From 19dde0bd71e3dffb03ddc509019e22250f4e20c0 Mon Sep 17 00:00:00 2001 From: Janusz Dziedzic Date: Thu, 21 Mar 2013 15:47:54 +0100 Subject: cfg80211: add P2P Notice of Absence attribute Add P2P Notice of Absence attribute structure. Signed-off-by: Janusz Dziedzic Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 4cf0c9e4dd99..d10b5bba3268 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1027,6 +1027,26 @@ enum ieee80211_p2p_attr_id { IEEE80211_P2P_ATTR_MAX }; +/* Notice of Absence attribute - described in P2P spec 4.1.14 */ +/* Typical max value used here */ +#define IEEE80211_P2P_NOA_DESC_MAX 4 + +struct ieee80211_p2p_noa_desc { + u8 count; + __le32 duration; + __le32 interval; + __le32 start_time; +} __packed; + +struct ieee80211_p2p_noa_attr { + u8 index; + u8 oppps_ctwindow; + struct ieee80211_p2p_noa_desc desc[IEEE80211_P2P_NOA_DESC_MAX]; +} __packed; + +#define IEEE80211_P2P_OPPPS_ENABLE_BIT BIT(7) +#define IEEE80211_P2P_OPPPS_CTWINDOW_MASK 0x7F + /** * struct ieee80211_bar - HT Block Ack Request * -- cgit v1.2.3 From 79ba1d8910f517c3bd39d794ddb1a5b4c03795c4 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 27 Mar 2013 14:38:07 +0100 Subject: mac80211: parse Timeout Interval Element using a struct Instead of open-coding the accesses and length check do the length check in the IE parser and assign a struct pointer for use in the remaining code. Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index d10b5bba3268..e46fea8b972e 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1955,6 +1955,16 @@ enum ieee80211_timeout_interval_type { WLAN_TIMEOUT_ASSOC_COMEBACK = 3 /* 802.11w */, }; +/** + * struct ieee80211_timeout_interval_ie - Timeout Interval element + * @type: type, see &enum ieee80211_timeout_interval_type + * @value: timeout interval value + */ +struct ieee80211_timeout_interval_ie { + u8 type; + __le32 value; +} __packed; + /* BACK action code */ enum ieee80211_back_actioncode { WLAN_ACTION_ADDBA_REQ = 0, -- cgit v1.2.3 From 1640f28f6b839637d9b82a3c4a19120601e59c66 Mon Sep 17 00:00:00 2001 From: Franky Lin Date: Thu, 11 Apr 2013 13:28:51 +0200 Subject: brcmfmac: add support for dongle ARM CR4 core Newer WiFi chip use ARM CR4 core to achieve higher performance. Add necessary code for host driver in order to support CR4 core. Reviewed-by: Arend van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- include/linux/bcma/bcma.h | 1 + include/linux/bcma/bcma_regs.h | 1 + 2 files changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index 0ab6712fd76b..f14a98a79c9d 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -134,6 +134,7 @@ struct bcma_host_ops { #define BCMA_CORE_I2S 0x834 #define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */ #define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */ +#define BCMA_CORE_ARM_CR4 0x83e #define BCMA_CORE_DEFAULT 0xFFF #define BCMA_MAX_NR_CORES 16 diff --git a/include/linux/bcma/bcma_regs.h b/include/linux/bcma/bcma_regs.h index 7e8104bb7a7e..917dcd7965e7 100644 --- a/include/linux/bcma/bcma_regs.h +++ b/include/linux/bcma/bcma_regs.h @@ -37,6 +37,7 @@ #define BCMA_IOST_BIST_DONE 0x8000 #define BCMA_RESET_CTL 0x0800 #define BCMA_RESET_CTL_RESET 0x0001 +#define BCMA_RESET_ST 0x0804 /* BCMA PCI config space registers. */ #define BCMA_PCI_PMCSR 0x44 -- cgit v1.2.3 From 1e9ab4dd258ecbb0f1c377fd4dbe227cdb93d9bd Mon Sep 17 00:00:00 2001 From: Piotr Haber Date: Thu, 11 Apr 2013 13:28:52 +0200 Subject: brcmfmac: setup SDIO reset behavior Set device in a manner that SDIO I/O card reset will lead to WLAN backplane and PMU state reset. Reviewed-by: Hante Meuleman Reviewed-by: Arend van Spriel Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Franky (Zhenhui) Lin Signed-off-by: Piotr Haber Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- include/linux/bcma/bcma_driver_chipcommon.