From ba350fbc53b5798104b3fc245bb3c3461a4ef8dc Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Mon, 5 Nov 2012 15:29:09 +0100 Subject: wireless: add peer-to-peer related definitions The Peer-to-Peer IE is vendor-specific IE identified by WiFi Alliance OUI and specific P2P OUI type. The payload of this IE consists of so-called P2P attributes. This patch adds definitions for processing these attributes. Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Franky (Zhenhui) Lin Signed-off-by: Arend van Spriel Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 85764a900731..4530d4960953 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -905,6 +905,38 @@ struct ieee80211_tdls_data { } u; } __packed; +/* + * Peer-to-Peer IE attribute related definitions. + */ +/** + * enum ieee80211_p2p_attr_id - identifies type of peer-to-peer attribute. + */ +enum ieee80211_p2p_attr_id { + IEEE80211_P2P_ATTR_STATUS = 0, + IEEE80211_P2P_ATTR_MINOR_REASON, + IEEE80211_P2P_ATTR_CAPABILITY, + IEEE80211_P2P_ATTR_DEVICE_ID, + IEEE80211_P2P_ATTR_GO_INTENT, + IEEE80211_P2P_ATTR_GO_CONFIG_TIMEOUT, + IEEE80211_P2P_ATTR_LISTEN_CHANNEL, + IEEE80211_P2P_ATTR_GROUP_BSSID, + IEEE80211_P2P_ATTR_EXT_LISTEN_TIMING, + IEEE80211_P2P_ATTR_INTENDED_IFACE_ADDR, + IEEE80211_P2P_ATTR_MANAGABILITY, + IEEE80211_P2P_ATTR_CHANNEL_LIST, + IEEE80211_P2P_ATTR_ABSENCE_NOTICE, + IEEE80211_P2P_ATTR_DEVICE_INFO, + IEEE80211_P2P_ATTR_GROUP_INFO, + IEEE80211_P2P_ATTR_GROUP_ID, + IEEE80211_P2P_ATTR_INTERFACE, + IEEE80211_P2P_ATTR_OPER_CHANNEL, + IEEE80211_P2P_ATTR_INVITE_FLAGS, + /* 19 - 220: Reserved */ + IEEE80211_P2P_ATTR_VENDOR_SPECIFIC = 221, + + IEEE80211_P2P_ATTR_MAX +}; + /** * struct ieee80211_bar - HT Block Ack Request * -- cgit v1.2.3 From 7583fe778f77cbeb37f54ff5b9afd96119fcab43 Mon Sep 17 00:00:00 2001 From: Piotr Haber Date: Thu, 8 Nov 2012 09:47:27 +0100 Subject: ssb: fix SPROM offset Offset for temperature compensation values is wrong in ssb SPROMv8 map. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Arend van Spriel Signed-off-by: Piotr Haber Signed-off-by: John W. Linville --- include/linux/ssb/ssb_regs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h index a0525019e1d1..6ecfa02ddbac 100644 --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -485,7 +485,7 @@ #define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT 4 #define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL 0x0020 #define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT 5 -#define SSB_SPROM8_TEMPDELTA 0x00BA +#define SSB_SPROM8_TEMPDELTA 0x00BC #define SSB_SPROM8_TEMPDELTA_PHYCAL 0x00ff #define SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT 0 #define SSB_SPROM8_TEMPDELTA_PERIOD 0x0f00 -- cgit v1.2.3 From 5a306f5887d5fd840beb8ea872897fa89e8fcdef Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 14 Nov 2012 23:22:21 +0100 Subject: mac80211: introduce IEEE80211_NUM_TIDS and use it Introduce IEEE80211_NUM_TIDS in the generic 802.11 header file and use it in place of STA_TID_NUM and NUM_RX_DATA_QUEUES which are both really the number of TIDs. Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 4530d4960953..d68790903b9e 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -131,6 +131,8 @@ #define IEEE80211_MAX_MESH_ID_LEN 32 +#define IEEE80211_NUM_TIDS 16 + #define IEEE80211_QOS_CTL_LEN 2 /* 1d tag mask */ #define IEEE80211_QOS_CTL_TAG1D_MASK 0x0007 -- cgit v1.2.3 From d962ec4922493da48bb0fd33b26200de039b0d75 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Wed, 24 Oct 2012 11:45:12 -0700 Subject: NFC: Remove unused details from pn544.h header file The majority of the defines and structures from pn544.h are no longer in use. So just remove them. Signed-off-by: Marcel Holtmann Signed-off-by: Samuel Ortiz --- include/linux/nfc/pn544.h | 60 ----------------------------------------------- 1 file changed, 60 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nfc/pn544.h b/include/linux/nfc/pn544.h index 9890bbaf4328..713bfd703342 100644 --- a/include/linux/nfc/pn544.h +++ b/include/linux/nfc/pn544.h @@ -25,65 +25,6 @@ #include -#define PN544_DRIVER_NAME "pn544" -#define PN544_MAXWINDOW_SIZE 7 -#define PN544_WINDOW_SIZE 4 -#define PN544_RETRIES 10 -#define PN544_MAX_I2C_TRANSFER 0x0400 -#define PN544_MSG_MAX_SIZE 0x21 /* at normal HCI mode */ - -/* ioctl */ -#define PN544_CHAR_BASE 'P' -#define PN544_IOR(num, dtype) _IOR(PN544_CHAR_BASE, num, dtype) -#define PN544_IOW(num, dtype) _IOW(PN544_CHAR_BASE, num, dtype) -#define PN544_GET_FW_MODE PN544_IOW(1, unsigned int) -#define PN544_SET_FW_MODE PN544_IOW(2, unsigned int) -#define PN544_GET_DEBUG PN544_IOW(3, unsigned int) -#define PN544_SET_DEBUG PN544_IOW(4, unsigned int) - -/* Timing restrictions (ms) */ -#define PN544_RESETVEN_TIME 30 /* 7 */ -#define PN544_PVDDVEN_TIME 0 -#define PN544_VBATVEN_TIME 0 -#define PN544_GPIO4VEN_TIME 0 -#define PN544_WAKEUP_ACK 5 -#define PN544_WAKEUP_GUARD (PN544_WAKEUP_ACK + 1) -#define PN544_INACTIVITY_TIME 1000 -#define PN544_INTERFRAME_DELAY 200 /* us */ -#define PN544_BAUDRATE_CHANGE 150 /* us */ - -/* Debug bits */ -#define PN544_DEBUG_BUF 0x01 -#define PN544_DEBUG_READ 0x02 -#define PN544_DEBUG_WRITE 0x04 -#define PN544_DEBUG_IRQ 0x08 -#define PN544_DEBUG_CALLS 0x10 -#define PN544_DEBUG_MODE 0x20 - -/* Normal (HCI) mode */ -#define PN544_LLC_HCI_OVERHEAD 3 /* header + crc (to length) */ -#define PN544_LLC_MIN_SIZE (1 + PN544_LLC_HCI_OVERHEAD) /* length + */ -#define PN544_LLC_MAX_DATA (PN544_MSG_MAX_SIZE - 2) -#define PN544_LLC_MAX_HCI_SIZE (PN544_LLC_MAX_DATA - 2) - -struct pn544_llc_packet { - unsigned char length; /* of rest of packet */ - unsigned char header; - unsigned char data[PN544_LLC_MAX_DATA]; /* includes crc-ccitt */ -}; - -/* Firmware upgrade mode */ -#define PN544_FW_HEADER_SIZE 3 -/* max fw transfer is 1024bytes, but I2C limits it to 0xC0 */ -#define PN544_MAX_FW_DATA (PN544_MAX_I2C_TRANSFER - PN544_FW_HEADER_SIZE) - -struct pn544_fw_packet { - unsigned char command; /* status in answer */ - unsigned char length[2]; /* big-endian order (msf) */ - unsigned char data[PN544_MAX_FW_DATA]; -}; - -#ifdef __KERNEL__ enum { NFC_GPIO_ENABLE, NFC_GPIO_FW_RESET, @@ -99,6 +40,5 @@ struct pn544_nfc_platform_data { void (*disable) (void); int (*get_gpio)(int type); }; -#endif /* __KERNEL__ */ #endif /* _PN544_H_ */ -- cgit v1.2.3 From 61cdb01853c99e78d8b54db1b77e524c0dce585d Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Wed, 24 Oct 2012 