From dbd2fd656f2060abfd3a16257f8b51ec60f6d2ed Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 9 Dec 2010 19:58:59 +0100 Subject: cfg80211/nl80211: separate unicast/multicast default TX keys Allow userspace to specify that a given key is default only for unicast and/or multicast transmissions. Only WEP keys are for both, WPA/RSN keys set here are GTKs for multicast only. For more future flexibility, allow to specify all combiations. Wireless extensions can only set both so use nl80211; WEP keys (connect keys) must be set as default for both (but 802.1X WEP is still possible). Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 380421253d16..b8fa25d741ba 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -851,6 +851,10 @@ enum nl80211_commands { * * @NL80211_ATTR_BSS_HTOPMODE: HT operation mode (u16) * + * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags + * attributes, specifying what a key should be set as default as. + * See &enum nl80211_key_default_types. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1029,6 +1033,8 @@ enum nl80211_attrs { NL80211_ATTR_BSS_HT_OPMODE, + NL80211_ATTR_KEY_DEFAULT_TYPES, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -1774,6 +1780,23 @@ enum nl80211_wpa_versions { NL80211_WPA_VERSION_2 = 1 << 1, }; +/** + * enum nl80211_key_default_types - key default types + * @__NL80211_KEY_DEFAULT_TYPE_INVALID: invalid + * @NL80211_KEY_DEFAULT_TYPE_UNICAST: key should be used as default + * unicast key + * @NL80211_KEY_DEFAULT_TYPE_MULTICAST: key should be used as default + * multicast key + * @NUM_NL80211_KEY_DEFAULT_TYPES: number of default types + */ +enum nl80211_key_default_types { + __NL80211_KEY_DEFAULT_TYPE_INVALID, + NL80211_KEY_DEFAULT_TYPE_UNICAST, + NL80211_KEY_DEFAULT_TYPE_MULTICAST, + + NUM_NL80211_KEY_DEFAULT_TYPES +}; + /** * enum nl80211_key_attributes - key attributes * @__NL80211_KEY_INVALID: invalid @@ -1790,6 +1813,9 @@ enum nl80211_wpa_versions { * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not * specified the default depends on whether a MAC address was * given with the command using the key or not (u32) + * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags + * attributes, specifying what a key should be set as default as. + * See &enum nl80211_key_default_types. * @__NL80211_KEY_AFTER_LAST: internal * @NL80211_KEY_MAX: highest key attribute */ @@ -1802,6 +1828,7 @@ enum nl80211_key_attributes { NL80211_KEY_DEFAULT, NL80211_KEY_DEFAULT_MGMT, NL80211_KEY_TYPE, + NL80211_KEY_DEFAULT_TYPES, /* keep last */ __NL80211_KEY_AFTER_LAST, -- cgit v1.2.3 From 44316cb1e97a1e7f76eb3f07e5b0ba91d72e9693 Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Thu, 9 Dec 2010 18:24:41 -0800 Subject: ieee80211: add Parameter Set Count bitmask WMM IE QoS Info field lower 4 bits: Parameter Set Count Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 351c0ab4e284..7f2354534242 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -122,6 +122,7 @@ /* U-APSD queue for WMM IEs sent by AP */ #define IEEE80211_WMM_IE_AP_QOSINFO_UAPSD (1<<7) +#define IEEE80211_WMM_IE_AP_QOSINFO_PARAM_SET_CNT_MASK 0x0f /* U-APSD queues for WMM IEs sent by STA */ #define IEEE80211_WMM_IE_STA_QOSINFO_AC_VO (1<<0) -- cgit v1.2.3 From a293911d4fd5e8593dbf478399a77f990d466269 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 14 Dec 2010 17:54:28 +0100 Subject: nl80211: advertise maximum remain-on-channel duration With the upcoming hardware offload implementation, some devices will have a different maximum duration for the remain-on-channel command. Advertise the maximum duration in mac80211, and make mac80211 set it. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index b8fa25d741ba..1cee56b3a79a 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -773,6 +773,9 @@ enum nl80211_commands { * cache, a wiphy attribute. * * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32. + * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that + * specifies the maximum duration that can be requested with the + * remain-on-channel operation, in milliseconds, u32. * * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects. * @@ -1035,6 +1038,8 @@ enum nl80211_attrs { NL80211_ATTR_KEY_DEFAULT_TYPES, + NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.3 From cf4e594ea7e55555e81647b74a3a8e8b2826a529 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Thu, 16 Dec 2010 00:52:40 +0200 Subject: nl80211: Add notification for dropped Deauth/Disassoc Add a new notification to indicate that a received, unprotected Deauthentication or Disassociation frame was dropped due to management frame protection being in use. This notification is needed to allow user space (e.g., wpa_supplicant) to implement SA Query procedure to recover from association state mismatch between an AP and STA. This is needed to avoid getting stuck in non-working state when MFP (IEEE 802.11w) is used and a protected Deauthentication or Disassociation frame is dropped for any reason. After that, the station would silently discard any unprotected Deauthentication or Disassociation frame that could be indicating that the AP does not have association for the STA (when the Reason Code would be 6 or 7). IEEE Std 802.11w-2009, 11.13 describes this recovery mechanism. Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- include/linux/nl80211.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 1cee56b3a79a..7483a89cee8f 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -399,6 +399,13 @@ * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the * network is determined by the network interface. * + * @NL80211_CMD_UNPROT_DEAUTHENTICATE: Unprotected deauthentication frame + * notification. This event is used to indicate that an unprotected + * deauthentication frame was dropped when MFP is in use. + * @NL80211_CMD_UNPROT_DISASSOCIATE: Unprotected disassociation frame + * notification. This event is used to indicate that an unprotected + * disassociation frame was dropped when MFP is in use. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -508,6 +515,9 @@ enum nl80211_commands { NL80211_CMD_JOIN_MESH, NL80211_CMD_LEAVE_MESH, + NL80211_CMD_UNPROT_DEAUTHENTICATE, + NL80211_CMD_UNPROT_DISASSOCIATE, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ -- cgit v1.2.3 From 24bdd9f4c9af75b33b438d60381a67626de0128d Mon Sep 17 00:00:00 2001 From: Javier Cardona Date: Thu, 16 Dec 2010 17:37:48 -0800 Subject: mac80211: Rename mesh_params to mesh_config to prepare for mesh_setup Mesh parameters can be to setup a mesh or to configure it. This patch renames the ambiguous name mesh_params to mesh_config in preparation for mesh_setup. Signed-off-by: Javier Cardona Signed-off-by: John W. Linville --- include/linux/nl80211.h | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 7483a89cee8f..11a1de67b618 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -172,10 +172,10 @@ * to the specified ISO/IEC 3166-1 alpha2 country code. The core will * store this as a valid request and then query userspace for it. * - * @NL80211_CMD_GET_MESH_PARAMS: Get mesh networking properties for the + * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the * interface identified by %NL80211_ATTR_IFINDEX * - * @NL80211_CMD_SET_MESH_PARAMS: Set mesh networking properties for the + * @NL80211_CMD_SET_MESH_CONFIG: Set mesh networking properties for the * interface identified by %NL80211_ATTR_IFINDEX * * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The @@ -448,8 +448,8 @@ enum nl80211_commands { NL80211_CMD_SET_REG, NL80211_CMD_REQ_SET_REG, - NL80211_CMD_GET_MESH_PARAMS, - NL80211_CMD_SET_MESH_PARAMS, + NL80211_CMD_GET_MESH_CONFIG, + NL80211_CMD_SET_MESH_CONFIG, NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */, @@ -538,6 +538,10 @@ enum nl80211_commands { #define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE #define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT +/* source-level API compatibility */ +#define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG +#define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG + /** * enum nl80211_attrs - nl80211 netlink attributes * @@ -922,7 +926,7 @@ enum nl80211_attrs { NL80211_ATTR_REG_ALPHA2, NL80211_ATTR_REG_RULES, - NL80211_ATTR_MESH_PARAMS, + NL80211_ATTR_MESH_CONFIG, NL80211_ATTR_BSS_BASIC_RATES, @@ -1058,6 +1062,7 @@ enum nl80211_attrs { /* source-level API compatibility */ #define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION +#define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG /* * Allow user space programs to use #ifdef on new attributes by defining them -- cgit v1.2.3 From c80d545da3f7c0e534ccd4a780f322f80a92cff1 Mon Sep 17 00:00:00 2001 From: Javier Cardona Date: Thu, 16 Dec 2010 17:37:49 -0800 Subject: mac80211: Let userspace enable and configure vendor specific path selection. Userspace will now be allowed to toggle between the default path selection algorithm (HWMP, implemented in the kernel), and a vendor specific alternative. Also in the same patch, allow userspace to add information elements to mesh beacons. This is accordance with the Extensible Path Selection Framework specified in version 7.0 of the 802.11s draft. Signed-off-by: Javier Cardona Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 25 +++++++++++++++++++++++++ include/linux/nl80211.h | 47 +++++++++++++++++++++++++++++++++++++++++++---- 2 files changed, 68 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 7f2354534242..cd681681d211 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1291,6 +1291,31 @@ enum ieee80211_key_len { WLAN_KEY_LEN_AES_CMAC = 16, }; +/** + * enum - mesh path selection protocol identifier + * + * @IEEE80211_PATH_PROTOCOL_HWMP: the default path selection protocol + * @IEEE80211_PATH_PROTOCOL_VENDOR: a vendor specific protocol that will + * be specified in a vendor specific information element + */ +enum { + IEEE80211_PATH_PROTOCOL_HWMP = 0, + IEEE80211_PATH_PROTOCOL_VENDOR = 255, +}; + +/** + * enum - mesh path selection metric identifier + * + * @IEEE80211_PATH_METRIC_AIRTIME: the default path selection metric + * @IEEE80211_PATH_METRIC_VENDOR: a vendor specific metric that will be + * specified in a vendor specific information element + */ +enum { + IEEE80211_PATH_METRIC_AIRTIME = 0, + IEEE80211_PATH_METRIC_VENDOR = 255, +}; + + /* * IEEE 802.11-2007 7.3.2.9 Country information element * diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 11a1de67b618..69eaccac78c4 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -872,6 +872,9 @@ enum nl80211_commands { * attributes, specifying what a key should be set as default as. * See &enum nl80211_key_default_types. * + * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters. These cannot be + * changed once the mesh is active. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1054,6 +1057,8 @@ enum nl80211_attrs { NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION, + NL80211_ATTR_MESH_SETUP, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -1564,7 +1569,8 @@ enum nl80211_mntr_flags { /** * enum nl80211_meshconf_params - mesh configuration parameters * - * Mesh configuration parameters + * Mesh configuration parameters. These can be changed while the mesh is + * active. * * @__NL80211_MESHCONF_INVALID: internal use * @@ -1587,9 +1593,6 @@ enum nl80211_mntr_flags { * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh * point. * - * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a - * source mesh point for path selection elements. - * * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically * open peer links when we detect compatible mesh peers. * @@ -1616,6 +1619,9 @@ enum nl80211_mntr_flags { * * @NL80211_MESHCONF_ROOTMODE: whether root mode is enabled or not * + * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a + * source mesh point for path selection elements. + * * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use @@ -1643,6 +1649,39 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1 }; +/** + * enum nl80211_mesh_setup_params - mesh setup parameters + * + * Mesh setup parameters. These are used to start/join a mesh and cannot be + * changed while the mesh is active. + * + * @__NL80211_MESH_SETUP_INVALID: Internal use + * + * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a + * vendor specific path selection algorithm or disable it to use the default + * HWMP. + * + * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a + * vendor specific path metric or disable it to use the default Airtime + * metric. + * + * @NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE: A vendor specific information + * element that vendors will use to identify the path selection methods and + * metrics in use. + * + * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use + */ +enum nl80211_mesh_setup_params { + __NL80211_MESH_SETUP_INVALID, + NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL, + NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC, + NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE, + + /* keep last */ + __NL80211_MESH_SETUP_ATTR_AFTER_LAST, + NL80211_MESH_SETUP_ATTR_MAX = __NL80211_MESH_SETUP_ATTR_AFTER_LAST - 1 +}; + /** * enum nl80211_txq_attr - TX queue parameter attributes * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved -- cgit v1.2.3 From 39fd5de4472b7b222c6cec78d72b069133f694e4 Mon Sep 17 00:00:00 2001 From: Bruno Randolf Date: Thu, 16 Dec 2010 11:30:28 +0900 Subject: nl80211: Export available antennas Export the information which antennas are available for configuration as TX or RX antennas via nl80211. Signed-off-by: Bruno Randolf Signed-off-by: John W. Linville --- include/linux/nl80211.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 69eaccac78c4..2b89b712565b 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -858,6 +858,12 @@ enum nl80211_commands { * the hardware should not be configured to receive on this antenna. * For a more detailed descripton see @NL80211_ATTR_WIPHY_ANTENNA_TX. * + * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available + * for configuration as TX antennas via the above parameters. + * + * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX: Bitmap of antennas which are available + * for configuration as RX antennas via the above parameters. + * * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS * * @NL80211_ATTR_OFFCHANNEL_TX_OK: For management frame TX, the frame may be @@ -1059,6 +1065,9 @@ enum nl80211_attrs { NL80211_ATTR_MESH_SETUP, + NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX, + NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.3 From 61ad5394590c5c5338ab4ec50553d809a9996d50 Mon Sep 17 00:00:00 2001 From: Javier Cardona Date: Thu, 16 Dec 2010 17:23:34 -0800 Subject: mac80211: Remove unused third address from mesh address extension header. The Mesh Control header only includes 0, 1 or 2 addresses. If there is one address, it should be interpreted as Address 4. If there are 2, they are interpreted as Addresses 5 and 6 (Address 4 being the 4th address in the 802.11 header). The address extension used to hold up to 3 addresses instead of the current 2. I'm not sure which draft version changed this, but it is very unlikely that it will change again given the state of the approval process of this draft. See section 7.1.3.6.3 in current draft (8.0). Also, note that the extra address that I'm removing was not being used, so this change has no effect on over-the-air frame formats. But I thought I better remove it before someone does start using it. Signed-off-by: Javier Cardona Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index cd681681d211..6042228954a7 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -536,7 +536,6 @@ struct ieee80211s_hdr { __le32 seqnum; u8 eaddr1[6]; u8 eaddr2[6]; - u8 eaddr3[6]; } __attribute__ ((packed)); /* Mesh flags */ -- cgit v1.2.3