From 0f4bd46ec252887f44f1f065b41867cac8f70dfb Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Tue, 22 Dec 2009 03:15:43 +0000 Subject: kmsg_dump: Dump on crash_kexec as well crash_kexec gets called before kmsg_dump(KMSG_DUMP_OOPS) if panic_on_oops is set, so the kernel log buffer is not stored for this case. This patch adds a KMSG_DUMP_KEXEC dump type which gets called when crash_kexec() is invoked. To avoid getting double dumps, the old KMSG_DUMP_PANIC is moved below crash_kexec(). The mtdoops driver is modified to handle KMSG_DUMP_KEXEC in the same way as a panic. Signed-off-by: KOSAKI Motohiro Acked-by: Simon Kagstrom Signed-off-by: David Woodhouse --- include/linux/kmsg_dump.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/kmsg_dump.h b/include/linux/kmsg_dump.h index e32aa268efac..24b44145a886 100644 --- a/include/linux/kmsg_dump.h +++ b/include/linux/kmsg_dump.h @@ -17,6 +17,7 @@ enum kmsg_dump_reason { KMSG_DUMP_OOPS, KMSG_DUMP_PANIC, + KMSG_DUMP_KEXEC, }; /** -- cgit v1.2.3 From 8558e3943df1c51c3377cb4e8a52ea484d6f357d Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 6 Jan 2010 16:11:06 -0500 Subject: x86, ACPI: delete acpi_boot_table_init() return value cleanup only. setup_arch(), doesn't care care if ACPI initialization succeeded or failed, so delete acpi_boot_table_init()'s return value. Signed-off-by: Len Brown --- include/linux/acpi.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 36924255c0d5..b926afe8c03e 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -80,7 +80,7 @@ char * __acpi_map_table (unsigned long phys_addr, unsigned long size); void __acpi_unmap_table(char *map, unsigned long size); int early_acpi_boot_init(void); int acpi_boot_init (void); -int acpi_boot_table_init (void); +void acpi_boot_table_init (void); int acpi_mps_check (void); int acpi_numa_init (void); @@ -321,9 +321,9 @@ static inline int acpi_boot_init(void) return 0; } -static inline int acpi_boot_table_init(void) +static inline void acpi_boot_table_init(void) { - return 0; + return; } static inline int acpi_mps_check(void) -- cgit v1.2.3 From dd3d145d49c5816b79acc6761ebbd842bc50b0ee Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Mon, 11 Jan 2010 03:21:48 -0500 Subject: block: Fix discard alignment calculation and printing Discard alignment reporting for partitions was incorrect. Update to match the algorithm used elsewhere. The alignment can be negative (misaligned). Fix format string accordingly. Signed-off-by: Martin K. Petersen Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 9b98173a8184..a41bcc8e140f 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -1148,8 +1148,11 @@ static inline int queue_discard_alignment(struct request_queue *q) static inline int queue_sector_discard_alignment(struct request_queue *q, sector_t sector) { - return ((sector << 9) - q->limits.discard_alignment) - & (q->limits.discard_granularity - 1); + struct queue_limits *lim = &q->limits; + unsigned int alignment = (sector << 9) & (lim->discard_granularity - 1); + + return (lim->discard_granularity + lim->discard_alignment - alignment) + & (lim->discard_granularity - 1); } static inline unsigned int queue_discard_zeroes_data(struct request_queue *q) -- cgit v1.2.3 From 17be8c245054b9c7786545af3ba3ca4e54cd4ad9 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Mon, 11 Jan 2010 03:21:49 -0500 Subject: block: bdev_stack_limits wrapper DM does not want to know about partition offsets. Add a partition-aware wrapper that DM can use when stacking block devices. Signed-off-by: Martin K. Petersen Acked-by: Mike Snitzer Reviewed-by: Alasdair G Kergon Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index a41bcc8e140f..5c8018977efa 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -938,6 +938,8 @@ extern void blk_queue_io_opt(struct request_queue *q, unsigned int opt); extern void blk_set_default_limits(struct queue_limits *lim); extern int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, sector_t offset); +extern int bdev_stack_limits(struct queue_limits *t, struct block_device *bdev, + sector_t offset); extern void disk_stack_limits(struct gendisk *disk, struct block_device *bdev, sector_t offset); extern void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b); -- cgit v1.2.3 From ce289321b7dc1eb108e3df0dec872b7429ef49f7 Mon Sep 17 00:00:00 2001 From: Kirill