From 0ad7c00057dc1640647c1dc81ccbd009de17a767 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Tue, 26 Nov 2013 10:04:22 -0700 Subject: dma: add channel request API that supports deferred probe dma_request_slave_channel() simply returns NULL whenever DMA channel lookup fails. Lookup could fail for two distinct reasons: a) No DMA specification exists for the channel name. This includes situations where no DMA specifications exist at all, or other general lookup problems. b) A DMA specification does exist, yet the driver for that channel is not yet registered. Case (b) should trigger deferred probe in client drivers. However, since they have no way to differentiate the two situations, it cannot. Implement new function dma_request_slave_channel_reason(), which performs identically to dma_request_slave_channel(), except that it returns an error-pointer rather than NULL, which allows callers to detect when deferred probe should occur. Eventually, all drivers should be converted to this new API, the old API removed, and the new API renamed to the more desirable name. This patch doesn't convert the existing API and all drivers in one go, since some drivers call dma_request_slave_channel() then dma_request_channel() if that fails. That would require either modifying dma_request_channel() in the same way, or adding extra error-handling code to all affected drivers, and there are close to 100 drivers using the other API, rather than just the 15-20 or so that use dma_request_slave_channel(), which might be tenable in a single patch. acpi_dma_request_slave_chan_by_name() doesn't currently implement deferred probe. It should, but this will be addressed later. Acked-by: Dan Williams Signed-off-by: Stephen Warren Signed-off-by: Vinod Koul --- include/linux/dmaengine.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 41cf0c399288..ed92b30a02fd 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -22,6 +22,7 @@ #define LINUX_DMAENGINE_H #include +#include #include #include #include @@ -1040,6 +1041,8 @@ enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx); void dma_issue_pending_all(void); struct dma_chan *__dma_request_channel(const dma_cap_mask_t *mask, dma_filter_fn fn, void *fn_param); +struct dma_chan *dma_request_slave_channel_reason(struct device *dev, + const char *name); struct dma_chan *dma_request_slave_channel(struct device *dev, const char *name); void dma_release_channel(struct dma_chan *chan); #else @@ -1063,6 +1066,11 @@ static inline struct dma_chan *__dma_request_channel(const dma_cap_mask_t *mask, { return NULL; } +static inline struct dma_chan *dma_request_slave_channel_reason( + struct device *dev, const char *name) +{ + return ERR_PTR(-ENODEV); +} static inline struct dma_chan *dma_request_slave_channel(struct device *dev, const char *name) { -- cgit v1.2.3 From 8010dad55a0ab0e829f3733854e5235eef4e2734 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Tue, 26 Nov 2013 12:40:51 -0700 Subject: dma: add dma_get_any_slave_channel(), for use in of_xlate() mmp_pdma.c implements a custom of_xlate() function that is 95% identical to what Tegra will need. Create a function to implement the common part, so everyone doesn't just cut/paste the implementation. Cc: Dan Williams Cc: Vinod Koul Cc: Lars-Peter Clausen Cc: dmaengine@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Stephen Warren Signed-off-by: Vinod Koul --- include/linux/dmaengine.