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index 453fcc914683..b8b09eac60a4 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -316,6 +316,9 @@ #define BCMA_CC_PMU_CTL 0x0600 /* PMU control */ #define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ #define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16 +#define BCMA_CC_PMU_CTL_RES 0x00006000 /* reset control mask */ +#define BCMA_CC_PMU_CTL_RES_SHIFT 13 +#define BCMA_CC_PMU_CTL_RES_RELOAD 0x2 /* reload POR values */ #define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400 #define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ #define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ -- cgit v1.2.3 From 668761ac01d6f5a36b8e5a24d4e154550e2c4c3b Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Fri, 12 Apr 2013 10:55:55 +0200 Subject: brcmfmac: define and use platform specific data for SDIO. This patch adds support for platform specific data for SDIO fullmac devices. Currently OOB interrupts are configured by Kconfig BRCMFMAC_SDIO_OOB but that is now determined dynamically by checking availibility of platform data. Cc: Hauke Mehrtens Reviewed-by: Arend Van Spriel Reviewed-by: Franky (Zhenhui) Lin Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- include/linux/platform_data/brcmfmac-sdio.h | 124 ++++++++++++++++++++++++++++ 1 file changed, 124 insertions(+) create mode 100644 include/linux/platform_data/brcmfmac-sdio.h (limited to 'include/linux') diff --git a/include/linux/platform_data/brcmfmac-sdio.h b/include/linux/platform_data/brcmfmac-sdio.h new file mode 100644 index 000000000000..1ade657d5fc1 --- /dev/null +++ b/include/linux/platform_data/brcmfmac-sdio.h @@ -0,0 +1,124 @@ +/* + * Copyright (c) 2013 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _LINUX_BRCMFMAC_PLATFORM_H +#define _LINUX_BRCMFMAC_PLATFORM_H + +/* + * Platform specific driver functions and data. Through the platform specific + * device data functions can be provided to help the brcmfmac driver to + * operate with the device in combination with the used platform. + * + * Use the platform data in the following (similar) way: + * + * +#include + + +static void brcmfmac_power_on(void) +{ +} + +static void brcmfmac_power_off(void) +{ +} + +static void brcmfmac_reset(void) +{ +} + +static struct brcmfmac_sdio_platform_data brcmfmac_sdio_pdata = { + .power_on = brcmfmac_power_on, + .power_off = brcmfmac_power_off, + .reset = brcmfmac_reset +}; + +static struct platform_device brcmfmac_device = { + .name = BRCMFMAC_SDIO_PDATA_NAME, + .id = PLATFORM_DEVID_NONE, + .dev.platform_data = &brcmfmac_sdio_pdata +}; + +void __init brcmfmac_init_pdata(void) +{ + brcmfmac_sdio_pdata.oob_irq_supported = true; + brcmfmac_sdio_pdata.oob_irq_nr = gpio_to_irq(GPIO_BRCMF_SDIO_OOB); + brcmfmac_sdio_pdata.oob_irq_flags = IORESOURCE_IRQ | + IORESOURCE_IRQ_HIGHLEVEL; + platform_device_register(&brcmfmac_device); +} + * + * + * Note: the brcmfmac can be loaded as module or be statically built-in into + * the kernel. If built-in then do note that it uses module_init (and + * module_exit) routines which equal device_initcall. So if you intend to + * create a module with the platform specific data for the brcmfmac and have + * it built-in to the kernel then use a higher initcall then device_initcall + * (see init.h). If this is not done then brcmfmac will load without problems + * but will not pickup the platform data. + * + * When the driver does not "detect" platform driver data then it will continue + * without reporting anything and just assume there is no data needed. Which is + * probably true for most platforms. + * + * Explanation of the platform_data