Afonshin Date: Fri, 8 Jan 2010 22:09:59 +0300 Subject: block: removed unused as_io_context It isn't used anymore, since AS was deleted. Signed-off-by: Jens Axboe --- include/linux/iocontext.h | 27 --------------------------- 1 file changed, 27 deletions(-) (limited to 'include/linux') diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h index a63235996309..78ef023227d4 100644 --- a/include/linux/iocontext.h +++ b/include/linux/iocontext.h @@ -4,32 +4,6 @@ #include #include -/* - * This is the per-process anticipatory I/O scheduler state. - */ -struct as_io_context { - spinlock_t lock; - - void (*dtor)(struct as_io_context *aic); /* destructor */ - void (*exit)(struct as_io_context *aic); /* called on task exit */ - - unsigned long state; - atomic_t nr_queued; /* queued reads & sync writes */ - atomic_t nr_dispatched; /* number of requests gone to the drivers */ - - /* IO History tracking */ - /* Thinktime */ - unsigned long last_end_request; - unsigned long ttime_total; - unsigned long ttime_samples; - unsigned long ttime_mean; - /* Layout pattern */ - unsigned int seek_samples; - sector_t last_request_pos; - u64 seek_total; - sector_t seek_mean; -}; - struct cfq_queue; struct cfq_io_context { void *key; @@ -78,7 +52,6 @@ struct io_context { unsigned long last_waited; /* Time last woken after wait for request */ int nr_batch_requests; /* Number of requests left in the batch */ - struct as_io_context *aic; struct radix_tree_root radix_root; struct hlist_head cic_list; void *ioc_data; -- cgit v1.2.3 From 7af92f8754b87bc78cbfd447d5f4096b25c46682 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 6 Jan 2010 15:45:55 -0800 Subject: genhd: overlapping variable definition This fixes the sparse warning: fs/ext4/super.c:2390:40: warning: symbol 'i' shadows an earlier one fs/ext4/super.c:2368:22: originally declared here Using 'i' in a macro is dubious practice. Signed-off-by: Stephen Hemminger Signed-off-by: Jens Axboe --- include/linux/genhd.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/genhd.h b/include/linux/genhd.h index c6c0c41af35f..9717081c75ad 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -256,9 +256,9 @@ extern struct hd_struct *disk_map_sector_rcu(struct gendisk *disk, #define part_stat_read(part, field) \ ({ \ typeof((part)->dkstats->field) res = 0; \ - int i; \ - for_each_possible_cpu(i) \ - res += per_cpu_ptr((part)->dkstats, i)->field; \ + unsigned int _cpu; \ + for_each_possible_cpu(_cpu) \ + res += per_cpu_ptr((part)->dkstats, _cpu)->field; \ res; \ }) -- cgit v1.2.3 From a393db6f10ef2d4f28257234cfc730e744dfb6a4 Mon Sep 17 00:00:00 2001 From: Philipp Reisner Date: Tue, 22 Dec 2009 13:35:52 +0100 Subject: drbd: Allow online resizing of DRBD devices while peer not reachable (needs to be explicitly forced) Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg --- include/linux/drbd_nl.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/drbd_nl.h b/include/linux/drbd_nl.h index db5721ad50d1..a4d82f895994 100644 --- a/include/linux/drbd_nl.h +++ b/include/linux/drbd_nl.h @@ -69,6 +69,7 @@ NL_PACKET(disconnect, 6, ) NL_PACKET(resize, 7, NL_INT64( 29, T_MAY_IGNORE, resize_size) + NL_BIT( 68, T_MAY_IGNORE, resize_force) ) NL_PACKET(syncer_conf, 8, -- cgit v1.2.3 From 2ebccd71a71e6078920bc65b40f120e72b71c2b6 Mon Sep 17 00:00:00 2001 From: Philipp Reisner Date: Tue, 12 Jan 2010 10:09:07 +0100 Subject: drbd: The kernel code is now equivalent to out of tree release 8.3.7 Signed-off-by: Philipp Reisner Signed-off-by: Lars Ellenberg --- include/linux/drbd.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/drbd.h b/include/linux/drbd.h index e84f4733cb55..78962272338a 100644 --- a/include/linux/drbd.h +++ b/include/linux/drbd.h @@ -53,7 +53,7 @@ extern const char *drbd_buildtag(void); -#define REL_VERSION "8.3.6" +#define REL_VERSION "8.3.7" #define API_VERSION 88 #define PRO_VERSION_MIN 86 #define PRO_VERSION_MAX 91 -- cgit v1.2.3 From f6a8c60960bbea378142d1fa1b3d111555ee41c7 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Sun, 29 Nov 2009 15:23:51 +0000 Subject: mtd: Really add ARM pismo support (Commit 7cb777a3d71f9d1f7eb149c7a504d21f24219ae8 (mtd: add ARM pismo support) intended to add this, but seems only to have patched the Makefile without touching Kconfig or providing any code...) The following patch adds support for PISMO modules found on ARM Ltd development platforms. These are MTD modules, and can have a selection of SRAM, flash or DOC devices as described by an on-board I2C EEPROM. We support SRAM and NOR flash devices only by registering appropriate conventional MTD platform devices as children of the 'pismo' device. Signed-off-by: Russell King Signed-off-by: David Woodhouse --- include/linux/mtd/pismo.