From 099f53cb50e45ef617a9f1d63ceec799e489418b Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 8 Apr 2009 14:28:37 -0700 Subject: async_tx: rename zero_sum to val 'zero_sum' does not properly describe the operation of generating parity and checking that it validates against an existing buffer. Change the name of the operation to 'val' (for 'validate'). This is in anticipation of the p+q case where it is a requirement to identify the target parity buffers separately from the source buffers, because the target parity buffers will not have corresponding pq coefficients. Reviewed-by: Andre Noll Acked-by: Maciej Sosnowski Signed-off-by: Dan Williams --- include/linux/async_tx.h | 2 +- include/linux/dmaengine.h | 8 ++++---- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/async_tx.h b/include/linux/async_tx.h index 5fc2ef8d97fa..513150d8c25b 100644 --- a/include/linux/async_tx.h +++ b/include/linux/async_tx.h @@ -117,7 +117,7 @@ async_xor(struct page *dest, struct page **src_list, unsigned int offset, dma_async_tx_callback cb_fn, void *cb_fn_param); struct dma_async_tx_descriptor * -async_xor_zero_sum(struct page *dest, struct page **src_list, +async_xor_val(struct page *dest, struct page **src_list, unsigned int offset, int src_cnt, size_t len, u32 *result, enum async_tx_flags flags, struct dma_async_tx_descriptor *depend_tx, diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 2e2aa3df170c..6768727d00d7 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -55,8 +55,8 @@ enum dma_transaction_type { DMA_PQ_XOR, DMA_DUAL_XOR, DMA_PQ_UPDATE, - DMA_ZERO_SUM, - DMA_PQ_ZERO_SUM, + DMA_XOR_VAL, + DMA_PQ_VAL, DMA_MEMSET, DMA_MEMCPY_CRC32C, DMA_INTERRUPT, @@ -214,7 +214,7 @@ struct dma_async_tx_descriptor { * @device_free_chan_resources: release DMA channel's resources * @device_prep_dma_memcpy: prepares a memcpy operation * @device_prep_dma_xor: prepares a xor operation - * @device_prep_dma_zero_sum: prepares a zero_sum operation + * @device_prep_dma_xor_val: prepares a xor validation operation * @device_prep_dma_memset: prepares a memset operation * @device_prep_dma_interrupt: prepares an end of chain interrupt operation * @device_prep_slave_sg: prepares a slave dma operation @@ -243,7 +243,7 @@ struct dma_device { struct dma_async_tx_descriptor *(*device_prep_dma_xor)( struct dma_chan *chan, dma_addr_t dest, dma_addr_t *src, unsigned int src_cnt, size_t len, unsigned long flags); - struct dma_async_tx_descriptor *(*device_prep_dma_zero_sum)( + struct dma_async_tx_descriptor *(*device_prep_dma_xor_val)( struct dma_chan *chan, dma_addr_t *src, unsigned int src_cnt, size_t len, u32 *result, unsigned long flags); struct dma_async_tx_descriptor *(*device_prep_dma_memset)( -- cgit v1.2.3 From 88ba2aa586c874681c072101287e15d40de7e6e2 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 9 Apr 2009 16:16:18 -0700 Subject: async_tx: kill ASYNC_TX_DEP_ACK flag In support of inter-channel chaining async_tx utilizes an ack flag to gate whether a dependent operation can be chained to another. While the flag is not set the chain can be considered open for appending. Setting the ack flag closes the chain and flags the descriptor for garbage collection. The ASYNC_TX_DEP_ACK flag essentially means "close the chain after adding this dependency". Since each operation can only have one child the api now implicitly sets the ack flag at dependency submission time. This removes an unnecessary management burden from clients of the api. [ Impact: clean up and enforce one dependency per operation ] Reviewed-by: Andre Noll Acked-by: Maciej Sosnowski Signed-off-by: Dan Williams --- include/linux/async_tx.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/async_tx.h b/include/linux/async_tx.h index 513150d8c25b..9f14cd540cd2 100644 --- a/include/linux/async_tx.h +++ b/include/linux/async_tx.h @@ -58,13 +58,11 @@ struct dma_chan_ref { * array. * @ASYNC_TX_ACK: immediately ack the descriptor, precludes setting up a * dependency chain - * @ASYNC_TX_DEP_ACK: ack the dependency descriptor. Useful for chaining. */ enum async_tx_flags { ASYNC_TX_XOR_ZERO_DST = (1 << 0), ASYNC_TX_XOR_DROP_DST = (1 << 1), - ASYNC_TX_ACK = (1 << 3), - ASYNC_TX_DEP_ACK = (1 << 4), + ASYNC_TX_ACK = (1 << 2), }; #ifdef CONFIG_DMA_ENGINE -- cgit v1.2.3 From a08abd8ca890a377521d65d493d174bebcaf694b Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 3 Jun 2009 11:43:59 -0700 Subject: async_tx: structify submission arguments, add scribble Prepare the api for the arrival of a new parameter, 'scribble'. This will allow callers to identify scratchpad memory for dma address or page address conversions. As this adds yet another parameter, take this opportunity to convert the common submission parameters (flags, dependency, callback, and callback argument) into an object that is passed by reference. Also, take this opportunity to fix up the kerneldoc and add notes about the relevant ASYNC_TX_* flags for each routine. [ Impact: moves api pass-by-value parameters to a pass-by-reference struct ] Signed-off-by: Andre Noll Acked-by: Maciej Sosnowski Signed-off-by: Dan Williams --- include/linux/async_tx.h | 84 +++++++++++++++++++++++++++++++----------------- 1 file changed, 54 insertions(+), 30 deletions(-) (limited to 'include/linux') diff --git a/include/linux/async_tx.h b/include/linux/async_tx.h index 9f14cd540cd2..00cfb637ddf2 100644 --- a/include/linux/async_tx.h +++ b/include/linux/async_tx.h @@ -65,6 +65,22 @@ enum async_tx_flags { ASYNC_TX_ACK = (1 << 2), }; +/** + * struct async_submit_ctl - async_tx submission/completion modifiers + * @flags: submission modifiers + * @depend_tx: parent dependency of the current operation being submitted + * @cb_fn: callback routine to run at operation completion + * @cb_param: parameter for the callback routine + * @scribble: caller provided space for dma/page address conversions + */ +struct async_submit_ctl { + enum async_tx_flags flags; + struct dma_async_tx_descriptor *depend_tx; + dma_async_tx_callback cb_fn; + void *cb_param; + void *scribble; +}; + #ifdef CONFIG_DMA_ENGINE #define async_tx_issue_pending_all dma_issue_pending_all #ifdef CONFIG_ARCH_HAS_ASYNC_TX_FIND_CHANNEL @@ -73,8 +89,8 @@ enum async_tx_flags { #define async_tx_find_channel(dep, type, dst, dst_count, src, src_count, len) \ __async_tx_find_channel(dep, type) struct dma_chan * -__async_tx_find_channel(struct dma_async_tx_descriptor *depend_tx, - enum dma_transaction_type tx_type); +__async_tx_find_channel(struct async_submit_ctl *submit, + enum dma_transaction_type tx_type); #endif /* CONFIG_ARCH_HAS_ASYNC_TX_FIND_CHANNEL */ #else static inline void async_tx_issue_pending_all(void) @@ -83,9 +99,10 @@ static inline void async_tx_issue_pending_all(void) } static inline struct dma_chan * -async_tx_find_channel(struct dma_async_tx_descriptor *depend_tx, - enum dma_transaction_type tx_type, struct page **dst, int dst_count, - struct page **src, int src_count, size_t len) +async_tx_find_channel(struct async_submit_ctl *submit, + enum dma_transaction_type tx_type, struct page **dst, + int dst_count, struct page **src, int src_count, + size_t len) { return NULL; } @@ -97,46 +114,53 @@ async_tx_find_channel(struct dma_async_tx_descriptor *depend_tx, * @cb_fn_param: parameter to pass to the callback routine */ static inline void -async_tx_sync_epilog(dma_async_tx_callback cb_fn, void *cb_fn_param) +async_tx_sync_epilog(struct async_submit_ctl *submit) +{ + if (submit->cb_fn) + submit->cb_fn(submit->cb_param); +} + +typedef union { + unsigned long addr; + struct page *page; + dma_addr_t dma; +} addr_conv_t; + +static inline void +init_async_submit(struct async_submit_ctl *args, enum async_tx_flags flags, + struct dma_async_tx_descriptor *tx, + dma_async_tx_callback cb_fn, void *cb_param, + addr_conv_t *scribble) { - if (cb_fn) - cb_fn(cb_fn_param); + args->flags = flags; + args->depend_tx = tx; + args->cb_fn = cb_fn; + args->cb_param = cb_param; + args->scribble = scribble; } -void -async_tx_submit(struct dma_chan *chan, struct dma_async_tx_descriptor *tx, - enum async_tx_flags flags, struct dma_async_tx_descriptor *depend_tx, - dma_async_tx_callback cb_fn, void *cb_fn_param); +void async_tx_submit(struct dma_chan *chan, struct dma_async_tx_descriptor *tx, + struct async_submit_ctl *submit); struct dma_async_tx_descriptor * async_xor(struct page *dest, struct page **src_list, unsigned int offset, - int src_cnt, size_t len, enum async_tx_flags flags, - struct dma_async_tx_descriptor *depend_tx, - dma_async_tx_callback cb_fn, void *cb_fn_param); + int src_cnt, size_t len, struct async_submit_ctl *submit); struct dma_async_tx_descriptor * -async_xor_val(struct page *dest, struct page **src_list, - unsigned int offset, int src_cnt, size_t len, - u32 *result, enum async_tx_flags flags, - struct dma_async_tx_descriptor *depend_tx, - dma_async_tx_callback cb_fn, void *cb_fn_param); +async_xor_val(struct page *dest, struct page **src_list, unsigned int offset, + int src_cnt, size_t len, u32 *result, + struct async_submit_ctl *submit); struct dma_async_tx_descriptor * async_memcpy(struct page *dest, struct page *src, unsigned int dest_offset, - unsigned int src_offset, size_t len, enum async_tx_flags flags, - struct dma_async_tx_descriptor *depend_tx, - dma_async_tx_callback cb_fn, void *cb_fn_param); + unsigned int src_offset, size_t len, + struct async_submit_ctl *submit); struct dma_async_tx_descriptor * async_memset(struct page *dest, int val, unsigned int offset, - size_t len, enum async_tx_flags flags, - struct dma_async_tx_descriptor *depend_tx, - dma_async_tx_callback cb_fn, void *cb_fn_param); + size_t len, struct async_submit_ctl *submit); -struct dma_async_tx_descriptor * -async_trigger_callback(enum async_tx_flags flags, - struct dma_async_tx_descriptor *depend_tx, - dma_async_tx_callback cb_fn, void *cb_fn_param); +struct dma_async_tx_descriptor *async_trigger_callback(struct async_submit_ctl *submit); void async_tx_quiesce(struct dma_async_tx_descriptor **tx); #endif /* _ASYNC_TX_H_ */ -- cgit v1.2.3 From a635f9dd83f3382577f4544a96df12356e951a40 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Fri, 12 Jun 2009 15:20:55 +0200 Subject: HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid//rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina --- include/linux/hid-debug.h | 32 +++++++++++++++++++------------- include/linux/hid.h | 4 ++++ 2 files changed, 23 insertions(+), 13 deletions(-) (limited to 'include/linux') diff --git a/include/linux/hid-debug.h b/include/linux/hid-debug.h index 50d568ec178a..516e12c33235 100644 --- a/include/linux/hid-debug.h +++ b/include/linux/hid-debug.h @@ -2,7 +2,7 @@ #define __HID_DEBUG_H /* - * Copyright (c) 2007 Jiri Kosina + * Copyright (c) 2007-2009 Jiri Kosina */ /* @@ -22,24 +22,30 @@ * */ -#ifdef CONFIG_HID_DEBUG +#ifdef CONFIG_DEBUG_FS void hid_dump_input(struct hid_usage *, __s32); -void hid_dump_device(struct hid_device *); -void hid_dump_field(struct hid_field *, int); -void hid_resolv_usage(unsigned); -void hid_resolv_event(__u8, __u16); +void hid_dump_device(struct hid_device *, struct seq_file *); +void hid_dump_field(struct hid_field *, int, struct seq_file *); +void hid_resolv_usage(unsigned, struct seq_file *); +void hid_debug_register(struct hid_device *, const char *); +void hid_debug_unregister(struct hid_device *); +void hid_debug_init(void); +void hid_debug_exit(void); #else -#define hid_dump_input(a,b) do { } while (0) -#define hid_dump_device(c) do { } while (0) -#define hid_dump_field(a,b) do { } while (0) -#define hid_resolv_usage(a) do { } while (0) -#define hid_resolv_event(a,b) do { } while (0) - -#endif /* CONFIG_HID_DEBUG */ +#define hid_dump_input(a,b) do { } while (0) +#define hid_dump_device(c) do { } while (0) +#define hid_dump_field(a,b) do { } while (0) +#define hid_resolv_usage(a) do { } while (0) +#define hid_resolv_event(a,b) do { } while (0) +#define hid_debug_register(a, b) do { } while (0) +#define hid_debug_unregister(a) do { } while (0) +#define hid_debug_init() do { } while (0) +#define hid_debug_exit() do { } while (0) +#endif #endif diff --git a/include/linux/hid.h b/include/linux/hid.h index a72876e43589..da09ab140ef1 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -451,6 +451,10 @@ struct hid_device { /* device report descriptor */ char phys[64]; /* Device physical location */ char uniq[64]; /* Device unique identifier (serial #) */ + /* debugfs */ + struct dentry *debug_dir; + struct dentry *debug_rdesc; + void *driver_data; /* temporary hid_ff handling (until moved to the drivers) */ -- cgit v1.2.3 From cd667ce24796700e1a0e6e7528efc61c96ff832e Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Fri, 12 Jun 2009 15:20:57 +0200 Subject: HID: use debugfs for events/reports dumping This is a followup patch to the one implemeting rdesc representation in debugfs rather than being dependent on compile-time CONFIG_HID_DEBUG setting. The API of the appropriate formatting functions is slightly modified -- if they are passed seq_file pointer, the one-shot output for 'rdesc' file mode is used, and therefore the message is formatted into the corresponding seq_file immediately. Otherwise the called function allocated a new buffer, formats the text into the buffer and returns the pointer to it, so that it can be queued into the ring-buffer of the processess blocked waiting on input on 'events' file in debugfs. 'debug' parameter to the 'hid' module is now used solely for the prupose of inetrnal driver state debugging (parser, transport, etc). Signed-off-by: Jiri Kosina --- include/linux/hid-debug.h | 18 ++++++++++++++++-- include/linux/hid.h | 26 ++++++++------------------ 2 files changed, 24 insertions(+), 20 deletions(-) (limited to 'include/linux') diff --git a/include/linux/hid-debug.h b/include/linux/hid-debug.h index 516e12c33235..ec08ac1ad687 100644 --- a/include/linux/hid-debug.h +++ b/include/linux/hid-debug.h @@ -24,14 +24,27 @@ #ifdef CONFIG_DEBUG_FS -void hid_dump_input(struct hid_usage *, __s32); +void hid_dump_input(struct hid_device *, struct hid_usage *, __s32); void hid_dump_device(struct hid_device *, struct seq_file *); void hid_dump_field(struct hid_field *, int, struct seq_file *); -void hid_resolv_usage(unsigned, struct seq_file *); +char *hid_resolv_usage(unsigned, struct seq_file *); void hid_debug_register(struct hid_device *, const char *); void hid_debug_unregister(struct hid_device *); void hid_debug_init(void); void hid_debug_exit(void); +void hid_debug_event(struct hid_device *, char *); + +#define HID_DEBUG_BUFSIZE 512 + +struct hid_debug_list { + char *hid_debug_buf; + int head; + int tail; + struct fasync_struct *fasync; + struct hid_device *hdev; + struct list_head node; + struct mutex read_mutex; +}; #else @@ -44,6 +57,7 @@ void hid_debug_exit(void); #define hid_debug_unregister(a) do { } while (0) #define hid_debug_init() do { } while (0) #define hid_debug_exit() do { } while (0) +#define hid_debug_event(a,b) do { } while (0) #endif diff --git a/include/linux/hid.h b/include/linux/hid.h index da09ab140ef1..60fa52913f89 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -451,10 +451,6 @@ struct hid_device { /* device report descriptor */ char phys[64]; /* Device physical location */ char uniq[64]; /* Device unique identifier (serial #) */ - /* debugfs */ - struct dentry *debug_dir; - struct dentry *debug_rdesc; - void *driver_data; /* temporary hid_ff handling (until moved to the drivers) */ @@ -468,6 +464,14 @@ struct hid_device { /* device report descriptor */ /* handler for raw output data, used by hidraw */ int (*hid_output_raw_report) (struct hid_device *, __u8 *, size_t); + + /* debugging support via debugfs */ + unsigned short debug; + struct dentry *debug_dir; + struct dentry *debug_rdesc; + struct dentry *debug_events; + struct list_head debug_list; + wait_queue_head_t debug_wait; }; static inline void *hid_get_drvdata(struct hid_device *hdev) @@ -625,9 +629,7 @@ struct hid_ll_driver { /* HID core API */ -#ifdef CONFIG_HID_DEBUG extern int hid_debug; -#endif extern int hid_add_device(struct hid_device *); extern void hid_destroy_device(struct hid_device *); @@ -783,21 +785,9 @@ int hid_pidff_init(struct hid_device *hid); #define hid_pidff_init NULL #endif -#ifdef CONFIG_HID_DEBUG #define dbg_hid(format, arg...) if (hid_debug) \ printk(KERN_DEBUG "%s: " format ,\ __FILE__ , ## arg) -#define dbg_hid_line(format, arg...) if (hid_debug) \ - printk(format, ## arg) -#else -static inline int __attribute__((format(printf, 1, 2))) -dbg_hid(const char *fmt, ...) -{ - return 0; -} -#define dbg_hid_line dbg_hid -#endif /* HID_DEBUG */ - #define err_hid(format, arg...) printk(KERN_ERR "%s: " format "\n" , \ __FILE__ , ## arg) #endif /* HID_FF */ -- cgit v1.2.3 From e74e396204bfcb67570ba4517b08f5918e69afea Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 30 Mar 2009 19:07:44 +0900 Subject: percpu: use dynamic percpu allocator as the default percpu allocator This patch makes most !CONFIG_HAVE_SETUP_PER_CPU_AREA archs use dynamic percpu allocator. The first chunk is allocated using embedding helper and 8k is reserved for modules. This ensures that the new allocator behaves almost identically to the original allocator as long as static percpu variables are concerned, so it shouldn't introduce much breakage. s390 and alpha use custom SHIFT_PERCPU_PTR() to work around addressing range limit the addressing model imposes. Unfortunately, this breaks if the address is specified using a variable, so for now, the two archs aren't converted. The following architectures are affected by this change. * sh * arm * cris * mips * sparc(32) * blackfin * avr32 * parisc (broken, under investigation) * m32r * powerpc(32) As this change makes the dynamic allocator the default one, CONFIG_HAVE_DYNAMIC_PER_CPU_AREA is replaced with its invert - CONFIG_HAVE_LEGACY_PER_CPU_AREA, which is added to yet-to-be converted archs. These archs implement their own setup_per_cpu_areas() and the conversion is not trivial. * powerpc(64) * sparc(64) * ia64 * alpha * s390 Boot and batch alloc/free tests on x86_32 with debug code (x86_32 doesn't use default first chunk initialization). Compile tested on sparc(32), powerpc(32), arm and alpha. Kyle McMartin reported that this change breaks parisc. The problem is still under investigation and he is okay with pushing this patch forward and fixing parisc later. [ Impact: use dynamic allocator for most archs w/o custom percpu setup ] Signed-off-by: Tejun Heo Acked-by: Rusty Russell Acked-by: David S. Miller Acked-by: Benjamin Herrenschmidt Acked-by: Martin Schwidefsky Reviewed-by: Christoph Lameter Cc: Paul Mundt Cc: Russell King Cc: Mikael Starvik Cc: Ralf Baechle Cc: Bryan Wu Cc: Kyle McMartin Cc: Matthew Wilcox Cc: Grant Grundler Cc: Hirokazu Takata Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Heiko Carstens Cc: Ingo Molnar --- include/linux/percpu.h | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/percpu.h b/include/linux/percpu.h index 26fd9d12f050..e5000343dd61 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -34,7 +34,7 @@ #ifdef CONFIG_SMP -#ifdef CONFIG_HAVE_DYNAMIC_PER_CPU_AREA +#ifndef CONFIG_HAVE_LEGACY_PER_CPU_AREA /* minimum unit size, also is the maximum supported allocation size */ #define PCPU_MIN_UNIT_SIZE PFN_ALIGN(64 << 10) @@ -80,7 +80,7 @@ extern ssize_t __init pcpu_embed_first_chunk( extern void *__alloc_reserved_percpu(size_t size, size_t align); -#else /* CONFIG_HAVE_DYNAMIC_PER_CPU_AREA */ +#else /* CONFIG_HAVE_LEGACY_PER_CPU_AREA */ struct percpu_data { void *ptrs[1]; @@ -99,11 +99,15 @@ struct percpu_data { (__typeof__(ptr))__p->ptrs[(cpu)]; \ }) -#endif /* CONFIG_HAVE_DYNAMIC_PER_CPU_AREA */ +#endif /* CONFIG_HAVE_LEGACY_PER_CPU_AREA */ extern void *__alloc_percpu(size_t size, size_t align); extern void free_percpu(void *__pdata); +#ifndef CONFIG_HAVE_SETUP_PER_CPU_AREA +extern void __init setup_per_cpu_areas(void); +#endif + #else /* CONFIG_SMP */ #define per_cpu_ptr(ptr, cpu) ({ (void)(cpu); (ptr); }) @@ -124,6 +128,8 @@ static inline void free_percpu(void *p) kfree(p); } +static inline void __init setup_per_cpu_areas(void) { } + #endif /* CONFIG_SMP */ #define alloc_percpu(type) (type *)__alloc_percpu(sizeof(type), \ -- cgit v1.2.3 From 7c756e6e19e71f0327760d8955f7077118ebb2b1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 24 Jun 2009 15:13:50 +0900 Subject: percpu: implement optional weak percpu definitions Some archs (alpha and s390) need to use weak definitions for percpu variables in modules so that the compiler generates external references for them. This patch implements weak percpu definitions which arch can enable by defining ARCH_NEEDS_WEAK_PER_CPU in arch percpu header file. This weak definition adds the following two restrictions on percpu variable definitions. 1. percpu symbols must be unique whether static or not 2. percpu variables can't be defined inside a function To ensure that these restrictions are observed in generic code, config option DEBUG_FORCE_WEAK_PER_CPU enables weak percpu definitions for all cases. This patch is inspired by Ivan Kokshaysky's alpha percpu patch. [ Impact: stricter rules for percpu variables, one more debug config option ] Signed-off-by: Tejun Heo Cc: Ingo Molnar Cc: David Howells Cc: Ivan Kokshaysky --- include/linux/percpu-defs.h | 65 ++++++++++++++++++++++++++++++++++++++------- 1 file changed, 56 insertions(+), 9 deletions(-) (limited to 'include/linux') diff --git a/include/linux/percpu-defs.h b/include/linux/percpu-defs.h index 8f921d74f49f..cf32838ad0fa 100644 --- a/include/linux/percpu-defs.h +++ b/include/linux/percpu-defs.h @@ -10,21 +10,68 @@ /* * Base implementations of per-CPU variable declarations and definitions, where * the section in which the variable is to be placed is provided by the - * 'section' argument. This may be used to affect the parameters governing the + * 'sec' argument. This may be used to affect the parameters governing the * variable's storage. * * NOTE! The sections for the DECLARE and for the DEFINE must match, lest * linkage errors occur due the compiler generating the wrong code to access * that section. */ -#define DECLARE_PER_CPU_SECTION(type, name, section) \ - extern \ - __attribute__((__section__(PER_CPU_BASE_SECTION section))) \ - PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name - -#define DEFINE_PER_CPU_SECTION(type, name, section) \ - __attribute__((__section__(PER_CPU_BASE_SECTION section))) \ - PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name +#define __PCPU_ATTRS(sec) \ + __attribute__((section(PER_CPU_BASE_SECTION sec))) \ + PER_CPU_ATTRIBUTES + +#define __PCPU_DUMMY_ATTRS \ + __attribute__((section(".discard"), unused)) + +/* + * s390 and alpha modules require percpu variables to be defined as + * weak to force the compiler to generate GOT based external + * references for them. This is necessary because percpu sections + * will be located outside of the usually addressable area. + * + * This definition puts the following two extra restrictions when + * defining percpu variables. + * + * 1. The symbol must be globally unique, even the static ones. + * 2. Static percpu variables cannot be defined inside a function. + * + * Archs which need weak percpu definitions should define + * ARCH_NEEDS_WEAK_PER_CPU in asm/percpu.h when necessary. + * + * To ensure that the generic code observes the above two + * restrictions, if CONFIG_DEBUG_FORCE_WEAK_PER_CPU is set weak + * definition is used for all cases. + */ +#if defined(ARCH_NEEDS_WEAK_PER_CPU) || defined(CONFIG_DEBUG_FORCE_WEAK_PER_CPU) +/* + * __pcpu_scope_* dummy variable is used to enforce scope. It + * receives the static modifier when it's used in front of + * DEFINE_PER_CPU() and will trigger build failure if + * DECLARE_PER_CPU() is used for the same variable. + * + * __pcpu_unique_* dummy variable is used to enforce symbol uniqueness + * such that hidden weak symbol collision, which will cause unrelated + * variables to share the same address, can be detected during build. + */ +#define DECLARE_PER_CPU_SECTION(type, name, sec) \ + extern __PCPU_DUMMY_ATTRS char __pcpu_scope_##name; \ + extern __PCPU_ATTRS(sec) __weak __typeof__(type) per_cpu__##name + +#define DEFINE_PER_CPU_SECTION(type, name, sec) \ + __PCPU_DUMMY_ATTRS char __pcpu_scope_##name; \ + __PCPU_DUMMY_ATTRS char __pcpu_unique_##name; \ + __PCPU_ATTRS(sec) __weak __typeof__(type) per_cpu__##name +#else +/* + * Normal declaration and definition macros. + */ +#define DECLARE_PER_CPU_SECTION(type, name, sec) \ + extern __PCPU_ATTRS(sec) __typeof__(type) per_cpu__##name + +#define DEFINE_PER_CPU_SECTION(type, name, sec) \ + __PCPU_ATTRS(sec) __typeof__(type) per_cpu__##name +#endif /* * Variant on the per-CPU variable declaration/definition theme used for -- cgit v1.2.3 From 38b7f49a0654cb52cac61c6455807248eee3059d Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Fri, 26 Jun 2009 10:48:34 +0200 Subject: HID: fix debugfs build with !CONFIG_DEBUG_FS Fix the debug function prototypes to be correct even in the !CONFIG_DEBUG_FS case. Reported-by: Stephen Rothwell Signed-off-by: Jiri Kosina --- include/linux/hid-debug.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/hid-debug.h b/include/linux/hid-debug.h index ec08ac1ad687..53744fa1c8b7 100644 --- a/include/linux/hid-debug.h +++ b/include/linux/hid-debug.h @@ -22,6 +22,8 @@ * */ +#define HID_DEBUG_BUFSIZE 512 + #ifdef CONFIG_DEBUG_FS void hid_dump_input(struct hid_device *, struct hid_usage *, __s32); @@ -34,7 +36,6 @@ void hid_debug_init(void); void hid_debug_exit(void); void hid_debug_event(struct hid_device *, char *); -#define HID_DEBUG_BUFSIZE 512 struct hid_debug_list { char *hid_debug_buf; @@ -48,11 +49,10 @@ struct hid_debug_list { #else -#define hid_dump_input(a,b) do { } while (0) -#define hid_dump_device(c) do { } while (0) -#define hid_dump_field(a,b) do { } while (0) -#define hid_resolv_usage(a) do { } while (0) -#define hid_resolv_event(a,b) do { } while (0) +#define hid_dump_input(a,b,c) do { } while (0) +#define hid_dump_device(a,b) do { } while (0) +#define hid_dump_field(a,b,c) do { } while (0) +#define hid_resolv_usage(a,b) do { } while (0) #define hid_debug_register(a, b) do { } while (0) #define hid_debug_unregister(a) do { } while (0) #define hid_debug_init() do { } while (0) -- cgit v1.2.3 From 1a8dd307cc0a2119be4e578c517795464e6dabba Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 29 Jun 2009 17:45:39 +0900 Subject: percpu: use __weak only in the definition of weak percpu variables __weak is necessary only for definition and might even not work in declaration. Drop it from declaration. This change was suggested by Ivan Kokshaysky. Signed-off-by: Tejun Heo Acked-by: Ivan Kokshaysky --- include/linux/percpu-defs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/percpu-defs.h b/include/linux/percpu-defs.h index cf32838ad0fa..9b7a53cc16eb 100644 --- a/include/linux/percpu-defs.h +++ b/include/linux/percpu-defs.h @@ -56,7 +56,7 @@ */ #define DECLARE_PER_CPU_SECTION(type, name, sec) \ extern __PCPU_DUMMY_ATTRS char __pcpu_scope_##name; \ - extern __PCPU_ATTRS(sec) __weak __typeof__(type) per_cpu__##name + extern __PCPU_ATTRS(sec) __typeof__(type) per_cpu__##name #define DEFINE_PER_CPU_SECTION(type, name, sec) \ __PCPU_DUMMY_ATTRS char __pcpu_scope_##name; \ -- cgit v1.2.3 From b294a290d24d1196d68399cc3a9b8c50bfb55abd Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Tue, 30 Jun 2009 02:13:01 -0400 Subject: Revert "power: remove POWER_SUPPLY_PROP_CAPACITY_LEVEL" This reverts commit 8efe444038a205e79b38b7ad03878824901849a8 and 4cbc76eadf56399cd11fb736b33c53aec9caab8c. Richard@laptop.org was apparently using CAPACITY_LEVEL for debugging battery/EC problems, and was upset that it was removed. This readds it. Conflicts: Documentation/power_supply_class.txt Signed-off-by: Andres Salomon Signed-off-by: Anton Vorontsov --- include/linux/power_supply.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index 594c494ac3f0..0ab6aa171241 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -58,6 +58,15 @@ enum { POWER_SUPPLY_TECHNOLOGY_LiMn, }; +enum { + POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN = 0, + POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL, + POWER_SUPPLY_CAPACITY_LEVEL_LOW, + POWER_SUPPLY_CAPACITY_LEVEL_NORMAL, + POWER_SUPPLY_CAPACITY_LEVEL_HIGH, + POWER_SUPPLY_CAPACITY_LEVEL_FULL, +}; + enum power_supply_property { /* Properties of type `int' */ POWER_SUPPLY_PROP_STATUS = 0, @@ -89,6 +98,7 @@ enum power_supply_property { POWER_SUPPLY_PROP_ENERGY_NOW, POWER_SUPPLY_PROP_ENERGY_AVG, POWER_SUPPLY_PROP_CAPACITY, /* in percents! */ + POWER_SUPPLY_PROP_CAPACITY_LEVEL, POWER_SUPPLY_PROP_TEMP, POWER_SUPPLY_PROP_TEMP_AMBIENT, POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, -- cgit v1.2.3 From ee8076ed3e1cdd0cd1e61318386932669c90b92f Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Thu, 2 Jul 2009 09:45:18 -0400 Subject: power_supply: Add a charge_type property, and use it for olpc driver This adds a new sysfs file called 'charge_type' which displays the type of charging (unknown, n/a, trickle charge, or fast charging). This allows things like battery diagnostics to determine what the battery/EC is doing without resorting to changing the 'status' sysfs output. Signed-off-by: Andres Salomon Acked-by: Mark Brown Signed-off-by: Anton Vorontsov --- include/linux/power_supply.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index 0ab6aa171241..4c7c6fc35487 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -38,6 +38,13 @@ enum { POWER_SUPPLY_STATUS_FULL, }; +enum { + POWER_SUPPLY_CHARGE_TYPE_UNKNOWN = 0, + POWER_SUPPLY_CHARGE_TYPE_NONE, + POWER_SUPPLY_CHARGE_TYPE_TRICKLE, + POWER_SUPPLY_CHARGE_TYPE_FAST, +}; + enum { POWER_SUPPLY_HEALTH_UNKNOWN = 0, POWER_SUPPLY_HEALTH_GOOD, @@ -70,6 +77,7 @@ enum { enum power_supply_property { /* Properties of type `int' */ POWER_SUPPLY_PROP_STATUS = 0, + POWER_SUPPLY_PROP_CHARGE_TYPE, POWER_SUPPLY_PROP_HEALTH, POWER_SUPPLY_PROP_PRESENT, POWER_SUPPLY_PROP_ONLINE, -- cgit v1.2.3 From 788e5abc5441e9046dd91c995c6f1f75bbd144bf Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 4 Jul 2009 08:10:58 +0900 Subject: percpu: drop @unit_size from embed first chunk allocator The only extra feature @unit_size provides is making dead space at the end of the first chunk which doesn't have any valid usecase. Drop the parameter. This will increase consistency with generalized 4k allocator. James Bottomley spotted missing conversion for the default setup_per_cpu_areas() which caused build breakage on all arcsh which use it. [ Impact: drop unused code path ] Signed-off-by: Tejun Heo Cc: James Bottomley Cc: Ingo Molnar --- include/linux/percpu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/percpu.h b/include/linux/percpu.h index e5000343dd61..83bff053bd1c 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -69,7 +69,7 @@ extern size_t __init pcpu_setup_first_chunk(pcpu_get_page_fn_t get_page_fn, extern ssize_t __init pcpu_embed_first_chunk( size_t static_size, size_t reserved_size, - ssize_t dyn_size, ssize_t unit_size); + ssize_t dyn_size); /* * Use this to get to a cpu's version of the per-cpu object -- cgit v1.2.3 From d4b95f80399471e4bce5e992700ff7f06ef91f6a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 4 Jul 2009 08:10:59 +0900 Subject: x86,percpu: generalize 4k first chunk allocator Generalize and move x86 setup_pcpu_4k() into pcpu_4k_first_chunk(). setup_pcpu_4k() now is a simple wrapper around the generalized version. Other than taking size parameters and using arch supplied callbacks to allocate/free memory, pcpu_4k_first_chunk() is identical to the original implementation. This simplifies arch code and will help converting more archs to dynamic percpu allocator. While at it, s/pcpu_populate_pte_fn_t/pcpu_fc_populate_pte_fn_t/ for consistency. [ Impact: code reorganization and generalization ] Signed-off-by: Tejun Heo Cc: Ingo Molnar --- include/linux/percpu.h | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/percpu.h b/include/linux/percpu.h index 83bff053bd1c..41b5bfab4195 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -59,18 +59,26 @@ extern void *pcpu_base_addr; typedef struct page * (*pcpu_get_page_fn_t)(unsigned int cpu, int pageno); -typedef void (*pcpu_populate_pte_fn_t)(unsigned long addr); +typedef void * (*pcpu_fc_alloc_fn_t)(unsigned int cpu, size_t size); +typedef void (*pcpu_fc_free_fn_t)(void *ptr, size_t size); +typedef void (*pcpu_fc_populate_pte_fn_t)(unsigned long addr); extern size_t __init pcpu_setup_first_chunk(pcpu_get_page_fn_t get_page_fn, size_t static_size, size_t reserved_size, ssize_t dyn_size, ssize_t unit_size, void *base_addr, - pcpu_populate_pte_fn_t populate_pte_fn); + pcpu_fc_populate_pte_fn_t populate_pte_fn); extern ssize_t __init pcpu_embed_first_chunk( size_t static_size, size_t reserved_size, ssize_t dyn_size); +extern ssize_t __init pcpu_4k_first_chunk( + size_t static_size, size_t reserved_size, + pcpu_fc_alloc_fn_t alloc_fn, + pcpu_fc_free_fn_t free_fn, + pcpu_fc_populate_pte_fn_t populate_pte_fn); + /* * Use this to get to a cpu's version of the per-cpu object * dynamically allocated. Non-atomic access to the current CPU's -- cgit v1.2.3 From 8c4bfc6e8801616ab2e01c38140b2159b388d2ff Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 4 Jul 2009 08:10:59 +0900 Subject: x86,percpu: generalize lpage first chunk allocator Generalize and move x86 setup_pcpu_lpage() into pcpu_lpage_first_chunk(). setup_pcpu_lpage() now is a simple wrapper around the generalized version. Other than taking size parameters and using arch supplied callbacks to allocate/free/map memory, pcpu_lpage_first_chunk() is identical to the original implementation. This simplifies arch code and will help converting more archs to dynamic percpu allocator. While at it, factor out pcpu_calc_fc_sizes() which is common to pcpu_embed_first_chunk() and pcpu_lpage_first_chunk(). [ Impact: code reorganization and generalization ] Signed-off-by: Tejun Heo Cc: Ingo Molnar --- include/linux/percpu.h | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'include/linux') diff --git a/include/linux/percpu.h b/include/linux/percpu.h index 41b5bfab4195..9f6bfd7d4b92 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -62,6 +62,7 @@ typedef struct page * (*pcpu_get_page_fn_t)(unsigned int cpu, int pageno); typedef void * (*pcpu_fc_alloc_fn_t)(unsigned int cpu, size_t size); typedef void (*pcpu_fc_free_fn_t)(void *ptr, size_t size); typedef void (*pcpu_fc_populate_pte_fn_t)(unsigned long addr); +typedef void (*pcpu_fc_map_fn_t)(void *ptr, size_t size, void *addr); extern size_t __init pcpu_setup_first_chunk(pcpu_get_page_fn_t get_page_fn, size_t static_size, size_t reserved_size, @@ -79,6 +80,32 @@ extern ssize_t __init pcpu_4k_first_chunk( pcpu_fc_free_fn_t free_fn, pcpu_fc_populate_pte_fn_t populate_pte_fn); +#ifdef CONFIG_NEED_MULTIPLE_NODES +extern ssize_t __init pcpu_lpage_first_chunk( + size_t static_size, size_t reserved_size, + ssize_t dyn_size, size_t lpage_size, + pcpu_fc_alloc_fn_t alloc_fn, + pcpu_fc_free_fn_t free_fn, + pcpu_fc_map_fn_t map_fn); + +extern void *pcpu_lpage_remapped(void *kaddr); +#else +static inline ssize_t __init pcpu_lpage_first_chunk( + size_t static_size, size_t reserved_size, + ssize_t dyn_size, size_t lpage_size, + pcpu_fc_alloc_fn_t alloc_fn, + pcpu_fc_free_fn_t free_fn, + pcpu_fc_map_fn_t map_fn) +{ + return -EINVAL; +} + +static inline void *pcpu_lpage_remapped(void *kaddr) +{ + return NULL; +} +#endif + /* * Use this to get to a cpu's version of the per-cpu object * dynamically allocated. Non-atomic access to the current CPU's -- cgit v1.2.3 From 38a6be525460f52ac6f2de1c3f73c5615a8853cd Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 4 Jul 2009 08:10:59 +0900 Subject: percpu: simplify pcpu_setup_first_chunk() Now that all first chunk allocator helpers allocate and map the first chunk themselves, there's no need to have optional default alloc/map in pcpu_setup_first_chunk(). Drop @populate_pte_fn and only leave @dyn_size optional and make all other params mandatory. This makes it much easier to follow what pcpu_setup_first_chunk() is doing and what actual differences tweaking each parameter results in. [ Impact: drop unused code path ] Signed-off-by: Tejun Heo Cc: Ingo Molnar --- include/linux/percpu.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/percpu.h b/include/linux/percpu.h index 9f6bfd7d4b92..ec64357e1762 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -66,9 +66,8 @@ typedef void (*pcpu_fc_map_fn_t)(void *ptr, size_t size, void *addr); extern size_t __init pcpu_setup_first_chunk(pcpu_get_page_fn_t get_page_fn, size_t static_size, size_t reserved_size, - ssize_t dyn_size, ssize_t unit_size, - void *base_addr, - pcpu_fc_populate_pte_fn_t populate_pte_fn); + ssize_t dyn_size, size_t unit_size, + void *base_addr); extern ssize_t __init pcpu_embed_first_chunk( size_t static_size, size_t reserved_size, -- cgit v1.2.3 From ce3141a277ff6cc37e51008b8888dc2cb7456ef1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 4 Jul 2009 08:11:00 +0900 Subject: percpu: drop pcpu_chunk->page[] percpu core doesn't need to tack all the allocated pages. It needs to know whether certain pages are populated and a way to reverse map address to page when freeing. This patch drops pcpu_chunk->page[] and use populated bitmap and vmalloc_to_page() lookup instead. Using vmalloc_to_page() exclusively is also possible but complicates first chunk handling, inflates cache footprint and prevents non-standard memory allocation for percpu memory. pcpu_chunk->page[] was used to track each page's allocation and allowed asymmetric population which happens during failure path; however, with single bitmap for all units, this is no longer possible. Bite the bullet and rewrite (de)populate functions so that things are done in clearly separated steps such that asymmetric population doesn't happen. This makes the (de)population process much more modular and will also ease implementing non-standard memory usage in the future (e.g. large pages). This makes @get_page_fn parameter to pcpu_setup_first_chunk() unnecessary. The parameter is dropped and all first chunk helpers are updated accordingly. Please note that despite the volume most changes to first chunk helpers are symbol renames for variables which don't need to be referenced outside of the helper anymore. This change reduces memory usage and cache footprint of pcpu_chunk. Now only #unit_pages bits are necessary per chunk. [ Impact: reduced memory usage and cache footprint for bookkeeping ] Signed-off-by: Tejun Heo Cc: Ingo Molnar Cc: David Miller --- include/linux/percpu.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/percpu.h b/include/linux/percpu.h index ec64357e1762..63c8b7a23e66 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -58,13 +58,12 @@ extern void *pcpu_base_addr; -typedef struct page * (*pcpu_get_page_fn_t)(unsigned int cpu, int pageno); typedef void * (*pcpu_fc_alloc_fn_t)(unsigned int cpu, size_t size); typedef void (*pcpu_fc_free_fn_t)(void *ptr, size_t size); typedef void (*pcpu_fc_populate_pte_fn_t)(unsigned long addr); typedef void (*pcpu_fc_map_fn_t)(void *ptr, size_t size, void *addr); -extern size_t __init pcpu_setup_first_chunk(pcpu_get_page_fn_t get_page_fn, +extern size_t __init pcpu_setup_first_chunk( size_t static_size, size_t reserved_size, ssize_t dyn_size, size_t unit_size, void *base_addr); -- cgit v1.2.3 From 2f39e637ea240efb74cf807d31c93a71a0b89174 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 4 Jul 2009 08:11:00 +0900 Subject: percpu: allow non-linear / sparse cpu -> unit mapping Currently cpu and unit are always identity mapped. To allow more efficient large page support on NUMA and lazy allocation for possible but offline cpus, cpu -> unit mapping needs to be non-linear and/or sparse. This can be easily implemented by adding a cpu -> unit mapping array and using it whenever looking up the matching unit for a cpu. The only unusal conversion is in pcpu_chunk_addr_search(). The passed in address is unit0 based and unit0 might not be in use so it needs to be converted to address of an in-use unit. This is easily done by adding the unit offset for the current processor. [ Impact: allows non-linear/sparse cpu -> unit mapping, no visible change yet ] Signed-off-by: Tejun Heo Cc: Ingo Molnar Cc: David Miller --- include/linux/percpu.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/percpu.h b/include/linux/percpu.h index 63c8b7a23e66..1e0e8878dc2a 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -57,6 +57,7 @@ #endif extern void *pcpu_base_addr; +extern const int *pcpu_unit_map; typedef void * (*pcpu_fc_alloc_fn_t)(unsigned int cpu, size_t size); typedef void (*pcpu_fc_free_fn_t)(void *ptr, size_t size); @@ -66,7 +67,7 @@ typedef void (*pcpu_fc_map_fn_t)(void *ptr, size_t size, void *addr); extern size_t __init pcpu_setup_first_chunk( size_t static_size, size_t reserved_size, ssize_t dyn_size, size_t unit_size, - void *base_addr); + void *base_addr, const int *unit_map); extern ssize_t __init pcpu_embed_first_chunk( size_t static_size, size_t reserved_size, -- cgit v1.2.3 From a530b7958612bafe2027e21359083dba84f0b3b4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 4 Jul 2009 08:11:00 +0900 Subject: percpu: teach large page allocator about NUMA Large page first chunk allocator is primarily used for NUMA machines; however, its NUMA handling is extremely simplistic. Regardless of their proximity, each cpu is put into separate large page just to return most of the allocated space back wasting large amount of vmalloc space and increasing cache footprint. This patch teachs NUMA details to large page allocator. Given processor proximity information, pcpu_lpage_build_unit_map() will find fitting cpu -> unit mapping in which cpus in LOCAL_DISTANCE share the same large page and not too much virtual address space is wasted. This greatly reduces the unit and thus chunk size and wastes much less address space for the first chunk. For example, on 4/4 NUMA machine, the original code occupied 16MB of virtual space for the first chunk while the new code only uses 4MB - one 2MB page for each node. [ Impact: much better space efficiency on NUMA machines ] Signed-off-by: Tejun Heo Cc: Ingo Molnar Cc: Jan Beulich Cc: Andi Kleen Cc: David Miller --- include/linux/percpu.h | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/percpu.h b/include/linux/percpu.h index 1e0e8878dc2a..8ce91af4aa19 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -62,6 +62,7 @@ extern const int *pcpu_unit_map; typedef void * (*pcpu_fc_alloc_fn_t)(unsigned int cpu, size_t size); typedef void (*pcpu_fc_free_fn_t)(void *ptr, size_t size); typedef void (*pcpu_fc_populate_pte_fn_t)(unsigned long addr); +typedef int (pcpu_fc_cpu_distance_fn_t)(unsigned int from, unsigned int to); typedef void (*pcpu_fc_map_fn_t)(void *ptr, size_t size, void *addr); extern size_t __init pcpu_setup_first_chunk( @@ -80,18 +81,37 @@ extern ssize_t __init pcpu_4k_first_chunk( pcpu_fc_populate_pte_fn_t populate_pte_fn); #ifdef CONFIG_NEED_MULTIPLE_NODES +extern int __init pcpu_lpage_build_unit_map( + size_t static_size, size_t reserved_size, + ssize_t *dyn_sizep, size_t *unit_sizep, + size_t lpage_size, int *unit_map, + pcpu_fc_cpu_distance_fn_t cpu_distance_fn); + extern ssize_t __init pcpu_lpage_first_chunk( size_t static_size, size_t reserved_size, - ssize_t dyn_size, size_t lpage_size, + size_t dyn_size, size_t unit_size, + size_t lpage_size, const int *unit_map, + int nr_units, pcpu_fc_alloc_fn_t alloc_fn, pcpu_fc_free_fn_t free_fn, pcpu_fc_map_fn_t map_fn); extern void *pcpu_lpage_remapped(void *kaddr); #else +static inline int pcpu_lpage_build_unit_map( + size_t static_size, size_t reserved_size, + ssize_t *dyn_sizep, size_t *unit_sizep, + size_t lpage_size, int *unit_map, + pcpu_fc_cpu_distance_fn_t cpu_distance_fn) +{ + return -EINVAL; +} + static inline ssize_t __init pcpu_lpage_first_chunk( size_t static_size, size_t reserved_size, - ssize_t dyn_size, size_t lpage_size, + size_t dyn_size, size_t unit_size, + size_t lpage_size, const int *unit_map, + int nr_units, pcpu_fc_alloc_fn_t alloc_fn, pcpu_fc_free_fn_t free_fn, pcpu_fc_map_fn_t map_fn) -- cgit v1.2.3 From 0e8635a8e1f2d4a9e1bfc6c3b21419a5921e674f Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Sat, 20 Jun 2009 00:53:25 +0000 Subject: net: remove NET_RX_BAD and NET_RX_CN* defines almost no users in the tree; and the few that use them treat them like NET_RX_DROP. Signed-off-by: Florian Westphal Signed-off-by: David S. Miller --- include/linux/netdevice.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index d4a4d9867794..9f25ab2899de 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -72,10 +72,6 @@ struct wireless_dev; /* Backlog congestion levels */ #define NET_RX_SUCCESS 0 /* keep 'em coming, baby */ #define NET_RX_DROP 1 /* packet dropped */ -#define NET_RX_CN_LOW 2 /* storm alert, just in case */ -#define NET_RX_CN_MOD 3 /* Storm on its way! */ -#define NET_RX_CN_HIGH 4 /* The storm is here */ -#define NET_RX_BAD 5 /* packet dropped due to kernel error */ /* NET_XMIT_CN is special. It does not guarantee that this packet is lost. It * indicates that the device will soon be dropping packets, or already drops -- cgit v1.2.3 From 6650613d3387dcc30685e2781818ea7d0f840027 Mon Sep 17 00:00:00 2001 From: "oscar.medina@motorola.com" Date: Tue, 30 Jun 2009 03:25:39 +0000 Subject: tipc: Add socket options to get number of queued messages This patch allows a TIPC application to determine the number of messages currently waiting in a socket's receive queue (TIPC_SOCK_RECVQ_DEPTH) or in all TIPC socket receive queues (TIPC_NODE_RECVQ_DEPTH). Signed-off-by: Oscar Medina Signed-off-by: Allan Stephens Signed-off-by: David S. Miller --- include/linux/tipc.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/tipc.h b/include/linux/tipc.h index bea469455a0c..3d92396639de 100644 --- a/include/linux/tipc.h +++ b/include/linux/tipc.h @@ -209,5 +209,7 @@ struct sockaddr_tipc { #define TIPC_SRC_DROPPABLE 128 /* Default: 0 (resend congested msg) */ #define TIPC_DEST_DROPPABLE 129 /* Default: based on socket type */ #define TIPC_CONN_TIMEOUT 130 /* Default: 8000 (ms) */ +#define TIPC_NODE_RECVQ_DEPTH 131 /* Default: none (read only) */ +#define TIPC_SOCK_RECVQ_DEPTH 132 /* Default: none (read only) */ #endif -- cgit v1.2.3 From 7a6d3c8b3049d07123628f2bf57127bba2cc878f Mon Sep 17 00:00:00 2001 From: Csaba Henk Date: Wed, 1 Jul 2009 17:28:41 -0700 Subject: fuse: make the number of max background requests and congestion threshold tunable The practical values for these limits depend on the design of the filesystem server so let userspace set them at initialization time. Signed-off-by: Csaba Henk Signed-off-by: Miklos Szeredi --- include/linux/fuse.h | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fuse.h b/include/linux/fuse.h index cf593bf9fd32..b3700f0ac268 100644 --- a/include/linux/fuse.h +++ b/include/linux/fuse.h @@ -30,6 +30,10 @@ * - add umask flag to input argument of open, mknod and mkdir * - add notification messages for invalidation of inodes and * directory entries + * + * 7.13 + * - make max number of background requests and congestion threshold + * tunables */ #ifndef _LINUX_FUSE_H @@ -41,7 +45,7 @@ #define FUSE_KERNEL_VERSION 7 /** Minor version number of this interface */ -#define FUSE_KERNEL_MINOR_VERSION 12 +#define FUSE_KERNEL_MINOR_VERSION 13 /** The node ID of the root inode */ #define FUSE_ROOT_ID 1 @@ -427,7 +431,8 @@ struct fuse_init_out { __u32 minor; __u32 max_readahead; __u32 flags; - __u32 unused; + __u16 max_background; + __u16 congestion_threshold; __u32 max_write; }; -- cgit v1.2.3 From 37d217f029a56a6d385f99773fb27dfcb51f9a46 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 8 Jul 2009 18:17:58 +0200 Subject: fuse: document protocol version negotiation Clarify how the protocol version should be negotiated between kernel and userspace. Notably libfuse didn't correctly handle the case when the supported major versions didn't match. Signed-off-by: Miklos Szeredi --- include/linux/fuse.h | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'include/linux') diff --git a/include/linux/fuse.h b/include/linux/fuse.h index b3700f0ac268..3e2925a34bf0 100644 --- a/include/linux/fuse.h +++ b/include/linux/fuse.h @@ -41,6 +41,26 @@ #include +/* + * Version negotiation: + * + * Both the kernel and userspace send the version they support in the + * INIT request and reply respectively. + * + * If the major versions match then both shall use the smallest + * of the two minor versions for communication. + * + * If the kernel supports a larger major version, then userspace shall + * reply with the major version it supports, ignore the rest of the + * INIT message and expect a new INIT message from the kernel with a + * matching major version. + * + * If the library supports a larger major version, then it shall fall + * back to the major protocol version sent by the kernel for + * communication and reply with that major version (and an arbitrary + * supported minor version). + */ + /** Version number of this interface */ #define FUSE_KERNEL_VERSION 7 -- cgit v1.2.3 From a33e9e7f35ef6dcab528e0327f29188475f60691 Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Tue, 16 Jun 2009 17:17:27 +0300 Subject: usbnet: Add stop function pointer to 'struct rndis_data'. Allow minidriver to know that netdev has stopped. This is to let wireless turn off radio when usbnet dev is stopped. Signed-off-by: Jussi Kivilinna Acked-by: David Brownell Acked-by: David S. Miller Signed-off-by: John W. Linville --- include/linux/usb/usbnet.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index 310e18a880ff..7c17b2efba86 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -97,6 +97,9 @@ struct driver_info { /* reset device ... can sleep */ int (*reset)(struct usbnet *); + /* stop device ... can sleep */ + int (*stop)(struct usbnet *); + /* see if peer is connected ... can sleep */ int (*check_connect)(struct usbnet *); -- cgit v1.2.3 From aff89a9b9084931e51b89d8f3ee3c547bea6c422 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 1 Jul 2009 21:26:51 +0200 Subject: cfg80211: introduce nl80211 testmode command This introduces a new NL80211_CMD_TESTMODE for testing and calibration use with nl80211. There's no multiplexing like like iwpriv had, and the command is not available by default, it needs to be explicitly enabled in Kconfig and shouldn't be enabled in most kernels. The command requires a wiphy index or interface index to identify the device to operate on, and the new TESTDATA attribute. There also is API for sending replies to the command, and testmode multicast messages (on a testmode multicast group). I've also updated mac80211 to be able to pass through the command to the driver, since it itself doesn't implement the testmode command. Additionally, to give people an idea of how to use the command, I've added a little code to hwsim that makes use of the new command to set the powersave mode, this is currently done via debugfs and should remain there, and the testmode command only serves as an example of how to use this best -- with nested netlink attributes in the TESTDATA attribute. A hwsim testmode tool can be found at http://git.sipsolutions.net/hwsim.git/. This tool is BSD licensed so people can easily use it as a basis for their own internal fabrication and validation tools. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index dbea93b694e5..651b18839088 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -242,6 +242,10 @@ * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is * determined by the network interface. * + * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute + * to identify the device, and the TESTDATA blob attribute to pass through + * to the driver. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -310,6 +314,8 @@ enum nl80211_commands { NL80211_CMD_JOIN_IBSS, NL80211_CMD_LEAVE_IBSS, + NL80211_CMD_TESTMODE, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -511,6 +517,9 @@ enum nl80211_commands { * authorized by user space. Otherwise, port is marked authorized by * default in station mode. * + * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. + * We recommend using nested, driver-specific attributes within this. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -619,6 +628,8 @@ enum nl80211_attrs { NL80211_ATTR_CONTROL_PORT, + NL80211_ATTR_TESTDATA, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.3 From 6a669e65c5ec393a650362874e13f7d3365a7827 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 1 Jul 2009 21:26:53 +0200 Subject: wireless: define AKM suites We'll need these values for some drivers using connect API and for wext compat code, so let's define them. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index a9173d5434d1..23343ab0bb03 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1196,6 +1196,10 @@ enum ieee80211_sa_query_action { #define WLAN_CIPHER_SUITE_WEP104 0x000FAC05 #define WLAN_CIPHER_SUITE_AES_CMAC 0x000FAC06 +/* AKM suite selectors */ +#define WLAN_AKM_SUITE_8021X 0x000FAC01 +#define WLAN_AKM_SUITE_PSK 0x000FAC02 + #define WLAN_MAX_KEY_LEN 32 /** -- cgit v1.2.3 From b23aa676ab9d54469cda9f7151f51a2851c6f36e Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Wed, 1 Jul 2009 21:26:54 +0200 Subject: cfg80211: connect/disconnect API This patch introduces the cfg80211 connect/disconnect API. The goal here is to run the AUTH and ASSOC steps in one call. This is needed for some fullmac cards that run both steps directly from the target, after the host driver sends a connect command. Additionally, all the new crypto parameters for connect() are now also valid for associate() -- although associate requires the IEs to be used, the information can be useful for drivers and should be given. Signed-off-by: Samuel Ortiz Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 80 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 80 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 651b18839088..b34c17f52f3e 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -246,6 +246,22 @@ * to identify the device, and the TESTDATA blob attribute to pass through * to the driver. * + * @NL80211_CMD_CONNECT: connection request and notification; this command + * requests to connect to a specified network but without separating + * auth and assoc steps. For this, you need to specify the SSID in a + * %NL80211_ATTR_SSID attribute, and can optionally specify the association + * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC, + * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_CONTROL_PORT. + * It is also sent as an event, with the BSSID and response IEs when the + * connection is established or failed to be established. This can be + * determined by the STATUS_CODE attribute. + * @NL80211_CMD_ROAM: request that the card roam (currently not implemented), + * sent as an event when the card/driver roamed by itself. + * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify + * userspace that a connection was dropped by the AP or due to other + * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and + * %NL80211_ATTR_REASON_CODE attributes are used. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -316,6 +332,10 @@ enum nl80211_commands { NL80211_CMD_TESTMODE, + NL80211_CMD_CONNECT, + NL80211_CMD_ROAM, + NL80211_CMD_DISCONNECT, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -520,6 +540,30 @@ enum nl80211_commands { * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. * We recommend using nested, driver-specific attributes within this. * + * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT + * event was due to the AP disconnecting the station, and not due to + * a local disconnect request. + * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT + * event (u16) + * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating + * that protected APs should be used. + * + * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT and ASSOCIATE to + * indicate which unicast key ciphers will be used with the connection + * (an array of u32). + * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT and ASSOCIATE to indicate + * which group key cipher will be used with the connection (a u32). + * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT and ASSOCIATE to indicate + * which WPA version(s) the AP we want to associate with is using + * (a u32 with flags from &enum nl80211_wpa_versions). + * @NL80211_ATTR_AKM_SUITES: Used with CONNECT and ASSOCIATE to indicate + * which key management algorithm(s) to use (an array of u32). + * + * @NL80211_ATTR_REQ_IE: (Re)association request information elements as + * sent out by the card, for ROAM and successful CONNECT events. + * @NL80211_ATTR_RESP_IE: (Re)association response information elements as + * sent by peer, for ROAM and successful CONNECT events. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -630,6 +674,19 @@ enum nl80211_attrs { NL80211_ATTR_TESTDATA, + NL80211_ATTR_PRIVACY, + + NL80211_ATTR_DISCONNECTED_BY_AP, + NL80211_ATTR_STATUS_CODE, + + NL80211_ATTR_CIPHER_SUITES_PAIRWISE, + NL80211_ATTR_CIPHER_SUITE_GROUP, + NL80211_ATTR_WPA_VERSIONS, + NL80211_ATTR_AKM_SUITES, + + NL80211_ATTR_REQ_IE, + NL80211_ATTR_RESP_IE, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -640,6 +697,7 @@ enum nl80211_attrs { * Allow user space programs to use #ifdef on new attributes by defining them * here */ +#define NL80211_CMD_CONNECT NL80211_CMD_CONNECT #define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY #define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES #define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS @@ -653,6 +711,10 @@ enum nl80211_attrs { #define NL80211_ATTR_SSID NL80211_ATTR_SSID #define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE #define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE +#define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE +#define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP +#define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS +#define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES #define NL80211_MAX_SUPP_RATES 32 #define NL80211_MAX_SUPP_REG_RULES 32 @@ -661,6 +723,9 @@ enum nl80211_attrs { #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 #define NL80211_HT_CAPABILITY_LEN 26 +#define NL80211_MAX_NR_CIPHER_SUITES 5 +#define NL80211_MAX_NR_AKM_SUITES 2 + /** * enum nl80211_iftype - (virtual) interface types * @@ -1205,12 +1270,22 @@ enum nl80211_bss { * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only) * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r) * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP) + * @__NL80211_AUTHTYPE_NUM: internal + * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm + * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by + * trying multiple times); this is invalid in netlink -- leave out + * the attribute for this on CONNECT commands. */ enum nl80211_auth_type { NL80211_AUTHTYPE_OPEN_SYSTEM, NL80211_AUTHTYPE_SHARED_KEY, NL80211_AUTHTYPE_FT, NL80211_AUTHTYPE_NETWORK_EAP, + + /* keep last */ + __NL80211_AUTHTYPE_NUM, + NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1, + NL80211_AUTHTYPE_AUTOMATIC }; /** @@ -1235,4 +1310,9 @@ enum nl80211_mfp { NL80211_MFP_REQUIRED, }; +enum nl80211_wpa_versions { + NL80211_WPA_VERSION_1 = 1 << 0, + NL80211_WPA_VERSION_2 = 1 << 1, +}; + #endif /* __LINUX_NL80211_H */ -- cgit v1.2.3 From 1be491fca12ff599c37ceaf7e9042ebee9f0068e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 5 Jul 2009 14:51:06 +0200 Subject: rfkill: prep for rfkill API changes We've designed the /dev/rfkill API in a way that we can increase the event struct by adding members at the end, should it become necessary. To validate the events, userspace and the kernel need to have the proper event size to check for -- when reading from the other end they need to verify that it's at least version 1 of the event API, with the current struct size, so define a constant for that and make the code a little more 'future proof'. Not that I expect that we'll have to change the event size any time soon, but it's better to write the code in a way that lends itself to extending. Due to the current size of the event struct, the code is currently equivalent, but should the event struct ever need to be increased the new code might not need changing. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/rfkill.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'include/linux') diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index 2ce29831feb6..f3d5812693d6 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -82,6 +82,20 @@ struct rfkill_event { __u8 soft, hard; } __packed; +/* + * We are planning to be backward and forward compatible with changes + * to the event struct, by adding new, optional, members at the end. + * When reading an event (whether the kernel from userspace or vice + * versa) we need to accept anything that's at least as large as the + * version 1 event size, but might be able to accept other sizes in + * the future. + * + * One exception is the kernel -- we already have two event sizes in + * that we've made the 'hard' member optional since our only option + * is to ignore it anyway. + */ +#define RFKILL_EVENT_SIZE_V1 8 + /* ioctl for turning off rfkill-input (if present) */ #define RFKILL_IOC_MAGIC 'R' #define RFKILL_IOC_NOINPUT 1 -- cgit v1.2.3 From 3e5d7649a64e558e4146ddfad4dfcf13fc65dd47 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 7 Jul 2009 14:37:26 +0200 Subject: cfg80211: let SME control reassociation vs. association Since we don't really know that well in the kernel, let's let the SME control whether it wants to use reassociation or not, by allowing it to give the previous BSSID in the associate() parameters. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index b34c17f52f3e..e496a2daf7ef 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -564,6 +564,9 @@ enum nl80211_commands { * @NL80211_ATTR_RESP_IE: (Re)association response information elements as * sent by peer, for ROAM and successful CONNECT events. * + * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE + * commands to specify using a reassociate frame + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -687,6 +690,8 @@ enum nl80211_attrs { NL80211_ATTR_REQ_IE, NL80211_ATTR_RESP_IE, + NL80211_ATTR_PREV_BSSID, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.3 From 5a421ce3c062a87db0a9e7f2a0a7ee0a5b869aab Mon Sep 17 00:00:00 2001 From: Benny Halevy Date: Fri, 10 Jul 2009 12:37:40 +0300 Subject: nfsd41: gather and report statistics also for v4.1 ops Signed-off-by: Benny Halevy Signed-off-by: J. Bruce Fields --- include/linux/nfs4.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h index bd2eba530667..aff924a24abb 100644 --- a/include/linux/nfs4.h +++ b/include/linux/nfs4.h @@ -234,7 +234,7 @@ enum nfs_opnum4 { Needs to be updated if more operations are defined in future.*/ #define FIRST_NFS4_OP OP_ACCESS -#define LAST_NFS4_OP OP_RELEASE_LOCKOWNER +#define LAST_NFS4_OP OP_RECLAIM_COMPLETE enum nfsstat4 { NFS4_OK = 0, -- cgit v1.2.3 From 440c1ce178d6a6743e02d136a55b2de3f6d62a20 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Fri, 10 Jul 2009 15:33:49 +0000 Subject: dropmon: remove duplicated #include Remove duplicated #include('s) in include/linux/net_dropmon.h Signed-off-by: Huang Weiyi Signed-off-by: David S. Miller --- include/linux/net_dropmon.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/net_dropmon.h b/include/linux/net_dropmon.h index 3ceb0cc1bc78..2a739462caeb 100644 --- a/include/linux/net_dropmon.h +++ b/include/linux/net_dropmon.h @@ -3,7 +3,6 @@ #include #include -#include struct net_dm_drop_point { __u8 pc[8]; -- cgit v1.2.3 From 4bd9b0f4afc76cf972578c702e1bc1b6f2d10ba5 Mon Sep 17 00:00:00 2001 From: Andy Adamson Date: Wed, 24 Jun 2009 15:37:45 -0400 Subject: nfsd41: use globals for DRC limits The version 4.1 DRC memory limit and tracking variables are server wide and session specific. Replace struct svc_serv fields with globals. Stop using the svc_serv sv_lock. Add a spinlock to serialize access to the DRC limit management variables which change on session creation and deletion (usage counter) or (future) administrative action to adjust the total DRC memory limit. Signed-off-by: Andy Adamson Signed-off-by: Benny Halevy --- include/linux/nfsd/nfsd.h | 3 +++ include/linux/sunrpc/svc.h | 2 -- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nfsd/nfsd.h b/include/linux/nfsd/nfsd.h index 2b49d676d0c9..2571f856908f 100644 --- a/include/linux/nfsd/nfsd.h +++ b/include/linux/nfsd/nfsd.h @@ -56,6 +56,9 @@ extern struct svc_version nfsd_version2, nfsd_version3, extern u32 nfsd_supported_minorversion; extern struct mutex nfsd_mutex; extern struct svc_serv *nfsd_serv; +extern spinlock_t nfsd_drc_lock; +extern unsigned int nfsd_drc_max_pages; +extern unsigned int nfsd_drc_pages_used; extern struct seq_operations nfs_exports_op; diff --git a/include/linux/sunrpc/svc.h b/include/linux/sunrpc/svc.h index ea8009695c69..52e8cb0a7569 100644 --- a/include/linux/sunrpc/svc.h +++ b/include/linux/sunrpc/svc.h @@ -94,8 +94,6 @@ struct svc_serv { struct module * sv_module; /* optional module to count when * adding threads */ svc_thread_fn sv_function; /* main function for threads */ - unsigned int sv_drc_max_pages; /* Total pages for DRC */ - unsigned int sv_drc_pages_used;/* DRC pages used */ #if defined(CONFIG_NFS_V4_1) struct list_head sv_cb_list; /* queue for callback requests * that arrive over the same -- cgit v1.2.3 From 3d39cecc4841e8d4c4abdb401d10180f5faaded0 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Wed, 8 Jul 2009 15:23:30 +0100 Subject: intel-iommu: Remove superfluous iova_alloc_lock from IOVA code We only ever obtain this lock immediately before the iova_rbtree_lock, and release it immediately after the iova_rbtree_lock. So ditch it and just use iova_rbtree_lock. [v2: Remove the lockdep bits this time too] Signed-off-by: David Woodhouse --- include/linux/iova.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/iova.h b/include/linux/iova.h index 228f6c94b69c..76a0759e88ec 100644 --- a/include/linux/iova.h +++ b/include/linux/iova.h @@ -28,7 +28,6 @@ struct iova { /* holds all the iova translations for a domain */ struct iova_domain { - spinlock_t iova_alloc_lock;/* Lock to protect iova allocation */ spinlock_t iova_rbtree_lock; /* Lock to protect update of rbtree */ struct rb_root rbroot; /* iova domain rbtree root */ struct rb_node *cached32_node; /* Save last alloced node */ -- cgit v1.2.3 From a76761b621bcd8336065c4fe3a74f046858bc34c Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 15 Jul 2009 23:35:14 +0900 Subject: percpu: add dummy pcpu_lpage_remapped() for !CONFIG_SMP !CONFIG_SMP was missing pcpu_lpage_remapped() definition causing build failure. Add dummy implementation. This was discovered by linux-next testing. Signed-off-by: Tejun Heo Cc: Randy Dunlap Cc: Kamalesh Babulal Cc: Stephen Rothwell --- include/linux/percpu.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/percpu.h b/include/linux/percpu.h index 8ce91af4aa19..e134c8229631 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -184,6 +184,11 @@ static inline void free_percpu(void *p) static inline void __init setup_per_cpu_areas(void) { } +static inline void *pcpu_lpage_remapped(void *kaddr) +{ + return NULL; +} + #endif /* CONFIG_SMP */ #define alloc_percpu(type) (type *)__alloc_percpu(sizeof(type), \ -- cgit v1.2.3 From 1dacc76d0014a034b8aca14237c127d7c19d7726 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 1 Jul 2009 11:26:02 +0000 Subject: net/compat/wext: send different messages to compat tasks Wireless extensions have the unfortunate problem that events are multicast netlink messages, and are not independent of pointer size. Thus, currently 32-bit tasks on 64-bit platforms cannot properly receive events and fail with all kinds of strange problems, for instance wpa_supplicant never notices disassociations, due to the way the 64-bit event looks (to a 32-bit process), the fact that the address is all zeroes is lost, it thinks instead it is 00:00:00:00:01:00. The same problem existed with the ioctls, until David Miller fixed those some time ago in an heroic effort. A different problem caused by this is that we cannot send the ASSOCREQIE/ASSOCRESPIE events because sending them causes a 32-bit wpa_supplicant on a 64-bit system to overwrite its internal information, which is worse than it not getting the information at all -- so we currently resort to sending a custom string event that it then parses. This, however, has a severe size limitation we are frequently hitting with modern access points; this limitation would can be lifted after this patch by sending the correct binary, not custom, event. A similar problem apparently happens for some other netlink users on x86_64 with 32-bit tasks due to the alignment for 64-bit quantities. In order to fix these problems, I have implemented a way to send compat messages to tasks. When sending an event, we send the non-compat event data together with a compat event data in skb_shinfo(main_skb)->frag_list. Then, when the event is read from the socket, the netlink code makes sure to pass out only the skb that is compatible with the task. This approach was suggested by David Miller, my original approach required always sending two skbs but that had various small problems. To determine whether compat is needed or not, I have used the MSG_CMSG_COMPAT flag, and adjusted the call path for recv and recvfrom to include it, even if those calls do not have a cmsg parameter. I have not solved one small part of the problem, and I don't think it is necessary to: if a 32-bit application uses read() rather than any form of recvmsg() it will still get the wrong (64-bit) event. However, neither do applications actually do this, nor would it be a regression. Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- include/linux/wireless.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/wireless.h b/include/linux/wireless.h index cb24204851f7..5b4c6c772a9b 100644 --- a/include/linux/wireless.h +++ b/include/linux/wireless.h @@ -1132,6 +1132,14 @@ struct __compat_iw_event { }; #define IW_EV_COMPAT_LCP_LEN offsetof(struct __compat_iw_event, pointer) #define IW_EV_COMPAT_POINT_OFF offsetof(struct compat_iw_point, length) + +/* Size of the various events for compat */ +#define IW_EV_COMPAT_CHAR_LEN (IW_EV_COMPAT_LCP_LEN + IFNAMSIZ) +#define IW_EV_COMPAT_UINT_LEN (IW_EV_COMPAT_LCP_LEN + sizeof(__u32)) +#define IW_EV_COMPAT_FREQ_LEN (IW_EV_COMPAT_LCP_LEN + sizeof(struct iw_freq)) +#define IW_EV_COMPAT_PARAM_LEN (IW_EV_COMPAT_LCP_LEN + sizeof(struct iw_param)) +#define IW_EV_COMPAT_ADDR_LEN (IW_EV_COMPAT_LCP_LEN + sizeof(struct sockaddr)) +#define IW_EV_COMPAT_QUAL_LEN (IW_EV_COMPAT_LCP_LEN + sizeof(struct iw_quality)) #define IW_EV_COMPAT_POINT_LEN \ (IW_EV_COMPAT_LCP_LEN + sizeof(struct compat_iw_point) - \ IW_EV_COMPAT_POINT_OFF) -- cgit v1.2.3 From e36aa25a533962b08402530e8443ac804a454e27 Mon Sep 17 00:00:00 2001 From: Sridhar Samudrala Date: Tue, 14 Jul 2009 14:21:04 +0000 Subject: tun: Allow tap device to send/receive UFO packets. - Allow setting UFO on tap device and handle UFO packets. Signed-off-by: Sridhar Samudrala --------------------------------------------------------- Signed-off-by: David S. Miller --- include/linux/if_tun.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h index 915ba5789f0e..3f5fd523b49d 100644 --- a/include/linux/if_tun.h +++ b/include/linux/if_tun.h @@ -62,6 +62,7 @@ #define TUN_F_TSO4 0x02 /* I can handle TSO for IPv4 packets */ #define TUN_F_TSO6 0x04 /* I can handle TSO for IPv6 packets */ #define TUN_F_TSO_ECN 0x08 /* I can handle TSO with ECN bits. */ +#define TUN_F_UFO 0x10 /* I can handle UFO packets */ /* Protocol info prepended to the packets (when IFF_NO_PI is not set) */ #define TUN_PKT_STRIP 0x0001 -- cgit v1.2.3 From 0741241c6b80bfd58417e95de984d60c9e9ef2a0 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 17 Jul 2009 10:13:21 -0700 Subject: connector: make callback argument type explicit The connector documentation states that the argument to the callback function is always a pointer to a struct cn_msg, but rather than encode it in the API itself, it uses a void pointer everywhere. This doesn't make much sense to encode the pointer in documentation as it prevents proper C type checking from occurring and can easily allow people to use the wrong pointer type. So convert the argument type to an explicit struct cn_msg pointer. Signed-off-by: Mike Frysinger Signed-off-by: David S. Miller --- include/linux/connector.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/connector.h b/include/linux/connector.h index b68d27850d51..47ebf416f512 100644 --- a/include/linux/connector.h +++ b/include/linux/connector.h @@ -136,7 +136,7 @@ struct cn_callback_data { void *ddata; void *callback_priv; - void (*callback) (void *); + void (*callback) (struct cn_msg *); void *free; }; @@ -167,11 +167,11 @@ struct cn_dev { struct cn_queue_dev *cbdev; }; -int cn_add_callback(struct cb_id *, char *, void (*callback) (void *)); +int cn_add_callback(struct cb_id *, char *, void (*callback) (struct cn_msg *)); void cn_del_callback(struct cb_id *); int cn_netlink_send(struct cn_msg *, u32, gfp_t); -int cn_queue_add_callback(struct cn_queue_dev *dev, char *name, struct cb_id *id, void (*callback)(void *)); +int cn_queue_add_callback(struct cn_queue_dev *dev, char *name, struct cb_id *id, void (*callback)(struct cn_msg *)); void cn_queue_del_callback(struct cn_queue_dev *dev, struct cb_id *id); int queue_cn_work(struct cn_callback_entry *cbq, struct work_struct *work); -- cgit v1.2.3 From 719a72b7c75bb239ca6184190ab994b71a31c6dc Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Fri, 17 Jul 2009 14:59:55 +0000 Subject: usb: r8a66597-hcd platform data on_chip support Convert the r8a66597-hcd driver to use the on_chip flag from platform data to enable on chip behaviour instead of relying on CONFIG_SUPERH_ON_CHIP_R8A66597 ugliness. This makes the code cleaner and also allows us to support both external and internal r8a66597 with the same kernel. It also makes the Kconfig part more future proof since we with this patch can add support for new processors with on-chip r8a66597 without modifying the Kconfig. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- include/linux/usb/r8a66597.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/r8a66597.h b/include/linux/usb/r8a66597.h index e9f0384fa20c..460ee3f6a2c6 100644 --- a/include/linux/usb/r8a66597.h +++ b/include/linux/usb/r8a66597.h @@ -31,6 +31,9 @@ struct r8a66597_platdata { /* This ops can controll port power instead of DVSTCTR register. */ void (*port_power)(int port, int power); + /* set one = on chip controller, set zero = external controller */ + unsigned on_chip:1; + /* (external controller only) set R8A66597_PLATDATA_XTAL_nnMHZ */ unsigned xtal:2; -- cgit v1.2.3 From 99fde513f57db2c8e1b202ade4be7d47033ff09b Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 20 Jul 2009 22:28:50 -0700 Subject: Input: wm97xx - add possibility to control the GPIO_STATUS shift This patch allows tweaking the behaviour of GPIO_STATUS register shift quirk that's in wm97xx-core. The problem with GPIO_STATUS register being shifted by one doesn't appear on all hardware it seems and causes problems with accelerated touchscreen drivers on Palm hardware. Therefore an accelerated touchscreen driver can select if the shift is/isn't happening on the hardware. Signed-off-by: Marek Vasut Acked-by: Mark Brown Signed-off-by: Dmitry Torokhov --- include/linux/wm97xx.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/wm97xx.h b/include/linux/wm97xx.h index 6f69968eab24..0c9878123d5f 100644 --- a/include/linux/wm97xx.h +++ b/include/linux/wm97xx.h @@ -15,6 +15,12 @@ #include /* Input device layer */ #include +/* + * WM97xx variants + */ +#define WM97xx_GENERIC 0x0000 +#define WM97xx_WM1613 0x1613 + /* * WM97xx AC97 Touchscreen registers */ @@ -283,6 +289,7 @@ struct wm97xx { unsigned pen_is_down:1; /* Pen is down */ unsigned aux_waiting:1; /* aux measurement waiting */ unsigned pen_probably_down:1; /* used in polling mode */ + u16 variant; /* WM97xx chip variant */ u16 suspend_mode; /* PRP in suspend mode */ }; -- cgit v1.2.3 From d7aacaddcac3971e33cf52d7e610c06696cb347f Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 8 Jul 2009 13:21:31 +0200 Subject: Driver Core: Add platform device arch data V3 Allow architecture specific data in struct platform_device V3. With this patch struct pdev_archdata is added to struct platform_device, similar to struct dev_archdata in found in struct device. Useful for architecture code that needs to keep extra data associated with each platform device. Struct pdev_archdata is different from dev.platform_data, the convention is that dev.platform_data points to driver-specific data. It may or may not be required by the driver. The format of this depends on driver but is the same across architectures. The structure pdev_archdata is a place for architecture specific data. This data is handled by architecture specific code (for example runtime PM), and since it is architecture specific it should _never_ be touched by device driver code. Exactly like struct dev_archdata but for platform devices. [rjw: This change is for power management mostly and that's why it goes through the suspend tree.] Signed-off-by: Magnus Damm Acked-by: Kevin Hilman Acked-by: Greg Kroah-Hartman Signed-off-by: Rafael J. Wysocki --- include/linux/platform_device.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h index 8dc5123b6305..672a69849735 100644 --- a/include/linux/platform_device.h +++ b/include/linux/platform_device.h @@ -22,6 +22,9 @@ struct platform_device { struct resource * resource; struct platform_device_id *id_entry; + + /* arch specific additions */ + struct pdev_archdata archdata; }; #define platform_get_device_id(pdev) ((pdev)->id_entry) -- cgit v1.2.3 From 511647ff58fd0f1c1f415d2c757d841650edac91 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 8 Jul 2009 13:23:07 +0200 Subject: PM: Remove platform device suspend_late()/resume_early() V2 This is V2 of the platform driver power management late/early callback removal patch. The callbacks ->suspend_late() and ->resume_early() are removed since all in-tree users now have been migrated to dev_pm_ops. Signed-off-by: Magnus Damm Acked-by: Greg Kroah-Hartman Acked-by: Pavel Machek Signed-off-by: Rafael J. Wysocki --- include/linux/platform_device.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h index 672a69849735..3c6675c2444b 100644 --- a/include/linux/platform_device.h +++ b/include/linux/platform_device.h @@ -60,8 +60,6 @@ struct platform_driver { int (*remove)(struct platform_device *); void (*shutdown)(struct platform_device *); int (*suspend)(struct platform_device *, pm_message_t state); - int (*suspend_late)(struct platform_device *, pm_message_t state); - int (*resume_early)(struct platform_device *); int (*resume)(struct platform_device *); struct device_driver driver; struct platform_device_id *id_table; -- cgit v1.2.3 From fbd90375d7531927d312766b548376d909811b4d Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 22 Jul 2009 13:40:14 +0200 Subject: hrtimer: Remove cb_entry from struct hrtimer It's unused, remove it. Signed-off-by: Peter Zijlstra Signed-off-by: Thomas Gleixner LKML-Reference: --- include/linux/hrtimer.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index 54648e625efd..40e7d54fc424 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -91,7 +91,6 @@ enum hrtimer_restart { * @function: timer expiry callback function * @base: pointer to the timer base (per cpu and per clock) * @state: state information (See bit values above) - * @cb_entry: list head to enqueue an expired timer into the callback list * @start_site: timer statistics field to store the site where the timer * was started * @start_comm: timer statistics field to store the name of the process which @@ -108,7 +107,6 @@ struct hrtimer { enum hrtimer_restart (*function)(struct hrtimer *); struct hrtimer_clock_base *base; unsigned long state; - struct list_head cb_entry; #ifdef CONFIG_TIMER_STATS int start_pid; void *start_site; -- cgit v1.2.3 From cf4f1e76c49dacfde0680b170b9a9b6a42f296bb Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 22 Jul 2009 14:32:03 +0000 Subject: usb: move r8a66597 register defines Move r8a66597 hardware register definitions from the host controller header file to the platform data header file. With this change in place we can easily share register definitions between the host controller driver and a future gadget driver. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- include/linux/usb/r8a66597.h | 372 ++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 370 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/r8a66597.h b/include/linux/usb/r8a66597.h index 460ee3f6a2c6..26d216734057 100644 --- a/include/linux/usb/r8a66597.h +++ b/include/linux/usb/r8a66597.h @@ -28,7 +28,7 @@ #define R8A66597_PLATDATA_XTAL_48MHZ 0x03 struct r8a66597_platdata { - /* This ops can controll port power instead of DVSTCTR register. */ + /* This callback can control port power instead of DVSTCTR register. */ void (*port_power)(int port, int power); /* set one = on chip controller, set zero = external controller */ @@ -43,5 +43,373 @@ struct r8a66597_platdata { /* set one = big endian, set zero = little endian */ unsigned endian:1; }; -#endif + +/* Register definitions */ +#define SYSCFG0 0x00 +#define SYSCFG1 0x02 +#define SYSSTS0 0x04 +#define SYSSTS1 0x06 +#define DVSTCTR0 0x08 +#define DVSTCTR1 0x0A +#define TESTMODE 0x0C +#define PINCFG 0x0E +#define DMA0CFG 0x10 +#define DMA1CFG 0x12 +#define CFIFO 0x14 +#define D0FIFO 0x18 +#define D1FIFO 0x1C +#define CFIFOSEL 0x20 +#define CFIFOCTR 0x22 +#define CFIFOSIE 0x24 +#define D0FIFOSEL 0x28 +#define D0FIFOCTR 0x2A +#define D1FIFOSEL 0x2C +#define D1FIFOCTR 0x2E +#define INTENB0 0x30 +#define INTENB1 0x32 +#define INTENB2 0x34 +#define BRDYENB 0x36 +#define NRDYENB 0x38 +#define BEMPENB 0x3A +#define SOFCFG 0x3C +#define INTSTS0 0x40 +#define INTSTS1 0x42 +#define INTSTS2 0x44 +#define BRDYSTS 0x46 +#define NRDYSTS 0x48 +#define BEMPSTS 0x4A +#define FRMNUM 0x4C +#define UFRMNUM 0x4E +#define USBADDR 0x50 +#define USBREQ 0x54 +#define USBVAL 0x56 +#define USBINDX 0x58 +#define USBLENG 0x5A +#define DCPCFG 0x5C +#define DCPMAXP 0x5E +#define DCPCTR 0x60 +#define PIPESEL 0x64 +#define PIPECFG 0x68 +#define PIPEBUF 0x6A +#define PIPEMAXP 0x6C +#define PIPEPERI 0x6E +#define PIPE1CTR 0x70 +#define PIPE2CTR 0x72 +#define PIPE3CTR 0x74 +#define PIPE4CTR 0x76 +#define PIPE5CTR 0x78 +#define PIPE6CTR 0x7A +#define PIPE7CTR 0x7C +#define PIPE8CTR 0x7E +#define PIPE9CTR 0x80 +#define PIPE1TRE 0x90 +#define PIPE1TRN 0x92 +#define PIPE2TRE 0x94 +#define PIPE2TRN 0x96 +#define PIPE3TRE 0x98 +#define PIPE3TRN 0x9A +#define PIPE4TRE 0x9C +#define PIPE4TRN 0x9E +#define PIPE5TRE 0xA0 +#define PIPE5TRN 0xA2 +#define DEVADD0 0xD0 +#define DEVADD1 0xD2 +#define DEVADD2 0xD4 +#define DEVADD3 0xD6 +#define DEVADD4 0xD8 +#define DEVADD5 0xDA +#define DEVADD6 0xDC +#define DEVADD7 0xDE +#define DEVADD8 0xE0 +#define DEVADD9 0xE2 +#define DEVADDA 0xE4 + +/* System Configuration Control Register */ +#define XTAL 0xC000 /* b15-14: Crystal selection */ +#define XTAL48 0x8000 /* 48MHz */ +#define XTAL24 0x4000 /* 24MHz */ +#define XTAL12 0x0000 /* 12MHz */ +#define XCKE 0x2000 /* b13: External clock enable */ +#define PLLC 0x0800 /* b11: PLL control */ +#define SCKE 0x0400 /* b10: USB clock enable */ +#define PCSDIS 0x0200 /* b9: not CS wakeup */ +#define LPSME 0x0100 /* b8: Low power sleep mode */ +#define HSE 0x0080 /* b7: Hi-speed enable */ +#define DCFM 0x0040 /* b6: Controller function select */ +#define DRPD 0x0020 /* b5: D+/- pull down control */ +#define DPRPU 0x0010 /* b4: D+ pull up control */ +#define USBE 0x0001 /* b0: USB module operation enable */ + +/* System Configuration Status Register */ +#define OVCBIT 0x8000 /* b15-14: Over-current bit */ +#define OVCMON 0xC000 /* b15-14: Over-current monitor */ +#define SOFEA 0x0020 /* b5: SOF monitor */ +#define IDMON 0x0004 /* b3: ID-pin monitor */ +#define LNST 0x0003 /* b1-0: D+, D- line status */ +#define SE1 0x0003 /* SE1 */ +#define FS_KSTS 0x0002 /* Full-Speed K State */ +#define FS_JSTS 0x0001 /* Full-Speed J State */ +#define LS_JSTS 0x0002 /* Low-Speed J State */ +#define LS_KSTS 0x0001 /* Low-Speed K State */ +#define SE0 0x0000 /* SE0 */ + +/* Device State Control Register */ +#define EXTLP0 0x0400 /* b10: External port */ +#define VBOUT 0x0200 /* b9: VBUS output */ +#define WKUP 0x0100 /* b8: Remote wakeup */ +#define RWUPE 0x0080 /* b7: Remote wakeup sense */ +#define USBRST 0x0040 /* b6: USB reset enable */ +#define RESUME 0x0020 /* b5: Resume enable */ +#define UACT 0x0010 /* b4: USB bus enable */ +#define RHST 0x0007 /* b1-0: Reset handshake status */ +#define HSPROC 0x0004 /* HS handshake is processing */ +#define HSMODE 0x0003 /* Hi-Speed mode */ +#define FSMODE 0x0002 /* Full-Speed mode */ +#define LSMODE 0x0001 /* Low-Speed mode */ +#define UNDECID 0x0000 /* Undecided */ + +/* Test Mode Register */ +#define UTST 0x000F /* b3-0: Test select */ +#define H_TST_PACKET 0x000C /* HOST TEST Packet */ +#define H_TST_SE0_NAK 0x000B /* HOST TEST SE0 NAK */ +#define H_TST_K 0x000A /* HOST TEST K */ +#define H_TST_J 0x0009 /* HOST TEST J */ +#define H_TST_NORMAL 0x0000 /* HOST Normal Mode */ +#define P_TST_PACKET 0x0004 /* PERI TEST Packet */ +#define P_TST_SE0_NAK 0x0003 /* PERI TEST SE0 NAK */ +#define P_TST_K 0x0002 /* PERI TEST K */ +#define P_TST_J 0x0001 /* PERI TEST J */ +#define P_TST_NORMAL 0x0000 /* PERI Normal Mode */ + +/* Data Pin Configuration Register */ +#define LDRV 0x8000 /* b15: Drive Current Adjust */ +#define VIF1 0x0000 /* VIF = 1.8V */ +#define VIF3 0x8000 /* VIF = 3.3V */ +#define INTA 0x0001 /* b1: USB INT-pin active */ + +/* DMAx Pin Configuration Register */ +#define DREQA 0x4000 /* b14: Dreq active select */ +#define BURST 0x2000 /* b13: Burst mode */ +#define DACKA 0x0400 /* b10: Dack active select */ +#define DFORM 0x0380 /* b9-7: DMA mode select */ +#define CPU_ADR_RD_WR 0x0000 /* Address + RD/WR mode (CPU bus) */ +#define CPU_DACK_RD_WR 0x0100 /* DACK + RD/WR mode (CPU bus) */ +#define CPU_DACK_ONLY 0x0180 /* DACK only mode (CPU bus) */ +#define SPLIT_DACK_ONLY 0x0200 /* DACK only mode (SPLIT bus) */ +#define DENDA 0x0040 /* b6: Dend active select */ +#define PKTM 0x0020 /* b5: Packet mode */ +#define DENDE 0x0010 /* b4: Dend enable */ +#define OBUS 0x0004 /* b2: OUTbus mode */ + +/* CFIFO/DxFIFO Port Select Register */ +#define RCNT 0x8000 /* b15: Read count mode */ +#define REW 0x4000 /* b14: Buffer rewind */ +#define DCLRM 0x2000 /* b13: DMA buffer clear mode */ +#define DREQE 0x1000 /* b12: DREQ output enable */ +#define MBW_8 0x0000 /* 8bit */ +#define MBW_16 0x0400 /* 16bit */ +#define MBW_32 0x0800 /* 32bit */ +#define BIGEND 0x0100 /* b8: Big endian mode */ +#define BYTE_LITTLE 0x0000 /* little dendian */ +#define BYTE_BIG 0x0100 /* big endifan */ +#define ISEL 0x0020 /* b5: DCP FIFO port direction select */ +#define CURPIPE 0x000F /* b2-0: PIPE select */ + +/* CFIFO/DxFIFO Port Control Register */ +#define BVAL 0x8000 /* b15: Buffer valid flag */ +#define BCLR 0x4000 /* b14: Buffer clear */ +#define FRDY 0x2000 /* b13: FIFO ready */ +#define DTLN 0x0FFF /* b11-0: FIFO received data length */ + +/* Interrupt Enable Register 0 */ +#define VBSE 0x8000 /* b15: VBUS interrupt */ +#define RSME 0x4000 /* b14: Resume interrupt */ +#define SOFE 0x2000 /* b13: Frame update interrupt */ +#define DVSE 0x1000 /* b12: Device state transition interrupt */ +#define CTRE 0x0800 /* b11: Control transfer stage transition interrupt */ +#define BEMPE 0x0400 /* b10: Buffer empty interrupt */ +#define NRDYE 0x0200 /* b9: Buffer not ready interrupt */ +#define BRDYE 0x0100 /* b8: Buffer ready interrupt */ + +/* Interrupt Enable Register 1 */ +#define OVRCRE 0x8000 /* b15: Over-current interrupt */ +#define BCHGE 0x4000 /* b14: USB us chenge interrupt */ +#define DTCHE 0x1000 /* b12: Detach sense interrupt */ +#define ATTCHE 0x0800 /* b11: Attach sense interrupt */ +#define EOFERRE 0x0040 /* b6: EOF error interrupt */ +#define SIGNE 0x0020 /* b5: SETUP IGNORE interrupt */ +#define SACKE 0x0010 /* b4: SETUP ACK interrupt */ + +/* BRDY Interrupt Enable/Status Register */ +#define BRDY9 0x0200 /* b9: PIPE9 */ +#define BRDY8 0x0100 /* b8: PIPE8 */ +#define BRDY7 0x0080 /* b7: PIPE7 */ +#define BRDY6 0x0040 /* b6: PIPE6 */ +#define BRDY5 0x0020 /* b5: PIPE5 */ +#define BRDY4 0x0010 /* b4: PIPE4 */ +#define BRDY3 0x0008 /* b3: PIPE3 */ +#define BRDY2 0x0004 /* b2: PIPE2 */ +#define BRDY1 0x0002 /* b1: PIPE1 */ +#define BRDY0 0x0001 /* b1: PIPE0 */ + +/* NRDY Interrupt Enable/Status Register */ +#define NRDY9 0x0200 /* b9: PIPE9 */ +#define NRDY8 0x0100 /* b8: PIPE8 */ +#define NRDY7 0x0080 /* b7: PIPE7 */ +#define NRDY6 0x0040 /* b6: PIPE6 */ +#define NRDY5 0x0020 /* b5: PIPE5 */ +#define NRDY4 0x0010 /* b4: PIPE4 */ +#define NRDY3 0x0008 /* b3: PIPE3 */ +#define NRDY2 0x0004 /* b2: PIPE2 */ +#define NRDY1 0x0002 /* b1: PIPE1 */ +#define NRDY0 0x0001 /* b1: PIPE0 */ + +/* BEMP Interrupt Enable/Status Register */ +#define BEMP9 0x0200 /* b9: PIPE9 */ +#define BEMP8 0x0100 /* b8: PIPE8 */ +#define BEMP7 0x0080 /* b7: PIPE7 */ +#define BEMP6 0x0040 /* b6: PIPE6 */ +#define BEMP5 0x0020 /* b5: PIPE5 */ +#define BEMP4 0x0010 /* b4: PIPE4 */ +#define BEMP3 0x0008 /* b3: PIPE3 */ +#define BEMP2 0x0004 /* b2: PIPE2 */ +#define BEMP1 0x0002 /* b1: PIPE1 */ +#define BEMP0 0x0001 /* b0: PIPE0 */ + +/* SOF Pin Configuration Register */ +#define TRNENSEL 0x0100 /* b8: Select transaction enable period */ +#define BRDYM 0x0040 /* b6: BRDY clear timing */ +#define INTL 0x0020 /* b5: Interrupt sense select */ +#define EDGESTS 0x0010 /* b4: */ +#define SOFMODE 0x000C /* b3-2: SOF pin select */ +#define SOF_125US 0x0008 /* SOF OUT 125us Frame Signal */ +#define SOF_1MS 0x0004 /* SOF OUT 1ms Frame Signal */ +#define SOF_DISABLE 0x0000 /* SOF OUT Disable */ + +/* Interrupt Status Register 0 */ +#define VBINT 0x8000 /* b15: VBUS interrupt */ +#define RESM 0x4000 /* b14: Resume interrupt */ +#define SOFR 0x2000 /* b13: SOF frame update interrupt */ +#define DVST 0x1000 /* b12: Device state transition interrupt */ +#define CTRT 0x0800 /* b11: Control transfer stage transition interrupt */ +#define BEMP 0x0400 /* b10: Buffer empty interrupt */ +#define NRDY 0x0200 /* b9: Buffer not ready interrupt */ +#define BRDY 0x0100 /* b8: Buffer ready interrupt */ +#define VBSTS 0x0080 /* b7: VBUS input port */ +#define DVSQ 0x0070 /* b6-4: Device state */ +#define DS_SPD_CNFG 0x0070 /* Suspend Configured */ +#define DS_SPD_ADDR 0x0060 /* Suspend Address */ +#define DS_SPD_DFLT 0x0050 /* Suspend Default */ +#define DS_SPD_POWR 0x0040 /* Suspend Powered */ +#define DS_SUSP 0x0040 /* Suspend */ +#define DS_CNFG 0x0030 /* Configured */ +#define DS_ADDS 0x0020 /* Address */ +#define DS_DFLT 0x0010 /* Default */ +#define DS_POWR 0x0000 /* Powered */ +#define DVSQS 0x0030 /* b5-4: Device state */ +#define VALID 0x0008 /* b3: Setup packet detected flag */ +#define CTSQ 0x0007 /* b2-0: Control transfer stage */ +#define CS_SQER 0x0006 /* Sequence error */ +#define CS_WRND 0x0005 /* Control write nodata status stage */ +#define CS_WRSS 0x0004 /* Control write status stage */ +#define CS_WRDS 0x0003 /* Control write data stage */ +#define CS_RDSS 0x0002 /* Control read status stage */ +#define CS_RDDS 0x0001 /* Control read data stage */ +#define CS_IDST 0x0000 /* Idle or setup stage */ + +/* Interrupt Status Register 1 */ +#define OVRCR 0x8000 /* b15: Over-current interrupt */ +#define BCHG 0x4000 /* b14: USB bus chenge interrupt */ +#define DTCH 0x1000 /* b12: Detach sense interrupt */ +#define ATTCH 0x0800 /* b11: Attach sense interrupt */ +#define EOFERR 0x0040 /* b6: EOF-error interrupt */ +#define SIGN 0x0020 /* b5: Setup ignore interrupt */ +#define SACK 0x0010 /* b4: Setup acknowledge interrupt */ + +/* Frame Number Register */ +#define OVRN 0x8000 /* b15: Overrun error */ +#define CRCE 0x4000 /* b14: Received data error */ +#define FRNM 0x07FF /* b10-0: Frame number */ + +/* Micro Frame Number Register */ +#define UFRNM 0x0007 /* b2-0: Micro frame number */ + +/* Default Control Pipe Maxpacket Size Register */ +/* Pipe Maxpacket Size Register */ +#define DEVSEL 0xF000 /* b15-14: Device address select */ +#define MAXP 0x007F /* b6-0: Maxpacket size of default control pipe */ + +/* Default Control Pipe Control Register */ +#define BSTS 0x8000 /* b15: Buffer status */ +#define SUREQ 0x4000 /* b14: Send USB request */ +#define CSCLR 0x2000 /* b13: complete-split status clear */ +#define CSSTS 0x1000 /* b12: complete-split status */ +#define SUREQCLR 0x0800 /* b11: stop setup request */ +#define SQCLR 0x0100 /* b8: Sequence toggle bit clear */ +#define SQSET 0x0080 /* b7: Sequence toggle bit set */ +#define SQMON 0x0040 /* b6: Sequence toggle bit monitor */ +#define PBUSY 0x0020 /* b5: pipe busy */ +#define PINGE 0x0010 /* b4: ping enable */ +#define CCPL 0x0004 /* b2: Enable control transfer complete */ +#define PID 0x0003 /* b1-0: Response PID */ +#define PID_STALL11 0x0003 /* STALL */ +#define PID_STALL 0x0002 /* STALL */ +#define PID_BUF 0x0001 /* BUF */ +#define PID_NAK 0x0000 /* NAK */ + +/* Pipe Window Select Register */ +#define PIPENM 0x0007 /* b2-0: Pipe select */ + +/* Pipe Configuration Register */ +#define R8A66597_TYP 0xC000 /* b15-14: Transfer type */ +#define R8A66597_ISO 0xC000 /* Isochronous */ +#define R8A66597_INT 0x8000 /* Interrupt */ +#define R8A66597_BULK 0x4000 /* Bulk */ +#define R8A66597_BFRE 0x0400 /* b10: Buffer ready interrupt mode select */ +#define R8A66597_DBLB 0x0200 /* b9: Double buffer mode select */ +#define R8A66597_CNTMD 0x0100 /* b8: Continuous transfer mode select */ +#define R8A66597_SHTNAK 0x0080 /* b7: Transfer end NAK */ +#define R8A66597_DIR 0x0010 /* b4: Transfer direction select */ +#define R8A66597_EPNUM 0x000F /* b3-0: Eendpoint number select */ + +/* Pipe Buffer Configuration Register */ +#define BUFSIZE 0x7C00 /* b14-10: Pipe buffer size */ +#define BUFNMB 0x007F /* b6-0: Pipe buffer number */ +#define PIPE0BUF 256 +#define PIPExBUF 64 + +/* Pipe Maxpacket Size Register */ +#define MXPS 0x07FF /* b10-0: Maxpacket size */ + +/* Pipe Cycle Configuration Register */ +#define IFIS 0x1000 /* b12: Isochronous in-buffer flush mode select */ +#define IITV 0x0007 /* b2-0: Isochronous interval */ + +/* Pipex Control Register */ +#define BSTS 0x8000 /* b15: Buffer status */ +#define INBUFM 0x4000 /* b14: IN buffer monitor (Only for PIPE1 to 5) */ +#define CSCLR 0x2000 /* b13: complete-split status clear */ +#define CSSTS 0x1000 /* b12: complete-split status */ +#define ATREPM 0x0400 /* b10: Auto repeat mode */ +#define ACLRM 0x0200 /* b9: Out buffer auto clear mode */ +#define SQCLR 0x0100 /* b8: Sequence toggle bit clear */ +#define SQSET 0x0080 /* b7: Sequence toggle bit set */ +#define SQMON 0x0040 /* b6: Sequence toggle bit monitor */ +#define PBUSY 0x0020 /* b5: pipe busy */ +#define PID 0x0003 /* b1-0: Response PID */ + +/* PIPExTRE */ +#define TRENB 0x0200 /* b9: Transaction counter enable */ +#define TRCLR 0x0100 /* b8: Transaction counter clear */ + +/* PIPExTRN */ +#define TRNCNT 0xFFFF /* b15-0: Transaction counter */ + +/* DEVADDx */ +#define UPPHUB 0x7800 +#define HUBPORT 0x0700 +#define USBSPD 0x00C0 +#define RTPORT 0x0001 + +#endif /* __LINUX_USB_R8A66597_H */ -- cgit v1.2.3 From 2c59b0b70b9d5d61c726f179724660c4c2423f31 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 22 Jul 2009 14:41:35 +0000 Subject: usb: m66592-udc platform data on_chip support Convert the m66592-udc driver to use the on_chip flag from platform data to enable on chip behaviour instead of relying on CONFIG_SUPERH_BUILT_IN_M66592 ugliness. This makes the code cleaner and also allows us to support both external and internal m66592 with the same kernel. It also makes the Kconfig part more future proof since we with this patch can add support for new processors with on-chip m66592 without modifying the Kconfig. The patch adds a m66592 header file for platform data and ties in platform data to the existing m66592 devices. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- include/linux/usb/m66592.h | 44 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) create mode 100644 include/linux/usb/m66592.h (limited to 'include/linux') diff --git a/include/linux/usb/m66592.h b/include/linux/usb/m66592.h new file mode 100644 index 000000000000..cda9625e7df0 --- /dev/null +++ b/include/linux/usb/m66592.h @@ -0,0 +1,44 @@ +/* + * M66592 driver platform data + * + * Copyright (C) 2009 Renesas Solutions Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#ifndef __LINUX_USB_M66592_H +#define __LINUX_USB_M66592_H + +#define M66592_PLATDATA_XTAL_12MHZ 0x01 +#define M66592_PLATDATA_XTAL_24MHZ 0x02 +#define M66592_PLATDATA_XTAL_48MHZ 0x03 + +struct m66592_platdata { + /* one = on chip controller, zero = external controller */ + unsigned on_chip:1; + + /* one = big endian, zero = little endian */ + unsigned endian:1; + + /* (external controller only) M66592_PLATDATA_XTAL_nnMHZ */ + unsigned xtal:2; + + /* (external controller only) one = 3.3V, zero = 1.5V */ + unsigned vif:1; + +}; + +#endif /* __LINUX_USB_M66592_H */ + -- cgit v1.2.3 From d9ab77161d811ffb0bccf396f7155cc905c1b9e1 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 22 Jul 2009 00:37:25 +0200 Subject: Driver Core: Make PM operations a const pointer They are not supposed to be modified by drivers, so make them const. Signed-off-by: Dmitry Torokhov Acked-by: Greg Kroah-Hartman Signed-off-by: Rafael J. Wysocki --- include/linux/device.h | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/device.h b/include/linux/device.h index aebb81036db2..a28642975053 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -62,7 +62,7 @@ struct bus_type { int (*suspend)(struct device *dev, pm_message_t state); int (*resume)(struct device *dev); - struct dev_pm_ops *pm; + const struct dev_pm_ops *pm; struct bus_type_private *p; }; @@ -132,7 +132,7 @@ struct device_driver { int (*resume) (struct device *dev); struct attribute_group **groups; - struct dev_pm_ops *pm; + const struct dev_pm_ops *pm; struct driver_private *p; }; @@ -200,7 +200,8 @@ struct class { int (*suspend)(struct device *dev, pm_message_t state); int (*resume)(struct device *dev); - struct dev_pm_ops *pm; + const struct dev_pm_ops *pm; + struct class_private *p; }; @@ -291,7 +292,7 @@ struct device_type { char *(*nodename)(struct device *dev); void (*release)(struct device *dev); - struct dev_pm_ops *pm; + const struct dev_pm_ops *pm; }; /* interface for exporting device attributes */ -- cgit v1.2.3 From b9454e83cac42fcdc90bfbfba479132bd6629455 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 8 Jul 2009 13:29:08 +0200 Subject: nl80211: introduce new key attributes We will soon want to nest key attributes into some new attribute for configuring static WEP keys at connect() and ibss_join() time, so we need nested attributes for that. However, key attributes right now are 'global'. This patch thus introduces new nested attributes for the key settings and functions for parsing them. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index e496a2daf7ef..48e0913c2209 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -567,6 +567,9 @@ enum nl80211_commands { * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE * commands to specify using a reassociate frame * + * @NL80211_ATTR_KEY: key information in a nested attribute with + * %NL80211_KEY_* sub-attributes + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -692,6 +695,8 @@ enum nl80211_attrs { NL80211_ATTR_PREV_BSSID, + NL80211_ATTR_KEY, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -720,6 +725,7 @@ enum nl80211_attrs { #define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP #define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS #define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES +#define NL80211_ATTR_KEY NL80211_ATTR_KEY #define NL80211_MAX_SUPP_RATES 32 #define NL80211_MAX_SUPP_REG_RULES 32 @@ -1320,4 +1326,34 @@ enum nl80211_wpa_versions { NL80211_WPA_VERSION_2 = 1 << 1, }; +/** + * enum nl80211_key_attributes - key attributes + * @__NL80211_KEY_INVALID: invalid + * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of + * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC + * keys + * @NL80211_KEY_IDX: key ID (u8, 0-3) + * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 + * section 7.3.2.25.1, e.g. 0x000FAC04) + * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and + * CCMP keys, each six bytes in little endian + * @NL80211_KEY_DEFAULT: flag indicating default key + * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key + * @__NL80211_KEY_AFTER_LAST: internal + * @NL80211_KEY_MAX: highest key attribute + */ +enum nl80211_key_attributes { + __NL80211_KEY_INVALID, + NL80211_KEY_DATA, + NL80211_KEY_IDX, + NL80211_KEY_CIPHER, + NL80211_KEY_SEQ, + NL80211_KEY_DEFAULT, + NL80211_KEY_DEFAULT_MGMT, + + /* keep last */ + __NL80211_KEY_AFTER_LAST, + NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1 +}; + #endif /* __LINUX_NL80211_H */ -- cgit v1.2.3 From fffd0934b9390f34bec45762192b7edd3b12b4b5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 8 Jul 2009 14:22:54 +0200 Subject: cfg80211: rework key operation This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 48e0913c2209..b043b78dd2c3 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -569,6 +569,9 @@ enum nl80211_commands { * * @NL80211_ATTR_KEY: key information in a nested attribute with * %NL80211_KEY_* sub-attributes + * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect() + * and join_ibss(), key information is in a nested attribute each + * with %NL80211_KEY_* sub-attributes * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -696,6 +699,7 @@ enum nl80211_attrs { NL80211_ATTR_PREV_BSSID, NL80211_ATTR_KEY, + NL80211_ATTR_KEYS, /* add attributes here, update the policy in nl80211.c */ @@ -726,6 +730,7 @@ enum nl80211_attrs { #define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS #define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES #define NL80211_ATTR_KEY NL80211_ATTR_KEY +#define NL80211_ATTR_KEYS NL80211_ATTR_KEYS #define NL80211_MAX_SUPP_RATES 32 #define NL80211_MAX_SUPP_REG_RULES 32 -- cgit v1.2.3 From 48ab905d1a81b7df33a33def04a890e4e0c51460 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 10 Jul 2009 18:42:31 +0200 Subject: nl80211: report BSS status When connected to a BSS, or joined to an IBSS, we'll want to know in userspace without using wireless extensions, so report the BSS status in the BSS list. Userspace can query the BSS list, display all the information and retrieve the station information as well. For example (from hwsim): $ iw dev wlan1 scan dump BSS 02:00:00:00:00:00 (on wlan1) -- associated freq: 2462 beacon interval: 100 capability: ESS ShortSlotTime (0x0401) signal: -50.00 dBm SSID: j Supported rates: 1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0 18.0 DS Paramater set: channel 11 ERP: Extended supported rates: 24.0 36.0 48.0 54.0 Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index b043b78dd2c3..962e2232a074 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -1260,6 +1260,7 @@ enum nl80211_channel_type { * in mBm (100 * dBm) (s32) * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon * in unspecified units, scaled to 0..100 (u8) + * @NL80211_BSS_STATUS: status, if this BSS is "used" * @__NL80211_BSS_AFTER_LAST: internal * @NL80211_BSS_MAX: highest BSS attribute */ @@ -1273,12 +1274,22 @@ enum nl80211_bss { NL80211_BSS_INFORMATION_ELEMENTS, NL80211_BSS_SIGNAL_MBM, NL80211_BSS_SIGNAL_UNSPEC, + NL80211_BSS_STATUS, /* keep last */ __NL80211_BSS_AFTER_LAST, NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1 }; +/** + * enum nl80211_bss_status - BSS "status" + */ +enum nl80211_bss_status { + NL80211_BSS_STATUS_AUTHENTICATED, + NL80211_BSS_STATUS_ASSOCIATED, + NL80211_BSS_STATUS_IBSS_JOINED, +}; + /** * enum nl80211_auth_type - AuthenticationType * -- cgit v1.2.3 From 72bce62775db0315511474e8d8f8e25d25b48366 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 17 Jun 2009 17:45:28 +0200 Subject: net: remove unused skb->do_not_encrypt mac80211 required this due to the master netdev, but now it can put all information into skb->cb and this can go. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/skbuff.h | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index f2c69a2cca17..df7b23ac66e6 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -304,7 +304,6 @@ typedef unsigned char *sk_buff_data_t; * @tc_index: Traffic control index * @tc_verd: traffic control verdict * @ndisc_nodetype: router type (from link layer) - * @do_not_encrypt: set to prevent encryption of this frame * @dma_cookie: a cookie to one of several possible DMA operations * done by skb DMA functions * @secmark: security marking @@ -379,13 +378,10 @@ struct sk_buff { kmemcheck_bitfield_begin(flags2); #ifdef CONFIG_IPV6_NDISC_NODETYPE __u8 ndisc_nodetype:2; -#endif -#if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE) - __u8 do_not_encrypt:1; #endif kmemcheck_bitfield_end(flags2); - /* 0/13/14 bit hole */ + /* 0/14 bit hole */ #ifdef CONFIG_NET_DMA dma_cookie_t dma_cookie; -- cgit v1.2.3 From 8150f32b90f630ad3e460f026ce338cb81685bc9 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 24 Jul 2009 22:11:32 -0700 Subject: Driver Core: Make PM operations a const pointer They are not supposed to be modified by drivers, so make them const. Signed-off-by: Dmitry Torokhov Acked-by: Greg Kroah-Hartman Signed-off-by: Rafael J. Wysocki --- include/linux/device.h | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/device.h b/include/linux/device.h index aebb81036db2..a28642975053 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -62,7 +62,7 @@ struct bus_type { int (*suspend)(struct device *dev, pm_message_t state); int (*resume)(struct device *dev); - struct dev_pm_ops *pm; + const struct dev_pm_ops *pm; struct bus_type_private *p; }; @@ -132,7 +132,7 @@ struct device_driver { int (*resume) (struct device *dev); struct attribute_group **groups; - struct dev_pm_ops *pm; + const struct dev_pm_ops *pm; struct driver_private *p; }; @@ -200,7 +200,8 @@ struct class { int (*suspend)(struct device *dev, pm_message_t state); int (*resume)(struct device *dev); - struct dev_pm_ops *pm; + const struct dev_pm_ops *pm; + struct class_private *p; }; @@ -291,7 +292,7 @@ struct device_type { char *(*nodename)(struct device *dev); void (*release)(struct device *dev); - struct dev_pm_ops *pm; + const struct dev_pm_ops *pm; }; /* interface for exporting device attributes */ -- cgit v1.2.3 From cb3824bade2549d7ad059d5802da43312540fdee Mon Sep 17 00:00:00 2001 From: Karsten Keil Date: Wed, 8 Jul 2009 14:21:12 +0200 Subject: ISDN: Make isdnhdlc usable for other ISDN drivers isdnhdlc is useful for other ISDN drivers as well. Move the include file to a central location and the source to the central isdn location. Signed-off-by: Karsten Keil --- include/linux/isdn/hdlc.h | 70 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 70 insertions(+) create mode 100644 include/linux/isdn/hdlc.h (limited to 'include/linux') diff --git a/include/linux/isdn/hdlc.h b/include/linux/isdn/hdlc.h new file mode 100644 index 000000000000..cf0a95a24015 --- /dev/null +++ b/include/linux/isdn/hdlc.h @@ -0,0 +1,70 @@ +/* + * isdnhdlc.h -- General purpose ISDN HDLC decoder. + * + * Implementation of a HDLC decoder/encoder in software. + * Neccessary because some ISDN devices don't have HDLC + * controllers. Also included: a bit reversal table. + * + *Copyright (C) 2002 Wolfgang Mües + * 2001 Frode Isaksen + * 2001 Kai Germaschewski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ISDNHDLC_H__ +#define __ISDNHDLC_H__ + +struct isdnhdlc_vars { + int bit_shift; + int hdlc_bits1; + int data_bits; + int ffbit_shift; // encoding only + int state; + int dstpos; + + unsigned short crc; + + unsigned char cbin; + unsigned char shift_reg; + unsigned char ffvalue; + + unsigned int data_received:1; // set if transferring data + unsigned int dchannel:1; // set if D channel (send idle instead of flags) + unsigned int do_adapt56:1; // set if 56K adaptation + unsigned int do_closing:1; // set if in closing phase (need to send CRC + flag +}; + + +/* + The return value from isdnhdlc_decode is + the frame length, 0 if no complete frame was decoded, + or a negative error number +*/ +#define HDLC_FRAMING_ERROR 1 +#define HDLC_CRC_ERROR 2 +#define HDLC_LENGTH_ERROR 3 + +extern void isdnhdlc_rcv_init (struct isdnhdlc_vars *hdlc, int do_adapt56); + +extern int isdnhdlc_decode (struct isdnhdlc_vars *hdlc, const unsigned char *src, int slen,int *count, + unsigned char *dst, int dsize); + +extern void isdnhdlc_out_init (struct isdnhdlc_vars *hdlc,int is_d_channel,int do_adapt56); + +extern int isdnhdlc_encode (struct isdnhdlc_vars *hdlc,const unsigned char *src,unsigned short slen,int *count, + unsigned char *dst,int dsize); + +#endif /* __ISDNHDLC_H__ */ -- cgit v1.2.3 From 6bd4bcd3cd8affc09eaee7efbc037f65f4a71501 Mon Sep 17 00:00:00 2001 From: Karsten Keil Date: Wed, 8 Jul 2009 19:11:09 +0200 Subject: ISDN: Clean up isdnhdlc code Clean up isdnhdlc to meet current code standard. Remove hint to already removed bit reversal table. Signed-off-by: Karsten Keil --- include/linux/isdn/hdlc.h | 68 ++++++++++++++++++++++++++--------------------- 1 file changed, 37 insertions(+), 31 deletions(-) (limited to 'include/linux') diff --git a/include/linux/isdn/hdlc.h b/include/linux/isdn/hdlc.h index cf0a95a24015..8f3540c7f692 100644 --- a/include/linux/isdn/hdlc.h +++ b/include/linux/isdn/hdlc.h @@ -1,27 +1,28 @@ /* - * isdnhdlc.h -- General purpose ISDN HDLC decoder. + * hdlc.h -- General purpose ISDN HDLC decoder. * * Implementation of a HDLC decoder/encoder in software. * Neccessary because some ISDN devices don't have HDLC - * controllers. Also included: a bit reversal table. + * controllers. * - *Copyright (C) 2002 Wolfgang Mües - * 2001 Frode Isaksen - * 2001 Kai Germaschewski + * Copyright (C) + * 2002 Wolfgang Mües + * 2001 Frode Isaksen + * 2001 Kai Germaschewski * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef __ISDNHDLC_H__ @@ -31,20 +32,24 @@ struct isdnhdlc_vars { int bit_shift; int hdlc_bits1; int data_bits; - int ffbit_shift; // encoding only + int ffbit_shift; /* encoding only */ int state; int dstpos; - unsigned short crc; + u16 crc; - unsigned char cbin; - unsigned char shift_reg; - unsigned char ffvalue; + u8 cbin; + u8 shift_reg; + u8 ffvalue; - unsigned int data_received:1; // set if transferring data - unsigned int dchannel:1; // set if D channel (send idle instead of flags) - unsigned int do_adapt56:1; // set if 56K adaptation - unsigned int do_closing:1; // set if in closing phase (need to send CRC + flag + /* set if transferring data */ + u32 data_received:1; + /* set if D channel (send idle instead of flags) */ + u32 dchannel:1; + /* set if 56K adaptation */ + u32 do_adapt56:1; + /* set if in closing phase (need to send CRC + flag) */ + u32 do_closing:1; }; @@ -57,14 +62,15 @@ struct isdnhdlc_vars { #define HDLC_CRC_ERROR 2 #define HDLC_LENGTH_ERROR 3 -extern void isdnhdlc_rcv_init (struct isdnhdlc_vars *hdlc, int do_adapt56); +extern void isdnhdlc_rcv_init(struct isdnhdlc_vars *hdlc, int do_adapt56); -extern int isdnhdlc_decode (struct isdnhdlc_vars *hdlc, const unsigned char *src, int slen,int *count, - unsigned char *dst, int dsize); +extern int isdnhdlc_decode(struct isdnhdlc_vars *hdlc, const u8 *src, + int slen, int *count, u8 *dst, int dsize); -extern void isdnhdlc_out_init (struct isdnhdlc_vars *hdlc,int is_d_channel,int do_adapt56); +extern void isdnhdlc_out_init(struct isdnhdlc_vars *hdlc, int is_d_channel, + int do_adapt56); -extern int isdnhdlc_encode (struct isdnhdlc_vars *hdlc,const unsigned char *src,unsigned short slen,int *count, - unsigned char *dst,int dsize); +extern int isdnhdlc_encode(struct isdnhdlc_vars *hdlc, const u8 *src, + u16 slen, int *count, u8 *dst, int dsize); #endif /* __ISDNHDLC_H__ */ -- cgit v1.2.3 From c38fc3bc2ecddd4f5278131603e6964cbed071b2 Mon Sep 17 00:00:00 2001 From: Karsten Keil Date: Wed, 8 Jul 2009 20:31:42 +0200 Subject: ISDN: Add support for none reverse bitstreams to isdnhdc The original isdnhdlc code was developed for devices which had reversed bitorder in the byte stream. Adding code to handle normal bitstreams as well. Signed-off-by: Karsten Keil --- include/linux/isdn/hdlc.h | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/isdn/hdlc.h b/include/linux/isdn/hdlc.h index 8f3540c7f692..4b3ecc40889a 100644 --- a/include/linux/isdn/hdlc.h +++ b/include/linux/isdn/hdlc.h @@ -6,6 +6,7 @@ * controllers. * * Copyright (C) + * 2009 Karsten Keil * 2002 Wolfgang Mües * 2001 Frode Isaksen * 2001 Kai Germaschewski @@ -50,8 +51,14 @@ struct isdnhdlc_vars { u32 do_adapt56:1; /* set if in closing phase (need to send CRC + flag) */ u32 do_closing:1; + /* set if data is bitreverse */ + u32 do_bitreverse:1; }; +/* Feature Flags */ +#define HDLC_56KBIT 0x01 +#define HDLC_DCHANNEL 0x02 +#define HDLC_BITREVERSE 0x04 /* The return value from isdnhdlc_decode is @@ -62,13 +69,12 @@ struct isdnhdlc_vars { #define HDLC_CRC_ERROR 2 #define HDLC_LENGTH_ERROR 3 -extern void isdnhdlc_rcv_init(struct isdnhdlc_vars *hdlc, int do_adapt56); +extern void isdnhdlc_rcv_init(struct isdnhdlc_vars *hdlc, u32 features); extern int isdnhdlc_decode(struct isdnhdlc_vars *hdlc, const u8 *src, int slen, int *count, u8 *dst, int dsize); -extern void isdnhdlc_out_init(struct isdnhdlc_vars *hdlc, int is_d_channel, - int do_adapt56); +extern void isdnhdlc_out_init(struct isdnhdlc_vars *hdlc, u32 features); extern int isdnhdlc_encode(struct isdnhdlc_vars *hdlc, const u8 *src, u16 slen, int *count, u8 *dst, int dsize); -- cgit v1.2.3 From fb286f0471a04ef646c8e5c79750ae6718183745 Mon Sep 17 00:00:00 2001 From: Karsten Keil Date: Thu, 9 Jul 2009 10:02:29 +0200 Subject: mISDN: Make clearing B-channel a common function Clearing B-channel is needed in every driver, so it makes sense to have it as common function. Signed-off-by: Karsten Keil --- include/linux/mISDNhw.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mISDNhw.h b/include/linux/mISDNhw.h index 7f9831da847f..4af841408fb5 100644 --- a/include/linux/mISDNhw.h +++ b/include/linux/mISDNhw.h @@ -168,6 +168,7 @@ struct bchannel { extern int mISDN_initdchannel(struct dchannel *, int, void *); extern int mISDN_initbchannel(struct bchannel *, int); extern int mISDN_freedchannel(struct dchannel *); +extern void mISDN_clear_bchannel(struct bchannel *); extern int mISDN_freebchannel(struct bchannel *); extern void queue_ch_frame(struct mISDNchannel *, u_int, int, struct sk_buff *); -- cgit v1.2.3 From da2272c91ae81b41ae6fa6ebdc767a6cef73b770 Mon Sep 17 00:00:00 2001 From: Karsten Keil Date: Wed, 22 Jul 2009 20:01:59 +0200 Subject: mISDN: Add support for Speedfax+ cards Add support for the Siemens ISAR DSP chip and cards based on it, including analog modem protocols. Signed-off-by: Karsten Keil --- include/linux/mISDNif.h | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mISDNif.h b/include/linux/mISDNif.h index 45100b39a7cf..536ca12442ca 100644 --- a/include/linux/mISDNif.h +++ b/include/linux/mISDNif.h @@ -37,7 +37,7 @@ */ #define MISDN_MAJOR_VERSION 1 #define MISDN_MINOR_VERSION 1 -#define MISDN_RELEASE 20 +#define MISDN_RELEASE 21 /* primitives for information exchange * generell format @@ -153,6 +153,18 @@ #define HFC_VOL_CHANGE_RX 0x2602 #define HFC_SPL_LOOP_ON 0x2603 #define HFC_SPL_LOOP_OFF 0x2604 +/* for T30 FAX and analog modem */ +#define HW_MOD_FRM 0x4000 +#define HW_MOD_FRH 0x4001 +#define HW_MOD_FTM 0x4002 +#define HW_MOD_FTH 0x4003 +#define HW_MOD_FTS 0x4004 +#define HW_MOD_CONNECT 0x4010 +#define HW_MOD_OK 0x4011 +#define HW_MOD_NOCARR 0x4012 +#define HW_MOD_FCERROR 0x4013 +#define HW_MOD_READY 0x4014 +#define HW_MOD_LASTDATA 0x4015 /* DSP_TONE_PATT_ON parameter */ #define TONE_OFF 0x0000 @@ -224,6 +236,8 @@ #define ISDN_P_B_L2DTMF 0x24 #define ISDN_P_B_L2DSP 0x25 #define ISDN_P_B_L2DSPHDLC 0x26 +#define ISDN_P_B_T30_FAX 0x27 +#define ISDN_P_B_MODEM_ASYNC 0x28 #define OPTION_L2_PMX 1 #define OPTION_L2_PTP 2 -- cgit v1.2.3 From 633aae23ff31bef692a70772652e753a0ae59b81 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 22 Jul 2009 21:51:36 -0700 Subject: Input: serio - switch to using dev_pm_ops Signed-off-by: Dmitry Torokhov --- include/linux/serio.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/serio.h b/include/linux/serio.h index 126d24c9eaa8..a640bc2afe76 100644 --- a/include/linux/serio.h +++ b/include/linux/serio.h @@ -31,8 +31,6 @@ struct serio { bool manual_bind; bool registered; /* port has been fully registered with driver core */ - bool suspended; /* port is suspended */ - struct serio_device_id id; -- cgit v1.2.3 From b5eb0589937eae2d58fca17fa45ed44152e772ed Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 15 Jul 2009 05:23:23 +0000 Subject: net: deprecate print_mac We've had %pM for long enough now, time to deprecate print_mac() and remove the __maybe_unused attribute from DECLARE_MAC_BUF so that variables declared with that can be found and removed. Otherwise people are putting in new users of print_mac(). Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- include/linux/if_ether.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h index 70fdba2bbf71..580b6004d00e 100644 --- a/include/linux/if_ether.h +++ b/include/linux/if_ether.h @@ -139,10 +139,10 @@ extern ssize_t sysfs_format_mac(char *buf, const unsigned char *addr, int len); /* * Display a 6 byte device address (MAC) in a readable format. */ -extern char *print_mac(char *buf, const unsigned char *addr); +extern char *print_mac(char *buf, const unsigned char *addr) __deprecated; #define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x" #define MAC_BUF_SIZE 18 -#define DECLARE_MAC_BUF(var) char var[MAC_BUF_SIZE] __maybe_unused +#define DECLARE_MAC_BUF(var) char var[MAC_BUF_SIZE] #endif -- cgit v1.2.3 From 51def0bea92629dff02ff1de40603eb90c609c55 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Wed, 22 Jul 2009 14:06:56 +0000 Subject: imwc3200: move iwmc3200 SDIO ids to sdio_ids.h 1. add intel's sdio vendor id to sdio_ids.h 2. move iwmc3200 sdio devices' ids to sdio_ids.h Signed-off-by: Tomas Winkler Signed-off-by: David S. Miller --- include/linux/mmc/sdio_ids.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h index 39751c8cde9c..2dbfb5a05994 100644 --- a/include/linux/mmc/sdio_ids.h +++ b/include/linux/mmc/sdio_ids.h @@ -22,6 +22,12 @@ /* * Vendors and devices. Sort key: vendor first, device next. */ +#define SDIO_VENDOR_ID_INTEL 0x0089 +#define SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX 0x1402 +#define SDIO_DEVICE_ID_INTEL_IWMC3200WIFI 0x1403 +#define SDIO_DEVICE_ID_INTEL_IWMC3200TOP 0x1404 +#define SDIO_DEVICE_ID_INTEL_IWMC3200GPS 0x1405 +#define SDIO_DEVICE_ID_INTEL_IWMC3200BT 0x1406 #define SDIO_VENDOR_ID_MARVELL 0x02df #define SDIO_DEVICE_ID_MARVELL_LIBERTAS 0x9103 -- cgit v1.2.3 From 8a729fce76f7af50d8b622f2fb26adce9c8df743 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 26 Jul 2009 23:18:11 +0000 Subject: net: ethtool_op_get_rx_csum() should be public and exported Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/ethtool.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index 9b660bd2e2b3..90c4a3616d94 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -368,6 +368,7 @@ struct net_device; /* Some generic methods drivers may use in their ethtool_ops */ u32 ethtool_op_get_link(struct net_device *dev); +u32 ethtool_op_get_rx_csum(struct net_device *dev); u32 ethtool_op_get_tx_csum(struct net_device *dev); int ethtool_op_set_tx_csum(struct net_device *dev, u32 data); int ethtool_op_set_tx_hw_csum(struct net_device *dev, u32 data); -- cgit v1.2.3 From 463d018323851a608eef52a9427b0585005c647f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 14 Jul 2009 00:33:35 +0200 Subject: cfg80211: make aware of net namespaces In order to make cfg80211/nl80211 aware of network namespaces, we have to do the following things: * del_virtual_intf method takes an interface index rather than a netdev pointer - simply change this * nl80211 uses init_net a lot, it changes to use the sender's network namespace * scan requests use the interface index, hold a netdev pointer and reference instead * we want a wiphy and its associated virtual interfaces to be in one netns together, so - we need to be able to change ns for a given interface, so export dev_change_net_namespace() - for each virtual interface set the NETIF_F_NETNS_LOCAL flag, and clear that flag only when the wiphy changes ns, to disallow breaking this invariant * when a network namespace goes away, we need to reparent the wiphy to init_net * cfg80211 users that support creating virtual interfaces must create them in the wiphy's namespace, currently this affects only mac80211 The end result is that you can now switch an entire wiphy into a different network namespace with the new command iw phy# set netns and all virtual interfaces will follow (or the operation fails). Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 962e2232a074..cb3dc6027fd9 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -262,6 +262,9 @@ * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and * %NL80211_ATTR_REASON_CODE attributes are used. * + * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices + * associated with this wiphy must be down and will follow. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -336,6 +339,8 @@ enum nl80211_commands { NL80211_CMD_ROAM, NL80211_CMD_DISCONNECT, + NL80211_CMD_SET_WIPHY_NETNS, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -573,6 +578,8 @@ enum nl80211_commands { * and join_ibss(), key information is in a nested attribute each * with %NL80211_KEY_* sub-attributes * + * @NL80211_ATTR_PID: Process ID of a network namespace. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -701,6 +708,8 @@ enum nl80211_attrs { NL80211_ATTR_KEY, NL80211_ATTR_KEYS, + NL80211_ATTR_PID, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.3 From d1eba248469272ae0618288bccf65b24d017f1d2 Mon Sep 17 00:00:00 2001 From: Sujith Date: Thu, 23 Jul 2009 15:31:31 +0530 Subject: mac80211: Add a few 802.11n defines for AMPDU parameters Signed-off-by: Sujith Acked-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 23343ab0bb03..21556a2d9e7e 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -802,6 +802,31 @@ struct ieee80211_ht_cap { #define IEEE80211_HT_AMPDU_PARM_FACTOR 0x03 #define IEEE80211_HT_AMPDU_PARM_DENSITY 0x1C +/* + * Maximum length of AMPDU that the STA can receive. + * Length = 2 ^ (13 + max_ampdu_length_exp) - 1 (octets) + */ +enum ieee80211_max_ampdu_length_exp { + IEEE80211_HT_MAX_AMPDU_8K = 0, + IEEE80211_HT_MAX_AMPDU_16K = 1, + IEEE80211_HT_MAX_AMPDU_32K = 2, + IEEE80211_HT_MAX_AMPDU_64K = 3 +}; + +#define IEEE80211_HT_MAX_AMPDU_FACTOR 13 + +/* Minimum MPDU start spacing */ +enum ieee80211_min_mpdu_spacing { + IEEE80211_HT_MPDU_DENSITY_NONE = 0, /* No restriction */ + IEEE80211_HT_MPDU_DENSITY_0_25 = 1, /* 1/4 usec */ + IEEE80211_HT_MPDU_DENSITY_0_5 = 2, /* 1/2 usec */ + IEEE80211_HT_MPDU_DENSITY_1 = 3, /* 1 usec */ + IEEE80211_HT_MPDU_DENSITY_2 = 4, /* 2 usec */ + IEEE80211_HT_MPDU_DENSITY_4 = 5, /* 4 usec */ + IEEE80211_HT_MPDU_DENSITY_8 = 6, /* 8 usec */ + IEEE80211_HT_MPDU_DENSITY_16 = 7 /* 16 usec */ +}; + /** * struct ieee80211_ht_info - HT information * -- cgit v1.2.3 From 0c193054a4c1cf190d2f23e5e91bd14402e43912 Mon Sep 17 00:00:00 2001 From: Andy Adamson Date: Mon, 27 Jul 2009 19:09:19 -0400 Subject: nfsd41: hange from page to memory based drc limits NFSD_SLOT_CACHE_SIZE is the size of all encoded operation responses (excluding the sequence operation) that we want to cache. For now, keep NFSD_SLOT_CACHE_SIZE at PAGE_SIZE. It will be reduced when the DRC is changed from page based to memory based. Signed-off-by: Andy Adamson Signed-off-by: J. Bruce Fields --- include/linux/nfsd/nfsd.h | 4 ++-- include/linux/nfsd/state.h | 1 + 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nfsd/nfsd.h b/include/linux/nfsd/nfsd.h index 2571f856908f..2812ed52669d 100644 --- a/include/linux/nfsd/nfsd.h +++ b/include/linux/nfsd/nfsd.h @@ -57,8 +57,8 @@ extern u32 nfsd_supported_minorversion; extern struct mutex nfsd_mutex; extern struct svc_serv *nfsd_serv; extern spinlock_t nfsd_drc_lock; -extern unsigned int nfsd_drc_max_pages; -extern unsigned int nfsd_drc_pages_used; +extern unsigned int nfsd_drc_max_mem; +extern unsigned int nfsd_drc_mem_used; extern struct seq_operations nfs_exports_op; diff --git a/include/linux/nfsd/state.h b/include/linux/nfsd/state.h index 57ab2ed08459..a6c87d623891 100644 --- a/include/linux/nfsd/state.h +++ b/include/linux/nfsd/state.h @@ -96,6 +96,7 @@ struct nfs4_cb_conn { #define NFSD_MAX_SLOTS_PER_SESSION 128 /* Maximum number of pages per slot cache entry */ #define NFSD_PAGES_PER_SLOT 1 +#define NFSD_SLOT_CACHE_SIZE PAGE_SIZE /* Maximum number of operations per session compound */ #define NFSD_MAX_OPS_PER_COMPOUND 16 -- cgit v1.2.3 From 49557cc74c7bdf6a984be227ead9a84b3a26f053 Mon Sep 17 00:00:00 2001 From: Andy Adamson Date: Thu, 23 Jul 2009 19:02:16 -0400 Subject: nfsd41: Use separate DRC for setclientid Instead of trying to share the generic 4.1 reply cache code for the CREATE_SESSION reply cache, it's simpler to handle CREATE_SESSION separately. The nfs41 single slot clientid DRC holds the results of create session processing. CREATE_SESSION can be preceeded by a SEQUENCE operation (an embedded CREATE_SESSION) and the create session single slot cache must be maintained. nfsd4_replay_cache_entry() and nfsd4_store_cache_entry() do not implement the replay of an embedded CREATE_SESSION. The clientid DRC slot does not need the inuse, cachethis or other fields that the multiple slot session cache uses. Replace the clientid DRC cache struct nfs4_slot cache with a new nfsd4_clid_slot cache. Save the xdr struct nfsd4_create_session into the cache at the end of processing, and on a replay, replace the struct for the replay request with the cached version all while under the state lock. nfsd4_proc_compound will handle both the solo and embedded CREATE_SESSION case via the normal use of encode_operation. Errors that do not change the create session cache: A create session NFS4ERR_STALE_CLIENTID error means that a client record (and associated create session slot) could not be found and therefore can't be changed. NFSERR_SEQ_MISORDERED errors do not change the slot cache. All other errors get cached. Remove the clientid DRC specific check in nfs4svc_encode_compoundres to put the session only if cstate.session is set which will now always be true. Signed-off-by: Andy Adamson Signed-off-by: J. Bruce Fields --- include/linux/nfsd/state.h | 21 ++++++++++++++++++++- include/linux/nfsd/xdr4.h | 12 ------------ 2 files changed, 20 insertions(+), 13 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nfsd/state.h b/include/linux/nfsd/state.h index a6c87d623891..58bb19784e12 100644 --- a/include/linux/nfsd/state.h +++ b/include/linux/nfsd/state.h @@ -127,6 +127,25 @@ struct nfsd4_channel_attrs { u32 rdma_attrs; }; +struct nfsd4_create_session { + clientid_t clientid; + struct nfs4_sessionid sessionid; + u32 seqid; + u32 flags; + struct nfsd4_channel_attrs fore_channel; + struct nfsd4_channel_attrs back_channel; + u32 callback_prog; + u32 uid; + u32 gid; +}; + +/* The single slot clientid cache structure */ +struct nfsd4_clid_slot { + u32 sl_seqid; + __be32 sl_status; + struct nfsd4_create_session sl_cr_ses; +}; + struct nfsd4_session { struct kref se_ref; struct list_head se_hash; /* hash by sessionid */ @@ -193,7 +212,7 @@ struct nfs4_client { /* for nfs41 */ struct list_head cl_sessions; - struct nfsd4_slot cl_slot; /* create_session slot */ + struct nfsd4_clid_slot cl_cs_slot; /* create_session slot */ u32 cl_exchange_flags; struct nfs4_sessionid cl_sessionid; }; diff --git a/include/linux/nfsd/xdr4.h b/include/linux/nfsd/xdr4.h index 2bacf7535069..5e4beb0deb80 100644 --- a/include/linux/nfsd/xdr4.h +++ b/include/linux/nfsd/xdr4.h @@ -366,18 +366,6 @@ struct nfsd4_exchange_id { int spa_how; }; -struct nfsd4_create_session { - clientid_t clientid; - struct nfs4_sessionid sessionid; - u32 seqid; - u32 flags; - struct nfsd4_channel_attrs fore_channel; - struct nfsd4_channel_attrs back_channel; - u32 callback_prog; - u32 uid; - u32 gid; -}; - struct nfsd4_sequence { struct nfs4_sessionid sessionid; /* request/response */ u32 seqid; /* request/response */ -- cgit v1.2.3 From e5f5ccb646bc6009572b5c23201b5e81638ff150 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 23 Jul 2009 20:35:53 +0200 Subject: power_supply: get_by_name and set_charged functionality This adds a function that indicates that a battery is fully charged. It also includes functions to get a power_supply device from the class of registered devices by name reference. These can be used to find a specific battery to call power_supply_set_battery_charged() on. Some battery drivers might need this information to calibrate themselves. Signed-off-by: Daniel Mack Cc: Ian Molton Cc: Anton Vorontsov Cc: Matt Reimer Signed-off-by: Anton Vorontsov --- include/linux/power_supply.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index 4c7c6fc35487..b5d096d3a9be 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -144,6 +144,7 @@ struct power_supply { enum power_supply_property psp, union power_supply_propval *val); void (*external_power_changed)(struct power_supply *psy); + void (*set_charged)(struct power_supply *psy); /* For APM emulation, think legacy userspace. */ int use_for_apm; @@ -183,8 +184,10 @@ struct power_supply_info { int use_for_apm; }; +extern struct power_supply *power_supply_get_by_name(char *name); extern void power_supply_changed(struct power_supply *psy); extern int power_supply_am_i_supplied(struct power_supply *psy); +extern int power_supply_set_battery_charged(struct power_supply *psy); #if defined(CONFIG_POWER_SUPPLY) || defined(CONFIG_POWER_SUPPLY_MODULE) extern int power_supply_is_system_supplied(void); -- cgit v1.2.3 From 78ddb2785980fc01b129c3547463266cae9c6ca9 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 30 Jul 2009 23:23:34 +0100 Subject: ARM: PL093: Header file for PL093 SSMC PrimeCell Header to define the standard registers for an PL093 SSMC memory controller. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks --- include/linux/amba/pl093.h | 80 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 80 insertions(+) create mode 100644 include/linux/amba/pl093.h (limited to 'include/linux') diff --git a/include/linux/amba/pl093.h b/include/linux/amba/pl093.h new file mode 100644 index 000000000000..2983e3671adb --- /dev/null +++ b/include/linux/amba/pl093.h @@ -0,0 +1,80 @@ +/* linux/amba/pl093.h + * + * Copyright (c) 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * AMBA PL093 SSMC (synchronous static memory controller) + * See DDI0236.pdf (r0p4) for more details + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define SMB_BANK(x) ((x) * 0x20) /* each bank control set is 0x20 apart */ + +/* Offsets for SMBxxxxRy registers */ + +#define SMBIDCYR (0x00) +#define SMBWSTRDR (0x04) +#define SMBWSTWRR (0x08) +#define SMBWSTOENR (0x0C) +#define SMBWSTWENR (0x10) +#define SMBCR (0x14) +#define SMBSR (0x18) +#define SMBWSTBRDR (0x1C) + +/* Masks for SMB registers */ +#define IDCY_MASK (0xf) +#define WSTRD_MASK (0xf) +#define WSTWR_MASK (0xf) +#define WSTOEN_MASK (0xf) +#define WSTWEN_MASK (0xf) + +/* Notes from datasheet: + * WSTOEN <= WSTRD + * WSTWEN <= WSTWR + * + * WSTOEN is not used with nWAIT + */ + +/* SMBCR bit definitions */ +#define SMBCR_BIWRITEEN (1 << 21) +#define SMBCR_ADDRVALIDWRITEEN (1 << 20) +#define SMBCR_SYNCWRITE (1 << 17) +#define SMBCR_BMWRITE (1 << 16) +#define SMBCR_WRAPREAD (1 << 14) +#define SMBCR_BIREADEN (1 << 13) +#define SMBCR_ADDRVALIDREADEN (1 << 12) +#define SMBCR_SYNCREAD (1 << 9) +#define SMBCR_BMREAD (1 << 8) +#define SMBCR_SMBLSPOL (1 << 6) +#define SMBCR_WP (1 << 3) +#define SMBCR_WAITEN (1 << 2) +#define SMBCR_WAITPOL (1 << 1) +#define SMBCR_RBLE (1 << 0) + +#define SMBCR_BURSTLENWRITE_MASK (3 << 18) +#define SMBCR_BURSTLENWRITE_4 (0 << 18) +#define SMBCR_BURSTLENWRITE_8 (1 << 18) +#define SMBCR_BURSTLENWRITE_RESERVED (2 << 18) +#define SMBCR_BURSTLENWRITE_CONTINUOUS (3 << 18) + +#define SMBCR_BURSTLENREAD_MASK (3 << 10) +#define SMBCR_BURSTLENREAD_4 (0 << 10) +#define SMBCR_BURSTLENREAD_8 (1 << 10) +#define SMBCR_BURSTLENREAD_16 (2 << 10) +#define SMBCR_BURSTLENREAD_CONTINUOUS (3 << 10) + +#define SMBCR_MW_MASK (3 << 4) +#define SMBCR_MW_8BIT (0 << 4) +#define SMBCR_MW_16BIT (1 << 4) +#define SMBCR_MW_M32BIT (2 << 4) + +/* SSMC status registers */ +#define SSMCCSR (0x200) +#define SSMCCR (0x204) +#define SSMCITCR (0x208) +#define SSMCITIP (0x20C) +#define SSMCITIOP (0x210) -- cgit v1.2.3 From ff663cf8705bea101d5f73cf471855c85242575e Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Thu, 23 Jul 2009 17:25:49 +0100 Subject: agp: Add generic support for graphics dma remapping New driver hooks for support graphics memory dma remapping are introduced in this patch. It makes generic code can tell if current device needs dma remapping, then call driver provided interfaces for mapping and unmapping. Change has also been made to handle scratch_page in remapping case. Signed-off-by: Zhenyu Wang Signed-off-by: David Woodhouse --- include/linux/agp_backend.