From 59796edcf21c7c19d58a223001f9ed13746c51c2 Mon Sep 17 00:00:00 2001 From: Prarit Bhargava Date: Thu, 10 Sep 2015 10:17:59 +0300 Subject: mei: make modules.alias UUID information easier to read scripts/mod/file2alias.c:add_uuid() convert UUID into a single string which does not conform to the standard little endian UUID formatting. This patch changes add_uuid() to output same format as %pUL and modifies the mei driver to match the change. Signed-off-by: Prarit Bhargava Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- include/linux/mod_devicetable.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index 688997a24aad..5e8a0ad22cbc 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -601,10 +601,6 @@ struct ipack_device_id { #define MEI_CL_MODULE_PREFIX "mei:" #define MEI_CL_NAME_SIZE 32 -#define MEI_CL_UUID_FMT "%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x" -#define MEI_CL_UUID_ARGS(_u) \ - _u[0], _u[1], _u[2], _u[3], _u[4], _u[5], _u[6], _u[7], \ - _u[8], _u[9], _u[10], _u[11], _u[12], _u[13], _u[14], _u[15] /** * struct mei_cl_device_id - MEI client device identifier -- cgit v1.2.3 From b26864cad1c9f66f4966726ba7bc81d2b9b8f990 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 10 Sep 2015 10:18:01 +0300 Subject: mei: bus: add client protocol version to the device alias The device alias now looks like mei:S:uuid:N:* In that way we can bind different drivers to clients with different protocol versions if required. Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- include/linux/mod_devicetable.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index 5e8a0ad22cbc..6975cbf1435b 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -601,11 +601,13 @@ struct ipack_device_id { #define MEI_CL_MODULE_PREFIX "mei:" #define MEI_CL_NAME_SIZE 32 +#define MEI_CL_VERSION_ANY 0xff /** * struct mei_cl_device_id - MEI client device identifier * @name: helper name * @uuid: client uuid + * @version: client protocol version * @driver_info: information used by the driver. * * identifies mei client device by uuid and name @@ -613,6 +615,7 @@ struct ipack_device_id { struct mei_cl_device_id { char name[MEI_CL_NAME_SIZE]; uuid_le uuid; + __u8 version; kernel_ulong_t driver_info; }; -- cgit v1.2.3 From baeacd0376975bee0fdf6378e1c24587ab0b6ad4 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 10 Sep 2015 10:18:02 +0300 Subject: mei: bus: export uuid and protocol version to mei_cl bus drivers Export the uuid and the protocol version of the underlying me client for me client bus drivers usage. Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- include/linux/mei_cl_bus.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mei_cl_bus.h b/include/linux/mei_cl_bus.h index 0962b2ca628a..9834f832b098 100644 --- a/include/linux/mei_cl_bus.h +++ b/include/linux/mei_cl_bus.h @@ -85,6 +85,9 @@ int mei_cl_register_event_cb(struct mei_cl_device *device, #define MEI_CL_EVENT_TX 1 #define MEI_CL_EVENT_NOTIF 2 +const uuid_le *mei_cldev_uuid(const struct mei_cl_device *cldev); +u8 mei_cldev_ver(const struct mei_cl_device *cldev); + void *mei_cl_get_drvdata(const struct mei_cl_device *device); void mei_cl_set_drvdata(struct mei_cl_device *device, void *data); -- cgit v1.2.3 From 01a14edeaf0456c28e2b9af3afdc0807ec6c20bd Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 10 Sep 2015 10:18:03 +0300 Subject: mei: bus: export mei_cldev_enabled function Let me client device driver query of the device is connected and hence enabled. Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- include/linux/mei_cl_bus.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mei_cl_bus.h b/include/linux/mei_cl_bus.h index 9834f832b098..30d1c8b94a27 100644 --- a/include/linux/mei_cl_bus.h +++ b/include/linux/mei_cl_bus.h @@ -93,5 +93,6 @@ void mei_cl_set_drvdata(struct mei_cl_device *device, void *data); int mei_cl_enable_device(struct mei_cl_device *device); int mei_cl_disable_device(struct mei_cl_device *device); +bool mei_cldev_enabled(struct mei_cl_device *cldev); #endif /* _LINUX_MEI_CL_BUS_H */ -- cgit v1.2.3 From 893913822e829f7a37824f6041ff964076374191 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 10 Sep 2015 10:18:04 +0300 Subject: mei: bus: complete variable rename of type struct mei_cl_device In the commit 5c079ae11921 ("mei: bus: fix drivers and devices names confusion") we set the variables of type struct mei_cl_device to 'cldev' but few places were left out, namely mei_cl_bus.h header and the mei nfc drivers. Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- include/linux/mei_cl_bus.h | 29 ++++++++++++++--------------- 1 file changed, 14 insertions(+), 15 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mei_cl_bus.h b/include/linux/mei_cl_bus.h index 30d1c8b94a27..c364df750405 100644 --- a/include/linux/mei_cl_bus.h +++ b/include/linux/mei_cl_bus.h @@ -8,7 +8,7 @@ struct mei_cl_device; struct mei_device; -typedef void (*mei_cl_event_cb_t)(struct mei_cl_device *device, +typedef void (*mei_cl_event_cb_t)(struct mei_cl_device *cldev, u32 events, void *context); /** @@ -62,22 +62,21 @@ struct mei_cl_driver { const struct mei_cl_device_id *id_table; - int (*probe)(struct mei_cl_device *dev, + int (*probe)(struct mei_cl_device *cldev, const struct mei_cl_device_id *id); - int (*remove)(struct mei_cl_device *dev); + int (*remove)(struct mei_cl_device *cldev); }; -int __mei_cl_driver_register(struct mei_cl_driver *driver, - struct module *owner); -#define mei_cl_driver_register(driver) \ - __mei_cl_driver_register(driver, THIS_MODULE) +int __mei_cl_driver_register(struct mei_cl_driver *cldrv, struct module *owner); +#define mei_cl_driver_register(cldrv) \ + __mei_cl_driver_register(cldrv, THIS_MODULE) -void mei_cl_driver_unregister(struct mei_cl_driver *driver); +void mei_cl_driver_unregister(struct mei_cl_driver *cldrv); -ssize_t mei_cl_send(struct mei_cl_device *device, u8 *buf, size_t length); -ssize_t mei_cl_recv(struct mei_cl_device *device, u8 *buf, size_t length); +ssize_t mei_cl_send(struct mei_cl_device *cldev, u8 *buf, size_t length); +ssize_t mei_cl_recv(struct mei_cl_device *cldev, u8 *buf, size_t length); -int mei_cl_register_event_cb(struct mei_cl_device *device, +int mei_cl_register_event_cb(struct mei_cl_device *cldev, unsigned long event_mask, mei_cl_event_cb_t read_cb, void *context); @@ -88,11 +87,11 @@ int mei_cl_register_event_cb(struct mei_cl_device *device, const uuid_le *mei_cldev_uuid(const struct mei_cl_device *cldev); u8 mei_cldev_ver(const struct mei_cl_device *cldev); -void *mei_cl_get_drvdata(const struct mei_cl_device *device); -void mei_cl_set_drvdata(struct mei_cl_device *device, void *data); +void *mei_cl_get_drvdata(const struct mei_cl_device *cldev); +void mei_cl_set_drvdata(struct mei_cl_device *cldev, void *data); -int mei_cl_enable_device(struct mei_cl_device *device); -int mei_cl_disable_device(struct mei_cl_device *device); +int mei_cl_enable_device(struct mei_cl_device *cldev); +int mei_cl_disable_device(struct mei_cl_device *cldev); bool mei_cldev_enabled(struct mei_cl_device *cldev); #endif /* _LINUX_MEI_CL_BUS_H */ -- cgit v1.2.3 From d49dc5e76fc917e5dfef76cb56fe3b3868deed5d Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 10 Sep 2015 10:18:05 +0300 Subject: mei: bus: use mei_cldev_ prefix for the API functions Use mei_cldev_ prefix for all mei client bus api functions in order to resolve prefix conflict with functions that handle client function and are defined in client.c Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- include/linux/mei_cl_bus.h | 33 +++++++++++++++++---------------- 1 file changed, 17 insertions(+), 16 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mei_cl_bus.h b/include/linux/mei_cl_bus.h index c364df750405..e746919530f5 100644 --- a/include/linux/mei_cl_bus.h +++ b/include/linux/mei_cl_bus.h @@ -8,8 +8,8 @@ struct mei_cl_device; struct mei_device; -typedef void (*mei_cl_event_cb_t)(struct mei_cl_device *cldev, - u32 events, void *context); +typedef void (*mei_cldev_event_cb_t)(struct mei_cl_device *cldev, + u32 events, void *context); /** * struct mei_cl_device - MEI device handle @@ -45,7 +45,7 @@ struct mei_cl_device { char name[MEI_CL_NAME_SIZE]; struct work_struct event_work; - mei_cl_event_cb_t event_cb; + mei_cldev_event_cb_t event_cb; void *event_context; unsigned long