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 41cf0c399288..09ef23ee8bce 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -1079,6 +1079,7 @@ int dma_async_device_register(struct dma_device *device); void dma_async_device_unregister(struct dma_device *device); void dma_run_dependencies(struct dma_async_tx_descriptor *tx); struct dma_chan *dma_get_slave_channel(struct dma_chan *chan); +struct dma_chan *dma_get_any_slave_channel(struct dma_device *device); struct dma_chan *net_dma_find_channel(void); #define dma_request_channel(mask, x, y) __dma_request_channel(&(mask), x, y) #define dma_request_slave_channel_compat(mask, x, y, dev, name) \ -- cgit v1.2.3 From 80b28791ff0416a472e5a555a4b6f5f39df2fc24 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 6 Nov 2013 15:45:46 -0700 Subject: ARM: tegra: pass reset to tegra_powergate_sequence_power_up() Tegra's clock driver now provides an implementation of the common reset API (include/linux/reset.h). Use this instead of the old Tegra- specific API; that will soon be removed. Signed-off-by: Stephen Warren Acked-by: Bjorn Helgaas Acked-By: Terje Bergstrom Reviewed-by: Thierry Reding Acked-by: Thierry Reding --- include/linux/tegra-powergate.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/tegra-powergate.h b/include/linux/tegra-powergate.h index fd4498329c7c..afe442d2629a 100644 --- a/include/linux/tegra-powergate.h +++ b/include/linux/tegra-powergate.h @@ -19,6 +19,7 @@ #define _MACH_TEGRA_POWERGATE_H_ struct clk; +struct reset_control; #define TEGRA_POWERGATE_CPU 0 #define TEGRA_POWERGATE_3D 1 @@ -52,7 +53,8 @@ int tegra_powergate_power_off(int id); int tegra_powergate_remove_clamping(int id); /* Must be called with clk disabled, and returns with clk enabled */ -int tegra_powergate_sequence_power_up(int id, struct clk *clk); +int tegra_powergate_sequence_power_up(int id, struct clk *clk, + struct reset_control *rst); #else static inline int tegra_powergate_is_powered(int id) { @@ -74,7 +76,8 @@ static inline int tegra_powergate_remove_clamping(int id) return -ENOSYS; } -static inline int tegra_powergate_sequence_power_up(int id, struct clk *clk) +static inline int tegra_powergate_sequence_power_up(int id, struct clk *clk, + struct reset_control *rst); { return -ENOSYS; } -- cgit v1.2.3 From 2ae77527bb1a510070d039aaa22d1ae9a5807b6f Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 6 Nov 2013 16:58:16 -0700 Subject: clk: tegra: remove legacy reset APIs Now that no code uses the custom Tegra module reset API, we can remove its implementation. Signed-off-by: Stephen Warren Reviewed-by: Thierry Reding Acked-By: Peter De Schrijver --- include/linux/clk/tegra.h | 7 ------- 1 file changed, 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/clk/tegra.h b/include/linux/clk/tegra.h index 23a0ceee831f..3ca9fca827a2 100644 --- a/include/linux/clk/tegra.h +++ b/include/linux/clk/tegra.h @@ -120,13 +120,6 @@ static inline void tegra_cpu_clock_resume(void) } #endif -#ifdef CONFIG_ARCH_TEGRA -void tegra_periph_reset_deassert(struct clk *c); -void tegra_periph_reset_assert(struct clk *c); -#else -static inline void tegra_periph_reset_deassert(struct clk *c) {} -static inline void tegra_periph_reset_assert(struct clk *c) {} -#endif void tegra_clocks_apply_init_table(void); #endif /* __LINUX_CLK_TEGRA_H_ */ -- cgit v1.2.3 From 9a716579660aa87a4ab4b4d1cac0686fba3707ba Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 13 Dec 2013 17:31:03 +0100 Subject: ARM: tegra: Add Tegra124 powergate support Three new gates have been added for Tegra124: SOR, VIC and IRAM. In addition, PCIe and SATA gates are again supported, like on Tegra20 and Tegra30. Signed-off-by: Thierry Reding Signed-off-by: Stephen Warren --- include/linux/tegra-powergate.