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/agp_backend.h b/include/linux/agp_backend.h index 76fa794fdac0..8a294d65b9b1 100644 --- a/include/linux/agp_backend.h +++ b/include/linux/agp_backend.h @@ -79,9 +79,13 @@ struct agp_memory { u32 physical; bool is_bound; bool is_flushed; - bool vmalloc_flag; + bool vmalloc_flag; + bool sg_vmalloc_flag; /* list of agp_memory mapped to the aperture */ struct list_head mapped_list; + /* DMA-mapped addresses */ + struct scatterlist *sg_list; + int num_sg; }; #define AGP_NORMAL_MEMORY 0 -- cgit v1.2.3 From f692775d7e0a22477143cd884e45c955448ac7d2 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Wed, 29 Jul 2009 09:28:45 +0100 Subject: intel-agp: fix sglist allocation to avoid vmalloc() Signed-off-by: David Woodhouse --- include/linux/agp_backend.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/agp_backend.h b/include/linux/agp_backend.h index 8a294d65b9b1..880130f7311f 100644 --- a/include/linux/agp_backend.h +++ b/include/linux/agp_backend.h @@ -80,7 +80,6 @@ struct agp_memory { bool is_bound; bool is_flushed; bool vmalloc_flag; - bool sg_vmalloc_flag; /* list of agp_memory mapped to the aperture */ struct list_head mapped_list; /* DMA-mapped addresses */ -- cgit v1.2.3 From 42c4ab41a176ee784c0f28c0b29025a8fc34f05a Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 29 Jul 2009 12:15:26 +0200 Subject: itimers: Merge ITIMER_VIRT and ITIMER_PROF Both cpu itimers have same data flow in the few places, this patch make unification of code related with VIRT and PROF itimers. Signed-off-by: Stanislaw Gruszka Acked-by: Peter Zijlstra Acked-by: Thomas Gleixner Cc: Oleg Nesterov Cc: Andrew Morton Cc: Paul Mackerras Cc: Benjamin Herrenschmidt LKML-Reference: <1248862529-6063-2-git-send-email-sgruszka@redhat.com> Signed-off-by: Ingo Molnar --- include/linux/sched.h | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 3ab08e4bb6b8..3b3efaddd953 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -470,6 +470,11 @@ struct pacct_struct { unsigned long ac_minflt, ac_majflt; }; +struct cpu_itimer { + cputime_t expires; + cputime_t incr; +}; + /** * struct task_cputime - collected CPU time counts * @utime: time spent in user mode, in &cputime_t units @@ -564,9 +569,12 @@ struct signal_struct { struct pid *leader_pid; ktime_t it_real_incr; - /* ITIMER_PROF and ITIMER_VIRTUAL timers for the process */ - cputime_t it_prof_expires, it_virt_expires; - cputime_t it_prof_incr, it_virt_incr; + /* + * ITIMER_PROF and ITIMER_VIRTUAL timers for the process, we use + * CPUCLOCK_PROF and CPUCLOCK_VIRT for indexing array as these + * values are defined to 0 and 1 respectively + */ + struct cpu_itimer it[2]; /* * Thread group totals for process CPU timers. -- cgit v1.2.3 From 8356b5f9c424e5831715abbce747197c30d1fd71 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 29 Jul 2009 12:15:27 +0200 Subject: itimers: Fix periodic tics precision Measure ITIMER_PROF and ITIMER_VIRT timers interval error between real ticks and requested by user. Take it into account when scheduling next tick. This patch introduce possibility where time between two consecutive tics is smaller then requested interval, it preserve however dependency that n tick is generated not earlier than n*interval time - counting from the beginning of periodic signal generation. Signed-off-by: Stanislaw Gruszka Acked-by: Peter Zijlstra Acked-by: Thomas Gleixner Cc: Oleg Nesterov Cc: Andrew Morton Cc: Paul Mackerras Cc: Benjamin Herrenschmidt LKML-Reference: <1248862529-6063-3-git-send-email-sgruszka@redhat.com> Signed-off-by: Ingo Molnar --- include/linux/sched.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 3b3efaddd953..a069e65e8bb7 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -473,6 +473,8 @@ struct pacct_struct { struct cpu_itimer { cputime_t expires; cputime_t incr; + u32 error; + u32 incr_error; }; /** -- cgit v1.2.3 From 3e352aa8ee2bd48f1a19c7742810b3a4a7ba605e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 3 Aug 2009 14:10:11 +0900 Subject: x86, percpu: Fix DECLARE/DEFINE_PER_CPU_PAGE_ALIGNED() DECLARE/DEFINE_PER_CPU_PAGE_ALIGNED() put percpu variables in .page_aligned section without adding any alignment restrictions. Currently, this doesn't cause any problem because all users of the macros have explicit page alignment and page-sized but it's much safer to enforce page alignment from the macros. After all, it's what they claim to do. Add __aligned(PAGE_SIZE) to DECLARE/DEFINE_PER_CPU_PAGE_ALIGNED() and drop explicit alignment from it users. Signed-off-by: Tejun Heo Cc: Ingo Molnar Signed-off-by: H. Peter Anvin --- include/linux/percpu-defs.h | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/percpu-defs.h b/include/linux/percpu-defs.h index 68438e18fff4..afd5f8b7061f 100644 --- a/include/linux/percpu-defs.h +++ b/include/linux/percpu-defs.h @@ -69,11 +69,13 @@ /* * Declaration/definition used for per-CPU variables that must be page aligned. */ -#define DECLARE_PER_CPU_PAGE_ALIGNED(type, name) \ - DECLARE_PER_CPU_SECTION(type, name, ".page_aligned") +#define DECLARE_PER_CPU_PAGE_ALIGNED(type, name) \ + DECLARE_PER_CPU_SECTION(type, name, ".page_aligned") \ + __aligned(PAGE_SIZE) #define DEFINE_PER_CPU_PAGE_ALIGNED(type, name) \ - DEFINE_PER_CPU_SECTION(type, name, ".page_aligned") + DEFINE_PER_CPU_SECTION(type, name, ".page_aligned") \ + __aligned(PAGE_SIZE) /* * Intermodule exports for per-CPU variables. -- cgit v1.2.3 From 1487cd5e76337555737cbc55d7d83f41460d198f Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Thu, 30 Jul 2009 19:41:20 +0300 Subject: usbnet: allow "minidriver" to prevent urb unlinking on usbnet_stop rndis_wlan devices freeze after running usbnet_stop several times. It appears that firmware freezes in state where it does not respond to any RNDIS commands and device have to be physically unplugged/replugged. This patch lets minidrivers to disable unlink_urbs on usbnet_stop through new info flag. Signed-off-by: Jussi Kivilinna Cc: David Brownell Signed-off-by: John W. Linville --- include/linux/usb/usbnet.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index 7c17b2efba86..c642f78dd9cf 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -86,6 +86,7 @@ struct driver_info { #define FLAG_FRAMING_AX 0x0040 /* AX88772/178 packets */ #define FLAG_WLAN 0x0080 /* use "wlan%d" names */ +#define FLAG_AVOID_UNLINK_URBS 0x0100 /* don't unlink urbs at usbnet_stop() */ /* init device ... can sleep, or cause probe() failure */ -- cgit v1.2.3 From 2a4901bcbe9c122bd56e1f6c337fcb4ad75fafb7 Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Thu, 30 Jul 2009 19:41:52 +0300 Subject: rndis_host: allow rndis_wlan to see all indications Allow rndis_wlan to see all indications. Currently rndis_host lets rndis_wlan to know about link state changes only, but there is whole set of other 802.11-specific indications that rndis_wlan should handle properly. So rename link_change() to indication() and convert rndis_wlan to use it. Signed-off-by: Jussi Kivilinna Cc: David Brownell Signed-off-by: John W. Linville --- include/linux/usb/usbnet.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index c642f78dd9cf..de8b4b18961b 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -122,9 +122,8 @@ struct driver_info { * right after minidriver have initialized hardware. */ int (*early_init)(struct usbnet *dev); - /* called by minidriver when link state changes, state: 0=disconnect, - * 1=connect */ - void (*link_change)(struct usbnet *dev, int state); + /* called by minidriver when receiving indication */ + void (*indication)(struct usbnet *dev, void *ind, int indlen); /* for new devices, use the descriptor-reading code instead */ int in; /* rx endpoint */ -- cgit v1.2.3 From 030645aceb3d9f10b1c3d2231c50f5a8bb3a9667 Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Thu, 30 Jul 2009 19:41:58 +0300 Subject: rndis_wlan: handle 802.11 indications from device Add handling for 802.11 specific rndis indications. Signed-off-by: Jussi Kivilinna Signed-off-by: John W. Linville --- include/linux/usb/rndis_host.h | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/rndis_host.h b/include/linux/usb/rndis_host.h index 37836b937d97..1ef1ebc2b04f 100644 --- a/include/linux/usb/rndis_host.h +++ b/include/linux/usb/rndis_host.h @@ -70,12 +70,13 @@ struct rndis_msg_hdr { #define RNDIS_MSG_KEEPALIVE_C (RNDIS_MSG_KEEPALIVE|RNDIS_MSG_COMPLETION) /* codes for "status" field of completion messages */ -#define RNDIS_STATUS_SUCCESS cpu_to_le32(0x00000000) -#define RNDIS_STATUS_FAILURE cpu_to_le32(0xc0000001) -#define RNDIS_STATUS_INVALID_DATA cpu_to_le32(0xc0010015) -#define RNDIS_STATUS_NOT_SUPPORTED cpu_to_le32(0xc00000bb) -#define RNDIS_STATUS_MEDIA_CONNECT cpu_to_le32(0x4001000b) -#define RNDIS_STATUS_MEDIA_DISCONNECT cpu_to_le32(0x4001000c) +#define RNDIS_STATUS_SUCCESS cpu_to_le32(0x00000000) +#define RNDIS_STATUS_FAILURE cpu_to_le32(0xc0000001) +#define RNDIS_STATUS_INVALID_DATA cpu_to_le32(0xc0010015) +#define RNDIS_STATUS_NOT_SUPPORTED cpu_to_le32(0xc00000bb) +#define RNDIS_STATUS_MEDIA_CONNECT cpu_to_le32(0x4001000b) +#define RNDIS_STATUS_MEDIA_DISCONNECT cpu_to_le32(0x4001000c) +#define RNDIS_STATUS_MEDIA_SPECIFIC_INDICATION cpu_to_le32(0x40010012) /* codes for OID_GEN_PHYSICAL_MEDIUM */ #define RNDIS_PHYSICAL_MEDIUM_UNSPECIFIED cpu_to_le32(0x00000000) -- cgit v1.2.3 From 3ad201496badddd8e1cda87ee6d29e8b3b8e1279 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Sun, 2 Aug 2009 02:36:49 +0300 Subject: rfkill: add the GPS radio type Althoug GPS is a technology w/o transmitting radio and thus not a primary candidate for rfkill switch, rfkill gives unified interface point for devices with wireless technology. The input key is not supplied as it is too be deprecated. Cc: johannes@sipsolutions.net Signed-off-by: Tomas Winkler Acked-by: Marcel Holtmann Signed-off-by: John W. Linville --- include/linux/rfkill.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index 10202903141a..21ca51bf4dd2 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -47,6 +47,7 @@ enum rfkill_type { RFKILL_TYPE_UWB, RFKILL_TYPE_WIMAX, RFKILL_TYPE_WWAN, + RFKILL_TYPE_GPS, NUM_RFKILL_TYPES, }; -- cgit v1.2.3 From bbff2e433e80fae72c8d00d482927d52ec19ba33 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Thu, 6 Aug 2009 11:36:25 +0300 Subject: slab: remove duplicate kmem_cache_init_late() declarations kmem_cache_init_late() has been declared in slab.h CC: Nick Piggin CC: Matt Mackall CC: Christoph Lameter Signed-off-by: Wu Fengguang Signed-off-by: Pekka Enberg --- include/linux/slob_def.h | 5 ----- include/linux/slub_def.h | 2 -- 2 files changed, 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/slob_def.h b/include/linux/slob_def.h index bb5368df4be8..0ec00b39d006 100644 --- a/include/linux/slob_def.h +++ b/include/linux/slob_def.h @@ -34,9 +34,4 @@ static __always_inline void *__kmalloc(size_t size, gfp_t flags) return kmalloc(size, flags); } -static inline void kmem_cache_init_late(void) -{ - /* Nothing to do */ -} - #endif /* __LINUX_SLOB_DEF_H */ diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index c1c862b1d01a..76c831693616 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -304,6 +304,4 @@ static __always_inline void *kmalloc_node(size_t size, gfp_t flags, int node) } #endif -void __init kmem_cache_init_late(void); - #endif /* _LINUX_SLUB_DEF_H */ -- cgit v1.2.3 From fa56d4cb4022c8b313c3b99236e1b87effc3655b Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 23 Jun 2009 11:29:11 +0000 Subject: ide: allow ide_dev_read_id() to be called from the IRQ context * Un-static __ide_wait_stat(). * Allow ide_dev_read_id() helper to be called from the IRQ context by adding irq_ctx flag and using mdelay()/__ide_wait_stat() when needed. * Switch ide_driveid_update() to set irq_ctx flag. This change is needed for the consecutive patch which fixes races in handling of user-space SET XFER commands but for improved bisectability and clarity it is better to do it in a separate patch. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller --- include/linux/ide.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ide.h b/include/linux/ide.h index edc93a6d931d..cb6cd0459a5e 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1081,6 +1081,7 @@ extern void ide_fixstring(u8 *, const int, const int); int ide_busy_sleep(ide_drive_t *, unsigned long, int); +int __ide_wait_stat(ide_drive_t *, u8, u8, unsigned long, u8 *); int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long); ide_startstop_t ide_do_park_unpark(ide_drive_t *, struct request *); @@ -1169,7 +1170,7 @@ int ide_no_data_taskfile(ide_drive_t *, struct ide_cmd *); int ide_taskfile_ioctl(ide_drive_t *, unsigned long); -int ide_dev_read_id(ide_drive_t *, u8, u16 *); +int ide_dev_read_id(ide_drive_t *, u8, u16 *, int); extern int ide_driveid_update(ide_drive_t *); extern int ide_config_drive_speed(ide_drive_t *, u8); -- cgit v1.2.3 From 665d66e8fad60a5a162c4615f27f916ad1a6d567 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 23 Jun 2009 11:35:51 +0000 Subject: ide: fix races in handling of user-space SET XFER commands * Make cmd->tf_flags field 'u16' and add IDE_TFLAG_SET_XFER taskfile flag. * Update ide_finish_cmd() to set xfer / re-read id if the new flag is set. * Convert set_xfer_rate() (write handler for /proc/ide/hd?/current_speed) and ide_cmd_ioctl() (HDIO_DRIVE_CMD ioctl handler) to use the new flag. * Remove no longer needed disable_irq_nosync() + enable_irq() from ide_config_drive_speed(). Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller --- include/linux/ide.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ide.h b/include/linux/ide.h index cb6cd0459a5e..803c1ae31237 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -258,6 +258,7 @@ enum { IDE_TFLAG_DYN = (1 << 5), IDE_TFLAG_FS = (1 << 6), IDE_TFLAG_MULTI_PIO = (1 << 7), + IDE_TFLAG_SET_XFER = (1 << 8), }; enum { @@ -294,7 +295,7 @@ struct ide_cmd { } out, in; } valid; - u8 tf_flags; + u16 tf_flags; u8 ftf_flags; /* for TASKFILE ioctl */ int protocol; -- cgit v1.2.3 From 7cd1837b5d24417eca667d674a97bea936849785 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Fri, 12 Jun 2009 18:36:33 +0200 Subject: netfilter: xtables: remove xt_TOS v0 Superseded by xt_TOS v1 (v2.6.24-2396-g5c350e5). Signed-off-by: Jan Engelhardt --- include/linux/netfilter_ipv4/Kbuild | 2 -- include/linux/netfilter_ipv4/ipt_TOS.h | 12 ------------ include/linux/netfilter_ipv4/ipt_tos.h | 13 ------------- 3 files changed, 27 deletions(-) delete mode 100644 include/linux/netfilter_ipv4/ipt_TOS.h delete mode 100644 include/linux/netfilter_ipv4/ipt_tos.h (limited to 'include/linux') diff --git a/include/linux/netfilter_ipv4/Kbuild b/include/linux/netfilter_ipv4/Kbuild index 3a7105bb8f33..86d81a285f9c 100644 --- a/include/linux/netfilter_ipv4/Kbuild +++ b/include/linux/netfilter_ipv4/Kbuild @@ -9,7 +9,6 @@ header-y += ipt_NFQUEUE.h header-y += ipt_REJECT.h header-y += ipt_SAME.h header-y += ipt_TCPMSS.h -header-y += ipt_TOS.h header-y += ipt_TTL.h header-y += ipt_ULOG.h header-y += ipt_addrtype.h @@ -40,7 +39,6 @@ header-y += ipt_sctp.h header-y += ipt_state.h header-y += ipt_string.h header-y += ipt_tcpmss.h -header-y += ipt_tos.h header-y += ipt_ttl.h unifdef-y += ip_queue.h diff --git a/include/linux/netfilter_ipv4/ipt_TOS.h b/include/linux/netfilter_ipv4/ipt_TOS.h deleted file mode 100644 index 6bf9e1fdfd88..000000000000 --- a/include/linux/netfilter_ipv4/ipt_TOS.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _IPT_TOS_H_target -#define _IPT_TOS_H_target - -#ifndef IPTOS_NORMALSVC -#define IPTOS_NORMALSVC 0 -#endif - -struct ipt_tos_target_info { - u_int8_t tos; -}; - -#endif /*_IPT_TOS_H_target*/ diff --git a/include/linux/netfilter_ipv4/ipt_tos.h b/include/linux/netfilter_ipv4/ipt_tos.h deleted file mode 100644 index a21f5df23c50..000000000000 --- a/include/linux/netfilter_ipv4/ipt_tos.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef _IPT_TOS_H -#define _IPT_TOS_H - -struct ipt_tos_info { - u_int8_t tos; - u_int8_t invert; -}; - -#ifndef IPTOS_NORMALSVC -#define IPTOS_NORMALSVC 0 -#endif - -#endif /*_IPT_TOS_H*/ -- cgit v1.2.3 From e973a70ca033bfcd4d8b59d1f66bfc1e782e1276 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Fri, 12 Jun 2009 18:42:12 +0200 Subject: netfilter: xtables: remove xt_CONNMARK v0 Superseded by xt_CONNMARK v1 (v2.6.24-2917-g0dc8c76). Signed-off-by: Jan Engelhardt --- include/linux/netfilter/xt_CONNMARK.h | 6 ------ 1 file changed, 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netfilter/xt_CONNMARK.h b/include/linux/netfilter/xt_CONNMARK.h index 7635c8ffdadb..0a8545866752 100644 --- a/include/linux/netfilter/xt_CONNMARK.h +++ b/include/linux/netfilter/xt_CONNMARK.h @@ -18,12 +18,6 @@ enum { XT_CONNMARK_RESTORE }; -struct xt_connmark_target_info { - unsigned long mark; - unsigned long mask; - __u8 mode; -}; - struct xt_connmark_tginfo1 { __u32 ctmark, ctmask, nfmask; __u8 mode; -- cgit v1.2.3 From c8001f7fd5a4684280fddceed9fae9ea2e4fb521 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Fri, 12 Jun 2009 18:47:32 +0200 Subject: netfilter: xtables: remove xt_MARK v0, v1 Superseded by xt_MARK v2 (v2.6.24-2918-ge0a812a). Signed-off-by: Jan Engelhardt --- include/linux/netfilter/xt_MARK.h | 17 ----------------- 1 file changed, 17 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netfilter/xt_MARK.h b/include/linux/netfilter/xt_MARK.h index 028304bcc0b1..bc9561bdef79 100644 --- a/include/linux/netfilter/xt_MARK.h +++ b/include/linux/netfilter/xt_MARK.h @@ -3,23 +3,6 @@ #include -/* Version 0 */ -struct xt_mark_target_info { - unsigned long mark; -}; - -/* Version 1 */ -enum { - XT_MARK_SET=0, - XT_MARK_AND, - XT_MARK_OR, -}; - -struct xt_mark_target_info_v1 { - unsigned long mark; - __u8 mode; -}; - struct xt_mark_tginfo2 { __u32 mark, mask; }; -- cgit v1.2.3 From 84899a2b9adaf6c2e20d198d7c24562ce6b391d8 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Fri, 12 Jun 2009 18:50:33 +0200 Subject: netfilter: xtables: remove xt_connmark v0 Superseded by xt_connmark v1 (v2.6.24-2919-g96e3227). Signed-off-by: Jan Engelhardt --- include/linux/netfilter/xt_connmark.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netfilter/xt_connmark.h b/include/linux/netfilter/xt_connmark.h index 571e266d004c..619e47cde01a 100644 --- a/include/linux/netfilter/xt_connmark.h +++ b/include/linux/netfilter/xt_connmark.h @@ -12,11 +12,6 @@ * (at your option) any later version. */ -struct xt_connmark_info { - unsigned long mark, mask; - __u8 invert; -}; - struct xt_connmark_mtinfo1 { __u32 mark, mask; __u8 invert; -- cgit v1.2.3 From 9e05ec4b1804a1ba51f61fe169aef9b86edcd3f7 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Fri, 12 Jun 2009 18:56:14 +0200 Subject: netfilter: xtables: remove xt_conntrack v0 Superseded by xt_conntrack v1 (v2.6.24-2921-g64eb12f). Signed-off-by: Jan Engelhardt --- include/linux/netfilter/xt_conntrack.h | 36 ---------------------------------- 1 file changed, 36 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netfilter/xt_conntrack.h b/include/linux/netfilter/xt_conntrack.h index 7ae05338e94c..54f47a2f6152 100644 --- a/include/linux/netfilter/xt_conntrack.h +++ b/include/linux/netfilter/xt_conntrack.h @@ -32,42 +32,6 @@ enum { XT_CONNTRACK_DIRECTION = 1 << 12, }; -/* This is exposed to userspace, so remains frozen in time. */ -struct ip_conntrack_old_tuple -{ - struct { - __be32 ip; - union { - __u16 all; - } u; - } src; - - struct { - __be32 ip; - union { - __u16 all; - } u; - - /* The protocol. */ - __u16 protonum; - } dst; -}; - -struct xt_conntrack_info -{ - unsigned int statemask, statusmask; - - struct ip_conntrack_old_tuple tuple[IP_CT_DIR_MAX]; - struct in_addr sipmsk[IP_CT_DIR_MAX], dipmsk[IP_CT_DIR_MAX]; - - unsigned long expires_min, expires_max; - - /* Flags word */ - __u8 flags; - /* Inverse flags */ - __u8 invflags; -}; - struct xt_conntrack_mtinfo1 { union nf_inet_addr origsrc_addr, origsrc_mask; union nf_inet_addr origdst_addr, origdst_mask; -- cgit v1.2.3 From 36d4084dc8eb7a9a3655a2041097a46aff3061e9 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Fri, 12 Jun 2009 18:58:19 +0200 Subject: netfilter: xtables: remove xt_iprange v0 Superseded by xt_iprange v1 (v2.6.24-2928-g1a50c5a1). Signed-off-by: Jan Engelhardt --- include/linux/netfilter_ipv4/Kbuild | 1 - include/linux/netfilter_ipv4/ipt_iprange.h | 21 --------------------- 2 files changed, 22 deletions(-) delete mode 100644 include/linux/netfilter_ipv4/ipt_iprange.h (limited to 'include/linux') diff --git a/include/linux/netfilter_ipv4/Kbuild b/include/linux/netfilter_ipv4/Kbuild index 86d81a285f9c..5e361ef44e87 100644 --- a/include/linux/netfilter_ipv4/Kbuild +++ b/include/linux/netfilter_ipv4/Kbuild @@ -23,7 +23,6 @@ header-y += ipt_ecn.h header-y += ipt_esp.h header-y += ipt_hashlimit.h header-y += ipt_helper.h -header-y += ipt_iprange.h header-y += ipt_length.h header-y += ipt_limit.h header-y += ipt_mac.h diff --git a/include/linux/netfilter_ipv4/ipt_iprange.h b/include/linux/netfilter_ipv4/ipt_iprange.h deleted file mode 100644 index 5f1aebde4d2f..000000000000 --- a/include/linux/netfilter_ipv4/ipt_iprange.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef _IPT_IPRANGE_H -#define _IPT_IPRANGE_H - -#include -#include - -struct ipt_iprange { - /* Inclusive: network order. */ - __be32 min_ip, max_ip; -}; - -struct ipt_iprange_info -{ - struct ipt_iprange src; - struct ipt_iprange dst; - - /* Flags from above */ - u_int8_t flags; -}; - -#endif /* _IPT_IPRANGE_H */ -- cgit v1.2.3 From 4725c7287ef2c4340cb433f59e40d143c1f43c22 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Fri, 12 Jun 2009 19:02:27 +0200 Subject: netfilter: xtables: remove xt_mark v0 Superseded by xt_mark v1 (v2.6.24-2922-g17b0d7e). Signed-off-by: Jan Engelhardt --- include/linux/netfilter/xt_mark.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netfilter/xt_mark.h b/include/linux/netfilter/xt_mark.h index 6fa460a3cc29..6607c8f38ea5 100644 --- a/include/linux/netfilter/xt_mark.h +++ b/include/linux/netfilter/xt_mark.h @@ -3,11 +3,6 @@ #include -struct xt_mark_info { - unsigned long mark, mask; - __u8 invert; -}; - struct xt_mark_mtinfo1 { __u32 mark, mask; __u8 invert; -- cgit v1.2.3 From 6461caed83412ae3e9a16785ffa64396fb66c6a6 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Fri, 12 Jun 2009 19:46:26 +0200 Subject: netfilter: xtables: remove xt_owner v0 Superseded by xt_owner v1 (v2.6.24-2388-g0265ab4). Signed-off-by: Jan Engelhardt --- include/linux/netfilter_ipv4/Kbuild | 1 - include/linux/netfilter_ipv4/ipt_owner.h | 20 -------------------- include/linux/netfilter_ipv6/Kbuild | 1 - include/linux/netfilter_ipv6/ip6t_owner.h | 18 ------------------ 4 files changed, 40 deletions(-) delete mode 100644 include/linux/netfilter_ipv4/ipt_owner.h delete mode 100644 include/linux/netfilter_ipv6/ip6t_owner.h (limited to 'include/linux') diff --git a/include/linux/netfilter_ipv4/Kbuild b/include/linux/netfilter_ipv4/Kbuild index 5e361ef44e87..541300531cb3 100644 --- a/include/linux/netfilter_ipv4/Kbuild +++ b/include/linux/netfilter_ipv4/Kbuild @@ -28,7 +28,6 @@ header-y += ipt_limit.h header-y += ipt_mac.h header-y += ipt_mark.h header-y += ipt_multiport.h -header-y += ipt_owner.h header-y += ipt_physdev.h header-y += ipt_pkttype.h header-y += ipt_policy.h diff --git a/include/linux/netfilter_ipv4/ipt_owner.h b/include/linux/netfilter_ipv4/ipt_owner.h deleted file mode 100644 index a78445be9992..000000000000 --- a/include/linux/netfilter_ipv4/ipt_owner.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef _IPT_OWNER_H -#define _IPT_OWNER_H - -/* match and invert flags */ -#define IPT_OWNER_UID 0x01 -#define IPT_OWNER_GID 0x02 -#define IPT_OWNER_PID 0x04 -#define IPT_OWNER_SID 0x08 -#define IPT_OWNER_COMM 0x10 - -struct ipt_owner_info { - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_pid_t pid; - __kernel_pid_t sid; - char comm[16]; - u_int8_t match, invert; /* flags */ -}; - -#endif /*_IPT_OWNER_H*/ diff --git a/include/linux/netfilter_ipv6/Kbuild b/include/linux/netfilter_ipv6/Kbuild index aca4bd1f6d7c..4610a16da0ab 100644 --- a/include/linux/netfilter_ipv6/Kbuild +++ b/include/linux/netfilter_ipv6/Kbuild @@ -14,7 +14,6 @@ header-y += ip6t_mark.h header-y += ip6t_mh.h header-y += ip6t_multiport.h header-y += ip6t_opts.h -header-y += ip6t_owner.h header-y += ip6t_physdev.h header-y += ip6t_policy.h header-y += ip6t_rt.h diff --git a/include/linux/netfilter_ipv6/ip6t_owner.h b/include/linux/netfilter_ipv6/ip6t_owner.h deleted file mode 100644 index ec5cc7a38c42..000000000000 --- a/include/linux/netfilter_ipv6/ip6t_owner.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef _IP6T_OWNER_H -#define _IP6T_OWNER_H - -/* match and invert flags */ -#define IP6T_OWNER_UID 0x01 -#define IP6T_OWNER_GID 0x02 -#define IP6T_OWNER_PID 0x04 -#define IP6T_OWNER_SID 0x08 - -struct ip6t_owner_info { - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_pid_t pid; - __kernel_pid_t sid; - u_int8_t match, invert; /* flags */ -}; - -#endif /*_IPT_OWNER_H*/ -- cgit v1.2.3 From 93bb1e9d117bfc60306b2b8bd9e0fa7ba3c88636 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Fri, 12 Jun 2009 19:47:21 +0200 Subject: netfilter: xtables: remove redirecting header files When IPv4 and IPv6 matches were unified approx. 3.5 years ago, they received new header filenames (e.g. xt_CLASSIFY.h). Let's remove the old ones now. Signed-off-by: Jan Engelhardt --- include/linux/netfilter_ipv4/Kbuild | 28 ------- include/linux/netfilter_ipv4/ipt_CLASSIFY.h | 7 -- include/linux/netfilter_ipv4/ipt_CONNMARK.h | 19 ----- include/linux/netfilter_ipv4/ipt_DSCP.h | 18 ----- include/linux/netfilter_ipv4/ipt_ECN.h | 4 +- include/linux/netfilter_ipv4/ipt_MARK.h | 18 ----- include/linux/netfilter_ipv4/ipt_NFQUEUE.h | 16 ---- include/linux/netfilter_ipv4/ipt_TCPMSS.h | 9 --- include/linux/netfilter_ipv4/ipt_comment.h | 10 --- include/linux/netfilter_ipv4/ipt_connbytes.h | 18 ----- include/linux/netfilter_ipv4/ipt_connmark.h | 7 -- include/linux/netfilter_ipv4/ipt_conntrack.h | 28 ------- include/linux/netfilter_ipv4/ipt_dccp.h | 15 ---- include/linux/netfilter_ipv4/ipt_dscp.h | 21 ------ include/linux/netfilter_ipv4/ipt_ecn.h | 4 +- include/linux/netfilter_ipv4/ipt_esp.h | 10 --- include/linux/netfilter_ipv4/ipt_hashlimit.h | 14 ---- include/linux/netfilter_ipv4/ipt_helper.h | 7 -- include/linux/netfilter_ipv4/ipt_length.h | 7 -- include/linux/netfilter_ipv4/ipt_limit.h | 8 -- include/linux/netfilter_ipv4/ipt_mac.h | 7 -- include/linux/netfilter_ipv4/ipt_mark.h | 9 --- include/linux/netfilter_ipv4/ipt_multiport.h | 15 ---- include/linux/netfilter_ipv4/ipt_physdev.h | 17 ----- include/linux/netfilter_ipv4/ipt_pkttype.h | 7 -- include/linux/netfilter_ipv4/ipt_policy.h | 23 ------ include/linux/netfilter_ipv4/ipt_recent.h | 21 ------ include/linux/netfilter_ipv4/ipt_sctp.h | 105 -------------------------- include/linux/netfilter_ipv4/ipt_state.h | 15 ---- include/linux/netfilter_ipv4/ipt_string.h | 10 --- include/linux/netfilter_ipv4/ipt_tcpmss.h | 7 -- include/linux/netfilter_ipv6/Kbuild | 11 +-- include/linux/netfilter_ipv6/ip6t_MARK.h | 9 --- include/linux/netfilter_ipv6/ip6t_esp.h | 10 --- include/linux/netfilter_ipv6/ip6t_length.h | 8 -- include/linux/netfilter_ipv6/ip6t_limit.h | 8 -- include/linux/netfilter_ipv6/ip6t_mac.h | 7 -- include/linux/netfilter_ipv6/ip6t_mark.h | 9 --- include/linux/netfilter_ipv6/ip6t_multiport.h | 14 ---- include/linux/netfilter_ipv6/ip6t_physdev.h | 17 ----- include/linux/netfilter_ipv6/ip6t_policy.h | 23 ------ 41 files changed, 5 insertions(+), 615 deletions(-) delete mode 100644 include/linux/netfilter_ipv4/ipt_CLASSIFY.h delete mode 100644 include/linux/netfilter_ipv4/ipt_CONNMARK.h delete mode 100644 include/linux/netfilter_ipv4/ipt_DSCP.h delete mode 100644 include/linux/netfilter_ipv4/ipt_MARK.h delete mode 100644 include/linux/netfilter_ipv4/ipt_NFQUEUE.h delete mode 100644 include/linux/netfilter_ipv4/ipt_TCPMSS.h delete mode 100644 include/linux/netfilter_ipv4/ipt_comment.h delete mode 100644 include/linux/netfilter_ipv4/ipt_connbytes.h delete mode 100644 include/linux/netfilter_ipv4/ipt_connmark.h delete mode 100644 include/linux/netfilter_ipv4/ipt_conntrack.h delete mode 100644 include/linux/netfilter_ipv4/ipt_dccp.h delete mode 100644 include/linux/netfilter_ipv4/ipt_dscp.h delete mode 100644 include/linux/netfilter_ipv4/ipt_esp.h delete mode 100644 include/linux/netfilter_ipv4/ipt_hashlimit.h delete mode 100644 include/linux/netfilter_ipv4/ipt_helper.h delete mode 100644 include/linux/netfilter_ipv4/ipt_length.h delete mode 100644 include/linux/netfilter_ipv4/ipt_limit.h delete mode 100644 include/linux/netfilter_ipv4/ipt_mac.h delete mode 100644 include/linux/netfilter_ipv4/ipt_mark.h delete mode 100644 include/linux/netfilter_ipv4/ipt_multiport.h delete mode 100644 include/linux/netfilter_ipv4/ipt_physdev.h delete mode 100644 include/linux/netfilter_ipv4/ipt_pkttype.h delete mode 100644 include/linux/netfilter_ipv4/ipt_policy.h delete mode 100644 include/linux/netfilter_ipv4/ipt_recent.h delete mode 100644 include/linux/netfilter_ipv4/ipt_sctp.h delete mode 100644 include/linux/netfilter_ipv4/ipt_state.h delete mode 100644 include/linux/netfilter_ipv4/ipt_string.h delete mode 100644 include/linux/netfilter_ipv4/ipt_tcpmss.h delete mode 100644 include/linux/netfilter_ipv6/ip6t_MARK.h delete mode 100644 include/linux/netfilter_ipv6/ip6t_esp.h delete mode 100644 include/linux/netfilter_ipv6/ip6t_length.h delete mode 100644 include/linux/netfilter_ipv6/ip6t_limit.h delete mode 100644 include/linux/netfilter_ipv6/ip6t_mac.h delete mode 100644 include/linux/netfilter_ipv6/ip6t_mark.h delete mode 100644 include/linux/netfilter_ipv6/ip6t_multiport.h delete mode 100644 include/linux/netfilter_ipv6/ip6t_physdev.h delete mode 100644 include/linux/netfilter_ipv6/ip6t_policy.h (limited to 'include/linux') diff --git a/include/linux/netfilter_ipv4/Kbuild b/include/linux/netfilter_ipv4/Kbuild index 541300531cb3..431b40761920 100644 --- a/include/linux/netfilter_ipv4/Kbuild +++ b/include/linux/netfilter_ipv4/Kbuild @@ -1,42 +1,14 @@ -header-y += ipt_CLASSIFY.h header-y += ipt_CLUSTERIP.h -header-y += ipt_CONNMARK.h -header-y += ipt_DSCP.h header-y += ipt_ECN.h header-y += ipt_LOG.h -header-y += ipt_MARK.h -header-y += ipt_NFQUEUE.h header-y += ipt_REJECT.h header-y += ipt_SAME.h -header-y += ipt_TCPMSS.h header-y += ipt_TTL.h header-y += ipt_ULOG.h header-y += ipt_addrtype.h header-y += ipt_ah.h -header-y += ipt_comment.h -header-y += ipt_connbytes.h -header-y += ipt_connmark.h -header-y += ipt_conntrack.h -header-y += ipt_dccp.h -header-y += ipt_dscp.h header-y += ipt_ecn.h -header-y += ipt_esp.h -header-y += ipt_hashlimit.h -header-y += ipt_helper.h -header-y += ipt_length.h -header-y += ipt_limit.h -header-y += ipt_mac.h -header-y += ipt_mark.h -header-y += ipt_multiport.h -header-y += ipt_physdev.h -header-y += ipt_pkttype.h -header-y += ipt_policy.h header-y += ipt_realm.h -header-y += ipt_recent.h -header-y += ipt_sctp.h -header-y += ipt_state.h -header-y += ipt_string.h -header-y += ipt_tcpmss.h header-y += ipt_ttl.h unifdef-y += ip_queue.h diff --git a/include/linux/netfilter_ipv4/ipt_CLASSIFY.h b/include/linux/netfilter_ipv4/ipt_CLASSIFY.h deleted file mode 100644 index a46d511b5c36..000000000000 --- a/include/linux/netfilter_ipv4/ipt_CLASSIFY.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _IPT_CLASSIFY_H -#define _IPT_CLASSIFY_H - -#include -#define ipt_classify_target_info xt_classify_target_info - -#endif /*_IPT_CLASSIFY_H */ diff --git a/include/linux/netfilter_ipv4/ipt_CONNMARK.h b/include/linux/netfilter_ipv4/ipt_CONNMARK.h deleted file mode 100644 index 9ecfee0a9e33..000000000000 --- a/include/linux/netfilter_ipv4/ipt_CONNMARK.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _IPT_CONNMARK_H_target -#define _IPT_CONNMARK_H_target - -/* Copyright (C) 2002,2004 MARA Systems AB - * by Henrik Nordstrom - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#include -#define IPT_CONNMARK_SET XT_CONNMARK_SET -#define IPT_CONNMARK_SAVE XT_CONNMARK_SAVE -#define IPT_CONNMARK_RESTORE XT_CONNMARK_RESTORE - -#define ipt_connmark_target_info xt_connmark_target_info - -#endif /*_IPT_CONNMARK_H_target*/ diff --git a/include/linux/netfilter_ipv4/ipt_DSCP.h b/include/linux/netfilter_ipv4/ipt_DSCP.h deleted file mode 100644 index 3491e524d5ea..000000000000 --- a/include/linux/netfilter_ipv4/ipt_DSCP.h +++ /dev/null @@ -1,18 +0,0 @@ -/* iptables module for setting the IPv4 DSCP field - * - * (C) 2002 Harald Welte - * based on ipt_FTOS.c (C) 2000 by Matthew G. Marsh - * This software is distributed under GNU GPL v2, 1991 - * - * See RFC2474 for a description of the DSCP field within the IP Header. - * - * ipt_DSCP.h,v 1.7 2002/03/14 12:03:13 laforge Exp -*/ -#ifndef _IPT_DSCP_TARGET_H -#define _IPT_DSCP_TARGET_H -#include -#include - -#define ipt_DSCP_info xt_DSCP_info - -#endif /* _IPT_DSCP_TARGET_H */ diff --git a/include/linux/netfilter_ipv4/ipt_ECN.h b/include/linux/netfilter_ipv4/ipt_ECN.h index 94e0d9866469..7ca45918ab8e 100644 --- a/include/linux/netfilter_ipv4/ipt_ECN.h +++ b/include/linux/netfilter_ipv4/ipt_ECN.h @@ -8,9 +8,9 @@ */ #ifndef _IPT_ECN_TARGET_H #define _IPT_ECN_TARGET_H -#include +#include -#define IPT_ECN_IP_MASK (~IPT_DSCP_MASK) +#define IPT_ECN_IP_MASK (~XT_DSCP_MASK) #define IPT_ECN_OP_SET_IP 0x01 /* set ECN bits of IPv4 header */ #define IPT_ECN_OP_SET_ECE 0x10 /* set ECE bit of TCP header */ diff --git a/include/linux/netfilter_ipv4/ipt_MARK.h b/include/linux/netfilter_ipv4/ipt_MARK.h deleted file mode 100644 index 697a486a96d3..000000000000 --- a/include/linux/netfilter_ipv4/ipt_MARK.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef _IPT_MARK_H_target -#define _IPT_MARK_H_target - -/* Backwards compatibility for old userspace */ - -#include - -/* Version 0 */ -#define ipt_mark_target_info xt_mark_target_info - -/* Version 1 */ -#define IPT_MARK_SET XT_MARK_SET -#define IPT_MARK_AND XT_MARK_AND -#define IPT_MARK_OR XT_MARK_OR - -#define ipt_mark_target_info_v1 xt_mark_target_info_v1 - -#endif /*_IPT_MARK_H_target*/ diff --git a/include/linux/netfilter_ipv4/ipt_NFQUEUE.h b/include/linux/netfilter_ipv4/ipt_NFQUEUE.h deleted file mode 100644 index 97a2a7557cb9..000000000000 --- a/include/linux/netfilter_ipv4/ipt_NFQUEUE.h +++ /dev/null @@ -1,16 +0,0 @@ -/* iptables module for using NFQUEUE mechanism - * - * (C) 2005 Harald Welte - * - * This software is distributed under GNU GPL v2, 1991 - * -*/ -#ifndef _IPT_NFQ_TARGET_H -#define _IPT_NFQ_TARGET_H - -/* Backwards compatibility for old userspace */ -#include - -#define ipt_NFQ_info xt_NFQ_info - -#endif /* _IPT_DSCP_TARGET_H */ diff --git a/include/linux/netfilter_ipv4/ipt_TCPMSS.h b/include/linux/netfilter_ipv4/ipt_TCPMSS.h deleted file mode 100644 index 7a850f945824..000000000000 --- a/include/linux/netfilter_ipv4/ipt_TCPMSS.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef _IPT_TCPMSS_H -#define _IPT_TCPMSS_H - -#include - -#define ipt_tcpmss_info xt_tcpmss_info -#define IPT_TCPMSS_CLAMP_PMTU XT_TCPMSS_CLAMP_PMTU - -#endif /*_IPT_TCPMSS_H*/ diff --git a/include/linux/netfilter_ipv4/ipt_comment.h b/include/linux/netfilter_ipv4/ipt_comment.h deleted file mode 100644 index ae2afc2f7481..000000000000 --- a/include/linux/netfilter_ipv4/ipt_comment.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef _IPT_COMMENT_H -#define _IPT_COMMENT_H - -#include - -#define IPT_MAX_COMMENT_LEN XT_MAX_COMMENT_LEN - -#define ipt_comment_info xt_comment_info - -#endif /* _IPT_COMMENT_H */ diff --git a/include/linux/netfilter_ipv4/ipt_connbytes.h b/include/linux/netfilter_ipv4/ipt_connbytes.h deleted file mode 100644 index f63e6ee91113..000000000000 --- a/include/linux/netfilter_ipv4/ipt_connbytes.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef _IPT_CONNBYTES_H -#define _IPT_CONNBYTES_H - -#include -#define ipt_connbytes_what xt_connbytes_what - -#define IPT_CONNBYTES_PKTS XT_CONNBYTES_PKTS -#define IPT_CONNBYTES_BYTES XT_CONNBYTES_BYTES -#define IPT_CONNBYTES_AVGPKT XT_CONNBYTES_AVGPKT - -#define ipt_connbytes_direction xt_connbytes_direction -#define IPT_CONNBYTES_DIR_ORIGINAL XT_CONNBYTES_DIR_ORIGINAL -#define IPT_CONNBYTES_DIR_REPLY XT_CONNBYTES_DIR_REPLY -#define IPT_CONNBYTES_DIR_BOTH XT_CONNBYTES_DIR_BOTH - -#define ipt_connbytes_info xt_connbytes_info - -#endif diff --git a/include/linux/netfilter_ipv4/ipt_connmark.h b/include/linux/netfilter_ipv4/ipt_connmark.h deleted file mode 100644 index c7ba6560d44c..000000000000 --- a/include/linux/netfilter_ipv4/ipt_connmark.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _IPT_CONNMARK_H -#define _IPT_CONNMARK_H - -#include -#define ipt_connmark_info xt_connmark_info - -#endif /*_IPT_CONNMARK_H*/ diff --git a/include/linux/netfilter_ipv4/ipt_conntrack.h b/include/linux/netfilter_ipv4/ipt_conntrack.h deleted file mode 100644 index cde6762949c5..000000000000 --- a/include/linux/netfilter_ipv4/ipt_conntrack.h +++ /dev/null @@ -1,28 +0,0 @@ -/* Header file for kernel module to match connection tracking information. - * GPL (C) 2001 Marc Boucher (marc@mbsi.ca). - */ - -#ifndef _IPT_CONNTRACK_H -#define _IPT_CONNTRACK_H - -#include - -#define IPT_CONNTRACK_STATE_BIT(ctinfo) XT_CONNTRACK_STATE_BIT(ctinfo) -#define IPT_CONNTRACK_STATE_INVALID XT_CONNTRACK_STATE_INVALID - -#define IPT_CONNTRACK_STATE_SNAT XT_CONNTRACK_STATE_SNAT -#define IPT_CONNTRACK_STATE_DNAT XT_CONNTRACK_STATE_DNAT -#define IPT_CONNTRACK_STATE_UNTRACKED XT_CONNTRACK_STATE_UNTRACKED - -/* flags, invflags: */ -#define IPT_CONNTRACK_STATE XT_CONNTRACK_STATE -#define IPT_CONNTRACK_PROTO XT_CONNTRACK_PROTO -#define IPT_CONNTRACK_ORIGSRC XT_CONNTRACK_ORIGSRC -#define IPT_CONNTRACK_ORIGDST XT_CONNTRACK_ORIGDST -#define IPT_CONNTRACK_REPLSRC XT_CONNTRACK_REPLSRC -#define IPT_CONNTRACK_REPLDST XT_CONNTRACK_REPLDST -#define IPT_CONNTRACK_STATUS XT_CONNTRACK_STATUS -#define IPT_CONNTRACK_EXPIRES XT_CONNTRACK_EXPIRES - -#define ipt_conntrack_info xt_conntrack_info -#endif /*_IPT_CONNTRACK_H*/ diff --git a/include/linux/netfilter_ipv4/ipt_dccp.h b/include/linux/netfilter_ipv4/ipt_dccp.h deleted file mode 100644 index e70d11e1f53c..000000000000 --- a/include/linux/netfilter_ipv4/ipt_dccp.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef _IPT_DCCP_H_ -#define _IPT_DCCP_H_ - -#include -#define IPT_DCCP_SRC_PORTS XT_DCCP_SRC_PORTS -#define IPT_DCCP_DEST_PORTS XT_DCCP_DEST_PORTS -#define IPT_DCCP_TYPE XT_DCCP_TYPE -#define IPT_DCCP_OPTION XT_DCCP_OPTION - -#define IPT_DCCP_VALID_FLAGS XT_DCCP_VALID_FLAGS - -#define ipt_dccp_info xt_dccp_info - -#endif /* _IPT_DCCP_H_ */ - diff --git a/include/linux/netfilter_ipv4/ipt_dscp.h b/include/linux/netfilter_ipv4/ipt_dscp.h deleted file mode 100644 index 4b82ca912b0e..000000000000 --- a/include/linux/netfilter_ipv4/ipt_dscp.h +++ /dev/null @@ -1,21 +0,0 @@ -/* iptables module for matching the IPv4 DSCP field - * - * (C) 2002 Harald Welte - * This software is distributed under GNU GPL v2, 1991 - * - * See RFC2474 for a description of the DSCP field within the IP Header. - * - * ipt_dscp.h,v 1.3 2002/08/05 19:00:21 laforge Exp -*/ -#ifndef _IPT_DSCP_H -#define _IPT_DSCP_H - -#include - -#define IPT_DSCP_MASK XT_DSCP_MASK -#define IPT_DSCP_SHIFT XT_DSCP_SHIFT -#define IPT_DSCP_MAX XT_DSCP_MAX - -#define ipt_dscp_info xt_dscp_info - -#endif /* _IPT_DSCP_H */ diff --git a/include/linux/netfilter_ipv4/ipt_ecn.h b/include/linux/netfilter_ipv4/ipt_ecn.h index 1f0d9a4d3378..9945baa4ccd7 100644 --- a/include/linux/netfilter_ipv4/ipt_ecn.h +++ b/include/linux/netfilter_ipv4/ipt_ecn.h @@ -8,9 +8,9 @@ */ #ifndef _IPT_ECN_H #define _IPT_ECN_H -#include +#include -#define IPT_ECN_IP_MASK (~IPT_DSCP_MASK) +#define IPT_ECN_IP_MASK (~XT_DSCP_MASK) #define IPT_ECN_OP_MATCH_IP 0x01 #define IPT_ECN_OP_MATCH_ECE 0x10 diff --git a/include/linux/netfilter_ipv4/ipt_esp.h b/include/linux/netfilter_ipv4/ipt_esp.h deleted file mode 100644 index 78296e7eeff9..000000000000 --- a/include/linux/netfilter_ipv4/ipt_esp.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef _IPT_ESP_H -#define _IPT_ESP_H - -#include - -#define ipt_esp xt_esp -#define IPT_ESP_INV_SPI XT_ESP_INV_SPI -#define IPT_ESP_INV_MASK XT_ESP_INV_MASK - -#endif /*_IPT_ESP_H*/ diff --git a/include/linux/netfilter_ipv4/ipt_hashlimit.h b/include/linux/netfilter_ipv4/ipt_hashlimit.h deleted file mode 100644 index 5662120a3d7b..000000000000 --- a/include/linux/netfilter_ipv4/ipt_hashlimit.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef _IPT_HASHLIMIT_H -#define _IPT_HASHLIMIT_H - -#include - -#define IPT_HASHLIMIT_SCALE XT_HASHLIMIT_SCALE -#define IPT_HASHLIMIT_HASH_DIP XT_HASHLIMIT_HASH_DIP -#define IPT_HASHLIMIT_HASH_DPT XT_HASHLIMIT_HASH_DPT -#define IPT_HASHLIMIT_HASH_SIP XT_HASHLIMIT_HASH_SIP -#define IPT_HASHLIMIT_HASH_SPT XT_HASHLIMIT_HASH_SPT - -#define ipt_hashlimit_info xt_hashlimit_info - -#endif /* _IPT_HASHLIMIT_H */ diff --git a/include/linux/netfilter_ipv4/ipt_helper.h b/include/linux/netfilter_ipv4/ipt_helper.h deleted file mode 100644 index 80452c218551..000000000000 --- a/include/linux/netfilter_ipv4/ipt_helper.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _IPT_HELPER_H -#define _IPT_HELPER_H - -#include -#define ipt_helper_info xt_helper_info - -#endif /* _IPT_HELPER_H */ diff --git a/include/linux/netfilter_ipv4/ipt_length.h b/include/linux/netfilter_ipv4/ipt_length.h deleted file mode 100644 index 9b45206ffcef..000000000000 --- a/include/linux/netfilter_ipv4/ipt_length.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _IPT_LENGTH_H -#define _IPT_LENGTH_H - -#include -#define ipt_length_info xt_length_info - -#endif /*_IPT_LENGTH_H*/ diff --git a/include/linux/netfilter_ipv4/ipt_limit.h b/include/linux/netfilter_ipv4/ipt_limit.h deleted file mode 100644 index 92f5cd07bbc4..000000000000 --- a/include/linux/netfilter_ipv4/ipt_limit.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef _IPT_RATE_H -#define _IPT_RATE_H - -#include -#define IPT_LIMIT_SCALE XT_LIMIT_SCALE -#define ipt_rateinfo xt_rateinfo - -#endif /*_IPT_RATE_H*/ diff --git a/include/linux/netfilter_ipv4/ipt_mac.h b/include/linux/netfilter_ipv4/ipt_mac.h deleted file mode 100644 index b186008a3c47..000000000000 --- a/include/linux/netfilter_ipv4/ipt_mac.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _IPT_MAC_H -#define _IPT_MAC_H - -#include -#define ipt_mac_info xt_mac_info - -#endif /*_IPT_MAC_H*/ diff --git a/include/linux/netfilter_ipv4/ipt_mark.h b/include/linux/netfilter_ipv4/ipt_mark.h deleted file mode 100644 index bfde67c61224..000000000000 --- a/include/linux/netfilter_ipv4/ipt_mark.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef _IPT_MARK_H -#define _IPT_MARK_H - -/* Backwards compatibility for old userspace */ -#include - -#define ipt_mark_info xt_mark_info - -#endif /*_IPT_MARK_H*/ diff --git a/include/linux/netfilter_ipv4/ipt_multiport.h b/include/linux/netfilter_ipv4/ipt_multiport.h deleted file mode 100644 index 55fe85eca88c..000000000000 --- a/include/linux/netfilter_ipv4/ipt_multiport.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef _IPT_MULTIPORT_H -#define _IPT_MULTIPORT_H - -#include - -#define IPT_MULTIPORT_SOURCE XT_MULTIPORT_SOURCE -#define IPT_MULTIPORT_DESTINATION XT_MULTIPORT_DESTINATION -#define IPT_MULTIPORT_EITHER XT_MULTIPORT_EITHER - -#define IPT_MULTI_PORTS XT_MULTI_PORTS - -#define ipt_multiport xt_multiport -#define ipt_multiport_v1 xt_multiport_v1 - -#endif /*_IPT_MULTIPORT_H*/ diff --git a/include/linux/netfilter_ipv4/ipt_physdev.h b/include/linux/netfilter_ipv4/ipt_physdev.h deleted file mode 100644 index 2400e7140f26..000000000000 --- a/include/linux/netfilter_ipv4/ipt_physdev.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef _IPT_PHYSDEV_H -#define _IPT_PHYSDEV_H - -/* Backwards compatibility for old userspace */ - -#include - -#define IPT_PHYSDEV_OP_IN XT_PHYSDEV_OP_IN -#define IPT_PHYSDEV_OP_OUT XT_PHYSDEV_OP_OUT -#define IPT_PHYSDEV_OP_BRIDGED XT_PHYSDEV_OP_BRIDGED -#define IPT_PHYSDEV_OP_ISIN XT_PHYSDEV_OP_ISIN -#define IPT_PHYSDEV_OP_ISOUT XT_PHYSDEV_OP_ISOUT -#define IPT_PHYSDEV_OP_MASK XT_PHYSDEV_OP_MASK - -#define ipt_physdev_info xt_physdev_info - -#endif /*_IPT_PHYSDEV_H*/ diff --git a/include/linux/netfilter_ipv4/ipt_pkttype.h b/include/linux/netfilter_ipv4/ipt_pkttype.h deleted file mode 100644 index ff1fbc949a0c..000000000000 --- a/include/linux/netfilter_ipv4/ipt_pkttype.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _IPT_PKTTYPE_H -#define _IPT_PKTTYPE_H - -#include -#define ipt_pkttype_info xt_pkttype_info - -#endif /*_IPT_PKTTYPE_H*/ diff --git a/include/linux/netfilter_ipv4/ipt_policy.h b/include/linux/netfilter_ipv4/ipt_policy.h deleted file mode 100644 index 1037fb2cd206..000000000000 --- a/include/linux/netfilter_ipv4/ipt_policy.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef _IPT_POLICY_H -#define _IPT_POLICY_H - -#include - -#define IPT_POLICY_MAX_ELEM XT_POLICY_MAX_ELEM - -/* ipt_policy_flags */ -#define IPT_POLICY_MATCH_IN XT_POLICY_MATCH_IN -#define IPT_POLICY_MATCH_OUT XT_POLICY_MATCH_OUT -#define IPT_POLICY_MATCH_NONE XT_POLICY_MATCH_NONE -#define IPT_POLICY_MATCH_STRICT XT_POLICY_MATCH_STRICT - -/* ipt_policy_modes */ -#define IPT_POLICY_MODE_TRANSPORT XT_POLICY_MODE_TRANSPORT -#define IPT_POLICY_MODE_TUNNEL XT_POLICY_MODE_TUNNEL - -#define ipt_policy_spec xt_policy_spec -#define ipt_policy_addr xt_policy_addr -#define ipt_policy_elem xt_policy_elem -#define ipt_policy_info xt_policy_info - -#endif /* _IPT_POLICY_H */ diff --git a/include/linux/netfilter_ipv4/ipt_recent.h b/include/linux/netfilter_ipv4/ipt_recent.h deleted file mode 100644 index d636cca133c2..000000000000 --- a/include/linux/netfilter_ipv4/ipt_recent.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef _IPT_RECENT_H -#define _IPT_RECENT_H - -#include - -#define ipt_recent_info xt_recent_mtinfo - -enum { - IPT_RECENT_CHECK = XT_RECENT_CHECK, - IPT_RECENT_SET = XT_RECENT_SET, - IPT_RECENT_UPDATE = XT_RECENT_UPDATE, - IPT_RECENT_REMOVE = XT_RECENT_REMOVE, - IPT_RECENT_TTL = XT_RECENT_TTL, - - IPT_RECENT_SOURCE = XT_RECENT_SOURCE, - IPT_RECENT_DEST = XT_RECENT_DEST, - - IPT_RECENT_NAME_LEN = XT_RECENT_NAME_LEN, -}; - -#endif /*_IPT_RECENT_H*/ diff --git a/include/linux/netfilter_ipv4/ipt_sctp.h b/include/linux/netfilter_ipv4/ipt_sctp.h deleted file mode 100644 index 80b3dbacd193..000000000000 --- a/include/linux/netfilter_ipv4/ipt_sctp.h +++ /dev/null @@ -1,105 +0,0 @@ -#ifndef _IPT_SCTP_H_ -#define _IPT_SCTP_H_ - -#define IPT_SCTP_SRC_PORTS 0x01 -#define IPT_SCTP_DEST_PORTS 0x02 -#define IPT_SCTP_CHUNK_TYPES 0x04 - -#define IPT_SCTP_VALID_FLAGS 0x07 - - -struct ipt_sctp_flag_info { - u_int8_t chunktype; - u_int8_t flag; - u_int8_t flag_mask; -}; - -#define IPT_NUM_SCTP_FLAGS 4 - -struct ipt_sctp_info { - u_int16_t dpts[2]; /* Min, Max */ - u_int16_t spts[2]; /* Min, Max */ - - u_int32_t chunkmap[256 / sizeof (u_int32_t)]; /* Bit mask of chunks to be matched according to RFC 2960 */ - -#define SCTP_CHUNK_MATCH_ANY 0x01 /* Match if any of the chunk types are present */ -#define SCTP_CHUNK_MATCH_ALL 0x02 /* Match if all of the chunk types are present */ -#define SCTP_CHUNK_MATCH_ONLY 0x04 /* Match if these are the only chunk types present */ - - u_int32_t chunk_match_type; - struct ipt_sctp_flag_info flag_info[IPT_NUM_SCTP_FLAGS]; - int flag_count; - - u_int32_t flags; - u_int32_t invflags; -}; - -#define bytes(type) (sizeof(type) * 8) - -#define SCTP_CHUNKMAP_SET(chunkmap, type) \ - do { \ - chunkmap[type / bytes(u_int32_t)] |= \ - 1 << (type % bytes(u_int32_t)); \ - } while (0) - -#define SCTP_CHUNKMAP_CLEAR(chunkmap, type) \ - do { \ - chunkmap[type / bytes(u_int32_t)] &= \ - ~(1 << (type % bytes(u_int32_t))); \ - } while (0) - -#define SCTP_CHUNKMAP_IS_SET(chunkmap, type) \ -({ \ - (chunkmap[type / bytes (u_int32_t)] & \ - (1 << (type % bytes (u_int32_t)))) ? 1: 0; \ -}) - -#define SCTP_CHUNKMAP_RESET(chunkmap) \ - do { \ - int i; \ - for (i = 0; i < ARRAY_SIZE(chunkmap); i++) \ - chunkmap[i] = 0; \ - } while (0) - -#define SCTP_CHUNKMAP_SET_ALL(chunkmap) \ - do { \ - int i; \ - for (i = 0; i < ARRAY_SIZE(chunkmap); i++) \ - chunkmap[i] = ~0; \ - } while (0) - -#define SCTP_CHUNKMAP_COPY(destmap, srcmap) \ - do { \ - int i; \ - for (i = 0; i < ARRAY_SIZE(chunkmap); i++) \ - destmap[i] = srcmap[i]; \ - } while (0) - -#define SCTP_CHUNKMAP_IS_CLEAR(chunkmap) \ -({ \ - int i; \ - int flag = 1; \ - for (i = 0; i < ARRAY_SIZE(chunkmap); i++) { \ - if (chunkmap[i]) { \ - flag = 0; \ - break; \ - } \ - } \ - flag; \ -}) - -#define SCTP_CHUNKMAP_IS_ALL_SET(chunkmap) \ -({ \ - int i; \ - int flag = 1; \ - for (i = 0; i < ARRAY_SIZE(chunkmap); i++) { \ - if (chunkmap[i] != ~0) { \ - flag = 0; \ - break; \ - } \ - } \ - flag; \ -}) - -#endif /* _IPT_SCTP_H_ */ - diff --git a/include/linux/netfilter_ipv4/ipt_state.h b/include/linux/netfilter_ipv4/ipt_state.h deleted file mode 100644 index a44a99cc28cc..000000000000 --- a/include/linux/netfilter_ipv4/ipt_state.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef _IPT_STATE_H -#define _IPT_STATE_H - -/* Backwards compatibility for old userspace */ - -#include - -#define IPT_STATE_BIT XT_STATE_BIT -#define IPT_STATE_INVALID XT_STATE_INVALID - -#define IPT_STATE_UNTRACKED XT_STATE_UNTRACKED - -#define ipt_state_info xt_state_info - -#endif /*_IPT_STATE_H*/ diff --git a/include/linux/netfilter_ipv4/ipt_string.h b/include/linux/netfilter_ipv4/ipt_string.h deleted file mode 100644 index c26de3059903..000000000000 --- a/include/linux/netfilter_ipv4/ipt_string.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef _IPT_STRING_H -#define _IPT_STRING_H - -#include - -#define IPT_STRING_MAX_PATTERN_SIZE XT_STRING_MAX_PATTERN_SIZE -#define IPT_STRING_MAX_ALGO_NAME_SIZE XT_STRING_MAX_ALGO_NAME_SIZE -#define ipt_string_info xt_string_info - -#endif /*_IPT_STRING_H*/ diff --git a/include/linux/netfilter_ipv4/ipt_tcpmss.h b/include/linux/netfilter_ipv4/ipt_tcpmss.h deleted file mode 100644 index 18bbc8e8e009..000000000000 --- a/include/linux/netfilter_ipv4/ipt_tcpmss.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _IPT_TCPMSS_MATCH_H -#define _IPT_TCPMSS_MATCH_H - -#include -#define ipt_tcpmss_match_info xt_tcpmss_match_info - -#endif /*_IPT_TCPMSS_MATCH_H*/ diff --git a/include/linux/netfilter_ipv6/Kbuild b/include/linux/netfilter_ipv6/Kbuild index 4610a16da0ab..e864eaee9e5e 100644 --- a/include/linux/netfilter_ipv6/Kbuild +++ b/include/linux/netfilter_ipv6/Kbuild @@ -1,21 +1,12 @@ header-y += ip6t_HL.h header-y += ip6t_LOG.h -header-y += ip6t_MARK.h header-y += ip6t_REJECT.h header-y += ip6t_ah.h -header-y += ip6t_esp.h header-y += ip6t_frag.h -header-y += ip6t_hl.h header-y += ip6t_ipv6header.h -header-y += ip6t_length.h -header-y += ip6t_limit.h -header-y += ip6t_mac.h -header-y += ip6t_mark.h +header-y += ip6t_hl.h header-y += ip6t_mh.h -header-y += ip6t_multiport.h header-y += ip6t_opts.h -header-y += ip6t_physdev.h -header-y += ip6t_policy.h header-y += ip6t_rt.h unifdef-y += ip6_tables.h diff --git a/include/linux/netfilter_ipv6/ip6t_MARK.h b/include/linux/netfilter_ipv6/ip6t_MARK.h deleted file mode 100644 index 7cf629a8ab92..000000000000 --- a/include/linux/netfilter_ipv6/ip6t_MARK.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef _IP6T_MARK_H_target -#define _IP6T_MARK_H_target - -/* Backwards compatibility for old userspace */ -#include - -#define ip6t_mark_target_info xt_mark_target_info - -#endif /*_IP6T_MARK_H_target*/ diff --git a/include/linux/netfilter_ipv6/ip6t_esp.h b/include/linux/netfilter_ipv6/ip6t_esp.h deleted file mode 100644 index f62eaf53c16c..000000000000 --- a/include/linux/netfilter_ipv6/ip6t_esp.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef _IP6T_ESP_H -#define _IP6T_ESP_H - -#include - -#define ip6t_esp xt_esp -#define IP6T_ESP_INV_SPI XT_ESP_INV_SPI -#define IP6T_ESP_INV_MASK XT_ESP_INV_MASK - -#endif /*_IP6T_ESP_H*/ diff --git a/include/linux/netfilter_ipv6/ip6t_length.h b/include/linux/netfilter_ipv6/ip6t_length.h deleted file mode 100644 index 9e9689d03ed7..000000000000 --- a/include/linux/netfilter_ipv6/ip6t_length.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef _IP6T_LENGTH_H -#define _IP6T_LENGTH_H - -#include -#define ip6t_length_info xt_length_info - -#endif /*_IP6T_LENGTH_H*/ - diff --git a/include/linux/netfilter_ipv6/ip6t_limit.h b/include/linux/netfilter_ipv6/ip6t_limit.h deleted file mode 100644 index 487e5ea342c6..000000000000 --- a/include/linux/netfilter_ipv6/ip6t_limit.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef _IP6T_RATE_H -#define _IP6T_RATE_H - -#include -#define IP6T_LIMIT_SCALE XT_LIMIT_SCALE -#define ip6t_rateinfo xt_rateinfo - -#endif /*_IP6T_RATE_H*/ diff --git a/include/linux/netfilter_ipv6/ip6t_mac.h b/include/linux/netfilter_ipv6/ip6t_mac.h deleted file mode 100644 index ac58e83e9423..000000000000 --- a/include/linux/netfilter_ipv6/ip6t_mac.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _IP6T_MAC_H -#define _IP6T_MAC_H - -#include -#define ip6t_mac_info xt_mac_info - -#endif /*_IP6T_MAC_H*/ diff --git a/include/linux/netfilter_ipv6/ip6t_mark.h b/include/linux/netfilter_ipv6/ip6t_mark.h deleted file mode 100644 index ff204951ddc3..000000000000 --- a/include/linux/netfilter_ipv6/ip6t_mark.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef _IP6T_MARK_H -#define _IP6T_MARK_H - -/* Backwards compatibility for old userspace */ -#include - -#define ip6t_mark_info xt_mark_info - -#endif /*_IPT_MARK_H*/ diff --git a/include/linux/netfilter_ipv6/ip6t_multiport.h b/include/linux/netfilter_ipv6/ip6t_multiport.h deleted file mode 100644 index 042c92661cee..000000000000 --- a/include/linux/netfilter_ipv6/ip6t_multiport.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef _IP6T_MULTIPORT_H -#define _IP6T_MULTIPORT_H - -#include - -#define IP6T_MULTIPORT_SOURCE XT_MULTIPORT_SOURCE -#define IP6T_MULTIPORT_DESTINATION XT_MULTIPORT_DESTINATION -#define IP6T_MULTIPORT_EITHER XT_MULTIPORT_EITHER - -#define IP6T_MULTI_PORTS XT_MULTI_PORTS - -#define ip6t_multiport xt_multiport - -#endif /*_IP6T_MULTIPORT_H*/ diff --git a/include/linux/netfilter_ipv6/ip6t_physdev.h b/include/linux/netfilter_ipv6/ip6t_physdev.h deleted file mode 100644 index c161c0a81b55..000000000000 --- a/include/linux/netfilter_ipv6/ip6t_physdev.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef _IP6T_PHYSDEV_H -#define _IP6T_PHYSDEV_H - -/* Backwards compatibility for old userspace */ - -#include - -#define IP6T_PHYSDEV_OP_IN XT_PHYSDEV_OP_IN -#define IP6T_PHYSDEV_OP_OUT XT_PHYSDEV_OP_OUT -#define IP6T_PHYSDEV_OP_BRIDGED XT_PHYSDEV_OP_BRIDGED -#define IP6T_PHYSDEV_OP_ISIN XT_PHYSDEV_OP_ISIN -#define IP6T_PHYSDEV_OP_ISOUT XT_PHYSDEV_OP_ISOUT -#define IP6T_PHYSDEV_OP_MASK XT_PHYSDEV_OP_MASK - -#define ip6t_physdev_info xt_physdev_info - -#endif /*_IP6T_PHYSDEV_H*/ diff --git a/include/linux/netfilter_ipv6/ip6t_policy.h b/include/linux/netfilter_ipv6/ip6t_policy.h deleted file mode 100644 index b1c449d7ec89..000000000000 --- a/include/linux/netfilter_ipv6/ip6t_policy.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef _IP6T_POLICY_H -#define _IP6T_POLICY_H - -#include - -#define IP6T_POLICY_MAX_ELEM XT_POLICY_MAX_ELEM - -/* ip6t_policy_flags */ -#define IP6T_POLICY_MATCH_IN XT_POLICY_MATCH_IN -#define IP6T_POLICY_MATCH_OUT XT_POLICY_MATCH_OUT -#define IP6T_POLICY_MATCH_NONE XT_POLICY_MATCH_NONE -#define IP6T_POLICY_MATCH_STRICT XT_POLICY_MATCH_STRICT - -/* ip6t_policy_modes */ -#define IP6T_POLICY_MODE_TRANSPORT XT_POLICY_MODE_TRANSPORT -#define IP6T_POLICY_MODE_TUNNEL XT_POLICY_MODE_TUNNEL - -#define ip6t_policy_spec xt_policy_spec -#define ip6t_policy_addr xt_policy_addr -#define ip6t_policy_elem xt_policy_elem -#define ip6t_policy_info xt_policy_info - -#endif /* _IP6T_POLICY_H */ -- cgit v1.2.3 From 98d89b4198cf7273968e9217a62ec7ccfd760171 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Sun, 5 Jul 2009 15:55:06 +0200 Subject: netfilter: xtables: realign struct xt_target_param This commit gets rid of a padding hole as reported by pahole(1). Saves 8 bytes on x86_64. Signed-off-by: Jan Engelhardt --- include/linux/netfilter/x_tables.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h index 1030b7593898..4fa6e4c263e0 100644 --- a/include/linux/netfilter/x_tables.h +++ b/include/linux/netfilter/x_tables.h @@ -238,9 +238,9 @@ struct xt_mtdtor_param { */ struct xt_target_param { const struct net_device *in, *out; - unsigned int hooknum; const struct xt_target *target; const void *targinfo; + unsigned int hooknum; u_int8_t family; }; -- cgit v1.2.3 From 25a70e38cd57952b09a013bf070e03705ee4f2ff Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 12 Aug 2009 00:50:09 -0700 Subject: Input: eeti_ts - allow active high irq lines This adds a struct eeti_ts_platform_data which currently holds only one value to specify the interrupt polarity. The driver has a fallback if no platform data is passed in via the i2c_board_info, so no regression is caused. Signed-off-by: Daniel Mack Signed-off-by: Dmitry Torokhov --- include/linux/input/eeti_ts.h | 9 +++++++++ 1 file changed, 9 insertions(+) create mode 100644 include/linux/input/eeti_ts.h (limited to 'include/linux') diff --git a/include/linux/input/eeti_ts.h b/include/linux/input/eeti_ts.h new file mode 100644 index 000000000000..f875b316249d --- /dev/null +++ b/include/linux/input/eeti_ts.h @@ -0,0 +1,9 @@ +#ifndef LINUX_INPUT_EETI_TS_H +#define LINUX_INPUT_EETI_TS_H + +struct eeti_ts_platform_data { + unsigned int irq_active_high; +}; + +#endif /* LINUX_INPUT_EETI_TS_H */ + -- cgit v1.2.3 From 78090a58c49f2f6213d0bb1b3b4c4df73e26865f Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Fri, 7 Aug 2009 02:58:38 +0000 Subject: nl802154: make ieee802154_policy constant Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: David S. Miller --- include/linux/nl802154.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/nl802154.h b/include/linux/nl802154.h index 2cda00ccfcca..266dd96ced96 100644 --- a/include/linux/nl802154.h +++ b/include/linux/nl802154.h @@ -69,7 +69,7 @@ enum { #define IEEE802154_ATTR_MAX (__IEEE802154_ATTR_MAX - 1) -extern struct nla_policy ieee802154_policy[]; +extern const struct nla_policy ieee802154_policy[]; /* commands */ /* REQ should be responded with CONF -- cgit v1.2.3 From 8e753dd0a82bd266256c20a20b98dfa48f98d21e Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Fri, 7 Aug 2009 02:58:40 +0000 Subject: nl802154: add support for dumping WPAN interface information Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: David S. Miller --- include/linux/nl802154.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl802154.h b/include/linux/nl802154.h index 266dd96ced96..9a1af5f871a3 100644 --- a/include/linux/nl802154.h +++ b/include/linux/nl802154.h @@ -111,6 +111,8 @@ enum { IEEE802154_RX_ENABLE_REQ, /* Not supported yet */ IEEE802154_RX_ENABLE_CONF, /* Not supported yet */ + IEEE802154_LIST_IFACE, + __IEEE802154_CMD_MAX, }; -- cgit v1.2.3 From aed7df86983ead0af8364fd26d8a9609ef2ed584 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Sun, 9 Aug 2009 03:27:18 +0000 Subject: net: include/linux/icmpv6: includecheck fix for icmpv6.h fix the following 'make includecheck' warning: include/linux/icmpv6.h: linux/skbuff.h is included more than once. Signed-off-by: Jaswinder Singh Rajput Signed-off-by: David S. Miller --- include/linux/icmpv6.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/icmpv6.h b/include/linux/icmpv6.h index b6a85183c333..c0d8357917e2 100644 --- a/include/linux/icmpv6.h +++ b/include/linux/icmpv6.h @@ -171,8 +171,6 @@ struct icmp6_filter { #ifdef __KERNEL__ #include -#include - extern void icmpv6_send(struct sk_buff *skb, u8 type, u8 code, -- cgit v1.2.3 From 2e955856ff1212bd63dbbf403940c72eca5b4a8f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?fran=C3=A7ois=20romieu?= Date: Mon, 10 Aug 2009 19:44:19 +0000 Subject: r8169: phy init for the 8169scd Synced with Realtek's 6.011.00 r8169 driver. Signed-off-by: Francois Romieu Cc: Edward Hsu Signed-off-by: David S. Miller --- include/linux/pci_ids.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 73b46b6b904f..fdc3110c90c0 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1984,6 +1984,8 @@ #define PCI_VENDOR_ID_SAMSUNG 0x144d +#define PCI_VENDOR_ID_GIGABYTE 0x1458 + #define PCI_VENDOR_ID_AMBIT 0x1468 #define PCI_VENDOR_ID_MYRICOM 0x14c1 -- cgit v1.2.3 From 00ae4064b1445524752575dd84df227c0687c99d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 14 Aug 2009 15:00:49 +0900 Subject: percpu: rename 4k first chunk allocator to page Page size isn't always 4k depending on arch and configuration. Rename 4k first chunk allocator to page. Signed-off-by: Tejun Heo Cc: David Howells --- include/linux/percpu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/percpu.h b/include/linux/percpu.h index e134c8229631..7989f61b03f3 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -74,7 +74,7 @@ extern ssize_t __init pcpu_embed_first_chunk( size_t static_size, size_t reserved_size, ssize_t dyn_size); -extern ssize_t __init pcpu_4k_first_chunk( +extern ssize_t __init pcpu_page_first_chunk( size_t static_size, size_t reserved_size, pcpu_fc_alloc_fn_t alloc_fn, pcpu_fc_free_fn_t free_fn, -- cgit v1.2.3 From 08fc45806103e59a37418e84719b878f9bb32540 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 14 Aug 2009 15:00:49 +0900 Subject: percpu: build first chunk allocators selectively There's no need to build unused first chunk allocators in. Define CONFIG_NEED_PER_CPU_*_FIRST_CHUNK and let archs enable them selectively. Signed-off-by: Tejun Heo --- include/linux/percpu.h | 27 +++++---------------------- 1 file changed, 5 insertions(+), 22 deletions(-) (limited to 'include/linux') diff --git a/include/linux/percpu.h b/include/linux/percpu.h index 7989f61b03f3..e26788e0da4a 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -70,17 +70,21 @@ extern size_t __init pcpu_setup_first_chunk( ssize_t dyn_size, size_t unit_size, void *base_addr, const int *unit_map); +#ifdef CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK extern ssize_t __init pcpu_embed_first_chunk( size_t static_size, size_t reserved_size, ssize_t dyn_size); +#endif +#ifdef CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK extern ssize_t __init pcpu_page_first_chunk( size_t static_size, size_t reserved_size, pcpu_fc_alloc_fn_t alloc_fn, pcpu_fc_free_fn_t free_fn, pcpu_fc_populate_pte_fn_t populate_pte_fn); +#endif -#ifdef CONFIG_NEED_MULTIPLE_NODES +#ifdef CONFIG_NEED_PER_CPU_LPAGE_FIRST_CHUNK extern int __init pcpu_lpage_build_unit_map( size_t static_size, size_t reserved_size, ssize_t *dyn_sizep, size_t *unit_sizep, @@ -98,27 +102,6 @@ extern ssize_t __init pcpu_lpage_first_chunk( extern void *pcpu_lpage_remapped(void *kaddr); #else -static inline int pcpu_lpage_build_unit_map( - size_t static_size, size_t reserved_size, - ssize_t *dyn_sizep, size_t *unit_sizep, - size_t lpage_size, int *unit_map, - pcpu_fc_cpu_distance_fn_t cpu_distance_fn) -{ - return -EINVAL; -} - -static inline ssize_t __init pcpu_lpage_first_chunk( - size_t static_size, size_t reserved_size, - size_t dyn_size, size_t unit_size, - size_t lpage_size, const int *unit_map, - int nr_units, - pcpu_fc_alloc_fn_t alloc_fn, - pcpu_fc_free_fn_t free_fn, - pcpu_fc_map_fn_t map_fn) -{ - return -EINVAL; -} - static inline void *pcpu_lpage_remapped(void *kaddr) { return NULL; -- cgit v1.2.3 From f58dc01ba2ca9fe3ab2ba4ca43d9c8a735cf62d8 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 14 Aug 2009 15:00:50 +0900 Subject: percpu: generalize first chunk allocator selection Now that all first chunk allocators are in mm/percpu.c, it makes sense to make generalize percpu_alloc kernel parameter. Define PCPU_FC_* and set pcpu_chosen_fc using early_param() in mm/percpu.c. Arch code can use the set value to determine which first chunk allocator to use. Signed-off-by: Tejun Heo --- include/linux/percpu.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/linux') diff --git a/include/linux/percpu.h b/include/linux/percpu.h index e26788e0da4a..9be05cbe5ee0 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -59,6 +59,18 @@ extern void *pcpu_base_addr; extern const int *pcpu_unit_map; +enum pcpu_fc { + PCPU_FC_AUTO, + PCPU_FC_EMBED, + PCPU_FC_PAGE, + PCPU_FC_LPAGE, + + PCPU_FC_NR, +}; +extern const char *pcpu_fc_names[PCPU_FC_NR]; + +extern enum pcpu_fc pcpu_chosen_fc; + typedef void * (*pcpu_fc_alloc_fn_t)(unsigned int cpu, size_t size); typedef void (*pcpu_fc_free_fn_t)(void *ptr, size_t size); typedef void (*pcpu_fc_populate_pte_fn_t)(unsigned long addr); -- cgit v1.2.3 From 9a7737691e90d3cce0e5248f91826c50e5aa3fcf Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 14 Aug 2009 15:00:50 +0900 Subject: percpu: drop @static_size from first chunk allocators First chunk allocators assume percpu areas have been linked using one of PERCPU_*() macros and depend on __per_cpu_load symbol defined by those macros, so there isn't much point in passing in static area size explicitly when it can be easily calculated from __per_cpu_start and __per_cpu_end. Drop @static_size from all percpu first chunk allocators and helpers. Signed-off-by: Tejun Heo --- include/linux/percpu.h | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) (limited to 'include/linux') diff --git a/include/linux/percpu.h b/include/linux/percpu.h index 9be05cbe5ee0..be2fc8fb9b6f 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -84,13 +84,12 @@ extern size_t __init pcpu_setup_first_chunk( #ifdef CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK extern ssize_t __init pcpu_embed_first_chunk( - size_t static_size, size_t reserved_size, - ssize_t dyn_size); + size_t reserved_size, ssize_t dyn_size); #endif #ifdef CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK extern ssize_t __init pcpu_page_first_chunk( - size_t static_size, size_t reserved_size, + size_t reserved_size, pcpu_fc_alloc_fn_t alloc_fn, pcpu_fc_free_fn_t free_fn, pcpu_fc_populate_pte_fn_t populate_pte_fn); @@ -98,16 +97,15 @@ extern ssize_t __init pcpu_page_first_chunk( #ifdef CONFIG_NEED_PER_CPU_LPAGE_FIRST_CHUNK extern int __init pcpu_lpage_build_unit_map( - size_t static_size, size_t reserved_size, - ssize_t *dyn_sizep, size_t *unit_sizep, - size_t lpage_size, int *unit_map, + size_t reserved_size, ssize_t *dyn_sizep, + size_t *unit_sizep, size_t lpage_size, + int *unit_map, pcpu_fc_cpu_distance_fn_t cpu_distance_fn); extern ssize_t __init pcpu_lpage_first_chunk( - size_t static_size, size_t reserved_size, - size_t dyn_size, size_t unit_size, - size_t lpage_size, const int *unit_map, - int nr_units, + size_t reserved_size, size_t dyn_size, + size_t unit_size, size_t lpage_size, + const int *unit_map, int nr_units, pcpu_fc_alloc_fn_t alloc_fn, pcpu_fc_free_fn_t free_fn, pcpu_fc_map_fn_t map_fn); -- cgit v1.2.3 From 1d9d32572163b30be81dbe1409dfa7ea9763d0e8 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 14 Aug 2009 15:00:50 +0900 Subject: percpu: make @dyn_size mandatory for pcpu_setup_first_chunk() Now that all actual first chunk allocation and copying happen in the first chunk allocators and helpers, there's no reason for pcpu_setup_first_chunk() to try to determine @dyn_size automatically. The only left user is page first chunk allocator. Make it determine dyn_size like other allocators and make @dyn_size mandatory for pcpu_setup_first_chunk(). Signed-off-by: Tejun Heo --- include/linux/percpu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/percpu.h b/include/linux/percpu.h index be2fc8fb9b6f..0cfdd14d096a 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -79,7 +79,7 @@ typedef void (*pcpu_fc_map_fn_t)(void *ptr, size_t size, void *addr); extern size_t __init pcpu_setup_first_chunk( size_t static_size, size_t reserved_size, - ssize_t dyn_size, size_t unit_size, + size_t dyn_size, size_t unit_size, void *base_addr, const int *unit_map); #ifdef CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK -- cgit v1.2.3 From 3cbc85652767c38b252c8de55f9fd180b29e4c0d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 14 Aug 2009 15:00:50 +0900 Subject: percpu: add @align to pcpu_fc_alloc_fn_t pcpu_fc_alloc_fn_t is about to see more interesting usage, add @align parameter. Signed-off-by: Tejun Heo --- include/linux/percpu.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/percpu.h b/include/linux/percpu.h index 0cfdd14d096a..d385dbcf190b 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -71,7 +71,8 @@ extern const char *pcpu_fc_names[PCPU_FC_NR]; extern enum pcpu_fc pcpu_chosen_fc; -typedef void * (*pcpu_fc_alloc_fn_t)(unsigned int cpu, size_t size); +typedef void * (*pcpu_fc_alloc_fn_t)(unsigned int cpu, size_t size, + size_t align); typedef void (*pcpu_fc_free_fn_t)(void *ptr, size_t size); typedef void (*pcpu_fc_populate_pte_fn_t)(unsigned long addr); typedef int (pcpu_fc_cpu_distance_fn_t)(unsigned int from, unsigned int to); -- cgit v1.2.3 From 033e48fb82958053113178264ddb9d5038d5e38b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 14 Aug 2009 15:00:51 +0900 Subject: percpu: move pcpu_lpage_build_unit_map() and pcpul_lpage_dump_cfg() upward Unit map handling will be generalized and extended and used for embedding sparse first chunk and other purposes. Relocate two unit_map related functions upward in preparation. This patch just moves the code without any actual change. Signed-off-by: Tejun Heo --- include/linux/percpu.h | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/percpu.h b/include/linux/percpu.h index d385dbcf190b..570fb18de2ba 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -78,6 +78,14 @@ typedef void (*pcpu_fc_populate_pte_fn_t)(unsigned long addr); typedef int (pcpu_fc_cpu_distance_fn_t)(unsigned int from, unsigned int to); typedef void (*pcpu_fc_map_fn_t)(void *ptr, size_t size, void *addr); +#ifdef CONFIG_NEED_PER_CPU_LPAGE_FIRST_CHUNK +extern int __init pcpu_lpage_build_unit_map( + size_t reserved_size, ssize_t *dyn_sizep, + size_t *unit_sizep, size_t lpage_size, + int *unit_map, + pcpu_fc_cpu_distance_fn_t cpu_distance_fn); +#endif + extern size_t __init pcpu_setup_first_chunk( size_t static_size, size_t reserved_size, size_t dyn_size, size_t unit_size, @@ -97,12 +105,6 @@ extern ssize_t __init pcpu_page_first_chunk( #endif #ifdef CONFIG_NEED_PER_CPU_LPAGE_FIRST_CHUNK -extern int __init pcpu_lpage_build_unit_map( - size_t reserved_size, ssize_t *dyn_sizep, - size_t *unit_sizep, size_t lpage_size, - int *unit_map, - pcpu_fc_cpu_distance_fn_t cpu_distance_fn); - extern ssize_t __init pcpu_lpage_first_chunk( size_t reserved_size, size_t dyn_size, size_t unit_size, size_t lpage_size, -- cgit v1.2.3 From fd1e8a1fe2b54df6c185b4fa65f181f50b9c4d4e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 14 Aug 2009 15:00:51 +0900 Subject: percpu: introduce pcpu_alloc_info and pcpu_group_info Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: Tejun Heo Cc: Ingo Molnar Cc: David Miller --- include/linux/percpu.h | 42 +++++++++++++++++++++++++++++------------- 1 file changed, 29 insertions(+), 13 deletions(-) (limited to 'include/linux') diff --git a/include/linux/percpu.h b/include/linux/percpu.h index 570fb18de2ba..77b86be8ce4f 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -59,6 +59,25 @@ extern void *pcpu_base_addr; extern const int *pcpu_unit_map; +struct pcpu_group_info { + int nr_units; /* aligned # of units */ + unsigned long base_offset; /* base address offset */ + unsigned int *cpu_map; /* unit->cpu map, empty + * entries contain NR_CPUS */ +}; + +struct pcpu_alloc_info { + size_t static_size; + size_t reserved_size; + size_t dyn_size; + size_t unit_size; + size_t atom_size; + size_t alloc_size; + size_t __ai_size; /* internal, don't use */ + int nr_groups; /* 0 if grouping unnecessary */ + struct pcpu_group_info groups[]; +}; + enum pcpu_fc { PCPU_FC_AUTO, PCPU_FC_EMBED, @@ -78,18 +97,17 @@ typedef void (*pcpu_fc_populate_pte_fn_t)(unsigned long addr); typedef int (pcpu_fc_cpu_distance_fn_t)(unsigned int from, unsigned int to); typedef void (*pcpu_fc_map_fn_t)(void *ptr, size_t size, void *addr); -#ifdef CONFIG_NEED_PER_CPU_LPAGE_FIRST_CHUNK -extern int __init pcpu_lpage_build_unit_map( - size_t reserved_size, ssize_t *dyn_sizep, - size_t *unit_sizep, size_t lpage_size, - int *unit_map, +extern struct pcpu_alloc_info * __init pcpu_alloc_alloc_info(int nr_groups, + int nr_units); +extern void __init pcpu_free_alloc_info(struct pcpu_alloc_info *ai); + +extern struct pcpu_alloc_info * __init pcpu_build_alloc_info( + size_t reserved_size, ssize_t dyn_size, + size_t atom_size, pcpu_fc_cpu_distance_fn_t cpu_distance_fn); -#endif -extern size_t __init pcpu_setup_first_chunk( - size_t static_size, size_t reserved_size, - size_t dyn_size, size_t unit_size, - void *base_addr, const int *unit_map); +extern size_t __init pcpu_setup_first_chunk(const struct pcpu_alloc_info *ai, + void *base_addr); #ifdef CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK extern ssize_t __init pcpu_embed_first_chunk( @@ -106,9 +124,7 @@ extern ssize_t __init pcpu_page_first_chunk( #ifdef CONFIG_NEED_PER_CPU_LPAGE_FIRST_CHUNK extern ssize_t __init pcpu_lpage_first_chunk( - size_t reserved_size, size_t dyn_size, - size_t unit_size, size_t lpage_size, - const int *unit_map, int nr_units, + const struct pcpu_alloc_info *ai, pcpu_fc_alloc_fn_t alloc_fn, pcpu_fc_free_fn_t free_fn, pcpu_fc_map_fn_t map_fn); -- cgit v1.2.3 From fb435d5233f8b6f9b93c11d6304d8e98fed03234 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 14 Aug 2009 15:00:51 +0900 Subject: percpu: add pcpu_unit_offsets[] Currently units are mapped sequentially into address space. This patch adds pcpu_unit_offsets[] which allows units to be mapped to arbitrary offsets from the chunk base address. This is necessary to allow sparse embedding which might would need to allocate address ranges and memory areas which aren't aligned to unit size but allocation atom size (page or large page size). This also simplifies things a bit by removing the need to calculate offset from unit number. With this change, there's no need for the arch code to know pcpu_unit_size. Update pcpu_setup_first_chunk() and first chunk allocators to return regular 0 or -errno return code instead of unit size or -errno. Signed-off-by: Tejun Heo Cc: David S. Miller --- include/linux/percpu.h | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) (limited to 'include/linux') diff --git a/include/linux/percpu.h b/include/linux/percpu.h index 77b86be8ce4f..a7ec840f596c 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -57,7 +57,7 @@ #endif extern void *pcpu_base_addr; -extern const int *pcpu_unit_map; +extern const unsigned long *pcpu_unit_offsets; struct pcpu_group_info { int nr_units; /* aligned # of units */ @@ -106,25 +106,23 @@ extern struct pcpu_alloc_info * __init pcpu_build_alloc_info( size_t atom_size, pcpu_fc_cpu_distance_fn_t cpu_distance_fn); -extern size_t __init pcpu_setup_first_chunk(const struct pcpu_alloc_info *ai, - void *base_addr); +extern int __init pcpu_setup_first_chunk(const struct pcpu_alloc_info *ai, + void *base_addr); #ifdef CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK -extern ssize_t __init pcpu_embed_first_chunk( - size_t reserved_size, ssize_t dyn_size); +extern int __init pcpu_embed_first_chunk(size_t reserved_size, + ssize_t dyn_size); #endif #ifdef CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK -extern ssize_t __init pcpu_page_first_chunk( - size_t reserved_size, +extern int __init pcpu_page_first_chunk(size_t reserved_size, pcpu_fc_alloc_fn_t alloc_fn, pcpu_fc_free_fn_t free_fn, pcpu_fc_populate_pte_fn_t populate_pte_fn); #endif #ifdef CONFIG_NEED_PER_CPU_LPAGE_FIRST_CHUNK -extern ssize_t __init pcpu_lpage_first_chunk( - const struct pcpu_alloc_info *ai, +extern int __init pcpu_lpage_first_chunk(const struct pcpu_alloc_info *ai, pcpu_fc_alloc_fn_t alloc_fn, pcpu_fc_free_fn_t free_fn, pcpu_fc_map_fn_t map_fn); -- cgit v1.2.3 From ca23e405e06d5fffb005df004c72781f76062f51 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 14 Aug 2009 15:00:52 +0900 Subject: vmalloc: implement pcpu_get_vm_areas() To directly use spread NUMA memories for percpu units, percpu allocator will be updated to allow sparsely mapping units in a chunk. As the distances between units can be very large, this makes allocating single vmap area for each chunk undesirable. This patch implements pcpu_get_vm_areas() and pcpu_free_vm_areas() which allocates and frees sparse congruent vmap areas. pcpu_get_vm_areas() take @offsets and @sizes array which define distances and sizes of vmap areas. It scans down from the top of vmalloc area looking for the top-most address which can accomodate all the areas. The top-down scan is to avoid interacting with regular vmallocs which can push up these congruent areas up little by little ending up wasting address space and page table. To speed up top-down scan, the highest possible address hint is maintained. Although the scan is linear from the hint, given the usual large holes between memory addresses between NUMA nodes, the scanning is highly likely to finish after finding the first hole for the last unit which is scanned first. Signed-off-by: Tejun Heo Cc: Nick Piggin --- include/linux/vmalloc.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h index a43ebec3a7b9..227c2a585e4f 100644 --- a/include/linux/vmalloc.h +++ b/include/linux/vmalloc.h @@ -115,4 +115,10 @@ extern rwlock_t vmlist_lock; extern struct vm_struct *vmlist; extern __init void vm_area_register_early(struct vm_struct *vm, size_t align); +struct vm_struct **pcpu_get_vm_areas(const unsigned long *offsets, + const size_t *sizes, int nr_vms, + size_t align, gfp_t gfp_mask); + +void pcpu_free_vm_areas(struct vm_struct **vms, int nr_vms); + #endif /* _LINUX_VMALLOC_H */ -- cgit v1.2.3 From c8826dd538602d730ed2c18c6753f1bbfa6c4933 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 14 Aug 2009 15:00:52 +0900 Subject: percpu: update embedding first chunk allocator to handle sparse units Now that percpu core can handle very sparse units, given that vmalloc space is large enough, embedding first chunk allocator can use any memory to build the first chunk. This patch teaches pcpu_embed_first_chunk() about distances between cpus and to use alloc/free callbacks to allocate node specific areas for each group and use them for the first chunk. This brings the benefits of embedding allocator to NUMA configurations - no extra TLB pressure with the flexibility of unified dynamic allocator and no need to restructure arch code to build memory layout suitable for percpu. With units put into atom_size aligned groups according to cpu distances, using large page for dynamic chunks is also easily possible with falling back to reuglar pages if large allocation fails. Embedding allocator users are converted to specify NULL cpu_distance_fn, so this patch doesn't cause any visible behavior difference. Following patches will convert them. Signed-off-by: Tejun Heo --- include/linux/percpu.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/percpu.h b/include/linux/percpu.h index a7ec840f596c..25359932740e 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -110,8 +110,11 @@ extern int __init pcpu_setup_first_chunk(const struct pcpu_alloc_info *ai, void *base_addr); #ifdef CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK -extern int __init pcpu_embed_first_chunk(size_t reserved_size, - ssize_t dyn_size); +extern int __init pcpu_embed_first_chunk(size_t reserved_size, ssize_t dyn_size, + size_t atom_size, + pcpu_fc_cpu_distance_fn_t cpu_distance_fn, + pcpu_fc_alloc_fn_t alloc_fn, + pcpu_fc_free_fn_t free_fn); #endif #ifdef CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK -- cgit v1.2.3 From e933a73f48e3b2d40cfa56d81e2646f194b5a66a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 14 Aug 2009 15:00:53 +0900 Subject: percpu: kill lpage first chunk allocator With x86 converted to embedding allocator, lpage doesn't have any user left. Kill it along with cpa handling code. Signed-off-by: Tejun Heo Cc: Jan Beulich --- include/linux/percpu.h | 16 ---------------- 1 file changed, 16 deletions(-) (limited to 'include/linux') diff --git a/include/linux/percpu.h b/include/linux/percpu.h index 25359932740e..878836ca999c 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -82,7 +82,6 @@ enum pcpu_fc { PCPU_FC_AUTO, PCPU_FC_EMBED, PCPU_FC_PAGE, - PCPU_FC_LPAGE, PCPU_FC_NR, }; @@ -95,7 +94,6 @@ typedef void * (*pcpu_fc_alloc_fn_t)(unsigned int cpu, size_t size, typedef void (*pcpu_fc_free_fn_t)(void *ptr, size_t size); typedef void (*pcpu_fc_populate_pte_fn_t)(unsigned long addr); typedef int (pcpu_fc_cpu_distance_fn_t)(unsigned int from, unsigned int to); -typedef void (*pcpu_fc_map_fn_t)(void *ptr, size_t size, void *addr); extern struct pcpu_alloc_info * __init pcpu_alloc_alloc_info(int nr_groups, int nr_units); @@ -124,20 +122,6 @@ extern int __init pcpu_page_first_chunk(size_t reserved_size, pcpu_fc_populate_pte_fn_t populate_pte_fn); #endif -#ifdef CONFIG_NEED_PER_CPU_LPAGE_FIRST_CHUNK -extern int __init pcpu_lpage_first_chunk(const struct pcpu_alloc_info *ai, - pcpu_fc_alloc_fn_t alloc_fn, - pcpu_fc_free_fn_t free_fn, - pcpu_fc_map_fn_t map_fn); - -extern void *pcpu_lpage_remapped(void *kaddr); -#else -static inline void *pcpu_lpage_remapped(void *kaddr) -{ - return NULL; -} -#endif - /* * Use this to get to a cpu's version of the per-cpu object * dynamically allocated. Non-atomic access to the current CPU's -- cgit v1.2.3 From f5ea9120be2e5d5c846243416cfdce01d02f5836 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 7 Aug 2009 16:17:38 +0200 Subject: nl80211: add generation number to all dumps In order for userspace to be able to figure out whether it obtained a consistent snapshot of data or not when using netlink dumps, we need to have a generation number in each dump message that indicates whether the list has changed or not -- its value is arbitrary. This patch adds such a number to all dumps, this needs some mac80211 involvement to keep track of a generation number to start with when adding/removing mesh paths or stations. The wiphy and netdev lists can be fully handled within cfg80211, of course, but generation numbers need to be stored there as well. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/nl80211.h | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index cb3dc6027fd9..a8d71ed43a0e 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -480,10 +480,6 @@ enum nl80211_commands { * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz) * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive * scanning and include a zero-length SSID (wildcard) for wildcard scan - * @NL80211_ATTR_SCAN_GENERATION: the scan generation increases whenever the - * scan result list changes (BSS expired or added) so that applications - * can verify that they got a single, consistent snapshot (when all dump - * messages carried the same generation number) * @NL80211_ATTR_BSS: scan result BSS * * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain @@ -580,6 +576,14 @@ enum nl80211_commands { * * @NL80211_ATTR_PID: Process ID of a network namespace. * + * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for + * dumps. This number increases whenever the object list being + * dumped changes, and as such userspace can verify that it has + * obtained a complete and consistent snapshot by verifying that + * all dump messages contain the same generation number. If it + * changed then the list changed and the dump should be repeated + * completely from scratch. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -651,7 +655,7 @@ enum nl80211_attrs { NL80211_ATTR_SCAN_FREQUENCIES, NL80211_ATTR_SCAN_SSIDS, - NL80211_ATTR_SCAN_GENERATION, + NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */ NL80211_ATTR_BSS, NL80211_ATTR_REG_INITIATOR, @@ -716,6 +720,9 @@ enum nl80211_attrs { NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1 }; +/* source-level API compatibility */ +#define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION + /* * Allow user space programs to use #ifdef on new attributes by defining them * here -- cgit v1.2.3 From f679056b2fdd4e9b7c8eb42ba447cd9646236305 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?G=C3=A1bor=20Stefanik?= Date: Mon, 10 Aug 2009 21:23:08 +0200 Subject: ssb: Implement the remaining rev.8 SPROM vars needed for LP-PHY MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Also add a "SPEX32" macro for extracting 32-bit SPROM variables. Signed-off-by: Gábor Stefanik Signed-off-by: John W. Linville --- include/linux/ssb/ssb.h | 44 ++++++++++++++++++++++++----- include/linux/ssb/ssb_regs.h | 66 +++++++++++++++++++++++++++++++++++++++----- 2 files changed, 96 insertions(+), 14 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h index 5ae8fa22d331..17ffc1f84d76 100644 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -27,24 +27,54 @@ struct ssb_sprom { u8 et1mdcport; /* MDIO for enet1 */ u8 board_rev; /* Board revision number from SPROM. */ u8 country_code; /* Country Code */ - u8 ant_available_a; /* A-PHY antenna available bits (up to 4) */ - u8 ant_available_bg; /* B/G-PHY antenna available bits (up to 4) */ + u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ + u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ u16 pa0b0; u16 pa0b1; u16 pa0b2; u16 pa1b0; u16 pa1b1; u16 pa1b2; + u16 pa1lob0; + u16 pa1lob1; + u16 pa1lob2; + u16 pa1hib0; + u16 pa1hib1; + u16 pa1hib2; u8 gpio0; /* GPIO pin 0 */ u8 gpio1; /* GPIO pin 1 */ u8 gpio2; /* GPIO pin 2 */ u8 gpio3; /* GPIO pin 3 */ - u16 maxpwr_a; /* A-PHY Amplifier Max Power (in dBm Q5.2) */ - u16 maxpwr_bg; /* B/G-PHY Amplifier Max Power (in dBm Q5.2) */ + u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ + u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ + u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ + u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ u8 itssi_a; /* Idle TSSI Target for A-PHY */ u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */ - u16 boardflags_lo; /* Boardflags (low 16 bits) */ - u16 boardflags_hi; /* Boardflags (high 16 bits) */ + u8 tri2g; /* 2.4GHz TX isolation */ + u8 tri5gl; /* 5.2GHz TX isolation */ + u8 tri5g; /* 5.3GHz TX isolation */ + u8 tri5gh; /* 5.8GHz TX isolation */ + u8 rxpo2g; /* 2GHz RX power offset */ + u8 rxpo5g; /* 5GHz RX power offset */ + u8 rssisav2g; /* 2GHz RSSI params */ + u8 rssismc2g; + u8 rssismf2g; + u8 bxa2g; /* 2GHz BX arch */ + u8 rssisav5g; /* 5GHz RSSI params */ + u8 rssismc5g; + u8 rssismf5g; + u8 bxa5g; /* 5GHz BX arch */ + u16 cck2gpo; /* CCK power offset */ + u32 ofdm2gpo; /* 2.4GHz OFDM power offset */ + u32 ofdm5glpo; /* 5.2GHz OFDM power offset */ + u32 ofdm5gpo; /* 5.3GHz OFDM power offset */ + u32 ofdm5ghpo; /* 5.8GHz OFDM power offset */ + u16 boardflags_lo; /* Board flags (bits 0-15) */ + u16 boardflags_hi; /* Board flags (bits 16-31) */ + u16 boardflags2_lo; /* Board flags (bits 32-47) */ + u16 boardflags2_hi; /* Board flags (bits 48-63) */ + /* TODO store board flags in a single u64 */ /* Antenna gain values for up to 4 antennas * on each band. Values in dBm/4 (Q5.2). Negative gain means the @@ -58,7 +88,7 @@ struct ssb_sprom { } ghz5; /* 5GHz band */ } antenna_gain; - /* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */ + /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ }; /* Information about the PCB the circuitry is soldered on. */ diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h index a01b982b5783..9ae9082eaeb4 100644 --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -162,7 +162,7 @@ /* SPROM shadow area. If not otherwise noted, fields are * two bytes wide. Note that the SPROM can _only_ be read - * in two-byte quantinies. + * in two-byte quantities. */ #define SSB_SPROMSIZE_WORDS 64 #define SSB_SPROMSIZE_BYTES (SSB_SPROMSIZE_WORDS * sizeof(u16)) @@ -327,8 +327,11 @@ #define SSB_SPROM5_GPIOB_P3_SHIFT 8 /* SPROM Revision 8 */ -#define SSB_SPROM8_BFLLO 0x1084 /* Boardflags (low 16 bits) */ -#define SSB_SPROM8_BFLHI 0x1086 /* Boardflags Hi */ +#define SSB_SPROM8_BOARDREV 0x1082 /* Board revision */ +#define SSB_SPROM8_BFLLO 0x1084 /* Board flags (bits 0-15) */ +#define SSB_SPROM8_BFLHI 0x1086 /* Board flags (bits 16-31) */ +#define SSB_SPROM8_BFL2LO 0x1088 /* Board flags (bits 32-47) */ +#define SSB_SPROM8_BFL2HI 0x108A /* Board flags (bits 48-63) */ #define SSB_SPROM8_IL0MAC 0x108C /* 6 byte MAC address */ #define SSB_SPROM8_CCODE 0x1092 /* 2 byte country code */ #define SSB_SPROM8_ANTAVAIL 0x109C /* Antenna available bitfields*/ @@ -354,14 +357,63 @@ #define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ #define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ #define SSB_SPROM8_GPIOB_P3_SHIFT 8 -#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power BG in path 1 */ -#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */ +#define SSB_SPROM8_RSSIPARM2G 0x10A4 /* RSSI params for 2GHz */ +#define SSB_SPROM8_RSSISMF2G 0x000F +#define SSB_SPROM8_RSSISMC2G 0x00F0 +#define SSB_SPROM8_RSSISMC2G_SHIFT 4 +#define SSB_SPROM8_RSSISAV2G 0x0700 +#define SSB_SPROM8_RSSISAV2G_SHIFT 8 +#define SSB_SPROM8_BXA2G 0x1800 +#define SSB_SPROM8_BXA2G_SHIFT 11 +#define SSB_SPROM8_RSSIPARM5G 0x10A6 /* RSSI params for 5GHz */ +#define SSB_SPROM8_RSSISMF5G 0x000F +#define SSB_SPROM8_RSSISMC5G 0x00F0 +#define SSB_SPROM8_RSSISMC5G_SHIFT 4 +#define SSB_SPROM8_RSSISAV5G 0x0700 +#define SSB_SPROM8_RSSISAV5G_SHIFT 8 +#define SSB_SPROM8_BXA5G 0x1800 +#define SSB_SPROM8_BXA5G_SHIFT 11 +#define SSB_SPROM8_TRI25G 0x10A8 /* TX isolation 2.4&5.3GHz */ +#define SSB_SPROM8_TRI2G 0x00FF /* TX isolation 2.4GHz */ +#define SSB_SPROM8_TRI5G 0xFF00 /* TX isolation 5.3GHz */ +#define SSB_SPROM8_TRI5G_SHIFT 8 +#define SSB_SPROM8_TRI5GHL 0x10AA /* TX isolation 5.2/5.8GHz */ +#define SSB_SPROM8_TRI5GL 0x00FF /* TX isolation 5.2GHz */ +#define SSB_SPROM8_TRI5GH 0xFF00 /* TX isolation 5.8GHz */ +#define SSB_SPROM8_TRI5GH_SHIFT 8 +#define SSB_SPROM8_RXPO 0x10AC /* RX power offsets */ +#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ +#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ +#define SSB_SPROM8_RXPO5G_SHIFT 8 +#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power 2GHz in path 1 */ +#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ #define SSB_SPROM8_ITSSI_BG_SHIFT 8 -#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power A in path 1 */ -#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power A */ +#define SSB_SPROM8_PA0B0 0x10C2 /* 2GHz power amp settings */ +#define SSB_SPROM8_PA0B1 0x10C4 +#define SSB_SPROM8_PA0B2 0x10C6 +#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power 5.3GHz */ +#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power 5.3GHz */ #define SSB_SPROM8_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */ #define SSB_SPROM8_ITSSI_A_SHIFT 8 +#define SSB_SPROM8_MAXP_AHL 0x10CA /* Max Power 5.2/5.8GHz */ +#define SSB_SPROM8_MAXP_AH_MASK 0x00FF /* Mask for Max Power 5.8GHz */ +#define SSB_SPROM8_MAXP_AL_MASK 0xFF00 /* Mask for Max Power 5.2GHz */ +#define SSB_SPROM8_MAXP_AL_SHIFT 8 +#define SSB_SPROM8_PA1B0 0x10CC /* 5.3GHz power amp settings */ +#define SSB_SPROM8_PA1B1 0x10CE +#define SSB_SPROM8_PA1B2 0x10D0 +#define SSB_SPROM8_PA1LOB0 0x10D2 /* 5.2GHz power amp settings */ +#define SSB_SPROM8_PA1LOB1 0x10D4 +#define SSB_SPROM8_PA1LOB2 0x10D6 +#define SSB_SPROM8_PA1HIB0 0x10D8 /* 5.8GHz power amp settings */ +#define SSB_SPROM8_PA1HIB1 0x10DA +#define SSB_SPROM8_PA1HIB2 0x10DC +#define SSB_SPROM8_CCK2GPO 0x1140 /* CCK power offset */ +#define SSB_SPROM8_OFDM2GPO 0x1142 /* 2.4GHz OFDM power offset */ +#define SSB_SPROM8_OFDM5GPO 0x1146 /* 5.3GHz OFDM power offset */ +#define SSB_SPROM8_OFDM5GLPO 0x114A /* 5.2GHz OFDM power offset */ +#define SSB_SPROM8_OFDM5GHPO 0x114E /* 5.8GHz OFDM power offset */ /* Values for SSB_SPROM1_BINF_CCODE */ enum { -- cgit v1.2.3 From 7834ddbcc7a097443761b0722e8c9fb8511b95b1 Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Tue, 11 Aug 2009 22:57:16 +0300 Subject: usbnet: add rx queue pausing Add rx queue pausing to usbnet. This is needed by rndis_wlan so that it can control rx queue and prevent received packets from being send forward before rndis_wlan receives and handles 'media connect'-indication. Without this establishing WPA connections is hard and fail often. [v2] - removed unneeded use of skb_clone Cc: David Brownell Signed-off-by: Jussi Kivilinna Signed-off-by: John W. Linville --- include/linux/usb/usbnet.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index de8b4b18961b..09514252d84e 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -53,6 +53,7 @@ struct usbnet { struct sk_buff_head rxq; struct sk_buff_head txq; struct sk_buff_head done; + struct sk_buff_head rxq_pause; struct urb *interrupt; struct tasklet_struct bh; @@ -63,6 +64,7 @@ struct usbnet { # define EVENT_RX_MEMORY 2 # define EVENT_STS_SPLIT 3 # define EVENT_LINK_RESET 4 +# define EVENT_RX_PAUSED 5 }; static inline struct usb_driver *driver_of(struct usb_interface *intf) @@ -190,6 +192,10 @@ extern void usbnet_defer_kevent (struct usbnet *, int); extern void usbnet_skb_return (struct usbnet *, struct sk_buff *); extern void usbnet_unlink_rx_urbs(struct usbnet *); +extern void usbnet_pause_rx(struct usbnet *); +extern void usbnet_resume_rx(struct usbnet *); +extern void usbnet_purge_paused_rxq(struct usbnet *); + extern int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd); extern int usbnet_set_settings (struct net_device *net, struct ethtool_cmd *cmd); extern u32 usbnet_get_link (struct net_device *net); -- cgit v1.2.3 From bb2af4f54ffa8245d5ce278cae9c66198bc14d8b Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Fri, 14 Aug 2009 12:41:57 +0000 Subject: net: Add NETIF_F_FCOE_MTU to indicate support for a different MTU for FCoE Add NETIF_F_FCOE_MTU to indicate that the NIC can support a secondary MTU for converged traffic of LAN and Fiber Channel over Ethernet (FCoE). The MTU for FCoE is 2158 = 14 (FCoE header) + 24 (FC header) + 2112 (FC max payload) + 4 (FC CRC) + 4 (FCoE trailer). Signed-off-by: Yi Zou Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- include/linux/netdevice.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 9f25ab2899de..9192cdf5bd2c 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -701,6 +701,7 @@ struct net_device /* the GSO_MASK reserves bits 16 through 23 */ #define NETIF_F_FCOE_CRC (1 << 24) /* FCoE CRC32 */ #define NETIF_F_SCTP_CSUM (1 << 25) /* SCTP checksum offload */ +#define NETIF_F_FCOE_MTU (1 << 26) /* Supports max FCoE MTU, 2158 bytes*/ /* Segmentation offload features */ #define NETIF_F_GSO_SHIFT 16 -- cgit v1.2.3 From 31089c13bcb18d2cd2a3ddfbe3a28666346f237e Mon Sep 17 00:00:00 2001 From: John Stultz Date: Fri, 14 Aug 2009 15:47:18 +0200 Subject: timekeeping: Introduce timekeeping_leap_insert Move the adjustment of xtime, wall_to_monotonic and the update of the vsyscall variables to the timekeeping code. Signed-off-by: John Stultz Signed-off-by: Martin Schwidefsky LKML-Reference: <20090814134807.609730216@de.ibm.com> Signed-off-by: Thomas Gleixner --- include/linux/time.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/time.h b/include/linux/time.h index ea16c1a01d51..e7c844558884 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -147,6 +147,7 @@ extern struct timespec timespec_trunc(struct timespec t, unsigned gran); extern int timekeeping_valid_for_hres(void); extern void update_wall_time(void); extern void update_xtime_cache(u64 nsec); +extern void timekeeping_leap_insert(int leapsecond); struct tms; extern void do_sys_times(struct tms *); -- cgit v1.2.3 From a0f7d48bfb95a4c5172a2756dbc4b82afc8e9ae4 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 14 Aug 2009 15:47:19 +0200 Subject: timekeeping: Remove clocksource inline functions The three inline functions clocksource_read, clocksource_enable and clocksource_disable are simple wrappers of an indirect call plus the copy from and to the mult_orig value. The functions are exclusively used by the timekeeping code which has intimate knowledge of the clocksource anyway. Therefore remove the inline functions. No functional change. Signed-off-by: Martin Schwidefsky Acked-by: John Stultz Cc: Daniel Walker LKML-Reference: <20090814134807.903108946@de.ibm.com> Signed-off-by: Thomas Gleixner --- include/linux/clocksource.h | 58 --------------------------------------------- 1 file changed, 58 deletions(-) (limited to 'include/linux') diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index 1219be4fb42e..a1ef46f61c81 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -267,64 +267,6 @@ static inline u32 clocksource_hz2mult(u32 hz, u32 shift_constant) return (u32)tmp; } -/** - * clocksource_read: - Access the clocksource's current cycle value - * @cs: pointer to clocksource being read - * - * Uses the clocksource to return the current cycle_t value - */ -static inline cycle_t clocksource_read(struct clocksource *cs) -{ - return cs->read(cs); -} - -/** - * clocksource_enable: - enable clocksource - * @cs: pointer to clocksource - * - * Enables the specified clocksource. The clocksource callback - * function should start up the hardware and setup mult and field - * members of struct clocksource to reflect hardware capabilities. - */ -static inline int clocksource_enable(struct clocksource *cs) -{ - int ret = 0; - - if (cs->enable) - ret = cs->enable(cs); - - /* - * The frequency may have changed while the clocksource - * was disabled. If so the code in ->enable() must update - * the mult value to reflect the new frequency. Make sure - * mult_orig follows this change. - */ - cs->mult_orig = cs->mult; - - return ret; -} - -/** - * clocksource_disable: - disable clocksource - * @cs: pointer to clocksource - * - * Disables the specified clocksource. The clocksource callback - * function should power down the now unused hardware block to - * save power. - */ -static inline void clocksource_disable(struct clocksource *cs) -{ - /* - * Save mult_orig in mult so clocksource_enable() can - * restore the value regardless if ->enable() updates - * the value of mult or not. - */ - cs->mult = cs->mult_orig; - - if (cs->disable) - cs->disable(cs); -} - /** * cyc2ns - converts clocksource cycles to nanoseconds * @cs: Pointer to clocksource -- cgit v1.2.3 From f1b82746c1e93daf24e1ab9bfbd39bcdb2e7018b Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 14 Aug 2009 15:47:21 +0200 Subject: clocksource: Cleanup clocksource selection If a non high-resolution clocksource is first set as override clock and then registered it becomes active even if the system is in one-shot mode. Move the override check from sysfs_override_clocksource to the clocksource selection. That fixes the bug and simplifies the code. The check in clocksource_register for double registration of the same clocksource is removed without replacement. To find the initial clocksource a new weak function in jiffies.c is defined that returns the jiffies clocksource. The architecture code can then override the weak function with a more suitable clocksource, e.g. the TOD clock on s390. [ tglx: Folded in a fix from John Stultz ] Signed-off-by: Martin Schwidefsky Acked-by: John Stultz Cc: Daniel Walker LKML-Reference: <20090814134808.388024160@de.ibm.com> Signed-off-by: Thomas Gleixner --- include/linux/clocksource.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index a1ef46f61c81..f263b3abf46e 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -322,6 +323,7 @@ extern void clocksource_touch_watchdog(void); extern struct clocksource* clocksource_get_next(void); extern void clocksource_change_rating(struct clocksource *cs, int rating); extern void clocksource_resume(void); +extern struct clocksource * __init __weak clocksource_default_clock(void); #ifdef CONFIG_GENERIC_TIME_VSYSCALL extern void update_vsyscall(struct timespec *ts, struct clocksource *c); -- cgit v1.2.3 From c55c87c892c1875deace0c8fc28787335277fdf2 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 14 Aug 2009 15:47:25 +0200 Subject: clocksource: Move watchdog downgrade to a work queue thread Move the downgrade of an unstable clocksource from the timer interrupt context into the process context of a work queue thread. This is needed to be able to do the clocksource switch with stop_machine. Signed-off-by: Martin Schwidefsky Cc: Ingo Molnar Acked-by: John Stultz Cc: Daniel Walker LKML-Reference: <20090814134809.354926067@de.ibm.com> Signed-off-by: Thomas Gleixner --- include/linux/clocksource.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index f263b3abf46e..19ad43af62d0 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -213,6 +213,7 @@ extern struct clocksource *clock; /* current clocksource */ #define CLOCK_SOURCE_WATCHDOG 0x10 #define CLOCK_SOURCE_VALID_FOR_HRES 0x20 +#define CLOCK_SOURCE_UNSTABLE 0x40 /* simplify initialization of mask field */ #define CLOCKSOURCE_MASK(bits) (cycle_t)((bits) < 64 ? ((1ULL<<(bits))-1) : -1) -- cgit v1.2.3 From 155ec60226ae0ae2aadaa57c951a58a359331030 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 14 Aug 2009 15:47:26 +0200 Subject: timekeeping: Introduce struct timekeeper Add struct timekeeper to keep the internal values timekeeping.c needs in regard to the currently selected clock source. This moves the timekeeping intervals, xtime_nsec and the ntp error value from struct clocksource to struct timekeeper. The raw_time is removed from the clocksource as well. It gets treated like xtime as a global variable. Eventually xtime raw_time should be moved to struct timekeeper. [ tglx: minor cleanup ] Signed-off-by: Martin Schwidefsky Cc: Ingo Molnar Acked-by: John Stultz Cc: Daniel Walker LKML-Reference: <20090814134809.613209842@de.ibm.com> Signed-off-by: Thomas Gleixner --- include/linux/clocksource.h | 54 ++++----------------------------------------- 1 file changed, 4 insertions(+), 50 deletions(-) (limited to 'include/linux') diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index 19ad43af62d0..e12e3095e2fb 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -155,8 +155,6 @@ extern u64 timecounter_cyc2time(struct timecounter *tc, * @flags: flags describing special properties * @vread: vsyscall based read * @resume: resume function for the clocksource, if necessary - * @cycle_interval: Used internally by timekeeping core, please ignore. - * @xtime_interval: Used internally by timekeeping core, please ignore. */ struct clocksource { /* @@ -182,19 +180,12 @@ struct clocksource { #define CLKSRC_FSYS_MMIO_SET(mmio, addr) do { } while (0) #endif - /* timekeeping specific data, ignore */ - cycle_t cycle_interval; - u64 xtime_interval; - u32 raw_interval; /* * Second part is written at each timer interrupt * Keep it in a different cache line to dirty no * more than one cache line. */ cycle_t cycle_last ____cacheline_aligned_in_smp; - u64 xtime_nsec; - s64 error; - struct timespec raw_time; #ifdef CONFIG_CLOCKSOURCE_WATCHDOG /* Watchdog related data, used by the framework */ @@ -203,8 +194,6 @@ struct clocksource { #endif }; -extern struct clocksource *clock; /* current clocksource */ - /* * Clock source flags bits:: */ @@ -270,50 +259,15 @@ static inline u32 clocksource_hz2mult(u32 hz, u32 shift_constant) } /** - * cyc2ns - converts clocksource cycles to nanoseconds - * @cs: Pointer to clocksource - * @cycles: Cycles + * clocksource_cyc2ns - converts clocksource cycles to nanoseconds * - * Uses the clocksource and ntp ajdustment to convert cycle_ts to nanoseconds. + * Converts cycles to nanoseconds, using the given mult and shift. * * XXX - This could use some mult_lxl_ll() asm optimization */ -static inline s64 cyc2ns(struct clocksource *cs, cycle_t cycles) +static inline s64 clocksource_cyc2ns(cycle_t cycles, u32 mult, u32 shift) { - u64 ret = (u64)cycles; - ret = (ret * cs->mult) >> cs->shift; - return ret; -} - -/** - * clocksource_calculate_interval - Calculates a clocksource interval struct - * - * @c: Pointer to clocksource. - * @length_nsec: Desired interval length in nanoseconds. - * - * Calculates a fixed cycle/nsec interval for a given clocksource/adjustment - * pair and interval request. - * - * Unless you're the timekeeping code, you should not be using this! - */ -static inline void clocksource_calculate_interval(struct clocksource *c, - unsigned long length_nsec) -{ - u64 tmp; - - /* Do the ns -> cycle conversion first, using original mult */ - tmp = length_nsec; - tmp <<= c->shift; - tmp += c->mult_orig/2; - do_div(tmp, c->mult_orig); - - c->cycle_interval = (cycle_t)tmp; - if (c->cycle_interval == 0) - c->cycle_interval = 1; - - /* Go back from cycles -> shifted ns, this time use ntp adjused mult */ - c->xtime_interval = (u64)c->cycle_interval * c->mult; - c->raw_interval = ((u64)c->cycle_interval * c->mult_orig) >> c->shift; + return ((u64) cycles * mult) >> shift; } -- cgit v1.2.3 From 0a54419836254a27baecd9037103171bcbabaf67 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 14 Aug 2009 15:47:28 +0200 Subject: timekeeping: Move NTP adjusted clock multiplier to struct timekeeper The clocksource structure has two multipliers, the unmodified multiplier clock->mult_orig and the NTP corrected multiplier clock->mult. The NTP multiplier is misplaced in the struct clocksource, this is private information of the timekeeping code. Add the mult field to the struct timekeeper to contain the NTP corrected value, keep the unmodifed multiplier in clock->mult and remove clock->mult_orig. Signed-off-by: Martin Schwidefsky Cc: Ingo Molnar Acked-by: John Stultz Cc: Daniel Walker LKML-Reference: <20090814134810.149047645@de.ibm.com> Signed-off-by: Thomas Gleixner --- include/linux/clocksource.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index e12e3095e2fb..e34015effeb6 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -149,8 +149,7 @@ extern u64 timecounter_cyc2time(struct timecounter *tc, * @disable: optional function to disable the clocksource * @mask: bitmask for two's complement * subtraction of non 64 bit counters - * @mult: cycle to nanosecond multiplier (adjusted by NTP) - * @mult_orig: cycle to nanosecond multiplier (unadjusted by NTP) + * @mult: cycle to nanosecond multiplier * @shift: cycle to nanosecond divisor (power of two) * @flags: flags describing special properties * @vread: vsyscall based read @@ -168,7 +167,6 @@ struct clocksource { void (*disable)(struct clocksource *cs); cycle_t mask; u32 mult; - u32 mult_orig; u32 shift; unsigned long flags; cycle_t (*vread)(void); -- cgit v1.2.3 From 75c5158f70c065b9704b924503d96e8297838f79 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 14 Aug 2009 15:47:30 +0200 Subject: timekeeping: Update clocksource with stop_machine update_wall_time calls change_clocksource HZ times per second to check if a new clock source is available. In close to 100% of all calls there is no new clock. Replace the tick based check by an update done with stop_machine. Signed-off-by: Martin Schwidefsky Cc: Ingo Molnar Acked-by: John Stultz Cc: Daniel Walker LKML-Reference: <20090814134810.711836357@de.ibm.com> Signed-off-by: Thomas Gleixner --- include/linux/clocksource.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index e34015effeb6..9ea40ff26f0e 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -291,4 +291,6 @@ static inline void update_vsyscall_tz(void) } #endif +extern void timekeeping_notify(struct clocksource *clock); + #endif /* _LINUX_CLOCKSOURCE_H */ -- cgit v1.2.3 From d4f587c67fc39e0030ddd718675e252e208da4d7 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 14 Aug 2009 15:47:31 +0200 Subject: timekeeping: Increase granularity of read_persistent_clock() The persistent clock of some architectures (e.g. s390) have a better granularity than seconds. To reduce the delta between the host clock and the guest clock in a virtualized system change the read_persistent_clock function to return a struct timespec. Signed-off-by: Martin Schwidefsky Cc: Ingo Molnar Acked-by: John Stultz Cc: Daniel Walker LKML-Reference: <20090814134811.013873340@de.ibm.com> Signed-off-by: Thomas Gleixner --- include/linux/time.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/time.h b/include/linux/time.h index e7c844558884..53a3216f0d1b 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -101,7 +101,7 @@ extern struct timespec xtime; extern struct timespec wall_to_monotonic; extern seqlock_t xtime_lock; -extern unsigned long read_persistent_clock(void); +extern void read_persistent_clock(struct timespec *ts); extern int update_persistent_clock(struct timespec now); extern int no_sync_cmos_clock __read_mostly; void timekeeping_init(void); -- cgit v1.2.3 From 23970e389e9cee43c4b41023935e1417271708b2 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 14 Aug 2009 15:47:32 +0200 Subject: timekeeping: Introduce read_boot_clock Add the new function read_boot_clock to get the exact time the system has been started. For architectures without support for exact boot time a new weak function is added that returns 0. Use the exact boot time to initialize wall_to_monotonic, or xtime if the read_boot_clock returned 0. Signed-off-by: Martin Schwidefsky Cc: Ingo Molnar Acked-by: John Stultz Cc: Daniel Walker LKML-Reference: <20090814134811.296703241@de.ibm.com> Signed-off-by: Thomas Gleixner --- include/linux/time.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/time.h b/include/linux/time.h index 53a3216f0d1b..f505988398e6 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -102,6 +102,7 @@ extern struct timespec wall_to_monotonic; extern seqlock_t xtime_lock; extern void read_persistent_clock(struct timespec *ts); +extern void read_boot_clock(struct timespec *ts); extern int update_persistent_clock(struct timespec now); extern int no_sync_cmos_clock __read_mostly; void timekeeping_init(void); -- cgit v1.2.3 From 0ccff1a49def92d6b838a6da166c89004b3a4d0c Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Mon, 17 Aug 2009 22:38:04 -0400 Subject: jbd2: bitfields should be unsigned This fixes sparse noise: error: dubious one-bit signed bitfield Signed-off-by: H Hartley Sweeten Signed-off-by: Andrew Morton Signed-off-by: "Theodore Ts'o" Cc: Jan Kara --- include/linux/jbd2.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index d97eb652d6ca..52695d3dfd0b 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -652,7 +652,7 @@ struct transaction_s * This transaction is being forced and some process is * waiting for it to finish. */ - int t_synchronous_commit:1; + unsigned int t_synchronous_commit:1; /* * For use by the filesystem to store fs-specific data -- cgit v1.2.3 From 23428e6b4649adfbdaa6a0c93fc6d652bf5f9d44 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Tue, 18 Aug 2009 20:13:03 -0700 Subject: mdio: mdio_if_info::mmds should not be __bitwise I misunderstood the meaning of __bitwise. In practice it makes sparse warn about every use of mmds which is certainly not what we want. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/linux/mdio.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mdio.h b/include/linux/mdio.h index cfdf1df2875e..c779b49a1fda 100644 --- a/include/linux/mdio.h +++ b/include/linux/mdio.h @@ -304,7 +304,7 @@ static inline __u16 mdio_phy_id_devad(int phy_id) */ struct mdio_if_info { int prtad; - u32 __bitwise mmds; + u32 mmds; unsigned mode_support; struct net_device *dev; -- cgit v1.2.3 From 16eea493da563b5a3356a77c6d8776dffc29d3b6 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Wed, 19 Aug 2009 19:32:24 +0400 Subject: ieee802154: add support for channel pages from IEEE 802.15.4-2006 IEEE 802.15.4-2006 adds new concept: channel pages, which can contain several channels. Add support for channel pages in the API and in the fakehard driver. Signed-off-by: Dmitry Eremin-Solenikov --- include/linux/nl802154.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl802154.h b/include/linux/nl802154.h index 9a1af5f871a3..b7d9435d5a9f 100644 --- a/include/linux/nl802154.h +++ b/include/linux/nl802154.h @@ -64,6 +64,8 @@ enum { IEEE802154_ATTR_COORD_REALIGN, IEEE802154_ATTR_SEC, + IEEE802154_ATTR_PAGE, + __IEEE802154_ATTR_MAX, }; -- cgit v1.2.3 From 929122cdd5d4c344e59f9b55f870a8fcf7aa0d27 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Fri, 14 Aug 2009 20:00:20 +0400 Subject: Drop ARPHRD_IEEE802154_PHY There are not maste devices in mac802154 anymore, so drop ARPHRD_IEEE802154_PHY definition. Signed-off-by: Dmitry Eremin-Solenikov --- include/linux/if_arp.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/if_arp.h b/include/linux/if_arp.h index b554300ef8bf..282eb37e2dec 100644 --- a/include/linux/if_arp.h +++ b/include/linux/if_arp.h @@ -87,7 +87,6 @@ #define ARPHRD_IEEE80211_PRISM 802 /* IEEE 802.11 + Prism2 header */ #define ARPHRD_IEEE80211_RADIOTAP 803 /* IEEE 802.11 + radiotap header */ #define ARPHRD_IEEE802154 804 -#define ARPHRD_IEEE802154_PHY 805 #define ARPHRD_PHONET 820 /* PhoNet media type */ #define ARPHRD_PHONET_PIPE 821 /* PhoNet pipe header */ -- cgit v1.2.3 From fc69f4a6af49ee69475dc4217924d9edf77760e0 Mon Sep 17 00:00:00 2001 From: Tai-hwa Liang Date: Sun, 10 May 2009 18:15:39 -0700 Subject: Input: add new driver for Sentelic Finger Sensing Pad This is the driver for Sentelic Finger Sensing Pad which can be found on MSI WIND Netbook. Signed-off-by: Tai-hwa Liang Signed-off-by: Dmitry Torokhov --- include/linux/libps2.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/libps2.h b/include/linux/libps2.h index b94534b7e266..fcf5fbe6a50c 100644 --- a/include/linux/libps2.h +++ b/include/linux/libps2.h @@ -44,6 +44,7 @@ struct ps2dev { void ps2_init(struct ps2dev *ps2dev, struct serio *serio); int ps2_sendbyte(struct ps2dev *ps2dev, unsigned char byte, int timeout); void ps2_drain(struct ps2dev *ps2dev, int maxbytes, int timeout); +int __ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command); int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command); int ps2_handle_ack(struct ps2dev *ps2dev, unsigned char data); int ps2_handle_response(struct ps2dev *ps2dev, unsigned char data); -- cgit v1.2.3 From 4516fc0454e7ffe2f369e80045b23c2b32155004 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 14 Aug 2009 12:57:54 -0400 Subject: sunrpc: add routine for comparing addresses lockd needs these sort of routines, as does the NFSv4 callback code. Move lockd's routines into common code and rename them so that they can be used by others. Signed-off-by: Jeff Layton Acked-by: Chuck Lever Signed-off-by: J. Bruce Fields --- include/linux/lockd/lockd.h | 43 ---------------------------------------- include/linux/sunrpc/clnt.h | 48 +++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 48 insertions(+), 43 deletions(-) (limited to 'include/linux') diff --git a/include/linux/lockd/lockd.h b/include/linux/lockd/lockd.h index c325b187966b..e7a251a988c0 100644 --- a/include/linux/lockd/lockd.h +++ b/include/linux/lockd/lockd.h @@ -338,49 +338,6 @@ static inline int nlm_privileged_requester(const struct svc_rqst *rqstp) } } -static inline int __nlm_cmp_addr4(const struct sockaddr *sap1, - const struct sockaddr *sap2) -{ - const struct sockaddr_in *sin1 = (const struct sockaddr_in *)sap1; - const struct sockaddr_in *sin2 = (const struct sockaddr_in *)sap2; - return sin1->sin_addr.s_addr == sin2->sin_addr.s_addr; -} - -#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) -static inline int __nlm_cmp_addr6(const struct sockaddr *sap1, - const struct sockaddr *sap2) -{ - const struct sockaddr_in6 *sin1 = (const struct sockaddr_in6 *)sap1; - const struct sockaddr_in6 *sin2 = (const struct sockaddr_in6 *)sap2; - return ipv6_addr_equal(&sin1->sin6_addr, &sin2->sin6_addr); -} -#else /* !(CONFIG_IPV6 || CONFIG_IPV6_MODULE) */ -static inline int __nlm_cmp_addr6(const struct sockaddr *sap1, - const struct sockaddr *sap2) -{ - return 0; -} -#endif /* !(CONFIG_IPV6 || CONFIG_IPV6_MODULE) */ - -/* - * Compare two host addresses - * - * Return TRUE if the addresses are the same; otherwise FALSE. - */ -static inline int nlm_cmp_addr(const struct sockaddr *sap1, - const struct sockaddr *sap2) -{ - if (sap1->sa_family == sap2->sa_family) { - switch (sap1->sa_family) { - case AF_INET: - return __nlm_cmp_addr4(sap1, sap2); - case AF_INET6: - return __nlm_cmp_addr6(sap1, sap2); - } - } - return 0; -} - /* * Compare two NLM locks. * When the second lock is of type F_UNLCK, this acts like a wildcard. diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h index ab3f6e90caa5..b17df361be82 100644 --- a/include/linux/sunrpc/clnt.h +++ b/include/linux/sunrpc/clnt.h @@ -22,6 +22,7 @@ #include #include #include +#include struct rpc_inode; @@ -188,5 +189,52 @@ static inline void rpc_set_port(struct sockaddr *sap, #define IPV6_SCOPE_DELIMITER '%' #define IPV6_SCOPE_ID_LEN sizeof("%nnnnnnnnnn") +static inline bool __rpc_cmp_addr4(const struct sockaddr *sap1, + const struct sockaddr *sap2) +{ + const struct sockaddr_in *sin1 = (const struct sockaddr_in *)sap1; + const struct sockaddr_in *sin2 = (const struct sockaddr_in *)sap2; + + return sin1->sin_addr.s_addr == sin2->sin_addr.s_addr; +} + +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) +static inline bool __rpc_cmp_addr6(const struct sockaddr *sap1, + const struct sockaddr *sap2) +{ + const struct sockaddr_in6 *sin1 = (const struct sockaddr_in6 *)sap1; + const struct sockaddr_in6 *sin2 = (const struct sockaddr_in6 *)sap2; + return ipv6_addr_equal(&sin1->sin6_addr, &sin2->sin6_addr); +} +#else /* !(CONFIG_IPV6 || CONFIG_IPV6_MODULE) */ +static inline bool __rpc_cmp_addr6(const struct sockaddr *sap1, + const struct sockaddr *sap2) +{ + return false; +} +#endif /* !(CONFIG_IPV6 || CONFIG_IPV6_MODULE) */ + +/** + * rpc_cmp_addr - compare the address portion of two sockaddrs. + * @sap1: first sockaddr + * @sap2: second sockaddr + * + * Just compares the family and address portion. Ignores port, scope, etc. + * Returns true if the addrs are equal, false if they aren't. + */ +static inline bool rpc_cmp_addr(const struct sockaddr *sap1, + const struct sockaddr *sap2) +{ + if (sap1->sa_family == sap2->sa_family) { + switch (sap1->sa_family) { + case AF_INET: + return __rpc_cmp_addr4(sap1, sap2); + case AF_INET6: + return __rpc_cmp_addr6(sap1, sap2); + } + } + return false; +} + #endif /* __KERNEL__ */ #endif /* _LINUX_SUNRPC_CLNT_H */ -- cgit v1.2.3 From be3ad6b0b675fd1d6b48362ca30bdee75fbef6b4 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 14 Aug 2009 12:57:55 -0400 Subject: sunrpc: add common routine for copying address portion of a sockaddr Signed-off-by: Jeff Layton Acked-by: Chuck Lever Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/clnt.h | 50 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h index b17df361be82..044f531aee70 100644 --- a/include/linux/sunrpc/clnt.h +++ b/include/linux/sunrpc/clnt.h @@ -198,6 +198,17 @@ static inline bool __rpc_cmp_addr4(const struct sockaddr *sap1, return sin1->sin_addr.s_addr == sin2->sin_addr.s_addr; } +static inline bool __rpc_copy_addr4(struct sockaddr *dst, + const struct sockaddr *src) +{ + const struct sockaddr_in *ssin = (struct sockaddr_in *) src; + struct sockaddr_in *dsin = (struct sockaddr_in *) dst; + + dsin->sin_family = ssin->sin_family; + dsin->sin_addr.s_addr = ssin->sin_addr.s_addr; + return true; +} + #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) static inline bool __rpc_cmp_addr6(const struct sockaddr *sap1, const struct sockaddr *sap2) @@ -206,12 +217,29 @@ static inline bool __rpc_cmp_addr6(const struct sockaddr *sap1, const struct sockaddr_in6 *sin2 = (const struct sockaddr_in6 *)sap2; return ipv6_addr_equal(&sin1->sin6_addr, &sin2->sin6_addr); } + +static inline bool __rpc_copy_addr6(struct sockaddr *dst, + const struct sockaddr *src) +{ + const struct sockaddr_in6 *ssin6 = (const struct sockaddr_in6 *) src; + struct sockaddr_in6 *dsin6 = (struct sockaddr_in6 *) dst; + + dsin6->sin6_family = ssin6->sin6_family; + ipv6_addr_copy(&dsin6->sin6_addr, &ssin6->sin6_addr); + return true; +} #else /* !(CONFIG_IPV6 || CONFIG_IPV6_MODULE) */ static inline bool __rpc_cmp_addr6(const struct sockaddr *sap1, const struct sockaddr *sap2) { return false; } + +static inline bool __rpc_copy_addr6(struct sockaddr *dst, + const struct sockaddr *src) +{ + return false; +} #endif /* !(CONFIG_IPV6 || CONFIG_IPV6_MODULE) */ /** @@ -236,5 +264,27 @@ static inline bool rpc_cmp_addr(const struct sockaddr *sap1, return false; } +/** + * rpc_copy_addr - copy the address portion of one sockaddr to another + * @dst: destination sockaddr + * @src: source sockaddr + * + * Just copies the address portion and family. Ignores port, scope, etc. + * Caller is responsible for making certain that dst is large enough to hold + * the address in src. Returns true if address family is supported. Returns + * false otherwise. + */ +static inline bool rpc_copy_addr(struct sockaddr *dst, + const struct sockaddr *src) +{ + switch (src->sa_family) { + case AF_INET: + return __rpc_copy_addr4(dst, src); + case AF_INET6: + return __rpc_copy_addr6(dst, src); + } + return false; +} + #endif /* __KERNEL__ */ #endif /* _LINUX_SUNRPC_CLNT_H */ -- cgit v1.2.3 From 363168b4ea8ec26aeb982ac6024a09f907ecd27e Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 14 Aug 2009 12:57:56 -0400 Subject: nfsd: make nfs4_client->cl_addr a struct sockaddr_storage It's currently a __be32, which isn't big enough to hold an IPv6 address. Signed-off-by: Jeff Layton Acked-by: Chuck Lever Signed-off-by: J. Bruce Fields --- include/linux/nfsd/state.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/nfsd/state.h b/include/linux/nfsd/state.h index 58bb19784e12..3510ddd4be49 100644 --- a/include/linux/nfsd/state.h +++ b/include/linux/nfsd/state.h @@ -200,7 +200,7 @@ struct nfs4_client { char cl_recdir[HEXDIR_LEN]; /* recovery dir */ nfs4_verifier cl_verifier; /* generated by client */ time_t cl_time; /* time of last lease renewal */ - __be32 cl_addr; /* client ipaddress */ + struct sockaddr_storage cl_addr; /* client ipaddress */ u32 cl_flavor; /* setclientid pseudoflavor */ char *cl_principal; /* setclientid principal name */ struct svc_cred cl_cred; /* setclientid principal */ -- cgit v1.2.3 From aa9a4ec7707a5391cde556f3fa1b0eb4bca3bcf6 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 14 Aug 2009 12:57:57 -0400 Subject: nfsd: convert nfs4_cb_conn struct to hold address in sockaddr_storage ...rather than as a separate address and port fields. This will be necessary for implementing callbacks over IPv6. Also, convert gen_callback to use the standard rpcuaddr2sockaddr routine rather than its own private one. Signed-off-by: Jeff Layton Acked-by: Chuck Lever Signed-off-by: J. Bruce Fields --- include/linux/nfsd/state.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nfsd/state.h b/include/linux/nfsd/state.h index 3510ddd4be49..fb0c404c7c5c 100644 --- a/include/linux/nfsd/state.h +++ b/include/linux/nfsd/state.h @@ -81,8 +81,8 @@ struct nfs4_delegation { /* client delegation callback info */ struct nfs4_cb_conn { /* SETCLIENTID info */ - u32 cb_addr; - unsigned short cb_port; + struct sockaddr_storage cb_addr; + size_t cb_addrlen; u32 cb_prog; u32 cb_minorversion; u32 cb_ident; /* minorversion 0 only */ -- cgit v1.2.3 From fbf4665f41b02e757ab9d9198df65e319388e728 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 14 Aug 2009 12:57:59 -0400 Subject: nfsd: populate sin6_scope_id on callback address with scopeid from rq_addr on SETCLIENTID call When a SETCLIENTID call comes in, one of the args given is the svc_rqst. This struct contains an rq_addr field which holds the address that sent the call. If this is an IPv6 address, then we can use the sin6_scope_id field in this address to populate the sin6_scope_id field in the callback address. AFAICT, the rq_addr.sin6_scope_id is non-zero if and only if the client mounted the server's link-local address. Signed-off-by: Jeff Layton Acked-by: Chuck Lever Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/clnt.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h index 044f531aee70..3d025588e56e 100644 --- a/include/linux/sunrpc/clnt.h +++ b/include/linux/sunrpc/clnt.h @@ -286,5 +286,20 @@ static inline bool rpc_copy_addr(struct sockaddr *dst, return false; } +/** + * rpc_get_scope_id - return scopeid for a given sockaddr + * @sa: sockaddr to get scopeid from + * + * Returns the value of the sin6_scope_id for AF_INET6 addrs, or 0 if + * not an AF_INET6 address. + */ +static inline u32 rpc_get_scope_id(const struct sockaddr *sa) +{ + if (sa->sa_family != AF_INET6) + return 0; + + return ((struct sockaddr_in6 *) sa)->sin6_scope_id; +} + #endif /* __KERNEL__ */ #endif /* _LINUX_SUNRPC_CLNT_H */ -- cgit v1.2.3 From da15cfdae03351c689736f8d142618592e3cebc3 Mon Sep 17 00:00:00 2001 From: john stultz Date: Wed, 19 Aug 2009 19:13:34 -0700 Subject: time: Introduce CLOCK_REALTIME_COARSE After talking with some application writers who want very fast, but not fine-grained timestamps, I decided to try to implement new clock_ids to clock_gettime(): CLOCK_REALTIME_COARSE and CLOCK_MONOTONIC_COARSE which returns the time at the last tick. This is very fast as we don't have to access any hardware (which can be very painful if you're using something like the acpi_pm clocksource), and we can even use the vdso clock_gettime() method to avoid the syscall. The only trade off is you only get low-res tick grained time resolution. This isn't a new idea, I know Ingo has a patch in the -rt tree that made the vsyscall gettimeofday() return coarse grained time when the vsyscall64 sysctrl was set to 2. However this affects all applications on a system. With this method, applications can choose the proper speed/granularity trade-off for themselves. Signed-off-by: John Stultz Cc: Andi Kleen Cc: nikolag@ca.ibm.com Cc: Darren Hart Cc: arjan@infradead.org Cc: jonathan@jonmasters.org LKML-Reference: <1250734414.6897.5.camel@localhost.localdomain> Signed-off-by: Thomas Gleixner --- include/linux/time.