events_mask; unsigned long events; @@ -67,18 +67,19 @@ struct mei_cl_driver { int (*remove)(struct mei_cl_device *cldev); }; -int __mei_cl_driver_register(struct mei_cl_driver *cldrv, struct module *owner); -#define mei_cl_driver_register(cldrv) \ - __mei_cl_driver_register(cldrv, THIS_MODULE) +int __mei_cldev_driver_register(struct mei_cl_driver *cldrv, + struct module *owner); +#define mei_cldev_driver_register(cldrv) \ + __mei_cldev_driver_register(cldrv, THIS_MODULE) -void mei_cl_driver_unregister(struct mei_cl_driver *cldrv); +void mei_cldev_driver_unregister(struct mei_cl_driver *cldrv); -ssize_t mei_cl_send(struct mei_cl_device *cldev, u8 *buf, size_t length); -ssize_t mei_cl_recv(struct mei_cl_device *cldev, u8 *buf, size_t length); +ssize_t mei_cldev_send(struct mei_cl_device *cldev, u8 *buf, size_t length); +ssize_t mei_cldev_recv(struct mei_cl_device *cldev, u8 *buf, size_t length); -int mei_cl_register_event_cb(struct mei_cl_device *cldev, - unsigned long event_mask, - mei_cl_event_cb_t read_cb, void *context); +int mei_cldev_register_event_cb(struct mei_cl_device *cldev, + unsigned long event_mask, + mei_cldev_event_cb_t read_cb, void *context); #define MEI_CL_EVENT_RX 0 #define MEI_CL_EVENT_TX 1 @@ -87,11 +88,11 @@ int mei_cl_register_event_cb(struct mei_cl_device *cldev, const uuid_le *mei_cldev_uuid(const struct mei_cl_device *cldev); u8 mei_cldev_ver(const struct mei_cl_device *cldev); -void *mei_cl_get_drvdata(const struct mei_cl_device *cldev); -void mei_cl_set_drvdata(struct mei_cl_device *cldev, void *data); +void *mei_cldev_get_drvdata(const struct mei_cl_device *cldev); +void mei_cldev_set_drvdata(struct mei_cl_device *cldev, void *data); -int mei_cl_enable_device(struct mei_cl_device *cldev); -int mei_cl_disable_device(struct mei_cl_device *cldev); +int mei_cldev_enable(struct mei_cl_device *cldev); +int mei_cldev_disable(struct mei_cl_device *cldev); bool mei_cldev_enabled(struct mei_cl_device *cldev); #endif /* _LINUX_MEI_CL_BUS_H */ -- cgit v1.2.3 From ff6f46483f0e14b829cd5a71bafcbb1c136a84b6 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Thu, 10 Sep 2015 15:06:20 -0700 Subject: spmi: Auto-populate driver.owner in spmi_driver_register() Populate the owner field of the spmi driver when spmi_driver_register() is called in a similar fashion to how other *_driver_register() functions do it. This saves driver writers from having to do this themselves. Cc: Andy Gross Cc: Gilad Avidov Signed-off-by: Stephen Boyd Signed-off-by: Greg Kroah-Hartman --- include/linux/spmi.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/spmi.h b/include/linux/spmi.h index f84212cd3b7d..1396a255d2a2 100644 --- a/include/linux/spmi.h +++ b/include/linux/spmi.h @@ -153,7 +153,9 @@ static inline struct spmi_driver *to_spmi_driver(struct device_driver *d) return container_of(d, struct spmi_driver, driver); } -int spmi_driver_register(struct spmi_driver *sdrv); +#define spmi_driver_register(sdrv) \ + __spmi_driver_register(sdrv, THIS_MODULE) +int __spmi_driver_register(struct spmi_driver *sdrv, struct module *owner); /** * spmi_driver_unregister() - unregister an SPMI client driver -- cgit v1.2.3 From b05b7c7cc0324524dcda7fa7c2be1255290ee416 Mon Sep 17 00:00:00 2001 From: Muhammad Hamza Farooq Date: Fri, 11 Sep 2015 16:42:38 +0200 Subject: ti-st: use worker instead of calling st_int_write in wake up The wake up method is called with the port lock held. The st_int_write method calls port->ops->write with tries to acquire the lock again, causing CPU to wait infinitely. Right way to do is to write data to port in worker thread. Signed-off-by: Muhammad Hamza Farooq Signed-off-by: Jacob Siverskog Signed-off-by: Greg Kroah-Hartman --- include/linux/ti_wilink_st.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/ti_wilink_st.h b/include/linux/ti_wilink_st.h index d4217eff489f..0a0d56834c8e 100644 --- a/include/linux/ti_wilink_st.h +++ b/include/linux/ti_wilink_st.h @@ -158,6 +158,7 @@ struct st_data_s { unsigned long ll_state; void *kim_data; struct tty_struct *tty; + struct work_struct work_write_wakeup; }; /* -- cgit v1.2.3 From e76e397a7f99bffbd91fb21f96370cbb165b5bcd Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Wed, 16 Sep 2015 10:42:13 +0100 Subject: mfd: arizona: Add registers for ADC microphone detection The newer devices support using a software comparison to determine whether a 3/4 pole jack is present. Add the registers necessary for this. Signed-off-by: Charles Keepax Acked-by: Lee Jones Signed-off-by: Chanwoo Choi --- include/linux/mfd/arizona/pdata.h | 3 +++ include/linux/mfd/arizona/registers.h | 6 +++--- 2 files changed, 6 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h index 1dc385850ba2..92f31ffaf866 100644 --- a/include/linux/mfd/arizona/pdata.h +++ b/include/linux/mfd/arizona/pdata.h @@ -124,6 +124,9 @@ struct arizona_pdata { /** Channel to use for headphone detection */ unsigned int hpdet_channel; + /** Use software comparison to determine mic presence */ + bool micd_software_compare; + /** Extra debounce timeout used during initial mic detection (ms) */ unsigned int micd_detect_debounce; diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h index fdd70b3c7418..ab219c9b0b08 100644 --- a/include/linux/mfd/arizona/registers.h +++ b/include/linux/mfd/arizona/registers.h @@ -2359,9 +2359,9 @@ #define ARIZONA_ACCDET_SRC_MASK 0x2000 /* ACCDET_SRC */ #define ARIZONA_ACCDET_SRC_SHIFT 13 /* ACCDET_SRC */ #define ARIZONA_ACCDET_SRC_WIDTH 1 /* ACCDET_SRC */ -#define ARIZONA_ACCDET_MODE_MASK 0x0003 /* ACCDET_MODE - [1:0] */ -#define ARIZONA_ACCDET_MODE_SHIFT 0 /* ACCDET_MODE - [1:0] */ -#define ARIZONA_ACCDET_MODE_WIDTH 2 /* ACCDET_MODE - [1:0] */ +#define ARIZONA_ACCDET_MODE_MASK 0x0007 /* ACCDET_MODE - [2:0] */ +#define ARIZONA_ACCDET_MODE_SHIFT 0 /* ACCDET_MODE - [2:0] */ +#define ARIZONA_ACCDET_MODE_WIDTH 3 /* ACCDET_MODE - [2:0] */ /* * R667 (0x29B) - Headphone Detect 1 -- cgit v1.2.3 From 1ce376897e02e623ba357594604ca655df61053b Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Wed, 16 Sep 2015 10:42:14 +0100 Subject: mfd: arizona: Add register bits for general purpose switch The switch is typically used in conjunction with the MICDET clamp in order to suppress pops and clicks associated with jack insertion. Signed-off-by: Charles Keepax Acked-by: Lee Jones Signed-off-by: Chanwoo Choi --- include/linux/mfd/arizona/pdata.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h index 92f31ffaf866..57b45caaea80 100644 --- a/include/linux/mfd/arizona/pdata.h +++ b/include/linux/mfd/arizona/pdata.h @@ -184,6 +184,9 @@ struct arizona_pdata { /** GPIO for primary IRQ (used for edge triggered emulation) */ int irq_gpio; + + /** General purpose switch control */ + unsigned int gpsw; }; #endif -- cgit v1.2.3 From b8ba9edb911102b452c815879f520bfe2713fab6 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Wed, 16 Sep 2015 10:42:15 +0100 Subject: mfd: arizona: Add TST_CAP bits for headphone detection On wm5110/8280 some additional settings are required to get accurate measurements at the top end of the headphone detection range. This patch adds the bits required for this. Signed-off-by: Charles Keepax Acked-by: Lee Jones Signed-off-by: Chanwoo Choi --- include/linux/mfd/arizona/registers.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h index ab219c9b0b08..c7c11c900196 100644 --- a/include/linux/mfd/arizona/registers.h +++ b/include/linux/mfd/arizona/registers.h @@ -242,6 +242,7 @@ #define ARIZONA_HP1_SHORT_CIRCUIT_CTRL 0x4A0 #define ARIZONA_HP2_SHORT_CIRCUIT_CTRL 0x4A1 #define ARIZONA_HP3_SHORT_CIRCUIT_CTRL 0x4A2 +#define ARIZONA_HP_TEST_CTRL_1 0x4A4 #define ARIZONA_SPK_CTRL_2 0x4B5 #define ARIZONA_SPK_CTRL_3 0x4B6 #define ARIZONA_DAC_COMP_1 0x4DC @@ -3701,6 +3702,13 @@ #define ARIZONA_HP3_SC_ENA_SHIFT 12 /* HP3_SC_ENA */ #define ARIZONA_HP3_SC_ENA_WIDTH 1 /* HP3_SC_ENA */ +/* + * R1188 (0x4A4) HP Test Ctrl 1 + */ +#define ARIZONA_HP1_TST_CAP_SEL_MASK 0x0003 /* HP1_TST_CAP_SEL - [1:0] */ +#define ARIZONA_HP1_TST_CAP_SEL_SHIFT 0 /* HP1_TST_CAP_SEL - [1:0] */ +#define ARIZONA_HP1_TST_CAP_SEL_WIDTH 2 /* HP1_TST_CAP_SEL - [1:0] */ + /* * R1244 (0x4DC) - DAC comp 1 */ -- cgit v1.2.3 From ce6f7496050e29108bcefe0413df1789648fb38f Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Tue, 29 Sep 2015 22:57:24 +0900 Subject: extcon: gpio: Add the missing supported_cable parameter to devm_extcon_dev_allocate() The commit 2a9de9c0 ("extcon: Use the unique id for external connector instead of string") defines the unique id of each external connector to identify the type of external connector instead of string name. So, devm_extcon_dev_allocate() should include the second parameter (unsigned int *supported_cable). This patch adds the supported_cable parameter which is passed by platform data. Signed-off-by: Chanwoo Choi --- include/linux/extcon/extcon-gpio.