fields: + * + * drive_strength: is the preferred drive_strength to be used for the SDIO + * pins. If 0 then a default value will be used. This is the target drive + * strength, the exact drive strength which will be used depends on the + * capabilities of the device. + * + * oob_irq_supported: does the board have support for OOB interrupts. SDIO + * in-band interrupts are relatively slow and for having less overhead on + * interrupt processing an out of band interrupt can be used. If the HW + * supports this then enable this by setting this field to true and configure + * the oob related fields. + * + * oob_irq_nr, oob_irq_flags: the OOB interrupt information. The values are + * used for registering the irq using request_irq function. + * + * power_on: This function is called by the brcmfmac when the module gets + * loaded. This can be particularly useful for low power devices. The platform + * spcific routine may for example decide to power up the complete device. + * If there is no use-case for this function then provide NULL. + * + * power_off: This function is called by the brcmfmac when the module gets + * unloaded. At this point the device can be powered down or otherwise be reset. + * So if an actual power_off is not supported but reset is then reset the device + * when this function gets called. This can be particularly useful for low power + * devices. If there is no use-case for this function (either power-down or + * reset) then provide NULL. + * + * reset: This function can get called if the device communication broke down. + * This functionality is particularly useful in case of SDIO type devices. It is + * possible to reset a dongle via sdio data interface, but it requires that + * this is fully functional. This function is chip/module specific and this + * function should return only after the complete reset has completed. + */ + +#define BRCMFMAC_SDIO_PDATA_NAME "brcmfmac_sdio" + +struct brcmfmac_sdio_platform_data { + unsigned int drive_strength; + bool oob_irq_supported; + unsigned int oob_irq_nr; + unsigned long oob_irq_flags; + void (*power_on)(void); + void (*power_off)(void); + void (*reset)(void); +}; + +#endif /* _LINUX_BRCMFMAC_PLATFORM_H */ -- cgit v1.2.3 From 37799e52a29af2268d1fbe18908a0d6b9f68af88 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 26 Mar 2013 14:02:26 +0100 Subject: mac80211: unify CSA action frame/beacon processing CSA action frame content should be processed as variable IEs rather than fixed to make it extensible. Unify the code and process them just like CSA in beacons to make it easier to extend for HT/VHT. Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index e46fea8b972e..8f80b3a93501 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -840,9 +840,7 @@ struct ieee80211_mgmt { } __packed wme_action; struct{ u8 action_code; - u8 element_id; - u8 length; - struct ieee80211_channel_sw_ie sw_elem; + u8 variable[0]; } __packed chan_switch; struct{ u8 action_code; -- cgit v1.2.3 From b4f286a1c0ad0b84c2d502b354d4d98d5a86c64b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 26 Mar 2013 14:13:58 +0100 Subject: mac80211: support extended channel switch Support extended channel switch when the operating class is one of the global operating classes as defined in Annex E of 802.11-2012. If it isn't, disconnect from the AP instead. Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 8f80b3a93501..2a10acc65a54 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -672,6 +672,18 @@ struct ieee80211_channel_sw_ie { u8 count; } __packed; +/** + * struct ieee80211_ext_chansw_ie + * + * This structure represents the "Extended Channel Switch Announcement element" + */ +struct ieee80211_ext_chansw_ie { + u8 mode; + u8 new_operating_class; + u8 new_ch_num; + u8 count; +} __packed; + /** * struct ieee80211_tim * -- cgit v1.2.3 From 85220d71bf3ca1ba9129e0744247ae5f61bec559 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 25 Mar 2013 18:29:27 +0100 Subject: mac80211: support secondary channel offset in CSA Add support for the secondary channel offset IE in channel switch announcements. This is necessary for proper handling of CSA on HT access points. For this to work it is also necessary to convert everything here to use chandef structs instead of just channels. The driver updates aren't really correct though. In particular, the TI wl18xx driver update can't possibly be right since it just ignores the new channel width for lack of firmware API. Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 2a10acc65a54..95621528436c 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -684,6 +684,16 @@ struct ieee80211_ext_chansw_ie { u8 count; } __packed; +/** + * struct ieee80211_sec_chan_offs_ie - secondary channel offset IE + * @sec_chan_offs: secondary channel offset, uses IEEE80211_HT_PARAM_CHA_SEC_* + * values here + * This structure represents the "Secondary Channel Offset element" + */ +struct ieee80211_sec_chan_offs_ie { + u8 sec_chan_offs; +} __packed; + /** * struct ieee80211_tim * @@ -1648,6 +1658,7 @@ enum ieee80211_eid { WLAN_EID_HT_CAPABILITY = 45, WLAN_EID_HT_OPERATION = 61, + WLAN_EID_SECONDARY_CHANNEL_OFFSET = 62, WLAN_EID_RSN = 48, WLAN_EID_MMIE = 76, -- cgit v1.2.3 From 1b3a2e494bc793445f576c5476e9767cf7621684 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 26 Mar 2013 15:17:18 +0100 Subject: mac80211: handle extended channel switch announcement Handle the (public) extended channel switch announcement action frames. Parts of the data in these frames isn't really in IEs, but put it into the elems struct anyway to simplify the handling. Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 95621528436c..ce07161c8735 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -864,6 +864,11 @@ struct ieee80211_mgmt { u8 action_code; u8 variable[0]; } __packed chan_switch; + struct{ + u8 action_code; + struct ieee80211_ext_chansw_ie data; + u8 variable[0]; + } __packed ext_chan_switch; struct{ u8 action_code; u8 dialog_token; @@ -1816,6 +1821,7 @@ enum ieee80211_key_len { /* Public action codes */ enum ieee80211_pub_actioncode { + WLAN_PUB_ACTION_EXT_CHANSW_ANN = 4, WLAN_PUB_ACTION_TDLS_DISCOVER_RES = 14, }; -- cgit v1.2.3 From b2e506bfc4d752b68a0ccaae1e977898263eba4c Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 26 Mar 2013 14:54:16 +0100 Subject: mac80211: parse VHT channel switch IEs VHT introduces multiple IEs that need to be parsed for a wide bandwidth channel switch. Two are (currently) needed in mac80211: * wide bandwidth channel switch element * channel switch wrapper element The former is contained in the latter for beacons and probe responses, but not for the spectrum management action frames so the IE parser needs a new argument to differentiate them. Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index ce07161c8735..06b0ed0154a4 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -694,6 +694,14 @@ struct ieee80211_sec_chan_offs_ie { u8 sec_chan_offs; } __packed; +/** + * struct ieee80211_wide_bw_chansw_ie - wide bandwidth channel switch IE + */ +struct ieee80211_wide_bw_chansw_ie { + u8 new_channel_width; + u8 new_center_freq_seg0, new_center_freq_seg1; +} __packed; + /** * struct ieee80211_tim * @@ -1698,6 +1706,8 @@ enum ieee80211_eid { WLAN_EID_VHT_CAPABILITY = 191, WLAN_EID_VHT_OPERATION = 192, WLAN_EID_OPMODE_NOTIF = 199, + WLAN_EID_WIDE_BW_CHANNEL_SWITCH = 194, + WLAN_EID_CHANNEL_SWITCH_WRAPPER = 196, /* 802.11ad */ WLAN_EID_NON_TX_BSSID_CAP = 83, -- cgit v1.2.3