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 include/linux/mtd/pismo.h (limited to 'include/linux') diff --git a/include/linux/mtd/pismo.h b/include/linux/mtd/pismo.h new file mode 100644 index 000000000000..8dfb7e1421c5 --- /dev/null +++ b/include/linux/mtd/pismo.h @@ -0,0 +1,17 @@ +/* + * PISMO memory driver - http://www.pismoworld.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + */ +#ifndef __LINUX_MTD_PISMO_H +#define __LINUX_MTD_PISMO_H + +struct pismo_pdata { + void (*set_vpp)(void *, int); + void *vpp_data; + phys_addr_t cs_addrs[5]; +}; + +#endif -- cgit v1.2.3 From 9dffe2a32b0deef52605d50527c0d240b15cabf7 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 4 Jan 2010 18:05:00 +0000 Subject: mfd: Correct WM835x ISINK ramp time defines The constants used to specify ISINK ramp times for WM835x had the wrong shifts so that the on times applied to the off ramp and vice versa. The masks for the bitfields are correct. Signed-off-by: Mark Brown Cc: stable@kernel.org Signed-off-by: Samuel Ortiz --- include/linux/mfd/wm8350/pmic.h | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/wm8350/pmic.h b/include/linux/mfd/wm8350/pmic.h index be3264e286e0..e786fe9841ef 100644 --- a/include/linux/mfd/wm8350/pmic.h +++ b/include/linux/mfd/wm8350/pmic.h @@ -666,20 +666,20 @@ #define WM8350_ISINK_FLASH_DUR_64MS (1 << 8) #define WM8350_ISINK_FLASH_DUR_96MS (2 << 8) #define WM8350_ISINK_FLASH_DUR_1024MS (3 << 8) -#define WM8350_ISINK_FLASH_ON_INSTANT (0 << 4) -#define WM8350_ISINK_FLASH_ON_0_25S (1 << 4) -#define WM8350_ISINK_FLASH_ON_0_50S (2 << 4) -#define WM8350_ISINK_FLASH_ON_1_00S (3 << 4) -#define WM8350_ISINK_FLASH_ON_1_95S (1 << 4) -#define WM8350_ISINK_FLASH_ON_3_91S (2 << 4) -#define WM8350_ISINK_FLASH_ON_7_80S (3 << 4) -#define WM8350_ISINK_FLASH_OFF_INSTANT (0 << 0) -#define WM8350_ISINK_FLASH_OFF_0_25S (1 << 0) -#define WM8350_ISINK_FLASH_OFF_0_50S (2 << 0) -#define WM8350_ISINK_FLASH_OFF_1_00S (3 << 0) -#define WM8350_ISINK_FLASH_OFF_1_95S (1 << 0) -#define WM8350_ISINK_FLASH_OFF_3_91S (2 << 0) -#define WM8350_ISINK_FLASH_OFF_7_80S (3 << 0) +#define WM8350_ISINK_FLASH_ON_INSTANT (0 << 0) +#define WM8350_ISINK_FLASH_ON_0_25S (1 << 0) +#define WM8350_ISINK_FLASH_ON_0_50S (2 << 0) +#define WM8350_ISINK_FLASH_ON_1_00S (3 << 0) +#define WM8350_ISINK_FLASH_ON_1_95S (1 << 0) +#define WM8350_ISINK_FLASH_ON_3_91S (2 << 0) +#define WM8350_ISINK_FLASH_ON_7_80S (3 << 0) +#define WM8350_ISINK_FLASH_OFF_INSTANT (0 << 4) +#define WM8350_ISINK_FLASH_OFF_0_25S (1 << 4) +#define WM8350_ISINK_FLASH_OFF_0_50S (2 << 4) +#define WM8350_ISINK_FLASH_OFF_1_00S (3 << 4) +#define WM8350_ISINK_FLASH_OFF_1_95S (1 << 4) +#define WM8350_ISINK_FLASH_OFF_3_91S (2 << 4) +#define WM8350_ISINK_FLASH_OFF_7_80S (3 << 4) /* * Regulator Interrupts. -- cgit v1.2.3 From 64e8867ba8098b69889c1af94997a5ba2348fb26 Mon Sep 17 00:00:00 2001 From: Ian Molton Date: Wed, 6 Jan 2010 13:51:48 +0100 Subject: mfd: tmio_mmc hardware abstraction for CNF area This patch abstracts out the CNF area code from tmio_mmc which is not present in all hardware that can use this driver. This is required so that we can support non-toshiba based hardware. ASIC3 support by Philipp Zabel Signed-off-by: Ian Molton Signed-off-by: Magnus Damm Signed-off-by: Samuel Ortiz --- include/linux/mfd/tmio.h | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index 6b9c5d06690c..9cb1834deffa 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -2,6 +2,8 @@ #define MFD_TMIO_H #include +#include +#include #define tmio_ioread8(addr) readb(addr) #define tmio_ioread16(addr) readw(addr) @@ -18,11 +20,48 @@ writew((val) >> 16, (addr) + 2); \ } while (0) +#define CNF_CMD 0x04 +#define CNF_CTL_BASE 0x10 +#define CNF_INT_PIN 0x3d +#define CNF_STOP_CLK_CTL 0x40 +#define CNF_GCLK_CTL 0x41 +#define CNF_SD_CLK_MODE 0x42 +#define CNF_PIN_STATUS 0x44 +#define CNF_PWR_CTL_1 0x48 +#define CNF_PWR_CTL_2 0x49 +#define CNF_PWR_CTL_3 0x4a +#define CNF_CARD_DETECT_MODE 