * + * @qdisc_tx_busylock: XXX: need comments on this one + * + * @group: The group, that the device belongs to + * @pm_qos_req: Power Management QoS object * * FIXME: cleanup struct net_device such that network protocol info * moves out. */ struct net_device { - - /* - * This is the first field of the "visible" part of this structure - * (i.e. as seen by users in the "Space.c" file). It is the name - * of the interface. - */ char name[IFNAMSIZ]; - - /* device name hash chain, please keep it close to name[] */ struct hlist_node name_hlist; - - /* snmp alias */ char *ifalias; - /* * I/O specific fields * FIXME: Merge these and struct ifmap into one */ - unsigned long mem_end; /* shared mem end */ - unsigned long mem_start; /* shared mem start */ - unsigned long base_addr; /* device I/O address */ - int irq; /* device IRQ number */ + unsigned long mem_end; + unsigned long mem_start; + unsigned long base_addr; + int irq; /* - * Some hardware also needs these fields, but they are not + * Some hardware also needs these fields (state,dev_list, + * napi_list,unreg_list,close_list) but they are not * part of the usual set specified in Space.c. */ @@ -1277,106 +1463,74 @@ struct net_device { struct list_head unreg_list; struct list_head close_list; - /* directly linked devices, like slaves for bonding */ struct { struct list_head upper; struct list_head lower; } adj_list; - /* all linked devices, *including* neighbours */ struct { struct list_head upper; struct list_head lower; } all_adj_list; - - /* currently active device features */ netdev_features_t features; - /* user-changeable features */ netdev_features_t hw_features; - /* user-requested features */ netdev_features_t wanted_features; - /* mask of features inheritable by VLAN devices */ netdev_features_t vlan_features; - /* mask of features inherited by encapsulating devices - * This field indicates what encapsulation offloads - * the hardware is capable of doing, and drivers will - * need to set them appropriately. - */ netdev_features_t hw_enc_features; - /* mask of fetures inheritable by MPLS */ netdev_features_t mpls_features; - /* Interface index. Unique device identifier */ int ifindex; int iflink; struct net_device_stats stats; - /* dropped packets by core network, Do not use this in drivers */ atomic_long_t rx_dropped; atomic_long_t tx_dropped; - /* Stats to monitor carrier on<->off transitions */ atomic_t carrier_changes; #ifdef CONFIG_WIRELESS_EXT - /* List of functions to handle Wireless Extensions (instead of ioctl). - * See for details. Jean II */ const struct iw_handler_def * wireless_handlers; - /* Instance data managed by the core of Wireless Extensions. */ struct iw_public_data * wireless_data; #endif - /* Management operations */ const struct net_device_ops *netdev_ops; const struct ethtool_ops *ethtool_ops; const struct forwarding_accel_ops *fwd_ops; - /* Hardware header description */ const struct header_ops *header_ops; - unsigned int flags; /* interface flags (a la BSD) */ - unsigned int priv_flags; /* Like 'flags' but invisible to userspace. - * See if.h for definitions. */ + unsigned int flags; + unsigned int priv_flags; + unsigned short gflags; - unsigned short padded; /* How much padding added by alloc_netdev() */ + unsigned short padded; - unsigned char operstate; /* RFC2863 operstate */ - unsigned char link_mode; /* mapping policy to operstate */ + unsigned char operstate; + unsigned char link_mode; - unsigned char if_port; /* Selectable AUI, TP,..*/ - unsigned char dma; /* DMA channel */ + unsigned char if_port; + unsigned char dma; - unsigned int mtu; /* interface MTU value */ - unsigned short type; /* interface hardware type */ - unsigned short hard_header_len; /* hardware hdr length */ + unsigned int mtu; + unsigned short type; + unsigned short hard_header_len; - /* extra head- and tailroom the hardware may need, but not in all cases - * can this be guaranteed, especially tailroom. Some cases also use - * LL_MAX_HEADER instead to allocate the skb. - */ unsigned short needed_headroom; unsigned short needed_tailroom; /* Interface address info. */ - unsigned char perm_addr[MAX_ADDR_LEN]; /* permanent hw address */ - unsigned char addr_assign_type; /* hw address assignment type */ - unsigned char addr_len; /* hardware address length */ + unsigned char perm_addr[MAX_ADDR_LEN]; + unsigned char addr_assign_type; + unsigned char addr_len; unsigned short neigh_priv_len; - unsigned short dev_id; /* Used to differentiate devices - * that share the same link - * layer address - */ - unsigned short