From 074d46d1d23f27488a3f314e29cae2453541f17d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 15 Mar 2012 19:45:16 +0100 Subject: wireless: rename ht_info to ht_operation Since some of the HT code pre-dates 802.11n-2009 some names are wrong. The one that bothers me most is that "HT operation" is called "HT information" in our code and that causes confusion. Rename "HT information" to "HT operation" and also the control_chan field to primary_chan to match the name used in the spec. Signed-off-by: Johannes Berg Acked-by: Bing Zhao Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 210e2c325534..a8c1c46431ab 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1007,13 +1007,13 @@ enum ieee80211_min_mpdu_spacing { }; /** - * struct ieee80211_ht_info - HT information + * struct ieee80211_ht_operation - HT operation IE * - * This structure is the "HT information element" as - * described in 802.11n D5.0 7.3.2.58 + * This structure is the "HT operation element" as + * described in 802.11n-2009 7.3.2.57 */ -struct ieee80211_ht_info { - u8 control_chan; +struct ieee80211_ht_operation { + u8 primary_chan; u8 ht_param; __le16 operation_mode; __le16 stbc_param; @@ -1027,8 +1027,6 @@ struct ieee80211_ht_info { #define IEEE80211_HT_PARAM_CHA_SEC_BELOW 0x03 #define IEEE80211_HT_PARAM_CHAN_WIDTH_ANY 0x04 #define IEEE80211_HT_PARAM_RIFS_MODE 0x08 -#define IEEE80211_HT_PARAM_SPSMP_SUPPORT 0x10 -#define IEEE80211_HT_PARAM_SERV_INTERVAL_GRAN 0xE0 /* for operation_mode */ #define IEEE80211_HT_OP_MODE_PROTECTION 0x0003 @@ -1301,7 +1299,7 @@ enum ieee80211_eid { WLAN_EID_EXT_SUPP_RATES = 50, WLAN_EID_HT_CAPABILITY = 45, - WLAN_EID_HT_INFORMATION = 61, + WLAN_EID_HT_OPERATION = 61, WLAN_EID_RSN = 48, WLAN_EID_MMIE = 76, -- cgit v1.2.3 From 292c41acddfdbe0fb42d4c4ad9b896168fd16e91 Mon Sep 17 00:00:00 2001 From: Chun-Yeow Yeoh Date: Mon, 19 Mar 2012 21:38:46 +0800 Subject: mac80211: fix the sparse warnings on endian handling in RANN propagation The HWMP sequence number of received RANN element is compared to decide whether to be propagated. The sequence number is required to covert from 32bit little endian data into CPUs endianness for comparison. The same applies to the RANN metric. Signed-off-by: Chun-Yeow Yeoh Signed-off-by: Javier Cardona Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index a8c1c46431ab..09301b0768d0 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -640,9 +640,9 @@ struct ieee80211_rann_ie { u8 rann_hopcount; u8 rann_ttl; u8 rann_addr[6]; - u32 rann_seq; - u32 rann_interval; - u32 rann_metric; + __le32 rann_seq; + __le32 rann_interval; + __le32 rann_metric; } __attribute__ ((packed)); enum ieee80211_rann_flags { -- cgit v1.2.3 From a3304b0a17495183a2270d4a25978795226597a4 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 28 Mar 2012 11:04:24 +0200 Subject: cfg80211/nl80211: clarify TX queue API With the plan to change mac80211's queue API to not map ACs to queues 1:1, it seems necessary to clarify some APIs that act on ACs rather than on queues to spell that out explicitly. Do this. Also verify that the AC number given is valid. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index e474f6e780cc..1f6e44680fb7 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -2223,7 +2223,7 @@ enum nl80211_mesh_setup_params { /** * enum nl80211_txq_attr - TX queue parameter attributes * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved - * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*) + * @NL80211_TXQ_ATTR_AC: AC identifier (NL80211_AC_*) * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning * disabled * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form @@ -2236,7 +2236,7 @@ enum nl80211_mesh_setup_params { */ enum nl80211_txq_attr { __NL80211_TXQ_ATTR_INVALID, - NL80211_TXQ_ATTR_QUEUE, + NL80211_TXQ_ATTR_AC, NL80211_TXQ_ATTR_TXOP, NL80211_TXQ_ATTR_CWMIN, NL80211_TXQ_ATTR_CWMAX, @@ -2247,13 +2247,21 @@ enum nl80211_txq_attr { NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1 }; -enum nl80211_txq_q { - NL80211_TXQ_Q_VO, - NL80211_TXQ_Q_VI, - NL80211_TXQ_Q_BE, - NL80211_TXQ_Q_BK +enum nl80211_ac { + NL80211_AC_VO, + NL80211_AC_VI, + NL80211_AC_BE, + NL80211_AC_BK, + NL80211_NUM_ACS }; +/* backward compat */ +#define NL80211_TXQ_ATTR_QUEUE NL80211_TXQ_ATTR_AC +#define NL80211_TXQ_Q_VO NL80211_AC_VO +#define NL80211_TXQ_Q_VI NL80211_AC_VI +#define NL80211_TXQ_Q_BE NL80211_AC_BE +#define NL80211_TXQ_Q_BK NL80211_AC_BK + enum nl80211_channel_type { NL80211_CHAN_NO_HT, NL80211_CHAN_HT20, -- cgit v1.2.3 From dbf498fbafa2c23139d5a990e94ed78bafbbea19 Mon Sep 17 00:00:00 2001 From: Javier Cardona Date: Sat, 31 Mar 2012 11:31:32 -0700 Subject: mac80211: Implement mesh synchronization framework This patch adds MBSS extensible synchronization framework (Sec. 13.13.2 of IEEE Std. 802.11-2012). The framework is implemented via an ops table which defines the following functions: rx_bcn_presp() - this is called every time a mesh beacon is received. adjust_tbtt() - this is called immediately before a beacon is about to be transmitted. The default neighbor