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/tegra-powergate.h b/include/linux/tegra-powergate.h index afe442d2629a..bccad3cfff87 100644 --- a/include/linux/tegra-powergate.h +++ b/include/linux/tegra-powergate.h @@ -38,11 +38,14 @@ struct reset_control; #define TEGRA_POWERGATE_CPU0 14 #define TEGRA_POWERGATE_C0NC 15 #define TEGRA_POWERGATE_C1NC 16 +#define TEGRA_POWERGATE_SOR 17 #define TEGRA_POWERGATE_DIS 18 #define TEGRA_POWERGATE_DISB 19 #define TEGRA_POWERGATE_XUSBA 20 #define TEGRA_POWERGATE_XUSBB 21 #define TEGRA_POWERGATE_XUSBC 22 +#define TEGRA_POWERGATE_VIC 23 +#define TEGRA_POWERGATE_IRAM 24 #define TEGRA_POWERGATE_3D0 TEGRA_POWERGATE_3D -- cgit v1.2.3 From 9d4450ae87398e248e8700e3507748e0d1751e25 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Mon, 16 Dec 2013 21:42:28 +0100 Subject: ARM: tegra: Add IO rail support Add tegra_io_rail_power_off() and tegra_io_rail_power_on() functions to put IO rails into or out of deep powerdown mode, respectively. Signed-off-by: Thierry Reding Signed-off-by: Stephen Warren --- include/linux/tegra-powergate.h | 45 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) (limited to 'include/linux') diff --git a/include/linux/tegra-powergate.h b/include/linux/tegra-powergate.h index bccad3cfff87..e6f2ab3014a7 100644 --- a/include/linux/tegra-powergate.h +++ b/include/linux/tegra-powergate.h @@ -49,6 +49,38 @@ struct reset_control; #define TEGRA_POWERGATE_3D0 TEGRA_POWERGATE_3D +#define TEGRA_IO_RAIL_CSIA 0 +#define TEGRA_IO_RAIL_CSIB 1 +#define TEGRA_IO_RAIL_DSI 2 +#define TEGRA_IO_RAIL_MIPI_BIAS 3 +#define TEGRA_IO_RAIL_PEX_BIAS 4 +#define TEGRA_IO_RAIL_PEX_CLK1 5 +#define TEGRA_IO_RAIL_PEX_CLK2 6 +#define TEGRA_IO_RAIL_USB0 9 +#define TEGRA_IO_RAIL_USB1 10 +#define TEGRA_IO_RAIL_USB2 11 +#define TEGRA_IO_RAIL_USB_BIAS 12 +#define TEGRA_IO_RAIL_NAND 13 +#define TEGRA_IO_RAIL_UART 14 +#define TEGRA_IO_RAIL_BB 15 +#define TEGRA_IO_RAIL_AUDIO 17 +#define TEGRA_IO_RAIL_HSIC 19 +#define TEGRA_IO_RAIL_COMP 22 +#define TEGRA_IO_RAIL_HDMI 28 +#define TEGRA_IO_RAIL_PEX_CNTRL 32 +#define TEGRA_IO_RAIL_SDMMC1 33 +#define TEGRA_IO_RAIL_SDMMC3 34 +#define TEGRA_IO_RAIL_SDMMC4 35 +#define TEGRA_IO_RAIL_CAM 36 +#define TEGRA_IO_RAIL_RES 37 +#define TEGRA_IO_RAIL_HV 38 +#define TEGRA_IO_RAIL_DSIB 39 +#define TEGRA_IO_RAIL_DSIC 40 +#define TEGRA_IO_RAIL_DSID 41 +#define TEGRA_IO_RAIL_CSIE 44 +#define TEGRA_IO_RAIL_LVDS 57 +#define TEGRA_IO_RAIL_SYS_DDC 58 + #ifdef CONFIG_ARCH_TEGRA int tegra_powergate_is_powered(int id); int tegra_powergate_power_on(int id); @@ -58,6 +90,9 @@ int tegra_powergate_remove_clamping(int id); /* Must be called with clk disabled, and returns with clk enabled */ int tegra_powergate_sequence_power_up(int id, struct clk *clk, struct reset_control *rst); + +int tegra_io_rail_power_on(int id); +int tegra_io_rail_power_off(int id); #else static inline int tegra_powergate_is_powered(int id) { @@ -84,6 +119,16 @@ static inline int tegra_powergate_sequence_power_up(int id, struct clk *clk, { return -ENOSYS; } + +static inline int tegra_io_rail_power_on(int id) +{ + return -ENOSYS; +} + +static inline int tegra_io_rail_power_off(int id) +{ + return -ENOSYS; +} #endif #endif /* _MACH_TEGRA_POWERGATE_H_ */ -- cgit v1.2.3 From 4de6a2d6acb0e2a840f07db17def7e674b9d2bb4 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Mon, 2 Sep 2013 09:48:53 +0200 Subject: gpu: host1x: Add MIPI pad calibration support This driver adds support to perform calibration of the MIPI pads for CSI and DSI. Signed-off-by: Thierry Reding --- include/linux/host1x.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/host1x.h b/include/linux/host1x.h index f5b9b87ac9a9..3af847273277 100644 --- a/include/linux/host1x.h +++ b/include/linux/host1x.h @@ -281,4 +281,10 @@ int host1x_device_exit(struct host1x_device *device); int host1x_client_register(struct host1x_client *client); int host1x_client_unregister(struct host1x_client *client); +struct tegra_mipi_device; + +struct tegra_mipi_device *tegra_mipi_request(struct device *device); +void tegra_mipi_free(struct tegra_mipi_device *device); +int tegra_mipi_calibrate(struct tegra_mipi_device *device); + #endif -- cgit v1.2.3