0x4c +#define CNF_SD_SLOT 0x50 +#define CNF_EXT_GCLK_CTL_1 0xf0 +#define CNF_EXT_GCLK_CTL_2 0xf1 +#define CNF_EXT_GCLK_CTL_3 0xf9 +#define CNF_SD_LED_EN_1 0xfa +#define CNF_SD_LED_EN_2 0xfe + +#define SDCREN 0x2 /* Enable access to MMC CTL regs. (flag in COMMAND_REG)*/ + +#define sd_config_write8(base, shift, reg, val) \ + tmio_iowrite8((val), (base) + ((reg) << (shift))) +#define sd_config_write16(base, shift, reg, val) \ + tmio_iowrite16((val), (base) + ((reg) << (shift))) +#define sd_config_write32(base, shift, reg, val) \ + do { \ + tmio_iowrite16((val), (base) + ((reg) << (shift))); \ + tmio_iowrite16((val) >> 16, (base) + ((reg + 2) << (shift))); \ + } while (0) + +int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base); +int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base); +void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state); +void tmio_core_mmc_clk_div(void __iomem *cnf, int shift, int state); + /* * data for the MMC controller */ struct tmio_mmc_data { const unsigned int hclk; + void (*set_pwr)(struct platform_device *host, int state); + void (*set_clk_div)(struct platform_device *host, int state); }; /* -- cgit v1.2.3 From ec51b7f538c440bfa5a4d538133c659071c02155 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 19 Jan 2010 00:27:58 -0800 Subject: Input: ad7879 - support auxiliary GPIOs via gpiolib Drop the simple fancy sysfs hooks for the aux GPIOs and expose these via the gpiolib interface so that other drivers can use them. Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger Signed-off-by: Dmitry Torokhov --- include/linux/spi/ad7879.h | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/spi/ad7879.h b/include/linux/spi/ad7879.h index 4231104c9afa..6334cee1a3be 100644 --- a/include/linux/spi/ad7879.h +++ b/include/linux/spi/ad7879.h @@ -28,8 +28,12 @@ struct ad7879_platform_data { * 1 = 4, 2 = 8, 3 = 16 (median > averaging) */ u8 median; - /* 1 = AUX/VBAT/GPIO set to GPIO Output */ - u8 gpio_output; - /* Initial GPIO pin state (valid if gpio_output = 1) */ - u8 gpio_default; + /* 1 = AUX/VBAT/GPIO export GPIO to gpiolib + * requires CONFIG_GPIOLIB + */ + bool gpio_export; + /* identifies the first GPIO number handled by this chip; + * or, if negative, requests dynamic ID allocation. + */ + s32 gpio_base; }; -- cgit v1.2.3 From 4f9c85a1b03bfa5c0a0d8488a3a7766f3c9fb756 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Mon, 18 Jan 2010 05:37:16 +0000 Subject: phylib: Move workqueue initialization to a proper place commit 541cd3ee00a4fe975b22fac6a3bc846bacef37f7 ("phylib: Fix deadlock on resume") caused TI DaVinci EMAC ethernet driver to oops upon resume: PM: resume of devices complete after 237.098 msecs Restarting tasks ... done. kernel BUG at kernel/workqueue.c:354! Unable to handle kernel NULL pointer dereference at virtual address 00000000 [...] Backtrace: [] (__bug+0x0/0x2c) from [] (queue_delayed_work_on+0x74/0xf8) [] (queue_delayed_work_on+0x0/0xf8) from [] (queue_delayed_work+0x2c/0x30) The oops pops up because TI DaVinci EMAC driver detaches PHY on suspend and attaches it back on resume. Attaching makes phylib call phy_start_machine() that initializes a workqueue. On the other hand, PHY's resume routine will call phy_start_machine() again, and that will cause the oops since we just destroyed the already scheduled workqueue. This patch fixes the issue by moving workqueue initialization to phy_device_create(). p.s. We don't see this oops with ucc_geth and gianfar drivers because they perform a fine-grained suspend, i.e. they just stop the PHYs without detaching. Reported-by: Sekhar Nori Signed-off-by: Anton Vorontsov Tested-by: Sekhar Nori Signed-off-by: David S. Miller --- include/linux/phy.