11:45:26 -0700 Subject: NFC: Move pn544.h to linux/platform_data/ The pn544.h just provides the platform data struct and defines and nothing else. So move it to to linux/platform_data/ now. Signed-off-by: Marcel Holtmann Signed-off-by: Samuel Ortiz --- include/linux/nfc/pn544.h | 44 ------------------------------------- include/linux/platform_data/pn544.h | 44 +++++++++++++++++++++++++++++++++++++ 2 files changed, 44 insertions(+), 44 deletions(-) delete mode 100644 include/linux/nfc/pn544.h create mode 100644 include/linux/platform_data/pn544.h (limited to 'include/linux') diff --git a/include/linux/nfc/pn544.h b/include/linux/nfc/pn544.h deleted file mode 100644 index 713bfd703342..000000000000 --- a/include/linux/nfc/pn544.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Driver include for the PN544 NFC chip. - * - * Copyright (C) Nokia Corporation - * - * Author: Jari Vanhala - * Contact: Matti Aaltoenn - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _PN544_H_ -#define _PN544_H_ - -#include - -enum { - NFC_GPIO_ENABLE, - NFC_GPIO_FW_RESET, - NFC_GPIO_IRQ -}; - -/* board config */ -struct pn544_nfc_platform_data { - int (*request_resources) (struct i2c_client *client); - void (*free_resources) (void); - void (*enable) (int fw); - int (*test) (void); - void (*disable) (void); - int (*get_gpio)(int type); -}; - -#endif /* _PN544_H_ */ diff --git a/include/linux/platform_data/pn544.h b/include/linux/platform_data/pn544.h new file mode 100644 index 000000000000..713bfd703342 --- /dev/null +++ b/include/linux/platform_data/pn544.h @@ -0,0 +1,44 @@ +/* + * Driver include for the PN544 NFC chip. + * + * Copyright (C) Nokia Corporation + * + * Author: Jari Vanhala + * Contact: Matti Aaltoenn + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _PN544_H_ +#define _PN544_H_ + +#include + +enum { + NFC_GPIO_ENABLE, + NFC_GPIO_FW_RESET, + NFC_GPIO_IRQ +}; + +/* board config */ +struct pn544_nfc_platform_data { + int (*request_resources) (struct i2c_client *client); + void (*free_resources) (void); + void (*enable) (int fw); + int (*test) (void); + void (*disable) (void); + int (*get_gpio)(int type); +}; + +#endif /* _PN544_H_ */ -- cgit v1.2.3 From 65821635d26d3173a3b22781e2c60d5e6fcaeb22 Mon Sep 17 00:00:00 2001 From: Marco Porsch Date: Wed, 21 Nov 2012 18:40:30 -0800 Subject: mac80211: move Mesh Capability field definition to ieee80211.h Signed-off-by: Marco Porsch [prefix with IEEE80211_] Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index d68790903b9e..65c6b0f3ef60 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -667,6 +667,21 @@ struct ieee80211_meshconf_ie { u8 meshconf_cap; } __attribute__ ((packed)); +/** + * enum mesh_config_capab_flags - Mesh Configuration IE capability field flags + * + * @IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS: STA is willing to establish + * additional mesh peerings with other mesh STAs + * @IEEE80211_MESHCONF_CAPAB_FORWARDING: the STA forwards MSDUs + * @IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING: TBTT adjustment procedure + * is ongoing + */ +enum mesh_config_capab_flags { + IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS = 0x01, + IEEE80211_MESHCONF_CAPAB_FORWARDING = 0x08, + IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING = 0x20, +}; + /** * struct ieee80211_rann_ie * -- cgit v1.2.3 From 7173a1fa53dff94f771a66b93623500424376015 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 12 Nov 2012 11:44:18 +0100 Subject: wireless: add definitions for VHT MCS support Add definitions for the VHT MCS support values that are used to indicate, for each number of streams (1 through 8) which MCSes are supported. Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 65c6b0f3ef60..f9c5a787d350 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1163,11 +1163,13 @@ struct ieee80211_ht_operation { * STA can receive. Rate expressed in units of 1 Mbps. * If this field is 0 this value should not be used to * consider the highest RX data rate supported. + * The top 3 bits of this field are reserved. * @tx_mcs_map: TX MCS map 2 bits for each stream, total 8 streams * @tx_highest: Indicates highest long GI VHT PPDU data rate * STA can transmit. Rate expressed in units of 1 Mbps. * If this field is 0 this value should not be used to * consider the highest TX data rate supported. + * The top 3 bits of this field are reserved. */ struct ieee80211_vht_mcs_info { __le16 rx_mcs_map; @@ -1176,6 +1178,27 @@ struct ieee80211_vht_mcs_info { __le16 tx_highest; } __packed; +/** + * enum ieee80211_vht_mcs_support - VHT MCS support definitions + * @IEEE80211_VHT_MCS_SUPPORT_0_7: MCSes 0-7 are supported for the + * number of streams + * @IEEE80211_VHT_MCS_SUPPORT_0_8: MCSes 0-8 are supported + * @IEEE80211_VHT_MCS_SUPPORT_0_9: MCSes 0-9 are supported + * @IEEE80211_VHT_MCS_NOT_SUPPORTED: This number of streams isn't supported + * + * These definitions are used in each 2-bit subfield of the @rx_mcs_map + * and @tx_mcs_map fields of &struct ieee80211_vht_mcs_info, which are + * both split into 8 subfields by number of streams. These values indicate + * which MCSes are supported for the number of streams the value appears + * for. + */ +enum ieee80211_vht_mcs_support { + IEEE80211_VHT_MCS_SUPPORT_0_7 = 0, + IEEE80211_VHT_MCS_SUPPORT_0_8 = 1, + IEEE80211_VHT_MCS_SUPPORT_0_9 = 2, + IEEE80211_VHT_MCS_NOT_SUPPORTED = 3, +}; + /** * struct ieee80211_vht_cap - VHT capabilities * -- cgit v1.2.3 From 0751f8654602e4255f0b9c17784d8100d5896010 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 24 Nov 2012 19:34:17 +0100 Subject: bcma: add more package IDs Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- include/linux/bcma/bcma.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index fd15d9829705..93b1e091b1e9 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -157,6 +157,7 @@ struct bcma_host_ops { /* Chip IDs of SoCs */ #define BCMA_CHIP_ID_BCM4706 0x5300 +#define BCMA_PKG_ID_BCM4706L 1 #define BCMA_CHIP_ID_BCM4716 0x4716 #define BCMA_PKG_ID_BCM4716 8 #define BCMA_PKG_ID_BCM4717 9 @@ -166,7 +167,11 @@ struct bcma_host_ops { #define BCMA_CHIP_ID_BCM4749 0x4749 #define BCMA_CHIP_ID_BCM5356 0x5356 #define BCMA_CHIP_ID_BCM5357 0x5357 +#define BCMA_PKG_ID_BCM5358 9 +#define BCMA_PKG_ID_BCM47186 10 +#define BCMA_PKG_ID_BCM5357 11 #define BCMA_CHIP_ID_BCM53572 53572 +#define BCMA_PKG_ID_BCM47188 9 struct bcma_device { struct bcma_bus *bus; -- cgit v1.2.3