dev_port; /* Used to differentiate - * devices that share the same - * function - */ + unsigned short dev_id; + unsigned short dev_port; spinlock_t addr_list_lock; - struct netdev_hw_addr_list uc; /* Unicast mac addresses */ - struct netdev_hw_addr_list mc; /* Multicast mac addresses */ - struct netdev_hw_addr_list dev_addrs; /* list of device - * hw addresses - */ + struct netdev_hw_addr_list uc; + struct netdev_hw_addr_list mc; + struct netdev_hw_addr_list dev_addrs; + #ifdef CONFIG_SYSFS struct kset *queues_kset; #endif @@ -1391,40 +1545,34 @@ struct net_device { /* Protocol specific pointers */ #if IS_ENABLED(CONFIG_VLAN_8021Q) - struct vlan_info __rcu *vlan_info; /* VLAN info */ + struct vlan_info __rcu *vlan_info; #endif #if IS_ENABLED(CONFIG_NET_DSA) - struct dsa_switch_tree *dsa_ptr; /* dsa specific data */ + struct dsa_switch_tree *dsa_ptr; #endif #if IS_ENABLED(CONFIG_TIPC) - struct tipc_bearer __rcu *tipc_ptr; /* TIPC specific data */ + struct tipc_bearer __rcu *tipc_ptr; #endif - void *atalk_ptr; /* AppleTalk link */ - struct in_device __rcu *ip_ptr; /* IPv4 specific data */ - struct dn_dev __rcu *dn_ptr; /* DECnet specific data */ - struct inet6_dev __rcu *ip6_ptr; /* IPv6 specific data */ - void *ax25_ptr; /* AX.25 specific data */ - struct wireless_dev *ieee80211_ptr; /* IEEE 802.11 specific data, - assign before registering */ + void *atalk_ptr; + struct in_device __rcu *ip_ptr; + struct dn_dev __rcu *dn_ptr; + struct inet6_dev __rcu *ip6_ptr; + void *ax25_ptr; + struct wireless_dev *ieee80211_ptr; /* * Cache lines mostly used on receive path (including eth_type_trans()) */ - unsigned long last_rx; /* Time of last Rx */ + unsigned long last_rx; /* Interface address info used in eth_type_trans() */ - unsigned char *dev_addr; /* hw address, (before bcast - because most packets are - unicast) */ + unsigned char *dev_addr; #ifdef CONFIG_SYSFS struct netdev_rx_queue *_rx; - /* Number of RX queues allocated at register_netdev() time */ unsigned int num_rx_queues; - - /* Number of RX queues currently active in device */ unsigned int real_num_rx_queues; #endif @@ -1433,33 +1581,23 @@ struct net_device { void __rcu *rx_handler_data; struct netdev_queue __rcu *ingress_queue; - unsigned char broadcast[MAX_ADDR_LEN]; /* hw bcast add */ + unsigned char broadcast[MAX_ADDR_LEN]; /* * Cache lines mostly used on transmit path */ struct netdev_queue *_tx ____cacheline_aligned_in_smp; - - /* Number of TX queues allocated at alloc_netdev_mq() time */ unsigned int num_tx_queues; - - /* Number of TX queues currently active in device */ unsigned int real_num_tx_queues; - - /* root qdisc from userspace point of view */ struct Qdisc *qdisc; - - unsigned long tx_queue_len; /* Max frames per queue allowed */ + unsigned long tx_queue_len; spinlock_t tx_global_lock; #ifdef CONFIG_XPS struct xps_dev_maps __rcu *xps_maps; #endif #ifdef CONFIG_RFS_ACCEL - /* CPU reverse-mapping for RX completion interrupts, indexed - * by RX queue number. Assigned by driver. This must only be - * set if the ndo_rx_flow_steer operation is defined. */ struct cpu_rmap *rx_cpu_rmap; #endif @@ -1469,22 +1607,17 @@ struct net_device { * trans_start here is expensive for high speed devices on SMP, * please use netdev_queue->trans_start instead. */ - unsigned long trans_start; /* Time (in jiffies) of last Tx */ + unsigned long trans_start; - int watchdog_timeo; /* used by dev_watchdog() */ + int watchdog_timeo; struct timer_list watchdog_timer; - /* Number of references to this device */ int __percpu *pcpu_refcnt; - - /* delayed register/unregister */ struct list_head todo_list; - /* device index hash chain */ - struct hlist_node index_hlist; + struct hlist_node index_hlist; struct list_head link_watch_list; - /* register/unregister state machine */ enum { NETREG_UNINITIALIZED=0, NETREG_REGISTERED, /* completed register_netdevice */ NETREG_UNREGISTERING, /* called unregister_netdevice */ @@ -1493,14 +1626,13 @@ struct net_device { NETREG_DUMMY, /* dummy device for NAPI poll */ } reg_state:8; - bool dismantle; /* device is going do be freed */ + bool dismantle; enum { RTNL_LINK_INITIALIZED, RTNL_LINK_INITIALIZING, } rtnl_link_state:16; - /* Called from unregister, can be used to call free_netdev */ void (*destructor)(struct net_device *dev); #ifdef CONFIG_NETPOLL @@ -1508,31 +1640,25 @@ struct net_device { #endif #ifdef CONFIG_NET_NS - /* Network namespace this network device is inside */ struct net *nd_net; #endif /* mid-layer private */ union { - void *ml_priv; - struct pcpu_lstats __percpu *lstats; /* loopback stats */ + void *ml_priv; + struct pcpu_lstats __percpu *lstats; struct pcpu_sw_netstats __percpu *tstats; - struct pcpu_dstats __percpu *dstats; /* dummy stats */ - struct pcpu_vstats __percpu *vstats; /* veth stats */ + struct pcpu_dstats __percpu *dstats; + struct pcpu_vstats __percpu *vstats; }; - /* GARP */ + struct garp_port __rcu *garp_port; - /* MRP */ struct mrp_port __rcu *mrp_port; - /* class/net/name entry */ - struct device dev; - /* space for optional device, statistics, and wireless sysfs groups */ + struct device dev; const struct attribute_group *sysfs_groups[4]; - /* space for optional per-rx queue attributes */ const struct attribute_group *sysfs_rx_queue_group; - /* rtnetlink link ops */ const struct rtnl_link_ops *rtnl_link_ops; /* for setting kernel sock attribute on TCP connection setup */ @@ -1542,7 +1668,6 @@ struct net_device { u16 gso_max_segs; #ifdef CONFIG_DCB - /* Data Center Bridging netlink ops */ const struct dcbnl_rtnl_ops *dcbnl_ops; #endif u8 num_tc; @@ -1550,20 +1675,14 @@ struct net_device { u8 prio_tc_map[TC_BITMASK + 1]; #if IS_ENABLED(CONFIG_FCOE) - /* max exchange id for FCoE LRO by ddp */ unsigned int fcoe_ddp_xid; #endif #if IS_ENABLED(CONFIG_CGROUP_NET_PRIO) struct netprio_map __rcu *priomap; #endif - /* phy device may attach itself for hardware timestamping */ struct phy_device *phydev; - struct lock_class_key *qdisc_tx_busylock; - - /* group the device belongs to */ int group; - struct pm_qos_request pm_qos_req; }; #define to_net_dev(d) container_of(d, struct net_device, dev) -- cgit v1.2.3 From 278571baca2aecf5fb5cb5c8b002dbfa0a6c524c Mon Sep 17 00:00:00 2001 From: Alexei Starovoitov Date: Wed, 30 Jul 2014 20:34:12 -0700 Subject: net: filter: simplify socket charging attaching bpf program to a socket involves multiple socket memory arithmetic, since size of 'sk_filter' is changing when classic BPF is converted to eBPF. Also common path of program creation has to deal with two ways of freeing the memory. Simplify the code by delaying socket charging until program is ready and its size is known Signed-off-by: Alexei Starovoitov Signed-off-by: David S. Miller --- include/linux/filter.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/filter.h b/include/linux/filter.h index 20dd50ef7271..00640edc166f 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -366,7 +366,7 @@ int sk_chk_filter(const struct sock_filter *filter, unsigned int flen); int sk_get_filter(struct sock *sk, struct sock_filter __user *filter, unsigned int len); -void sk_filter_charge(struct sock *sk, struct sk_filter *fp); +bool sk_filter_charge(struct sock *sk, struct sk_filter *fp); void sk_filter_uncharge(struct sock *sk, struct sk_filter *fp); u64 __bpf_call_base(u64 r1, u64 r2, u64 r3, u64 r4, u64 r5); -- cgit v1.2.3 From 009937e78a45553a86d26654f192b2fd9ebe289d Mon Sep 17 00:00:00 2001 From: Alexei Starovoitov Date: Wed, 30 Jul 2014 20:34:13 -0700 Subject: net: filter: rename sk_filter_proglen -> bpf_classic_proglen trivial rename to better match semantics of macro Signed-off-by: Alexei Starovoitov Signed-off-by: David S. Miller --- include/linux/filter.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/filter.h b/include/linux/filter.h index 00640edc166f..3769341a745d 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -344,8 +344,7 @@ static inline unsigned int sk_filter_size(unsigned int proglen) offsetof(struct sk_filter, insns[proglen])); } -#define sk_filter_proglen(fprog) \ - (fprog->len * sizeof(fprog->filter[0])) +#define bpf_classic_proglen(fprog) (fprog->len * sizeof(fprog->filter[0])) int sk_filter(struct sock *sk, struct sk_buff *skb); -- cgit v1.2.3 From 4df95ff488eb796aab9566652c250330179def17 Mon Sep 17 00:00:00 2001 From: Alexei Starovoitov Date: Wed, 30 Jul 2014 20:34:14 -0700 Subject: net: filter: rename sk_chk_filter() -> bpf_check_classic() trivial rename to indicate that this functions performs classic BPF checking Signed-off-by: Alexei Starovoitov Signed-off-by: David S. Miller --- include/linux/filter.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/filter.h b/include/linux/filter.h index 3769341a745d..c4d0be4c5e75 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -361,7 +361,7 @@ void sk_unattached_filter_destroy(struct sk_filter *fp); int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk); int sk_detach_filter(struct sock *sk); -int sk_chk_filter(const struct sock_filter *filter, unsigned int flen); +int bpf_check_classic(const struct sock_filter *filter, unsigned int flen); int sk_get_filter(struct sock *sk, struct sock_filter __user *filter, unsigned int len); -- cgit v1.2.3 From 8fb575ca396bc31d9fa99c26336e2432b41d1bfc Mon Sep 17 00:00:00 2001 From: Alexei Starovoitov Date: Wed, 30 Jul 2014 20:34:15 -0700 Subject: net: filter: rename sk_convert_filter() -> bpf_convert_filter() to indicate that this function is converting classic BPF into eBPF and not related to sockets Signed-off-by: Alexei Starovoitov Signed-off-by: David S. Miller --- include/linux/filter.