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/extcon/extcon-gpio.h b/include/linux/extcon/extcon-gpio.h index 0b17ad43fbfc..232bb8f80b51 100644 --- a/include/linux/extcon/extcon-gpio.h +++ b/include/linux/extcon/extcon-gpio.h @@ -26,6 +26,7 @@ /** * struct gpio_extcon_platform_data - A simple GPIO-controlled extcon device. * @name: The name of this GPIO extcon device. + * @extcon_id: The unique id of specific external connector. * @gpio: Corresponding GPIO. * @gpio_active_low: Boolean describing whether gpio active state is 1 or 0 * If true, low state of gpio means active. @@ -45,6 +46,7 @@ */ struct gpio_extcon_platform_data { const char *name; + unsigned int extcon_id; unsigned gpio; bool gpio_active_low; unsigned long debounce; -- cgit v1.2.3 From 6ba129974a3d6bcb236cbd96aa1db6001d163678 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Tue, 29 Sep 2015 22:59:55 +0900 Subject: extcon: gpio: Fix minor coding style and remove the unused fields. This patch fixes the minor coding style about indentation and removes the unused fields from struct gpio_extcon_platform_data. Signed-off-by: Chanwoo Choi --- include/linux/extcon/extcon-gpio.h | 22 ++++------------------ 1 file changed, 4 insertions(+), 18 deletions(-) (limited to 'include/linux') diff --git a/include/linux/extcon/extcon-gpio.h b/include/linux/extcon/extcon-gpio.h index 232bb8f80b51..7cacafb78b09 100644 --- a/include/linux/extcon/extcon-gpio.h +++ b/include/linux/extcon/extcon-gpio.h @@ -1,5 +1,5 @@ /* - * External connector (extcon) class generic GPIO driver + * Single-state GPIO extcon driver based on extcon class * * Copyright (C) 2012 Samsung Electronics * Author: MyungJoo Ham @@ -16,16 +16,14 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * -*/ + */ #ifndef __EXTCON_GPIO_H__ #define __EXTCON_GPIO_H__ __FILE__ #include /** - * struct gpio_extcon_platform_data - A simple GPIO-controlled extcon device. - * @name: The name of this GPIO extcon device. + * struct gpio_extcon_pdata - A simple GPIO-controlled extcon device. * @extcon_id: The unique id of specific external connector. * @gpio: Corresponding GPIO. * @gpio_active_low: Boolean describing whether gpio active state is 1 or 0 @@ -33,28 +31,16 @@ * If false, high state of gpio means active. * @debounce: Debounce time for GPIO IRQ in ms. * @irq_flags: IRQ Flags (e.g., IRQF_TRIGGER_LOW). - * @state_on: print_state is overriden with state_on if attached. - * If NULL, default method of extcon class is used. - * @state_off: print_state is overriden with state_off if detached. - * If NUll, default method of extcon class is used. * @check_on_resume: Boolean describing whether to check the state of gpio * while resuming from sleep. - * - * Note that in order for state_on or state_off to be valid, both state_on - * and state_off should be not NULL. If at least one of them is NULL, - * the print_state is not overriden. */ -struct gpio_extcon_platform_data { - const char *name; +struct gpio_extcon_pdata { unsigned int extcon_id; unsigned gpio; bool gpio_active_low; unsigned long debounce; unsigned long irq_flags; - /* if NULL, "0" or "1" will be printed */ - const char *state_on; - const char *state_off; bool check_on_resume; }; -- cgit v1.2.3 From 09e8b485ee4212f78bf27c8d727845919f85cf1f Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Tue, 29 Sep 2015 18:07:02 -0700 Subject: iommu: iova: Move iova cache management to the iova library This is necessary to separate intel-iommu from the iova library. Signed-off-by: Sakari Ailus Signed-off-by: David Woodhouse Signed-off-by: Greg Kroah-Hartman --- include/linux/iova.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/iova.h b/include/linux/iova.h index 3920a19d8194..92f7177db2ce 100644 --- a/include/linux/iova.h +++ b/include/linux/iova.h @@ -68,8 +68,8 @@ static inline unsigned long iova_pfn(struct iova_domain *iovad, dma_addr_t iova) return iova >> iova_shift(iovad); } -int iommu_iova_cache_init(void); -void iommu_iova_cache_destroy(void); +int iova_cache_get(void); +void iova_cache_put(void); struct iova *alloc_iova_mem(void); void free_iova_mem(struct iova *iova); -- cgit v1.2.3 From ff39988abd70bcd1b14a4c81f2d102e67b8db580 Mon Sep 17 00:00:00 2001 From: Siva Yerramreddy Date: Tue, 29 Sep 2015 18:09:37 -0700 Subject: dma: Add support to program MIC x100 status descriptiors The MIC X100 DMA engine has a special status descriptor which writes an 8 byte value to a destination location. This is used to signal completion of all DMA descriptors prior to the status descriptor. This patch add a new DMA engine API which enables updating a destination address with an 8 byte immediate data value. Reviewed-by: Nikhil Rao Reviewed-by: Ashutosh Dixit Signed-off-by: Lawrynowicz, Jacek Signed-off-by: Sudeep Dutt Signed-off-by: Siva Yerramreddy Signed-off-by: Greg Kroah-Hartman --- include/linux/dmaengine.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 7ea9184eaa13..c47c68e535e8 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -645,6 +645,7 @@ enum dmaengine_alignment { * The function takes a buffer of size buf_len. The callback function will * be called after period_len bytes have been transferred. * @device_prep_interleaved_dma: Transfer expression in a generic way. + * @device_prep_dma_imm_data: DMA's 8 byte immediate data to the dst address * @device_config: Pushes a new configuration to a channel, return 0 or an error * code * @device_pause: Pauses any transfer happening on a channel. Returns @@ -727,6 +728,9 @@ struct dma_device { struct dma_async_tx_descriptor *(*device_prep_interleaved_dma)( struct dma_chan *chan, struct dma_interleaved_template *xt, unsigned long flags); + struct dma_async_tx_descriptor *(*device_prep_dma_imm_data)( + struct dma_chan *chan, dma_addr_t dst, u64 data, + unsigned long flags); int (*device_config)(struct dma_chan *chan, struct dma_slave_config *config); -- cgit v1.2.3 From b7f944411b4a628443f84a542858a8c78847bb48 Mon Sep 17 00:00:00 2001 From: Ashutosh Dixit Date: Tue, 29 Sep 2015 18:10:44 -0700 Subject: misc: mic: SCIF poll SCIF poll allows both user and kernel mode clients to wait on events on a SCIF endpoint. These events include availability of space or data in the SCIF ring buffer, availability of connection requests on a listening endpoint and completion of connections when using async connects. Reviewed-by: Nikhil Rao Reviewed-by: Sudeep Dutt Signed-off-by: Ashutosh Dixit Signed-off-by: Greg Kroah-Hartman --- include/linux/scif.h | 74 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 74 insertions(+) (limited to 'include/linux') diff --git a/include/linux/scif.h b/include/linux/scif.h index 44f4f3898bbe..b1923ad2ddd3 100644 --- a/include/linux/scif.h +++ b/include/linux/scif.h @@ -93,6 +93,18 @@ enum { typedef struct scif_endpt *scif_epd_t; +/** + * struct scif_pollepd - SCIF endpoint to be monitored via scif_poll + * @epd: SCIF endpoint + * @events: requested events + * @revents: returned events + */ +struct scif_pollepd { + scif_epd_t epd; + short events; + short revents; +}; + #define SCIF_OPEN_FAILED ((scif_epd_t)-1) #define SCIF_REGISTER_FAILED ((off_t)-1) #define SCIF_MMAP_FAILED ((void *)-1) @@ -990,4 +1002,66 @@ int scif_fence_signal(scif_epd_t epd, off_t loff, u64 lval, off_t roff, */ int scif_get_node_ids(u16 *nodes, int len, u16 *self); +/** + * scif_poll() - Wait for some event on an endpoint + * @epds: Array of endpoint descriptors + * @nepds: Length of epds + * @timeout: Upper limit on time for which scif_poll() will block + * + * scif_poll() waits for one of a set of endpoints to become ready to perform + * an I/O operation. + * + * The epds argument specifies the endpoint descriptors to be examined and the + * events of interest for each endpoint descriptor. epds is a pointer to an + * array with one member for each open