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/phy.h b/include/linux/phy.h index 7968defd2fa7..6a7eb402165d 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -485,6 +485,7 @@ void phy_driver_unregister(struct phy_driver *drv); int phy_driver_register(struct phy_driver *new_driver); void phy_prepare_link(struct phy_device *phydev, void (*adjust_link)(struct net_device *)); +void phy_state_machine(struct work_struct *work); void phy_start_machine(struct phy_device *phydev, void (*handler)(struct net_device *)); void phy_stop_machine(struct phy_device *phydev); -- cgit v1.2.3 From 04a723ea9c53ba608b0411aa36948bb57c51a08e Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Wed, 6 Jan 2010 10:16:51 -0800 Subject: USB: Fix duplicate sysfs problem after device reset. Borislav Petkov reports issues with duplicate sysfs endpoint files after a resume from a hibernate. It turns out that the code to support alternate settings under xHCI has issues when a device with a non-default alternate setting is reset during the hibernate: [ 427.681810] Restarting tasks ... [ 427.681995] hub 1-0:1.0: state 7 ports 6 chg 0004 evt 0000 [ 427.682019] usb usb3: usb resume [ 427.682030] ohci_hcd 0000:00:12.0: wakeup root hub [ 427.682191] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 427.682205] usb 1-2: usb wakeup-resume [ 427.682226] usb 1-2: finish reset-resume [ 427.682886] done. [ 427.734658] ehci_hcd 0000:00:12.2: port 2 high speed [ 427.734663] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 427.746682] hub 3-0:1.0: hub_reset_resume [ 427.746693] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 427.786715] usb 1-2: reset high speed USB device using ehci_hcd and address 2 [ 427.839653] ehci_hcd 0000:00:12.2: port 2 high speed [ 427.839666] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 427.847717] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [1] = 0x00010100 CSC PPS [ 427.915497] hub 1-2:1.0: remove_intf_ep_devs: if: ffff88022f9e8800 ->ep_devs_created: 1 [ 427.915774] hub 1-2:1.0: remove_intf_ep_devs: bNumEndpoints: 1 [ 427.915934] hub 1-2:1.0: if: ffff88022f9e8800: endpoint devs removed. [ 427.916158] hub 1-2:1.0: create_intf_ep_devs: if: ffff88022f9e8800 ->ep_devs_created: 0, ->unregistering: 0 [ 427.916434] hub 1-2:1.0: create_intf_ep_devs: bNumEndpoints: 1 [ 427.916609] ep_81: create, parent hub [ 427.916632] ------------[ cut here ]------------ [ 427.916644] WARNING: at fs/sysfs/dir.c:477 sysfs_add_one+0x82/0x96() [ 427.916649] Hardware name: System Product Name [ 427.916653] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.0/ep_81' [ 427.916658] Modules linked in: binfmt_misc kvm_amd kvm powernow_k8 cpufreq_ondemand cpufreq_powersave cpufreq_userspace freq_table cpufreq_conservative ipv6 vfat fat +8250_pnp 8250 pcspkr ohci_hcd serial_core k10temp edac_core [ 427.916694] Pid: 278, comm: khubd Not tainted 2.6.33-rc2-00187-g08d869a-dirty #13 [ 427.916699] Call Trace: The problem is caused by a mismatch between the USB core's view of the device state and the USB device and xHCI host's view of the device state. After the device reset and re-configuration, the device and the xHCI host think they are using alternate setting 0 of all interfaces. However, the USB core keeps track of the old state, which may include non-zero alternate settings. It uses intf->cur_altsetting to keep the endpoint sysfs files for the old state across the reset. The bandwidth allocation functions need to know what the xHCI host thinks the current alternate settings are, so original patch set intf->cur_altsetting to the alternate setting 0. This caused duplicate endpoint files to be created. The solution is to not set intf->cur_altsetting before calling usb_set_interface() in usb_reset_and_verify_device(). Instead, we add a new flag to struct usb_interface to tell usb_hcd_alloc_bandwidth() to use alternate setting 0 as the currently installed alternate setting. Signed-off-by: Sarah Sharp Tested-by: Borislav Petkov Cc: Alan Stern Signed-off-by: Greg Kroah-Hartman --- include/linux/usb.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/usb.h b/include/linux/usb.h index e101a2d04d75..d7ace1b80f09 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -192,6 +192,7 @@ struct usb_interface { unsigned needs_altsetting0:1; /* switch to altsetting 0 is pending */ unsigned needs_binding:1; /* needs delayed unbind/rebind */ unsigned reset_running:1; + unsigned resetting_device:1; /* true: bandwidth alloc after reset */ struct device dev; /* interface specific device info */ struct device *usb_dev; -- cgit v1.2.3 From 50b926e439620c469565e8be0f28be78f5fca1ce Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Mon, 4 Jan 2010 14:44:56 +0100 Subject: sched: Fix vmark regression on big machines SD_PREFER_SIBLING is set at the CPU domain level if power saving isn't enabled, leading to many cache misses on large machines as we traverse looking for an idle shared cache to wake to. Change the enabler of select_idle_sibling() to SD_SHARE_PKG_RESOURCES, and enable same at the sibling domain level. Reported-by: Lin Ming Signed-off-by: Mike Galbraith Signed-off-by: Peter Zijlstra LKML-Reference: <1262612696.15495.15.camel@marge.simson.net> Signed-off-by: Ingo Molnar --- include/linux/topology.