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/filter.h b/include/linux/filter.h index c4d0be4c5e75..7cb9b40e9a2f 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -351,8 +351,8 @@ int sk_filter(struct sock *sk, struct sk_buff *skb); void sk_filter_select_runtime(struct sk_filter *fp); void sk_filter_free(struct sk_filter *fp); -int sk_convert_filter(struct sock_filter *prog, int len, - struct bpf_insn *new_prog, int *new_len); +int bpf_convert_filter(struct sock_filter *prog, int len, + struct bpf_insn *new_prog, int *new_len); int sk_unattached_filter_create(struct sk_filter **pfp, struct sock_fprog_kern *fprog); -- cgit v1.2.3 From 7ae457c1e5b45a1b826fad9d62b32191d2bdcfdb Mon Sep 17 00:00:00 2001 From: Alexei Starovoitov Date: Wed, 30 Jul 2014 20:34:16 -0700 Subject: net: filter: split 'struct sk_filter' into socket and bpf parts clean up names related to socket filtering and bpf in the following way: - everything that deals with sockets keeps 'sk_*' prefix - everything that is pure BPF is changed to 'bpf_*' prefix split 'struct sk_filter' into struct sk_filter { atomic_t refcnt; struct rcu_head rcu; struct bpf_prog *prog; }; and struct bpf_prog { u32 jited:1, len:31; struct sock_fprog_kern *orig_prog; unsigned int (*bpf_func)(const struct sk_buff *skb, const struct bpf_insn *filter); union { struct sock_filter insns[0]; struct bpf_insn insnsi[0]; struct work_struct work; }; }; so that 'struct bpf_prog' can be used independent of sockets and cleans up 'unattached' bpf use cases split SK_RUN_FILTER macro into: SK_RUN_FILTER to be used with 'struct sk_filter *' and BPF_PROG_RUN to be used with 'struct bpf_prog *' __sk_filter_release(struct sk_filter *) gains __bpf_prog_release(struct bpf_prog *) helper function also perform related renames for the functions that work with 'struct bpf_prog *', since they're on the same lines: sk_filter_size -> bpf_prog_size sk_filter_select_runtime -> bpf_prog_select_runtime sk_filter_free -> bpf_prog_free sk_unattached_filter_create -> bpf_prog_create sk_unattached_filter_destroy -> bpf_prog_destroy sk_store_orig_filter -> bpf_prog_store_orig_filter sk_release_orig_filter -> bpf_release_orig_filter __sk_migrate_filter -> bpf_migrate_filter __sk_prepare_filter -> bpf_prepare_filter API for attaching classic BPF to a socket stays the same: sk_attach_filter(prog, struct sock *)/sk_detach_filter(struct sock *) and SK_RUN_FILTER(struct sk_filter *, ctx) to execute a program which is used by sockets, tun, af_packet API for 'unattached' BPF programs becomes: bpf_prog_create(struct bpf_prog **)/bpf_prog_destroy(struct bpf_prog *) and BPF_PROG_RUN(struct bpf_prog *, ctx) to execute a program which is used by isdn, ppp, team, seccomp, ptp, xt_bpf, cls_bpf, test_bpf Signed-off-by: Alexei Starovoitov Signed-off-by: David S. Miller --- include/linux/filter.h | 40 +++++++++++++++++++++++----------------- include/linux/isdn_ppp.h | 4 ++-- 2 files changed, 25 insertions(+), 19 deletions(-) (limited to 'include/linux') diff --git a/include/linux/filter.h b/include/linux/filter.h index 7cb9b40e9a2f..a5227ab8ccb1 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -296,7 +296,8 @@ enum { }) /* Macro to invoke filter function. */ -#define SK_RUN_FILTER(filter, ctx) (*filter->bpf_func)(ctx, filter->insnsi) +#define SK_RUN_FILTER(filter, ctx) \ + (*filter->prog->bpf_func)(ctx, filter->prog->insnsi) struct bpf_insn { __u8 code; /* opcode */ @@ -323,12 +324,10 @@ struct sk_buff; struct sock; struct seccomp_data; -struct sk_filter { - atomic_t refcnt; +struct bpf_prog { u32 jited:1, /* Is our filter JIT'ed? */ len:31; /* Number of filter blocks */ struct sock_fprog_kern *orig_prog; /* Original BPF program */ - struct rcu_head rcu; unsigned int (*bpf_func)(const struct sk_buff *skb, const struct bpf_insn *filter); union { @@ -338,25 +337,32 @@ struct sk_filter { }; }; -static inline unsigned int sk_filter_size(unsigned int proglen) +struct sk_filter { + atomic_t refcnt; + struct rcu_head rcu; + struct bpf_prog *prog; +}; + +#define BPF_PROG_RUN(filter, ctx) (*filter->bpf_func)(ctx, filter->insnsi) + +static