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/time.h b/include/linux/time.h index f505988398e6..256232f7e5e6 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -110,6 +110,8 @@ extern int timekeeping_suspended; unsigned long get_seconds(void); struct timespec current_kernel_time(void); +struct timespec __current_kernel_time(void); /* does not hold xtime_lock */ +struct timespec get_monotonic_coarse(void); #define CURRENT_TIME (current_kernel_time()) #define CURRENT_TIME_SEC ((struct timespec) { get_seconds(), 0 }) @@ -243,6 +245,8 @@ struct itimerval { #define CLOCK_PROCESS_CPUTIME_ID 2 #define CLOCK_THREAD_CPUTIME_ID 3 #define CLOCK_MONOTONIC_RAW 4 +#define CLOCK_REALTIME_COARSE 5 +#define CLOCK_MONOTONIC_COARSE 6 /* * The IDs of various hardware clocks: -- cgit v1.2.3 From 8b5a10fc6fd02289ea03480f93382b1a99006142 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 19 Aug 2009 08:40:48 +0100 Subject: x86: properly annotate alternatives.c Some of the NOPs tables aren't used on 64-bits, quite some code and data is needed post-init for module loading only, and a couple of functions aren't used outside that file (i.e. can be static, and don't need to be exported). The change to __INITDATA/__INITRODATA is needed to avoid an assembler warning. Signed-off-by: Jan Beulich LKML-Reference: <4A8BC8A00200007800010823@vpn.id2.novell.com> Acked-by: Sam Ravnborg Signed-off-by: H. Peter Anvin --- include/linux/init.h | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/init.h b/include/linux/init.h index 13b633ed695e..400adbb45414 100644 --- a/include/linux/init.h +++ b/include/linux/init.h @@ -103,8 +103,8 @@ #define __INIT .section ".init.text","ax" #define __FINIT .previous -#define __INITDATA .section ".init.data","aw" -#define __INITRODATA .section ".init.rodata","a" +#define __INITDATA .section ".init.data","aw",%progbits +#define __INITRODATA .section ".init.rodata","a",%progbits #define __FINITDATA .previous #define __DEVINIT .section ".devinit.text", "ax" @@ -305,9 +305,17 @@ void __init parse_early_options(char *cmdline); #ifdef CONFIG_MODULES #define __init_or_module #define __initdata_or_module +#define __initconst_or_module +#define __INIT_OR_MODULE .text +#define __INITDATA_OR_MODULE .data +#define __INITRODATA_OR_MODULE .section ".rodata","a",%progbits #else #define __init_or_module __init #define __initdata_or_module __initdata +#define __initconst_or_module __initconst +#define __INIT_OR_MODULE __INIT +#define __INITDATA_OR_MODULE __INITDATA +#define __INITRODATA_OR_MODULE __INITRODATA #endif /*CONFIG_MODULES*/ /* Functions marked as __devexit may be discarded at kernel link time, depending -- cgit v1.2.3 From 5e928f77a09a07f9dd595bb8a489965d69a83458 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 18 Aug 2009 23:38:32 +0200 Subject: PM: Introduce core framework for run-time PM of I/O devices (rev. 17) Introduce a core framework for run-time power management of I/O devices. Add device run-time PM fields to 'struct dev_pm_info' and device run-time PM callbacks to 'struct dev_pm_ops'. Introduce a run-time PM workqueue and define some device run-time PM helper functions at the core level. Document all these things. Special thanks to Alan Stern for his help with the design and multiple detailed reviews of the pereceding versions of this patch and to Magnus Damm for testing feedback. Signed-off-by: Rafael J. Wysocki Acked-by: Magnus Damm --- include/linux/pm.h | 101 +++++++++++++++++++++++++++++++++++++-- include/linux/pm_runtime.h | 114 +++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 212 insertions(+), 3 deletions(-) create mode 100644 include/linux/pm_runtime.h (limited to 'include/linux') diff --git a/include/linux/pm.h b/include/linux/pm.h index b3f74764a586..2b6e20df0e52 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -22,6 +22,10 @@ #define _LINUX_PM_H #include +#include +#include +#include +#include /* * Callbacks for platform drivers to implement. @@ -165,6 +169,28 @@ typedef struct pm_message { * It is allowed to unregister devices while the above callbacks are being * executed. However, it is not allowed to unregister a device from within any * of its own callbacks. + * + * There also are the following callbacks related to run-time power management + * of devices: + * + * @runtime_suspend: Prepare the device for a condition in which it won't be + * able to communicate with the CPU(s) and RAM due to power management. + * This need not mean that the device should be put into a low power state. + * For example, if the device is behind a link which is about to be turned + * off, the device may remain at full power. If the device does go to low + * power and if device_may_wakeup(dev) is true, remote wake-up (i.e., a + * hardware mechanism allowing the device to request a change of its power + * state, such as PCI PME) should be enabled for it. + * + * @runtime_resume: Put the device into the fully active state in response to a + * wake-up event generated by hardware or at the request of software. If + * necessary, put the device into the full power state and restore its + * registers, so that it is fully operational. + * + * @runtime_idle: Device appears to be inactive and it might be put into a low + * power state if all of the necessary conditions are satisfied. Check + * these conditions and handle the device as appropriate, possibly queueing + * a suspend request for it. The return value is ignored by the PM core. */ struct dev_pm_ops { @@ -182,6 +208,9 @@ struct dev_pm_ops { int (*thaw_noirq)(struct device *dev); int (*poweroff_noirq)(struct device *dev); int (*restore_noirq)(struct device *dev); + int (*runtime_suspend)(struct device *dev); + int (*runtime_resume)(struct device *dev); + int (*runtime_idle)(struct device *dev); }; /** @@ -315,14 +344,80 @@ enum dpm_state { DPM_OFF_IRQ, }; +/** + * Device run-time power management status. + * + * These status labels are used internally by the PM core to indicate the + * current status of a device with respect to the PM core operations. They do + * not reflect the actual power state of the device or its status as seen by the + * driver. + * + * RPM_ACTIVE Device is fully operational. Indicates that the device + * bus type's ->runtime_resume() callback has completed + * successfully. + * + * RPM_SUSPENDED Device bus type's ->runtime_suspend() callback has + * completed successfully. The device is regarded as + * suspended. + * + * RPM_RESUMING Device bus type's ->runtime_resume() callback is being + * executed. + * + * RPM_SUSPENDING Device bus type's ->runtime_suspend() callback is being + * executed. + */ + +enum rpm_status { + RPM_ACTIVE = 0, + RPM_RESUMING, + RPM_SUSPENDED, + RPM_SUSPENDING, +}; + +/** + * Device run-time power management request types. + * + * RPM_REQ_NONE Do nothing. + * + * RPM_REQ_IDLE Run the device bus type's ->runtime_idle() callback + * + * RPM_REQ_SUSPEND Run the device bus type's ->runtime_suspend() callback + * + * RPM_REQ_RESUME Run the device bus type's ->runtime_resume() callback + */ + +enum rpm_request { + RPM_REQ_NONE = 0, + RPM_REQ_IDLE, + RPM_REQ_SUSPEND, + RPM_REQ_RESUME, +}; + struct dev_pm_info { pm_message_t power_state; - unsigned can_wakeup:1; - unsigned should_wakeup:1; + unsigned int can_wakeup:1; + unsigned int should_wakeup:1; enum dpm_state status; /* Owned by the PM core */ -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_PM_SLEEP struct list_head entry; #endif +#ifdef CONFIG_PM_RUNTIME + struct timer_list suspend_timer; + unsigned long timer_expires; + struct work_struct work; + wait_queue_head_t wait_queue; + spinlock_t lock; + atomic_t usage_count; + atomic_t child_count; + unsigned int disable_depth:3; + unsigned int ignore_children:1; + unsigned int idle_notification:1; + unsigned int request_pending:1; + unsigned int deferred_resume:1; + enum rpm_request request; + enum rpm_status runtime_status; + int runtime_error; +#endif }; /* diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h new file mode 100644 index 000000000000..44087044910f --- /dev/null +++ b/include/linux/pm_runtime.h @@ -0,0 +1,114 @@ +/* + * pm_runtime.h - Device run-time power management helper functions. + * + * Copyright (C) 2009 Rafael J. Wysocki + * + * This file is released under the GPLv2. + */ + +#ifndef _LINUX_PM_RUNTIME_H +#define _LINUX_PM_RUNTIME_H + +#include +#include + +#ifdef CONFIG_PM_RUNTIME + +extern struct workqueue_struct *pm_wq; + +extern int pm_runtime_idle(struct device *dev); +extern int pm_runtime_suspend(struct device *dev); +extern int pm_runtime_resume(struct device *dev); +extern int pm_request_idle(struct device *dev); +extern int pm_schedule_suspend(struct device *dev, unsigned int delay); +extern int pm_request_resume(struct device *dev); +extern int __pm_runtime_get(struct device *dev, bool sync); +extern int __pm_runtime_put(struct device *dev, bool sync); +extern int __pm_runtime_set_status(struct device *dev, unsigned int status); +extern int pm_runtime_barrier(struct device *dev); +extern void pm_runtime_enable(struct device *dev); +extern void __pm_runtime_disable(struct device *dev, bool check_resume); + +static inline bool pm_children_suspended(struct device *dev) +{ + return dev->power.ignore_children + || !atomic_read(&dev->power.child_count); +} + +static inline void pm_suspend_ignore_children(struct device *dev, bool enable) +{ + dev->power.ignore_children = enable; +} + +static inline void pm_runtime_get_noresume(struct device *dev) +{ + atomic_inc(&dev->power.usage_count); +} + +static inline void pm_runtime_put_noidle(struct device *dev) +{ + atomic_add_unless(&dev->power.usage_count, -1, 0); +} + +#else /* !CONFIG_PM_RUNTIME */ + +static inline int pm_runtime_idle(struct device *dev) { return -ENOSYS; } +static inline int pm_runtime_suspend(struct device *dev) { return -ENOSYS; } +static inline int pm_runtime_resume(struct device *dev) { return 0; } +static inline int pm_request_idle(struct device *dev) { return -ENOSYS; } +static inline int pm_schedule_suspend(struct device *dev, unsigned int delay) +{ + return -ENOSYS; +} +static inline int pm_request_resume(struct device *dev) { return 0; } +static inline int __pm_runtime_get(struct device *dev, bool sync) { return 1; } +static inline int __pm_runtime_put(struct device *dev, bool sync) { return 0; } +static inline int __pm_runtime_set_status(struct device *dev, + unsigned int status) { return 0; } +static inline int pm_runtime_barrier(struct device *dev) { return 0; } +static inline void pm_runtime_enable(struct device *dev) {} +static inline void __pm_runtime_disable(struct device *dev, bool c) {} + +static inline bool pm_children_suspended(struct device *dev) { return false; } +static inline void pm_suspend_ignore_children(struct device *dev, bool en) {} +static inline void pm_runtime_get_noresume(struct device *dev) {} +static inline void pm_runtime_put_noidle(struct device *dev) {} + +#endif /* !CONFIG_PM_RUNTIME */ + +static inline int pm_runtime_get(struct device *dev) +{ + return __pm_runtime_get(dev, false); +} + +static inline int pm_runtime_get_sync(struct device *dev) +{ + return __pm_runtime_get(dev, true); +} + +static inline int pm_runtime_put(struct device *dev) +{ + return __pm_runtime_put(dev, false); +} + +static inline int pm_runtime_put_sync(struct device *dev) +{ + return __pm_runtime_put(dev, true); +} + +static inline int pm_runtime_set_active(struct device *dev) +{ + return __pm_runtime_set_status(dev, RPM_ACTIVE); +} + +static inline void pm_runtime_set_suspended(struct device *dev) +{ + __pm_runtime_set_status(dev, RPM_SUSPENDED); +} + +static inline void pm_runtime_disable(struct device *dev) +{ + __pm_runtime_disable(dev, true); +} + +#endif -- cgit v1.2.3 From 163f52b6cf3a639df6a72c7937e0eb88b20f1ef3 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Sat, 1 Aug 2009 00:39:36 +0000 Subject: [SCSI] ses: fix hotplug with multiple devices and expanders In a situation either with expanders or with multiple enclosure devices, hot add doesn't always work. This is because we try to find a single enclosure device attached to the host. Fix this by looping over all enclosure devices attached to the host and also by making the find loop recognise that the enclosure devices may be expander remote (i.e. not parented by the host). Signed-off-by: James Bottomley Signed-off-by: James Bottomley --- include/linux/enclosure.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/enclosure.h b/include/linux/enclosure.h index 4332442b1b57..d77811e9ed84 100644 --- a/include/linux/enclosure.h +++ b/include/linux/enclosure.h @@ -123,7 +123,8 @@ enclosure_component_register(struct enclosure_device *, unsigned int, int enclosure_add_device(struct enclosure_device *enclosure, int component, struct device *dev); int enclosure_remove_device(struct enclosure_device *enclosure, int component); -struct enclosure_device *enclosure_find(struct device *dev); +struct enclosure_device *enclosure_find(struct device *dev, + struct enclosure_device *start); int enclosure_for_each_device(int (*fn)(struct enclosure_device *, void *), void *data); -- cgit v1.2.3 From 43d8eb9cfd0aea93be32181c64e18191b69c211c Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Sat, 1 Aug 2009 00:41:22 +0000 Subject: [SCSI] ses: add support for enclosure component hot removal Right at the moment, hot removal of a device within an enclosure does nothing (because the intf_remove only copes with enclosure removal not with component removal). Fix this by adding a function to remove the component. Also needed to fix the prototype of enclosure_remove_device, since we know the device we've removed but not the internal component number Signed-off-by: James Bottomley Signed-off-by: James Bottomley --- include/linux/enclosure.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/enclosure.h b/include/linux/enclosure.h index d77811e9ed84..90d1c2184112 100644 --- a/include/linux/enclosure.h +++ b/include/linux/enclosure.h @@ -122,7 +122,7 @@ enclosure_component_register(struct enclosure_device *, unsigned int, enum enclosure_component_type, const char *); int enclosure_add_device(struct enclosure_device *enclosure, int component, struct device *dev); -int enclosure_remove_device(struct enclosure_device *enclosure, int component); +int enclosure_remove_device(struct enclosure_device *, struct device *); struct enclosure_device *enclosure_find(struct device *dev, struct enclosure_device *start); int enclosure_for_each_device(int (*fn)(struct enclosure_device *, void *), -- cgit v1.2.3 From 70041088e3b976627ba9a183b812f39ef8a9ba0e Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Fri, 21 Aug 2009 12:28:31 +0000 Subject: RDS: Add TCP transport to RDS This code allows RDS to be tunneled over a TCP connection. RDMA operations are disabled when using TCP transport, but this frees RDS from the IB/RDMA stack dependency, and allows it to be used with standard Ethernet adapters, or in a VM. Signed-off-by: Andy Grover Signed-off-by: David S. Miller --- include/linux/rds.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/linux') diff --git a/include/linux/rds.h b/include/linux/rds.h index d91dc91f5443..89d46e1afbb1 100644 --- a/include/linux/rds.h +++ b/include/linux/rds.h @@ -147,6 +147,18 @@ struct rds_info_socket { u_int64_t inum; } __attribute__((packed)); +struct rds_info_tcp_socket { + __be32 local_addr; + __be16 local_port; + __be32 peer_addr; + __be16 peer_port; + u_int64_t hdr_rem; + u_int64_t data_rem; + u_int32_t last_sent_nxt; + u_int32_t last_expected_una; + u_int32_t last_seen_una; +} __attribute__((packed)); + #define RDS_IB_GID_LEN 16 struct rds_info_rdma_connection { __be32 src_addr; -- cgit v1.2.3 From 05ecd5a1f76c183cca381705b3adb7d77c9a0439 Mon Sep 17 00:00:00 2001 From: Pawel Moll Date: Mon, 24 Aug 2009 19:52:38 +0900 Subject: sh: Simplify "multi-evt" interrupt handling. This patch changes the way in which "multi-evt" interrups are handled. The intc_evt2irq_table and related intc_evt2irq() have been removed and the "redirecting" handler is installed for the coupled interrupts. Thanks to that the do_IRQ() function don't have to use another level of indirection for all the interrupts... Signed-off-by: Pawel Moll Signed-off-by: Stuart Menefy Signed-off-by: Paul Mundt --- include/linux/sh_intc.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sh_intc.h b/include/linux/sh_intc.h index eb1423a0078d..68e212ff9dde 100644 --- a/include/linux/sh_intc.h +++ b/include/linux/sh_intc.h @@ -85,7 +85,6 @@ struct intc_desc symbol __initdata = { \ } #endif -unsigned int intc_evt2irq(unsigned int vector); void __init register_intc_controller(struct intc_desc *desc); int intc_set_priority(unsigned int irq, unsigned int prio); -- cgit v1.2.3 From 35aad0ffdf548617940ca1e78be1f2e0bafc4496 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Mon, 24 Aug 2009 14:56:30 +0200 Subject: netfilter: xtables: mark initial tables constant The inputted table is never modified, so should be considered const. Signed-off-by: Jan Engelhardt Signed-off-by: Patrick McHardy --- include/linux/netfilter/x_tables.h | 2 +- include/linux/netfilter_arp/arp_tables.h | 2 +- include/linux/netfilter_bridge/ebtables.h | 2 +- include/linux/netfilter_ipv4/ip_tables.h | 2 +- include/linux/netfilter_ipv6/ip6_tables.h | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h index 4fa6e4c263e0..812cb153cabb 100644 --- a/include/linux/netfilter/x_tables.h +++ b/include/linux/netfilter/x_tables.h @@ -407,7 +407,7 @@ extern int xt_check_target(struct xt_tgchk_param *, unsigned int size, u_int8_t proto, bool inv_proto); extern struct xt_table *xt_register_table(struct net *net, - struct xt_table *table, + const struct xt_table *table, struct xt_table_info *bootstrap, struct xt_table_info *newinfo); extern void *xt_unregister_table(struct xt_table *table); diff --git a/include/linux/netfilter_arp/arp_tables.h b/include/linux/netfilter_arp/arp_tables.h index 590ac3d6d5d6..6fe3e6aa10db 100644 --- a/include/linux/netfilter_arp/arp_tables.h +++ b/include/linux/netfilter_arp/arp_tables.h @@ -265,7 +265,7 @@ struct arpt_error } extern struct xt_table *arpt_register_table(struct net *net, - struct xt_table *table, + const struct xt_table *table, const struct arpt_replace *repl); extern void arpt_unregister_table(struct xt_table *table); extern unsigned int arpt_do_table(struct sk_buff *skb, diff --git a/include/linux/netfilter_bridge/ebtables.h b/include/linux/netfilter_bridge/ebtables.h index e40ddb94b1af..ea281e6a2048 100644 --- a/include/linux/netfilter_bridge/ebtables.h +++ b/include/linux/netfilter_bridge/ebtables.h @@ -301,7 +301,7 @@ struct ebt_table #define EBT_ALIGN(s) (((s) + (__alignof__(struct ebt_replace)-1)) & \ ~(__alignof__(struct ebt_replace)-1)) extern struct ebt_table *ebt_register_table(struct net *net, - struct ebt_table *table); + const struct ebt_table *table); extern void ebt_unregister_table(struct ebt_table *table); extern unsigned int ebt_do_table(unsigned int hook, struct sk_buff *skb, const struct net_device *in, const struct net_device *out, diff --git a/include/linux/netfilter_ipv4/ip_tables.h b/include/linux/netfilter_ipv4/ip_tables.h index 092bd50581a9..61fafc868a7b 100644 --- a/include/linux/netfilter_ipv4/ip_tables.h +++ b/include/linux/netfilter_ipv4/ip_tables.h @@ -245,7 +245,7 @@ ipt_get_target(struct ipt_entry *e) extern void ipt_init(void) __init; extern struct xt_table *ipt_register_table(struct net *net, - struct xt_table *table, + const struct xt_table *table, const struct ipt_replace *repl); extern void ipt_unregister_table(struct xt_table *table); diff --git a/include/linux/netfilter_ipv6/ip6_tables.h b/include/linux/netfilter_ipv6/ip6_tables.h index 1089e33cf633..a64e1451ac38 100644 --- a/include/linux/netfilter_ipv6/ip6_tables.h +++ b/include/linux/netfilter_ipv6/ip6_tables.h @@ -306,7 +306,7 @@ ip6t_get_target(struct ip6t_entry *e) extern void ip6t_init(void) __init; extern struct xt_table *ip6t_register_table(struct net *net, - struct xt_table *table, + const struct xt_table *table, const struct ip6t_replace *repl); extern void ip6t_unregister_table(struct xt_table *table); extern unsigned int ip6t_do_table(struct sk_buff *skb, -- cgit v1.2.3 From b6ed2e03df1e2c6ee41cf0e2e2699f2410671916 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Tue, 25 Aug 2009 13:44:04 +0100 Subject: GFS2: Add explanation of extended attr on-disk format Some useful info regarding the on-disk representation of GFS2 extended attributes. Signed-off-by: Steven Whitehouse --- include/linux/gfs2_ondisk.h | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'include/linux') diff --git a/include/linux/gfs2_ondisk.h b/include/linux/gfs2_ondisk.h index c56b4bce56d0..b80c88dedbbb 100644 --- a/include/linux/gfs2_ondisk.h +++ b/include/linux/gfs2_ondisk.h @@ -333,6 +333,28 @@ struct gfs2_leaf { /* * Extended attribute header format + * + * This works in a similar way to dirents. There is a fixed size header + * followed by a variable length section made up of the name and the + * associated data. In the case of a "stuffed" entry, the value is + * inline directly after the name, the ea_num_ptrs entry will be + * zero in that case. For non-"stuffed" entries, there will be + * a set of pointers (aligned to 8 byte boundary) to the block(s) + * containing the value. + * + * The blocks containing the values and the blocks containing the + * extended attribute headers themselves all start with the common + * metadata header. Each inode, if it has extended attributes, will + * have either a single block containing the extended attribute headers + * or a single indirect block pointing to blocks containing the + * extended attribure headers. + * + * The maximim size of the data part of an extended attribute is 64k + * so the number of blocks required depends upon block size. Since the + * block size also determines the number of pointers in an indirect + * block, its a fairly complicated calculation to work out the maximum + * number of blocks that an inode may have relating to extended attributes. + * */ #define GFS2_EA_MAX_NAME_LEN 255 -- cgit v1.2.3 From 3a6c2b419b7768703cfb2cabdb894517c5065e33 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 25 Aug 2009 16:07:40 +0200 Subject: netlink: constify nlmsghdr arguments Consitfy nlmsghdr arguments to a couple of functions as preparation for the next patch, which will constify the netlink message data in all nfnetlink users. Signed-off-by: Patrick McHardy --- include/linux/netlink.h | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netlink.h b/include/linux/netlink.h index 5ba398e90304..0fbecbbe8e9e 100644 --- a/include/linux/netlink.h +++ b/include/linux/netlink.h @@ -217,12 +217,13 @@ int netlink_sendskb(struct sock *sk, struct sk_buff *skb); struct netlink_callback { - struct sk_buff *skb; - struct nlmsghdr *nlh; - int (*dump)(struct sk_buff * skb, struct netlink_callback *cb); - int (*done)(struct netlink_callback *cb); - int family; - long args[6]; + struct sk_buff *skb; + const struct nlmsghdr *nlh; + int (*dump)(struct sk_buff * skb, + struct netlink_callback *cb); + int (*done)(struct netlink_callback *cb); + int family; + long args[6]; }; struct netlink_notify @@ -258,7 +259,7 @@ __nlmsg_put(struct sk_buff *skb, u32 pid, u32 seq, int type, int len, int flags) NLMSG_NEW(skb, pid, seq, type, len, 0) extern int netlink_dump_start(struct sock *ssk, struct sk_buff *skb, - struct nlmsghdr *nlh, + const struct nlmsghdr *nlh, int (*dump)(struct sk_buff *skb, struct netlink_callback*), int (*done)(struct netlink_callback*)); -- cgit v1.2.3 From 3993832464dd4e14a4c926583a11f0fa92c1f0f0 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 25 Aug 2009 16:07:58 +0200 Subject: netfilter: nfnetlink: constify message attributes and headers Signed-off-by: Patrick McHardy --- include/linux/netfilter/nfnetlink.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/netfilter/nfnetlink.h b/include/linux/netfilter/nfnetlink.h index bff4d5741d98..9f00da287f2c 100644 --- a/include/linux/netfilter/nfnetlink.h +++ b/include/linux/netfilter/nfnetlink.h @@ -58,7 +58,8 @@ struct nfgenmsg { struct nfnl_callback { int (*call)(struct sock *nl, struct sk_buff *skb, - struct nlmsghdr *nlh, struct nlattr *cda[]); + const struct nlmsghdr *nlh, + const struct nlattr * const cda[]); const struct nla_policy *policy; /* netlink attribute policy */ const u_int16_t attr_count; /* number of nlattr's */ }; -- cgit v1.2.3 From 0396c215f301e92677d1e9a064b405e31501dc1d Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Tue, 25 Aug 2009 16:41:06 +0100 Subject: uwb: avoid radio controller reset loops If a radio controller reset attempt occurs while a probe() or remove() is in progress it fails and is retried endlessly, potentially preventing the probe() or remove() from completing. If a reset fails, sleep for a bit before retrying the reset. This allows the probe()/remove() to complete. Signed-off-by: David Vrabel --- include/linux/uwb.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/uwb.h b/include/linux/uwb.h index c02128991ff7..7fc9746f22cd 100644 --- a/include/linux/uwb.h +++ b/include/linux/uwb.h @@ -597,7 +597,7 @@ void uwb_rc_neh_grok(struct uwb_rc *, void *, size_t); void uwb_rc_neh_error(struct uwb_rc *, int); void uwb_rc_reset_all(struct uwb_rc *rc); void uwb_rc_pre_reset(struct uwb_rc *rc); -void uwb_rc_post_reset(struct uwb_rc *rc); +int uwb_rc_post_reset(struct uwb_rc *rc); /** * uwb_rsv_is_owner - is the owner of this reservation the RC? -- cgit v1.2.3 From 9e36fda0b359d2a6ae039c3d7e71a04502a77898 Mon Sep 17 00:00:00 2001 From: Venkatesh Pallipadi Date: Fri, 10 Jul 2009 09:57:35 -0700 Subject: x86, pat: Add PAT reserve free to io_mapping* APIs io_mapping_* interfaces were added, mainly for graphics drivers. Make this interface go through the PAT reserve/free, instead of hardcoding WC mapping. This makes sure that there are no aliases due to unconditional WC setting. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Suresh Siddha Signed-off-by: H. Peter Anvin --- include/linux/io-mapping.h | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/io-mapping.h b/include/linux/io-mapping.h index 0adb0f91568c..97eb928b4924 100644 --- a/include/linux/io-mapping.h +++ b/include/linux/io-mapping.h @@ -49,23 +49,30 @@ static inline struct io_mapping * io_mapping_create_wc(resource_size_t base, unsigned long size) { struct io_mapping *iomap; - - if (!is_io_mapping_possible(base, size)) - return NULL; + pgprot_t prot; iomap = kmalloc(sizeof(*iomap), GFP_KERNEL); if (!iomap) - return NULL; + goto out_err; + + if (iomap_create_wc(base, size, &prot)) + goto out_free; iomap->base = base; iomap->size = size; - iomap->prot = pgprot_writecombine(__pgprot(__PAGE_KERNEL)); + iomap->prot = prot; return iomap; + +out_free: + kfree(iomap); +out_err: + return NULL; } static inline void io_mapping_free(struct io_mapping *mapping) { + iomap_free(mapping->base, mapping->size); kfree(mapping); } -- cgit v1.2.3 From 46cf98cdaef5471926010b5bddf84c44ec177fdd Mon Sep 17 00:00:00 2001 From: Venkatesh Pallipadi Date: Fri, 10 Jul 2009 09:57:37 -0700 Subject: x86, pat: Generalize the use of page flag PG_uncached Only IA64 was using PG_uncached as of now. We now intend to use this bit in x86 as well, to keep track of memory type of those addresses that have page struct for them. So, generalize the use of that bit across ia64 and x86. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Suresh Siddha Signed-off-by: H. Peter Anvin --- include/linux/page-flags.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h index e2e5ce543595..2b87acfc5f87 100644 --- a/include/linux/page-flags.h +++ b/include/linux/page-flags.h @@ -99,7 +99,7 @@ enum pageflags { #ifdef CONFIG_HAVE_MLOCKED_PAGE_BIT PG_mlocked, /* Page is vma mlocked */ #endif -#ifdef CONFIG_IA64_UNCACHED_ALLOCATOR +#ifdef CONFIG_ARCH_USES_PG_UNCACHED PG_uncached, /* Page has been mapped as uncached */ #endif __NR_PAGEFLAGS, @@ -257,7 +257,7 @@ PAGEFLAG_FALSE(Mlocked) SETPAGEFLAG_NOOP(Mlocked) TESTCLEARFLAG_FALSE(Mlocked) #endif -#ifdef CONFIG_IA64_UNCACHED_ALLOCATOR +#ifdef CONFIG_ARCH_USES_PG_UNCACHED PAGEFLAG(Uncached, uncached) #else PAGEFLAG_FALSE(Uncached) -- cgit v1.2.3 From f726f30e32305a34a203ff975e60885aa7556c6a Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 4 Aug 2009 19:08:24 +0000 Subject: dma: Add set_dma_mask hook to struct dma_map_ops POWERPC needs this hook. SPARC could use it too. Signed-off-by: FUJITA Tomonori Acked-by: Becky Bruce Signed-off-by: Benjamin Herrenschmidt --- include/linux/dma-mapping.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h index c0f6c3cd788c..91b761846061 100644 --- a/include/linux/dma-mapping.h +++ b/include/linux/dma-mapping.h @@ -58,6 +58,7 @@ struct dma_map_ops { enum dma_data_direction dir); int (*mapping_error)(struct device *dev, dma_addr_t dma_addr); int (*dma_supported)(struct device *dev, u64 mask); + int (*set_dma_mask)(struct device *dev, u64 mask); int is_phys; }; -- cgit v1.2.3 From 77a53fd21870c726b670c0d8179294ac1ea33468 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 25 Aug 2009 19:24:13 -0700 Subject: Input: matrix-keypad - add function to build device keymap Signed-off-by: Dmitry Torokhov --- include/linux/input/matrix_keypad.h | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) (limited to 'include/linux') diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h index 15d5903af2dd..b3cd42d50e16 100644 --- a/include/linux/input/matrix_keypad.h +++ b/include/linux/input/matrix_keypad.h @@ -63,4 +63,36 @@ struct matrix_keypad_platform_data { bool wakeup; }; +/** + * matrix_keypad_build_keymap - convert platform keymap into matrix keymap + * @keymap_data: keymap supplied by the platform code + * @row_shift: number of bits to shift row value by to advance to the next + * line in the keymap + * @keymap: expanded version of keymap that is suitable for use by + * matrix keyboad driver + * @keybit: pointer to bitmap of keys supported by input device + * + * This function converts platform keymap (encoded with KEY() macro) into + * an array of keycodes that is suitable for using in a standard matrix + * keyboard driver that uses row and col as indices. + */ +static inline void +matrix_keypad_build_keymap(const struct matrix_keymap_data *keymap_data, + unsigned int row_shift, + unsigned short *keymap, unsigned long *keybit) +{ + int i; + + for (i = 0; i < keymap_data->keymap_size; i++) { + unsigned int key = keymap_data->keymap[i]; + unsigned int row = KEY_ROW(key); + unsigned int col = KEY_COL(key); + unsigned short code = KEY_VAL(key); + + keymap[MATRIX_SCAN_CODE(row, col, row_shift)] = code; + __set_bit(code, keybit); + } + __clear_bit(KEY_RESERVED, keybit); +} + #endif /* _MATRIX_KEYPAD_H */ -- cgit v1.2.3 From 9d8340687c524ce61e3c9c76758c4c81303acfc0 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 25 Aug 2009 19:24:14 -0700 Subject: Input: add twl4030_keypad driver Add a driver for the keypad controller on TWL4030 family chips. These support up to an 8x8 key matrix. The TWL4030 multifunction chips are mostly used on OMAP3 (or OMAP 2430) based boards. [dtor@mail.ru: switch to matrix-keypad framework, fix changing keymap from userspace] Reviewed-by: Trilok Soni Signed-off-by: David Brownell Signed-off-by: Dmitry Torokhov --- include/linux/i2c/twl4030.h | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h index 0dc80ef24975..3fd21d7cb6bf 100644 --- a/include/linux/i2c/twl4030.h +++ b/include/linux/i2c/twl4030.h @@ -25,6 +25,9 @@ #ifndef __TWL4030_H_ #define __TWL4030_H_ +#include +#include + /* * Using the twl4030 core we address registers using a pair * { module id, relative register offset } @@ -302,13 +305,17 @@ struct twl4030_madc_platform_data { int irq_line; }; +/* Boards have uniqe mappings of {col, row} --> keycode. + * Column and row are 4 bits, but range only from 0..7. + * a PERSISTENT_KEY is "always on" and never reported. + */ +#define PERSISTENT_KEY(c, r) KEY((c), (r), KEY_RESERVED) + struct twl4030_keypad_data { - int rows; - int cols; - int *keymap; - int irq; - unsigned int keymapsize; - unsigned int rep:1; + const struct matrix_keymap_data *keymap_data; + unsigned rows; + unsigned cols; + bool rep; }; enum twl4030_usb_mode { -- cgit v1.2.3 From 468de9e54a900559b55aa939a4daeaea1915e572 Mon Sep 17 00:00:00 2001 From: Andy Adamson Date: Thu, 27 Aug 2009 12:07:40 -0400 Subject: nfsd41: expand solo sequence check Compounds consisting of only a sequence operation don't need any additional caching beyond the sequence information we store in the slot entry. Fix nfsd4_is_solo_sequence to identify this case correctly. The additional check for a failed sequence in nfsd4_store_cache_entry() is redundant, since the nfsd4_is_solo_sequence call lower down catches this case. The final ce_cachethis set in nfsd4_sequence is also redundant. Signed-off-by: Andy Adamson Signed-off-by: J. Bruce Fields --- include/linux/nfsd/xdr4.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/nfsd/xdr4.h b/include/linux/nfsd/xdr4.h index 5e4beb0deb80..3f716607c86d 100644 --- a/include/linux/nfsd/xdr4.h +++ b/include/linux/nfsd/xdr4.h @@ -467,7 +467,7 @@ struct nfsd4_compoundres { static inline bool nfsd4_is_solo_sequence(struct nfsd4_compoundres *resp) { struct nfsd4_compoundargs *args = resp->rqstp->rq_argp; - return args->opcnt == 1; + return resp->opcnt == 1 && args->ops[0].opnum == OP_SEQUENCE; } static inline bool nfsd4_not_cached(struct nfsd4_compoundres *resp) -- cgit v1.2.3 From 7285dd7fd375763bfb8ab1ac9cf3f1206f503c16 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 28 Aug 2009 20:25:24 +0200 Subject: clocksource: Resolve cpu hotplug dead lock with TSC unstable Martin Schwidefsky analyzed it: To register a clocksource the clocksource_mutex is acquired and if necessary timekeeping_notify is called to install the clocksource as the timekeeper clock. timekeeping_notify uses stop_machine which needs to take cpu_add_remove_lock mutex. Starting a new cpu is done with the cpu_add_remove_lock mutex held. native_cpu_up checks the tsc of the new cpu and if the tsc is no good clocksource_change_rating is called. Which needs the clocksource_mutex and the deadlock is complete. The solution is to replace the TSC via the clocksource watchdog mechanism. Mark the TSC as unstable and schedule the watchdog work so it gets removed in the watchdog thread context. Signed-off-by: Thomas Gleixner LKML-Reference: Cc: Martin Schwidefsky Cc: John Stultz --- include/linux/clocksource.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index 9ea40ff26f0e..83d2fbd81b93 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -277,6 +277,7 @@ extern struct clocksource* clocksource_get_next(void); extern void clocksource_change_rating(struct clocksource *cs, int rating); extern void clocksource_resume(void); extern struct clocksource * __init __weak clocksource_default_clock(void); +extern void clocksource_mark_unstable(struct clocksource *cs); #ifdef CONFIG_GENERIC_TIME_VSYSCALL extern void update_vsyscall(struct timespec *ts, struct clocksource *c); -- cgit v1.2.3 From 9e03fdfd05e733e1136d431973625b174029c5e6 Mon Sep 17 00:00:00 2001 From: Javier Cardona Date: Thu, 20 Aug 2009 09:21:45 -0700 Subject: mac80211: Update mesh config IE to 11s draft 3.02 The mesh config information element has changed significantly since draft 1.08 This patch brings it up to date. Thanks to Sam Leffler and Rui Paulo for identifying this. Signed-off-by: Javier Cardona Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 21556a2d9e7e..52e15e079c61 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -115,7 +115,7 @@ #define IEEE80211_MAX_SSID_LEN 32 #define IEEE80211_MAX_MESH_ID_LEN 32 -#define IEEE80211_MESH_CONFIG_LEN 19 +#define IEEE80211_MESH_CONFIG_LEN 24 #define IEEE80211_QOS_CTL_LEN 2 #define IEEE80211_QOS_CTL_TID_MASK 0x000F -- cgit v1.2.3 From 06e4da268c0e8f3b8408403d65e47d2885a78ff2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?G=C3=A1bor=20Stefanik?= Date: Wed, 26 Aug 2009 20:51:26 +0200 Subject: ssb: Implement PMU LDO control and use it in b43 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Implement the "PMU LDO set voltage" and "PMU LDO PA ref enable" functions, and use them during LP-PHY baseband init in b43. Signed-off-by: Gábor Stefanik Signed-off-by: John W. Linville --- include/linux/ssb/ssb_driver_chipcommon.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ssb/ssb_driver_chipcommon.h b/include/linux/ssb/ssb_driver_chipcommon.h index d3b1d18922f2..4e27acf0a92f 100644 --- a/include/linux/ssb/ssb_driver_chipcommon.h +++ b/include/linux/ssb/ssb_driver_chipcommon.h @@ -629,5 +629,15 @@ extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc, /* PMU support */ extern void ssb_pmu_init(struct ssb_chipcommon *cc); +enum ssb_pmu_ldo_volt_id { + LDO_PAREF = 0, + LDO_VOLT1, + LDO_VOLT2, + LDO_VOLT3, +}; + +void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc, + enum ssb_pmu_ldo_volt_id id, u32 voltage); +void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on); #endif /* LINUX_SSB_CHIPCO_H_ */ -- cgit v1.2.3 From e55a5999ffcf72dc4d43d73618957964cb87065a Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Tue, 28 Jul 2009 17:41:53 +0800 Subject: ACPI: Handle CONFIG_ACPI=n better from linux/acpi.h linux/acpi.h is the top level header for interfacing with the ACPI sub-system, so acpi_disabled should be up there instead of down in asm/acpi.h -- particularly since asm/acpi.h doesn't exist for all architectures. Same story for acpi_table_parse(), which is a top-level API to Linux/ACPI. This is necessary for building some code that used to always depend on CONFIG_ACPI=y, but will soon also need to build with CONFIG_ACPI=n. Signed-off-by: Feng Tang Signed-off-by: Len Brown --- include/linux/acpi.h | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 34321cfffeab..3fce811bf9ac 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -292,7 +292,10 @@ void __init acpi_s4_no_nvs(void); extern acpi_status acpi_pci_osc_control_set(acpi_handle handle, u32 flags); extern void acpi_early_init(void); -#else /* CONFIG_ACPI */ +#else /* !CONFIG_ACPI */ + +#define acpi_disabled 1 + static inline void acpi_early_init(void) { } static inline int early_acpi_boot_init(void) @@ -331,5 +334,11 @@ static inline int acpi_check_mem_region(resource_size_t start, return 0; } +struct acpi_table_header; +static inline int acpi_table_parse(char *id, + int (*handler)(struct acpi_table_header *)) +{ + return -1; +} #endif /* !CONFIG_ACPI */ #endif /*_LINUX_ACPI_H*/ -- cgit v1.2.3 From 117a9ac777f8034d4675b821172d2ff71f6ec47a Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Fri, 14 Aug 2009 15:10:24 -0400 Subject: SFI: create linux/sfi.h include/linux/include/sfi.h defines everything that customers of SFI need to know in order to use the SFI suport in the kernel. The primary API is sfi_table_parse(), where a driver or another part of the kernel can supply a handler to parse the named table. sfi.h also includes the currently defined table signatures and table formats. Signed-off-by: Feng Tang Signed-off-by: Len Brown --- include/linux/sfi.h | 206 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 206 insertions(+) create mode 100644 include/linux/sfi.h (limited to 'include/linux') diff --git a/include/linux/sfi.h b/include/linux/sfi.h new file mode 100644 index 000000000000..9a6f7607174e --- /dev/null +++ b/include/linux/sfi.h @@ -0,0 +1,206 @@ +/* sfi.h Simple Firmware Interface */ + +/* + + This file is provided under a dual BSD/GPLv2 license. When using or + redistributing this file, you may do so under either license. + + GPL LICENSE SUMMARY + + Copyright(c) 2009 Intel Corporation. All rights reserved. + + This program is free software; you can redistribute it and/or modify + it under the terms of version 2 of the GNU General Public License as + published by the Free Software Foundation. + + This program is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + The full GNU General Public License is included in this distribution + in the file called LICENSE.GPL. + + BSD LICENSE + + Copyright(c) 2009 Intel Corporation. All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + * Neither the name of Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*/ + +#ifndef _LINUX_SFI_H +#define _LINUX_SFI_H + +/* Table signatures reserved by the SFI specification */ +#define SFI_SIG_SYST "SYST" +#define SFI_SIG_FREQ "FREQ" +#define SFI_SIG_IDLE "IDLE" +#define SFI_SIG_CPUS "CPUS" +#define SFI_SIG_MTMR "MTMR" +#define SFI_SIG_MRTC "MRTC" +#define SFI_SIG_MMAP "MMAP" +#define SFI_SIG_APIC "APIC" +#define SFI_SIG_XSDT "XSDT" +#define SFI_SIG_WAKE "WAKE" +#define SFI_SIG_SPIB "SPIB" +#define SFI_SIG_I2CB "I2CB" +#define SFI_SIG_GPEM "GPEM" + +#define SFI_SIGNATURE_SIZE 4 +#define SFI_OEM_ID_SIZE 6 +#define SFI_OEM_TABLE_ID_SIZE 8 + +#define SFI_SYST_SEARCH_BEGIN 0x000E0000 +#define SFI_SYST_SEARCH_END 0x000FFFFF + +#define SFI_GET_NUM_ENTRIES(ptable, entry_type) \ + ((ptable->header.len - sizeof(struct sfi_table_header)) / \ + (sizeof(entry_type))) +/* + * Table structures must be byte-packed to match the SFI specification, + * as they are provided by the BIOS. + */ +struct sfi_table_header { + char sig[SFI_SIGNATURE_SIZE]; + u32 len; + u8 rev; + u8 csum; + char oem_id[SFI_OEM_ID_SIZE]; + char oem_table_id[SFI_OEM_TABLE_ID_SIZE]; +} __packed; + +struct sfi_table_simple { + struct sfi_table_header header; + u64 pentry[1]; +} __packed; + +/* Comply with UEFI spec 2.1 */ +struct sfi_mem_entry { + u32 type; + u64 phys_start; + u64 virt_start; + u64 pages; + u64 attrib; +} __packed; + +struct sfi_cpu_table_entry { + u32 apic_id; +} __packed; + +struct sfi_cstate_table_entry { + u32 hint; /* MWAIT hint */ + u32 latency; /* latency in ms */ +} __packed; + +struct sfi_apic_table_entry { + u64 phys_addr; /* phy base addr for APIC reg */ +} __packed; + +struct sfi_freq_table_entry { + u32 freq_mhz; /* in MHZ */ + u32 latency; /* transition latency in ms */ + u32 ctrl_val; /* value to write to PERF_CTL */ +} __packed; + +struct sfi_wake_table_entry { + u64 phys_addr; /* pointer to where the wake vector locates */ +} __packed; + +struct sfi_timer_table_entry { + u64 phys_addr; /* phy base addr for the timer */ + u32 freq_hz; /* in HZ */ + u32 irq; +} __packed; + +struct sfi_rtc_table_entry { + u64 phys_addr; /* phy base addr for the RTC */ + u32 irq; +} __packed; + +struct sfi_spi_table_entry { + u16 host_num; /* attached to host 0, 1...*/ + u16 cs; /* chip select */ + u16 irq_info; + char name[16]; + u8 dev_info[10]; +} __packed; + +struct sfi_i2c_table_entry { + u16 host_num; + u16 addr; /* slave addr */ + u16 irq_info; + char name[16]; + u8 dev_info[10]; +} __packed; + +struct sfi_gpe_table_entry { + u16 logical_id; /* logical id */ + u16 phys_id; /* physical GPE id */ +} __packed; + + +typedef int (*sfi_table_handler) (struct sfi_table_header *table); + +#ifdef CONFIG_SFI +extern void __init sfi_init(void); +extern int __init sfi_platform_init(void); +extern void __init sfi_init_late(void); +extern int sfi_table_parse(char *signature, char *oem_id, char *oem_table_id, + sfi_table_handler handler); + +extern int sfi_disabled; +static inline void disable_sfi(void) +{ + sfi_disabled = 1; +} + +#else /* !CONFIG_SFI */ + +static inline void sfi_init(void) +{ +} + +static inline void sfi_init_late(void) +{ +} + +#define sfi_disabled 0 + +static inline int sfi_table_parse(char *signature, char *oem_id, + char *oem_table_id, + sfi_table_handler handler) +{ + return -1; +} + +#endif /* !CONFIG_SFI */ + +#endif /*_LINUX_SFI_H*/ -- cgit v1.2.3 From 13e82d023c4c3f13ab1e665cbb917a7ebba8935c Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Fri, 14 Aug 2009 15:17:53 -0400 Subject: SFI: add capability to parse ACPI tables Extend SFI to access standard ACPI tables. (eg. the PCI MCFG) using sfi_acpi_table_parse(). Note that this is _not_ a hybrid ACPI + SFI mode. The platform boots in either ACPI mode or SFI mode. SFI runs only with acpi_disabled=1, which can be set at build-time via CONFIG_ACPI=n, or at boot time by the failure to find ACPI platform support. So this extension simply allows SFI-platforms to re-use existing standard table formats that happen to be defined to live in ACPI envelopes. Signed-off-by: Feng Tang Signed-off-by: Len Brown --- include/linux/sfi_acpi.h | 93 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 93 insertions(+) create mode 100644 include/linux/sfi_acpi.h (limited to 'include/linux') diff --git a/include/linux/sfi_acpi.h b/include/linux/sfi_acpi.h new file mode 100644 index 000000000000..c4a5a8cd4469 --- /dev/null +++ b/include/linux/sfi_acpi.h @@ -0,0 +1,93 @@ +/* sfi.h Simple Firmware Interface */ + +/* + + This file is provided under a dual BSD/GPLv2 license. When using or + redistributing this file, you may do so under either license. + + GPL LICENSE SUMMARY + + Copyright(c) 2009 Intel Corporation. All rights reserved. + + This program is free software; you can redistribute it and/or modify + it under the terms of version 2 of the GNU General Public License as + published by the Free Software Foundation. + + This program is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + The full GNU General Public License is included in this distribution + in the file called LICENSE.GPL. + + BSD LICENSE + + Copyright(c) 2009 Intel Corporation. All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + * Neither the name of Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +*/ + +#ifndef _LINUX_SFI_ACPI_H +#define _LINUX_SFI_ACPI_H + +#ifdef CONFIG_SFI +#include /* struct acpi_table_header */ + +extern int sfi_acpi_table_parse(char *signature, char *oem_id, + char *oem_table_id, + int (*handler)(struct acpi_table_header *)); + +static inline int acpi_sfi_table_parse(char *signature, + int (*handler)(struct acpi_table_header *)) +{ + if (!acpi_table_parse(signature, handler)) + return 0; + + return sfi_acpi_table_parse(signature, NULL, NULL, handler); +} +#else /* !CONFIG_SFI */ + +static inline int sfi_acpi_table_parse(char *signature, char *oem_id, + char *oem_table_id, + int (*handler)(struct acpi_table_header *)) +{ + return -1; +} + +static inline int acpi_sfi_table_parse(char *signature, + int (*handler)(struct acpi_table_header *)) +{ + return acpi_table_parse(signature, handler); +} +#endif /* !CONFIG_SFI */ + +#endif /*_LINUX_SFI_ACPI_H*/ -- cgit v1.2.3 From 2befdcea96fcd9a13e94373c66ea1dd7365d2a74 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Fri, 28 Aug 2009 12:28:45 +0000 Subject: tg3: Add new 5785 10/100 only device ID This patch adds a new device ID for those 5785 devices that will only use 10/100 phys. Signed-off-by: Matt Carlson Signed-off-by: David S. Miller --- include/linux/pci_ids.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index fdc3110c90c0..85492546d33d 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2064,7 +2064,6 @@ #define PCI_DEVICE_ID_TIGON3_5787M 0x1693 #define PCI_DEVICE_ID_TIGON3_5782 0x1696 #define PCI_DEVICE_ID_TIGON3_5784 0x1698 -#define PCI_DEVICE_ID_TIGON3_5785 0x1699 #define PCI_DEVICE_ID_TIGON3_5786 0x169a #define PCI_DEVICE_ID_TIGON3_5787 0x169b #define PCI_DEVICE_ID_TIGON3_5788 0x169c -- cgit v1.2.3 From ad283ea4a3ce82cda2efe33163748a397b31b1eb Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sat, 29 Aug 2009 19:09:26 -0700 Subject: async_tx: add sum check flags Replace the flat zero_sum_result with a collection of flags to contain the P (xor) zero-sum result, and the soon to be utilized Q (raid6 reed solomon syndrome) zero-sum result. Use the SUM_CHECK_ namespace instead of DMA_ since these flags will be used on non-dma-zero-sum enabled platforms. Reviewed-by: Andre Noll Acked-by: Maciej Sosnowski Signed-off-by: Dan Williams --- include/linux/async_tx.h | 2 +- include/linux/dmaengine.h | 21 ++++++++++++++++++++- 2 files changed, 21 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/async_tx.h b/include/linux/async_tx.h index 00cfb637ddf2..3d21a2517518 100644 --- a/include/linux/async_tx.h +++ b/include/linux/async_tx.h @@ -148,7 +148,7 @@ async_xor(struct page *dest, struct page **src_list, unsigned int offset, struct dma_async_tx_descriptor * async_xor_val(struct page *dest, struct page **src_list, unsigned int offset, - int src_cnt, size_t len, u32 *result, + int src_cnt, size_t len, enum sum_check_flags *result, struct async_submit_ctl *submit); struct dma_async_tx_descriptor * diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 6768727d00d7..02447afcebad 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -86,6 +86,25 @@ enum dma_ctrl_flags { DMA_COMPL_SKIP_DEST_UNMAP = (1 << 3), }; +/** + * enum sum_check_bits - bit position of pq_check_flags + */ +enum sum_check_bits { + SUM_CHECK_P = 0, + SUM_CHECK_Q = 1, +}; + +/** + * enum pq_check_flags - result of async_{xor,pq}_zero_sum operations + * @SUM_CHECK_P_RESULT - 1 if xor zero sum error, 0 otherwise + * @SUM_CHECK_Q_RESULT - 1 if reed-solomon zero sum error, 0 otherwise + */ +enum sum_check_flags { + SUM_CHECK_P_RESULT = (1 << SUM_CHECK_P), + SUM_CHECK_Q_RESULT = (1 << SUM_CHECK_Q), +}; + + /** * dma_cap_mask_t - capabilities bitmap modeled after cpumask_t. * See linux/cpumask.h @@ -245,7 +264,7 @@ struct dma_device { unsigned int src_cnt, size_t len, unsigned long flags); struct dma_async_tx_descriptor *(*device_prep_dma_xor_val)( struct dma_chan *chan, dma_addr_t *src, unsigned int src_cnt, - size_t len, u32 *result, unsigned long flags); + size_t len, enum sum_check_flags *result, unsigned long flags); struct dma_async_tx_descriptor *(*device_prep_dma_memset)( struct dma_chan *chan, dma_addr_t dest, int value, size_t len, unsigned long flags); -- cgit v1.2.3 From 95475e57113c66aac7583925736ed2e2d58c990d Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 14 Jul 2009 12:19:02 -0700 Subject: async_tx: remove walk of tx->parent chain in dma_wait_for_async_tx We currently walk the parent chain when waiting for a given tx to complete however this walk may race with the driver cleanup routine. The routines in async_raid6_recov.c may fall back to the synchronous path at any point so we need to be prepared to call async_tx_quiesce() (which calls dma_wait_for_async_tx). To remove the ->parent walk we guarantee that every time a dependency is attached ->issue_pending() is invoked, then we can simply poll the initial descriptor until completion. This also allows for a lighter weight 'issue pending' implementation as there is no longer a requirement to iterate through all the channels' ->issue_pending() routines as long as operations have been submitted in an ordered chain. async_tx_issue_pending() is added for this case. Signed-off-by: Dan Williams --- include/linux/async_tx.h | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'include/linux') diff --git a/include/linux/async_tx.h b/include/linux/async_tx.h index 3d21a2517518..12a2efcbd565 100644 --- a/include/linux/async_tx.h +++ b/include/linux/async_tx.h @@ -83,6 +83,24 @@ struct async_submit_ctl { #ifdef CONFIG_DMA_ENGINE #define async_tx_issue_pending_all dma_issue_pending_all + +/** + * async_tx_issue_pending - send pending descriptor to the hardware channel + * @tx: descriptor handle to retrieve hardware context + * + * Note: any dependent operations will have already been issued by + * async_tx_channel_switch, or (in the case of no channel switch) will + * be already pending on this channel. + */ +static inline void async_tx_issue_pending(struct dma_async_tx_descriptor *tx) +{ + if (likely(tx)) { + struct dma_chan *chan = tx->chan; + struct dma_device *dma = chan->device; + + dma->device_issue_pending(chan); + } +} #ifdef CONFIG_ARCH_HAS_ASYNC_TX_FIND_CHANNEL #include #else @@ -98,6 +116,11 @@ static inline void async_tx_issue_pending_all(void) do { } while (0); } +static inline void async_tx_issue_pending(struct dma_async_tx_descriptor *tx) +{ + do { } while (0); +} + static inline struct dma_chan * async_tx_find_channel(struct async_submit_ctl *submit, enum dma_transaction_type tx_type, struct page **dst, -- cgit v1.2.3 From b2f46fd8ef3dff2ab30f31126833f78b7480283a Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 14 Jul 2009 12:20:36 -0700 Subject: async_tx: add support for asynchronous GF multiplication [ Based on an original patch by Yuri Tikhonov ] This adds support for doing asynchronous GF multiplication by adding two additional functions to the async_tx API: async_gen_syndrome() does simultaneous XOR and Galois field multiplication of sources. async_syndrome_val() validates the given source buffers against known P and Q values. When a request is made to run async_pq against more than the hardware maximum number of supported sources we need to reuse the previous generated P and Q values as sources into the next operation. Care must be taken to remove Q from P' and P from Q'. For example to perform a 5 source pq op with hardware that only supports 4 sources at a time the following approach is taken: p, q = PQ(src0, src1, src2, src3, COEF({01}, {02}, {04}, {08})) p', q' = PQ(p, q, q, src4, COEF({00}, {01}, {00}, {10})) p' = p + q + q + src4 = p + src4 q' = {00}*p + {01}*q + {00}*q + {10}*src4 = q + {10}*src4 Note: 4 is the minimum acceptable maxpq otherwise we punt to synchronous-software path. The DMA_PREP_CONTINUE flag indicates to the driver to reuse p and q as sources (in the above manner) and fill the remaining slots up to maxpq with the new sources/coefficients. Note1: Some devices have native support for P+Q continuation and can skip this extra work. Devices with this capability can advertise it with dma_set_maxpq. It is up to each driver how to handle the DMA_PREP_CONTINUE flag. Note2: The api supports disabling the generation of P when generating Q, this is ignored by the synchronous path but is implemented by some dma devices to save unnecessary writes. In this case the continuation algorithm is simplified to only reuse Q as a source. Cc: H. Peter Anvin Cc: David Woodhouse Signed-off-by: Yuri Tikhonov Signed-off-by: Ilya Yanok Reviewed-by: Andre Noll Acked-by: Maciej Sosnowski Signed-off-by: Dan Williams --- include/linux/async_tx.h | 9 +++++ include/linux/dmaengine.h | 87 +++++++++++++++++++++++++++++++++++++++++++---- 2 files changed, 90 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/async_tx.h b/include/linux/async_tx.h index 12a2efcbd565..e6ce5f004f98 100644 --- a/include/linux/async_tx.h +++ b/include/linux/async_tx.h @@ -185,5 +185,14 @@ async_memset(struct page *dest, int val, unsigned int offset, struct dma_async_tx_descriptor *async_trigger_callback(struct async_submit_ctl *submit); +struct dma_async_tx_descriptor * +async_gen_syndrome(struct page **blocks, unsigned int offset, int src_cnt, + size_t len, struct async_submit_ctl *submit); + +struct dma_async_tx_descriptor * +async_syndrome_val(struct page **blocks, unsigned int offset, int src_cnt, + size_t len, enum sum_check_flags *pqres, struct page *spare, + struct async_submit_ctl *submit); + void async_tx_quiesce(struct dma_async_tx_descriptor **tx); #endif /* _ASYNC_TX_H_ */ diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 02447afcebad..ce010cd991d2 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -52,7 +52,7 @@ enum dma_status { enum dma_transaction_type { DMA_MEMCPY, DMA_XOR, - DMA_PQ_XOR, + DMA_PQ, DMA_DUAL_XOR, DMA_PQ_UPDATE, DMA_XOR_VAL, @@ -70,20 +70,28 @@ enum dma_transaction_type { /** * enum dma_ctrl_flags - DMA flags to augment operation preparation, - * control completion, and communicate status. + * control completion, and communicate status. * @DMA_PREP_INTERRUPT - trigger an interrupt (callback) upon completion of - * this transaction + * this transaction * @DMA_CTRL_ACK - the descriptor cannot be reused until the client - * acknowledges receipt, i.e. has has a chance to establish any - * dependency chains + * acknowledges receipt, i.e. has has a chance to establish any dependency + * chains * @DMA_COMPL_SKIP_SRC_UNMAP - set to disable dma-unmapping the source buffer(s) * @DMA_COMPL_SKIP_DEST_UNMAP - set to disable dma-unmapping the destination(s) + * @DMA_PREP_PQ_DISABLE_P - prevent generation of P while generating Q + * @DMA_PREP_PQ_DISABLE_Q - prevent generation of Q while generating P + * @DMA_PREP_CONTINUE - indicate to a driver that it is reusing buffers as + * sources that were the result of a previous operation, in the case of a PQ + * operation it continues the calculation with new sources */ enum dma_ctrl_flags { DMA_PREP_INTERRUPT = (1 << 0), DMA_CTRL_ACK = (1 << 1), DMA_COMPL_SKIP_SRC_UNMAP = (1 << 2), DMA_COMPL_SKIP_DEST_UNMAP = (1 << 3), + DMA_PREP_PQ_DISABLE_P = (1 << 4), + DMA_PREP_PQ_DISABLE_Q = (1 << 5), + DMA_PREP_CONTINUE = (1 << 6), }; /** @@ -226,6 +234,7 @@ struct dma_async_tx_descriptor { * @global_node: list_head for global dma_device_list * @cap_mask: one or more dma_capability flags * @max_xor: maximum number of xor sources, 0 if no capability + * @max_pq: maximum number of PQ sources and PQ-continue capability * @dev_id: unique device ID * @dev: struct device reference for dma mapping api * @device_alloc_chan_resources: allocate resources and return the @@ -234,6 +243,8 @@ struct dma_async_tx_descriptor { * @device_prep_dma_memcpy: prepares a memcpy operation * @device_prep_dma_xor: prepares a xor operation * @device_prep_dma_xor_val: prepares a xor validation operation + * @device_prep_dma_pq: prepares a pq operation + * @device_prep_dma_pq_val: prepares a pqzero_sum operation * @device_prep_dma_memset: prepares a memset operation * @device_prep_dma_interrupt: prepares an end of chain interrupt operation * @device_prep_slave_sg: prepares a slave dma operation @@ -248,7 +259,9 @@ struct dma_device { struct list_head channels; struct list_head global_node; dma_cap_mask_t cap_mask; - int max_xor; + unsigned short max_xor; + unsigned short max_pq; + #define DMA_HAS_PQ_CONTINUE (1 << 15) int dev_id; struct device *dev; @@ -265,6 +278,14 @@ struct dma_device { struct dma_async_tx_descriptor *(*device_prep_dma_xor_val)( struct dma_chan *chan, dma_addr_t *src, unsigned int src_cnt, size_t len, enum sum_check_flags *result, unsigned long flags); + struct dma_async_tx_descriptor *(*device_prep_dma_pq)( + struct dma_chan *chan, dma_addr_t *dst, dma_addr_t *src, + unsigned int src_cnt, const unsigned char *scf, + size_t len, unsigned long flags); + struct dma_async_tx_descriptor *(*device_prep_dma_pq_val)( + struct dma_chan *chan, dma_addr_t *pq, dma_addr_t *src, + unsigned int src_cnt, const unsigned char *scf, size_t len, + enum sum_check_flags *pqres, unsigned long flags); struct dma_async_tx_descriptor *(*device_prep_dma_memset)( struct dma_chan *chan, dma_addr_t dest, int value, size_t len, unsigned long flags); @@ -283,6 +304,60 @@ struct dma_device { void (*device_issue_pending)(struct dma_chan *chan); }; +static inline void +dma_set_maxpq(struct dma_device *dma, int maxpq, int has_pq_continue) +{ + dma->max_pq = maxpq; + if (has_pq_continue) + dma->max_pq |= DMA_HAS_PQ_CONTINUE; +} + +static inline bool dmaf_continue(enum dma_ctrl_flags flags) +{ + return (flags & DMA_PREP_CONTINUE) == DMA_PREP_CONTINUE; +} + +static inline bool dmaf_p_disabled_continue(enum dma_ctrl_flags flags) +{ + enum dma_ctrl_flags mask = DMA_PREP_CONTINUE | DMA_PREP_PQ_DISABLE_P; + + return (flags & mask) == mask; +} + +static inline bool dma_dev_has_pq_continue(struct dma_device *dma) +{ + return (dma->max_pq & DMA_HAS_PQ_CONTINUE) == DMA_HAS_PQ_CONTINUE; +} + +static unsigned short dma_dev_to_maxpq(struct dma_device *dma) +{ + return dma->max_pq & ~DMA_HAS_PQ_CONTINUE; +} + +/* dma_maxpq - reduce maxpq in the face of continued operations + * @dma - dma device with PQ capability + * @flags - to check if DMA_PREP_CONTINUE and DMA_PREP_PQ_DISABLE_P are set + * + * When an engine does not support native continuation we need 3 extra + * source slots to reuse P and Q with the following coefficients: + * 1/ {00} * P : remove P from Q', but use it as a source for P' + * 2/ {01} * Q : use Q to continue Q' calculation + * 3/ {00} * Q : subtract Q from P' to cancel (2) + * + * In the case where P is disabled we only need 1 extra source: + * 1/ {01} * Q : use Q to continue Q' calculation + */ +static inline int dma_maxpq(struct dma_device *dma, enum dma_ctrl_flags flags) +{ + if (dma_dev_has_pq_continue(dma) || !dmaf_continue(flags)) + return dma_dev_to_maxpq(dma); + else if (dmaf_p_disabled_continue(flags)) + return dma_dev_to_maxpq(dma) - 1; + else if (dmaf_continue(flags)) + return dma_dev_to_maxpq(dma) - 3; + BUG(); +} + /* --- public DMA engine API --- */ #ifdef CONFIG_DMA_ENGINE -- cgit v1.2.3 From 0a82a6239beecc95db6e05fe43ee62d16b381d38 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 14 Jul 2009 12:20:37 -0700 Subject: async_tx: add support for asynchronous RAID6 recovery operations async_raid6_2data_recov() recovers two data disk failures async_raid6_datap_recov() recovers a data disk and the P disk These routines are a port of the synchronous versions found in drivers/md/raid6recov.c. The primary difference is breaking out the xor operations into separate calls to async_xor. Two helper routines are introduced to perform scalar multiplication where needed. async_sum_product() multiplies two sources by scalar coefficients and then sums (xor) the result. async_mult() simply multiplies a single source by a scalar. This implemention also includes, in contrast to the original synchronous-only code, special case handling for the 4-disk and 5-disk array cases. In these situations the default N-disk algorithm will present 0-source or 1-source operations to dma devices. To cover for dma devices where the minimum source count is 2 we implement 4-disk and 5-disk handling in the recovery code. [ Impact: asynchronous raid6 recovery routines for 2data and datap cases ] Cc: Yuri Tikhonov Cc: Ilya Yanok Cc: H. Peter Anvin Cc: David Woodhouse Reviewed-by: Andre Noll Acked-by: Maciej Sosnowski Signed-off-by: Dan Williams --- include/linux/async_tx.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/async_tx.h b/include/linux/async_tx.h index e6ce5f004f98..866e61c4e2e0 100644 --- a/include/linux/async_tx.h +++ b/include/linux/async_tx.h @@ -194,5 +194,13 @@ async_syndrome_val(struct page **blocks, unsigned int offset, int src_cnt, size_t len, enum sum_check_flags *pqres, struct page *spare, struct async_submit_ctl *submit); +struct dma_async_tx_descriptor * +async_raid6_2data_recov(int src_num, size_t bytes, int faila, int failb, + struct page **ptrs, struct async_submit_ctl *submit); + +struct dma_async_tx_descriptor * +async_raid6_datap_recov(int src_num, size_t bytes, int faila, + struct page **ptrs, struct async_submit_ctl *submit); + void async_tx_quiesce(struct dma_async_tx_descriptor **tx); #endif /* _ASYNC_TX_H_ */ -- cgit v1.2.3 From acdfcd04d9df7d084ff752f82afad6ed4ad5f363 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Fri, 28 Aug 2009 14:28:54 +0300 Subject: SLUB: fix ARCH_KMALLOC_MINALIGN cases 64 and 256 If the minalign is 64 bytes, then the 96 byte cache should not be created because it would conflict with the 128 byte cache. If the minalign is 256 bytes, patching the size_index table should not result in a buffer overrun. The calculation "(i - 1) / 8" used to access size_index[] is moved to a separate function as suggested by Christoph Lameter. Acked-by: Christoph Lameter Signed-off-by: Aaro Koskinen Signed-off-by: Pekka Enberg --- include/linux/slub_def.h | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index 4dcbc2c71491..aa5d4a69d461 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -152,12 +152,10 @@ static __always_inline int kmalloc_index(size_t size) if (size <= KMALLOC_MIN_SIZE) return KMALLOC_SHIFT_LOW; -#if KMALLOC_MIN_SIZE <= 64 - if (size > 64 && size <= 96) + if (KMALLOC_MIN_SIZE <= 32 && size > 64 && size <= 96) return 1; - if (size > 128 && size <= 192) + if (KMALLOC_MIN_SIZE <= 64 && size > 128 && size <= 192) return 2; -#endif if (size <= 8) return 3; if (size <= 16) return 4; if (size <= 32) return 5; -- cgit v1.2.3 From e500011ffa191d662ac64d4ada6a5187b3180e16 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 30 Aug 2009 13:19:12 -0700 Subject: timers: Drop a function prototype Drop prototype for non-existent next_timer_interrupt() function. Signed-off-by: Randy Dunlap Cc: akpm LKML-Reference: <4A9ADEC0.70306@oracle.com> Signed-off-by: Thomas Gleixner --- include/linux/timer.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/timer.h b/include/linux/timer.h index be62ec2ebea5..a2d1eb6cb3f0 100644 --- a/include/linux/timer.h +++ b/include/linux/timer.h @@ -173,11 +173,6 @@ extern int mod_timer_pinned(struct timer_list *timer, unsigned long expires); */ #define NEXT_TIMER_MAX_DELTA ((1UL << 30) - 1) -/* - * Return when the next timer-wheel timeout occurs (in absolute jiffies), - * locks the timer base: - */ -extern unsigned long next_timer_interrupt(void); /* * Return when the next timer-wheel timeout occurs (in absolute jiffies), * locks the timer base and does the comparison against the given -- cgit v1.2.3 From 7b3d3e4fc685a7d7e0b4c207ce24dfbab5689eb0 Mon Sep 17 00:00:00 2001 From: Krishna Kumar Date: Sat, 29 Aug 2009 20:21:21 +0000 Subject: netdevice: Consolidate to use existing macros where available. Patch compiled and 32 simultaneous netperf testing ran fine. Signed-off-by: Krishna Kumar Signed-off-by: David S. Miller --- include/linux/netdevice.h | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 9192cdf5bd2c..60d3aac49ed4 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1257,7 +1257,7 @@ static inline void netif_tx_wake_queue(struct netdev_queue *dev_queue) { #ifdef CONFIG_NETPOLL_TRAP if (netpoll_trap()) { - clear_bit(__QUEUE_STATE_XOFF, &dev_queue->state); + netif_tx_start_queue(dev_queue); return; } #endif @@ -1363,7 +1363,8 @@ static inline int netif_running(const struct net_device *dev) static inline void netif_start_subqueue(struct net_device *dev, u16 queue_index) { struct netdev_queue *txq = netdev_get_tx_queue(dev, queue_index); - clear_bit(__QUEUE_STATE_XOFF, &txq->state); + + netif_tx_start_queue(txq); } /** @@ -1380,7 +1381,7 @@ static inline void netif_stop_subqueue(struct net_device *dev, u16 queue_index) if (netpoll_trap()) return; #endif - set_bit(__QUEUE_STATE_XOFF, &txq->state); + netif_tx_stop_queue(txq); } /** @@ -1394,7 +1395,8 @@ static inline int __netif_subqueue_stopped(const struct net_device *dev, u16 queue_index) { struct netdev_queue *txq = netdev_get_tx_queue(dev, queue_index); - return test_bit(__QUEUE_STATE_XOFF, &txq->state); + + return netif_tx_queue_stopped(txq); } static inline int netif_subqueue_stopped(const struct net_device *dev, @@ -1746,8 +1748,7 @@ static inline void netif_tx_unlock(struct net_device *dev) * force a schedule. */ clear_bit(__QUEUE_STATE_FROZEN, &txq->state); - if (!test_bit(__QUEUE_STATE_XOFF, &txq->state)) - __netif_schedule(txq->qdisc); + netif_schedule_queue(txq); } spin_unlock(&dev->tx_global_lock); } -- cgit v1.2.3 From dc1f8bf68b311b1537cb65893430b6796118498a Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Mon, 31 Aug 2009 19:50:40 +0000 Subject: netdev: change transmit to limited range type The transmit function should only return one of three possible values, some drivers got confused and returned errno's or other values. This changes the definition so that this can be caught at compile time. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- include/linux/netdevice.h | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 60d3aac49ed4..376a2e1ac00d 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -79,17 +79,19 @@ struct wireless_dev; #define net_xmit_eval(e) ((e) == NET_XMIT_CN? 0 : (e)) #define net_xmit_errno(e) ((e) != NET_XMIT_CN ? -ENOBUFS : 0) +/* Driver transmit return codes */ +enum netdev_tx { + NETDEV_TX_OK = 0, /* driver took care of packet */ + NETDEV_TX_BUSY, /* driver tx path was busy*/ + NETDEV_TX_LOCKED = -1, /* driver tx lock was already taken */ +}; +typedef enum netdev_tx netdev_tx_t; + #endif #define MAX_ADDR_LEN 32 /* Largest hardware address length */ -/* Driver transmit return codes */ -#define NETDEV_TX_OK 0 /* driver took care of packet */ -#define NETDEV_TX_BUSY 1 /* driver tx path was busy*/ -#define NETDEV_TX_LOCKED -1 /* driver tx lock was already taken */ - #ifdef __KERNEL__ - /* * Compute the worst case header length according to the protocols * used. @@ -507,9 +509,11 @@ struct netdev_queue { * This function is called when network device transistions to the down * state. * - * int (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev); + * netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, + * struct net_device *dev); * Called when a packet needs to be transmitted. - * Must return NETDEV_TX_OK , NETDEV_TX_BUSY, or NETDEV_TX_LOCKED, + * Must return NETDEV_TX_OK , NETDEV_TX_BUSY. + * (can also return NETDEV_TX_LOCKED iff NETIF_F_LLTX) * Required can not be NULL. * * u16 (*ndo_select_queue)(struct net_device *dev, struct sk_buff *skb); @@ -580,7 +584,7 @@ struct net_device_ops { void (*ndo_uninit)(struct net_device *dev); int (*ndo_open)(struct net_device *dev); int (*ndo_stop)(struct net_device *dev); - int (*ndo_start_xmit) (struct sk_buff *skb, + netdev_tx_t (*ndo_start_xmit) (struct sk_buff *skb, struct net_device *dev); u16 (*ndo_select_queue)(struct net_device *dev, struct sk_buff *skb); -- cgit v1.2.3 From 25a79c41ce0ce88a4288adf278e9b0e00f228383 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Mon, 31 Aug 2009 19:50:45 +0000 Subject: usbnet: convert to netdev_tx_t Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- include/linux/usb/usbnet.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index 09514252d84e..bb69e256cd16 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -182,7 +182,8 @@ struct skb_data { /* skb->cb is one of these */ extern int usbnet_open (struct net_device *net); extern int usbnet_stop (struct net_device *net); -extern int usbnet_start_xmit (struct sk_buff *skb, struct net_device *net); +extern netdev_tx_t usbnet_start_xmit (struct sk_buff *skb, + struct net_device *net); extern void usbnet_tx_timeout (struct net_device *net); extern int usbnet_change_mtu (struct net_device *net, int new_mtu); -- cgit v1.2.3 From 4c5d502d8b2db8947c44dc44bdc67dbe55cce2b9 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Mon, 31 Aug 2009 19:50:48 +0000 Subject: hdlc: convert to netdev_tx_t Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- include/linux/hdlc.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/hdlc.h b/include/linux/hdlc.h index 6a6e701f1631..ee275c8b3df1 100644 --- a/include/linux/hdlc.h +++ b/include/linux/hdlc.h @@ -38,7 +38,7 @@ struct hdlc_proto { int (*ioctl)(struct net_device *dev, struct ifreq *ifr); __be16 (*type_trans)(struct sk_buff *skb, struct net_device *dev); int (*netif_rx)(struct sk_buff *skb); - int (*xmit)(struct sk_buff *skb, struct net_device *dev); + netdev_tx_t (*xmit)(struct sk_buff *skb, struct net_device *dev); struct module *module; struct hdlc_proto *next; /* next protocol in the list */ }; @@ -51,7 +51,7 @@ typedef struct hdlc_device { unsigned short encoding, unsigned short parity); /* hardware driver must handle this instead of dev->hard_start_xmit */ - int (*xmit)(struct sk_buff *skb, struct net_device *dev); + netdev_tx_t (*xmit)(struct sk_buff *skb, struct net_device *dev); /* Things below are for HDLC layer internal use only */ const struct hdlc_proto *proto; @@ -60,7 +60,7 @@ typedef struct hdlc_device { spinlock_t state_lock; void *state; void *priv; -}hdlc_device; +} hdlc_device; @@ -106,7 +106,7 @@ void hdlc_close(struct net_device *dev); /* May be used by hardware driver */ int hdlc_change_mtu(struct net_device *dev, int new_mtu); /* Must be pointed to by hw driver's dev->netdev_ops->ndo_start_xmit */ -int hdlc_start_xmit(struct sk_buff *skb, struct net_device *dev); +netdev_tx_t hdlc_start_xmit(struct sk_buff *skb, struct net_device *dev); int attach_hdlc_protocol(struct net_device *dev, struct hdlc_proto *proto, size_t size); -- cgit v1.2.3 From 61357325f377889a1daffa14962d705dc814dd0e Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Mon, 31 Aug 2009 19:50:58 +0000 Subject: netdev: convert bulk of drivers to netdev_tx_t In a couple of cases collapse some extra code like: int retval = NETDEV_TX_OK; ... return retval; into return NETDEV_TX_OK; Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- include/linux/arcdevice.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/arcdevice.h b/include/linux/arcdevice.h index cd4bcb6989ce..7d650a0e3d8f 100644 --- a/include/linux/arcdevice.h +++ b/include/linux/arcdevice.h @@ -337,7 +337,8 @@ struct net_device *alloc_arcdev(const char *name); int arcnet_open(struct net_device *dev); int arcnet_close(struct net_device *dev); -int arcnet_send_packet(struct sk_buff *skb, struct net_device *dev); +netdev_tx_t arcnet_send_packet(struct sk_buff *skb, + struct net_device *dev); void arcnet_timeout(struct net_device *dev); #endif /* __KERNEL__ */ -- cgit v1.2.3 From cb45439977d3602b91dd0aca2d94fa3b32aebba6 Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Mon, 31 Aug 2009 12:31:36 +0000 Subject: net: Add ndo_fcoe_enable/ndo_fcoe_disable to net_device_ops Add ndo_fcoe_enable/_disable to net_device_ops so the corresponding HW can initialize itself for FCoE traffic or clean up after FCoE traffic is done. This is expected to be called by the kernel FCoE stack upon receiving a request for creating an FCoE instance on the corresponding netdev interface. When implemented by the actual HW, the HW driver check the op code to perform corresponding initialization or clean up for FCoE. The initialization normally includes allocating extra queues for FCoE, setting corresponding HW registers for FCoE, indicating FCoE offload features via netdev, etc. The clean-up would include releasing the resources allocated for FCoE. Signed-off-by: Yi Zou Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- include/linux/netdevice.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 376a2e1ac00d..121cbad0aae5 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -627,6 +627,8 @@ struct net_device_ops { void (*ndo_poll_controller)(struct net_device *dev); #endif #if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE) + int (*ndo_fcoe_enable)(struct net_device *dev); + int (*ndo_fcoe_disable)(struct net_device *dev); int (*ndo_fcoe_ddp_setup)(struct net_device *dev, u16 xid, struct scatterlist *sgl, -- cgit v1.2.3 From 0f6f290259896afdca30e1ff4a28aff8edd79a14 Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Mon, 31 Aug 2009 12:32:34 +0000 Subject: dcbnl: Add support for setapp/getapp commands to dcbnl This patch adds dcbnl command definitions to support setapp/getapp functionality from the IEEE 802.1Qaz Data Center Bridging Capability Exchange protocol (DCBX) specification. Section 3.3 defines the application protocol and its 802.1p user priority in DCBX, which is implemented here as a pair of setapp/getapp commands in the kernel dcbnl for setting and retrieving the user priority for an given application protocol. The protocol is identified by the combination of an id and an idtype. Currently, when idtype is 0, the corresponding id gives the ether type of this protocol, e.g., for FCoE, it will be 0x8906; when idtype is 1, then the corresponding id gives the TCP or UDP port number. For more information regarding DCBX spec., please refer to the following: http://www.ieee802.org/1/files/public/docs2008/ az-wadekar-dcbx-capability-exchange-discovery-protocol-1108-v1.01.pdf Signed-off-by: Yi Zou Acked-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- include/linux/dcbnl.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'include/linux') diff --git a/include/linux/dcbnl.h b/include/linux/dcbnl.h index 7d2e10006188..b7cdbb4373df 100644 --- a/include/linux/dcbnl.h +++ b/include/linux/dcbnl.h @@ -50,6 +50,8 @@ struct dcbmsg { * @DCB_CMD_SNUMTCS: set the number of traffic classes * @DCB_CMD_GBCN: set backward congestion notification configuration * @DCB_CMD_SBCN: get backward congestion notification configration. + * @DCB_CMD_GAPP: get application protocol configuration + * @DCB_CMD_SAPP: set application protocol configuration */ enum dcbnl_commands { DCB_CMD_UNDEFINED, @@ -80,6 +82,9 @@ enum dcbnl_commands { DCB_CMD_BCN_GCFG, DCB_CMD_BCN_SCFG, + DCB_CMD_GAPP, + DCB_CMD_SAPP, + __DCB_CMD_ENUM_MAX, DCB_CMD_MAX = __DCB_CMD_ENUM_MAX - 1, }; @@ -114,6 +119,7 @@ enum dcbnl_attrs { DCB_ATTR_CAP, DCB_ATTR_NUMTCS, DCB_ATTR_BCN, + DCB_ATTR_APP, __DCB_ATTR_ENUM_MAX, DCB_ATTR_MAX = __DCB_ATTR_ENUM_MAX - 1, @@ -338,5 +344,17 @@ enum dcb_general_attr_values { DCB_ATTR_VALUE_UNDEFINED = 0xff }; +#define DCB_APP_IDTYPE_ETHTYPE 0x00 +#define DCB_APP_IDTYPE_PORTNUM 0x01 +enum dcbnl_app_attrs { + DCB_APP_ATTR_UNDEFINED, + + DCB_APP_ATTR_IDTYPE, + DCB_APP_ATTR_ID, + DCB_APP_ATTR_PRIORITY, + + __DCB_APP_ATTR_ENUM_MAX, + DCB_APP_ATTR_MAX = __DCB_APP_ATTR_ENUM_MAX - 1, +}; #endif /* __LINUX_DCBNL_H__ */ -- cgit v1.2.3 From 8aa84ad8d6c740a04386f599694609ee4998e82e Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 24 Jul 2009 15:25:05 +0200 Subject: [CPUFREQ] Introduce global, not per core: /sys/devices/system/cpu/cpufreq Currently everything in the cpufreq layer is per core based. This does not reflect reality, for example ondemand on conservative governors have global sysfs variables. Introduce a global cpufreq directory and add the kobject to the governor struct, so that governors can easily access it. The directory is initialized in the cpufreq_core_init initcall and thus will always be created if cpufreq is compiled in, even if no cpufreq driver is active later. Signed-off-by: Thomas Renninger Signed-off-by: Dave Jones --- include/linux/cpufreq.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 161042746afc..44717eb47639 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -65,6 +65,9 @@ static inline int cpufreq_unregister_notifier(struct notifier_block *nb, struct cpufreq_governor; +/* /sys/devices/system/cpu/cpufreq: entry point for global variables */ +extern struct kobject *cpufreq_global_kobject; + #define CPUFREQ_ETERNAL (-1) struct cpufreq_cpuinfo { unsigned int max_freq; @@ -274,6 +277,13 @@ struct freq_attr { ssize_t (*store)(struct cpufreq_policy *, const char *, size_t count); }; +struct global_attr { + struct attribute attr; + ssize_t (*show)(struct kobject *kobj, + struct attribute *attr, char *buf); + ssize_t (*store)(struct kobject *a, struct attribute *b, + const char *c, size_t count); +}; /********************************************************************* * CPUFREQ 2.6. INTERFACE * -- cgit v1.2.3 From 8bc11b491b6cad75e737f1d38bb4b261bd95b291 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 26 Aug 2009 18:13:17 +0200 Subject: rfkill: relicense header file MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This header file is copied into userspace tools that need not be GPLv2 licensed, make that easier. Signed-off-by: Johannes Berg Acked-by: Alan Jenkins Acked-by: Henrique de Moraes Holschuh Acked-by: Iñaky Pérez-González Acked-by: Ivo van Doorn Acked-by: Jaswinder Singh Rajput Acked-by: Michael Buesch Acked-by: Tomas Winkler Signed-off-by: John W. Linville --- include/linux/rfkill.h | 23 ++++++++++------------- 1 file changed, 10 insertions(+), 13 deletions(-) (limited to 'include/linux') diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index 21ca51bf4dd2..3392c59d2706 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -6,20 +6,17 @@ * Copyright (C) 2007 Dmitry Torokhov * Copyright 2009 Johannes Berg * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #include -- cgit v1.2.3 From 6d703a81ad5fdd102334751ddacb053ecc6ff046 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Tue, 1 Sep 2009 17:52:57 -0700 Subject: ide: convert to ->proc_fops ->read_proc, ->write_proc are going away, ->proc_fops should be used instead. The only tricky place is IDENTIFY handling: if for some reason taskfile_lib_get_identify() fails, buffer _is_ changed and at least first byte is overwritten. Emulate old behaviour with returning that first byte to userspace and reporting length=1 despite overall -E. Signed-off-by: Alexey Dobriyan Signed-off-by: David S. Miller --- include/linux/ide.h | 24 +++--------------------- 1 file changed, 3 insertions(+), 21 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ide.h b/include/linux/ide.h index 803c1ae31237..e4135d6e0556 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -919,8 +919,7 @@ __IDE_PROC_DEVSET(_name, _min, _max, NULL, NULL) typedef struct { const char *name; mode_t mode; - read_proc_t *read_proc; - write_proc_t *write_proc; + const struct file_operations *proc_fops; } ide_proc_entry_t; void proc_ide_create(void); @@ -932,24 +931,8 @@ void ide_proc_unregister_port(ide_hwif_t *); void ide_proc_register_driver(ide_drive_t *, struct ide_driver *); void ide_proc_unregister_driver(ide_drive_t *, struct ide_driver *); -read_proc_t proc_ide_read_capacity; -read_proc_t proc_ide_read_geometry; - -/* - * Standard exit stuff: - */ -#define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) \ -{ \ - len -= off; \ - if (len < count) { \ - *eof = 1; \ - if (len <= 0) \ - return 0; \ - } else \ - len = count; \ - *start = page + off; \ - return len; \ -} +extern const struct file_operations ide_capacity_proc_fops; +extern const struct file_operations ide_geometry_proc_fops; #else static inline void proc_ide_create(void) { ; } static inline void proc_ide_destroy(void) { ; } @@ -961,7 +944,6 @@ static inline void ide_proc_register_driver(ide_drive_t *drive, struct ide_driver *driver) { ; } static inline void ide_proc_unregister_driver(ide_drive_t *drive, struct ide_driver *driver) { ; } -#define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) return 0; #endif enum { -- cgit v1.2.3 From 69575d388603365f2afbf4166df93152df59b165 Mon Sep 17 00:00:00 2001 From: Shane Wang Date: Tue, 1 Sep 2009 18:25:07 -0700 Subject: x86, intel_txt: clean up the impact on generic code, unbreak non-x86 Move tboot.h from asm to linux to fix the build errors of intel_txt patch on non-X86 platforms. Remove the tboot code from generic code init/main.c and kernel/cpu.c. Signed-off-by: Shane Wang Signed-off-by: H. Peter Anvin --- include/linux/tboot.h | 162 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 162 insertions(+) create mode 100644 include/linux/tboot.h (limited to 'include/linux') diff --git a/include/linux/tboot.h b/include/linux/tboot.h new file mode 100644 index 000000000000..bf2a0c748878 --- /dev/null +++ b/include/linux/tboot.h @@ -0,0 +1,162 @@ +/* + * tboot.h: shared data structure with tboot and kernel and functions + * used by kernel for runtime support of Intel(R) Trusted + * Execution Technology + * + * Copyright (c) 2006-2009, Intel Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + */ + +#ifndef _LINUX_TBOOT_H +#define _LINUX_TBOOT_H + +/* these must have the values from 0-5 in this order */ +enum { + TB_SHUTDOWN_REBOOT = 0, + TB_SHUTDOWN_S5, + TB_SHUTDOWN_S4, + TB_SHUTDOWN_S3, + TB_SHUTDOWN_HALT, + TB_SHUTDOWN_WFS +}; + +#ifdef CONFIG_INTEL_TXT +#include +/* used to communicate between tboot and the launched kernel */ + +#define TB_KEY_SIZE 64 /* 512 bits */ + +#define MAX_TB_MAC_REGIONS 32 + +struct tboot_mac_region { + u64 start; /* must be 64 byte -aligned */ + u32 size; /* must be 64 byte -granular */ +} __packed; + +/* GAS - Generic Address Structure (ACPI 2.0+) */ +struct tboot_acpi_generic_address { + u8 space_id; + u8 bit_width; + u8 bit_offset; + u8 access_width; + u64 address; +} __packed; + +/* + * combines Sx info from FADT and FACS tables per ACPI 2.0+ spec + * (http://www.acpi.info/) + */ +struct tboot_acpi_sleep_info { + struct tboot_acpi_generic_address pm1a_cnt_blk; + struct tboot_acpi_generic_address pm1b_cnt_blk; + struct tboot_acpi_generic_address pm1a_evt_blk; + struct tboot_acpi_generic_address pm1b_evt_blk; + u16 pm1a_cnt_val; + u16 pm1b_cnt_val; + u64 wakeup_vector; + u32 vector_width; + u64 kernel_s3_resume_vector; +} __packed; + +/* + * shared memory page used for communication between tboot and kernel + */ +struct tboot { + /* + * version 3+ fields: + */ + + /* TBOOT_UUID */ + u8 uuid[16]; + + /* version number: 5 is current */ + u32 version; + + /* physical addr of tb_log_t log */ + u32 log_addr; + + /* + * physical addr of entry point for tboot shutdown and + * type of shutdown (TB_SHUTDOWN_*) being requested + */ + u32 shutdown_entry; + u32 shutdown_type; + + /* kernel-specified ACPI info for Sx shutdown */ + struct tboot_acpi_sleep_info acpi_sinfo; + + /* tboot location in memory (physical) */ + u32 tboot_base; + u32 tboot_size; + + /* memory regions (phys addrs) for tboot to MAC on S3 */ + u8 num_mac_regions; + struct tboot_mac_region mac_regions[MAX_TB_MAC_REGIONS]; + + + /* + * version 4+ fields: + */ + + /* symmetric key for use by kernel; will be encrypted on S3 */ + u8 s3_key[TB_KEY_SIZE]; + + + /* + * version 5+ fields: + */ + + /* used to 4byte-align num_in_wfs */ + u8 reserved_align[3]; + + /* number of processors in wait-for-SIPI */ + u32 num_in_wfs; +} __packed; + +/* + * UUID for tboot data struct to facilitate matching + * defined as {663C8DFF-E8B3-4b82-AABF-19EA4D057A08} by tboot, which is + * represented as {} in the char array used here + */ +#define TBOOT_UUID {0xff, 0x8d, 0x3c, 0x66, 0xb3, 0xe8, 0x82, 0x4b, 0xbf,\ + 0xaa, 0x19, 0xea, 0x4d, 0x5, 0x7a, 0x8} + +extern struct tboot *tboot; + +static inline int tboot_enabled(void) +{ + return tboot != NULL; +} + +extern void tboot_probe(void); +extern void tboot_shutdown(u32 shutdown_type); +extern void tboot_sleep(u8 sleep_state, u32 pm1a_control, u32 pm1b_control); +extern struct acpi_table_header *tboot_get_dmar_table( + struct acpi_table_header *dmar_tbl); +extern int tboot_force_iommu(void); + +#else + +#define tboot_probe() do { } while (0) +#define tboot_shutdown(shutdown_type) do { } while (0) +#define tboot_sleep(sleep_state, pm1a_control, pm1b_control) \ + do { } while (0) +#define tboot_get_dmar_table(dmar_tbl) (dmar_tbl) +#define tboot_force_iommu() 0 + +#endif /* !CONFIG_INTEL_TXT */ + +#endif /* _LINUX_TBOOT_H */ -- cgit v1.2.3 From a649637c73a36174287a403cdda7607177d64523 Mon Sep 17 00:00:00 2001 From: Andy Adamson Date: Fri, 28 Aug 2009 08:45:01 -0400 Subject: nfsd41: bound forechannel drc size by memory usage By using the requested ca_maxresponsesize_cached * ca_maxresponses to bound a forechannel drc request size, clients can tailor a session to usage. For example, an I/O session (READ/WRITE only) can have a much smaller ca_maxresponsesize_cached (for only WRITE compound responses) and a lot larger ca_maxresponses to service a large in-flight data window. Signed-off-by: Andy Adamson Signed-off-by: J. Bruce Fields --- include/linux/nfsd/state.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nfsd/state.h b/include/linux/nfsd/state.h index fb0c404c7c5c..ff0b771efde6 100644 --- a/include/linux/nfsd/state.h +++ b/include/linux/nfsd/state.h @@ -92,13 +92,17 @@ struct nfs4_cb_conn { struct rpc_cred * cb_cred; }; -/* Maximum number of slots per session. 128 is useful for long haul TCP */ -#define NFSD_MAX_SLOTS_PER_SESSION 128 +/* Maximum number of slots per session. 160 is useful for long haul TCP */ +#define NFSD_MAX_SLOTS_PER_SESSION 160 /* Maximum number of pages per slot cache entry */ #define NFSD_PAGES_PER_SLOT 1 #define NFSD_SLOT_CACHE_SIZE PAGE_SIZE /* Maximum number of operations per session compound */ #define NFSD_MAX_OPS_PER_COMPOUND 16 +/* Maximum number of NFSD_SLOT_CACHE_SIZE slots per session */ +#define NFSD_CACHE_SIZE_SLOTS_PER_SESSION 32 +#define NFSD_MAX_MEM_PER_SESSION \ + (NFSD_CACHE_SIZE_SLOTS_PER_SESSION * NFSD_SLOT_CACHE_SIZE) struct nfsd4_cache_entry { __be32 ce_status; -- cgit v1.2.3 From 557ce2646e775f6bda734dd92b10d4780874b9c7 Mon Sep 17 00:00:00 2001 From: Andy Adamson Date: Fri, 28 Aug 2009 08:45:04 -0400 Subject: nfsd41: replace page based DRC with buffer based DRC Use NFSD_SLOT_CACHE_SIZE size buffers for sessions DRC instead of holding nfsd pages in cache. Connectathon testing has shown that 1024 bytes for encoded compound operation responses past the sequence operation is sufficient, 512 bytes is a little too small. Set NFSD_SLOT_CACHE_SIZE to 1024. Allocate memory for the session DRC in the CREATE_SESSION operation to guarantee that the memory resource is available for caching responses. Allocate each slot individually in preparation for slot table size negotiation. Remove struct nfsd4_cache_entry and helper functions for the old page-based DRC. The iov_len calculation in nfs4svc_encode_compoundres is now always correct. Replay is now done in nfsd4_sequence under the state lock, so the session ref count is only bumped on non-replay. Clean up the nfs4svc_encode_compoundres session logic. The nfsd4_compound_state statp pointer is also not used. Remove nfsd4_set_statp(). Move useful nfsd4_cache_entry fields into nfsd4_slot. Signed-off-by: Andy Adamson --- include/linux/nfsd/state.h | 27 ++++++++++----------------- include/linux/nfsd/xdr4.h | 5 ++--- 2 files changed, 12 insertions(+), 20 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nfsd/state.h b/include/linux/nfsd/state.h index ff0b771efde6..70ef5f4abbbc 100644 --- a/include/linux/nfsd/state.h +++ b/include/linux/nfsd/state.h @@ -94,30 +94,23 @@ struct nfs4_cb_conn { /* Maximum number of slots per session. 160 is useful for long haul TCP */ #define NFSD_MAX_SLOTS_PER_SESSION 160 -/* Maximum number of pages per slot cache entry */ -#define NFSD_PAGES_PER_SLOT 1 -#define NFSD_SLOT_CACHE_SIZE PAGE_SIZE /* Maximum number of operations per session compound */ #define NFSD_MAX_OPS_PER_COMPOUND 16 +/* Maximum session per slot cache size */ +#define NFSD_SLOT_CACHE_SIZE 1024 /* Maximum number of NFSD_SLOT_CACHE_SIZE slots per session */ #define NFSD_CACHE_SIZE_SLOTS_PER_SESSION 32 #define NFSD_MAX_MEM_PER_SESSION \ (NFSD_CACHE_SIZE_SLOTS_PER_SESSION * NFSD_SLOT_CACHE_SIZE) -struct nfsd4_cache_entry { - __be32 ce_status; - struct kvec ce_datav; /* encoded NFSv4.1 data in rq_res.head[0] */ - struct page *ce_respages[NFSD_PAGES_PER_SLOT + 1]; - int ce_cachethis; - short ce_resused; - int ce_opcnt; - int ce_rpchdrlen; -}; - struct nfsd4_slot { - bool sl_inuse; - u32 sl_seqid; - struct nfsd4_cache_entry sl_cache_entry; + bool sl_inuse; + bool sl_cachethis; + u16 sl_opcnt; + u32 sl_seqid; + __be32 sl_status; + u32 sl_datalen; + char sl_data[]; }; struct nfsd4_channel_attrs { @@ -159,7 +152,7 @@ struct nfsd4_session { struct nfs4_sessionid se_sessionid; struct nfsd4_channel_attrs se_fchannel; struct nfsd4_channel_attrs se_bchannel; - struct nfsd4_slot se_slots[]; /* forward channel slots */ + struct nfsd4_slot *se_slots[]; /* forward channel slots */ }; static inline void diff --git a/include/linux/nfsd/xdr4.h b/include/linux/nfsd/xdr4.h index 3f716607c86d..73164c2b3d29 100644 --- a/include/linux/nfsd/xdr4.h +++ b/include/linux/nfsd/xdr4.h @@ -51,7 +51,7 @@ struct nfsd4_compound_state { /* For sessions DRC */ struct nfsd4_session *session; struct nfsd4_slot *slot; - __be32 *statp; + __be32 *datap; size_t iovlen; u32 minorversion; u32 status; @@ -472,8 +472,7 @@ static inline bool nfsd4_is_solo_sequence(struct nfsd4_compoundres *resp) static inline bool nfsd4_not_cached(struct nfsd4_compoundres *resp) { - return !resp->cstate.slot->sl_cache_entry.ce_cachethis || - nfsd4_is_solo_sequence(resp); + return !resp->cstate.slot->sl_cachethis || nfsd4_is_solo_sequence(resp); } #define NFS4_SVC_XDRSIZE sizeof(struct nfsd4_compoundargs) -- cgit v1.2.3 From cede3930f0ca6fef353fa01306c72a01420bd45e Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 31 Aug 2009 21:34:36 +0000 Subject: powerpc: Fix some late PowerMac G5 with PCIe ATI graphics A misconfiguration by the firmware of the U4 PCIe bridge on PowerMac G5 with the U4 bridge (latest generations, may also affect the iMac G5 "iSight") is causing us to re-assign the PCI BARs of the video card, which can get it out of sync with the firmware, thus breaking offb. This works around it by fixing up the bridge configuration properly at boot time. It also fixes a bug where the firmware provides us with an incorrect set of accessible regions in the device-tree. Signed-off-by: Benjamin Herrenschmidt --- include/linux/pci_ids.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 73b46b6b904f..c86bb6e3dfcc 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -877,6 +877,7 @@ #define PCI_DEVICE_ID_APPLE_SH_SUNGEM 0x0051 #define PCI_DEVICE_ID_APPLE_U3L_AGP 0x0058 #define PCI_DEVICE_ID_APPLE_U3H_AGP 0x0059 +#define PCI_DEVICE_ID_APPLE_U4_PCIE 0x005b #define PCI_DEVICE_ID_APPLE_IPID2_AGP 0x0066 #define PCI_DEVICE_ID_APPLE_IPID2_ATA 0x0069 #define PCI_DEVICE_ID_APPLE_IPID2_FW 0x006a -- cgit v1.2.3 From b2e4b3debc327a5b53d9622e0b1785eea2ea2aad Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 1 Sep 2009 19:25:03 +0000 Subject: tcp: MD5 operations should be const Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- include/linux/tcp.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 8afac76cd748..61723a7c21fe 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -233,7 +233,7 @@ struct tcp_request_sock { struct inet_request_sock req; #ifdef CONFIG_TCP_MD5SIG /* Only used by TCP MD5 Signature so far. */ - struct tcp_request_sock_ops *af_specific; + const struct tcp_request_sock_ops *af_specific; #endif u32 rcv_isn; u32 snt_isn; @@ -401,9 +401,9 @@ struct tcp_sock { #ifdef CONFIG_TCP_MD5SIG /* TCP AF-Specific parts; only used by MD5 Signature support so far */ - struct tcp_sock_af_ops *af_specific; + const struct tcp_sock_af_ops *af_specific; -/* TCP MD5 Signagure Option information */ +/* TCP MD5 Signature Option information */ struct tcp_md5sig_info *md5sig_info; #endif }; -- cgit v1.2.3 From 05c6a8d7a7d778f26d8eb821556988993b766092 Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Wed, 2 Sep 2009 17:02:55 +0000 Subject: net/ethtool: Add support for the ethtool feature to flash firmware image from a specified file. This patch adds support to flash a firmware image to a device using ethtool. The driver gets the filename of the firmware image and flashes the image using the request firmware path. The region "on the chip" to be flashed can be specified by an option. It is upto the device driver to enumerate the region number passed by ethtool, to the region to be flashed. The default behavior is to flash all the regions on the chip. Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- include/linux/ethtool.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index 90c4a3616d94..15e4eb713694 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -362,6 +362,18 @@ struct ethtool_rxnfc { __u32 rule_locs[0]; }; +#define ETHTOOL_FLASH_MAX_FILENAME 128 +enum ethtool_flash_op_type { + ETHTOOL_FLASH_ALL_REGIONS = 0, +}; + +/* for passing firmware flashing related parameters */ +struct ethtool_flash { + __u32 cmd; + __u32 region; + char data[ETHTOOL_FLASH_MAX_FILENAME]; +}; + #ifdef __KERNEL__ struct net_device; @@ -489,6 +501,7 @@ struct ethtool_ops { int (*get_stats_count)(struct net_device *);/* use get_sset_count */ int (*get_rxnfc)(struct net_device *, struct ethtool_rxnfc *, void *); int (*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *); + int (*flash_device)(struct net_device *, struct ethtool_flash *); }; #endif /* __KERNEL__ */ @@ -545,6 +558,7 @@ struct ethtool_ops { #define ETHTOOL_GRXCLSRLALL 0x00000030 /* Get all RX classification rule */ #define ETHTOOL_SRXCLSRLDEL 0x00000031 /* Delete RX classification rule */ #define ETHTOOL_SRXCLSRLINS 0x00000032 /* Insert RX classification rule */ +#define ETHTOOL_FLASHDEV 0x00000033 /* Flash firmware to device */ /* compatibility with older code */ #define SPARC_ETH_GSET ETHTOOL_GSET -- cgit v1.2.3 From 53f824520b6d84ca5b4a8fd71addc91dbf64357e Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Thu, 3 Sep 2009 14:31:44 -0700 Subject: x86/i386: Put aligned stack-canary in percpu shared_aligned section Pack aligned things together into a special section to minimize padding holes. Suggested-by: Eric Dumazet Signed-off-by: Jeremy Fitzhardinge Cc: Tejun Heo LKML-Reference: <4AA035C0.9070202@goop.org> [ queued up in tip:x86/asm because it depends on this commit: x86/i386: Make sure stack-protector segment base is cache aligned ] Signed-off-by: Ingo Molnar --- include/linux/percpu-defs.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/percpu-defs.h b/include/linux/percpu-defs.h index 68438e18fff4..3058cf9dd3d4 100644 --- a/include/linux/percpu-defs.h +++ b/include/linux/percpu-defs.h @@ -66,6 +66,14 @@ DEFINE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \ ____cacheline_aligned_in_smp +#define DECLARE_PER_CPU_ALIGNED(type, name) \ + DECLARE_PER_CPU_SECTION(type, name, PER_CPU_ALIGNED_SECTION) \ + ____cacheline_aligned + +#define DEFINE_PER_CPU_ALIGNED(type, name) \ + DEFINE_PER_CPU_SECTION(type, name, PER_CPU_ALIGNED_SECTION) \ + ____cacheline_aligned + /* * Declaration/definition used for per-CPU variables that must be page aligned. */ -- cgit v1.2.3 From 652696efce135559b98ee5a3d7899295e8d553fa Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Wed, 24 Jun 2009 12:03:51 +0900 Subject: mtd: OneNAND: 4-bit ECC status macros Define ECC status for 4-bit ECC status Signed-off-by: Kyungmin Park Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- include/linux/mtd/onenand_regs.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mtd/onenand_regs.h b/include/linux/mtd/onenand_regs.h index 86a6bbef6465..acadbf53a69f 100644 --- a/include/linux/mtd/onenand_regs.h +++ b/include/linux/mtd/onenand_regs.h @@ -207,6 +207,9 @@ #define ONENAND_ECC_2BIT (1 << 1) #define ONENAND_ECC_2BIT_ALL (0xAAAA) #define FLEXONENAND_UNCORRECTABLE_ERROR (0x1010) +#define ONENAND_ECC_3BIT (1 << 2) +#define ONENAND_ECC_4BIT (1 << 3) +#define ONENAND_ECC_4BIT_UNCORRECTABLE (0x1010) /* * One-Time Programmable (OTP) -- cgit v1.2.3 From 39e3ab6fded4d7e66e01a878f0cae23ddd480c3b Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Tue, 1 Sep 2009 05:26:12 +0000 Subject: can: add can_free_echo_skb() for upcoming drivers This patch adds the function can_free_echo_skb to the CAN device interface to allow upcoming drivers to release echo skb's in case of error. Signed-off-by: Wolfgang Grandegger Signed-off-by: David S. Miller --- include/linux/can/dev.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h index 4a37a56f6cdd..5824b20b5fcb 100644 --- a/include/linux/can/dev.h +++ b/include/linux/can/dev.h @@ -66,5 +66,6 @@ void can_bus_off(struct net_device *dev); void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev, int idx); void can_get_echo_skb(struct net_device *dev, int idx); +void can_free_echo_skb(struct net_device *dev, int idx); #endif /* CAN_DEV_H */ -- cgit v1.2.3 From b8bdc1d0cfc488ac0d94724639f9a61b0a5a1d40 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 31 Aug 2009 06:20:12 +0200 Subject: wm97xx_battery: Use platform_data This patch converts the wm97xx-battery driver to use platform_data supplied by ac97 bus. Signed-off-by: Marek Vasut Signed-off-by: Anton Vorontsov --- include/linux/wm97xx.h | 18 ++++++++++++++++++ include/linux/wm97xx_batt.h | 18 ++++-------------- 2 files changed, 22 insertions(+), 14 deletions(-) (limited to 'include/linux') diff --git a/include/linux/wm97xx.h b/include/linux/wm97xx.h index 6f69968eab24..b2c2297844e3 100644 --- a/include/linux/wm97xx.h +++ b/include/linux/wm97xx.h @@ -286,6 +286,24 @@ struct wm97xx { u16 suspend_mode; /* PRP in suspend mode */ }; +struct wm97xx_batt_pdata { + int batt_aux; + int temp_aux; + int charge_gpio; + int min_voltage; + int max_voltage; + int batt_div; + int batt_mult; + int temp_div; + int temp_mult; + int batt_tech; + char *batt_name; +}; + +struct wm97xx_pdata { + struct wm97xx_batt_pdata *batt_pdata; /* battery data */ +}; + /* * Codec GPIO access (not supported on WM9705) * This can be used to set/get codec GPIO and Virtual GPIO status. diff --git a/include/linux/wm97xx_batt.h b/include/linux/wm97xx_batt.h index 9681d1ab0e4f..a1d6419c2ff8 100644 --- a/include/linux/wm97xx_batt.h +++ b/include/linux/wm97xx_batt.h @@ -3,22 +3,12 @@ #include -struct wm97xx_batt_info { - int batt_aux; - int temp_aux; - int charge_gpio; - int min_voltage; - int max_voltage; - int batt_div; - int batt_mult; - int temp_div; - int temp_mult; - int batt_tech; - char *batt_name; -}; +#warning This file will be removed soon, use wm97xx.h instead! + +#define wm97xx_batt_info wm97xx_batt_pdata #ifdef CONFIG_BATTERY_WM97XX -void __init wm97xx_bat_set_pdata(struct wm97xx_batt_info *data); +void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data); #else static inline void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data) {} #endif -- cgit v1.2.3 From 3961f7c3cf247eee5df7fabadc7a40f2deeb98f3 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 10 Aug 2009 17:43:53 +0100 Subject: power_supply: Add driver for the PMU on WM831x PMICs The WM831x PMICs provide power path management from three sources: a wall supply, USB and a battery with integrated charger. They also provide an additional backup supply with integrated for maintaining always on functionality such as the RTC and monitoring of power switches. After some initial configuration at startup the device operates autonomously, the driver simply provides reporting of the current state. Signed-off-by: Mark Brown Signed-off-by: Anton Vorontsov --- include/linux/mfd/wm831x/pmu.h | 189 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 189 insertions(+) create mode 100644 include/linux/mfd/wm831x/pmu.h (limited to 'include/linux') diff --git a/include/linux/mfd/wm831x/pmu.h b/include/linux/mfd/wm831x/pmu.h new file mode 100644 index 000000000000..b18cbb027bc3 --- /dev/null +++ b/include/linux/mfd/wm831x/pmu.h @@ -0,0 +1,189 @@ +/* + * include/linux/mfd/wm831x/pmu.h -- PMU for WM831x + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MFD_WM831X_PMU_H__ +#define __MFD_WM831X_PMU_H__ + +/* + * R16387 (0x4003) - Power State + */ +#define WM831X_CHIP_ON 0x8000 /* CHIP_ON */ +#define WM831X_CHIP_ON_MASK 0x8000 /* CHIP_ON */ +#define WM831X_CHIP_ON_SHIFT 15 /* CHIP_ON */ +#define WM831X_CHIP_ON_WIDTH 1 /* CHIP_ON */ +#define WM831X_CHIP_SLP 0x4000 /* CHIP_SLP */ +#define WM831X_CHIP_SLP_MASK 0x4000 /* CHIP_SLP */ +#define WM831X_CHIP_SLP_SHIFT 14 /* CHIP_SLP */ +#define WM831X_CHIP_SLP_WIDTH 1 /* CHIP_SLP */ +#define WM831X_REF_LP 0x1000 /* REF_LP */ +#define WM831X_REF_LP_MASK 0x1000 /* REF_LP */ +#define WM831X_REF_LP_SHIFT 12 /* REF_LP */ +#define WM831X_REF_LP_WIDTH 1 /* REF_LP */ +#define WM831X_PWRSTATE_DLY_MASK 0x0C00 /* PWRSTATE_DLY - [11:10] */ +#define WM831X_PWRSTATE_DLY_SHIFT 10 /* PWRSTATE_DLY - [11:10] */ +#define WM831X_PWRSTATE_DLY_WIDTH 2 /* PWRSTATE_DLY - [11:10] */ +#define WM831X_SWRST_DLY 0x0200 /* SWRST_DLY */ +#define WM831X_SWRST_DLY_MASK 0x0200 /* SWRST_DLY */ +#define WM831X_SWRST_DLY_SHIFT 9 /* SWRST_DLY */ +#define WM831X_SWRST_DLY_WIDTH 1 /* SWRST_DLY */ +#define WM831X_USB100MA_STARTUP_MASK 0x0030 /* USB100MA_STARTUP - [5:4] */ +#define WM831X_USB100MA_STARTUP_SHIFT 4 /* USB100MA_STARTUP - [5:4] */ +#define WM831X_USB100MA_STARTUP_WIDTH 2 /* USB100MA_STARTUP - [5:4] */ +#define WM831X_USB_CURR_STS 0x0008 /* USB_CURR_STS */ +#define WM831X_USB_CURR_STS_MASK 0x0008 /* USB_CURR_STS */ +#define WM831X_USB_CURR_STS_SHIFT 3 /* USB_CURR_STS */ +#define WM831X_USB_CURR_STS_WIDTH 1 /* USB_CURR_STS */ +#define WM831X_USB_ILIM_MASK 0x0007 /* USB_ILIM - [2:0] */ +#define WM831X_USB_ILIM_SHIFT 0 /* USB_ILIM - [2:0] */ +#define WM831X_USB_ILIM_WIDTH 3 /* USB_ILIM - [2:0] */ + +/* + * R16397 (0x400D) - System Status + */ +#define WM831X_THW_STS 0x8000 /* THW_STS */ +#define WM831X_THW_STS_MASK 0x8000 /* THW_STS */ +#define WM831X_THW_STS_SHIFT 15 /* THW_STS */ +#define WM831X_THW_STS_WIDTH 1 /* THW_STS */ +#define WM831X_PWR_SRC_BATT 0x0400 /* PWR_SRC_BATT */ +#define WM831X_PWR_SRC_BATT_MASK 0x0400 /* PWR_SRC_BATT */ +#define WM831X_PWR_SRC_BATT_SHIFT 10 /* PWR_SRC_BATT */ +#define WM831X_PWR_SRC_BATT_WIDTH 1 /* PWR_SRC_BATT */ +#define WM831X_PWR_WALL 0x0200 /* PWR_WALL */ +#define WM831X_PWR_WALL_MASK 0x0200 /* PWR_WALL */ +#define WM831X_PWR_WALL_SHIFT 9 /* PWR_WALL */ +#define WM831X_PWR_WALL_WIDTH 1 /* PWR_WALL */ +#define WM831X_PWR_USB 0x0100 /* PWR_USB */ +#define WM831X_PWR_USB_MASK 0x0100 /* PWR_USB */ +#define WM831X_PWR_USB_SHIFT 8 /* PWR_USB */ +#define WM831X_PWR_USB_WIDTH 1 /* PWR_USB */ +#define WM831X_MAIN_STATE_MASK 0x001F /* MAIN_STATE - [4:0] */ +#define WM831X_MAIN_STATE_SHIFT 0 /* MAIN_STATE - [4:0] */ +#define WM831X_MAIN_STATE_WIDTH 5 /* MAIN_STATE - [4:0] */ + +/* + * R16456 (0x4048) - Charger Control 1 + */ +#define WM831X_CHG_ENA 0x8000 /* CHG_ENA */ +#define WM831X_CHG_ENA_MASK 0x8000 /* CHG_ENA */ +#define WM831X_CHG_ENA_SHIFT 15 /* CHG_ENA */ +#define WM831X_CHG_ENA_WIDTH 1 /* CHG_ENA */ +#define WM831X_CHG_FRC 0x4000 /* CHG_FRC */ +#define WM831X_CHG_FRC_MASK 0x4000 /* CHG_FRC */ +#define WM831X_CHG_FRC_SHIFT 14 /* CHG_FRC */ +#define WM831X_CHG_FRC_WIDTH 1 /* CHG_FRC */ +#define WM831X_CHG_ITERM_MASK 0x1C00 /* CHG_ITERM - [12:10] */ +#define WM831X_CHG_ITERM_SHIFT 10 /* CHG_ITERM - [12:10] */ +#define WM831X_CHG_ITERM_WIDTH 3 /* CHG_ITERM - [12:10] */ +#define WM831X_CHG_FAST 0x0020 /* CHG_FAST */ +#define WM831X_CHG_FAST_MASK 0x0020 /* CHG_FAST */ +#define WM831X_CHG_FAST_SHIFT 5 /* CHG_FAST */ +#define WM831X_CHG_FAST_WIDTH 1 /* CHG_FAST */ +#define WM831X_CHG_IMON_ENA 0x0002 /* CHG_IMON_ENA */ +#define WM831X_CHG_IMON_ENA_MASK 0x0002 /* CHG_IMON_ENA */ +#define WM831X_CHG_IMON_ENA_SHIFT 1 /* CHG_IMON_ENA */ +#define WM831X_CHG_IMON_ENA_WIDTH 1 /* CHG_IMON_ENA */ +#define WM831X_CHG_CHIP_TEMP_MON 0x0001 /* CHG_CHIP_TEMP_MON */ +#define WM831X_CHG_CHIP_TEMP_MON_MASK 0x0001 /* CHG_CHIP_TEMP_MON */ +#define WM831X_CHG_CHIP_TEMP_MON_SHIFT 0 /* CHG_CHIP_TEMP_MON */ +#define WM831X_CHG_CHIP_TEMP_MON_WIDTH 1 /* CHG_CHIP_TEMP_MON */ + +/* + * R16457 (0x4049) - Charger Control 2 + */ +#define WM831X_CHG_OFF_MSK 0x4000 /* CHG_OFF_MSK */ +#define WM831X_CHG_OFF_MSK_MASK 0x4000 /* CHG_OFF_MSK */ +#define WM831X_CHG_OFF_MSK_SHIFT 14 /* CHG_OFF_MSK */ +#define WM831X_CHG_OFF_MSK_WIDTH 1 /* CHG_OFF_MSK */ +#define WM831X_CHG_TIME_MASK 0x0F00 /* CHG_TIME - [11:8] */ +#define WM831X_CHG_TIME_SHIFT 8 /* CHG_TIME - [11:8] */ +#define WM831X_CHG_TIME_WIDTH 4 /* CHG_TIME - [11:8] */ +#define WM831X_CHG_TRKL_ILIM_MASK 0x00C0 /* CHG_TRKL_ILIM - [7:6] */ +#define WM831X_CHG_TRKL_ILIM_SHIFT 6 /* CHG_TRKL_ILIM - [7:6] */ +#define WM831X_CHG_TRKL_ILIM_WIDTH 2 /* CHG_TRKL_ILIM - [7:6] */ +#define WM831X_CHG_VSEL_MASK 0x0030 /* CHG_VSEL - [5:4] */ +#define WM831X_CHG_VSEL_SHIFT 4 /* CHG_VSEL - [5:4] */ +#define WM831X_CHG_VSEL_WIDTH 2 /* CHG_VSEL - [5:4] */ +#define WM831X_CHG_FAST_ILIM_MASK 0x000F /* CHG_FAST_ILIM - [3:0] */ +#define WM831X_CHG_FAST_ILIM_SHIFT 0 /* CHG_FAST_ILIM - [3:0] */ +#define WM831X_CHG_FAST_ILIM_WIDTH 4 /* CHG_FAST_ILIM - [3:0] */ + +/* + * R16458 (0x404A) - Charger Status + */ +#define WM831X_BATT_OV_STS 0x8000 /* BATT_OV_STS */ +#define WM831X_BATT_OV_STS_MASK 0x8000 /* BATT_OV_STS */ +#define WM831X_BATT_OV_STS_SHIFT 15 /* BATT_OV_STS */ +#define WM831X_BATT_OV_STS_WIDTH 1 /* BATT_OV_STS */ +#define WM831X_CHG_STATE_MASK 0x7000 /* CHG_STATE - [14:12] */ +#define WM831X_CHG_STATE_SHIFT 12 /* CHG_STATE - [14:12] */ +#define WM831X_CHG_STATE_WIDTH 3 /* CHG_STATE - [14:12] */ +#define WM831X_BATT_HOT_STS 0x0800 /* BATT_HOT_STS */ +#define WM831X_BATT_HOT_STS_MASK 0x0800 /* BATT_HOT_STS */ +#define WM831X_BATT_HOT_STS_SHIFT 11 /* BATT_HOT_STS */ +#define WM831X_BATT_HOT_STS_WIDTH 1 /* BATT_HOT_STS */ +#define WM831X_BATT_COLD_STS 0x0400 /* BATT_COLD_STS */ +#define WM831X_BATT_COLD_STS_MASK 0x0400 /* BATT_COLD_STS */ +#define WM831X_BATT_COLD_STS_SHIFT 10 /* BATT_COLD_STS */ +#define WM831X_BATT_COLD_STS_WIDTH 1 /* BATT_COLD_STS */ +#define WM831X_CHG_TOPOFF 0x0200 /* CHG_TOPOFF */ +#define WM831X_CHG_TOPOFF_MASK 0x0200 /* CHG_TOPOFF */ +#define WM831X_CHG_TOPOFF_SHIFT 9 /* CHG_TOPOFF */ +#define WM831X_CHG_TOPOFF_WIDTH 1 /* CHG_TOPOFF */ +#define WM831X_CHG_ACTIVE 0x0100 /* CHG_ACTIVE */ +#define WM831X_CHG_ACTIVE_MASK 0x0100 /* CHG_ACTIVE */ +#define WM831X_CHG_ACTIVE_SHIFT 8 /* CHG_ACTIVE */ +#define WM831X_CHG_ACTIVE_WIDTH 1 /* CHG_ACTIVE */ +#define WM831X_CHG_TIME_ELAPSED_MASK 0x00FF /* CHG_TIME_ELAPSED - [7:0] */ +#define WM831X_CHG_TIME_ELAPSED_SHIFT 0 /* CHG_TIME_ELAPSED - [7:0] */ +#define WM831X_CHG_TIME_ELAPSED_WIDTH 8 /* CHG_TIME_ELAPSED - [7:0] */ + +#define WM831X_CHG_STATE_OFF (0 << WM831X_CHG_STATE_SHIFT) +#define WM831X_CHG_STATE_TRICKLE (1 << WM831X_CHG_STATE_SHIFT) +#define WM831X_CHG_STATE_FAST (2 << WM831X_CHG_STATE_SHIFT) +#define WM831X_CHG_STATE_TRICKLE_OT (3 << WM831X_CHG_STATE_SHIFT) +#define WM831X_CHG_STATE_FAST_OT (4 << WM831X_CHG_STATE_SHIFT) +#define WM831X_CHG_STATE_DEFECTIVE (5 << WM831X_CHG_STATE_SHIFT) + +/* + * R16459 (0x404B) - Backup Charger Control + */ +#define WM831X_BKUP_CHG_ENA 0x8000 /* BKUP_CHG_ENA */ +#define WM831X_BKUP_CHG_ENA_MASK 0x8000 /* BKUP_CHG_ENA */ +#define WM831X_BKUP_CHG_ENA_SHIFT 15 /* BKUP_CHG_ENA */ +#define WM831X_BKUP_CHG_ENA_WIDTH 1 /* BKUP_CHG_ENA */ +#define WM831X_BKUP_CHG_STS 0x4000 /* BKUP_CHG_STS */ +#define WM831X_BKUP_CHG_STS_MASK 0x4000 /* BKUP_CHG_STS */ +#define WM831X_BKUP_CHG_STS_SHIFT 14 /* BKUP_CHG_STS */ +#define WM831X_BKUP_CHG_STS_WIDTH 1 /* BKUP_CHG_STS */ +#define WM831X_BKUP_CHG_MODE 0x1000 /* BKUP_CHG_MODE */ +#define WM831X_BKUP_CHG_MODE_MASK 0x1000 /* BKUP_CHG_MODE */ +#define WM831X_BKUP_CHG_MODE_SHIFT 12 /* BKUP_CHG_MODE */ +#define WM831X_BKUP_CHG_MODE_WIDTH 1 /* BKUP_CHG_MODE */ +#define WM831X_BKUP_BATT_DET_ENA 0x0800 /* BKUP_BATT_DET_ENA */ +#define WM831X_BKUP_BATT_DET_ENA_MASK 0x0800 /* BKUP_BATT_DET_ENA */ +#define WM831X_BKUP_BATT_DET_ENA_SHIFT 11 /* BKUP_BATT_DET_ENA */ +#define WM831X_BKUP_BATT_DET_ENA_WIDTH 1 /* BKUP_BATT_DET_ENA */ +#define WM831X_BKUP_BATT_STS 0x0400 /* BKUP_BATT_STS */ +#define WM831X_BKUP_BATT_STS_MASK 0x0400 /* BKUP_BATT_STS */ +#define WM831X_BKUP_BATT_STS_SHIFT 10 /* BKUP_BATT_STS */ +#define WM831X_BKUP_BATT_STS_WIDTH 1 /* BKUP_BATT_STS */ +#define WM831X_BKUP_CHG_VLIM 0x0010 /* BKUP_CHG_VLIM */ +#define WM831X_BKUP_CHG_VLIM_MASK 0x0010 /* BKUP_CHG_VLIM */ +#define WM831X_BKUP_CHG_VLIM_SHIFT 4 /* BKUP_CHG_VLIM */ +#define WM831X_BKUP_CHG_VLIM_WIDTH 1 /* BKUP_CHG_VLIM */ +#define WM831X_BKUP_CHG_ILIM_MASK 0x0003 /* BKUP_CHG_ILIM - [1:0] */ +#define WM831X_BKUP_CHG_ILIM_SHIFT 0 /* BKUP_CHG_ILIM - [1:0] */ +#define WM831X_BKUP_CHG_ILIM_WIDTH 2 /* BKUP_CHG_ILIM - [1:0] */ + +#endif -- cgit v1.2.3 From af356afa010f3cd2c8b8fcc3bce90f7a7b7ec02a Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Fri, 4 Sep 2009 06:41:18 +0000 Subject: net_sched: reintroduce dev->qdisc for use by sch_api Currently the multiqueue integration with the qdisc API suffers from a few problems: - with multiple queues, all root qdiscs use the same handle. This means they can't be exposed to userspace in a backwards compatible fashion. - all API operations always refer to queue number 0. Newly created qdiscs are automatically shared between all queues, its not possible to address individual queues or restore multiqueue behaviour once a shared qdisc has been attached. - Dumps only contain the root qdisc of queue 0, in case of non-shared qdiscs this means the statistics are incomplete. This patch reintroduces dev->qdisc, which points to the (single) root qdisc from userspace's point of view. Currently it either points to the first (non-shared) default qdisc, or a qdisc shared between all queues. The following patches will introduce a classful dummy qdisc, which will be used as root qdisc and contain the per-queue qdiscs as children. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/linux/netdevice.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 121cbad0aae5..a44118b1b56c 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -832,6 +832,9 @@ struct net_device /* Number of TX queues currently active in device */ unsigned int real_num_tx_queues; + /* root qdisc from userspace point of view */ + struct Qdisc *qdisc; + unsigned long tx_queue_len; /* Max frames per queue allowed */ spinlock_t tx_global_lock; /* -- cgit v1.2.3 From 384824281caa9ac4b76664033416f1eac4a652fe Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 4 Sep 2009 05:33:46 +0000 Subject: wan: dlci/sdla transmit return dehacking This is a brute force removal of the wierd slave interface done for DLCI -> SDLA transmit. Before it was using non-standard return values and freeing skb in caller. This changes it to using normal return values, and freeing in the callee. Luckly only one driver pair was doing this. Not tested on real hardware, in fact I wonder if this driver pair is even being used by any users. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- include/linux/if_frad.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/if_frad.h b/include/linux/if_frad.h index 673f2209453d..80b3a1056a5f 100644 --- a/include/linux/if_frad.h +++ b/include/linux/if_frad.h @@ -69,11 +69,6 @@ struct dlci_conf { #define DLCI_VALID_FLAGS 0x000B -/* FRAD driver uses these to indicate what it did with packet */ -#define DLCI_RET_OK 0x00 -#define DLCI_RET_ERR 0x01 -#define DLCI_RET_DROP 0x02 - /* defines for the actual Frame Relay hardware */ #define FRAD_GET_CONF (SIOCDEVPRIVATE) #define FRAD_SET_CONF (SIOCDEVPRIVATE + 1) -- cgit v1.2.3 From c746b5519a88b8803d43946ad06326ece4829116 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 5 Sep 2009 14:09:21 +0100 Subject: leds: Add WM831x status LED driver The WM831x devices feature two software controlled status LEDs with hardware assisted blinking. The device can also autonomously control the LEDs based on a selection of sources. This can be configured at boot time using either platform data or the chip OTP. A sysfs file in the style of that for triggers allowing the control source to be configured at run time. Triggers can't be used here since they can't depend on the implementation details of a specific LED type. Signed-off-by: Mark Brown Signed-off-by: Richard Purdie --- include/linux/mfd/wm831x/status.h | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 include/linux/mfd/wm831x/status.h (limited to 'include/linux') diff --git a/include/linux/mfd/wm831x/status.h b/include/linux/mfd/wm831x/status.h new file mode 100644 index 000000000000..6bc090d0e3ac --- /dev/null +++ b/include/linux/mfd/wm831x/status.h @@ -0,0 +1,34 @@ +/* + * include/linux/mfd/wm831x/status.h -- Status LEDs for WM831x + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MFD_WM831X_STATUS_H__ +#define __MFD_WM831X_STATUS_H__ + +#define WM831X_LED_SRC_MASK 0xC000 /* LED_SRC - [15:14] */ +#define WM831X_LED_SRC_SHIFT 14 /* LED_SRC - [15:14] */ +#define WM831X_LED_SRC_WIDTH 2 /* LED_SRC - [15:14] */ +#define WM831X_LED_MODE_MASK 0x0300 /* LED_MODE - [9:8] */ +#define WM831X_LED_MODE_SHIFT 8 /* LED_MODE - [9:8] */ +#define WM831X_LED_MODE_WIDTH 2 /* LED_MODE - [9:8] */ +#define WM831X_LED_SEQ_LEN_MASK 0x0030 /* LED_SEQ_LEN - [5:4] */ +#define WM831X_LED_SEQ_LEN_SHIFT 4 /* LED_SEQ_LEN - [5:4] */ +#define WM831X_LED_SEQ_LEN_WIDTH 2 /* LED_SEQ_LEN - [5:4] */ +#define WM831X_LED_DUR_MASK 0x000C /* LED_DUR - [3:2] */ +#define WM831X_LED_DUR_SHIFT 2 /* LED_DUR - [3:2] */ +#define WM831X_LED_DUR_WIDTH 2 /* LED_DUR - [3:2] */ +#define WM831X_LED_DUTY_CYC_MASK 0x0003 /* LED_DUTY_CYC - [1:0] */ +#define WM831X_LED_DUTY_CYC_SHIFT 0 /* LED_DUTY_CYC - [1:0] */ +#define WM831X_LED_DUTY_CYC_WIDTH 2 /* LED_DUTY_CYC - [1:0] */ + +#endif -- cgit v1.2.3 From 5036cc41e07d6614350e329666ee8a79cea6f793 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 6 Aug 2009 16:07:10 -0700 Subject: backlight: spi driver for LMS283GF05 LCD ADd support for the SPI part of LMS283GF05 LCD. The LCD uses SPI for initialization and powerdown sequences. No further defails are specified in the datasheet about the initialization/powerdown sequence, just the magic numbers that have to be sent over SPI bus. This LCD can be found in the Aeronix Zipit Z2 handheld. Signed-off-by: Marek Vasut Signed-off-by: Andrew Morton Signed-off-by: Richard Purdie --- include/linux/spi/lms283gf05.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 include/linux/spi/lms283gf05.h (limited to 'include/linux') diff --git a/include/linux/spi/lms283gf05.h b/include/linux/spi/lms283gf05.h new file mode 100644 index 000000000000..555d254e6606 --- /dev/null +++ b/include/linux/spi/lms283gf05.h @@ -0,0 +1,28 @@ +/* + * lms283gf05.h - Platform glue for Samsung LMS283GF05 LCD + * + * Copyright (C) 2009 Marek Vasut + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#ifndef _INCLUDE_LINUX_SPI_LMS283GF05_H_ +#define _INCLUDE_LINUX_SPI_LMS283GF05_H_ + +struct lms283gf05_pdata { + unsigned long reset_gpio; + bool reset_inverted; +}; + +#endif /* _INCLUDE_LINUX_SPI_LMS283GF05_H_ */ -- cgit v1.2.3 From 0403e3827788d878163f9ef0541b748b0f88ca5d Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 8 Sep 2009 17:42:50 -0700 Subject: dmaengine: add fence support Some engines optimize operation by reading ahead in the descriptor chain such that descriptor2 may start execution before descriptor1 completes. If descriptor2 depends on the result from descriptor1 then a fence is required (on descriptor2) to disable this optimization. The async_tx api could implicitly identify dependencies via the 'depend_tx' parameter, but that would constrain cases where the dependency chain only specifies a completion order rather than a data dependency. So, provide an ASYNC_TX_FENCE to explicitly identify data dependencies. Signed-off-by: Dan Williams --- include/linux/async_tx.h | 3 +++ include/linux/dmaengine.h | 3 +++ 2 files changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/async_tx.h b/include/linux/async_tx.h index 866e61c4e2e0..a1c486a88e88 100644 --- a/include/linux/async_tx.h +++ b/include/linux/async_tx.h @@ -58,11 +58,14 @@ struct dma_chan_ref { * array. * @ASYNC_TX_ACK: immediately ack the descriptor, precludes setting up a * dependency chain + * @ASYNC_TX_FENCE: specify that the next operation in the dependency + * chain uses this operation's result as an input */ enum async_tx_flags { ASYNC_TX_XOR_ZERO_DST = (1 << 0), ASYNC_TX_XOR_DROP_DST = (1 << 1), ASYNC_TX_ACK = (1 << 2), + ASYNC_TX_FENCE = (1 << 3), }; /** diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 1012f1abcb54..4d6c1c925fd4 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -87,6 +87,8 @@ enum dma_transaction_type { * @DMA_PREP_CONTINUE - indicate to a driver that it is reusing buffers as * sources that were the result of a previous operation, in the case of a PQ * operation it continues the calculation with new sources + * @DMA_PREP_FENCE - tell the driver that subsequent operations depend + * on the result of this operation */ enum dma_ctrl_flags { DMA_PREP_INTERRUPT = (1 << 0), @@ -98,6 +100,7 @@ enum dma_ctrl_flags { DMA_PREP_PQ_DISABLE_P = (1 << 6), DMA_PREP_PQ_DISABLE_Q = (1 << 7), DMA_PREP_CONTINUE = (1 << 8), + DMA_PREP_FENCE = (1 << 9), }; /** -- cgit v1.2.3 From 138f4c359d23d2ec38d18bd70dd9613ae515fe93 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 8 Sep 2009 17:42:51 -0700 Subject: dmaengine, async_tx: add a "no channel switch" allocator Channel switching is problematic for some dmaengine drivers as the architecture precludes separating the ->prep from ->submit. In these cases the driver can select ASYNC_TX_DISABLE_CHANNEL_SWITCH to modify the async_tx allocator to only return channels that support all of the required asynchronous operations. For example MD_RAID456=y selects support for asynchronous xor, xor validate, pq, pq validate, and memcpy. When ASYNC_TX_DISABLE_CHANNEL_SWITCH=y any channel with all these capabilities is marked DMA_ASYNC_TX allowing async_tx_find_channel() to quickly locate compatible channels with the guarantee that dependency chains will remain on one channel. When ASYNC_TX_DISABLE_CHANNEL_SWITCH=n async_tx_find_channel() may select channels that lead to operation chains that need to cross channel boundaries using the async_tx channel switch capability. Signed-off-by: Dan Williams --- include/linux/dmaengine.h | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 4d6c1c925fd4..86853ed7970b 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -48,6 +48,9 @@ enum dma_status { /** * enum dma_transaction_type - DMA transaction types/indexes + * + * Note: The DMA_ASYNC_TX capability is not to be set by drivers. It is + * automatically set as dma devices are registered. */ enum dma_transaction_type { DMA_MEMCPY, @@ -61,6 +64,7 @@ enum dma_transaction_type { DMA_MEMCPY_CRC32C, DMA_INTERRUPT, DMA_PRIVATE, + DMA_ASYNC_TX, DMA_SLAVE, }; @@ -396,7 +400,11 @@ static inline void net_dmaengine_put(void) #ifdef CONFIG_ASYNC_TX_DMA #define async_dmaengine_get() dmaengine_get() #define async_dmaengine_put() dmaengine_put() +#ifdef CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH +#define async_dma_find_channel(type) dma_find_channel(DMA_ASYNC_TX) +#else #define async_dma_find_channel(type) dma_find_channel(type) +#endif /* CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH */ #else static inline void async_dmaengine_get(void) { @@ -409,7 +417,7 @@ async_dma_find_channel(enum dma_transaction_type type) { return NULL; } -#endif +#endif /* CONFIG_ASYNC_TX_DMA */ dma_cookie_t dma_async_memcpy_buf_to_buf(struct dma_chan *chan, void *dest, void *src, size_t len); -- cgit v1.2.3 From 9308add6ea4fedeba37b0d7c4630a542bd34f214 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 8 Sep 2009 17:42:52 -0700 Subject: dmaengine: cleanup unused transaction types No drivers currently implement these operation types, so they can be deleted. Signed-off-by: Dan Williams --- include/linux/dmaengine.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 86853ed7970b..db23fd583f98 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -56,12 +56,9 @@ enum dma_transaction_type { DMA_MEMCPY, DMA_XOR, DMA_PQ, - DMA_DUAL_XOR, - DMA_PQ_UPDATE, DMA_XOR_VAL, DMA_PQ_VAL, DMA_MEMSET, - DMA_MEMCPY_CRC32C, DMA_INTERRUPT, DMA_PRIVATE, DMA_ASYNC_TX, -- cgit v1.2.3 From 83544ae9f3991bfc7d5e0fe9a3008cd05a8d57b7 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 8 Sep 2009 17:42:53 -0700 Subject: dmaengine, async_tx: support alignment checks Some engines have transfer size and address alignment restrictions. Add a per-operation alignment property to struct dma_device that the async routines and dmatest can use to check alignment capabilities. Signed-off-by: Dan Williams --- include/linux/dmaengine.h | 44 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) (limited to 'include/linux') diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index db23fd583f98..835b9c7bf1c2 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -245,6 +245,10 @@ struct dma_async_tx_descriptor { * @cap_mask: one or more dma_capability flags * @max_xor: maximum number of xor sources, 0 if no capability * @max_pq: maximum number of PQ sources and PQ-continue capability + * @copy_align: alignment shift for memcpy operations + * @xor_align: alignment shift for xor operations + * @pq_align: alignment shift for pq operations + * @fill_align: alignment shift for memset operations * @dev_id: unique device ID * @dev: struct device reference for dma mapping api * @device_alloc_chan_resources: allocate resources and return the @@ -271,6 +275,10 @@ struct dma_device { dma_cap_mask_t cap_mask; unsigned short max_xor; unsigned short max_pq; + u8 copy_align; + u8 xor_align; + u8 pq_align; + u8 fill_align; #define DMA_HAS_PQ_CONTINUE (1 << 15) int dev_id; @@ -314,6 +322,42 @@ struct dma_device { void (*device_issue_pending)(struct dma_chan *chan); }; +static inline bool dmaengine_check_align(u8 align, size_t off1, size_t off2, size_t len) +{ + size_t mask; + + if (!align) + return true; + mask = (1 << align) - 1; + if (mask & (off1 | off2 | len)) + return false; + return true; +} + +static inline bool is_dma_copy_aligned(struct dma_device *dev, size_t off1, + size_t off2, size_t len) +{ + return dmaengine_check_align(dev->copy_align, off1, off2, len); +} + +static inline bool is_dma_xor_aligned(struct dma_device *dev, size_t off1, + size_t off2, size_t len) +{ + return dmaengine_check_align(dev->xor_align, off1, off2, len); +} + +static inline bool is_dma_pq_aligned(struct dma_device *dev, size_t off1, + size_t off2, size_t len) +{ + return dmaengine_check_align(dev->pq_align, off1, off2, len); +} + +static inline bool is_dma_fill_aligned(struct dma_device *dev, size_t off1, + size_t off2, size_t len) +{ + return dmaengine_check_align(dev->fill_align, off1, off2, len); +} + static inline void dma_set_maxpq(struct dma_device *dma, int maxpq, int has_pq_continue) { -- cgit v1.2.3 From b265b11fc1a0bd6ae5a7fde12e374583a52ab326 Mon Sep 17 00:00:00 2001 From: Tom Picard Date: Tue, 8 Sep 2009 17:43:01 -0700 Subject: ioat3: ioat3.2 pci ids for Jasper Forest Jasper Forest introduces raid offload support via ioat3.2 support. When raid offload is enabled two (out of 8 channels) will report raid5/raid6 offload capabilities. The remaining channels will only report ioat3.0 capabilities (memcpy). Signed-off-by: Tom Picard Signed-off-by: Dan Williams --- include/linux/pci_ids.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 0f71812d67d3..2b4b8ce53256 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2529,6 +2529,16 @@ #define PCI_DEVICE_ID_INTEL_E7525_MCH 0x359e #define PCI_DEVICE_ID_INTEL_IOAT_CNB 0x360b #define PCI_DEVICE_ID_INTEL_FBD_CNB 0x360c +#define PCI_DEVICE_ID_INTEL_IOAT_JSF0 0x3710 +#define PCI_DEVICE_ID_INTEL_IOAT_JSF1 0x3711 +#define PCI_DEVICE_ID_INTEL_IOAT_JSF2 0x3712 +#define PCI_DEVICE_ID_INTEL_IOAT_JSF3 0x3713 +#define PCI_DEVICE_ID_INTEL_IOAT_JSF4 0x3714 +#define PCI_DEVICE_ID_INTEL_IOAT_JSF5 0x3715 +#define PCI_DEVICE_ID_INTEL_IOAT_JSF6 0x3716 +#define PCI_DEVICE_ID_INTEL_IOAT_JSF7 0x3717 +#define PCI_DEVICE_ID_INTEL_IOAT_JSF8 0x3718 +#define PCI_DEVICE_ID_INTEL_IOAT_JSF9 0x3719 #define PCI_DEVICE_ID_INTEL_ICH10_0 0x3a14 #define PCI_DEVICE_ID_INTEL_ICH10_1 0x3a16 #define PCI_DEVICE_ID_INTEL_ICH10_2 0x3a18 -- cgit v1.2.3 From 0803172778901e24a75ab074798d98c2b7411559 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 8 Sep 2009 17:53:04 -0700 Subject: dmaengine: kill tx_list The tx_list attribute of struct dma_async_tx_descriptor is common to most, but not all dma driver implementations. None of the upper level code (dmaengine/async_tx) uses it, so allow drivers to implement it locally if they need it. This saves sizeof(struct list_head) bytes for drivers that do not manage descriptors with a linked list (e.g.: ioatdma v2,3). Signed-off-by: Dan Williams --- include/linux/dmaengine.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index ffefba81c818..f114bc7790bc 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -180,8 +180,6 @@ typedef void (*dma_async_tx_callback)(void *dma_async_param); * @flags: flags to augment operation preparation, control completion, and * communicate status * @phys: physical address of the descriptor - * @tx_list: driver common field for operations that require multiple - * descriptors * @chan: target channel for this operation * @tx_submit: set the prepared descriptor(s) to be executed by the engine * @callback: routine to call after this operation is complete @@ -195,7 +193,6 @@ struct dma_async_tx_descriptor { dma_cookie_t cookie; enum dma_ctrl_flags flags; /* not a 'long' to pack with cookie */ dma_addr_t phys; - struct list_head tx_list; struct dma_chan *chan; dma_cookie_t (*tx_submit)(struct dma_async_tx_descriptor *tx); dma_async_tx_callback callback; -- cgit v1.2.3 From 5d5d9c97ff807b643b6c2284dea7fe04ecc74355 Mon Sep 17 00:00:00 2001 From: Tushar Gohad Date: Wed, 9 Sep 2009 03:42:23 -0700 Subject: IPv6/addrconf: Fix minor addrlabel thinko Fix apparent thinko related to RTM_DELADDRLABEL, introduced by commit 2a8cc6c89039e0530a3335954253b76ed0f9339a ("[IPV6] ADDRCONF: Support RFC3484 configurable address selection policy table."). Signed-off-by: Tushar Gohad Signed-off-by: David S. Miller --- include/linux/rtnetlink.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h index ba3254ecf7fb..adf2068d12b5 100644 --- a/include/linux/rtnetlink.h +++ b/include/linux/rtnetlink.h @@ -104,7 +104,7 @@ enum { RTM_NEWADDRLABEL = 72, #define RTM_NEWADDRLABEL RTM_NEWADDRLABEL RTM_DELADDRLABEL, -#define RTM_NEWADDRLABEL RTM_NEWADDRLABEL +#define RTM_DELADDRLABEL RTM_DELADDRLABEL RTM_GETADDRLABEL, #define RTM_GETADDRLABEL RTM_GETADDRLABEL -- cgit v1.2.3 From 24ea602e183ca20a7577ebe253323d0e5d0f9847 Mon Sep 17 00:00:00 2001 From: Albert Herranz Date: Tue, 8 Sep 2009 19:30:12 +0200 Subject: ssb: Implement SDIO host bus support Add support for communicating with a Sonics Silicon Backplane through a SDIO interface, as found in the Nintendo Wii WLAN daughter card. The Nintendo Wii WLAN card includes a custom Broadcom 4318 chip with a SDIO host interface. Signed-off-by: Albert Herranz Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- include/linux/ssb/ssb.h | 25 +++++++++++++++++++++++-- 1 file changed, 23 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h index 17ffc1f84d76..3d0a9ff24f01 100644 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -238,6 +238,7 @@ enum ssb_bustype { SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */ SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */ SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */ + SSB_BUSTYPE_SDIO, /* SSB is connected to SDIO bus */ }; /* board_vendor */ @@ -270,8 +271,12 @@ struct ssb_bus { /* The core in the basic address register window. (PCI bus only) */ struct ssb_device *mapped_device; - /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */ - u8 mapped_pcmcia_seg; + union { + /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */ + u8 mapped_pcmcia_seg; + /* Current SSB base address window for SDIO. */ + u32 sdio_sbaddr; + }; /* Lock for core and segment switching. * On PCMCIA-host busses this is used to protect the whole MMIO access. */ spinlock_t bar_lock; @@ -282,6 +287,11 @@ struct ssb_bus { struct pci_dev *host_pci; /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */ struct pcmcia_device *host_pcmcia; + /* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */ + struct sdio_func *host_sdio; + + /* See enum ssb_quirks */ + unsigned int quirks; #ifdef CONFIG_SSB_SPROM /* Mutex to protect the SPROM writing. */ @@ -336,6 +346,11 @@ struct ssb_bus { #endif /* DEBUG */ }; +enum ssb_quirks { + /* SDIO connected card requires performing a read after writing a 32-bit value */ + SSB_QUIRK_SDIO_READ_AFTER_WRITE32 = (1 << 0), +}; + /* The initialization-invariants. */ struct ssb_init_invariants { /* Versioning information about the PCB. */ @@ -366,6 +381,12 @@ extern int ssb_bus_pcmciabus_register(struct ssb_bus *bus, struct pcmcia_device *pcmcia_dev, unsigned long baseaddr); #endif /* CONFIG_SSB_PCMCIAHOST */ +#ifdef CONFIG_SSB_SDIOHOST +extern int ssb_bus_sdiobus_register(struct ssb_bus *bus, + struct sdio_func *sdio_func, + unsigned int quirks); +#endif /* CONFIG_SSB_SDIOHOST */ + extern void ssb_bus_unregister(struct ssb_bus *bus); -- cgit v1.2.3 From 711d57796f5ce2d02d6e62c9034afbb16aedda31 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Mon, 27 Jul 2009 23:37:48 +0300 Subject: PCI: expose function reset capability in sysfs Some devices allow an individual function to be reset without affecting other functions in the same device: that's what pci_reset_function does. For devices that have this support, expose reset attribite in sysfs. This is useful e.g. for virtualization, where a qemu userspace process wants to reset the device when the guest is reset, to emulate machine reboot as closely as possible. Acked-by: Greg Kroah-Hartman Signed-off-by: Michael S. Tsirkin Signed-off-by: Jesse Barnes --- include/linux/pci.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index 115fb7ba5089..a90f94020798 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -276,6 +276,7 @@ struct pci_dev { unsigned int state_saved:1; unsigned int is_physfn:1; unsigned int is_virtfn:1; + unsigned int reset_fn:1; pci_dev_flags_t dev_flags; atomic_t enable_cnt; /* pci_enable_device has been called */ -- cgit v1.2.3 From 1d4a433fc4e9c7dbfc2069a8f1a1f4338b982427 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Thu, 6 Aug 2009 15:13:59 -0400 Subject: PCI: Document pci_ids.h addition policy. IDs should generally only be added to pci_ids.h when they're shared across several files in the tree. IDs that are just used by a single driver should be defined in the driver instead. Perhaps documenting this is a good idea to prevent things being moved there, as it still seems to be happening judging from the git log. (based on discussion w/gregkh and others). Acked-by: Greg Kroah-Hartman Signed-off-by: Dave Jones Signed-off-by: Jesse Barnes --- include/linux/pci_ids.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 73b46b6b904f..6235ce2bea04 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2,6 +2,9 @@ * PCI Class, Vendor and Device IDs * * Please keep sorted. + * + * Do not add new entries to this file unless the definitions + * are shared between multiple drivers. */ /* Device classes and subclasses */ -- cgit v1.2.3 From deb2d2ecd43dfc51efe71eed7128fda514da96c6 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 11 Aug 2009 15:52:06 +1000 Subject: PCI/GPU: implement VGA arbitration on Linux Background: Graphic devices are accessed through ranges in I/O or memory space. While most modern devices allow relocation of such ranges, some "Legacy" VGA devices implemented on PCI will typically have the same "hard-decoded" addresses as they did on ISA. For more details see "PCI Bus Binding to IEEE Std 1275-1994 Standard for Boot (Initialization Configuration) Firmware Revision 2.1" Section 7, Legacy Devices. The Resource Access Control (RAC) module inside the X server currently does the task of arbitration when more than one legacy device co-exists on the same machine. But the problem happens when these devices are trying to be accessed by different userspace clients (e.g. two server in parallel). Their address assignments conflict. Therefore an arbitration scheme _outside_ of the X server is needed to control the sharing of these resources. This document introduces the operation of the VGA arbiter implemented for Linux kernel. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Tiago Vignatti Signed-off-by: Dave Airlie Signed-off-by: Jesse Barnes --- include/linux/pci.h | 2 + include/linux/vgaarb.h | 195 +++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 197 insertions(+) create mode 100644 include/linux/vgaarb.h (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index a90f94020798..6dbb1fd30e5a 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -806,6 +806,8 @@ int pci_cfg_space_size_ext(struct pci_dev *dev); int pci_cfg_space_size(struct pci_dev *dev); unsigned char pci_bus_max_busnr(struct pci_bus *bus); +int pci_set_vga_state(struct pci_dev *pdev, bool decode, + unsigned int command_bits, bool change_bridge); /* kmem_cache style wrapper around pci_alloc_consistent() */ #include diff --git a/include/linux/vgaarb.h b/include/linux/vgaarb.h new file mode 100644 index 000000000000..68229ce80fde --- /dev/null +++ b/include/linux/vgaarb.h @@ -0,0 +1,195 @@ +/* + * vgaarb.c + * + * (C) Copyright 2005 Benjamin Herrenschmidt + * (C) Copyright 2007 Paulo R. Zanoni + * (C) Copyright 2007, 2009 Tiago Vignatti + */ + +#ifndef LINUX_VGA_H + +#include + +/* Legacy VGA regions */ +#define VGA_RSRC_NONE 0x00 +#define VGA_RSRC_LEGACY_IO 0x01 +#define VGA_RSRC_LEGACY_MEM 0x02 +#define VGA_RSRC_LEGACY_MASK (VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM) +/* Non-legacy access */ +#define VGA_RSRC_NORMAL_IO 0x04 +#define VGA_RSRC_NORMAL_MEM 0x08 + +/* Passing that instead of a pci_dev to use the system "default" + * device, that is the one used by vgacon. Archs will probably + * have to provide their own vga_default_device(); + */ +#define VGA_DEFAULT_DEVICE (NULL) + +/* For use by clients */ + +/** + * vga_set_legacy_decoding + * + * @pdev: pci device of the VGA card + * @decodes: bit mask of what legacy regions the card decodes + * + * Indicates to the arbiter if the card decodes legacy VGA IOs, + * legacy VGA Memory, both, or none. All cards default to both, + * the card driver (fbdev for example) should tell the arbiter + * if it has disabled legacy decoding, so the card can be left + * out of the arbitration process (and can be safe to take + * interrupts at any time. + */ +extern void vga_set_legacy_decoding(struct pci_dev *pdev, + unsigned int decodes); + +/** + * vga_get - acquire & locks VGA resources + * + * pdev: pci device of the VGA card or NULL for the system default + * rsrc: bit mask of resources to acquire and lock + * interruptible: blocking should be interruptible by signals ? + * + * This function acquires VGA resources for the given + * card and mark those resources locked. If the resource requested + * are "normal" (and not legacy) resources, the arbiter will first check + * wether the card is doing legacy decoding for that type of resource. If + * yes, the lock is "converted" into a legacy resource lock. + * The arbiter will first look for all VGA cards that might conflict + * and disable their IOs and/or Memory access, inlcuding VGA forwarding + * on P2P bridges if necessary, so that the requested resources can + * be used. Then, the card is marked as locking these resources and + * the IO and/or Memory accesse are enabled on the card (including + * VGA forwarding on parent P2P bridges if any). + * This function will block if some conflicting card is already locking + * one of the required resources (or any resource on a different bus + * segment, since P2P bridges don't differenciate VGA memory and IO + * afaik). You can indicate wether this blocking should be interruptible + * by a signal (for userland interface) or not. + * Must not be called at interrupt time or in atomic context. + * If the card already owns the resources, the function succeeds. + * Nested calls are supported (a per-resource counter is maintained) + */ + +extern int vga_get(struct pci_dev *pdev, unsigned int rsrc, + int interruptible); + +/** + * vga_get_interruptible + * + * Shortcut to vga_get + */ + +static inline int vga_get_interruptible(struct pci_dev *pdev, + unsigned int rsrc) +{ + return vga_get(pdev, rsrc, 1); +} + +/** + * vga_get_interruptible + * + * Shortcut to vga_get + */ + +static inline int vga_get_uninterruptible(struct pci_dev *pdev, + unsigned int rsrc) +{ + return vga_get(pdev, rsrc, 0); +} + +/** + * vga_tryget - try to acquire & lock legacy VGA resources + * + * @pdev: pci devivce of VGA card or NULL for system default + * @rsrc: bit mask of resources to acquire and lock + * + * This function performs the same operation as vga_get(), but + * will return an error (-EBUSY) instead of blocking if the resources + * are already locked by another card. It can be called in any context + */ + +extern int vga_tryget(struct pci_dev *pdev, unsigned int rsrc); + +/** + * vga_put - release lock on legacy VGA resources + * + * @pdev: pci device of VGA card or NULL for system default + * @rsrc: but mask of resource to release + * + * This function releases resources previously locked by vga_get() + * or vga_tryget(). The resources aren't disabled right away, so + * that a subsequence vga_get() on the same card will succeed + * immediately. Resources have a counter, so locks are only + * released if the counter reaches 0. + */ + +extern void vga_put(struct pci_dev *pdev, unsigned int rsrc); + + +/** + * vga_default_device + * + * This can be defined by the platform. The default implementation + * is rather dumb and will probably only work properly on single + * vga card setups and/or x86 platforms. + * + * If your VGA default device is not PCI, you'll have to return + * NULL here. In this case, I assume it will not conflict with + * any PCI card. If this is not true, I'll have to define two archs + * hooks for enabling/disabling the VGA default device if that is + * possible. This may be a problem with real _ISA_ VGA cards, in + * addition to a PCI one. I don't know at this point how to deal + * with that card. Can theirs IOs be disabled at all ? If not, then + * I suppose it's a matter of having the proper arch hook telling + * us about it, so we basically never allow anybody to succeed a + * vga_get()... + */ + +#ifndef __ARCH_HAS_VGA_DEFAULT_DEVICE +extern struct pci_dev *vga_default_device(void); +#endif + +/** + * vga_conflicts + * + * Architectures should define this if they have several + * independant PCI domains that can afford concurrent VGA + * decoding + */ + +#ifndef __ARCH_HAS_VGA_CONFLICT +static inline int vga_conflicts(struct pci_dev *p1, struct pci_dev *p2) +{ + return 1; +} +#endif + +/* + * Register a client with the VGA arbitration logic + * return value: number of VGA devices in system. + * + * Clients have two callback mechanisms they can use. + * irq enable/disable callback - + * If a client can't disable its GPUs VGA resources, then we + * need to be able to ask it to turn off its irqs when we + * turn off its mem and io decoding. + * set_vga_decode + * If a client can disable its GPU VGA resource, it will + * get a callback from this to set the encode/decode state + * + * Clients with disable abilities should check the return value + * of this function and if the VGA device count is > 1, should + * disable VGA decoding resources. + * + * Rationale: we cannot disable VGA decode resources unconditionally + * some single GPU laptops seem to require ACPI or BIOS access to the + * VGA registers to control things like backlights etc. + * Hopefully newer multi-GPU laptops do something saner, and desktops + * won't have any special ACPI for this. + */ +int vga_client_register(struct pci_dev *pdev, void *cookie, + void (*irq_set_state)(void *cookie, bool state), + unsigned int (*set_vga_decode)(void *cookie, bool state)); + +#endif /* LINUX_VGA_H */ -- cgit v1.2.3 From 260d703adc5f275e3ba7ddff6e2e0217bc613b35 Mon Sep 17 00:00:00 2001 From: Mike Mason Date: Thu, 30 Jul 2009 15:33:21 -0700 Subject: PCI: support for PCI Express fundamental reset This is the first of three patches that implement a bit field that PCI Express device drivers can use to indicate they need a fundamental reset during error recovery. By default, the EEH framework on powerpc does what's known as a "hot reset" during recovery of a PCI Express device. We've found a case where the device needs a "fundamental reset" to recover properly. The current PCI error recovery and EEH frameworks do not support this distinction. The attached patch (courtesy of Richard Lary) adds a bit field to pci_dev that indicates whether the device requires a fundamental reset during recovery. These patches supersede the previously submitted patch that implemented a fundamental reset bit field. Signed-off-by: Mike Mason Signed-off-by: Richard Lary Signed-off-by: Jesse Barnes --- include/linux/pci.