endpoint descriptor of interest. + * + * The number of items in the epds array is specified in nepds. The epd field + * of scif_pollepd is an endpoint descriptor of an open endpoint. The field + * events is a bitmask specifying the events which the application is + * interested in. The field revents is an output parameter, filled by the + * kernel with the events that actually occurred. The bits returned in revents + * can include any of those specified in events, or one of the values POLLERR, + * POLLHUP, or POLLNVAL. (These three bits are meaningless in the events + * field, and will be set in the revents field whenever the corresponding + * condition is true.) + * + * If none of the events requested (and no error) has occurred for any of the + * endpoint descriptors, then scif_poll() blocks until one of the events occurs. + * + * The timeout argument specifies an upper limit on the time for which + * scif_poll() will block, in milliseconds. Specifying a negative value in + * timeout means an infinite timeout. + * + * The following bits may be set in events and returned in revents. + * POLLIN - Data may be received without blocking. For a connected + * endpoint, this means that scif_recv() may be called without blocking. For a + * listening endpoint, this means that scif_accept() may be called without + * blocking. + * POLLOUT - Data may be sent without blocking. For a connected endpoint, this + * means that scif_send() may be called without blocking. POLLOUT may also be + * used to block waiting for a non-blocking connect to complete. This bit value + * has no meaning for a listening endpoint and is ignored if specified. + * + * The following bits are only returned in revents, and are ignored if set in + * events. + * POLLERR - An error occurred on the endpoint + * POLLHUP - The connection to the peer endpoint was disconnected + * POLLNVAL - The specified endpoint descriptor is invalid. + * + * Return: + * Upon successful completion, scif_poll() returns a non-negative value. A + * positive value indicates the total number of endpoint descriptors that have + * been selected (that is, endpoint descriptors for which the revents member is + * non-zero). A value of 0 indicates that the call timed out and no endpoint + * descriptors have been selected. Otherwise in user mode -1 is returned and + * errno is set to indicate the error; in kernel mode the negative of one of + * the following errors is returned. + * + * Errors: + * EINTR - A signal occurred before any requested event + * EINVAL - The nepds argument is greater than {OPEN_MAX} + * ENOMEM - There was no space to allocate file descriptor tables + */ +int scif_poll(struct scif_pollepd *epds, unsigned int nepds, long timeout); + #endif /* __SCIF_H__ */ -- cgit v1.2.3 From d3d912eb7386b7512f131b34407978cecccb3703 Mon Sep 17 00:00:00 2001 From: Ashutosh Dixit Date: Tue, 29 Sep 2015 18:11:15 -0700 Subject: misc: mic: Add support for kernel mode SCIF clients Add support for registration/de-registration of kernel mode SCIF clients. SCIF clients are probed with new and existing SCIF peer devices. Similarly the client remove method is called when SCIF peer devices are removed. Changes to SCIF peer device framework necessitated by supporting kernel mode SCIF clients are also included in this patch. Reviewed-by: Nikhil Rao Reviewed-by: Sudeep Dutt Signed-off-by: Ashutosh Dixit Signed-off-by: Greg Kroah-Hartman --- include/linux/scif.h | 58 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+) (limited to 'include/linux') diff --git a/include/linux/scif.h b/include/linux/scif.h index b1923ad2ddd3..fd62c051b166 100644 --- a/include/linux/scif.h +++ b/include/linux/scif.h @@ -55,6 +55,7 @@ #include #include +#include #include #define SCIF_ACCEPT_SYNC 1 @@ -105,6 +106,37 @@ struct scif_pollepd { short revents; }; +/** + * scif_peer_dev - representation of a peer SCIF device + * + * Peer devices show up as PCIe devices for the mgmt node but not the cards. + * The mgmt node discovers all the cards on the PCIe bus and informs the other + * cards about their peers. Upon notification of a peer a node adds a peer + * device to the peer bus to maintain symmetry in the way devices are + * discovered across all nodes in the SCIF network. + * + * @dev: underlying device + * @dnode - The destination node which this device will communicate with. + */ +struct scif_peer_dev { + struct device dev; + u8 dnode; +}; + +/** + * scif_client - representation of a SCIF client + * @name: client name + * @probe - client method called when a peer device is registered + * @remove - client method called when a peer device is unregistered + * @si - subsys_interface used internally for implementing SCIF clients + */ +struct scif_client { + const char *name; + void (*probe)(struct scif_peer_dev *spdev); + void (*remove)(struct scif_peer_dev *spdev); + struct subsys_interface si; +}; + #define SCIF_OPEN_FAILED ((scif_epd_t)-1) #define SCIF_REGISTER_FAILED ((off_t)-1) #define SCIF_MMAP_FAILED ((void *)-1) @@ -1064,4 +1096,30 @@ int scif_get_node_ids(u16 *nodes, int len, u16 *self); */ int scif_poll(struct scif_pollepd *epds, unsigned int nepds, long timeout); +/** + * scif_client_register() - Register a SCIF client + * @client: client to be registered + * + * scif_client_register() registers a SCIF client. The probe() method + * of the client is called when SCIF peer devices come online and the + * remove() method is called when the peer devices disappear. + * + * Return: + * Upon successful completion, scif_client_register() returns a non-negative + * value. Otherwise the return value is the same as subsys_interface_register() + * in the kernel. + */ +int scif_client_register(struct scif_client *client); + +/** + * scif_client_unregister() - Unregister a SCIF client + * @client: client to be unregistered + * + * scif_client_unregister() unregisters a SCIF client. + * + * Return: + * None + */ +void scif_client_unregister(struct scif_client *client); + #endif /* __SCIF_H__ */ -- cgit v1.2.3 From d411e79391092925457d89b77d7cd3038ba6d04b Mon Sep 17 00:00:00 2001 From: Ashutosh Dixit Date: Tue, 29 Sep 2015 18:13:54 -0700 Subject: misc: mic: Remove COSM functionality from the MIC card driver Since card side COSM functionality, to trigger MIC device shutdowns and communicate shutdown status to the host, is now moved into a separate COSM client driver, this patch removes this functionality from the base MIC card driver. The mic_bus driver is also updated to use the device index provided by COSM rather than maintain its own device index. Reviewed-by: Nikhil Rao Reviewed-by: Sudeep Dutt Signed-off-by: Ashutosh Dixit Signed-off-by: Greg Kroah-Hartman --- include/linux/mic_bus.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mic_bus.h b/include/linux/mic_bus.h index d5b5f76d57ef..27d7c95fd0da 100644 --- a/include/linux/mic_bus.h +++ b/include/linux/mic_bus.h @@ -91,7 +91,8 @@ struct mbus_hw_ops { struct mbus_device * mbus_register_device(struct device *pdev, int id, struct dma_map_ops *dma_ops, - struct mbus_hw_ops *hw_ops, void __iomem *mmio_va); + struct mbus_hw_ops *hw_ops, int index, + void __iomem *mmio_va); void mbus_unregister_device(struct mbus_device *mbdev); int mbus_register_driver(struct mbus_driver *drv); -- cgit v1.2.3 From a44f2630d78bfafc8eb5ab7d8b7b8cd4642ba749 Mon Sep 17 00:00:00 2001 From: Sudeep Dutt Date: Tue, 29 Sep 2015 18:15:03 -0700 Subject: misc: mic: SCIF RMA header file and IOCTL changes This patch updates the SCIF header file and IOCTL interface with the changes required to support RMAs. APIs added include the ability to pin pages and register those pages with SCIF. SCIF kernel clients can also add references to remote registered pages and access them via the CPU. The user space IOCTL interface has been updated to enable SCIF registration, RDMA/CPU copies and fence APIs for RDMA synchronization. Reviewed-by: Nikhil Rao Reviewed-by: Ashutosh Dixit Signed-off-by: Sudeep Dutt Signed-off-by: Greg Kroah-Hartman --- include/linux/scif.h | 234 ++++++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 224 insertions(+), 10 deletions(-) (limited to 'include/linux') diff --git a/include/linux/scif.h b/include/linux/scif.h index fd62c051b166..49a35d6edc94 100644 --- a/include/linux/scif.h +++ b/include/linux/scif.h @@ -93,6 +93,27 @@ enum { #define SCIF_PORT_RSVD 1088 typedef struct scif_endpt *scif_epd_t; +typedef struct scif_pinned_pages *scif_pinned_pages_t; + +/** + * struct scif_range - SCIF registered range used in kernel mode + * @cookie: cookie used internally by SCIF + * @nr_pages: number of pages of PAGE_SIZE + * @prot_flags: R/W protection + * @phys_addr: Array of bus addresses + * @va: Array of kernel virtual addresses backed by the pages in the phys_addr + * array. The va is populated only when called on the host for a remote + * SCIF connection on MIC. This is required to support the use case of DMA + * between MIC and another device which is not a SCIF node e.g., an IB or + * ethernet NIC. + */ +struct scif_range { + void *cookie; + int nr_pages; + int prot_flags; + dma_addr_t *phys_addr; + void __iomem **va; +}; /** * struct scif_pollepd - SCIF endpoint to be monitored via scif_poll @@ -389,7 +410,6 @@ int scif_close(scif_epd_t epd); * Errors: * EBADF, ENOTTY - epd is not a valid endpoint descriptor * ECONNRESET - Connection reset by peer - * EFAULT - An invalid address was specified for a parameter * EINVAL - flags is invalid, or len is negative * ENODEV - The remote node is lost or existed, but is not currently in the * network since it may have crashed @@ -442,7 +462,6 @@ int scif_send(scif_epd_t epd, void *msg, int len, int flags); * EAGAIN - The destination node is returning from a low power state * EBADF, ENOTTY - epd is not a valid endpoint descriptor * ECONNRESET - Connection reset by peer - * EFAULT - An invalid address was specified for a parameter * EINVAL - flags is invalid, or len is negative * ENODEV - The remote node is lost or existed, but is not currently in the * network since it may have crashed @@ -505,9 +524,6 @@ int scif_recv(scif_epd_t epd, void *msg, int len, int flags); * SCIF_PROT_READ - allow read operations from the window * SCIF_PROT_WRITE - allow write operations to the window * - * The map_flags argument can be set to SCIF_MAP_FIXED which interprets a - * fixed offset. - * * Return: * Upon successful completion, scif_register() returns the offset at which the * mapping was placed (po); otherwise in user mode SCIF_REGISTER_FAILED (that @@ -520,7 +536,6 @@ int scif_recv(scif_epd_t epd, void *msg, int len, int flags); * EAGAIN - The mapping could not be performed due to lack of resources * EBADF, ENOTTY - epd is not a valid endpoint descriptor * ECONNRESET - Connection reset by peer - * EFAULT - Addresses in the range [addr, addr + len - 1] are invalid * EINVAL - map_flags is invalid, or prot_flags is invalid, or SCIF_MAP_FIXED is * set in flags, and offset is not a multiple of the page size, or addr is not a * multiple of the page size, or len is not a multiple of the page size, or is @@ -803,7 +818,6 @@ int scif_writeto(scif_epd_t epd, off_t loffset, size_t len, off_t * EACCESS - Attempt to write to a read-only range * EBADF, ENOTTY - epd is not a valid endpoint descriptor * ECONNRESET - Connection reset by peer - * EFAULT - Addresses in the range [addr, addr + len - 1] are invalid * EINVAL - rma_flags is invalid * ENODEV - The remote node is lost or existed, but is not currently in the * network since it may have crashed @@ -884,7 +898,6 @@ int scif_vreadfrom(scif_epd_t epd, void *addr, size_t len, off_t roffset, * EACCESS - Attempt to write to a read-only range * EBADF, ENOTTY - epd is not a valid endpoint descriptor * ECONNRESET - Connection reset by peer - * EFAULT - Addresses in the range [addr, addr + len - 1] are invalid * EINVAL - rma_flags is invalid * ENODEV - The remote node is lost or existed, but is not currently in the * network since it may have crashed @@ -1028,11 +1041,212 @@ int scif_fence_signal(scif_epd_t epd, off_t loff, u64 lval, off_t roff, * online nodes in the SCIF network including 'self'; otherwise in user mode * -1 is returned and errno is set to indicate the error; in kernel mode no * errors are returned. + */ +int scif_get_node_ids(u16 *nodes, int len, u16 *self); + +/** + * scif_pin_pages() - Pin a set of pages + * @addr: Virtual address of range to pin + * @len: Length of range to pin + * @prot_flags: Page protection flags + * @map_flags: Page classification flags + * @pinned_pages: Handle to pinned pages + * + * scif_pin_pages() pins (locks in physical memory) the physical pages which + * back the range of virtual address pages starting at addr and continuing for + * len bytes. addr and len are constrained to be multiples of the page size. A + * successful scif_pin_pages() call returns a handle to pinned_pages which may + * be used in subsequent calls to scif_register_pinned_pages(). + * + * The pages will remain pinned as long as there is a reference against the + * scif_pinned_pages_t value returned by scif_pin_pages() and until + * scif_unpin_pages() is called, passing the scif_pinned_pages_t value. A + * reference is added to a scif_pinned_pages_t value each time a window is + * created by calling scif_register_pinned_pages() and passing the + * scif_pinned_pages_t value. A reference is removed from a + * scif_pinned_pages_t value each time such a window is deleted. + * + * Subsequent operations which change the memory pages to which virtual + * addresses are mapped (such as mmap(), munmap()) have no effect on the + * scif_pinned_pages_t value or windows created against it. + * + * If the process will fork(), it is recommended that the registered + * virtual address range be marked with MADV_DONTFORK. Doing so will prevent + * problems due to copy-on-write semantics. + * + * The prot_flags argument is formed by OR'ing together one or more of the + * following values. + * SCIF_PROT_READ - allow read operations against the pages + * SCIF_PROT_WRITE - allow write operations against the pages + * The map_flags argument can be set as SCIF_MAP_KERNEL to interpret addr as a + * kernel space address. By default, addr is interpreted as a user space + * address. + * + * Return: + * Upon successful completion, scif_pin_pages() returns 0; otherwise the + * negative of one of the following errors is returned. * * Errors: - * EFAULT - Bad address + * EINVAL - prot_flags is invalid, map_flags is invalid, or offset is negative + * ENOMEM - Not enough space */ -int scif_get_node_ids(u16 *nodes, int len, u16 *self); +int scif_pin_pages(void *addr, size_t len, int prot_flags, int map_flags, + scif_pinned_pages_t *pinned_pages); + +/** + * scif_unpin_pages() - Unpin a set of pages + * @pinned_pages: Handle to pinned pages to be unpinned + * + * scif_unpin_pages() prevents scif_register_pinned_pages() from registering new + * windows against pinned_pages. The physical pages represented by pinned_pages + * will remain pinned until all windows previously registered against + * pinned_pages are deleted (the window is scif_unregister()'d and all + * references to the window are removed (see scif_unregister()). + * + * pinned_pages must have been obtain from a previous call to scif_pin_pages(). + * After calling scif_unpin_pages(), it is an error to pass pinned_pages to + * scif_register_pinned_pages(). + * + * Return: + * Upon successful completion, scif_unpin_pages() returns 0; otherwise the + * negative of one of the following errors is returned. + * + * Errors: + * EINVAL - pinned_pages is not valid + */ +int scif_unpin_pages(scif_pinned_pages_t pinned_pages); + +/** + * scif_register_pinned_pages() - Mark a memory region for remote access. + * @epd: endpoint descriptor + * @pinned_pages: Handle to pinned pages + * @offset: Registered address space offset + * @map_flags: Flags which control where pages are mapped + * + * The scif_register_pinned_pages() function opens a window, a range of whole + * pages of the registered address space of the endpoint epd, starting at + * offset po. The value of po, further described below, is a function of the + * parameters offset and pinned_pages, and the value of map_flags. Each page of + * the window represents a corresponding physical memory page of the range + * represented by pinned_pages; the length of the window is the same as the + * length of range represented by pinned_pages. A successful + * scif_register_pinned_pages() call returns po as the return value. + * + * When SCIF_MAP_FIXED is set in the map_flags argument, po will be offset + * exactly, and offset is constrained to be a