inline unsigned int bpf_prog_size(unsigned int proglen) { - return max(sizeof(struct sk_filter), - offsetof(struct sk_filter, insns[proglen])); + return max(sizeof(struct bpf_prog), + offsetof(struct bpf_prog, insns[proglen])); } #define bpf_classic_proglen(fprog) (fprog->len * sizeof(fprog->filter[0])) int sk_filter(struct sock *sk, struct sk_buff *skb); -void sk_filter_select_runtime(struct sk_filter *fp); -void sk_filter_free(struct sk_filter *fp); +void bpf_prog_select_runtime(struct bpf_prog *fp); +void bpf_prog_free(struct bpf_prog *fp); int bpf_convert_filter(struct sock_filter *prog, int len, struct bpf_insn *new_prog, int *new_len); -int sk_unattached_filter_create(struct sk_filter **pfp, - struct sock_fprog_kern *fprog); -void sk_unattached_filter_destroy(struct sk_filter *fp); +int bpf_prog_create(struct bpf_prog **pfp, struct sock_fprog_kern *fprog); +void bpf_prog_destroy(struct bpf_prog *fp); int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk); int sk_detach_filter(struct sock *sk); @@ -369,7 +375,7 @@ bool sk_filter_charge(struct sock *sk, struct sk_filter *fp); void sk_filter_uncharge(struct sock *sk, struct sk_filter *fp); u64 __bpf_call_base(u64 r1, u64 r2, u64 r3, u64 r4, u64 r5); -void bpf_int_jit_compile(struct sk_filter *fp); +void bpf_int_jit_compile(struct bpf_prog *fp); #define BPF_ANC BIT(15) @@ -423,8 +429,8 @@ static inline void *bpf_load_pointer(const struct sk_buff *skb, int k, #include #include -void bpf_jit_compile(struct sk_filter *fp); -void bpf_jit_free(struct sk_filter *fp); +void bpf_jit_compile(struct bpf_prog *fp); +void bpf_jit_free(struct bpf_prog *fp); static inline void bpf_jit_dump(unsigned int flen, unsigned int proglen, u32 pass, void *image) @@ -438,11 +444,11 @@ static inline void bpf_jit_dump(unsigned int flen, unsigned int proglen, #else #include -static inline void bpf_jit_compile(struct sk_filter *fp) +static inline void bpf_jit_compile(struct bpf_prog *fp) { } -static inline void bpf_jit_free(struct sk_filter *fp) +static inline void bpf_jit_free(struct bpf_prog *fp) { kfree(fp); } diff --git a/include/linux/isdn_ppp.h b/include/linux/isdn_ppp.h index 8e10f57f109f..a0070c6dfaf8 100644 --- a/include/linux/isdn_ppp.h +++ b/include/linux/isdn_ppp.h @@ -180,8 +180,8 @@ struct ippp_struct { struct slcompress *slcomp; #endif #ifdef CONFIG_IPPP_FILTER - struct sk_filter *pass_filter; /* filter for packets to pass */ - struct sk_filter *active_filter; /* filter for pkts to reset idle */ + struct bpf_prog *pass_filter; /* filter for packets to pass */ + struct bpf_prog *active_filter; /* filter for pkts to reset idle */ #endif unsigned long debug; struct isdn_ppp_compressor *compressor,*decompressor; -- cgit v1.2.3 From dbcdd4d58c7230bea3157d56d6ef77c493b3865b Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Fri, 1 Aug 2014 14:01:51 +0200 Subject: cdc_subset: deal with a device that needs reset for timeout This device needs to be reset to recover from a timeout. Unfortunately this can be handled only at the level of the subdrivers. Signed-off-by: Oliver Neukum Signed-off-by: David S. Miller --- include/linux/usb/usbnet.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index 0662e98fef72..26088feb6608 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -148,6 +148,9 @@ struct driver_info { struct sk_buff *(*tx_fixup)(struct usbnet *dev, struct sk_buff *skb, gfp_t flags); + /* recover from timeout */ + void (*recover)(struct usbnet *dev); + /* early initialization code, can sleep. This is for minidrivers * having 'subminidrivers' that need to do extra initialization * right after minidriver have initialized hardware. */ -- cgit v1.2.3 From 7e1e77636e36075ebf118298855268468f1028e8 Mon Sep 17 00:00:00 2001 From: Thomas Graf Date: Sat, 2 Aug 2014 11:47:44 +0200 Subject: lib: Resizable, Scalable, Concurrent Hash Table Generic implementation of a resizable, scalable, concurrent hash table based on [0]. The implementation supports both, fixed size keys specified via an offset and length, or arbitrary keys via own hash and compare functions. Lookups are lockless and protected as RCU read side critical sections. Automatic growing/shrinking based on user configurable watermarks is available while allowing concurrent lookups to take place. Objects to be hashed must include a struct rhash_head. The reason for not using the existing struct hlist_head is that the expansion and shrinking will have two buckets point to a single entry which would lead in obscure reverse chaining