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index 6dbb1fd30e5a..da90217a7b0e 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -273,6 +273,7 @@ struct pci_dev { unsigned int ari_enabled:1; /* ARI forwarding */ unsigned int is_managed:1; unsigned int is_pcie:1; + unsigned int needs_freset:1; /* Dev requires fundamental reset */ unsigned int state_saved:1; unsigned int is_physfn:1; unsigned int is_virtfn:1; -- cgit v1.2.3 From 6ac3bd527007eeecb148b67ca47b21731fd8a503 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 19 Aug 2009 15:21:57 +1000 Subject: PCI/vgaarb: cleanup some warnings + cleanup some comments. Fix some warnings reported in linux-next + also cleanup some comment errors noticed by Pekka Paalanen. Signed-off-by: Dave Airlie Signed-off-by: Jesse Barnes --- include/linux/vgaarb.h | 49 +++++++++++++++++++++++++++---------------------- 1 file changed, 27 insertions(+), 22 deletions(-) (limited to 'include/linux') diff --git a/include/linux/vgaarb.h b/include/linux/vgaarb.h index 68229ce80fde..e81c64af80c1 100644 --- a/include/linux/vgaarb.h +++ b/include/linux/vgaarb.h @@ -46,9 +46,9 @@ extern void vga_set_legacy_decoding(struct pci_dev *pdev, /** * vga_get - acquire & locks VGA resources * - * pdev: pci device of the VGA card or NULL for the system default - * rsrc: bit mask of resources to acquire and lock - * interruptible: blocking should be interruptible by signals ? + * @pdev: pci device of the VGA card or NULL for the system default + * @rsrc: bit mask of resources to acquire and lock + * @interruptible: blocking should be interruptible by signals ? * * This function acquires VGA resources for the given * card and mark those resources locked. If the resource requested @@ -81,19 +81,19 @@ extern int vga_get(struct pci_dev *pdev, unsigned int rsrc, */ static inline int vga_get_interruptible(struct pci_dev *pdev, - unsigned int rsrc) + unsigned int rsrc) { return vga_get(pdev, rsrc, 1); } /** - * vga_get_interruptible + * vga_get_uninterruptible * * Shortcut to vga_get */ static inline int vga_get_uninterruptible(struct pci_dev *pdev, - unsigned int rsrc) + unsigned int rsrc) { return vga_get(pdev, rsrc, 0); } @@ -165,28 +165,33 @@ static inline int vga_conflicts(struct pci_dev *p1, struct pci_dev *p2) } #endif -/* - * Register a client with the VGA arbitration logic - * return value: number of VGA devices in system. - * - * Clients have two callback mechanisms they can use. - * irq enable/disable callback - - * If a client can't disable its GPUs VGA resources, then we - * need to be able to ask it to turn off its irqs when we - * turn off its mem and io decoding. - * set_vga_decode - * If a client can disable its GPU VGA resource, it will - * get a callback from this to set the encode/decode state - * - * Clients with disable abilities should check the return value - * of this function and if the VGA device count is > 1, should - * disable VGA decoding resources. +/** + * vga_client_register + * + * @pdev: pci device of the VGA client + * @cookie: client cookie to be used in callbacks + * @irq_set_state: irq state change callback + * @set_vga_decode: vga decode change callback + * + * return value: 0 on success, -1 on failure + * Register a client with the VGA arbitration logic + * + * Clients have two callback mechanisms they can use. + * irq enable/disable callback - + * If a client can't disable its GPUs VGA resources, then we + * need to be able to ask it to turn off its irqs when we + * turn off its mem and io decoding. + * set_vga_decode + * If a client can disable its GPU VGA resource, it will + * get a callback from this to set the encode/decode state * * Rationale: we cannot disable VGA decode resources unconditionally * some single GPU laptops seem to require ACPI or BIOS access to the * VGA registers to control things like backlights etc. * Hopefully newer multi-GPU laptops do something saner, and desktops * won't have any special ACPI for this. + * They driver will get a callback when VGA arbitration is first used + * by userspace since we some older X servers have issues. */ int vga_client_register(struct pci_dev *pdev, void *cookie, void (*irq_set_state)(void *cookie, bool state), -- cgit v1.2.3 From 825c423a35a80a8fd66398a3f9bde7f0b0187a76 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Wed, 29 Jul 2009 14:39:58 +0900 Subject: PCI hotplug: add support for 5.0G link speed Add support for PCI-E 5.0 GT/s in max_bus_speed and cur_bus_speed. Reviewed-by: Matthew Wilcox Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes --- include/linux/pci_hotplug.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h index 4391741b99dc..1b00cc3177fc 100644 --- a/include/linux/pci_hotplug.h +++ b/include/linux/pci_hotplug.h @@ -62,7 +62,8 @@ enum pcie_link_width { }; enum pcie_link_speed { - PCIE_2PT5GB = 0x14, + PCIE_2_5GB = 0x14, + PCIE_5_0GB = 0x15, PCIE_LNK_SPEED_UNKNOWN = 0xFF, }; -- cgit v1.2.3 From 9dba910e9de2c4aa15ec1286f10052c107ef48ca Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 3 Sep 2009 15:26:36 +0900 Subject: PCI: separate out pci_add_dynid() Separate out pci_add_dynid() from store_new_id() and export it so that in-kernel code can add PCI IDs dynamically. As the function will be available regardless of HOTPLUG, put it and pull pci_free_dynids() outside of CONFIG_HOTPLUG. This will be used by pci-stub to initialize initial IDs via module param. While at it, remove bogus get_driver() failure check. Signed-off-by: Tejun Heo Acked-by: Greg Kroah-Hartman Reviewed-by: Grant Grundler Signed-off-by: Jesse Barnes --- include/linux/pci.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index da90217a7b0e..d75668317705 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -796,6 +796,11 @@ int __must_check __pci_register_driver(struct pci_driver *, struct module *, void pci_unregister_driver(struct pci_driver *dev); void pci_remove_behind_bridge(struct pci_dev *dev); struct pci_driver *pci_dev_driver(const struct pci_dev *dev); +int pci_add_dynid(struct pci_driver *drv, + unsigned int vendor, unsigned int device, + unsigned int subvendor, unsigned int subdevice, + unsigned int class, unsigned int class_mask, + unsigned long driver_data); const struct pci_device_id *pci_match_id(const struct pci_device_id *ids, struct pci_dev *dev); int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, -- cgit v1.2.3 From 28760489a3f1e136c5ae8581c0fa8f63511f2f4c Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 9 Sep 2009 14:09:24 -0700 Subject: PCI: pcie: Ensure hotplug ports have a minimum number of resources In general a BIOS may goof or we may hotplug in a hotplug controller. In either case the kernel needs to reserve resources for plugging in more devices in the future instead of creating a minimal resource assignment. We already do this for cardbus bridges I am just adding a variant for pcie bridges. v2: Make testing for pcie hotplug bridges based on a flag. So far we only set the flag for pcie but a header_quirk could easily be added for the non-standard pci hotplug bridges. Signed-off-by: Eric W. Biederman Signed-off-by: Jesse Barnes --- include/linux/pci.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index d75668317705..d80ed872a3c4 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -278,6 +278,7 @@ struct pci_dev { unsigned int is_physfn:1; unsigned int is_virtfn:1; unsigned int reset_fn:1; + unsigned int is_hotplug_bridge:1; pci_dev_flags_t dev_flags; atomic_t enable_cnt; /* pci_enable_device has been called */ @@ -1245,6 +1246,9 @@ extern int pci_pci_problems; extern unsigned long pci_cardbus_io_size; extern unsigned long pci_cardbus_mem_size; +extern unsigned long pci_hotplug_io_size; +extern unsigned long pci_hotplug_mem_size; + int pcibios_add_platform_entries(struct pci_dev *dev); void pcibios_disable_device(struct pci_dev *dev); int pcibios_set_pcie_reset_state(struct pci_dev *dev, -- cgit v1.2.3 From e80bb09d2c73d76a2a4cd79e4a83802dd901c642 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 8 Sep 2009 23:14:49 +0200 Subject: PCI PM: Introduce device flag wakeup_prepared Introduce a new PCI device flag, wakeup_prepared, to prevent PCI wake-up preparation code from being executed twice in a row for the same device and for the same purpose. Reviewed-by: Matthew Garrett Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- include/linux/pci.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index d80ed872a3c4..f5c7cd343e56 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -241,6 +241,7 @@ struct pci_dev { unsigned int d1_support:1; /* Low power state D1 is supported */ unsigned int d2_support:1; /* Low power state D2 is supported */ unsigned int no_d1d2:1; /* Only allow D0 and D3 */ + unsigned int wakeup_prepared:1; #ifdef CONFIG_PCIEASPM struct pcie_link_state *link_state; /* ASPM link state. */ -- cgit v1.2.3 From 890ca9aefa78f7831f8f633cab9e4803636dffe4 Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Mon, 11 May 2009 16:48:15 +0800 Subject: KVM: Add MCE support The related MSRs are emulated. MCE capability is exported via extension KVM_CAP_MCE and ioctl KVM_X86_GET_MCE_CAP_SUPPORTED. A new vcpu ioctl command KVM_X86_SETUP_MCE is used to setup MCE emulation such as the mcg_cap. MCE is injected via vcpu ioctl command KVM_X86_SET_MCE. Extended machine-check state (MCG_EXT_P) and CMCI are not implemented. Signed-off-by: Huang Ying Signed-off-by: Avi Kivity --- include/linux/kvm.h | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'include/linux') diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 3db5d8d37485..7b17141c47c9 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -415,6 +415,9 @@ struct kvm_trace_rec { #define KVM_CAP_ASSIGN_DEV_IRQ 29 /* Another bug in KVM_SET_USER_MEMORY_REGION fixed: */ #define KVM_CAP_JOIN_MEMORY_REGIONS_WORKS 30 +#ifdef __KVM_HAVE_MCE +#define KVM_CAP_MCE 31 +#endif #ifdef KVM_CAP_IRQ_ROUTING @@ -454,6 +457,19 @@ struct kvm_irq_routing { #endif +#ifdef KVM_CAP_MCE +/* x86 MCE */ +struct kvm_x86_mce { + __u64 status; + __u64 addr; + __u64 misc; + __u64 mcg_status; + __u8 bank; + __u8 pad1[7]; + __u64 pad2[3]; +}; +#endif + /* * ioctls for VM fds */ @@ -541,6 +557,10 @@ struct kvm_irq_routing { #define KVM_NMI _IO(KVMIO, 0x9a) /* Available with KVM_CAP_SET_GUEST_DEBUG */ #define KVM_SET_GUEST_DEBUG _IOW(KVMIO, 0x9b, struct kvm_guest_debug) +/* MCE for x86 */ +#define KVM_X86_SETUP_MCE _IOW(KVMIO, 0x9c, __u64) +#define KVM_X86_GET_MCE_CAP_SUPPORTED _IOR(KVMIO, 0x9d, __u64) +#define KVM_X86_SET_MCE _IOW(KVMIO, 0x9e, struct kvm_x86_mce) /* * Deprecated interfaces -- cgit v1.2.3 From 721eecbf4fe995ca94a9edec0c9843b1cc0eaaf3 Mon Sep 17 00:00:00 2001 From: Gregory Haskins Date: Wed, 20 May 2009 10:30:49 -0400 Subject: KVM: irqfd KVM provides a complete virtual system environment for guests, including support for injecting interrupts modeled after the real exception/interrupt facilities present on the native platform (such as the IDT on x86). Virtual interrupts can come from a variety of sources (emulated devices, pass-through devices, etc) but all must be injected to the guest via the KVM infrastructure. This patch adds a new mechanism to inject a specific interrupt to a guest using a decoupled eventfd mechnanism: Any legal signal on the irqfd (using eventfd semantics from either userspace or kernel) will translate into an injected interrupt in the guest at the next available interrupt window. Signed-off-by: Gregory Haskins Signed-off-by: Avi Kivity --- include/linux/kvm.h | 11 +++++++++++ include/linux/kvm_host.h | 24 ++++++++++++++++++++++++ 2 files changed, 35 insertions(+) (limited to 'include/linux') diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 7b17141c47c9..8f53f24e5274 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -418,6 +418,7 @@ struct kvm_trace_rec { #ifdef __KVM_HAVE_MCE #define KVM_CAP_MCE 31 #endif +#define KVM_CAP_IRQFD 32 #ifdef KVM_CAP_IRQ_ROUTING @@ -470,6 +471,15 @@ struct kvm_x86_mce { }; #endif +#define KVM_IRQFD_FLAG_DEASSIGN (1 << 0) + +struct kvm_irqfd { + __u32 fd; + __u32 gsi; + __u32 flags; + __u8 pad[20]; +}; + /* * ioctls for VM fds */ @@ -514,6 +524,7 @@ struct kvm_x86_mce { #define KVM_ASSIGN_SET_MSIX_ENTRY \ _IOW(KVMIO, 0x74, struct kvm_assigned_msix_entry) #define KVM_DEASSIGN_DEV_IRQ _IOW(KVMIO, 0x75, struct kvm_assigned_irq) +#define KVM_IRQFD _IOW(KVMIO, 0x76, struct kvm_irqfd) /* * ioctls for vcpu fds diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 3060bdc35ffe..7724dcb6ff76 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -136,6 +136,12 @@ struct kvm { struct list_head vm_list; struct kvm_io_bus mmio_bus; struct kvm_io_bus pio_bus; +#ifdef CONFIG_HAVE_KVM_EVENTFD + struct { + spinlock_t lock; + struct list_head items; + } irqfds; +#endif struct kvm_vm_stat stat; struct kvm_arch arch; atomic_t users_count; @@ -525,4 +531,22 @@ static inline void kvm_free_irq_routing(struct kvm *kvm) {} #endif +#ifdef CONFIG_HAVE_KVM_EVENTFD + +void kvm_irqfd_init(struct kvm *kvm); +int kvm_irqfd(struct kvm *kvm, int fd, int gsi, int flags); +void kvm_irqfd_release(struct kvm *kvm); + +#else + +static inline void kvm_irqfd_init(struct kvm *kvm) {} +static inline int kvm_irqfd(struct kvm *kvm, int fd, int gsi, int flags) +{ + return -EINVAL; +} + +static inline void kvm_irqfd_release(struct kvm *kvm) {} + +#endif /* CONFIG_HAVE_KVM_EVENTFD */ + #endif -- cgit v1.2.3 From c5ff41ce66382d657a76bc06ba252d848826950f Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Thu, 14 May 2009 22:42:53 +0200 Subject: KVM: Allow PIT emulation without speaker port The in-kernel speaker emulation is only a dummy and also unneeded from the performance point of view. Rather, it takes user space support to generate sound output on the host, e.g. console beeps. To allow this, introduce KVM_CREATE_PIT2 which controls in-kernel speaker port emulation via a flag passed along the new IOCTL. It also leaves room for future extensions of the PIT configuration interface. Signed-off-by: Jan Kiszka Signed-off-by: Avi Kivity --- include/linux/kvm.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/linux') diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 8f53f24e5274..65df6f5e2b98 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -70,6 +70,14 @@ struct kvm_irqchip { } chip; }; +/* for KVM_CREATE_PIT2 */ +struct kvm_pit_config { + __u32 flags; + __u32 pad[15]; +}; + +#define KVM_PIT_SPEAKER_DUMMY 1 + #define KVM_EXIT_UNKNOWN 0 #define KVM_EXIT_EXCEPTION 1 #define KVM_EXIT_IO 2 @@ -419,6 +427,9 @@ struct kvm_trace_rec { #define KVM_CAP_MCE 31 #endif #define KVM_CAP_IRQFD 32 +#ifdef __KVM_HAVE_PIT +#define KVM_CAP_PIT2 33 +#endif #ifdef KVM_CAP_IRQ_ROUTING @@ -525,6 +536,7 @@ struct kvm_irqfd { _IOW(KVMIO, 0x74, struct kvm_assigned_msix_entry) #define KVM_DEASSIGN_DEV_IRQ _IOW(KVMIO, 0x75, struct kvm_assigned_irq) #define KVM_IRQFD _IOW(KVMIO, 0x76, struct kvm_irqfd) +#define KVM_CREATE_PIT2 _IOW(KVMIO, 0x77, struct kvm_pit_config) /* * ioctls for vcpu fds -- cgit v1.2.3 From e7333391403b31feb27a05bc0dcd052a471f1276 Mon Sep 17 00:00:00 2001 From: Sheng Yang Date: Thu, 21 May 2009 13:50:13 +0800 Subject: KVM: Downsize max support MSI-X entry to 256 We only trap one page for MSI-X entry now, so it's 4k/(128/8) = 256 entries at most. Signed-off-by: Sheng Yang Signed-off-by: Avi Kivity --- include/linux/kvm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 65df6f5e2b98..632a8560dbcf 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -676,7 +676,7 @@ struct kvm_assigned_msix_nr { __u16 padding; }; -#define KVM_MAX_MSIX_PER_DEV 512 +#define KVM_MAX_MSIX_PER_DEV 256 struct kvm_assigned_msix_entry { __u32 assigned_dev_id; __u32 gsi; -- cgit v1.2.3 From b188d2d365702cfc660a56d66f4bf77ebf14a5c2 Mon Sep 17 00:00:00 2001 From: Christian Ehrhardt Date: Fri, 29 May 2009 12:58:50 +0200 Subject: KVM: remove redundant declarations Changing s390 code in kvm_arch_vcpu_load/put come across this header declarations. They are complete duplicates, not even useful forward declarations as nothing using it is in between (maybe it was that in the past). This patch removes the two dispensable lines. Signed-off-by: Christian Ehrhardt Signed-off-by: Avi Kivity --- include/linux/kvm_host.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 7724dcb6ff76..19240feefe6f 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -249,8 +249,6 @@ long kvm_arch_dev_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg); long kvm_arch_vcpu_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg); -void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu); -void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu); int kvm_dev_ioctl_check_extension(long ext); -- cgit v1.2.3 From 60eead79ad8750f80384cbe48fc44edcc78a0305 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Thu, 4 Jun 2009 15:08:23 -0300 Subject: KVM: introduce irq_lock, use it to protect ioapic Introduce irq_lock, and use to protect ioapic data structures. Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity --- include/linux/kvm_host.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 19240feefe6f..0c71688b1ee3 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -124,7 +124,6 @@ struct kvm_kernel_irq_routing_entry { }; struct kvm { - struct mutex lock; /* protects the vcpus array and APIC accesses */ spinlock_t mmu_lock; spinlock_t requests_lock; struct rw_semaphore slots_lock; @@ -134,6 +133,7 @@ struct kvm { KVM_PRIVATE_MEM_SLOTS]; struct kvm_vcpu *vcpus[KVM_MAX_VCPUS]; struct list_head vm_list; + struct mutex lock; struct kvm_io_bus mmio_bus; struct kvm_io_bus pio_bus; #ifdef CONFIG_HAVE_KVM_EVENTFD @@ -150,6 +150,7 @@ struct kvm { struct kvm_coalesced_mmio_ring *coalesced_mmio_ring; #endif + struct mutex irq_lock; #ifdef CONFIG_HAVE_KVM_IRQCHIP struct list_head irq_routing; /* of kvm_kernel_irq_routing_entry */ struct hlist_head mask_notifier_list; -- cgit v1.2.3 From fa40a8214bb9bcae8d49c234c19d8b4a6c1f37ff Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Thu, 4 Jun 2009 15:08:24 -0300 Subject: KVM: switch irq injection/acking data structures to irq_lock Protect irq injection/acking data structures with a separate irq_lock mutex. This fixes the following deadlock: CPU A CPU B kvm_vm_ioctl_deassign_dev_irq() mutex_lock(&kvm->lock); worker_thread() -> kvm_deassign_irq() -> kvm_assigned_dev_interrupt_work_handler() -> deassign_host_irq() mutex_lock(&kvm->lock); -> cancel_work_sync() [blocked] [gleb: fix ia64 path] Reported-by: Alex Williamson Signed-off-by: Marcelo Tosatti Signed-off-by: Gleb Natapov Signed-off-by: Avi Kivity --- include/linux/kvm_host.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 0c71688b1ee3..a29ea030dd8e 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -371,7 +371,8 @@ int kvm_set_irq(struct kvm *kvm, int irq_source_id, int irq, int level); void kvm_notify_acked_irq(struct kvm *kvm, unsigned irqchip, unsigned pin); void kvm_register_irq_ack_notifier(struct kvm *kvm, struct kvm_irq_ack_notifier *kian); -void kvm_unregister_irq_ack_notifier(struct kvm_irq_ack_notifier *kian); +void kvm_unregister_irq_ack_notifier(struct kvm *kvm, + struct kvm_irq_ack_notifier *kian); int kvm_request_irq_source_id(struct kvm *kvm); void kvm_free_irq_source_id(struct kvm *kvm, int irq_source_id); -- cgit v1.2.3 From 6a4a98397331723dce25a7537270548d91523431 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Tue, 9 Jun 2009 11:33:36 +0300 Subject: KVM: Reorder ioctls in kvm.h Somehow the VM ioctls got unsorted; resort. Signed-off-by: Avi Kivity --- include/linux/kvm.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 632a8560dbcf..f1dada0519eb 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -495,11 +495,6 @@ struct kvm_irqfd { * ioctls for VM fds */ #define KVM_SET_MEMORY_REGION _IOW(KVMIO, 0x40, struct kvm_memory_region) -#define KVM_SET_NR_MMU_PAGES _IO(KVMIO, 0x44) -#define KVM_GET_NR_MMU_PAGES _IO(KVMIO, 0x45) -#define KVM_SET_USER_MEMORY_REGION _IOW(KVMIO, 0x46,\ - struct kvm_userspace_memory_region) -#define KVM_SET_TSS_ADDR _IO(KVMIO, 0x47) /* * KVM_CREATE_VCPU receives as a parameter the vcpu slot, and returns * a vcpu fd. @@ -507,6 +502,11 @@ struct kvm_irqfd { #define KVM_CREATE_VCPU _IO(KVMIO, 0x41) #define KVM_GET_DIRTY_LOG _IOW(KVMIO, 0x42, struct kvm_dirty_log) #define KVM_SET_MEMORY_ALIAS _IOW(KVMIO, 0x43, struct kvm_memory_alias) +#define KVM_SET_NR_MMU_PAGES _IO(KVMIO, 0x44) +#define KVM_GET_NR_MMU_PAGES _IO(KVMIO, 0x45) +#define KVM_SET_USER_MEMORY_REGION _IOW(KVMIO, 0x46,\ + struct kvm_userspace_memory_region) +#define KVM_SET_TSS_ADDR _IO(KVMIO, 0x47) /* Device model IOC */ #define KVM_CREATE_IRQCHIP _IO(KVMIO, 0x60) #define KVM_IRQ_LINE _IOW(KVMIO, 0x61, struct kvm_irq_level) -- cgit v1.2.3 From c5af89b68abb26eea5e745f33228f4d672f115e5 Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Tue, 9 Jun 2009 15:56:26 +0300 Subject: KVM: Introduce kvm_vcpu_is_bsp() function. Use it instead of open code "vcpu_id zero is BSP" assumption. Signed-off-by: Gleb Natapov Signed-off-by: Avi Kivity --- include/linux/kvm_host.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index a29ea030dd8e..a5bd429e9bd3 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -131,6 +131,7 @@ struct kvm { int nmemslots; struct kvm_memory_slot memslots[KVM_MEMORY_SLOTS + KVM_PRIVATE_MEM_SLOTS]; + struct kvm_vcpu *bsp_vcpu; struct kvm_vcpu *vcpus[KVM_MAX_VCPUS]; struct list_head vm_list; struct mutex lock; @@ -549,4 +550,8 @@ static inline void kvm_irqfd_release(struct kvm *kvm) {} #endif /* CONFIG_HAVE_KVM_EVENTFD */ +static inline bool kvm_vcpu_is_bsp(struct kvm_vcpu *vcpu) +{ + return vcpu->kvm->bsp_vcpu == vcpu; +} #endif -- cgit v1.2.3 From 73880c80aa9c8dc353cd0ad26579023213cd5314 Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Tue, 9 Jun 2009 15:56:28 +0300 Subject: KVM: Break dependency between vcpu index in vcpus array and vcpu_id. Archs are free to use vcpu_id as they see fit. For x86 it is used as vcpu's apic id. New ioctl is added to configure boot vcpu id that was assumed to be 0 till now. Signed-off-by: Gleb Natapov Signed-off-by: Avi Kivity --- include/linux/kvm.h | 2 ++ include/linux/kvm_host.h | 6 ++++++ 2 files changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/kvm.h b/include/linux/kvm.h index f1dada0519eb..5037e170a70d 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -430,6 +430,7 @@ struct kvm_trace_rec { #ifdef __KVM_HAVE_PIT #define KVM_CAP_PIT2 33 #endif +#define KVM_CAP_SET_BOOT_CPU_ID 34 #ifdef KVM_CAP_IRQ_ROUTING @@ -537,6 +538,7 @@ struct kvm_irqfd { #define KVM_DEASSIGN_DEV_IRQ _IOW(KVMIO, 0x75, struct kvm_assigned_irq) #define KVM_IRQFD _IOW(KVMIO, 0x76, struct kvm_irqfd) #define KVM_CREATE_PIT2 _IOW(KVMIO, 0x77, struct kvm_pit_config) +#define KVM_SET_BOOT_CPU_ID _IO(KVMIO, 0x78) /* * ioctls for vcpu fds diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index a5bd429e9bd3..d3fdf1a738c9 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -131,8 +131,12 @@ struct kvm { int nmemslots; struct kvm_memory_slot memslots[KVM_MEMORY_SLOTS + KVM_PRIVATE_MEM_SLOTS]; +#ifdef CONFIG_KVM_APIC_ARCHITECTURE + u32 bsp_vcpu_id; struct kvm_vcpu *bsp_vcpu; +#endif struct kvm_vcpu *vcpus[KVM_MAX_VCPUS]; + atomic_t online_vcpus; struct list_head vm_list; struct mutex lock; struct kvm_io_bus mmio_bus; @@ -550,8 +554,10 @@ static inline void kvm_irqfd_release(struct kvm *kvm) {} #endif /* CONFIG_HAVE_KVM_EVENTFD */ +#ifdef CONFIG_KVM_APIC_ARCHITECTURE static inline bool kvm_vcpu_is_bsp(struct kvm_vcpu *vcpu) { return vcpu->kvm->bsp_vcpu == vcpu; } #endif +#endif -- cgit v1.2.3 From 988a2cae6a3c0dea6df59808a935a9a697bfc28c Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Tue, 9 Jun 2009 15:56:29 +0300 Subject: KVM: Use macro to iterate over vcpus. [christian: remove unused variables on s390] Signed-off-by: Gleb Natapov Signed-off-by: Christian Borntraeger Signed-off-by: Avi Kivity --- include/linux/kvm_host.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/linux') diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index d3fdf1a738c9..c6e4d02067fe 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -179,6 +179,17 @@ struct kvm { #define kvm_printf(kvm, fmt ...) printk(KERN_DEBUG fmt) #define vcpu_printf(vcpu, fmt...) kvm_printf(vcpu->kvm, fmt) +static inline struct kvm_vcpu *kvm_get_vcpu(struct kvm *kvm, int i) +{ + smp_rmb(); + return kvm->vcpus[i]; +} + +#define kvm_for_each_vcpu(idx, vcpup, kvm) \ + for (idx = 0, vcpup = kvm_get_vcpu(kvm, idx); \ + idx < atomic_read(&kvm->online_vcpus) && vcpup; \ + vcpup = kvm_get_vcpu(kvm, ++idx)) + int kvm_vcpu_init(struct kvm_vcpu *vcpu, struct kvm *kvm, unsigned id); void kvm_vcpu_uninit(struct kvm_vcpu *vcpu); -- cgit v1.2.3 From 3f5d18a96577fd78277e08c467041573b9a65eaf Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Thu, 11 Jun 2009 15:43:28 +0300 Subject: KVM: Return to userspace on emulation failure Instead of mindlessly retrying to execute the instruction, report the failure to userspace. Signed-off-by: Avi Kivity --- include/linux/kvm.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 5037e170a70d..671051829da6 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -95,6 +95,10 @@ struct kvm_pit_config { #define KVM_EXIT_S390_RESET 14 #define KVM_EXIT_DCR 15 #define KVM_EXIT_NMI 16 +#define KVM_EXIT_INTERNAL_ERROR 17 + +/* For KVM_EXIT_INTERNAL_ERROR */ +#define KVM_INTERNAL_ERROR_EMULATION 1 /* for KVM_RUN, returned by mmap(vcpu_fd, offset=0) */ struct kvm_run { @@ -181,6 +185,9 @@ struct kvm_run { __u32 data; __u8 is_write; } dcr; + struct { + __u32 suberror; + } internal; /* Fix the size of the union. */ char padding[256]; }; -- cgit v1.2.3 From 54dee9933e8d93589ad63ec3d6be39f1921b0767 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Thu, 11 Jun 2009 12:07:44 -0300 Subject: KVM: VMX: conditionally disable 2M pages Disable usage of 2M pages if VMX_EPT_2MB_PAGE_BIT (bit 16) is clear in MSR_IA32_VMX_EPT_VPID_CAP and EPT is enabled. [avi: s/largepages_disabled/largepages_enabled/ to avoid negative logic] Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity --- include/linux/kvm_host.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index c6e4d02067fe..6988858dc56e 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -224,6 +224,7 @@ int kvm_arch_set_memory_region(struct kvm *kvm, struct kvm_userspace_memory_region *mem, struct kvm_memory_slot old, int user_alloc); +void kvm_disable_largepages(void); void kvm_arch_flush_shadow(struct kvm *kvm); gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn); struct page *gfn_to_page(struct kvm *kvm, gfn_t gfn); -- cgit v1.2.3 From ec04b2604c3707a46db1d26d98f82b11d0844669 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Fri, 19 Jun 2009 15:16:23 +0200 Subject: KVM: Prepare memslot data structures for multiple hugepage sizes [avi: fix build on non-x86] Signed-off-by: Joerg Roedel Signed-off-by: Avi Kivity --- include/linux/kvm_host.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 6988858dc56e..06af936a250a 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -103,7 +103,7 @@ struct kvm_memory_slot { struct { unsigned long rmap_pde; int write_count; - } *lpage_info; + } *lpage_info[KVM_NR_PAGE_SIZES - 1]; unsigned long userspace_addr; int user_alloc; }; -- cgit v1.2.3 From 2023a29cbe34139afcea8f65f8aef78c325c5dc0 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Thu, 18 Jun 2009 11:47:28 -0300 Subject: KVM: remove old KVMTRACE support code Return EOPNOTSUPP for KVM_TRACE_ENABLE/PAUSE/DISABLE ioctls. Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity --- include/linux/kvm.h | 31 +------------------------------ include/linux/kvm_host.h | 31 ------------------------------- 2 files changed, 1 insertion(+), 61 deletions(-) (limited to 'include/linux') diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 671051829da6..76c640834ea6 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -14,7 +14,7 @@ #define KVM_API_VERSION 12 -/* for KVM_TRACE_ENABLE */ +/* for KVM_TRACE_ENABLE, deprecated */ struct kvm_user_trace_setup { __u32 buf_size; /* sub_buffer size of each per-cpu */ __u32 buf_nr; /* the number of sub_buffers of each per-cpu */ @@ -325,35 +325,6 @@ struct kvm_guest_debug { #define KVM_TRC_CYCLE_SIZE 8 #define KVM_TRC_EXTRA_MAX 7 -/* This structure represents a single trace buffer record. */ -struct kvm_trace_rec { - /* variable rec_val - * is split into: - * bits 0 - 27 -> event id - * bits 28 -30 -> number of extra data args of size u32 - * bits 31 -> binary indicator for if tsc is in record - */ - __u32 rec_val; - __u32 pid; - __u32 vcpu_id; - union { - struct { - __u64 timestamp; - __u32 extra_u32[KVM_TRC_EXTRA_MAX]; - } __attribute__((packed)) timestamp; - struct { - __u32 extra_u32[KVM_TRC_EXTRA_MAX]; - } notimestamp; - } u; -}; - -#define TRACE_REC_EVENT_ID(val) \ - (0x0fffffff & (val)) -#define TRACE_REC_NUM_DATA_ARGS(val) \ - (0x70000000 & ((val) << 28)) -#define TRACE_REC_TCS(val) \ - (0x80000000 & ((val) << 31)) - #define KVMIO 0xAE /* diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 06af936a250a..0604d56f6eed 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -482,37 +482,6 @@ struct kvm_stats_debugfs_item { extern struct kvm_stats_debugfs_item debugfs_entries[]; extern struct dentry *kvm_debugfs_dir; -#define KVMTRACE_5D(evt, vcpu, d1, d2, d3, d4, d5, name) \ - trace_mark(kvm_trace_##name, "%u %p %u %u %u %u %u %u", KVM_TRC_##evt, \ - vcpu, 5, d1, d2, d3, d4, d5) -#define KVMTRACE_4D(evt, vcpu, d1, d2, d3, d4, name) \ - trace_mark(kvm_trace_##name, "%u %p %u %u %u %u %u %u", KVM_TRC_##evt, \ - vcpu, 4, d1, d2, d3, d4, 0) -#define KVMTRACE_3D(evt, vcpu, d1, d2, d3, name) \ - trace_mark(kvm_trace_##name, "%u %p %u %u %u %u %u %u", KVM_TRC_##evt, \ - vcpu, 3, d1, d2, d3, 0, 0) -#define KVMTRACE_2D(evt, vcpu, d1, d2, name) \ - trace_mark(kvm_trace_##name, "%u %p %u %u %u %u %u %u", KVM_TRC_##evt, \ - vcpu, 2, d1, d2, 0, 0, 0) -#define KVMTRACE_1D(evt, vcpu, d1, name) \ - trace_mark(kvm_trace_##name, "%u %p %u %u %u %u %u %u", KVM_TRC_##evt, \ - vcpu, 1, d1, 0, 0, 0, 0) -#define KVMTRACE_0D(evt, vcpu, name) \ - trace_mark(kvm_trace_##name, "%u %p %u %u %u %u %u %u", KVM_TRC_##evt, \ - vcpu, 0, 0, 0, 0, 0, 0) - -#ifdef CONFIG_KVM_TRACE -int kvm_trace_ioctl(unsigned int ioctl, unsigned long arg); -void kvm_trace_cleanup(void); -#else -static inline -int kvm_trace_ioctl(unsigned int ioctl, unsigned long arg) -{ - return -EINVAL; -} -#define kvm_trace_cleanup() ((void)0) -#endif - #ifdef KVM_ARCH_WANT_MMU_NOTIFIER static inline int mmu_notifier_retry(struct kvm_vcpu *vcpu, unsigned long mmu_seq) { -- cgit v1.2.3 From d3efc8efdbaa81e9db3089810fcd526fccba234d Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Wed, 17 Jun 2009 10:07:59 -0300 Subject: KVM: use vcpu_id instead of bsp_vcpu pointer in kvm_vcpu_is_bsp Change kvm_vcpu_is_bsp to use vcpu_id instead of bsp_vcpu pointer, which is only initialized at the end of kvm_vm_ioctl_create_vcpu. Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity --- include/linux/kvm_host.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 0604d56f6eed..4ea42c950539 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -538,7 +538,7 @@ static inline void kvm_irqfd_release(struct kvm *kvm) {} #ifdef CONFIG_KVM_APIC_ARCHITECTURE static inline bool kvm_vcpu_is_bsp(struct kvm_vcpu *vcpu) { - return vcpu->kvm->bsp_vcpu == vcpu; + return vcpu->kvm->bsp_vcpu_id == vcpu->vcpu_id; } #endif #endif -- cgit v1.2.3 From 6c474694530f377507f9aca438c17206e051e6e7 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Mon, 29 Jun 2009 22:24:26 +0300 Subject: KVM: convert bus to slots_lock Use slots_lock to protect device list on the bus. slots_lock is already taken for read everywhere, so we only need to take it for write when registering devices. This is in preparation to removing in_range and kvm->lock around it. Signed-off-by: Michael S. Tsirkin Signed-off-by: Avi Kivity --- include/linux/kvm_host.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 4ea42c950539..96c8c0b01929 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -42,6 +42,7 @@ #define KVM_USERSPACE_IRQ_SOURCE_ID 0 +struct kvm; struct kvm_vcpu; extern struct kmem_cache *kvm_vcpu_cache; @@ -61,7 +62,9 @@ void kvm_io_bus_init(struct kvm_io_bus *bus); void kvm_io_bus_destroy(struct kvm_io_bus *bus); struct kvm_io_device *kvm_io_bus_find_dev(struct kvm_io_bus *bus, gpa_t addr, int len, int is_write); -void kvm_io_bus_register_dev(struct kvm_io_bus *bus, +void __kvm_io_bus_register_dev(struct kvm_io_bus *bus, + struct kvm_io_device *dev); +void kvm_io_bus_register_dev(struct kvm *kvm, struct kvm_io_bus *bus, struct kvm_io_device *dev); struct kvm_vcpu { -- cgit v1.2.3 From bda9020e2463ec94db9f97e8615f3bae22069838 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Mon, 29 Jun 2009 22:24:32 +0300 Subject: KVM: remove in_range from io devices This changes bus accesses to use high-level kvm_io_bus_read/kvm_io_bus_write functions. in_range now becomes unused so it is removed from device ops in favor of read/write callbacks performing range checks internally. This allows aliasing (mostly for in-kernel virtio), as well as better error handling by making it possible to pass errors up to userspace. Signed-off-by: Michael S. Tsirkin Signed-off-by: Avi Kivity --- include/linux/kvm_host.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 96c8c0b01929..077e8bb875a9 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -60,8 +60,10 @@ struct kvm_io_bus { void kvm_io_bus_init(struct kvm_io_bus *bus); void kvm_io_bus_destroy(struct kvm_io_bus *bus); -struct kvm_io_device *kvm_io_bus_find_dev(struct kvm_io_bus *bus, - gpa_t addr, int len, int is_write); +int kvm_io_bus_write(struct kvm_io_bus *bus, gpa_t addr, int len, + const void *val); +int kvm_io_bus_read(struct kvm_io_bus *bus, gpa_t addr, int len, + void *val); void __kvm_io_bus_register_dev(struct kvm_io_bus *bus, struct kvm_io_device *dev); void kvm_io_bus_register_dev(struct kvm *kvm, struct kvm_io_bus *bus, -- cgit v1.2.3 From e9f4275732add046fed4a548b8dbb98dbe500d2f Mon Sep 17 00:00:00 2001 From: Beth Kon Date: Tue, 7 Jul 2009 11:50:38 -0400 Subject: KVM: PIT support for HPET legacy mode When kvm is in hpet_legacy_mode, the hpet is providing the timer interrupt and the pit should not be. So in legacy mode, the pit timer is destroyed, but the *state* of the pit is maintained. So if kvm or the guest tries to modify the state of the pit, this modification is accepted, *except* that the timer isn't actually started. When we exit hpet_legacy_mode, the current state of the pit (which is up to date since we've been accepting modifications) is used to restart the pit timer. The saved_mode code in kvm_pit_load_count temporarily changes mode to 0xff in order to destroy the timer, but then restores the actual value, again maintaining "current" state of the pit for possible later reenablement. [avi: add some reserved storage in the ioctl; make SET_PIT2 IOW] [marcelo: fix memory corruption due to reserved storage] Signed-off-by: Beth Kon Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity --- include/linux/kvm.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 76c640834ea6..a74a1fcc28e9 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -409,6 +409,9 @@ struct kvm_guest_debug { #define KVM_CAP_PIT2 33 #endif #define KVM_CAP_SET_BOOT_CPU_ID 34 +#ifdef __KVM_HAVE_PIT_STATE2 +#define KVM_CAP_PIT_STATE2 35 +#endif #ifdef KVM_CAP_IRQ_ROUTING @@ -586,6 +589,9 @@ struct kvm_debug_guest { #define KVM_IA64_VCPU_GET_STACK _IOR(KVMIO, 0x9a, void *) #define KVM_IA64_VCPU_SET_STACK _IOW(KVMIO, 0x9b, void *) +#define KVM_GET_PIT2 _IOR(KVMIO, 0x9f, struct kvm_pit_state2) +#define KVM_SET_PIT2 _IOW(KVMIO, 0xa0, struct kvm_pit_state2) + #define KVM_TRC_INJ_VIRQ (KVM_TRC_HANDLER + 0x02) #define KVM_TRC_REDELIVER_EVT (KVM_TRC_HANDLER + 0x03) #define KVM_TRC_PEND_INTR (KVM_TRC_HANDLER + 0x04) -- cgit v1.2.3 From 090b7aff27120cdae76a346a70db394844fea598 Mon Sep 17 00:00:00 2001 From: Gregory Haskins Date: Tue, 7 Jul 2009 17:08:44 -0400 Subject: KVM: make io_bus interface more robust Today kvm_io_bus_regsiter_dev() returns void and will internally BUG_ON if it fails. We want to create dynamic MMIO/PIO entries driven from userspace later in the series, so we need to enhance the code to be more robust with the following changes: 1) Add a return value to the registration function 2) Fix up all the callsites to check the return code, handle any failures, and percolate the error up to the caller. 3) Add an unregister function that collapses holes in the array Signed-off-by: Gregory Haskins Acked-by: Michael S. Tsirkin Signed-off-by: Avi Kivity --- include/linux/kvm_host.h | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 077e8bb875a9..983b0bdeb3ff 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -64,10 +64,14 @@ int kvm_io_bus_write(struct kvm_io_bus *bus, gpa_t addr, int len, const void *val); int kvm_io_bus_read(struct kvm_io_bus *bus, gpa_t addr, int len, void *val); -void __kvm_io_bus_register_dev(struct kvm_io_bus *bus, +int __kvm_io_bus_register_dev(struct kvm_io_bus *bus, + struct kvm_io_device *dev); +int kvm_io_bus_register_dev(struct kvm *kvm, struct kvm_io_bus *bus, + struct kvm_io_device *dev); +void __kvm_io_bus_unregister_dev(struct kvm_io_bus *bus, + struct kvm_io_device *dev); +void kvm_io_bus_unregister_dev(struct kvm *kvm, struct kvm_io_bus *bus, struct kvm_io_device *dev); -void kvm_io_bus_register_dev(struct kvm *kvm, struct kvm_io_bus *bus, - struct kvm_io_device *dev); struct kvm_vcpu { struct kvm *kvm; -- cgit v1.2.3 From d34e6b175e61821026893ec5298cc8e7558df43a Mon Sep 17 00:00:00 2001 From: Gregory Haskins Date: Tue, 7 Jul 2009 17:08:49 -0400 Subject: KVM: add ioeventfd support ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd signal when written to by a guest. Host userspace can register any arbitrary IO address with a corresponding eventfd and then pass the eventfd to a specific end-point of interest for handling. Normal IO requires a blocking round-trip since the operation may cause side-effects in the emulated model or may return data to the caller. Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM "heavy-weight" exit back to userspace, and is ultimately serviced by qemu's device model synchronously before returning control back to the vcpu. However, there is a subclass of IO which acts purely as a trigger for other IO (such as to kick off an out-of-band DMA request, etc). For these patterns, the synchronous call is particularly expensive since we really only want to simply get our notification transmitted asychronously and return as quickly as possible. All the sychronous infrastructure to ensure proper data-dependencies are met in the normal IO case are just unecessary overhead for signalling. This adds additional computational load on the system, as well as latency to the signalling path. Therefore, we provide a mechanism for registration of an in-kernel trigger point that allows the VCPU to only require a very brief, lightweight exit just long enough to signal an eventfd. This also means that any clients compatible with the eventfd interface (which includes userspace and kernelspace equally well) can now register to be notified. The end result should be a more flexible and higher performance notification API for the backend KVM hypervisor and perhipheral components. To test this theory, we built a test-harness called "doorbell". This module has a function called "doorbell_ring()" which simply increments a counter for each time the doorbell is signaled. It supports signalling from either an eventfd, or an ioctl(). We then wired up two paths to the doorbell: One via QEMU via a registered io region and through the doorbell ioctl(). The other is direct via ioeventfd. You can download this test harness here: ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2 The measured results are as follows: qemu-mmio: 110000 iops, 9.09us rtt ioeventfd-mmio: 200100 iops, 5.00us rtt ioeventfd-pio: 367300 iops, 2.72us rtt I didn't measure qemu-pio, because I have to figure out how to register a PIO region with qemu's device model, and I got lazy. However, for now we can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO, and -350ns for HC, we get: qemu-pio: 153139 iops, 6.53us rtt ioeventfd-hc: 412585 iops, 2.37us rtt these are just for fun, for now, until I can gather more data. Here is a graph for your convenience: http://developer.novell.com/wiki/images/7/76/Iofd-chart.png The conclusion to draw is that we save about 4us by skipping the userspace hop. -------------------- Signed-off-by: Gregory Haskins Acked-by: Michael S. Tsirkin Signed-off-by: Avi Kivity --- include/linux/kvm.h | 24 ++++++++++++++++++++++++ include/linux/kvm_host.h | 10 ++++++++-- 2 files changed, 32 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/kvm.h b/include/linux/kvm.h index a74a1fcc28e9..230a91aa61c9 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -307,6 +307,28 @@ struct kvm_guest_debug { struct kvm_guest_debug_arch arch; }; +enum { + kvm_ioeventfd_flag_nr_datamatch, + kvm_ioeventfd_flag_nr_pio, + kvm_ioeventfd_flag_nr_deassign, + kvm_ioeventfd_flag_nr_max, +}; + +#define KVM_IOEVENTFD_FLAG_DATAMATCH (1 << kvm_ioeventfd_flag_nr_datamatch) +#define KVM_IOEVENTFD_FLAG_PIO (1 << kvm_ioeventfd_flag_nr_pio) +#define KVM_IOEVENTFD_FLAG_DEASSIGN (1 << kvm_ioeventfd_flag_nr_deassign) + +#define KVM_IOEVENTFD_VALID_FLAG_MASK ((1 << kvm_ioeventfd_flag_nr_max) - 1) + +struct kvm_ioeventfd { + __u64 datamatch; + __u64 addr; /* legal pio/mmio address */ + __u32 len; /* 1, 2, 4, or 8 bytes */ + __s32 fd; + __u32 flags; + __u8 pad[36]; +}; + #define KVM_TRC_SHIFT 16 /* * kvm trace categories @@ -412,6 +434,7 @@ struct kvm_guest_debug { #ifdef __KVM_HAVE_PIT_STATE2 #define KVM_CAP_PIT_STATE2 35 #endif +#define KVM_CAP_IOEVENTFD 36 #ifdef KVM_CAP_IRQ_ROUTING @@ -520,6 +543,7 @@ struct kvm_irqfd { #define KVM_IRQFD _IOW(KVMIO, 0x76, struct kvm_irqfd) #define KVM_CREATE_PIT2 _IOW(KVMIO, 0x77, struct kvm_pit_config) #define KVM_SET_BOOT_CPU_ID _IO(KVMIO, 0x78) +#define KVM_IOEVENTFD _IOW(KVMIO, 0x79, struct kvm_ioeventfd) /* * ioctls for vcpu fds diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 983b0bdeb3ff..6ec9fc56a49e 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -155,6 +155,7 @@ struct kvm { spinlock_t lock; struct list_head items; } irqfds; + struct list_head ioeventfds; #endif struct kvm_vm_stat stat; struct kvm_arch arch; @@ -528,19 +529,24 @@ static inline void kvm_free_irq_routing(struct kvm *kvm) {} #ifdef CONFIG_HAVE_KVM_EVENTFD -void kvm_irqfd_init(struct kvm *kvm); +void kvm_eventfd_init(struct kvm *kvm); int kvm_irqfd(struct kvm *kvm, int fd, int gsi, int flags); void kvm_irqfd_release(struct kvm *kvm); +int kvm_ioeventfd(struct kvm *kvm, struct kvm_ioeventfd *args); #else -static inline void kvm_irqfd_init(struct kvm *kvm) {} +static inline void kvm_eventfd_init(struct kvm *kvm) {} static inline int kvm_irqfd(struct kvm *kvm, int fd, int gsi, int flags) { return -EINVAL; } static inline void kvm_irqfd_release(struct kvm *kvm) {} +static inline int kvm_ioeventfd(struct kvm *kvm, struct kvm_ioeventfd *args) +{ + return -ENOSYS; +} #endif /* CONFIG_HAVE_KVM_EVENTFD */ -- cgit v1.2.3 From 0b71785dc05f1f66e6268022b9953c0d6a9985c6 Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Thu, 9 Jul 2009 15:33:53 +0300 Subject: KVM: Move kvm_cpu_get_interrupt() declaration to x86 code It is implemented only by x86. Signed-off-by: Gleb Natapov Signed-off-by: Avi Kivity --- include/linux/kvm_host.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 6ec9fc56a49e..2c6a5f008746 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -341,7 +341,6 @@ void kvm_arch_destroy_vm(struct kvm *kvm); void kvm_free_all_assigned_devices(struct kvm *kvm); void kvm_arch_sync_events(struct kvm *kvm); -int kvm_cpu_get_interrupt(struct kvm_vcpu *v); int kvm_cpu_has_interrupt(struct kvm_vcpu *v); int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu); void kvm_vcpu_kick(struct kvm_vcpu *vcpu); -- cgit v1.2.3 From a1b37100d9e29c1f8dc3e2f5490a205c80180e01 Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Thu, 9 Jul 2009 15:33:52 +0300 Subject: KVM: Reduce runnability interface with arch support code Remove kvm_cpu_has_interrupt() and kvm_arch_interrupt_allowed() from interface between general code and arch code. kvm_arch_vcpu_runnable() checks for interrupts instead. Signed-off-by: Gleb Natapov Signed-off-by: Avi Kivity --- include/linux/kvm_host.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 2c6a5f008746..4af56036a6bf 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -332,7 +332,6 @@ int kvm_arch_hardware_setup(void); void kvm_arch_hardware_unsetup(void); void kvm_arch_check_processor_compat(void *rtn); int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu); -int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu); void kvm_free_physmem(struct kvm *kvm); @@ -341,7 +340,6 @@ void kvm_arch_destroy_vm(struct kvm *kvm); void kvm_free_all_assigned_devices(struct kvm *kvm); void kvm_arch_sync_events(struct kvm *kvm); -int kvm_cpu_has_interrupt(struct kvm_vcpu *v); int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu); void kvm_vcpu_kick(struct kvm_vcpu *vcpu); -- cgit v1.2.3 From b927a3cec081a605142f5b7e90b730611bee28b1 Mon Sep 17 00:00:00 2001 From: Sheng Yang Date: Tue, 21 Jul 2009 10:42:48 +0800 Subject: KVM: VMX: Introduce KVM_SET_IDENTITY_MAP_ADDR ioctl Now KVM allow guest to modify guest's physical address of EPT's identity mapping page. (change from v1, discard unnecessary check, change ioctl to accept parameter address rather than value) Signed-off-by: Sheng Yang Signed-off-by: Marcelo Tosatti --- include/linux/kvm.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 230a91aa61c9..f8f8900fc5ec 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -435,6 +435,7 @@ struct kvm_ioeventfd { #define KVM_CAP_PIT_STATE2 35 #endif #define KVM_CAP_IOEVENTFD 36 +#define KVM_CAP_SET_IDENTITY_MAP_ADDR 37 #ifdef KVM_CAP_IRQ_ROUTING @@ -512,6 +513,7 @@ struct kvm_irqfd { #define KVM_SET_USER_MEMORY_REGION _IOW(KVMIO, 0x46,\ struct kvm_userspace_memory_region) #define KVM_SET_TSS_ADDR _IO(KVMIO, 0x47) +#define KVM_SET_IDENTITY_MAP_ADDR _IOW(KVMIO, 0x48, __u64) /* Device model IOC */ #define KVM_CREATE_IRQCHIP _IO(KVMIO, 0x60) #define KVM_IRQ_LINE _IOW(KVMIO, 0x61, struct kvm_irq_level) -- cgit v1.2.3 From 07708c4af1346ab1521b26a202f438366b7bcffd Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Mon, 3 Aug 2009 18:43:28 +0200 Subject: KVM: x86: Disallow hypercalls for guest callers in rings > 0 So far unprivileged guest callers running in ring 3 can issue, e.g., MMU hypercalls. Normally, such callers cannot provide any hand-crafted MMU command structure as it has to be passed by its physical address, but they can still crash the guest kernel by passing random addresses. To close the hole, this patch considers hypercalls valid only if issued from guest ring 0. This may still be relaxed on a per-hypercall base in the future once required. Cc: stable@kernel.org Signed-off-by: Jan Kiszka Signed-off-by: Avi Kivity --- include/linux/kvm_para.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/kvm_para.h b/include/linux/kvm_para.h index 3ddce03766ca..d73109243fda 100644 --- a/include/linux/kvm_para.h +++ b/include/linux/kvm_para.h @@ -13,6 +13,7 @@ #define KVM_ENOSYS 1000 #define KVM_EFAULT EFAULT #define KVM_E2BIG E2BIG +#define KVM_EPERM EPERM #define KVM_HC_VAPIC_POLL_IRQ 1 #define KVM_HC_MMU_OP 2 -- cgit v1.2.3 From da18acffc3f13c4f187c20bc5dcfcb110b374b48 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Mon, 10 Aug 2009 15:59:25 +0300 Subject: KVM: export kvm_para.h kvm_para.h contains userspace interface and so should be exported. Signed-off-by: Michael S. Tsirkin Signed-off-by: Avi Kivity --- include/linux/Kbuild | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 334a3593cdfd..cff4a101f266 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -268,6 +268,10 @@ ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \ $(srctree)/include/asm-$(SRCARCH)/kvm.h),) unifdef-y += kvm.h endif +ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h \ + $(srctree)/include/asm-$(SRCARCH)/kvm_para.h),) +unifdef-y += kvm_para.h +endif unifdef-y += llc.h unifdef-y += loop.h unifdef-y += lp.h -- cgit v1.2.3 From 1a5aeeecd550ee4344cfba1791f1134739b16dc6 Mon Sep 17 00:00:00 2001 From: Maciej Sosnowski Date: Thu, 10 Sep 2009 15:05:58 +0200 Subject: dca: registering requesters in multiple dca domains This patch enables DCA support on multiple-IOH/multiple-IIO architectures. It modifies dca module by replacing single dca_providers list with dca_domains list, each domain containing separate list of providers. This approach lets dca driver manage multiple domains, i.e. sets of providers and requesters mapped back to the same PCI root complex device. The driver takes care to register each requester to a provider from the same domain. Signed-off-by: Dan Williams Signed-off-by: Maciej Sosnowski --- include/linux/dca.h | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/dca.h b/include/linux/dca.h index 9c20c7e87d0a..d27a7a05718d 100644 --- a/include/linux/dca.h +++ b/include/linux/dca.h @@ -20,6 +20,9 @@ */ #ifndef DCA_H #define DCA_H + +#include + /* DCA Provider API */ /* DCA Notifier Interface */ @@ -36,6 +39,12 @@ struct dca_provider { int id; }; +struct dca_domain { + struct list_head node; + struct list_head dca_providers; + struct pci_bus *pci_rc; +}; + struct dca_ops { int (*add_requester) (struct dca_provider *, struct device *); int (*remove_requester) (struct dca_provider *, struct device *); @@ -47,7 +56,7 @@ struct dca_ops { struct dca_provider *alloc_dca_provider(struct dca_ops *ops, int priv_size); void free_dca_provider(struct dca_provider *dca); int register_dca_provider(struct dca_provider *dca, struct device *dev); -void unregister_dca_provider(struct dca_provider *dca); +void unregister_dca_provider(struct dca_provider *dca, struct device *dev); static inline void *dca_priv(struct dca_provider *dca) { -- cgit v1.2.3 From a82afdfcb8c0df09776b6458af6b68fc58b2e87b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 3 Jul 2009 17:48:16 +0900 Subject: block: use the same failfast bits for bio and request bio and request use the same set of failfast bits. This patch makes the following changes to simplify things. * enumify BIO_RW* bits and reorder bits such that BIOS_RW_FAILFAST_* bits coincide with __REQ_FAILFAST_* bits. * The above pushes BIO_RW_AHEAD out of sync with __REQ_FAILFAST_DEV but the matching is useless anyway. init_request_from_bio() is responsible for setting FAILFAST bits on FS requests and non-FS requests never use BIO_RW_AHEAD. Drop the code and comment from blk_rq_bio_prep(). * Define REQ_FAILFAST_MASK which is OR of all FAILFAST bits and simplify FAILFAST flags handling in init_request_from_bio(). Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- include/linux/bio.h | 43 +++++++++++++++++++++++-------------------- include/linux/blkdev.h | 4 ++++ 2 files changed, 27 insertions(+), 20 deletions(-) (limited to 'include/linux') diff --git a/include/linux/bio.h b/include/linux/bio.h index 2892b710771c..a299ed38fcd7 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -142,37 +142,40 @@ struct bio { * * bit 0 -- data direction * If not set, bio is a read from device. If set, it's a write to device. - * bit 1 -- rw-ahead when set - * bit 2 -- barrier + * bit 1 -- fail fast device errors + * bit 2 -- fail fast transport errors + * bit 3 -- fail fast driver errors + * bit 4 -- rw-ahead when set + * bit 5 -- barrier * Insert a serialization point in the IO queue, forcing previously * submitted IO to be completed before this one is issued. - * bit 3 -- synchronous I/O hint. - * bit 4 -- Unplug the device immediately after submitting this bio. - * bit 5 -- metadata request + * bit 6 -- synchronous I/O hint. + * bit 7 -- Unplug the device immediately after submitting this bio. + * bit 8 -- metadata request * Used for tracing to differentiate metadata and data IO. May also * get some preferential treatment in the IO scheduler - * bit 6 -- discard sectors + * bit 9 -- discard sectors * Informs the lower level device that this range of sectors is no longer * used by the file system and may thus be freed by the device. Used * for flash based storage. - * bit 7 -- fail fast device errors - * bit 8 -- fail fast transport errors - * bit 9 -- fail fast driver errors * Don't want driver retries for any fast fail whatever the reason. * bit 10 -- Tell the IO scheduler not to wait for more requests after this one has been submitted, even if it is a SYNC request. */ -#define BIO_RW 0 /* Must match RW in req flags (blkdev.h) */ -#define BIO_RW_AHEAD 1 /* Must match FAILFAST in req flags */ -#define BIO_RW_BARRIER 2 -#define BIO_RW_SYNCIO 3 -#define BIO_RW_UNPLUG 4 -#define BIO_RW_META 5 -#define BIO_RW_DISCARD 6 -#define BIO_RW_FAILFAST_DEV 7 -#define BIO_RW_FAILFAST_TRANSPORT 8 -#define BIO_RW_FAILFAST_DRIVER 9 -#define BIO_RW_NOIDLE 10 +enum bio_rw_flags { + BIO_RW, + BIO_RW_FAILFAST_DEV, + BIO_RW_FAILFAST_TRANSPORT, + BIO_RW_FAILFAST_DRIVER, + /* above flags must match REQ_* */ + BIO_RW_AHEAD, + BIO_RW_BARRIER, + BIO_RW_SYNCIO, + BIO_RW_UNPLUG, + BIO_RW_META, + BIO_RW_DISCARD, + BIO_RW_NOIDLE, +}; #define bio_rw_flagged(bio, flag) ((bio)->bi_rw & (1 << (flag))) diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 69103e053c92..c3015736d814 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -93,6 +93,7 @@ enum rq_flag_bits { __REQ_FAILFAST_DEV, /* no driver retries of device errors */ __REQ_FAILFAST_TRANSPORT, /* no driver retries of transport errors */ __REQ_FAILFAST_DRIVER, /* no driver retries of driver errors */ + /* above flags must match BIO_RW_* */ __REQ_DISCARD, /* request to discard sectors */ __REQ_SORTED, /* elevator knows about this request */ __REQ_SOFTBARRIER, /* may not be passed by ioscheduler */ @@ -143,6 +144,9 @@ enum rq_flag_bits { #define REQ_NOIDLE (1 << __REQ_NOIDLE) #define REQ_IO_STAT (1 << __REQ_IO_STAT) +#define REQ_FAILFAST_MASK (REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | \ + REQ_FAILFAST_DRIVER) + #define BLK_MAX_CDB 16 /* -- cgit v1.2.3 From 80a761fd33cf812f771e212139157bf8f58d4b3f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 3 Jul 2009 17:48:17 +0900 Subject: block: implement mixed merge of different failfast requests Failfast has characteristics from other attributes. When issuing, executing and successuflly completing requests, failfast doesn't make any difference. It only affects how a request is handled on failure. Allowing requests with different failfast settings to be merged cause normal IOs to fail prematurely while not allowing has performance penalties as failfast is used for read aheads which are likely to be located near in-flight or to-be-issued normal IOs. This patch introduces the concept of 'mixed merge'. A request is a mixed merge if it is merge of segments which require different handling on failure. Currently the only mixable attributes are failfast ones (or lack thereof). When a bio with different failfast settings is added to an existing request or requests of different failfast settings are merged, the merged request is marked mixed. Each bio carries failfast settings and the request always tracks failfast state of the first bio. When the request fails, blk_rq_err_bytes() can be used to determine how many bytes can be safely failed without crossing into an area which requires further retrials. This allows request merging regardless of failfast settings while keeping the failure handling correct. This patch only implements mixed merge but doesn't enable it. The next one will update SCSI to make use of mixed merge. Signed-off-by: Tejun Heo Cc: Niel Lambrechts Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index c3015736d814..650b6a9cb679 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -115,6 +115,7 @@ enum rq_flag_bits { __REQ_INTEGRITY, /* integrity metadata has been remapped */ __REQ_NOIDLE, /* Don't anticipate more IO after this one */ __REQ_IO_STAT, /* account I/O stat */ + __REQ_MIXED_MERGE, /* merge of different types, fail separately */ __REQ_NR_BITS, /* stops here */ }; @@ -143,6 +144,7 @@ enum rq_flag_bits { #define REQ_INTEGRITY (1 << __REQ_INTEGRITY) #define REQ_NOIDLE (1 << __REQ_NOIDLE) #define REQ_IO_STAT (1 << __REQ_IO_STAT) +#define REQ_MIXED_MERGE (1 << __REQ_MIXED_MERGE) #define REQ_FAILFAST_MASK (REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | \ REQ_FAILFAST_DRIVER) @@ -832,11 +834,13 @@ static inline void blk_run_address_space(struct address_space *mapping) } /* - * blk_rq_pos() : the current sector - * blk_rq_bytes() : bytes left in the entire request - * blk_rq_cur_bytes() : bytes left in the current segment - * blk_rq_sectors() : sectors left in the entire request - * blk_rq_cur_sectors() : sectors left in the current segment + * blk_rq_pos() : the current sector + * blk_rq_bytes() : bytes left in the entire request + * blk_rq_cur_bytes() : bytes left in the current segment + * blk_rq_err_bytes() : bytes left till the next error boundary + * blk_rq_sectors() : sectors left in the entire request + * blk_rq_cur_sectors() : sectors left in the current segment + * blk_rq_err_sectors() : sectors left till the next error boundary */ static inline sector_t blk_rq_pos(const struct request *rq) { @@ -853,6 +857,8 @@ static inline int blk_rq_cur_bytes(const struct request *rq) return rq->bio ? bio_cur_bytes(rq->bio) : 0; } +extern unsigned int blk_rq_err_bytes(const struct request *rq); + static inline unsigned int blk_rq_sectors(const struct request *rq) { return blk_rq_bytes(rq) >> 9; @@ -863,6 +869,11 @@ static inline unsigned int blk_rq_cur_sectors(const struct request *rq) return blk_rq_cur_bytes(rq) >> 9; } +static inline unsigned int blk_rq_err_sectors(const struct request *rq) +{ + return blk_rq_err_bytes(rq) >> 9; +} + /* * Request issue related functions. */ @@ -889,10 +900,12 @@ extern bool blk_end_request(struct request *rq, int error, unsigned int nr_bytes); extern void blk_end_request_all(struct request *rq, int error); extern bool blk_end_request_cur(struct request *rq, int error); +extern bool blk_end_request_err(struct request *rq, int error); extern bool __blk_end_request(struct request *rq, int error, unsigned int nr_bytes); extern void __blk_end_request_all(struct request *rq, int error); extern bool __blk_end_request_cur(struct request *rq, int error); +extern bool __blk_end_request_err(struct request *rq, int error); extern void blk_complete_request(struct request *); extern void __blk_complete_request(struct request *); -- cgit v1.2.3 From e7e503aedb1f4d165081cb8d47a58c38f80f0cb4 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 28 Jul 2009 10:15:30 +0200 Subject: block: make bio_rw_flagged() return a bool Makes for a saner interface, instead of returning the bit position. Signed-off-by: Jens Axboe --- include/linux/bio.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/bio.h b/include/linux/bio.h index a299ed38fcd7..4f8fd0221cd2 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -177,7 +177,10 @@ enum bio_rw_flags { BIO_RW_NOIDLE, }; -#define bio_rw_flagged(bio, flag) ((bio)->bi_rw & (1 << (flag))) +static inline bool bio_rw_flagged(struct bio *bio, enum bio_rw_flags flag) +{ + return (bio->bi_rw & (1 << flag)) != 0; +} /* * Old defines, these should eventually be replaced by direct usage of -- cgit v1.2.3 From 1f98a13f623e0ef666690a18c1250335fc6d7ef1 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 11 Sep 2009 14:32:04 +0200 Subject: bio: first step in sanitizing the bio->bi_rw flag testing Get rid of any functions that test for these bits and make callers use bio_rw_flagged() directly. Then it is at least directly apparent what variable and flag they check. Signed-off-by: Jens Axboe --- include/linux/bio.h | 25 +++++++------------------ include/linux/blkdev.h | 2 +- 2 files changed, 8 insertions(+), 19 deletions(-) (limited to 'include/linux') diff --git a/include/linux/bio.h b/include/linux/bio.h index 4f8fd0221cd2..5be93f18d842 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -177,28 +177,17 @@ enum bio_rw_flags { BIO_RW_NOIDLE, }; +/* + * First four bits must match between bio->bi_rw and rq->cmd_flags, make + * that explicit here. + */ +#define BIO_RW_RQ_MASK 0xf + static inline bool bio_rw_flagged(struct bio *bio, enum bio_rw_flags flag) { return (bio->bi_rw & (1 << flag)) != 0; } -/* - * Old defines, these should eventually be replaced by direct usage of - * bio_rw_flagged() - */ -#define bio_barrier(bio) bio_rw_flagged(bio, BIO_RW_BARRIER) -#define bio_sync(bio) bio_rw_flagged(bio, BIO_RW_SYNCIO) -#define bio_unplug(bio) bio_rw_flagged(bio, BIO_RW_UNPLUG) -#define bio_failfast_dev(bio) bio_rw_flagged(bio, BIO_RW_FAILFAST_DEV) -#define bio_failfast_transport(bio) \ - bio_rw_flagged(bio, BIO_RW_FAILFAST_TRANSPORT) -#define bio_failfast_driver(bio) \ - bio_rw_flagged(bio, BIO_RW_FAILFAST_DRIVER) -#define bio_rw_ahead(bio) bio_rw_flagged(bio, BIO_RW_AHEAD) -#define bio_rw_meta(bio) bio_rw_flagged(bio, BIO_RW_META) -#define bio_discard(bio) bio_rw_flagged(bio, BIO_RW_DISCARD) -#define bio_noidle(bio) bio_rw_flagged(bio, BIO_RW_NOIDLE) - /* * upper 16 bits of bi_rw define the io priority of this bio */ @@ -222,7 +211,7 @@ static inline bool bio_rw_flagged(struct bio *bio, enum bio_rw_flags flag) #define bio_offset(bio) bio_iovec((bio))->bv_offset #define bio_segments(bio) ((bio)->bi_vcnt - (bio)->bi_idx) #define bio_sectors(bio) ((bio)->bi_size >> 9) -#define bio_empty_barrier(bio) (bio_barrier(bio) && !bio_has_data(bio) && !bio_discard(bio)) +#define bio_empty_barrier(bio) (bio_rw_flagged(bio, BIO_RW_BARRIER) && !bio_has_data(bio) && !bio_rw_flagged(bio, BIO_RW_DISCARD)) static inline unsigned int bio_cur_bytes(struct bio *bio) { diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 650b6a9cb679..88edb62def82 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -86,7 +86,7 @@ enum { }; /* - * request type modified bits. first two bits match BIO_RW* bits, important + * request type modified bits. first four bits match BIO_RW* bits, important */ enum rq_flag_bits { __REQ_RW, /* not set, read. set, write */ -- cgit v1.2.3 From fb1e75389bd06fd5987e9cda1b4e0305c782f854 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 30 Jul 2009 08:18:24 +0200 Subject: block: improve queue_should_plug() by looking at IO depths Instead of just checking whether this device uses block layer tagging, we can improve the detection by looking at the maximum queue depth it has reached. If that crosses 4, then deem it a queuing device. This is important on high IOPS devices, since plugging hurts the performance there (it can be as much as 10-15% of the sys time). Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 88edb62def82..98b45633a27e 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -459,6 +459,7 @@ struct request_queue #define QUEUE_FLAG_NONROT 14 /* non-rotational device (SSD) */ #define QUEUE_FLAG_VIRT QUEUE_FLAG_NONROT /* paravirt device */ #define QUEUE_FLAG_IO_STAT 15 /* do IO stats */ +#define QUEUE_FLAG_CQ 16 /* hardware does queuing */ #define QUEUE_FLAG_DEFAULT ((1 << QUEUE_FLAG_IO_STAT) | \ (1 << QUEUE_FLAG_CLUSTER) | \ @@ -581,6 +582,7 @@ enum { #define blk_queue_plugged(q) test_bit(QUEUE_FLAG_PLUGGED, &(q)->queue_flags) #define blk_queue_tagged(q) test_bit(QUEUE_FLAG_QUEUED, &(q)->queue_flags) +#define blk_queue_queuing(q) test_bit(QUEUE_FLAG_CQ, &(q)->queue_flags) #define blk_queue_stopped(q) test_bit(QUEUE_FLAG_STOPPED, &(q)->queue_flags) #define blk_queue_nomerges(q) test_bit(QUEUE_FLAG_NOMERGES, &(q)->queue_flags) #define blk_queue_nonrot(q) test_bit(QUEUE_FLAG_NONROT, &(q)->queue_flags) -- cgit v1.2.3 From 5e605b64a183a6c0e84cdb99a6f8acb1f8200437 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 5 Aug 2009 09:07:21 +0200 Subject: block: add blk-iopoll, a NAPI like approach for block devices This borrows some code from NAPI and implements a polled completion mode for block devices. The idea is the same as NAPI - instead of doing the command completion when the irq occurs, schedule a dedicated softirq in the hopes that we will complete more IO when the iopoll handler is invoked. Devices have a budget of commands assigned, and will stay in polled mode as long as they continue to consume their budget from the iopoll softirq handler. If they do not, the device is set back to interrupt completion mode. This patch holds the core bits for blk-iopoll, device driver support sold separately. Signed-off-by: Jens Axboe --- include/linux/blk-iopoll.h | 41 +++++++++++++++++++++++++++++++++++++++++ include/linux/interrupt.h | 1 + 2 files changed, 42 insertions(+) create mode 100644 include/linux/blk-iopoll.h (limited to 'include/linux') diff --git a/include/linux/blk-iopoll.h b/include/linux/blk-iopoll.h new file mode 100644 index 000000000000..b2e1739a2e7b --- /dev/null +++ b/include/linux/blk-iopoll.h @@ -0,0 +1,41 @@ +#ifndef BLK_IOPOLL_H +#define BLK_IOPOLL_H + +struct blk_iopoll; +typedef int (blk_iopoll_fn)(struct blk_iopoll *, int); + +struct blk_iopoll { + struct list_head list; + unsigned long state; + unsigned long data; + int weight; + int max; + blk_iopoll_fn *poll; +}; + +enum { + IOPOLL_F_SCHED = 0, + IOPOLL_F_DISABLE = 1, +}; + +static inline int blk_iopoll_sched_prep(struct blk_iopoll *iop) +{ + return !test_bit(IOPOLL_F_DISABLE, &iop->state) && + !test_and_set_bit(IOPOLL_F_SCHED, &iop->state); +} + +static inline int blk_iopoll_disable_pending(struct blk_iopoll *iop) +{ + return test_bit(IOPOLL_F_DISABLE, &iop->state); +} + +extern void blk_iopoll_sched(struct blk_iopoll *); +extern void blk_iopoll_init(struct blk_iopoll *, int, blk_iopoll_fn *); +extern void blk_iopoll_complete(struct blk_iopoll *); +extern void __blk_iopoll_complete(struct blk_iopoll *); +extern void blk_iopoll_enable(struct blk_iopoll *); +extern void blk_iopoll_disable(struct blk_iopoll *); + +extern int blk_iopoll_enabled; + +#endif diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index 35e7df1e9f30..edd8d5c90394 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -344,6 +344,7 @@ enum NET_TX_SOFTIRQ, NET_RX_SOFTIRQ, BLOCK_SOFTIRQ, + BLOCK_IOPOLL_SOFTIRQ, TASKLET_SOFTIRQ, SCHED_SOFTIRQ, HRTIMER_SOFTIRQ, -- cgit v1.2.3 From d62f843b295393124970d29316344150c7de009b Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 11 Aug 2009 08:31:14 +0200 Subject: block: make blk_iopoll_prep_sched() follow normal 0/1 return convention Return 0 if we successfully marked this iopoll structure as ours for scheduling, instead of 1. Signed-off-by: Jens Axboe --- include/linux/blk-iopoll.h | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/blk-iopoll.h b/include/linux/blk-iopoll.h index b2e1739a2e7b..308734d3d4a2 100644 --- a/include/linux/blk-iopoll.h +++ b/include/linux/blk-iopoll.h @@ -18,10 +18,17 @@ enum { IOPOLL_F_DISABLE = 1, }; +/* + * Returns 0 if we successfully set the IOPOLL_F_SCHED bit, indicating + * that we were the first to acquire this iop for scheduling. If this iop + * is currently disabled, return "failure". + */ static inline int blk_iopoll_sched_prep(struct blk_iopoll *iop) { - return !test_bit(IOPOLL_F_DISABLE, &iop->state) && - !test_and_set_bit(IOPOLL_F_SCHED, &iop->state); + if (!test_bit(IOPOLL_F_DISABLE, &iop->state)) + return test_and_set_bit(IOPOLL_F_SCHED, &iop->state); + + return 1; } static inline int blk_iopoll_disable_pending(struct blk_iopoll *iop) -- cgit v1.2.3 From 01e97f6b897bf06ec83375d691f2f4d57f5b3a09 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 3 Sep 2009 20:06:47 +0200 Subject: block: enable rq CPU completion affinity by default Test results here look good, and on big OLTP runs it has also shown to significantly increase cycles attributed to the database and cause a performance boost. Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 98b45633a27e..8bf1a10e4d88 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -463,7 +463,8 @@ struct request_queue #define QUEUE_FLAG_DEFAULT ((1 << QUEUE_FLAG_IO_STAT) | \ (1 << QUEUE_FLAG_CLUSTER) | \ - (1 << QUEUE_FLAG_STACKABLE)) + (1 << QUEUE_FLAG_STACKABLE) | \ + (1 << QUEUE_FLAG_SAME_COMP)) static inline int queue_is_locked(struct request_queue *q) { -- cgit v1.2.3 From 48659d31195bb76d688e99dabd816c5472fb1656 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 11 Sep 2009 11:36:23 -0400 Subject: tracing: move tgid out of generic entry and into userstack The userstack trace required the recording of the tgid entry. Unfortunately, it was added to the generic entry where it wasted 4 bytes of every entry and was only used by one entry. This patch moves it out of the generic field and moves it into the only user (userstack_entry). Signed-off-by: Steven Rostedt --- include/linux/ftrace_event.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h index 23f7179bf74e..06c795b536c2 100644 --- a/include/linux/ftrace_event.h +++ b/include/linux/ftrace_event.h @@ -34,7 +34,6 @@ struct trace_entry { unsigned char flags; unsigned char preempt_count; int pid; - int tgid; }; #define FTRACE_MAX_EVENT \ -- cgit v1.2.3 From 074835f0143b83845af5044af2739c52c9f53808 Mon Sep 17 00:00:00 2001 From: Youquan Song Date: Wed, 9 Sep 2009 12:05:39 -0400 Subject: intel-iommu: Fix kernel hang if interrupt remapping disabled in BIOS BIOS clear DMAR table INTR_REMAP flag to disable interrupt remapping. Current kernel only check interrupt remapping(IR) flag in DRHD's extended capability register to decide interrupt remapping support or not. But IR flag will not change when BIOS disable/enable interrupt remapping. When user disable interrupt remapping in BIOS or BIOS often defaultly disable interrupt remapping feature when BIOS is not mature.Though BIOS disable interrupt remapping but intr_remapping_supported function will always report to OS support interrupt remapping if VT-d2 chipset populated. On this cases, kernel will continue enable interrupt remapping and result kernel panic. This bug exist on almost all platforms with interrupt remapping support. This patch add DMAR table INTR_REMAP flag check before enable interrupt remapping. Signed-off-by: Youquan Song Signed-off-by: David Woodhouse --- include/linux/intel-iommu.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h index 482dc91fd53a..4f0a72a9740c 100644 --- a/include/linux/intel-iommu.h +++ b/include/linux/intel-iommu.h @@ -360,4 +360,6 @@ extern void qi_flush_dev_iotlb(struct intel_iommu *iommu, u16 sid, u16 qdep, extern int qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu); +extern int dmar_ir_support(void); + #endif -- cgit v1.2.3 From 52a7a1cec88acdaf3f8b36a6b1fe904f6eca7ee5 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 10 Sep 2009 15:26:30 +0200 Subject: [ARM] pxafb: add accelerator ID for PXA3xx GCU Add ID 99 for PXA3xx frame buffers and report it in the pxa frame buffer conditionally, depending on a new flag in struct pxafb_mach_info. Signed-off-by: Daniel Mack Cc: linux-fbdev-devel@lists.sourceforge.net Cc: Dennis Oliver Kropp Cc: Sven Neumann Cc: Guennadi Liakhovetski Signed-off-by: Eric Miao --- include/linux/fb.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/fb.h b/include/linux/fb.h index f847df9e99b6..a34bdf5a9d23 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -133,6 +133,7 @@ struct dentry; #define FB_ACCEL_NEOMAGIC_NM2230 96 /* NeoMagic NM2230 */ #define FB_ACCEL_NEOMAGIC_NM2360 97 /* NeoMagic NM2360 */ #define FB_ACCEL_NEOMAGIC_NM2380 98 /* NeoMagic NM2380 */ +#define FB_ACCEL_PXA3XX 99 /* PXA3xx */ #define FB_ACCEL_SAVAGE4 0x80 /* S3 Savage4 */ #define FB_ACCEL_SAVAGE3D 0x81 /* S3 Savage3D */ -- cgit v1.2.3 From 637e7e864103a7a68c1ce43ada27dfc25c0d113f Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 11 Sep 2009 13:55:35 -0400 Subject: tracing: add lock depth to entries This patch adds the lock depth of the big kernel lock to the generic entry header. This way we can see the depth of the lock and help in removing the BKL. Example: # _------=> CPU# # / _-----=> irqs-off # | / _----=> need-resched # || / _---=> hardirq/softirq # ||| / _--=> preempt-depth # |||| /_--=> lock-depth # |||||/ delay # cmd pid |||||| time | caller # \ / |||||| \ | / -0 2.N..3 5902255250us+: lock_acquire: read rcu_read_lock -0 2.N..3 5902255253us+: lock_release: rcu_read_lock -0 2dN..3 5902255257us+: lock_acquire: xtime_lock -0 2dN..4 5902255259us : lock_acquire: clocksource_lock -0 2dN..4 5902255261us+: lock_release: clocksource_lock Signed-off-by: Steven Rostedt --- include/linux/ftrace_event.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h index 06c795b536c2..0608b0ff2635 100644 --- a/include/linux/ftrace_event.h +++ b/include/linux/ftrace_event.h @@ -34,6 +34,7 @@ struct trace_entry { unsigned char flags; unsigned char preempt_count; int pid; + int lock_depth; }; #define FTRACE_MAX_EVENT \ -- cgit v1.2.3 From 4cfc7e6019caa3e97d2a81c48c8d575d7b38d751 Mon Sep 17 00:00:00 2001 From: Rahul Iyer Date: Thu, 10 Sep 2009 17:32:28 +0300 Subject: nfsd41: sunrpc: Added rpc server-side backchannel handling When the call direction is a reply, copy the xid and call direction into the req->rq_private_buf.head[0].iov_base otherwise rpc_verify_header returns rpc_garbage. Signed-off-by: Rahul Iyer Signed-off-by: Mike Sager Signed-off-by: Marc Eshel Signed-off-by: Benny Halevy Signed-off-by: Ricardo Labiaga Signed-off-by: Andy Adamson Signed-off-by: Benny Halevy [get rid of CONFIG_NFSD_V4_1] [sunrpc: refactoring of svc_tcp_recvfrom] [nfsd41: sunrpc: create common send routine for the fore and the back channels] [nfsd41: sunrpc: Use free_page() to free server backchannel pages] [nfsd41: sunrpc: Document server backchannel locking] [nfsd41: sunrpc: remove bc_connect_worker()] [nfsd41: sunrpc: Define xprt_server_backchannel()[ [nfsd41: sunrpc: remove bc_close and bc_init_auto_disconnect dummy functions] [nfsd41: sunrpc: eliminate unneeded switch statement in xs_setup_tcp()] [nfsd41: sunrpc: Don't auto close the server backchannel connection] [nfsd41: sunrpc: Remove unused functions] Signed-off-by: Alexandros Batsakis Signed-off-by: Ricardo Labiaga Signed-off-by: Benny Halevy [nfsd41: change bc_sock to bc_xprt] [nfsd41: sunrpc: move struct rpc_buffer def into a common header file] [nfsd41: sunrpc: use rpc_sleep in bc_send_request so not to block on mutex] [removed cosmetic changes] Signed-off-by: Benny Halevy [sunrpc: add new xprt class for nfsv4.1 backchannel] [sunrpc: v2.1 change handling of auto_close and init_auto_disconnect operations for the nfsv4.1 backchannel] Signed-off-by: Alexandros Batsakis [reverted more cosmetic leftovers] [got rid of xprt_server_backchannel] [separated "nfsd41: sunrpc: add new xprt class for nfsv4.1 backchannel"] Signed-off-by: Benny Halevy Cc: Trond Myklebust [sunrpc: change idle timeout value for the backchannel] Signed-off-by: Alexandros Batsakis Signed-off-by: Benny Halevy Acked-by: Trond Myklebust Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/svc_xprt.h | 1 + include/linux/sunrpc/svcsock.h | 1 + include/linux/sunrpc/xprt.h | 1 + 3 files changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sunrpc/svc_xprt.h b/include/linux/sunrpc/svc_xprt.h index 2223ae0b5ed5..5f4e18b3ce73 100644 --- a/include/linux/sunrpc/svc_xprt.h +++ b/include/linux/sunrpc/svc_xprt.h @@ -65,6 +65,7 @@ struct svc_xprt { size_t xpt_locallen; /* length of address */ struct sockaddr_storage xpt_remote; /* remote peer's address */ size_t xpt_remotelen; /* length of address */ + struct rpc_wait_queue xpt_bc_pending; /* backchannel wait queue */ }; int svc_reg_xprt_class(struct svc_xprt_class *); diff --git a/include/linux/sunrpc/svcsock.h b/include/linux/sunrpc/svcsock.h index 04dba23c59f2..1b353a76c304 100644 --- a/include/linux/sunrpc/svcsock.h +++ b/include/linux/sunrpc/svcsock.h @@ -28,6 +28,7 @@ struct svc_sock { /* private TCP part */ u32 sk_reclen; /* length of record */ u32 sk_tcplen; /* current read length */ + struct rpc_xprt *sk_bc_xprt; /* NFSv4.1 backchannel xprt */ }; /* diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index c090df442572..228d694dbb90 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -179,6 +179,7 @@ struct rpc_xprt { spinlock_t reserve_lock; /* lock slot table */ u32 xid; /* Next XID value to use */ struct rpc_task * snd_task; /* Task blocked in send */ + struct svc_xprt *bc_xprt; /* NFSv4.1 backchannel */ #if defined(CONFIG_NFS_V4_1) struct svc_serv *bc_serv; /* The RPC service which will */ /* process the callback */ -- cgit v1.2.3 From 384912ed194e43c03ad1cdaa09b0b1e488c34d46 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Mon, 31 Aug 2009 21:08:19 +0000 Subject: net: Add DEVTYPE support for Ethernet based devices The Ethernet framing is used for a lot of devices these days. Most prominent are WiFi and WiMAX based devices. However for userspace application it is important to classify these devices correctly and not only see them as Ethernet devices. The daemons like HAL, DeviceKit or even NetworkManager with udev support tries to do the classification in userspace with a lot trickery and extra system calls. This is not good and actually reaches its limitations. Especially since the kernel does know the type of the Ethernet device it is pretty stupid. To solve this problem the underlying device type needs to be set and then the value will be exported as DEVTYPE via uevents and available within udev. # cat /sys/class/net/wlan0/uevent DEVTYPE=wlan INTERFACE=wlan0 IFINDEX=5 This is similar to subsystems like USB and SCSI that distinguish between hosts, devices, disks, partitions etc. The new SET_NETDEV_DEVTYPE() is a convenience helper to set the actual device type. All device types are free form, but for convenience the same strings as used with RFKILL are choosen. Signed-off-by: Marcel Holtmann Signed-off-by: David S. Miller --- include/linux/netdevice.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index a44118b1b56c..65ee1929b2b1 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -998,6 +998,12 @@ static inline void *netdev_priv(const struct net_device *dev) */ #define SET_NETDEV_DEV(net, pdev) ((net)->dev.parent = (pdev)) +/* Set the sysfs device type for the network logical device to allow + * fin grained indentification of different network device types. For + * example Ethernet, Wirelss LAN, Bluetooth, WiMAX etc. + */ +#define SET_NETDEV_DEVTYPE(net, devtype) ((net)->dev.type = (devtype)) + /** * netif_napi_add - initialize a napi context * @dev: network device -- cgit v1.2.3 From cc411d0bae9c19ec85a150aeab4b08335f5751d1 Mon Sep 17 00:00:00 2001 From: Brian Haley Date: Wed, 9 Sep 2009 14:41:32 +0000 Subject: ipv6: Add IFA_F_DADFAILED flag Add IFA_F_DADFAILED flag to denote an IPv6 address that has failed Duplicate Address Detection, that way tools like /sbin/ip can be more informative. 3: eth0: mtu 1500 qlen 1000 inet6 2001:db8::1/64 scope global tentative dadfailed valid_lft forever preferred_lft forever Signed-off-by: Brian Haley Signed-off-by: David S. Miller --- include/linux/if_addr.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/if_addr.h b/include/linux/if_addr.h index a60c821be44c..fd9740466757 100644 --- a/include/linux/if_addr.h +++ b/include/linux/if_addr.h @@ -41,6 +41,7 @@ enum #define IFA_F_NODAD 0x02 #define IFA_F_OPTIMISTIC 0x04 +#define IFA_F_DADFAILED 0x08 #define IFA_F_HOMEADDRESS 0x10 #define IFA_F_DEPRECATED 0x20 #define IFA_F_TENTATIVE 0x40 -- cgit v1.2.3 From f5bb1c558405aaac41b08b2ea71137db9db46e72 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?R=C3=A9mi=20Denis-Courmont?= Date: Wed, 9 Sep 2009 00:00:05 +0000 Subject: Phonet: back-end for autoconfigured addresses MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In some cases, the network device driver knows what layer-3 address the device should have. This adds support for the Phonet stack to automatically request from the driver and add that address to the network device. Signed-off-by: Rémi Denis-Courmont Signed-off-by: David S. Miller --- include/linux/phonet.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'include/linux') diff --git a/include/linux/phonet.h b/include/linux/phonet.h index ee5e3c9e2bca..82b45d16e50c 100644 --- a/include/linux/phonet.h +++ b/include/linux/phonet.h @@ -170,4 +170,21 @@ static inline __u8 pn_sockaddr_get_resource(const struct sockaddr_pn *spn) return spn->spn_resource; } +/* Phonet device ioctl requests */ +#ifdef __KERNEL__ +#define SIOCPNGAUTOCONF (SIOCDEVPRIVATE + 0) + +struct if_phonet_autoconf { + uint8_t device; +}; + +struct if_phonet_req { + char ifr_phonet_name[16]; + union { + struct if_phonet_autoconf ifru_phonet_autoconf; + } ifr_ifru; +}; +#define ifr_phonet_autoconf ifr_ifru.ifru_phonet_autoconf +#endif /* __KERNEL__ */ + #endif -- cgit v1.2.3 From 02571f89871e009b66fb5f8d5ae222e90e9f357c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?R=C3=A9mi=20Denis-Courmont?= Date: Wed, 9 Sep 2009 00:00:06 +0000 Subject: cdc-phonet: autoconfigure Phonet address MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rémi Denis-Courmont Signed-off-by: David S. Miller --- include/linux/phonet.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/phonet.h b/include/linux/phonet.h index 82b45d16e50c..1ef5a0781831 100644 --- a/include/linux/phonet.h +++ b/include/linux/phonet.h @@ -99,6 +99,9 @@ struct sockaddr_pn { __u8 spn_zero[sizeof(struct sockaddr) - sizeof(sa_family_t) - 3]; } __attribute__ ((packed)); +/* Well known address */ +#define PN_DEV_PC 0x10 + static inline __u16 pn_object(__u8 addr, __u16 port) { return (addr << 8) | (port & 0x3ff); -- cgit v1.2.3 From f17a1f06d2fa93f4825be572622eb02c4894db4e Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 4 Aug 2009 01:01:02 +0100 Subject: ARM: 5636/1: Move vendor enum to AMBA include This moves the primecell vendor enum definition inside vic.c out to linux/amba/bus.h where it belongs and replace any occurances of specific vendor ID:s with the respective enums instead. Signed-off-by: Linus Walleij Signed-off-by: Russell King --- include/linux/amba/bus.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index 9b93cafa82a0..ab94335b4bb9 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -36,6 +36,11 @@ struct amba_driver { struct amba_id *id_table; }; +enum amba_vendor { + AMBA_VENDOR_ARM = 0x41, + AMBA_VENDOR_ST = 0x80, +}; + #define amba_get_drvdata(d) dev_get_drvdata(&d->dev) #define amba_set_drvdata(d,p) dev_set_drvdata(&d->dev, p) -- cgit v1.2.3 From 18668ff9a3232d5f942a2f7abc1ad67d2760dcdf Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sun, 6 Sep 2009 18:49:48 +0200 Subject: firewire: core: header file cleanup fw_card_get, fw_card_put, fw_card_release are currently not exported for use outside the firewire-core. Move their definitions/ declarations from the subsystem header file to the core header file. Signed-off-by: Stefan Richter --- include/linux/firewire.h | 14 -------------- 1 file changed, 14 deletions(-) (limited to 'include/linux') diff --git a/include/linux/firewire.h b/include/linux/firewire.h index 192d1e43c43c..7e1d4dec83e7 100644 --- a/include/linux/firewire.h +++ b/include/linux/firewire.h @@ -134,20 +134,6 @@ struct fw_card { u32 topology_map[(CSR_TOPOLOGY_MAP_END - CSR_TOPOLOGY_MAP) / 4]; }; -static inline struct fw_card *fw_card_get(struct fw_card *card) -{ - kref_get(&card->kref); - - return card; -} - -void fw_card_release(struct kref *kref); - -static inline void fw_card_put(struct fw_card *card) -{ - kref_put(&card->kref, fw_card_release); -} - struct fw_attribute_group { struct attribute_group *groups[2]; struct attribute_group group; -- cgit v1.2.3 From 65dd2f93febf6345ce9e39d2f6e35ce1122f4a4a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 30 Jun 2009 16:14:17 -0300 Subject: V4L/DVB (12149): videodev2.h: Reorganize fourcc table With the changes this file suffered along the time, things got a little disorganized. In particular, V4L2_PIX_FMT_YVYU were shown as a device-specific format, instead of yet another variant of YUV. There's no functional change on this patch. It just adds some comments and reorder fourcc formats to their proper places. Signed-off-by: Mauro Carvalho Chehab --- include/linux/videodev2.h | 39 ++++++++++++++++++++++----------------- 1 file changed, 22 insertions(+), 17 deletions(-) (limited to 'include/linux') diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 74f16876f38d..eddd5ff99c80 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -275,7 +275,9 @@ struct v4l2_pix_format { __u32 priv; /* private data, depends on pixelformat */ }; -/* Pixel format FOURCC depth Description */ +/* Pixel format FOURCC depth Description */ + +/* RGB formats */ #define V4L2_PIX_FMT_RGB332 v4l2_fourcc('R', 'G', 'B', '1') /* 8 RGB-3-3-2 */ #define V4L2_PIX_FMT_RGB444 v4l2_fourcc('R', '4', '4', '4') /* 16 xxxxrrrr ggggbbbb */ #define V4L2_PIX_FMT_RGB555 v4l2_fourcc('R', 'G', 'B', 'O') /* 16 RGB-5-5-5 */ @@ -286,12 +288,20 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_RGB24 v4l2_fourcc('R', 'G', 'B', '3') /* 24 RGB-8-8-8 */ #define V4L2_PIX_FMT_BGR32 v4l2_fourcc('B', 'G', 'R', '4') /* 32 BGR-8-8-8-8 */ #define V4L2_PIX_FMT_RGB32 v4l2_fourcc('R', 'G', 'B', '4') /* 32 RGB-8-8-8-8 */ + +/* Grey formats */ #define V4L2_PIX_FMT_GREY v4l2_fourcc('G', 'R', 'E', 'Y') /* 8 Greyscale */ #define V4L2_PIX_FMT_Y16 v4l2_fourcc('Y', '1', '6', ' ') /* 16 Greyscale */ + +/* Palette formats */ #define V4L2_PIX_FMT_PAL8 v4l2_fourcc('P', 'A', 'L', '8') /* 8 8-bit palette */ + +/* Luminance+Chrominance formats */ #define V4L2_PIX_FMT_YVU410 v4l2_fourcc('Y', 'V', 'U', '9') /* 9 YVU 4:1:0 */ #define V4L2_PIX_FMT_YVU420 v4l2_fourcc('Y', 'V', '1', '2') /* 12 YVU 4:2:0 */ #define V4L2_PIX_FMT_YUYV v4l2_fourcc('Y', 'U', 'Y', 'V') /* 16 YUV 4:2:2 */ +#define V4L2_PIX_FMT_YYUV v4l2_fourcc('Y', 'Y', 'U', 'V') /* 16 YUV 4:2:2 */ +#define V4L2_PIX_FMT_YVYU v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16 YVU 4:2:2 */ #define V4L2_PIX_FMT_UYVY v4l2_fourcc('U', 'Y', 'V', 'Y') /* 16 YUV 4:2:2 */ #define V4L2_PIX_FMT_VYUY v4l2_fourcc('V', 'Y', 'U', 'Y') /* 16 YUV 4:2:2 */ #define V4L2_PIX_FMT_YUV422P v4l2_fourcc('4', '2', '2', 'P') /* 16 YVU422 planar */ @@ -301,6 +311,10 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_YUV555 v4l2_fourcc('Y', 'U', 'V', 'O') /* 16 YUV-5-5-5 */ #define V4L2_PIX_FMT_YUV565 v4l2_fourcc('Y', 'U', 'V', 'P') /* 16 YUV-5-6-5 */ #define V4L2_PIX_FMT_YUV32 v4l2_fourcc('Y', 'U', 'V', '4') /* 32 YUV-8-8-8-8 */ +#define V4L2_PIX_FMT_YUV410 v4l2_fourcc('Y', 'U', 'V', '9') /* 9 YUV 4:1:0 */ +#define V4L2_PIX_FMT_YUV420 v4l2_fourcc('Y', 'U', '1', '2') /* 12 YUV 4:2:0 */ +#define V4L2_PIX_FMT_HI240 v4l2_fourcc('H', 'I', '2', '4') /* 8 8-bit color */ +#define V4L2_PIX_FMT_HM12 v4l2_fourcc('H', 'M', '1', '2') /* 8 YUV 4:2:0 16x16 macroblocks */ /* two planes -- one Y, one Cr + Cb interleaved */ #define V4L2_PIX_FMT_NV12 v4l2_fourcc('N', 'V', '1', '2') /* 12 Y/CbCr 4:2:0 */ @@ -308,25 +322,17 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_NV16 v4l2_fourcc('N', 'V', '1', '6') /* 16 Y/CbCr 4:2:2 */ #define V4L2_PIX_FMT_NV61 v4l2_fourcc('N', 'V', '6', '1') /* 16 Y/CrCb 4:2:2 */ -/* The following formats are not defined in the V4L2 specification */ -#define V4L2_PIX_FMT_YUV410 v4l2_fourcc('Y', 'U', 'V', '9') /* 9 YUV 4:1:0 */ -#define V4L2_PIX_FMT_YUV420 v4l2_fourcc('Y', 'U', '1', '2') /* 12 YUV 4:2:0 */ -#define V4L2_PIX_FMT_YYUV v4l2_fourcc('Y', 'Y', 'U', 'V') /* 16 YUV 4:2:2 */ -#define V4L2_PIX_FMT_HI240 v4l2_fourcc('H', 'I', '2', '4') /* 8 8-bit color */ -#define V4L2_PIX_FMT_HM12 v4l2_fourcc('H', 'M', '1', '2') /* 8 YUV 4:2:0 16x16 macroblocks */ - -/* see http://www.siliconimaging.com/RGB%20Bayer.htm */ +/* Bayer formats - see http://www.siliconimaging.com/RGB%20Bayer.htm */ #define V4L2_PIX_FMT_SBGGR8 v4l2_fourcc('B', 'A', '8', '1') /* 8 BGBG.. GRGR.. */ #define V4L2_PIX_FMT_SGBRG8 v4l2_fourcc('G', 'B', 'R', 'G') /* 8 GBGB.. RGRG.. */ #define V4L2_PIX_FMT_SGRBG8 v4l2_fourcc('G', 'R', 'B', 'G') /* 8 GRGR.. BGBG.. */ - -/* - * 10bit raw bayer, expanded to 16 bits - * xxxxrrrrrrrrrrxxxxgggggggggg xxxxggggggggggxxxxbbbbbbbbbb... - */ -#define V4L2_PIX_FMT_SGRBG10 v4l2_fourcc('B', 'A', '1', '0') -/* 10bit raw bayer DPCM compressed to 8 bits */ +#define V4L2_PIX_FMT_SGRBG10 v4l2_fourcc('B', 'A', '1', '0') /* 10bit raw bayer */ + /* 10bit raw bayer DPCM compressed to 8 bits */ #define V4L2_PIX_FMT_SGRBG10DPCM8 v4l2_fourcc('B', 'D', '1', '0') + /* + * 10bit raw bayer, expanded to 16 bits + * xxxxrrrrrrrrrrxxxxgggggggggg xxxxggggggggggxxxxbbbbbbbbbb... + */ #define V4L2_PIX_FMT_SBGGR16 v4l2_fourcc('B', 'Y', 'R', '2') /* 16 BGBG.. GRGR.. */ /* compressed formats */ @@ -350,7 +356,6 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_MR97310A v4l2_fourcc('M', '3', '1', '0') /* compressed BGGR bayer */ #define V4L2_PIX_FMT_SQ905C v4l2_fourcc('9', '0', '5', 'C') /* compressed RGGB bayer */ #define V4L2_PIX_FMT_PJPG v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */ -#define V4L2_PIX_FMT_YVYU v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16 YVU 4:2:2 */ #define V4L2_PIX_FMT_OV511 v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */ #define V4L2_PIX_FMT_OV518 v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */ -- cgit v1.2.3 From de05f63430e8cb8cde0a21260bc6b01765111e5c Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 26 Jun 2009 12:15:38 -0300 Subject: V4L/DVB (12187): uvcvideo: Move UVC definitions to linux/usb/video.h To make UVC constants accessible by a future UVC gadget driver, move them from drivers/media/video/uvc/uvcvideo.h to include/linux/usb/video.h. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- include/linux/usb/video.h | 164 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 164 insertions(+) create mode 100644 include/linux/usb/video.h (limited to 'include/linux') diff --git a/include/linux/usb/video.h b/include/linux/usb/video.h new file mode 100644 index 000000000000..be436d9ee479 --- /dev/null +++ b/include/linux/usb/video.h @@ -0,0 +1,164 @@ +/* + * USB Video Class definitions. + * + * Copyright (C) 2009 Laurent Pinchart + * + * This file holds USB constants and structures defined by the USB Device + * Class Definition for Video Devices. Unless otherwise stated, comments + * below reference relevant sections of the USB Video Class 1.1 specification + * available at + * + * http://www.usb.org/developers/devclass_docs/USB_Video_Class_1_1.zip + */ + +#ifndef __LINUX_USB_VIDEO_H +#define __LINUX_USB_VIDEO_H + +#include + +/* -------------------------------------------------------------------------- + * UVC constants + */ + +/* A.2. Video Interface Subclass Codes */ +#define UVC_SC_UNDEFINED 0x00 +#define UVC_SC_VIDEOCONTROL 0x01 +#define UVC_SC_VIDEOSTREAMING 0x02 +#define UVC_SC_VIDEO_INTERFACE_COLLECTION 0x03 + +/* A.3. Video Interface Protocol Codes */ +#define UVC_PC_PROTOCOL_UNDEFINED 0x00 + +/* A.5. Video Class-Specific VC Interface Descriptor Subtypes */ +#define UVC_VC_DESCRIPTOR_UNDEFINED 0x00 +#define UVC_VC_HEADER 0x01 +#define UVC_VC_INPUT_TERMINAL 0x02 +#define UVC_VC_OUTPUT_TERMINAL 0x03 +#define UVC_VC_SELECTOR_UNIT 0x04 +#define UVC_VC_PROCESSING_UNIT 0x05 +#define UVC_VC_EXTENSION_UNIT 0x06 + +/* A.6. Video Class-Specific VS Interface Descriptor Subtypes */ +#define UVC_VS_UNDEFINED 0x00 +#define UVC_VS_INPUT_HEADER 0x01 +#define UVC_VS_OUTPUT_HEADER 0x02 +#define UVC_VS_STILL_IMAGE_FRAME 0x03 +#define UVC_VS_FORMAT_UNCOMPRESSED 0x04 +#define UVC_VS_FRAME_UNCOMPRESSED 0x05 +#define UVC_VS_FORMAT_MJPEG 0x06 +#define UVC_VS_FRAME_MJPEG 0x07 +#define UVC_VS_FORMAT_MPEG2TS 0x0a +#define UVC_VS_FORMAT_DV 0x0c +#define UVC_VS_COLORFORMAT 0x0d +#define UVC_VS_FORMAT_FRAME_BASED 0x10 +#define UVC_VS_FRAME_FRAME_BASED 0x11 +#define UVC_VS_FORMAT_STREAM_BASED 0x12 + +/* A.7. Video Class-Specific Endpoint Descriptor Subtypes */ +#define UVC_EP_UNDEFINED 0x00 +#define UVC_EP_GENERAL 0x01 +#define UVC_EP_ENDPOINT 0x02 +#define UVC_EP_INTERRUPT 0x03 + +/* A.8. Video Class-Specific Request Codes */ +#define UVC_RC_UNDEFINED 0x00 +#define UVC_SET_CUR 0x01 +#define UVC_GET_CUR 0x81 +#define UVC_GET_MIN 0x82 +#define UVC_GET_MAX 0x83 +#define UVC_GET_RES 0x84 +#define UVC_GET_LEN 0x85 +#define UVC_GET_INFO 0x86 +#define UVC_GET_DEF 0x87 + +/* A.9.1. VideoControl Interface Control Selectors */ +#define UVC_VC_CONTROL_UNDEFINED 0x00 +#define UVC_VC_VIDEO_POWER_MODE_CONTROL 0x01 +#define UVC_VC_REQUEST_ERROR_CODE_CONTROL 0x02 + +/* A.9.2. Terminal Control Selectors */ +#define UVC_TE_CONTROL_UNDEFINED 0x00 + +/* A.9.3. Selector Unit Control Selectors */ +#define UVC_SU_CONTROL_UNDEFINED 0x00 +#define UVC_SU_INPUT_SELECT_CONTROL 0x01 + +/* A.9.4. Camera Terminal Control Selectors */ +#define UVC_CT_CONTROL_UNDEFINED 0x00 +#define UVC_CT_SCANNING_MODE_CONTROL 0x01 +#define UVC_CT_AE_MODE_CONTROL 0x02 +#define UVC_CT_AE_PRIORITY_CONTROL 0x03 +#define UVC_CT_EXPOSURE_TIME_ABSOLUTE_CONTROL 0x04 +#define UVC_CT_EXPOSURE_TIME_RELATIVE_CONTROL 0x05 +#define UVC_CT_FOCUS_ABSOLUTE_CONTROL 0x06 +#define UVC_CT_FOCUS_RELATIVE_CONTROL 0x07 +#define UVC_CT_FOCUS_AUTO_CONTROL 0x08 +#define UVC_CT_IRIS_ABSOLUTE_CONTROL 0x09 +#define UVC_CT_IRIS_RELATIVE_CONTROL 0x0a +#define UVC_CT_ZOOM_ABSOLUTE_CONTROL 0x0b +#define UVC_CT_ZOOM_RELATIVE_CONTROL 0x0c +#define UVC_CT_PANTILT_ABSOLUTE_CONTROL 0x0d +#define UVC_CT_PANTILT_RELATIVE_CONTROL 0x0e +#define UVC_CT_ROLL_ABSOLUTE_CONTROL 0x0f +#define UVC_CT_ROLL_RELATIVE_CONTROL 0x10 +#define UVC_CT_PRIVACY_CONTROL 0x11 + +/* A.9.5. Processing Unit Control Selectors */ +#define UVC_PU_CONTROL_UNDEFINED 0x00 +#define UVC_PU_BACKLIGHT_COMPENSATION_CONTROL 0x01 +#define UVC_PU_BRIGHTNESS_CONTROL 0x02 +#define UVC_PU_CONTRAST_CONTROL 0x03 +#define UVC_PU_GAIN_CONTROL 0x04 +#define UVC_PU_POWER_LINE_FREQUENCY_CONTROL 0x05 +#define UVC_PU_HUE_CONTROL 0x06 +#define UVC_PU_SATURATION_CONTROL 0x07 +#define UVC_PU_SHARPNESS_CONTROL 0x08 +#define UVC_PU_GAMMA_CONTROL 0x09 +#define UVC_PU_WHITE_BALANCE_TEMPERATURE_CONTROL 0x0a +#define UVC_PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL 0x0b +#define UVC_PU_WHITE_BALANCE_COMPONENT_CONTROL 0x0c +#define UVC_PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL 0x0d +#define UVC_PU_DIGITAL_MULTIPLIER_CONTROL 0x0e +#define UVC_PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL 0x0f +#define UVC_PU_HUE_AUTO_CONTROL 0x10 +#define UVC_PU_ANALOG_VIDEO_STANDARD_CONTROL 0x11 +#define UVC_PU_ANALOG_LOCK_STATUS_CONTROL 0x12 + +/* A.9.7. VideoStreaming Interface Control Selectors */ +#define UVC_VS_CONTROL_UNDEFINED 0x00 +#define UVC_VS_PROBE_CONTROL 0x01 +#define UVC_VS_COMMIT_CONTROL 0x02 +#define UVC_VS_STILL_PROBE_CONTROL 0x03 +#define UVC_VS_STILL_COMMIT_CONTROL 0x04 +#define UVC_VS_STILL_IMAGE_TRIGGER_CONTROL 0x05 +#define UVC_VS_STREAM_ERROR_CODE_CONTROL 0x06 +#define UVC_VS_GENERATE_KEY_FRAME_CONTROL 0x07 +#define UVC_VS_UPDATE_FRAME_SEGMENT_CONTROL 0x08 +#define UVC_VS_SYNC_DELAY_CONTROL 0x09 + +/* B.1. USB Terminal Types */ +#define UVC_TT_VENDOR_SPECIFIC 0x0100 +#define UVC_TT_STREAMING 0x0101 + +/* B.2. Input Terminal Types */ +#define UVC_ITT_VENDOR_SPECIFIC 0x0200 +#define UVC_ITT_CAMERA 0x0201 +#define UVC_ITT_MEDIA_TRANSPORT_INPUT 0x0202 + +/* B.3. Output Terminal Types */ +#define UVC_OTT_VENDOR_SPECIFIC 0x0300 +#define UVC_OTT_DISPLAY 0x0301 +#define UVC_OTT_MEDIA_TRANSPORT_OUTPUT 0x0302 + +/* B.4. External Terminal Types */ +#define UVC_EXTERNAL_VENDOR_SPECIFIC 0x0400 +#define UVC_COMPOSITE_CONNECTOR 0x0401 +#define UVC_SVIDEO_CONNECTOR 0x0402 +#define UVC_COMPONENT_CONNECTOR 0x0403 + +/* 2.4.2.2. Status Packet Type */ +#define UVC_STATUS_TYPE_CONTROL 1 +#define UVC_STATUS_TYPE_STREAMING 2 + +#endif /* __LINUX_USB_VIDEO_H */ + -- cgit v1.2.3 From ef5b5b7e73038f2c7d0d1b020c6eac6435c2b552 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 20 Jun 2009 05:37:27 -0300 Subject: V4L/DVB (12212): v4l2: add RDS API to videodev2.h Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/linux/videodev2.h | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'include/linux') diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index eddd5ff99c80..22fc99d58d34 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -1186,6 +1186,7 @@ struct v4l2_modulator { #define V4L2_TUNER_CAP_LANG2 0x0020 #define V4L2_TUNER_CAP_SAP 0x0020 #define V4L2_TUNER_CAP_LANG1 0x0040 +#define V4L2_TUNER_CAP_RDS 0x0080 /* Flags for the 'rxsubchans' field */ #define V4L2_TUNER_SUB_MONO 0x0001 @@ -1193,6 +1194,7 @@ struct v4l2_modulator { #define V4L2_TUNER_SUB_LANG2 0x0004 #define V4L2_TUNER_SUB_SAP 0x0004 #define V4L2_TUNER_SUB_LANG1 0x0008 +#define V4L2_TUNER_SUB_RDS 0x0010 /* Values for the 'audmode' field */ #define V4L2_TUNER_MODE_MONO 0x0000 @@ -1217,6 +1219,27 @@ struct v4l2_hw_freq_seek { __u32 reserved[8]; }; +/* + * R D S + */ + +struct v4l2_rds_data { + __u8 lsb; + __u8 msb; + __u8 block; +} __attribute__ ((packed)); + +#define V4L2_RDS_BLOCK_MSK 0x7 +#define V4L2_RDS_BLOCK_A 0 +#define V4L2_RDS_BLOCK_B 1 +#define V4L2_RDS_BLOCK_C 2 +#define V4L2_RDS_BLOCK_D 3 +#define V4L2_RDS_BLOCK_C_ALT 4 +#define V4L2_RDS_BLOCK_INVALID 7 + +#define V4L2_RDS_BLOCK_CORRECTED 0x40 +#define V4L2_RDS_BLOCK_ERROR 0x80 + /* * A U D I O */ -- cgit v1.2.3 From 1cb662a3144992259edfd3cf9f54a6b25a913a0f Mon Sep 17 00:00:00 2001 From: Andreas Oberritter Date: Tue, 14 Jul 2009 20:28:50 -0300 Subject: V4L/DVB (12275): Add two new ioctls: DMX_ADD_PID and DMX_REMOVE_PID DMX_ADD_PID allows to add multiple PIDs to a transport stream filter previously set up with DMX_SET_PES_FILTER and output=DMX_OUT_TSDEMUX_TAP. DMX_REMOVE_PID is used to drop a PID from a filter. These ioctls are to be used by readers of /dev/dvb/adapterX/demuxY. They may be called at any time, i.e. before or after the first filter on the shared file descriptor was started. They make it possible to record multiple services without the need to de- or re-multiplex TS packets. To accomplish this, dmxdev_filter->feed.ts has been converted to a list of struct dmxdev_feeds, each containing a PID value and a pointer to a struct dmx_ts_feed. Signed-off-by: Andreas Oberritter Signed-off-by: Mauro Carvalho Chehab --- include/linux/dvb/dmx.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/dvb/dmx.h b/include/linux/dvb/dmx.h index fef943738a24..f078f3ac82d4 100644 --- a/include/linux/dvb/dmx.h +++ b/include/linux/dvb/dmx.h @@ -151,5 +151,7 @@ struct dmx_stc { #define DMX_GET_CAPS _IOR('o', 48, dmx_caps_t) #define DMX_SET_SOURCE _IOW('o', 49, dmx_source_t) #define DMX_GET_STC _IOWR('o', 50, struct dmx_stc) +#define DMX_ADD_PID _IOW('o', 51, __u16) +#define DMX_REMOVE_PID _IOW('o', 52, __u16) #endif /*_DVBDMX_H_*/ -- cgit v1.2.3 From 6ace40effd34331a604c5eeae90838cf8dd7eb8f Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 20 Jun 2009 09:50:39 -0300 Subject: V4L/DVB (12316): v4l: add V4L2_CAP_RDS_OUTPUT and V4L2_CAP_MODULATOR caps Add capabilities to describe an FM transmitter device. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/linux/videodev2.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 22fc99d58d34..293ba181f95a 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -252,10 +252,12 @@ struct v4l2_capability { #define V4L2_CAP_RDS_CAPTURE 0x00000100 /* RDS data capture */ #define V4L2_CAP_VIDEO_OUTPUT_OVERLAY 0x00000200 /* Can do video output overlay */ #define V4L2_CAP_HW_FREQ_SEEK 0x00000400 /* Can do hardware frequency seek */ +#define V4L2_CAP_RDS_OUTPUT 0x00000800 /* Is an RDS encoder */ #define V4L2_CAP_TUNER 0x00010000 /* has a tuner */ #define V4L2_CAP_AUDIO 0x00020000 /* has audio support */ #define V4L2_CAP_RADIO 0x00040000 /* is a radio device */ +#define V4L2_CAP_MODULATOR 0x00080000 /* has a modulator */ #define V4L2_CAP_READWRITE 0x01000000 /* read/write systemcalls */ #define V4L2_CAP_ASYNCIO 0x02000000 /* async I/O */ -- cgit v1.2.3 From 6b5a9492ca0c991bab1ac495624e17520e9edf18 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 11 Aug 2009 18:47:18 -0300 Subject: V4L/DVB (12543): v4l: introduce string control support. The upcoming RDS encoder needs support for string controls. This patch implements the core implementation. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/linux/videodev2.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 293ba181f95a..9ab4cbe676fd 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -167,6 +167,7 @@ enum v4l2_ctrl_type { V4L2_CTRL_TYPE_BUTTON = 4, V4L2_CTRL_TYPE_INTEGER64 = 5, V4L2_CTRL_TYPE_CTRL_CLASS = 6, + V4L2_CTRL_TYPE_STRING = 7, }; enum v4l2_tuner_type { @@ -795,11 +796,12 @@ struct v4l2_control { struct v4l2_ext_control { __u32 id; - __u32 reserved2[2]; + __u32 size; + __u32 reserved2[1]; union { __s32 value; __s64 value64; - void *reserved; + char *string; }; } __attribute__ ((packed)); -- cgit v1.2.3 From 6b4249413abb634d9b2ff44c685da744f02e49d1 Mon Sep 17 00:00:00 2001 From: Eduardo Valentin Date: Sat, 8 Aug 2009 08:38:58 -0300 Subject: V4L/DVB (12548): v4l2: video device: Add V4L2_CTRL_CLASS_FM_TX controls This patch adds a new class of extended controls. This class is intended to support FM Radio Modulators properties such as: rds, audio limiters, audio compression, pilot tone generation, tuning power levels and preemphasis properties. Signed-off-by: Eduardo Valentin Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/linux/videodev2.h | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'include/linux') diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 9ab4cbe676fd..5758066cb57b 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -817,6 +817,7 @@ struct v4l2_ext_controls { #define V4L2_CTRL_CLASS_USER 0x00980000 /* Old-style 'user' controls */ #define V4L2_CTRL_CLASS_MPEG 0x00990000 /* MPEG-compression controls */ #define V4L2_CTRL_CLASS_CAMERA 0x009a0000 /* Camera class controls */ +#define V4L2_CTRL_CLASS_FM_TX 0x009b0000 /* FM Modulator control class */ #define V4L2_CTRL_ID_MASK (0x0fffffff) #define V4L2_CTRL_ID2CLASS(id) ((id) & 0x0fff0000UL) @@ -1156,6 +1157,39 @@ enum v4l2_exposure_auto_type { #define V4L2_CID_PRIVACY (V4L2_CID_CAMERA_CLASS_BASE+16) +/* FM Modulator class control IDs */ +#define V4L2_CID_FM_TX_CLASS_BASE (V4L2_CTRL_CLASS_FM_TX | 0x900) +#define V4L2_CID_FM_TX_CLASS (V4L2_CTRL_CLASS_FM_TX | 1) + +#define V4L2_CID_RDS_TX_DEVIATION (V4L2_CID_FM_TX_CLASS_BASE + 1) +#define V4L2_CID_RDS_TX_PI (V4L2_CID_FM_TX_CLASS_BASE + 2) +#define V4L2_CID_RDS_TX_PTY (V4L2_CID_FM_TX_CLASS_BASE + 3) +#define V4L2_CID_RDS_TX_PS_NAME (V4L2_CID_FM_TX_CLASS_BASE + 5) +#define V4L2_CID_RDS_TX_RADIO_TEXT (V4L2_CID_FM_TX_CLASS_BASE + 6) + +#define V4L2_CID_AUDIO_LIMITER_ENABLED (V4L2_CID_FM_TX_CLASS_BASE + 64) +#define V4L2_CID_AUDIO_LIMITER_RELEASE_TIME (V4L2_CID_FM_TX_CLASS_BASE + 65) +#define V4L2_CID_AUDIO_LIMITER_DEVIATION (V4L2_CID_FM_TX_CLASS_BASE + 66) + +#define V4L2_CID_AUDIO_COMPRESSION_ENABLED (V4L2_CID_FM_TX_CLASS_BASE + 80) +#define V4L2_CID_AUDIO_COMPRESSION_GAIN (V4L2_CID_FM_TX_CLASS_BASE + 81) +#define V4L2_CID_AUDIO_COMPRESSION_THRESHOLD (V4L2_CID_FM_TX_CLASS_BASE + 82) +#define V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME (V4L2_CID_FM_TX_CLASS_BASE + 83) +#define V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME (V4L2_CID_FM_TX_CLASS_BASE + 84) + +#define V4L2_CID_PILOT_TONE_ENABLED (V4L2_CID_FM_TX_CLASS_BASE + 96) +#define V4L2_CID_PILOT_TONE_DEVIATION (V4L2_CID_FM_TX_CLASS_BASE + 97) +#define V4L2_CID_PILOT_TONE_FREQUENCY (V4L2_CID_FM_TX_CLASS_BASE + 98) + +#define V4L2_CID_TUNE_PREEMPHASIS (V4L2_CID_FM_TX_CLASS_BASE + 112) +enum v4l2_preemphasis { + V4L2_PREEMPHASIS_DISABLED = 0, + V4L2_PREEMPHASIS_50_uS = 1, + V4L2_PREEMPHASIS_75_uS = 2, +}; +#define V4L2_CID_TUNE_POWER_LEVEL (V4L2_CID_FM_TX_CLASS_BASE + 113) +#define V4L2_CID_TUNE_ANTENNA_CAPACITOR (V4L2_CID_FM_TX_CLASS_BASE + 114) + /* * T U N I N G */ -- cgit v1.2.3 From 1e3c1f7695a446742e24ea1f0c80715be98edbc4 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 31 Aug 2009 11:32:46 -0300 Subject: V4L/DVB (12625): Add new V4L2_FMT_FLAG_EMULATED flag to videodev2.h V4L2_FMT_FLAG_EMULATED 0x0002 This format is not native to the device but emulated through software (usually libv4l2), where possible try to use a native format instead for better performance. Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- include/linux/videodev2.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 5758066cb57b..3689d7d81fe9 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -375,6 +375,7 @@ struct v4l2_fmtdesc { }; #define V4L2_FMT_FLAG_COMPRESSED 0x0001 +#define V4L2_FMT_FLAG_EMULATED 0x0002 #if 1 /* Experimental Frame Size and frame rate enumeration */ -- cgit v1.2.3 From 16bb8eb1b73bf940d30ff88cae622bfcd3790f61 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Sat, 12 Sep 2009 19:04:54 -0400 Subject: tracing: allow filter predicates to handle ksym symbols This patch increases the max string used by predicates to handle KSYM_SYMBOL_LEN. Also moves an include to look nicer. Signed-off-by: Steven Rostedt --- include/linux/ftrace_event.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h index 0608b0ff2635..bd099ba82ccc 100644 --- a/include/linux/ftrace_event.h +++ b/include/linux/ftrace_event.h @@ -1,8 +1,8 @@ #ifndef _LINUX_FTRACE_EVENT_H #define _LINUX_FTRACE_EVENT_H -#include #include +#include #include struct trace_array; @@ -135,7 +135,7 @@ struct ftrace_event_call { }; #define MAX_FILTER_PRED 32 -#define MAX_FILTER_STR_VAL 128 +#define MAX_FILTER_STR_VAL 256 /* Should handle KSYM_SYMBOL_LEN */ extern void destroy_preds(struct ftrace_event_call *call); extern int filter_match_preds(struct ftrace_event_call *call, void *rec); -- cgit v1.2.3 From f300baba5a1536070d6d77bf0c8c4ca999bb4f0f Mon Sep 17 00:00:00 2001 From: Alexandros Batsakis Date: Thu, 10 Sep 2009 17:33:30 +0300 Subject: nfsd41: sunrpc: add new xprt class for nfsv4.1 backchannel [sunrpc: change idle timeout value for the backchannel] Signed-off-by: Alexandros Batsakis Signed-off-by: Benny Halevy Acked-by: Trond Myklebust Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/clnt.h | 1 + include/linux/sunrpc/xprt.h | 18 ++++++++++++++++++ include/linux/sunrpc/xprtrdma.h | 5 ----- include/linux/sunrpc/xprtsock.h | 11 ----------- 4 files changed, 19 insertions(+), 16 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h index 3d025588e56e..8ed9642a5a76 100644 --- a/include/linux/sunrpc/clnt.h +++ b/include/linux/sunrpc/clnt.h @@ -114,6 +114,7 @@ struct rpc_create_args { rpc_authflavor_t authflavor; unsigned long flags; char *client_name; + struct svc_xprt *bc_xprt; /* NFSv4.1 backchannel */ }; /* Values for "flags" field */ diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index 228d694dbb90..6f9457a75b8f 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -124,6 +124,23 @@ struct rpc_xprt_ops { void (*print_stats)(struct rpc_xprt *xprt, struct seq_file *seq); }; +/* + * RPC transport identifiers + * + * To preserve compatibility with the historical use of raw IP protocol + * id's for transport selection, UDP and TCP identifiers are specified + * with the previous values. No such restriction exists for new transports, + * except that they may not collide with these values (17 and 6, + * respectively). + */ +#define XPRT_TRANSPORT_BC (1 << 31) +enum xprt_transports { + XPRT_TRANSPORT_UDP = IPPROTO_UDP, + XPRT_TRANSPORT_TCP = IPPROTO_TCP, + XPRT_TRANSPORT_BC_TCP = IPPROTO_TCP | XPRT_TRANSPORT_BC, + XPRT_TRANSPORT_RDMA = 256 +}; + struct rpc_xprt { struct kref kref; /* Reference count */ struct rpc_xprt_ops * ops; /* transport methods */ @@ -232,6 +249,7 @@ struct xprt_create { struct sockaddr * srcaddr; /* optional local address */ struct sockaddr * dstaddr; /* remote peer address */ size_t addrlen; + struct svc_xprt *bc_xprt; /* NFSv4.1 backchannel */ }; struct xprt_class { diff --git a/include/linux/sunrpc/xprtrdma.h b/include/linux/sunrpc/xprtrdma.h index 54a379c9e8eb..c2f04e1ae159 100644 --- a/include/linux/sunrpc/xprtrdma.h +++ b/include/linux/sunrpc/xprtrdma.h @@ -40,11 +40,6 @@ #ifndef _LINUX_SUNRPC_XPRTRDMA_H #define _LINUX_SUNRPC_XPRTRDMA_H -/* - * RPC transport identifier for RDMA - */ -#define XPRT_TRANSPORT_RDMA 256 - /* * rpcbind (v3+) RDMA netid. */ diff --git a/include/linux/sunrpc/xprtsock.h b/include/linux/sunrpc/xprtsock.h index c2a46c45c8f7..3f14a02e9cc0 100644 --- a/include/linux/sunrpc/xprtsock.h +++ b/include/linux/sunrpc/xprtsock.h @@ -12,17 +12,6 @@ int init_socket_xprt(void); void cleanup_socket_xprt(void); -/* - * RPC transport identifiers for UDP, TCP - * - * To preserve compatibility with the historical use of raw IP protocol - * id's for transport selection, these are specified with the previous - * values. No such restriction exists for new transports, except that - * they may not collide with these values (17 and 6, respectively). - */ -#define XPRT_TRANSPORT_UDP IPPROTO_UDP -#define XPRT_TRANSPORT_TCP IPPROTO_TCP - /* * RPC slot table sizes for UDP, TCP transports */ -- cgit v1.2.3 From ed868a56988464cd31de0302426a5e94d3127f10 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Sat, 12 Sep 2009 22:54:10 -0400 Subject: Creds: creds->security can be NULL is selinux is disabled __validate_process_creds should check if selinux is actually enabled before running tests on the selinux portion of the credentials struct. Signed-off-by: Eric Paris Signed-off-by: James Morris --- include/linux/cred.h | 13 ++++++++----- include/linux/selinux.h | 9 +++++++++ 2 files changed, 17 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/cred.h b/include/linux/cred.h index 24520a539c6f..fb371601a3b4 100644 --- a/include/linux/cred.h +++ b/include/linux/cred.h @@ -15,6 +15,7 @@ #include #include #include +#include #include struct user_struct; @@ -182,11 +183,13 @@ static inline bool creds_are_invalid(const struct cred *cred) if (atomic_read(&cred->usage) < atomic_read(&cred->subscribers)) return true; #ifdef CONFIG_SECURITY_SELINUX - if ((unsigned long) cred->security < PAGE_SIZE) - return true; - if ((*(u32*)cred->security & 0xffffff00) == - (POISON_FREE << 24 | POISON_FREE << 16 | POISON_FREE << 8)) - return true; + if (selinux_is_enabled()) { + if ((unsigned long) cred->security < PAGE_SIZE) + return true; + if ((*(u32 *)cred->security & 0xffffff00) == + (POISON_FREE << 24 | POISON_FREE << 16 | POISON_FREE << 8)) + return true; + } #endif return false; } diff --git a/include/linux/selinux.h b/include/linux/selinux.h index 20f965d4b041..223d06a6feb1 100644 --- a/include/linux/selinux.h +++ b/include/linux/selinux.h @@ -61,6 +61,11 @@ void selinux_secmark_refcount_inc(void); * existing SECMARK targets has been removed/flushed. */ void selinux_secmark_refcount_dec(void); + +/** + * selinux_is_enabled - is SELinux enabled? + */ +bool selinux_is_enabled(void); #else static inline int selinux_string_to_sid(const char *str, u32 *sid) @@ -84,6 +89,10 @@ static inline void selinux_secmark_refcount_dec(void) return; } +static bool selinux_is_enabled(void) +{ + return false; +} #endif /* CONFIG_SECURITY_SELINUX */ #endif /* _LINUX_SELINUX_H */ -- cgit v1.2.3 From a9327cac440be4d8333bba975cbbf76045096275 Mon Sep 17 00:00:00 2001 From: Nikanth Karthikesan Date: Fri, 11 Sep 2009 09:18:54 +0200 Subject: Seperate read and write statistics of in_flight requests Currently, there is a single in_flight counter measuring the number of requests in the request_queue. But some monitoring tools would like to know how many read requests and write requests are in progress. Split the current in_flight counter into two seperate counters for read and write. This information is exported as a sysfs attribute, as changing the currently available stat files would break the existing tools. Signed-off-by: Nikanth Karthikesan Signed-off-by: Jens Axboe --- include/linux/genhd.h | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/genhd.h b/include/linux/genhd.h index 45fc320a53c6..44263cb27121 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -98,7 +98,7 @@ struct hd_struct { int make_it_fail; #endif unsigned long stamp; - int in_flight; + int in_flight[2]; #ifdef CONFIG_SMP struct disk_stats *dkstats; #else @@ -322,18 +322,23 @@ static inline void free_part_stats(struct hd_struct *part) #define part_stat_sub(cpu, gendiskp, field, subnd) \ part_stat_add(cpu, gendiskp, field, -subnd) -static inline void part_inc_in_flight(struct hd_struct *part) +static inline void part_inc_in_flight(struct hd_struct *part, int rw) { - part->in_flight++; + part->in_flight[rw]++; if (part->partno) - part_to_disk(part)->part0.in_flight++; + part_to_disk(part)->part0.in_flight[rw]++; } -static inline void part_dec_in_flight(struct hd_struct *part) +static inline void part_dec_in_flight(struct hd_struct *part, int rw) { - part->in_flight--; + part->in_flight[rw]--; if (part->partno) - part_to_disk(part)->part0.in_flight--; + part_to_disk(part)->part0.in_flight[rw]--; +} + +static inline int part_in_flight(struct hd_struct *part) +{ + return part->in_flight[0] + part->in_flight[1]; } /* block/blk-core.c */ @@ -546,6 +551,8 @@ extern ssize_t part_size_show(struct device *dev, struct device_attribute *attr, char *buf); extern ssize_t part_stat_show(struct device *dev, struct device_attribute *attr, char *buf); +extern ssize_t part_inflight_show(struct device *dev, + struct device_attribute *attr, char *buf); #ifdef CONFIG_FAIL_MAKE_REQUEST extern ssize_t part_fail_show(struct device *dev, struct device_attribute *attr, char *buf); -- cgit v1.2.3 From 3c5820c743479285ce2678fd3c12b1fd39fe998f Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Fri, 11 Sep 2009 21:54:52 +0200 Subject: block: Optimal I/O limit wrapper Implement blk_limits_io_opt() and make blk_queue_io_opt() a wrapper around it. DM needs this to avoid poking at the queue_limits directly. Signed-off-by: Martin K. Petersen Signed-off-by: Mike Snitzer Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 8bf1a10e4d88..86c2bdff3b89 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -935,6 +935,7 @@ extern void blk_queue_alignment_offset(struct request_queue *q, unsigned int alignment); extern void blk_limits_io_min(struct queue_limits *limits, unsigned int min); extern void blk_queue_io_min(struct request_queue *q, unsigned int min); +extern void blk_limits_io_opt(struct queue_limits *limits, unsigned int opt); extern void blk_queue_io_opt(struct request_queue *q, unsigned int opt); extern void blk_set_default_limits(struct queue_limits *lim); extern int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, -- cgit v1.2.3 From 3d2257f157c2324acbc0fa0fa54e8626a987edd2 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sat, 12 Sep 2009 07:35:37 +0200 Subject: Make DISCARD_BARRIER and DISCARD_NOBARRIER writes instead of reads The commands are conceptually writes, and in the case of IDE and SCSI commands actually are writes. They were only reads because we thought that would interact better with the elevators. Now the elevators know about discard requests, that advantage no longer exists. Signed-off-by: David Woodhouse Signed-off-by: Matthew Wilcox Signed-off-by: Jens Axboe --- include/linux/fs.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index c1f993515f51..7f5a8ad25008 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -161,8 +161,8 @@ struct inodes_stat_t { * These aren't really reads or writes, they pass down information about * parts of device that are now unused by the file system. */ -#define DISCARD_NOBARRIER (1 << BIO_RW_DISCARD) -#define DISCARD_BARRIER ((1 << BIO_RW_DISCARD) | (1 << BIO_RW_BARRIER)) +#define DISCARD_NOBARRIER (WRITE | (1 << BIO_RW_DISCARD)) +#define DISCARD_BARRIER (DISCARD_NOBARRIER | (1 << BIO_RW_BARRIER)) #define SEL_IN 1 #define SEL_OUT 2 -- cgit v1.2.3 From 746cd1e7e4a555ddaee53b19a46e05c9c61eaf09 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sat, 12 Sep 2009 07:35:43 +0200 Subject: block: use blkdev_issue_discard in blk_ioctl_discard blk_ioctl_discard duplicates large amounts of code from blkdev_issue_discard, the only difference between the two is that blkdev_issue_discard needs to send a barrier discard request and blk_ioctl_discard a non-barrier one, and blk_ioctl_discard needs to wait on the request. To facilitates this add a flags argument to blkdev_issue_discard to control both aspects of the behaviour. This will be very useful later on for using the waiting funcitonality for other callers. Based on an earlier patch from Matthew Wilcox . Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 86c2bdff3b89..e23a86cae5ac 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -998,15 +998,18 @@ static inline struct request *blk_map_queue_find_tag(struct blk_queue_tag *bqt, } extern int blkdev_issue_flush(struct block_device *, sector_t *); -extern int blkdev_issue_discard(struct block_device *, - sector_t sector, sector_t nr_sects, gfp_t); +#define DISCARD_FL_WAIT 0x01 /* wait for completion */ +#define DISCARD_FL_BARRIER 0x02 /* issue DISCARD_BARRIER request */ +extern int blkdev_issue_discard(struct block_device *, sector_t sector, + sector_t nr_sects, gfp_t, int flags); static inline int sb_issue_discard(struct super_block *sb, sector_t block, sector_t nr_blocks) { block <<= (sb->s_blocksize_bits - 9); nr_blocks <<= (sb->s_blocksize_bits - 9); - return blkdev_issue_discard(sb->s_bdev, block, nr_blocks, GFP_KERNEL); + return blkdev_issue_discard(sb->s_bdev, block, nr_blocks, GFP_KERNEL, + DISCARD_FL_BARRIER); } extern int blk_verify_command(unsigned char *cmd, fmode_t has_write_perm); -- cgit v1.2.3 From d3bccb6f4b886060aa0f58976b92b77d951f5434 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 17 Aug 2009 19:30:27 +0200 Subject: vfs: Introduce filemap_fdatawait_range This simple helper saves some filesystems conversion from byte offset to page numbers and also makes the fdata* interface more complete. Reviewed-by: Christoph Hellwig Signed-off-by: Jan Kara --- include/linux/fs.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index a79f48373e7e..beb0e2774b2e 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2086,6 +2086,8 @@ extern int write_inode_now(struct inode *, int); extern int filemap_fdatawrite(struct address_space *); extern int filemap_flush(struct address_space *); extern int filemap_fdatawait(struct address_space *); +extern int filemap_fdatawait_range(struct address_space *, loff_t lstart, + loff_t lend); extern int filemap_write_and_wait(struct address_space *mapping); extern int filemap_write_and_wait_range(struct address_space *mapping, loff_t lstart, loff_t lend); -- cgit v1.2.3 From e4dd9de3c66bc7e26c5c7f149a060c5a67cf06a0 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 17 Aug 2009 18:10:06 +0200 Subject: vfs: Export __generic_file_aio_write() and add some comments Rename __generic_file_aio_write_nolock() to __generic_file_aio_write(), add comments to write helpers explaining how they should be used and export __generic_file_aio_write() since it will be used by some filesystems. CC: ocfs2-devel@oss.oracle.com CC: Joel Becker Acked-by: Evgeniy Polyakov Reviewed-by: Christoph Hellwig Signed-off-by: Jan Kara --- include/linux/fs.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index beb0e2774b2e..ea099d3a18d9 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2204,6 +2204,8 @@ extern int generic_file_readonly_mmap(struct file *, struct vm_area_struct *); extern int file_read_actor(read_descriptor_t * desc, struct page *page, unsigned long offset, unsigned long size); int generic_write_checks(struct file *file, loff_t *pos, size_t *count, int isblk); extern ssize_t generic_file_aio_read(struct kiocb *, const struct iovec *, unsigned long, loff_t); +extern ssize_t __generic_file_aio_write(struct kiocb *, const struct iovec *, unsigned long, + loff_t *); extern ssize_t generic_file_aio_write(struct kiocb *, const struct iovec *, unsigned long, loff_t); extern ssize_t generic_file_aio_write_nolock(struct kiocb *, const struct iovec *, unsigned long, loff_t); -- cgit v1.2.3 From eef99380679e20e7edc096aa4d8a98b875404d79 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 20 Aug 2009 17:43:41 +0200 Subject: vfs: Rename generic_file_aio_write_nolock generic_file_aio_write_nolock() is now used only by block devices and raw character device. Filesystems should use __generic_file_aio_write() in case generic_file_aio_write() doesn't suit them. So rename the function to blkdev_aio_write() and move it to fs/blockdev.c. Signed-off-by: Christoph Hellwig Signed-off-by: Jan Kara --- include/linux/fs.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index ea099d3a18d9..6c1be3a4edea 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2207,8 +2207,6 @@ extern ssize_t generic_file_aio_read(struct kiocb *, const struct iovec *, unsig extern ssize_t __generic_file_aio_write(struct kiocb *, const struct iovec *, unsigned long, loff_t *); extern ssize_t generic_file_aio_write(struct kiocb *, const struct iovec *, unsigned long, loff_t); -extern ssize_t generic_file_aio_write_nolock(struct kiocb *, const struct iovec *, - unsigned long, loff_t); extern ssize_t generic_file_direct_write(struct kiocb *, const struct iovec *, unsigned long *, loff_t, loff_t *, size_t, size_t); extern ssize_t generic_file_buffered_write(struct kiocb *, const struct iovec *, @@ -2218,6 +2216,10 @@ extern ssize_t do_sync_write(struct file *filp, const char __user *buf, size_t l extern int generic_segment_checks(const struct iovec *iov, unsigned long *nr_segs, size_t *count, int access_flags); +/* fs/block_dev.c */ +extern ssize_t blkdev_aio_write(struct kiocb *iocb, const struct iovec *iov, + unsigned long nr_segs, loff_t pos); + /* fs/splice.c */ extern ssize_t generic_file_splice_read(struct file *, loff_t *, struct pipe_inode_info *, size_t, unsigned int); -- cgit v1.2.3 From 148f948ba877f4d3cdef036b1ff6d9f68986706a Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 17 Aug 2009 19:52:36 +0200 Subject: vfs: Introduce new helpers for syncing after writing to O_SYNC file or IS_SYNC inode Introduce new function for generic inode syncing (vfs_fsync_range) and use it from fsync() path. Introduce also new helper for syncing after a sync write (generic_write_sync) using the generic function. Use these new helpers for syncing from generic VFS functions. This makes O_SYNC writes to block devices acquire i_mutex for syncing. If we really care about this, we can make block_fsync() drop the i_mutex and reacquire it before it returns. CC: Evgeniy Polyakov CC: ocfs2-devel@oss.oracle.com CC: Joel Becker CC: Felix Blyakher CC: xfs@oss.sgi.com CC: Anton Altaparmakov CC: linux-ntfs-dev@lists.sourceforge.net CC: OGAWA Hirofumi CC: linux-ext4@vger.kernel.org CC: tytso@mit.edu Acked-by: Christoph Hellwig Signed-off-by: Jan Kara --- include/linux/fs.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 6c1be3a4edea..e2c7f5167662 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2098,7 +2098,10 @@ extern int __filemap_fdatawrite_range(struct address_space *mapping, extern int filemap_fdatawrite_range(struct address_space *mapping, loff_t start, loff_t end); +extern int vfs_fsync_range(struct file *file, struct dentry *dentry, + loff_t start, loff_t end, int datasync); extern int vfs_fsync(struct file *file, struct dentry *dentry, int datasync); +extern int generic_write_sync(struct file *file, loff_t pos, loff_t count); extern void sync_supers(void); extern void emergency_sync(void); extern void emergency_remount(void); -- cgit v1.2.3 From 18f2ee705d98034b0f229a3202d827468d4bffd9 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Tue, 18 Aug 2009 18:43:15 +0200 Subject: vfs: Remove generic_osync_inode() and sync_page_range{_nolock}() Remove these three functions since nobody uses them anymore. Signed-off-by: Jan Kara --- include/linux/fs.h | 5 ----- include/linux/writeback.h | 4 ---- 2 files changed, 9 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index e2c7f5167662..37f53216998a 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1455,11 +1455,6 @@ int fiemap_check_flags(struct fiemap_extent_info *fieinfo, u32 fs_flags); #define DT_SOCK 12 #define DT_WHT 14 -#define OSYNC_METADATA (1<<0) -#define OSYNC_DATA (1<<1) -#define OSYNC_INODE (1<<2) -int generic_osync_inode(struct inode *, struct address_space *, int); - /* * This is the "filldir" function type, used by readdir() to let * the kernel specify what kind of dirent layout it wants to have. diff --git a/include/linux/writeback.h b/include/linux/writeback.h index 78b1e4684cc9..d347632f1861 100644 --- a/include/linux/writeback.h +++ b/include/linux/writeback.h @@ -150,10 +150,6 @@ int write_cache_pages(struct address_space *mapping, struct writeback_control *wbc, writepage_t writepage, void *data); int do_writepages(struct address_space *mapping, struct writeback_control *wbc); -int sync_page_range(struct inode *inode, struct address_space *mapping, - loff_t pos, loff_t count); -int sync_page_range_nolock(struct inode *inode, struct address_space *mapping, - loff_t pos, loff_t count); void set_page_dirty_balance(struct page *page, int page_mkwrite); void writeback_set_ratelimit(void); -- cgit v1.2.3 From 7f53866932fd08add06ee2f93ead129949158490 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Thu, 10 Sep 2009 12:34:09 -0600 Subject: PCI Hotplug: convert acpi_pci_detect_ejectable() to take an acpi_handle acpi_pci_detect_ejectable() goes through effort to convert its struct pci_bus arg to an acpi_handle, but every time we use this interface, we already have the handle available. So let's just use the handle instead of converting back and forth. Reviewed-by: Kenji Kaneshige Tested-by: Kenji Kaneshige Signed-off-by: Alex Chiang Signed-off-by: Jesse Barnes --- include/linux/pci_hotplug.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h index 1b00cc3177fc..f0c31ae3f842 100644 --- a/include/linux/pci_hotplug.h +++ b/include/linux/pci_hotplug.h @@ -231,7 +231,7 @@ extern acpi_status acpi_get_hp_params_from_firmware(struct pci_bus *bus, struct hotplug_params *hpp); int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags); int acpi_pci_check_ejectable(struct pci_bus *pbus, acpi_handle handle); -int acpi_pci_detect_ejectable(struct pci_bus *pbus); +int acpi_pci_detect_ejectable(acpi_handle handle); #endif #endif -- cgit v1.2.3 From 9d62ec6ca71d71c8a0d2cb1004f476d33f668955 Mon Sep 17 00:00:00 2001 From: Albin Tonnerre Date: Wed, 5 Aug 2009 23:59:59 +0200 Subject: PM: Add convenience macro to make switching to dev_pm_ops less error-prone In a number of cases, the .suspend, .freeze, .poweroff and .resume, .thaw, .restore functions are identical. However, they all need to be assigned to avoid regressionsm as the previous code called .suspend resp. .resume in all those cases. SIMPLE_DEV_PM_OPS helps to deal with this case. [rjw: Changed the name of the macro and added the comment explaining its purpose.] Signed-off-by: Albin Tonnerre Signed-off-by: Rafael J. Wysocki --- include/linux/pm.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pm.h b/include/linux/pm.h index 2b6e20df0e52..3b7e04b95bd2 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -213,6 +213,20 @@ struct dev_pm_ops { int (*runtime_idle)(struct device *dev); }; +/* + * Use this if you want to use the same suspend and resume callbacks for suspend + * to RAM and hibernation. + */ +#define SIMPLE_DEV_PM_OPS(name, suspend_fn, resume_fn) \ +struct dev_pm_ops name = { \ + .suspend = suspend_fn, \ + .resume = resume_fn, \ + .freeze = suspend_fn, \ + .thaw = resume_fn, \ + .poweroff = suspend_fn, \ + .restore = resume_fn, \ +} + /** * PM_EVENT_ messages * -- cgit v1.2.3 From d136f1bd366fdb7e747ca7e0218171e7a00a98a5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 12 Sep 2009 03:03:15 +0000 Subject: genetlink: fix netns vs. netlink table locking Since my commits introducing netns awareness into genetlink we can get this problem: BUG: scheduling while atomic: modprobe/1178/0x00000002 2 locks held by modprobe/1178: #0: (genl_mutex){+.+.+.}, at: [] genl_register_mc_grou #1: (rcu_read_lock){.+.+..}, at: [] genl_register_mc_g Pid: 1178, comm: modprobe Not tainted 2.6.31-rc8-wl-34789-g95cb731-dirty # Call Trace: [] __schedule_bug+0x85/0x90 [] schedule+0x108/0x588 [] netlink_table_grab+0xa1/0xf0 [] netlink_change_ngroups+0x47/0x100 [] genl_register_mc_group+0x12f/0x290 because I overlooked that netlink_table_grab() will schedule, thinking it was just the rwlock. However, in the contention case, that isn't actually true. Fix this by letting the code grab the netlink table lock first and then the RCU for netns protection. Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- include/linux/netlink.