From 9705ecc5c1f8f34f756164a711b4cc61110c0283 Mon Sep 17 00:00:00 2001 From: Balaji Rao Date: Tue, 27 Jan 2009 19:23:12 +0530 Subject: pcf50633_charger: Enable periodic charging restart The battery charger state machine switches into charging mode when the battery voltage falls below 96% of a battery float voltage. But the voltage drop in Li-ion batteries is marginal(1~2 %) till about 80% of its capacity - which means, after a BATFULL, charging won't be restarted until 80%. This work_struct function restarts charging at regular intervals to make sure the battery doesn't discharge too much. Signed-off-by: Balaji Rao Cc: Andy Green Signed-off-by: Anton Vorontsov --- include/linux/mfd/pcf50633/core.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/pcf50633/core.h b/include/linux/mfd/pcf50633/core.h index 4455b212d75a..c8f51c3c0a72 100644 --- a/include/linux/mfd/pcf50633/core.h +++ b/include/linux/mfd/pcf50633/core.h @@ -29,6 +29,8 @@ struct pcf50633_platform_data { char **batteries; int num_batteries; + int charging_restart_interval; + /* Callbacks */ void (*probe_done)(struct pcf50633 *); void (*mbc_event_callback)(struct pcf50633 *, int); -- cgit v1.2.3 From cc52a29e6245acd9032fcfa0ffcab4cc612de986 Mon Sep 17 00:00:00 2001 From: Balaji Rao Date: Tue, 27 Jan 2009 19:22:55 +0530 Subject: pcf50633_charger: Remove unused mbc_set_status function The 'pcf50633_mbc_set_status' function is unused, so remove it. Signed-off-by: Balaji Rao Cc: Andy Green Signed-off-by: Anton Vorontsov --- include/linux/mfd/pcf50633/mbc.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mfd/pcf50633/mbc.h b/include/linux/mfd/pcf50633/mbc.h index 6e17619b773a..4119579acf2c 100644 --- a/include/linux/mfd/pcf50633/mbc.h +++ b/include/linux/mfd/pcf50633/mbc.h @@ -128,7 +128,6 @@ enum pcf50633_reg_mbcs3 { int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma); int pcf50633_mbc_get_status(struct pcf50633 *); -void pcf50633_mbc_set_status(struct pcf50633 *, int what, int status); #endif -- cgit v1.2.3 From 5bf2b994bfe11bfe86231050897b2d881ca544d9 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Sun, 18 Jan 2009 17:40:27 +0100 Subject: pda_power: Add optional OTG transceiver and voltage regulator support This patch allows machines to use an OTG transceiver driver instead of supplying a custom is_usb_online callback to check USB power. Also, in the case that the OTG transceiver handles charger control when connected to USB, a regulator named "ac_draw" can be supplied instead of the custom set_charge callback to control the charger when connected to AC. The check for (transceiver->state == OTG_STATE_B_PERIPHERAL) in otg_is_usb_online is probably too simple, I'm just using this with a peripheral only device and gpio_vbus + bq24022. I'm not sure which other OTG states can supply power. Signed-off-by: Philipp Zabel Signed-off-by: Anton Vorontsov --- include/linux/pda_power.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pda_power.h b/include/linux/pda_power.h index cb7d10f30763..d4cf7a2ceb3e 100644 --- a/include/linux/pda_power.h +++ b/include/linux/pda_power.h @@ -31,6 +31,8 @@ struct pda_power_pdata { unsigned int wait_for_status; /* msecs, default is 500 */ unsigned int wait_for_charger; /* msecs, default is 500 */ unsigned int polling_interval; /* msecs, default is 2000 */ + + unsigned long ac_max_uA; /* current to draw when on AC */ }; #endif /* __PDA_POWER_H__ */ -- cgit v1.2.3 From 7831d56b0a3544cbb6f82f76c34ca95e24d5b676 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 8 Apr 2009 20:13:16 +0100 Subject: tty: MAX3100 Thou shalt remember to use 'git add' or errors shall be visited on your downloads and there shall be wrath from on list and much gnashing of teeth. Thou shalt remember to use git status or there shall be catcalls and much embarrasment shall come to pass. Signed-off-by: Alan "I'm hiding" Cox Signed-off-by: Linus Torvalds --- include/linux/serial_max3100.h | 52 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 include/linux/serial_max3100.h (limited to 'include/linux') diff --git a/include/linux/serial_max3100.h b/include/linux/serial_max3100.h new file mode 100644 index 000000000000..4976befb6aeb --- /dev/null +++ b/include/linux/serial_max3100.h @@ -0,0 +1,52 @@ +/* + * + * Copyright (C) 2007 Christian Pellegrin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + + +#ifndef _LINUX_SERIAL_MAX3100_H +#define _LINUX_SERIAL_MAX3100_H 1 + + +/** + * struct plat_max3100 - MAX3100 SPI UART platform data + * @loopback: force MAX3100 in loopback + * @crystal: 1 for 3.6864 Mhz, 0 for 1.8432 + * @max3100_hw_suspend: MAX3100 has a shutdown pin. This is a hook + * called on suspend and resume to activate it. + * @poll_time: poll time for CTS signal in ms, 0 disables (so no hw + * flow ctrl is possible but you have less CPU usage) + * + * You should use this structure in your machine description to specify + * how the MAX3100 is connected. Example: + * + * static struct plat_max3100 max3100_plat_data = { + * .loopback = 0, + * .crystal = 0, + * .poll_time = 100, + * }; + * + * static struct spi_board_info spi_board_info[] = { + * { + * .modalias = "max3100", + * .platform_data = &max3100_plat_data, + * .irq = IRQ_EINT12, + * .max_speed_hz = 5*1000*1000, + * .chip_select = 0, + * }, + * }; + * + **/ +struct plat_max3100 { + int loopback; + int crystal; + void (*max3100_hw_suspend) (int suspend); + int poll_time; +}; + +#endif -- cgit v1.2.3