behaviour. Code includes a boot selftest if CONFIG_TEST_RHASHTABLE is defined. [0] https://www.usenix.org/legacy/event/atc11/tech/final_files/Triplett.pdf Signed-off-by: Thomas Graf Reviewed-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- include/linux/rhashtable.h | 213 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 213 insertions(+) create mode 100644 include/linux/rhashtable.h (limited to 'include/linux') diff --git a/include/linux/rhashtable.h b/include/linux/rhashtable.h new file mode 100644 index 000000000000..9cda293c867d --- /dev/null +++ b/include/linux/rhashtable.h @@ -0,0 +1,213 @@ +/* + * Resizable, Scalable, Concurrent Hash Table + * + * Copyright (c) 2014 Thomas Graf + * Copyright (c) 2008-2014 Patrick McHardy + * + * Based on the following paper by Josh Triplett, Paul E. McKenney + * and Jonathan Walpole: + * https://www.usenix.org/legacy/event/atc11/tech/final_files/Triplett.pdf + * + * Code partially derived from nft_hash + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _LINUX_RHASHTABLE_H +#define _LINUX_RHASHTABLE_H + +#include + +struct rhash_head { + struct rhash_head *next; +}; + +#define INIT_HASH_HEAD(ptr) ((ptr)->next = NULL) + +struct bucket_table { + size_t size; + struct rhash_head __rcu *buckets[]; +}; + +typedef u32 (*rht_hashfn_t)(const void *data, u32 len, u32 seed); +typedef u32 (*rht_obj_hashfn_t)(const void *data, u32 seed); + +struct rhashtable; + +/** + * struct rhashtable_params - Hash table construction parameters + * @nelem_hint: Hint on number of elements, should be 75% of desired size + * @key_len: Length of key + * @key_offset: Offset of key in struct to be hashed + * @head_offset: Offset of rhash_head in struct to be hashed + * @hash_rnd: Seed to use while hashing + * @max_shift: Maximum number of shifts while expanding + * @hashfn: Function to hash key + * @obj_hashfn: Function to hash object + * @grow_decision: If defined, may return true if table should expand + * @shrink_decision: If defined, may return true if table should shrink + * @mutex_is_held: Must return true if protecting mutex is held + */ +struct rhashtable_params { + size_t nelem_hint; + size_t key_len; + size_t key_offset; + size_t head_offset; + u32 hash_rnd; + size_t max_shift; + rht_hashfn_t hashfn; + rht_obj_hashfn_t obj_hashfn; + bool (*grow_decision)(const struct rhashtable *ht, + size_t new_size); + bool (*shrink_decision)(const struct rhashtable *ht, + size_t new_size); + int (*mutex_is_held)(void); +}; + +/** + * struct rhashtable - Hash table handle + * @tbl: Bucket table + * @nelems: Number of elements in table + * @shift: Current size (1 << shift) + * @p: Configuration parameters + */ +struct rhashtable { + struct bucket_table __rcu *tbl; + size_t nelems; + size_t shift; + struct rhashtable_params p; +}; + +#ifdef CONFIG_PROVE_LOCKING +int lockdep_rht_mutex_is_held(const struct rhashtable *ht); +#else +static inline int lockdep_rht_mutex_is_held(const struct rhashtable *ht) +{ + return 1; +} +#endif /* CONFIG_PROVE_LOCKING */ + +int rhashtable_init(struct rhashtable *ht, struct rhashtable_params *params); + +u32 rhashtable_hashfn(const struct rhashtable *ht, const void *key, u32 len); +u32 rhashtable_obj_hashfn(const struct rhashtable *ht, void *ptr); + +void rhashtable_insert(struct rhashtable *ht, struct rhash_head *node, gfp_t); +bool rhashtable_remove(struct rhashtable *ht, struct rhash_head *node, gfp_t); +void rhashtable_remove_pprev(struct rhashtable *ht, struct rhash_head *obj, + struct rhash_head **pprev, gfp_t flags); + +bool rht_grow_above_75(const struct rhashtable *ht, size_t new_size); +bool rht_shrink_below_30(const struct rhashtable *ht, size_t new_size); + +int rhashtable_expand(struct rhashtable *ht, gfp_t flags); +int rhashtable_shrink(struct rhashtable *ht, gfp_t flags); + +void *rhashtable_lookup(const struct rhashtable *ht, const void *key); +void *rhashtable_lookup_compare(const struct rhashtable *ht, u32 hash, + bool (*compare)(void *, void *), void *arg); + +void rhashtable_destroy(const struct rhashtable *ht); + +#define rht_dereference(p, ht) \ + rcu_dereference_protected(p, lockdep_rht_mutex_is_held(ht)) + +#define rht_dereference_rcu(p, ht) \ + rcu_dereference_check(p, lockdep_rht_mutex_is_held(ht)) + +/* Internal, use rht_obj() instead */ +#define rht_entry(ptr, type, member) container_of(ptr, type, member) +#define rht_entry_safe(ptr, type, member) \ +({ \ + typeof(ptr) __ptr = (ptr); \ + __ptr ? rht_entry(__ptr, type, member) : NULL; \ +}) +#define rht_entry_safe_rcu(ptr, type, member) \ +({ \ + typeof(*ptr) __rcu *__ptr = (typeof(*ptr) __rcu __force *)ptr; \ + __ptr ? container_of((typeof(ptr))rcu_dereference_raw(__ptr), type, member) : NULL; \ +}) + +#define rht_next_entry_safe(pos, ht, member) \ +({ \ + pos ? rht_entry_safe(rht_dereference((pos)->member.next, ht), \ + typeof(*(pos)), member) : NULL; \ +}) + +/** + * rht_for_each - iterate over hash chain + * @pos: &struct rhash_head to use as a loop cursor. + * @head: head of the hash chain (struct rhash_head *) + * @ht: pointer to your struct rhashtable + */ +#define rht_for_each(pos, head, ht) \ + for (pos = rht_dereference(head, ht); \ + pos; \ + pos = rht_dereference((pos)->next, ht)) + +/** + * rht_for_each_entry - iterate over hash chain of given type + * @pos: type * to use as a loop cursor. + * @head: head of the hash chain (struct rhash_head *) + * @ht: pointer to your struct rhashtable + * @member: name of the rhash_head within the hashable struct. + */ +#define rht_for_each_entry(pos, head, ht, member) \ + for (pos = rht_entry_safe(rht_dereference(head, ht), \ + typeof(*(pos)), member); \ + pos; \ + pos = rht_next_entry_safe(pos, ht, member)) + +/** + * rht_for_each_entry_safe - safely iterate over hash chain of given type + * @pos: type * to use as a loop cursor. + * @n: type * to use for temporary next object storage + * @head: head of the hash chain (struct rhash_head *) + * @ht: pointer to your struct rhashtable + * @member: name of the rhash_head within the hashable struct. + * + * This hash chain list-traversal primitive allows for the looped code to + * remove the loop cursor from the list. + */ +#define rht_for_each_entry_safe(pos, n, head, ht, member) \ + for (pos = rht_entry_safe(rht_dereference(head, ht), \ + typeof(*(pos)), member), \ + n = rht_next_entry_safe(pos, ht, member); \ + pos; \ + pos = n, \ + n = rht_next_entry_safe(pos, ht, member)) + +/** + * rht_for_each_rcu - iterate over rcu hash chain + * @pos: &struct rhash_head to use as a loop cursor. + * @head: head of the hash chain (struct rhash_head *) + * @ht: pointer to your struct rhashtable + * + * This hash chain list-traversal primitive may safely run concurrently with + * the _rcu fkht mutation primitives such as rht_insert() as long as the + * traversal is guarded by rcu_read_lock(). + */ +#define rht_for_each_rcu(pos, head, ht) \ + for (pos = rht_dereference_rcu(head, ht); \ + pos; \ + pos = rht_dereference_rcu((pos)->next, ht)) + +/** + * rht_for_each_entry_rcu - iterate over rcu hash chain of given type + * @pos: type * to use as a loop cursor. + * @head: head of the hash chain (struct rhash_head *) + * @member: name of the rhash_head within the hashable struct. + * + * This hash chain list-traversal primitive may safely run concurrently with + * the _rcu fkht mutation primitives such as rht_insert() as long as the + * traversal is guarded by rcu_read_lock(). + */ +#define rht_for_each_entry_rcu(pos, head, member) \ + for (pos = rht_entry_safe_rcu(head, typeof(*(pos)), member); \ + pos; \ + pos = rht_entry_safe_rcu((pos)->member.next, \ + typeof(*(pos)), member)) + +#endif /* _LINUX_RHASHTABLE_H */ -- cgit v1.2.3 From f24b9be5957b38bb420b838115040dc2031b7d0c Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Mon, 4 Aug 2014 22:11:45 -0400 Subject: net-timestamp: extend SCM_TIMESTAMPING ancillary data struct Applications that request kernel tx timestamps with SO_TIMESTAMPING read timestamps as recvmsg() ancillary data. The response is defined implicitly as timespec[3]. 1) define struct scm_timestamping explicitly and 2) add support for new tstamp types. On tx, scm_timestamping always accompanies a sock_extended_err. Define previously unused field ee_info to signal the type of ts[0]. Introduce SCM_TSTAMP_SND to define the existing behavior. The reception path is not modified. On rx, no struct similar to sock_extended_err is passed along with SCM_TIMESTAMPING. Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller --- include/linux/skbuff.