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netlink.h b/include/linux/netlink.h index 0fbecbbe8e9e..080f6ba9e73a 100644 --- a/include/linux/netlink.h +++ b/include/linux/netlink.h @@ -176,12 +176,16 @@ struct netlink_skb_parms #define NETLINK_CREDS(skb) (&NETLINK_CB((skb)).creds) +extern void netlink_table_grab(void); +extern void netlink_table_ungrab(void); + extern struct sock *netlink_kernel_create(struct net *net, int unit,unsigned int groups, void (*input)(struct sk_buff *skb), struct mutex *cb_mutex, struct module *module); extern void netlink_kernel_release(struct sock *sk); +extern int __netlink_change_ngroups(struct sock *sk, unsigned int groups); extern int netlink_change_ngroups(struct sock *sk, unsigned int groups); extern void netlink_clear_multicast_users(struct sock *sk, unsigned int group); extern void netlink_ack(struct sk_buff *in_skb, struct nlmsghdr *nlh, int err); -- cgit v1.2.3 From 6a29172ba90e49c046245610caff9848307bfd6a Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 14 Sep 2009 16:35:15 -0600 Subject: PCI hotplug: clean up acpi_get_hp_params_from_firmware() interface This patch makes acpi_get_hp_params_from_firmware() take a pci_dev rather than a pci_bus and makes it return a standard int errno rather than acpi_status. Signed-off-by: Bjorn Helgaas Reviewed-by: Kenji Kaneshige Acked-by: Kenji Kaneshige Signed-off-by: Jesse Barnes --- include/linux/pci_hotplug.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h index f0c31ae3f842..0a7c2401d945 100644 --- a/include/linux/pci_hotplug.h +++ b/include/linux/pci_hotplug.h @@ -227,7 +227,7 @@ struct hotplug_params { #ifdef CONFIG_ACPI #include #include -extern acpi_status acpi_get_hp_params_from_firmware(struct pci_bus *bus, +int acpi_get_hp_params_from_firmware(struct pci_dev *dev, struct hotplug_params *hpp); int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags); int acpi_pci_check_ejectable(struct pci_bus *pbus, acpi_handle handle); -- cgit v1.2.3 From 8838400db5193c37588813c2eb1249b821781950 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 14 Sep 2009 16:35:20 -0600 Subject: PCI hotplug: add pci_configure_slot() This patch adds a new pci_configure_slot() function that programs the PCI bus characteristics for a newly-added device. This is based on code in pciehp_pci.c, but should be generic enough to be used by pciehp, shpchp, and acpiphp. The hotplug_params struct and the program_hpp_typeX() functions are based on the ACPI definitions, but they aren't really ACPI-specific, and there's no alternate implementation, so I don't see the need to abstract them yet. Signed-off-by: Bjorn Helgaas Reviewed-by: Alex Chiang Reviewed-by: Kenji Kaneshige Acked-by: Kenji Kaneshige Signed-off-by: Jesse Barnes --- include/linux/pci_hotplug.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h index 0a7c2401d945..1cdef8317377 100644 --- a/include/linux/pci_hotplug.h +++ b/include/linux/pci_hotplug.h @@ -232,6 +232,15 @@ int acpi_get_hp_params_from_firmware(struct pci_dev *dev, int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags); int acpi_pci_check_ejectable(struct pci_bus *pbus, acpi_handle handle); int acpi_pci_detect_ejectable(acpi_handle handle); +#define pci_get_hp_params(dev, hpp) acpi_get_hp_params_from_firmware(dev, hpp) +#else +static inline int pci_get_hp_params(struct pci_dev *dev, + struct hotplug_params *hpp) +{ + return -ENODEV; +} #endif + +void pci_configure_slot(struct pci_dev *dev); #endif -- cgit v1.2.3 From e81995bb1c0077a312cb621abc406a36f65a986a Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 14 Sep 2009 16:35:35 -0600 Subject: PCI hotplug: acpiphp: use generic pci_configure_slot() Use the generic pci_configure_slot() rather than the acpiphp-specific decode_hpp() and program_hpp(). Unlike the previous acpiphp-specific code, pci_configure_slot() programs PCIe settings when an _HPX method provides them, so acpiphp-managed PCIe devices can now be configured. Signed-off-by: Bjorn Helgaas Reviewed-by: Kenji Kaneshige Acked-by: Kenji Kaneshige Signed-off-by: Jesse Barnes --- include/linux/pci_hotplug.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h index 1cdef8317377..652ba797696d 100644 --- a/include/linux/pci_hotplug.h +++ b/include/linux/pci_hotplug.h @@ -227,12 +227,10 @@ struct hotplug_params { #ifdef CONFIG_ACPI #include #include -int acpi_get_hp_params_from_firmware(struct pci_dev *dev, - struct hotplug_params *hpp); +int pci_get_hp_params(struct pci_dev *dev, struct hotplug_params *hpp); int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags); int acpi_pci_check_ejectable(struct pci_bus *pbus, acpi_handle handle); int acpi_pci_detect_ejectable(acpi_handle handle); -#define pci_get_hp_params(dev, hpp) acpi_get_hp_params_from_firmware(dev, hpp) #else static inline int pci_get_hp_params(struct pci_dev *dev, struct hotplug_params *hpp) -- cgit v1.2.3 From 353f6dd2dec992ddd34620a94b051b0f76227379 Mon Sep 17 00:00:00 2001 From: Anirban Sinha Date: Mon, 14 Sep 2009 11:13:37 -0700 Subject: cleanup console_print() console_print() is an old legacy interface mostly unused in the entire kernel tree. It's best to clean up its existing use and let developers use their own implementation of it as they feel fit. Signed-off-by: Anirban Sinha Signed-off-by: Linus Torvalds --- include/linux/dtlk.h | 19 ------------------- include/linux/tty.h | 4 ---- 2 files changed, 23 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dtlk.h b/include/linux/dtlk.h index 2896d90118a9..22a7b9a5f5d1 100644 --- a/include/linux/dtlk.h +++ b/include/linux/dtlk.h @@ -1,22 +1,3 @@ -#if 0 - -#define TRACE_TXT(text) \ - { \ - if(dtlk_trace) \ - { \ - console_print(text); \ - console_print("\n"); \ - } \ - } - -#define TRACE_CHR(chr) \ - { \ - if(dtlk_trace) \ - console_print(chr); \ - } \ - -#endif - #define DTLK_MINOR 0 #define DTLK_IO_EXTENT 0x02 diff --git a/include/linux/tty.h b/include/linux/tty.h index 0d3974f59c53..a916a318004e 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -519,10 +519,6 @@ extern void serial_console_init(void); extern int pcxe_open(struct tty_struct *tty, struct file *filp); -/* printk.c */ - -extern void console_print(const char *); - /* vt.c */ extern int vt_ioctl(struct tty_struct *tty, struct file *file, -- cgit v1.2.3 From 8a478905adbb2e09a59644e76f7fe7e0ab644204 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Mon, 14 Sep 2009 20:59:48 -0400 Subject: SELinux: inline selinux_is_enabled in !CONFIG_SECURITY_SELINUX Without this patch building a kernel emits millions of warning like: include/linux/selinux.h:92: warning: ?selinux_is_enabled? defined but not used When it is build without CONFIG_SECURITY_SELINUX. This is harmless, but the function should be inlined, so it gets compiled out. Reported-by: Linus Torvalds Signed-off-by: Eric Paris Signed-off-by: James Morris --- include/linux/selinux.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/selinux.h b/include/linux/selinux.h index 223d06a6feb1..82e0f26a1299 100644 --- a/include/linux/selinux.h +++ b/include/linux/selinux.h @@ -89,7 +89,7 @@ static inline void selinux_secmark_refcount_dec(void) return; } -static bool selinux_is_enabled(void) +static inline bool selinux_is_enabled(void) { return false; } -- cgit v1.2.3 From 12e09337fe238981cb0c87543306e23775d1a143 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 14 Sep 2009 23:37:40 +0200 Subject: time: Prevent 32 bit overflow with set_normalized_timespec() set_normalized_timespec() nsec argument is of type long. The recent timekeeping changes of ktime_get_ts() feed ts->tv_nsec + tomono.tv_nsec + nsecs to set_normalized_timespec(). On 32 bit machines that sum can be larger than (1 << 31) and therefor result in a negative value which screws up the result completely. Make the nsec argument of set_normalized_timespec() s64 to fix the problem at hand. This also prevents similar problems for future users of set_normalized_timespec(). Signed-off-by: Thomas Gleixner Tested-by: Carsten Emde LKML-Reference: Cc: Martin Schwidefsky Cc: John Stultz --- include/linux/time.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/time.h b/include/linux/time.h index 256232f7e5e6..56787c093345 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -75,7 +75,7 @@ extern unsigned long mktime(const unsigned int year, const unsigned int mon, const unsigned int day, const unsigned int hour, const unsigned int min, const unsigned int sec); -extern void set_normalized_timespec(struct timespec *ts, time_t sec, long nsec); +extern void set_normalized_timespec(struct timespec *ts, time_t sec, s64 nsec); extern struct timespec timespec_add_safe(const struct timespec lhs, const struct timespec rhs); -- cgit v1.2.3 From 75c78500ddad74b229cd0691496b8549490496a2 Mon Sep 17 00:00:00 2001 From: Moni Shoua Date: Tue, 15 Sep 2009 02:37:40 -0700 Subject: bonding: remap muticast addresses without using dev_close() and dev_open() This patch fixes commit e36b9d16c6a6d0f59803b3ef04ff3c22c3844c10. The approach there is to call dev_close()/dev_open() whenever the device type is changed in order to remap the device IP multicast addresses to HW multicast addresses. This approach suffers from 2 drawbacks: *. It assumes tha the device is UP when calling dev_close(), or otherwise dev_close() has no affect. It is worth to mention that initscripts (Redhat) and sysconfig (Suse) doesn't act the same in this matter. *. dev_close() has other side affects, like deleting entries from the routing table, which might be unnecessary. The fix here is to directly remap the IP multicast addresses to HW multicast addresses for a bonding device that changes its type, and nothing else. Reported-by: Jason Gunthorpe Signed-off-by: Moni Shoua Signed-off-by: David S. Miller --- include/linux/igmp.h | 2 ++ include/linux/netdevice.h | 3 ++- include/linux/notifier.h | 2 ++ 3 files changed, 6 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/igmp.h b/include/linux/igmp.h index 92fbd8cbd68f..fe158e0e20e6 100644 --- a/include/linux/igmp.h +++ b/include/linux/igmp.h @@ -233,6 +233,8 @@ extern void ip_mc_init_dev(struct in_device *); extern void ip_mc_destroy_dev(struct in_device *); extern void ip_mc_up(struct in_device *); extern void ip_mc_down(struct in_device *); +extern void ip_mc_unmap(struct in_device *); +extern void ip_mc_remap(struct in_device *); extern void ip_mc_dec_group(struct in_device *in_dev, __be32 addr); extern void ip_mc_inc_group(struct in_device *in_dev, __be32 addr); extern void ip_mc_rejoin_group(struct ip_mc_list *im); diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 65ee1929b2b1..f46db6c7a734 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1873,7 +1873,8 @@ extern void __dev_addr_unsync(struct dev_addr_list **to, int *to_count, struct extern int dev_set_promiscuity(struct net_device *dev, int inc); extern int dev_set_allmulti(struct net_device *dev, int inc); extern void netdev_state_change(struct net_device *dev); -extern void netdev_bonding_change(struct net_device *dev); +extern void netdev_bonding_change(struct net_device *dev, + unsigned long event); extern void netdev_features_change(struct net_device *dev); /* Load a device via the kmod */ extern void dev_load(struct net *net, const char *name); diff --git a/include/linux/notifier.h b/include/linux/notifier.h index 81bc252dc8ac..44428d247dbe 100644 --- a/include/linux/notifier.h +++ b/include/linux/notifier.h @@ -199,6 +199,8 @@ static inline int notifier_to_errno(int ret) #define NETDEV_FEAT_CHANGE 0x000B #define NETDEV_BONDING_FAILOVER 0x000C #define NETDEV_PRE_UP 0x000D +#define NETDEV_BONDING_OLDTYPE 0x000E +#define NETDEV_BONDING_NEWTYPE 0x000F #define SYS_DOWN 0x0001 /* Notify of system down */ #define SYS_RESTART SYS_DOWN -- cgit v1.2.3 From 29a020d35f629619c67fa5e32acaaac3f8a1ba90 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 15 Sep 2009 02:39:20 -0700 Subject: [PATCH] net: kmemcheck annotation in struct socket struct socket has a 16 bit hole that triggers kmemcheck warnings. As suggested by Ingo, use kmemcheck annotations Signed-off-by: Eric Dumazet Acked-by: Ingo Molnar Signed-off-by: David S. Miller --- include/linux/net.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/net.h b/include/linux/net.h index 4fc2ffd527f9..9040a10584f7 100644 --- a/include/linux/net.h +++ b/include/linux/net.h @@ -57,6 +57,7 @@ typedef enum { #include #include #include /* For O_CLOEXEC and O_NONBLOCK */ +#include struct poll_table_struct; struct pipe_inode_info; @@ -127,7 +128,11 @@ enum sock_shutdown_cmd { */ struct socket { socket_state state; + + kmemcheck_bitfield_begin(type); short type; + kmemcheck_bitfield_end(type); + unsigned long flags; /* * Please keep fasync_list & wait fields in the same cache line -- cgit v1.2.3 From 8b815477f382f96deefbe5bd4404fa7b31cf5dcf Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 14 Sep 2009 01:17:30 +0000 Subject: RxRPC: Declare the security index constants symbolically Declare the security index constants symbolically rather than just referring to them numerically. Signed-off-by: David Howells Signed-off-by: David S. Miller --- include/linux/rxrpc.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/rxrpc.h b/include/linux/rxrpc.h index f7b826b565c7..a53915cd5581 100644 --- a/include/linux/rxrpc.h +++ b/include/linux/rxrpc.h @@ -58,5 +58,12 @@ struct sockaddr_rxrpc { #define RXRPC_SECURITY_AUTH 1 /* authenticated packets */ #define RXRPC_SECURITY_ENCRYPT 2 /* encrypted packets */ +/* + * RxRPC security indices + */ +#define RXRPC_SECURITY_NONE 0 /* no security protocol */ +#define RXRPC_SECURITY_RXKAD 2 /* kaserver or kerberos 4 */ +#define RXRPC_SECURITY_RXGK 4 /* gssapi-based */ +#define RXRPC_SECURITY_RXK5 5 /* kerberos 5 */ #endif /* _LINUX_RXRPC_H */ -- cgit v1.2.3 From 5f3edc1b1ead6d9bd45a85c551f44eff8fe76b9f Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 10 Sep 2009 13:42:00 +0200 Subject: sched: Hook sched_balance_self() into sched_class::select_task_rq() Rather ugly patch to fully place the sched_balance_self() code inside the fair class. Signed-off-by: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- include/linux/sched.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index f3d74bd04d18..5d3c9900943e 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -811,6 +811,7 @@ enum cpu_idle_type { #define SD_SERIALIZE 0x0400 /* Only a single load balancing instance */ #define SD_WAKE_IDLE_FAR 0x0800 /* Gain latency sacrificing cache hit */ #define SD_PREFER_SIBLING 0x1000 /* Prefer to place tasks in a sibling domain */ +#define SD_BALANCE_WAKE 0x2000 /* Balance on wakeup */ enum powersavings_balance_level { POWERSAVINGS_BALANCE_NONE = 0, /* No power saving load balance */ @@ -1032,7 +1033,7 @@ struct sched_class { void (*put_prev_task) (struct rq *rq, struct task_struct *p); #ifdef CONFIG_SMP - int (*select_task_rq)(struct task_struct *p, int sync); + int (*select_task_rq)(struct task_struct *p, int flag, int sync); unsigned long (*load_balance) (struct rq *this_rq, int this_cpu, struct rq *busiest, unsigned long max_load_move, -- cgit v1.2.3 From e9c8431185d6c406887190519f6dbdd112641686 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 15 Sep 2009 14:43:03 +0200 Subject: sched: Add TASK_WAKING We're going to want to drop rq->lock in try_to_wake_up() for a longer period of time, however we also want to deal with concurrent waking of the same task, which is currently handled by holding rq->lock. So introduce a new TASK state, namely TASK_WAKING, which indicates someone is already waking the task (other wakers will fail p->state & state). We also keep preemption disabled over the whole ttwu(). Signed-off-by: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- include/linux/sched.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 5d3c9900943e..3b0ca66bd6ce 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -190,6 +190,7 @@ extern unsigned long long time_sync_thresh; /* in tsk->state again */ #define TASK_DEAD 64 #define TASK_WAKEKILL 128 +#define TASK_WAKING 256 /* Convenience macros for the sake of set_task_state */ #define TASK_KILLABLE (TASK_WAKEKILL | TASK_UNINTERRUPTIBLE) -- cgit v1.2.3 From c88d5910890ad35af283344417891344604f0438 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 10 Sep 2009 13:50:02 +0200 Subject: sched: Merge select_task_rq_fair() and sched_balance_self() The problem with wake_idle() is that is doesn't respect things like cpu_power, which means it doesn't deal well with SMT nor the recent RT interaction. To cure this, it needs to do what sched_balance_self() does, which leads to the possibility of merging select_task_rq_fair() and sched_balance_self(). Modify sched_balance_self() to: - update_shares() when walking up the domain tree, (it only called it for the top domain, but it should have done this anyway), which allows us to remove this ugly bit from try_to_wake_up(). - do wake_affine() on the smallest domain that contains both this (the waking) and the prev (the wakee) cpu for WAKE invocations. Then use the top-down balance steps it had to replace wake_idle(). This leads to the dissapearance of SD_WAKE_BALANCE and SD_WAKE_IDLE_FAR, with SD_WAKE_IDLE replaced with SD_BALANCE_WAKE. SD_WAKE_AFFINE needs SD_BALANCE_WAKE to be effective. Touch all topology bits to replace the old with new SD flags -- platforms might need re-tuning, enabling SD_BALANCE_WAKE conditionally on a NUMA distance seems like a good additional feature, magny-core and small nehalem systems would want this enabled, systems with slow interconnects would not. Signed-off-by: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- include/linux/sched.h | 7 +++---- include/linux/topology.h | 16 ++++------------ 2 files changed, 7 insertions(+), 16 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 3b0ca66bd6ce..c30bf3d516d1 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -803,16 +803,15 @@ enum cpu_idle_type { #define SD_BALANCE_NEWIDLE 0x0002 /* Balance when about to become idle */ #define SD_BALANCE_EXEC 0x0004 /* Balance on exec */ #define SD_BALANCE_FORK 0x0008 /* Balance on fork, clone */ -#define SD_WAKE_IDLE 0x0010 /* Wake to idle CPU on task wakeup */ +#define SD_BALANCE_WAKE 0x0010 /* Balance on wakeup */ #define SD_WAKE_AFFINE 0x0020 /* Wake task to waking CPU */ -#define SD_WAKE_BALANCE 0x0040 /* Perform balancing at task wakeup */ + #define SD_SHARE_CPUPOWER 0x0080 /* Domain members share cpu power */ #define SD_POWERSAVINGS_BALANCE 0x0100 /* Balance for power savings */ #define SD_SHARE_PKG_RESOURCES 0x0200 /* Domain members share cpu pkg resources */ #define SD_SERIALIZE 0x0400 /* Only a single load balancing instance */ -#define SD_WAKE_IDLE_FAR 0x0800 /* Gain latency sacrificing cache hit */ + #define SD_PREFER_SIBLING 0x1000 /* Prefer to place tasks in a sibling domain */ -#define SD_BALANCE_WAKE 0x2000 /* Balance on wakeup */ enum powersavings_balance_level { POWERSAVINGS_BALANCE_NONE = 0, /* No power saving load balance */ diff --git a/include/linux/topology.h b/include/linux/topology.h index 85e8cf7d393c..6a8cd15555bb 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -95,14 +95,12 @@ int arch_update_cpu_topology(void); | 1*SD_BALANCE_NEWIDLE \ | 1*SD_BALANCE_EXEC \ | 1*SD_BALANCE_FORK \ - | 0*SD_WAKE_IDLE \ + | 1*SD_BALANCE_WAKE \ | 1*SD_WAKE_AFFINE \ - | 1*SD_WAKE_BALANCE \ | 1*SD_SHARE_CPUPOWER \ | 0*SD_POWERSAVINGS_BALANCE \ | 0*SD_SHARE_PKG_RESOURCES \ | 0*SD_SERIALIZE \ - | 0*SD_WAKE_IDLE_FAR \ | 0*SD_PREFER_SIBLING \ , \ .last_balance = jiffies, \ @@ -129,13 +127,11 @@ int arch_update_cpu_topology(void); | 1*SD_BALANCE_NEWIDLE \ | 1*SD_BALANCE_EXEC \ | 1*SD_BALANCE_FORK \ - | 1*SD_WAKE_IDLE \ + | 1*SD_BALANCE_WAKE \ | 1*SD_WAKE_AFFINE \ - | 1*SD_WAKE_BALANCE \ | 0*SD_SHARE_CPUPOWER \ | 1*SD_SHARE_PKG_RESOURCES \ | 0*SD_SERIALIZE \ - | 0*SD_WAKE_IDLE_FAR \ | sd_balance_for_mc_power() \ | sd_power_saving_flags() \ , \ @@ -163,13 +159,11 @@ int arch_update_cpu_topology(void); | 1*SD_BALANCE_NEWIDLE \ | 1*SD_BALANCE_EXEC \ | 1*SD_BALANCE_FORK \ - | 1*SD_WAKE_IDLE \ + | 1*SD_BALANCE_WAKE \ | 0*SD_WAKE_AFFINE \ - | 1*SD_WAKE_BALANCE \ | 0*SD_SHARE_CPUPOWER \ | 0*SD_SHARE_PKG_RESOURCES \ | 0*SD_SERIALIZE \ - | 0*SD_WAKE_IDLE_FAR \ | sd_balance_for_package_power() \ | sd_power_saving_flags() \ , \ @@ -191,14 +185,12 @@ int arch_update_cpu_topology(void); | 1*SD_BALANCE_NEWIDLE \ | 0*SD_BALANCE_EXEC \ | 0*SD_BALANCE_FORK \ - | 0*SD_WAKE_IDLE \ + | 0*SD_BALANCE_WAKE \ | 1*SD_WAKE_AFFINE \ - | 0*SD_WAKE_BALANCE \ | 0*SD_SHARE_CPUPOWER \ | 0*SD_POWERSAVINGS_BALANCE \ | 0*SD_SHARE_PKG_RESOURCES \ | 1*SD_SERIALIZE \ - | 1*SD_WAKE_IDLE_FAR \ | 0*SD_PREFER_SIBLING \ , \ .last_balance = jiffies, \ -- cgit v1.2.3 From 78e7ed53c9f42f04f9401ada6f7047db60781676 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 3 Sep 2009 13:16:51 +0200 Subject: sched: Tweak wake_idx When merging select_task_rq_fair() and sched_balance_self() we lost the use of wake_idx, restore that and set them to 0 to make wake balancing more aggressive. Signed-off-by: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- include/linux/topology.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/topology.h b/include/linux/topology.h index 6a8cd15555bb..fef57040a4e2 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -120,7 +120,7 @@ int arch_update_cpu_topology(void); .imbalance_pct = 125, \ .cache_nice_tries = 1, \ .busy_idx = 2, \ - .wake_idx = 1, \ + .wake_idx = 0, \ .forkexec_idx = 1, \ \ .flags = 1*SD_LOAD_BALANCE \ @@ -152,7 +152,7 @@ int arch_update_cpu_topology(void); .busy_idx = 2, \ .idle_idx = 1, \ .newidle_idx = 2, \ - .wake_idx = 1, \ + .wake_idx = 0, \ .forkexec_idx = 1, \ \ .flags = 1*SD_LOAD_BALANCE \ -- cgit v1.2.3 From 6bd7821f905a8d6c471f0d6675f5cb7ea448d791 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 11 Sep 2009 18:42:15 +0200 Subject: sched: Fix some domain tunings CPU level should have WAKE_AFFINE, whereas ALLNODES is dubious. Signed-off-by: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- include/linux/topology.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/topology.h b/include/linux/topology.h index fef57040a4e2..c87edcd87967 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -160,7 +160,7 @@ int arch_update_cpu_topology(void); | 1*SD_BALANCE_EXEC \ | 1*SD_BALANCE_FORK \ | 1*SD_BALANCE_WAKE \ - | 0*SD_WAKE_AFFINE \ + | 1*SD_WAKE_AFFINE \ | 0*SD_SHARE_CPUPOWER \ | 0*SD_SHARE_PKG_RESOURCES \ | 0*SD_SERIALIZE \ @@ -186,7 +186,7 @@ int arch_update_cpu_topology(void); | 0*SD_BALANCE_EXEC \ | 0*SD_BALANCE_FORK \ | 0*SD_BALANCE_WAKE \ - | 1*SD_WAKE_AFFINE \ + | 0*SD_WAKE_AFFINE \ | 0*SD_SHARE_CPUPOWER \ | 0*SD_POWERSAVINGS_BALANCE \ | 0*SD_SHARE_PKG_RESOURCES \ -- cgit v1.2.3 From 0ec9fab3d186d9cbb00c0f694d4a260d07c198d9 Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Tue, 15 Sep 2009 15:07:03 +0200 Subject: sched: Improve latencies and throughput Make the idle balancer more agressive, to improve a x264 encoding workload provided by Jason Garrett-Glaser: NEXT_BUDDY NO_LB_BIAS encoded 600 frames, 252.82 fps, 22096.60 kb/s encoded 600 frames, 250.69 fps, 22096.60 kb/s encoded 600 frames, 245.76 fps, 22096.60 kb/s NO_NEXT_BUDDY LB_BIAS encoded 600 frames, 344.44 fps, 22096.60 kb/s encoded 600 frames, 346.66 fps, 22096.60 kb/s encoded 600 frames, 352.59 fps, 22096.60 kb/s NO_NEXT_BUDDY NO_LB_BIAS encoded 600 frames, 425.75 fps, 22096.60 kb/s encoded 600 frames, 425.45 fps, 22096.60 kb/s encoded 600 frames, 422.49 fps, 22096.60 kb/s Peter pointed out that this is better done via newidle_idx, not via LB_BIAS, newidle balancing should look for where there is load _now_, not where there was load 2 ticks ago. Worst-case latencies are improved as well as no buddies means less vruntime spread. (as per prior lkml discussions) This change improves kbuild-peak parallelism as well. Reported-by: Jason Garrett-Glaser Signed-off-by: Mike Galbraith Signed-off-by: Peter Zijlstra LKML-Reference: <1253011667.9128.16.camel@marge.simson.net> Signed-off-by: Ingo Molnar --- include/linux/topology.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/topology.h b/include/linux/topology.h index c87edcd87967..4298745615a5 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -151,7 +151,7 @@ int arch_update_cpu_topology(void); .cache_nice_tries = 1, \ .busy_idx = 2, \ .idle_idx = 1, \ - .newidle_idx = 2, \ + .newidle_idx = 0, \ .wake_idx = 0, \ .forkexec_idx = 1, \ \ -- cgit v1.2.3 From b8a543ea5a5896830a9969bacfd047f9d15940b2 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 15 Sep 2009 15:22:03 +0200 Subject: sched: Reduce forkexec_idx If we're looking to place a new task, we might as well find the idlest position _now_, not 1 tick ago. Signed-off-by: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- include/linux/topology.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/topology.h b/include/linux/topology.h index 4298745615a5..936ab2b37683 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -121,7 +121,7 @@ int arch_update_cpu_topology(void); .cache_nice_tries = 1, \ .busy_idx = 2, \ .wake_idx = 0, \ - .forkexec_idx = 1, \ + .forkexec_idx = 0, \ \ .flags = 1*SD_LOAD_BALANCE \ | 1*SD_BALANCE_NEWIDLE \ @@ -153,7 +153,7 @@ int arch_update_cpu_topology(void); .idle_idx = 1, \ .newidle_idx = 0, \ .wake_idx = 0, \ - .forkexec_idx = 1, \ + .forkexec_idx = 0, \ \ .flags = 1*SD_LOAD_BALANCE \ | 1*SD_BALANCE_NEWIDLE \ -- cgit v1.2.3 From 47fe38fcff0517e67d395c039d2e26d2de688a60 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 2 Sep 2009 13:49:18 +0200 Subject: x86: sched: Provide arch implementations using aperf/mperf APERF/MPERF support for cpu_power. APERF/MPERF is arch defined to be a relative scale of work capacity per logical cpu, this is assumed to include SMT and Turbo mode. APERF/MPERF are specified to both reset to 0 when either counter wraps, which is highly inconvenient, since that'll give a blimp when that happens. The manual specifies writing 0 to the counters after each read, but that's 1) too expensive, and 2) destroys the possibility of sharing these counters with other users, so we live with the blimp - the other existing user does too. Signed-off-by: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- include/linux/sched.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index c30bf3d516d1..fc4c0f9393d2 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -992,6 +992,9 @@ static inline int test_sd_parent(struct sched_domain *sd, int flag) return 0; } +unsigned long default_scale_freq_power(struct sched_domain *sd, int cpu); +unsigned long default_scale_smt_power(struct sched_domain *sd, int cpu); + #else /* CONFIG_SMP */ struct sched_domain_attr; @@ -1003,6 +1006,7 @@ partition_sched_domains(int ndoms_new, struct cpumask *doms_new, } #endif /* !CONFIG_SMP */ + struct io_context; /* See blkdev.h */ -- cgit v1.2.3 From 0763a660a84220cc3900fd32abdd7ad109e2278d Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 14 Sep 2009 19:37:39 +0200 Subject: sched: Rename select_task_rq() argument In order to be able to rename the sync argument, we need to rename the current flag argument. Signed-off-by: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- include/linux/sched.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index fc4c0f9393d2..5c116f03d74c 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1037,7 +1037,7 @@ struct sched_class { void (*put_prev_task) (struct rq *rq, struct task_struct *p); #ifdef CONFIG_SMP - int (*select_task_rq)(struct task_struct *p, int flag, int sync); + int (*select_task_rq)(struct task_struct *p, int sd_flag, int sync); unsigned long (*load_balance) (struct rq *this_rq, int this_cpu, struct rq *busiest, unsigned long max_load_move, -- cgit v1.2.3 From 7d47872146398dbede13223299fe1cb368ebc781 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 14 Sep 2009 19:55:44 +0200 Subject: sched: Rename sync arguments In order to extend the functions to have more than 1 flag (sync), rename the argument to flags, and explicitly define a WF_ space for individual flags. Signed-off-by: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- include/linux/sched.h | 9 +++++++-- include/linux/wait.h | 4 ++-- 2 files changed, 9 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 5c116f03d74c..3b07168b6f03 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1024,6 +1024,11 @@ struct uts_namespace; struct rq; struct sched_domain; +/* + * wake flags + */ +#define WF_SYNC 0x01 /* waker goes to sleep after wakup */ + struct sched_class { const struct sched_class *next; @@ -1031,13 +1036,13 @@ struct sched_class { void (*dequeue_task) (struct rq *rq, struct task_struct *p, int sleep); void (*yield_task) (struct rq *rq); - void (*check_preempt_curr) (struct rq *rq, struct task_struct *p, int sync); + void (*check_preempt_curr) (struct rq *rq, struct task_struct *p, int flags); struct task_struct * (*pick_next_task) (struct rq *rq); void (*put_prev_task) (struct rq *rq, struct task_struct *p); #ifdef CONFIG_SMP - int (*select_task_rq)(struct task_struct *p, int sd_flag, int sync); + int (*select_task_rq)(struct task_struct *p, int sd_flag, int flags); unsigned long (*load_balance) (struct rq *this_rq, int this_cpu, struct rq *busiest, unsigned long max_load_move, diff --git a/include/linux/wait.h b/include/linux/wait.h index cf3c2f5dba51..a48e16b77d5e 100644 --- a/include/linux/wait.h +++ b/include/linux/wait.h @@ -26,8 +26,8 @@ #include typedef struct __wait_queue wait_queue_t; -typedef int (*wait_queue_func_t)(wait_queue_t *wait, unsigned mode, int sync, void *key); -int default_wake_function(wait_queue_t *wait, unsigned mode, int sync, void *key); +typedef int (*wait_queue_func_t)(wait_queue_t *wait, unsigned mode, int flags, void *key); +int default_wake_function(wait_queue_t *wait, unsigned mode, int flags, void *key); struct __wait_queue { unsigned int flags; -- cgit v1.2.3 From a7558e01056f5191ff2ecff53b075dcb9e484188 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 14 Sep 2009 20:02:34 +0200 Subject: sched: Add WF_FORK Avoid the cache buddies from biasing the time distribution away from fork()ers. Normally the next buddy will be the preferred scheduling target, but this makes fork()s prefer to run the new child, whereas we prefer to run the parent, since that will generate more work. Signed-off-by: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- include/linux/sched.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 3b07168b6f03..ee1f88993097 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1028,6 +1028,7 @@ struct sched_domain; * wake flags */ #define WF_SYNC 0x01 /* waker goes to sleep after wakup */ +#define WF_FORK 0x02 /* child wakeup after fork */ struct sched_class { const struct sched_class *next; -- cgit v1.2.3 From 2f82af08fcc7dc01a7e98a49a5995a77e32a2925 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Mon, 14 Sep 2009 03:25:28 -0400 Subject: Nicolas Pitre has a new email address Due to problems at cam.org, my nico@cam.org email address is no longer valid. FRom now on, nico@fluxnic.net should be used instead. Signed-off-by: Nicolas Pitre Signed-off-by: Linus Torvalds --- include/linux/mtd/partitions.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h index b70313d33ff8..274b6196091d 100644 --- a/include/linux/mtd/partitions.h +++ b/include/linux/mtd/partitions.h @@ -1,7 +1,7 @@ /* * MTD partitioning layer definitions * - * (C) 2000 Nicolas Pitre + * (C) 2000 Nicolas Pitre * * This code is GPL */ -- cgit v1.2.3 From b4028437876866aba4747a655ede00f892089e14 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 11 May 2009 14:16:57 -0700 Subject: Driver core: move dev_get/set_drvdata to drivers/base/dd.c No one should directly access the driver_data field, so remove the field and make it private. We dynamically create the private field now if it is needed, to handle drivers that call get/set before they are registered with the driver core. Also update the copyright notices on these files while we are there. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- include/linux/device.h | 16 ++++------------ 1 file changed, 4 insertions(+), 12 deletions(-) (limited to 'include/linux') diff --git a/include/linux/device.h b/include/linux/device.h index a28642975053..c0bd23048be0 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -2,7 +2,8 @@ * device.h - generic, centralized driver model * * Copyright (c) 2001-2003 Patrick Mochel - * Copyright (c) 2004-2007 Greg Kroah-Hartman + * Copyright (c) 2004-2009 Greg Kroah-Hartman + * Copyright (c) 2008-2009 Novell Inc. * * This file is released under the GPLv2 * @@ -381,7 +382,6 @@ struct device { struct bus_type *bus; /* type of bus device is on */ struct device_driver *driver; /* which driver has allocated this device */ - void *driver_data; /* data private to the driver */ void *platform_data; /* Platform specific data, device core doesn't touch it */ struct dev_pm_info power; @@ -447,16 +447,6 @@ static inline void set_dev_node(struct device *dev, int node) } #endif -static inline void *dev_get_drvdata(const struct device *dev) -{ - return dev->driver_data; -} - -static inline void dev_set_drvdata(struct device *dev, void *data) -{ - dev->driver_data = data; -} - static inline unsigned int dev_get_uevent_suppress(const struct device *dev) { return dev->kobj.uevent_suppress; @@ -490,6 +480,8 @@ extern int device_rename(struct device *dev, char *new_name); extern int device_move(struct device *dev, struct device *new_parent, enum dpm_order dpm_order); extern const char *device_get_nodename(struct device *dev, const char **tmp); +extern void *dev_get_drvdata(const struct device *dev); +extern void dev_set_drvdata(struct device *dev, void *data); /* * Root device objects for grouping under /sys/devices -- cgit v1.2.3 From a5b8b1ada6dd76503884f5492b995cd29eefae0f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 17 Jul 2009 15:06:08 +0100 Subject: Driver core: Add accessor for device platform data For consistency with driver data provide a dev_get_platdata() accessor for reading the platform data from a device. Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman --- include/linux/device.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/device.h b/include/linux/device.h index c0bd23048be0..3f33f17f556c 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -494,6 +494,11 @@ static inline struct device *root_device_register(const char *name) } extern void root_device_unregister(struct device *root); +static inline void *dev_get_platdata(const struct device *dev) +{ + return dev->platform_data; +} + /* * Manual binding of a device to driver. See drivers/base/bus.c * for information on use. -- cgit v1.2.3 From a4dbd6740df0872cdf0a86841f75beec8381964d Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 24 Jun 2009 10:06:31 -0700 Subject: driver model: constify attribute groups Let attribute group vectors be declared "const". We'd like to let most attribute metadata live in read-only sections... this is a start. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- include/linux/attribute_container.h | 2 +- include/linux/device.h | 6 +++--- include/linux/netdevice.h | 2 +- include/linux/transport_class.h | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/attribute_container.h b/include/linux/attribute_container.h index 794ad74b1d61..c3ab81428c66 100644 --- a/include/linux/attribute_container.h +++ b/include/linux/attribute_container.h @@ -17,7 +17,7 @@ struct attribute_container { struct list_head node; struct klist containers; struct class *class; - struct attribute_group *grp; + const struct attribute_group *grp; struct device_attribute **attrs; int (*match)(struct attribute_container *, struct device *); #define ATTRIBUTE_CONTAINER_NO_CLASSDEVS 0x01 diff --git a/include/linux/device.h b/include/linux/device.h index 3f33f17f556c..e19e40a3dcbe 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -131,7 +131,7 @@ struct device_driver { void (*shutdown) (struct device *dev); int (*suspend) (struct device *dev, pm_message_t state); int (*resume) (struct device *dev); - struct attribute_group **groups; + const struct attribute_group **groups; const struct dev_pm_ops *pm; @@ -288,7 +288,7 @@ extern void class_destroy(struct class *cls); */ struct device_type { const char *name; - struct attribute_group **groups; + const struct attribute_group **groups; int (*uevent)(struct device *dev, struct kobj_uevent_env *env); char *(*nodename)(struct device *dev); void (*release)(struct device *dev); @@ -412,7 +412,7 @@ struct device { struct klist_node knode_class; struct class *class; - struct attribute_group **groups; /* optional groups */ + const struct attribute_group **groups; /* optional groups */ void (*release)(struct device *dev); }; diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 65ee1929b2b1..a9aa4b5917d7 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -895,7 +895,7 @@ struct net_device /* class/net/name entry */ struct device dev; /* space for optional statistics and wireless sysfs groups */ - struct attribute_group *sysfs_groups[3]; + const struct attribute_group *sysfs_groups[3]; /* rtnetlink link ops */ const struct rtnl_link_ops *rtnl_link_ops; diff --git a/include/linux/transport_class.h b/include/linux/transport_class.h index eaec1ea9558e..9ae8da3e6407 100644 --- a/include/linux/transport_class.h +++ b/include/linux/transport_class.h @@ -55,7 +55,7 @@ struct anon_transport_class cls = { \ struct transport_container { struct attribute_container ac; - struct attribute_group *statistics; + const struct attribute_group *statistics; }; #define attribute_container_to_transport_container(x) \ -- cgit v1.2.3 From ccb86a6907c9ba7b5be5f521362fc308e80bed34 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Mon, 20 Jul 2009 10:29:34 +0300 Subject: uio: add generic driver for PCI 2.3 devices This adds a generic uio driver that can bind to any PCI device. First user will be virtualization where a qemu userspace process needs to give guest OS access to the device. Interrupts are handled using the Interrupt Disable bit in the PCI command register and Interrupt Status bit in the PCI status register. All devices compliant to PCI 2.3 (circa 2002) and all compliant PCI Express devices should support these bits. Driver detects this support, and won't bind to devices which do not support the Interrupt Disable Bit in the command register. It's expected that more features of interest to virtualization will be added to this driver in the future. Possibilities are: mmap for device resources, MSI/MSI-X, eventfd (to interface with kvm), iommu. Signed-off-by: Michael S. Tsirkin Acked-by: Chris Wright Signed-off-by: Hans J. Koch Acked-by: Jesse Barnes Signed-off-by: Greg Kroah-Hartman --- include/linux/pci_regs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index fcaee42c7ac2..dd0bed4f1cf0 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -42,6 +42,7 @@ #define PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */ #define PCI_STATUS 0x06 /* 16 bits */ +#define PCI_STATUS_INTERRUPT 0x08 /* Interrupt status */ #define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */ #define PCI_STATUS_66MHZ 0x20 /* Support 66 Mhz PCI 2.1 bus */ #define PCI_STATUS_UDF 0x40 /* Support User Definable Features [obsolete] */ -- cgit v1.2.3 From 4622709445705c1e423d2addcfd8ccae052fe0ba Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 4 Aug 2009 12:55:34 +0200 Subject: Driver core: Add support for compatibility classes When turning class devices into bus devices, we may need to temporarily add links in sysfs so that user-space applications are not confused. This is done by adding the following API: * Functions to register and unregister compatibility classes. These appear in sysfs at the same location as regular classes, but instead of class devices, they contain links to bus devices. * Functions to create and delete such links. Additionally, the caller can optionally pass a target device to which a "device" link should point (typically that would be the device's parent), to fully emulate the original class device. The i2c subsystem will be the first user of this API, as i2c adapters are being converted from class devices to bus devices. Signed-off-by: Jean Delvare Signed-off-by: Kay Sievers --- include/linux/device.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/device.h b/include/linux/device.h index e19e40a3dcbe..62ff53a67931 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -225,6 +225,14 @@ extern void class_unregister(struct class *class); __class_register(class, &__key); \ }) +struct class_compat; +struct class_compat *class_compat_register(const char *name); +void class_compat_unregister(struct class_compat *cls); +int class_compat_create_link(struct class_compat *cls, struct device *dev, + struct device *device_link); +void class_compat_remove_link(struct class_compat *cls, struct device *dev, + struct device *device_link); + extern void class_dev_iter_init(struct class_dev_iter *iter, struct class *class, struct device *start, -- cgit v1.2.3 From 2b2af54a5bb6f7e80ccf78f20084b93c398c3a8b Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Thu, 30 Apr 2009 15:23:42 +0200 Subject: Driver Core: devtmpfs - kernel-maintained tmpfs-based /dev Devtmpfs lets the kernel create a tmpfs instance called devtmpfs very early at kernel initialization, before any driver-core device is registered. Every device with a major/minor will provide a device node in devtmpfs. Devtmpfs can be changed and altered by userspace at any time, and in any way needed - just like today's udev-mounted tmpfs. Unmodified udev versions will run just fine on top of it, and will recognize an already existing kernel-created device node and use it. The default node permissions are root:root 0600. Proper permissions and user/group ownership, meaningful symlinks, all other policy still needs to be applied by userspace. If a node is created by devtmps, devtmpfs will remove the device node when the device goes away. If the device node was created by userspace, or the devtmpfs created node was replaced by userspace, it will no longer be removed by devtmpfs. If it is requested to auto-mount it, it makes init=/bin/sh work without any further userspace support. /dev will be fully populated and dynamic, and always reflect the current device state of the kernel. With the commonly used dynamic device numbers, it solves the problem where static devices nodes may point to the wrong devices. It is intended to make the initial bootup logic simpler and more robust, by de-coupling the creation of the inital environment, to reliably run userspace processes, from a complex userspace bootstrap logic to provide a working /dev. Signed-off-by: Kay Sievers Signed-off-by: Jan Blunck Tested-By: Harald Hoyer Tested-By: Scott James Remnant Signed-off-by: Greg Kroah-Hartman --- include/linux/device.h | 10 ++++++++++ include/linux/shmem_fs.h | 3 +++ 2 files changed, 13 insertions(+) (limited to 'include/linux') diff --git a/include/linux/device.h b/include/linux/device.h index 62ff53a67931..847b763e40e9 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -552,6 +552,16 @@ extern void put_device(struct device *dev); extern void wait_for_device_probe(void); +#ifdef CONFIG_DEVTMPFS +extern int devtmpfs_create_node(struct device *dev); +extern int devtmpfs_delete_node(struct device *dev); +extern int devtmpfs_mount(const char *mountpoint); +#else +static inline int devtmpfs_create_node(struct device *dev) { return 0; } +static inline int devtmpfs_delete_node(struct device *dev) { return 0; } +static inline int devtmpfs_mount(const char *mountpoint) { return 0; } +#endif + /* drivers/base/power/shutdown.c */ extern void device_shutdown(void); diff --git a/include/linux/shmem_fs.h b/include/linux/shmem_fs.h index 6d3f2f449ead..deee7afd8d66 100644 --- a/include/linux/shmem_fs.h +++ b/include/linux/shmem_fs.h @@ -38,6 +38,9 @@ static inline struct shmem_inode_info *SHMEM_I(struct inode *inode) return container_of(inode, struct shmem_inode_info, vfs_inode); } +extern int init_tmpfs(void); +extern int shmem_fill_super(struct super_block *sb, void *data, int silent); + #ifdef CONFIG_TMPFS_POSIX_ACL int shmem_check_acl(struct inode *, int); int shmem_acl_init(struct inode *, struct inode *); -- cgit v1.2.3 From 5d351754fcf58d1a604aa7cf95c2805e8a098ad9 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 15 Sep 2009 13:32:13 -0400 Subject: SUNRPC: Defer the auth_gss upcall when the RPC call is asynchronous Otherwise, the upcall is going to be synchronous, which may not be what the caller wants... Signed-off-by: Trond Myklebust Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/auth.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/auth.h b/include/linux/sunrpc/auth.h index 3f632182d8eb..996df4dac7d4 100644 --- a/include/linux/sunrpc/auth.h +++ b/include/linux/sunrpc/auth.h @@ -111,7 +111,7 @@ struct rpc_credops { void (*crdestroy)(struct rpc_cred *); int (*crmatch)(struct auth_cred *, struct rpc_cred *, int); - void (*crbind)(struct rpc_task *, struct rpc_cred *); + void (*crbind)(struct rpc_task *, struct rpc_cred *, int); __be32 * (*crmarshal)(struct rpc_task *, __be32 *); int (*crrefresh)(struct rpc_task *); __be32 * (*crvalidate)(struct rpc_task *, __be32 *); @@ -140,7 +140,7 @@ struct rpc_cred * rpcauth_lookup_credcache(struct rpc_auth *, struct auth_cred * void rpcauth_init_cred(struct rpc_cred *, const struct auth_cred *, struct rpc_auth *, const struct rpc_credops *); struct rpc_cred * rpcauth_lookupcred(struct rpc_auth *, int); void rpcauth_bindcred(struct rpc_task *, struct rpc_cred *, int); -void rpcauth_generic_bind_cred(struct rpc_task *, struct rpc_cred *); +void rpcauth_generic_bind_cred(struct rpc_task *, struct rpc_cred *, int); void put_rpccred(struct rpc_cred *); void rpcauth_unbindcred(struct rpc_task *); __be32 * rpcauth_marshcred(struct rpc_task *, __be32 *); -- cgit v1.2.3 From 29ab23cc5d351658d01a4327d55e9106a73fd04f Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Tue, 15 Sep 2009 15:56:50 -0400 Subject: nfsd4: allow nfs4 state startup to fail The failure here is pretty unlikely, but we should handle it anyway. Signed-off-by: J. Bruce Fields --- include/linux/nfsd/nfsd.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nfsd/nfsd.h b/include/linux/nfsd/nfsd.h index 2812ed52669d..24fdf89cea83 100644 --- a/include/linux/nfsd/nfsd.h +++ b/include/linux/nfsd/nfsd.h @@ -166,7 +166,7 @@ extern int nfsd_max_blksize; extern unsigned int max_delegations; int nfs4_state_init(void); void nfsd4_free_slabs(void); -void nfs4_state_start(void); +int nfs4_state_start(void); void nfs4_state_shutdown(void); time_t nfs4_lease_time(void); void nfs4_reset_lease(time_t leasetime); @@ -174,7 +174,7 @@ int nfs4_reset_recoverydir(char *recdir); #else static inline int nfs4_state_init(void) { return 0; } static inline void nfsd4_free_slabs(void) { } -static inline void nfs4_state_start(void) { } +static inline int nfs4_state_start(void) { } static inline void nfs4_state_shutdown(void) { } static inline time_t nfs4_lease_time(void) { return 0; } static inline void nfs4_reset_lease(time_t leasetime) { } -- cgit v1.2.3 From 80fc015bdfe1f5b870c1e1ee02d78e709523fee7 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Tue, 15 Sep 2009 18:07:35 -0400 Subject: nfsd4: use common rpc_cred for all callbacks Callbacks are always made using the machine's identity, so we can use a single auth_generic credential shared among callbacks to all clients and let the rpc code take care of the rest. Signed-off-by: J. Bruce Fields --- include/linux/nfsd/state.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/nfsd/state.h b/include/linux/nfsd/state.h index 70ef5f4abbbc..9bf3aa8c5aea 100644 --- a/include/linux/nfsd/state.h +++ b/include/linux/nfsd/state.h @@ -89,7 +89,6 @@ struct nfs4_cb_conn { /* RPC client info */ atomic_t cb_set; /* successful CB_NULL call */ struct rpc_clnt * cb_client; - struct rpc_cred * cb_cred; }; /* Maximum number of slots per session. 160 is useful for long haul TCP */ @@ -362,6 +361,7 @@ extern int nfs4_in_grace(void); extern __be32 nfs4_check_open_reclaim(clientid_t *clid); extern void put_nfs4_client(struct nfs4_client *clp); extern void nfs4_free_stateowner(struct kref *kref); +extern int set_callback_cred(void); extern void nfsd4_probe_callback(struct nfs4_client *clp); extern void nfsd4_cb_recall(struct nfs4_delegation *dp); extern void nfs4_put_delegation(struct nfs4_delegation *dp); -- cgit v1.2.3 From 38524ab38f2752beee262a97403d871665838172 Mon Sep 17 00:00:00 2001 From: Andy Adamson Date: Thu, 10 Sep 2009 12:25:59 +0300 Subject: nfsd41: Backchannel: callback infrastructure Keep the xprt used for create_session in cl_cb_xprt. Mark cl_callback.cb_minorversion = 1 and remember the client provided cl_callback.cb_prog rpc program number. Use it to probe the callback path. Use the client's network address to initialize as the callback's address as expected by the xprt creation routines. Define xdr sizes and code nfs4_cb_compound header to be able to send a null callback rpc. Signed-off-by: Andy Adamson Signed-off-by: Benny Halevy Signed-off-by: Ricardo Labiaga [get callback minorversion from fore channel's] Signed-off-by: Benny Halevy [nfsd41: change bc_sock to bc_xprt] Signed-off-by: Benny Halevy [pulled definition for cl_cb_xprt] Signed-off-by: Benny Halevy [nfsd41: set up backchannel's cb_addr] [moved rpc_create_args init to "nfsd: modify nfsd4.1 backchannel to use new xprt class"] Signed-off-by: Benny Halevy Signed-off-by: J. Bruce Fields --- include/linux/nfsd/state.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nfsd/state.h b/include/linux/nfsd/state.h index 9bf3aa8c5aea..c916032570c4 100644 --- a/include/linux/nfsd/state.h +++ b/include/linux/nfsd/state.h @@ -211,6 +211,9 @@ struct nfs4_client { struct nfsd4_clid_slot cl_cs_slot; /* create_session slot */ u32 cl_exchange_flags; struct nfs4_sessionid cl_sessionid; + + /* for nfs41 callbacks */ + struct svc_xprt *cl_cb_xprt; /* 4.1 callback transport */ }; /* struct nfs4_client_reset -- cgit v1.2.3 From 132f97715c098393fb8de3c26b07b9fdbd2334f1 Mon Sep 17 00:00:00 2001 From: Ricardo Labiaga Date: Thu, 10 Sep 2009 12:26:12 +0300 Subject: nfsd41: Backchannel: Add sequence arguments to callback RPC arguments Follow the model we use in the client. Make the sequence arguments part of the regular RPC arguments. None of the callbacks that are soon to be implemented expect results that need to be passed back to the caller, so we don't define a separate RPC results structure. For session validation, the cb_sequence decoding will use a pointer to the sequence arguments that are part of the RPC argument. Signed-off-by: Ricardo Labiaga [define struct nfsd4_cb_sequence here] Signed-off-by: Benny Halevy Signed-off-by: J. Bruce Fields --- include/linux/nfsd/state.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nfsd/state.h b/include/linux/nfsd/state.h index c916032570c4..0e5b5aecde03 100644 --- a/include/linux/nfsd/state.h +++ b/include/linux/nfsd/state.h @@ -60,6 +60,12 @@ typedef struct { #define si_stateownerid si_opaque.so_stateownerid #define si_fileid si_opaque.so_fileid +struct nfsd4_cb_sequence { + /* args/res */ + u32 cbs_minorversion; + struct nfs4_client *cbs_clp; +}; + struct nfs4_delegation { struct list_head dl_perfile; struct list_head dl_perclnt; -- cgit v1.2.3 From 199ff35e1c8724871e157c2e48556c2794946e82 Mon Sep 17 00:00:00 2001 From: Ricardo Labiaga Date: Thu, 10 Sep 2009 12:26:25 +0300 Subject: nfsd41: Backchannel: Server backchannel RPC wait queue RPC callback requests will wait on this wait queue if the backchannel is out of slots. Signed-off-by: Ricardo Labiaga Signed-off-by: Benny Halevy Signed-off-by: J. Bruce Fields --- include/linux/nfsd/state.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nfsd/state.h b/include/linux/nfsd/state.h index 0e5b5aecde03..9cc40a137c34 100644 --- a/include/linux/nfsd/state.h +++ b/include/linux/nfsd/state.h @@ -219,7 +219,11 @@ struct nfs4_client { struct nfs4_sessionid cl_sessionid; /* for nfs41 callbacks */ + /* We currently support a single back channel with a single slot */ + unsigned long cl_cb_slot_busy; struct svc_xprt *cl_cb_xprt; /* 4.1 callback transport */ + struct rpc_wait_queue cl_cb_waitq; /* backchannel callers may */ + /* wait here for slots */ }; /* struct nfs4_client_reset -- cgit v1.2.3 From 2a1d1b593803d7c18a369bf148f3b48c5a3260fc Mon Sep 17 00:00:00 2001 From: Ricardo Labiaga Date: Thu, 10 Sep 2009 12:26:38 +0300 Subject: nfsd41: Backchannel: Setup sequence information Follows the model used by the NFS client. Setup the RPC prepare and done function pointers so that we can populate the sequence information if minorversion == 1. rpc_run_task() is then invoked directly just like existing NFS client operations do. nfsd4_cb_prepare() determines if the sequence information needs to be setup. If the slot is in use, it adds itself to the wait queue. nfsd4_cb_done() wakes anyone sleeping on the callback channel wait queue after our RPC reply has been received. It also sets the task message result pointer to NULL to clearly indicate we're done using it. Signed-off-by: Ricardo Labiaga [define and initialize cl_cb_seq_nr here] [pulled out unused defintion of nfsd4_cb_done] Signed-off-by: Benny Halevy Signed-off-by: J. Bruce Fields --- include/linux/nfsd/state.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/nfsd/state.h b/include/linux/nfsd/state.h index 9cc40a137c34..b38d11324189 100644 --- a/include/linux/nfsd/state.h +++ b/include/linux/nfsd/state.h @@ -221,6 +221,7 @@ struct nfs4_client { /* for nfs41 callbacks */ /* We currently support a single back channel with a single slot */ unsigned long cl_cb_slot_busy; + u32 cl_cb_seq_nr; struct svc_xprt *cl_cb_xprt; /* 4.1 callback transport */ struct rpc_wait_queue cl_cb_waitq; /* backchannel callers may */ /* wait here for slots */ -- cgit v1.2.3 From fe832a3a48737b24f95fab202b1c67fb588b071d Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Tue, 15 Sep 2009 23:51:31 -0400 Subject: tracing: remove notrace from __kprobes annotation When ftrace had issues with NMIs, it was needed to annotate all the areas that kprobes had issues with notrace. Now that ftrace is NMI safe, the functions that limit ftrace from tracing are just a small few. Kprobes is too big of a set for ftrace not to trace. Remove the coupling. Signed-off-by: Steven Rostedt --- include/linux/kprobes.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h index bcd9c07848be..3a46b7b7abb2 100644 --- a/include/linux/kprobes.h +++ b/include/linux/kprobes.h @@ -48,13 +48,13 @@ #define KPROBE_HIT_SSDONE 0x00000008 /* Attach to insert probes on any functions which should be ignored*/ -#define __kprobes __attribute__((__section__(".kprobes.text"))) notrace +#define __kprobes __attribute__((__section__(".kprobes.text"))) #else /* CONFIG_KPROBES */ typedef int kprobe_opcode_t; struct arch_specific_insn { int dummy; }; -#define __kprobes notrace +#define __kprobes #endif /* CONFIG_KPROBES */ struct kprobe; -- cgit v1.2.3 From 59abf02644c45f1591e1374ee7bb45dc757fcb88 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 16 Sep 2009 08:28:30 +0200 Subject: sched: Add SD_PREFER_LOCAL And turn it on for NUMA and MC domains. This improves locality in balancing decisions by keeping up to capacity amount of tasks local before looking for idle CPUs. (and twice the capacity if SD_POWERSAVINGS_BALANCE is set.) Signed-off-by: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- include/linux/sched.h | 2 +- include/linux/topology.h | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index ee1f88993097..b4a39bb2b4a4 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -805,7 +805,7 @@ enum cpu_idle_type { #define SD_BALANCE_FORK 0x0008 /* Balance on fork, clone */ #define SD_BALANCE_WAKE 0x0010 /* Balance on wakeup */ #define SD_WAKE_AFFINE 0x0020 /* Wake task to waking CPU */ - +#define SD_PREFER_LOCAL 0x0040 /* Prefer to keep tasks local to this domain */ #define SD_SHARE_CPUPOWER 0x0080 /* Domain members share cpu power */ #define SD_POWERSAVINGS_BALANCE 0x0100 /* Balance for power savings */ #define SD_SHARE_PKG_RESOURCES 0x0200 /* Domain members share cpu pkg resources */ diff --git a/include/linux/topology.h b/include/linux/topology.h index 936ab2b37683..a6614b0242a9 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -129,6 +129,7 @@ int arch_update_cpu_topology(void); | 1*SD_BALANCE_FORK \ | 1*SD_BALANCE_WAKE \ | 1*SD_WAKE_AFFINE \ + | 1*SD_PREFER_LOCAL \ | 0*SD_SHARE_CPUPOWER \ | 1*SD_SHARE_PKG_RESOURCES \ | 0*SD_SERIALIZE \ @@ -161,6 +162,7 @@ int arch_update_cpu_topology(void); | 1*SD_BALANCE_FORK \ | 1*SD_BALANCE_WAKE \ | 1*SD_WAKE_AFFINE \ + | 1*SD_PREFER_LOCAL \ | 0*SD_SHARE_CPUPOWER \ | 0*SD_SHARE_PKG_RESOURCES \ | 0*SD_SERIALIZE \ -- cgit v1.2.3 From d466f2fcb32cd97fd586bfa33f5dba3ac78aadb0 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Wed, 16 Sep 2009 11:50:03 +0200 Subject: HWPOISON: Add page flag for poisoned pages Hardware poisoned pages need special handling in the VM and shouldn't be touched again. This requires a new page flag. Define it here. The page flags wars seem to be over, so it shouldn't be a problem to get a new one. v2: Add TestSetHWPoison (suggested by Johannes Weiner) Acked-by: Christoph Lameter Signed-off-by: Andi Kleen --- include/linux/page-flags.h | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h index 2b87acfc5f87..9bc5fd9fdbf6 100644 --- a/include/linux/page-flags.h +++ b/include/linux/page-flags.h @@ -51,6 +51,9 @@ * PG_buddy is set to indicate that the page is free and in the buddy system * (see mm/page_alloc.c). * + * PG_hwpoison indicates that a page got corrupted in hardware and contains + * data with incorrect ECC bits that triggered a machine check. Accessing is + * not safe since it may cause another machine check. Don't touch! */ /* @@ -101,6 +104,9 @@ enum pageflags { #endif #ifdef CONFIG_ARCH_USES_PG_UNCACHED PG_uncached, /* Page has been mapped as uncached */ +#endif +#ifdef CONFIG_MEMORY_FAILURE + PG_hwpoison, /* hardware poisoned page. Don't touch */ #endif __NR_PAGEFLAGS, @@ -263,6 +269,15 @@ PAGEFLAG(Uncached, uncached) PAGEFLAG_FALSE(Uncached) #endif +#ifdef CONFIG_MEMORY_FAILURE +PAGEFLAG(HWPoison, hwpoison) +TESTSETFLAG(HWPoison, hwpoison) +#define __PG_HWPOISON (1UL << PG_hwpoison) +#else +PAGEFLAG_FALSE(HWPoison) +#define __PG_HWPOISON 0 +#endif + static inline int PageUptodate(struct page *page) { int ret = test_bit(PG_uptodate, &(page)->flags); @@ -387,7 +402,7 @@ static inline void __ClearPageTail(struct page *page) 1 << PG_private | 1 << PG_private_2 | \ 1 << PG_buddy | 1 << PG_writeback | 1 << PG_reserved | \ 1 << PG_slab | 1 << PG_swapcache | 1 << PG_active | \ - 1 << PG_unevictable | __PG_MLOCKED) + 1 << PG_unevictable | __PG_MLOCKED | __PG_HWPOISON) /* * Flags checked when a page is prepped for return by the page allocator. -- cgit v1.2.3 From 10be22dfe1e6ad978269dc275147e0ed049187bb Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Wed, 16 Sep 2009 11:50:04 +0200 Subject: HWPOISON: Export some rmap vma locking to outside world Needed for later patch that walks rmap entries on its own. This used to be very frowned upon, but memory-failure.c does some rather specialized rmap walking and rmap has been stable for quite some time, so I think it's ok now to export it. Signed-off-by: Andi Kleen --- include/linux/rmap.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/rmap.h b/include/linux/rmap.h index bf116d0dbf23..8dff2ffab82c 100644 --- a/include/linux/rmap.h +++ b/include/linux/rmap.h @@ -112,6 +112,12 @@ int page_mkclean(struct page *); */ int try_to_munlock(struct page *); +/* + * Called by memory-failure.c to kill processes. + */ +struct anon_vma *page_lock_anon_vma(struct page *page); +void page_unlock_anon_vma(struct anon_vma *anon_vma); + #else /* !CONFIG_MMU */ #define anon_vma_init() do {} while (0) -- cgit v1.2.3 From a7420aa54dbf699a5a05feba3c859b6baaa3938c Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Wed, 16 Sep 2009 11:50:05 +0200 Subject: HWPOISON: Add support for poison swap entries v2 Memory migration uses special swap entry types to trigger special actions on page faults. Extend this mechanism to also support poisoned swap entries, to trigger poison handling on page faults. This allows follow-on patches to prevent processes from faulting in poisoned pages again. v2: Fix overflow in MAX_SWAPFILES (Fengguang Wu) v3: Better overflow fix (Hidehiro Kawai) Signed-off-by: Andi Kleen --- include/linux/swap.h | 34 ++++++++++++++++++++++++++++------ include/linux/swapops.h | 38 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 66 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/swap.h b/include/linux/swap.h index 7c15334f3ff2..f077e454c659 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -34,15 +34,37 @@ static inline int current_is_kswapd(void) * the type/offset into the pte as 5/27 as well. */ #define MAX_SWAPFILES_SHIFT 5 -#ifndef CONFIG_MIGRATION -#define MAX_SWAPFILES (1 << MAX_SWAPFILES_SHIFT) + +/* + * Use some of the swap files numbers for other purposes. This + * is a convenient way to hook into the VM to trigger special + * actions on faults. + */ + +/* + * NUMA node memory migration support + */ +#ifdef CONFIG_MIGRATION +#define SWP_MIGRATION_NUM 2 +#define SWP_MIGRATION_READ (MAX_SWAPFILES + SWP_HWPOISON_NUM) +#define SWP_MIGRATION_WRITE (MAX_SWAPFILES + SWP_HWPOISON_NUM + 1) #else -/* Use last two entries for page migration swap entries */ -#define MAX_SWAPFILES ((1 << MAX_SWAPFILES_SHIFT)-2) -#define SWP_MIGRATION_READ MAX_SWAPFILES -#define SWP_MIGRATION_WRITE (MAX_SWAPFILES + 1) +#define SWP_MIGRATION_NUM 0 #endif +/* + * Handling of hardware poisoned pages with memory corruption. + */ +#ifdef CONFIG_MEMORY_FAILURE +#define SWP_HWPOISON_NUM 1 +#define SWP_HWPOISON MAX_SWAPFILES +#else +#define SWP_HWPOISON_NUM 0 +#endif + +#define MAX_SWAPFILES \ + ((1 << MAX_SWAPFILES_SHIFT) - SWP_MIGRATION_NUM - SWP_HWPOISON_NUM) + /* * Magic header for a swap area. The first part of the union is * what the swap magic looks like for the old (limited to 128MB) diff --git a/include/linux/swapops.h b/include/linux/swapops.h index 6ec39ab27b4b..cd42e30b7c6e 100644 --- a/include/linux/swapops.h +++ b/include/linux/swapops.h @@ -131,3 +131,41 @@ static inline int is_write_migration_entry(swp_entry_t entry) #endif +#ifdef CONFIG_MEMORY_FAILURE +/* + * Support for hardware poisoned pages + */ +static inline swp_entry_t make_hwpoison_entry(struct page *page) +{ + BUG_ON(!PageLocked(page)); + return swp_entry(SWP_HWPOISON, page_to_pfn(page)); +} + +static inline int is_hwpoison_entry(swp_entry_t entry) +{ + return swp_type(entry) == SWP_HWPOISON; +} +#else + +static inline swp_entry_t make_hwpoison_entry(struct page *page) +{ + return swp_entry(0, 0); +} + +static inline int is_hwpoison_entry(swp_entry_t swp) +{ + return 0; +} +#endif + +#if defined(CONFIG_MEMORY_FAILURE) || defined(CONFIG_MIGRATION) +static inline int non_swap_entry(swp_entry_t entry) +{ + return swp_type(entry) >= MAX_SWAPFILES; +} +#else +static inline int non_swap_entry(swp_entry_t entry) +{ + return 0; +} +#endif -- cgit v1.2.3 From d1737fdbec7f90edc52dd0c5c3767457f28e78d8 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Wed, 16 Sep 2009 11:50:06 +0200 Subject: HWPOISON: Add basic support for poisoned pages in fault handler v3 - Add a new VM_FAULT_HWPOISON error code to handle_mm_fault. Right now architectures have to explicitely enable poison page support, so this is forward compatible to all architectures. They only need to add it when they enable poison page support. - Add poison page handling in swap in fault code v2: Add missing delayacct_clear_flag (Hidehiro Kawai) v3: Really use delayacct_clear_flag (Hidehiro Kawai) Signed-off-by: Andi Kleen --- include/linux/mm.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index 9a72cc78e6b8..082b68cb5ffe 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -685,11 +685,12 @@ static inline int page_mapped(struct page *page) #define VM_FAULT_SIGBUS 0x0002 #define VM_FAULT_MAJOR 0x0004 #define VM_FAULT_WRITE 0x0008 /* Special case for get_user_pages */ +#define VM_FAULT_HWPOISON 0x0010 /* Hit poisoned page */ #define VM_FAULT_NOPAGE 0x0100 /* ->fault installed the pte, not return page */ #define VM_FAULT_LOCKED 0x0200 /* ->fault locked the returned page */ -#define VM_FAULT_ERROR (VM_FAULT_OOM | VM_FAULT_SIGBUS) +#define VM_FAULT_ERROR (VM_FAULT_OOM | VM_FAULT_SIGBUS | VM_FAULT_HWPOISON) /* * Can be called by the pagefault handler when it gets a VM_FAULT_OOM. -- cgit v1.2.3 From 14fa31b89c5ae79e4131da41761378a6df674352 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Wed, 16 Sep 2009 11:50:10 +0200 Subject: HWPOISON: Use bitmask/action code for try_to_unmap behaviour try_to_unmap currently has multiple modi (migration, munlock, normal unmap) which are selected by magic flag variables. The logic is not very straight forward, because each of these flag change multiple behaviours (e.g. migration turns off aging, not only sets up migration ptes etc.) Also the different flags interact in magic ways. A later patch in this series adds another mode to try_to_unmap, so this becomes quickly unmanageable. Replace the different flags with a action code (migration, munlock, munmap) and some additional flags as modifiers (ignore mlock, ignore aging). This makes the logic more straight forward and allows easier extension to new behaviours. Change all the caller to declare what they want to do. This patch is supposed to be a nop in behaviour. If anyone can prove it is not that would be a bug. Cc: Lee.Schermerhorn@hp.com Cc: npiggin@suse.de Signed-off-by: Andi Kleen --- include/linux/rmap.h | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/rmap.h b/include/linux/rmap.h index 8dff2ffab82c..4c4a2d4d289e 100644 --- a/include/linux/rmap.h +++ b/include/linux/rmap.h @@ -85,7 +85,18 @@ static inline void page_dup_rmap(struct page *page, struct vm_area_struct *vma, */ int page_referenced(struct page *, int is_locked, struct mem_cgroup *cnt, unsigned long *vm_flags); -int try_to_unmap(struct page *, int ignore_refs); +enum ttu_flags { + TTU_UNMAP = 0, /* unmap mode */ + TTU_MIGRATION = 1, /* migration mode */ + TTU_MUNLOCK = 2, /* munlock mode */ + TTU_ACTION_MASK = 0xff, + + TTU_IGNORE_MLOCK = (1 << 8), /* ignore mlock */ + TTU_IGNORE_ACCESS = (1 << 9), /* don't age */ +}; +#define TTU_ACTION(x) ((x) & TTU_ACTION_MASK) + +int try_to_unmap(struct page *, enum ttu_flags flags); /* * Called from mm/filemap_xip.c to unmap empty zero page -- cgit v1.2.3 From 888b9f7c58ebe8303bad817cd554df887a683957 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Wed, 16 Sep 2009 11:50:11 +0200 Subject: HWPOISON: Handle hardware poisoned pages in try_to_unmap When a page has the poison bit set replace the PTE with a poison entry. This causes the right error handling to be done later when a process runs into it. v2: add a new flag to not do that (needed for the memory-failure handler later) (Fengguang) v3: remove unnecessary is_migration_entry() test (Fengguang, Minchan) Reviewed-by: Minchan Kim Reviewed-by: Wu Fengguang Signed-off-by: Andi Kleen --- include/linux/rmap.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/rmap.h b/include/linux/rmap.h index 4c4a2d4d289e..ce989f1fc2ed 100644 --- a/include/linux/rmap.h +++ b/include/linux/rmap.h @@ -93,6 +93,7 @@ enum ttu_flags { TTU_IGNORE_MLOCK = (1 << 8), /* ignore mlock */ TTU_IGNORE_ACCESS = (1 << 9), /* don't age */ + TTU_IGNORE_HWPOISON = (1 << 10),/* corrupted page is recoverable */ }; #define TTU_ACTION(x) ((x) & TTU_ACTION_MASK) -- cgit v1.2.3 From 750b4987b0cd4d408e54cb83a80a067cbe690feb Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Wed, 16 Sep 2009 11:50:12 +0200 Subject: HWPOISON: Refactor truncate to allow direct truncating of page v2 Extract out truncate_inode_page() out of the truncate path so that it can be used by memory-failure.c [AK: description, headers, fix typos] v2: Some white space changes from Fengguang Wu Signed-off-by: Andi Kleen --- include/linux/mm.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index 082b68cb5ffe..8cbc0aafd5bd 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -794,6 +794,8 @@ static inline void unmap_shared_mapping_range(struct address_space *mapping, extern int vmtruncate(struct inode * inode, loff_t offset); extern int vmtruncate_range(struct inode * inode, loff_t offset, loff_t end); +int truncate_inode_page(struct address_space *mapping, struct page *page); + #ifdef CONFIG_MMU extern int handle_mm_fault(struct mm_struct *mm, struct vm_area_struct *vma, unsigned long address, unsigned int flags); -- cgit v1.2.3 From 83f786680aec8d030184f7ced1a0a3dd8ac81764 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Wed, 16 Sep 2009 11:50:13 +0200 Subject: HWPOISON: Add invalidate_inode_page Add a simple way to invalidate a single page This is just a refactoring of the truncate.c code. Originally from Fengguang, modified by Andi Kleen. Signed-off-by: Andi Kleen --- include/linux/mm.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index 8cbc0aafd5bd..b05bbde0296d 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -796,6 +796,8 @@ extern int vmtruncate_range(struct inode * inode, loff_t offset, loff_t end); int truncate_inode_page(struct address_space *mapping, struct page *page); +int invalidate_inode_page(struct page *page); + #ifdef CONFIG_MMU extern int handle_mm_fault(struct mm_struct *mm, struct vm_area_struct *vma, unsigned long address, unsigned int flags); -- cgit v1.2.3 From 257187362123f15d9d1e09918cf87cebbea4e786 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Wed, 16 Sep 2009 11:50:13 +0200 Subject: HWPOISON: Define a new error_remove_page address space op for async truncation Truncating metadata pages is not safe right now before we haven't audited all file systems. To enable truncation only for data address space define a new address_space callback error_remove_page. This is used for memory_failure.c memory error handling. This can be then set to truncate_inode_page() This patch just defines the new operation and adds documentation. Callers and users come in followon patches. Signed-off-by: Andi Kleen --- include/linux/fs.h | 1 + include/linux/mm.h | 1 + 2 files changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index b21cf6b9c80b..4f47afd37647 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -595,6 +595,7 @@ struct address_space_operations { int (*launder_page) (struct page *); int (*is_partially_uptodate) (struct page *, read_descriptor_t *, unsigned long); + int (*error_remove_page)(struct address_space *, struct page *); }; /* diff --git a/include/linux/mm.h b/include/linux/mm.h index b05bbde0296d..a16018f7d61c 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -795,6 +795,7 @@ extern int vmtruncate(struct inode * inode, loff_t offset); extern int vmtruncate_range(struct inode * inode, loff_t offset, loff_t end); int truncate_inode_page(struct address_space *mapping, struct page *page); +int generic_error_remove_page(struct address_space *mapping, struct page *page); int invalidate_inode_page(struct page *page); -- cgit v1.2.3 From 4db96cf077aa938b11fe7ac79ecc9b29ec00fbab Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Wed, 16 Sep 2009 11:50:14 +0200 Subject: HWPOISON: Add PR_MCE_KILL prctl to control early kill behaviour per process This allows processes to override their early/late kill behaviour on hardware memory errors. Typically applications which are memory error aware is better of with early kill (see the error as soon as possible), all others with late kill (only see the error when the error is really impacting execution) There's a global sysctl, but this way an application can set its specific policy. We're using two bits, one to signify that the process stated its intention and that I also made the prctl future proof by enforcing the unused arguments are 0. The state is inherited to children. Note this makes us officially run out of process flags on 32bit, but the next patch can easily add another field. Manpage patch will be supplied separately. Signed-off-by: Andi Kleen --- include/linux/prctl.h | 2 ++ include/linux/sched.h | 2 ++ 2 files changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/prctl.h b/include/linux/prctl.h index b00df4c79c63..3dc303197e67 100644 --- a/include/linux/prctl.h +++ b/include/linux/prctl.h @@ -88,4 +88,6 @@ #define PR_TASK_PERF_COUNTERS_DISABLE 31 #define PR_TASK_PERF_COUNTERS_ENABLE 32 +#define PR_MCE_KILL 33 + #endif /* _LINUX_PRCTL_H */ diff --git a/include/linux/sched.h b/include/linux/sched.h index f3d74bd04d18..29eae73c951d 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1687,6 +1687,7 @@ extern cputime_t task_gtime(struct task_struct *p); #define PF_EXITPIDONE 0x00000008 /* pi exit done on shut down */ #define PF_VCPU 0x00000010 /* I'm a virtual CPU */ #define PF_FORKNOEXEC 0x00000040 /* forked but didn't exec */ +#define PF_MCE_PROCESS 0x00000080 /* process policy on mce errors */ #define PF_SUPERPRIV 0x00000100 /* used super-user privileges */ #define PF_DUMPCORE 0x00000200 /* dumped core */ #define PF_SIGNALED 0x00000400 /* killed by a signal */ @@ -1706,6 +1707,7 @@ extern cputime_t task_gtime(struct task_struct *p); #define PF_SPREAD_PAGE 0x01000000 /* Spread page cache over cpuset */ #define PF_SPREAD_SLAB 0x02000000 /* Spread some slab caches over cpuset */ #define PF_THREAD_BOUND 0x04000000 /* Thread bound to specific cpu */ +#define PF_MCE_EARLY 0x08000000 /* Early kill for mce process policy */ #define PF_MEMPOLICY 0x10000000 /* Non-default NUMA mempolicy */ #define PF_MUTEX_TESTER 0x20000000 /* Thread belongs to the rt mutex tester */ #define PF_FREEZER_SKIP 0x40000000 /* Freezer should not count it as freezeable */ -- cgit v1.2.3 From 6a46079cf57a7f7758e8b926980a4f852f89b34d Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Wed, 16 Sep 2009 11:50:15 +0200 Subject: HWPOISON: The high level memory error handler in the VM v7 Add the high level memory handler that poisons pages that got corrupted by hardware (typically by a two bit flip in a DIMM or a cache) on the Linux level. The goal is to prevent everyone from accessing these pages in the future. This done at the VM level by marking a page hwpoisoned and doing the appropriate action based on the type of page it is. The code that does this is portable and lives in mm/memory-failure.c To quote the overview comment: High level machine check handler. Handles pages reported by the hardware as being corrupted usually due to a 2bit ECC memory or cache failure. This focuses on pages detected as corrupted in the background. When the current CPU tries to consume corruption the currently running process can just be killed directly instead. This implies that if the error cannot be handled for some reason it's safe to just ignore it because no corruption has been consumed yet. Instead when that happens another machine check will happen. Handles page cache pages in various states. The tricky part here is that we can access any page asynchronous to other VM users, because memory failures could happen anytime and anywhere, possibly violating some of their assumptions. This is why this code has to be extremely careful. Generally it tries to use normal locking rules, as in get the standard locks, even if that means the error handling takes potentially a long time. Some of the operations here are somewhat inefficient and have non linear algorithmic complexity, because the data structures have not been optimized for this case. This is in particular the case for the mapping from a vma to a process. Since this case is expected to be rare we hope we can get away with this. There are in principle two strategies to kill processes on poison: - just unmap the data and wait for an actual reference before killing - kill as soon as corruption is detected. Both have advantages and disadvantages and should be used in different situations. Right now both are implemented and can be switched with a new sysctl vm.memory_failure_early_kill The default is early kill. The patch does some rmap data structure walking on its own to collect processes to kill. This is unusual because normally all rmap data structure knowledge is in rmap.c only. I put it here for now to keep everything together and rmap knowledge has been seeping out anyways Includes contributions from Johannes Weiner, Chris Mason, Fengguang Wu, Nick Piggin (who did a lot of great work) and others. Cc: npiggin@suse.de Cc: riel@redhat.com Signed-off-by: Andi Kleen Acked-by: Rik van Riel Reviewed-by: Hidehiro Kawai --- include/linux/mm.h | 7 +++++++ include/linux/rmap.h | 1 + 2 files changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index a16018f7d61c..1ffca03f34b7 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1309,5 +1309,12 @@ void vmemmap_populate_print_last(void); extern int account_locked_memory(struct mm_struct *mm, struct rlimit *rlim, size_t size); extern void refund_locked_memory(struct mm_struct *mm, size_t size); + +extern void memory_failure(unsigned long pfn, int trapno); +extern int __memory_failure(unsigned long pfn, int trapno, int ref); +extern int sysctl_memory_failure_early_kill; +extern int sysctl_memory_failure_recovery; +extern atomic_long_t mce_bad_pages; + #endif /* __KERNEL__ */ #endif /* _LINUX_MM_H */ diff --git a/include/linux/rmap.h b/include/linux/rmap.h index ce989f1fc2ed..3c1004e50747 100644 --- a/include/linux/rmap.h +++ b/include/linux/rmap.h @@ -129,6 +129,7 @@ int try_to_munlock(struct page *); */ struct anon_vma *page_lock_anon_vma(struct page *page); void page_unlock_anon_vma(struct anon_vma *anon_vma); +int page_mapped_in_vma(struct page *page, struct vm_area_struct *vma); #else /* !CONFIG_MMU */ -- cgit v1.2.3 From 2c96ce9f2084c1e04d02883e622f74a537a63aea Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 15 Sep 2009 09:43:56 +0200 Subject: fs: remove bdev->bd_inode_backing_dev_info It has been unused since it was introduced in: commit 520808bf20e90fdbdb320264ba7dd5cf9d47dcac Author: Andrew Morton Date: Fri May 21 00:46:17 2004 -0700 [PATCH] block device layer: separate backing_dev_info infrastructure So lets just kill it. Acked-by: Jan Kara Signed-off-by: Jens Axboe --- include/linux/fs.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index b21cf6b9c80b..db29588874ac 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -655,7 +655,6 @@ struct block_device { int bd_invalidated; struct gendisk * bd_disk; struct list_head bd_list; - struct backing_dev_info *bd_inode_backing_dev_info; /* * Private data. You must have bd_claim'ed the block_device * to use this. NOTE: bd_claim allows an owner to claim -- cgit v1.2.3 From 1fe06ad89255c211fe100d7f690d10b161398df8 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 15 Sep 2009 15:10:20 +0200 Subject: writeback: get rid of wbc->for_writepages It's only set, it's never checked. Kill it. Acked-by: Jan Kara Signed-off-by: Jens Axboe --- include/linux/writeback.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/writeback.h b/include/linux/writeback.h index d347632f1861..48a054e2b716 100644 --- a/include/linux/writeback.h +++ b/include/linux/writeback.h @@ -50,7 +50,6 @@ struct writeback_control { unsigned encountered_congestion:1; /* An output: a queue is full */ unsigned for_kupdate:1; /* A kupdate writeback */ unsigned for_reclaim:1; /* Invoked from the page allocator */ - unsigned for_writepages:1; /* This is a writepages() call */ unsigned range_cyclic:1; /* range_start is cyclic */ unsigned more_io:1; /* more io to be dispatched */ /* -- cgit v1.2.3 From 32a88aa1b6dfb901cec64e1898cac78d0f25028a Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 16 Sep 2009 15:02:33 +0200 Subject: fs: Assign bdi in super_block We do this automatically in get_sb_bdev() from the set_bdev_super() callback. Filesystems that have their own private backing_dev_info must assign that in ->fill_super(). Note that ->s_bdi assignment is required for proper writeback! Acked-by: Christoph Hellwig Signed-off-by: Jens Axboe --- include/linux/fs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index db29588874ac..90162fb3bf04 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1342,6 +1342,7 @@ struct super_block { int s_nr_dentry_unused; /* # of dentry on lru */ struct block_device *s_bdev; + struct backing_dev_info *s_bdi; struct mtd_info *s_mtd; struct list_head s_instances; struct quota_info s_dquot; /* Diskquota specific options */ -- cgit v1.2.3 From cfc4ba5365449cb6b5c9f68d755a142f17da1e47 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Mon, 14 Sep 2009 13:12:40 +0200 Subject: writeback: use RCU to protect bdi_list Now that bdi_writeback_all() no longer handles integrity writeback, it doesn't have to block anymore. This means that we can switch bdi_list reader side protection to RCU. Signed-off-by: Jens Axboe --- include/linux/backing-dev.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h index f169bcb90b58..859e797f4576 100644 --- a/include/linux/backing-dev.h +++ b/include/linux/backing-dev.h @@ -59,6 +59,7 @@ struct bdi_writeback { struct backing_dev_info { struct list_head bdi_list; + struct rcu_head rcu_head; unsigned long ra_pages; /* max readahead in PAGE_CACHE_SIZE units */ unsigned long state; /* Always use atomic bitops on this */ unsigned int capabilities; /* Device capabilities */ -- cgit v1.2.3 From b6e51316daede0633e9274e1e30391cfa4747877 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 16 Sep 2009 15:13:54 +0200 Subject: writeback: separate starting of sync vs opportunistic writeback bdi_start_writeback() is currently split into two paths, one for WB_SYNC_NONE and one for WB_SYNC_ALL. Add bdi_sync_writeback() for WB_SYNC_ALL writeback and let bdi_start_writeback() handle only WB_SYNC_NONE. Push down the writeback_control allocation and only accept the parameters that make sense for each function. This cleans up the API considerably. Signed-off-by: Jens Axboe --- include/linux/backing-dev.h | 2 +- include/linux/writeback.h | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h index 859e797f4576..0ee33c2e6129 100644 --- a/include/linux/backing-dev.h +++ b/include/linux/backing-dev.h @@ -101,7 +101,7 @@ int bdi_register(struct backing_dev_info *bdi, struct device *parent, const char *fmt, ...); int bdi_register_dev(struct backing_dev_info *bdi, dev_t dev); void bdi_unregister(struct backing_dev_info *bdi); -void bdi_start_writeback(struct writeback_control *wbc); +void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages); int bdi_writeback_task(struct bdi_writeback *wb); int bdi_has_dirty_io(struct backing_dev_info *bdi); diff --git a/include/linux/writeback.h b/include/linux/writeback.h index 48a054e2b716..75cf58666ff9 100644 --- a/include/linux/writeback.h +++ b/include/linux/writeback.h @@ -68,8 +68,8 @@ struct writeback_control { */ struct bdi_writeback; int inode_wait(void *); -long writeback_inodes_sb(struct super_block *); -long sync_inodes_sb(struct super_block *); +void writeback_inodes_sb(struct super_block *); +void sync_inodes_sb(struct super_block *); void writeback_inodes_wbc(struct writeback_control *wbc); long wb_do_writeback(struct bdi_writeback *wb, int force_wait); void wakeup_flusher_threads(long nr_pages); -- cgit v1.2.3 From 182a85f8a119c789610a9d464f4129ded9f3c107 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 16 Sep 2009 13:24:49 +0200 Subject: sched: Disable wakeup balancing Sysbench thinks SD_BALANCE_WAKE is too agressive and kbuild doesn't really mind too much, SD_BALANCE_NEWIDLE picks up most of the slack. On a dual socket, quad core, dual thread nehalem system: sysbench (--num_threads=16): SD_BALANCE_WAKE-: 13982 tx/s SD_BALANCE_WAKE+: 15688 tx/s kbuild (-j16): SD_BALANCE_WAKE-: 47.648295846 seconds time elapsed ( +- 0.312% ) SD_BALANCE_WAKE+: 47.608607360 seconds time elapsed ( +- 0.026% ) (same within noise) Signed-off-by: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- include/linux/topology.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/topology.h b/include/linux/topology.h index a6614b0242a9..809b26c07090 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -95,7 +95,7 @@ int arch_update_cpu_topology(void); | 1*SD_BALANCE_NEWIDLE \ | 1*SD_BALANCE_EXEC \ | 1*SD_BALANCE_FORK \ - | 1*SD_BALANCE_WAKE \ + | 0*SD_BALANCE_WAKE \ | 1*SD_WAKE_AFFINE \ | 1*SD_SHARE_CPUPOWER \ | 0*SD_POWERSAVINGS_BALANCE \ @@ -127,7 +127,7 @@ int arch_update_cpu_topology(void); | 1*SD_BALANCE_NEWIDLE \ | 1*SD_BALANCE_EXEC \ | 1*SD_BALANCE_FORK \ - | 1*SD_BALANCE_WAKE \ + | 0*SD_BALANCE_WAKE \ | 1*SD_WAKE_AFFINE \ | 1*SD_PREFER_LOCAL \ | 0*SD_SHARE_CPUPOWER \ @@ -160,7 +160,7 @@ int arch_update_cpu_topology(void); | 1*SD_BALANCE_NEWIDLE \ | 1*SD_BALANCE_EXEC \ | 1*SD_BALANCE_FORK \ - | 1*SD_BALANCE_WAKE \ + | 0*SD_BALANCE_WAKE \ | 1*SD_WAKE_AFFINE \ | 1*SD_PREFER_LOCAL \ | 0*SD_SHARE_CPUPOWER \ -- cgit v1.2.3 From 9c28cbccec66a5ca292c6659bf5a0fe0c8459fa7 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 3 Aug 2009 19:21:00 +0200 Subject: jbd: Journal block numbers can ever be only 32-bit use unsigned int for them It does not make sense to store block number for journal as unsigned long since they can be only 32-bit (because of on-disk format limitation). So change in-memory structures and variables to use unsigned int instead. Signed-off-by: Jan Kara --- include/linux/jbd.h | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) (limited to 'include/linux') diff --git a/include/linux/jbd.h b/include/linux/jbd.h index c2049a04fa0b..a1187a0c99b4 100644 --- a/include/linux/jbd.h +++ b/include/linux/jbd.h @@ -446,7 +446,7 @@ struct transaction_s /* * Where in the log does this transaction's commit start? [no locking] */ - unsigned long t_log_start; + unsigned int t_log_start; /* Number of buffers on the t_buffers list [j_list_lock] */ int t_nr_buffers; @@ -701,26 +701,26 @@ struct journal_s * Journal head: identifies the first unused block in the journal. * [j_state_lock] */ - unsigned long j_head; + unsigned int j_head; /* * Journal tail: identifies the oldest still-used block in the journal. * [j_state_lock] */ - unsigned long j_tail; + unsigned int j_tail; /* * Journal free: how many free blocks are there in the journal? * [j_state_lock] */ - unsigned long j_free; + unsigned int j_free; /* * Journal start and end: the block numbers of the first usable block * and one beyond the last usable block in the journal. [j_state_lock] */ - unsigned long j_first; - unsigned long j_last; + unsigned int j_first; + unsigned int j_last; /* * Device, blocksize and starting block offset for the location where we @@ -728,7 +728,7 @@ struct journal_s */ struct block_device *j_dev; int j_blocksize; - unsigned long j_blk_offset; + unsigned int j_blk_offset; /* * Device which holds the client fs. For internal journal this will be @@ -859,7 +859,7 @@ extern void __journal_clean_data_list(transaction_t *transaction); /* Log buffer allocation */ extern struct journal_head * journal_get_descriptor_buffer(journal_t *); -int journal_next_log_block(journal_t *, unsigned long *); +int journal_next_log_block(journal_t *, unsigned int *); /* Commit management */ extern void journal_commit_transaction(journal_t *); @@ -874,7 +874,7 @@ extern int journal_write_metadata_buffer(transaction_t *transaction, struct journal_head *jh_in, struct journal_head **jh_out, - unsigned long blocknr); + unsigned int blocknr); /* Transaction locking */ extern void __wait_on_journal (journal_t *); @@ -942,7 +942,7 @@ extern void journal_abort (journal_t *, int); extern int journal_errno (journal_t *); extern void journal_ack_err (journal_t *); extern int journal_clear_err (journal_t *); -extern int journal_bmap(journal_t *, unsigned long, unsigned long *); +extern int journal_bmap(journal_t *, unsigned int, unsigned int *); extern int journal_force_commit(journal_t *); /* @@ -976,14 +976,14 @@ extern int journal_init_revoke_caches(void); extern void journal_destroy_revoke(journal_t *); extern int journal_revoke (handle_t *, - unsigned long, struct buffer_head *); + unsigned int, struct buffer_head *); extern int journal_cancel_revoke(handle_t *, struct journal_head *); extern void journal_write_revoke_records(journal_t *, transaction_t *, int); /* Recovery revoke support */ -extern int journal_set_revoke(journal_t *, unsigned long, tid_t); -extern int journal_test_revoke(journal_t *, unsigned long, tid_t); +extern int journal_set_revoke(journal_t *, unsigned int, tid_t); +extern int journal_test_revoke(journal_t *, unsigned int, tid_t); extern void journal_clear_revoke(journal_t *); extern void journal_switch_revoke_table(journal_t *journal); -- cgit v1.2.3 From 9f7b07d6cc3ed14783c9427a5b2a69794eb2de64 Mon Sep 17 00:00:00 2001 From: Daniel Ribeiro Date: Tue, 23 Jun 2009 12:32:11 -0300 Subject: mfd: Introduce irq_to_pcap() Export an irq_to_pcap function to get pcap irq number, for the keypad driver. Signed-off-by: Daniel Ribeiro Signed-off-by: Samuel Ortiz --- include/linux/mfd/ezx-pcap.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mfd/ezx-pcap.h b/include/linux/mfd/ezx-pcap.h index c12c3c0932bf..6296b4935a1e 100644 --- a/include/linux/mfd/ezx-pcap.h +++ b/include/linux/mfd/ezx-pcap.h @@ -26,6 +26,7 @@ struct pcap_chip; int ezx_pcap_write(struct pcap_chip *, u8, u32); int ezx_pcap_read(struct pcap_chip *, u8, u32 *); int pcap_to_irq(struct pcap_chip *, int); +int irq_to_pcap(struct pcap_chip *, int); int pcap_adc_async(struct pcap_chip *, u8, u32, u8[], void *, void *); int pcap_adc_sync(struct pcap_chip *, u8, u32, u8[], u16[]); -- cgit v1.2.3 From ecd78cbdb989fd593bf4fd69cdb572200e70a553 Mon Sep 17 00:00:00 2001 From: Daniel Ribeiro Date: Tue, 23 Jun 2009 12:33:10 -0300 Subject: mfd: add set_ts_bits for pcap Some TS controller bits are on the same register as the ADC control, save TS specific bits and export a set_ts_bits function so the TS driver can set it with the adc_mutex lock held. Signed-off-by: Daniel Ribeiro Signed-off-by: Samuel Ortiz --- include/linux/mfd/ezx-pcap.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mfd/ezx-pcap.h b/include/linux/mfd/ezx-pcap.h index 6296b4935a1e..b15caacf0720 100644 --- a/include/linux/mfd/ezx-pcap.h +++ b/include/linux/mfd/ezx-pcap.h @@ -29,6 +29,7 @@ int pcap_to_irq(struct pcap_chip *, int); int irq_to_pcap(struct pcap_chip *, int); int pcap_adc_async(struct pcap_chip *, u8, u32, u8[], void *, void *); int pcap_adc_sync(struct pcap_chip *, u8, u32, u8[], u16[]); +void pcap_set_ts_bits(struct pcap_chip *, u32); #define PCAP_SECOND_PORT 1 #define PCAP_CS_AH 2 -- cgit v1.2.3 From e9a22635b0d794d0cb242ffb0249f7b2a410bca2 Mon Sep 17 00:00:00 2001 From: Daniel Ribeiro Date: Sat, 27 Jun 2009 00:17:20 -0300 Subject: mfd: add ezx_pcap_setbits Provides an atomic set_bits functions, as needed by the pcap-regulator driver. Signed-off-by: Daniel Ribeiro Signed-off-by: Samuel Ortiz --- include/linux/mfd/ezx-pcap.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mfd/ezx-pcap.h b/include/linux/mfd/ezx-pcap.h index b15caacf0720..dec82b0b05f9 100644 --- a/include/linux/mfd/ezx-pcap.h +++ b/include/linux/mfd/ezx-pcap.h @@ -25,6 +25,7 @@ struct pcap_chip; int ezx_pcap_write(struct pcap_chip *, u8, u32); int ezx_pcap_read(struct pcap_chip *, u8, u32 *); +int ezx_pcap_set_bits(struct pcap_chip *, u8, u32, u32); int pcap_to_irq(struct pcap_chip *, int); int irq_to_pcap(struct pcap_chip *, int); int pcap_adc_async(struct pcap_chip *, u8, u32, u8[], void *, void *); -- cgit v1.2.3 From fb6c023a2b845df1ec383b74644ac35a4bbb76b6 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 20 Jul 2009 12:43:45 +0100 Subject: hwmon: Add WM835x PMIC hardware monitoring driver This driver provides reporting of the status supply voltage rails of the WM835x series of PMICs via the hwmon API. Signed-off-by: Mark Brown Acked-by: Jean Delvare Signed-off-by: Samuel Ortiz --- include/linux/mfd/wm8350/core.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/wm8350/core.h b/include/linux/mfd/wm8350/core.h index 42cca672f340..969b0b55615c 100644 --- a/include/linux/mfd/wm8350/core.h +++ b/include/linux/mfd/wm8350/core.h @@ -605,6 +605,11 @@ struct wm8350_irq { void *data; }; +struct wm8350_hwmon { + struct platform_device *pdev; + struct device *classdev; +}; + struct wm8350 { struct device *dev; @@ -629,6 +634,7 @@ struct wm8350 { /* Client devices */ struct wm8350_codec codec; struct wm8350_gpio gpio; + struct wm8350_hwmon hwmon; struct wm8350_pmic pmic; struct wm8350_power power; struct wm8350_rtc rtc; -- cgit v1.2.3 From ed52e62ebec9e703eb0b69704feaf1b6e847d882 Mon Sep 17 00:00:00 2001 From: Paul Fertser Date: Tue, 28 Jul 2009 00:41:15 +0400 Subject: mfd: use a dedicated workqueue for pcf50633 irq processing Using the default kernel "events" workqueue causes problems with synchronous adc readings if initiated from some task on the same workqueue. I had a deadlock trying to use pcf50633_adc_sync_read from a power_supply class driver because the reading was initiated from the workqueue and it waited for the irq processing to complete (to get the result) and that was put on the same workqueue. Signed-off-by: Paul Fertser Signed-off-by: Samuel Ortiz --- include/linux/mfd/pcf50633/core.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mfd/pcf50633/core.h b/include/linux/mfd/pcf50633/core.h index c8f51c3c0a72..9aba7b779fbc 100644 --- a/include/linux/mfd/pcf50633/core.h +++ b/include/linux/mfd/pcf50633/core.h @@ -136,6 +136,7 @@ struct pcf50633 { int irq; struct pcf50633_irq irq_handler[PCF50633_NUM_IRQ]; struct work_struct irq_work; + struct workqueue_struct *work_queue; struct mutex lock; u8 mask_regs[5]; -- cgit v1.2.3 From 8d360d8c03e1e8514bbaf606b1cd3b818dfc445d Mon Sep 17 00:00:00 2001 From: Paul Fertser Date: Tue, 28 Jul 2009 01:09:04 +0400 Subject: mfd: fix wrong define for 10bit pcf50633 ADC mode The 10 bits definition was the 8 bits one. Signed-off-by: Paul Fertser Signed-off-by: Samuel Ortiz --- include/linux/mfd/pcf50633/adc.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mfd/pcf50633/adc.h b/include/linux/mfd/pcf50633/adc.h index 56669b4183ad..b35e62801ffa 100644 --- a/include/linux/mfd/pcf50633/adc.h +++ b/include/linux/mfd/pcf50633/adc.h @@ -25,7 +25,8 @@ #define PCF50633_REG_ADCS3 0x57 #define PCF50633_ADCC1_ADCSTART 0x01 -#define PCF50633_ADCC1_RES_10BIT 0x02 +#define PCF50633_ADCC1_RES_8BIT 0x02 +#define PCF50633_ADCC1_RES_10BIT 0x00 #define PCF50633_ADCC1_AVERAGE_NO 0x00 #define PCF50633_ADCC1_AVERAGE_4 0x04 #define PCF50633_ADCC1_AVERAGE_8 0x08 -- cgit v1.2.3 From 327bc3a3efa408fb285948bfef112a6c58dfb375 Mon Sep 17 00:00:00 2001 From: Daniel Ribeiro Date: Fri, 31 Jul 2009 12:38:02 +0200 Subject: mfd: Remove VIB defines from pcap header file Vibrator will be accessed via the pcap-regulator driver, no need to expose its bits in the header file. Signed-off-by: Daniel Ribeiro Signed-off-by: Samuel Ortiz --- include/linux/mfd/ezx-pcap.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/ezx-pcap.h b/include/linux/mfd/ezx-pcap.h index dec82b0b05f9..e5124ceea769 100644 --- a/include/linux/mfd/ezx-pcap.h +++ b/include/linux/mfd/ezx-pcap.h @@ -227,7 +227,6 @@ void pcap_set_ts_bits(struct pcap_chip *, u32); #define PCAP_LED1 1 #define PCAP_BL0 2 #define PCAP_BL1 3 -#define PCAP_VIB 4 #define PCAP_LED_3MA 0 #define PCAP_LED_4MA 1 #define PCAP_LED_5MA 2 @@ -246,9 +245,6 @@ void pcap_set_ts_bits(struct pcap_chip *, u32); #define PCAP_LED0_C_SHIFT 15 #define PCAP_LED1_C_SHIFT 17 #define PCAP_BL1_SHIFT 20 -#define PCAP_VIB_MASK 0x3 -#define PCAP_VIB_SHIFT 20 -#define PCAP_VIB_EN (1 << 19) /* RTC */ #define PCAP_RTC_DAY_MASK 0x3fff -- cgit v1.2.3 From 3bed6e415fc2cbf8d706848a62a48aebe84435e5 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 27 Jul 2009 14:45:51 +0100 Subject: mfd: Allow multiple MFD cells with the same name Provide basic support for MFDs having multiple cells of a given type with different IDs by adding an id to the mfd_cell structure and then adding that to the id passed in to mfd_add_devices(). As it stands this approach requires that MFDs using this feature deal with ensuring that there aren't any ID collisions resulting from multiple MFDs of the same type being instantiated. This needs to happen with the existing code too, but with this approach there is a knock on effect on the IDs for non-duplicated devices. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/core.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h index 49ef857cdb2d..11d740b8831d 100644 --- a/include/linux/mfd/core.h +++ b/include/linux/mfd/core.h @@ -23,6 +23,7 @@ */ struct mfd_cell { const char *name; + int id; int (*enable)(struct platform_device *dev); int (*disable)(struct platform_device *dev); -- cgit v1.2.3 From d2bedfe7a8b2f34beee2cad9cae74a088ee8ed07 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 27 Jul 2009 14:45:52 +0100 Subject: mfd: Initial core support for WM831x series devices The WM831x series of devices are register compatible processor power management subsystems, providing regulator and power path management facilities along with other services like watchdog, RTC and touch panel controllers. This patch adds very basic support, providing basic single register I2C access, handling of the security key and registration of the devices. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/wm831x/core.h | 247 +++++++++++++++++++++++++++++++++++++++ include/linux/mfd/wm831x/pdata.h | 107 +++++++++++++++++ 2 files changed, 354 insertions(+) create mode 100644 include/linux/mfd/wm831x/core.h create mode 100644 include/linux/mfd/wm831x/pdata.h (limited to 'include/linux') diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h new file mode 100644 index 000000000000..d90e693053ba --- /dev/null +++ b/include/linux/mfd/wm831x/core.h @@ -0,0 +1,247 @@ +/* + * include/linux/mfd/wm831x/core.h -- Core interface for WM831x + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MFD_WM831X_CORE_H__ +#define __MFD_WM831X_CORE_H__ + +/* + * Register values. + */ +#define WM831X_RESET_ID 0x00 +#define WM831X_REVISION 0x01 +#define WM831X_PARENT_ID 0x4000 +#define WM831X_SYSVDD_CONTROL 0x4001 +#define WM831X_THERMAL_MONITORING 0x4002 +#define WM831X_POWER_STATE 0x4003 +#define WM831X_WATCHDOG 0x4004 +#define WM831X_ON_PIN_CONTROL 0x4005 +#define WM831X_RESET_CONTROL 0x4006 +#define WM831X_CONTROL_INTERFACE 0x4007 +#define WM831X_SECURITY_KEY 0x4008 +#define WM831X_SOFTWARE_SCRATCH 0x4009 +#define WM831X_OTP_CONTROL 0x400A +#define WM831X_GPIO_LEVEL 0x400C +#define WM831X_SYSTEM_STATUS 0x400D +#define WM831X_ON_SOURCE 0x400E +#define WM831X_OFF_SOURCE 0x400F +#define WM831X_SYSTEM_INTERRUPTS 0x4010 +#define WM831X_INTERRUPT_STATUS_1 0x4011 +#define WM831X_INTERRUPT_STATUS_2 0x4012 +#define WM831X_INTERRUPT_STATUS_3 0x4013 +#define WM831X_INTERRUPT_STATUS_4 0x4014 +#define WM831X_INTERRUPT_STATUS_5 0x4015 +#define WM831X_IRQ_CONFIG 0x4017 +#define WM831X_SYSTEM_INTERRUPTS_MASK 0x4018 +#define WM831X_INTERRUPT_STATUS_1_MASK 0x4019 +#define WM831X_INTERRUPT_STATUS_2_MASK 0x401A +#define WM831X_INTERRUPT_STATUS_3_MASK 0x401B +#define WM831X_INTERRUPT_STATUS_4_MASK 0x401C +#define WM831X_INTERRUPT_STATUS_5_MASK 0x401D +#define WM831X_RTC_WRITE_COUNTER 0x4020 +#define WM831X_RTC_TIME_1 0x4021 +#define WM831X_RTC_TIME_2 0x4022 +#define WM831X_RTC_ALARM_1 0x4023 +#define WM831X_RTC_ALARM_2 0x4024 +#define WM831X_RTC_CONTROL 0x4025 +#define WM831X_RTC_TRIM 0x4026 +#define WM831X_TOUCH_CONTROL_1 0x4028 +#define WM831X_TOUCH_CONTROL_2 0x4029 +#define WM831X_TOUCH_DATA_X 0x402A +#define WM831X_TOUCH_DATA_Y 0x402B +#define WM831X_TOUCH_DATA_Z 0x402C +#define WM831X_AUXADC_DATA 0x402D +#define WM831X_AUXADC_CONTROL 0x402E +#define WM831X_AUXADC_SOURCE 0x402F +#define WM831X_COMPARATOR_CONTROL 0x4030 +#define WM831X_COMPARATOR_1 0x4031 +#define WM831X_COMPARATOR_2 0x4032 +#define WM831X_COMPARATOR_3 0x4033 +#define WM831X_COMPARATOR_4 0x4034 +#define WM831X_GPIO1_CONTROL 0x4038 +#define WM831X_GPIO2_CONTROL 0x4039 +#define WM831X_GPIO3_CONTROL 0x403A +#define WM831X_GPIO4_CONTROL 0x403B +#define WM831X_GPIO5_CONTROL 0x403C +#define WM831X_GPIO6_CONTROL 0x403D +#define WM831X_GPIO7_CONTROL 0x403E +#define WM831X_GPIO8_CONTROL 0x403F +#define WM831X_GPIO9_CONTROL 0x4040 +#define WM831X_GPIO10_CONTROL 0x4041 +#define WM831X_GPIO11_CONTROL 0x4042 +#define WM831X_GPIO12_CONTROL 0x4043 +#define WM831X_GPIO13_CONTROL 0x4044 +#define WM831X_GPIO14_CONTROL 0x4045 +#define WM831X_GPIO15_CONTROL 0x4046 +#define WM831X_GPIO16_CONTROL 0x4047 +#define WM831X_CHARGER_CONTROL_1 0x4048 +#define WM831X_CHARGER_CONTROL_2 0x4049 +#define WM831X_CHARGER_STATUS 0x404A +#define WM831X_BACKUP_CHARGER_CONTROL 0x404B +#define WM831X_STATUS_LED_1 0x404C +#define WM831X_STATUS_LED_2 0x404D +#define WM831X_CURRENT_SINK_1 0x404E +#define WM831X_CURRENT_SINK_2 0x404F +#define WM831X_DCDC_ENABLE 0x4050 +#define WM831X_LDO_ENABLE 0x4051 +#define WM831X_DCDC_STATUS 0x4052 +#define WM831X_LDO_STATUS 0x4053 +#define WM831X_DCDC_UV_STATUS 0x4054 +#define WM831X_LDO_UV_STATUS 0x4055 +#define WM831X_DC1_CONTROL_1 0x4056 +#define WM831X_DC1_CONTROL_2 0x4057 +#define WM831X_DC1_ON_CONFIG 0x4058 +#define WM831X_DC1_SLEEP_CONTROL 0x4059 +#define WM831X_DC1_DVS_CONTROL 0x405A +#define WM831X_DC2_CONTROL_1 0x405B +#define WM831X_DC2_CONTROL_2 0x405C +#define WM831X_DC2_ON_CONFIG 0x405D +#define WM831X_DC2_SLEEP_CONTROL 0x405E +#define WM831X_DC2_DVS_CONTROL 0x405F +#define WM831X_DC3_CONTROL_1 0x4060 +#define WM831X_DC3_CONTROL_2 0x4061 +#define WM831X_DC3_ON_CONFIG 0x4062 +#define WM831X_DC3_SLEEP_CONTROL 0x4063 +#define WM831X_DC4_CONTROL 0x4064 +#define WM831X_DC4_SLEEP_CONTROL 0x4065 +#define WM831X_EPE1_CONTROL 0x4066 +#define WM831X_EPE2_CONTROL 0x4067 +#define WM831X_LDO1_CONTROL 0x4068 +#define WM831X_LDO1_ON_CONTROL 0x4069 +#define WM831X_LDO1_SLEEP_CONTROL 0x406A +#define WM831X_LDO2_CONTROL 0x406B +#define WM831X_LDO2_ON_CONTROL 0x406C +#define WM831X_LDO2_SLEEP_CONTROL 0x406D +#define WM831X_LDO3_CONTROL 0x406E +#define WM831X_LDO3_ON_CONTROL 0x406F +#define WM831X_LDO3_SLEEP_CONTROL 0x4070 +#define WM831X_LDO4_CONTROL 0x4071 +#define WM831X_LDO4_ON_CONTROL 0x4072 +#define WM831X_LDO4_SLEEP_CONTROL 0x4073 +#define WM831X_LDO5_CONTROL 0x4074 +#define WM831X_LDO5_ON_CONTROL 0x4075 +#define WM831X_LDO5_SLEEP_CONTROL 0x4076 +#define WM831X_LDO6_CONTROL 0x4077 +#define WM831X_LDO6_ON_CONTROL 0x4078 +#define WM831X_LDO6_SLEEP_CONTROL 0x4079 +#define WM831X_LDO7_CONTROL 0x407A +#define WM831X_LDO7_ON_CONTROL 0x407B +#define WM831X_LDO7_SLEEP_CONTROL 0x407C +#define WM831X_LDO8_CONTROL 0x407D +#define WM831X_LDO8_ON_CONTROL 0x407E +#define WM831X_LDO8_SLEEP_CONTROL 0x407F +#define WM831X_LDO9_CONTROL 0x4080 +#define WM831X_LDO9_ON_CONTROL 0x4081 +#define WM831X_LDO9_SLEEP_CONTROL 0x4082 +#define WM831X_LDO10_CONTROL 0x4083 +#define WM831X_LDO10_ON_CONTROL 0x4084 +#define WM831X_LDO10_SLEEP_CONTROL 0x4085 +#define WM831X_LDO11_ON_CONTROL 0x4087 +#define WM831X_LDO11_SLEEP_CONTROL 0x4088 +#define WM831X_POWER_GOOD_SOURCE_1 0x408E +#define WM831X_POWER_GOOD_SOURCE_2 0x408F +#define WM831X_CLOCK_CONTROL_1 0x4090 +#define WM831X_CLOCK_CONTROL_2 0x4091 +#define WM831X_FLL_CONTROL_1 0x4092 +#define WM831X_FLL_CONTROL_2 0x4093 +#define WM831X_FLL_CONTROL_3 0x4094 +#define WM831X_FLL_CONTROL_4 0x4095 +#define WM831X_FLL_CONTROL_5 0x4096 +#define WM831X_UNIQUE_ID_1 0x7800 +#define WM831X_UNIQUE_ID_2 0x7801 +#define WM831X_UNIQUE_ID_3 0x7802 +#define WM831X_UNIQUE_ID_4 0x7803 +#define WM831X_UNIQUE_ID_5 0x7804 +#define WM831X_UNIQUE_ID_6 0x7805 +#define WM831X_UNIQUE_ID_7 0x7806 +#define WM831X_UNIQUE_ID_8 0x7807 +#define WM831X_FACTORY_OTP_ID 0x7808 +#define WM831X_FACTORY_OTP_1 0x7809 +#define WM831X_FACTORY_OTP_2 0x780A +#define WM831X_FACTORY_OTP_3 0x780B +#define WM831X_FACTORY_OTP_4 0x780C +#define WM831X_FACTORY_OTP_5 0x780D +#define WM831X_CUSTOMER_OTP_ID 0x7810 +#define WM831X_DC1_OTP_CONTROL 0x7811 +#define WM831X_DC2_OTP_CONTROL 0x7812 +#define WM831X_DC3_OTP_CONTROL 0x7813 +#define WM831X_LDO1_2_OTP_CONTROL 0x7814 +#define WM831X_LDO3_4_OTP_CONTROL 0x7815 +#define WM831X_LDO5_6_OTP_CONTROL 0x7816 +#define WM831X_LDO7_8_OTP_CONTROL 0x7817 +#define WM831X_LDO9_10_OTP_CONTROL 0x7818 +#define WM831X_LDO11_EPE_CONTROL 0x7819 +#define WM831X_GPIO1_OTP_CONTROL 0x781A +#define WM831X_GPIO2_OTP_CONTROL 0x781B +#define WM831X_GPIO3_OTP_CONTROL 0x781C +#define WM831X_GPIO4_OTP_CONTROL 0x781D +#define WM831X_GPIO5_OTP_CONTROL 0x781E +#define WM831X_GPIO6_OTP_CONTROL 0x781F +#define WM831X_DBE_CHECK_DATA 0x7827 + +/* + * R0 (0x00) - Reset ID + */ +#define WM831X_CHIP_ID_MASK 0xFFFF /* CHIP_ID - [15:0] */ +#define WM831X_CHIP_ID_SHIFT 0 /* CHIP_ID - [15:0] */ +#define WM831X_CHIP_ID_WIDTH 16 /* CHIP_ID - [15:0] */ + +/* + * R1 (0x01) - Revision + */ +#define WM831X_PARENT_REV_MASK 0xFF00 /* PARENT_REV - [15:8] */ +#define WM831X_PARENT_REV_SHIFT 8 /* PARENT_REV - [15:8] */ +#define WM831X_PARENT_REV_WIDTH 8 /* PARENT_REV - [15:8] */ +#define WM831X_CHILD_REV_MASK 0x00FF /* CHILD_REV - [7:0] */ +#define WM831X_CHILD_REV_SHIFT 0 /* CHILD_REV - [7:0] */ +#define WM831X_CHILD_REV_WIDTH 8 /* CHILD_REV - [7:0] */ + +/* + * R16384 (0x4000) - Parent ID + */ +#define WM831X_PARENT_ID_MASK 0xFFFF /* PARENT_ID - [15:0] */ +#define WM831X_PARENT_ID_SHIFT 0 /* PARENT_ID - [15:0] */ +#define WM831X_PARENT_ID_WIDTH 16 /* PARENT_ID - [15:0] */ + +struct wm831x { + struct mutex io_lock; + + struct device *dev; + int (*read_dev)(struct wm831x *wm831x, unsigned short reg, + int bytes, void *dest); + int (*write_dev)(struct wm831x *wm831x, unsigned short reg, + int bytes, void *src); + + void *control_data; + + /* The WM831x has a security key blocking access to certain + * registers. The mutex is taken by the accessors for locking + * and unlocking the security key, locked is used to fail + * writes if the lock is held. + */ + struct mutex key_lock; + unsigned int locked:1; +}; + +/* Device I/O API */ +int wm831x_reg_read(struct wm831x *wm831x, unsigned short reg); +int wm831x_reg_write(struct wm831x *wm831x, unsigned short reg, + unsigned short val); +void wm831x_reg_lock(struct wm831x *wm831x); +int wm831x_reg_unlock(struct wm831x *wm831x); +int wm831x_set_bits(struct wm831x *wm831x, unsigned short reg, + unsigned short mask, unsigned short val); +int wm831x_bulk_read(struct wm831x *wm831x, unsigned short reg, + int count, u16 *buf); + +#endif diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h new file mode 100644 index 000000000000..571e60136264 --- /dev/null +++ b/include/linux/mfd/wm831x/pdata.h @@ -0,0 +1,107 @@ +/* + * include/linux/mfd/wm831x/pdata.h -- Platform data for WM831x + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MFD_WM831X_PDATA_H__ +#define __MFD_WM831X_PDATA_H__ + +struct wm831x; +struct regulator_init_data; + +struct wm831x_backup_pdata { + int charger_enable; + int no_constant_voltage; /** Disable constant voltage charging */ + int vlim; /** Voltage limit in milivolts */ + int ilim; /** Current limit in microamps */ +}; + +struct wm831x_battery_pdata { + int enable; /** Enable charging */ + int fast_enable; /** Enable fast charging */ + int off_mask; /** Mask OFF while charging */ + int trickle_ilim; /** Trickle charge current limit, in mA */ + int vsel; /** Target voltage, in mV */ + int eoc_iterm; /** End of trickle charge current, in mA */ + int fast_ilim; /** Fast charge current limit, in mA */ + int timeout; /** Charge cycle timeout, in minutes */ +}; + +/* Sources for status LED configuration. Values are register values + * plus 1 to allow for a zero default for preserve. + */ +enum wm831x_status_src { + WM831X_STATUS_PRESERVE = 0, /* Keep the current hardware setting */ + WM831X_STATUS_OTP = 1, + WM831X_STATUS_POWER = 2, + WM831X_STATUS_CHARGER = 3, + WM831X_STATUS_MANUAL = 4, +}; + +struct wm831x_status_pdata { + enum wm831x_status_src default_src; + const char *name; + const char *default_trigger; +}; + +struct wm831x_touch_pdata { + int fivewire; /** 1 for five wire mode, 0 for 4 wire */ + int isel; /** Current for pen down (uA) */ + int rpu; /** Pen down sensitivity resistor divider */ + int pressure; /** Report pressure (boolean) */ + int data_irq; /** Touch data ready IRQ */ +}; + +enum wm831x_watchdog_action { + WM831X_WDOG_NONE = 0, + WM831X_WDOG_INTERRUPT = 1, + WM831X_WDOG_RESET = 2, + WM831X_WDOG_WAKE = 3, +}; + +struct wm831x_watchdog_pdata { + enum wm831x_watchdog_action primary, secondary; + int update_gpio; + unsigned int software:1; +}; + +#define WM831X_MAX_STATUS 2 +#define WM831X_MAX_DCDC 4 +#define WM831X_MAX_EPE 2 +#define WM831X_MAX_LDO 11 +#define WM831X_MAX_ISINK 2 + +struct wm831x_pdata { + /** Called before subdevices are set up */ + int (*pre_init)(struct wm831x *wm831x); + /** Called after subdevices are set up */ + int (*post_init)(struct wm831x *wm831x); + + int gpio_base; + struct wm831x_backup_pdata *backup; + struct wm831x_battery_pdata *battery; + struct wm831x_touch_pdata *touch; + struct wm831x_watchdog_pdata *watchdog; + + /** LED1 = 0 and so on */ + struct wm831x_status_pdata *status[WM831X_MAX_STATUS]; + /** DCDC1 = 0 and so on */ + struct regulator_init_data *dcdc[WM831X_MAX_DCDC]; + /** EPE1 = 0 and so on */ + struct regulator_init_data *epe[WM831X_MAX_EPE]; + /** LDO1 = 0 and so on */ + struct regulator_init_data *ldo[WM831X_MAX_LDO]; + /** ISINK1 = 0 and so on*/ + struct regulator_init_data *isink[WM831X_MAX_ISINK]; +}; + +#endif -- cgit v1.2.3 From 7d4d0a3e7343e3190afaa17253073db58e3d9bff Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 27 Jul 2009 14:45:53 +0100 Subject: mfd: Add WM831x interrupt support The WM831x includes an interrupt controller managing interrupts for the various functions on the chip. This patch adds support for the core interrupt block on the device. Ideally this would be supported by genirq, particularly for the GPIOs, but currently genirq is unable to cope with controllers on interrupt driven buses so we cut'n'paste the generic interface. Once genirq is able to cope chips like this it should be a case of filing the prefixes off the code and redoing wm831x-irq.c to move over. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/wm831x/core.h | 21 ++ include/linux/mfd/wm831x/irq.h | 764 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 785 insertions(+) create mode 100644 include/linux/mfd/wm831x/irq.h (limited to 'include/linux') diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h index d90e693053ba..b96c9355b16e 100644 --- a/include/linux/mfd/wm831x/core.h +++ b/include/linux/mfd/wm831x/core.h @@ -15,6 +15,9 @@ #ifndef __MFD_WM831X_CORE_H__ #define __MFD_WM831X_CORE_H__ +#include +#include + /* * Register values. */ @@ -224,6 +227,13 @@ struct wm831x { void *control_data; + int irq; /* Our chip IRQ */ + struct mutex irq_lock; + struct workqueue_struct *irq_wq; + struct work_struct irq_work; + unsigned int irq_base; + int irq_masks[5]; + /* The WM831x has a security key blocking access to certain * registers. The mutex is taken by the accessors for locking * and unlocking the security key, locked is used to fail @@ -244,4 +254,15 @@ int wm831x_set_bits(struct wm831x *wm831x, unsigned short reg, int wm831x_bulk_read(struct wm831x *wm831x, unsigned short reg, int count, u16 *buf); +int wm831x_irq_init(struct wm831x *wm831x, int irq); +void wm831x_irq_exit(struct wm831x *wm831x); + +int __must_check wm831x_request_irq(struct wm831x *wm831x, + unsigned int irq, irq_handler_t handler, + unsigned long flags, const char *name, + void *dev); +void wm831x_free_irq(struct wm831x *wm831x, unsigned int, void *); +void wm831x_disable_irq(struct wm831x *wm831x, int irq); +void wm831x_enable_irq(struct wm831x *wm831x, int irq); + #endif diff --git a/include/linux/mfd/wm831x/irq.h b/include/linux/mfd/wm831x/irq.h new file mode 100644 index 000000000000..3a8c97656fda --- /dev/null +++ b/include/linux/mfd/wm831x/irq.h @@ -0,0 +1,764 @@ +/* + * include/linux/mfd/wm831x/irq.h -- Interrupt controller for WM831x + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MFD_WM831X_IRQ_H__ +#define __MFD_WM831X_IRQ_H__ + +/* Interrupt number assignments within Linux */ +#define WM831X_IRQ_TEMP_THW 0 +#define WM831X_IRQ_GPIO_1 1 +#define WM831X_IRQ_GPIO_2 2 +#define WM831X_IRQ_GPIO_3 3 +#define WM831X_IRQ_GPIO_4 4 +#define WM831X_IRQ_GPIO_5 5 +#define WM831X_IRQ_GPIO_6 6 +#define WM831X_IRQ_GPIO_7 7 +#define WM831X_IRQ_GPIO_8 8 +#define WM831X_IRQ_GPIO_9 9 +#define WM831X_IRQ_GPIO_10 10 +#define WM831X_IRQ_GPIO_11 11 +#define WM831X_IRQ_GPIO_12 12 +#define WM831X_IRQ_GPIO_13 13 +#define WM831X_IRQ_GPIO_14 14 +#define WM831X_IRQ_GPIO_15 15 +#define WM831X_IRQ_GPIO_16 16 +#define WM831X_IRQ_ON 17 +#define WM831X_IRQ_PPM_SYSLO 18 +#define WM831X_IRQ_PPM_PWR_SRC 19 +#define WM831X_IRQ_PPM_USB_CURR 20 +#define WM831X_IRQ_WDOG_TO 21 +#define WM831X_IRQ_RTC_PER 22 +#define WM831X_IRQ_RTC_ALM 23 +#define WM831X_IRQ_CHG_BATT_HOT 24 +#define WM831X_IRQ_CHG_BATT_COLD 25 +#define WM831X_IRQ_CHG_BATT_FAIL 26 +#define WM831X_IRQ_CHG_OV 27 +#define WM831X_IRQ_CHG_END 29 +#define WM831X_IRQ_CHG_TO 30 +#define WM831X_IRQ_CHG_MODE 31 +#define WM831X_IRQ_CHG_START 32 +#define WM831X_IRQ_TCHDATA 33 +#define WM831X_IRQ_TCHPD 34 +#define WM831X_IRQ_AUXADC_DATA 35 +#define WM831X_IRQ_AUXADC_DCOMP1 36 +#define WM831X_IRQ_AUXADC_DCOMP2 37 +#define WM831X_IRQ_AUXADC_DCOMP3 38 +#define WM831X_IRQ_AUXADC_DCOMP4 39 +#define WM831X_IRQ_CS1 40 +#define WM831X_IRQ_CS2 41 +#define WM831X_IRQ_HC_DC1 42 +#define WM831X_IRQ_HC_DC2 43 +#define WM831X_IRQ_UV_LDO1 44 +#define WM831X_IRQ_UV_LDO2 45 +#define WM831X_IRQ_UV_LDO3 46 +#define WM831X_IRQ_UV_LDO4 47 +#define WM831X_IRQ_UV_LDO5 48 +#define WM831X_IRQ_UV_LDO6 49 +#define WM831X_IRQ_UV_LDO7 50 +#define WM831X_IRQ_UV_LDO8 51 +#define WM831X_IRQ_UV_LDO9 52 +#define WM831X_IRQ_UV_LDO10 53 +#define WM831X_IRQ_UV_DC1 54 +#define WM831X_IRQ_UV_DC2 55 +#define WM831X_IRQ_UV_DC3 56 +#define WM831X_IRQ_UV_DC4 57 + +#define WM831X_NUM_IRQS 58 + +/* + * R16400 (0x4010) - System Interrupts + */ +#define WM831X_PS_INT 0x8000 /* PS_INT */ +#define WM831X_PS_INT_MASK 0x8000 /* PS_INT */ +#define WM831X_PS_INT_SHIFT 15 /* PS_INT */ +#define WM831X_PS_INT_WIDTH 1 /* PS_INT */ +#define WM831X_TEMP_INT 0x4000 /* TEMP_INT */ +#define WM831X_TEMP_INT_MASK 0x4000 /* TEMP_INT */ +#define WM831X_TEMP_INT_SHIFT 14 /* TEMP_INT */ +#define WM831X_TEMP_INT_WIDTH 1 /* TEMP_INT */ +#define WM831X_GP_INT 0x2000 /* GP_INT */ +#define WM831X_GP_INT_MASK 0x2000 /* GP_INT */ +#define WM831X_GP_INT_SHIFT 13 /* GP_INT */ +#define WM831X_GP_INT_WIDTH 1 /* GP_INT */ +#define WM831X_ON_PIN_INT 0x1000 /* ON_PIN_INT */ +#define WM831X_ON_PIN_INT_MASK 0x1000 /* ON_PIN_INT */ +#define WM831X_ON_PIN_INT_SHIFT 12 /* ON_PIN_INT */ +#define WM831X_ON_PIN_INT_WIDTH 1 /* ON_PIN_INT */ +#define WM831X_WDOG_INT 0x0800 /* WDOG_INT */ +#define WM831X_WDOG_INT_MASK 0x0800 /* WDOG_INT */ +#define WM831X_WDOG_INT_SHIFT 11 /* WDOG_INT */ +#define WM831X_WDOG_INT_WIDTH 1 /* WDOG_INT */ +#define WM831X_TCHDATA_INT 0x0400 /* TCHDATA_INT */ +#define WM831X_TCHDATA_INT_MASK 0x0400 /* TCHDATA_INT */ +#define WM831X_TCHDATA_INT_SHIFT 10 /* TCHDATA_INT */ +#define WM831X_TCHDATA_INT_WIDTH 1 /* TCHDATA_INT */ +#define WM831X_TCHPD_INT 0x0200 /* TCHPD_INT */ +#define WM831X_TCHPD_INT_MASK 0x0200 /* TCHPD_INT */ +#define WM831X_TCHPD_INT_SHIFT 9 /* TCHPD_INT */ +#define WM831X_TCHPD_INT_WIDTH 1 /* TCHPD_INT */ +#define WM831X_AUXADC_INT 0x0100 /* AUXADC_INT */ +#define WM831X_AUXADC_INT_MASK 0x0100 /* AUXADC_INT */ +#define WM831X_AUXADC_INT_SHIFT 8 /* AUXADC_INT */ +#define WM831X_AUXADC_INT_WIDTH 1 /* AUXADC_INT */ +#define WM831X_PPM_INT 0x0080 /* PPM_INT */ +#define WM831X_PPM_INT_MASK 0x0080 /* PPM_INT */ +#define WM831X_PPM_INT_SHIFT 7 /* PPM_INT */ +#define WM831X_PPM_INT_WIDTH 1 /* PPM_INT */ +#define WM831X_CS_INT 0x0040 /* CS_INT */ +#define WM831X_CS_INT_MASK 0x0040 /* CS_INT */ +#define WM831X_CS_INT_SHIFT 6 /* CS_INT */ +#define WM831X_CS_INT_WIDTH 1 /* CS_INT */ +#define WM831X_RTC_INT 0x0020 /* RTC_INT */ +#define WM831X_RTC_INT_MASK 0x0020 /* RTC_INT */ +#define WM831X_RTC_INT_SHIFT 5 /* RTC_INT */ +#define WM831X_RTC_INT_WIDTH 1 /* RTC_INT */ +#define WM831X_OTP_INT 0x0010 /* OTP_INT */ +#define WM831X_OTP_INT_MASK 0x0010 /* OTP_INT */ +#define WM831X_OTP_INT_SHIFT 4 /* OTP_INT */ +#define WM831X_OTP_INT_WIDTH 1 /* OTP_INT */ +#define WM831X_CHILD_INT 0x0008 /* CHILD_INT */ +#define WM831X_CHILD_INT_MASK 0x0008 /* CHILD_INT */ +#define WM831X_CHILD_INT_SHIFT 3 /* CHILD_INT */ +#define WM831X_CHILD_INT_WIDTH 1 /* CHILD_INT */ +#define WM831X_CHG_INT 0x0004 /* CHG_INT */ +#define WM831X_CHG_INT_MASK 0x0004 /* CHG_INT */ +#define WM831X_CHG_INT_SHIFT 2 /* CHG_INT */ +#define WM831X_CHG_INT_WIDTH 1 /* CHG_INT */ +#define WM831X_HC_INT 0x0002 /* HC_INT */ +#define WM831X_HC_INT_MASK 0x0002 /* HC_INT */ +#define WM831X_HC_INT_SHIFT 1 /* HC_INT */ +#define WM831X_HC_INT_WIDTH 1 /* HC_INT */ +#define WM831X_UV_INT 0x0001 /* UV_INT */ +#define WM831X_UV_INT_MASK 0x0001 /* UV_INT */ +#define WM831X_UV_INT_SHIFT 0 /* UV_INT */ +#define WM831X_UV_INT_WIDTH 1 /* UV_INT */ + +/* + * R16401 (0x4011) - Interrupt Status 1 + */ +#define WM831X_PPM_SYSLO_EINT 0x8000 /* PPM_SYSLO_EINT */ +#define WM831X_PPM_SYSLO_EINT_MASK 0x8000 /* PPM_SYSLO_EINT */ +#define WM831X_PPM_SYSLO_EINT_SHIFT 15 /* PPM_SYSLO_EINT */ +#define WM831X_PPM_SYSLO_EINT_WIDTH 1 /* PPM_SYSLO_EINT */ +#define WM831X_PPM_PWR_SRC_EINT 0x4000 /* PPM_PWR_SRC_EINT */ +#define WM831X_PPM_PWR_SRC_EINT_MASK 0x4000 /* PPM_PWR_SRC_EINT */ +#define WM831X_PPM_PWR_SRC_EINT_SHIFT 14 /* PPM_PWR_SRC_EINT */ +#define WM831X_PPM_PWR_SRC_EINT_WIDTH 1 /* PPM_PWR_SRC_EINT */ +#define WM831X_PPM_USB_CURR_EINT 0x2000 /* PPM_USB_CURR_EINT */ +#define WM831X_PPM_USB_CURR_EINT_MASK 0x2000 /* PPM_USB_CURR_EINT */ +#define WM831X_PPM_USB_CURR_EINT_SHIFT 13 /* PPM_USB_CURR_EINT */ +#define WM831X_PPM_USB_CURR_EINT_WIDTH 1 /* PPM_USB_CURR_EINT */ +#define WM831X_ON_PIN_EINT 0x1000 /* ON_PIN_EINT */ +#define WM831X_ON_PIN_EINT_MASK 0x1000 /* ON_PIN_EINT */ +#define WM831X_ON_PIN_EINT_SHIFT 12 /* ON_PIN_EINT */ +#define WM831X_ON_PIN_EINT_WIDTH 1 /* ON_PIN_EINT */ +#define WM831X_WDOG_TO_EINT 0x0800 /* WDOG_TO_EINT */ +#define WM831X_WDOG_TO_EINT_MASK 0x0800 /* WDOG_TO_EINT */ +#define WM831X_WDOG_TO_EINT_SHIFT 11 /* WDOG_TO_EINT */ +#define WM831X_WDOG_TO_EINT_WIDTH 1 /* WDOG_TO_EINT */ +#define WM831X_TCHDATA_EINT 0x0400 /* TCHDATA_EINT */ +#define WM831X_TCHDATA_EINT_MASK 0x0400 /* TCHDATA_EINT */ +#define WM831X_TCHDATA_EINT_SHIFT 10 /* TCHDATA_EINT */ +#define WM831X_TCHDATA_EINT_WIDTH 1 /* TCHDATA_EINT */ +#define WM831X_TCHPD_EINT 0x0200 /* TCHPD_EINT */ +#define WM831X_TCHPD_EINT_MASK 0x0200 /* TCHPD_EINT */ +#define WM831X_TCHPD_EINT_SHIFT 9 /* TCHPD_EINT */ +#define WM831X_TCHPD_EINT_WIDTH 1 /* TCHPD_EINT */ +#define WM831X_AUXADC_DATA_EINT 0x0100 /* AUXADC_DATA_EINT */ +#define WM831X_AUXADC_DATA_EINT_MASK 0x0100 /* AUXADC_DATA_EINT */ +#define WM831X_AUXADC_DATA_EINT_SHIFT 8 /* AUXADC_DATA_EINT */ +#define WM831X_AUXADC_DATA_EINT_WIDTH 1 /* AUXADC_DATA_EINT */ +#define WM831X_AUXADC_DCOMP4_EINT 0x0080 /* AUXADC_DCOMP4_EINT */ +#define WM831X_AUXADC_DCOMP4_EINT_MASK 0x0080 /* AUXADC_DCOMP4_EINT */ +#define WM831X_AUXADC_DCOMP4_EINT_SHIFT 7 /* AUXADC_DCOMP4_EINT */ +#define WM831X_AUXADC_DCOMP4_EINT_WIDTH 1 /* AUXADC_DCOMP4_EINT */ +#define WM831X_AUXADC_DCOMP3_EINT 0x0040 /* AUXADC_DCOMP3_EINT */ +#define WM831X_AUXADC_DCOMP3_EINT_MASK 0x0040 /* AUXADC_DCOMP3_EINT */ +#define WM831X_AUXADC_DCOMP3_EINT_SHIFT 6 /* AUXADC_DCOMP3_EINT */ +#define WM831X_AUXADC_DCOMP3_EINT_WIDTH 1 /* AUXADC_DCOMP3_EINT */ +#define WM831X_AUXADC_DCOMP2_EINT 0x0020 /* AUXADC_DCOMP2_EINT */ +#define WM831X_AUXADC_DCOMP2_EINT_MASK 0x0020 /* AUXADC_DCOMP2_EINT */ +#define WM831X_AUXADC_DCOMP2_EINT_SHIFT 5 /* AUXADC_DCOMP2_EINT */ +#define WM831X_AUXADC_DCOMP2_EINT_WIDTH 1 /* AUXADC_DCOMP2_EINT */ +#define WM831X_AUXADC_DCOMP1_EINT 0x0010 /* AUXADC_DCOMP1_EINT */ +#define WM831X_AUXADC_DCOMP1_EINT_MASK 0x0010 /* AUXADC_DCOMP1_EINT */ +#define WM831X_AUXADC_DCOMP1_EINT_SHIFT 4 /* AUXADC_DCOMP1_EINT */ +#define WM831X_AUXADC_DCOMP1_EINT_WIDTH 1 /* AUXADC_DCOMP1_EINT */ +#define WM831X_RTC_PER_EINT 0x0008 /* RTC_PER_EINT */ +#define WM831X_RTC_PER_EINT_MASK 0x0008 /* RTC_PER_EINT */ +#define WM831X_RTC_PER_EINT_SHIFT 3 /* RTC_PER_EINT */ +#define WM831X_RTC_PER_EINT_WIDTH 1 /* RTC_PER_EINT */ +#define WM831X_RTC_ALM_EINT 0x0004 /* RTC_ALM_EINT */ +#define WM831X_RTC_ALM_EINT_MASK 0x0004 /* RTC_ALM_EINT */ +#define WM831X_RTC_ALM_EINT_SHIFT 2 /* RTC_ALM_EINT */ +#define WM831X_RTC_ALM_EINT_WIDTH 1 /* RTC_ALM_EINT */ +#define WM831X_TEMP_THW_EINT 0x0002 /* TEMP_THW_EINT */ +#define WM831X_TEMP_THW_EINT_MASK 0x0002 /* TEMP_THW_EINT */ +#define WM831X_TEMP_THW_EINT_SHIFT 1 /* TEMP_THW_EINT */ +#define WM831X_TEMP_THW_EINT_WIDTH 1 /* TEMP_THW_EINT */ + +/* + * R16402 (0x4012) - Interrupt Status 2 + */ +#define WM831X_CHG_BATT_HOT_EINT 0x8000 /* CHG_BATT_HOT_EINT */ +#define WM831X_CHG_BATT_HOT_EINT_MASK 0x8000 /* CHG_BATT_HOT_EINT */ +#define WM831X_CHG_BATT_HOT_EINT_SHIFT 15 /* CHG_BATT_HOT_EINT */ +#define WM831X_CHG_BATT_HOT_EINT_WIDTH 1 /* CHG_BATT_HOT_EINT */ +#define WM831X_CHG_BATT_COLD_EINT 0x4000 /* CHG_BATT_COLD_EINT */ +#define WM831X_CHG_BATT_COLD_EINT_MASK 0x4000 /* CHG_BATT_COLD_EINT */ +#define WM831X_CHG_BATT_COLD_EINT_SHIFT 14 /* CHG_BATT_COLD_EINT */ +#define WM831X_CHG_BATT_COLD_EINT_WIDTH 1 /* CHG_BATT_COLD_EINT */ +#define WM831X_CHG_BATT_FAIL_EINT 0x2000 /* CHG_BATT_FAIL_EINT */ +#define WM831X_CHG_BATT_FAIL_EINT_MASK 0x2000 /* CHG_BATT_FAIL_EINT */ +#define WM831X_CHG_BATT_FAIL_EINT_SHIFT 13 /* CHG_BATT_FAIL_EINT */ +#define WM831X_CHG_BATT_FAIL_EINT_WIDTH 1 /* CHG_BATT_FAIL_EINT */ +#define WM831X_CHG_OV_EINT 0x1000 /* CHG_OV_EINT */ +#define WM831X_CHG_OV_EINT_MASK 0x1000 /* CHG_OV_EINT */ +#define WM831X_CHG_OV_EINT_SHIFT 12 /* CHG_OV_EINT */ +#define WM831X_CHG_OV_EINT_WIDTH 1 /* CHG_OV_EINT */ +#define WM831X_CHG_END_EINT 0x0800 /* CHG_END_EINT */ +#define WM831X_CHG_END_EINT_MASK 0x0800 /* CHG_END_EINT */ +#define WM831X_CHG_END_EINT_SHIFT 11 /* CHG_END_EINT */ +#define WM831X_CHG_END_EINT_WIDTH 1 /* CHG_END_EINT */ +#define WM831X_CHG_TO_EINT 0x0400 /* CHG_TO_EINT */ +#define WM831X_CHG_TO_EINT_MASK 0x0400 /* CHG_TO_EINT */ +#define WM831X_CHG_TO_EINT_SHIFT 10 /* CHG_TO_EINT */ +#define WM831X_CHG_TO_EINT_WIDTH 1 /* CHG_TO_EINT */ +#define WM831X_CHG_MODE_EINT 0x0200 /* CHG_MODE_EINT */ +#define WM831X_CHG_MODE_EINT_MASK 0x0200 /* CHG_MODE_EINT */ +#define WM831X_CHG_MODE_EINT_SHIFT 9 /* CHG_MODE_EINT */ +#define WM831X_CHG_MODE_EINT_WIDTH 1 /* CHG_MODE_EINT */ +#define WM831X_CHG_START_EINT 0x0100 /* CHG_START_EINT */ +#define WM831X_CHG_START_EINT_MASK 0x0100 /* CHG_START_EINT */ +#define WM831X_CHG_START_EINT_SHIFT 8 /* CHG_START_EINT */ +#define WM831X_CHG_START_EINT_WIDTH 1 /* CHG_START_EINT */ +#define WM831X_CS2_EINT 0x0080 /* CS2_EINT */ +#define WM831X_CS2_EINT_MASK 0x0080 /* CS2_EINT */ +#define WM831X_CS2_EINT_SHIFT 7 /* CS2_EINT */ +#define WM831X_CS2_EINT_WIDTH 1 /* CS2_EINT */ +#define WM831X_CS1_EINT 0x0040 /* CS1_EINT */ +#define WM831X_CS1_EINT_MASK 0x0040 /* CS1_EINT */ +#define WM831X_CS1_EINT_SHIFT 6 /* CS1_EINT */ +#define WM831X_CS1_EINT_WIDTH 1 /* CS1_EINT */ +#define WM831X_OTP_CMD_END_EINT 0x0020 /* OTP_CMD_END_EINT */ +#define WM831X_OTP_CMD_END_EINT_MASK 0x0020 /* OTP_CMD_END_EINT */ +#define WM831X_OTP_CMD_END_EINT_SHIFT 5 /* OTP_CMD_END_EINT */ +#define WM831X_OTP_CMD_END_EINT_WIDTH 1 /* OTP_CMD_END_EINT */ +#define WM831X_OTP_ERR_EINT 0x0010 /* OTP_ERR_EINT */ +#define WM831X_OTP_ERR_EINT_MASK 0x0010 /* OTP_ERR_EINT */ +#define WM831X_OTP_ERR_EINT_SHIFT 4 /* OTP_ERR_EINT */ +#define WM831X_OTP_ERR_EINT_WIDTH 1 /* OTP_ERR_EINT */ +#define WM831X_PS_POR_EINT 0x0004 /* PS_POR_EINT */ +#define WM831X_PS_POR_EINT_MASK 0x0004 /* PS_POR_EINT */ +#define WM831X_PS_POR_EINT_SHIFT 2 /* PS_POR_EINT */ +#define WM831X_PS_POR_EINT_WIDTH 1 /* PS_POR_EINT */ +#define WM831X_PS_SLEEP_OFF_EINT 0x0002 /* PS_SLEEP_OFF_EINT */ +#define WM831X_PS_SLEEP_OFF_EINT_MASK 0x0002 /* PS_SLEEP_OFF_EINT */ +#define WM831X_PS_SLEEP_OFF_EINT_SHIFT 1 /* PS_SLEEP_OFF_EINT */ +#define WM831X_PS_SLEEP_OFF_EINT_WIDTH 1 /* PS_SLEEP_OFF_EINT */ +#define WM831X_PS_ON_WAKE_EINT 0x0001 /* PS_ON_WAKE_EINT */ +#define WM831X_PS_ON_WAKE_EINT_MASK 0x0001 /* PS_ON_WAKE_EINT */ +#define WM831X_PS_ON_WAKE_EINT_SHIFT 0 /* PS_ON_WAKE_EINT */ +#define WM831X_PS_ON_WAKE_EINT_WIDTH 1 /* PS_ON_WAKE_EINT */ + +/* + * R16403 (0x4013) - Interrupt Status 3 + */ +#define WM831X_UV_LDO10_EINT 0x0200 /* UV_LDO10_EINT */ +#define WM831X_UV_LDO10_EINT_MASK 0x0200 /* UV_LDO10_EINT */ +#define WM831X_UV_LDO10_EINT_SHIFT 9 /* UV_LDO10_EINT */ +#define WM831X_UV_LDO10_EINT_WIDTH 1 /* UV_LDO10_EINT */ +#define WM831X_UV_LDO9_EINT 0x0100 /* UV_LDO9_EINT */ +#define WM831X_UV_LDO9_EINT_MASK 0x0100 /* UV_LDO9_EINT */ +#define WM831X_UV_LDO9_EINT_SHIFT 8 /* UV_LDO9_EINT */ +#define WM831X_UV_LDO9_EINT_WIDTH 1 /* UV_LDO9_EINT */ +#define WM831X_UV_LDO8_EINT 0x0080 /* UV_LDO8_EINT */ +#define WM831X_UV_LDO8_EINT_MASK 0x0080 /* UV_LDO8_EINT */ +#define WM831X_UV_LDO8_EINT_SHIFT 7 /* UV_LDO8_EINT */ +#define WM831X_UV_LDO8_EINT_WIDTH 1 /* UV_LDO8_EINT */ +#define WM831X_UV_LDO7_EINT 0x0040 /* UV_LDO7_EINT */ +#define WM831X_UV_LDO7_EINT_MASK 0x0040 /* UV_LDO7_EINT */ +#define WM831X_UV_LDO7_EINT_SHIFT 6 /* UV_LDO7_EINT */ +#define WM831X_UV_LDO7_EINT_WIDTH 1 /* UV_LDO7_EINT */ +#define WM831X_UV_LDO6_EINT 0x0020 /* UV_LDO6_EINT */ +#define WM831X_UV_LDO6_EINT_MASK 0x0020 /* UV_LDO6_EINT */ +#define WM831X_UV_LDO6_EINT_SHIFT 5 /* UV_LDO6_EINT */ +#define WM831X_UV_LDO6_EINT_WIDTH 1 /* UV_LDO6_EINT */ +#define WM831X_UV_LDO5_EINT 0x0010 /* UV_LDO5_EINT */ +#define WM831X_UV_LDO5_EINT_MASK 0x0010 /* UV_LDO5_EINT */ +#define WM831X_UV_LDO5_EINT_SHIFT 4 /* UV_LDO5_EINT */ +#define WM831X_UV_LDO5_EINT_WIDTH 1 /* UV_LDO5_EINT */ +#define WM831X_UV_LDO4_EINT 0x0008 /* UV_LDO4_EINT */ +#define WM831X_UV_LDO4_EINT_MASK 0x0008 /* UV_LDO4_EINT */ +#define WM831X_UV_LDO4_EINT_SHIFT 3 /* UV_LDO4_EINT */ +#define WM831X_UV_LDO4_EINT_WIDTH 1 /* UV_LDO4_EINT */ +#define WM831X_UV_LDO3_EINT 0x0004 /* UV_LDO3_EINT */ +#define WM831X_UV_LDO3_EINT_MASK 0x0004 /* UV_LDO3_EINT */ +#define WM831X_UV_LDO3_EINT_SHIFT 2 /* UV_LDO3_EINT */ +#define WM831X_UV_LDO3_EINT_WIDTH 1 /* UV_LDO3_EINT */ +#define WM831X_UV_LDO2_EINT 0x0002 /* UV_LDO2_EINT */ +#define WM831X_UV_LDO2_EINT_MASK 0x0002 /* UV_LDO2_EINT */ +#define WM831X_UV_LDO2_EINT_SHIFT 1 /* UV_LDO2_EINT */ +#define WM831X_UV_LDO2_EINT_WIDTH 1 /* UV_LDO2_EINT */ +#define WM831X_UV_LDO1_EINT 0x0001 /* UV_LDO1_EINT */ +#define WM831X_UV_LDO1_EINT_MASK 0x0001 /* UV_LDO1_EINT */ +#define WM831X_UV_LDO1_EINT_SHIFT 0 /* UV_LDO1_EINT */ +#define WM831X_UV_LDO1_EINT_WIDTH 1 /* UV_LDO1_EINT */ + +/* + * R16404 (0x4014) - Interrupt Status 4 + */ +#define WM831X_HC_DC2_EINT 0x0200 /* HC_DC2_EINT */ +#define WM831X_HC_DC2_EINT_MASK 0x0200 /* HC_DC2_EINT */ +#define WM831X_HC_DC2_EINT_SHIFT 9 /* HC_DC2_EINT */ +#define WM831X_HC_DC2_EINT_WIDTH 1 /* HC_DC2_EINT */ +#define WM831X_HC_DC1_EINT 0x0100 /* HC_DC1_EINT */ +#define WM831X_HC_DC1_EINT_MASK 0x0100 /* HC_DC1_EINT */ +#define WM831X_HC_DC1_EINT_SHIFT 8 /* HC_DC1_EINT */ +#define WM831X_HC_DC1_EINT_WIDTH 1 /* HC_DC1_EINT */ +#define WM831X_UV_DC4_EINT 0x0008 /* UV_DC4_EINT */ +#define WM831X_UV_DC4_EINT_MASK 0x0008 /* UV_DC4_EINT */ +#define WM831X_UV_DC4_EINT_SHIFT 3 /* UV_DC4_EINT */ +#define WM831X_UV_DC4_EINT_WIDTH 1 /* UV_DC4_EINT */ +#define WM831X_UV_DC3_EINT 0x0004 /* UV_DC3_EINT */ +#define WM831X_UV_DC3_EINT_MASK 0x0004 /* UV_DC3_EINT */ +#define WM831X_UV_DC3_EINT_SHIFT 2 /* UV_DC3_EINT */ +#define WM831X_UV_DC3_EINT_WIDTH 1 /* UV_DC3_EINT */ +#define WM831X_UV_DC2_EINT 0x0002 /* UV_DC2_EINT */ +#define WM831X_UV_DC2_EINT_MASK 0x0002 /* UV_DC2_EINT */ +#define WM831X_UV_DC2_EINT_SHIFT 1 /* UV_DC2_EINT */ +#define WM831X_UV_DC2_EINT_WIDTH 1 /* UV_DC2_EINT */ +#define WM831X_UV_DC1_EINT 0x0001 /* UV_DC1_EINT */ +#define WM831X_UV_DC1_EINT_MASK 0x0001 /* UV_DC1_EINT */ +#define WM831X_UV_DC1_EINT_SHIFT 0 /* UV_DC1_EINT */ +#define WM831X_UV_DC1_EINT_WIDTH 1 /* UV_DC1_EINT */ + +/* + * R16405 (0x4015) - Interrupt Status 5 + */ +#define WM831X_GP16_EINT 0x8000 /* GP16_EINT */ +#define WM831X_GP16_EINT_MASK 0x8000 /* GP16_EINT */ +#define WM831X_GP16_EINT_SHIFT 15 /* GP16_EINT */ +#define WM831X_GP16_EINT_WIDTH 1 /* GP16_EINT */ +#define WM831X_GP15_EINT 0x4000 /* GP15_EINT */ +#define WM831X_GP15_EINT_MASK 0x4000 /* GP15_EINT */ +#define WM831X_GP15_EINT_SHIFT 14 /* GP15_EINT */ +#define WM831X_GP15_EINT_WIDTH 1 /* GP15_EINT */ +#define WM831X_GP14_EINT 0x2000 /* GP14_EINT */ +#define WM831X_GP14_EINT_MASK 0x2000 /* GP14_EINT */ +#define WM831X_GP14_EINT_SHIFT 13 /* GP14_EINT */ +#define WM831X_GP14_EINT_WIDTH 1 /* GP14_EINT */ +#define WM831X_GP13_EINT 0x1000 /* GP13_EINT */ +#define WM831X_GP13_EINT_MASK 0x1000 /* GP13_EINT */ +#define WM831X_GP13_EINT_SHIFT 12 /* GP13_EINT */ +#define WM831X_GP13_EINT_WIDTH 1 /* GP13_EINT */ +#define WM831X_GP12_EINT 0x0800 /* GP12_EINT */ +#define WM831X_GP12_EINT_MASK 0x0800 /* GP12_EINT */ +#define WM831X_GP12_EINT_SHIFT 11 /* GP12_EINT */ +#define WM831X_GP12_EINT_WIDTH 1 /* GP12_EINT */ +#define WM831X_GP11_EINT 0x0400 /* GP11_EINT */ +#define WM831X_GP11_EINT_MASK 0x0400 /* GP11_EINT */ +#define WM831X_GP11_EINT_SHIFT 10 /* GP11_EINT */ +#define WM831X_GP11_EINT_WIDTH 1 /* GP11_EINT */ +#define WM831X_GP10_EINT 0x0200 /* GP10_EINT */ +#define WM831X_GP10_EINT_MASK 0x0200 /* GP10_EINT */ +#define WM831X_GP10_EINT_SHIFT 9 /* GP10_EINT */ +#define WM831X_GP10_EINT_WIDTH 1 /* GP10_EINT */ +#define WM831X_GP9_EINT 0x0100 /* GP9_EINT */ +#define WM831X_GP9_EINT_MASK 0x0100 /* GP9_EINT */ +#define WM831X_GP9_EINT_SHIFT 8 /* GP9_EINT */ +#define WM831X_GP9_EINT_WIDTH 1 /* GP9_EINT */ +#define WM831X_GP8_EINT 0x0080 /* GP8_EINT */ +#define WM831X_GP8_EINT_MASK 0x0080 /* GP8_EINT */ +#define WM831X_GP8_EINT_SHIFT 7 /* GP8_EINT */ +#define WM831X_GP8_EINT_WIDTH 1 /* GP8_EINT */ +#define WM831X_GP7_EINT 0x0040 /* GP7_EINT */ +#define WM831X_GP7_EINT_MASK 0x0040 /* GP7_EINT */ +#define WM831X_GP7_EINT_SHIFT 6 /* GP7_EINT */ +#define WM831X_GP7_EINT_WIDTH 1 /* GP7_EINT */ +#define WM831X_GP6_EINT 0x0020 /* GP6_EINT */ +#define WM831X_GP6_EINT_MASK 0x0020 /* GP6_EINT */ +#define WM831X_GP6_EINT_SHIFT 5 /* GP6_EINT */ +#define WM831X_GP6_EINT_WIDTH 1 /* GP6_EINT */ +#define WM831X_GP5_EINT 0x0010 /* GP5_EINT */ +#define WM831X_GP5_EINT_MASK 0x0010 /* GP5_EINT */ +#define WM831X_GP5_EINT_SHIFT 4 /* GP5_EINT */ +#define WM831X_GP5_EINT_WIDTH 1 /* GP5_EINT */ +#define WM831X_GP4_EINT 0x0008 /* GP4_EINT */ +#define WM831X_GP4_EINT_MASK 0x0008 /* GP4_EINT */ +#define WM831X_GP4_EINT_SHIFT 3 /* GP4_EINT */ +#define WM831X_GP4_EINT_WIDTH 1 /* GP4_EINT */ +#define WM831X_GP3_EINT 0x0004 /* GP3_EINT */ +#define WM831X_GP3_EINT_MASK 0x0004 /* GP3_EINT */ +#define WM831X_GP3_EINT_SHIFT 2 /* GP3_EINT */ +#define WM831X_GP3_EINT_WIDTH 1 /* GP3_EINT */ +#define WM831X_GP2_EINT 0x0002 /* GP2_EINT */ +#define WM831X_GP2_EINT_MASK 0x0002 /* GP2_EINT */ +#define WM831X_GP2_EINT_SHIFT 1 /* GP2_EINT */ +#define WM831X_GP2_EINT_WIDTH 1 /* GP2_EINT */ +#define WM831X_GP1_EINT 0x0001 /* GP1_EINT */ +#define WM831X_GP1_EINT_MASK 0x0001 /* GP1_EINT */ +#define WM831X_GP1_EINT_SHIFT 0 /* GP1_EINT */ +#define WM831X_GP1_EINT_WIDTH 1 /* GP1_EINT */ + +/* + * R16407 (0x4017) - IRQ Config + */ +#define WM831X_IRQ_OD 0x0002 /* IRQ_OD */ +#define WM831X_IRQ_OD_MASK 0x0002 /* IRQ_OD */ +#define WM831X_IRQ_OD_SHIFT 1 /* IRQ_OD */ +#define WM831X_IRQ_OD_WIDTH 1 /* IRQ_OD */ +#define WM831X_IM_IRQ 0x0001 /* IM_IRQ */ +#define WM831X_IM_IRQ_MASK 0x0001 /* IM_IRQ */ +#define WM831X_IM_IRQ_SHIFT 0 /* IM_IRQ */ +#define WM831X_IM_IRQ_WIDTH 1 /* IM_IRQ */ + +/* + * R16408 (0x4018) - System Interrupts Mask + */ +#define WM831X_IM_PS_INT 0x8000 /* IM_PS_INT */ +#define WM831X_IM_PS_INT_MASK 0x8000 /* IM_PS_INT */ +#define WM831X_IM_PS_INT_SHIFT 15 /* IM_PS_INT */ +#define WM831X_IM_PS_INT_WIDTH 1 /* IM_PS_INT */ +#define WM831X_IM_TEMP_INT 0x4000 /* IM_TEMP_INT */ +#define WM831X_IM_TEMP_INT_MASK 0x4000 /* IM_TEMP_INT */ +#define WM831X_IM_TEMP_INT_SHIFT 14 /* IM_TEMP_INT */ +#define WM831X_IM_TEMP_INT_WIDTH 1 /* IM_TEMP_INT */ +#define WM831X_IM_GP_INT 0x2000 /* IM_GP_INT */ +#define WM831X_IM_GP_INT_MASK 0x2000 /* IM_GP_INT */ +#define WM831X_IM_GP_INT_SHIFT 13 /* IM_GP_INT */ +#define WM831X_IM_GP_INT_WIDTH 1 /* IM_GP_INT */ +#define WM831X_IM_ON_PIN_INT 0x1000 /* IM_ON_PIN_INT */ +#define WM831X_IM_ON_PIN_INT_MASK 0x1000 /* IM_ON_PIN_INT */ +#define WM831X_IM_ON_PIN_INT_SHIFT 12 /* IM_ON_PIN_INT */ +#define WM831X_IM_ON_PIN_INT_WIDTH 1 /* IM_ON_PIN_INT */ +#define WM831X_IM_WDOG_INT 0x0800 /* IM_WDOG_INT */ +#define WM831X_IM_WDOG_INT_MASK 0x0800 /* IM_WDOG_INT */ +#define WM831X_IM_WDOG_INT_SHIFT 11 /* IM_WDOG_INT */ +#define WM831X_IM_WDOG_INT_WIDTH 1 /* IM_WDOG_INT */ +#define WM831X_IM_TCHDATA_INT 0x0400 /* IM_TCHDATA_INT */ +#define WM831X_IM_TCHDATA_INT_MASK 0x0400 /* IM_TCHDATA_INT */ +#define WM831X_IM_TCHDATA_INT_SHIFT 10 /* IM_TCHDATA_INT */ +#define WM831X_IM_TCHDATA_INT_WIDTH 1 /* IM_TCHDATA_INT */ +#define WM831X_IM_TCHPD_INT 0x0200 /* IM_TCHPD_INT */ +#define WM831X_IM_TCHPD_INT_MASK 0x0200 /* IM_TCHPD_INT */ +#define WM831X_IM_TCHPD_INT_SHIFT 9 /* IM_TCHPD_INT */ +#define WM831X_IM_TCHPD_INT_WIDTH 1 /* IM_TCHPD_INT */ +#define WM831X_IM_AUXADC_INT 0x0100 /* IM_AUXADC_INT */ +#define WM831X_IM_AUXADC_INT_MASK 0x0100 /* IM_AUXADC_INT */ +#define WM831X_IM_AUXADC_INT_SHIFT 8 /* IM_AUXADC_INT */ +#define WM831X_IM_AUXADC_INT_WIDTH 1 /* IM_AUXADC_INT */ +#define WM831X_IM_PPM_INT 0x0080 /* IM_PPM_INT */ +#define WM831X_IM_PPM_INT_MASK 0x0080 /* IM_PPM_INT */ +#define WM831X_IM_PPM_INT_SHIFT 7 /* IM_PPM_INT */ +#define WM831X_IM_PPM_INT_WIDTH 1 /* IM_PPM_INT */ +#define WM831X_IM_CS_INT 0x0040 /* IM_CS_INT */ +#define WM831X_IM_CS_INT_MASK 0x0040 /* IM_CS_INT */ +#define WM831X_IM_CS_INT_SHIFT 6 /* IM_CS_INT */ +#define WM831X_IM_CS_INT_WIDTH 1 /* IM_CS_INT */ +#define WM831X_IM_RTC_INT 0x0020 /* IM_RTC_INT */ +#define WM831X_IM_RTC_INT_MASK 0x0020 /* IM_RTC_INT */ +#define WM831X_IM_RTC_INT_SHIFT 5 /* IM_RTC_INT */ +#define WM831X_IM_RTC_INT_WIDTH 1 /* IM_RTC_INT */ +#define WM831X_IM_OTP_INT 0x0010 /* IM_OTP_INT */ +#define WM831X_IM_OTP_INT_MASK 0x0010 /* IM_OTP_INT */ +#define WM831X_IM_OTP_INT_SHIFT 4 /* IM_OTP_INT */ +#define WM831X_IM_OTP_INT_WIDTH 1 /* IM_OTP_INT */ +#define WM831X_IM_CHILD_INT 0x0008 /* IM_CHILD_INT */ +#define WM831X_IM_CHILD_INT_MASK 0x0008 /* IM_CHILD_INT */ +#define WM831X_IM_CHILD_INT_SHIFT 3 /* IM_CHILD_INT */ +#define WM831X_IM_CHILD_INT_WIDTH 1 /* IM_CHILD_INT */ +#define WM831X_IM_CHG_INT 0x0004 /* IM_CHG_INT */ +#define WM831X_IM_CHG_INT_MASK 0x0004 /* IM_CHG_INT */ +#define WM831X_IM_CHG_INT_SHIFT 2 /* IM_CHG_INT */ +#define WM831X_IM_CHG_INT_WIDTH 1 /* IM_CHG_INT */ +#define WM831X_IM_HC_INT 0x0002 /* IM_HC_INT */ +#define WM831X_IM_HC_INT_MASK 0x0002 /* IM_HC_INT */ +#define WM831X_IM_HC_INT_SHIFT 1 /* IM_HC_INT */ +#define WM831X_IM_HC_INT_WIDTH 1 /* IM_HC_INT */ +#define WM831X_IM_UV_INT 0x0001 /* IM_UV_INT */ +#define WM831X_IM_UV_INT_MASK 0x0001 /* IM_UV_INT */ +#define WM831X_IM_UV_INT_SHIFT 0 /* IM_UV_INT */ +#define WM831X_IM_UV_INT_WIDTH 1 /* IM_UV_INT */ + +/* + * R16409 (0x4019) - Interrupt Status 1 Mask + */ +#define WM831X_IM_PPM_SYSLO_EINT 0x8000 /* IM_PPM_SYSLO_EINT */ +#define WM831X_IM_PPM_SYSLO_EINT_MASK 0x8000 /* IM_PPM_SYSLO_EINT */ +#define WM831X_IM_PPM_SYSLO_EINT_SHIFT 15 /* IM_PPM_SYSLO_EINT */ +#define WM831X_IM_PPM_SYSLO_EINT_WIDTH 1 /* IM_PPM_SYSLO_EINT */ +#define WM831X_IM_PPM_PWR_SRC_EINT 0x4000 /* IM_PPM_PWR_SRC_EINT */ +#define WM831X_IM_PPM_PWR_SRC_EINT_MASK 0x4000 /* IM_PPM_PWR_SRC_EINT */ +#define WM831X_IM_PPM_PWR_SRC_EINT_SHIFT 14 /* IM_PPM_PWR_SRC_EINT */ +#define WM831X_IM_PPM_PWR_SRC_EINT_WIDTH 1 /* IM_PPM_PWR_SRC_EINT */ +#define WM831X_IM_PPM_USB_CURR_EINT 0x2000 /* IM_PPM_USB_CURR_EINT */ +#define WM831X_IM_PPM_USB_CURR_EINT_MASK 0x2000 /* IM_PPM_USB_CURR_EINT */ +#define WM831X_IM_PPM_USB_CURR_EINT_SHIFT 13 /* IM_PPM_USB_CURR_EINT */ +#define WM831X_IM_PPM_USB_CURR_EINT_WIDTH 1 /* IM_PPM_USB_CURR_EINT */ +#define WM831X_IM_ON_PIN_EINT 0x1000 /* IM_ON_PIN_EINT */ +#define WM831X_IM_ON_PIN_EINT_MASK 0x1000 /* IM_ON_PIN_EINT */ +#define WM831X_IM_ON_PIN_EINT_SHIFT 12 /* IM_ON_PIN_EINT */ +#define WM831X_IM_ON_PIN_EINT_WIDTH 1 /* IM_ON_PIN_EINT */ +#define WM831X_IM_WDOG_TO_EINT 0x0800 /* IM_WDOG_TO_EINT */ +#define WM831X_IM_WDOG_TO_EINT_MASK 0x0800 /* IM_WDOG_TO_EINT */ +#define WM831X_IM_WDOG_TO_EINT_SHIFT 11 /* IM_WDOG_TO_EINT */ +#define WM831X_IM_WDOG_TO_EINT_WIDTH 1 /* IM_WDOG_TO_EINT */ +#define WM831X_IM_TCHDATA_EINT 0x0400 /* IM_TCHDATA_EINT */ +#define WM831X_IM_TCHDATA_EINT_MASK 0x0400 /* IM_TCHDATA_EINT */ +#define WM831X_IM_TCHDATA_EINT_SHIFT 10 /* IM_TCHDATA_EINT */ +#define WM831X_IM_TCHDATA_EINT_WIDTH 1 /* IM_TCHDATA_EINT */ +#define WM831X_IM_TCHPD_EINT 0x0200 /* IM_TCHPD_EINT */ +#define WM831X_IM_TCHPD_EINT_MASK 0x0200 /* IM_TCHPD_EINT */ +#define WM831X_IM_TCHPD_EINT_SHIFT 9 /* IM_TCHPD_EINT */ +#define WM831X_IM_TCHPD_EINT_WIDTH 1 /* IM_TCHPD_EINT */ +#define WM831X_IM_AUXADC_DATA_EINT 0x0100 /* IM_AUXADC_DATA_EINT */ +#define WM831X_IM_AUXADC_DATA_EINT_MASK 0x0100 /* IM_AUXADC_DATA_EINT */ +#define WM831X_IM_AUXADC_DATA_EINT_SHIFT 8 /* IM_AUXADC_DATA_EINT */ +#define WM831X_IM_AUXADC_DATA_EINT_WIDTH 1 /* IM_AUXADC_DATA_EINT */ +#define WM831X_IM_AUXADC_DCOMP4_EINT 0x0080 /* IM_AUXADC_DCOMP4_EINT */ +#define WM831X_IM_AUXADC_DCOMP4_EINT_MASK 0x0080 /* IM_AUXADC_DCOMP4_EINT */ +#define WM831X_IM_AUXADC_DCOMP4_EINT_SHIFT 7 /* IM_AUXADC_DCOMP4_EINT */ +#define WM831X_IM_AUXADC_DCOMP4_EINT_WIDTH 1 /* IM_AUXADC_DCOMP4_EINT */ +#define WM831X_IM_AUXADC_DCOMP3_EINT 0x0040 /* IM_AUXADC_DCOMP3_EINT */ +#define WM831X_IM_AUXADC_DCOMP3_EINT_MASK 0x0040 /* IM_AUXADC_DCOMP3_EINT */ +#define WM831X_IM_AUXADC_DCOMP3_EINT_SHIFT 6 /* IM_AUXADC_DCOMP3_EINT */ +#define WM831X_IM_AUXADC_DCOMP3_EINT_WIDTH 1 /* IM_AUXADC_DCOMP3_EINT */ +#define WM831X_IM_AUXADC_DCOMP2_EINT 0x0020 /* IM_AUXADC_DCOMP2_EINT */ +#define WM831X_IM_AUXADC_DCOMP2_EINT_MASK 0x0020 /* IM_AUXADC_DCOMP2_EINT */ +#define WM831X_IM_AUXADC_DCOMP2_EINT_SHIFT 5 /* IM_AUXADC_DCOMP2_EINT */ +#define WM831X_IM_AUXADC_DCOMP2_EINT_WIDTH 1 /* IM_AUXADC_DCOMP2_EINT */ +#define WM831X_IM_AUXADC_DCOMP1_EINT 0x0010 /* IM_AUXADC_DCOMP1_EINT */ +#define WM831X_IM_AUXADC_DCOMP1_EINT_MASK 0x0010 /* IM_AUXADC_DCOMP1_EINT */ +#define WM831X_IM_AUXADC_DCOMP1_EINT_SHIFT 4 /* IM_AUXADC_DCOMP1_EINT */ +#define WM831X_IM_AUXADC_DCOMP1_EINT_WIDTH 1 /* IM_AUXADC_DCOMP1_EINT */ +#define WM831X_IM_RTC_PER_EINT 0x0008 /* IM_RTC_PER_EINT */ +#define WM831X_IM_RTC_PER_EINT_MASK 0x0008 /* IM_RTC_PER_EINT */ +#define WM831X_IM_RTC_PER_EINT_SHIFT 3 /* IM_RTC_PER_EINT */ +#define WM831X_IM_RTC_PER_EINT_WIDTH 1 /* IM_RTC_PER_EINT */ +#define WM831X_IM_RTC_ALM_EINT 0x0004 /* IM_RTC_ALM_EINT */ +#define WM831X_IM_RTC_ALM_EINT_MASK 0x0004 /* IM_RTC_ALM_EINT */ +#define WM831X_IM_RTC_ALM_EINT_SHIFT 2 /* IM_RTC_ALM_EINT */ +#define WM831X_IM_RTC_ALM_EINT_WIDTH 1 /* IM_RTC_ALM_EINT */ +#define WM831X_IM_TEMP_THW_EINT 0x0002 /* IM_TEMP_THW_EINT */ +#define WM831X_IM_TEMP_THW_EINT_MASK 0x0002 /* IM_TEMP_THW_EINT */ +#define WM831X_IM_TEMP_THW_EINT_SHIFT 1 /* IM_TEMP_THW_EINT */ +#define WM831X_IM_TEMP_THW_EINT_WIDTH 1 /* IM_TEMP_THW_EINT */ + +/* + * R16410 (0x401A) - Interrupt Status 2 Mask + */ +#define WM831X_IM_CHG_BATT_HOT_EINT 0x8000 /* IM_CHG_BATT_HOT_EINT */ +#define WM831X_IM_CHG_BATT_HOT_EINT_MASK 0x8000 /* IM_CHG_BATT_HOT_EINT */ +#define WM831X_IM_CHG_BATT_HOT_EINT_SHIFT 15 /* IM_CHG_BATT_HOT_EINT */ +#define WM831X_IM_CHG_BATT_HOT_EINT_WIDTH 1 /* IM_CHG_BATT_HOT_EINT */ +#define WM831X_IM_CHG_BATT_COLD_EINT 0x4000 /* IM_CHG_BATT_COLD_EINT */ +#define WM831X_IM_CHG_BATT_COLD_EINT_MASK 0x4000 /* IM_CHG_BATT_COLD_EINT */ +#define WM831X_IM_CHG_BATT_COLD_EINT_SHIFT 14 /* IM_CHG_BATT_COLD_EINT */ +#define WM831X_IM_CHG_BATT_COLD_EINT_WIDTH 1 /* IM_CHG_BATT_COLD_EINT */ +#define WM831X_IM_CHG_BATT_FAIL_EINT 0x2000 /* IM_CHG_BATT_FAIL_EINT */ +#define WM831X_IM_CHG_BATT_FAIL_EINT_MASK 0x2000 /* IM_CHG_BATT_FAIL_EINT */ +#define WM831X_IM_CHG_BATT_FAIL_EINT_SHIFT 13 /* IM_CHG_BATT_FAIL_EINT */ +#define WM831X_IM_CHG_BATT_FAIL_EINT_WIDTH 1 /* IM_CHG_BATT_FAIL_EINT */ +#define WM831X_IM_CHG_OV_EINT 0x1000 /* IM_CHG_OV_EINT */ +#define WM831X_IM_CHG_OV_EINT_MASK 0x1000 /* IM_CHG_OV_EINT */ +#define WM831X_IM_CHG_OV_EINT_SHIFT 12 /* IM_CHG_OV_EINT */ +#define WM831X_IM_CHG_OV_EINT_WIDTH 1 /* IM_CHG_OV_EINT */ +#define WM831X_IM_CHG_END_EINT 0x0800 /* IM_CHG_END_EINT */ +#define WM831X_IM_CHG_END_EINT_MASK 0x0800 /* IM_CHG_END_EINT */ +#define WM831X_IM_CHG_END_EINT_SHIFT 11 /* IM_CHG_END_EINT */ +#define WM831X_IM_CHG_END_EINT_WIDTH 1 /* IM_CHG_END_EINT */ +#define WM831X_IM_CHG_TO_EINT 0x0400 /* IM_CHG_TO_EINT */ +#define WM831X_IM_CHG_TO_EINT_MASK 0x0400 /* IM_CHG_TO_EINT */ +#define WM831X_IM_CHG_TO_EINT_SHIFT 10 /* IM_CHG_TO_EINT */ +#define WM831X_IM_CHG_TO_EINT_WIDTH 1 /* IM_CHG_TO_EINT */ +#define WM831X_IM_CHG_MODE_EINT 0x0200 /* IM_CHG_MODE_EINT */ +#define WM831X_IM_CHG_MODE_EINT_MASK 0x0200 /* IM_CHG_MODE_EINT */ +#define WM831X_IM_CHG_MODE_EINT_SHIFT 9 /* IM_CHG_MODE_EINT */ +#define WM831X_IM_CHG_MODE_EINT_WIDTH 1 /* IM_CHG_MODE_EINT */ +#define WM831X_IM_CHG_START_EINT 0x0100 /* IM_CHG_START_EINT */ +#define WM831X_IM_CHG_START_EINT_MASK 0x0100 /* IM_CHG_START_EINT */ +#define WM831X_IM_CHG_START_EINT_SHIFT 8 /* IM_CHG_START_EINT */ +#define WM831X_IM_CHG_START_EINT_WIDTH 1 /* IM_CHG_START_EINT */ +#define WM831X_IM_CS2_EINT 0x0080 /* IM_CS2_EINT */ +#define WM831X_IM_CS2_EINT_MASK 0x0080 /* IM_CS2_EINT */ +#define WM831X_IM_CS2_EINT_SHIFT 7 /* IM_CS2_EINT */ +#define WM831X_IM_CS2_EINT_WIDTH 1 /* IM_CS2_EINT */ +#define WM831X_IM_CS1_EINT 0x0040 /* IM_CS1_EINT */ +#define WM831X_IM_CS1_EINT_MASK 0x0040 /* IM_CS1_EINT */ +#define WM831X_IM_CS1_EINT_SHIFT 6 /* IM_CS1_EINT */ +#define WM831X_IM_CS1_EINT_WIDTH 1 /* IM_CS1_EINT */ +#define WM831X_IM_OTP_CMD_END_EINT 0x0020 /* IM_OTP_CMD_END_EINT */ +#define WM831X_IM_OTP_CMD_END_EINT_MASK 0x0020 /* IM_OTP_CMD_END_EINT */ +#define WM831X_IM_OTP_CMD_END_EINT_SHIFT 5 /* IM_OTP_CMD_END_EINT */ +#define WM831X_IM_OTP_CMD_END_EINT_WIDTH 1 /* IM_OTP_CMD_END_EINT */ +#define WM831X_IM_OTP_ERR_EINT 0x0010 /* IM_OTP_ERR_EINT */ +#define WM831X_IM_OTP_ERR_EINT_MASK 0x0010 /* IM_OTP_ERR_EINT */ +#define WM831X_IM_OTP_ERR_EINT_SHIFT 4 /* IM_OTP_ERR_EINT */ +#define WM831X_IM_OTP_ERR_EINT_WIDTH 1 /* IM_OTP_ERR_EINT */ +#define WM831X_IM_PS_POR_EINT 0x0004 /* IM_PS_POR_EINT */ +#define WM831X_IM_PS_POR_EINT_MASK 0x0004 /* IM_PS_POR_EINT */ +#define WM831X_IM_PS_POR_EINT_SHIFT 2 /* IM_PS_POR_EINT */ +#define WM831X_IM_PS_POR_EINT_WIDTH 1 /* IM_PS_POR_EINT */ +#define WM831X_IM_PS_SLEEP_OFF_EINT 0x0002 /* IM_PS_SLEEP_OFF_EINT */ +#define WM831X_IM_PS_SLEEP_OFF_EINT_MASK 0x0002 /* IM_PS_SLEEP_OFF_EINT */ +#define WM831X_IM_PS_SLEEP_OFF_EINT_SHIFT 1 /* IM_PS_SLEEP_OFF_EINT */ +#define WM831X_IM_PS_SLEEP_OFF_EINT_WIDTH 1 /* IM_PS_SLEEP_OFF_EINT */ +#define WM831X_IM_PS_ON_WAKE_EINT 0x0001 /* IM_PS_ON_WAKE_EINT */ +#define WM831X_IM_PS_ON_WAKE_EINT_MASK 0x0001 /* IM_PS_ON_WAKE_EINT */ +#define WM831X_IM_PS_ON_WAKE_EINT_SHIFT 0 /* IM_PS_ON_WAKE_EINT */ +#define WM831X_IM_PS_ON_WAKE_EINT_WIDTH 1 /* IM_PS_ON_WAKE_EINT */ + +/* + * R16411 (0x401B) - Interrupt Status 3 Mask + */ +#define WM831X_IM_UV_LDO10_EINT 0x0200 /* IM_UV_LDO10_EINT */ +#define WM831X_IM_UV_LDO10_EINT_MASK 0x0200 /* IM_UV_LDO10_EINT */ +#define WM831X_IM_UV_LDO10_EINT_SHIFT 9 /* IM_UV_LDO10_EINT */ +#define WM831X_IM_UV_LDO10_EINT_WIDTH 1 /* IM_UV_LDO10_EINT */ +#define WM831X_IM_UV_LDO9_EINT 0x0100 /* IM_UV_LDO9_EINT */ +#define WM831X_IM_UV_LDO9_EINT_MASK 0x0100 /* IM_UV_LDO9_EINT */ +#define WM831X_IM_UV_LDO9_EINT_SHIFT 8 /* IM_UV_LDO9_EINT */ +#define WM831X_IM_UV_LDO9_EINT_WIDTH 1 /* IM_UV_LDO9_EINT */ +#define WM831X_IM_UV_LDO8_EINT 0x0080 /* IM_UV_LDO8_EINT */ +#define WM831X_IM_UV_LDO8_EINT_MASK 0x0080 /* IM_UV_LDO8_EINT */ +#define WM831X_IM_UV_LDO8_EINT_SHIFT 7 /* IM_UV_LDO8_EINT */ +#define WM831X_IM_UV_LDO8_EINT_WIDTH 1 /* IM_UV_LDO8_EINT */ +#define WM831X_IM_UV_LDO7_EINT 0x0040 /* IM_UV_LDO7_EINT */ +#define WM831X_IM_UV_LDO7_EINT_MASK 0x0040 /* IM_UV_LDO7_EINT */ +#define WM831X_IM_UV_LDO7_EINT_SHIFT 6 /* IM_UV_LDO7_EINT */ +#define WM831X_IM_UV_LDO7_EINT_WIDTH 1 /* IM_UV_LDO7_EINT */ +#define WM831X_IM_UV_LDO6_EINT 0x0020 /* IM_UV_LDO6_EINT */ +#define WM831X_IM_UV_LDO6_EINT_MASK 0x0020 /* IM_UV_LDO6_EINT */ +#define WM831X_IM_UV_LDO6_EINT_SHIFT 5 /* IM_UV_LDO6_EINT */ +#define WM831X_IM_UV_LDO6_EINT_WIDTH 1 /* IM_UV_LDO6_EINT */ +#define WM831X_IM_UV_LDO5_EINT 0x0010 /* IM_UV_LDO5_EINT */ +#define WM831X_IM_UV_LDO5_EINT_MASK 0x0010 /* IM_UV_LDO5_EINT */ +#define WM831X_IM_UV_LDO5_EINT_SHIFT 4 /* IM_UV_LDO5_EINT */ +#define WM831X_IM_UV_LDO5_EINT_WIDTH 1 /* IM_UV_LDO5_EINT */ +#define WM831X_IM_UV_LDO4_EINT 0x0008 /* IM_UV_LDO4_EINT */ +#define WM831X_IM_UV_LDO4_EINT_MASK 0x0008 /* IM_UV_LDO4_EINT */ +#define WM831X_IM_UV_LDO4_EINT_SHIFT 3 /* IM_UV_LDO4_EINT */ +#define WM831X_IM_UV_LDO4_EINT_WIDTH 1 /* IM_UV_LDO4_EINT */ +#define WM831X_IM_UV_LDO3_EINT 0x0004 /* IM_UV_LDO3_EINT */ +#define WM831X_IM_UV_LDO3_EINT_MASK 0x0004 /* IM_UV_LDO3_EINT */ +#define WM831X_IM_UV_LDO3_EINT_SHIFT 2 /* IM_UV_LDO3_EINT */ +#define WM831X_IM_UV_LDO3_EINT_WIDTH 1 /* IM_UV_LDO3_EINT */ +#define WM831X_IM_UV_LDO2_EINT 0x0002 /* IM_UV_LDO2_EINT */ +#define WM831X_IM_UV_LDO2_EINT_MASK 0x0002 /* IM_UV_LDO2_EINT */ +#define WM831X_IM_UV_LDO2_EINT_SHIFT 1 /* IM_UV_LDO2_EINT */ +#define WM831X_IM_UV_LDO2_EINT_WIDTH 1 /* IM_UV_LDO2_EINT */ +#define WM831X_IM_UV_LDO1_EINT 0x0001 /* IM_UV_LDO1_EINT */ +#define WM831X_IM_UV_LDO1_EINT_MASK 0x0001 /* IM_UV_LDO1_EINT */ +#define WM831X_IM_UV_LDO1_EINT_SHIFT 0 /* IM_UV_LDO1_EINT */ +#define WM831X_IM_UV_LDO1_EINT_WIDTH 1 /* IM_UV_LDO1_EINT */ + +/* + * R16412 (0x401C) - Interrupt Status 4 Mask + */ +#define WM831X_IM_HC_DC2_EINT 0x0200 /* IM_HC_DC2_EINT */ +#define WM831X_IM_HC_DC2_EINT_MASK 0x0200 /* IM_HC_DC2_EINT */ +#define WM831X_IM_HC_DC2_EINT_SHIFT 9 /* IM_HC_DC2_EINT */ +#define WM831X_IM_HC_DC2_EINT_WIDTH 1 /* IM_HC_DC2_EINT */ +#define WM831X_IM_HC_DC1_EINT 0x0100 /* IM_HC_DC1_EINT */ +#define WM831X_IM_HC_DC1_EINT_MASK 0x0100 /* IM_HC_DC1_EINT */ +#define WM831X_IM_HC_DC1_EINT_SHIFT 8 /* IM_HC_DC1_EINT */ +#define WM831X_IM_HC_DC1_EINT_WIDTH 1 /* IM_HC_DC1_EINT */ +#define WM831X_IM_UV_DC4_EINT 0x0008 /* IM_UV_DC4_EINT */ +#define WM831X_IM_UV_DC4_EINT_MASK 0x0008 /* IM_UV_DC4_EINT */ +#define WM831X_IM_UV_DC4_EINT_SHIFT 3 /* IM_UV_DC4_EINT */ +#define WM831X_IM_UV_DC4_EINT_WIDTH 1 /* IM_UV_DC4_EINT */ +#define WM831X_IM_UV_DC3_EINT 0x0004 /* IM_UV_DC3_EINT */ +#define WM831X_IM_UV_DC3_EINT_MASK 0x0004 /* IM_UV_DC3_EINT */ +#define WM831X_IM_UV_DC3_EINT_SHIFT 2 /* IM_UV_DC3_EINT */ +#define WM831X_IM_UV_DC3_EINT_WIDTH 1 /* IM_UV_DC3_EINT */ +#define WM831X_IM_UV_DC2_EINT 0x0002 /* IM_UV_DC2_EINT */ +#define WM831X_IM_UV_DC2_EINT_MASK 0x0002 /* IM_UV_DC2_EINT */ +#define WM831X_IM_UV_DC2_EINT_SHIFT 1 /* IM_UV_DC2_EINT */ +#define WM831X_IM_UV_DC2_EINT_WIDTH 1 /* IM_UV_DC2_EINT */ +#define WM831X_IM_UV_DC1_EINT 0x0001 /* IM_UV_DC1_EINT */ +#define WM831X_IM_UV_DC1_EINT_MASK 0x0001 /* IM_UV_DC1_EINT */ +#define WM831X_IM_UV_DC1_EINT_SHIFT 0 /* IM_UV_DC1_EINT */ +#define WM831X_IM_UV_DC1_EINT_WIDTH 1 /* IM_UV_DC1_EINT */ + +/* + * R16413 (0x401D) - Interrupt Status 5 Mask + */ +#define WM831X_IM_GP16_EINT 0x8000 /* IM_GP16_EINT */ +#define WM831X_IM_GP16_EINT_MASK 0x8000 /* IM_GP16_EINT */ +#define WM831X_IM_GP16_EINT_SHIFT 15 /* IM_GP16_EINT */ +#define WM831X_IM_GP16_EINT_WIDTH 1 /* IM_GP16_EINT */ +#define WM831X_IM_GP15_EINT 0x4000 /* IM_GP15_EINT */ +#define WM831X_IM_GP15_EINT_MASK 0x4000 /* IM_GP15_EINT */ +#define WM831X_IM_GP15_EINT_SHIFT 14 /* IM_GP15_EINT */ +#define WM831X_IM_GP15_EINT_WIDTH 1 /* IM_GP15_EINT */ +#define WM831X_IM_GP14_EINT 0x2000 /* IM_GP14_EINT */ +#define WM831X_IM_GP14_EINT_MASK 0x2000 /* IM_GP14_EINT */ +#define WM831X_IM_GP14_EINT_SHIFT 13 /* IM_GP14_EINT */ +#define WM831X_IM_GP14_EINT_WIDTH 1 /* IM_GP14_EINT */ +#define WM831X_IM_GP13_EINT 0x1000 /* IM_GP13_EINT */ +#define WM831X_IM_GP13_EINT_MASK 0x1000 /* IM_GP13_EINT */ +#define WM831X_IM_GP13_EINT_SHIFT 12 /* IM_GP13_EINT */ +#define WM831X_IM_GP13_EINT_WIDTH 1 /* IM_GP13_EINT */ +#define WM831X_IM_GP12_EINT 0x0800 /* IM_GP12_EINT */ +#define WM831X_IM_GP12_EINT_MASK 0x0800 /* IM_GP12_EINT */ +#define WM831X_IM_GP12_EINT_SHIFT 11 /* IM_GP12_EINT */ +#define WM831X_IM_GP12_EINT_WIDTH 1 /* IM_GP12_EINT */ +#define WM831X_IM_GP11_EINT 0x0400 /* IM_GP11_EINT */ +#define WM831X_IM_GP11_EINT_MASK 0x0400 /* IM_GP11_EINT */ +#define WM831X_IM_GP11_EINT_SHIFT 10 /* IM_GP11_EINT */ +#define WM831X_IM_GP11_EINT_WIDTH 1 /* IM_GP11_EINT */ +#define WM831X_IM_GP10_EINT 0x0200 /* IM_GP10_EINT */ +#define WM831X_IM_GP10_EINT_MASK 0x0200 /* IM_GP10_EINT */ +#define WM831X_IM_GP10_EINT_SHIFT 9 /* IM_GP10_EINT */ +#define WM831X_IM_GP10_EINT_WIDTH 1 /* IM_GP10_EINT */ +#define WM831X_IM_GP9_EINT 0x0100 /* IM_GP9_EINT */ +#define WM831X_IM_GP9_EINT_MASK 0x0100 /* IM_GP9_EINT */ +#define WM831X_IM_GP9_EINT_SHIFT 8 /* IM_GP9_EINT */ +#define WM831X_IM_GP9_EINT_WIDTH 1 /* IM_GP9_EINT */ +#define WM831X_IM_GP8_EINT 0x0080 /* IM_GP8_EINT */ +#define WM831X_IM_GP8_EINT_MASK 0x0080 /* IM_GP8_EINT */ +#define WM831X_IM_GP8_EINT_SHIFT 7 /* IM_GP8_EINT */ +#define WM831X_IM_GP8_EINT_WIDTH 1 /* IM_GP8_EINT */ +#define WM831X_IM_GP7_EINT 0x0040 /* IM_GP7_EINT */ +#define WM831X_IM_GP7_EINT_MASK 0x0040 /* IM_GP7_EINT */ +#define WM831X_IM_GP7_EINT_SHIFT 6 /* IM_GP7_EINT */ +#define WM831X_IM_GP7_EINT_WIDTH 1 /* IM_GP7_EINT */ +#define WM831X_IM_GP6_EINT 0x0020 /* IM_GP6_EINT */ +#define WM831X_IM_GP6_EINT_MASK 0x0020 /* IM_GP6_EINT */ +#define WM831X_IM_GP6_EINT_SHIFT 5 /* IM_GP6_EINT */ +#define WM831X_IM_GP6_EINT_WIDTH 1 /* IM_GP6_EINT */ +#define WM831X_IM_GP5_EINT 0x0010 /* IM_GP5_EINT */ +#define WM831X_IM_GP5_EINT_MASK 0x0010 /* IM_GP5_EINT */ +#define WM831X_IM_GP5_EINT_SHIFT 4 /* IM_GP5_EINT */ +#define WM831X_IM_GP5_EINT_WIDTH 1 /* IM_GP5_EINT */ +#define WM831X_IM_GP4_EINT 0x0008 /* IM_GP4_EINT */ +#define WM831X_IM_GP4_EINT_MASK 0x0008 /* IM_GP4_EINT */ +#define WM831X_IM_GP4_EINT_SHIFT 3 /* IM_GP4_EINT */ +#define WM831X_IM_GP4_EINT_WIDTH 1 /* IM_GP4_EINT */ +#define WM831X_IM_GP3_EINT 0x0004 /* IM_GP3_EINT */ +#define WM831X_IM_GP3_EINT_MASK 0x0004 /* IM_GP3_EINT */ +#define WM831X_IM_GP3_EINT_SHIFT 2 /* IM_GP3_EINT */ +#define WM831X_IM_GP3_EINT_WIDTH 1 /* IM_GP3_EINT */ +#define WM831X_IM_GP2_EINT 0x0002 /* IM_GP2_EINT */ +#define WM831X_IM_GP2_EINT_MASK 0x0002 /* IM_GP2_EINT */ +#define WM831X_IM_GP2_EINT_SHIFT 1 /* IM_GP2_EINT */ +#define WM831X_IM_GP2_EINT_WIDTH 1 /* IM_GP2_EINT */ +#define WM831X_IM_GP1_EINT 0x0001 /* IM_GP1_EINT */ +#define WM831X_IM_GP1_EINT_MASK 0x0001 /* IM_GP1_EINT */ +#define WM831X_IM_GP1_EINT_SHIFT 0 /* IM_GP1_EINT */ +#define WM831X_IM_GP1_EINT_WIDTH 1 /* IM_GP1_EINT */ + + +#endif -- cgit v1.2.3 From 7e9f9fd4b8285c52c0950a1929864346de5caa6d Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 27 Jul 2009 14:45:54 +0100 Subject: mfd: Add WM831x AUXADC support The WM831x contains an auxiliary ADC with a number of switchable inputs which is used to monitor some of the voltages and temperatures in the system and has some external inputs which can be used for machine specific purposes. Provide an API allowing drivers to read values from the ADC. An internal reference voltage is provided to allow callibration of the ADC. This is used to calibrate the device at startup. The hardware also supports continuous readings and digital comparators. These are not yet supported by the driver. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/wm831x/auxadc.h | 216 ++++++++++++++++++++++++++++++++++++++ include/linux/mfd/wm831x/core.h | 2 + 2 files changed, 218 insertions(+) create mode 100644 include/linux/mfd/wm831x/auxadc.h (limited to 'include/linux') diff --git a/include/linux/mfd/wm831x/auxadc.h b/include/linux/mfd/wm831x/auxadc.h new file mode 100644 index 000000000000..b132067e9e99 --- /dev/null +++ b/include/linux/mfd/wm831x/auxadc.h @@ -0,0 +1,216 @@ +/* + * include/linux/mfd/wm831x/auxadc.h -- Auxiliary ADC interface for WM831x + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MFD_WM831X_AUXADC_H__ +#define __MFD_WM831X_AUXADC_H__ + +/* + * R16429 (0x402D) - AuxADC Data + */ +#define WM831X_AUX_DATA_SRC_MASK 0xF000 /* AUX_DATA_SRC - [15:12] */ +#define WM831X_AUX_DATA_SRC_SHIFT 12 /* AUX_DATA_SRC - [15:12] */ +#define WM831X_AUX_DATA_SRC_WIDTH 4 /* AUX_DATA_SRC - [15:12] */ +#define WM831X_AUX_DATA_MASK 0x0FFF /* AUX_DATA - [11:0] */ +#define WM831X_AUX_DATA_SHIFT 0 /* AUX_DATA - [11:0] */ +#define WM831X_AUX_DATA_WIDTH 12 /* AUX_DATA - [11:0] */ + +/* + * R16430 (0x402E) - AuxADC Control + */ +#define WM831X_AUX_ENA 0x8000 /* AUX_ENA */ +#define WM831X_AUX_ENA_MASK 0x8000 /* AUX_ENA */ +#define WM831X_AUX_ENA_SHIFT 15 /* AUX_ENA */ +#define WM831X_AUX_ENA_WIDTH 1 /* AUX_ENA */ +#define WM831X_AUX_CVT_ENA 0x4000 /* AUX_CVT_ENA */ +#define WM831X_AUX_CVT_ENA_MASK 0x4000 /* AUX_CVT_ENA */ +#define WM831X_AUX_CVT_ENA_SHIFT 14 /* AUX_CVT_ENA */ +#define WM831X_AUX_CVT_ENA_WIDTH 1 /* AUX_CVT_ENA */ +#define WM831X_AUX_SLPENA 0x1000 /* AUX_SLPENA */ +#define WM831X_AUX_SLPENA_MASK 0x1000 /* AUX_SLPENA */ +#define WM831X_AUX_SLPENA_SHIFT 12 /* AUX_SLPENA */ +#define WM831X_AUX_SLPENA_WIDTH 1 /* AUX_SLPENA */ +#define WM831X_AUX_FRC_ENA 0x0800 /* AUX_FRC_ENA */ +#define WM831X_AUX_FRC_ENA_MASK 0x0800 /* AUX_FRC_ENA */ +#define WM831X_AUX_FRC_ENA_SHIFT 11 /* AUX_FRC_ENA */ +#define WM831X_AUX_FRC_ENA_WIDTH 1 /* AUX_FRC_ENA */ +#define WM831X_AUX_RATE_MASK 0x003F /* AUX_RATE - [5:0] */ +#define WM831X_AUX_RATE_SHIFT 0 /* AUX_RATE - [5:0] */ +#define WM831X_AUX_RATE_WIDTH 6 /* AUX_RATE - [5:0] */ + +/* + * R16431 (0x402F) - AuxADC Source + */ +#define WM831X_AUX_CAL_SEL 0x8000 /* AUX_CAL_SEL */ +#define WM831X_AUX_CAL_SEL_MASK 0x8000 /* AUX_CAL_SEL */ +#define WM831X_AUX_CAL_SEL_SHIFT 15 /* AUX_CAL_SEL */ +#define WM831X_AUX_CAL_SEL_WIDTH 1 /* AUX_CAL_SEL */ +#define WM831X_AUX_BKUP_BATT_SEL 0x0400 /* AUX_BKUP_BATT_SEL */ +#define WM831X_AUX_BKUP_BATT_SEL_MASK 0x0400 /* AUX_BKUP_BATT_SEL */ +#define WM831X_AUX_BKUP_BATT_SEL_SHIFT 10 /* AUX_BKUP_BATT_SEL */ +#define WM831X_AUX_BKUP_BATT_SEL_WIDTH 1 /* AUX_BKUP_BATT_SEL */ +#define WM831X_AUX_WALL_SEL 0x0200 /* AUX_WALL_SEL */ +#define WM831X_AUX_WALL_SEL_MASK 0x0200 /* AUX_WALL_SEL */ +#define WM831X_AUX_WALL_SEL_SHIFT 9 /* AUX_WALL_SEL */ +#define WM831X_AUX_WALL_SEL_WIDTH 1 /* AUX_WALL_SEL */ +#define WM831X_AUX_BATT_SEL 0x0100 /* AUX_BATT_SEL */ +#define WM831X_AUX_BATT_SEL_MASK 0x0100 /* AUX_BATT_SEL */ +#define WM831X_AUX_BATT_SEL_SHIFT 8 /* AUX_BATT_SEL */ +#define WM831X_AUX_BATT_SEL_WIDTH 1 /* AUX_BATT_SEL */ +#define WM831X_AUX_USB_SEL 0x0080 /* AUX_USB_SEL */ +#define WM831X_AUX_USB_SEL_MASK 0x0080 /* AUX_USB_SEL */ +#define WM831X_AUX_USB_SEL_SHIFT 7 /* AUX_USB_SEL */ +#define WM831X_AUX_USB_SEL_WIDTH 1 /* AUX_USB_SEL */ +#define WM831X_AUX_SYSVDD_SEL 0x0040 /* AUX_SYSVDD_SEL */ +#define WM831X_AUX_SYSVDD_SEL_MASK 0x0040 /* AUX_SYSVDD_SEL */ +#define WM831X_AUX_SYSVDD_SEL_SHIFT 6 /* AUX_SYSVDD_SEL */ +#define WM831X_AUX_SYSVDD_SEL_WIDTH 1 /* AUX_SYSVDD_SEL */ +#define WM831X_AUX_BATT_TEMP_SEL 0x0020 /* AUX_BATT_TEMP_SEL */ +#define WM831X_AUX_BATT_TEMP_SEL_MASK 0x0020 /* AUX_BATT_TEMP_SEL */ +#define WM831X_AUX_BATT_TEMP_SEL_SHIFT 5 /* AUX_BATT_TEMP_SEL */ +#define WM831X_AUX_BATT_TEMP_SEL_WIDTH 1 /* AUX_BATT_TEMP_SEL */ +#define WM831X_AUX_CHIP_TEMP_SEL 0x0010 /* AUX_CHIP_TEMP_SEL */ +#define WM831X_AUX_CHIP_TEMP_SEL_MASK 0x0010 /* AUX_CHIP_TEMP_SEL */ +#define WM831X_AUX_CHIP_TEMP_SEL_SHIFT 4 /* AUX_CHIP_TEMP_SEL */ +#define WM831X_AUX_CHIP_TEMP_SEL_WIDTH 1 /* AUX_CHIP_TEMP_SEL */ +#define WM831X_AUX_AUX4_SEL 0x0008 /* AUX_AUX4_SEL */ +#define WM831X_AUX_AUX4_SEL_MASK 0x0008 /* AUX_AUX4_SEL */ +#define WM831X_AUX_AUX4_SEL_SHIFT 3 /* AUX_AUX4_SEL */ +#define WM831X_AUX_AUX4_SEL_WIDTH 1 /* AUX_AUX4_SEL */ +#define WM831X_AUX_AUX3_SEL 0x0004 /* AUX_AUX3_SEL */ +#define WM831X_AUX_AUX3_SEL_MASK 0x0004 /* AUX_AUX3_SEL */ +#define WM831X_AUX_AUX3_SEL_SHIFT 2 /* AUX_AUX3_SEL */ +#define WM831X_AUX_AUX3_SEL_WIDTH 1 /* AUX_AUX3_SEL */ +#define WM831X_AUX_AUX2_SEL 0x0002 /* AUX_AUX2_SEL */ +#define WM831X_AUX_AUX2_SEL_MASK 0x0002 /* AUX_AUX2_SEL */ +#define WM831X_AUX_AUX2_SEL_SHIFT 1 /* AUX_AUX2_SEL */ +#define WM831X_AUX_AUX2_SEL_WIDTH 1 /* AUX_AUX2_SEL */ +#define WM831X_AUX_AUX1_SEL 0x0001 /* AUX_AUX1_SEL */ +#define WM831X_AUX_AUX1_SEL_MASK 0x0001 /* AUX_AUX1_SEL */ +#define WM831X_AUX_AUX1_SEL_SHIFT 0 /* AUX_AUX1_SEL */ +#define WM831X_AUX_AUX1_SEL_WIDTH 1 /* AUX_AUX1_SEL */ + +/* + * R16432 (0x4030) - Comparator Control + */ +#define WM831X_DCOMP4_STS 0x0800 /* DCOMP4_STS */ +#define WM831X_DCOMP4_STS_MASK 0x0800 /* DCOMP4_STS */ +#define WM831X_DCOMP4_STS_SHIFT 11 /* DCOMP4_STS */ +#define WM831X_DCOMP4_STS_WIDTH 1 /* DCOMP4_STS */ +#define WM831X_DCOMP3_STS 0x0400 /* DCOMP3_STS */ +#define WM831X_DCOMP3_STS_MASK 0x0400 /* DCOMP3_STS */ +#define WM831X_DCOMP3_STS_SHIFT 10 /* DCOMP3_STS */ +#define WM831X_DCOMP3_STS_WIDTH 1 /* DCOMP3_STS */ +#define WM831X_DCOMP2_STS 0x0200 /* DCOMP2_STS */ +#define WM831X_DCOMP2_STS_MASK 0x0200 /* DCOMP2_STS */ +#define WM831X_DCOMP2_STS_SHIFT 9 /* DCOMP2_STS */ +#define WM831X_DCOMP2_STS_WIDTH 1 /* DCOMP2_STS */ +#define WM831X_DCOMP1_STS 0x0100 /* DCOMP1_STS */ +#define WM831X_DCOMP1_STS_MASK 0x0100 /* DCOMP1_STS */ +#define WM831X_DCOMP1_STS_SHIFT 8 /* DCOMP1_STS */ +#define WM831X_DCOMP1_STS_WIDTH 1 /* DCOMP1_STS */ +#define WM831X_DCMP4_ENA 0x0008 /* DCMP4_ENA */ +#define WM831X_DCMP4_ENA_MASK 0x0008 /* DCMP4_ENA */ +#define WM831X_DCMP4_ENA_SHIFT 3 /* DCMP4_ENA */ +#define WM831X_DCMP4_ENA_WIDTH 1 /* DCMP4_ENA */ +#define WM831X_DCMP3_ENA 0x0004 /* DCMP3_ENA */ +#define WM831X_DCMP3_ENA_MASK 0x0004 /* DCMP3_ENA */ +#define WM831X_DCMP3_ENA_SHIFT 2 /* DCMP3_ENA */ +#define WM831X_DCMP3_ENA_WIDTH 1 /* DCMP3_ENA */ +#define WM831X_DCMP2_ENA 0x0002 /* DCMP2_ENA */ +#define WM831X_DCMP2_ENA_MASK 0x0002 /* DCMP2_ENA */ +#define WM831X_DCMP2_ENA_SHIFT 1 /* DCMP2_ENA */ +#define WM831X_DCMP2_ENA_WIDTH 1 /* DCMP2_ENA */ +#define WM831X_DCMP1_ENA 0x0001 /* DCMP1_ENA */ +#define WM831X_DCMP1_ENA_MASK 0x0001 /* DCMP1_ENA */ +#define WM831X_DCMP1_ENA_SHIFT 0 /* DCMP1_ENA */ +#define WM831X_DCMP1_ENA_WIDTH 1 /* DCMP1_ENA */ + +/* + * R16433 (0x4031) - Comparator 1 + */ +#define WM831X_DCMP1_SRC_MASK 0xE000 /* DCMP1_SRC - [15:13] */ +#define WM831X_DCMP1_SRC_SHIFT 13 /* DCMP1_SRC - [15:13] */ +#define WM831X_DCMP1_SRC_WIDTH 3 /* DCMP1_SRC - [15:13] */ +#define WM831X_DCMP1_GT 0x1000 /* DCMP1_GT */ +#define WM831X_DCMP1_GT_MASK 0x1000 /* DCMP1_GT */ +#define WM831X_DCMP1_GT_SHIFT 12 /* DCMP1_GT */ +#define WM831X_DCMP1_GT_WIDTH 1 /* DCMP1_GT */ +#define WM831X_DCMP1_THR_MASK 0x0FFF /* DCMP1_THR - [11:0] */ +#define WM831X_DCMP1_THR_SHIFT 0 /* DCMP1_THR - [11:0] */ +#define WM831X_DCMP1_THR_WIDTH 12 /* DCMP1_THR - [11:0] */ + +/* + * R16434 (0x4032) - Comparator 2 + */ +#define WM831X_DCMP2_SRC_MASK 0xE000 /* DCMP2_SRC - [15:13] */ +#define WM831X_DCMP2_SRC_SHIFT 13 /* DCMP2_SRC - [15:13] */ +#define WM831X_DCMP2_SRC_WIDTH 3 /* DCMP2_SRC - [15:13] */ +#define WM831X_DCMP2_GT 0x1000 /* DCMP2_GT */ +#define WM831X_DCMP2_GT_MASK 0x1000 /* DCMP2_GT */ +#define WM831X_DCMP2_GT_SHIFT 12 /* DCMP2_GT */ +#define WM831X_DCMP2_GT_WIDTH 1 /* DCMP2_GT */ +#define WM831X_DCMP2_THR_MASK 0x0FFF /* DCMP2_THR - [11:0] */ +#define WM831X_DCMP2_THR_SHIFT 0 /* DCMP2_THR - [11:0] */ +#define WM831X_DCMP2_THR_WIDTH 12 /* DCMP2_THR - [11:0] */ + +/* + * R16435 (0x4033) - Comparator 3 + */ +#define WM831X_DCMP3_SRC_MASK 0xE000 /* DCMP3_SRC - [15:13] */ +#define WM831X_DCMP3_SRC_SHIFT 13 /* DCMP3_SRC - [15:13] */ +#define WM831X_DCMP3_SRC_WIDTH 3 /* DCMP3_SRC - [15:13] */ +#define WM831X_DCMP3_GT 0x1000 /* DCMP3_GT */ +#define WM831X_DCMP3_GT_MASK 0x1000 /* DCMP3_GT */ +#define WM831X_DCMP3_GT_SHIFT 12 /* DCMP3_GT */ +#define WM831X_DCMP3_GT_WIDTH 1 /* DCMP3_GT */ +#define WM831X_DCMP3_THR_MASK 0x0FFF /* DCMP3_THR - [11:0] */ +#define WM831X_DCMP3_THR_SHIFT 0 /* DCMP3_THR - [11:0] */ +#define WM831X_DCMP3_THR_WIDTH 12 /* DCMP3_THR - [11:0] */ + +/* + * R16436 (0x4034) - Comparator 4 + */ +#define WM831X_DCMP4_SRC_MASK 0xE000 /* DCMP4_SRC - [15:13] */ +#define WM831X_DCMP4_SRC_SHIFT 13 /* DCMP4_SRC - [15:13] */ +#define WM831X_DCMP4_SRC_WIDTH 3 /* DCMP4_SRC - [15:13] */ +#define WM831X_DCMP4_GT 0x1000 /* DCMP4_GT */ +#define WM831X_DCMP4_GT_MASK 0x1000 /* DCMP4_GT */ +#define WM831X_DCMP4_GT_SHIFT 12 /* DCMP4_GT */ +#define WM831X_DCMP4_GT_WIDTH 1 /* DCMP4_GT */ +#define WM831X_DCMP4_THR_MASK 0x0FFF /* DCMP4_THR - [11:0] */ +#define WM831X_DCMP4_THR_SHIFT 0 /* DCMP4_THR - [11:0] */ +#define WM831X_DCMP4_THR_WIDTH 12 /* DCMP4_THR - [11:0] */ + +#define WM831X_AUX_CAL_FACTOR 0xfff +#define WM831X_AUX_CAL_NOMINAL 0x222 + +enum wm831x_auxadc { + WM831X_AUX_CAL = 15, + WM831X_AUX_BKUP_BATT = 10, + WM831X_AUX_WALL = 9, + WM831X_AUX_BATT = 8, + WM831X_AUX_USB = 7, + WM831X_AUX_SYSVDD = 6, + WM831X_AUX_BATT_TEMP = 5, + WM831X_AUX_CHIP_TEMP = 4, + WM831X_AUX_AUX4 = 3, + WM831X_AUX_AUX3 = 2, + WM831X_AUX_AUX2 = 1, + WM831X_AUX_AUX1 = 0, +}; + +int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input); +int wm831x_auxadc_read_uv(struct wm831x *wm831x, enum wm831x_auxadc input); + +#endif diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h index b96c9355b16e..d7134dfba56e 100644 --- a/include/linux/mfd/wm831x/core.h +++ b/include/linux/mfd/wm831x/core.h @@ -234,6 +234,8 @@ struct wm831x { unsigned int irq_base; int irq_masks[5]; + struct mutex auxadc_lock; + /* The WM831x has a security key blocking access to certain * registers. The mutex is taken by the accessors for locking * and unlocking the security key, locked is used to fail -- cgit v1.2.3 From 63aed85e3535b4603798184cc941e49de386d354 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 27 Jul 2009 14:45:55 +0100 Subject: mfd: Conditionally add WM831x backlight subdevice The WM831x backlight driver requires at least the specification of the current sink to use and a maximum current to allow them to function and will actively interfere with other users of the regulators it uses if misconfigured so only register the subdevice for it if this platform data has been supplied. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/wm831x/pdata.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h index 571e60136264..90d820260aad 100644 --- a/include/linux/mfd/wm831x/pdata.h +++ b/include/linux/mfd/wm831x/pdata.h @@ -18,6 +18,11 @@ struct wm831x; struct regulator_init_data; +struct wm831x_backlight_pdata { + int isink; /** ISINK to use, 1 or 2 */ + int max_uA; /** Maximum current to allow */ +}; + struct wm831x_backup_pdata { int charger_enable; int no_constant_voltage; /** Disable constant voltage charging */ @@ -87,6 +92,7 @@ struct wm831x_pdata { int (*post_init)(struct wm831x *wm831x); int gpio_base; + struct wm831x_backlight_pdata *backlight; struct wm831x_backup_pdata *backup; struct wm831x_battery_pdata *battery; struct wm831x_touch_pdata *touch; -- cgit v1.2.3 From 6704e5171ba9053ba173bcd807c7392d2076bdb4 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 27 Jul 2009 14:45:56 +0100 Subject: mfd: Add basic WM831x OTP support The WM831x series of devices use OTP (One Time Programmable, a type of PROM) to store system configuration. At run time this data is visible via registers. Currently the only explicitly supported feature is that the unique ID provided by every WM831x device is exported to user space via sysfs. Other configuration data may be read by system-specific code in the pre_init() and post_init() platform data operations. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/wm831x/otp.h | 162 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 162 insertions(+) create mode 100644 include/linux/mfd/wm831x/otp.h (limited to 'include/linux') diff --git a/include/linux/mfd/wm831x/otp.h b/include/linux/mfd/wm831x/otp.h new file mode 100644 index 000000000000..ce1f81a39bfc --- /dev/null +++ b/include/linux/mfd/wm831x/otp.h @@ -0,0 +1,162 @@ +/* + * include/linux/mfd/wm831x/otp.h -- OTP interface for WM831x + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MFD_WM831X_OTP_H__ +#define __MFD_WM831X_OTP_H__ + +int wm831x_otp_init(struct wm831x *wm831x); +void wm831x_otp_exit(struct wm831x *wm831x); + +/* + * R30720 (0x7800) - Unique ID 1 + */ +#define WM831X_UNIQUE_ID_MASK 0xFFFF /* UNIQUE_ID - [15:0] */ +#define WM831X_UNIQUE_ID_SHIFT 0 /* UNIQUE_ID - [15:0] */ +#define WM831X_UNIQUE_ID_WIDTH 16 /* UNIQUE_ID - [15:0] */ + +/* + * R30721 (0x7801) - Unique ID 2 + */ +#define WM831X_UNIQUE_ID_MASK 0xFFFF /* UNIQUE_ID - [15:0] */ +#define WM831X_UNIQUE_ID_SHIFT 0 /* UNIQUE_ID - [15:0] */ +#define WM831X_UNIQUE_ID_WIDTH 16 /* UNIQUE_ID - [15:0] */ + +/* + * R30722 (0x7802) - Unique ID 3 + */ +#define WM831X_UNIQUE_ID_MASK 0xFFFF /* UNIQUE_ID - [15:0] */ +#define WM831X_UNIQUE_ID_SHIFT 0 /* UNIQUE_ID - [15:0] */ +#define WM831X_UNIQUE_ID_WIDTH 16 /* UNIQUE_ID - [15:0] */ + +/* + * R30723 (0x7803) - Unique ID 4 + */ +#define WM831X_UNIQUE_ID_MASK 0xFFFF /* UNIQUE_ID - [15:0] */ +#define WM831X_UNIQUE_ID_SHIFT 0 /* UNIQUE_ID - [15:0] */ +#define WM831X_UNIQUE_ID_WIDTH 16 /* UNIQUE_ID - [15:0] */ + +/* + * R30724 (0x7804) - Unique ID 5 + */ +#define WM831X_UNIQUE_ID_MASK 0xFFFF /* UNIQUE_ID - [15:0] */ +#define WM831X_UNIQUE_ID_SHIFT 0 /* UNIQUE_ID - [15:0] */ +#define WM831X_UNIQUE_ID_WIDTH 16 /* UNIQUE_ID - [15:0] */ + +/* + * R30725 (0x7805) - Unique ID 6 + */ +#define WM831X_UNIQUE_ID_MASK 0xFFFF /* UNIQUE_ID - [15:0] */ +#define WM831X_UNIQUE_ID_SHIFT 0 /* UNIQUE_ID - [15:0] */ +#define WM831X_UNIQUE_ID_WIDTH 16 /* UNIQUE_ID - [15:0] */ + +/* + * R30726 (0x7806) - Unique ID 7 + */ +#define WM831X_UNIQUE_ID_MASK 0xFFFF /* UNIQUE_ID - [15:0] */ +#define WM831X_UNIQUE_ID_SHIFT 0 /* UNIQUE_ID - [15:0] */ +#define WM831X_UNIQUE_ID_WIDTH 16 /* UNIQUE_ID - [15:0] */ + +/* + * R30727 (0x7807) - Unique ID 8 + */ +#define WM831X_UNIQUE_ID_MASK 0xFFFF /* UNIQUE_ID - [15:0] */ +#define WM831X_UNIQUE_ID_SHIFT 0 /* UNIQUE_ID - [15:0] */ +#define WM831X_UNIQUE_ID_WIDTH 16 /* UNIQUE_ID - [15:0] */ + +/* + * R30728 (0x7808) - Factory OTP ID + */ +#define WM831X_OTP_FACT_ID_MASK 0xFFFE /* OTP_FACT_ID - [15:1] */ +#define WM831X_OTP_FACT_ID_SHIFT 1 /* OTP_FACT_ID - [15:1] */ +#define WM831X_OTP_FACT_ID_WIDTH 15 /* OTP_FACT_ID - [15:1] */ +#define WM831X_OTP_FACT_FINAL 0x0001 /* OTP_FACT_FINAL */ +#define WM831X_OTP_FACT_FINAL_MASK 0x0001 /* OTP_FACT_FINAL */ +#define WM831X_OTP_FACT_FINAL_SHIFT 0 /* OTP_FACT_FINAL */ +#define WM831X_OTP_FACT_FINAL_WIDTH 1 /* OTP_FACT_FINAL */ + +/* + * R30729 (0x7809) - Factory OTP 1 + */ +#define WM831X_DC3_TRIM_MASK 0xF000 /* DC3_TRIM - [15:12] */ +#define WM831X_DC3_TRIM_SHIFT 12 /* DC3_TRIM - [15:12] */ +#define WM831X_DC3_TRIM_WIDTH 4 /* DC3_TRIM - [15:12] */ +#define WM831X_DC2_TRIM_MASK 0x0FC0 /* DC2_TRIM - [11:6] */ +#define WM831X_DC2_TRIM_SHIFT 6 /* DC2_TRIM - [11:6] */ +#define WM831X_DC2_TRIM_WIDTH 6 /* DC2_TRIM - [11:6] */ +#define WM831X_DC1_TRIM_MASK 0x003F /* DC1_TRIM - [5:0] */ +#define WM831X_DC1_TRIM_SHIFT 0 /* DC1_TRIM - [5:0] */ +#define WM831X_DC1_TRIM_WIDTH 6 /* DC1_TRIM - [5:0] */ + +/* + * R30730 (0x780A) - Factory OTP 2 + */ +#define WM831X_CHIP_ID_MASK 0xFFFF /* CHIP_ID - [15:0] */ +#define WM831X_CHIP_ID_SHIFT 0 /* CHIP_ID - [15:0] */ +#define WM831X_CHIP_ID_WIDTH 16 /* CHIP_ID - [15:0] */ + +/* + * R30731 (0x780B) - Factory OTP 3 + */ +#define WM831X_OSC_TRIM_MASK 0x0780 /* OSC_TRIM - [10:7] */ +#define WM831X_OSC_TRIM_SHIFT 7 /* OSC_TRIM - [10:7] */ +#define WM831X_OSC_TRIM_WIDTH 4 /* OSC_TRIM - [10:7] */ +#define WM831X_BG_TRIM_MASK 0x0078 /* BG_TRIM - [6:3] */ +#define WM831X_BG_TRIM_SHIFT 3 /* BG_TRIM - [6:3] */ +#define WM831X_BG_TRIM_WIDTH 4 /* BG_TRIM - [6:3] */ +#define WM831X_LPBG_TRIM_MASK 0x0007 /* LPBG_TRIM - [2:0] */ +#define WM831X_LPBG_TRIM_SHIFT 0 /* LPBG_TRIM - [2:0] */ +#define WM831X_LPBG_TRIM_WIDTH 3 /* LPBG_TRIM - [2:0] */ + +/* + * R30732 (0x780C) - Factory OTP 4 + */ +#define WM831X_CHILD_I2C_ADDR_MASK 0x00FE /* CHILD_I2C_ADDR - [7:1] */ +#define WM831X_CHILD_I2C_ADDR_SHIFT 1 /* CHILD_I2C_ADDR - [7:1] */ +#define WM831X_CHILD_I2C_ADDR_WIDTH 7 /* CHILD_I2C_ADDR - [7:1] */ +#define WM831X_CH_AW 0x0001 /* CH_AW */ +#define WM831X_CH_AW_MASK 0x0001 /* CH_AW */ +#define WM831X_CH_AW_SHIFT 0 /* CH_AW */ +#define WM831X_CH_AW_WIDTH 1 /* CH_AW */ + +/* + * R30733 (0x780D) - Factory OTP 5 + */ +#define WM831X_CHARGE_TRIM_MASK 0x003F /* CHARGE_TRIM - [5:0] */ +#define WM831X_CHARGE_TRIM_SHIFT 0 /* CHARGE_TRIM - [5:0] */ +#define WM831X_CHARGE_TRIM_WIDTH 6 /* CHARGE_TRIM - [5:0] */ + +/* + * R30736 (0x7810) - Customer OTP ID + */ +#define WM831X_OTP_AUTO_PROG 0x8000 /* OTP_AUTO_PROG */ +#define WM831X_OTP_AUTO_PROG_MASK 0x8000 /* OTP_AUTO_PROG */ +#define WM831X_OTP_AUTO_PROG_SHIFT 15 /* OTP_AUTO_PROG */ +#define WM831X_OTP_AUTO_PROG_WIDTH 1 /* OTP_AUTO_PROG */ +#define WM831X_OTP_CUST_ID_MASK 0x7FFE /* OTP_CUST_ID - [14:1] */ +#define WM831X_OTP_CUST_ID_SHIFT 1 /* OTP_CUST_ID - [14:1] */ +#define WM831X_OTP_CUST_ID_WIDTH 14 /* OTP_CUST_ID - [14:1] */ +#define WM831X_OTP_CUST_FINAL 0x0001 /* OTP_CUST_FINAL */ +#define WM831X_OTP_CUST_FINAL_MASK 0x0001 /* OTP_CUST_FINAL */ +#define WM831X_OTP_CUST_FINAL_SHIFT 0 /* OTP_CUST_FINAL */ +#define WM831X_OTP_CUST_FINAL_WIDTH 1 /* OTP_CUST_FINAL */ + +/* + * R30759 (0x7827) - DBE CHECK DATA + */ +#define WM831X_DBE_VALID_DATA_MASK 0xFFFF /* DBE_VALID_DATA - [15:0] */ +#define WM831X_DBE_VALID_DATA_SHIFT 0 /* DBE_VALID_DATA - [15:0] */ +#define WM831X_DBE_VALID_DATA_WIDTH 16 /* DBE_VALID_DATA - [15:0] */ + + +#endif -- cgit v1.2.3 From 698659d5f78606c698781574773f433c60176e40 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 27 Jul 2009 14:45:57 +0100 Subject: mfd: Export ISEL values from WM831x core The current settings which can be used with the WM831x current sinks can't easily be mapped between register values and currents at run time without a lookup table since the values scale logarithmically to match the way the human eye interprets brightness. This lookup table is inclided in the core since several drivers need to use it. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/wm831x/regulator.h | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 include/linux/mfd/wm831x/regulator.h (limited to 'include/linux') diff --git a/include/linux/mfd/wm831x/regulator.h b/include/linux/mfd/wm831x/regulator.h new file mode 100644 index 000000000000..b5d58fb38b4e --- /dev/null +++ b/include/linux/mfd/wm831x/regulator.h @@ -0,0 +1,21 @@ +/* + * linux/mfd/wm831x/regulator.h -- Regulator definitons for wm831x + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MFD_WM831X_REGULATOR_H__ +#define __MFD_WM831X_REGULATOR_H__ + +#define WM831X_ISINK_MAX_ISEL 56 +extern int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL]; + +#endif -- cgit v1.2.3 From e4b736f18f338daae141325c818187c4ab3e244c Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 27 Jul 2009 14:46:00 +0100 Subject: gpio: Add WM831X GPIO driver Add support for the GPIO pins on the WM831x. No direct support is currently supplied for configuring non-gpiolib functionality such as pull configuration and alternate functions, soft configuration of these will be provided in a future patch. Currently use of these pins as interrupts is not supported due to the ongoing issues with generic irq not support interrupt controllers on interrupt driven buses. Users can directly request the interrupts with the wm831x-specific APIs currently provided if required. Signed-off-by: Mark Brown Acked-by: David Brownell Signed-off-by: Samuel Ortiz --- include/linux/mfd/wm831x/gpio.h | 55 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+) create mode 100644 include/linux/mfd/wm831x/gpio.h (limited to 'include/linux') diff --git a/include/linux/mfd/wm831x/gpio.h b/include/linux/mfd/wm831x/gpio.h new file mode 100644 index 000000000000..2835614af0e3 --- /dev/null +++ b/include/linux/mfd/wm831x/gpio.h @@ -0,0 +1,55 @@ +/* + * include/linux/mfd/wm831x/gpio.h -- GPIO for WM831x + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MFD_WM831X_GPIO_H__ +#define __MFD_WM831X_GPIO_H__ + +/* + * R16440-16455 (0x4038-0x4047) - GPIOx Control + */ +#define WM831X_GPN_DIR 0x8000 /* GPN_DIR */ +#define WM831X_GPN_DIR_MASK 0x8000 /* GPN_DIR */ +#define WM831X_GPN_DIR_SHIFT 15 /* GPN_DIR */ +#define WM831X_GPN_DIR_WIDTH 1 /* GPN_DIR */ +#define WM831X_GPN_PULL_MASK 0x6000 /* GPN_PULL - [14:13] */ +#define WM831X_GPN_PULL_SHIFT 13 /* GPN_PULL - [14:13] */ +#define WM831X_GPN_PULL_WIDTH 2 /* GPN_PULL - [14:13] */ +#define WM831X_GPN_INT_MODE 0x1000 /* GPN_INT_MODE */ +#define WM831X_GPN_INT_MODE_MASK 0x1000 /* GPN_INT_MODE */ +#define WM831X_GPN_INT_MODE_SHIFT 12 /* GPN_INT_MODE */ +#define WM831X_GPN_INT_MODE_WIDTH 1 /* GPN_INT_MODE */ +#define WM831X_GPN_PWR_DOM 0x0800 /* GPN_PWR_DOM */ +#define WM831X_GPN_PWR_DOM_MASK 0x0800 /* GPN_PWR_DOM */ +#define WM831X_GPN_PWR_DOM_SHIFT 11 /* GPN_PWR_DOM */ +#define WM831X_GPN_PWR_DOM_WIDTH 1 /* GPN_PWR_DOM */ +#define WM831X_GPN_POL 0x0400 /* GPN_POL */ +#define WM831X_GPN_POL_MASK 0x0400 /* GPN_POL */ +#define WM831X_GPN_POL_SHIFT 10 /* GPN_POL */ +#define WM831X_GPN_POL_WIDTH 1 /* GPN_POL */ +#define WM831X_GPN_OD 0x0200 /* GPN_OD */ +#define WM831X_GPN_OD_MASK 0x0200 /* GPN_OD */ +#define WM831X_GPN_OD_SHIFT 9 /* GPN_OD */ +#define WM831X_GPN_OD_WIDTH 1 /* GPN_OD */ +#define WM831X_GPN_TRI 0x0080 /* GPN_TRI */ +#define WM831X_GPN_TRI_MASK 0x0080 /* GPN_TRI */ +#define WM831X_GPN_TRI_SHIFT 7 /* GPN_TRI */ +#define WM831X_GPN_TRI_WIDTH 1 /* GPN_TRI */ +#define WM831X_GPN_FN_MASK 0x000F /* GPN_FN - [3:0] */ +#define WM831X_GPN_FN_SHIFT 0 /* GPN_FN - [3:0] */ +#define WM831X_GPN_FN_WIDTH 4 /* GPN_FN - [3:0] */ + +#define WM831X_GPIO_PULL_NONE (0 << WM831X_GPN_PULL_SHIFT) +#define WM831X_GPIO_PULL_DOWN (1 << WM831X_GPN_PULL_SHIFT) +#define WM831X_GPIO_PULL_UP (2 << WM831X_GPN_PULL_SHIFT) +#endif -- cgit v1.2.3 From 0c73b992dd4c645f050344cb13142c0fd3496824 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 15 Sep 2009 12:07:12 +0200 Subject: input: Add support for the WM831x ON pin The WM831x series of PMICs support control of initial power on through the ON pin on the device with soft control of the pin at other times. Represent this to userspace as KEY_POWER. Signed-off-by: Mark Brown Acked-by: Dmitry Torokhov Signed-off-by: Samuel Ortiz --- include/linux/mfd/wm831x/core.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h index d7134dfba56e..91eb493bf14c 100644 --- a/include/linux/mfd/wm831x/core.h +++ b/include/linux/mfd/wm831x/core.h @@ -216,6 +216,25 @@ #define WM831X_PARENT_ID_SHIFT 0 /* PARENT_ID - [15:0] */ #define WM831X_PARENT_ID_WIDTH 16 /* PARENT_ID - [15:0] */ +/* + * R16389 (0x4005) - ON Pin Control + */ +#define WM831X_ON_PIN_SECACT_MASK 0x0300 /* ON_PIN_SECACT - [9:8] */ +#define WM831X_ON_PIN_SECACT_SHIFT 8 /* ON_PIN_SECACT - [9:8] */ +#define WM831X_ON_PIN_SECACT_WIDTH 2 /* ON_PIN_SECACT - [9:8] */ +#define WM831X_ON_PIN_PRIMACT_MASK 0x0030 /* ON_PIN_PRIMACT - [5:4] */ +#define WM831X_ON_PIN_PRIMACT_SHIFT 4 /* ON_PIN_PRIMACT - [5:4] */ +#define WM831X_ON_PIN_PRIMACT_WIDTH 2 /* ON_PIN_PRIMACT - [5:4] */ +#define WM831X_ON_PIN_STS 0x0008 /* ON_PIN_STS */ +#define WM831X_ON_PIN_STS_MASK 0x0008 /* ON_PIN_STS */ +#define WM831X_ON_PIN_STS_SHIFT 3 /* ON_PIN_STS */ +#define WM831X_ON_PIN_STS_WIDTH 1 /* ON_PIN_STS */ +#define WM831X_ON_PIN_TO_MASK 0x0003 /* ON_PIN_TO - [1:0] */ +#define WM831X_ON_PIN_TO_SHIFT 0 /* ON_PIN_TO - [1:0] */ +#define WM831X_ON_PIN_TO_WIDTH 2 /* ON_PIN_TO - [1:0] */ + +struct regulator_dev; + struct wm831x { struct mutex io_lock; -- cgit v1.2.3 From be721979dd6b335e4ab6f83abb5cc11c33662aa8 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 4 Aug 2009 20:09:52 +0200 Subject: regulator: Provide mode to status conversion function This is useful for implementing get_status() in terms of get_mode(). Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/regulator/driver.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 225f733e7533..ce1be708ca16 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -193,6 +193,8 @@ void *rdev_get_drvdata(struct regulator_dev *rdev); struct device *rdev_get_dev(struct regulator_dev *rdev); int rdev_get_id(struct regulator_dev *rdev); +int regulator_mode_to_status(unsigned int); + void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data); #endif -- cgit v1.2.3 From e4ee831f949a7c7746a56bcf1e7ca057d6f69e2a Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 28 Jul 2009 15:21:49 +0100 Subject: regulator: Add WM831x DC-DC buck convertor support The WM831x series of devices all have 3 DC-DC buck convertors. This driver implements software control for these regulators via the regulator API. Use with split hardware/software control of individual regulators is not supported, though regulators not controlled by software may be controlled via the hardware control interfaces. Signed-off-by: Mark Brown Acked-by: Liam Girdwood Signed-off-by: Samuel Ortiz --- include/linux/mfd/wm831x/regulator.h | 571 +++++++++++++++++++++++++++++++++++ 1 file changed, 571 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/wm831x/regulator.h b/include/linux/mfd/wm831x/regulator.h index b5d58fb38b4e..c74d6aafdca8 100644 --- a/include/linux/mfd/wm831x/regulator.h +++ b/include/linux/mfd/wm831x/regulator.h @@ -15,6 +15,577 @@ #ifndef __MFD_WM831X_REGULATOR_H__ #define __MFD_WM831X_REGULATOR_H__ +/* + * R16462 (0x404E) - Current Sink 1 + */ +#define WM831X_CS1_ENA 0x8000 /* CS1_ENA */ +#define WM831X_CS1_ENA_MASK 0x8000 /* CS1_ENA */ +#define WM831X_CS1_ENA_SHIFT 15 /* CS1_ENA */ +#define WM831X_CS1_ENA_WIDTH 1 /* CS1_ENA */ +#define WM831X_CS1_DRIVE 0x4000 /* CS1_DRIVE */ +#define WM831X_CS1_DRIVE_MASK 0x4000 /* CS1_DRIVE */ +#define WM831X_CS1_DRIVE_SHIFT 14 /* CS1_DRIVE */ +#define WM831X_CS1_DRIVE_WIDTH 1 /* CS1_DRIVE */ +#define WM831X_CS1_SLPENA 0x1000 /* CS1_SLPENA */ +#define WM831X_CS1_SLPENA_MASK 0x1000 /* CS1_SLPENA */ +#define WM831X_CS1_SLPENA_SHIFT 12 /* CS1_SLPENA */ +#define WM831X_CS1_SLPENA_WIDTH 1 /* CS1_SLPENA */ +#define WM831X_CS1_OFF_RAMP_MASK 0x0C00 /* CS1_OFF_RAMP - [11:10] */ +#define WM831X_CS1_OFF_RAMP_SHIFT 10 /* CS1_OFF_RAMP - [11:10] */ +#define WM831X_CS1_OFF_RAMP_WIDTH 2 /* CS1_OFF_RAMP - [11:10] */ +#define WM831X_CS1_ON_RAMP_MASK 0x0300 /* CS1_ON_RAMP - [9:8] */ +#define WM831X_CS1_ON_RAMP_SHIFT 8 /* CS1_ON_RAMP - [9:8] */ +#define WM831X_CS1_ON_RAMP_WIDTH 2 /* CS1_ON_RAMP - [9:8] */ +#define WM831X_CS1_ISEL_MASK 0x003F /* CS1_ISEL - [5:0] */ +#define WM831X_CS1_ISEL_SHIFT 0 /* CS1_ISEL - [5:0] */ +#define WM831X_CS1_ISEL_WIDTH 6 /* CS1_ISEL - [5:0] */ + +/* + * R16463 (0x404F) - Current Sink 2 + */ +#define WM831X_CS2_ENA 0x8000 /* CS2_ENA */ +#define WM831X_CS2_ENA_MASK 0x8000 /* CS2_ENA */ +#define WM831X_CS2_ENA_SHIFT 15 /* CS2_ENA */ +#define WM831X_CS2_ENA_WIDTH 1 /* CS2_ENA */ +#define WM831X_CS2_DRIVE 0x4000 /* CS2_DRIVE */ +#define WM831X_CS2_DRIVE_MASK 0x4000 /* CS2_DRIVE */ +#define WM831X_CS2_DRIVE_SHIFT 14 /* CS2_DRIVE */ +#define WM831X_CS2_DRIVE_WIDTH 1 /* CS2_DRIVE */ +#define WM831X_CS2_SLPENA 0x1000 /* CS2_SLPENA */ +#define WM831X_CS2_SLPENA_MASK 0x1000 /* CS2_SLPENA */ +#define WM831X_CS2_SLPENA_SHIFT 12 /* CS2_SLPENA */ +#define WM831X_CS2_SLPENA_WIDTH 1 /* CS2_SLPENA */ +#define WM831X_CS2_OFF_RAMP_MASK 0x0C00 /* CS2_OFF_RAMP - [11:10] */ +#define WM831X_CS2_OFF_RAMP_SHIFT 10 /* CS2_OFF_RAMP - [11:10] */ +#define WM831X_CS2_OFF_RAMP_WIDTH 2 /* CS2_OFF_RAMP - [11:10] */ +#define WM831X_CS2_ON_RAMP_MASK 0x0300 /* CS2_ON_RAMP - [9:8] */ +#define WM831X_CS2_ON_RAMP_SHIFT 8 /* CS2_ON_RAMP - [9:8] */ +#define WM831X_CS2_ON_RAMP_WIDTH 2 /* CS2_ON_RAMP - [9:8] */ +#define WM831X_CS2_ISEL_MASK 0x003F /* CS2_ISEL - [5:0] */ +#define WM831X_CS2_ISEL_SHIFT 0 /* CS2_ISEL - [5:0] */ +#define WM831X_CS2_ISEL_WIDTH 6 /* CS2_ISEL - [5:0] */ + +/* + * R16464 (0x4050) - DCDC Enable + */ +#define WM831X_EPE2_ENA 0x0080 /* EPE2_ENA */ +#define WM831X_EPE2_ENA_MASK 0x0080 /* EPE2_ENA */ +#define WM831X_EPE2_ENA_SHIFT 7 /* EPE2_ENA */ +#define WM831X_EPE2_ENA_WIDTH 1 /* EPE2_ENA */ +#define WM831X_EPE1_ENA 0x0040 /* EPE1_ENA */ +#define WM831X_EPE1_ENA_MASK 0x0040 /* EPE1_ENA */ +#define WM831X_EPE1_ENA_SHIFT 6 /* EPE1_ENA */ +#define WM831X_EPE1_ENA_WIDTH 1 /* EPE1_ENA */ +#define WM831X_DC4_ENA 0x0008 /* DC4_ENA */ +#define WM831X_DC4_ENA_MASK 0x0008 /* DC4_ENA */ +#define WM831X_DC4_ENA_SHIFT 3 /* DC4_ENA */ +#define WM831X_DC4_ENA_WIDTH 1 /* DC4_ENA */ +#define WM831X_DC3_ENA 0x0004 /* DC3_ENA */ +#define WM831X_DC3_ENA_MASK 0x0004 /* DC3_ENA */ +#define WM831X_DC3_ENA_SHIFT 2 /* DC3_ENA */ +#define WM831X_DC3_ENA_WIDTH 1 /* DC3_ENA */ +#define WM831X_DC2_ENA 0x0002 /* DC2_ENA */ +#define WM831X_DC2_ENA_MASK 0x0002 /* DC2_ENA */ +#define WM831X_DC2_ENA_SHIFT 1 /* DC2_ENA */ +#define WM831X_DC2_ENA_WIDTH 1 /* DC2_ENA */ +#define WM831X_DC1_ENA 0x0001 /* DC1_ENA */ +#define WM831X_DC1_ENA_MASK 0x0001 /* DC1_ENA */ +#define WM831X_DC1_ENA_SHIFT 0 /* DC1_ENA */ +#define WM831X_DC1_ENA_WIDTH 1 /* DC1_ENA */ + +/* + * R16465 (0x4051) - LDO Enable + */ +#define WM831X_LDO11_ENA 0x0400 /* LDO11_ENA */ +#define WM831X_LDO11_ENA_MASK 0x0400 /* LDO11_ENA */ +#define WM831X_LDO11_ENA_SHIFT 10 /* LDO11_ENA */ +#define WM831X_LDO11_ENA_WIDTH 1 /* LDO11_ENA */ +#define WM831X_LDO10_ENA 0x0200 /* LDO10_ENA */ +#define WM831X_LDO10_ENA_MASK 0x0200 /* LDO10_ENA */ +#define WM831X_LDO10_ENA_SHIFT 9 /* LDO10_ENA */ +#define WM831X_LDO10_ENA_WIDTH 1 /* LDO10_ENA */ +#define WM831X_LDO9_ENA 0x0100 /* LDO9_ENA */ +#define WM831X_LDO9_ENA_MASK 0x0100 /* LDO9_ENA */ +#define WM831X_LDO9_ENA_SHIFT 8 /* LDO9_ENA */ +#define WM831X_LDO9_ENA_WIDTH 1 /* LDO9_ENA */ +#define WM831X_LDO8_ENA 0x0080 /* LDO8_ENA */ +#define WM831X_LDO8_ENA_MASK 0x0080 /* LDO8_ENA */ +#define WM831X_LDO8_ENA_SHIFT 7 /* LDO8_ENA */ +#define WM831X_LDO8_ENA_WIDTH 1 /* LDO8_ENA */ +#define WM831X_LDO7_ENA 0x0040 /* LDO7_ENA */ +#define WM831X_LDO7_ENA_MASK 0x0040 /* LDO7_ENA */ +#define WM831X_LDO7_ENA_SHIFT 6 /* LDO7_ENA */ +#define WM831X_LDO7_ENA_WIDTH 1 /* LDO7_ENA */ +#define WM831X_LDO6_ENA 0x0020 /* LDO6_ENA */ +#define WM831X_LDO6_ENA_MASK 0x0020 /* LDO6_ENA */ +#define WM831X_LDO6_ENA_SHIFT 5 /* LDO6_ENA */ +#define WM831X_LDO6_ENA_WIDTH 1 /* LDO6_ENA */ +#define WM831X_LDO5_ENA 0x0010 /* LDO5_ENA */ +#define WM831X_LDO5_ENA_MASK 0x0010 /* LDO5_ENA */ +#define WM831X_LDO5_ENA_SHIFT 4 /* LDO5_ENA */ +#define WM831X_LDO5_ENA_WIDTH 1 /* LDO5_ENA */ +#define WM831X_LDO4_ENA 0x0008 /* LDO4_ENA */ +#define WM831X_LDO4_ENA_MASK 0x0008 /* LDO4_ENA */ +#define WM831X_LDO4_ENA_SHIFT 3 /* LDO4_ENA */ +#define WM831X_LDO4_ENA_WIDTH 1 /* LDO4_ENA */ +#define WM831X_LDO3_ENA 0x0004 /* LDO3_ENA */ +#define WM831X_LDO3_ENA_MASK 0x0004 /* LDO3_ENA */ +#define WM831X_LDO3_ENA_SHIFT 2 /* LDO3_ENA */ +#define WM831X_LDO3_ENA_WIDTH 1 /* LDO3_ENA */ +#define WM831X_LDO2_ENA 0x0002 /* LDO2_ENA */ +#define WM831X_LDO2_ENA_MASK 0x0002 /* LDO2_ENA */ +#define WM831X_LDO2_ENA_SHIFT 1 /* LDO2_ENA */ +#define WM831X_LDO2_ENA_WIDTH 1 /* LDO2_ENA */ +#define WM831X_LDO1_ENA 0x0001 /* LDO1_ENA */ +#define WM831X_LDO1_ENA_MASK 0x0001 /* LDO1_ENA */ +#define WM831X_LDO1_ENA_SHIFT 0 /* LDO1_ENA */ +#define WM831X_LDO1_ENA_WIDTH 1 /* LDO1_ENA */ + +/* + * R16466 (0x4052) - DCDC Status + */ +#define WM831X_EPE2_STS 0x0080 /* EPE2_STS */ +#define WM831X_EPE2_STS_MASK 0x0080 /* EPE2_STS */ +#define WM831X_EPE2_STS_SHIFT 7 /* EPE2_STS */ +#define WM831X_EPE2_STS_WIDTH 1 /* EPE2_STS */ +#define WM831X_EPE1_STS 0x0040 /* EPE1_STS */ +#define WM831X_EPE1_STS_MASK 0x0040 /* EPE1_STS */ +#define WM831X_EPE1_STS_SHIFT 6 /* EPE1_STS */ +#define WM831X_EPE1_STS_WIDTH 1 /* EPE1_STS */ +#define WM831X_DC4_STS 0x0008 /* DC4_STS */ +#define WM831X_DC4_STS_MASK 0x0008 /* DC4_STS */ +#define WM831X_DC4_STS_SHIFT 3 /* DC4_STS */ +#define WM831X_DC4_STS_WIDTH 1 /* DC4_STS */ +#define WM831X_DC3_STS 0x0004 /* DC3_STS */ +#define WM831X_DC3_STS_MASK 0x0004 /* DC3_STS */ +#define WM831X_DC3_STS_SHIFT 2 /* DC3_STS */ +#define WM831X_DC3_STS_WIDTH 1 /* DC3_STS */ +#define WM831X_DC2_STS 0x0002 /* DC2_STS */ +#define WM831X_DC2_STS_MASK 0x0002 /* DC2_STS */ +#define WM831X_DC2_STS_SHIFT 1 /* DC2_STS */ +#define WM831X_DC2_STS_WIDTH 1 /* DC2_STS */ +#define WM831X_DC1_STS 0x0001 /* DC1_STS */ +#define WM831X_DC1_STS_MASK 0x0001 /* DC1_STS */ +#define WM831X_DC1_STS_SHIFT 0 /* DC1_STS */ +#define WM831X_DC1_STS_WIDTH 1 /* DC1_STS */ + +/* + * R16467 (0x4053) - LDO Status + */ +#define WM831X_LDO11_STS 0x0400 /* LDO11_STS */ +#define WM831X_LDO11_STS_MASK 0x0400 /* LDO11_STS */ +#define WM831X_LDO11_STS_SHIFT 10 /* LDO11_STS */ +#define WM831X_LDO11_STS_WIDTH 1 /* LDO11_STS */ +#define WM831X_LDO10_STS 0x0200 /* LDO10_STS */ +#define WM831X_LDO10_STS_MASK 0x0200 /* LDO10_STS */ +#define WM831X_LDO10_STS_SHIFT 9 /* LDO10_STS */ +#define WM831X_LDO10_STS_WIDTH 1 /* LDO10_STS */ +#define WM831X_LDO9_STS 0x0100 /* LDO9_STS */ +#define WM831X_LDO9_STS_MASK 0x0100 /* LDO9_STS */ +#define WM831X_LDO9_STS_SHIFT 8 /* LDO9_STS */ +#define WM831X_LDO9_STS_WIDTH 1 /* LDO9_STS */ +#define WM831X_LDO8_STS 0x0080 /* LDO8_STS */ +#define WM831X_LDO8_STS_MASK 0x0080 /* LDO8_STS */ +#define WM831X_LDO8_STS_SHIFT 7 /* LDO8_STS */ +#define WM831X_LDO8_STS_WIDTH 1 /* LDO8_STS */ +#define WM831X_LDO7_STS 0x0040 /* LDO7_STS */ +#define WM831X_LDO7_STS_MASK 0x0040 /* LDO7_STS */ +#define WM831X_LDO7_STS_SHIFT 6 /* LDO7_STS */ +#define WM831X_LDO7_STS_WIDTH 1 /* LDO7_STS */ +#define WM831X_LDO6_STS 0x0020 /* LDO6_STS */ +#define WM831X_LDO6_STS_MASK 0x0020 /* LDO6_STS */ +#define WM831X_LDO6_STS_SHIFT 5 /* LDO6_STS */ +#define WM831X_LDO6_STS_WIDTH 1 /* LDO6_STS */ +#define WM831X_LDO5_STS 0x0010 /* LDO5_STS */ +#define WM831X_LDO5_STS_MASK 0x0010 /* LDO5_STS */ +#define WM831X_LDO5_STS_SHIFT 4 /* LDO5_STS */ +#define WM831X_LDO5_STS_WIDTH 1 /* LDO5_STS */ +#define WM831X_LDO4_STS 0x0008 /* LDO4_STS */ +#define WM831X_LDO4_STS_MASK 0x0008 /* LDO4_STS */ +#define WM831X_LDO4_STS_SHIFT 3 /* LDO4_STS */ +#define WM831X_LDO4_STS_WIDTH 1 /* LDO4_STS */ +#define WM831X_LDO3_STS 0x0004 /* LDO3_STS */ +#define WM831X_LDO3_STS_MASK 0x0004 /* LDO3_STS */ +#define WM831X_LDO3_STS_SHIFT 2 /* LDO3_STS */ +#define WM831X_LDO3_STS_WIDTH 1 /* LDO3_STS */ +#define WM831X_LDO2_STS 0x0002 /* LDO2_STS */ +#define WM831X_LDO2_STS_MASK 0x0002 /* LDO2_STS */ +#define WM831X_LDO2_STS_SHIFT 1 /* LDO2_STS */ +#define WM831X_LDO2_STS_WIDTH 1 /* LDO2_STS */ +#define WM831X_LDO1_STS 0x0001 /* LDO1_STS */ +#define WM831X_LDO1_STS_MASK 0x0001 /* LDO1_STS */ +#define WM831X_LDO1_STS_SHIFT 0 /* LDO1_STS */ +#define WM831X_LDO1_STS_WIDTH 1 /* LDO1_STS */ + +/* + * R16468 (0x4054) - DCDC UV Status + */ +#define WM831X_DC2_OV_STS 0x2000 /* DC2_OV_STS */ +#define WM831X_DC2_OV_STS_MASK 0x2000 /* DC2_OV_STS */ +#define WM831X_DC2_OV_STS_SHIFT 13 /* DC2_OV_STS */ +#define WM831X_DC2_OV_STS_WIDTH 1 /* DC2_OV_STS */ +#define WM831X_DC1_OV_STS 0x1000 /* DC1_OV_STS */ +#define WM831X_DC1_OV_STS_MASK 0x1000 /* DC1_OV_STS */ +#define WM831X_DC1_OV_STS_SHIFT 12 /* DC1_OV_STS */ +#define WM831X_DC1_OV_STS_WIDTH 1 /* DC1_OV_STS */ +#define WM831X_DC2_HC_STS 0x0200 /* DC2_HC_STS */ +#define WM831X_DC2_HC_STS_MASK 0x0200 /* DC2_HC_STS */ +#define WM831X_DC2_HC_STS_SHIFT 9 /* DC2_HC_STS */ +#define WM831X_DC2_HC_STS_WIDTH 1 /* DC2_HC_STS */ +#define WM831X_DC1_HC_STS 0x0100 /* DC1_HC_STS */ +#define WM831X_DC1_HC_STS_MASK 0x0100 /* DC1_HC_STS */ +#define WM831X_DC1_HC_STS_SHIFT 8 /* DC1_HC_STS */ +#define WM831X_DC1_HC_STS_WIDTH 1 /* DC1_HC_STS */ +#define WM831X_DC4_UV_STS 0x0008 /* DC4_UV_STS */ +#define WM831X_DC4_UV_STS_MASK 0x0008 /* DC4_UV_STS */ +#define WM831X_DC4_UV_STS_SHIFT 3 /* DC4_UV_STS */ +#define WM831X_DC4_UV_STS_WIDTH 1 /* DC4_UV_STS */ +#define WM831X_DC3_UV_STS 0x0004 /* DC3_UV_STS */ +#define WM831X_DC3_UV_STS_MASK 0x0004 /* DC3_UV_STS */ +#define WM831X_DC3_UV_STS_SHIFT 2 /* DC3_UV_STS */ +#define WM831X_DC3_UV_STS_WIDTH 1 /* DC3_UV_STS */ +#define WM831X_DC2_UV_STS 0x0002 /* DC2_UV_STS */ +#define WM831X_DC2_UV_STS_MASK 0x0002 /* DC2_UV_STS */ +#define WM831X_DC2_UV_STS_SHIFT 1 /* DC2_UV_STS */ +#define WM831X_DC2_UV_STS_WIDTH 1 /* DC2_UV_STS */ +#define WM831X_DC1_UV_STS 0x0001 /* DC1_UV_STS */ +#define WM831X_DC1_UV_STS_MASK 0x0001 /* DC1_UV_STS */ +#define WM831X_DC1_UV_STS_SHIFT 0 /* DC1_UV_STS */ +#define WM831X_DC1_UV_STS_WIDTH 1 /* DC1_UV_STS */ + +/* + * R16469 (0x4055) - LDO UV Status + */ +#define WM831X_INTLDO_UV_STS 0x8000 /* INTLDO_UV_STS */ +#define WM831X_INTLDO_UV_STS_MASK 0x8000 /* INTLDO_UV_STS */ +#define WM831X_INTLDO_UV_STS_SHIFT 15 /* INTLDO_UV_STS */ +#define WM831X_INTLDO_UV_STS_WIDTH 1 /* INTLDO_UV_STS */ +#define WM831X_LDO10_UV_STS 0x0200 /* LDO10_UV_STS */ +#define WM831X_LDO10_UV_STS_MASK 0x0200 /* LDO10_UV_STS */ +#define WM831X_LDO10_UV_STS_SHIFT 9 /* LDO10_UV_STS */ +#define WM831X_LDO10_UV_STS_WIDTH 1 /* LDO10_UV_STS */ +#define WM831X_LDO9_UV_STS 0x0100 /* LDO9_UV_STS */ +#define WM831X_LDO9_UV_STS_MASK 0x0100 /* LDO9_UV_STS */ +#define WM831X_LDO9_UV_STS_SHIFT 8 /* LDO9_UV_STS */ +#define WM831X_LDO9_UV_STS_WIDTH 1 /* LDO9_UV_STS */ +#define WM831X_LDO8_UV_STS 0x0080 /* LDO8_UV_STS */ +#define WM831X_LDO8_UV_STS_MASK 0x0080 /* LDO8_UV_STS */ +#define WM831X_LDO8_UV_STS_SHIFT 7 /* LDO8_UV_STS */ +#define WM831X_LDO8_UV_STS_WIDTH 1 /* LDO8_UV_STS */ +#define WM831X_LDO7_UV_STS 0x0040 /* LDO7_UV_STS */ +#define WM831X_LDO7_UV_STS_MASK 0x0040 /* LDO7_UV_STS */ +#define WM831X_LDO7_UV_STS_SHIFT 6 /* LDO7_UV_STS */ +#define WM831X_LDO7_UV_STS_WIDTH 1 /* LDO7_UV_STS */ +#define WM831X_LDO6_UV_STS 0x0020 /* LDO6_UV_STS */ +#define WM831X_LDO6_UV_STS_MASK 0x0020 /* LDO6_UV_STS */ +#define WM831X_LDO6_UV_STS_SHIFT 5 /* LDO6_UV_STS */ +#define WM831X_LDO6_UV_STS_WIDTH 1 /* LDO6_UV_STS */ +#define WM831X_LDO5_UV_STS 0x0010 /* LDO5_UV_STS */ +#define WM831X_LDO5_UV_STS_MASK 0x0010 /* LDO5_UV_STS */ +#define WM831X_LDO5_UV_STS_SHIFT 4 /* LDO5_UV_STS */ +#define WM831X_LDO5_UV_STS_WIDTH 1 /* LDO5_UV_STS */ +#define WM831X_LDO4_UV_STS 0x0008 /* LDO4_UV_STS */ +#define WM831X_LDO4_UV_STS_MASK 0x0008 /* LDO4_UV_STS */ +#define WM831X_LDO4_UV_STS_SHIFT 3 /* LDO4_UV_STS */ +#define WM831X_LDO4_UV_STS_WIDTH 1 /* LDO4_UV_STS */ +#define WM831X_LDO3_UV_STS 0x0004 /* LDO3_UV_STS */ +#define WM831X_LDO3_UV_STS_MASK 0x0004 /* LDO3_UV_STS */ +#define WM831X_LDO3_UV_STS_SHIFT 2 /* LDO3_UV_STS */ +#define WM831X_LDO3_UV_STS_WIDTH 1 /* LDO3_UV_STS */ +#define WM831X_LDO2_UV_STS 0x0002 /* LDO2_UV_STS */ +#define WM831X_LDO2_UV_STS_MASK 0x0002 /* LDO2_UV_STS */ +#define WM831X_LDO2_UV_STS_SHIFT 1 /* LDO2_UV_STS */ +#define WM831X_LDO2_UV_STS_WIDTH 1 /* LDO2_UV_STS */ +#define WM831X_LDO1_UV_STS 0x0001 /* LDO1_UV_STS */ +#define WM831X_LDO1_UV_STS_MASK 0x0001 /* LDO1_UV_STS */ +#define WM831X_LDO1_UV_STS_SHIFT 0 /* LDO1_UV_STS */ +#define WM831X_LDO1_UV_STS_WIDTH 1 /* LDO1_UV_STS */ + +/* + * R16470 (0x4056) - DC1 Control 1 + */ +#define WM831X_DC1_RATE_MASK 0xC000 /* DC1_RATE - [15:14] */ +#define WM831X_DC1_RATE_SHIFT 14 /* DC1_RATE - [15:14] */ +#define WM831X_DC1_RATE_WIDTH 2 /* DC1_RATE - [15:14] */ +#define WM831X_DC1_PHASE 0x1000 /* DC1_PHASE */ +#define WM831X_DC1_PHASE_MASK 0x1000 /* DC1_PHASE */ +#define WM831X_DC1_PHASE_SHIFT 12 /* DC1_PHASE */ +#define WM831X_DC1_PHASE_WIDTH 1 /* DC1_PHASE */ +#define WM831X_DC1_FREQ_MASK 0x0300 /* DC1_FREQ - [9:8] */ +#define WM831X_DC1_FREQ_SHIFT 8 /* DC1_FREQ - [9:8] */ +#define WM831X_DC1_FREQ_WIDTH 2 /* DC1_FREQ - [9:8] */ +#define WM831X_DC1_FLT 0x0080 /* DC1_FLT */ +#define WM831X_DC1_FLT_MASK 0x0080 /* DC1_FLT */ +#define WM831X_DC1_FLT_SHIFT 7 /* DC1_FLT */ +#define WM831X_DC1_FLT_WIDTH 1 /* DC1_FLT */ +#define WM831X_DC1_SOFT_START_MASK 0x0030 /* DC1_SOFT_START - [5:4] */ +#define WM831X_DC1_SOFT_START_SHIFT 4 /* DC1_SOFT_START - [5:4] */ +#define WM831X_DC1_SOFT_START_WIDTH 2 /* DC1_SOFT_START - [5:4] */ +#define WM831X_DC1_CAP_MASK 0x0003 /* DC1_CAP - [1:0] */ +#define WM831X_DC1_CAP_SHIFT 0 /* DC1_CAP - [1:0] */ +#define WM831X_DC1_CAP_WIDTH 2 /* DC1_CAP - [1:0] */ + +/* + * R16471 (0x4057) - DC1 Control 2 + */ +#define WM831X_DC1_ERR_ACT_MASK 0xC000 /* DC1_ERR_ACT - [15:14] */ +#define WM831X_DC1_ERR_ACT_SHIFT 14 /* DC1_ERR_ACT - [15:14] */ +#define WM831X_DC1_ERR_ACT_WIDTH 2 /* DC1_ERR_ACT - [15:14] */ +#define WM831X_DC1_HWC_SRC_MASK 0x1800 /* DC1_HWC_SRC - [12:11] */ +#define WM831X_DC1_HWC_SRC_SHIFT 11 /* DC1_HWC_SRC - [12:11] */ +#define WM831X_DC1_HWC_SRC_WIDTH 2 /* DC1_HWC_SRC - [12:11] */ +#define WM831X_DC1_HWC_VSEL 0x0400 /* DC1_HWC_VSEL */ +#define WM831X_DC1_HWC_VSEL_MASK 0x0400 /* DC1_HWC_VSEL */ +#define WM831X_DC1_HWC_VSEL_SHIFT 10 /* DC1_HWC_VSEL */ +#define WM831X_DC1_HWC_VSEL_WIDTH 1 /* DC1_HWC_VSEL */ +#define WM831X_DC1_HWC_MODE_MASK 0x0300 /* DC1_HWC_MODE - [9:8] */ +#define WM831X_DC1_HWC_MODE_SHIFT 8 /* DC1_HWC_MODE - [9:8] */ +#define WM831X_DC1_HWC_MODE_WIDTH 2 /* DC1_HWC_MODE - [9:8] */ +#define WM831X_DC1_HC_THR_MASK 0x0070 /* DC1_HC_THR - [6:4] */ +#define WM831X_DC1_HC_THR_SHIFT 4 /* DC1_HC_THR - [6:4] */ +#define WM831X_DC1_HC_THR_WIDTH 3 /* DC1_HC_THR - [6:4] */ +#define WM831X_DC1_HC_IND_ENA 0x0001 /* DC1_HC_IND_ENA */ +#define WM831X_DC1_HC_IND_ENA_MASK 0x0001 /* DC1_HC_IND_ENA */ +#define WM831X_DC1_HC_IND_ENA_SHIFT 0 /* DC1_HC_IND_ENA */ +#define WM831X_DC1_HC_IND_ENA_WIDTH 1 /* DC1_HC_IND_ENA */ + +/* + * R16472 (0x4058) - DC1 ON Config + */ +#define WM831X_DC1_ON_SLOT_MASK 0xE000 /* DC1_ON_SLOT - [15:13] */ +#define WM831X_DC1_ON_SLOT_SHIFT 13 /* DC1_ON_SLOT - [15:13] */ +#define WM831X_DC1_ON_SLOT_WIDTH 3 /* DC1_ON_SLOT - [15:13] */ +#define WM831X_DC1_ON_MODE_MASK 0x0300 /* DC1_ON_MODE - [9:8] */ +#define WM831X_DC1_ON_MODE_SHIFT 8 /* DC1_ON_MODE - [9:8] */ +#define WM831X_DC1_ON_MODE_WIDTH 2 /* DC1_ON_MODE - [9:8] */ +#define WM831X_DC1_ON_VSEL_MASK 0x007F /* DC1_ON_VSEL - [6:0] */ +#define WM831X_DC1_ON_VSEL_SHIFT 0 /* DC1_ON_VSEL - [6:0] */ +#define WM831X_DC1_ON_VSEL_WIDTH 7 /* DC1_ON_VSEL - [6:0] */ + +/* + * R16473 (0x4059) - DC1 SLEEP Control + */ +#define WM831X_DC1_SLP_SLOT_MASK 0xE000 /* DC1_SLP_SLOT - [15:13] */ +#define WM831X_DC1_SLP_SLOT_SHIFT 13 /* DC1_SLP_SLOT - [15:13] */ +#define WM831X_DC1_SLP_SLOT_WIDTH 3 /* DC1_SLP_SLOT - [15:13] */ +#define WM831X_DC1_SLP_MODE_MASK 0x0300 /* DC1_SLP_MODE - [9:8] */ +#define WM831X_DC1_SLP_MODE_SHIFT 8 /* DC1_SLP_MODE - [9:8] */ +#define WM831X_DC1_SLP_MODE_WIDTH 2 /* DC1_SLP_MODE - [9:8] */ +#define WM831X_DC1_SLP_VSEL_MASK 0x007F /* DC1_SLP_VSEL - [6:0] */ +#define WM831X_DC1_SLP_VSEL_SHIFT 0 /* DC1_SLP_VSEL - [6:0] */ +#define WM831X_DC1_SLP_VSEL_WIDTH 7 /* DC1_SLP_VSEL - [6:0] */ + +/* + * R16474 (0x405A) - DC1 DVS Control + */ +#define WM831X_DC1_DVS_SRC_MASK 0x1800 /* DC1_DVS_SRC - [12:11] */ +#define WM831X_DC1_DVS_SRC_SHIFT 11 /* DC1_DVS_SRC - [12:11] */ +#define WM831X_DC1_DVS_SRC_WIDTH 2 /* DC1_DVS_SRC - [12:11] */ +#define WM831X_DC1_DVS_VSEL_MASK 0x007F /* DC1_DVS_VSEL - [6:0] */ +#define WM831X_DC1_DVS_VSEL_SHIFT 0 /* DC1_DVS_VSEL - [6:0] */ +#define WM831X_DC1_DVS_VSEL_WIDTH 7 /* DC1_DVS_VSEL - [6:0] */ + +/* + * R16475 (0x405B) - DC2 Control 1 + */ +#define WM831X_DC2_RATE_MASK 0xC000 /* DC2_RATE - [15:14] */ +#define WM831X_DC2_RATE_SHIFT 14 /* DC2_RATE - [15:14] */ +#define WM831X_DC2_RATE_WIDTH 2 /* DC2_RATE - [15:14] */ +#define WM831X_DC2_PHASE 0x1000 /* DC2_PHASE */ +#define WM831X_DC2_PHASE_MASK 0x1000 /* DC2_PHASE */ +#define WM831X_DC2_PHASE_SHIFT 12 /* DC2_PHASE */ +#define WM831X_DC2_PHASE_WIDTH 1 /* DC2_PHASE */ +#define WM831X_DC2_FREQ_MASK 0x0300 /* DC2_FREQ - [9:8] */ +#define WM831X_DC2_FREQ_SHIFT 8 /* DC2_FREQ - [9:8] */ +#define WM831X_DC2_FREQ_WIDTH 2 /* DC2_FREQ - [9:8] */ +#define WM831X_DC2_FLT 0x0080 /* DC2_FLT */ +#define WM831X_DC2_FLT_MASK 0x0080 /* DC2_FLT */ +#define WM831X_DC2_FLT_SHIFT 7 /* DC2_FLT */ +#define WM831X_DC2_FLT_WIDTH 1 /* DC2_FLT */ +#define WM831X_DC2_SOFT_START_MASK 0x0030 /* DC2_SOFT_START - [5:4] */ +#define WM831X_DC2_SOFT_START_SHIFT 4 /* DC2_SOFT_START - [5:4] */ +#define WM831X_DC2_SOFT_START_WIDTH 2 /* DC2_SOFT_START - [5:4] */ +#define WM831X_DC2_CAP_MASK 0x0003 /* DC2_CAP - [1:0] */ +#define WM831X_DC2_CAP_SHIFT 0 /* DC2_CAP - [1:0] */ +#define WM831X_DC2_CAP_WIDTH 2 /* DC2_CAP - [1:0] */ + +/* + * R16476 (0x405C) - DC2 Control 2 + */ +#define WM831X_DC2_ERR_ACT_MASK 0xC000 /* DC2_ERR_ACT - [15:14] */ +#define WM831X_DC2_ERR_ACT_SHIFT 14 /* DC2_ERR_ACT - [15:14] */ +#define WM831X_DC2_ERR_ACT_WIDTH 2 /* DC2_ERR_ACT - [15:14] */ +#define WM831X_DC2_HWC_SRC_MASK 0x1800 /* DC2_HWC_SRC - [12:11] */ +#define WM831X_DC2_HWC_SRC_SHIFT 11 /* DC2_HWC_SRC - [12:11] */ +#define WM831X_DC2_HWC_SRC_WIDTH 2 /* DC2_HWC_SRC - [12:11] */ +#define WM831X_DC2_HWC_VSEL 0x0400 /* DC2_HWC_VSEL */ +#define WM831X_DC2_HWC_VSEL_MASK 0x0400 /* DC2_HWC_VSEL */ +#define WM831X_DC2_HWC_VSEL_SHIFT 10 /* DC2_HWC_VSEL */ +#define WM831X_DC2_HWC_VSEL_WIDTH 1 /* DC2_HWC_VSEL */ +#define WM831X_DC2_HWC_MODE_MASK 0x0300 /* DC2_HWC_MODE - [9:8] */ +#define WM831X_DC2_HWC_MODE_SHIFT 8 /* DC2_HWC_MODE - [9:8] */ +#define WM831X_DC2_HWC_MODE_WIDTH 2 /* DC2_HWC_MODE - [9:8] */ +#define WM831X_DC2_HC_THR_MASK 0x0070 /* DC2_HC_THR - [6:4] */ +#define WM831X_DC2_HC_THR_SHIFT 4 /* DC2_HC_THR - [6:4] */ +#define WM831X_DC2_HC_THR_WIDTH 3 /* DC2_HC_THR - [6:4] */ +#define WM831X_DC2_HC_IND_ENA 0x0001 /* DC2_HC_IND_ENA */ +#define WM831X_DC2_HC_IND_ENA_MASK 0x0001 /* DC2_HC_IND_ENA */ +#define WM831X_DC2_HC_IND_ENA_SHIFT 0 /* DC2_HC_IND_ENA */ +#define WM831X_DC2_HC_IND_ENA_WIDTH 1 /* DC2_HC_IND_ENA */ + +/* + * R16477 (0x405D) - DC2 ON Config + */ +#define WM831X_DC2_ON_SLOT_MASK 0xE000 /* DC2_ON_SLOT - [15:13] */ +#define WM831X_DC2_ON_SLOT_SHIFT 13 /* DC2_ON_SLOT - [15:13] */ +#define WM831X_DC2_ON_SLOT_WIDTH 3 /* DC2_ON_SLOT - [15:13] */ +#define WM831X_DC2_ON_MODE_MASK 0x0300 /* DC2_ON_MODE - [9:8] */ +#define WM831X_DC2_ON_MODE_SHIFT 8 /* DC2_ON_MODE - [9:8] */ +#define WM831X_DC2_ON_MODE_WIDTH 2 /* DC2_ON_MODE - [9:8] */ +#define WM831X_DC2_ON_VSEL_MASK 0x007F /* DC2_ON_VSEL - [6:0] */ +#define WM831X_DC2_ON_VSEL_SHIFT 0 /* DC2_ON_VSEL - [6:0] */ +#define WM831X_DC2_ON_VSEL_WIDTH 7 /* DC2_ON_VSEL - [6:0] */ + +/* + * R16478 (0x405E) - DC2 SLEEP Control + */ +#define WM831X_DC2_SLP_SLOT_MASK 0xE000 /* DC2_SLP_SLOT - [15:13] */ +#define WM831X_DC2_SLP_SLOT_SHIFT 13 /* DC2_SLP_SLOT - [15:13] */ +#define WM831X_DC2_SLP_SLOT_WIDTH 3 /* DC2_SLP_SLOT - [15:13] */ +#define WM831X_DC2_SLP_MODE_MASK 0x0300 /* DC2_SLP_MODE - [9:8] */ +#define WM831X_DC2_SLP_MODE_SHIFT 8 /* DC2_SLP_MODE - [9:8] */ +#define WM831X_DC2_SLP_MODE_WIDTH 2 /* DC2_SLP_MODE - [9:8] */ +#define WM831X_DC2_SLP_VSEL_MASK 0x007F /* DC2_SLP_VSEL - [6:0] */ +#define WM831X_DC2_SLP_VSEL_SHIFT 0 /* DC2_SLP_VSEL - [6:0] */ +#define WM831X_DC2_SLP_VSEL_WIDTH 7 /* DC2_SLP_VSEL - [6:0] */ + +/* + * R16479 (0x405F) - DC2 DVS Control + */ +#define WM831X_DC2_DVS_SRC_MASK 0x1800 /* DC2_DVS_SRC - [12:11] */ +#define WM831X_DC2_DVS_SRC_SHIFT 11 /* DC2_DVS_SRC - [12:11] */ +#define WM831X_DC2_DVS_SRC_WIDTH 2 /* DC2_DVS_SRC - [12:11] */ +#define WM831X_DC2_DVS_VSEL_MASK 0x007F /* DC2_DVS_VSEL - [6:0] */ +#define WM831X_DC2_DVS_VSEL_SHIFT 0 /* DC2_DVS_VSEL - [6:0] */ +#define WM831X_DC2_DVS_VSEL_WIDTH 7 /* DC2_DVS_VSEL - [6:0] */ + +/* + * R16480 (0x4060) - DC3 Control 1 + */ +#define WM831X_DC3_PHASE 0x1000 /* DC3_PHASE */ +#define WM831X_DC3_PHASE_MASK 0x1000 /* DC3_PHASE */ +#define WM831X_DC3_PHASE_SHIFT 12 /* DC3_PHASE */ +#define WM831X_DC3_PHASE_WIDTH 1 /* DC3_PHASE */ +#define WM831X_DC3_FLT 0x0080 /* DC3_FLT */ +#define WM831X_DC3_FLT_MASK 0x0080 /* DC3_FLT */ +#define WM831X_DC3_FLT_SHIFT 7 /* DC3_FLT */ +#define WM831X_DC3_FLT_WIDTH 1 /* DC3_FLT */ +#define WM831X_DC3_SOFT_START_MASK 0x0030 /* DC3_SOFT_START - [5:4] */ +#define WM831X_DC3_SOFT_START_SHIFT 4 /* DC3_SOFT_START - [5:4] */ +#define WM831X_DC3_SOFT_START_WIDTH 2 /* DC3_SOFT_START - [5:4] */ +#define WM831X_DC3_STNBY_LIM_MASK 0x000C /* DC3_STNBY_LIM - [3:2] */ +#define WM831X_DC3_STNBY_LIM_SHIFT 2 /* DC3_STNBY_LIM - [3:2] */ +#define WM831X_DC3_STNBY_LIM_WIDTH 2 /* DC3_STNBY_LIM - [3:2] */ +#define WM831X_DC3_CAP_MASK 0x0003 /* DC3_CAP - [1:0] */ +#define WM831X_DC3_CAP_SHIFT 0 /* DC3_CAP - [1:0] */ +#define WM831X_DC3_CAP_WIDTH 2 /* DC3_CAP - [1:0] */ + +/* + * R16481 (0x4061) - DC3 Control 2 + */ +#define WM831X_DC3_ERR_ACT_MASK 0xC000 /* DC3_ERR_ACT - [15:14] */ +#define WM831X_DC3_ERR_ACT_SHIFT 14 /* DC3_ERR_ACT - [15:14] */ +#define WM831X_DC3_ERR_ACT_WIDTH 2 /* DC3_ERR_ACT - [15:14] */ +#define WM831X_DC3_HWC_SRC_MASK 0x1800 /* DC3_HWC_SRC - [12:11] */ +#define WM831X_DC3_HWC_SRC_SHIFT 11 /* DC3_HWC_SRC - [12:11] */ +#define WM831X_DC3_HWC_SRC_WIDTH 2 /* DC3_HWC_SRC - [12:11] */ +#define WM831X_DC3_HWC_VSEL 0x0400 /* DC3_HWC_VSEL */ +#define WM831X_DC3_HWC_VSEL_MASK 0x0400 /* DC3_HWC_VSEL */ +#define WM831X_DC3_HWC_VSEL_SHIFT 10 /* DC3_HWC_VSEL */ +#define WM831X_DC3_HWC_VSEL_WIDTH 1 /* DC3_HWC_VSEL */ +#define WM831X_DC3_HWC_MODE_MASK 0x0300 /* DC3_HWC_MODE - [9:8] */ +#define WM831X_DC3_HWC_MODE_SHIFT 8 /* DC3_HWC_MODE - [9:8] */ +#define WM831X_DC3_HWC_MODE_WIDTH 2 /* DC3_HWC_MODE - [9:8] */ +#define WM831X_DC3_OVP 0x0080 /* DC3_OVP */ +#define WM831X_DC3_OVP_MASK 0x0080 /* DC3_OVP */ +#define WM831X_DC3_OVP_SHIFT 7 /* DC3_OVP */ +#define WM831X_DC3_OVP_WIDTH 1 /* DC3_OVP */ + +/* + * R16482 (0x4062) - DC3 ON Config + */ +#define WM831X_DC3_ON_SLOT_MASK 0xE000 /* DC3_ON_SLOT - [15:13] */ +#define WM831X_DC3_ON_SLOT_SHIFT 13 /* DC3_ON_SLOT - [15:13] */ +#define WM831X_DC3_ON_SLOT_WIDTH 3 /* DC3_ON_SLOT - [15:13] */ +#define WM831X_DC3_ON_MODE_MASK 0x0300 /* DC3_ON_MODE - [9:8] */ +#define WM831X_DC3_ON_MODE_SHIFT 8 /* DC3_ON_MODE - [9:8] */ +#define WM831X_DC3_ON_MODE_WIDTH 2 /* DC3_ON_MODE - [9:8] */ +#define WM831X_DC3_ON_VSEL_MASK 0x007F /* DC3_ON_VSEL - [6:0] */ +#define WM831X_DC3_ON_VSEL_SHIFT 0 /* DC3_ON_VSEL - [6:0] */ +#define WM831X_DC3_ON_VSEL_WIDTH 7 /* DC3_ON_VSEL - [6:0] */ + +/* + * R16483 (0x4063) - DC3 SLEEP Control + */ +#define WM831X_DC3_SLP_SLOT_MASK 0xE000 /* DC3_SLP_SLOT - [15:13] */ +#define WM831X_DC3_SLP_SLOT_SHIFT 13 /* DC3_SLP_SLOT - [15:13] */ +#define WM831X_DC3_SLP_SLOT_WIDTH 3 /* DC3_SLP_SLOT - [15:13] */ +#define WM831X_DC3_SLP_MODE_MASK 0x0300 /* DC3_SLP_MODE - [9:8] */ +#define WM831X_DC3_SLP_MODE_SHIFT 8 /* DC3_SLP_MODE - [9:8] */ +#define WM831X_DC3_SLP_MODE_WIDTH 2 /* DC3_SLP_MODE - [9:8] */ +#define WM831X_DC3_SLP_VSEL_MASK 0x007F /* DC3_SLP_VSEL - [6:0] */ +#define WM831X_DC3_SLP_VSEL_SHIFT 0 /* DC3_SLP_VSEL - [6:0] */ +#define WM831X_DC3_SLP_VSEL_WIDTH 7 /* DC3_SLP_VSEL - [6:0] */ + +/* + * R16484 (0x4064) - DC4 Control + */ +#define WM831X_DC4_ERR_ACT_MASK 0xC000 /* DC4_ERR_ACT - [15:14] */ +#define WM831X_DC4_ERR_ACT_SHIFT 14 /* DC4_ERR_ACT - [15:14] */ +#define WM831X_DC4_ERR_ACT_WIDTH 2 /* DC4_ERR_ACT - [15:14] */ +#define WM831X_DC4_HWC_SRC_MASK 0x1800 /* DC4_HWC_SRC - [12:11] */ +#define WM831X_DC4_HWC_SRC_SHIFT 11 /* DC4_HWC_SRC - [12:11] */ +#define WM831X_DC4_HWC_SRC_WIDTH 2 /* DC4_HWC_SRC - [12:11] */ +#define WM831X_DC4_HWC_MODE 0x0100 /* DC4_HWC_MODE */ +#define WM831X_DC4_HWC_MODE_MASK 0x0100 /* DC4_HWC_MODE */ +#define WM831X_DC4_HWC_MODE_SHIFT 8 /* DC4_HWC_MODE */ +#define WM831X_DC4_HWC_MODE_WIDTH 1 /* DC4_HWC_MODE */ +#define WM831X_DC4_RANGE_MASK 0x000C /* DC4_RANGE - [3:2] */ +#define WM831X_DC4_RANGE_SHIFT 2 /* DC4_RANGE - [3:2] */ +#define WM831X_DC4_RANGE_WIDTH 2 /* DC4_RANGE - [3:2] */ +#define WM831X_DC4_FBSRC 0x0001 /* DC4_FBSRC */ +#define WM831X_DC4_FBSRC_MASK 0x0001 /* DC4_FBSRC */ +#define WM831X_DC4_FBSRC_SHIFT 0 /* DC4_FBSRC */ +#define WM831X_DC4_FBSRC_WIDTH 1 /* DC4_FBSRC */ + +/* + * R16485 (0x4065) - DC4 SLEEP Control + */ +#define WM831X_DC4_SLPENA 0x0100 /* DC4_SLPENA */ +#define WM831X_DC4_SLPENA_MASK 0x0100 /* DC4_SLPENA */ +#define WM831X_DC4_SLPENA_SHIFT 8 /* DC4_SLPENA */ +#define WM831X_DC4_SLPENA_WIDTH 1 /* DC4_SLPENA */ + +/* + * R16526 (0x408E) - Power Good Source 1 + */ +#define WM831X_DC4_OK 0x0008 /* DC4_OK */ +#define WM831X_DC4_OK_MASK 0x0008 /* DC4_OK */ +#define WM831X_DC4_OK_SHIFT 3 /* DC4_OK */ +#define WM831X_DC4_OK_WIDTH 1 /* DC4_OK */ +#define WM831X_DC3_OK 0x0004 /* DC3_OK */ +#define WM831X_DC3_OK_MASK 0x0004 /* DC3_OK */ +#define WM831X_DC3_OK_SHIFT 2 /* DC3_OK */ +#define WM831X_DC3_OK_WIDTH 1 /* DC3_OK */ +#define WM831X_DC2_OK 0x0002 /* DC2_OK */ +#define WM831X_DC2_OK_MASK 0x0002 /* DC2_OK */ +#define WM831X_DC2_OK_SHIFT 1 /* DC2_OK */ +#define WM831X_DC2_OK_WIDTH 1 /* DC2_OK */ +#define WM831X_DC1_OK 0x0001 /* DC1_OK */ +#define WM831X_DC1_OK_MASK 0x0001 /* DC1_OK */ +#define WM831X_DC1_OK_SHIFT 0 /* DC1_OK */ +#define WM831X_DC1_OK_WIDTH 1 /* DC1_OK */ + #define WM831X_ISINK_MAX_ISEL 56 extern int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL]; -- cgit v1.2.3 From d1c6b4fe668b2ae02f490deee86eaab60822a362 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 28 Jul 2009 15:22:02 +0100 Subject: regulator: Add WM831x LDO support The WM831x series of devices provide three types of LDO: - General purpose LDOs supporting voltages from 0.9-3.3V - High performance analogue LDOs supporting voltages from 1-3.5V - Very low power consumption LDOs intended to support always on functionality. This patch adds support for all three kinds of LDO. Each regulator is probed as an individual platform device with resources used to provide the register map location of the regulator. Mixed hardware and software control of regulators is not current supported. Signed-off-by: Mark Brown Acked-by: Liam Girdwood Signed-off-by: Samuel Ortiz --- include/linux/mfd/wm831x/regulator.h | 626 +++++++++++++++++++++++++++++++++++ 1 file changed, 626 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/wm831x/regulator.h b/include/linux/mfd/wm831x/regulator.h index c74d6aafdca8..f95466343fb2 100644 --- a/include/linux/mfd/wm831x/regulator.h +++ b/include/linux/mfd/wm831x/regulator.h @@ -566,6 +566,588 @@ #define WM831X_DC4_SLPENA_SHIFT 8 /* DC4_SLPENA */ #define WM831X_DC4_SLPENA_WIDTH 1 /* DC4_SLPENA */ +/* + * R16488 (0x4068) - LDO1 Control + */ +#define WM831X_LDO1_ERR_ACT_MASK 0xC000 /* LDO1_ERR_ACT - [15:14] */ +#define WM831X_LDO1_ERR_ACT_SHIFT 14 /* LDO1_ERR_ACT - [15:14] */ +#define WM831X_LDO1_ERR_ACT_WIDTH 2 /* LDO1_ERR_ACT - [15:14] */ +#define WM831X_LDO1_HWC_SRC_MASK 0x1800 /* LDO1_HWC_SRC - [12:11] */ +#define WM831X_LDO1_HWC_SRC_SHIFT 11 /* LDO1_HWC_SRC - [12:11] */ +#define WM831X_LDO1_HWC_SRC_WIDTH 2 /* LDO1_HWC_SRC - [12:11] */ +#define WM831X_LDO1_HWC_VSEL 0x0400 /* LDO1_HWC_VSEL */ +#define WM831X_LDO1_HWC_VSEL_MASK 0x0400 /* LDO1_HWC_VSEL */ +#define WM831X_LDO1_HWC_VSEL_SHIFT 10 /* LDO1_HWC_VSEL */ +#define WM831X_LDO1_HWC_VSEL_WIDTH 1 /* LDO1_HWC_VSEL */ +#define WM831X_LDO1_HWC_MODE_MASK 0x0300 /* LDO1_HWC_MODE - [9:8] */ +#define WM831X_LDO1_HWC_MODE_SHIFT 8 /* LDO1_HWC_MODE - [9:8] */ +#define WM831X_LDO1_HWC_MODE_WIDTH 2 /* LDO1_HWC_MODE - [9:8] */ +#define WM831X_LDO1_FLT 0x0080 /* LDO1_FLT */ +#define WM831X_LDO1_FLT_MASK 0x0080 /* LDO1_FLT */ +#define WM831X_LDO1_FLT_SHIFT 7 /* LDO1_FLT */ +#define WM831X_LDO1_FLT_WIDTH 1 /* LDO1_FLT */ +#define WM831X_LDO1_SWI 0x0040 /* LDO1_SWI */ +#define WM831X_LDO1_SWI_MASK 0x0040 /* LDO1_SWI */ +#define WM831X_LDO1_SWI_SHIFT 6 /* LDO1_SWI */ +#define WM831X_LDO1_SWI_WIDTH 1 /* LDO1_SWI */ +#define WM831X_LDO1_LP_MODE 0x0001 /* LDO1_LP_MODE */ +#define WM831X_LDO1_LP_MODE_MASK 0x0001 /* LDO1_LP_MODE */ +#define WM831X_LDO1_LP_MODE_SHIFT 0 /* LDO1_LP_MODE */ +#define WM831X_LDO1_LP_MODE_WIDTH 1 /* LDO1_LP_MODE */ + +/* + * R16489 (0x4069) - LDO1 ON Control + */ +#define WM831X_LDO1_ON_SLOT_MASK 0xE000 /* LDO1_ON_SLOT - [15:13] */ +#define WM831X_LDO1_ON_SLOT_SHIFT 13 /* LDO1_ON_SLOT - [15:13] */ +#define WM831X_LDO1_ON_SLOT_WIDTH 3 /* LDO1_ON_SLOT - [15:13] */ +#define WM831X_LDO1_ON_MODE 0x0100 /* LDO1_ON_MODE */ +#define WM831X_LDO1_ON_MODE_MASK 0x0100 /* LDO1_ON_MODE */ +#define WM831X_LDO1_ON_MODE_SHIFT 8 /* LDO1_ON_MODE */ +#define WM831X_LDO1_ON_MODE_WIDTH 1 /* LDO1_ON_MODE */ +#define WM831X_LDO1_ON_VSEL_MASK 0x001F /* LDO1_ON_VSEL - [4:0] */ +#define WM831X_LDO1_ON_VSEL_SHIFT 0 /* LDO1_ON_VSEL - [4:0] */ +#define WM831X_LDO1_ON_VSEL_WIDTH 5 /* LDO1_ON_VSEL - [4:0] */ + +/* + * R16490 (0x406A) - LDO1 SLEEP Control + */ +#define WM831X_LDO1_SLP_SLOT_MASK 0xE000 /* LDO1_SLP_SLOT - [15:13] */ +#define WM831X_LDO1_SLP_SLOT_SHIFT 13 /* LDO1_SLP_SLOT - [15:13] */ +#define WM831X_LDO1_SLP_SLOT_WIDTH 3 /* LDO1_SLP_SLOT - [15:13] */ +#define WM831X_LDO1_SLP_MODE 0x0100 /* LDO1_SLP_MODE */ +#define WM831X_LDO1_SLP_MODE_MASK 0x0100 /* LDO1_SLP_MODE */ +#define WM831X_LDO1_SLP_MODE_SHIFT 8 /* LDO1_SLP_MODE */ +#define WM831X_LDO1_SLP_MODE_WIDTH 1 /* LDO1_SLP_MODE */ +#define WM831X_LDO1_SLP_VSEL_MASK 0x001F /* LDO1_SLP_VSEL - [4:0] */ +#define WM831X_LDO1_SLP_VSEL_SHIFT 0 /* LDO1_SLP_VSEL - [4:0] */ +#define WM831X_LDO1_SLP_VSEL_WIDTH 5 /* LDO1_SLP_VSEL - [4:0] */ + +/* + * R16491 (0x406B) - LDO2 Control + */ +#define WM831X_LDO2_ERR_ACT_MASK 0xC000 /* LDO2_ERR_ACT - [15:14] */ +#define WM831X_LDO2_ERR_ACT_SHIFT 14 /* LDO2_ERR_ACT - [15:14] */ +#define WM831X_LDO2_ERR_ACT_WIDTH 2 /* LDO2_ERR_ACT - [15:14] */ +#define WM831X_LDO2_HWC_SRC_MASK 0x1800 /* LDO2_HWC_SRC - [12:11] */ +#define WM831X_LDO2_HWC_SRC_SHIFT 11 /* LDO2_HWC_SRC - [12:11] */ +#define WM831X_LDO2_HWC_SRC_WIDTH 2 /* LDO2_HWC_SRC - [12:11] */ +#define WM831X_LDO2_HWC_VSEL 0x0400 /* LDO2_HWC_VSEL */ +#define WM831X_LDO2_HWC_VSEL_MASK 0x0400 /* LDO2_HWC_VSEL */ +#define WM831X_LDO2_HWC_VSEL_SHIFT 10 /* LDO2_HWC_VSEL */ +#define WM831X_LDO2_HWC_VSEL_WIDTH 1 /* LDO2_HWC_VSEL */ +#define WM831X_LDO2_HWC_MODE_MASK 0x0300 /* LDO2_HWC_MODE - [9:8] */ +#define WM831X_LDO2_HWC_MODE_SHIFT 8 /* LDO2_HWC_MODE - [9:8] */ +#define WM831X_LDO2_HWC_MODE_WIDTH 2 /* LDO2_HWC_MODE - [9:8] */ +#define WM831X_LDO2_FLT 0x0080 /* LDO2_FLT */ +#define WM831X_LDO2_FLT_MASK 0x0080 /* LDO2_FLT */ +#define WM831X_LDO2_FLT_SHIFT 7 /* LDO2_FLT */ +#define WM831X_LDO2_FLT_WIDTH 1 /* LDO2_FLT */ +#define WM831X_LDO2_SWI 0x0040 /* LDO2_SWI */ +#define WM831X_LDO2_SWI_MASK 0x0040 /* LDO2_SWI */ +#define WM831X_LDO2_SWI_SHIFT 6 /* LDO2_SWI */ +#define WM831X_LDO2_SWI_WIDTH 1 /* LDO2_SWI */ +#define WM831X_LDO2_LP_MODE 0x0001 /* LDO2_LP_MODE */ +#define WM831X_LDO2_LP_MODE_MASK 0x0001 /* LDO2_LP_MODE */ +#define WM831X_LDO2_LP_MODE_SHIFT 0 /* LDO2_LP_MODE */ +#define WM831X_LDO2_LP_MODE_WIDTH 1 /* LDO2_LP_MODE */ + +/* + * R16492 (0x406C) - LDO2 ON Control + */ +#define WM831X_LDO2_ON_SLOT_MASK 0xE000 /* LDO2_ON_SLOT - [15:13] */ +#define WM831X_LDO2_ON_SLOT_SHIFT 13 /* LDO2_ON_SLOT - [15:13] */ +#define WM831X_LDO2_ON_SLOT_WIDTH 3 /* LDO2_ON_SLOT - [15:13] */ +#define WM831X_LDO2_ON_MODE 0x0100 /* LDO2_ON_MODE */ +#define WM831X_LDO2_ON_MODE_MASK 0x0100 /* LDO2_ON_MODE */ +#define WM831X_LDO2_ON_MODE_SHIFT 8 /* LDO2_ON_MODE */ +#define WM831X_LDO2_ON_MODE_WIDTH 1 /* LDO2_ON_MODE */ +#define WM831X_LDO2_ON_VSEL_MASK 0x001F /* LDO2_ON_VSEL - [4:0] */ +#define WM831X_LDO2_ON_VSEL_SHIFT 0 /* LDO2_ON_VSEL - [4:0] */ +#define WM831X_LDO2_ON_VSEL_WIDTH 5 /* LDO2_ON_VSEL - [4:0] */ + +/* + * R16493 (0x406D) - LDO2 SLEEP Control + */ +#define WM831X_LDO2_SLP_SLOT_MASK 0xE000 /* LDO2_SLP_SLOT - [15:13] */ +#define WM831X_LDO2_SLP_SLOT_SHIFT 13 /* LDO2_SLP_SLOT - [15:13] */ +#define WM831X_LDO2_SLP_SLOT_WIDTH 3 /* LDO2_SLP_SLOT - [15:13] */ +#define WM831X_LDO2_SLP_MODE 0x0100 /* LDO2_SLP_MODE */ +#define WM831X_LDO2_SLP_MODE_MASK 0x0100 /* LDO2_SLP_MODE */ +#define WM831X_LDO2_SLP_MODE_SHIFT 8 /* LDO2_SLP_MODE */ +#define WM831X_LDO2_SLP_MODE_WIDTH 1 /* LDO2_SLP_MODE */ +#define WM831X_LDO2_SLP_VSEL_MASK 0x001F /* LDO2_SLP_VSEL - [4:0] */ +#define WM831X_LDO2_SLP_VSEL_SHIFT 0 /* LDO2_SLP_VSEL - [4:0] */ +#define WM831X_LDO2_SLP_VSEL_WIDTH 5 /* LDO2_SLP_VSEL - [4:0] */ + +/* + * R16494 (0x406E) - LDO3 Control + */ +#define WM831X_LDO3_ERR_ACT_MASK 0xC000 /* LDO3_ERR_ACT - [15:14] */ +#define WM831X_LDO3_ERR_ACT_SHIFT 14 /* LDO3_ERR_ACT - [15:14] */ +#define WM831X_LDO3_ERR_ACT_WIDTH 2 /* LDO3_ERR_ACT - [15:14] */ +#define WM831X_LDO3_HWC_SRC_MASK 0x1800 /* LDO3_HWC_SRC - [12:11] */ +#define WM831X_LDO3_HWC_SRC_SHIFT 11 /* LDO3_HWC_SRC - [12:11] */ +#define WM831X_LDO3_HWC_SRC_WIDTH 2 /* LDO3_HWC_SRC - [12:11] */ +#define WM831X_LDO3_HWC_VSEL 0x0400 /* LDO3_HWC_VSEL */ +#define WM831X_LDO3_HWC_VSEL_MASK 0x0400 /* LDO3_HWC_VSEL */ +#define WM831X_LDO3_HWC_VSEL_SHIFT 10 /* LDO3_HWC_VSEL */ +#define WM831X_LDO3_HWC_VSEL_WIDTH 1 /* LDO3_HWC_VSEL */ +#define WM831X_LDO3_HWC_MODE_MASK 0x0300 /* LDO3_HWC_MODE - [9:8] */ +#define WM831X_LDO3_HWC_MODE_SHIFT 8 /* LDO3_HWC_MODE - [9:8] */ +#define WM831X_LDO3_HWC_MODE_WIDTH 2 /* LDO3_HWC_MODE - [9:8] */ +#define WM831X_LDO3_FLT 0x0080 /* LDO3_FLT */ +#define WM831X_LDO3_FLT_MASK 0x0080 /* LDO3_FLT */ +#define WM831X_LDO3_FLT_SHIFT 7 /* LDO3_FLT */ +#define WM831X_LDO3_FLT_WIDTH 1 /* LDO3_FLT */ +#define WM831X_LDO3_SWI 0x0040 /* LDO3_SWI */ +#define WM831X_LDO3_SWI_MASK 0x0040 /* LDO3_SWI */ +#define WM831X_LDO3_SWI_SHIFT 6 /* LDO3_SWI */ +#define WM831X_LDO3_SWI_WIDTH 1 /* LDO3_SWI */ +#define WM831X_LDO3_LP_MODE 0x0001 /* LDO3_LP_MODE */ +#define WM831X_LDO3_LP_MODE_MASK 0x0001 /* LDO3_LP_MODE */ +#define WM831X_LDO3_LP_MODE_SHIFT 0 /* LDO3_LP_MODE */ +#define WM831X_LDO3_LP_MODE_WIDTH 1 /* LDO3_LP_MODE */ + +/* + * R16495 (0x406F) - LDO3 ON Control + */ +#define WM831X_LDO3_ON_SLOT_MASK 0xE000 /* LDO3_ON_SLOT - [15:13] */ +#define WM831X_LDO3_ON_SLOT_SHIFT 13 /* LDO3_ON_SLOT - [15:13] */ +#define WM831X_LDO3_ON_SLOT_WIDTH 3 /* LDO3_ON_SLOT - [15:13] */ +#define WM831X_LDO3_ON_MODE 0x0100 /* LDO3_ON_MODE */ +#define WM831X_LDO3_ON_MODE_MASK 0x0100 /* LDO3_ON_MODE */ +#define WM831X_LDO3_ON_MODE_SHIFT 8 /* LDO3_ON_MODE */ +#define WM831X_LDO3_ON_MODE_WIDTH 1 /* LDO3_ON_MODE */ +#define WM831X_LDO3_ON_VSEL_MASK 0x001F /* LDO3_ON_VSEL - [4:0] */ +#define WM831X_LDO3_ON_VSEL_SHIFT 0 /* LDO3_ON_VSEL - [4:0] */ +#define WM831X_LDO3_ON_VSEL_WIDTH 5 /* LDO3_ON_VSEL - [4:0] */ + +/* + * R16496 (0x4070) - LDO3 SLEEP Control + */ +#define WM831X_LDO3_SLP_SLOT_MASK 0xE000 /* LDO3_SLP_SLOT - [15:13] */ +#define WM831X_LDO3_SLP_SLOT_SHIFT 13 /* LDO3_SLP_SLOT - [15:13] */ +#define WM831X_LDO3_SLP_SLOT_WIDTH 3 /* LDO3_SLP_SLOT - [15:13] */ +#define WM831X_LDO3_SLP_MODE 0x0100 /* LDO3_SLP_MODE */ +#define WM831X_LDO3_SLP_MODE_MASK 0x0100 /* LDO3_SLP_MODE */ +#define WM831X_LDO3_SLP_MODE_SHIFT 8 /* LDO3_SLP_MODE */ +#define WM831X_LDO3_SLP_MODE_WIDTH 1 /* LDO3_SLP_MODE */ +#define WM831X_LDO3_SLP_VSEL_MASK 0x001F /* LDO3_SLP_VSEL - [4:0] */ +#define WM831X_LDO3_SLP_VSEL_SHIFT 0 /* LDO3_SLP_VSEL - [4:0] */ +#define WM831X_LDO3_SLP_VSEL_WIDTH 5 /* LDO3_SLP_VSEL - [4:0] */ + +/* + * R16497 (0x4071) - LDO4 Control + */ +#define WM831X_LDO4_ERR_ACT_MASK 0xC000 /* LDO4_ERR_ACT - [15:14] */ +#define WM831X_LDO4_ERR_ACT_SHIFT 14 /* LDO4_ERR_ACT - [15:14] */ +#define WM831X_LDO4_ERR_ACT_WIDTH 2 /* LDO4_ERR_ACT - [15:14] */ +#define WM831X_LDO4_HWC_SRC_MASK 0x1800 /* LDO4_HWC_SRC - [12:11] */ +#define WM831X_LDO4_HWC_SRC_SHIFT 11 /* LDO4_HWC_SRC - [12:11] */ +#define WM831X_LDO4_HWC_SRC_WIDTH 2 /* LDO4_HWC_SRC - [12:11] */ +#define WM831X_LDO4_HWC_VSEL 0x0400 /* LDO4_HWC_VSEL */ +#define WM831X_LDO4_HWC_VSEL_MASK 0x0400 /* LDO4_HWC_VSEL */ +#define WM831X_LDO4_HWC_VSEL_SHIFT 10 /* LDO4_HWC_VSEL */ +#define WM831X_LDO4_HWC_VSEL_WIDTH 1 /* LDO4_HWC_VSEL */ +#define WM831X_LDO4_HWC_MODE_MASK 0x0300 /* LDO4_HWC_MODE - [9:8] */ +#define WM831X_LDO4_HWC_MODE_SHIFT 8 /* LDO4_HWC_MODE - [9:8] */ +#define WM831X_LDO4_HWC_MODE_WIDTH 2 /* LDO4_HWC_MODE - [9:8] */ +#define WM831X_LDO4_FLT 0x0080 /* LDO4_FLT */ +#define WM831X_LDO4_FLT_MASK 0x0080 /* LDO4_FLT */ +#define WM831X_LDO4_FLT_SHIFT 7 /* LDO4_FLT */ +#define WM831X_LDO4_FLT_WIDTH 1 /* LDO4_FLT */ +#define WM831X_LDO4_SWI 0x0040 /* LDO4_SWI */ +#define WM831X_LDO4_SWI_MASK 0x0040 /* LDO4_SWI */ +#define WM831X_LDO4_SWI_SHIFT 6 /* LDO4_SWI */ +#define WM831X_LDO4_SWI_WIDTH 1 /* LDO4_SWI */ +#define WM831X_LDO4_LP_MODE 0x0001 /* LDO4_LP_MODE */ +#define WM831X_LDO4_LP_MODE_MASK 0x0001 /* LDO4_LP_MODE */ +#define WM831X_LDO4_LP_MODE_SHIFT 0 /* LDO4_LP_MODE */ +#define WM831X_LDO4_LP_MODE_WIDTH 1 /* LDO4_LP_MODE */ + +/* + * R16498 (0x4072) - LDO4 ON Control + */ +#define WM831X_LDO4_ON_SLOT_MASK 0xE000 /* LDO4_ON_SLOT - [15:13] */ +#define WM831X_LDO4_ON_SLOT_SHIFT 13 /* LDO4_ON_SLOT - [15:13] */ +#define WM831X_LDO4_ON_SLOT_WIDTH 3 /* LDO4_ON_SLOT - [15:13] */ +#define WM831X_LDO4_ON_MODE 0x0100 /* LDO4_ON_MODE */ +#define WM831X_LDO4_ON_MODE_MASK 0x0100 /* LDO4_ON_MODE */ +#define WM831X_LDO4_ON_MODE_SHIFT 8 /* LDO4_ON_MODE */ +#define WM831X_LDO4_ON_MODE_WIDTH 1 /* LDO4_ON_MODE */ +#define WM831X_LDO4_ON_VSEL_MASK 0x001F /* LDO4_ON_VSEL - [4:0] */ +#define WM831X_LDO4_ON_VSEL_SHIFT 0 /* LDO4_ON_VSEL - [4:0] */ +#define WM831X_LDO4_ON_VSEL_WIDTH 5 /* LDO4_ON_VSEL - [4:0] */ + +/* + * R16499 (0x4073) - LDO4 SLEEP Control + */ +#define WM831X_LDO4_SLP_SLOT_MASK 0xE000 /* LDO4_SLP_SLOT - [15:13] */ +#define WM831X_LDO4_SLP_SLOT_SHIFT 13 /* LDO4_SLP_SLOT - [15:13] */ +#define WM831X_LDO4_SLP_SLOT_WIDTH 3 /* LDO4_SLP_SLOT - [15:13] */ +#define WM831X_LDO4_SLP_MODE 0x0100 /* LDO4_SLP_MODE */ +#define WM831X_LDO4_SLP_MODE_MASK 0x0100 /* LDO4_SLP_MODE */ +#define WM831X_LDO4_SLP_MODE_SHIFT 8 /* LDO4_SLP_MODE */ +#define WM831X_LDO4_SLP_MODE_WIDTH 1 /* LDO4_SLP_MODE */ +#define WM831X_LDO4_SLP_VSEL_MASK 0x001F /* LDO4_SLP_VSEL - [4:0] */ +#define WM831X_LDO4_SLP_VSEL_SHIFT 0 /* LDO4_SLP_VSEL - [4:0] */ +#define WM831X_LDO4_SLP_VSEL_WIDTH 5 /* LDO4_SLP_VSEL - [4:0] */ + +/* + * R16500 (0x4074) - LDO5 Control + */ +#define WM831X_LDO5_ERR_ACT_MASK 0xC000 /* LDO5_ERR_ACT - [15:14] */ +#define WM831X_LDO5_ERR_ACT_SHIFT 14 /* LDO5_ERR_ACT - [15:14] */ +#define WM831X_LDO5_ERR_ACT_WIDTH 2 /* LDO5_ERR_ACT - [15:14] */ +#define WM831X_LDO5_HWC_SRC_MASK 0x1800 /* LDO5_HWC_SRC - [12:11] */ +#define WM831X_LDO5_HWC_SRC_SHIFT 11 /* LDO5_HWC_SRC - [12:11] */ +#define WM831X_LDO5_HWC_SRC_WIDTH 2 /* LDO5_HWC_SRC - [12:11] */ +#define WM831X_LDO5_HWC_VSEL 0x0400 /* LDO5_HWC_VSEL */ +#define WM831X_LDO5_HWC_VSEL_MASK 0x0400 /* LDO5_HWC_VSEL */ +#define WM831X_LDO5_HWC_VSEL_SHIFT 10 /* LDO5_HWC_VSEL */ +#define WM831X_LDO5_HWC_VSEL_WIDTH 1 /* LDO5_HWC_VSEL */ +#define WM831X_LDO5_HWC_MODE_MASK 0x0300 /* LDO5_HWC_MODE - [9:8] */ +#define WM831X_LDO5_HWC_MODE_SHIFT 8 /* LDO5_HWC_MODE - [9:8] */ +#define WM831X_LDO5_HWC_MODE_WIDTH 2 /* LDO5_HWC_MODE - [9:8] */ +#define WM831X_LDO5_FLT 0x0080 /* LDO5_FLT */ +#define WM831X_LDO5_FLT_MASK 0x0080 /* LDO5_FLT */ +#define WM831X_LDO5_FLT_SHIFT 7 /* LDO5_FLT */ +#define WM831X_LDO5_FLT_WIDTH 1 /* LDO5_FLT */ +#define WM831X_LDO5_SWI 0x0040 /* LDO5_SWI */ +#define WM831X_LDO5_SWI_MASK 0x0040 /* LDO5_SWI */ +#define WM831X_LDO5_SWI_SHIFT 6 /* LDO5_SWI */ +#define WM831X_LDO5_SWI_WIDTH 1 /* LDO5_SWI */ +#define WM831X_LDO5_LP_MODE 0x0001 /* LDO5_LP_MODE */ +#define WM831X_LDO5_LP_MODE_MASK 0x0001 /* LDO5_LP_MODE */ +#define WM831X_LDO5_LP_MODE_SHIFT 0 /* LDO5_LP_MODE */ +#define WM831X_LDO5_LP_MODE_WIDTH 1 /* LDO5_LP_MODE */ + +/* + * R16501 (0x4075) - LDO5 ON Control + */ +#define WM831X_LDO5_ON_SLOT_MASK 0xE000 /* LDO5_ON_SLOT - [15:13] */ +#define WM831X_LDO5_ON_SLOT_SHIFT 13 /* LDO5_ON_SLOT - [15:13] */ +#define WM831X_LDO5_ON_SLOT_WIDTH 3 /* LDO5_ON_SLOT - [15:13] */ +#define WM831X_LDO5_ON_MODE 0x0100 /* LDO5_ON_MODE */ +#define WM831X_LDO5_ON_MODE_MASK 0x0100 /* LDO5_ON_MODE */ +#define WM831X_LDO5_ON_MODE_SHIFT 8 /* LDO5_ON_MODE */ +#define WM831X_LDO5_ON_MODE_WIDTH 1 /* LDO5_ON_MODE */ +#define WM831X_LDO5_ON_VSEL_MASK 0x001F /* LDO5_ON_VSEL - [4:0] */ +#define WM831X_LDO5_ON_VSEL_SHIFT 0 /* LDO5_ON_VSEL - [4:0] */ +#define WM831X_LDO5_ON_VSEL_WIDTH 5 /* LDO5_ON_VSEL - [4:0] */ + +/* + * R16502 (0x4076) - LDO5 SLEEP Control + */ +#define WM831X_LDO5_SLP_SLOT_MASK 0xE000 /* LDO5_SLP_SLOT - [15:13] */ +#define WM831X_LDO5_SLP_SLOT_SHIFT 13 /* LDO5_SLP_SLOT - [15:13] */ +#define WM831X_LDO5_SLP_SLOT_WIDTH 3 /* LDO5_SLP_SLOT - [15:13] */ +#define WM831X_LDO5_SLP_MODE 0x0100 /* LDO5_SLP_MODE */ +#define WM831X_LDO5_SLP_MODE_MASK 0x0100 /* LDO5_SLP_MODE */ +#define WM831X_LDO5_SLP_MODE_SHIFT 8 /* LDO5_SLP_MODE */ +#define WM831X_LDO5_SLP_MODE_WIDTH 1 /* LDO5_SLP_MODE */ +#define WM831X_LDO5_SLP_VSEL_MASK 0x001F /* LDO5_SLP_VSEL - [4:0] */ +#define WM831X_LDO5_SLP_VSEL_SHIFT 0 /* LDO5_SLP_VSEL - [4:0] */ +#define WM831X_LDO5_SLP_VSEL_WIDTH 5 /* LDO5_SLP_VSEL - [4:0] */ + +/* + * R16503 (0x4077) - LDO6 Control + */ +#define WM831X_LDO6_ERR_ACT_MASK 0xC000 /* LDO6_ERR_ACT - [15:14] */ +#define WM831X_LDO6_ERR_ACT_SHIFT 14 /* LDO6_ERR_ACT - [15:14] */ +#define WM831X_LDO6_ERR_ACT_WIDTH 2 /* LDO6_ERR_ACT - [15:14] */ +#define WM831X_LDO6_HWC_SRC_MASK 0x1800 /* LDO6_HWC_SRC - [12:11] */ +#define WM831X_LDO6_HWC_SRC_SHIFT 11 /* LDO6_HWC_SRC - [12:11] */ +#define WM831X_LDO6_HWC_SRC_WIDTH 2 /* LDO6_HWC_SRC - [12:11] */ +#define WM831X_LDO6_HWC_VSEL 0x0400 /* LDO6_HWC_VSEL */ +#define WM831X_LDO6_HWC_VSEL_MASK 0x0400 /* LDO6_HWC_VSEL */ +#define WM831X_LDO6_HWC_VSEL_SHIFT 10 /* LDO6_HWC_VSEL */ +#define WM831X_LDO6_HWC_VSEL_WIDTH 1 /* LDO6_HWC_VSEL */ +#define WM831X_LDO6_HWC_MODE_MASK 0x0300 /* LDO6_HWC_MODE - [9:8] */ +#define WM831X_LDO6_HWC_MODE_SHIFT 8 /* LDO6_HWC_MODE - [9:8] */ +#define WM831X_LDO6_HWC_MODE_WIDTH 2 /* LDO6_HWC_MODE - [9:8] */ +#define WM831X_LDO6_FLT 0x0080 /* LDO6_FLT */ +#define WM831X_LDO6_FLT_MASK 0x0080 /* LDO6_FLT */ +#define WM831X_LDO6_FLT_SHIFT 7 /* LDO6_FLT */ +#define WM831X_LDO6_FLT_WIDTH 1 /* LDO6_FLT */ +#define WM831X_LDO6_SWI 0x0040 /* LDO6_SWI */ +#define WM831X_LDO6_SWI_MASK 0x0040 /* LDO6_SWI */ +#define WM831X_LDO6_SWI_SHIFT 6 /* LDO6_SWI */ +#define WM831X_LDO6_SWI_WIDTH 1 /* LDO6_SWI */ +#define WM831X_LDO6_LP_MODE 0x0001 /* LDO6_LP_MODE */ +#define WM831X_LDO6_LP_MODE_MASK 0x0001 /* LDO6_LP_MODE */ +#define WM831X_LDO6_LP_MODE_SHIFT 0 /* LDO6_LP_MODE */ +#define WM831X_LDO6_LP_MODE_WIDTH 1 /* LDO6_LP_MODE */ + +/* + * R16504 (0x4078) - LDO6 ON Control + */ +#define WM831X_LDO6_ON_SLOT_MASK 0xE000 /* LDO6_ON_SLOT - [15:13] */ +#define WM831X_LDO6_ON_SLOT_SHIFT 13 /* LDO6_ON_SLOT - [15:13] */ +#define WM831X_LDO6_ON_SLOT_WIDTH 3 /* LDO6_ON_SLOT - [15:13] */ +#define WM831X_LDO6_ON_MODE 0x0100 /* LDO6_ON_MODE */ +#define WM831X_LDO6_ON_MODE_MASK 0x0100 /* LDO6_ON_MODE */ +#define WM831X_LDO6_ON_MODE_SHIFT 8 /* LDO6_ON_MODE */ +#define WM831X_LDO6_ON_MODE_WIDTH 1 /* LDO6_ON_MODE */ +#define WM831X_LDO6_ON_VSEL_MASK 0x001F /* LDO6_ON_VSEL - [4:0] */ +#define WM831X_LDO6_ON_VSEL_SHIFT 0 /* LDO6_ON_VSEL - [4:0] */ +#define WM831X_LDO6_ON_VSEL_WIDTH 5 /* LDO6_ON_VSEL - [4:0] */ + +/* + * R16505 (0x4079) - LDO6 SLEEP Control + */ +#define WM831X_LDO6_SLP_SLOT_MASK 0xE000 /* LDO6_SLP_SLOT - [15:13] */ +#define WM831X_LDO6_SLP_SLOT_SHIFT 13 /* LDO6_SLP_SLOT - [15:13] */ +#define WM831X_LDO6_SLP_SLOT_WIDTH 3 /* LDO6_SLP_SLOT - [15:13] */ +#define WM831X_LDO6_SLP_MODE 0x0100 /* LDO6_SLP_MODE */ +#define WM831X_LDO6_SLP_MODE_MASK 0x0100 /* LDO6_SLP_MODE */ +#define WM831X_LDO6_SLP_MODE_SHIFT 8 /* LDO6_SLP_MODE */ +#define WM831X_LDO6_SLP_MODE_WIDTH 1 /* LDO6_SLP_MODE */ +#define WM831X_LDO6_SLP_VSEL_MASK 0x001F /* LDO6_SLP_VSEL - [4:0] */ +#define WM831X_LDO6_SLP_VSEL_SHIFT 0 /* LDO6_SLP_VSEL - [4:0] */ +#define WM831X_LDO6_SLP_VSEL_WIDTH 5 /* LDO6_SLP_VSEL - [4:0] */ + +/* + * R16506 (0x407A) - LDO7 Control + */ +#define WM831X_LDO7_ERR_ACT_MASK 0xC000 /* LDO7_ERR_ACT - [15:14] */ +#define WM831X_LDO7_ERR_ACT_SHIFT 14 /* LDO7_ERR_ACT - [15:14] */ +#define WM831X_LDO7_ERR_ACT_WIDTH 2 /* LDO7_ERR_ACT - [15:14] */ +#define WM831X_LDO7_HWC_SRC_MASK 0x1800 /* LDO7_HWC_SRC - [12:11] */ +#define WM831X_LDO7_HWC_SRC_SHIFT 11 /* LDO7_HWC_SRC - [12:11] */ +#define WM831X_LDO7_HWC_SRC_WIDTH 2 /* LDO7_HWC_SRC - [12:11] */ +#define WM831X_LDO7_HWC_VSEL 0x0400 /* LDO7_HWC_VSEL */ +#define WM831X_LDO7_HWC_VSEL_MASK 0x0400 /* LDO7_HWC_VSEL */ +#define WM831X_LDO7_HWC_VSEL_SHIFT 10 /* LDO7_HWC_VSEL */ +#define WM831X_LDO7_HWC_VSEL_WIDTH 1 /* LDO7_HWC_VSEL */ +#define WM831X_LDO7_HWC_MODE_MASK 0x0300 /* LDO7_HWC_MODE - [9:8] */ +#define WM831X_LDO7_HWC_MODE_SHIFT 8 /* LDO7_HWC_MODE - [9:8] */ +#define WM831X_LDO7_HWC_MODE_WIDTH 2 /* LDO7_HWC_MODE - [9:8] */ +#define WM831X_LDO7_FLT 0x0080 /* LDO7_FLT */ +#define WM831X_LDO7_FLT_MASK 0x0080 /* LDO7_FLT */ +#define WM831X_LDO7_FLT_SHIFT 7 /* LDO7_FLT */ +#define WM831X_LDO7_FLT_WIDTH 1 /* LDO7_FLT */ +#define WM831X_LDO7_SWI 0x0040 /* LDO7_SWI */ +#define WM831X_LDO7_SWI_MASK 0x0040 /* LDO7_SWI */ +#define WM831X_LDO7_SWI_SHIFT 6 /* LDO7_SWI */ +#define WM831X_LDO7_SWI_WIDTH 1 /* LDO7_SWI */ + +/* + * R16507 (0x407B) - LDO7 ON Control + */ +#define WM831X_LDO7_ON_SLOT_MASK 0xE000 /* LDO7_ON_SLOT - [15:13] */ +#define WM831X_LDO7_ON_SLOT_SHIFT 13 /* LDO7_ON_SLOT - [15:13] */ +#define WM831X_LDO7_ON_SLOT_WIDTH 3 /* LDO7_ON_SLOT - [15:13] */ +#define WM831X_LDO7_ON_MODE 0x0100 /* LDO7_ON_MODE */ +#define WM831X_LDO7_ON_MODE_MASK 0x0100 /* LDO7_ON_MODE */ +#define WM831X_LDO7_ON_MODE_SHIFT 8 /* LDO7_ON_MODE */ +#define WM831X_LDO7_ON_MODE_WIDTH 1 /* LDO7_ON_MODE */ +#define WM831X_LDO7_ON_VSEL_MASK 0x001F /* LDO7_ON_VSEL - [4:0] */ +#define WM831X_LDO7_ON_VSEL_SHIFT 0 /* LDO7_ON_VSEL - [4:0] */ +#define WM831X_LDO7_ON_VSEL_WIDTH 5 /* LDO7_ON_VSEL - [4:0] */ + +/* + * R16508 (0x407C) - LDO7 SLEEP Control + */ +#define WM831X_LDO7_SLP_SLOT_MASK 0xE000 /* LDO7_SLP_SLOT - [15:13] */ +#define WM831X_LDO7_SLP_SLOT_SHIFT 13 /* LDO7_SLP_SLOT - [15:13] */ +#define WM831X_LDO7_SLP_SLOT_WIDTH 3 /* LDO7_SLP_SLOT - [15:13] */ +#define WM831X_LDO7_SLP_MODE 0x0100 /* LDO7_SLP_MODE */ +#define WM831X_LDO7_SLP_MODE_MASK 0x0100 /* LDO7_SLP_MODE */ +#define WM831X_LDO7_SLP_MODE_SHIFT 8 /* LDO7_SLP_MODE */ +#define WM831X_LDO7_SLP_MODE_WIDTH 1 /* LDO7_SLP_MODE */ +#define WM831X_LDO7_SLP_VSEL_MASK 0x001F /* LDO7_SLP_VSEL - [4:0] */ +#define WM831X_LDO7_SLP_VSEL_SHIFT 0 /* LDO7_SLP_VSEL - [4:0] */ +#define WM831X_LDO7_SLP_VSEL_WIDTH 5 /* LDO7_SLP_VSEL - [4:0] */ + +/* + * R16509 (0x407D) - LDO8 Control + */ +#define WM831X_LDO8_ERR_ACT_MASK 0xC000 /* LDO8_ERR_ACT - [15:14] */ +#define WM831X_LDO8_ERR_ACT_SHIFT 14 /* LDO8_ERR_ACT - [15:14] */ +#define WM831X_LDO8_ERR_ACT_WIDTH 2 /* LDO8_ERR_ACT - [15:14] */ +#define WM831X_LDO8_HWC_SRC_MASK 0x1800 /* LDO8_HWC_SRC - [12:11] */ +#define WM831X_LDO8_HWC_SRC_SHIFT 11 /* LDO8_HWC_SRC - [12:11] */ +#define WM831X_LDO8_HWC_SRC_WIDTH 2 /* LDO8_HWC_SRC - [12:11] */ +#define WM831X_LDO8_HWC_VSEL 0x0400 /* LDO8_HWC_VSEL */ +#define WM831X_LDO8_HWC_VSEL_MASK 0x0400 /* LDO8_HWC_VSEL */ +#define WM831X_LDO8_HWC_VSEL_SHIFT 10 /* LDO8_HWC_VSEL */ +#define WM831X_LDO8_HWC_VSEL_WIDTH 1 /* LDO8_HWC_VSEL */ +#define WM831X_LDO8_HWC_MODE_MASK 0x0300 /* LDO8_HWC_MODE - [9:8] */ +#define WM831X_LDO8_HWC_MODE_SHIFT 8 /* LDO8_HWC_MODE - [9:8] */ +#define WM831X_LDO8_HWC_MODE_WIDTH 2 /* LDO8_HWC_MODE - [9:8] */ +#define WM831X_LDO8_FLT 0x0080 /* LDO8_FLT */ +#define WM831X_LDO8_FLT_MASK 0x0080 /* LDO8_FLT */ +#define WM831X_LDO8_FLT_SHIFT 7 /* LDO8_FLT */ +#define WM831X_LDO8_FLT_WIDTH 1 /* LDO8_FLT */ +#define WM831X_LDO8_SWI 0x0040 /* LDO8_SWI */ +#define WM831X_LDO8_SWI_MASK 0x0040 /* LDO8_SWI */ +#define WM831X_LDO8_SWI_SHIFT 6 /* LDO8_SWI */ +#define WM831X_LDO8_SWI_WIDTH 1 /* LDO8_SWI */ + +/* + * R16510 (0x407E) - LDO8 ON Control + */ +#define WM831X_LDO8_ON_SLOT_MASK 0xE000 /* LDO8_ON_SLOT - [15:13] */ +#define WM831X_LDO8_ON_SLOT_SHIFT 13 /* LDO8_ON_SLOT - [15:13] */ +#define WM831X_LDO8_ON_SLOT_WIDTH 3 /* LDO8_ON_SLOT - [15:13] */ +#define WM831X_LDO8_ON_MODE 0x0100 /* LDO8_ON_MODE */ +#define WM831X_LDO8_ON_MODE_MASK 0x0100 /* LDO8_ON_MODE */ +#define WM831X_LDO8_ON_MODE_SHIFT 8 /* LDO8_ON_MODE */ +#define WM831X_LDO8_ON_MODE_WIDTH 1 /* LDO8_ON_MODE */ +#define WM831X_LDO8_ON_VSEL_MASK 0x001F /* LDO8_ON_VSEL - [4:0] */ +#define WM831X_LDO8_ON_VSEL_SHIFT 0 /* LDO8_ON_VSEL - [4:0] */ +#define WM831X_LDO8_ON_VSEL_WIDTH 5 /* LDO8_ON_VSEL - [4:0] */ + +/* + * R16511 (0x407F) - LDO8 SLEEP Control + */ +#define WM831X_LDO8_SLP_SLOT_MASK 0xE000 /* LDO8_SLP_SLOT - [15:13] */ +#define WM831X_LDO8_SLP_SLOT_SHIFT 13 /* LDO8_SLP_SLOT - [15:13] */ +#define WM831X_LDO8_SLP_SLOT_WIDTH 3 /* LDO8_SLP_SLOT - [15:13] */ +#define WM831X_LDO8_SLP_MODE 0x0100 /* LDO8_SLP_MODE */ +#define WM831X_LDO8_SLP_MODE_MASK 0x0100 /* LDO8_SLP_MODE */ +#define WM831X_LDO8_SLP_MODE_SHIFT 8 /* LDO8_SLP_MODE */ +#define WM831X_LDO8_SLP_MODE_WIDTH 1 /* LDO8_SLP_MODE */ +#define WM831X_LDO8_SLP_VSEL_MASK 0x001F /* LDO8_SLP_VSEL - [4:0] */ +#define WM831X_LDO8_SLP_VSEL_SHIFT 0 /* LDO8_SLP_VSEL - [4:0] */ +#define WM831X_LDO8_SLP_VSEL_WIDTH 5 /* LDO8_SLP_VSEL - [4:0] */ + +/* + * R16512 (0x4080) - LDO9 Control + */ +#define WM831X_LDO9_ERR_ACT_MASK 0xC000 /* LDO9_ERR_ACT - [15:14] */ +#define WM831X_LDO9_ERR_ACT_SHIFT 14 /* LDO9_ERR_ACT - [15:14] */ +#define WM831X_LDO9_ERR_ACT_WIDTH 2 /* LDO9_ERR_ACT - [15:14] */ +#define WM831X_LDO9_HWC_SRC_MASK 0x1800 /* LDO9_HWC_SRC - [12:11] */ +#define WM831X_LDO9_HWC_SRC_SHIFT 11 /* LDO9_HWC_SRC - [12:11] */ +#define WM831X_LDO9_HWC_SRC_WIDTH 2 /* LDO9_HWC_SRC - [12:11] */ +#define WM831X_LDO9_HWC_VSEL 0x0400 /* LDO9_HWC_VSEL */ +#define WM831X_LDO9_HWC_VSEL_MASK 0x0400 /* LDO9_HWC_VSEL */ +#define WM831X_LDO9_HWC_VSEL_SHIFT 10 /* LDO9_HWC_VSEL */ +#define WM831X_LDO9_HWC_VSEL_WIDTH 1 /* LDO9_HWC_VSEL */ +#define WM831X_LDO9_HWC_MODE_MASK 0x0300 /* LDO9_HWC_MODE - [9:8] */ +#define WM831X_LDO9_HWC_MODE_SHIFT 8 /* LDO9_HWC_MODE - [9:8] */ +#define WM831X_LDO9_HWC_MODE_WIDTH 2 /* LDO9_HWC_MODE - [9:8] */ +#define WM831X_LDO9_FLT 0x0080 /* LDO9_FLT */ +#define WM831X_LDO9_FLT_MASK 0x0080 /* LDO9_FLT */ +#define WM831X_LDO9_FLT_SHIFT 7 /* LDO9_FLT */ +#define WM831X_LDO9_FLT_WIDTH 1 /* LDO9_FLT */ +#define WM831X_LDO9_SWI 0x0040 /* LDO9_SWI */ +#define WM831X_LDO9_SWI_MASK 0x0040 /* LDO9_SWI */ +#define WM831X_LDO9_SWI_SHIFT 6 /* LDO9_SWI */ +#define WM831X_LDO9_SWI_WIDTH 1 /* LDO9_SWI */ + +/* + * R16513 (0x4081) - LDO9 ON Control + */ +#define WM831X_LDO9_ON_SLOT_MASK 0xE000 /* LDO9_ON_SLOT - [15:13] */ +#define WM831X_LDO9_ON_SLOT_SHIFT 13 /* LDO9_ON_SLOT - [15:13] */ +#define WM831X_LDO9_ON_SLOT_WIDTH 3 /* LDO9_ON_SLOT - [15:13] */ +#define WM831X_LDO9_ON_MODE 0x0100 /* LDO9_ON_MODE */ +#define WM831X_LDO9_ON_MODE_MASK 0x0100 /* LDO9_ON_MODE */ +#define WM831X_LDO9_ON_MODE_SHIFT 8 /* LDO9_ON_MODE */ +#define WM831X_LDO9_ON_MODE_WIDTH 1 /* LDO9_ON_MODE */ +#define WM831X_LDO9_ON_VSEL_MASK 0x001F /* LDO9_ON_VSEL - [4:0] */ +#define WM831X_LDO9_ON_VSEL_SHIFT 0 /* LDO9_ON_VSEL - [4:0] */ +#define WM831X_LDO9_ON_VSEL_WIDTH 5 /* LDO9_ON_VSEL - [4:0] */ + +/* + * R16514 (0x4082) - LDO9 SLEEP Control + */ +#define WM831X_LDO9_SLP_SLOT_MASK 0xE000 /* LDO9_SLP_SLOT - [15:13] */ +#define WM831X_LDO9_SLP_SLOT_SHIFT 13 /* LDO9_SLP_SLOT - [15:13] */ +#define WM831X_LDO9_SLP_SLOT_WIDTH 3 /* LDO9_SLP_SLOT - [15:13] */ +#define WM831X_LDO9_SLP_MODE 0x0100 /* LDO9_SLP_MODE */ +#define WM831X_LDO9_SLP_MODE_MASK 0x0100 /* LDO9_SLP_MODE */ +#define WM831X_LDO9_SLP_MODE_SHIFT 8 /* LDO9_SLP_MODE */ +#define WM831X_LDO9_SLP_MODE_WIDTH 1 /* LDO9_SLP_MODE */ +#define WM831X_LDO9_SLP_VSEL_MASK 0x001F /* LDO9_SLP_VSEL - [4:0] */ +#define WM831X_LDO9_SLP_VSEL_SHIFT 0 /* LDO9_SLP_VSEL - [4:0] */ +#define WM831X_LDO9_SLP_VSEL_WIDTH 5 /* LDO9_SLP_VSEL - [4:0] */ + +/* + * R16515 (0x4083) - LDO10 Control + */ +#define WM831X_LDO10_ERR_ACT_MASK 0xC000 /* LDO10_ERR_ACT - [15:14] */ +#define WM831X_LDO10_ERR_ACT_SHIFT 14 /* LDO10_ERR_ACT - [15:14] */ +#define WM831X_LDO10_ERR_ACT_WIDTH 2 /* LDO10_ERR_ACT - [15:14] */ +#define WM831X_LDO10_HWC_SRC_MASK 0x1800 /* LDO10_HWC_SRC - [12:11] */ +#define WM831X_LDO10_HWC_SRC_SHIFT 11 /* LDO10_HWC_SRC - [12:11] */ +#define WM831X_LDO10_HWC_SRC_WIDTH 2 /* LDO10_HWC_SRC - [12:11] */ +#define WM831X_LDO10_HWC_VSEL 0x0400 /* LDO10_HWC_VSEL */ +#define WM831X_LDO10_HWC_VSEL_MASK 0x0400 /* LDO10_HWC_VSEL */ +#define WM831X_LDO10_HWC_VSEL_SHIFT 10 /* LDO10_HWC_VSEL */ +#define WM831X_LDO10_HWC_VSEL_WIDTH 1 /* LDO10_HWC_VSEL */ +#define WM831X_LDO10_HWC_MODE_MASK 0x0300 /* LDO10_HWC_MODE - [9:8] */ +#define WM831X_LDO10_HWC_MODE_SHIFT 8 /* LDO10_HWC_MODE - [9:8] */ +#define WM831X_LDO10_HWC_MODE_WIDTH 2 /* LDO10_HWC_MODE - [9:8] */ +#define WM831X_LDO10_FLT 0x0080 /* LDO10_FLT */ +#define WM831X_LDO10_FLT_MASK 0x0080 /* LDO10_FLT */ +#define WM831X_LDO10_FLT_SHIFT 7 /* LDO10_FLT */ +#define WM831X_LDO10_FLT_WIDTH 1 /* LDO10_FLT */ +#define WM831X_LDO10_SWI 0x0040 /* LDO10_SWI */ +#define WM831X_LDO10_SWI_MASK 0x0040 /* LDO10_SWI */ +#define WM831X_LDO10_SWI_SHIFT 6 /* LDO10_SWI */ +#define WM831X_LDO10_SWI_WIDTH 1 /* LDO10_SWI */ + +/* + * R16516 (0x4084) - LDO10 ON Control + */ +#define WM831X_LDO10_ON_SLOT_MASK 0xE000 /* LDO10_ON_SLOT - [15:13] */ +#define WM831X_LDO10_ON_SLOT_SHIFT 13 /* LDO10_ON_SLOT - [15:13] */ +#define WM831X_LDO10_ON_SLOT_WIDTH 3 /* LDO10_ON_SLOT - [15:13] */ +#define WM831X_LDO10_ON_MODE 0x0100 /* LDO10_ON_MODE */ +#define WM831X_LDO10_ON_MODE_MASK 0x0100 /* LDO10_ON_MODE */ +#define WM831X_LDO10_ON_MODE_SHIFT 8 /* LDO10_ON_MODE */ +#define WM831X_LDO10_ON_MODE_WIDTH 1 /* LDO10_ON_MODE */ +#define WM831X_LDO10_ON_VSEL_MASK 0x001F /* LDO10_ON_VSEL - [4:0] */ +#define WM831X_LDO10_ON_VSEL_SHIFT 0 /* LDO10_ON_VSEL - [4:0] */ +#define WM831X_LDO10_ON_VSEL_WIDTH 5 /* LDO10_ON_VSEL - [4:0] */ + +/* + * R16517 (0x4085) - LDO10 SLEEP Control + */ +#define WM831X_LDO10_SLP_SLOT_MASK 0xE000 /* LDO10_SLP_SLOT - [15:13] */ +#define WM831X_LDO10_SLP_SLOT_SHIFT 13 /* LDO10_SLP_SLOT - [15:13] */ +#define WM831X_LDO10_SLP_SLOT_WIDTH 3 /* LDO10_SLP_SLOT - [15:13] */ +#define WM831X_LDO10_SLP_MODE 0x0100 /* LDO10_SLP_MODE */ +#define WM831X_LDO10_SLP_MODE_MASK 0x0100 /* LDO10_SLP_MODE */ +#define WM831X_LDO10_SLP_MODE_SHIFT 8 /* LDO10_SLP_MODE */ +#define WM831X_LDO10_SLP_MODE_WIDTH 1 /* LDO10_SLP_MODE */ +#define WM831X_LDO10_SLP_VSEL_MASK 0x001F /* LDO10_SLP_VSEL - [4:0] */ +#define WM831X_LDO10_SLP_VSEL_SHIFT 0 /* LDO10_SLP_VSEL - [4:0] */ +#define WM831X_LDO10_SLP_VSEL_WIDTH 5 /* LDO10_SLP_VSEL - [4:0] */ + +/* + * R16519 (0x4087) - LDO11 ON Control + */ +#define WM831X_LDO11_ON_SLOT_MASK 0xE000 /* LDO11_ON_SLOT - [15:13] */ +#define WM831X_LDO11_ON_SLOT_SHIFT 13 /* LDO11_ON_SLOT - [15:13] */ +#define WM831X_LDO11_ON_SLOT_WIDTH 3 /* LDO11_ON_SLOT - [15:13] */ +#define WM831X_LDO11_OFFENA 0x1000 /* LDO11_OFFENA */ +#define WM831X_LDO11_OFFENA_MASK 0x1000 /* LDO11_OFFENA */ +#define WM831X_LDO11_OFFENA_SHIFT 12 /* LDO11_OFFENA */ +#define WM831X_LDO11_OFFENA_WIDTH 1 /* LDO11_OFFENA */ +#define WM831X_LDO11_VSEL_SRC 0x0080 /* LDO11_VSEL_SRC */ +#define WM831X_LDO11_VSEL_SRC_MASK 0x0080 /* LDO11_VSEL_SRC */ +#define WM831X_LDO11_VSEL_SRC_SHIFT 7 /* LDO11_VSEL_SRC */ +#define WM831X_LDO11_VSEL_SRC_WIDTH 1 /* LDO11_VSEL_SRC */ +#define WM831X_LDO11_ON_VSEL_MASK 0x000F /* LDO11_ON_VSEL - [3:0] */ +#define WM831X_LDO11_ON_VSEL_SHIFT 0 /* LDO11_ON_VSEL - [3:0] */ +#define WM831X_LDO11_ON_VSEL_WIDTH 4 /* LDO11_ON_VSEL - [3:0] */ + +/* + * R16520 (0x4088) - LDO11 SLEEP Control + */ +#define WM831X_LDO11_SLP_SLOT_MASK 0xE000 /* LDO11_SLP_SLOT - [15:13] */ +#define WM831X_LDO11_SLP_SLOT_SHIFT 13 /* LDO11_SLP_SLOT - [15:13] */ +#define WM831X_LDO11_SLP_SLOT_WIDTH 3 /* LDO11_SLP_SLOT - [15:13] */ +#define WM831X_LDO11_SLP_VSEL_MASK 0x000F /* LDO11_SLP_VSEL - [3:0] */ +#define WM831X_LDO11_SLP_VSEL_SHIFT 0 /* LDO11_SLP_VSEL - [3:0] */ +#define WM831X_LDO11_SLP_VSEL_WIDTH 4 /* LDO11_SLP_VSEL - [3:0] */ + /* * R16526 (0x408E) - Power Good Source 1 */ @@ -586,6 +1168,50 @@ #define WM831X_DC1_OK_SHIFT 0 /* DC1_OK */ #define WM831X_DC1_OK_WIDTH 1 /* DC1_OK */ +/* + * R16527 (0x408F) - Power Good Source 2 + */ +#define WM831X_LDO10_OK 0x0200 /* LDO10_OK */ +#define WM831X_LDO10_OK_MASK 0x0200 /* LDO10_OK */ +#define WM831X_LDO10_OK_SHIFT 9 /* LDO10_OK */ +#define WM831X_LDO10_OK_WIDTH 1 /* LDO10_OK */ +#define WM831X_LDO9_OK 0x0100 /* LDO9_OK */ +#define WM831X_LDO9_OK_MASK 0x0100 /* LDO9_OK */ +#define WM831X_LDO9_OK_SHIFT 8 /* LDO9_OK */ +#define WM831X_LDO9_OK_WIDTH 1 /* LDO9_OK */ +#define WM831X_LDO8_OK 0x0080 /* LDO8_OK */ +#define WM831X_LDO8_OK_MASK 0x0080 /* LDO8_OK */ +#define WM831X_LDO8_OK_SHIFT 7 /* LDO8_OK */ +#define WM831X_LDO8_OK_WIDTH 1 /* LDO8_OK */ +#define WM831X_LDO7_OK 0x0040 /* LDO7_OK */ +#define WM831X_LDO7_OK_MASK 0x0040 /* LDO7_OK */ +#define WM831X_LDO7_OK_SHIFT 6 /* LDO7_OK */ +#define WM831X_LDO7_OK_WIDTH 1 /* LDO7_OK */ +#define WM831X_LDO6_OK 0x0020 /* LDO6_OK */ +#define WM831X_LDO6_OK_MASK 0x0020 /* LDO6_OK */ +#define WM831X_LDO6_OK_SHIFT 5 /* LDO6_OK */ +#define WM831X_LDO6_OK_WIDTH 1 /* LDO6_OK */ +#define WM831X_LDO5_OK 0x0010 /* LDO5_OK */ +#define WM831X_LDO5_OK_MASK 0x0010 /* LDO5_OK */ +#define WM831X_LDO5_OK_SHIFT 4 /* LDO5_OK */ +#define WM831X_LDO5_OK_WIDTH 1 /* LDO5_OK */ +#define WM831X_LDO4_OK 0x0008 /* LDO4_OK */ +#define WM831X_LDO4_OK_MASK 0x0008 /* LDO4_OK */ +#define WM831X_LDO4_OK_SHIFT 3 /* LDO4_OK */ +#define WM831X_LDO4_OK_WIDTH 1 /* LDO4_OK */ +#define WM831X_LDO3_OK 0x0004 /* LDO3_OK */ +#define WM831X_LDO3_OK_MASK 0x0004 /* LDO3_OK */ +#define WM831X_LDO3_OK_SHIFT 2 /* LDO3_OK */ +#define WM831X_LDO3_OK_WIDTH 1 /* LDO3_OK */ +#define WM831X_LDO2_OK 0x0002 /* LDO2_OK */ +#define WM831X_LDO2_OK_MASK 0x0002 /* LDO2_OK */ +#define WM831X_LDO2_OK_SHIFT 1 /* LDO2_OK */ +#define WM831X_LDO2_OK_WIDTH 1 /* LDO2_OK */ +#define WM831X_LDO1_OK 0x0001 /* LDO1_OK */ +#define WM831X_LDO1_OK_MASK 0x0001 /* LDO1_OK */ +#define WM831X_LDO1_OK_SHIFT 0 /* LDO1_OK */ +#define WM831X_LDO1_OK_WIDTH 1 /* LDO1_OK */ + #define WM831X_ISINK_MAX_ISEL 56 extern int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL]; -- cgit v1.2.3 From 956f25a6778a2510d52973ab8a3ac2e03e2c3704 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 13 Aug 2009 11:49:23 +0200 Subject: mfd: AB3100 accessor function cleanups This adds the _interruptible suffix to the AB3100 accessor functions on par with mutex_lock_interruptible() that's used for blocking simultaneous calls to the AB3100 acessor functions. Since these accesses are slow on a 100kHz I2C bus and may line up waiting for the mutex, we need to handle interruption by system shutdown or kill signals and may just as well denote that in the function names. Signed-off-by: Linus Walleij Signed-off-by: Samuel Ortiz --- include/linux/mfd/ab3100.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/ab3100.h b/include/linux/mfd/ab3100.h index 7a3f316e3848..56343b8013b5 100644 --- a/include/linux/mfd/ab3100.h +++ b/include/linux/mfd/ab3100.h @@ -86,11 +86,11 @@ struct ab3100 { bool startup_events_read; }; -int ab3100_set_register(struct ab3100 *ab3100, u8 reg, u8 regval); -int ab3100_get_register(struct ab3100 *ab3100, u8 reg, u8 *regval); -int ab3100_get_register_page(struct ab3100 *ab3100, +int ab3100_set_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 regval); +int ab3100_get_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 *regval); +int ab3100_get_register_page_interruptible(struct ab3100 *ab3100, u8 first_reg, u8 *regvals, u8 numregs); -int ab3100_mask_and_set_register(struct ab3100 *ab3100, +int ab3100_mask_and_set_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 andmask, u8 ormask); u8 ab3100_get_chip_type(struct ab3100 *ab3100); int ab3100_event_register(struct ab3100 *ab3100, -- cgit v1.2.3 From 8238addcc52c94c59b10c3c1e9850d3a7921f825 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 19 Aug 2009 01:40:28 +0200 Subject: mfd: Add Freescale MC13783 driver This driver provides the core Freescale MC13783 support. It registers the client platform_devices and provides access to the A/D converter. Signed-off-by: Sascha Hauer Signed-off-by: Samuel Ortiz --- include/linux/mfd/mc13783-private.h | 396 ++++++++++++++++++++++++++++++++++++ include/linux/mfd/mc13783.h | 84 ++++++++ 2 files changed, 480 insertions(+) create mode 100644 include/linux/mfd/mc13783-private.h create mode 100644 include/linux/mfd/mc13783.h (limited to 'include/linux') diff --git a/include/linux/mfd/mc13783-private.h b/include/linux/mfd/mc13783-private.h new file mode 100644 index 000000000000..47e698cb0f16 --- /dev/null +++ b/include/linux/mfd/mc13783-private.h @@ -0,0 +1,396 @@ +/* + * Copyright 2009 Pengutronix, Sascha Hauer + * + * Initial development of this code was funded by + * Phytec Messtechnik GmbH, http://www.phytec.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __LINUX_MFD_MC13783_PRIV_H +#define __LINUX_MFD_MC13783_PRIV_H + +#include +#include +#include +#include + +struct mc13783_irq { + void (*handler)(int, void *); + void *data; +}; + +#define MC13783_NUM_IRQ 2 +#define MC13783_IRQ_TS 0 +#define MC13783_IRQ_REGULATOR 1 + +#define MC13783_ADC_MODE_TS 1 +#define MC13783_ADC_MODE_SINGLE_CHAN 2 +#define MC13783_ADC_MODE_MULT_CHAN 3 + +struct mc13783 { + int revision; + struct device *dev; + struct spi_device *spi_device; + + int (*read_dev)(void *data, char reg, int count, u32 *dst); + int (*write_dev)(void *data, char reg, int count, const u32 *src); + + struct mutex io_lock; + void *io_data; + int irq; + unsigned int flags; + + struct mc13783_irq irq_handler[MC13783_NUM_IRQ]; + struct work_struct work; + struct completion adc_done; + unsigned int ts_active; + struct mutex adc_conv_lock; + + struct mc13783_regulator_init_data *regulators; + int num_regulators; +}; + +int mc13783_reg_read(struct mc13783 *, int reg_num, u32 *); +int mc13783_reg_write(struct mc13783 *, int, u32); +int mc13783_set_bits(struct mc13783 *, int, u32, u32); +int mc13783_free_irq(struct mc13783 *mc13783, int irq); +int mc13783_register_irq(struct mc13783 *mc13783, int irq, + void (*handler) (int, void *), void *data); + +#define MC13783_REG_INTERRUPT_STATUS_0 0 +#define MC13783_REG_INTERRUPT_MASK_0 1 +#define MC13783_REG_INTERRUPT_SENSE_0 2 +#define MC13783_REG_INTERRUPT_STATUS_1 3 +#define MC13783_REG_INTERRUPT_MASK_1 4 +#define MC13783_REG_INTERRUPT_SENSE_1 5 +#define MC13783_REG_POWER_UP_MODE_SENSE 6 +#define MC13783_REG_REVISION 7 +#define MC13783_REG_SEMAPHORE 8 +#define MC13783_REG_ARBITRATION_PERIPHERAL_AUDIO 9 +#define MC13783_REG_ARBITRATION_SWITCHERS 10 +#define MC13783_REG_ARBITRATION_REGULATORS_0 11 +#define MC13783_REG_ARBITRATION_REGULATORS_1 12 +#define MC13783_REG_POWER_CONTROL_0 13 +#define MC13783_REG_POWER_CONTROL_1 14 +#define MC13783_REG_POWER_CONTROL_2 15 +#define MC13783_REG_REGEN_ASSIGNMENT 16 +#define MC13783_REG_CONTROL_SPARE 17 +#define MC13783_REG_MEMORY_A 18 +#define MC13783_REG_MEMORY_B 19 +#define MC13783_REG_RTC_TIME 20 +#define MC13783_REG_RTC_ALARM 21 +#define MC13783_REG_RTC_DAY 22 +#define MC13783_REG_RTC_DAY_ALARM 23 +#define MC13783_REG_SWITCHERS_0 24 +#define MC13783_REG_SWITCHERS_1 25 +#define MC13783_REG_SWITCHERS_2 26 +#define MC13783_REG_SWITCHERS_3 27 +#define MC13783_REG_SWITCHERS_4 28 +#define MC13783_REG_SWITCHERS_5 29 +#define MC13783_REG_REGULATOR_SETTING_0 30 +#define MC13783_REG_REGULATOR_SETTING_1 31 +#define MC13783_REG_REGULATOR_MODE_0 32 +#define MC13783_REG_REGULATOR_MODE_1 33 +#define MC13783_REG_POWER_MISCELLANEOUS 34 +#define MC13783_REG_POWER_SPARE 35 +#define MC13783_REG_AUDIO_RX_0 36 +#define MC13783_REG_AUDIO_RX_1 37 +#define MC13783_REG_AUDIO_TX 38 +#define MC13783_REG_AUDIO_SSI_NETWORK 39 +#define MC13783_REG_AUDIO_CODEC 40 +#define MC13783_REG_AUDIO_STEREO_DAC 41 +#define MC13783_REG_AUDIO_SPARE 42 +#define MC13783_REG_ADC_0 43 +#define MC13783_REG_ADC_1 44 +#define MC13783_REG_ADC_2 45 +#define MC13783_REG_ADC_3 46 +#define MC13783_REG_ADC_4 47 +#define MC13783_REG_CHARGER 48 +#define MC13783_REG_USB 49 +#define MC13783_REG_CHARGE_USB_SPARE 50 +#define MC13783_REG_LED_CONTROL_0 51 +#define MC13783_REG_LED_CONTROL_1 52 +#define MC13783_REG_LED_CONTROL_2 53 +#define MC13783_REG_LED_CONTROL_3 54 +#define MC13783_REG_LED_CONTROL_4 55 +#define MC13783_REG_LED_CONTROL_5 56 +#define MC13783_REG_SPARE 57 +#define MC13783_REG_TRIM_0 58 +#define MC13783_REG_TRIM_1 59 +#define MC13783_REG_TEST_0 60 +#define MC13783_REG_TEST_1 61 +#define MC13783_REG_TEST_2 62 +#define MC13783_REG_TEST_3 63 +#define MC13783_REG_NB 64 + + +/* + * Interrupt Status + */ +#define MC13783_INT_STAT_ADCDONEI (1 << 0) +#define MC13783_INT_STAT_ADCBISDONEI (1 << 1) +#define MC13783_INT_STAT_TSI (1 << 2) +#define MC13783_INT_STAT_WHIGHI (1 << 3) +#define MC13783_INT_STAT_WLOWI (1 << 4) +#define MC13783_INT_STAT_CHGDETI (1 << 6) +#define MC13783_INT_STAT_CHGOVI (1 << 7) +#define MC13783_INT_STAT_CHGREVI (1 << 8) +#define MC13783_INT_STAT_CHGSHORTI (1 << 9) +#define MC13783_INT_STAT_CCCVI (1 << 10) +#define MC13783_INT_STAT_CHGCURRI (1 << 11) +#define MC13783_INT_STAT_BPONI (1 << 12) +#define MC13783_INT_STAT_LOBATLI (1 << 13) +#define MC13783_INT_STAT_LOBATHI (1 << 14) +#define MC13783_INT_STAT_UDPI (1 << 15) +#define MC13783_INT_STAT_USBI (1 << 16) +#define MC13783_INT_STAT_IDI (1 << 19) +#define MC13783_INT_STAT_Unused (1 << 20) +#define MC13783_INT_STAT_SE1I (1 << 21) +#define MC13783_INT_STAT_CKDETI (1 << 22) +#define MC13783_INT_STAT_UDMI (1 << 23) + +/* + * Interrupt Mask + */ +#define MC13783_INT_MASK_ADCDONEM (1 << 0) +#define MC13783_INT_MASK_ADCBISDONEM (1 << 1) +#define MC13783_INT_MASK_TSM (1 << 2) +#define MC13783_INT_MASK_WHIGHM (1 << 3) +#define MC13783_INT_MASK_WLOWM (1 << 4) +#define MC13783_INT_MASK_CHGDETM (1 << 6) +#define MC13783_INT_MASK_CHGOVM (1 << 7) +#define MC13783_INT_MASK_CHGREVM (1 << 8) +#define MC13783_INT_MASK_CHGSHORTM (1 << 9) +#define MC13783_INT_MASK_CCCVM (1 << 10) +#define MC13783_INT_MASK_CHGCURRM (1 << 11) +#define MC13783_INT_MASK_BPONM (1 << 12) +#define MC13783_INT_MASK_LOBATLM (1 << 13) +#define MC13783_INT_MASK_LOBATHM (1 << 14) +#define MC13783_INT_MASK_UDPM (1 << 15) +#define MC13783_INT_MASK_USBM (1 << 16) +#define MC13783_INT_MASK_IDM (1 << 19) +#define MC13783_INT_MASK_SE1M (1 << 21) +#define MC13783_INT_MASK_CKDETM (1 << 22) + +/* + * Reg Regulator Mode 0 + */ +#define MC13783_REGCTRL_VAUDIO_EN (1 << 0) +#define MC13783_REGCTRL_VAUDIO_STBY (1 << 1) +#define MC13783_REGCTRL_VAUDIO_MODE (1 << 2) +#define MC13783_REGCTRL_VIOHI_EN (1 << 3) +#define MC13783_REGCTRL_VIOHI_STBY (1 << 4) +#define MC13783_REGCTRL_VIOHI_MODE (1 << 5) +#define MC13783_REGCTRL_VIOLO_EN (1 << 6) +#define MC13783_REGCTRL_VIOLO_STBY (1 << 7) +#define MC13783_REGCTRL_VIOLO_MODE (1 << 8) +#define MC13783_REGCTRL_VDIG_EN (1 << 9) +#define MC13783_REGCTRL_VDIG_STBY (1 << 10) +#define MC13783_REGCTRL_VDIG_MODE (1 << 11) +#define MC13783_REGCTRL_VGEN_EN (1 << 12) +#define MC13783_REGCTRL_VGEN_STBY (1 << 13) +#define MC13783_REGCTRL_VGEN_MODE (1 << 14) +#define MC13783_REGCTRL_VRFDIG_EN (1 << 15) +#define MC13783_REGCTRL_VRFDIG_STBY (1 << 16) +#define MC13783_REGCTRL_VRFDIG_MODE (1 << 17) +#define MC13783_REGCTRL_VRFREF_EN (1 << 18) +#define MC13783_REGCTRL_VRFREF_STBY (1 << 19) +#define MC13783_REGCTRL_VRFREF_MODE (1 << 20) +#define MC13783_REGCTRL_VRFCP_EN (1 << 21) +#define MC13783_REGCTRL_VRFCP_STBY (1 << 22) +#define MC13783_REGCTRL_VRFCP_MODE (1 << 23) + +/* + * Reg Regulator Mode 1 + */ +#define MC13783_REGCTRL_VSIM_EN (1 << 0) +#define MC13783_REGCTRL_VSIM_STBY (1 << 1) +#define MC13783_REGCTRL_VSIM_MODE (1 << 2) +#define MC13783_REGCTRL_VESIM_EN (1 << 3) +#define MC13783_REGCTRL_VESIM_STBY (1 << 4) +#define MC13783_REGCTRL_VESIM_MODE (1 << 5) +#define MC13783_REGCTRL_VCAM_EN (1 << 6) +#define MC13783_REGCTRL_VCAM_STBY (1 << 7) +#define MC13783_REGCTRL_VCAM_MODE (1 << 8) +#define MC13783_REGCTRL_VRFBG_EN (1 << 9) +#define MC13783_REGCTRL_VRFBG_STBY (1 << 10) +#define MC13783_REGCTRL_VVIB_EN (1 << 11) +#define MC13783_REGCTRL_VRF1_EN (1 << 12) +#define MC13783_REGCTRL_VRF1_STBY (1 << 13) +#define MC13783_REGCTRL_VRF1_MODE (1 << 14) +#define MC13783_REGCTRL_VRF2_EN (1 << 15) +#define MC13783_REGCTRL_VRF2_STBY (1 << 16) +#define MC13783_REGCTRL_VRF2_MODE (1 << 17) +#define MC13783_REGCTRL_VMMC1_EN (1 << 18) +#define MC13783_REGCTRL_VMMC1_STBY (1 << 19) +#define MC13783_REGCTRL_VMMC1_MODE (1 << 20) +#define MC13783_REGCTRL_VMMC2_EN (1 << 21) +#define MC13783_REGCTRL_VMMC2_STBY (1 << 22) +#define MC13783_REGCTRL_VMMC2_MODE (1 << 23) + +/* + * Reg Regulator Misc. + */ +#define MC13783_REGCTRL_GPO1_EN (1 << 6) +#define MC13783_REGCTRL_GPO2_EN (1 << 8) +#define MC13783_REGCTRL_GPO3_EN (1 << 10) +#define MC13783_REGCTRL_GPO4_EN (1 << 12) +#define MC13783_REGCTRL_VIBPINCTRL (1 << 14) + +/* + * Reg Switcher 4 + */ +#define MC13783_SWCTRL_SW1A_MODE (1 << 0) +#define MC13783_SWCTRL_SW1A_STBY_MODE (1 << 2) +#define MC13783_SWCTRL_SW1A_DVS_SPEED (1 << 6) +#define MC13783_SWCTRL_SW1A_PANIC_MODE (1 << 8) +#define MC13783_SWCTRL_SW1A_SOFTSTART (1 << 9) +#define MC13783_SWCTRL_SW1B_MODE (1 << 10) +#define MC13783_SWCTRL_SW1B_STBY_MODE (1 << 12) +#define MC13783_SWCTRL_SW1B_DVS_SPEED (1 << 14) +#define MC13783_SWCTRL_SW1B_PANIC_MODE (1 << 16) +#define MC13783_SWCTRL_SW1B_SOFTSTART (1 << 17) +#define MC13783_SWCTRL_PLL_EN (1 << 18) +#define MC13783_SWCTRL_PLL_FACTOR (1 << 19) + +/* + * Reg Switcher 5 + */ +#define MC13783_SWCTRL_SW2A_MODE (1 << 0) +#define MC13783_SWCTRL_SW2A_STBY_MODE (1 << 2) +#define MC13783_SWCTRL_SW2A_DVS_SPEED (1 << 6) +#define MC13783_SWCTRL_SW2A_PANIC_MODE (1 << 8) +#define MC13783_SWCTRL_SW2A_SOFTSTART (1 << 9) +#define MC13783_SWCTRL_SW2B_MODE (1 << 10) +#define MC13783_SWCTRL_SW2B_STBY_MODE (1 << 12) +#define MC13783_SWCTRL_SW2B_DVS_SPEED (1 << 14) +#define MC13783_SWCTRL_SW2B_PANIC_MODE (1 << 16) +#define MC13783_SWCTRL_SW2B_SOFTSTART (1 << 17) +#define MC13783_SWSET_SW3 (1 << 18) +#define MC13783_SWCTRL_SW3_EN (1 << 20) +#define MC13783_SWCTRL_SW3_STBY (1 << 21) +#define MC13783_SWCTRL_SW3_MODE (1 << 22) + +/* + * ADC/Touch + */ +#define MC13783_ADC0_LICELLCON (1 << 0) +#define MC13783_ADC0_CHRGICON (1 << 1) +#define MC13783_ADC0_BATICON (1 << 2) +#define MC13783_ADC0_RTHEN (1 << 3) +#define MC13783_ADC0_DTHEN (1 << 4) +#define MC13783_ADC0_UIDEN (1 << 5) +#define MC13783_ADC0_ADOUTEN (1 << 6) +#define MC13783_ADC0_ADOUTPER (1 << 7) +#define MC13783_ADC0_ADREFEN (1 << 10) +#define MC13783_ADC0_ADREFMODE (1 << 11) +#define MC13783_ADC0_TSMOD0 (1 << 12) +#define MC13783_ADC0_TSMOD1 (1 << 13) +#define MC13783_ADC0_TSMOD2 (1 << 14) +#define MC13783_ADC0_CHRGRAWDIV (1 << 15) +#define MC13783_ADC0_ADINC1 (1 << 16) +#define MC13783_ADC0_ADINC2 (1 << 17) +#define MC13783_ADC0_WCOMP (1 << 18) +#define MC13783_ADC0_ADCBIS0 (1 << 23) + +#define MC13783_ADC1_ADEN (1 << 0) +#define MC13783_ADC1_RAND (1 << 1) +#define MC13783_ADC1_ADSEL (1 << 3) +#define MC13783_ADC1_TRIGMASK (1 << 4) +#define MC13783_ADC1_ADA10 (1 << 5) +#define MC13783_ADC1_ADA11 (1 << 6) +#define MC13783_ADC1_ADA12 (1 << 7) +#define MC13783_ADC1_ADA20 (1 << 8) +#define MC13783_ADC1_ADA21 (1 << 9) +#define MC13783_ADC1_ADA22 (1 << 10) +#define MC13783_ADC1_ATO0 (1 << 11) +#define MC13783_ADC1_ATO1 (1 << 12) +#define MC13783_ADC1_ATO2 (1 << 13) +#define MC13783_ADC1_ATO3 (1 << 14) +#define MC13783_ADC1_ATO4 (1 << 15) +#define MC13783_ADC1_ATO5 (1 << 16) +#define MC13783_ADC1_ATO6 (1 << 17) +#define MC13783_ADC1_ATO7 (1 << 18) +#define MC13783_ADC1_ATOX (1 << 19) +#define MC13783_ADC1_ASC (1 << 20) +#define MC13783_ADC1_ADTRIGIGN (1 << 21) +#define MC13783_ADC1_ADONESHOT (1 << 22) +#define MC13783_ADC1_ADCBIS1 (1 << 23) + +#define MC13783_ADC1_CHAN0_SHIFT 5 +#define MC13783_ADC1_CHAN1_SHIFT 8 + +#define MC13783_ADC2_ADD10 (1 << 2) +#define MC13783_ADC2_ADD11 (1 << 3) +#define MC13783_ADC2_ADD12 (1 << 4) +#define MC13783_ADC2_ADD13 (1 << 5) +#define MC13783_ADC2_ADD14 (1 << 6) +#define MC13783_ADC2_ADD15 (1 << 7) +#define MC13783_ADC2_ADD16 (1 << 8) +#define MC13783_ADC2_ADD17 (1 << 9) +#define MC13783_ADC2_ADD18 (1 << 10) +#define MC13783_ADC2_ADD19 (1 << 11) +#define MC13783_ADC2_ADD20 (1 << 14) +#define MC13783_ADC2_ADD21 (1 << 15) +#define MC13783_ADC2_ADD22 (1 << 16) +#define MC13783_ADC2_ADD23 (1 << 17) +#define MC13783_ADC2_ADD24 (1 << 18) +#define MC13783_ADC2_ADD25 (1 << 19) +#define MC13783_ADC2_ADD26 (1 << 20) +#define MC13783_ADC2_ADD27 (1 << 21) +#define MC13783_ADC2_ADD28 (1 << 22) +#define MC13783_ADC2_ADD29 (1 << 23) + +#define MC13783_ADC3_WHIGH0 (1 << 0) +#define MC13783_ADC3_WHIGH1 (1 << 1) +#define MC13783_ADC3_WHIGH2 (1 << 2) +#define MC13783_ADC3_WHIGH3 (1 << 3) +#define MC13783_ADC3_WHIGH4 (1 << 4) +#define MC13783_ADC3_WHIGH5 (1 << 5) +#define MC13783_ADC3_ICID0 (1 << 6) +#define MC13783_ADC3_ICID1 (1 << 7) +#define MC13783_ADC3_ICID2 (1 << 8) +#define MC13783_ADC3_WLOW0 (1 << 9) +#define MC13783_ADC3_WLOW1 (1 << 10) +#define MC13783_ADC3_WLOW2 (1 << 11) +#define MC13783_ADC3_WLOW3 (1 << 12) +#define MC13783_ADC3_WLOW4 (1 << 13) +#define MC13783_ADC3_WLOW5 (1 << 14) +#define MC13783_ADC3_ADCBIS2 (1 << 23) + +#define MC13783_ADC4_ADDBIS10 (1 << 2) +#define MC13783_ADC4_ADDBIS11 (1 << 3) +#define MC13783_ADC4_ADDBIS12 (1 << 4) +#define MC13783_ADC4_ADDBIS13 (1 << 5) +#define MC13783_ADC4_ADDBIS14 (1 << 6) +#define MC13783_ADC4_ADDBIS15 (1 << 7) +#define MC13783_ADC4_ADDBIS16 (1 << 8) +#define MC13783_ADC4_ADDBIS17 (1 << 9) +#define MC13783_ADC4_ADDBIS18 (1 << 10) +#define MC13783_ADC4_ADDBIS19 (1 << 11) +#define MC13783_ADC4_ADDBIS20 (1 << 14) +#define MC13783_ADC4_ADDBIS21 (1 << 15) +#define MC13783_ADC4_ADDBIS22 (1 << 16) +#define MC13783_ADC4_ADDBIS23 (1 << 17) +#define MC13783_ADC4_ADDBIS24 (1 << 18) +#define MC13783_ADC4_ADDBIS25 (1 << 19) +#define MC13783_ADC4_ADDBIS26 (1 << 20) +#define MC13783_ADC4_ADDBIS27 (1 << 21) +#define MC13783_ADC4_ADDBIS28 (1 << 22) +#define MC13783_ADC4_ADDBIS29 (1 << 23) + +#endif /* __LINUX_MFD_MC13783_PRIV_H */ + diff --git a/include/linux/mfd/mc13783.h b/include/linux/mfd/mc13783.h new file mode 100644 index 000000000000..b3a2a7243573 --- /dev/null +++ b/include/linux/mfd/mc13783.h @@ -0,0 +1,84 @@ +/* + * Copyright 2009 Pengutronix, Sascha Hauer + * + * Initial development of this code was funded by + * Phytec Messtechnik GmbH, http://www.phytec.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __INCLUDE_LINUX_MFD_MC13783_H +#define __INCLUDE_LINUX_MFD_MC13783_H + +struct mc13783; +struct regulator_init_data; + +struct mc13783_regulator_init_data { + int id; + struct regulator_init_data *init_data; +}; + +struct mc13783_platform_data { + struct mc13783_regulator_init_data *regulators; + int num_regulators; + unsigned int flags; +}; + +/* mc13783_platform_data flags */ +#define MC13783_USE_TOUCHSCREEN (1 << 0) +#define MC13783_USE_CODEC (1 << 1) +#define MC13783_USE_ADC (1 << 2) +#define MC13783_USE_RTC (1 << 3) +#define MC13783_USE_REGULATOR (1 << 4) + +int mc13783_adc_do_conversion(struct mc13783 *mc13783, unsigned int mode, + unsigned int channel, unsigned int *sample); + +void mc13783_adc_set_ts_status(struct mc13783 *mc13783, unsigned int status); + +#define MC13783_SW_SW1A 0 +#define MC13783_SW_SW1B 1 +#define MC13783_SW_SW2A 2 +#define MC13783_SW_SW2B 3 +#define MC13783_SW_SW3 4 +#define MC13783_SW_PLL 5 +#define MC13783_REGU_VAUDIO 6 +#define MC13783_REGU_VIOHI 7 +#define MC13783_REGU_VIOLO 8 +#define MC13783_REGU_VDIG 9 +#define MC13783_REGU_VGEN 10 +#define MC13783_REGU_VRFDIG 11 +#define MC13783_REGU_VRFREF 12 +#define MC13783_REGU_VRFCP 13 +#define MC13783_REGU_VSIM 14 +#define MC13783_REGU_VESIM 15 +#define MC13783_REGU_VCAM 16 +#define MC13783_REGU_VRFBG 17 +#define MC13783_REGU_VVIB 18 +#define MC13783_REGU_VRF1 19 +#define MC13783_REGU_VRF2 20 +#define MC13783_REGU_VMMC1 21 +#define MC13783_REGU_VMMC2 22 +#define MC13783_REGU_GPO1 23 +#define MC13783_REGU_GPO2 24 +#define MC13783_REGU_GPO3 25 +#define MC13783_REGU_GPO4 26 +#define MC13783_REGU_V1 27 +#define MC13783_REGU_V2 28 +#define MC13783_REGU_V3 29 +#define MC13783_REGU_V4 30 + +#endif /* __INCLUDE_LINUX_MFD_MC13783_H */ + -- cgit v1.2.3 From ebf0bd366ed8161e6fbc919705d878ccbfd51624 Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Mon, 31 Aug 2009 18:32:18 +0200 Subject: mfd: Add support for TWL4030/5030 dynamic power switching The TWL4030/5030 family of multifunction devices allows board-specific control of the the various regulators, clock and reset lines through 'scripts' that are loaded into its memory. This allows for Dynamic Power Switching (DPS). Implement board-independent core support for DPS that is then used by board-specific code to load custom DPS scripts. Signed-off-by: Amit Kucheria Signed-off-by: Samuel Ortiz --- include/linux/i2c/twl4030.h | 94 ++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 84 insertions(+), 10 deletions(-) (limited to 'include/linux') diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h index 3fd21d7cb6bf..2d02dfd7076c 100644 --- a/include/linux/i2c/twl4030.h +++ b/include/linux/i2c/twl4030.h @@ -223,19 +223,28 @@ int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); /* Power bus message definitions */ -#define DEV_GRP_NULL 0x0 -#define DEV_GRP_P1 0x1 -#define DEV_GRP_P2 0x2 -#define DEV_GRP_P3 0x4 +/* The TWL4030/5030 splits its power-management resources (the various + * regulators, clock and reset lines) into 3 processor groups - P1, P2 and + * P3. These groups can then be configured to transition between sleep, wait-on + * and active states by sending messages to the power bus. See Section 5.4.2 + * Power Resources of TWL4030 TRM + */ -#define RES_GRP_RES 0x0 -#define RES_GRP_PP 0x1 -#define RES_GRP_RC 0x2 +/* Processor groups */ +#define DEV_GRP_NULL 0x0 +#define DEV_GRP_P1 0x1 /* P1: all OMAP devices */ +#define DEV_GRP_P2 0x2 /* P2: all Modem devices */ +#define DEV_GRP_P3 0x4 /* P3: all peripheral devices */ + +/* Resource groups */ +#define RES_GRP_RES 0x0 /* Reserved */ +#define RES_GRP_PP 0x1 /* Power providers */ +#define RES_GRP_RC 0x2 /* Reset and control */ #define RES_GRP_PP_RC 0x3 -#define RES_GRP_PR 0x4 +#define RES_GRP_PR 0x4 /* Power references */ #define RES_GRP_PP_PR 0x5 #define RES_GRP_RC_PR 0x6 -#define RES_GRP_ALL 0x7 +#define RES_GRP_ALL 0x7 /* All resource groups */ #define RES_TYPE2_R0 0x0 @@ -246,6 +255,41 @@ int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); #define RES_STATE_SLEEP 0x8 #define RES_STATE_OFF 0x0 +/* Power resources */ + +/* Power providers */ +#define RES_VAUX1 1 +#define RES_VAUX2 2 +#define RES_VAUX3 3 +#define RES_VAUX4 4 +#define RES_VMMC1 5 +#define RES_VMMC2 6 +#define RES_VPLL1 7 +#define RES_VPLL2 8 +#define RES_VSIM 9 +#define RES_VDAC 10 +#define RES_VINTANA1 11 +#define RES_VINTANA2 12 +#define RES_VINTDIG 13 +#define RES_VIO 14 +#define RES_VDD1 15 +#define RES_VDD2 16 +#define RES_VUSB_1V5 17 +#define RES_VUSB_1V8 18 +#define RES_VUSB_3V1 19 +#define RES_VUSBCP 20 +#define RES_REGEN 21 +/* Reset and control */ +#define RES_NRES_PWRON 22 +#define RES_CLKEN 23 +#define RES_SYSEN 24 +#define RES_HFCLKOUT 25 +#define RES_32KCLKOUT 26 +#define RES_RESET 27 +/* Power Reference */ +#define RES_Main_Ref 28 + +#define TOTAL_RESOURCES 28 /* * Power Bus Message Format ... these can be sent individually by Linux, * but are usually part of downloaded scripts that are run when various @@ -327,6 +371,36 @@ struct twl4030_usb_data { enum twl4030_usb_mode usb_mode; }; +struct twl4030_ins { + u16 pmb_message; + u8 delay; +}; + +struct twl4030_script { + struct twl4030_ins *script; + unsigned size; + u8 flags; +#define TWL4030_WRST_SCRIPT (1<<0) +#define TWL4030_WAKEUP12_SCRIPT (1<<1) +#define TWL4030_WAKEUP3_SCRIPT (1<<2) +#define TWL4030_SLEEP_SCRIPT (1<<3) +}; + +struct twl4030_resconfig { + u8 resource; + u8 devgroup; /* Processor group that Power resource belongs to */ + u8 type; /* Power resource addressed, 6 / broadcast message */ + u8 type2; /* Power resource addressed, 3 / broadcast message */ +}; + +struct twl4030_power_data { + struct twl4030_script **scripts; + unsigned num; + struct twl4030_resconfig *resource_config; +}; + +extern void twl4030_power_init(struct twl4030_power_data *triton2_scripts); + struct twl4030_platform_data { unsigned irq_base, irq_end; struct twl4030_bci_platform_data *bci; @@ -334,6 +408,7 @@ struct twl4030_platform_data { struct twl4030_madc_platform_data *madc; struct twl4030_keypad_data *keypad; struct twl4030_usb_data *usb; + struct twl4030_power_data *power; /* LDO regulators */ struct regulator_init_data *vdac; @@ -364,7 +439,6 @@ int twl4030_sih_setup(int module); #define TWL4030_VAUX3_DEV_GRP 0x1F #define TWL4030_VAUX3_DEDICATED 0x22 - #if defined(CONFIG_TWL4030_BCI_BATTERY) || \ defined(CONFIG_TWL4030_BCI_BATTERY_MODULE) extern int twl4030charger_usb_en(int enable); -- cgit v1.2.3 From 8aba721b23917bc6d374ad42bf80bde5058710e2 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Thu, 27 Aug 2009 20:49:08 +0200 Subject: mfd: Fix ab3100-otp build failure ab3100.h should include linux/workqueue.h for otp to build properly. Signed-off-by: Samuel Ortiz --- include/linux/mfd/ab3100.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mfd/ab3100.h b/include/linux/mfd/ab3100.h index 56343b8013b5..3ead5cfb638c 100644 --- a/include/linux/mfd/ab3100.h +++ b/include/linux/mfd/ab3100.h @@ -6,6 +6,7 @@ */ #include +#include #ifndef MFD_AB3100_H #define MFD_AB3100_H -- cgit v1.2.3 From d619bc143e311a738113dbbe7792bd032403939f Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 9 Sep 2009 11:31:00 +0200 Subject: regulator: AB3100 support This adds support for the regulators found in the AB3100 Mixed-Signal IC. It further also defines platform data for the ST-Ericsson U300 platform and extends the AB3100 MFD driver so that platform/board data with regulation constraints and an init function can be passed down all the way from the board to the regulators. Signed-off-by: Linus Walleij Acked-by: Mark Brown Signed-off-by: Liam Girdwood Signed-off-by: Samuel Ortiz --- include/linux/mfd/ab3100.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/ab3100.h b/include/linux/mfd/ab3100.h index 3ead5cfb638c..e9aa4c9d749d 100644 --- a/include/linux/mfd/ab3100.h +++ b/include/linux/mfd/ab3100.h @@ -7,6 +7,7 @@ #include #include +#include #ifndef MFD_AB3100_H #define MFD_AB3100_H @@ -57,6 +58,14 @@ #define AB3100_STR_BATT_REMOVAL (0x40) #define AB3100_STR_VBUS (0x80) +/* + * AB3100 contains 8 regulators, one external regulator controller + * and a buck converter, further the LDO E and buck converter can + * have separate settings if they are in sleep mode, this is + * modeled as a separate regulator. + */ +#define AB3100_NUM_REGULATORS 10 + /** * struct ab3100 * @access_mutex: lock out concurrent accesses to the AB3100 registers @@ -87,6 +96,25 @@ struct ab3100 { bool startup_events_read; }; +/** + * struct ab3100_platform_data + * Data supplied to initialize board connections to the AB3100 + * @reg_constraints: regulator constraints for target board + * the order of these constraints are: LDO A, C, D, E, + * F, G, H, K, EXT and BUCK. + * @reg_initvals: initial values for the regulator registers + * plus two sleep settings for LDO E and the BUCK converter. + * exactly AB3100_NUM_REGULATORS+2 values must be sent in. + * Order: LDO A, C, E, E sleep, F, G, H, K, EXT, BUCK, + * BUCK sleep, LDO D. (LDO D need to be initialized last.) + * @external_voltage: voltage level of the external regulator. + */ +struct ab3100_platform_data { + struct regulator_init_data reg_constraints[AB3100_NUM_REGULATORS]; + u8 reg_initvals[AB3100_NUM_REGULATORS+2]; + int external_voltage; +}; + int ab3100_set_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 regval); int ab3100_get_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 *regval); int ab3100_get_register_page_interruptible(struct ab3100 *ab3100, -- cgit v1.2.3 From ad4b78bbcbab66998b05d422ac6106b645796e54 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 16 Sep 2009 12:31:31 +0200 Subject: sched: Add new wakeup preemption mode: WAKEUP_RUNNING Create a new wakeup preemption mode, preempt towards tasks that run shorter on avg. It sets next buddy to be sure we actually run the task we preempted for. Test results: root@twins:~# while :; do :; done & [1] 6537 root@twins:~# while :; do :; done & [2] 6538 root@twins:~# while :; do :; done & [3] 6539 root@twins:~# while :; do :; done & [4] 6540 root@twins:/home/peter# ./latt -c4 sleep 4 Entries: 48 (clients=4) Averages: ------------------------------ Max 4750 usec Avg 497 usec Stdev 737 usec root@twins:/home/peter# echo WAKEUP_RUNNING > /debug/sched_features root@twins:/home/peter# ./latt -c4 sleep 4 Entries: 48 (clients=4) Averages: ------------------------------ Max 14 usec Avg 5 usec Stdev 3 usec Disabled by default - needs more testing. Signed-off-by: Peter Zijlstra Acked-by: Mike Galbraith Signed-off-by: Ingo Molnar LKML-Reference: --- include/linux/sched.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index b4a39bb2b4a4..8af3d249170e 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1113,6 +1113,8 @@ struct sched_entity { u64 start_runtime; u64 avg_wakeup; + u64 avg_running; + #ifdef CONFIG_SCHEDSTATS u64 wait_start; u64 wait_max; -- cgit v1.2.3 From c4c259bcc27c4242b012106afdba183622b1735f Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Tue, 15 Sep 2009 16:27:45 +0200 Subject: HID: consolidate connect and disconnect into core code HID core registers input, hidraw and hiddev devices, but leaves unregistering it up to the individual driver, which is not really nice. Let's move all the logic to the core. Reported-by: Marcel Holtmann Reported-by: Brian Rogers Acked-by: Marcel Holtmann Signed-off-by: Jiri Kosina --- include/linux/hid.