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/topology.h b/include/linux/topology.h index 57e63579bfdd..5b81156780b1 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -99,7 +99,7 @@ int arch_update_cpu_topology(void); | 1*SD_WAKE_AFFINE \ | 1*SD_SHARE_CPUPOWER \ | 0*SD_POWERSAVINGS_BALANCE \ - | 0*SD_SHARE_PKG_RESOURCES \ + | 1*SD_SHARE_PKG_RESOURCES \ | 0*SD_SERIALIZE \ | 0*SD_PREFER_SIBLING \ , \ -- cgit v1.2.3 From 92b6759857ea3ad19bc6871044e373f6251841d3 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 18 Jan 2010 14:02:16 +0100 Subject: perf: Change the is_software_event() definition The is_software_event() definition always confuses me because its an exclusive expression, make it an inclusive one. Signed-off-by: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- include/linux/perf_event.h | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index c66b34f75eea..8fa71874113f 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -814,9 +814,14 @@ extern int perf_event_overflow(struct perf_event *event, int nmi, */ static inline int is_software_event(struct perf_event *event) { - return (event->attr.type != PERF_TYPE_RAW) && - (event->attr.type != PERF_TYPE_HARDWARE) && - (event->attr.type != PERF_TYPE_HW_CACHE); + switch (event->attr.type) { + case PERF_TYPE_SOFTWARE: + case PERF_TYPE_TRACEPOINT: + /* for now the breakpoint stuff also works as software event */ + case PERF_TYPE_BREAKPOINT: + return 1; + } + return 0; } extern atomic_t perf_swevent_enabled[PERF_COUNT_SW_MAX]; -- cgit v1.2.3 From cb289d6244a37cf932c571d6deb0daa8030f931b Mon Sep 17 00:00:00 2001 From: Davide Libenzi Date: Wed, 13 Jan 2010 09:34:36 -0800 Subject: eventfd - allow atomic read and waitqueue remove KVM needs a wait to atomically remove themselves from the eventfd ->poll() wait queue head, in order to handle correctly their IRQfd deassign operation. This patch introduces such API, plus a way to read an eventfd from its context. Signed-off-by: Davide Libenzi Signed-off-by: Avi Kivity --- include/linux/eventfd.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'include/linux') diff --git a/include/linux/eventfd.h b/include/linux/eventfd.h index 94dd10366a78..91bb4f27238c 100644 --- a/include/linux/eventfd.h +++ b/include/linux/eventfd.h @@ -10,6 +10,7 @@ #include #include +#include /* * CAREFUL: Check include/asm-generic/fcntl.h when defining @@ -34,6 +35,9 @@ struct file *eventfd_fget(int fd); struct eventfd_ctx *eventfd_ctx_fdget(int fd); struct eventfd_ctx *eventfd_ctx_fileget(struct file *file); int eventfd_signal(struct eventfd_ctx *ctx, int n); +ssize_t eventfd_ctx_read(struct eventfd_ctx *ctx, int no_wait, __u64 *cnt); +int eventfd_ctx_remove_wait_queue(struct eventfd_ctx *ctx, wait_queue_t *wait, + __u64 *cnt); #else /* CONFIG_EVENTFD */ @@ -61,6 +65,18 @@ static inline void eventfd_ctx_put(struct eventfd_ctx *ctx) } +static inline ssize_t eventfd_ctx_read(struct eventfd_ctx *ctx, int no_wait, + __u64 *cnt) +{ + return -ENOSYS; +} + +static inline int eventfd_ctx_remove_wait_queue(struct eventfd_ctx *ctx, + wait_queue_t *wait, __u64 *cnt) +{ + return -ENOSYS; +} + #endif #endif /* _LINUX_EVENTFD_H */ -- cgit v1.2.3 From 6d3faf6f431bafb25f4b9926c50a7e5c267738c6 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sun, 24 Jan 2010 14:48:00 +0100 Subject: firewire: cdev: add_descriptor documentation fix struct fw_cdev_add_descriptor.length is in quadlets, not in bytes. Also remove any doubts about the endianess of descriptor data. Signed-off-by: Stefan Richter --- include/linux/firewire-cdev.