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 281deced7469..477f0f60db45 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -249,6 +249,9 @@ enum { SKBTX_SHARED_FRAG = 1 << 5, }; +#define SKBTX_ANY_SW_TSTAMP SKBTX_SW_TSTAMP +#define SKBTX_ANY_TSTAMP (SKBTX_HW_TSTAMP | SKBTX_ANY_SW_TSTAMP) + /* * The callback notifies userspace to release buffers when skb DMA is done in * lower device, the skb last reference should be 0 when calling this. -- cgit v1.2.3 From 09c2d251b70723650ba47e83571ff49281320f7c Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Mon, 4 Aug 2014 22:11:47 -0400 Subject: net-timestamp: add key to disambiguate concurrent datagrams Datagrams timestamped on transmission can coexist in the kernel stack and be reordered in packet scheduling. When reading looped datagrams from the socket error queue it is not always possible to unique correlate looped data with original send() call (for application level retransmits). Even if possible, it may be expensive and complex, requiring packet inspection. Introduce a data-independent ID mechanism to associate timestamps with send calls. Pass an ID alongside the timestamp in field ee_data of sock_extended_err. The ID is a simple 32 bit unsigned int that is associated with the socket and incremented on each send() call for which software tx timestamp generation is enabled. The feature is enabled only if SOF_TIMESTAMPING_OPT_ID is set, to avoid changing ee_data for existing applications that expect it 0. The counter is reset each time the flag is reenabled. Reenabling does not change the ID of already submitted data. It is possible to receive out of order IDs if the timestamp stream is not quiesced first. Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller --- include/linux/skbuff.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 477f0f60db45..0e35b3af7317 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -278,6 +278,7 @@ struct skb_shared_info { unsigned short gso_type; struct sk_buff *frag_list; struct skb_shared_hwtstamps hwtstamps; + u32 tskey; __be32 ip6_frag_id; /* -- cgit v1.2.3 From e7fd2885385157d46c85f282fc6d7d297db43e1f Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Mon, 4 Aug 2014 22:11:48 -0400 Subject: net-timestamp: SCHED timestamp on entering packet scheduler Kernel transmit latency is often incurred in the packet scheduler. Introduce a new timestamp on transmission just before entering the scheduler. When data travels through multiple devices (bonding, tunneling, ...) each device will export an individual timestamp. Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller --- include/linux/skbuff.h | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 0e35b3af7317..50e1e9b3a5a5 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -229,7 +229,7 @@ enum { /* generate hardware time stamp */ SKBTX_HW_TSTAMP = 1 << 0, - /* generate software time stamp */ + /* generate software time stamp when queueing packet to NIC */ SKBTX_SW_TSTAMP = 1 << 1, /* device driver is going to provide hardware time stamp */ @@ -247,9 +247,12 @@ enum { * all frags to avoid possible bad checksum */ SKBTX_SHARED_FRAG = 1 << 5, + + /* generate software time stamp when entering packet scheduling */ + SKBTX_SCHED_TSTAMP = 1 << 6, }; -#define SKBTX_ANY_SW_TSTAMP SKBTX_SW_TSTAMP +#define SKBTX_ANY_SW_TSTAMP (SKBTX_SW_TSTAMP | SKBTX_SCHED_TSTAMP) #define SKBTX_ANY_TSTAMP (SKBTX_HW_TSTAMP | SKBTX_ANY_SW_TSTAMP) /* @@ -2695,6 +2698,10 @@ static inline bool skb_defer_rx_timestamp(struct sk_buff *skb) void skb_complete_tx_timestamp(struct sk_buff *skb, struct skb_shared_hwtstamps *hwtstamps); +void __skb_tstamp_tx(struct sk_buff *orig_skb, + struct skb_shared_hwtstamps *hwtstamps, + struct sock *sk, int tstype); + /** * skb_tstamp_tx - queue clone of skb with send time stamps * @orig_skb: the original outgoing packet -- cgit v1.2.3 From e1c8a607b28190cd09a271508aa3025d3c2f312e Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Mon, 4 Aug 2014 22:11:50 -0400 Subject: net-timestamp: ACK timestamp for bytestreams Add SOF_TIMESTAMPING_TX_ACK, a request for a tstamp when the last byte in the send() call is acknowledged. It implements the feature for TCP. The timestamp is generated when the TCP socket cumulative ACK is moved beyond the tracked seqno for the first time. The feature ignores SACK and FACK, because those acknowledge the specific byte, but not necessarily the entire contents of the buffer up to that byte. Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller --- include/linux/skbuff.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 50e1e9b3a5a5..11c270551d25 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -250,9 +250,14 @@ enum { /* generate software time stamp when entering packet scheduling */ SKBTX_SCHED_TSTAMP = 1 << 6, + + /* generate software timestamp on peer data acknowledgment */ + SKBTX_ACK_TSTAMP = 1 << 7, }; -#define SKBTX_ANY_SW_TSTAMP (SKBTX_SW_TSTAMP | SKBTX_SCHED_TSTAMP) +#define SKBTX_ANY_SW_TSTAMP (SKBTX_SW_TSTAMP | \ + SKBTX_SCHED_TSTAMP | \ + SKBTX_ACK_TSTAMP) #define SKBTX_ANY_TSTAMP (SKBTX_HW_TSTAMP | SKBTX_ANY_SW_TSTAMP) /* -- cgit v1.2.3