multiple of the page size. The + * mapping established by scif_register_pinned_pages() will not replace any + * existing registration; an error is returned if any page of the new window + * would intersect an existing window. + * + * When SCIF_MAP_FIXED is not set, the implementation uses offset in an + * implementation-defined manner to arrive at po. The po so chosen will be an + * area of the registered address space that the implementation deems suitable + * for a mapping of the required size. An offset value of 0 is interpreted as + * granting the implementation complete freedom in selecting po, subject to + * constraints described below. A non-zero value of offset is taken to be a + * suggestion of an offset near which the mapping should be placed. When the + * implementation selects a value for po, it does not replace any extant + * window. In all cases, po will be a multiple of the page size. + * + * The physical pages which are so represented by a window are available for + * access in calls to scif_get_pages(), scif_readfrom(), scif_writeto(), + * scif_vreadfrom(), and scif_vwriteto(). While a window is registered, the + * physical pages represented by the window will not be reused by the memory + * subsystem for any other purpose. Note that the same physical page may be + * represented by multiple windows. + * + * Windows created by scif_register_pinned_pages() are unregistered by + * scif_unregister(). + * + * The map_flags argument can be set to SCIF_MAP_FIXED which interprets a + * fixed offset. + * + * Return: + * Upon successful completion, scif_register_pinned_pages() returns the offset + * at which the mapping was placed (po); otherwise the negative of one of the + * following errors is returned. + * + * Errors: + * EADDRINUSE - SCIF_MAP_FIXED is set in map_flags and pages in the new window + * would intersect an existing window + * EAGAIN - The mapping could not be performed due to lack of resources + * ECONNRESET - Connection reset by peer + * EINVAL - map_flags is invalid, or SCIF_MAP_FIXED is set in map_flags, and + * offset is not a multiple of the page size, or offset is negative + * ENODEV - The remote node is lost or existed, but is not currently in the + * network since it may have crashed + * ENOMEM - Not enough space + * ENOTCONN - The endpoint is not connected + */ +off_t scif_register_pinned_pages(scif_epd_t epd, + scif_pinned_pages_t pinned_pages, + off_t offset, int map_flags); + +/** + * scif_get_pages() - Add references to remote registered pages + * @epd: endpoint descriptor + * @offset: remote registered offset + * @len: length of range of pages + * @pages: returned scif_range structure + * + * scif_get_pages() returns the addresses of the physical pages represented by + * those pages of the registered address space of the peer of epd, starting at + * offset and continuing for len bytes. offset and len are constrained to be + * multiples of the page size. + * + * All of the pages in the specified range [offset, offset + len - 1] must be + * within a single window of the registered address space of the peer of epd. + * + * The addresses are returned as a virtually contiguous array pointed to by the + * phys_addr component of the scif_range structure whose address is returned in + * pages. The nr_pages component of scif_range is the length of the array. The + * prot_flags component of scif_range holds the protection flag value passed + * when the pages were registered. + * + * Each physical page whose address is returned by scif_get_pages() remains + * available and will not be released for reuse until the scif_range structure + * is returned in a call to scif_put_pages(). The scif_range structure returned + * by scif_get_pages() must be unmodified. + * + * It is an error to call scif_close() on an endpoint on which a scif_range + * structure of that endpoint has not been returned to scif_put_pages(). + * + * Return: + * Upon successful completion, scif_get_pages() returns 0; otherwise the + * negative of one of the following errors is returned. + * Errors: + * ECONNRESET - Connection reset by peer. + * EINVAL - offset is not a multiple of the page size, or offset is negative, or + * len is not a multiple of the page size + * ENODEV - The remote node is lost or existed, but is not currently in the + * network since it may have crashed + * ENOTCONN - The endpoint is not connected + * ENXIO - Offsets in the range [offset, offset + len - 1] are invalid + * for the registered address space of the peer epd + */ +int scif_get_pages(scif_epd_t epd, off_t offset, size_t len, + struct scif_range **pages); + +/** + * scif_put_pages() - Remove references from remote registered pages + * @pages: pages to be returned + * + * scif_put_pages() releases a scif_range structure previously obtained by + * calling scif_get_pages(). The physical pages represented by pages may + * be reused when the window which represented those pages is unregistered. + * Therefore, those pages must not be accessed after calling scif_put_pages(). + * + * Return: + * Upon successful completion, scif_put_pages() returns 0; otherwise the + * negative of one of the following errors is returned. + * Errors: + * EINVAL - pages does not point to a valid scif_range structure, or + * the scif_range structure pointed to by pages was already returned + * ENODEV - The remote node is lost or existed, but is not currently in the + * network since it may have crashed + * ENOTCONN - The endpoint is not connected + */ +int scif_put_pages(struct scif_range *pages); /** * scif_poll() - Wait for some event on an endpoint -- cgit v1.2.3 From 7bd1d4093c2fa37d1ecab05da3c9d48ea2af2264 Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Tue, 22 Sep 2015 15:47:10 +0300 Subject: stm class: Introduce an abstraction for System Trace Module devices A System Trace Module (STM) is a device exporting data in System Trace Protocol (STP) format as defined by MIPI STP standards. Examples of such devices are Intel(R) Trace Hub and Coresight STM. This abstraction provides a unified interface for software trace sources to send their data over an STM device to a debug host. In order to do that, such a trace source needs to be assigned a pair of master/channel identifiers that all the data from this source will be tagged with. The STP decoder on the debug host side will use these master/channel tags to distinguish different trace streams from one another inside one STP stream. This abstraction provides a configfs-based policy management mechanism for dynamic allocation of these master/channel pairs based on trace source-supplied string identifier. It has the flexibility of being defined at runtime and at the same time (provided that the policy definition is aligned with the decoding end) consistency. For userspace trace sources, this abstraction provides write()-based and mmap()-based (if the underlying stm device allows this) output mechanism. For kernel-side trace sources, we provide "stm_source" device class that can be connected to an stm device at run time. Cc: linux-api@vger.kernel.org Reviewed-by: Mathieu Poirier Signed-off-by: Alexander Shishkin Signed-off-by: Greg Kroah-Hartman --- include/linux/stm.h | 126 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 126 insertions(+) create mode 100644 include/linux/stm.h (limited to 'include/linux') diff --git a/include/linux/stm.h b/include/linux/stm.h new file mode 100644 index 000000000000..9d0083d364e6 --- /dev/null +++ b/include/linux/stm.h @@ -0,0 +1,126 @@ +/* + * System Trace Module (STM) infrastructure apis + * Copyright (C) 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef _STM_H_ +#define _STM_H_ + +#include + +/** + * enum stp_packet_type - STP packets that an STM driver sends + */ +enum stp_packet_type { + STP_PACKET_DATA = 0, + STP_PACKET_FLAG, + STP_PACKET_USER, + STP_PACKET_MERR, + STP_PACKET_GERR, + STP_PACKET_TRIG, + STP_PACKET_XSYNC, +}; + +/** + * enum stp_packet_flags - STP packet modifiers + */ +enum stp_packet_flags { + STP_PACKET_MARKED = 0x1, + STP_PACKET_TIMESTAMPED = 0x2, +}; + +struct stp_policy; + +struct stm_device; + +/** + * struct stm_data - STM device description and callbacks + * @name: device name + * @stm: internal structure, only used by stm class code + * @sw_start: first STP master available to software + * @sw_end: last STP master available to software + * @sw_nchannels: number of STP channels per master + * @sw_mmiosz: size of one channel's IO space, for mmap, optional + * @packet: callback that sends an STP packet + * @mmio_addr: mmap callback, optional + * @link: called when a new stm_source gets linked to us, optional + * @unlink: likewise for unlinking, again optional + * @set_options: set device-specific options on a channel + * + * Fill out this structure before calling stm_register_device() to create + * an STM device and stm_unregister_device() to destroy it. It will also be + * passed back to @packet(), @mmio_addr(), @link(), @unlink() and @set_options() + * callbacks. + * + * Normally, an STM device will have a range of masters available to software + * and the rest being statically assigned to various hardware trace sources. + * The former is defined by the the range [@sw_start..