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/firewire-cdev.h b/include/linux/firewire-cdev.h index 1f716d9f714b..520ecf86cbb3 100644 --- a/include/linux/firewire-cdev.h +++ b/include/linux/firewire-cdev.h @@ -380,7 +380,7 @@ struct fw_cdev_initiate_bus_reset { * @immediate: If non-zero, immediate key to insert before pointer * @key: Upper 8 bits of root directory pointer * @data: Userspace pointer to contents of descriptor block - * @length: Length of descriptor block data, in bytes + * @length: Length of descriptor block data, in quadlets * @handle: Handle to the descriptor, written by the kernel * * Add a descriptor block and optionally a preceding immediate key to the local @@ -394,6 +394,8 @@ struct fw_cdev_initiate_bus_reset { * If not 0, the @immediate field specifies an immediate key which will be * inserted before the root directory pointer. * + * @immediate, @key, and @data array elements are CPU-endian quadlets. + * * If successful, the kernel adds the descriptor and writes back a handle to the * kernel-side object to be used for later removal of the descriptor block and * immediate key. -- cgit v1.2.3 From 0531b2aac59c2296570ac52bfc032ef2ace7d5e1 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 27 Jan 2010 09:20:03 -0800 Subject: mm: add new 'read_cache_page_gfp()' helper function It's a simplified 'read_cache_page()' which takes a page allocation flag, so that different paths can control how aggressive the memory allocations are that populate a address space. In particular, the intel GPU object mapping code wants to be able to do a certain amount of own internal memory management by automatically shrinking the address space when memory starts getting tight. This allows it to dynamically use different memory allocation policies on a per-allocation basis, rather than depend on the (static) address space gfp policy. The actual new function is a one-liner, but re-organizing the helper functions to the point where you can do this with a single line of code is what most of the patch is all about. Tested-by: Chris Wilson Signed-off-by: Linus Torvalds --- include/linux/pagemap.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h index ed5d7501e181..3c62ed408492 100644 --- a/include/linux/pagemap.h +++ b/include/linux/pagemap.h @@ -253,6 +253,8 @@ extern struct page * read_cache_page_async(struct address_space *mapping, extern struct page * read_cache_page(struct address_space *mapping, pgoff_t index, filler_t *filler, void *data); +extern struct page * read_cache_page_gfp(struct address_space *mapping, + pgoff_t index, gfp_t gfp_mask); extern int read_cache_pages(struct address_space *mapping, struct list_head *pages, filler_t *filler, void *data); -- cgit v1.2.3 From bb209c8287d2d55ec4a67e3933346e0a3ee0da76 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 26 Jan 2010 17:10:03 +0000 Subject: powerpc/pci: Add calls to set_pcie_port_type() and set_pcie_hotplug_bridge() We are missing these when building the pci_dev from scratch off the Open Firmware device-tree Signed-off-by: Benjamin Herrenschmidt Acked-by: Jesse Barnes --- include/linux/pci.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index 174e5392e51e..c1968f464c38 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -756,6 +756,10 @@ pci_power_t pci_target_state(struct pci_dev *dev); int pci_prepare_to_sleep(struct pci_dev *dev); int pci_back_from_sleep(struct pci_dev *dev); +/* For use by arch with custom probe code */ +void set_pcie_port_type(struct pci_dev *pdev); +void set_pcie_hotplug_bridge(struct pci_dev *pdev); + /* Functions for PCI Hotplug drivers to use */ int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap); #ifdef CONFIG_HOTPLUG -- cgit v1.2.3 From cb6ecf6f7afece066265e243657b0ac28150a7b2 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Thu, 28 Jan 2010 22:28:27 -0800 Subject: Input: add the ABS_MT_PRESSURE event For pressure-based multi-touch devices, a direct way to send sensor intensity data per finger is needed. This patch adds the ABS_MT_PRESSURE event to the MT protocol. Requested-by: Yoonyoung Shim Requested-by: Mika Kuoppala Requested-by: Peter Hutterer Signed-off-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov --- include/linux/input.