offset synchronization defined in the standard is implemented. We also provide template functions for vendor specific methods. When neighbor offset synchronization is active (which is the default) mesh neighbors in the same MBSS will track timing offsets to each other and compensate clock drift. In our tests we observed that this mesh synchronization implementation successfully corrected drifts between stations of ~2PPM while introducing a jitter of ~20us. It is also possible to test this framework on mac80211_hwsim simulated phys to see how it behaves under different topologies, over poor links, etc. Signed-off-by: Marco Porsch Signed-off-by: Pavel Zubarev Signed-off-by: Javier Cardona Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 09301b0768d0..db84e2f6b289 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1438,6 +1438,18 @@ enum ieee80211_tdls_actioncode { /* TDLS specific payload type in the LLC/SNAP header */ #define WLAN_TDLS_SNAP_RFTYPE 0x2 +/** + * enum - mesh synchronization method identifier + * + * @IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET: the default synchronization method + * @IEEE80211_SYNC_METHOD_VENDOR: a vendor specific synchronization method + * that will be specified in a vendor specific information element + */ +enum { + IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET = 1, + IEEE80211_SYNC_METHOD_VENDOR = 255, +}; + /** * enum - mesh path selection protocol identifier * -- cgit v1.2.3 From d299a1f21ea7ffd5114d099b2f92c867c495e8b3 Mon Sep 17 00:00:00 2001 From: Javier Cardona Date: Sat, 31 Mar 2012 11:31:33 -0700 Subject: {nl,cfg}80211: Support for mesh synchronization Report Toffset to userspace. Let userspace select the mesh synchronization method. Signed-off-by: Marco Porsch Signed-off-by: Pavel Zubarev Signed-off-by: Javier Cardona Signed-off-by: John W. Linville --- include/linux/nl80211.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 1f6e44680fb7..c6d26328a166 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -1685,6 +1685,7 @@ enum nl80211_sta_bss_param { * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update. * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32) + * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64) * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ @@ -1708,6 +1709,7 @@ enum nl80211_sta_info { NL80211_STA_INFO_CONNECTED_TIME, NL80211_STA_INFO_STA_FLAGS, NL80211_STA_INFO_BEACON_LOSS, + NL80211_STA_INFO_T_OFFSET, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, @@ -2142,6 +2144,9 @@ enum nl80211_mntr_flags { * * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute * + * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors + * to synchronize to for 11s default synchronization method (see 11C.12.2.2) + * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use */ enum nl80211_meshconf_params { @@ -2166,6 +2171,7 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL, NL80211_MESHCONF_FORWARDING, NL80211_MESHCONF_RSSI_THRESHOLD, + NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, @@ -2205,6 +2211,11 @@ enum nl80211_meshconf_params { * complete (unsecured) mesh peering without the need of a userspace daemon. * * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number + * + * @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a + * vendor specific synchronization method or disable it to use the default + * neighbor offset synchronization + * * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use */ enum nl80211_mesh_setup_params { @@ -2214,6 +2225,7 @@ enum nl80211_mesh_setup_params { NL80211_MESH_SETUP_IE, NL80211_MESH_SETUP_USERSPACE_AUTH, NL80211_MESH_SETUP_USERSPACE_AMPE, + NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC, /* keep last */ __NL80211_MESH_SETUP_ATTR_AFTER_LAST, -- cgit v1.2.3 From 5314526b1743e8e8614293db7d86e480b4fe9824 Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Fri, 6 Apr 2012 13:35:47 -0700 Subject: cfg80211: add channel switch notify event The firmware may decide to switch channels while already beaconing, e.g. in response to a cfg80211 connect request on a different vif. Add this event to notify userspace when an AP or GO interface has successfully migrated to a new channel, so it can update its configuration accordingly. Signed-off-by: Thomas Pedersen Signed-off-by: John W. Linville --- include/linux/nl80211.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index c6d26328a166..1335084b1c69 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -548,6 +548,11 @@ * @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether * No Acknowledgement Policy should be applied. * + * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels + * independently of the userspace SME, send this event indicating + * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ with + * %NL80211_ATTR_WIPHY_CHANNEL_TYPE. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -689,6 +694,8 @@ enum nl80211_commands { NL80211_CMD_SET_NOACK_MAP, + NL80211_CMD_CH_SWITCH_NOTIFY, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ -- cgit v1.2.3