@sw_end] of the device + * description. That is, the lowest master that can be allocated to software + * writers is @sw_start and data from this writer will appear is @sw_start + * master in the STP stream. + */ +struct stm_data { + const char *name; + struct stm_device *stm; + unsigned int sw_start; + unsigned int sw_end; + unsigned int sw_nchannels; + unsigned int sw_mmiosz; + ssize_t (*packet)(struct stm_data *, unsigned int, + unsigned int, unsigned int, + unsigned int, unsigned int, + const unsigned char *); + phys_addr_t (*mmio_addr)(struct stm_data *, unsigned int, + unsigned int, unsigned int); + int (*link)(struct stm_data *, unsigned int, + unsigned int); + void (*unlink)(struct stm_data *, unsigned int, + unsigned int); + long (*set_options)(struct stm_data *, unsigned int, + unsigned int, unsigned int, + unsigned long); +}; + +int stm_register_device(struct device *parent, struct stm_data *stm_data, + struct module *owner); +void stm_unregister_device(struct stm_data *stm_data); + +struct stm_source_device; + +/** + * struct stm_source_data - STM source device description and callbacks + * @name: device name, will be used for policy lookup + * @src: internal structure, only used by stm class code + * @nr_chans: number of channels to allocate + * @link: called when this source gets linked to an STM device + * @unlink: called when this source is about to get unlinked from its STM + * + * Fill in this structure before calling stm_source_register_device() to + * register a source device. Also pass it to unregister and write calls. + */ +struct stm_source_data { + const char *name; + struct stm_source_device *src; + unsigned int percpu; + unsigned int nr_chans; + int (*link)(struct stm_source_data *data); + void (*unlink)(struct stm_source_data *data); +}; + +int stm_source_register_device(struct device *parent, + struct stm_source_data *data); +void stm_source_unregister_device(struct stm_source_data *data); + +int stm_source_write(struct stm_source_data *data, unsigned int chan, + const char *buf, size_t count); + +#endif /* _STM_H_ */ -- cgit v1.2.3 From 1d27ff5aba2d36b152542e9d62158eb6584bcbd3 Mon Sep 17 00:00:00 2001 From: Mathieu Poirier Date: Wed, 7 Oct 2015 09:26:39 -0600 Subject: coresight: fixing typographical error Tracing gets enabled _for_ a source rather than _from_ a source. Signed-off-by: Mathieu Poirier Signed-off-by: Greg Kroah-Hartman --- include/linux/coresight.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/coresight.h b/include/linux/coresight.h index c69e1b932809..a7cabfa23b55 100644 --- a/include/linux/coresight.h +++ b/include/linux/coresight.h @@ -207,7 +207,7 @@ struct coresight_ops_link { * Operations available for sources. * @trace_id: returns the value of the component's trace ID as known to the HW. - * @enable: enables tracing from a source. + * @enable: enables tracing for a source. * @disable: disables tracing for a source. */ struct coresight_ops_source { -- cgit v1.2.3 From 6a8c3be7ec8eb3c1197766f9245e0d65a4e5aff8 Mon Sep 17 00:00:00 2001 From: Alan Tull Date: Wed, 7 Oct 2015 16:36:28 +0100 Subject: add FPGA manager core API to support programming FPGA's. The following functions are exported as GPL: * fpga_mgr_buf_load Load fpga from image in buffer * fpga_mgr_firmware_load Request firmware and load it to the FPGA. * fpga_mgr_register * fpga_mgr_unregister FPGA device drivers can be added by calling fpga_mgr_register() to register a set of fpga_manager_ops to do device specific stuff. * of_fpga_mgr_get * fpga_mgr_put Get/put a reference to a fpga manager. The following sysfs files are created: * /sys/class/fpga_manager//name Name of low level driver. * /sys/class/fpga_manager//state State of fpga manager Signed-off-by: Alan Tull Acked-by: Michal Simek Signed-off-by: Greg Kroah-Hartman --- include/linux/fpga/fpga-mgr.h | 127 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 127 insertions(+) create mode 100644 include/linux/fpga/fpga-mgr.h (limited to 'include/linux') diff --git a/include/linux/fpga/fpga-mgr.h b/include/linux/fpga/fpga-mgr.h new file mode 100644 index 000000000000..0940bf45e2f2 --- /dev/null +++ b/include/linux/fpga/fpga-mgr.h @@ -0,0 +1,127 @@ +/* + * FPGA Framework + * + * Copyright (C) 2013-2015 Altera Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ +#include +#include + +#ifndef _LINUX_FPGA_MGR_H +#define _LINUX_FPGA_MGR_H + +struct fpga_manager; + +/** + * enum fpga_mgr_states - fpga framework states + * @FPGA_MGR_STATE_UNKNOWN: can't determine state + * @FPGA_MGR_STATE_POWER_OFF: FPGA power is off + * @FPGA_MGR_STATE_POWER_UP: FPGA reports power is up + * @FPGA_MGR_STATE_RESET: FPGA in reset state + * @FPGA_MGR_STATE_FIRMWARE_REQ: firmware request in progress + * @FPGA_MGR_STATE_FIRMWARE_REQ_ERR: firmware request failed + * @FPGA_MGR_STATE_WRITE_INIT: preparing FPGA for programming + * @FPGA_MGR_STATE_WRITE_INIT_ERR: Error during WRITE_INIT stage + * @FPGA_MGR_STATE_WRITE: writing image to FPGA + * @FPGA_MGR_STATE_WRITE_ERR: Error while writing FPGA + * @FPGA_MGR_STATE_WRITE_COMPLETE: Doing post programming steps + * @FPGA_MGR_STATE_WRITE_COMPLETE_ERR: Error during WRITE_COMPLETE + * @FPGA_MGR_STATE_OPERATING: FPGA is programmed and operating + */ +enum fpga_mgr_states { + /* default FPGA states */ + FPGA_MGR_STATE_UNKNOWN, + FPGA_MGR_STATE_POWER_OFF, + FPGA_MGR_STATE_POWER_UP, + FPGA_MGR_STATE_RESET, + + /* getting an image for loading */ + FPGA_MGR_STATE_FIRMWARE_REQ, + FPGA_MGR_STATE_FIRMWARE_REQ_ERR, + + /* write sequence: init, write, complete */ + FPGA_MGR_STATE_WRITE_INIT, + FPGA_MGR_STATE_WRITE_INIT_ERR, + FPGA_MGR_STATE_WRITE, + FPGA_MGR_STATE_WRITE_ERR, + FPGA_MGR_STATE_WRITE_COMPLETE, + FPGA_MGR_STATE_WRITE_COMPLETE_ERR, + + /* fpga is programmed and operating */ + FPGA_MGR_STATE_OPERATING, +}; + +/* + * FPGA Manager flags + * FPGA_MGR_PARTIAL_RECONFIG: do partial reconfiguration if supported + */ +#define FPGA_MGR_PARTIAL_RECONFIG BIT(0) + +/** + * struct fpga_manager_ops - ops for low level fpga manager drivers + * @state: returns an enum value of the FPGA's state + * @write_init: prepare the FPGA to receive confuration data + * @write: write count bytes of configuration data to the FPGA + * @write_complete: set FPGA to operating state after writing is done + * @fpga_remove: optional: Set FPGA into a specific state during driver remove + * + * fpga_manager_ops are the low level functions implemented by a specific + * fpga manager driver. The optional ones are tested for NULL before being + * called, so leaving them out is fine. + */ +struct fpga_manager_ops { + enum fpga_mgr_states (*state)(struct fpga_manager *mgr); + int (*write_init)(struct fpga_manager *mgr, u32 flags, + const char *buf, size_t count); + int (*write)(struct fpga_manager *mgr, const char *buf, size_t count); + int (*write_complete)(struct fpga_manager *mgr, u32 flags); + void (*fpga_remove)(struct fpga_manager *mgr); +}; + +/** + * struct fpga_manager - fpga manager structure + * @name: name of low level fpga manager + * @dev: fpga manager device + * @ref_mutex: only allows one reference to fpga manager + * @state: state of fpga manager + * @mops: pointer to struct of fpga manager ops + * @priv: low level driver private date + */ +struct fpga_manager { + const char *name; + struct device dev; + struct mutex ref_mutex; + enum fpga_mgr_states state; + const struct fpga_manager_ops *mops; + void *priv; +}; + +#define