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/input.h b/include/linux/input.h index 7be8a6537b57..735ceaf1bc2d 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -660,6 +660,7 @@ struct input_absinfo { #define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */ #define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */ #define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */ +#define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */ #define ABS_MAX 0x3f #define ABS_CNT (ABS_MAX+1) -- cgit v1.2.3 From 221af7f87b97431e3ee21ce4b0e77d5411cf1549 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 28 Jan 2010 22:14:42 -0800 Subject: Split 'flush_old_exec' into two functions 'flush_old_exec()' is the point of no return when doing an execve(), and it is pretty badly misnamed. It doesn't just flush the old executable environment, it also starts up the new one. Which is very inconvenient for things like setting up the new personality, because we want the new personality to affect the starting of the new environment, but at the same time we do _not_ want the new personality to take effect if flushing the old one fails. As a result, the x86-64 '32-bit' personality is actually done using this insane "I'm going to change the ABI, but I haven't done it yet" bit (TIF_ABI_PENDING), with SET_PERSONALITY() not actually setting the personality, but just the "pending" bit, so that "flush_thread()" can do the actual personality magic. This patch in no way changes any of that insanity, but it does split the 'flush_old_exec()' function up into a preparatory part that can fail (still called flush_old_exec()), and a new part that will actually set up the new exec environment (setup_new_exec()). All callers are changed to trivially comply with the new world order. Signed-off-by: H. Peter Anvin Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- include/linux/binfmts.h | 1 + include/linux/sched.h | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h index cd4349bdc34e..89c6249fc561 100644 --- a/include/linux/binfmts.h +++ b/include/linux/binfmts.h @@ -109,6 +109,7 @@ extern int prepare_binprm(struct linux_binprm *); extern int __must_check remove_arg_zero(struct linux_binprm *); extern int search_binary_handler(struct linux_binprm *,struct pt_regs *); extern int flush_old_exec(struct linux_binprm * bprm); +extern void setup_new_exec(struct linux_binprm * bprm); extern int suid_dumpable; #define SUID_DUMP_DISABLE 0 /* No setuid dumping */ diff --git a/include/linux/sched.h b/include/linux/sched.h index 6f7bba93929b..abdfacc58653 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1369,7 +1369,7 @@ struct task_struct { char comm[TASK_COMM_LEN]; /* executable name excluding path - access with [gs]et_task_comm (which lock it with task_lock()) - - initialized normally by flush_old_exec */ + - initialized normally by setup_new_exec */ /* file system info */ int link_count, total_link_count; #ifdef CONFIG_SYSVIPC -- cgit v1.2.3 From 5352ae638e2d7d5c9b2e4d528676bbf2af6fd6f3 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Thu, 28 Jan 2010 17:04:43 -0600 Subject: perf, hw_breakpoint, kgdb: Do not take mutex for kernel debugger This patch fixes the regression in functionality where the kernel debugger and the perf API do not nicely share hw breakpoint reservations. The kernel debugger cannot use any mutex_lock() calls because it can start the kernel running from an invalid context. A mutex free version of the reservation API needed to get created for the kernel debugger to safely update hw breakpoint reservations. The possibility for a breakpoint reservation to be concurrently processed at the time that kgdb interrupts the system is improbable. Should this corner case occur the end user is warned, and the kernel debugger will prohibit updating the hardware breakpoint reservations. Any time the kernel debugger reserves a hardware breakpoint it will be a system wide reservation. Signed-off-by: Jason Wessel Acked-by: Frederic Weisbecker Cc: kgdb-bugreport@lists.sourceforge.net Cc: K.Prasad Cc: Peter Zijlstra Cc: Alan Stern Cc: torvalds@linux-foundation.org LKML-Reference: <1264719883-7285-3-git-send-email-jason.wessel@windriver.com> Signed-off-by: Ingo Molnar --- include/linux/hw_breakpoint.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/hw_breakpoint.h b/include/linux/hw_breakpoint.h index 41235c93e4e9..070ba0621738 100644 --- a/include/linux/hw_breakpoint.h +++ b/include/linux/hw_breakpoint.h @@ -75,6 +75,8 @@ extern int __register_perf_hw_breakpoint(struct perf_event *bp); extern void unregister_hw_breakpoint(struct perf_event *bp); extern void unregister_wide_hw_breakpoint(struct perf_event **cpu_events); +extern int dbg_reserve_bp_slot(struct perf_event *bp); +extern int dbg_release_bp_slot(struct perf_event *bp); extern int reserve_bp_slot(struct perf_event *bp); extern void release_bp_slot(struct perf_event *bp); -- cgit v1.2.3