to_fpga_manager(d) container_of(d, struct fpga_manager, dev) + +int fpga_mgr_buf_load(struct fpga_manager *mgr, u32 flags, + const char *buf, size_t count); + +int fpga_mgr_firmware_load(struct fpga_manager *mgr, u32 flags, + const char *image_name); + +struct fpga_manager *of_fpga_mgr_get(struct device_node *node); + +void fpga_mgr_put(struct fpga_manager *mgr); + +int fpga_mgr_register(struct device *dev, const char *name, + const struct fpga_manager_ops *mops, void *priv); + +void fpga_mgr_unregister(struct device *dev); + +#endif /*_LINUX_FPGA_MGR_H */ -- cgit v1.2.3 From 11eecf910bd81d36425020743b2df73651c5b466 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Sat, 3 Oct 2015 14:15:13 +0900 Subject: extcon: Modify the id and name of external connector This patch modifies the id and name of external connector with the additional prefix to clarify both attribute and meaning of external connector as following: - EXTCON_CHG_* mean the charger connector. - EXTCON_JACK_* mean the jack connector. - EXTCON_DISP_* mean the display port connector. Following table show the new name of external connector with old name: -------------------------------------------------- Old extcon name | New extcon name | -------------------------------------------------- EXTCON_TA | EXTCON_CHG_USB_DCP | EXTCON_CHARGE_DOWNSTREAM| EXTCON_CHG_USB_CDP | EXTCON_FAST_CHARGER | EXTCON_CHG_USB_FAST | EXTCON_SLOW_CHARGER | EXTCON_CHG_USB_SLOW | -------------------------------------------------- EXTCON_MICROPHONE | EXTCON_JACK_MICROPHONE | EXTCON_HEADPHONE | EXTCON_JACK_HEADPHONE | EXTCON_LINE_IN | EXTCON_JACK_LINE_IN | EXTCON_LINE_OUT | EXTCON_JACK_LINE_OUT | EXTCON_VIDEO_IN | EXTCON_JACK_VIDEO_IN | EXTCON_VIDEO_OUT | EXTCON_JACK_VIDEO_OUT | EXTCON_SPDIF_IN | EXTCON_JACK_SPDIF_IN | EXTCON_SPDIF_OUT | EXTCON_JACK_SPDIF_OUT | -------------------------------------------------- EXTCON_HMDI | EXTCON_DISP_HDMI | EXTCON_MHL | EXTCON_DISP_MHL | EXTCON_DVI | EXTCON_DISP_DVI | EXTCON_VGA | EXTCON_DISP_VGA | -------------------------------------------------- And, when altering the name of USB charger connector, EXTCON refers to the "Battery Charging v1.2 Spec and Adopters Agreement"[1] to use the standard name of USB charging port as following. Following name of USB charging port are already used in power_supply subsystem. We chan check it on patch[2]. - EXTCON_CHG_USB_SDP /* Standard Downstream Port */ - EXTCON_CHG_USB_DCP /* Dedicated Charging Port */ - EXTCON_CHG_USB_CDP /* Charging Downstream Port */ - EXTCON_CHG_USB_ACA /* Accessory Charger Adapter */ [1] www.usb.org/developers/docs/devclass_docs/BCv1.2_070312.zip [2] commit 85efc8a18ced ("power_supply: Add types for USB chargers") Signed-off-by: Chanwoo Choi [ckeepax: For the Arizona changes] Acked-by: Charles Keepax Reviewed-by: Roger Quadros --- include/linux/extcon.h | 62 +++++++++++++++++++++++++++++--------------------- 1 file changed, 36 insertions(+), 26 deletions(-) (limited to 'include/linux') diff --git a/include/linux/extcon.h b/include/linux/extcon.h index c0f8c4fc5d45..7abf674c388c 100644 --- a/include/linux/extcon.h +++ b/include/linux/extcon.h @@ -31,32 +31,42 @@ /* * Define the unique id of supported external connectors */ -#define EXTCON_NONE 0 - -#define EXTCON_USB 1 /* USB connector */ -#define EXTCON_USB_HOST 2 - -#define EXTCON_TA 3 /* Charger connector */ -#define EXTCON_FAST_CHARGER 4 -#define EXTCON_SLOW_CHARGER 5 -#define EXTCON_CHARGE_DOWNSTREAM 6 - -#define EXTCON_LINE_IN 7 /* Audio/Video connector */ -#define EXTCON_LINE_OUT 8 -#define EXTCON_MICROPHONE 9 -#define EXTCON_HEADPHONE 10 -#define EXTCON_HDMI 11 -#define EXTCON_MHL 12 -#define EXTCON_DVI 13 -#define EXTCON_VGA 14 -#define EXTCON_SPDIF_IN 15 -#define EXTCON_SPDIF_OUT 16 -#define EXTCON_VIDEO_IN 17 -#define EXTCON_VIDEO_OUT 18 - -#define EXTCON_DOCK 19 /* Misc connector */ -#define EXTCON_JIG 20 -#define EXTCON_MECHANICAL 21 +#define EXTCON_NONE 0 + +/* USB external connector */ +#define EXTCON_USB 1 +#define EXTCON_USB_HOST 2 + +/* Charging external connector */ +#define EXTCON_CHG_USB_SDP 5 /* Standard Downstream Port */ +#define EXTCON_CHG_USB_DCP 6 /* Dedicated Charging Port */ +#define EXTCON_CHG_USB_CDP 7 /* Charging Downstream Port */ +#define EXTCON_CHG_USB_ACA 8 /* Accessory Charger Adapter */ +#define EXTCON_CHG_USB_FAST 9 +#define EXTCON_CHG_USB_SLOW 10 + +/* Jack external connector */ +#define EXTCON_JACK_MICROPHONE 20 +#define EXTCON_JACK_HEADPHONE 21 +#define EXTCON_JACK_LINE_IN 22 +#define EXTCON_JACK_LINE_OUT 23 +#define EXTCON_JACK_VIDEO_IN 24 +#define EXTCON_JACK_VIDEO_OUT 25 +#define EXTCON_JACK_SPDIF_IN 26 /* Sony Philips Digital InterFace */ +#define EXTCON_JACK_SPDIF_OUT 27 + +/* Display external connector */ +#define EXTCON_DISP_HDMI 40 /* High-Definition Multimedia Interface */ +#define EXTCON_DISP_MHL 41 /* Mobile High-Definition Link */ +#define EXTCON_DISP_DVI 42 /* Digital Visual Interface */ +#define EXTCON_DISP_VGA 43 /* Video Graphics Array */ + +/* Miscellaneous external connector */ +#define EXTCON_DOCK 60 +#define EXTCON_JIG 61 +#define EXTCON_MECHANICAL 62 + +#define EXTCON_NUM 63 struct extcon_cable; -- cgit v1.2.3 From 52d63671c15bd3dfcd72f4ea324b338d1309db97 Mon Sep 17 00:00:00 2001 From: Gabriel Laskar Date: Tue, 6 Oct 2015 16:27:36 +0200 Subject: msm: remove unused header Signed-off-by: Gabriel Laskar Acked-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- include/linux/msm_mdp.h | 79 ------------------------------------------------- 1 file changed, 79 deletions(-) delete mode 100644 include/linux/msm_mdp.h (limited to 'include/linux') diff --git a/include/linux/msm_mdp.h b/include/linux/msm_mdp.h deleted file mode 100644 index fe722c1fb61d..000000000000 --- a/include/linux/msm_mdp.h +++ /dev/null @@ -1,79 +0,0 @@ -/* include/linux/msm_mdp.h - * - * Copyright (C) 2007 Google Incorporated - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef _MSM_MDP_H_ -#define _MSM_MDP_H_ - -#include - -#define MSMFB_IOCTL_MAGIC 'm' -#define MSMFB_GRP_DISP _IOW(MSMFB_IOCTL_MAGIC, 1, unsigned int) -#define MSMFB_BLIT _IOW(MSMFB_IOCTL_MAGIC, 2, unsigned int) - -enum { - MDP_RGB_565, /* RGB 565 planar */ - MDP_XRGB_8888, /* RGB 888 padded */ - MDP_Y_CBCR_H2V2, /* Y and CbCr, pseudo planar w/ Cb is in MSB */ - MDP_ARGB_8888, /* ARGB 888 */ - MDP_RGB_888, /* RGB 888 planar */ - MDP_Y_CRCB_H2V2, /* Y and CrCb, pseudo planar w/ Cr is in MSB */ - MDP_YCRYCB_H2V1, /* YCrYCb interleave */ - MDP_Y_CRCB_H2V1, /* Y and CrCb, pseduo planar w/ Cr is in MSB */ - MDP_Y_CBCR_H2V1, /* Y and CrCb, pseduo planar w/ Cr is in MSB */ - MDP_RGBA_8888, /* ARGB 888 */ - MDP_BGRA_8888, /* ABGR 888 */ - MDP_RGBX_8888, /* RGBX 888 */ - MDP_IMGTYPE_LIMIT /* Non valid image type after this enum */ -}; - -enum { - PMEM_IMG, - FB_IMG, -}; - -/* flag values */ -#define MDP_ROT_NOP 0 -#define MDP_FLIP_LR 0x1 -#define MDP_FLIP_UD 0x2 -#define MDP_ROT_90 0x4 -#define MDP_ROT_180 (MDP_FLIP_UD|MDP_FLIP_LR) -#define MDP_ROT_270 (MDP_ROT_90|MDP_FLIP_UD|MDP_FLIP_LR) -#define MDP_DITHER 0x8 -#define MDP_BLUR 0x10 - -#define MDP_TRANSP_NOP 0xffffffff -#define MDP_ALPHA_NOP 0xff - -struct mdp_rect { - u32 x, y, w, h; -}; - -struct mdp_img { - u32 width, height, format, offset; - int memory_id; /* the file descriptor */ -}; - -struct mdp_blit_req { - struct mdp_img src; - struct mdp_img dst; - struct mdp_rect src_rect; - struct mdp_rect dst_rect; - u32 alpha, transp_mask, flags; -}; - -struct mdp_blit_req_list { - u32 count; - struct mdp_blit_req req[]; -}; - -#endif /* _MSM_MDP_H_ */ -- cgit v1.2.3 From ad1bfe410e91189522514ea784668dc75a4e64c4 Mon Sep 17 00:00:00 2001 From: Dmitry Kalinkin Date: Sun, 11 Oct 2015 01:00:58 +0300 Subject: vme: 8-bit status/id takes 256 values, not 255 Fixes an off by one array size. Signed-off-by: Dmitry Kalinkin Signed-off-by: Greg Kroah-Hartman --- include/linux/vme.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/vme.h b/include/linux/vme.h index c0131358f351..71e4a6dec5ac 100644 --- a/include/linux/vme.h +++ b/include/linux/vme.h @@ -81,6 +81,9 @@ struct vme_resource { extern struct bus_type vme_bus_type; +/* Number of VME interrupt vectors */ +#define VME_NUM_STATUSID 256 + /* VME_MAX_BRIDGES comes from the type of vme_bus_numbers */ #define VME_MAX_BRIDGES (sizeof(unsigned int)*8) #define VME_MAX_SLOTS 32 -- cgit v1.2.3