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/hid.h b/include/linux/hid.h index a0ebdace7baa..10f628416740 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -494,6 +494,7 @@ struct hid_device { /* device report descriptor */ /* hiddev event handler */ int (*hiddev_connect)(struct hid_device *, unsigned int); + void (*hiddev_disconnect)(struct hid_device *); void (*hiddev_hid_event) (struct hid_device *, struct hid_field *field, struct hid_usage *, __s32); void (*hiddev_report_event) (struct hid_device *, struct hid_report *); @@ -691,6 +692,7 @@ struct hid_device *hid_allocate_device(void); int hid_parse_report(struct hid_device *hid, __u8 *start, unsigned size); int hid_check_keys_pressed(struct hid_device *hid); int hid_connect(struct hid_device *hid, unsigned int connect_mask); +void hid_disconnect(struct hid_device *hid); /** * hid_map_usage - map usage input bits @@ -800,6 +802,7 @@ static inline int __must_check hid_hw_start(struct hid_device *hdev, */ static inline void hid_hw_stop(struct hid_device *hdev) { + hid_disconnect(hdev); hdev->ll_driver->stop(hdev); } -- cgit v1.2.3 From 37bce07077b0c335d8747f1ddb27ad585434a47e Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 16 Sep 2009 19:07:32 +0100 Subject: mfd: Convert WM8350 to use request_threaded_irq() Instead of hand rolling our own variant. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/wm8350/core.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mfd/wm8350/core.h b/include/linux/mfd/wm8350/core.h index 969b0b55615c..1d595de6a055 100644 --- a/include/linux/mfd/wm8350/core.h +++ b/include/linux/mfd/wm8350/core.h @@ -626,7 +626,6 @@ struct wm8350 { struct mutex auxadc_mutex; /* Interrupt handling */ - struct work_struct irq_work; struct mutex irq_mutex; /* IRQ table mutex */ struct wm8350_irq irq[WM8350_NUM_IRQ]; int chip_irq; -- cgit v1.2.3 From c0826574ddc0df486ecfc2d655e08904c6513209 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Thu, 17 Sep 2009 17:03:06 +1000 Subject: nfsd: return success for non-NFS4 nfs4_state_start Today's linux-next build (sparc64_defconfig) failed like this: In file included from arch/sparc/kernel/sys_sparc32.c:32: include/linux/nfsd/nfsd.h: In function 'nfs4_state_start': include/linux/nfsd/nfsd.h:177: error: no return statement in function returning non-void Caused by commit 29ab23cc5d351658d01a4327d55e9106a73fd04f ("nfsd4: allow nfs4 state startup to fail"). Please, if you add code that depends on a CONFIG option, build with that option enabled and disabled. Signed-off-by: Stephen Rothwell Signed-off-by: J. Bruce Fields --- include/linux/nfsd/nfsd.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/nfsd/nfsd.h b/include/linux/nfsd/nfsd.h index 24fdf89cea83..03bbe9039104 100644 --- a/include/linux/nfsd/nfsd.h +++ b/include/linux/nfsd/nfsd.h @@ -174,7 +174,7 @@ int nfs4_reset_recoverydir(char *recdir); #else static inline int nfs4_state_init(void) { return 0; } static inline void nfsd4_free_slabs(void) { } -static inline int nfs4_state_start(void) { } +static inline int nfs4_state_start(void) { return 0; } static inline void nfs4_state_shutdown(void) { } static inline time_t nfs4_lease_time(void) { return 0; } static inline void nfs4_reset_lease(time_t leasetime) { } -- cgit v1.2.3 From e2d4304b7d2b85c45de89ec420037d6b9261a12d Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 17 Sep 2009 09:40:31 -0700 Subject: PCI: fix VGA arbiter header file Remove reference to vgaarb.c and replace it with a comment about the arbiter itself. Reported-by: Tiago Vignatti Signed-off-by: Jesse Barnes --- include/linux/vgaarb.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/vgaarb.h b/include/linux/vgaarb.h index e81c64af80c1..a1fa1da8dc1a 100644 --- a/include/linux/vgaarb.h +++ b/include/linux/vgaarb.h @@ -1,5 +1,6 @@ /* - * vgaarb.c + * The VGA aribiter manages VGA space routing and VGA resource decode to + * allow multiple VGA devices to be used in a system in a safe way. * * (C) Copyright 2005 Benjamin Herrenschmidt * (C) Copyright 2007 Paulo R. Zanoni -- cgit v1.2.3 From 2667de81f3256c944b06abdf2c56c2f192fcb724 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 17 Sep 2009 19:01:10 +0200 Subject: perf_counter: Allow for a wakeup watermark Currently we wake the mmap() consumer once every PAGE_SIZE of data and/or once event wakeup_events when specified. For high speed sampling this results in too many wakeups wrt. the buffer size, hence change this. We move the default wakeup limit to 1/4-th the buffer size, and provide for means to manually specify this limit. Signed-off-by: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- include/linux/perf_counter.h | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h index 972f90d7a32f..6c1ef72ea501 100644 --- a/include/linux/perf_counter.h +++ b/include/linux/perf_counter.h @@ -199,10 +199,14 @@ struct perf_counter_attr { inherit_stat : 1, /* per task counts */ enable_on_exec : 1, /* next exec enables */ task : 1, /* trace fork/exit */ + watermark : 1, /* wakeup_watermark */ - __reserved_1 : 50; + __reserved_1 : 49; - __u32 wakeup_events; /* wakeup every n events */ + union { + __u32 wakeup_events; /* wakeup every n events */ + __u32 wakeup_watermark; /* bytes before wakeup */ + }; __u32 __reserved_2; __u64 __reserved_3; @@ -521,6 +525,8 @@ struct perf_mmap_data { atomic_t wakeup; /* needs a wakeup */ atomic_t lost; /* nr records lost */ + long watermark; /* wakeup watermark */ + struct perf_counter_mmap_page *user_page; void *data_pages[0]; }; -- cgit v1.2.3 From d15d6e6cc340566d53d953ffdec2c9e96816fa52 Mon Sep 17 00:00:00 2001 From: "John(Jung-Ik) Lee" Date: Mon, 14 Sep 2009 21:32:33 -0700 Subject: libata: Add pata_atp867x driver for Artop/Acard ATP867X controllers This is a new pata driver for ARTOP 867X 64bit 4-channel UDMA133 ATA ctrls. Based on the Atp867 data sheet rev 1.2, Acard, and in part on early ide codes from Eric Uhrhane . Signed-off-by: John(Jung-Ik) Lee Reviewed-by: Grant Grundler Reviewed-by: Gwendal Gringo Signed-off-by: Jeff Garzik --- include/linux/pci_ids.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 8975add8668f..3b6b788fe2b5 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1529,6 +1529,8 @@ #define PCI_DEVICE_ID_ARTOP_ATP860R 0x0007 #define PCI_DEVICE_ID_ARTOP_ATP865 0x0008 #define PCI_DEVICE_ID_ARTOP_ATP865R 0x0009 +#define PCI_DEVICE_ID_ARTOP_ATP867A 0x000A +#define PCI_DEVICE_ID_ARTOP_ATP867B 0x000B #define PCI_DEVICE_ID_ARTOP_AEC7610 0x8002 #define PCI_DEVICE_ID_ARTOP_AEC7612UW 0x8010 #define PCI_DEVICE_ID_ARTOP_AEC7612U 0x8020 -- cgit v1.2.3 From c3422bea5f09b0e85704f51f2b01271630b8940b Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Sun, 13 Sep 2009 09:15:10 -0700 Subject: rcu: Simplify rcu_read_unlock_special() quiescent-state accounting The earlier approach required two scheduling-clock ticks to note an preemptable-RCU quiescent state in the situation in which the scheduling-clock interrupt is unlucky enough to always interrupt an RCU read-side critical section. With this change, the quiescent state is instead noted by the outermost rcu_read_unlock() immediately following the first scheduling-clock tick, or, alternatively, by the first subsequent context switch. Therefore, this change also speeds up grace periods. Suggested-by: Josh Triplett Signed-off-by: Paul E. McKenney Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu LKML-Reference: <12528585111945-git-send-email-> Signed-off-by: Ingo Molnar --- include/linux/sched.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index f3d74bd04d18..c62a9f84d614 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1740,7 +1740,6 @@ extern cputime_t task_gtime(struct task_struct *p); #define RCU_READ_UNLOCK_BLOCKED (1 << 0) /* blocked while in RCU read-side. */ #define RCU_READ_UNLOCK_NEED_QS (1 << 1) /* RCU core needs CPU response. */ -#define RCU_READ_UNLOCK_GOT_QS (1 << 2) /* CPU has responded to RCU core. */ static inline void rcu_copy_process(struct task_struct *p) { -- cgit v1.2.3 From 16e3081191837a6a04733de5cd5d1d1b303140d4 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Sun, 13 Sep 2009 09:15:11 -0700 Subject: rcu: Fix synchronize_rcu() for TREE_PREEMPT_RCU The redirection of synchronize_sched() to synchronize_rcu() was appropriate for TREE_RCU, but not for TREE_PREEMPT_RCU. Fix this by creating an underlying synchronize_sched(). TREE_RCU then redirects synchronize_rcu() to synchronize_sched(), while TREE_PREEMPT_RCU has its own version of synchronize_rcu(). Signed-off-by: Paul E. McKenney Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu LKML-Reference: <12528585111916-git-send-email-> Signed-off-by: Ingo Molnar --- include/linux/rcupdate.h | 23 +++++------------------ include/linux/rcutree.h | 4 ++-- 2 files changed, 7 insertions(+), 20 deletions(-) (limited to 'include/linux') diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 95e0615f4d75..39dce83c4865 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -52,8 +52,13 @@ struct rcu_head { }; /* Exported common interfaces */ +#ifdef CONFIG_TREE_PREEMPT_RCU extern void synchronize_rcu(void); +#else /* #ifdef CONFIG_TREE_PREEMPT_RCU */ +#define synchronize_rcu synchronize_sched +#endif /* #else #ifdef CONFIG_TREE_PREEMPT_RCU */ extern void synchronize_rcu_bh(void); +extern void synchronize_sched(void); extern void rcu_barrier(void); extern void rcu_barrier_bh(void); extern void rcu_barrier_sched(void); @@ -261,24 +266,6 @@ struct rcu_synchronize { extern void wakeme_after_rcu(struct rcu_head *head); -/** - * synchronize_sched - block until all CPUs have exited any non-preemptive - * kernel code sequences. - * - * This means that all preempt_disable code sequences, including NMI and - * hardware-interrupt handlers, in progress on entry will have completed - * before this primitive returns. However, this does not guarantee that - * softirq handlers will have completed, since in some kernels, these - * handlers can run in process context, and can block. - * - * This primitive provides the guarantees made by the (now removed) - * synchronize_kernel() API. In contrast, synchronize_rcu() only - * guarantees that rcu_read_lock() sections will have completed. - * In "classic RCU", these two guarantees happen to be one and - * the same, but can differ in realtime RCU implementations. - */ -#define synchronize_sched() __synchronize_sched() - /** * call_rcu - Queue an RCU callback for invocation after a grace period. * @head: structure to be used for queueing the RCU updates. diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h index a89307717825..00d08c0cbcc1 100644 --- a/include/linux/rcutree.h +++ b/include/linux/rcutree.h @@ -53,6 +53,8 @@ static inline void __rcu_read_unlock(void) preempt_enable(); } +#define __synchronize_sched() synchronize_rcu() + static inline void exit_rcu(void) { } @@ -68,8 +70,6 @@ static inline void __rcu_read_unlock_bh(void) local_bh_enable(); } -#define __synchronize_sched() synchronize_rcu() - extern void call_rcu_sched(struct rcu_head *head, void (*func)(struct rcu_head *rcu)); -- cgit v1.2.3 From e5e25cf47b0bdd1f7e9b8bb6368ee48e16de0c87 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Fri, 18 Sep 2009 00:54:43 +0200 Subject: tracing: Factorize the events profile accounting Factorize the events enabling accounting in a common tracing core helper. This reduces the size of the profile_enable() and profile_disable() callbacks for each trace events. Signed-off-by: Frederic Weisbecker Acked-by: Steven Rostedt Acked-by: Li Zefan Cc: Peter Zijlstra Cc: Jason Baron Cc: Masami Hiramatsu Cc: Ingo Molnar --- include/linux/ftrace_event.h | 4 ++-- include/linux/syscalls.h | 24 ++++++++---------------- 2 files changed, 10 insertions(+), 18 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h index bd099ba82ccc..bc103d7b1ca8 100644 --- a/include/linux/ftrace_event.h +++ b/include/linux/ftrace_event.h @@ -130,8 +130,8 @@ struct ftrace_event_call { void *data; atomic_t profile_count; - int (*profile_enable)(struct ftrace_event_call *); - void (*profile_disable)(struct ftrace_event_call *); + int (*profile_enable)(void); + void (*profile_disable)(void); }; #define MAX_FILTER_PRED 32 diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index a8e37821cc60..7d9803cbb20f 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -100,33 +100,25 @@ struct perf_counter_attr; #ifdef CONFIG_EVENT_PROFILE #define TRACE_SYS_ENTER_PROFILE(sname) \ -static int prof_sysenter_enable_##sname(struct ftrace_event_call *event_call) \ +static int prof_sysenter_enable_##sname(void) \ { \ - int ret = 0; \ - if (!atomic_inc_return(&event_enter_##sname.profile_count)) \ - ret = reg_prof_syscall_enter("sys"#sname); \ - return ret; \ + return reg_prof_syscall_enter("sys"#sname); \ } \ \ -static void prof_sysenter_disable_##sname(struct ftrace_event_call *event_call)\ +static void prof_sysenter_disable_##sname(void) \ { \ - if (atomic_add_negative(-1, &event_enter_##sname.profile_count)) \ - unreg_prof_syscall_enter("sys"#sname); \ + unreg_prof_syscall_enter("sys"#sname); \ } #define TRACE_SYS_EXIT_PROFILE(sname) \ -static int prof_sysexit_enable_##sname(struct ftrace_event_call *event_call) \ +static int prof_sysexit_enable_##sname(void) \ { \ - int ret = 0; \ - if (!atomic_inc_return(&event_exit_##sname.profile_count)) \ - ret = reg_prof_syscall_exit("sys"#sname); \ - return ret; \ + return reg_prof_syscall_exit("sys"#sname); \ } \ \ -static void prof_sysexit_disable_##sname(struct ftrace_event_call *event_call) \ +static void prof_sysexit_disable_##sname(void) \ { \ - if (atomic_add_negative(-1, &event_exit_##sname.profile_count)) \ - unreg_prof_syscall_exit("sys"#sname); \ + unreg_prof_syscall_exit("sys"#sname); \ } #define TRACE_SYS_ENTER_PROFILE_INIT(sname) \ -- cgit v1.2.3 From 20ab4425a77a1f34028cc6ce57053c22c184ba5f Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Fri, 18 Sep 2009 06:10:28 +0200 Subject: tracing: Allocate the ftrace event profile buffer dynamically Currently the trace event profile buffer is allocated in the stack. But this may be too much for the stack, as the events can have large statically defined field size and can also grow with dynamic arrays. Allocate two per cpu buffer for all profiled events. The first cpu buffer is used to host every non-nmi context traces. It is protected by disabling the interrupts while writing and committing the trace. The second buffer is reserved for nmi. So that there is no race between them and the first buffer. The whole write/commit section is rcu protected because we release these buffers while deactivating the last profiling trace event. v2: Move the buffers from trace_event to be global, as pointed by Steven Rostedt. v3: Fix the syscall events to handle the profiling buffer races by disabling interrupts, now that the buffers are globals. Suggested-by: Steven Rostedt Signed-off-by: Frederic Weisbecker Cc: Steven Rostedt Cc: Peter Zijlstra Cc: Li Zefan Cc: Jason Baron Cc: Masami Hiramatsu Cc: Ingo Molnar --- include/linux/ftrace_event.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h index bc103d7b1ca8..4ec5e67e18cf 100644 --- a/include/linux/ftrace_event.h +++ b/include/linux/ftrace_event.h @@ -4,6 +4,7 @@ #include #include #include +#include struct trace_array; struct tracer; @@ -134,6 +135,11 @@ struct ftrace_event_call { void (*profile_disable)(void); }; +#define FTRACE_MAX_PROFILE_SIZE 2048 + +extern char *trace_profile_buf; +extern char *trace_profile_buf_nmi; + #define MAX_FILTER_PRED 32 #define MAX_FILTER_STR_VAL 256 /* Should handle KSYM_SYMBOL_LEN */ -- cgit v1.2.3 From 181d683d752c432635eda0f182ee71548c1f1820 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 16 Sep 2009 01:06:43 -0700 Subject: Input: libps2 - additional locking for i8042 ports The serio ports on i8042 are not completely isolated; while we provide enough locking to ensure proper serialization when accessing control and data registers AUX and KBD ports can still have an effect on each other on PS/2 protocol level. The most prominent effect is that issuing a command for the device connected to one port may cause abort of the command currently executing by the device connected to another port. Since i8042 nor serio subsystem are not aware of the details of the PS/2 protocol (length of the commands and their replies and so on) the locking should be done on libps2 level by adding special handling when we see that we are dealing with serio port on i8042. Signed-off-by: Dmitry Torokhov --- include/linux/i8042.h | 30 ++++++++++++++++++++++++++++++ include/linux/libps2.h | 2 ++ 2 files changed, 32 insertions(+) (limited to 'include/linux') diff --git a/include/linux/i8042.h b/include/linux/i8042.h index 7907a72403ee..60c3360ef6ad 100644 --- a/include/linux/i8042.h +++ b/include/linux/i8042.h @@ -7,6 +7,7 @@ * the Free Software Foundation. */ +#include /* * Standard commands. @@ -30,6 +31,35 @@ #define I8042_CMD_MUX_PFX 0x0090 #define I8042_CMD_MUX_SEND 0x1090 +struct serio; + +#if defined(CONFIG_SERIO_I8042) || defined(CONFIG_SERIO_I8042_MODULE) + +void i8042_lock_chip(void); +void i8042_unlock_chip(void); int i8042_command(unsigned char *param, int command); +bool i8042_check_port_owner(const struct serio *); + +#else + +void i8042_lock_chip(void) +{ +} + +void i8042_unlock_chip(void) +{ +} + +int i8042_command(unsigned char *param, int command) +{ + return -ENOSYS; +} + +bool i8042_check_port_owner(const struct serio *serio) +{ + return false; +} + +#endif #endif diff --git a/include/linux/libps2.h b/include/linux/libps2.h index fcf5fbe6a50c..79603a6c356f 100644 --- a/include/linux/libps2.h +++ b/include/linux/libps2.h @@ -44,6 +44,8 @@ struct ps2dev { void ps2_init(struct ps2dev *ps2dev, struct serio *serio); int ps2_sendbyte(struct ps2dev *ps2dev, unsigned char byte, int timeout); void ps2_drain(struct ps2dev *ps2dev, int maxbytes, int timeout); +void ps2_begin_command(struct ps2dev *ps2dev); +void ps2_end_command(struct ps2dev *ps2dev); int __ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command); int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command); int ps2_handle_ack(struct ps2dev *ps2dev, unsigned char data); -- cgit v1.2.3 From ffd0db97196c1057f09c2ab42dd5b30e94e511d9 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 16 Sep 2009 01:06:43 -0700 Subject: Input: add generic suspend and resume for input devices Automatically turn off leds and sound effects as part of suspend process and restore led state, sounds and repeat rate at resume. Signed-off-by: Dmitry Torokhov --- include/linux/input.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/input.h b/include/linux/input.h index 8b3bc3e0d146..0ccfc30cd40f 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -1123,7 +1123,7 @@ struct input_dev { struct mutex mutex; unsigned int users; - int going_away; + bool going_away; struct device dev; -- cgit v1.2.3 From 38e783b38148531c0840ac130b97eb8158f84b48 Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Thu, 17 Sep 2009 22:35:45 -0700 Subject: Input: add touchscreen driver for MELFAS MCS-5000 controller The MELPAS MCS-5000 is the touchscreen controller. The overview of this controller can see at the following website: http://www.melfas.com/product/product01.asp?k_r=eng_ This driver is tested on s3c6410 NCP board and supports only the i2c interface. Signed-off-by: Joonyoung Shim Signed-off-by: Dmitry Torokhov --- include/linux/i2c/mcs5000_ts.h | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 include/linux/i2c/mcs5000_ts.h (limited to 'include/linux') diff --git a/include/linux/i2c/mcs5000_ts.h b/include/linux/i2c/mcs5000_ts.h new file mode 100644 index 000000000000..5a117b5ca15e --- /dev/null +++ b/include/linux/i2c/mcs5000_ts.h @@ -0,0 +1,24 @@ +/* + * mcs5000_ts.h + * + * Copyright (C) 2009 Samsung Electronics Co.Ltd + * Author: Joonyoung Shim + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __LINUX_MCS5000_TS_H +#define __LINUX_MCS5000_TS_H + +/* platform data for the MELFAS MCS-5000 touchscreen driver */ +struct mcs5000_ts_platform_data { + void (*cfg_pin)(void); + int x_size; + int y_size; +}; + +#endif /* __LINUX_MCS5000_TS_H */ -- cgit v1.2.3 From 88751dd6ce1fb0627c36c4ab08a40730e5a50d3e Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Thu, 17 Sep 2009 22:39:38 -0700 Subject: Input: add driver for ADP5588 QWERTY I2C Keypad Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu Signed-off-by: Mike Frysinger Signed-off-by: Dmitry Torokhov --- include/linux/i2c/adp5588.h | 92 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 92 insertions(+) create mode 100644 include/linux/i2c/adp5588.h (limited to 'include/linux') diff --git a/include/linux/i2c/adp5588.h b/include/linux/i2c/adp5588.h new file mode 100644 index 000000000000..fc5db826b48e --- /dev/null +++ b/include/linux/i2c/adp5588.h @@ -0,0 +1,92 @@ +/* + * Analog Devices ADP5588 I/O Expander and QWERTY Keypad Controller + * + * Copyright 2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _ADP5588_H +#define _ADP5588_H + +#define DEV_ID 0x00 /* Device ID */ +#define CFG 0x01 /* Configuration Register1 */ +#define INT_STAT 0x02 /* Interrupt Status Register */ +#define KEY_LCK_EC_STAT 0x03 /* Key Lock and Event Counter Register */ +#define Key_EVENTA 0x04 /* Key Event Register A */ +#define Key_EVENTB 0x05 /* Key Event Register B */ +#define Key_EVENTC 0x06 /* Key Event Register C */ +#define Key_EVENTD 0x07 /* Key Event Register D */ +#define Key_EVENTE 0x08 /* Key Event Register E */ +#define Key_EVENTF 0x09 /* Key Event Register F */ +#define Key_EVENTG 0x0A /* Key Event Register G */ +#define Key_EVENTH 0x0B /* Key Event Register H */ +#define Key_EVENTI 0x0C /* Key Event Register I */ +#define Key_EVENTJ 0x0D /* Key Event Register J */ +#define KP_LCK_TMR 0x0E /* Keypad Lock1 to Lock2 Timer */ +#define UNLOCK1 0x0F /* Unlock Key1 */ +#define UNLOCK2 0x10 /* Unlock Key2 */ +#define GPIO_INT_STAT1 0x11 /* GPIO Interrupt Status */ +#define GPIO_INT_STAT2 0x12 /* GPIO Interrupt Status */ +#define GPIO_INT_STAT3 0x13 /* GPIO Interrupt Status */ +#define GPIO_DAT_STAT1 0x14 /* GPIO Data Status, Read twice to clear */ +#define GPIO_DAT_STAT2 0x15 /* GPIO Data Status, Read twice to clear */ +#define GPIO_DAT_STAT3 0x16 /* GPIO Data Status, Read twice to clear */ +#define GPIO_DAT_OUT1 0x17 /* GPIO DATA OUT */ +#define GPIO_DAT_OUT2 0x18 /* GPIO DATA OUT */ +#define GPIO_DAT_OUT3 0x19 /* GPIO DATA OUT */ +#define GPIO_INT_EN1 0x1A /* GPIO Interrupt Enable */ +#define GPIO_INT_EN2 0x1B /* GPIO Interrupt Enable */ +#define GPIO_INT_EN3 0x1C /* GPIO Interrupt Enable */ +#define KP_GPIO1 0x1D /* Keypad or GPIO Selection */ +#define KP_GPIO2 0x1E /* Keypad or GPIO Selection */ +#define KP_GPIO3 0x1F /* Keypad or GPIO Selection */ +#define GPI_EM1 0x20 /* GPI Event Mode 1 */ +#define GPI_EM2 0x21 /* GPI Event Mode 2 */ +#define GPI_EM3 0x22 /* GPI Event Mode 3 */ +#define GPIO_DIR1 0x23 /* GPIO Data Direction */ +#define GPIO_DIR2 0x24 /* GPIO Data Direction */ +#define GPIO_DIR3 0x25 /* GPIO Data Direction */ +#define GPIO_INT_LVL1 0x26 /* GPIO Edge/Level Detect */ +#define GPIO_INT_LVL2 0x27 /* GPIO Edge/Level Detect */ +#define GPIO_INT_LVL3 0x28 /* GPIO Edge/Level Detect */ +#define Debounce_DIS1 0x29 /* Debounce Disable */ +#define Debounce_DIS2 0x2A /* Debounce Disable */ +#define Debounce_DIS3 0x2B /* Debounce Disable */ +#define GPIO_PULL1 0x2C /* GPIO Pull Disable */ +#define GPIO_PULL2 0x2D /* GPIO Pull Disable */ +#define GPIO_PULL3 0x2E /* GPIO Pull Disable */ +#define CMP_CFG_STAT 0x30 /* Comparator Configuration and Status Register */ +#define CMP_CONFG_SENS1 0x31 /* Sensor1 Comparator Configuration Register */ +#define CMP_CONFG_SENS2 0x32 /* L2 Light Sensor Reference Level, Output Falling for Sensor 1 */ +#define CMP1_LVL2_TRIP 0x33 /* L2 Light Sensor Hysteresis (Active when Output Rising) for Sensor 1 */ +#define CMP1_LVL2_HYS 0x34 /* L3 Light Sensor Reference Level, Output Falling For Sensor 1 */ +#define CMP1_LVL3_TRIP 0x35 /* L3 Light Sensor Hysteresis (Active when Output Rising) For Sensor 1 */ +#define CMP1_LVL3_HYS 0x36 /* Sensor 2 Comparator Configuration Register */ +#define CMP2_LVL2_TRIP 0x37 /* L2 Light Sensor Reference Level, Output Falling for Sensor 2 */ +#define CMP2_LVL2_HYS 0x38 /* L2 Light Sensor Hysteresis (Active when Output Rising) for Sensor 2 */ +#define CMP2_LVL3_TRIP 0x39 /* L3 Light Sensor Reference Level, Output Falling For Sensor 2 */ +#define CMP2_LVL3_HYS 0x3A /* L3 Light Sensor Hysteresis (Active when Output Rising) For Sensor 2 */ +#define CMP1_ADC_DAT_R1 0x3B /* Comparator 1 ADC data Register1 */ +#define CMP1_ADC_DAT_R2 0x3C /* Comparator 1 ADC data Register2 */ +#define CMP2_ADC_DAT_R1 0x3D /* Comparator 2 ADC data Register1 */ +#define CMP2_ADC_DAT_R2 0x3E /* Comparator 2 ADC data Register2 */ + +#define ADP5588_DEVICE_ID_MASK 0xF + +/* Put one of these structures in i2c_board_info platform_data */ + +#define ADP5588_KEYMAPSIZE 80 + +struct adp5588_kpad_platform_data { + int rows; /* Number of rows */ + int cols; /* Number of columns */ + const unsigned short *keymap; /* Pointer to keymap */ + unsigned short keymapsize; /* Keymap size */ + unsigned repeat:1; /* Enable key repeat */ + unsigned en_keylock:1; /* Enable Key Lock feature */ + unsigned short unlock_key1; /* Unlock Key 1 */ + unsigned short unlock_key2; /* Unlock Key 2 */ +}; + +#endif -- cgit v1.2.3 From 502a0106b2cc31940f690dc6693fddfd3b97cab5 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 27 Jul 2009 14:46:12 +0100 Subject: [WATCHDOG] Add support for WM831x watchdog The WM831x series of devices provide a watchdog with configurable behaviour on timer expiry. Currently this driver support refreshes via a register or GPIO line and autonomous refreshes from a hardware source (eg, a clock). Signed-off-by: Mark Brown Signed-off-by: Wim Van Sebroeck --- include/linux/mfd/wm831x/watchdog.h | 52 +++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 include/linux/mfd/wm831x/watchdog.h (limited to 'include/linux') diff --git a/include/linux/mfd/wm831x/watchdog.h b/include/linux/mfd/wm831x/watchdog.h new file mode 100644 index 000000000000..97a99b52956f --- /dev/null +++ b/include/linux/mfd/wm831x/watchdog.h @@ -0,0 +1,52 @@ +/* + * include/linux/mfd/wm831x/watchdog.h -- Watchdog for WM831x + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MFD_WM831X_WATCHDOG_H__ +#define __MFD_WM831X_WATCHDOG_H__ + + +/* + * R16388 (0x4004) - Watchdog + */ +#define WM831X_WDOG_ENA 0x8000 /* WDOG_ENA */ +#define WM831X_WDOG_ENA_MASK 0x8000 /* WDOG_ENA */ +#define WM831X_WDOG_ENA_SHIFT 15 /* WDOG_ENA */ +#define WM831X_WDOG_ENA_WIDTH 1 /* WDOG_ENA */ +#define WM831X_WDOG_DEBUG 0x4000 /* WDOG_DEBUG */ +#define WM831X_WDOG_DEBUG_MASK 0x4000 /* WDOG_DEBUG */ +#define WM831X_WDOG_DEBUG_SHIFT 14 /* WDOG_DEBUG */ +#define WM831X_WDOG_DEBUG_WIDTH 1 /* WDOG_DEBUG */ +#define WM831X_WDOG_RST_SRC 0x2000 /* WDOG_RST_SRC */ +#define WM831X_WDOG_RST_SRC_MASK 0x2000 /* WDOG_RST_SRC */ +#define WM831X_WDOG_RST_SRC_SHIFT 13 /* WDOG_RST_SRC */ +#define WM831X_WDOG_RST_SRC_WIDTH 1 /* WDOG_RST_SRC */ +#define WM831X_WDOG_SLPENA 0x1000 /* WDOG_SLPENA */ +#define WM831X_WDOG_SLPENA_MASK 0x1000 /* WDOG_SLPENA */ +#define WM831X_WDOG_SLPENA_SHIFT 12 /* WDOG_SLPENA */ +#define WM831X_WDOG_SLPENA_WIDTH 1 /* WDOG_SLPENA */ +#define WM831X_WDOG_RESET 0x0800 /* WDOG_RESET */ +#define WM831X_WDOG_RESET_MASK 0x0800 /* WDOG_RESET */ +#define WM831X_WDOG_RESET_SHIFT 11 /* WDOG_RESET */ +#define WM831X_WDOG_RESET_WIDTH 1 /* WDOG_RESET */ +#define WM831X_WDOG_SECACT_MASK 0x0300 /* WDOG_SECACT - [9:8] */ +#define WM831X_WDOG_SECACT_SHIFT 8 /* WDOG_SECACT - [9:8] */ +#define WM831X_WDOG_SECACT_WIDTH 2 /* WDOG_SECACT - [9:8] */ +#define WM831X_WDOG_PRIMACT_MASK 0x0030 /* WDOG_PRIMACT - [5:4] */ +#define WM831X_WDOG_PRIMACT_SHIFT 4 /* WDOG_PRIMACT - [5:4] */ +#define WM831X_WDOG_PRIMACT_WIDTH 2 /* WDOG_PRIMACT - [5:4] */ +#define WM831X_WDOG_TO_MASK 0x0007 /* WDOG_TO - [2:0] */ +#define WM831X_WDOG_TO_SHIFT 0 /* WDOG_TO - [2:0] */ +#define WM831X_WDOG_TO_WIDTH 3 /* WDOG_TO - [2:0] */ + +#endif -- cgit v1.2.3 From 6952b61de9984073289859073e8195ad0bee8fd5 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Fri, 18 Sep 2009 23:55:55 +0400 Subject: headers: taskstats_kern.h trim Remove net/genetlink.h inclusion, now sched.c won't be recompiled because of some networking changes. Signed-off-by: Alexey Dobriyan Signed-off-by: Linus Torvalds --- include/linux/delayacct.h | 1 - include/linux/taskstats_kern.h | 1 - 2 files changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/delayacct.h b/include/linux/delayacct.h index f352f06fa063..5076fe0c8a96 100644 --- a/include/linux/delayacct.h +++ b/include/linux/delayacct.h @@ -18,7 +18,6 @@ #define _LINUX_DELAYACCT_H #include -#include /* * Per-task flags relevant to delay accounting diff --git a/include/linux/taskstats_kern.h b/include/linux/taskstats_kern.h index 7e9680f4afdd..3398f4553269 100644 --- a/include/linux/taskstats_kern.h +++ b/include/linux/taskstats_kern.h @@ -9,7 +9,6 @@ #include #include -#include #ifdef CONFIG_TASKSTATS extern struct kmem_cache *taskstats_cache; -- cgit v1.2.3 From 5622f295b53fb60dbf9bed3e2c89d182490a8b7f Mon Sep 17 00:00:00 2001 From: Markus Metzger Date: Tue, 15 Sep 2009 13:00:23 +0200 Subject: x86, perf_counter, bts: Optimize BTS overflow handling Draining the BTS buffer on a buffer overflow interrupt takes too long resulting in a kernel lockup when tracing the kernel. Restructure perf_counter sampling into sample creation and sample output. Prepare a single reference sample for BTS sampling and update the from and to address fields when draining the BTS buffer. Drain the entire BTS buffer between a single perf_output_begin() / perf_output_end() pair. Signed-off-by: Markus Metzger Signed-off-by: Peter Zijlstra LKML-Reference: <20090915130023.A16204@sedona.ch.intel.com> Signed-off-by: Ingo Molnar --- include/linux/perf_counter.h | 68 +++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 64 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h index 6c1ef72ea501..c7375f97aa19 100644 --- a/include/linux/perf_counter.h +++ b/include/linux/perf_counter.h @@ -691,6 +691,17 @@ struct perf_cpu_context { int recursion[4]; }; +struct perf_output_handle { + struct perf_counter *counter; + struct perf_mmap_data *data; + unsigned long head; + unsigned long offset; + int nmi; + int sample; + int locked; + unsigned long flags; +}; + #ifdef CONFIG_PERF_COUNTERS /* @@ -722,16 +733,38 @@ extern int hw_perf_group_sched_in(struct perf_counter *group_leader, extern void perf_counter_update_userpage(struct perf_counter *counter); struct perf_sample_data { - struct pt_regs *regs; + u64 type; + + u64 ip; + struct { + u32 pid; + u32 tid; + } tid_entry; + u64 time; u64 addr; + u64 id; + u64 stream_id; + struct { + u32 cpu; + u32 reserved; + } cpu_entry; u64 period; + struct perf_callchain_entry *callchain; struct perf_raw_record *raw; }; +extern void perf_output_sample(struct perf_output_handle *handle, + struct perf_event_header *header, + struct perf_sample_data *data, + struct perf_counter *counter); +extern void perf_prepare_sample(struct perf_event_header *header, + struct perf_sample_data *data, + struct perf_counter *counter, + struct pt_regs *regs); + extern int perf_counter_overflow(struct perf_counter *counter, int nmi, - struct perf_sample_data *data); -extern void perf_counter_output(struct perf_counter *counter, int nmi, - struct perf_sample_data *data); + struct perf_sample_data *data, + struct pt_regs *regs); /* * Return 1 for a software counter, 0 for a hardware counter @@ -781,6 +814,12 @@ extern void perf_tpcounter_event(int event_id, u64 addr, u64 count, #define perf_instruction_pointer(regs) instruction_pointer(regs) #endif +extern int perf_output_begin(struct perf_output_handle *handle, + struct perf_counter *counter, unsigned int size, + int nmi, int sample); +extern void perf_output_end(struct perf_output_handle *handle); +extern void perf_output_copy(struct perf_output_handle *handle, + const void *buf, unsigned int len); #else static inline void perf_counter_task_sched_in(struct task_struct *task, int cpu) { } @@ -807,7 +846,28 @@ static inline void perf_counter_mmap(struct vm_area_struct *vma) { } static inline void perf_counter_comm(struct task_struct *tsk) { } static inline void perf_counter_fork(struct task_struct *tsk) { } static inline void perf_counter_init(void) { } + +static inline int +perf_output_begin(struct perf_output_handle *handle, struct perf_counter *c, + unsigned int size, int nmi, int sample) { } +static inline void perf_output_end(struct perf_output_handle *handle) { } +static inline void +perf_output_copy(struct perf_output_handle *handle, + const void *buf, unsigned int len) { } +static inline void +perf_output_sample(struct perf_output_handle *handle, + struct perf_event_header *header, + struct perf_sample_data *data, + struct perf_counter *counter) { } +static inline void +perf_prepare_sample(struct perf_event_header *header, + struct perf_sample_data *data, + struct perf_counter *counter, + struct pt_regs *regs) { } #endif +#define perf_output_put(handle, x) \ + perf_output_copy((handle), &(x), sizeof(x)) + #endif /* __KERNEL__ */ #endif /* _LINUX_PERF_COUNTER_H */ -- cgit v1.2.3 From fc5377668c3d808e1d53c4aee152c836f55c3490 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 17 Sep 2009 19:35:28 +0200 Subject: tracing: Remove markers Now that the last users of markers have migrated to the event tracer we can kill off the (now orphan) support code. Signed-off-by: Christoph Hellwig Acked-by: Mathieu Desnoyers Cc: Steven Rostedt Cc: Frederic Weisbecker LKML-Reference: <20090917173527.GA1699@lst.de> Signed-off-by: Ingo Molnar --- include/linux/kvm_host.h | 1 - include/linux/marker.h | 221 ----------------------------------------------- include/linux/module.h | 11 --- 3 files changed, 233 deletions(-) delete mode 100644 include/linux/marker.h (limited to 'include/linux') diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 4af56036a6bf..b7bbb5ddd7ae 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -15,7 +15,6 @@ #include #include #include -#include #include #include diff --git a/include/linux/marker.h b/include/linux/marker.h deleted file mode 100644 index b85e74ca782f..000000000000 --- a/include/linux/marker.h +++ /dev/null @@ -1,221 +0,0 @@ -#ifndef _LINUX_MARKER_H -#define _LINUX_MARKER_H - -/* - * Code markup for dynamic and static tracing. - * - * See Documentation/marker.txt. - * - * (C) Copyright 2006 Mathieu Desnoyers - * - * This file is released under the GPLv2. - * See the file COPYING for more details. - */ - -#include -#include - -struct module; -struct marker; - -/** - * marker_probe_func - Type of a marker probe function - * @probe_private: probe private data - * @call_private: call site private data - * @fmt: format string - * @args: variable argument list pointer. Use a pointer to overcome C's - * inability to pass this around as a pointer in a portable manner in - * the callee otherwise. - * - * Type of marker probe functions. They receive the mdata and need to parse the - * format string to recover the variable argument list. - */ -typedef void marker_probe_func(void *probe_private, void *call_private, - const char *fmt, va_list *args); - -struct marker_probe_closure { - marker_probe_func *func; /* Callback */ - void *probe_private; /* Private probe data */ -}; - -struct marker { - const char *name; /* Marker name */ - const char *format; /* Marker format string, describing the - * variable argument list. - */ - char state; /* Marker state. */ - char ptype; /* probe type : 0 : single, 1 : multi */ - /* Probe wrapper */ - void (*call)(const struct marker *mdata, void *call_private, ...); - struct marker_probe_closure single; - struct marker_probe_closure *multi; - const char *tp_name; /* Optional tracepoint name */ - void *tp_cb; /* Optional tracepoint callback */ -} __attribute__((aligned(8))); - -#ifdef CONFIG_MARKERS - -#define _DEFINE_MARKER(name, tp_name_str, tp_cb, format) \ - static const char __mstrtab_##name[] \ - __attribute__((section("__markers_strings"))) \ - = #name "\0" format; \ - static struct marker __mark_##name \ - __attribute__((section("__markers"), aligned(8))) = \ - { __mstrtab_##name, &__mstrtab_##name[sizeof(#name)], \ - 0, 0, marker_probe_cb, { __mark_empty_function, NULL},\ - NULL, tp_name_str, tp_cb } - -#define DEFINE_MARKER(name, format) \ - _DEFINE_MARKER(name, NULL, NULL, format) - -#define DEFINE_MARKER_TP(name, tp_name, tp_cb, format) \ - _DEFINE_MARKER(name, #tp_name, tp_cb, format) - -/* - * Note : the empty asm volatile with read constraint is used here instead of a - * "used" attribute to fix a gcc 4.1.x bug. - * Make sure the alignment of the structure in the __markers section will - * not add unwanted padding between the beginning of the section and the - * structure. Force alignment to the same alignment as the section start. - * - * The "generic" argument controls which marker enabling mechanism must be used. - * If generic is true, a variable read is used. - * If generic is false, immediate values are used. - */ -#define __trace_mark(generic, name, call_private, format, args...) \ - do { \ - DEFINE_MARKER(name, format); \ - __mark_check_format(format, ## args); \ - if (unlikely(__mark_##name.state)) { \ - (*__mark_##name.call) \ - (&__mark_##name, call_private, ## args);\ - } \ - } while (0) - -#define __trace_mark_tp(name, call_private, tp_name, tp_cb, format, args...) \ - do { \ - void __check_tp_type(void) \ - { \ - register_trace_##tp_name(tp_cb); \ - } \ - DEFINE_MARKER_TP(name, tp_name, tp_cb, format); \ - __mark_check_format(format, ## args); \ - (*__mark_##name.call)(&__mark_##name, call_private, \ - ## args); \ - } while (0) - -extern void marker_update_probe_range(struct marker *begin, - struct marker *end); - -#define GET_MARKER(name) (__mark_##name) - -#else /* !CONFIG_MARKERS */ -#define DEFINE_MARKER(name, tp_name, tp_cb, format) -#define __trace_mark(generic, name, call_private, format, args...) \ - __mark_check_format(format, ## args) -#define __trace_mark_tp(name, call_private, tp_name, tp_cb, format, args...) \ - do { \ - void __check_tp_type(void) \ - { \ - register_trace_##tp_name(tp_cb); \ - } \ - __mark_check_format(format, ## args); \ - } while (0) -static inline void marker_update_probe_range(struct marker *begin, - struct marker *end) -{ } -#define GET_MARKER(name) -#endif /* CONFIG_MARKERS */ - -/** - * trace_mark - Marker using code patching - * @name: marker name, not quoted. - * @format: format string - * @args...: variable argument list - * - * Places a marker using optimized code patching technique (imv_read()) - * to be enabled when immediate values are present. - */ -#define trace_mark(name, format, args...) \ - __trace_mark(0, name, NULL, format, ## args) - -/** - * _trace_mark - Marker using variable read - * @name: marker name, not quoted. - * @format: format string - * @args...: variable argument list - * - * Places a marker using a standard memory read (_imv_read()) to be - * enabled. Should be used for markers in code paths where instruction - * modification based enabling is not welcome. (__init and __exit functions, - * lockdep, some traps, printk). - */ -#define _trace_mark(name, format, args...) \ - __trace_mark(1, name, NULL, format, ## args) - -/** - * trace_mark_tp - Marker in a tracepoint callback - * @name: marker name, not quoted. - * @tp_name: tracepoint name, not quoted. - * @tp_cb: tracepoint callback. Should have an associated global symbol so it - * is not optimized away by the compiler (should not be static). - * @format: format string - * @args...: variable argument list - * - * Places a marker in a tracepoint callback. - */ -#define trace_mark_tp(name, tp_name, tp_cb, format, args...) \ - __trace_mark_tp(name, NULL, tp_name, tp_cb, format, ## args) - -/** - * MARK_NOARGS - Format string for a marker with no argument. - */ -#define MARK_NOARGS " " - -/* To be used for string format validity checking with gcc */ -static inline void __printf(1, 2) ___mark_check_format(const char *fmt, ...) -{ -} - -#define __mark_check_format(format, args...) \ - do { \ - if (0) \ - ___mark_check_format(format, ## args); \ - } while (0) - -extern marker_probe_func __mark_empty_function; - -extern void marker_probe_cb(const struct marker *mdata, - void *call_private, ...); - -/* - * Connect a probe to a marker. - * private data pointer must be a valid allocated memory address, or NULL. - */ -extern int marker_probe_register(const char *name, const char *format, - marker_probe_func *probe, void *probe_private); - -/* - * Returns the private data given to marker_probe_register. - */ -extern int marker_probe_unregister(const char *name, - marker_probe_func *probe, void *probe_private); -/* - * Unregister a marker by providing the registered private data. - */ -extern int marker_probe_unregister_private_data(marker_probe_func *probe, - void *probe_private); - -extern void *marker_get_private_data(const char *name, marker_probe_func *probe, - int num); - -/* - * marker_synchronize_unregister must be called between the last marker probe - * unregistration and the first one of - * - the end of module exit function - * - the free of any resource used by the probes - * to ensure the code and data are valid for any possibly running probes. - */ -#define marker_synchronize_unregister() synchronize_sched() - -#endif diff --git a/include/linux/module.h b/include/linux/module.h index f8f92d015efe..1c755b2f937d 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -15,7 +15,6 @@ #include #include #include -#include #include #include @@ -327,10 +326,6 @@ struct module /* The command line arguments (may be mangled). People like keeping pointers to this stuff */ char *args; -#ifdef CONFIG_MARKERS - struct marker *markers; - unsigned int num_markers; -#endif #ifdef CONFIG_TRACEPOINTS struct tracepoint *tracepoints; unsigned int num_tracepoints; @@ -535,8 +530,6 @@ int unregister_module_notifier(struct notifier_block * nb); extern void print_modules(void); -extern void module_update_markers(void); - extern void module_update_tracepoints(void); extern int module_get_iter_tracepoints(struct tracepoint_iter *iter); @@ -651,10 +644,6 @@ static inline void print_modules(void) { } -static inline void module_update_markers(void) -{ -} - static inline void module_update_tracepoints(void) { } -- cgit v1.2.3 From 6a891a3111fe701517bb31c2204304724c7299c8 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 18 Sep 2009 22:45:43 +0200 Subject: i2c: Drop unused i2c_driver.id field Nobody is using i2c_driver.id any longer, so we can drop that field. Signed-off-by: Jean Delvare --- include/linux/i2c-id.h | 11 ----------- include/linux/i2c.h | 2 -- 2 files changed, 13 deletions(-) (limited to 'include/linux') diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index c9087de5c6c6..e844a0b18695 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -27,17 +27,6 @@ legacy chip driver needs to identify a bus or a bus driver needs to identify a legacy client. If you don't need them, just don't set them. */ -/* - * ---- Driver types ----------------------------------------------------- - */ - -#define I2C_DRIVERID_MSP3400 1 -#define I2C_DRIVERID_TUNER 2 -#define I2C_DRIVERID_TDA7432 27 /* Stereo sound processor */ -#define I2C_DRIVERID_TVAUDIO 29 /* Generic TV sound driver */ -#define I2C_DRIVERID_SAA711X 73 /* saa711x video encoders */ -#define I2C_DRIVERID_INFRARED 75 /* I2C InfraRed on Video boards */ - /* * ---- Adapter types ---------------------------------------------------- */ diff --git a/include/linux/i2c.h b/include/linux/i2c.h index f4784c0fe975..57d41b0abce2 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -98,7 +98,6 @@ extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client, /** * struct i2c_driver - represent an I2C device driver - * @id: Unique driver ID (optional) * @class: What kind of i2c device we instantiate (for detect) * @attach_adapter: Callback for bus addition (for legacy drivers) * @detach_adapter: Callback for bus removal (for legacy drivers) @@ -135,7 +134,6 @@ extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client, * not allowed. */ struct i2c_driver { - int id; unsigned int class; /* Notifies the driver that a new bus has appeared or is about to be -- cgit v1.2.3 From 76b3e28fa728bb68895cbd8375f5ce233bd891de Mon Sep 17 00:00:00 2001 From: Crane Cai Date: Fri, 18 Sep 2009 22:45:50 +0200 Subject: i2c-piix4: Add AMD SB900 SMBus device ID Add new SMBus device ID for AMD SB900. Signed-off-by: Crane Cai Signed-off-by: Jean Delvare --- include/linux/pci_ids.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 3b6b788fe2b5..7803565aa877 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -543,6 +543,7 @@ #define PCI_DEVICE_ID_AMD_8131_BRIDGE 0x7450 #define PCI_DEVICE_ID_AMD_8131_APIC 0x7451 #define PCI_DEVICE_ID_AMD_8132_BRIDGE 0x7458 +#define PCI_DEVICE_ID_AMD_SB900_SMBUS 0x780b #define PCI_DEVICE_ID_AMD_CS5535_IDE 0x208F #define PCI_DEVICE_ID_AMD_CS5536_ISA 0x2090 #define PCI_DEVICE_ID_AMD_CS5536_FLASH 0x2091 -- cgit v1.2.3 From ee2b805c8eb6459cf541ef141ff70dae17af59ca Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sat, 15 Aug 2009 15:12:05 +0100 Subject: ARM: 5678/1: SSP/SPI PL022 polarity terminology fix The definition of the SPI clock phase for the Motorola mode of the PL022 driver was incorrect: the spec had been interpreted as data being recieved on rising or falling edge of the clocks while the correct interpretation is that data can be recieved on the first or second edge transition, falling or rising depending on the polarity setting. Signed-off-by: Linus Walleij Signed-off-by: Russell King --- include/linux/amba/pl022.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h index dcad0ffd1755..e4836c6b3dd7 100644 --- a/include/linux/amba/pl022.h +++ b/include/linux/amba/pl022.h @@ -136,12 +136,12 @@ enum ssp_tx_level_trig { /** * enum SPI Clock Phase - clock phase (Motorola SPI interface only) - * @SSP_CLK_RISING_EDGE: Receive data on rising edge - * @SSP_CLK_FALLING_EDGE: Receive data on falling edge + * @SSP_CLK_FIRST_EDGE: Receive data on first edge transition (actual direction depends on polarity) + * @SSP_CLK_SECOND_EDGE: Receive data on second edge transition (actual direction depends on polarity) */ enum ssp_spi_clk_phase { - SSP_CLK_RISING_EDGE, - SSP_CLK_FALLING_EDGE + SSP_CLK_FIRST_EDGE, + SSP_CLK_SECOND_EDGE }; /** -- cgit v1.2.3 From b6e760f3097501e60e76fbcb7a313d42da930c1f Mon Sep 17 00:00:00 2001 From: Patrick Boettcher Date: Mon, 3 Aug 2009 14:39:15 -0300 Subject: V4L/DVB (12892): DVB-API: add support for ISDB-T and ISDB-Tsb (version 5.1) This patch increments the DVB-API to version 5.1 in order to reflect the addition of ISDB-T and ISDB-Tsb on Linux' DVB-API. Changes in detail: - added a small document to describe how to use the API to tune to an ISDB-T or ISDB-Tsb channel - added necessary fields to dtv_frontend_cache - added a smarter clear-cache function which resets all fields of the dtv_frontend_cache - added a TRANSMISSION_MODE_4K to fe_transmit_mode_t Signed-off-by: Olivier Grenie Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- include/linux/dvb/frontend.h | 44 +++++++++++++++++++++++++++++++++++--------- include/linux/dvb/version.h | 2 +- 2 files changed, 36 insertions(+), 10 deletions(-) (limited to 'include/linux') diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index 51c8d2d49e42..25b01c14727b 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -173,7 +173,8 @@ typedef enum fe_modulation { typedef enum fe_transmit_mode { TRANSMISSION_MODE_2K, TRANSMISSION_MODE_8K, - TRANSMISSION_MODE_AUTO + TRANSMISSION_MODE_AUTO, + TRANSMISSION_MODE_4K } fe_transmit_mode_t; typedef enum fe_bandwidth { @@ -268,15 +269,40 @@ struct dvb_frontend_event { #define DTV_FE_CAPABILITY 16 #define DTV_DELIVERY_SYSTEM 17 -#define DTV_API_VERSION 35 -#define DTV_API_VERSION 35 -#define DTV_CODE_RATE_HP 36 -#define DTV_CODE_RATE_LP 37 -#define DTV_GUARD_INTERVAL 38 -#define DTV_TRANSMISSION_MODE 39 -#define DTV_HIERARCHY 40 +/* ISDB-T and ISDB-Tsb */ +#define DTV_ISDBT_PARTIAL_RECEPTION 18 +#define DTV_ISDBT_SOUND_BROADCASTING 19 -#define DTV_MAX_COMMAND DTV_HIERARCHY +#define DTV_ISDBT_SB_SUBCHANNEL_ID 20 +#define DTV_ISDBT_SB_SEGMENT_IDX 21 +#define DTV_ISDBT_SB_SEGMENT_COUNT 22 + +#define DTV_ISDBT_LAYERA_FEC 23 +#define DTV_ISDBT_LAYERA_MODULATION 24 +#define DTV_ISDBT_LAYERA_SEGMENT_COUNT 25 +#define DTV_ISDBT_LAYERA_TIME_INTERLEAVING 26 + +#define DTV_ISDBT_LAYERB_FEC 27 +#define DTV_ISDBT_LAYERB_MODULATION 28 +#define DTV_ISDBT_LAYERB_SEGMENT_COUNT 29 +#define DTV_ISDBT_LAYERB_TIME_INTERLEAVING 30 + +#define DTV_ISDBT_LAYERC_FEC 31 +#define DTV_ISDBT_LAYERC_MODULATION 32 +#define DTV_ISDBT_LAYERC_SEGMENT_COUNT 33 +#define DTV_ISDBT_LAYERC_TIME_INTERLEAVING 34 + +#define DTV_API_VERSION 35 + +#define DTV_CODE_RATE_HP 36 +#define DTV_CODE_RATE_LP 37 +#define DTV_GUARD_INTERVAL 38 +#define DTV_TRANSMISSION_MODE 39 +#define DTV_HIERARCHY 40 + +#define DTV_ISDBT_LAYER_ENABLED 41 + +#define DTV_MAX_COMMAND DTV_ISDBT_LAYER_ENABLED typedef enum fe_pilot { PILOT_ON, diff --git a/include/linux/dvb/version.h b/include/linux/dvb/version.h index 25b823b81734..540b0583d9fb 100644 --- a/include/linux/dvb/version.h +++ b/include/linux/dvb/version.h @@ -24,6 +24,6 @@ #define _DVBVERSION_H_ #define DVB_API_VERSION 5 -#define DVB_API_VERSION_MINOR 0 +#define DVB_API_VERSION_MINOR 1 #endif /*_DVBVERSION_H_*/ -- cgit v1.2.3 From 9afef394308cf63ddb67b003a1c6036615456eb9 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Sat, 9 May 2009 13:24:12 -0300 Subject: V4L/DVB (12922): Add the SAA7164 I2C bus identifier Add the SAA7164 I2C bus identifier Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- include/linux/i2c-id.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index c9087de5c6c6..271b67a3167e 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -53,6 +53,7 @@ #define I2C_HW_B_AU0828 0x010023 /* auvitek au0828 usb bridge */ #define I2C_HW_B_CX231XX 0x010024 /* Conexant CX231XX USB based cards */ #define I2C_HW_B_HDPVR 0x010025 /* Hauppauge HD PVR */ +#define I2C_HW_B_SAA7164 0x010024 /* NXP 7164 based tv cards */ /* --- SGI adapters */ #define I2C_HW_SGI_VINO 0x160000 -- cgit v1.2.3 From c9230457a98f33fe3658fd0bd9b9ceffdd97b63b Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Thu, 17 Sep 2009 15:05:38 -0300 Subject: V4L/DVB (12974): SAA7164: Remove the SAA7164 bus id, no longer required. SAA7164: Remove the SAA7164 bus id, no longer required. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- include/linux/i2c-id.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index 271b67a3167e..c9087de5c6c6 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -53,7 +53,6 @@ #define I2C_HW_B_AU0828 0x010023 /* auvitek au0828 usb bridge */ #define I2C_HW_B_CX231XX 0x010024 /* Conexant CX231XX USB based cards */ #define I2C_HW_B_HDPVR 0x010025 /* Hauppauge HD PVR */ -#define I2C_HW_B_SAA7164 0x010024 /* NXP 7164 based tv cards */ /* --- SGI adapters */ #define I2C_HW_SGI_VINO 0x160000 -- cgit v1.2.3 From 3418f165cc1cbcb30a8c017d7ebbc774710066bb Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 25 Aug 2009 11:44:14 -0300 Subject: V4L/DVB (12511): V4L2: add a new V4L2_CID_BAND_STOP_FILTER integer control Add a new V4L2_CID_BAND_STOP_FILTER integer control, which either switches the band-stop filter off, or sets it to a certain strength. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- include/linux/videodev2.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 3689d7d81fe9..b59e78c57161 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -910,9 +910,10 @@ enum v4l2_colorfx { V4L2_COLORFX_SEPIA = 2, }; #define V4L2_CID_AUTOBRIGHTNESS (V4L2_CID_BASE+32) +#define V4L2_CID_BAND_STOP_FILTER (V4L2_CID_BASE+33) /* last CID + 1 */ -#define V4L2_CID_LASTP1 (V4L2_CID_BASE+33) +#define V4L2_CID_LASTP1 (V4L2_CID_BASE+34) /* MPEG-class control IDs defined by V4L2 */ #define V4L2_CID_MPEG_BASE (V4L2_CTRL_CLASS_MPEG | 0x900) -- cgit v1.2.3 From 98293ef3e54f9f2175f11b4d14c119a2ff753d61 Mon Sep 17 00:00:00 2001 From: HIRANO Takahito Date: Fri, 18 Sep 2009 11:17:54 -0300 Subject: V4L/DVB (12997): Add the DTV_ISDB_TS_ID property for ISDB_S In ISDB-S, time-devision duplex is used to multiplexing several waves in the same frequency. Each wave is identified by its own transport stream ID, or TS ID. We need to provide some way to specify this ID from user applications to handle ISDB-S frontends. This code has been tested with the Earthsoft PT1 driver. [mchehab@infradead.org: Fix merge conflicts with isdbt and rename the new parameter to DTV_ISDBS_TS_ID] Signed-off-by: HIRANO Takahito Signed-off-by: Mauro Carvalho Chehab --- include/linux/dvb/frontend.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index 25b01c14727b..b6cb5425cde3 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -302,7 +302,9 @@ struct dvb_frontend_event { #define DTV_ISDBT_LAYER_ENABLED 41 -#define DTV_MAX_COMMAND DTV_ISDBT_LAYER_ENABLED +#define DTV_ISDBS_TS_ID 42 + +#define DTV_MAX_COMMAND DTV_ISDBS_TS_ID typedef enum fe_pilot { PILOT_ON, -- cgit v1.2.3 From eb27cae8adaa658a0bf31631baa1ce29d8183759 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Mon, 6 Jul 2009 23:40:19 -0400 Subject: ACPI: linux/acpi.h should not include linux/dmi.h users of acpi.h that need dmi.h should include it directly. Signed-off-by: Len Brown --- include/linux/acpi.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 34321cfffeab..7950c65c43af 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -41,8 +41,6 @@ #include #include #include -#include - enum acpi_irq_model_id { ACPI_IRQ_MODEL_PIC = 0, -- cgit v1.2.3 From e4f55966d02c5dfade2978c2aa05fb202a78a4d1 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Mon, 6 Jul 2009 23:42:10 -0400 Subject: ACPI: remove unnecessary #ifdef CONFIG_DMI acpi_osi_setup() does not depend on CONFIG_DMI acpi_dmi_osi_linux()'s definition doesn't depend on CONFIG_DMI either Signed-off-by: Len Brown --- include/linux/acpi.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 7950c65c43af..9260408bf4ea 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -217,10 +217,8 @@ static inline int acpi_video_display_switch_support(void) #endif /* defined(CONFIG_ACPI_VIDEO) || defined(CONFIG_ACPI_VIDEO_MODULE) */ extern int acpi_blacklisted(void); -#ifdef CONFIG_DMI extern void acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d); extern int acpi_osi_setup(char *str); -#endif #ifdef CONFIG_ACPI_NUMA int acpi_get_pxm(acpi_handle handle); -- cgit v1.2.3 From a71fca58b7f4abca551ae2256ac08dd9123a03f9 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Fri, 18 Sep 2009 10:28:19 -0700 Subject: rcu: Fix whitespace inconsistencies Fix a number of whitespace ^Ierrors in the include/linux/rcu* and the kernel/rcu* files. Signed-off-by: Paul E. McKenney Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu LKML-Reference: <20090918172819.GA24405@linux.vnet.ibm.com> [ did more checkpatch fixlets ] Signed-off-by: Ingo Molnar --- include/linux/rculist_nulls.h | 2 +- include/linux/rcupdate.h | 6 +++--- include/linux/rcutree.h | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/rculist_nulls.h b/include/linux/rculist_nulls.h index f9ddd03961a8..589a40919f01 100644 --- a/include/linux/rculist_nulls.h +++ b/include/linux/rculist_nulls.h @@ -102,7 +102,7 @@ static inline void hlist_nulls_add_head_rcu(struct hlist_nulls_node *n, */ #define hlist_nulls_for_each_entry_rcu(tpos, pos, head, member) \ for (pos = rcu_dereference((head)->first); \ - (!is_a_nulls(pos)) && \ + (!is_a_nulls(pos)) && \ ({ tpos = hlist_nulls_entry(pos, typeof(*tpos), member); 1; }); \ pos = rcu_dereference(pos->next)) diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 39dce83c4865..6fe0363724e9 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -1,5 +1,5 @@ /* - * Read-Copy Update mechanism for mutual exclusion + * Read-Copy Update mechanism for mutual exclusion * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -18,7 +18,7 @@ * Copyright IBM Corporation, 2001 * * Author: Dipankar Sarma - * + * * Based on the original work by Paul McKenney * and inputs from Rusty Russell, Andrea Arcangeli and Andi Kleen. * Papers: @@ -26,7 +26,7 @@ * http://lse.sourceforge.net/locking/rclock_OLS.2001.05.01c.sc.pdf (OLS2001) * * For detailed explanation of Read-Copy Update mechanism see - - * http://lse.sourceforge.net/locking/rcupdate.html + * http://lse.sourceforge.net/locking/rcupdate.html * */ diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h index 00d08c0cbcc1..37682770e9d2 100644 --- a/include/linux/rcutree.h +++ b/include/linux/rcutree.h @@ -24,7 +24,7 @@ * and inputs from Rusty Russell, Andrea Arcangeli and Andi Kleen. * * For detailed explanation of Read-Copy Update mechanism see - - * Documentation/RCU + * Documentation/RCU */ #ifndef __LINUX_RCUTREE_H -- cgit v1.2.3 From 393b2ad8c757ba3ccd2a99ca5bbcd6db4d3fa53d Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Sat, 12 Sep 2009 07:52:47 +0200 Subject: perf: Add a timestamp to fork events perf timechart needs to know when a process forked, in order to be able to visualize properly when tasks start. This patch adds a time field to the event structure, and fills it in appropriately. Signed-off-by: Arjan van de Ven Acked-by: Peter Zijlstra Cc: Paul Mackerras Cc: Frederic Weisbecker LKML-Reference: <20090912130341.51ad2de2@infradead.org> Signed-off-by: Ingo Molnar --- include/linux/perf_counter.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h index c7375f97aa19..bd341007c4fc 100644 --- a/include/linux/perf_counter.h +++ b/include/linux/perf_counter.h @@ -336,6 +336,7 @@ enum perf_event_type { * struct perf_event_header header; * u32 pid, ppid; * u32 tid, ptid; + * u64 time; * }; */ PERF_EVENT_EXIT = 4, @@ -356,6 +357,7 @@ enum perf_event_type { * struct perf_event_header header; * u32 pid, ppid; * u32 tid, ptid; + * { u64 time; } && PERF_SAMPLE_TIME * }; */ PERF_EVENT_FORK = 7, -- cgit v1.2.3 From 778dbcc1ebea6f9a560020110987449bf4607e5f Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Fri, 18 Sep 2009 12:51:44 -0700 Subject: mtd: onenand: make onenand/generic.c more generic Remove the ARM dependency from the generic "onenand" platform device driver. This change makes the driver useful for other architectures as well. Needed for the SuperH kfr2r09 board. Apart from the obvious Kconfig bits, the most important change is the move away from ARM specific includes and platform data. Together with this change the only in-tree board code gets an update, and the driver name is also changed gracefully break potential out of tree drivers. The driver is also updated to allow NULL as platform data together with a few changes to make use of resource_size() and dev_name(). Signed-off-by: Magnus Damm Cc: Paul Mundt Cc: Tony Lindgren Cc: Kyungmin Park Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- include/linux/mtd/onenand.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h index 8ed873374381..4e49f3350678 100644 --- a/include/linux/mtd/onenand.h +++ b/include/linux/mtd/onenand.h @@ -214,4 +214,12 @@ unsigned onenand_block(struct onenand_chip *this, loff_t addr); loff_t onenand_addr(struct onenand_chip *this, int block); int flexonenand_region(struct mtd_info *mtd, loff_t addr); +struct mtd_partition; + +struct onenand_platform_data { + void (*mmcontrol)(struct mtd_info *mtd, int sync_read); + struct mtd_partition *parts; + unsigned int nr_parts; +}; + #endif /* __LINUX_MTD_ONENAND_H */ -- cgit v1.2.3 From 46a8cf2df2232c0051f29716ff8a166ebeb08daf Mon Sep 17 00:00:00 2001 From: Sneha Narnakaje Date: Fri, 18 Sep 2009 12:51:46 -0700 Subject: mtd: nand: add "page" parameter to all read_page/read_page_raw APIs This patch adds a new "page" parameter to all NAND read_page/read_page_raw APIs. The read_page API for the new mode ECC_HW_OOB_FIRST requires the page information to send the READOOB command and read the OOB area before the data area. Reviewed-by: David Brownell Signed-off-by: Sneha Narnakaje Signed-off-by: Sandeep Paulraj Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- include/linux/mtd/nand.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 4030ebada49e..686f3701f2f4 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -271,13 +271,13 @@ struct nand_ecc_ctrl { uint8_t *calc_ecc); int (*read_page_raw)(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf); + uint8_t *buf, int page); void (*write_page_raw)(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf); int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf); + uint8_t *buf, int page); int (*read_subpage)(struct mtd_info *mtd, struct nand_chip *chip, uint32_t offs, uint32_t len, -- cgit v1.2.3 From 6e0cb135b3f3713b95ea41a11155e83a8c70f5f8 Mon Sep 17 00:00:00 2001 From: Sneha Narnakaje Date: Fri, 18 Sep 2009 12:51:47 -0700 Subject: mtd: nand: add new ECC mode - ECC_HW_OOB_FIRST This patch adds the new mode NAND_ECC_HW_OOB_FIRST in the nand code to support 4-bit ECC on TI DaVinci devices with large page (up to 2KiB) NAND chips. This ECC mode is similar to NAND_ECC_HW, with the exception of read_page API that first reads the OOB area, reads the data in chunks, feeds the ECC from OOB area to the ECC hw engine and perform any correction on the data as per the ECC status reported by the engine. "ECC_HW_OOB_FIRST" name suggested by Thomas Gleixner Reviewed-by: David Brownell Signed-off-by: Sneha Narnakaje Signed-off-by: Sandeep Paulraj Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- include/linux/mtd/nand.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 686f3701f2f4..7a232a9bdd62 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -121,6 +121,7 @@ typedef enum { NAND_ECC_SOFT, NAND_ECC_HW, NAND_ECC_HW_SYNDROME, + NAND_ECC_HW_OOB_FIRST, } nand_ecc_modes_t; /* -- cgit v1.2.3 From e454cea20bdcff10ee698d11b8882662a0153a47 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Fri, 18 Sep 2009 23:01:12 +0200 Subject: Driver-Core: extend devnode callbacks to provide permissions This allows subsytems to provide devtmpfs with non-default permissions for the device node. Instead of the default mode of 0600, null, zero, random, urandom, full, tty, ptmx now have a mode of 0666, which allows non-privileged processes to access standard device nodes in case no other userspace process applies the expected permissions. This also fixes a wrong assignment in pktcdvd and a checkpatch.pl complain. Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- include/linux/device.h | 7 ++++--- include/linux/genhd.h | 2 +- include/linux/miscdevice.h | 3 ++- include/linux/usb.h | 4 ++-- 4 files changed, 9 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/device.h b/include/linux/device.h index 847b763e40e9..aca31bf7d8ed 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -193,7 +193,7 @@ struct class { struct kobject *dev_kobj; int (*dev_uevent)(struct device *dev, struct kobj_uevent_env *env); - char *(*nodename)(struct device *dev); + char *(*devnode)(struct device *dev, mode_t *mode); void (*class_release)(struct class *class); void (*dev_release)(struct device *dev); @@ -298,7 +298,7 @@ struct device_type { const char *name; const struct attribute_group **groups; int (*uevent)(struct device *dev, struct kobj_uevent_env *env); - char *(*nodename)(struct device *dev); + char *(*devnode)(struct device *dev, mode_t *mode); void (*release)(struct device *dev); const struct dev_pm_ops *pm; @@ -487,7 +487,8 @@ extern struct device *device_find_child(struct device *dev, void *data, extern int device_rename(struct device *dev, char *new_name); extern int device_move(struct device *dev, struct device *new_parent, enum dpm_order dpm_order); -extern const char *device_get_nodename(struct device *dev, const char **tmp); +extern const char *device_get_devnode(struct device *dev, + mode_t *mode, const char **tmp); extern void *dev_get_drvdata(const struct device *dev); extern void dev_set_drvdata(struct device *dev, void *data); diff --git a/include/linux/genhd.h b/include/linux/genhd.h index 44263cb27121..109d179adb93 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -142,7 +142,7 @@ struct gendisk { * disks that can't be partitioned. */ char disk_name[DISK_NAME_LEN]; /* name of major driver */ - char *(*nodename)(struct gendisk *gd); + char *(*devnode)(struct gendisk *gd, mode_t *mode); /* Array of pointers to partitions indexed by partno. * Protected with matching bdev lock but stat and other * non-critical accesses use RCU. Always access through diff --git a/include/linux/miscdevice.h b/include/linux/miscdevice.h index 052117744629..adaf3c15e449 100644 --- a/include/linux/miscdevice.h +++ b/include/linux/miscdevice.h @@ -41,7 +41,8 @@ struct miscdevice { struct list_head list; struct device *parent; struct device *this_device; - const char *devnode; + const char *nodename; + mode_t mode; }; extern int misc_register(struct miscdevice * misc); diff --git a/include/linux/usb.h b/include/linux/usb.h index b1e3c2fbfe11..a8fe05f224e5 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -922,7 +922,7 @@ extern struct bus_type usb_bus_type; /** * struct usb_class_driver - identifies a USB driver that wants to use the USB major number * @name: the usb class device name for this driver. Will show up in sysfs. - * @nodename: Callback to provide a naming hint for a possible + * @devnode: Callback to provide a naming hint for a possible * device node to create. * @fops: pointer to the struct file_operations of this driver. * @minor_base: the start of the minor range for this driver. @@ -933,7 +933,7 @@ extern struct bus_type usb_bus_type; */ struct usb_class_driver { char *name; - char *(*nodename)(struct device *dev); + char *(*devnode)(struct device *dev, mode_t *mode); const struct file_operations *fops; int minor_base; }; -- cgit v1.2.3 From f0eefdc30e55e761facf645bd1be1339b21c30e6 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Sat, 19 Sep 2009 13:13:13 -0700 Subject: cyclades: avoid addresses recomputation Don't fetch firmware address and recompute channel control on each port access. Precompute the values on init and use them later all the time. The same for board control. This simplify code and improves readability. Signed-off-by: Jiri Slaby Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/cyclades.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h index 1fbdea4f08eb..1eb87a6a2f6b 100644 --- a/include/linux/cyclades.h +++ b/include/linux/cyclades.h @@ -499,6 +499,7 @@ struct cyclades_card { void __iomem *p9050; struct RUNTIME_9060 __iomem *p9060; } ctl_addr; + struct BOARD_CTRL __iomem *board_ctrl; /* cyz specific */ int irq; unsigned int num_chips; /* 0 if card absent, -1 if Z/PCI, else Y */ unsigned int first_line; /* minor number of first channel on card */ @@ -541,6 +542,15 @@ struct cyclades_port { int magic; struct tty_port port; struct cyclades_card *card; + union { + struct { + int filler; + } cyy; + struct { + struct CH_CTRL __iomem *ch_ctrl; + struct BUF_CTRL __iomem *buf_ctrl; + } cyz; + } u; int line; int flags; /* defined in tty.h */ int type; /* UART type */ -- cgit v1.2.3 From 3aeea5b92210083c7cffd4f08a0bb141d3f2d574 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Sat, 19 Sep 2009 13:13:16 -0700 Subject: cyclades: introduce cyy_readb/writeb Add helpers for io operations, so that we can eliminate huge amount of supporting code. It is now centralized in those helpers and used values are precomputed in the init phase. Signed-off-by: Jiri Slaby Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/cyclades.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h index 1eb87a6a2f6b..bbebef7713b3 100644 --- a/include/linux/cyclades.h +++ b/include/linux/cyclades.h @@ -544,7 +544,7 @@ struct cyclades_port { struct cyclades_card *card; union { struct { - int filler; + void __iomem *base_addr; } cyy; struct { struct CH_CTRL __iomem *ch_ctrl; -- cgit v1.2.3 From f8a7c1a976a6672204c7f4f0f694f33715dfa617 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sat, 19 Sep 2009 13:13:17 -0700 Subject: kfifo: Use "const" definitions Currently kfifo cannot be used by parts of the kernel that use "const" properly as kfifo itself does not use const for passed data blocks which are indeed const. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/kfifo.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h index 29f62e1733ff..ad6bdf5a5970 100644 --- a/include/linux/kfifo.h +++ b/include/linux/kfifo.h @@ -38,7 +38,7 @@ extern struct kfifo *kfifo_alloc(unsigned int size, gfp_t gfp_mask, spinlock_t *lock); extern void kfifo_free(struct kfifo *fifo); extern unsigned int __kfifo_put(struct kfifo *fifo, - unsigned char *buffer, unsigned int len); + const unsigned char *buffer, unsigned int len); extern unsigned int __kfifo_get(struct kfifo *fifo, unsigned char *buffer, unsigned int len); @@ -77,7 +77,7 @@ static inline void kfifo_reset(struct kfifo *fifo) * bytes copied. */ static inline unsigned int kfifo_put(struct kfifo *fifo, - unsigned char *buffer, unsigned int len) + const unsigned char *buffer, unsigned int len) { unsigned long flags; unsigned int ret; -- cgit v1.2.3 From 1c2f04937b3e397a5695953c6b82aa4c77d21eb8 Mon Sep 17 00:00:00 2001 From: Vikram Pandita Date: Sat, 19 Sep 2009 13:13:19 -0700 Subject: serial: 8250: add IRQ trigger support There is currently no provision for passing IRQ trigger flags for serial IRQs with triggering requirements (such as GPIO IRQs) This patch adds irqflags to plat_serial8250_port that can be passed from board file to reqest_irq() of 8250 driver Changes are backward compatible with boards passing UPF_SHARE_IRQ flag Tested on Zoom2 board that has IRQF_TRIGGER_RISING requirement for 8250 irq [Moved new flag to end to fix bugs in the original with the old_serial array -- Alan] Signed-off-by: Vikram Pandita Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_8250.h | 1 + include/linux/serial_core.h | 1 + 2 files changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h index d4d2a78ad43e..fb46aba11fb5 100644 --- a/include/linux/serial_8250.h +++ b/include/linux/serial_8250.h @@ -22,6 +22,7 @@ struct plat_serial8250_port { void __iomem *membase; /* ioremap cookie or NULL */ resource_size_t mapbase; /* resource base */ unsigned int irq; /* interrupt number */ + unsigned long irqflags; /* request_irq flags */ unsigned int uartclk; /* UART clock rate */ void *private_data; unsigned char regshift; /* register shift */ diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 23d2fb051f97..3cd255f0b211 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -265,6 +265,7 @@ struct uart_port { unsigned int (*serial_in)(struct uart_port *, int); void (*serial_out)(struct uart_port *, int, int); unsigned int irq; /* irq number */ + unsigned long irqflags; /* irq flags */ unsigned int uartclk; /* base uart clock */ unsigned int fifosize; /* tx fifo size */ unsigned char x_char; /* xon/xoff char */ -- cgit v1.2.3 From 7ca0ff9ab3218ec443a7a9ad247e4650373ed41e Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sat, 19 Sep 2009 13:13:20 -0700 Subject: tty: Add a full port_close function Now we are extracting out methods for shutdown and the like we can add a proper tty_port_close method that knows all the innards of the tty closing process and hides the lot from the caller. At some point in the future this will be paired with a similar open() helper and the drivers can stick to hardware management. Signed-off-by: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman --- include/linux/tty.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/tty.h b/include/linux/tty.h index a916a318004e..ecb3d1ba3017 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -187,7 +187,12 @@ struct tty_port; struct tty_port_operations { /* Return 1 if the carrier is raised */ int (*carrier_raised)(struct tty_port *port); + /* Control the DTR line */ void (*dtr_rts)(struct tty_port *port, int raise); + /* Called when the last close completes or a hangup finishes + IFF the port was initialized. Do not use to free resources */ + void (*shutdown)(struct tty_port *port); + void (*drop)(struct tty_port *port); }; struct tty_port { @@ -459,7 +464,8 @@ extern int tty_port_block_til_ready(struct tty_port *port, extern int tty_port_close_start(struct tty_port *port, struct tty_struct *tty, struct file *filp); extern void tty_port_close_end(struct tty_port *port, struct tty_struct *tty); - +extern void tty_port_close(struct tty_port *port, + struct tty_struct *tty, struct file *filp); extern int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc); extern int tty_unregister_ldisc(int disc); extern int tty_set_ldisc(struct tty_struct *tty, int ldisc); -- cgit v1.2.3 From 8b92e87d39bfd046e7581e1fe0f40eac40f88608 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sat, 19 Sep 2009 13:13:24 -0700 Subject: vt: add an event interface This is needed and requested in various forms for ConsoleKit, screenblank handling and the like so do the job with a single interface. Also build the interface so that unlike VT_WAITACTIVE and friends it won't miss events. FIXME: Should this be a waitactive ioctl or a new device file you can poll and read events from. We need the code anyway to fix up the existing broken wait for console switch logic but the ConsoleKit people would prefer the new device to the ioctl we have here Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/vt.h | 14 ++++++++++++++ include/linux/vt_kern.h | 3 ++- 2 files changed, 16 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/vt.h b/include/linux/vt.h index 02c1c0288770..89c03a11e193 100644 --- a/include/linux/vt.h +++ b/include/linux/vt.h @@ -74,4 +74,18 @@ struct vt_consize { #define VT_UNLOCKSWITCH 0x560C /* allow vt switching */ #define VT_GETHIFONTMASK 0x560D /* return hi font mask */ +struct vt_event { + unsigned int event; +#define VT_EVENT_SWITCH 0x0001 /* Console switch */ +#define VT_EVENT_BLANK 0x0002 /* Screen blank */ +#define VT_EVENT_UNBLANK 0x0004 /* Screen unblank */ +#define VT_EVENT_RESIZE 0x0008 /* Resize display */ +#define VT_MAX_EVENT 0x000F + unsigned int old; /* Old console */ + unsigned int new; /* New console (if changing) */ + unsigned int pad[4]; /* Padding for expansion */ +}; + +#define VT_WAITEVENT 0x560E /* Wait for an event */ + #endif /* _LINUX_VT_H */ diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h index 2f1113467f70..f8c797d57c8b 100644 --- a/include/linux/vt_kern.h +++ b/include/linux/vt_kern.h @@ -91,7 +91,8 @@ int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc); #endif /* vt.c */ -int vt_waitactive(int vt); +void vt_event_post(unsigned int event, unsigned int old, unsigned int new); +int vt_waitactive(int n); void change_console(struct vc_data *new_vc); void reset_vc(struct vc_data *vc); extern int unbind_con_driver(const struct consw *csw, int first, int last, -- cgit v1.2.3 From 8d233558cd99a888571bb5a88a74970879e0aba4 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sat, 19 Sep 2009 13:13:25 -0700 Subject: vt: remove power stuff from kernel/power In the past someone gratuitiously borrowed chunks of kernel internal vt code and dumped them in kernel/power. They have all sorts of deep relations with the vt code so put them in the vt tree instead Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/vt_kern.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h index f8c797d57c8b..5b53efe41b5c 100644 --- a/include/linux/vt_kern.h +++ b/include/linux/vt_kern.h @@ -117,4 +117,5 @@ struct vt_spawn_console { }; extern struct vt_spawn_console vt_spawn_con; +extern int vt_move_to_console(unsigned int vt, int alloc); #endif /* _VT_KERN_H */ -- cgit v1.2.3 From a5eb56242d1e2d82938a066219ac1cdf0d68adc8 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sat, 19 Sep 2009 13:13:25 -0700 Subject: vt: move kernel stuff out of vt.h We have vt_kern.h for this Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/vt.h | 11 ----------- include/linux/vt_kern.h | 12 ++++++++++++ 2 files changed, 12 insertions(+), 11 deletions(-) (limited to 'include/linux') diff --git a/include/linux/vt.h b/include/linux/vt.h index 89c03a11e193..831daf64b90c 100644 --- a/include/linux/vt.h +++ b/include/linux/vt.h @@ -1,17 +1,6 @@ #ifndef _LINUX_VT_H #define _LINUX_VT_H -#ifdef __KERNEL__ -struct notifier_block; - -struct vt_notifier_param { - struct vc_data *vc; /* VC on which the update happened */ - unsigned int c; /* Printed char */ -}; - -extern int register_vt_notifier(struct notifier_block *nb); -extern int unregister_vt_notifier(struct notifier_block *nb); -#endif /* * These constants are also useful for user-level apps (e.g., VC diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h index 5b53efe41b5c..c0c4e1103a73 100644 --- a/include/linux/vt_kern.h +++ b/include/linux/vt_kern.h @@ -13,6 +13,7 @@ #include #include #include +#include /* * Presently, a lot of graphics programs do not restore the contents of @@ -118,4 +119,15 @@ struct vt_spawn_console { extern struct vt_spawn_console vt_spawn_con; extern int vt_move_to_console(unsigned int vt, int alloc); + +/* Interfaces for VC notification of character events (for accessibility etc) */ + +struct vt_notifier_param { + struct vc_data *vc; /* VC on which the update happened */ + unsigned int c; /* Printed char */ +}; + +extern int register_vt_notifier(struct notifier_block *nb); +extern int unregister_vt_notifier(struct notifier_block *nb); + #endif /* _VT_KERN_H */ -- cgit v1.2.3 From d3b5cffcf84a8bdc7073dce4745d67c72629af85 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sat, 19 Sep 2009 13:13:26 -0700 Subject: vt: add an activate and lock X and other graphical interfaces need to be able to flip to a console and lock it into graphics mode without races. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/vt.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/vt.h b/include/linux/vt.h index 831daf64b90c..7afca0d72139 100644 --- a/include/linux/vt.h +++ b/include/linux/vt.h @@ -77,4 +77,11 @@ struct vt_event { #define VT_WAITEVENT 0x560E /* Wait for an event */ +struct vt_setactivate { + unsigned int console; + struct vt_mode mode; +}; + +#define VT_SETACTIVATE 0x560F /* Activate and set the mode of a console */ + #endif /* _LINUX_VT_H */ -- cgit v1.2.3 From a509a7e478e4766114d69f12d19d644ac63e9765 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sat, 19 Sep 2009 13:13:26 -0700 Subject: tty: USB does not need the filp argument in the drivers And indeed none of them use it. Clean this up as it will make moving to a standard open method rather easier. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/serial.h | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 0ec50ba62139..1cbaf4a6b449 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -238,9 +238,8 @@ struct usb_serial_driver { int (*resume)(struct usb_serial *serial); /* serial function calls */ - /* Called by console with tty = NULL and by tty */ - int (*open)(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); + /* Called by console and by the tty layer */ + int (*open)(struct tty_struct *tty, struct usb_serial_port *port); void (*close)(struct usb_serial_port *port); int (*write)(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); @@ -300,7 +299,7 @@ static inline void usb_serial_console_disconnect(struct usb_serial *serial) {} extern struct usb_serial *usb_serial_get_by_index(unsigned int minor); extern void usb_serial_put(struct usb_serial *serial); extern int usb_serial_generic_open(struct tty_struct *tty, - struct usb_serial_port *port, struct file *filp); + struct usb_serial_port *port); extern int usb_serial_generic_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); extern void usb_serial_generic_close(struct usb_serial_port *port); -- cgit v1.2.3 From ebd2c8f6d2ec4012c267ecb95e72a57b8355a705 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sat, 19 Sep 2009 13:13:28 -0700 Subject: serial: kill off uart_info We moved this into uart_state, now move the fields out of the separate structure and kill it off. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_core.h | 64 +++++++++++++++++++++------------------------ 1 file changed, 30 insertions(+), 34 deletions(-) (limited to 'include/linux') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 3cd255f0b211..c1542703fbab 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -186,7 +186,6 @@ #include struct uart_port; -struct uart_info; struct serial_struct; struct device; @@ -284,7 +283,7 @@ struct uart_port { unsigned int read_status_mask; /* driver specific */ unsigned int ignore_status_mask; /* driver specific */ - struct uart_info *info; /* pointer to parent info */ + struct uart_state *state; /* pointer to parent state */ struct uart_icount icount; /* statistics */ struct console *cons; /* struct console, if any */ @@ -343,8 +342,22 @@ struct uart_port { */ typedef unsigned int __bitwise__ uif_t; -struct uart_info { + +/* + * This is the state information which is persistent across opens. + * The low level driver must not to touch any elements contained + * within. + */ +struct uart_state { struct tty_port port; + unsigned int close_delay; /* msec */ + unsigned int closing_wait; /* msec */ + +#define USF_CLOSING_WAIT_INF (0) +#define USF_CLOSING_WAIT_NONE (~0U) + + int count; + int pm_state; struct circ_buf xmit; uif_t flags; @@ -362,24 +375,7 @@ struct uart_info { struct tasklet_struct tlet; wait_queue_head_t delta_msr_wait; -}; - -/* - * This is the state information which is persistent across opens. - * The low level driver must not to touch any elements contained - * within. - */ -struct uart_state { - unsigned int close_delay; /* msec */ - unsigned int closing_wait; /* msec */ - -#define USF_CLOSING_WAIT_INF (0) -#define USF_CLOSING_WAIT_NONE (~0U) - - int count; - int pm_state; - struct uart_info info; - struct uart_port *port; + struct uart_port *uart_port; struct mutex mutex; }; @@ -462,7 +458,7 @@ int uart_resume_port(struct uart_driver *reg, struct uart_port *port); static inline int uart_tx_stopped(struct uart_port *port) { - struct tty_struct *tty = port->info->port.tty; + struct tty_struct *tty = port->state->port.tty; if(tty->stopped || tty->hw_stopped) return 1; return 0; @@ -477,7 +473,7 @@ uart_handle_sysrq_char(struct uart_port *port, unsigned int ch) #ifdef SUPPORT_SYSRQ if (port->sysrq) { if (ch && time_before(jiffies, port->sysrq)) { - handle_sysrq(ch, port->info->port.tty); + handle_sysrq(ch, port->state->port.tty); port->sysrq = 0; return 1; } @@ -495,7 +491,7 @@ uart_handle_sysrq_char(struct uart_port *port, unsigned int ch) */ static inline int uart_handle_break(struct uart_port *port) { - struct uart_info *info = port->info; + struct uart_state *state = port->state; #ifdef SUPPORT_SYSRQ if (port->cons && port->cons->index == port->line) { if (!port->sysrq) { @@ -506,7 +502,7 @@ static inline int uart_handle_break(struct uart_port *port) } #endif if (port->flags & UPF_SAK) - do_SAK(info->port.tty); + do_SAK(state->port.tty); return 0; } @@ -518,7 +514,7 @@ static inline int uart_handle_break(struct uart_port *port) static inline void uart_handle_dcd_change(struct uart_port *port, unsigned int status) { - struct uart_info *info = port->info; + struct uart_state *state = port->state; port->icount.dcd++; @@ -527,11 +523,11 @@ uart_handle_dcd_change(struct uart_port *port, unsigned int status) hardpps(); #endif - if (info->flags & UIF_CHECK_CD) { + if (state->flags & UIF_CHECK_CD) { if (status) - wake_up_interruptible(&info->port.open_wait); - else if (info->port.tty) - tty_hangup(info->port.tty); + wake_up_interruptible(&state->port.open_wait); + else if (state->port.tty) + tty_hangup(state->port.tty); } } @@ -543,12 +539,12 @@ uart_handle_dcd_change(struct uart_port *port, unsigned int status) static inline void uart_handle_cts_change(struct uart_port *port, unsigned int status) { - struct uart_info *info = port->info; - struct tty_struct *tty = info->port.tty; + struct uart_state *state = port->state; + struct tty_struct *tty = state->port.tty; port->icount.cts++; - if (info->flags & UIF_CTS_FLOW) { + if (state->flags & UIF_CTS_FLOW) { if (tty->hw_stopped) { if (status) { tty->hw_stopped = 0; @@ -570,7 +566,7 @@ static inline void uart_insert_char(struct uart_port *port, unsigned int status, unsigned int overrun, unsigned int ch, unsigned int flag) { - struct tty_struct *tty = port->info->port.tty; + struct tty_struct *tty = port->state->port.tty; if ((status & port->ignore_status_mask & ~overrun) == 0) tty_insert_flip_char(tty, ch, flag); -- cgit v1.2.3 From 5e99df561fc830730d63672d795a0b02ef8cdd6f Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sat, 19 Sep 2009 13:13:28 -0700 Subject: serial: Fold closing_* fields into the tty_port ones Remove some more serial specific use Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_core.h | 2 -- include/linux/tty.h | 4 ++-- 2 files changed, 2 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index c1542703fbab..fd11d4d5a571 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -350,8 +350,6 @@ typedef unsigned int __bitwise__ uif_t; */ struct uart_state { struct tty_port port; - unsigned int close_delay; /* msec */ - unsigned int closing_wait; /* msec */ #define USF_CLOSING_WAIT_INF (0) #define USF_CLOSING_WAIT_NONE (~0U) diff --git a/include/linux/tty.h b/include/linux/tty.h index ecb3d1ba3017..9fdc3d84baad 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -206,8 +206,8 @@ struct tty_port { unsigned long flags; /* TTY flags ASY_*/ struct mutex mutex; /* Locking */ unsigned char *xmit_buf; /* Optional buffer */ - int close_delay; /* Close port delay */ - int closing_wait; /* Delay for output */ + unsigned int close_delay; /* Close port delay */ + unsigned int closing_wait; /* Delay for output */ int drain_delay; /* Set to zero if no pure time based drain is needed else set to size of fifo */ -- cgit v1.2.3 From 91312cdb4fcd832341e425f74f49938e0503c929 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sat, 19 Sep 2009 13:13:29 -0700 Subject: serial: move count into the tty_port version Remove more stuff from the serial special case code Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_core.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index fd11d4d5a571..63ad90966db2 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -354,7 +354,6 @@ struct uart_state { #define USF_CLOSING_WAIT_INF (0) #define USF_CLOSING_WAIT_NONE (~0U) - int count; int pm_state; struct circ_buf xmit; uif_t flags; -- cgit v1.2.3 From ccce6debb62d94964e3878f978a56b0f3e32d94f Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sat, 19 Sep 2009 13:13:30 -0700 Subject: serial: move the flags into the tty_port field Fortunately the serial layer was designed to use the same flag values but with different names. It has its own SUSPENDED flag which is a free slot in the ASYNC flags so we allocate it in the ASYNC flags instead. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/serial.h | 2 ++ include/linux/serial_core.h | 48 ++++++++++++++++++--------------------------- 2 files changed, 21 insertions(+), 29 deletions(-) (limited to 'include/linux') diff --git a/include/linux/serial.h b/include/linux/serial.h index e5bb75a63802..c8613c3ff9d3 100644 --- a/include/linux/serial.h +++ b/include/linux/serial.h @@ -122,6 +122,7 @@ struct serial_uart_config { /* Internal flags used only by kernel */ #define ASYNCB_INITIALIZED 31 /* Serial port was initialized */ +#define ASYNCB_SUSPENDED 30 /* Serial port is suspended */ #define ASYNCB_NORMAL_ACTIVE 29 /* Normal device is active */ #define ASYNCB_BOOT_AUTOCONF 28 /* Autoconfigure port on bootup */ #define ASYNCB_CLOSING 27 /* Serial port is closing */ @@ -133,6 +134,7 @@ struct serial_uart_config { #define ASYNCB_FIRST_KERNEL 22 #define ASYNC_HUP_NOTIFY (1U << ASYNCB_HUP_NOTIFY) +#define ASYNC_SUSPENDED (1U << ASYNCB_SUSPENDED) #define ASYNC_FOURPORT (1U << ASYNCB_FOURPORT) #define ASYNC_SAK (1U << ASYNCB_SAK) #define ASYNC_SPLIT_TERMIOS (1U << ASYNCB_SPLIT_TERMIOS) diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 63ad90966db2..284ef7f54890 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -20,6 +20,8 @@ #ifndef LINUX_SERIAL_CORE_H #define LINUX_SERIAL_CORE_H +#include + /* * The type definitions. These are from Ted Ts'o's serial.h */ @@ -356,19 +358,6 @@ struct uart_state { int pm_state; struct circ_buf xmit; - uif_t flags; - -/* - * Definitions for info->flags. These are _private_ to serial_core, and - * are specific to this structure. They may be queried by low level drivers. - * - * FIXME: use the ASY_ definitions - */ -#define UIF_CHECK_CD ((__force uif_t) (1 << 25)) -#define UIF_CTS_FLOW ((__force uif_t) (1 << 26)) -#define UIF_NORMAL_ACTIVE ((__force uif_t) (1 << 29)) -#define UIF_INITIALIZED ((__force uif_t) (1 << 31)) -#define UIF_SUSPENDED ((__force uif_t) (1 << 30)) struct tasklet_struct tlet; wait_queue_head_t delta_msr_wait; @@ -509,22 +498,23 @@ static inline int uart_handle_break(struct uart_port *port) * @status: new carrier detect status, nonzero if active */ static inline void -uart_handle_dcd_change(struct uart_port *port, unsigned int status) +uart_handle_dcd_change(struct uart_port *uport, unsigned int status) { - struct uart_state *state = port->state; + struct uart_state *state = uport->state; + struct tty_port *port = &state->port; - port->icount.dcd++; + uport->icount.dcd++; #ifdef CONFIG_HARD_PPS - if ((port->flags & UPF_HARDPPS_CD) && status) + if ((uport->flags & UPF_HARDPPS_CD) && status) hardpps(); #endif - if (state->flags & UIF_CHECK_CD) { + if (port->flags & ASYNC_CHECK_CD) { if (status) - wake_up_interruptible(&state->port.open_wait); - else if (state->port.tty) - tty_hangup(state->port.tty); + wake_up_interruptible(&port->open_wait); + else if (port->tty) + tty_hangup(port->tty); } } @@ -534,24 +524,24 @@ uart_handle_dcd_change(struct uart_port *port, unsigned int status) * @status: new clear to send status, nonzero if active */ static inline void -uart_handle_cts_change(struct uart_port *port, unsigned int status) +uart_handle_cts_change(struct uart_port *uport, unsigned int status) { - struct uart_state *state = port->state; - struct tty_struct *tty = state->port.tty; + struct tty_port *port = &uport->state->port; + struct tty_struct *tty = port->tty; - port->icount.cts++; + uport->icount.cts++; - if (state->flags & UIF_CTS_FLOW) { + if (port->flags & ASYNC_CTS_FLOW) { if (tty->hw_stopped) { if (status) { tty->hw_stopped = 0; - port->ops->start_tx(port); - uart_write_wakeup(port); + uport->ops->start_tx(uport); + uart_write_wakeup(uport); } } else { if (!status) { tty->hw_stopped = 1; - port->ops->stop_tx(port); + uport->ops->stop_tx(uport); } } } -- cgit v1.2.3 From a03006860d272eac5a8ebf23f04f54c7e1e783a5 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sat, 19 Sep 2009 13:13:30 -0700 Subject: serial: kill off uif_t This typedef is now extinct Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_core.h | 11 ----------- 1 file changed, 11 deletions(-) (limited to 'include/linux') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 284ef7f54890..f98dc78abb27 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -336,19 +336,8 @@ struct uart_port { void *private_data; /* generic platform data pointer */ }; -/* - * This is the state information which is only valid when the port - * is open; it may be cleared the core driver once the device has - * been closed. Either the low level driver or the core can modify - * stuff here. - */ -typedef unsigned int __bitwise__ uif_t; - - /* * This is the state information which is persistent across opens. - * The low level driver must not to touch any elements contained - * within. */ struct uart_state { struct tty_port port; -- cgit v1.2.3 From a2bceae065ed8c4f552b35c4dde4cc2db05ce9e3 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sat, 19 Sep 2009 13:13:31 -0700 Subject: serial: replace the state mutex with the tty port mutex They cover essentially the same stuff and we can therefore fold it into the tty_port one. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_core.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index f98dc78abb27..27767ea5fa29 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -351,8 +351,6 @@ struct uart_state { struct tasklet_struct tlet; wait_queue_head_t delta_msr_wait; struct uart_port *uart_port; - - struct mutex mutex; }; #define UART_XMIT_SIZE PAGE_SIZE -- cgit v1.2.3 From bdc04e3174e18f475289fa8f4144f66686326b7e Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sat, 19 Sep 2009 13:13:31 -0700 Subject: serial: move delta_msr_wait into the tty_port This is used by various drivers not just serial and can be extracted as commonality Signed-off-by: Alan Cox --- include/linux/cyclades.h | 1 - include/linux/hayesesp.h | 1 - include/linux/serial_core.h | 1 - include/linux/tty.h | 1 + 4 files changed, 1 insertion(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h index bbebef7713b3..a5049eaf782d 100644 --- a/include/linux/cyclades.h +++ b/include/linux/cyclades.h @@ -578,7 +578,6 @@ struct cyclades_port { struct cyclades_idle_stats idle_stats; struct cyclades_icount icount; struct completion shutdown_wait; - wait_queue_head_t delta_msr_wait; int throttle; }; diff --git a/include/linux/hayesesp.h b/include/linux/hayesesp.h index 940aeb51d53f..92b08cfe4a75 100644 --- a/include/linux/hayesesp.h +++ b/include/linux/hayesesp.h @@ -96,7 +96,6 @@ struct esp_struct { int xmit_head; int xmit_tail; int xmit_cnt; - wait_queue_head_t delta_msr_wait; wait_queue_head_t break_wait; struct async_icount icount; /* kernel counters for the 4 input interrupts */ struct hayes_esp_config config; /* port configuration */ diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 27767ea5fa29..bcafecd3b7c1 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -349,7 +349,6 @@ struct uart_state { struct circ_buf xmit; struct tasklet_struct tlet; - wait_queue_head_t delta_msr_wait; struct uart_port *uart_port; }; diff --git a/include/linux/tty.h b/include/linux/tty.h index 9fdc3d84baad..0daa8a72b176 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -203,6 +203,7 @@ struct tty_port { int count; /* Usage count */ wait_queue_head_t open_wait; /* Open waiters */ wait_queue_head_t close_wait; /* Close waiters */ + wait_queue_head_t delta_msr_wait; /* Modem status change */ unsigned long flags; /* TTY flags ASY_*/ struct mutex mutex; /* Locking */ unsigned char *xmit_buf; /* Optional buffer */ -- cgit v1.2.3 From b58d13a0216d4e0753668214f23e1d2c24c30f8c Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sat, 19 Sep 2009 13:13:32 -0700 Subject: serial: move port users helper This little helper is now tty_port specific and useful generally so move it Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/tty.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/tty.h b/include/linux/tty.h index 0daa8a72b176..a0e03309a379 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -467,6 +467,11 @@ extern int tty_port_close_start(struct tty_port *port, extern void tty_port_close_end(struct tty_port *port, struct tty_struct *tty); extern void tty_port_close(struct tty_port *port, struct tty_struct *tty, struct file *filp); +extern inline int tty_port_users(struct tty_port *port) +{ + return port->count + port->blocked_open; +} + extern int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc); extern int tty_unregister_ldisc(int disc); extern int tty_set_ldisc(struct tty_struct *tty, int ldisc); -- cgit v1.2.3 From 016af53a6de6837e5be3da68901083ea85ebb4da Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sat, 19 Sep 2009 13:13:32 -0700 Subject: serial: kill USF_CLOSING_* definitions The serial layer for some reason uses different defines for the special case close delays and then conditionally switches to/from the normal ones in the ioctls. Remove this rather pointless abstraction Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_core.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index bcafecd3b7c1..d58e460844dd 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -342,9 +342,6 @@ struct uart_port { struct uart_state { struct tty_port port; -#define USF_CLOSING_WAIT_INF (0) -#define USF_CLOSING_WAIT_NONE (~0U) - int pm_state; struct circ_buf xmit; -- cgit v1.2.3 From fe1ae7fdd2ee603f2d95f04e09a68f7f79045127 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sat, 19 Sep 2009 13:13:33 -0700 Subject: tty: USB serial termios bits Various drivers have hacks to mangle termios structures. This stems from the fact there is no nice setup hook for configuring the termios settings when the port is created Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/serial.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 1cbaf4a6b449..7b85e327af91 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -260,6 +260,9 @@ struct usb_serial_driver { be an attached tty at this point */ void (*dtr_rts)(struct usb_serial_port *port, int on); int (*carrier_raised)(struct usb_serial_port *port); + /* Called by the usb serial hooks to allow the user to rework the + termios state */ + void (*init_termios)(struct tty_struct *tty); /* USB events */ void (*read_int_callback)(struct urb *urb); void (*write_int_callback)(struct urb *urb); -- cgit v1.2.3 From e92166517e3ca9bfb416f91e69cf0373b55b6ede Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 6 Aug 2009 15:09:28 +0200 Subject: tty: handle VT specific compat ioctls in vt driver The VT specific compat_ioctl handlers are the only ones in common code that require the BKL. Moving them into the vt driver lets us remove the BKL from the other handlers and cleans up the code. Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- include/linux/tty.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/tty.h b/include/linux/tty.h index a0e03309a379..f0f43d08d8b8 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -536,5 +536,8 @@ extern int pcxe_open(struct tty_struct *tty, struct file *filp); extern int vt_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); +extern long vt_compat_ioctl(struct tty_struct *tty, struct file * file, + unsigned int cmd, unsigned long arg); + #endif /* __KERNEL__ */ #endif -- cgit v1.2.3 From be2f092bfc4f6a415bb4c3e2dcbf521a1f2a0fe5 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Sat, 5 Sep 2009 01:20:43 +0900 Subject: mtd: nand: add __nand_correct_data helper function Split nand_correct_data() into two part, a pure calculation function and a wrapper for mtd interface. The tmio_nand driver can implement its ecc.correct function easily using this __nand_correct_data helper. Signed-off-by: Atsushi Nemoto Acked-by: Dmitry Eremin-Solenikov Acked-by: Vimal Singh Signed-off-by: David Woodhouse --- include/linux/mtd/nand_ecc.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mtd/nand_ecc.h b/include/linux/mtd/nand_ecc.h index 090da505425d..052ea8ca2434 100644 --- a/include/linux/mtd/nand_ecc.h +++ b/include/linux/mtd/nand_ecc.h @@ -20,6 +20,12 @@ struct mtd_info; */ int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code); +/* + * Detect and correct a 1 bit error for eccsize byte block + */ +int __nand_correct_data(u_char *dat, u_char *read_ecc, u_char *calc_ecc, + unsigned int eccsize); + /* * Detect and correct a 1 bit error for 256 byte block */ -- cgit v1.2.3 From 43cc960980760f58d1f49ecd39e8cbfb063d63e1 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Sun, 20 Sep 2009 16:09:20 +0530 Subject: includecheck fix: include/linux, aio.h fix the following 'make includecheck' warning: include/linux/aio.h: linux/aio_abi.h is included more than once. Signed-off-by: Jaswinder Singh Rajput Cc: bcrl@kvack.org Cc: Sam Ravnborg LKML-Reference: <1247068254.4382.101.camel@ht.satnam> --- include/linux/aio.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/aio.h b/include/linux/aio.h index 47f7d932a01d..aea219d7d8d1 100644 --- a/include/linux/aio.h +++ b/include/linux/aio.h @@ -225,8 +225,6 @@ static inline void exit_aio(struct mm_struct *mm) { } #define io_wait_to_kiocb(wait) container_of(wait, struct kiocb, ki_wait) -#include - static inline struct kiocb *list_kiocb(struct list_head *h) { return list_entry(h, struct kiocb, ki_list); -- cgit v1.2.3 From 97572751d78133cf9a5f7165b252bf975f9dd17d Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Sun, 20 Sep 2009 16:20:44 +0530 Subject: includecheck fix: include/linux, page_cgroup.h fix the following 'make includecheck' warning: include/linux/page_cgroup.h: linux/swap.h is included more than once. Signed-off-by: Jaswinder Singh Rajput Cc: Li Zefan Acked-by: Paul Menage --- include/linux/page_cgroup.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/page_cgroup.h b/include/linux/page_cgroup.h index 13f126c89ae8..ada779f24178 100644 --- a/include/linux/page_cgroup.h +++ b/include/linux/page_cgroup.h @@ -105,14 +105,14 @@ static inline void __init page_cgroup_init_flatmem(void) #endif -#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP #include + +#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP extern unsigned short swap_cgroup_record(swp_entry_t ent, unsigned short id); extern unsigned short lookup_swap_cgroup(swp_entry_t ent); extern int swap_cgroup_swapon(int type, unsigned long max_pages); extern void swap_cgroup_swapoff(int type); #else -#include static inline unsigned short swap_cgroup_record(swp_entry_t ent, unsigned short id) -- cgit v1.2.3 From 83ba7c34d2b82dc608647f629616df393ab883f9 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Sun, 20 Sep 2009 16:24:00 +0530 Subject: includecheck fix: include/linux, ftrace.h fix the following 'make includecheck' warning: include/linux/ftrace.h: linux/sched.h is included more than once. Signed-off-by: Jaswinder Singh Rajput Cc: Steven Rostedt Cc: Ingo Molnar Cc: Sam Ravnborg LKML-Reference: <1247068321.4382.102.camel@ht.satnam> --- include/linux/ftrace.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index dc3b1328aaeb..3c0924a18daf 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -446,7 +446,6 @@ static inline void unpause_graph_tracing(void) { } #endif /* CONFIG_FUNCTION_GRAPH_TRACER */ #ifdef CONFIG_TRACING -#include /* flags for current->trace */ enum { -- cgit v1.2.3 From 89f19f04dc72363d912fd007a399cb10310eff6e Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sat, 19 Sep 2009 11:55:44 -0700 Subject: sched: Fix raciness in runqueue_is_locked() runqueue_is_locked() is unavoidably racy due to a poor interface design. It does cpu = get_cpu() ret = some_perpcu_thing(cpu); put_cpu(cpu); return ret; Its return value is unreliable. Fix. Signed-off-by: Andrew Morton Acked-by: Steven Rostedt Cc: Peter Zijlstra LKML-Reference: <200909191855.n8JItiko022148@imap1.linux-foundation.org> Signed-off-by: Ingo Molnar --- include/linux/sched.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 8af3d249170e..cc37a3fa5065 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -257,7 +257,7 @@ extern asmlinkage void schedule_tail(struct task_struct *prev); extern void init_idle(struct task_struct *idle, int cpu); extern void init_idle_bootup_task(struct task_struct *idle); -extern int runqueue_is_locked(void); +extern int runqueue_is_locked(int cpu); extern void task_rq_unlock_wait(struct task_struct *p); extern cpumask_var_t nohz_cpu_mask; -- cgit v1.2.3 From 42f29a25207dc7b3051d299cc028d4b395d1328d Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sun, 20 Sep 2009 18:14:12 -0400 Subject: kbuild: Don't define ALIGN and ENTRY when preprocessing linker scripts. Adding a reference to to x86's causes the x86 linker script to have syntax errors, because the ALIGN and ENTRY keywords get redefined to the assembly implementations of those. One could fix this by adjusting the include structure, but I think any solution based on that approach would be fragile. Currently, it is impossible when writing a header to do something different for assembly files and linker scripts, even though there are clearly cases where one wants them to define macros differently for the two (ENTRY being an excellent example). So I think the right solution here is to introduce a new preprocessor definition, called LINKER_SCRIPT that is set along with __ASSEMBLY__ for linker scripts, and to use that to not define ALIGN and ENTRY in linker scripts. I suspect we'll find other uses for this mechanism in the future. Signed-off-by: Tim Abbott Signed-off-by: Sam Ravnborg --- include/linux/linkage.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/linkage.h b/include/linux/linkage.h index 691f59171c6c..5126cceb6ae9 100644 --- a/include/linux/linkage.h +++ b/include/linux/linkage.h @@ -57,6 +57,7 @@ #ifdef __ASSEMBLY__ +#ifndef LINKER_SCRIPT #define ALIGN __ALIGN #define ALIGN_STR __ALIGN_STR @@ -66,6 +67,7 @@ ALIGN; \ name: #endif +#endif /* LINKER_SCRIPT */ #ifndef WEAK #define WEAK(name) \ -- cgit v1.2.3 From cd74c86bdf705f824d494a2bbda393d1d562b40a Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 21 Sep 2009 16:44:32 +1000 Subject: perf_counter, powerpc, sparc: Fix compilation after perf_counter_overflow() change Commit 5622f295 ("x86, perf_counter, bts: Optimize BTS overflow handling") removed the regs field from struct perf_sample_data and added a regs parameter to perf_counter_overflow(). This breaks the build on powerpc (and Sparc) as reported by Sachin Sant: arch/powerpc/kernel/perf_counter.c: In function 'record_and_restart': arch/powerpc/kernel/perf_counter.c:1165: error: unknown field 'regs' specified in initializer This adjusts arch/powerpc/kernel/perf_counter.c to correspond with the new struct perf_sample_data and perf_counter_overflow(). [ v2: also fix Sparc, Markus Metzger ] Reported-by: Sachin Sant Signed-off-by: Paul Mackerras Cc: Markus Metzger Cc: David S. Miller Cc: benh@kernel.crashing.org Cc: linuxppc-dev@ozlabs.org Cc: Peter Zijlstra LKML-Reference: <19127.8400.376239.586120@drongo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar --- include/linux/perf_counter.h | 17 ----------------- 1 file changed, 17 deletions(-) (limited to 'include/linux') diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h index bd341007c4fc..740caad09a44 100644 --- a/include/linux/perf_counter.h +++ b/include/linux/perf_counter.h @@ -849,23 +849,6 @@ static inline void perf_counter_comm(struct task_struct *tsk) { } static inline void perf_counter_fork(struct task_struct *tsk) { } static inline void perf_counter_init(void) { } -static inline int -perf_output_begin(struct perf_output_handle *handle, struct perf_counter *c, - unsigned int size, int nmi, int sample) { } -static inline void perf_output_end(struct perf_output_handle *handle) { } -static inline void -perf_output_copy(struct perf_output_handle *handle, - const void *buf, unsigned int len) { } -static inline void -perf_output_sample(struct perf_output_handle *handle, - struct perf_event_header *header, - struct perf_sample_data *data, - struct perf_counter *counter) { } -static inline void -perf_prepare_sample(struct perf_event_header *header, - struct perf_sample_data *data, - struct perf_counter *counter, - struct pt_regs *regs) { } #endif #define perf_output_put(handle, x) \ -- cgit v1.2.3 From 0d721ceadbeaa24d7f9dd41b3e5e29912327a7e1 Mon Sep 17 00:00:00 2001 From: Peter Williams Date: Mon, 21 Sep 2009 01:31:53 +0000 Subject: sched: Simplify sys_sched_rr_get_interval() system call By removing the need for it to know details of scheduling classes. This allows PlugSched to define orthogonal scheduling classes. Signed-off-by: Peter Williams Acked-by: Peter Zijlstra Cc: Mike Galbraith LKML-Reference: <06d1b89ee15a0eef82d7.1253496713@mudlark.pw.nest> Signed-off-by: Ingo Molnar --- include/linux/sched.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index cc37a3fa5065..239c8e0dba9f 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1075,6 +1075,8 @@ struct sched_class { void (*prio_changed) (struct rq *this_rq, struct task_struct *task, int oldprio, int running); + unsigned int (*get_rr_interval) (struct task_struct *task); + #ifdef CONFIG_FAIR_GROUP_SCHED void (*moved_group) (struct task_struct *p); #endif -- cgit v1.2.3 From 65abc8653c282ded3dbdb9ec1227784140ba28cd Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 21 Sep 2009 10:18:27 +0200 Subject: perf_counter: Rename list_entry -> group_entry, counter_list -> group_list This is in preparation of the big rename, but also makes sense in a standalone way: 'list_entry' is a bad name as we already have a list_entry() in list.h. Also, the 'counter list' is too vague, it doesnt tell us the purpose of that list. Clarify these names to show that it's all about the group hiearchy. Acked-by: Peter Zijlstra Cc: Paul Mackerras Cc: Frederic Weisbecker LKML-Reference: Signed-off-by: Ingo Molnar --- include/linux/perf_counter.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h index 740caad09a44..f64862732673 100644 --- a/include/linux/perf_counter.h +++ b/include/linux/perf_counter.h @@ -543,7 +543,7 @@ struct perf_pending_entry { */ struct perf_counter { #ifdef CONFIG_PERF_COUNTERS - struct list_head list_entry; + struct list_head group_entry; struct list_head event_entry; struct list_head sibling_list; int nr_siblings; @@ -649,7 +649,7 @@ struct perf_counter_context { */ struct mutex mutex; - struct list_head counter_list; + struct list_head group_list; struct list_head event_list; int nr_counters; int nr_active; -- cgit v1.2.3 From cdd6c482c9ff9c55475ee7392ec8f672eddb7be6 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 21 Sep 2009 12:02:48 +0200 Subject: perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian Acked-by: Peter Zijlstra Acked-by: Paul Mackerras Reviewed-by: Arjan van de Ven Cc: Mike Galbraith Cc: Arnaldo Carvalho de Melo Cc: Frederic Weisbecker Cc: Steven Rostedt Cc: Benjamin Herrenschmidt Cc: David Howells Cc: Kyle McMartin Cc: Martin Schwidefsky Cc: "David S. Miller" Cc: Thomas Gleixner Cc: "H. Peter Anvin" Cc: LKML-Reference: Signed-off-by: Ingo Molnar --- include/linux/init_task.h | 14 +- include/linux/perf_counter.h | 858 ------------------------------------------- include/linux/perf_event.h | 858 +++++++++++++++++++++++++++++++++++++++++++ include/linux/prctl.h | 4 +- include/linux/sched.h | 12 +- include/linux/syscalls.h | 6 +- 6 files changed, 876 insertions(+), 876 deletions(-) delete mode 100644 include/linux/perf_counter.h create mode 100644 include/linux/perf_event.h (limited to 'include/linux') diff --git a/include/linux/init_task.h b/include/linux/init_task.h index 9e7f2e8fc66e..21a6f5d9af22 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -106,13 +106,13 @@ extern struct group_info init_groups; extern struct cred init_cred; -#ifdef CONFIG_PERF_COUNTERS -# define INIT_PERF_COUNTERS(tsk) \ - .perf_counter_mutex = \ - __MUTEX_INITIALIZER(tsk.perf_counter_mutex), \ - .perf_counter_list = LIST_HEAD_INIT(tsk.perf_counter_list), +#ifdef CONFIG_PERF_EVENTS +# define INIT_PERF_EVENTS(tsk) \ + .perf_event_mutex = \ + __MUTEX_INITIALIZER(tsk.perf_event_mutex), \ + .perf_event_list = LIST_HEAD_INIT(tsk.perf_event_list), #else -# define INIT_PERF_COUNTERS(tsk) +# define INIT_PERF_EVENTS(tsk) #endif /* @@ -178,7 +178,7 @@ extern struct cred init_cred; }, \ .dirties = INIT_PROP_LOCAL_SINGLE(dirties), \ INIT_IDS \ - INIT_PERF_COUNTERS(tsk) \ + INIT_PERF_EVENTS(tsk) \ INIT_TRACE_IRQFLAGS \ INIT_LOCKDEP \ INIT_FTRACE_GRAPH \ diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h deleted file mode 100644 index f64862732673..000000000000 --- a/include/linux/perf_counter.h +++ /dev/null @@ -1,858 +0,0 @@ -/* - * Performance counters: - * - * Copyright (C) 2008-2009, Thomas Gleixner - * Copyright (C) 2008-2009, Red Hat, Inc., Ingo Molnar - * Copyright (C) 2008-2009, Red Hat, Inc., Peter Zijlstra - * - * Data type definitions, declarations, prototypes. - * - * Started by: Thomas Gleixner and Ingo Molnar - * - * For licencing details see kernel-base/COPYING - */ -#ifndef _LINUX_PERF_COUNTER_H -#define _LINUX_PERF_COUNTER_H - -#include -#include -#include - -/* - * User-space ABI bits: - */ - -/* - * attr.type - */ -enum perf_type_id { - PERF_TYPE_HARDWARE = 0, - PERF_TYPE_SOFTWARE = 1, - PERF_TYPE_TRACEPOINT = 2, - PERF_TYPE_HW_CACHE = 3, - PERF_TYPE_RAW = 4, - - PERF_TYPE_MAX, /* non-ABI */ -}; - -/* - * Generalized performance counter event types, used by the - * attr.event_id parameter of the sys_perf_counter_open() - * syscall: - */ -enum perf_hw_id { - /* - * Common hardware events, generalized by the kernel: - */ - PERF_COUNT_HW_CPU_CYCLES = 0, - PERF_COUNT_HW_INSTRUCTIONS = 1, - PERF_COUNT_HW_CACHE_REFERENCES = 2, - PERF_COUNT_HW_CACHE_MISSES = 3, - PERF_COUNT_HW_BRANCH_INSTRUCTIONS = 4, - PERF_COUNT_HW_BRANCH_MISSES = 5, - PERF_COUNT_HW_BUS_CYCLES = 6, - - PERF_COUNT_HW_MAX, /* non-ABI */ -}; - -/* - * Generalized hardware cache counters: - * - * { L1-D, L1-I, LLC, ITLB, DTLB, BPU } x - * { read, write, prefetch } x - * { accesses, misses } - */ -enum perf_hw_cache_id { - PERF_COUNT_HW_CACHE_L1D = 0, - PERF_COUNT_HW_CACHE_L1I = 1, - PERF_COUNT_HW_CACHE_LL = 2, - PERF_COUNT_HW_CACHE_DTLB = 3, - PERF_COUNT_HW_CACHE_ITLB = 4, - PERF_COUNT_HW_CACHE_BPU = 5, - - PERF_COUNT_HW_CACHE_MAX, /* non-ABI */ -}; - -enum perf_hw_cache_op_id { - PERF_COUNT_HW_CACHE_OP_READ = 0, - PERF_COUNT_HW_CACHE_OP_WRITE = 1, - PERF_COUNT_HW_CACHE_OP_PREFETCH = 2, - - PERF_COUNT_HW_CACHE_OP_MAX, /* non-ABI */ -}; - -enum perf_hw_cache_op_result_id { - PERF_COUNT_HW_CACHE_RESULT_ACCESS = 0, - PERF_COUNT_HW_CACHE_RESULT_MISS = 1, - - PERF_COUNT_HW_CACHE_RESULT_MAX, /* non-ABI */ -}; - -/* - * Special "software" counters provided by the kernel, even if the hardware - * does not support performance counters. These counters measure various - * physical and sw events of the kernel (and allow the profiling of them as - * well): - */ -enum perf_sw_ids { - PERF_COUNT_SW_CPU_CLOCK = 0, - PERF_COUNT_SW_TASK_CLOCK = 1, - PERF_COUNT_SW_PAGE_FAULTS = 2, - PERF_COUNT_SW_CONTEXT_SWITCHES = 3, - PERF_COUNT_SW_CPU_MIGRATIONS = 4, - PERF_COUNT_SW_PAGE_FAULTS_MIN = 5, - PERF_COUNT_SW_PAGE_FAULTS_MAJ = 6, - - PERF_COUNT_SW_MAX, /* non-ABI */ -}; - -/* - * Bits that can be set in attr.sample_type to request information - * in the overflow packets. - */ -enum perf_counter_sample_format { - PERF_SAMPLE_IP = 1U << 0, - PERF_SAMPLE_TID = 1U << 1, - PERF_SAMPLE_TIME = 1U << 2, - PERF_SAMPLE_ADDR = 1U << 3, - PERF_SAMPLE_READ = 1U << 4, - PERF_SAMPLE_CALLCHAIN = 1U << 5, - PERF_SAMPLE_ID = 1U << 6, - PERF_SAMPLE_CPU = 1U << 7, - PERF_SAMPLE_PERIOD = 1U << 8, - PERF_SAMPLE_STREAM_ID = 1U << 9, - PERF_SAMPLE_RAW = 1U << 10, - - PERF_SAMPLE_MAX = 1U << 11, /* non-ABI */ -}; - -/* - * The format of the data returned by read() on a perf counter fd, - * as specified by attr.read_format: - * - * struct read_format { - * { u64 value; - * { u64 time_enabled; } && PERF_FORMAT_ENABLED - * { u64 time_running; } && PERF_FORMAT_RUNNING - * { u64 id; } && PERF_FORMAT_ID - * } && !PERF_FORMAT_GROUP - * - * { u64 nr; - * { u64 time_enabled; } && PERF_FORMAT_ENABLED - * { u64 time_running; } && PERF_FORMAT_RUNNING - * { u64 value; - * { u64 id; } && PERF_FORMAT_ID - * } cntr[nr]; - * } && PERF_FORMAT_GROUP - * }; - */ -enum perf_counter_read_format { - PERF_FORMAT_TOTAL_TIME_ENABLED = 1U << 0, - PERF_FORMAT_TOTAL_TIME_RUNNING = 1U << 1, - PERF_FORMAT_ID = 1U << 2, - PERF_FORMAT_GROUP = 1U << 3, - - PERF_FORMAT_MAX = 1U << 4, /* non-ABI */ -}; - -#define PERF_ATTR_SIZE_VER0 64 /* sizeof first published struct */ - -/* - * Hardware event to monitor via a performance monitoring counter: - */ -struct perf_counter_attr { - - /* - * Major type: hardware/software/tracepoint/etc. - */ - __u32 type; - - /* - * Size of the attr structure, for fwd/bwd compat. - */ - __u32 size; - - /* - * Type specific configuration information. - */ - __u64 config; - - union { - __u64 sample_period; - __u64 sample_freq; - }; - - __u64 sample_type; - __u64 read_format; - - __u64 disabled : 1, /* off by default */ - inherit : 1, /* children inherit it */ - pinned : 1, /* must always be on PMU */ - exclusive : 1, /* only group on PMU */ - exclude_user : 1, /* don't count user */ - exclude_kernel : 1, /* ditto kernel */ - exclude_hv : 1, /* ditto hypervisor */ - exclude_idle : 1, /* don't count when idle */ - mmap : 1, /* include mmap data */ - comm : 1, /* include comm data */ - freq : 1, /* use freq, not period */ - inherit_stat : 1, /* per task counts */ - enable_on_exec : 1, /* next exec enables */ - task : 1, /* trace fork/exit */ - watermark : 1, /* wakeup_watermark */ - - __reserved_1 : 49; - - union { - __u32 wakeup_events; /* wakeup every n events */ - __u32 wakeup_watermark; /* bytes before wakeup */ - }; - __u32 __reserved_2; - - __u64 __reserved_3; -}; - -/* - * Ioctls that can be done on a perf counter fd: - */ -#define PERF_COUNTER_IOC_ENABLE _IO ('$', 0) -#define PERF_COUNTER_IOC_DISABLE _IO ('$', 1) -#define PERF_COUNTER_IOC_REFRESH _IO ('$', 2) -#define PERF_COUNTER_IOC_RESET _IO ('$', 3) -#define PERF_COUNTER_IOC_PERIOD _IOW('$', 4, u64) -#define PERF_COUNTER_IOC_SET_OUTPUT _IO ('$', 5) - -enum perf_counter_ioc_flags { - PERF_IOC_FLAG_GROUP = 1U << 0, -}; - -/* - * Structure of the page that can be mapped via mmap - */ -struct perf_counter_mmap_page { - __u32 version; /* version number of this structure */ - __u32 compat_version; /* lowest version this is compat with */ - - /* - * Bits needed to read the hw counters in user-space. - * - * u32 seq; - * s64 count; - * - * do { - * seq = pc->lock; - * - * barrier() - * if (pc->index) { - * count = pmc_read(pc->index - 1); - * count += pc->offset; - * } else - * goto regular_read; - * - * barrier(); - * } while (pc->lock != seq); - * - * NOTE: for obvious reason this only works on self-monitoring - * processes. - */ - __u32 lock; /* seqlock for synchronization */ - __u32 index; /* hardware counter identifier */ - __s64 offset; /* add to hardware counter value */ - __u64 time_enabled; /* time counter active */ - __u64 time_running; /* time counter on cpu */ - - /* - * Hole for extension of the self monitor capabilities - */ - - __u64 __reserved[123]; /* align to 1k */ - - /* - * Control data for the mmap() data buffer. - * - * User-space reading the @data_head value should issue an rmb(), on - * SMP capable platforms, after reading this value -- see - * perf_counter_wakeup(). - * - * When the mapping is PROT_WRITE the @data_tail value should be - * written by userspace to reflect the last read data. In this case - * the kernel will not over-write unread data. - */ - __u64 data_head; /* head in the data section */ - __u64 data_tail; /* user-space written tail */ -}; - -#define PERF_EVENT_MISC_CPUMODE_MASK (3 << 0) -#define PERF_EVENT_MISC_CPUMODE_UNKNOWN (0 << 0) -#define PERF_EVENT_MISC_KERNEL (1 << 0) -#define PERF_EVENT_MISC_USER (2 << 0) -#define PERF_EVENT_MISC_HYPERVISOR (3 << 0) - -struct perf_event_header { - __u32 type; - __u16 misc; - __u16 size; -}; - -enum perf_event_type { - - /* - * The MMAP events record the PROT_EXEC mappings so that we can - * correlate userspace IPs to code. They have the following structure: - * - * struct { - * struct perf_event_header header; - * - * u32 pid, tid; - * u64 addr; - * u64 len; - * u64 pgoff; - * char filename[]; - * }; - */ - PERF_EVENT_MMAP = 1, - - /* - * struct { - * struct perf_event_header header; - * u64 id; - * u64 lost; - * }; - */ - PERF_EVENT_LOST = 2, - - /* - * struct { - * struct perf_event_header header; - * - * u32 pid, tid; - * char comm[]; - * }; - */ - PERF_EVENT_COMM = 3, - - /* - * struct { - * struct perf_event_header header; - * u32 pid, ppid; - * u32 tid, ptid; - * u64 time; - * }; - */ - PERF_EVENT_EXIT = 4, - - /* - * struct { - * struct perf_event_header header; - * u64 time; - * u64 id; - * u64 stream_id; - * }; - */ - PERF_EVENT_THROTTLE = 5, - PERF_EVENT_UNTHROTTLE = 6, - - /* - * struct { - * struct perf_event_header header; - * u32 pid, ppid; - * u32 tid, ptid; - * { u64 time; } && PERF_SAMPLE_TIME - * }; - */ - PERF_EVENT_FORK = 7, - - /* - * struct { - * struct perf_event_header header; - * u32 pid, tid; - * - * struct read_format values; - * }; - */ - PERF_EVENT_READ = 8, - - /* - * struct { - * struct perf_event_header header; - * - * { u64 ip; } && PERF_SAMPLE_IP - * { u32 pid, tid; } && PERF_SAMPLE_TID - * { u64 time; } && PERF_SAMPLE_TIME - * { u64 addr; } && PERF_SAMPLE_ADDR - * { u64 id; } && PERF_SAMPLE_ID - * { u64 stream_id;} && PERF_SAMPLE_STREAM_ID - * { u32 cpu, res; } && PERF_SAMPLE_CPU - * { u64 period; } && PERF_SAMPLE_PERIOD - * - * { struct read_format values; } && PERF_SAMPLE_READ - * - * { u64 nr, - * u64 ips[nr]; } && PERF_SAMPLE_CALLCHAIN - * - * # - * # The RAW record below is opaque data wrt the ABI - * # - * # That is, the ABI doesn't make any promises wrt to - * # the stability of its content, it may vary depending - * # on event, hardware, kernel version and phase of - * # the moon. - * # - * # In other words, PERF_SAMPLE_RAW contents are not an ABI. - * # - * - * { u32 size; - * char data[size];}&& PERF_SAMPLE_RAW - * }; - */ - PERF_EVENT_SAMPLE = 9, - - PERF_EVENT_MAX, /* non-ABI */ -}; - -enum perf_callchain_context { - PERF_CONTEXT_HV = (__u64)-32, - PERF_CONTEXT_KERNEL = (__u64)-128, - PERF_CONTEXT_USER = (__u64)-512, - - PERF_CONTEXT_GUEST = (__u64)-2048, - PERF_CONTEXT_GUEST_KERNEL = (__u64)-2176, - PERF_CONTEXT_GUEST_USER = (__u64)-2560, - - PERF_CONTEXT_MAX = (__u64)-4095, -}; - -#define PERF_FLAG_FD_NO_GROUP (1U << 0) -#define PERF_FLAG_FD_OUTPUT (1U << 1) - -#ifdef __KERNEL__ -/* - * Kernel-internal data types and definitions: - */ - -#ifdef CONFIG_PERF_COUNTERS -# include -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define PERF_MAX_STACK_DEPTH 255 - -struct perf_callchain_entry { - __u64 nr; - __u64 ip[PERF_MAX_STACK_DEPTH]; -}; - -struct perf_raw_record { - u32 size; - void *data; -}; - -struct task_struct; - -/** - * struct hw_perf_counter - performance counter hardware details: - */ -struct hw_perf_counter { -#ifdef CONFIG_PERF_COUNTERS - union { - struct { /* hardware */ - u64 config; - unsigned long config_base; - unsigned long counter_base; - int idx; - }; - union { /* software */ - atomic64_t count; - struct hrtimer hrtimer; - }; - }; - atomic64_t prev_count; - u64 sample_period; - u64 last_period; - atomic64_t period_left; - u64 interrupts; - - u64 freq_count; - u64 freq_interrupts; - u64 freq_stamp; -#endif -}; - -struct perf_counter; - -/** - * struct pmu - generic performance monitoring unit - */ -struct pmu { - int (*enable) (struct perf_counter *counter); - void (*disable) (struct perf_counter *counter); - void (*read) (struct perf_counter *counter); - void (*unthrottle) (struct perf_counter *counter); -}; - -/** - * enum perf_counter_active_state - the states of a counter - */ -enum perf_counter_active_state { - PERF_COUNTER_STATE_ERROR = -2, - PERF_COUNTER_STATE_OFF = -1, - PERF_COUNTER_STATE_INACTIVE = 0, - PERF_COUNTER_STATE_ACTIVE = 1, -}; - -struct file; - -struct perf_mmap_data { - struct rcu_head rcu_head; - int nr_pages; /* nr of data pages */ - int writable; /* are we writable */ - int nr_locked; /* nr pages mlocked */ - - atomic_t poll; /* POLL_ for wakeups */ - atomic_t events; /* event limit */ - - atomic_long_t head; /* write position */ - atomic_long_t done_head; /* completed head */ - - atomic_t lock; /* concurrent writes */ - atomic_t wakeup; /* needs a wakeup */ - atomic_t lost; /* nr records lost */ - - long watermark; /* wakeup watermark */ - - struct perf_counter_mmap_page *user_page; - void *data_pages[0]; -}; - -struct perf_pending_entry { - struct perf_pending_entry *next; - void (*func)(struct perf_pending_entry *); -}; - -/** - * struct perf_counter - performance counter kernel representation: - */ -struct perf_counter { -#ifdef CONFIG_PERF_COUNTERS - struct list_head group_entry; - struct list_head event_entry; - struct list_head sibling_list; - int nr_siblings; - struct perf_counter *group_leader; - struct perf_counter *output; - const struct pmu *pmu; - - enum perf_counter_active_state state; - atomic64_t count; - - /* - * These are the total time in nanoseconds that the counter - * has been enabled (i.e. eligible to run, and the task has - * been scheduled in, if this is a per-task counter) - * and running (scheduled onto the CPU), respectively. - * - * They are computed from tstamp_enabled, tstamp_running and - * tstamp_stopped when the counter is in INACTIVE or ACTIVE state. - */ - u64 total_time_enabled; - u64 total_time_running; - - /* - * These are timestamps used for computing total_time_enabled - * and total_time_running when the counter is in INACTIVE or - * ACTIVE state, measured in nanoseconds from an arbitrary point - * in time. - * tstamp_enabled: the notional time when the counter was enabled - * tstamp_running: the notional time when the counter was scheduled on - * tstamp_stopped: in INACTIVE state, the notional time when the - * counter was scheduled off. - */ - u64 tstamp_enabled; - u64 tstamp_running; - u64 tstamp_stopped; - - struct perf_counter_attr attr; - struct hw_perf_counter hw; - - struct perf_counter_context *ctx; - struct file *filp; - - /* - * These accumulate total time (in nanoseconds) that children - * counters have been enabled and running, respectively. - */ - atomic64_t child_total_time_enabled; - atomic64_t child_total_time_running; - - /* - * Protect attach/detach and child_list: - */ - struct mutex child_mutex; - struct list_head child_list; - struct perf_counter *parent; - - int oncpu; - int cpu; - - struct list_head owner_entry; - struct task_struct *owner; - - /* mmap bits */ - struct mutex mmap_mutex; - atomic_t mmap_count; - struct perf_mmap_data *data; - - /* poll related */ - wait_queue_head_t waitq; - struct fasync_struct *fasync; - - /* delayed work for NMIs and such */ - int pending_wakeup; - int pending_kill; - int pending_disable; - struct perf_pending_entry pending; - - atomic_t event_limit; - - void (*destroy)(struct perf_counter *); - struct rcu_head rcu_head; - - struct pid_namespace *ns; - u64 id; -#endif -}; - -/** - * struct perf_counter_context - counter context structure - * - * Used as a container for task counters and CPU counters as well: - */ -struct perf_counter_context { - /* - * Protect the states of the counters in the list, - * nr_active, and the list: - */ - spinlock_t lock; - /* - * Protect the list of counters. Locking either mutex or lock - * is sufficient to ensure the list doesn't change; to change - * the list you need to lock both the mutex and the spinlock. - */ - struct mutex mutex; - - struct list_head group_list; - struct list_head event_list; - int nr_counters; - int nr_active; - int is_active; - int nr_stat; - atomic_t refcount; - struct task_struct *task; - - /* - * Context clock, runs when context enabled. - */ - u64 time; - u64 timestamp; - - /* - * These fields let us detect when two contexts have both - * been cloned (inherited) from a common ancestor. - */ - struct perf_counter_context *parent_ctx; - u64 parent_gen; - u64 generation; - int pin_count; - struct rcu_head rcu_head; -}; - -/** - * struct perf_counter_cpu_context - per cpu counter context structure - */ -struct perf_cpu_context { - struct perf_counter_context ctx; - struct perf_counter_context *task_ctx; - int active_oncpu; - int max_pertask; - int exclusive; - - /* - * Recursion avoidance: - * - * task, softirq, irq, nmi context - */ - int recursion[4]; -}; - -struct perf_output_handle { - struct perf_counter *counter; - struct perf_mmap_data *data; - unsigned long head; - unsigned long offset; - int nmi; - int sample; - int locked; - unsigned long flags; -}; - -#ifdef CONFIG_PERF_COUNTERS - -/* - * Set by architecture code: - */ -extern int perf_max_counters; - -extern const struct pmu *hw_perf_counter_init(struct perf_counter *counter); - -extern void perf_counter_task_sched_in(struct task_struct *task, int cpu); -extern void perf_counter_task_sched_out(struct task_struct *task, - struct task_struct *next, int cpu); -extern void perf_counter_task_tick(struct task_struct *task, int cpu); -extern int perf_counter_init_task(struct task_struct *child); -extern void perf_counter_exit_task(struct task_struct *child); -extern void perf_counter_free_task(struct task_struct *task); -extern void set_perf_counter_pending(void); -extern void perf_counter_do_pending(void); -extern void perf_counter_print_debug(void); -extern void __perf_disable(void); -extern bool __perf_enable(void); -extern void perf_disable(void); -extern void perf_enable(void); -extern int perf_counter_task_disable(void); -extern int perf_counter_task_enable(void); -extern int hw_perf_group_sched_in(struct perf_counter *group_leader, - struct perf_cpu_context *cpuctx, - struct perf_counter_context *ctx, int cpu); -extern void perf_counter_update_userpage(struct perf_counter *counter); - -struct perf_sample_data { - u64 type; - - u64 ip; - struct { - u32 pid; - u32 tid; - } tid_entry; - u64 time; - u64 addr; - u64 id; - u64 stream_id; - struct { - u32 cpu; - u32 reserved; - } cpu_entry; - u64 period; - struct perf_callchain_entry *callchain; - struct perf_raw_record *raw; -}; - -extern void perf_output_sample(struct perf_output_handle *handle, - struct perf_event_header *header, - struct perf_sample_data *data, - struct perf_counter *counter); -extern void perf_prepare_sample(struct perf_event_header *header, - struct perf_sample_data *data, - struct perf_counter *counter, - struct pt_regs *regs); - -extern int perf_counter_overflow(struct perf_counter *counter, int nmi, - struct perf_sample_data *data, - struct pt_regs *regs); - -/* - * Return 1 for a software counter, 0 for a hardware counter - */ -static inline int is_software_counter(struct perf_counter *counter) -{ - return (counter->attr.type != PERF_TYPE_RAW) && - (counter->attr.type != PERF_TYPE_HARDWARE) && - (counter->attr.type != PERF_TYPE_HW_CACHE); -} - -extern atomic_t perf_swcounter_enabled[PERF_COUNT_SW_MAX]; - -extern void __perf_swcounter_event(u32, u64, int, struct pt_regs *, u64); - -static inline void -perf_swcounter_event(u32 event, u64 nr, int nmi, struct pt_regs *regs, u64 addr) -{ - if (atomic_read(&perf_swcounter_enabled[event])) - __perf_swcounter_event(event, nr, nmi, regs, addr); -} - -extern void __perf_counter_mmap(struct vm_area_struct *vma); - -static inline void perf_counter_mmap(struct vm_area_struct *vma) -{ - if (vma->vm_flags & VM_EXEC) - __perf_counter_mmap(vma); -} - -extern void perf_counter_comm(struct task_struct *tsk); -extern void perf_counter_fork(struct task_struct *tsk); - -extern struct perf_callchain_entry *perf_callchain(struct pt_regs *regs); - -extern int sysctl_perf_counter_paranoid; -extern int sysctl_perf_counter_mlock; -extern int sysctl_perf_counter_sample_rate; - -extern void perf_counter_init(void); -extern void perf_tpcounter_event(int event_id, u64 addr, u64 count, - void *record, int entry_size); - -#ifndef perf_misc_flags -#define perf_misc_flags(regs) (user_mode(regs) ? PERF_EVENT_MISC_USER : \ - PERF_EVENT_MISC_KERNEL) -#define perf_instruction_pointer(regs) instruction_pointer(regs) -#endif - -extern int perf_output_begin(struct perf_output_handle *handle, - struct perf_counter *counter, unsigned int size, - int nmi, int sample); -extern void perf_output_end(struct perf_output_handle *handle); -extern void perf_output_copy(struct perf_output_handle *handle, - const void *buf, unsigned int len); -#else -static inline void -perf_counter_task_sched_in(struct task_struct *task, int cpu) { } -static inline void -perf_counter_task_sched_out(struct task_struct *task, - struct task_struct *next, int cpu) { } -static inline void -perf_counter_task_tick(struct task_struct *task, int cpu) { } -static inline int perf_counter_init_task(struct task_struct *child) { return 0; } -static inline void perf_counter_exit_task(struct task_struct *child) { } -static inline void perf_counter_free_task(struct task_struct *task) { } -static inline void perf_counter_do_pending(void) { } -static inline void perf_counter_print_debug(void) { } -static inline void perf_disable(void) { } -static inline void perf_enable(void) { } -static inline int perf_counter_task_disable(void) { return -EINVAL; } -static inline int perf_counter_task_enable(void) { return -EINVAL; } - -static inline void -perf_swcounter_event(u32 event, u64 nr, int nmi, - struct pt_regs *regs, u64 addr) { } - -static inline void perf_counter_mmap(struct vm_area_struct *vma) { } -static inline void perf_counter_comm(struct task_struct *tsk) { } -static inline void perf_counter_fork(struct task_struct *tsk) { } -static inline void perf_counter_init(void) { } - -#endif - -#define perf_output_put(handle, x) \ - perf_output_copy((handle), &(x), sizeof(x)) - -#endif /* __KERNEL__ */ -#endif /* _LINUX_PERF_COUNTER_H */ diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h new file mode 100644 index 000000000000..ae9d9ed6df2a --- /dev/null +++ b/include/linux/perf_event.h @@ -0,0 +1,858 @@ +/* + * Performance events: + * + * Copyright (C) 2008-2009, Thomas Gleixner + * Copyright (C) 2008-2009, Red Hat, Inc., Ingo Molnar + * Copyright (C) 2008-2009, Red Hat, Inc., Peter Zijlstra + * + * Data type definitions, declarations, prototypes. + * + * Started by: Thomas Gleixner and Ingo Molnar + * + * For licencing details see kernel-base/COPYING + */ +#ifndef _LINUX_PERF_EVENT_H +#define _LINUX_PERF_EVENT_H + +#include +#include +#include + +/* + * User-space ABI bits: + */ + +/* + * attr.type + */ +enum perf_type_id { + PERF_TYPE_HARDWARE = 0, + PERF_TYPE_SOFTWARE = 1, + PERF_TYPE_TRACEPOINT = 2, + PERF_TYPE_HW_CACHE = 3, + PERF_TYPE_RAW = 4, + + PERF_TYPE_MAX, /* non-ABI */ +}; + +/* + * Generalized performance event event_id types, used by the + * attr.event_id parameter of the sys_perf_event_open() + * syscall: + */ +enum perf_hw_id { + /* + * Common hardware events, generalized by the kernel: + */ + PERF_COUNT_HW_CPU_CYCLES = 0, + PERF_COUNT_HW_INSTRUCTIONS = 1, + PERF_COUNT_HW_CACHE_REFERENCES = 2, + PERF_COUNT_HW_CACHE_MISSES = 3, + PERF_COUNT_HW_BRANCH_INSTRUCTIONS = 4, + PERF_COUNT_HW_BRANCH_MISSES = 5, + PERF_COUNT_HW_BUS_CYCLES = 6, + + PERF_COUNT_HW_MAX, /* non-ABI */ +}; + +/* + * Generalized hardware cache events: + * + * { L1-D, L1-I, LLC, ITLB, DTLB, BPU } x + * { read, write, prefetch } x + * { accesses, misses } + */ +enum perf_hw_cache_id { + PERF_COUNT_HW_CACHE_L1D = 0, + PERF_COUNT_HW_CACHE_L1I = 1, + PERF_COUNT_HW_CACHE_LL = 2, + PERF_COUNT_HW_CACHE_DTLB = 3, + PERF_COUNT_HW_CACHE_ITLB = 4, + PERF_COUNT_HW_CACHE_BPU = 5, + + PERF_COUNT_HW_CACHE_MAX, /* non-ABI */ +}; + +enum perf_hw_cache_op_id { + PERF_COUNT_HW_CACHE_OP_READ = 0, + PERF_COUNT_HW_CACHE_OP_WRITE = 1, + PERF_COUNT_HW_CACHE_OP_PREFETCH = 2, + + PERF_COUNT_HW_CACHE_OP_MAX, /* non-ABI */ +}; + +enum perf_hw_cache_op_result_id { + PERF_COUNT_HW_CACHE_RESULT_ACCESS = 0, + PERF_COUNT_HW_CACHE_RESULT_MISS = 1, + + PERF_COUNT_HW_CACHE_RESULT_MAX, /* non-ABI */ +}; + +/* + * Special "software" events provided by the kernel, even if the hardware + * does not support performance events. These events measure various + * physical and sw events of the kernel (and allow the profiling of them as + * well): + */ +enum perf_sw_ids { + PERF_COUNT_SW_CPU_CLOCK = 0, + PERF_COUNT_SW_TASK_CLOCK = 1, + PERF_COUNT_SW_PAGE_FAULTS = 2, + PERF_COUNT_SW_CONTEXT_SWITCHES = 3, + PERF_COUNT_SW_CPU_MIGRATIONS = 4, + PERF_COUNT_SW_PAGE_FAULTS_MIN = 5, + PERF_COUNT_SW_PAGE_FAULTS_MAJ = 6, + + PERF_COUNT_SW_MAX, /* non-ABI */ +}; + +/* + * Bits that can be set in attr.sample_type to request information + * in the overflow packets. + */ +enum perf_event_sample_format { + PERF_SAMPLE_IP = 1U << 0, + PERF_SAMPLE_TID = 1U << 1, + PERF_SAMPLE_TIME = 1U << 2, + PERF_SAMPLE_ADDR = 1U << 3, + PERF_SAMPLE_READ = 1U << 4, + PERF_SAMPLE_CALLCHAIN = 1U << 5, + PERF_SAMPLE_ID = 1U << 6, + PERF_SAMPLE_CPU = 1U << 7, + PERF_SAMPLE_PERIOD = 1U << 8, + PERF_SAMPLE_STREAM_ID = 1U << 9, + PERF_SAMPLE_RAW = 1U << 10, + + PERF_SAMPLE_MAX = 1U << 11, /* non-ABI */ +}; + +/* + * The format of the data returned by read() on a perf event fd, + * as specified by attr.read_format: + * + * struct read_format { + * { u64 value; + * { u64 time_enabled; } && PERF_FORMAT_ENABLED + * { u64 time_running; } && PERF_FORMAT_RUNNING + * { u64 id; } && PERF_FORMAT_ID + * } && !PERF_FORMAT_GROUP + * + * { u64 nr; + * { u64 time_enabled; } && PERF_FORMAT_ENABLED + * { u64 time_running; } && PERF_FORMAT_RUNNING + * { u64 value; + * { u64 id; } && PERF_FORMAT_ID + * } cntr[nr]; + * } && PERF_FORMAT_GROUP + * }; + */ +enum perf_event_read_format { + PERF_FORMAT_TOTAL_TIME_ENABLED = 1U << 0, + PERF_FORMAT_TOTAL_TIME_RUNNING = 1U << 1, + PERF_FORMAT_ID = 1U << 2, + PERF_FORMAT_GROUP = 1U << 3, + + PERF_FORMAT_MAX = 1U << 4, /* non-ABI */ +}; + +#define PERF_ATTR_SIZE_VER0 64 /* sizeof first published struct */ + +/* + * Hardware event_id to monitor via a performance monitoring event: + */ +struct perf_event_attr { + + /* + * Major type: hardware/software/tracepoint/etc. + */ + __u32 type; + + /* + * Size of the attr structure, for fwd/bwd compat. + */ + __u32 size; + + /* + * Type specific configuration information. + */ + __u64 config; + + union { + __u64 sample_period; + __u64 sample_freq; + }; + + __u64 sample_type; + __u64 read_format; + + __u64 disabled : 1, /* off by default */ + inherit : 1, /* children inherit it */ + pinned : 1, /* must always be on PMU */ + exclusive : 1, /* only group on PMU */ + exclude_user : 1, /* don't count user */ + exclude_kernel : 1, /* ditto kernel */ + exclude_hv : 1, /* ditto hypervisor */ + exclude_idle : 1, /* don't count when idle */ + mmap : 1, /* include mmap data */ + comm : 1, /* include comm data */ + freq : 1, /* use freq, not period */ + inherit_stat : 1, /* per task counts */ + enable_on_exec : 1, /* next exec enables */ + task : 1, /* trace fork/exit */ + watermark : 1, /* wakeup_watermark */ + + __reserved_1 : 49; + + union { + __u32 wakeup_events; /* wakeup every n events */ + __u32 wakeup_watermark; /* bytes before wakeup */ + }; + __u32 __reserved_2; + + __u64 __reserved_3; +}; + +/* + * Ioctls that can be done on a perf event fd: + */ +#define PERF_EVENT_IOC_ENABLE _IO ('$', 0) +#define PERF_EVENT_IOC_DISABLE _IO ('$', 1) +#define PERF_EVENT_IOC_REFRESH _IO ('$', 2) +#define PERF_EVENT_IOC_RESET _IO ('$', 3) +#define PERF_EVENT_IOC_PERIOD _IOW('$', 4, u64) +#define PERF_EVENT_IOC_SET_OUTPUT _IO ('$', 5) + +enum perf_event_ioc_flags { + PERF_IOC_FLAG_GROUP = 1U << 0, +}; + +/* + * Structure of the page that can be mapped via mmap + */ +struct perf_event_mmap_page { + __u32 version; /* version number of this structure */ + __u32 compat_version; /* lowest version this is compat with */ + + /* + * Bits needed to read the hw events in user-space. + * + * u32 seq; + * s64 count; + * + * do { + * seq = pc->lock; + * + * barrier() + * if (pc->index) { + * count = pmc_read(pc->index - 1); + * count += pc->offset; + * } else + * goto regular_read; + * + * barrier(); + * } while (pc->lock != seq); + * + * NOTE: for obvious reason this only works on self-monitoring + * processes. + */ + __u32 lock; /* seqlock for synchronization */ + __u32 index; /* hardware event identifier */ + __s64 offset; /* add to hardware event value */ + __u64 time_enabled; /* time event active */ + __u64 time_running; /* time event on cpu */ + + /* + * Hole for extension of the self monitor capabilities + */ + + __u64 __reserved[123]; /* align to 1k */ + + /* + * Control data for the mmap() data buffer. + * + * User-space reading the @data_head value should issue an rmb(), on + * SMP capable platforms, after reading this value -- see + * perf_event_wakeup(). + * + * When the mapping is PROT_WRITE the @data_tail value should be + * written by userspace to reflect the last read data. In this case + * the kernel will not over-write unread data. + */ + __u64 data_head; /* head in the data section */ + __u64 data_tail; /* user-space written tail */ +}; + +#define PERF_RECORD_MISC_CPUMODE_MASK (3 << 0) +#define PERF_RECORD_MISC_CPUMODE_UNKNOWN (0 << 0) +#define PERF_RECORD_MISC_KERNEL (1 << 0) +#define PERF_RECORD_MISC_USER (2 << 0) +#define PERF_RECORD_MISC_HYPERVISOR (3 << 0) + +struct perf_event_header { + __u32 type; + __u16 misc; + __u16 size; +}; + +enum perf_event_type { + + /* + * The MMAP events record the PROT_EXEC mappings so that we can + * correlate userspace IPs to code. They have the following structure: + * + * struct { + * struct perf_event_header header; + * + * u32 pid, tid; + * u64 addr; + * u64 len; + * u64 pgoff; + * char filename[]; + * }; + */ + PERF_RECORD_MMAP = 1, + + /* + * struct { + * struct perf_event_header header; + * u64 id; + * u64 lost; + * }; + */ + PERF_RECORD_LOST = 2, + + /* + * struct { + * struct perf_event_header header; + * + * u32 pid, tid; + * char comm[]; + * }; + */ + PERF_RECORD_COMM = 3, + + /* + * struct { + * struct perf_event_header header; + * u32 pid, ppid; + * u32 tid, ptid; + * u64 time; + * }; + */ + PERF_RECORD_EXIT = 4, + + /* + * struct { + * struct perf_event_header header; + * u64 time; + * u64 id; + * u64 stream_id; + * }; + */ + PERF_RECORD_THROTTLE = 5, + PERF_RECORD_UNTHROTTLE = 6, + + /* + * struct { + * struct perf_event_header header; + * u32 pid, ppid; + * u32 tid, ptid; + * { u64 time; } && PERF_SAMPLE_TIME + * }; + */ + PERF_RECORD_FORK = 7, + + /* + * struct { + * struct perf_event_header header; + * u32 pid, tid; + * + * struct read_format values; + * }; + */ + PERF_RECORD_READ = 8, + + /* + * struct { + * struct perf_event_header header; + * + * { u64 ip; } && PERF_SAMPLE_IP + * { u32 pid, tid; } && PERF_SAMPLE_TID + * { u64 time; } && PERF_SAMPLE_TIME + * { u64 addr; } && PERF_SAMPLE_ADDR + * { u64 id; } && PERF_SAMPLE_ID + * { u64 stream_id;} && PERF_SAMPLE_STREAM_ID + * { u32 cpu, res; } && PERF_SAMPLE_CPU + * { u64 period; } && PERF_SAMPLE_PERIOD + * + * { struct read_format values; } && PERF_SAMPLE_READ + * + * { u64 nr, + * u64 ips[nr]; } && PERF_SAMPLE_CALLCHAIN + * + * # + * # The RAW record below is opaque data wrt the ABI + * # + * # That is, the ABI doesn't make any promises wrt to + * # the stability of its content, it may vary depending + * # on event_id, hardware, kernel version and phase of + * # the moon. + * # + * # In other words, PERF_SAMPLE_RAW contents are not an ABI. + * # + * + * { u32 size; + * char data[size];}&& PERF_SAMPLE_RAW + * }; + */ + PERF_RECORD_SAMPLE = 9, + + PERF_RECORD_MAX, /* non-ABI */ +}; + +enum perf_callchain_context { + PERF_CONTEXT_HV = (__u64)-32, + PERF_CONTEXT_KERNEL = (__u64)-128, + PERF_CONTEXT_USER = (__u64)-512, + + PERF_CONTEXT_GUEST = (__u64)-2048, + PERF_CONTEXT_GUEST_KERNEL = (__u64)-2176, + PERF_CONTEXT_GUEST_USER = (__u64)-2560, + + PERF_CONTEXT_MAX = (__u64)-4095, +}; + +#define PERF_FLAG_FD_NO_GROUP (1U << 0) +#define PERF_FLAG_FD_OUTPUT (1U << 1) + +#ifdef __KERNEL__ +/* + * Kernel-internal data types and definitions: + */ + +#ifdef CONFIG_PERF_EVENTS +# include +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PERF_MAX_STACK_DEPTH 255 + +struct perf_callchain_entry { + __u64 nr; + __u64 ip[PERF_MAX_STACK_DEPTH]; +}; + +struct perf_raw_record { + u32 size; + void *data; +}; + +struct task_struct; + +/** + * struct hw_perf_event - performance event hardware details: + */ +struct hw_perf_event { +#ifdef CONFIG_PERF_EVENTS + union { + struct { /* hardware */ + u64 config; + unsigned long config_base; + unsigned long event_base; + int idx; + }; + union { /* software */ + atomic64_t count; + struct hrtimer hrtimer; + }; + }; + atomic64_t prev_count; + u64 sample_period; + u64 last_period; + atomic64_t period_left; + u64 interrupts; + + u64 freq_count; + u64 freq_interrupts; + u64 freq_stamp; +#endif +}; + +struct perf_event; + +/** + * struct pmu - generic performance monitoring unit + */ +struct pmu { + int (*enable) (struct perf_event *event); + void (*disable) (struct perf_event *event); + void (*read) (struct perf_event *event); + void (*unthrottle) (struct perf_event *event); +}; + +/** + * enum perf_event_active_state - the states of a event + */ +enum perf_event_active_state { + PERF_EVENT_STATE_ERROR = -2, + PERF_EVENT_STATE_OFF = -1, + PERF_EVENT_STATE_INACTIVE = 0, + PERF_EVENT_STATE_ACTIVE = 1, +}; + +struct file; + +struct perf_mmap_data { + struct rcu_head rcu_head; + int nr_pages; /* nr of data pages */ + int writable; /* are we writable */ + int nr_locked; /* nr pages mlocked */ + + atomic_t poll; /* POLL_ for wakeups */ + atomic_t events; /* event_id limit */ + + atomic_long_t head; /* write position */ + atomic_long_t done_head; /* completed head */ + + atomic_t lock; /* concurrent writes */ + atomic_t wakeup; /* needs a wakeup */ + atomic_t lost; /* nr records lost */ + + long watermark; /* wakeup watermark */ + + struct perf_event_mmap_page *user_page; + void *data_pages[0]; +}; + +struct perf_pending_entry { + struct perf_pending_entry *next; + void (*func)(struct perf_pending_entry *); +}; + +/** + * struct perf_event - performance event kernel representation: + */ +struct perf_event { +#ifdef CONFIG_PERF_EVENTS + struct list_head group_entry; + struct list_head event_entry; + struct list_head sibling_list; + int nr_siblings; + struct perf_event *group_leader; + struct perf_event *output; + const struct pmu *pmu; + + enum perf_event_active_state state; + atomic64_t count; + + /* + * These are the total time in nanoseconds that the event + * has been enabled (i.e. eligible to run, and the task has + * been scheduled in, if this is a per-task event) + * and running (scheduled onto the CPU), respectively. + * + * They are computed from tstamp_enabled, tstamp_running and + * tstamp_stopped when the event is in INACTIVE or ACTIVE state. + */ + u64 total_time_enabled; + u64 total_time_running; + + /* + * These are timestamps used for computing total_time_enabled + * and total_time_running when the event is in INACTIVE or + * ACTIVE state, measured in nanoseconds from an arbitrary point + * in time. + * tstamp_enabled: the notional time when the event was enabled + * tstamp_running: the notional time when the event was scheduled on + * tstamp_stopped: in INACTIVE state, the notional time when the + * event was scheduled off. + */ + u64 tstamp_enabled; + u64 tstamp_running; + u64 tstamp_stopped; + + struct perf_event_attr attr; + struct hw_perf_event hw; + + struct perf_event_context *ctx; + struct file *filp; + + /* + * These accumulate total time (in nanoseconds) that children + * events have been enabled and running, respectively. + */ + atomic64_t child_total_time_enabled; + atomic64_t child_total_time_running; + + /* + * Protect attach/detach and child_list: + */ + struct mutex child_mutex; + struct list_head child_list; + struct perf_event *parent; + + int oncpu; + int cpu; + + struct list_head owner_entry; + struct task_struct *owner; + + /* mmap bits */ + struct mutex mmap_mutex; + atomic_t mmap_count; + struct perf_mmap_data *data; + + /* poll related */ + wait_queue_head_t waitq; + struct fasync_struct *fasync; + + /* delayed work for NMIs and such */ + int pending_wakeup; + int pending_kill; + int pending_disable; + struct perf_pending_entry pending; + + atomic_t event_limit; + + void (*destroy)(struct perf_event *); + struct rcu_head rcu_head; + + struct pid_namespace *ns; + u64 id; +#endif +}; + +/** + * struct perf_event_context - event context structure + * + * Used as a container for task events and CPU events as well: + */ +struct perf_event_context { + /* + * Protect the states of the events in the list, + * nr_active, and the list: + */ + spinlock_t lock; + /* + * Protect the list of events. Locking either mutex or lock + * is sufficient to ensure the list doesn't change; to change + * the list you need to lock both the mutex and the spinlock. + */ + struct mutex mutex; + + struct list_head group_list; + struct list_head event_list; + int nr_events; + int nr_active; + int is_active; + int nr_stat; + atomic_t refcount; + struct task_struct *task; + + /* + * Context clock, runs when context enabled. + */ + u64 time; + u64 timestamp; + + /* + * These fields let us detect when two contexts have both + * been cloned (inherited) from a common ancestor. + */ + struct perf_event_context *parent_ctx; + u64 parent_gen; + u64 generation; + int pin_count; + struct rcu_head rcu_head; +}; + +/** + * struct perf_event_cpu_context - per cpu event context structure + */ +struct perf_cpu_context { + struct perf_event_context ctx; + struct perf_event_context *task_ctx; + int active_oncpu; + int max_pertask; + int exclusive; + + /* + * Recursion avoidance: + * + * task, softirq, irq, nmi context + */ + int recursion[4]; +}; + +struct perf_output_handle { + struct perf_event *event; + struct perf_mmap_data *data; + unsigned long head; + unsigned long offset; + int nmi; + int sample; + int locked; + unsigned long flags; +}; + +#ifdef CONFIG_PERF_EVENTS + +/* + * Set by architecture code: + */ +extern int perf_max_events; + +extern const struct pmu *hw_perf_event_init(struct perf_event *event); + +extern void perf_event_task_sched_in(struct task_struct *task, int cpu); +extern void perf_event_task_sched_out(struct task_struct *task, + struct task_struct *next, int cpu); +extern void perf_event_task_tick(struct task_struct *task, int cpu); +extern int perf_event_init_task(struct task_struct *child); +extern void perf_event_exit_task(struct task_struct *child); +extern void perf_event_free_task(struct task_struct *task); +extern void set_perf_event_pending(void); +extern void perf_event_do_pending(void); +extern void perf_event_print_debug(void); +extern void __perf_disable(void); +extern bool __perf_enable(void); +extern void perf_disable(void); +extern void perf_enable(void); +extern int perf_event_task_disable(void); +extern int perf_event_task_enable(void); +extern int hw_perf_group_sched_in(struct perf_event *group_leader, + struct perf_cpu_context *cpuctx, + struct perf_event_context *ctx, int cpu); +extern void perf_event_update_userpage(struct perf_event *event); + +struct perf_sample_data { + u64 type; + + u64 ip; + struct { + u32 pid; + u32 tid; + } tid_entry; + u64 time; + u64 addr; + u64 id; + u64 stream_id; + struct { + u32 cpu; + u32 reserved; + } cpu_entry; + u64 period; + struct perf_callchain_entry *callchain; + struct perf_raw_record *raw; +}; + +extern void perf_output_sample(struct perf_output_handle *handle, + struct perf_event_header *header, + struct perf_sample_data *data, + struct perf_event *event); +extern void perf_prepare_sample(struct perf_event_header *header, + struct perf_sample_data *data, + struct perf_event *event, + struct pt_regs *regs); + +extern int perf_event_overflow(struct perf_event *event, int nmi, + struct perf_sample_data *data, + struct pt_regs *regs); + +/* + * Return 1 for a software event, 0 for a hardware event + */ +static inline int is_software_event(struct perf_event *event) +{ + return (event->attr.type != PERF_TYPE_RAW) && + (event->attr.type != PERF_TYPE_HARDWARE) && + (event->attr.type != PERF_TYPE_HW_CACHE); +} + +extern atomic_t perf_swevent_enabled[PERF_COUNT_SW_MAX]; + +extern void __perf_sw_event(u32, u64, int, struct pt_regs *, u64); + +static inline void +perf_sw_event(u32 event_id, u64 nr, int nmi, struct pt_regs *regs, u64 addr) +{ + if (atomic_read(&perf_swevent_enabled[event_id])) + __perf_sw_event(event_id, nr, nmi, regs, addr); +} + +extern void __perf_event_mmap(struct vm_area_struct *vma); + +static inline void perf_event_mmap(struct vm_area_struct *vma) +{ + if (vma->vm_flags & VM_EXEC) + __perf_event_mmap(vma); +} + +extern void perf_event_comm(struct task_struct *tsk); +extern void perf_event_fork(struct task_struct *tsk); + +extern struct perf_callchain_entry *perf_callchain(struct pt_regs *regs); + +extern int sysctl_perf_event_paranoid; +extern int sysctl_perf_event_mlock; +extern int sysctl_perf_event_sample_rate; + +extern void perf_event_init(void); +extern void perf_tp_event(int event_id, u64 addr, u64 count, + void *record, int entry_size); + +#ifndef perf_misc_flags +#define perf_misc_flags(regs) (user_mode(regs) ? PERF_RECORD_MISC_USER : \ + PERF_RECORD_MISC_KERNEL) +#define perf_instruction_pointer(regs) instruction_pointer(regs) +#endif + +extern int perf_output_begin(struct perf_output_handle *handle, + struct perf_event *event, unsigned int size, + int nmi, int sample); +extern void perf_output_end(struct perf_output_handle *handle); +extern void perf_output_copy(struct perf_output_handle *handle, + const void *buf, unsigned int len); +#else +static inline void +perf_event_task_sched_in(struct task_struct *task, int cpu) { } +static inline void +perf_event_task_sched_out(struct task_struct *task, + struct task_struct *next, int cpu) { } +static inline void +perf_event_task_tick(struct task_struct *task, int cpu) { } +static inline int perf_event_init_task(struct task_struct *child) { return 0; } +static inline void perf_event_exit_task(struct task_struct *child) { } +static inline void perf_event_free_task(struct task_struct *task) { } +static inline void perf_event_do_pending(void) { } +static inline void perf_event_print_debug(void) { } +static inline void perf_disable(void) { } +static inline void perf_enable(void) { } +static inline int perf_event_task_disable(void) { return -EINVAL; } +static inline int perf_event_task_enable(void) { return -EINVAL; } + +static inline void +perf_sw_event(u32 event_id, u64 nr, int nmi, + struct pt_regs *regs, u64 addr) { } + +static inline void perf_event_mmap(struct vm_area_struct *vma) { } +static inline void perf_event_comm(struct task_struct *tsk) { } +static inline void perf_event_fork(struct task_struct *tsk) { } +static inline void perf_event_init(void) { } + +#endif + +#define perf_output_put(handle, x) \ + perf_output_copy((handle), &(x), sizeof(x)) + +#endif /* __KERNEL__ */ +#endif /* _LINUX_PERF_EVENT_H */ diff --git a/include/linux/prctl.h b/include/linux/prctl.h index b00df4c79c63..07bff666e65b 100644 --- a/include/linux/prctl.h +++ b/include/linux/prctl.h @@ -85,7 +85,7 @@ #define PR_SET_TIMERSLACK 29 #define PR_GET_TIMERSLACK 30 -#define PR_TASK_PERF_COUNTERS_DISABLE 31 -#define PR_TASK_PERF_COUNTERS_ENABLE 32 +#define PR_TASK_PERF_EVENTS_DISABLE 31 +#define PR_TASK_PERF_EVENTS_ENABLE 32 #endif /* _LINUX_PRCTL_H */ diff --git a/include/linux/sched.h b/include/linux/sched.h index 8af3d249170e..8b265a8986d0 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -100,7 +100,7 @@ struct robust_list_head; struct bio; struct fs_struct; struct bts_context; -struct perf_counter_context; +struct perf_event_context; /* * List of flags we want to share for kernel threads, @@ -701,7 +701,7 @@ struct user_struct { #endif #endif -#ifdef CONFIG_PERF_COUNTERS +#ifdef CONFIG_PERF_EVENTS atomic_long_t locked_vm; #endif }; @@ -1449,10 +1449,10 @@ struct task_struct { struct list_head pi_state_list; struct futex_pi_state *pi_state_cache; #endif -#ifdef CONFIG_PERF_COUNTERS - struct perf_counter_context *perf_counter_ctxp; - struct mutex perf_counter_mutex; - struct list_head perf_counter_list; +#ifdef CONFIG_PERF_EVENTS + struct perf_event_context *perf_event_ctxp; + struct mutex perf_event_mutex; + struct list_head perf_event_list; #endif #ifdef CONFIG_NUMA struct mempolicy *mempolicy; /* Protected by alloc_lock */ diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index a8e37821cc60..02f19f9a76c6 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -55,7 +55,7 @@ struct compat_timeval; struct robust_list_head; struct getcpu_cache; struct old_linux_dirent; -struct perf_counter_attr; +struct perf_event_attr; #include #include @@ -885,7 +885,7 @@ asmlinkage long sys_ppoll(struct pollfd __user *, unsigned int, int kernel_execve(const char *filename, char *const argv[], char *const envp[]); -asmlinkage long sys_perf_counter_open( - struct perf_counter_attr __user *attr_uptr, +asmlinkage long sys_perf_event_open( + struct perf_event_attr __user *attr_uptr, pid_t pid, int cpu, int group_fd, unsigned long flags); #endif -- cgit v1.2.3 From 57c0c15b5244320065374ad2c54f4fbec77a6428 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 21 Sep 2009 12:20:38 +0200 Subject: perf: Tidy up after the big rename - provide compatibility Kconfig entry for existing PERF_COUNTERS .config's - provide courtesy copy of old perf_counter.h, for user-space projects - small indentation fixups - fix up MAINTAINERS - fix small x86 printout fallout - fix up small PowerPC comment fallout (use 'counter' as in register) Reviewed-by: Arjan van de Ven Acked-by: Peter Zijlstra Cc: Mike Galbraith Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: Frederic Weisbecker LKML-Reference: Signed-off-by: Ingo Molnar --- include/linux/perf_counter.h | 441 +++++++++++++++++++++++++++++++++++++++++++ include/linux/perf_event.h | 98 +++++----- 2 files changed, 490 insertions(+), 49 deletions(-) create mode 100644 include/linux/perf_counter.h (limited to 'include/linux') diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h new file mode 100644 index 000000000000..368bd70f1d2d --- /dev/null +++ b/include/linux/perf_counter.h @@ -0,0 +1,441 @@ +/* + * NOTE: this file will be removed in a future kernel release, it is + * provided as a courtesy copy of user-space code that relies on the + * old (pre-rename) symbols and constants. + * + * Performance events: + * + * Copyright (C) 2008-2009, Thomas Gleixner + * Copyright (C) 2008-2009, Red Hat, Inc., Ingo Molnar + * Copyright (C) 2008-2009, Red Hat, Inc., Peter Zijlstra + * + * Data type definitions, declarations, prototypes. + * + * Started by: Thomas Gleixner and Ingo Molnar + * + * For licencing details see kernel-base/COPYING + */ +#ifndef _LINUX_PERF_COUNTER_H +#define _LINUX_PERF_COUNTER_H + +#include +#include +#include + +/* + * User-space ABI bits: + */ + +/* + * attr.type + */ +enum perf_type_id { + PERF_TYPE_HARDWARE = 0, + PERF_TYPE_SOFTWARE = 1, + PERF_TYPE_TRACEPOINT = 2, + PERF_TYPE_HW_CACHE = 3, + PERF_TYPE_RAW = 4, + + PERF_TYPE_MAX, /* non-ABI */ +}; + +/* + * Generalized performance counter event types, used by the + * attr.event_id parameter of the sys_perf_counter_open() + * syscall: + */ +enum perf_hw_id { + /* + * Common hardware events, generalized by the kernel: + */ + PERF_COUNT_HW_CPU_CYCLES = 0, + PERF_COUNT_HW_INSTRUCTIONS = 1, + PERF_COUNT_HW_CACHE_REFERENCES = 2, + PERF_COUNT_HW_CACHE_MISSES = 3, + PERF_COUNT_HW_BRANCH_INSTRUCTIONS = 4, + PERF_COUNT_HW_BRANCH_MISSES = 5, + PERF_COUNT_HW_BUS_CYCLES = 6, + + PERF_COUNT_HW_MAX, /* non-ABI */ +}; + +/* + * Generalized hardware cache counters: + * + * { L1-D, L1-I, LLC, ITLB, DTLB, BPU } x + * { read, write, prefetch } x + * { accesses, misses } + */ +enum perf_hw_cache_id { + PERF_COUNT_HW_CACHE_L1D = 0, + PERF_COUNT_HW_CACHE_L1I = 1, + PERF_COUNT_HW_CACHE_LL = 2, + PERF_COUNT_HW_CACHE_DTLB = 3, + PERF_COUNT_HW_CACHE_ITLB = 4, + PERF_COUNT_HW_CACHE_BPU = 5, + + PERF_COUNT_HW_CACHE_MAX, /* non-ABI */ +}; + +enum perf_hw_cache_op_id { + PERF_COUNT_HW_CACHE_OP_READ = 0, + PERF_COUNT_HW_CACHE_OP_WRITE = 1, + PERF_COUNT_HW_CACHE_OP_PREFETCH = 2, + + PERF_COUNT_HW_CACHE_OP_MAX, /* non-ABI */ +}; + +enum perf_hw_cache_op_result_id { + PERF_COUNT_HW_CACHE_RESULT_ACCESS = 0, + PERF_COUNT_HW_CACHE_RESULT_MISS = 1, + + PERF_COUNT_HW_CACHE_RESULT_MAX, /* non-ABI */ +}; + +/* + * Special "software" counters provided by the kernel, even if the hardware + * does not support performance counters. These counters measure various + * physical and sw events of the kernel (and allow the profiling of them as + * well): + */ +enum perf_sw_ids { + PERF_COUNT_SW_CPU_CLOCK = 0, + PERF_COUNT_SW_TASK_CLOCK = 1, + PERF_COUNT_SW_PAGE_FAULTS = 2, + PERF_COUNT_SW_CONTEXT_SWITCHES = 3, + PERF_COUNT_SW_CPU_MIGRATIONS = 4, + PERF_COUNT_SW_PAGE_FAULTS_MIN = 5, + PERF_COUNT_SW_PAGE_FAULTS_MAJ = 6, + + PERF_COUNT_SW_MAX, /* non-ABI */ +}; + +/* + * Bits that can be set in attr.sample_type to request information + * in the overflow packets. + */ +enum perf_counter_sample_format { + PERF_SAMPLE_IP = 1U << 0, + PERF_SAMPLE_TID = 1U << 1, + PERF_SAMPLE_TIME = 1U << 2, + PERF_SAMPLE_ADDR = 1U << 3, + PERF_SAMPLE_READ = 1U << 4, + PERF_SAMPLE_CALLCHAIN = 1U << 5, + PERF_SAMPLE_ID = 1U << 6, + PERF_SAMPLE_CPU = 1U << 7, + PERF_SAMPLE_PERIOD = 1U << 8, + PERF_SAMPLE_STREAM_ID = 1U << 9, + PERF_SAMPLE_RAW = 1U << 10, + + PERF_SAMPLE_MAX = 1U << 11, /* non-ABI */ +}; + +/* + * The format of the data returned by read() on a perf counter fd, + * as specified by attr.read_format: + * + * struct read_format { + * { u64 value; + * { u64 time_enabled; } && PERF_FORMAT_ENABLED + * { u64 time_running; } && PERF_FORMAT_RUNNING + * { u64 id; } && PERF_FORMAT_ID + * } && !PERF_FORMAT_GROUP + * + * { u64 nr; + * { u64 time_enabled; } && PERF_FORMAT_ENABLED + * { u64 time_running; } && PERF_FORMAT_RUNNING + * { u64 value; + * { u64 id; } && PERF_FORMAT_ID + * } cntr[nr]; + * } && PERF_FORMAT_GROUP + * }; + */ +enum perf_counter_read_format { + PERF_FORMAT_TOTAL_TIME_ENABLED = 1U << 0, + PERF_FORMAT_TOTAL_TIME_RUNNING = 1U << 1, + PERF_FORMAT_ID = 1U << 2, + PERF_FORMAT_GROUP = 1U << 3, + + PERF_FORMAT_MAX = 1U << 4, /* non-ABI */ +}; + +#define PERF_ATTR_SIZE_VER0 64 /* sizeof first published struct */ + +/* + * Hardware event to monitor via a performance monitoring counter: + */ +struct perf_counter_attr { + + /* + * Major type: hardware/software/tracepoint/etc. + */ + __u32 type; + + /* + * Size of the attr structure, for fwd/bwd compat. + */ + __u32 size; + + /* + * Type specific configuration information. + */ + __u64 config; + + union { + __u64 sample_period; + __u64 sample_freq; + }; + + __u64 sample_type; + __u64 read_format; + + __u64 disabled : 1, /* off by default */ + inherit : 1, /* children inherit it */ + pinned : 1, /* must always be on PMU */ + exclusive : 1, /* only group on PMU */ + exclude_user : 1, /* don't count user */ + exclude_kernel : 1, /* ditto kernel */ + exclude_hv : 1, /* ditto hypervisor */ + exclude_idle : 1, /* don't count when idle */ + mmap : 1, /* include mmap data */ + comm : 1, /* include comm data */ + freq : 1, /* use freq, not period */ + inherit_stat : 1, /* per task counts */ + enable_on_exec : 1, /* next exec enables */ + task : 1, /* trace fork/exit */ + watermark : 1, /* wakeup_watermark */ + + __reserved_1 : 49; + + union { + __u32 wakeup_events; /* wakeup every n events */ + __u32 wakeup_watermark; /* bytes before wakeup */ + }; + __u32 __reserved_2; + + __u64 __reserved_3; +}; + +/* + * Ioctls that can be done on a perf counter fd: + */ +#define PERF_COUNTER_IOC_ENABLE _IO ('$', 0) +#define PERF_COUNTER_IOC_DISABLE _IO ('$', 1) +#define PERF_COUNTER_IOC_REFRESH _IO ('$', 2) +#define PERF_COUNTER_IOC_RESET _IO ('$', 3) +#define PERF_COUNTER_IOC_PERIOD _IOW('$', 4, u64) +#define PERF_COUNTER_IOC_SET_OUTPUT _IO ('$', 5) + +enum perf_counter_ioc_flags { + PERF_IOC_FLAG_GROUP = 1U << 0, +}; + +/* + * Structure of the page that can be mapped via mmap + */ +struct perf_counter_mmap_page { + __u32 version; /* version number of this structure */ + __u32 compat_version; /* lowest version this is compat with */ + + /* + * Bits needed to read the hw counters in user-space. + * + * u32 seq; + * s64 count; + * + * do { + * seq = pc->lock; + * + * barrier() + * if (pc->index) { + * count = pmc_read(pc->index - 1); + * count += pc->offset; + * } else + * goto regular_read; + * + * barrier(); + * } while (pc->lock != seq); + * + * NOTE: for obvious reason this only works on self-monitoring + * processes. + */ + __u32 lock; /* seqlock for synchronization */ + __u32 index; /* hardware counter identifier */ + __s64 offset; /* add to hardware counter value */ + __u64 time_enabled; /* time counter active */ + __u64 time_running; /* time counter on cpu */ + + /* + * Hole for extension of the self monitor capabilities + */ + + __u64 __reserved[123]; /* align to 1k */ + + /* + * Control data for the mmap() data buffer. + * + * User-space reading the @data_head value should issue an rmb(), on + * SMP capable platforms, after reading this value -- see + * perf_counter_wakeup(). + * + * When the mapping is PROT_WRITE the @data_tail value should be + * written by userspace to reflect the last read data. In this case + * the kernel will not over-write unread data. + */ + __u64 data_head; /* head in the data section */ + __u64 data_tail; /* user-space written tail */ +}; + +#define PERF_EVENT_MISC_CPUMODE_MASK (3 << 0) +#define PERF_EVENT_MISC_CPUMODE_UNKNOWN (0 << 0) +#define PERF_EVENT_MISC_KERNEL (1 << 0) +#define PERF_EVENT_MISC_USER (2 << 0) +#define PERF_EVENT_MISC_HYPERVISOR (3 << 0) + +struct perf_event_header { + __u32 type; + __u16 misc; + __u16 size; +}; + +enum perf_event_type { + + /* + * The MMAP events record the PROT_EXEC mappings so that we can + * correlate userspace IPs to code. They have the following structure: + * + * struct { + * struct perf_event_header header; + * + * u32 pid, tid; + * u64 addr; + * u64 len; + * u64 pgoff; + * char filename[]; + * }; + */ + PERF_EVENT_MMAP = 1, + + /* + * struct { + * struct perf_event_header header; + * u64 id; + * u64 lost; + * }; + */ + PERF_EVENT_LOST = 2, + + /* + * struct { + * struct perf_event_header header; + * + * u32 pid, tid; + * char comm[]; + * }; + */ + PERF_EVENT_COMM = 3, + + /* + * struct { + * struct perf_event_header header; + * u32 pid, ppid; + * u32 tid, ptid; + * u64 time; + * }; + */ + PERF_EVENT_EXIT = 4, + + /* + * struct { + * struct perf_event_header header; + * u64 time; + * u64 id; + * u64 stream_id; + * }; + */ + PERF_EVENT_THROTTLE = 5, + PERF_EVENT_UNTHROTTLE = 6, + + /* + * struct { + * struct perf_event_header header; + * u32 pid, ppid; + * u32 tid, ptid; + * { u64 time; } && PERF_SAMPLE_TIME + * }; + */ + PERF_EVENT_FORK = 7, + + /* + * struct { + * struct perf_event_header header; + * u32 pid, tid; + * + * struct read_format values; + * }; + */ + PERF_EVENT_READ = 8, + + /* + * struct { + * struct perf_event_header header; + * + * { u64 ip; } && PERF_SAMPLE_IP + * { u32 pid, tid; } && PERF_SAMPLE_TID + * { u64 time; } && PERF_SAMPLE_TIME + * { u64 addr; } && PERF_SAMPLE_ADDR + * { u64 id; } && PERF_SAMPLE_ID + * { u64 stream_id;} && PERF_SAMPLE_STREAM_ID + * { u32 cpu, res; } && PERF_SAMPLE_CPU + * { u64 period; } && PERF_SAMPLE_PERIOD + * + * { struct read_format values; } && PERF_SAMPLE_READ + * + * { u64 nr, + * u64 ips[nr]; } && PERF_SAMPLE_CALLCHAIN + * + * # + * # The RAW record below is opaque data wrt the ABI + * # + * # That is, the ABI doesn't make any promises wrt to + * # the stability of its content, it may vary depending + * # on event, hardware, kernel version and phase of + * # the moon. + * # + * # In other words, PERF_SAMPLE_RAW contents are not an ABI. + * # + * + * { u32 size; + * char data[size];}&& PERF_SAMPLE_RAW + * }; + */ + PERF_EVENT_SAMPLE = 9, + + PERF_EVENT_MAX, /* non-ABI */ +}; + +enum perf_callchain_context { + PERF_CONTEXT_HV = (__u64)-32, + PERF_CONTEXT_KERNEL = (__u64)-128, + PERF_CONTEXT_USER = (__u64)-512, + + PERF_CONTEXT_GUEST = (__u64)-2048, + PERF_CONTEXT_GUEST_KERNEL = (__u64)-2176, + PERF_CONTEXT_GUEST_USER = (__u64)-2560, + + PERF_CONTEXT_MAX = (__u64)-4095, +}; + +#define PERF_FLAG_FD_NO_GROUP (1U << 0) +#define PERF_FLAG_FD_OUTPUT (1U << 1) + +/* + * In case some app still references the old symbols: + */ + +#define __NR_perf_counter_open __NR_perf_event_open + +#define PR_TASK_PERF_COUNTERS_DISABLE PR_TASK_PERF_EVENTS_DISABLE +#define PR_TASK_PERF_COUNTERS_ENABLE PR_TASK_PERF_EVENTS_ENABLE + +#endif /* _LINUX_PERF_COUNTER_H */ diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index ae9d9ed6df2a..acefaf71e6dd 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -1,15 +1,15 @@ /* - * Performance events: + * Performance events: * * Copyright (C) 2008-2009, Thomas Gleixner * Copyright (C) 2008-2009, Red Hat, Inc., Ingo Molnar * Copyright (C) 2008-2009, Red Hat, Inc., Peter Zijlstra * - * Data type definitions, declarations, prototypes. + * Data type definitions, declarations, prototypes. * * Started by: Thomas Gleixner and Ingo Molnar * - * For licencing details see kernel-base/COPYING + * For licencing details see kernel-base/COPYING */ #ifndef _LINUX_PERF_EVENT_H #define _LINUX_PERF_EVENT_H @@ -131,19 +131,19 @@ enum perf_event_sample_format { * as specified by attr.read_format: * * struct read_format { - * { u64 value; - * { u64 time_enabled; } && PERF_FORMAT_ENABLED - * { u64 time_running; } && PERF_FORMAT_RUNNING - * { u64 id; } && PERF_FORMAT_ID - * } && !PERF_FORMAT_GROUP + * { u64 value; + * { u64 time_enabled; } && PERF_FORMAT_ENABLED + * { u64 time_running; } && PERF_FORMAT_RUNNING + * { u64 id; } && PERF_FORMAT_ID + * } && !PERF_FORMAT_GROUP * - * { u64 nr; - * { u64 time_enabled; } && PERF_FORMAT_ENABLED - * { u64 time_running; } && PERF_FORMAT_RUNNING - * { u64 value; - * { u64 id; } && PERF_FORMAT_ID - * } cntr[nr]; - * } && PERF_FORMAT_GROUP + * { u64 nr; + * { u64 time_enabled; } && PERF_FORMAT_ENABLED + * { u64 time_running; } && PERF_FORMAT_RUNNING + * { u64 value; + * { u64 id; } && PERF_FORMAT_ID + * } cntr[nr]; + * } && PERF_FORMAT_GROUP * }; */ enum perf_event_read_format { @@ -152,7 +152,7 @@ enum perf_event_read_format { PERF_FORMAT_ID = 1U << 2, PERF_FORMAT_GROUP = 1U << 3, - PERF_FORMAT_MAX = 1U << 4, /* non-ABI */ + PERF_FORMAT_MAX = 1U << 4, /* non-ABI */ }; #define PERF_ATTR_SIZE_VER0 64 /* sizeof first published struct */ @@ -216,8 +216,8 @@ struct perf_event_attr { * Ioctls that can be done on a perf event fd: */ #define PERF_EVENT_IOC_ENABLE _IO ('$', 0) -#define PERF_EVENT_IOC_DISABLE _IO ('$', 1) -#define PERF_EVENT_IOC_REFRESH _IO ('$', 2) +#define PERF_EVENT_IOC_DISABLE _IO ('$', 1) +#define PERF_EVENT_IOC_REFRESH _IO ('$', 2) #define PERF_EVENT_IOC_RESET _IO ('$', 3) #define PERF_EVENT_IOC_PERIOD _IOW('$', 4, u64) #define PERF_EVENT_IOC_SET_OUTPUT _IO ('$', 5) @@ -314,9 +314,9 @@ enum perf_event_type { /* * struct { - * struct perf_event_header header; - * u64 id; - * u64 lost; + * struct perf_event_header header; + * u64 id; + * u64 lost; * }; */ PERF_RECORD_LOST = 2, @@ -383,23 +383,23 @@ enum perf_event_type { * { u64 id; } && PERF_SAMPLE_ID * { u64 stream_id;} && PERF_SAMPLE_STREAM_ID * { u32 cpu, res; } && PERF_SAMPLE_CPU - * { u64 period; } && PERF_SAMPLE_PERIOD + * { u64 period; } && PERF_SAMPLE_PERIOD * * { struct read_format values; } && PERF_SAMPLE_READ * * { u64 nr, * u64 ips[nr]; } && PERF_SAMPLE_CALLCHAIN * - * # - * # The RAW record below is opaque data wrt the ABI - * # - * # That is, the ABI doesn't make any promises wrt to - * # the stability of its content, it may vary depending - * # on event_id, hardware, kernel version and phase of - * # the moon. - * # - * # In other words, PERF_SAMPLE_RAW contents are not an ABI. - * # + * # + * # The RAW record below is opaque data wrt the ABI + * # + * # That is, the ABI doesn't make any promises wrt to + * # the stability of its content, it may vary depending + * # on event, hardware, kernel version and phase of + * # the moon. + * # + * # In other words, PERF_SAMPLE_RAW contents are not an ABI. + * # * * { u32 size; * char data[size];}&& PERF_SAMPLE_RAW @@ -503,10 +503,10 @@ struct pmu { * enum perf_event_active_state - the states of a event */ enum perf_event_active_state { - PERF_EVENT_STATE_ERROR = -2, + PERF_EVENT_STATE_ERROR = -2, PERF_EVENT_STATE_OFF = -1, PERF_EVENT_STATE_INACTIVE = 0, - PERF_EVENT_STATE_ACTIVE = 1, + PERF_EVENT_STATE_ACTIVE = 1, }; struct file; @@ -529,7 +529,7 @@ struct perf_mmap_data { long watermark; /* wakeup watermark */ - struct perf_event_mmap_page *user_page; + struct perf_event_mmap_page *user_page; void *data_pages[0]; }; @@ -694,14 +694,14 @@ struct perf_cpu_context { }; struct perf_output_handle { - struct perf_event *event; - struct perf_mmap_data *data; - unsigned long head; - unsigned long offset; - int nmi; - int sample; - int locked; - unsigned long flags; + struct perf_event *event; + struct perf_mmap_data *data; + unsigned long head; + unsigned long offset; + int nmi; + int sample; + int locked; + unsigned long flags; }; #ifdef CONFIG_PERF_EVENTS @@ -829,22 +829,22 @@ static inline void perf_event_task_sched_out(struct task_struct *task, struct task_struct *next, int cpu) { } static inline void -perf_event_task_tick(struct task_struct *task, int cpu) { } +perf_event_task_tick(struct task_struct *task, int cpu) { } static inline int perf_event_init_task(struct task_struct *child) { return 0; } static inline void perf_event_exit_task(struct task_struct *child) { } static inline void perf_event_free_task(struct task_struct *task) { } -static inline void perf_event_do_pending(void) { } -static inline void perf_event_print_debug(void) { } +static inline void perf_event_do_pending(void) { } +static inline void perf_event_print_debug(void) { } static inline void perf_disable(void) { } static inline void perf_enable(void) { } -static inline int perf_event_task_disable(void) { return -EINVAL; } -static inline int perf_event_task_enable(void) { return -EINVAL; } +static inline int perf_event_task_disable(void) { return -EINVAL; } +static inline int perf_event_task_enable(void) { return -EINVAL; } static inline void perf_sw_event(u32 event_id, u64 nr, int nmi, struct pt_regs *regs, u64 addr) { } -static inline void perf_event_mmap(struct vm_area_struct *vma) { } +static inline void perf_event_mmap(struct vm_area_struct *vma) { } static inline void perf_event_comm(struct task_struct *tsk) { } static inline void perf_event_fork(struct task_struct *tsk) { } static inline void perf_event_init(void) { } -- cgit v1.2.3 From bcf56442429a15bdd6e1d81a9d4c89f93a44fdf7 Mon Sep 17 00:00:00 2001 From: GeunSik Lim Date: Tue, 16 Jun 2009 10:26:25 +0200 Subject: trivial: change address of the libcap source. This is patch to change ftp site of the libcap source. "ftp://linux.kernel.org" address does not exist. Signed-off-by: GeunSik Lim Signed-off-by: Jiri Kosina --- include/linux/capability.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/capability.h b/include/linux/capability.h index c3021105edc0..c8f2a5f70ed5 100644 --- a/include/linux/capability.h +++ b/include/linux/capability.h @@ -7,7 +7,7 @@ * * See here for the libcap library ("POSIX draft" compliance): * - * ftp://linux.kernel.org/pub/linux/libs/security/linux-privs/kernel-2.6/ + * ftp://www.kernel.org/pub/linux/libs/security/linux-privs/kernel-2.6/ */ #ifndef _LINUX_CAPABILITY_H -- cgit v1.2.3 From 47a0dfaad9eb82b16193477cf99c2462af03c329 Mon Sep 17 00:00:00 2001 From: Ori Avtalion Date: Tue, 16 Jun 2009 12:17:53 +0300 Subject: trivial: fix typo in namei.h comment Signed-off-by: Ori Avtalion Signed-off-by: Jiri Kosina --- include/linux/namei.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/namei.h b/include/linux/namei.h index d870ae2faedc..ec0f607b364a 100644 --- a/include/linux/namei.h +++ b/include/linux/namei.h @@ -40,7 +40,7 @@ enum {LAST_NORM, LAST_ROOT, LAST_DOT, LAST_DOTDOT, LAST_BIND}; * - follow links at the end * - require a directory * - ending slashes ok even for nonexistent files - * - internal "there are more path compnents" flag + * - internal "there are more path components" flag * - locked when lookup done with dcache_lock held * - dentry cache is untrusted; force a real lookup */ -- cgit v1.2.3 From b9049df5a0e7f35456c06b949b08b898b9c2e7bc Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev Date: Tue, 23 Jun 2009 12:09:29 +0200 Subject: Change "useing" -> "using". Signed-off-by: Dmitri Vorobiev Signed-off-by: Jiri Kosina --- include/linux/workqueue.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h index 6273fa97b527..7ef0c7b94f31 100644 --- a/include/linux/workqueue.h +++ b/include/linux/workqueue.h @@ -94,7 +94,7 @@ struct execute_work { /* * initialize all of a work item in one go * - * NOTE! No point in using "atomic_long_set()": useing a direct + * NOTE! No point in using "atomic_long_set()": using a direct * assignment of the work data initializer allows the compiler * to generate better code. */ -- cgit v1.2.3 From 411c94038594b2a3fd123d09bdec3fe2500e383d Mon Sep 17 00:00:00 2001 From: Anand Gadiyar Date: Tue, 7 Jul 2009 15:24:23 +0530 Subject: trivial: fix typo "for for" in multiple files trivial: fix typo "for for" in multiple files Signed-off-by: Anand Gadiyar Signed-off-by: Jiri Kosina --- include/linux/usb.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/usb.h b/include/linux/usb.h index a8fe05f224e5..19fabc487beb 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -1071,7 +1071,7 @@ typedef void (*usb_complete_t)(struct urb *); * @start_frame: Returns the initial frame for isochronous transfers. * @number_of_packets: Lists the number of ISO transfer buffers. * @interval: Specifies the polling interval for interrupt or isochronous - * transfers. The units are frames (milliseconds) for for full and low + * transfers. The units are frames (milliseconds) for full and low * speed devices, and microframes (1/8 millisecond) for highspeed ones. * @error_count: Returns the number of ISO transfers that reported errors. * @context: For use in completion functions. This normally points to -- cgit v1.2.3 From 3dbda77e6f3375f87090cfce97b2551d3723521b Mon Sep 17 00:00:00 2001 From: Uwe Kleine-Koenig Date: Thu, 23 Jul 2009 08:31:31 +0200 Subject: trivial: fix typos "man[ae]g?ment" -> "management" Signed-off-by: Uwe Kleine-Koenig Signed-off-by: Jiri Kosina --- include/linux/mISDNif.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mISDNif.h b/include/linux/mISDNif.h index 536ca12442ca..78c3bed1c3f5 100644 --- a/include/linux/mISDNif.h +++ b/include/linux/mISDNif.h @@ -104,7 +104,7 @@ #define DL_UNITDATA_IND 0x3108 #define DL_INFORMATION_IND 0x0008 -/* intern layer 2 managment */ +/* intern layer 2 management */ #define MDL_ASSIGN_REQ 0x1804 #define MDL_ASSIGN_IND 0x1904 #define MDL_REMOVE_REQ 0x1A04 -- cgit v1.2.3 From 325253a6b2de4bdfa9ef0e28b5df8a4a4fe2b677 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Tue, 14 Jul 2009 17:06:02 +0100 Subject: backlight: Allow drivers to update the core, and generate events on changes Certain hardware will send us events when the backlight brightness changes. Add a function to update the value in the core, and additionally send a uevent so that userspace can pop up appropriate UI. The uevents are flagged depending on whether the update originated in the kernel or from userspace, making it easier to only display UI at the appropriate time. Signed-off-by: Matthew Garrett Signed-off-by: Richard Purdie --- include/linux/backlight.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/backlight.h b/include/linux/backlight.h index 79ca2da81c87..0f5f57858a23 100644 --- a/include/linux/backlight.h +++ b/include/linux/backlight.h @@ -27,6 +27,11 @@ * Any other use of the locks below is probably wrong. */ +enum backlight_update_reason { + BACKLIGHT_UPDATE_HOTKEY, + BACKLIGHT_UPDATE_SYSFS, +}; + struct backlight_device; struct fb_info; @@ -100,6 +105,8 @@ static inline void backlight_update_status(struct backlight_device *bd) extern struct backlight_device *backlight_device_register(const char *name, struct device *dev, void *devdata, struct backlight_ops *ops); extern void backlight_device_unregister(struct backlight_device *bd); +extern void backlight_force_update(struct backlight_device *bd, + enum backlight_update_reason reason); #define to_backlight_device(obj) container_of(obj, struct backlight_device, dev) -- cgit v1.2.3 From 181f7c5dd3832763bdf2756b6d2d8a49bdf12791 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 6 Jul 2009 11:53:03 +0200 Subject: kmemcheck: add missing braces to do-while in kmemcheck_annotate_bitfield Whether or not the sparse warning warning: do-while statement is not a compound statement is justified or not in this case, it is annoying and trivial to fix. [vegard.nossum@gmail.com: title and cleanup] Signed-off-by: Johannes Berg Signed-off-by: Vegard Nossum --- include/linux/kmemcheck.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/kmemcheck.h b/include/linux/kmemcheck.h index 47b39b7c7e84..06c6c5501f13 100644 --- a/include/linux/kmemcheck.h +++ b/include/linux/kmemcheck.h @@ -137,7 +137,10 @@ static inline void kmemcheck_mark_initialized_pages(struct page *p, int name##_end[0]; #define kmemcheck_annotate_bitfield(ptr, name) \ - do if (ptr) { \ + do { \ + if (!ptr) \ + break; \ + \ int _n = (long) &((ptr)->name##_end) \ - (long) &((ptr)->name##_begin); \ BUILD_BUG_ON(_n < 0); \ -- cgit v1.2.3 From 40f9244f4da8976eeb6d5ed6313c635ba238a9d3 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 17 Jun 2009 17:56:39 +0100 Subject: regulator: Allow consumer supplies to be set up with dev_name() Follow the approach suggested by Russell King and implemented by him in the clkdev API and allow consumer device supply mapings to be set up using the dev_name() for the consumer instead of the struct device. In order to avoid making existing machines instabuggy and creating merge issues the use of struct device is still supported for the time being. This resolves problems working with buses such as I2C which make the struct device available late providing that the final device name is known, which is the case for most embedded systems with fixed setups. Consumers must still use the struct device when calling regulator_get(). Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/machine.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index bac64fa390f2..9328090eca20 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -126,13 +126,18 @@ struct regulation_constraints { /** * struct regulator_consumer_supply - supply -> device mapping * - * This maps a supply name to a device. + * This maps a supply name to a device. Only one of dev or dev_name + * can be specified. Use of dev_name allows support for buses which + * make struct device available late such as I2C and is the preferred + * form. * * @dev: Device structure for the consumer. + * @dev_name: Result of dev_name() for the consumer. * @supply: Name for the supply. */ struct regulator_consumer_supply { struct device *dev; /* consumer */ + const char *dev_name; /* dev_name() for consumer */ const char *supply; /* consumer supply - e.g. "vcc" */ }; -- cgit v1.2.3 From 9c19bc0444490e76197f47316c649590dc6f10a4 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 9 Jul 2009 15:44:31 +0100 Subject: regulator: Define full constraints function with REGULATOR disabled This allows machine drivers to build without ifdefs if they have full constraints. Suggested by machine drivers contributed by Haojian Zhuang . Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/machine.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 9328090eca20..73a88f6cbb1c 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -171,6 +171,12 @@ struct regulator_init_data { int regulator_suspend_prepare(suspend_state_t state); +#ifdef CONFIG_REGULATOR void regulator_has_full_constraints(void); +#else +static inline void regulator_has_full_constraints(void) +{ +} +#endif #endif -- cgit v1.2.3 From 0198d1163b3e0313b3f073b62384abfab1a17cff Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Fri, 26 Jun 2009 19:20:59 +0800 Subject: regulator: add buck3 in da903x driver BUCK3 is the new component in DA9035. So there're three BUCKs in DA9035. And there're two BUCKs in DA9034. Signed-off-by: Haojian Zhuang Acked-by: Mark Brown Acked-by: Eric Miao Signed-off-by: Liam Girdwood --- include/linux/mfd/da903x.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mfd/da903x.h b/include/linux/mfd/da903x.h index 115dbe965082..c63b65c94429 100644 --- a/include/linux/mfd/da903x.h +++ b/include/linux/mfd/da903x.h @@ -1,7 +1,7 @@ #ifndef __LINUX_PMIC_DA903X_H #define __LINUX_PMIC_DA903X_H -/* Unified sub device IDs for DA9030/DA9034 */ +/* Unified sub device IDs for DA9030/DA9034/DA9035 */ enum { DA9030_ID_LED_1, DA9030_ID_LED_2, @@ -57,6 +57,8 @@ enum { DA9034_ID_LDO13, DA9034_ID_LDO14, DA9034_ID_LDO15, + + DA9035_ID_BUCK3, }; /* -- cgit v1.2.3 From ed6543243a1c557dbe2005a86f6d8e851c1ebb79 Mon Sep 17 00:00:00 2001 From: roald Date: Mon, 13 Jul 2009 17:25:21 +0800 Subject: regulator: add initialization macro of regulator supply Signed-off-by: Haojian Zhuang Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/machine.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 73a88f6cbb1c..99a4e2eb36aa 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -141,6 +141,13 @@ struct regulator_consumer_supply { const char *supply; /* consumer supply - e.g. "vcc" */ }; +/* Initialize struct regulator_consumer_supply */ +#define REGULATOR_SUPPLY(_name, _dev_name) \ +{ \ + .supply = _name, \ + .dev_name = _dev_name, \ +} + /** * struct regulator_init_data - regulator platform initialisation data. * -- cgit v1.2.3 From 5ffbd136e6c51c8d1eec7a4a0c5d2180c81aea30 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 21 Jul 2009 16:00:23 +0100 Subject: regulator: Add regulator_get_exclusive() API Some consumers require complete control of the regulator and can't tolerate sharing it with other consumers, most commonly because they need to have the regulator actually disabled so can't have other consumers forcing it on. This new regulator_get_exclusive() API call allows these consumers to explicitly request this, documenting the assumptions that they are making. In order to simplify coding of such consumers the use count for regulators they request is forced to match the enabled state of the regulator when it is requested. This is not possible for consumers which can share regulators due to the need to keep track of the ownership of use counts. A new API call is used rather than an additional argument to the existing regulator_get() in order to avoid merge headaches with driver code in other trees. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/consumer.h | 2 ++ include/linux/regulator/driver.h | 2 ++ 2 files changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index 277f4b964df5..976b57b6912c 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -125,6 +125,8 @@ struct regulator_bulk_data { /* regulator get and put */ struct regulator *__must_check regulator_get(struct device *dev, const char *id); +struct regulator *__must_check regulator_get_exclusive(struct device *dev, + const char *id); void regulator_put(struct regulator *regulator); /* regulator output control and status */ diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index ce1be708ca16..73c9cd6cda7d 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -162,6 +162,8 @@ struct regulator_desc { struct regulator_dev { struct regulator_desc *desc; int use_count; + int open_count; + int exclusive; /* lists we belong to */ struct list_head list; /* list of all regulators */ -- cgit v1.2.3 From a7a1ad9066e0266c8a4357ba3dbaeebfb80f531d Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 21 Jul 2009 16:00:24 +0100 Subject: regulator: Add regulator voltage range check API Simplify checking of support for voltage ranges by providing an API which wraps the existing count and list operations. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/consumer.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index 976b57b6912c..490c5b37b6d7 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -146,6 +146,8 @@ void regulator_bulk_free(int num_consumers, int regulator_count_voltages(struct regulator *regulator); int regulator_list_voltage(struct regulator *regulator, unsigned selector); +int regulator_is_supported_voltage(struct regulator *regulator, + int min_uV, int max_uV); int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV); int regulator_get_voltage(struct regulator *regulator); int regulator_set_current_limit(struct regulator *regulator, -- cgit v1.2.3 From 86d9884b6a3646bc24e57430f1f694c5171c1bf6 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Thu, 6 Aug 2009 19:37:29 +0300 Subject: regulator: Add GPIO enable control to fixed voltage regulator driver Now fixed regulators that have their enable pin connected to a GPIO line can use the fixed regulator driver for regulator enable/disable control. The GPIO number and polarity information is passed through platform data. GPIO enable control is achieved using gpiolib. Signed-off-by: Roger Quadros Reviewed-by: Philipp Zabel Reviewed-by: Felipe Balbi Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/fixed.h | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h index 91b4da31f1b5..e94a4a1c7c8a 100644 --- a/include/linux/regulator/fixed.h +++ b/include/linux/regulator/fixed.h @@ -5,6 +5,9 @@ * * Author: Mark Brown * + * Copyright (c) 2009 Nokia Corporation + * Roger Quadros + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the @@ -16,9 +19,30 @@ struct regulator_init_data; +/** + * struct fixed_voltage_config - fixed_voltage_config structure + * @supply_name: Name of the regulator supply + * @microvolts: Output voltage of regulator + * @gpio: GPIO to use for enable control + * set to -EINVAL if not used + * @enable_high: Polarity of enable GPIO + * 1 = Active high, 0 = Active low + * @enabled_at_boot: Whether regulator has been enabled at + * boot or not. 1 = Yes, 0 = No + * This is used to keep the regulator at + * the default state + * @init_data: regulator_init_data + * + * This structure contains fixed voltage regulator configuration + * information that must be passed by platform code to the fixed + * voltage regulator driver. + */ struct fixed_voltage_config { const char *supply_name; int microvolts; + int gpio; + unsigned enable_high:1; + unsigned enabled_at_boot:1; struct regulator_init_data *init_data; }; -- cgit v1.2.3 From 2e7e65ce55566fc81036960b00e5e15f5d9578ea Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 18 Sep 2009 22:44:43 +0200 Subject: regulator: fix typos Fix a couple of typos I found while working with this subsystem. Signed-off-by: Wolfram Sang Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/machine.h | 6 +++--- include/linux/regulator/max1586.h | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 99a4e2eb36aa..87f5f176d4ef 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -41,7 +41,7 @@ struct regulator; #define REGULATOR_CHANGE_DRMS 0x10 /** - * struct regulator_state - regulator state during low power syatem states + * struct regulator_state - regulator state during low power system states * * This describes a regulators state during a system wide low power state. * @@ -117,10 +117,10 @@ struct regulation_constraints { /* mode to set on startup */ unsigned int initial_mode; - /* constriant flags */ + /* constraint flags */ unsigned always_on:1; /* regulator never off when system is on */ unsigned boot_on:1; /* bootloader/firmware enabled regulator */ - unsigned apply_uV:1; /* apply uV constraint iff min == max */ + unsigned apply_uV:1; /* apply uV constraint if min == max */ }; /** diff --git a/include/linux/regulator/max1586.h b/include/linux/regulator/max1586.h index 44563192bf16..de9a7fae20be 100644 --- a/include/linux/regulator/max1586.h +++ b/include/linux/regulator/max1586.h @@ -36,7 +36,7 @@ * max1586_subdev_data - regulator data * @id: regulator Id (either MAX1586_V3 or MAX1586_V6) * @name: regulator cute name (example for V3: "vcc_core") - * @platform_data: regulator init data (contraints, supplies, ...) + * @platform_data: regulator init data (constraints, supplies, ...) */ struct max1586_subdev_data { int id; @@ -46,7 +46,7 @@ struct max1586_subdev_data { /** * max1586_platform_data - platform data for max1586 - * @num_subdevs: number of regultors used (may be 1 or 2) + * @num_subdevs: number of regulators used (may be 1 or 2) * @subdevs: regulator used * At most, there will be a regulator for V3 and one for V6 voltages. * @v3_gain: gain on the V3 voltage output multiplied by 1e6. -- cgit v1.2.3 From d87b969d15a084503870da598c97278fb4877753 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 18 Sep 2009 22:44:46 +0200 Subject: regulator/driver: be more specific in nanodoc for is_enabled Document the possibility that is_enabled may also return with negative errorcodes. Signed-off-by: Wolfram Sang Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/driver.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 73c9cd6cda7d..31f2055eae28 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -37,7 +37,8 @@ enum regulator_status { * * @enable: Configure the regulator as enabled. * @disable: Configure the regulator as disabled. - * @is_enabled: Return 1 if the regulator is enabled, 0 otherwise. + * @is_enabled: Return 1 if the regulator is enabled, 0 if not. + * May also return negative errno. * * @set_voltage: Set the voltage for the regulator within the range specified. * The driver should select the voltage closest to min_uV. -- cgit v1.2.3 From a6f10a2f5d8c2738b3ac05974bdbea3b68a2aecd Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Tue, 22 Sep 2009 22:34:24 +1000 Subject: perf_event: Update PERF_EVENT_FORK header definition PERF_EVENT_FORK always outputs the time field, so update the header to reflect this. Signed-off-by: Anton Blanchard Cc: Arjan van de Ven Cc: Peter Zijlstra Cc: Paul Mackerras Cc: Frederic Weisbecker LKML-Reference: <20090922123424.GD19453@kryten> Signed-off-by: Ingo Molnar --- include/linux/perf_counter.h | 2 +- include/linux/perf_event.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h index 368bd70f1d2d..7b7fbf433cff 100644 --- a/include/linux/perf_counter.h +++ b/include/linux/perf_counter.h @@ -361,7 +361,7 @@ enum perf_event_type { * struct perf_event_header header; * u32 pid, ppid; * u32 tid, ptid; - * { u64 time; } && PERF_SAMPLE_TIME + * u64 time; * }; */ PERF_EVENT_FORK = 7, diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index acefaf71e6dd..3a9d36d1e92a 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -357,7 +357,7 @@ enum perf_event_type { * struct perf_event_header header; * u32 pid, ppid; * u32 tid, ptid; - * { u64 time; } && PERF_SAMPLE_TIME + * u64 time; * }; */ PERF_RECORD_FORK = 7, -- cgit v1.2.3 From 61e225dc341107be304fd1088146c2a5e88ff9e0 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Mon, 21 Sep 2009 17:01:08 -0700 Subject: const: make struct super_block::dq_op const Signed-off-by: Alexey Dobriyan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fs.h | 2 +- include/linux/quotaops.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 90162fb3bf04..83e1a0cea97a 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1318,7 +1318,7 @@ struct super_block { unsigned long long s_maxbytes; /* Max file size */ struct file_system_type *s_type; const struct super_operations *s_op; - struct dquot_operations *dq_op; + const struct dquot_operations *dq_op; struct quotactl_ops *s_qcop; const struct export_operations *s_export_op; unsigned long s_flags; diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h index 26361c4c037a..8dcbdb6e1019 100644 --- a/include/linux/quotaops.h +++ b/include/linux/quotaops.h @@ -135,7 +135,7 @@ static inline int sb_any_quota_active(struct super_block *sb) /* * Operations supported for diskquotas. */ -extern struct dquot_operations dquot_operations; +extern const struct dquot_operations dquot_operations; extern struct quotactl_ops vfs_quotactl_ops; #define sb_dquot_ops (&dquot_operations) -- cgit v1.2.3 From 0d54b217a247f39605361f867fefbb9e099a5432 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Mon, 21 Sep 2009 17:01:09 -0700 Subject: const: make struct super_block::s_qcop const Signed-off-by: Alexey Dobriyan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fs.h | 2 +- include/linux/quotaops.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 83e1a0cea97a..13c030ebfd28 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1319,7 +1319,7 @@ struct super_block { struct file_system_type *s_type; const struct super_operations *s_op; const struct dquot_operations *dq_op; - struct quotactl_ops *s_qcop; + const struct quotactl_ops *s_qcop; const struct export_operations *s_export_op; unsigned long s_flags; unsigned long s_magic; diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h index 8dcbdb6e1019..3ebb23153640 100644 --- a/include/linux/quotaops.h +++ b/include/linux/quotaops.h @@ -136,7 +136,7 @@ static inline int sb_any_quota_active(struct super_block *sb) * Operations supported for diskquotas. */ extern const struct dquot_operations dquot_operations; -extern struct quotactl_ops vfs_quotactl_ops; +extern const struct quotactl_ops vfs_quotactl_ops; #define sb_dquot_ops (&dquot_operations) #define sb_quotactl_ops (&vfs_quotactl_ops) -- cgit v1.2.3 From 6aed62853c72e29f2c97bbac7712cb398e8c9437 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Mon, 21 Sep 2009 17:01:11 -0700 Subject: const: make file_lock_operations const Signed-off-by: Alexey Dobriyan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 13c030ebfd28..6146dec21c35 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1066,7 +1066,7 @@ struct file_lock { struct fasync_struct * fl_fasync; /* for lease break notifications */ unsigned long fl_break_time; /* for nonblocking lease breaks */ - struct file_lock_operations *fl_ops; /* Callbacks for filesystems */ + const struct file_lock_operations *fl_ops; /* Callbacks for filesystems */ struct lock_manager_operations *fl_lmops; /* Callbacks for lockmanagers */ union { struct nfs_lock_info nfs_fl; -- cgit v1.2.3 From 7b021967c5e1463936042c8da72b550d3cabe9ac Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Mon, 21 Sep 2009 17:01:12 -0700 Subject: const: make lock_manager_operations const Signed-off-by: Alexey Dobriyan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fs.h | 2 +- include/linux/lockd/lockd.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 6146dec21c35..51803528b095 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1067,7 +1067,7 @@ struct file_lock { unsigned long fl_break_time; /* for nonblocking lease breaks */ const struct file_lock_operations *fl_ops; /* Callbacks for filesystems */ - struct lock_manager_operations *fl_lmops; /* Callbacks for lockmanagers */ + const struct lock_manager_operations *fl_lmops; /* Callbacks for lockmanagers */ union { struct nfs_lock_info nfs_fl; struct nfs4_lock_info nfs4_fl; diff --git a/include/linux/lockd/lockd.h b/include/linux/lockd/lockd.h index c325b187966b..ccf2e0dc077a 100644 --- a/include/linux/lockd/lockd.h +++ b/include/linux/lockd/lockd.h @@ -395,7 +395,7 @@ static inline int nlm_compare_locks(const struct file_lock *fl1, &&(fl1->fl_type == fl2->fl_type || fl2->fl_type == F_UNLCK); } -extern struct lock_manager_operations nlmsvc_lock_operations; +extern const struct lock_manager_operations nlmsvc_lock_operations; #endif /* __KERNEL__ */ -- cgit v1.2.3 From 83d5cde47dedf01b6a4a4331882cbc0a7eea3c2e Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Mon, 21 Sep 2009 17:01:13 -0700 Subject: const: make block_device_operations const Signed-off-by: Alexey Dobriyan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/genhd.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/genhd.h b/include/linux/genhd.h index 109d179adb93..297df45ffd0a 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -151,7 +151,7 @@ struct gendisk { struct disk_part_tbl *part_tbl; struct hd_struct part0; - struct block_device_operations *fops; + const struct block_device_operations *fops; struct request_queue *queue; void *private_data; -- cgit v1.2.3 From a5abeeacc44bbef2935a7a8e939264c28962def2 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Mon, 21 Sep 2009 17:01:13 -0700 Subject: mm: make swap token dummies static inlines Make use of the compiler's typechecking on !CONFIG_SWAP as well. [akpm@linux-foundation.org: build fix] Signed-off-by: Johannes Weiner Reviewed-by: Rik van Riel Cc: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/swap.h | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/swap.h b/include/linux/swap.h index 7c15334f3ff2..6c990e658f4e 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -419,10 +419,22 @@ static inline swp_entry_t get_swap_page(void) } /* linux/mm/thrash.c */ -#define put_swap_token(mm) do { } while (0) -#define grab_swap_token(mm) do { } while (0) -#define has_swap_token(mm) 0 -#define disable_swap_token() do { } while (0) +static inline void put_swap_token(struct mm_struct *mm) +{ +} + +static inline void grab_swap_token(struct mm_struct *mm) +{ +} + +static inline int has_swap_token(struct mm_struct *mm) +{ + return 0; +} + +static inline void disable_swap_token(void) +{ +} static inline void mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent) -- cgit v1.2.3 From 112067f0905b2de862c607ee62411cf47d2fe5c4 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Mon, 21 Sep 2009 17:01:16 -0700 Subject: memory hotplug: update zone pcp at memory online In my test, 128M memory is hot added, but zone's pcp batch is 0, which is an obvious error. When pages are onlined, zone pcp should be updated accordingly. [akpm@linux-foundation.org: fix warnings] Signed-off-by: Shaohua Li Cc: Mel Gorman Cc: Christoph Lameter Cc: Yakui Zhao Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mm.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index 9a72cc78e6b8..d3c8ae7c8015 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1058,6 +1058,8 @@ extern void setup_per_cpu_pageset(void); static inline void setup_per_cpu_pageset(void) {} #endif +extern void zone_pcp_update(struct zone *zone); + /* nommu.c */ extern atomic_long_t mmap_pages_allocated; -- cgit v1.2.3 From e8c5c8249878fb6564125680a1d15e06adbd5639 Mon Sep 17 00:00:00 2001 From: Lee Schermerhorn Date: Mon, 21 Sep 2009 17:01:22 -0700 Subject: hugetlb: balance freeing of huge pages across nodes Free huges pages from nodes in round robin fashion in an attempt to keep [persistent a.k.a static] hugepages balanced across nodes New function free_pool_huge_page() is modeled on and performs roughly the inverse of alloc_fresh_huge_page(). Replaces dequeue_huge_page() which now has no callers, so this patch removes it. Helper function hstate_next_node_to_free() uses new hstate member next_to_free_nid to distribute "frees" across all nodes with huge pages. Acked-by: David Rientjes Signed-off-by: Lee Schermerhorn Acked-by: Mel Gorman Cc: Nishanth Aravamudan Cc: Adam Litke Cc: Andy Whitcroft Cc: Eric Whitney Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/hugetlb.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h index 5cbc620bdfe0..16cdb75a543a 100644 --- a/include/linux/hugetlb.h +++ b/include/linux/hugetlb.h @@ -185,7 +185,8 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr, #define HSTATE_NAME_LEN 32 /* Defines one hugetlb page size */ struct hstate { - int hugetlb_next_nid; + int next_nid_to_alloc; + int next_nid_to_free; unsigned int order; unsigned long mask; unsigned long max_huge_pages; -- cgit v1.2.3 From c6a7f5728a1db45d30df55a01adc130b4ab0327c Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Mon, 21 Sep 2009 17:01:32 -0700 Subject: mm: oom analysis: Show kernel stack usage in /proc/meminfo and OOM log output The amount of memory allocated to kernel stacks can become significant and cause OOM conditions. However, we do not display the amount of memory consumed by stacks. Add code to display the amount of memory used for stacks in /proc/meminfo. Signed-off-by: KOSAKI Motohiro Reviewed-by: Christoph Lameter Reviewed-by: Minchan Kim Reviewed-by: Rik van Riel Cc: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmzone.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 889598537370..d9335b8de84a 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -94,10 +94,11 @@ enum zone_stat_item { NR_SLAB_RECLAIMABLE, NR_SLAB_UNRECLAIMABLE, NR_PAGETABLE, /* used for pagetables */ + NR_KERNEL_STACK, + /* Second 128 byte cacheline */ NR_UNSTABLE_NFS, /* NFS unstable pages */ NR_BOUNCE, NR_VMSCAN_WRITE, - /* Second 128 byte cacheline */ NR_WRITEBACK_TEMP, /* Writeback using temporary buffers */ #ifdef CONFIG_NUMA NUMA_HIT, /* allocated in intended node */ -- cgit v1.2.3 From 4b02108ac1b3354a22b0d83c684797692efdc395 Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Mon, 21 Sep 2009 17:01:33 -0700 Subject: mm: oom analysis: add shmem vmstat Recently we encountered OOM problems due to memory use of the GEM cache. Generally a large amuont of Shmem/Tmpfs pages tend to create a memory shortage problem. We often use the following calculation to determine the amount of shmem pages: shmem = NR_ACTIVE_ANON + NR_INACTIVE_ANON - NR_ANON_PAGES however the expression does not consider isolated and mlocked pages. This patch adds explicit accounting for pages used by shmem and tmpfs. Signed-off-by: KOSAKI Motohiro Acked-by: Rik van Riel Reviewed-by: Christoph Lameter Acked-by: Wu Fengguang Cc: David Rientjes Cc: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmzone.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index d9335b8de84a..b3583b93b77e 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -100,6 +100,7 @@ enum zone_stat_item { NR_BOUNCE, NR_VMSCAN_WRITE, NR_WRITEBACK_TEMP, /* Writeback using temporary buffers */ + NR_SHMEM, /* shmem pages (included tmpfs/GEM pages) */ #ifdef CONFIG_NUMA NUMA_HIT, /* allocated in intended node */ NUMA_MISS, /* allocated in non intended node */ -- cgit v1.2.3 From a731286de62294b63d8ceb3c5914ac52cc17e690 Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Mon, 21 Sep 2009 17:01:37 -0700 Subject: mm: vmstat: add isolate pages If the system is running a heavy load of processes then concurrent reclaim can isolate a large number of pages from the LRU. /proc/vmstat and the output generated for an OOM do not show how many pages were isolated. This has been observed during process fork bomb testing (mstctl11 in LTP). This patch shows the information about isolated pages. Reproduced via: ----------------------- % ./hackbench 140 process 1000 => OOM occur active_anon:146 inactive_anon:0 isolated_anon:49245 active_file:79 inactive_file:18 isolated_file:113 unevictable:0 dirty:0 writeback:0 unstable:0 buffer:39 free:370 slab_reclaimable:309 slab_unreclaimable:5492 mapped:53 shmem:15 pagetables:28140 bounce:0 Signed-off-by: KOSAKI Motohiro Acked-by: Rik van Riel Acked-by: Wu Fengguang Reviewed-by: Minchan Kim Cc: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmzone.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index b3583b93b77e..9c50309b30a1 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -100,6 +100,8 @@ enum zone_stat_item { NR_BOUNCE, NR_VMSCAN_WRITE, NR_WRITEBACK_TEMP, /* Writeback using temporary buffers */ + NR_ISOLATED_ANON, /* Temporary isolated pages from anon lru */ + NR_ISOLATED_FILE, /* Temporary isolated pages from file lru */ NR_SHMEM, /* shmem pages (included tmpfs/GEM pages) */ #ifdef CONFIG_NUMA NUMA_HIT, /* allocated in intended node */ -- cgit v1.2.3 From 5a2ae913f5229d6e1d4a666f0477350789d5128e Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Mon, 21 Sep 2009 17:01:39 -0700 Subject: mm: remove __{add,sub}_zone_page_state() __add_zone_page_state() and __sub_zone_page_state() are unused. Signed-off-by: KOSAKI Motohiro Cc: Wu Fengguang Cc: Rik van Riel Cc: Minchan Kim Cc: Christoph Lameter Cc: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/vmstat.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/vmstat.h b/include/linux/vmstat.h index 81a97cf8f0a0..d7f577f49d16 100644 --- a/include/linux/vmstat.h +++ b/include/linux/vmstat.h @@ -210,11 +210,6 @@ extern void zone_statistics(struct zone *, struct zone *); #endif /* CONFIG_NUMA */ -#define __add_zone_page_state(__z, __i, __d) \ - __mod_zone_page_state(__z, __i, __d) -#define __sub_zone_page_state(__z, __i, __d) \ - __mod_zone_page_state(__z, __i,-(__d)) - #define add_zone_page_state(__z, __i, __d) mod_zone_page_state(__z, __i, __d) #define sub_zone_page_state(__z, __i, __d) mod_zone_page_state(__z, __i, -(__d)) -- cgit v1.2.3 From adea02a1bea71a508da32c04d715485a1fe62029 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Mon, 21 Sep 2009 17:01:42 -0700 Subject: mm: count only reclaimable lru pages global_lru_pages() / zone_lru_pages() can be used in two ways: - to estimate max reclaimable pages in determine_dirtyable_memory() - to calculate the slab scan ratio When swap is full or not present, the anon lru lists are not reclaimable and also won't be scanned. So the anon pages shall not be counted in both usage scenarios. Also rename to _reclaimable_pages: now they are counting the possibly reclaimable lru pages. It can greatly (and correctly) increase the slab scan rate under high memory pressure (when most file pages have been reclaimed and swap is full/absent), thus reduce false OOM kills. Acked-by: Peter Zijlstra Reviewed-by: Rik van Riel Reviewed-by: Christoph Lameter Reviewed-by: Minchan Kim Cc: KOSAKI Motohiro Signed-off-by: Wu Fengguang Acked-by: Johannes Weiner Reviewed-by: Minchan Kim Reviewed-by: Jesse Barnes Cc: David Howells Cc: "Li, Ming Chun" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/vmstat.h | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) (limited to 'include/linux') diff --git a/include/linux/vmstat.h b/include/linux/vmstat.h index d7f577f49d16..2d0f222388a8 100644 --- a/include/linux/vmstat.h +++ b/include/linux/vmstat.h @@ -166,15 +166,8 @@ static inline unsigned long zone_page_state(struct zone *zone, return x; } -extern unsigned long global_lru_pages(void); - -static inline unsigned long zone_lru_pages(struct zone *zone) -{ - return (zone_page_state(zone, NR_ACTIVE_ANON) - + zone_page_state(zone, NR_ACTIVE_FILE) - + zone_page_state(zone, NR_INACTIVE_ANON) - + zone_page_state(zone, NR_INACTIVE_FILE)); -} +extern unsigned long global_reclaimable_pages(void); +extern unsigned long zone_reclaimable_pages(struct zone *zone); #ifdef CONFIG_NUMA /* -- cgit v1.2.3 From 451ea25da71590361c71bf3044c55b870a887d53 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Mon, 21 Sep 2009 17:01:48 -0700 Subject: mm: perform non-atomic test-clear of PG_mlocked on free By the time PG_mlocked is cleared in the page freeing path, nobody else is looking at our page->flags anymore. It is thus safe to make the test-and-clear non-atomic and thereby removing an unnecessary and expensive operation from a hotpath. Signed-off-by: Johannes Weiner Reviewed-by: Christoph Lameter Reviewed-by: KOSAKI Motohiro Cc: Christoph Lameter Cc: Mel Gorman Cc: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/page-flags.h | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h index 2b87acfc5f87..d07c0bb2203a 100644 --- a/include/linux/page-flags.h +++ b/include/linux/page-flags.h @@ -158,6 +158,9 @@ static inline int TestSetPage##uname(struct page *page) \ static inline int TestClearPage##uname(struct page *page) \ { return test_and_clear_bit(PG_##lname, &page->flags); } +#define __TESTCLEARFLAG(uname, lname) \ +static inline int __TestClearPage##uname(struct page *page) \ + { return __test_and_clear_bit(PG_##lname, &page->flags); } #define PAGEFLAG(uname, lname) TESTPAGEFLAG(uname, lname) \ SETPAGEFLAG(uname, lname) CLEARPAGEFLAG(uname, lname) @@ -184,6 +187,9 @@ static inline void __ClearPage##uname(struct page *page) { } #define TESTCLEARFLAG_FALSE(uname) \ static inline int TestClearPage##uname(struct page *page) { return 0; } +#define __TESTCLEARFLAG_FALSE(uname) \ +static inline int __TestClearPage##uname(struct page *page) { return 0; } + struct page; /* forward declaration */ TESTPAGEFLAG(Locked, locked) TESTSETFLAG(Locked, locked) @@ -250,11 +256,11 @@ PAGEFLAG(Unevictable, unevictable) __CLEARPAGEFLAG(Unevictable, unevictable) #ifdef CONFIG_HAVE_MLOCKED_PAGE_BIT #define MLOCK_PAGES 1 PAGEFLAG(Mlocked, mlocked) __CLEARPAGEFLAG(Mlocked, mlocked) - TESTSCFLAG(Mlocked, mlocked) + TESTSCFLAG(Mlocked, mlocked) __TESTCLEARFLAG(Mlocked, mlocked) #else #define MLOCK_PAGES 0 -PAGEFLAG_FALSE(Mlocked) - SETPAGEFLAG_NOOP(Mlocked) TESTCLEARFLAG_FALSE(Mlocked) +PAGEFLAG_FALSE(Mlocked) SETPAGEFLAG_NOOP(Mlocked) + TESTCLEARFLAG_FALSE(Mlocked) __TESTCLEARFLAG_FALSE(Mlocked) #endif #ifdef CONFIG_ARCH_USES_PG_UNCACHED -- cgit v1.2.3 From 828502d30073036a486d96b1fe051e0f08b6df83 Mon Sep 17 00:00:00 2001 From: Izik Eidus Date: Mon, 21 Sep 2009 17:01:51 -0700 Subject: ksm: add mmu_notifier set_pte_at_notify() KSM is a linux driver that allows dynamicly sharing identical memory pages between one or more processes. Unlike tradtional page sharing that is made at the allocation of the memory, ksm do it dynamicly after the memory was created. Memory is periodically scanned; identical pages are identified and merged. The sharing is made in a transparent way to the processes that use it. Ksm is highly important for hypervisors (kvm), where in production enviorments there might be many copys of the same data data among the host memory. This kind of data can be: similar kernels, librarys, cache, and so on. Even that ksm was wrote for kvm, any userspace application that want to use it to share its data can try it. Ksm may be useful for any application that might have similar (page aligment) data strctures among the memory, ksm will find this data merge it to one copy, and even if it will be changed and thereforew copy on writed, ksm will merge it again as soon as it will be identical again. Another reason to consider using ksm is the fact that it might simplify alot the userspace code of application that want to use shared private data, instead that the application will mange shared area, ksm will do this for the application, and even write to this data will be allowed without any synchinization acts from the application. Ksm was designed to be a loadable module that doesn't change the VM code of linux. This patch: The set_pte_at_notify() macro allows setting a pte in the shadow page table directly, instead of flushing the shadow page table entry and then getting vmexit to set it. It uses a new change_pte() callback to do so. set_pte_at_notify() is an optimization for kvm, and other users of mmu_notifiers, for COW pages. It is useful for kvm when ksm is used, because it allows kvm not to have to receive vmexit and only then map the ksm page into the shadow page table, but instead map it directly at the same time as Linux maps the page into the host page table. Users of mmu_notifiers who don't implement new mmu_notifier_change_pte() callback will just receive the mmu_notifier_invalidate_page() callback. Signed-off-by: Izik Eidus Signed-off-by: Chris Wright Signed-off-by: Hugh Dickins Cc: Andrea Arcangeli Cc: Rik van Riel Cc: Wu Fengguang Cc: Balbir Singh Cc: Hugh Dickins Cc: KAMEZAWA Hiroyuki Cc: Lee Schermerhorn Cc: Avi Kivity Cc: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmu_notifier.h | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mmu_notifier.h b/include/linux/mmu_notifier.h index b77486d152cd..4e02ee2b071e 100644 --- a/include/linux/mmu_notifier.h +++ b/include/linux/mmu_notifier.h @@ -61,6 +61,15 @@ struct mmu_notifier_ops { struct mm_struct *mm, unsigned long address); + /* + * change_pte is called in cases that pte mapping to page is changed: + * for example, when ksm remaps pte to point to a new shared page. + */ + void (*change_pte)(struct mmu_notifier *mn, + struct mm_struct *mm, + unsigned long address, + pte_t pte); + /* * Before this is invoked any secondary MMU is still ok to * read/write to the page previously pointed to by the Linux @@ -154,6 +163,8 @@ extern void __mmu_notifier_mm_destroy(struct mm_struct *mm); extern void __mmu_notifier_release(struct mm_struct *mm); extern int __mmu_notifier_clear_flush_young(struct mm_struct *mm, unsigned long address); +extern void __mmu_notifier_change_pte(struct mm_struct *mm, + unsigned long address, pte_t pte); extern void __mmu_notifier_invalidate_page(struct mm_struct *mm, unsigned long address); extern void __mmu_notifier_invalidate_range_start(struct mm_struct *mm, @@ -175,6 +186,13 @@ static inline int mmu_notifier_clear_flush_young(struct mm_struct *mm, return 0; } +static inline void mmu_notifier_change_pte(struct mm_struct *mm, + unsigned long address, pte_t pte) +{ + if (mm_has_notifiers(mm)) + __mmu_notifier_change_pte(mm, address, pte); +} + static inline void mmu_notifier_invalidate_page(struct mm_struct *mm, unsigned long address) { @@ -236,6 +254,16 @@ static inline void mmu_notifier_mm_destroy(struct mm_struct *mm) __young; \ }) +#define set_pte_at_notify(__mm, __address, __ptep, __pte) \ +({ \ + struct mm_struct *___mm = __mm; \ + unsigned long ___address = __address; \ + pte_t ___pte = __pte; \ + \ + set_pte_at(___mm, ___address, __ptep, ___pte); \ + mmu_notifier_change_pte(___mm, ___address, ___pte); \ +}) + #else /* CONFIG_MMU_NOTIFIER */ static inline void mmu_notifier_release(struct mm_struct *mm) @@ -248,6 +276,11 @@ static inline int mmu_notifier_clear_flush_young(struct mm_struct *mm, return 0; } +static inline void mmu_notifier_change_pte(struct mm_struct *mm, + unsigned long address, pte_t pte) +{ +} + static inline void mmu_notifier_invalidate_page(struct mm_struct *mm, unsigned long address) { @@ -273,6 +306,7 @@ static inline void mmu_notifier_mm_destroy(struct mm_struct *mm) #define ptep_clear_flush_young_notify ptep_clear_flush_young #define ptep_clear_flush_notify ptep_clear_flush +#define set_pte_at_notify set_pte_at #endif /* CONFIG_MMU_NOTIFIER */ -- cgit v1.2.3 From f8af4da3b4c14e7267c4ffb952079af3912c51c5 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 21 Sep 2009 17:01:57 -0700 Subject: ksm: the mm interface to ksm This patch presents the mm interface to a dummy version of ksm.c, for better scrutiny of that interface: the real ksm.c follows later. When CONFIG_KSM is not set, madvise(2) reject MADV_MERGEABLE and MADV_UNMERGEABLE with EINVAL, since that seems more helpful than pretending that they can be serviced. But when CONFIG_KSM=y, accept them even if KSM is not currently running, and even on areas which KSM will not touch (e.g. hugetlb or shared file or special driver mappings). Like other madvices, report ENOMEM despite success if any area in the range is unmapped, and use EAGAIN to report out of memory. Define vma flag VM_MERGEABLE to identify an area on which KSM may try merging pages: leave it to ksm_madvise() to decide whether to set it. Define mm flag MMF_VM_MERGEABLE to identify an mm which might contain VM_MERGEABLE areas, to minimize callouts when forking or exiting. Based upon earlier patches by Chris Wright and Izik Eidus. Signed-off-by: Hugh Dickins Signed-off-by: Chris Wright Signed-off-by: Izik Eidus Cc: Michael Kerrisk Cc: Andrea Arcangeli Cc: Rik van Riel Cc: Wu Fengguang Cc: Balbir Singh Cc: Hugh Dickins Cc: KAMEZAWA Hiroyuki Cc: Lee Schermerhorn Cc: Avi Kivity Cc: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/ksm.h | 50 ++++++++++++++++++++++++++++++++++++++++++++++++++ include/linux/mm.h | 1 + include/linux/sched.h | 7 +++++++ 3 files changed, 58 insertions(+) create mode 100644 include/linux/ksm.h (limited to 'include/linux') diff --git a/include/linux/ksm.h b/include/linux/ksm.h new file mode 100644 index 000000000000..eb2a448981ee --- /dev/null +++ b/include/linux/ksm.h @@ -0,0 +1,50 @@ +#ifndef __LINUX_KSM_H +#define __LINUX_KSM_H +/* + * Memory merging support. + * + * This code enables dynamic sharing of identical pages found in different + * memory areas, even if they are not shared by fork(). + */ + +#include +#include +#include + +#ifdef CONFIG_KSM +int ksm_madvise(struct vm_area_struct *vma, unsigned long start, + unsigned long end, int advice, unsigned long *vm_flags); +int __ksm_enter(struct mm_struct *mm); +void __ksm_exit(struct mm_struct *mm); + +static inline int ksm_fork(struct mm_struct *mm, struct mm_struct *oldmm) +{ + if (test_bit(MMF_VM_MERGEABLE, &oldmm->flags)) + return __ksm_enter(mm); + return 0; +} + +static inline void ksm_exit(struct mm_struct *mm) +{ + if (test_bit(MMF_VM_MERGEABLE, &mm->flags)) + __ksm_exit(mm); +} +#else /* !CONFIG_KSM */ + +static inline int ksm_madvise(struct vm_area_struct *vma, unsigned long start, + unsigned long end, int advice, unsigned long *vm_flags) +{ + return 0; +} + +static inline int ksm_fork(struct mm_struct *mm, struct mm_struct *oldmm) +{ + return 0; +} + +static inline void ksm_exit(struct mm_struct *mm) +{ +} +#endif /* !CONFIG_KSM */ + +#endif diff --git a/include/linux/mm.h b/include/linux/mm.h index d3c8ae7c8015..d808cf832c4d 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -103,6 +103,7 @@ extern unsigned int kobjsize(const void *objp); #define VM_MIXEDMAP 0x10000000 /* Can contain "struct page" and pure PFN pages */ #define VM_SAO 0x20000000 /* Strong Access Ordering (powerpc) */ #define VM_PFN_AT_MMAP 0x40000000 /* PFNMAP vma that is fully mapped at mmap time */ +#define VM_MERGEABLE 0x80000000 /* KSM may merge identical pages */ #ifndef VM_STACK_DEFAULT_FLAGS /* arch can override this */ #define VM_STACK_DEFAULT_FLAGS VM_DATA_DEFAULT_FLAGS diff --git a/include/linux/sched.h b/include/linux/sched.h index 8fe351c3914a..8f3e63cb33a6 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -434,7 +434,9 @@ extern int get_dumpable(struct mm_struct *mm); /* dumpable bits */ #define MMF_DUMPABLE 0 /* core dump is permitted */ #define MMF_DUMP_SECURELY 1 /* core file is readable only by root */ + #define MMF_DUMPABLE_BITS 2 +#define MMF_DUMPABLE_MASK ((1 << MMF_DUMPABLE_BITS) - 1) /* coredump filter bits */ #define MMF_DUMP_ANON_PRIVATE 2 @@ -444,6 +446,7 @@ extern int get_dumpable(struct mm_struct *mm); #define MMF_DUMP_ELF_HEADERS 6 #define MMF_DUMP_HUGETLB_PRIVATE 7 #define MMF_DUMP_HUGETLB_SHARED 8 + #define MMF_DUMP_FILTER_SHIFT MMF_DUMPABLE_BITS #define MMF_DUMP_FILTER_BITS 7 #define MMF_DUMP_FILTER_MASK \ @@ -457,6 +460,10 @@ extern int get_dumpable(struct mm_struct *mm); #else # define MMF_DUMP_MASK_DEFAULT_ELF 0 #endif + /* leave room for more dump flags */ +#define MMF_VM_MERGEABLE 16 /* KSM may merge identical pages */ + +#define MMF_INIT_MASK (MMF_DUMPABLE_MASK | MMF_DUMP_FILTER_MASK) struct sighand_struct { atomic_t count; -- cgit v1.2.3 From 21333b2b66b805a360641568588e5a0bb06d9d1f Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 21 Sep 2009 17:01:59 -0700 Subject: ksm: no debug in page_dup_rmap() page_dup_rmap(), used on each mapped page when forking, was originally just an inline atomic_inc of mapcount. 2.6.22 added CONFIG_DEBUG_VM out-of-line checks to it, which would need to be ever-so-slightly complicated to allow for the PageKsm() we're about to define. But I think these checks never caught anything. And if it's coding errors we're worried about, such checks should be in page_remove_rmap() too, not just when forking; whereas if it's pagetable corruption we're worried about, then they shouldn't be limited to CONFIG_DEBUG_VM. Oh, just revert page_dup_rmap() to an inline atomic_inc of mapcount. Signed-off-by: Hugh Dickins Signed-off-by: Chris Wright Signed-off-by: Izik Eidus Cc: Nick Piggin Cc: Andrea Arcangeli Cc: Rik van Riel Cc: Wu Fengguang Cc: Balbir Singh Cc: Hugh Dickins Cc: KAMEZAWA Hiroyuki Cc: Lee Schermerhorn Cc: Avi Kivity Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/rmap.h | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/rmap.h b/include/linux/rmap.h index bf116d0dbf23..477841d29fce 100644 --- a/include/linux/rmap.h +++ b/include/linux/rmap.h @@ -71,14 +71,10 @@ void page_add_new_anon_rmap(struct page *, struct vm_area_struct *, unsigned lon void page_add_file_rmap(struct page *); void page_remove_rmap(struct page *); -#ifdef CONFIG_DEBUG_VM -void page_dup_rmap(struct page *page, struct vm_area_struct *vma, unsigned long address); -#else -static inline void page_dup_rmap(struct page *page, struct vm_area_struct *vma, unsigned long address) +static inline void page_dup_rmap(struct page *page) { atomic_inc(&page->_mapcount); } -#endif /* * Called from mm/vmscan.c to handle paging out -- cgit v1.2.3 From 9a840895147b12de5cdd633c600b38686840ee53 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 21 Sep 2009 17:02:01 -0700 Subject: ksm: identify PageKsm pages KSM will need to identify its kernel merged pages unambiguously, and /proc/kpageflags will probably like to do so too. Since KSM will only be substituting anonymous pages, statistics are best preserved by making a PageKsm page a special PageAnon page: one with no anon_vma. But KSM then needs its own page_add_ksm_rmap() - keep it in ksm.h near PageKsm; and do_wp_page() must COW them, unlike singly mapped PageAnons. Signed-off-by: Hugh Dickins Signed-off-by: Chris Wright Signed-off-by: Izik Eidus Cc: Wu Fengguang Cc: Andrea Arcangeli Cc: Rik van Riel Cc: Wu Fengguang Cc: Balbir Singh Cc: Hugh Dickins Cc: KAMEZAWA Hiroyuki Cc: Lee Schermerhorn Cc: Avi Kivity Cc: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/ksm.h | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ksm.h b/include/linux/ksm.h index eb2a448981ee..a485c14ecd5d 100644 --- a/include/linux/ksm.h +++ b/include/linux/ksm.h @@ -10,6 +10,7 @@ #include #include #include +#include #ifdef CONFIG_KSM int ksm_madvise(struct vm_area_struct *vma, unsigned long start, @@ -29,6 +30,27 @@ static inline void ksm_exit(struct mm_struct *mm) if (test_bit(MMF_VM_MERGEABLE, &mm->flags)) __ksm_exit(mm); } + +/* + * A KSM page is one of those write-protected "shared pages" or "merged pages" + * which KSM maps into multiple mms, wherever identical anonymous page content + * is found in VM_MERGEABLE vmas. It's a PageAnon page, with NULL anon_vma. + */ +static inline int PageKsm(struct page *page) +{ + return ((unsigned long)page->mapping == PAGE_MAPPING_ANON); +} + +/* + * But we have to avoid the checking which page_add_anon_rmap() performs. + */ +static inline void page_add_ksm_rmap(struct page *page) +{ + if (atomic_inc_and_test(&page->_mapcount)) { + page->mapping = (void *) PAGE_MAPPING_ANON; + __inc_zone_page_state(page, NR_ANON_PAGES); + } +} #else /* !CONFIG_KSM */ static inline int ksm_madvise(struct vm_area_struct *vma, unsigned long start, @@ -45,6 +67,13 @@ static inline int ksm_fork(struct mm_struct *mm, struct mm_struct *oldmm) static inline void ksm_exit(struct mm_struct *mm) { } + +static inline int PageKsm(struct page *page) +{ + return 0; +} + +/* No stub required for page_add_ksm_rmap(page) */ #endif /* !CONFIG_KSM */ #endif -- cgit v1.2.3 From 9ba6929480088a85c1ff60a4b1f1c9fc80dbd2b7 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 21 Sep 2009 17:02:20 -0700 Subject: ksm: fix oom deadlock There's a now-obvious deadlock in KSM's out-of-memory handling: imagine ksmd or KSM_RUN_UNMERGE handling, holding ksm_thread_mutex, trying to allocate a page to break KSM in an mm which becomes the OOM victim (quite likely in the unmerge case): it's killed and goes to exit, and hangs there waiting to acquire ksm_thread_mutex. Clearly we must not require ksm_thread_mutex in __ksm_exit, simple though that made everything else: perhaps use mmap_sem somehow? And part of the answer lies in the comments on unmerge_ksm_pages: __ksm_exit should also leave all the rmap_item removal to ksmd. But there's a fundamental problem, that KSM relies upon mmap_sem to guarantee the consistency of the mm it's dealing with, yet exit_mmap tears down an mm without taking mmap_sem. And bumping mm_users won't help at all, that just ensures that the pages the OOM killer assumes are on their way to being freed will not be freed. The best answer seems to be, to move the ksm_exit callout from just before exit_mmap, to the middle of exit_mmap: after the mm's pages have been freed (if the mmu_gather is flushed), but before its page tables and vma structures have been freed; and down_write,up_write mmap_sem there to serialize with KSM's own reliance on mmap_sem. But KSM then needs to be careful, whenever it downs mmap_sem, to check that the mm is not already exiting: there's a danger of using find_vma on a layout that's being torn apart, or writing into page tables which have been freed for reuse; and even do_anonymous_page and __do_fault need to check they're not being called by break_ksm to reinstate a pte after zap_pte_range has zapped that page table. Though it might be clearer to add an exiting flag, set while holding mmap_sem in __ksm_exit, that wouldn't cover the issue of reinstating a zapped pte. All we need is to check whether mm_users is 0 - but must remember that ksmd may detect that before __ksm_exit is reached. So, ksm_test_exit(mm) added to comment such checks on mm->mm_users. __ksm_exit now has to leave clearing up the rmap_items to ksmd, that needs ksm_thread_mutex; but shift the exiting mm just after the ksm_scan cursor so that it will soon be dealt with. __ksm_enter raise mm_count to hold the mm_struct, ksmd's exit processing (exactly like its processing when it finds all VM_MERGEABLEs unmapped) mmdrop it, similar procedure for KSM_RUN_UNMERGE (which has stopped ksmd). But also give __ksm_exit a fast path: when there's no complication (no rmap_items attached to mm and it's not at the ksm_scan cursor), it can safely do all the exiting work itself. This is not just an optimization: when ksmd is not running, the raised mm_count would otherwise leak mm_structs. Signed-off-by: Hugh Dickins Acked-by: Izik Eidus Cc: Andrea Arcangeli Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/ksm.h | 31 +++++++++++++++++++++++++++---- 1 file changed, 27 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ksm.h b/include/linux/ksm.h index a485c14ecd5d..2d64ff30c0de 100644 --- a/include/linux/ksm.h +++ b/include/linux/ksm.h @@ -12,11 +12,14 @@ #include #include +struct mmu_gather; + #ifdef CONFIG_KSM int ksm_madvise(struct vm_area_struct *vma, unsigned long start, unsigned long end, int advice, unsigned long *vm_flags); int __ksm_enter(struct mm_struct *mm); -void __ksm_exit(struct mm_struct *mm); +void __ksm_exit(struct mm_struct *mm, + struct mmu_gather **tlbp, unsigned long end); static inline int ksm_fork(struct mm_struct *mm, struct mm_struct *oldmm) { @@ -25,10 +28,24 @@ static inline int ksm_fork(struct mm_struct *mm, struct mm_struct *oldmm) return 0; } -static inline void ksm_exit(struct mm_struct *mm) +/* + * For KSM to handle OOM without deadlock when it's breaking COW in a + * likely victim of the OOM killer, exit_mmap() has to serialize with + * ksm_exit() after freeing mm's pages but before freeing its page tables. + * That leaves a window in which KSM might refault pages which have just + * been finally unmapped: guard against that with ksm_test_exit(), and + * use it after getting mmap_sem in ksm.c, to check if mm is exiting. + */ +static inline bool ksm_test_exit(struct mm_struct *mm) +{ + return atomic_read(&mm->mm_users) == 0; +} + +static inline void ksm_exit(struct mm_struct *mm, + struct mmu_gather **tlbp, unsigned long end) { if (test_bit(MMF_VM_MERGEABLE, &mm->flags)) - __ksm_exit(mm); + __ksm_exit(mm, tlbp, end); } /* @@ -64,7 +81,13 @@ static inline int ksm_fork(struct mm_struct *mm, struct mm_struct *oldmm) return 0; } -static inline void ksm_exit(struct mm_struct *mm) +static inline bool ksm_test_exit(struct mm_struct *mm) +{ + return 0; +} + +static inline void ksm_exit(struct mm_struct *mm, + struct mmu_gather **tlbp, unsigned long end) { } -- cgit v1.2.3 From 1c2fb7a4c2ca7a958b02bc1e615d0254990bba8d Mon Sep 17 00:00:00 2001 From: Andrea Arcangeli Date: Mon, 21 Sep 2009 17:02:22 -0700 Subject: ksm: fix deadlock with munlock in exit_mmap Rawhide users have reported hang at startup when cryptsetup is run: the same problem can be simply reproduced by running a program int main() { mlockall(MCL_CURRENT | MCL_FUTURE); return 0; } The problem is that exit_mmap() applies munlock_vma_pages_all() to clean up VM_LOCKED areas, and its current implementation (stupidly) tries to fault in absent pages, for example where PROT_NONE prevented them being faulted in when mlocking. Whereas the "ksm: fix oom deadlock" patch, knowing there's a race by which KSM might try to fault in pages after exit_mmap() had finally zapped the range, backs out of such faults doing nothing when its ksm_test_exit() notices mm_users 0. So revert that part of "ksm: fix oom deadlock" which moved the ksm_exit() call from before exit_mmap() to the middle of exit_mmap(); and remove those ksm_test_exit() checks from the page fault paths, so allowing the munlocking to proceed without interference. ksm_exit, if there are rmap_items still chained on this mm slot, takes mmap_sem write side: so preventing KSM from working on an mm while exit_mmap runs. And KSM will bail out as soon as it notices that mm_users is already zero, thanks to its internal ksm_test_exit checks. So that when a task is killed by OOM killer or the user, KSM will not indefinitely prevent it from running exit_mmap to release its memory. This does break a part of what "ksm: fix oom deadlock" was trying to achieve. When unmerging KSM (echo 2 >/sys/kernel/mm/ksm), and even when ksmd itself has to cancel a KSM page, it is possible that the first OOM-kill victim would be the KSM process being faulted: then its memory won't be freed until a second victim has been selected (freeing memory for the unmerging fault to complete). But the OOM killer is already liable to kill a second victim once the intended victim's p->mm goes to NULL: so there's not much point in rejecting this KSM patch before fixing that OOM behaviour. It is very much more important to allow KSM users to boot up, than to haggle over an unlikely and poorly supported OOM case. We also intend to fix munlocking to not fault pages: at which point this patch _could_ be reverted; though that would be controversial, so we hope to find a better solution. Signed-off-by: Andrea Arcangeli Acked-by: Justin M. Forbes Acked-for-now-by: Hugh Dickins Cc: Izik Eidus Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/ksm.h | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ksm.h b/include/linux/ksm.h index 2d64ff30c0de..0e26de6adb51 100644 --- a/include/linux/ksm.h +++ b/include/linux/ksm.h @@ -18,8 +18,7 @@ struct mmu_gather; int ksm_madvise(struct vm_area_struct *vma, unsigned long start, unsigned long end, int advice, unsigned long *vm_flags); int __ksm_enter(struct mm_struct *mm); -void __ksm_exit(struct mm_struct *mm, - struct mmu_gather **tlbp, unsigned long end); +void __ksm_exit(struct mm_struct *mm); static inline int ksm_fork(struct mm_struct *mm, struct mm_struct *oldmm) { @@ -41,11 +40,10 @@ static inline bool ksm_test_exit(struct mm_struct *mm) return atomic_read(&mm->mm_users) == 0; } -static inline void ksm_exit(struct mm_struct *mm, - struct mmu_gather **tlbp, unsigned long end) +static inline void ksm_exit(struct mm_struct *mm) { if (test_bit(MMF_VM_MERGEABLE, &mm->flags)) - __ksm_exit(mm, tlbp, end); + __ksm_exit(mm); } /* @@ -86,8 +84,7 @@ static inline bool ksm_test_exit(struct mm_struct *mm) return 0; } -static inline void ksm_exit(struct mm_struct *mm, - struct mmu_gather **tlbp, unsigned long end) +static inline void ksm_exit(struct mm_struct *mm) { } -- cgit v1.2.3 From a913e182ab9484308e870af37a14d372742d53b0 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 21 Sep 2009 17:02:26 -0700 Subject: ksm: clean up obsolete references A few cleanups, given the munlock fix: the comment on ksm_test_exit() no longer applies, and it can be made private to ksm.c; there's no more reference to mmu_gather or tlb.h, and mmap.c doesn't need ksm.h. Signed-off-by: Hugh Dickins Acked-by: Izik Eidus Cc: Andrea Arcangeli Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/ksm.h | 20 -------------------- 1 file changed, 20 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ksm.h b/include/linux/ksm.h index 0e26de6adb51..a485c14ecd5d 100644 --- a/include/linux/ksm.h +++ b/include/linux/ksm.h @@ -12,8 +12,6 @@ #include #include -struct mmu_gather; - #ifdef CONFIG_KSM int ksm_madvise(struct vm_area_struct *vma, unsigned long start, unsigned long end, int advice, unsigned long *vm_flags); @@ -27,19 +25,6 @@ static inline int ksm_fork(struct mm_struct *mm, struct mm_struct *oldmm) return 0; } -/* - * For KSM to handle OOM without deadlock when it's breaking COW in a - * likely victim of the OOM killer, exit_mmap() has to serialize with - * ksm_exit() after freeing mm's pages but before freeing its page tables. - * That leaves a window in which KSM might refault pages which have just - * been finally unmapped: guard against that with ksm_test_exit(), and - * use it after getting mmap_sem in ksm.c, to check if mm is exiting. - */ -static inline bool ksm_test_exit(struct mm_struct *mm) -{ - return atomic_read(&mm->mm_users) == 0; -} - static inline void ksm_exit(struct mm_struct *mm) { if (test_bit(MMF_VM_MERGEABLE, &mm->flags)) @@ -79,11 +64,6 @@ static inline int ksm_fork(struct mm_struct *mm, struct mm_struct *oldmm) return 0; } -static inline bool ksm_test_exit(struct mm_struct *mm) -{ - return 0; -} - static inline void ksm_exit(struct mm_struct *mm) { } -- cgit v1.2.3 From 35451beecbd7c86ce3249d543594517a5fe9a0cd Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 21 Sep 2009 17:02:27 -0700 Subject: ksm: unmerge is an origin of OOMs Just as the swapoff system call allocates many pages of RAM to various processes, perhaps triggering OOM, so "echo 2 >/sys/kernel/mm/ksm/run" (unmerge) is liable to allocate many pages of RAM to various processes, perhaps triggering OOM; and each is normally run from a modest admin process (swapoff or shell), easily repeated until it succeeds. So treat unmerge_and_remove_all_rmap_items() in the same way that we treat try_to_unuse(): generalize PF_SWAPOFF to PF_OOM_ORIGIN, and bracket both with that, to ask the OOM killer to kill them first, to prevent them from spawning more and more OOM kills. Signed-off-by: Hugh Dickins Acked-by: Izik Eidus Cc: Andrea Arcangeli Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/sched.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 8f3e63cb33a6..899d7304d594 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1720,7 +1720,7 @@ extern cputime_t task_gtime(struct task_struct *p); #define PF_FROZEN 0x00010000 /* frozen for system suspend */ #define PF_FSTRANS 0x00020000 /* inside a filesystem transaction */ #define PF_KSWAPD 0x00040000 /* I am kswapd */ -#define PF_SWAPOFF 0x00080000 /* I am in swapoff */ +#define PF_OOM_ORIGIN 0x00080000 /* Allocating much memory to others */ #define PF_LESS_THROTTLE 0x00100000 /* Throttle me less: I clean memory */ #define PF_KTHREAD 0x00200000 /* I am a kernel thread */ #define PF_RANDOMIZE 0x00400000 /* randomize virtual address space */ -- cgit v1.2.3 From 38a398572fa2d8124f7479e40db581b5b72719c9 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Mon, 21 Sep 2009 17:02:39 -0700 Subject: page-allocator: remove dead function free_cold_page() The function free_cold_page() has no callers so delete it. Signed-off-by: Mel Gorman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/gfp.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/gfp.h b/include/linux/gfp.h index 7c777a0da17a..c32bfa8e7f1e 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -326,7 +326,6 @@ void free_pages_exact(void *virt, size_t size); extern void __free_pages(struct page *page, unsigned int order); extern void free_pages(unsigned long addr, unsigned int order); extern void free_hot_page(struct page *page); -extern void free_cold_page(struct page *page); #define __free_page(page) __free_pages((page), 0) #define free_page(addr) free_pages((addr),0) -- cgit v1.2.3 From bba78819548a59a52e60f0b259997bbd011164ae Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Mon, 21 Sep 2009 17:02:56 -0700 Subject: mm: remove broken 'kzalloc' mempool The kzalloc mempool zeros items when they are initially allocated, but does not rezero used items that are returned to the pool. Consequently mempool_alloc()s may return non-zeroed memory. Since there are/were only two in-tree users for mempool_create_kzalloc_pool(), and 'fixing' this in a way that will re-zero used (but not new) items before first use is non-trivial, just remove it. Signed-off-by: Sage Weil Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mempool.h | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mempool.h b/include/linux/mempool.h index 9be484d11283..7c08052e3321 100644 --- a/include/linux/mempool.h +++ b/include/linux/mempool.h @@ -47,22 +47,16 @@ mempool_create_slab_pool(int min_nr, struct kmem_cache *kc) } /* - * 2 mempool_alloc_t's and a mempool_free_t to kmalloc/kzalloc and kfree - * the amount of memory specified by pool_data + * a mempool_alloc_t and a mempool_free_t to kmalloc and kfree the + * amount of memory specified by pool_data */ void *mempool_kmalloc(gfp_t gfp_mask, void *pool_data); -void *mempool_kzalloc(gfp_t gfp_mask, void *pool_data); void mempool_kfree(void *element, void *pool_data); static inline mempool_t *mempool_create_kmalloc_pool(int min_nr, size_t size) { return mempool_create(min_nr, mempool_kmalloc, mempool_kfree, (void *) size); } -static inline mempool_t *mempool_create_kzalloc_pool(int min_nr, size_t size) -{ - return mempool_create(min_nr, mempool_kzalloc, mempool_kfree, - (void *) size); -} /* * A mempool_alloc_t and mempool_free_t for a simple page allocator that -- cgit v1.2.3 From 401a8e1c1670085b8177330ca47d4f7c4ac88761 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Mon, 21 Sep 2009 17:02:58 -0700 Subject: mm: introduce page_lru_base_type() Instead of abusing page_is_file_cache() for LRU list index arithmetic, add another helper with a more appropriate name and convert the non-boolean users of page_is_file_cache() accordingly. This new helper gives the LRU base type a page is supposed to live on, inactive anon or inactive file. [hugh.dickins@tiscali.co.uk: convert del_page_from_lru() also] Signed-off-by: Johannes Weiner Reviewed-by: Rik van Riel Cc: Minchan Kim Reviewed-by: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mm_inline.h | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mm_inline.h b/include/linux/mm_inline.h index 7fbb97267556..99977ff45b83 100644 --- a/include/linux/mm_inline.h +++ b/include/linux/mm_inline.h @@ -39,21 +39,36 @@ del_page_from_lru_list(struct zone *zone, struct page *page, enum lru_list l) mem_cgroup_del_lru_list(page, l); } +/** + * page_lru_base_type - which LRU list type should a page be on? + * @page: the page to test + * + * Used for LRU list index arithmetic. + * + * Returns the base LRU type - file or anon - @page should be on. + */ +static inline enum lru_list page_lru_base_type(struct page *page) +{ + if (page_is_file_cache(page)) + return LRU_INACTIVE_FILE; + return LRU_INACTIVE_ANON; +} + static inline void del_page_from_lru(struct zone *zone, struct page *page) { - enum lru_list l = LRU_BASE; + enum lru_list l; list_del(&page->lru); if (PageUnevictable(page)) { __ClearPageUnevictable(page); l = LRU_UNEVICTABLE; } else { + l = page_lru_base_type(page); if (PageActive(page)) { __ClearPageActive(page); l += LRU_ACTIVE; } - l += page_is_file_cache(page); } __dec_zone_state(zone, NR_LRU_BASE + l); mem_cgroup_del_lru_list(page, l); @@ -68,14 +83,14 @@ del_page_from_lru(struct zone *zone, struct page *page) */ static inline enum lru_list page_lru(struct page *page) { - enum lru_list lru = LRU_BASE; + enum lru_list lru; if (PageUnevictable(page)) lru = LRU_UNEVICTABLE; else { + lru = page_lru_base_type(page); if (PageActive(page)) lru += LRU_ACTIVE; - lru += page_is_file_cache(page); } return lru; -- cgit v1.2.3 From 6c0b13519d1c755d874e82c8fb8a6dcef0ee402c Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Mon, 21 Sep 2009 17:02:59 -0700 Subject: mm: return boolean from page_is_file_cache() page_is_file_cache() has been used for both boolean checks and LRU arithmetic, which was always a bit weird. Now that page_lru_base_type() exists for LRU arithmetic, make page_is_file_cache() a real predicate function and adjust the boolean-using callsites to drop those pesky double negations. Signed-off-by: Johannes Weiner Reviewed-by: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mm_inline.h | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mm_inline.h b/include/linux/mm_inline.h index 99977ff45b83..8835b877b8db 100644 --- a/include/linux/mm_inline.h +++ b/include/linux/mm_inline.h @@ -5,7 +5,7 @@ * page_is_file_cache - should the page be on a file LRU or anon LRU? * @page: the page to test * - * Returns LRU_FILE if @page is page cache page backed by a regular filesystem, + * Returns 1 if @page is page cache page backed by a regular filesystem, * or 0 if @page is anonymous, tmpfs or otherwise ram or swap backed. * Used by functions that manipulate the LRU lists, to sort a page * onto the right LRU list. @@ -16,11 +16,7 @@ */ static inline int page_is_file_cache(struct page *page) { - if (PageSwapBacked(page)) - return 0; - - /* The page is page cache backed by a normal filesystem. */ - return LRU_FILE; + return !PageSwapBacked(page); } static inline void -- cgit v1.2.3 From edcf4748cd56adcdf0856cc99ef108a4ea3ac7fe Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Mon, 21 Sep 2009 17:02:59 -0700 Subject: mm: return boolean from page_has_private() Make page_has_private() return a true boolean value and remove the double negations from the two callsites using it for arithmetic. Signed-off-by: Johannes Weiner Cc: Christoph Lameter Reviewed-by: Christoph Lameter Reviewed-by: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/page-flags.h | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h index d07c0bb2203a..13de789f0a5c 100644 --- a/include/linux/page-flags.h +++ b/include/linux/page-flags.h @@ -402,8 +402,8 @@ static inline void __ClearPageTail(struct page *page) */ #define PAGE_FLAGS_CHECK_AT_PREP ((1 << NR_PAGEFLAGS) - 1) -#endif /* !__GENERATING_BOUNDS_H */ - +#define PAGE_FLAGS_PRIVATE \ + (1 << PG_private | 1 << PG_private_2) /** * page_has_private - Determine if page has private stuff * @page: The page to be checked @@ -411,8 +411,11 @@ static inline void __ClearPageTail(struct page *page) * Determine if a page has private stuff, indicating that release routines * should be invoked upon it. */ -#define page_has_private(page) \ - ((page)->flags & ((1 << PG_private) | \ - (1 << PG_private_2))) +static inline int page_has_private(struct page *page) +{ + return !!(page->flags & PAGE_FLAGS_PRIVATE); +} + +#endif /* !__GENERATING_BOUNDS_H */ #endif /* PAGE_FLAGS_H */ -- cgit v1.2.3 From 4481374ce88ba8f460c8b89f2572027bd27057d0 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 21 Sep 2009 17:03:05 -0700 Subject: mm: replace various uses of num_physpages by totalram_pages Sizing of memory allocations shouldn't depend on the number of physical pages found in a system, as that generally includes (perhaps a huge amount of) non-RAM pages. The amount of what actually is usable as storage should instead be used as a basis here. Some of the calculations (i.e. those not intending to use high memory) should likely even use (totalram_pages - totalhigh_pages). Signed-off-by: Jan Beulich Acked-by: Rusty Russell Acked-by: Ingo Molnar Cc: Dave Airlie Cc: Kyle McMartin Cc: Jeremy Fitzhardinge Cc: Pekka Enberg Cc: Hugh Dickins Cc: "David S. Miller" Cc: Patrick McHardy Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mm.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index d808cf832c4d..19ff81c49ba6 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -25,6 +25,7 @@ extern unsigned long max_mapnr; #endif extern unsigned long num_physpages; +extern unsigned long totalram_pages; extern void * high_memory; extern int page_cluster; -- cgit v1.2.3 From 2c85f51d222ccdd8c401d77a36b723a89156810d Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 21 Sep 2009 17:03:07 -0700 Subject: mm: also use alloc_large_system_hash() for the PID hash table This is being done by allowing boot time allocations to specify that they may want a sub-page sized amount of memory. Overall this seems more consistent with the other hash table allocations, and allows making two supposedly mm-only variables really mm-only (nr_{kernel,all}_pages). Signed-off-by: Jan Beulich Cc: Ingo Molnar Cc: "Eric W. Biederman" Cc: Mel Gorman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/bootmem.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h index bc3ab7073695..dd97fb8408a8 100644 --- a/include/linux/bootmem.h +++ b/include/linux/bootmem.h @@ -132,9 +132,6 @@ static inline void *alloc_remap(int nid, unsigned long size) } #endif /* CONFIG_HAVE_ARCH_ALLOC_REMAP */ -extern unsigned long __meminitdata nr_kernel_pages; -extern unsigned long __meminitdata nr_all_pages; - extern void *alloc_large_system_hash(const char *tablename, unsigned long bucketsize, unsigned long numentries, @@ -145,6 +142,8 @@ extern void *alloc_large_system_hash(const char *tablename, unsigned long limit); #define HASH_EARLY 0x00000001 /* Allocating during early boot? */ +#define HASH_SMALL 0x00000002 /* sub-page allocation allowed, min + * shift passed via *_hash_shift */ /* Only NUMA needs hash distribution. 64bit NUMA architectures have * sufficient vmalloc space. -- cgit v1.2.3 From 1a8670a29b5277cbe601f74ab63d2c5211fb3005 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Mon, 21 Sep 2009 17:03:09 -0700 Subject: oom: move oom_killer_enable()/oom_killer_disable to where they belong Signed-off-by: Alexey Dobriyan Acked-by: David Rientjes Reviewed-by: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/gfp.h | 12 ------------ include/linux/oom.h | 11 +++++++++++ 2 files changed, 11 insertions(+), 12 deletions(-) (limited to 'include/linux') diff --git a/include/linux/gfp.h b/include/linux/gfp.h index c32bfa8e7f1e..f53e9b868c26 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -335,18 +335,6 @@ void drain_zone_pages(struct zone *zone, struct per_cpu_pages *pcp); void drain_all_pages(void); void drain_local_pages(void *dummy); -extern bool oom_killer_disabled; - -static inline void oom_killer_disable(void) -{ - oom_killer_disabled = true; -} - -static inline void oom_killer_enable(void) -{ - oom_killer_disabled = false; -} - extern gfp_t gfp_allowed_mask; static inline void set_gfp_allowed_mask(gfp_t mask) diff --git a/include/linux/oom.h b/include/linux/oom.h index a7979baf1e39..6aac5fe4f6f1 100644 --- a/include/linux/oom.h +++ b/include/linux/oom.h @@ -30,5 +30,16 @@ extern void out_of_memory(struct zonelist *zonelist, gfp_t gfp_mask, int order); extern int register_oom_notifier(struct notifier_block *nb); extern int unregister_oom_notifier(struct notifier_block *nb); +extern bool oom_killer_disabled; + +static inline void oom_killer_disable(void) +{ + oom_killer_disabled = true; +} + +static inline void oom_killer_enable(void) +{ + oom_killer_disabled = false; +} #endif /* __KERNEL__*/ #endif /* _INCLUDE_LINUX_OOM_H */ -- cgit v1.2.3 From f86296317434b21585e229f6c49a33cb9ebab4d3 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Mon, 21 Sep 2009 17:03:11 -0700 Subject: mm: do batched scans for mem_cgroup For mem_cgroup, shrink_zone() may call shrink_list() with nr_to_scan=1, in which case shrink_list() _still_ calls isolate_pages() with the much larger SWAP_CLUSTER_MAX. It effectively scales up the inactive list scan rate by up to 32 times. For example, with 16k inactive pages and DEF_PRIORITY=12, (16k >> 12)=4. So when shrink_zone() expects to scan 4 pages in the active/inactive list, the active list will be scanned 4 pages, while the inactive list will be (over) scanned SWAP_CLUSTER_MAX=32 pages in effect. And that could break the balance between the two lists. It can further impact the scan of anon active list, due to the anon active/inactive ratio rebalance logic in balance_pgdat()/shrink_zone(): inactive anon list over scanned => inactive_anon_is_low() == TRUE => shrink_active_list() => active anon list over scanned So the end result may be - anon inactive => over scanned - anon active => over scanned (maybe not as much) - file inactive => over scanned - file active => under scanned (relatively) The accesses to nr_saved_scan are not lock protected and so not 100% accurate, however we can tolerate small errors and the resulted small imbalanced scan rates between zones. Cc: Rik van Riel Reviewed-by: KOSAKI Motohiro Acked-by: Balbir Singh Reviewed-by: Minchan Kim Signed-off-by: KAMEZAWA Hiroyuki Signed-off-by: Wu Fengguang Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmzone.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 9c50309b30a1..c188ea624c74 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -273,6 +273,11 @@ struct zone_reclaim_stat { */ unsigned long recent_rotated[2]; unsigned long recent_scanned[2]; + + /* + * accumulated for batching + */ + unsigned long nr_saved_scan[NR_LRU_LISTS]; }; struct zone { @@ -327,7 +332,6 @@ struct zone { spinlock_t lru_lock; struct zone_lru { struct list_head list; - unsigned long nr_saved_scan; /* accumulated for batching */ } lru[NR_LRU_LISTS]; struct zone_reclaim_stat reclaim_stat; -- cgit v1.2.3 From 28b83c5193e7ab951e402252278f2cc79dc4d298 Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Mon, 21 Sep 2009 17:03:13 -0700 Subject: oom: move oom_adj value from task_struct to signal_struct Currently, OOM logic callflow is here. __out_of_memory() select_bad_process() for each task badness() calculate badness of one task oom_kill_process() search child oom_kill_task() kill target task and mm shared tasks with it example, process-A have two thread, thread-A and thread-B and it have very fat memory and each thread have following oom_adj and oom_score. thread-A: oom_adj = OOM_DISABLE, oom_score = 0 thread-B: oom_adj = 0, oom_score = very-high Then, select_bad_process() select thread-B, but oom_kill_task() refuse kill the task because thread-A have OOM_DISABLE. Thus __out_of_memory() call select_bad_process() again. but select_bad_process() select the same task. It mean kernel fall in livelock. The fact is, select_bad_process() must select killable task. otherwise OOM logic go into livelock. And root cause is, oom_adj shouldn't be per-thread value. it should be per-process value because OOM-killer kill a process, not thread. Thus This patch moves oomkilladj (now more appropriately named oom_adj) from struct task_struct to struct signal_struct. it naturally prevent select_bad_process() choose wrong task. Signed-off-by: KOSAKI Motohiro Cc: Paul Menage Cc: David Rientjes Cc: KAMEZAWA Hiroyuki Cc: Rik van Riel Cc: Oleg Nesterov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/sched.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 899d7304d594..17e9a8e9a51d 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -639,6 +639,8 @@ struct signal_struct { unsigned audit_tty; struct tty_audit_buf *tty_audit_buf; #endif + + int oom_adj; /* OOM kill score adjustment (bit shift) */ }; /* Context switch must be unlocked if interrupts are to be enabled */ @@ -1221,7 +1223,6 @@ struct task_struct { * a short time */ unsigned char fpu_counter; - s8 oomkilladj; /* OOM kill score adjustment (bit shift). */ #ifdef CONFIG_BLK_DEV_IO_TRACE unsigned int btrace_seq; #endif -- cgit v1.2.3 From 5f8dcc21211a3d4e3a7a5ca366b469fb88117f61 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Mon, 21 Sep 2009 17:03:19 -0700 Subject: page-allocator: split per-cpu list into one-list-per-migrate-type The following two patches remove searching in the page allocator fast-path by maintaining multiple free-lists in the per-cpu structure. At the time the search was introduced, increasing the per-cpu structures would waste a lot of memory as per-cpu structures were statically allocated at compile-time. This is no longer the case. The patches are as follows. They are based on mmotm-2009-08-27. Patch 1 adds multiple lists to struct per_cpu_pages, one per migratetype that can be stored on the PCP lists. Patch 2 notes that the pcpu drain path check empty lists multiple times. The patch reduces the number of checks by maintaining a count of free lists encountered. Lists containing pages will then free multiple pages in batch The patches were tested with kernbench, netperf udp/tcp, hackbench and sysbench. The netperf tests were not bound to any CPU in particular and were run such that the results should be 99% confidence that the reported results are within 1% of the estimated mean. sysbench was run with a postgres background and read-only tests. Similar to netperf, it was run multiple times so that it's 99% confidence results are within 1%. The patches were tested on x86, x86-64 and ppc64 as x86: Intel Pentium D 3GHz with 8G RAM (no-brand machine) kernbench - No significant difference, variance well within noise netperf-udp - 1.34% to 2.28% gain netperf-tcp - 0.45% to 1.22% gain hackbench - Small variances, very close to noise sysbench - Very small gains x86-64: AMD Phenom 9950 1.3GHz with 8G RAM (no-brand machine) kernbench - No significant difference, variance well within noise netperf-udp - 1.83% to 10.42% gains netperf-tcp - No conclusive until buffer >= PAGE_SIZE 4096 +15.83% 8192 + 0.34% (not significant) 16384 + 1% hackbench - Small gains, very close to noise sysbench - 0.79% to 1.6% gain ppc64: PPC970MP 2.5GHz with 10GB RAM (it's a terrasoft powerstation) kernbench - No significant difference, variance well within noise netperf-udp - 2-3% gain for almost all buffer sizes tested netperf-tcp - losses on small buffers, gains on larger buffers possibly indicates some bad caching effect. hackbench - No significant difference sysbench - 2-4% gain This patch: Currently the per-cpu page allocator searches the PCP list for pages of the correct migrate-type to reduce the possibility of pages being inappropriate placed from a fragmentation perspective. This search is potentially expensive in a fast-path and undesirable. Splitting the per-cpu list into multiple lists increases the size of a per-cpu structure and this was potentially a major problem at the time the search was introduced. These problem has been mitigated as now only the necessary number of structures is allocated for the running system. This patch replaces a list search in the per-cpu allocator with one list per migrate type. The potential snag with this approach is when bulk freeing pages. We round-robin free pages based on migrate type which has little bearing on the cache hotness of the page and potentially checks empty lists repeatedly in the event the majority of PCP pages are of one type. Signed-off-by: Mel Gorman Acked-by: Nick Piggin Cc: Christoph Lameter Cc: Minchan Kim Cc: Pekka Enberg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmzone.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index c188ea624c74..652ef01be582 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -38,6 +38,7 @@ #define MIGRATE_UNMOVABLE 0 #define MIGRATE_RECLAIMABLE 1 #define MIGRATE_MOVABLE 2 +#define MIGRATE_PCPTYPES 3 /* the number of types on the pcp lists */ #define MIGRATE_RESERVE 3 #define MIGRATE_ISOLATE 4 /* can't allocate from here */ #define MIGRATE_TYPES 5 @@ -169,7 +170,9 @@ struct per_cpu_pages { int count; /* number of pages in the list */ int high; /* high watermark, emptying needed */ int batch; /* chunk size for buddy add/remove */ - struct list_head list; /* the list of pages */ + + /* Lists of pages, one per migrate type stored on the pcp-lists */ + struct list_head lists[MIGRATE_PCPTYPES]; }; struct per_cpu_pageset { -- cgit v1.2.3 From f3e8fccd06d27773186a0094371daf2d84c79469 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 21 Sep 2009 17:03:25 -0700 Subject: mm: add get_dump_page In preparation for the next patch, add a simple get_dump_page(addr) interface for the CONFIG_ELF_CORE dumpers to use, instead of calling get_user_pages() directly. They're not interested in errors: they just want to use holes as much as possible, to save space and make sure that the data is aligned where the headers said it would be. Oh, and don't use that horrid DUMP_SEEK(off) macro! Signed-off-by: Hugh Dickins Acked-by: Rik van Riel Cc: KAMEZAWA Hiroyuki Cc: KOSAKI Motohiro Cc: Nick Piggin Cc: Mel Gorman Cc: Minchan Kim Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mm.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index 19ff81c49ba6..e41795bba95d 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -817,6 +817,7 @@ int get_user_pages(struct task_struct *tsk, struct mm_struct *mm, struct page **pages, struct vm_area_struct **vmas); int get_user_pages_fast(unsigned long start, int nr_pages, int write, struct page **pages); +struct page *get_dump_page(unsigned long addr); extern int try_to_release_page(struct page * page, gfp_t gfp_mask); extern void do_invalidatepage(struct page *page, unsigned long offset); -- cgit v1.2.3 From 8e4b9a60718970bbc02dfd3abd0b956ab65af231 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 21 Sep 2009 17:03:26 -0700 Subject: mm: FOLL_DUMP replace FOLL_ANON The "FOLL_ANON optimization" and its use_zero_page() test have caused confusion and bugs: why does it test VM_SHARED? for the very good but unsatisfying reason that VMware crashed without. As we look to maybe reinstating anonymous use of the ZERO_PAGE, we need to sort this out. Easily done: it's silly for __get_user_pages() and follow_page() to be guessing whether it's safe to assume that they're being used for a coredump (which can take a shortcut snapshot where other uses must handle a fault) - just tell them with GUP_FLAGS_DUMP and FOLL_DUMP. get_dump_page() doesn't even want a ZERO_PAGE: an error suits fine. Signed-off-by: Hugh Dickins Acked-by: Rik van Riel Acked-by: Mel Gorman Reviewed-by: Minchan Kim Cc: KAMEZAWA Hiroyuki Cc: KOSAKI Motohiro Cc: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index e41795bba95d..45ee5b5a343d 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1231,7 +1231,7 @@ struct page *follow_page(struct vm_area_struct *, unsigned long address, #define FOLL_WRITE 0x01 /* check pte is writable */ #define FOLL_TOUCH 0x02 /* mark page accessed */ #define FOLL_GET 0x04 /* do get_page on page */ -#define FOLL_ANON 0x08 /* give ZERO_PAGE if no pgtable */ +#define FOLL_DUMP 0x08 /* give error on hole if it would be zero */ typedef int (*pte_fn_t)(pte_t *pte, pgtable_t token, unsigned long addr, void *data); -- cgit v1.2.3 From 2a15efc953b26ad57d7d38b9e6782d57e53b4ab2 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 21 Sep 2009 17:03:27 -0700 Subject: mm: follow_hugetlb_page flags follow_hugetlb_page() shouldn't be guessing about the coredump case either: pass the foll_flags down to it, instead of just the write bit. Remove that obscure huge_zeropage_ok() test. The decision is easy, though unlike the non-huge case - here vm_ops->fault is always set. But we know that a fault would serve up zeroes, unless there's already a hugetlbfs pagecache page to back the range. (Alternatively, since hugetlb pages aren't swapped out under pressure, you could save more dump space by arguing that a page not yet faulted into this process cannot be relevant to the dump; but that would be more surprising.) Signed-off-by: Hugh Dickins Acked-by: Rik van Riel Cc: KAMEZAWA Hiroyuki Cc: KOSAKI Motohiro Cc: Nick Piggin Cc: Mel Gorman Cc: Minchan Kim Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/hugetlb.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h index 16cdb75a543a..e7f0fabfa1c2 100644 --- a/include/linux/hugetlb.h +++ b/include/linux/hugetlb.h @@ -24,7 +24,9 @@ int hugetlb_sysctl_handler(struct ctl_table *, int, struct file *, void __user * int hugetlb_overcommit_handler(struct ctl_table *, int, struct file *, void __user *, size_t *, loff_t *); int hugetlb_treat_movable_handler(struct ctl_table *, int, struct file *, void __user *, size_t *, loff_t *); int copy_hugetlb_page_range(struct mm_struct *, struct mm_struct *, struct vm_area_struct *); -int follow_hugetlb_page(struct mm_struct *, struct vm_area_struct *, struct page **, struct vm_area_struct **, unsigned long *, int *, int, int); +int follow_hugetlb_page(struct mm_struct *, struct vm_area_struct *, + struct page **, struct vm_area_struct **, + unsigned long *, int *, int, unsigned int flags); void unmap_hugepage_range(struct vm_area_struct *, unsigned long, unsigned long, struct page *); void __unmap_hugepage_range(struct vm_area_struct *, -- cgit v1.2.3 From 58fa879e1e640a1856f736b418984ebeccee1c95 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 21 Sep 2009 17:03:31 -0700 Subject: mm: FOLL flags for GUP flags __get_user_pages() has been taking its own GUP flags, then processing them into FOLL flags for follow_page(). Though oddly named, the FOLL flags are more widely used, so pass them to __get_user_pages() now. Sorry, VM flags, VM_FAULT flags and FAULT_FLAGs are still distinct. (The patch to __get_user_pages() looks peculiar, with both gup_flags and foll_flags: the gup_flags remain constant; but as before there's an exceptional case, out of scope of the patch, in which foll_flags per page have FOLL_WRITE masked off.) Signed-off-by: Hugh Dickins Cc: Rik van Riel Cc: KAMEZAWA Hiroyuki Cc: KOSAKI Motohiro Cc: Nick Piggin Cc: Mel Gorman Cc: Minchan Kim Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mm.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index 45ee5b5a343d..5409eced7aae 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1232,6 +1232,7 @@ struct page *follow_page(struct vm_area_struct *, unsigned long address, #define FOLL_TOUCH 0x02 /* mark page accessed */ #define FOLL_GET 0x04 /* do get_page on page */ #define FOLL_DUMP 0x08 /* give error on hole if it would be zero */ +#define FOLL_FORCE 0x10 /* get_user_pages read/write w/o permission */ typedef int (*pte_fn_t)(pte_t *pte, pgtable_t token, unsigned long addr, void *data); -- cgit v1.2.3 From 3f96b79ad96263cc0ece7bb340cddf9b2ddfb1b3 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 21 Sep 2009 17:03:37 -0700 Subject: tmpfs: depend on shmem CONFIG_SHMEM off gives you (ramfs masquerading as) tmpfs, even when CONFIG_TMPFS is off: that's a little anomalous, and I'd intended to make more sense of it by removing CONFIG_TMPFS altogether, always enabling its code when CONFIG_SHMEM; but so many defconfigs have CONFIG_SHMEM on CONFIG_TMPFS off that we'd better leave that as is. But there is no point in asking for CONFIG_TMPFS if CONFIG_SHMEM is off: make TMPFS depend on SHMEM, which also prevents TMPFS_POSIX_ACL shmem_acl.o being pointlessly built into the kernel when SHMEM is off. And a selfish change, to prevent the world from being rebuilt when I switch between CONFIG_SHMEM on and off: the only CONFIG_SHMEM in the header files is mm.h shmem_lock() - give that a shmem.c stub instead. Signed-off-by: Hugh Dickins Acked-by: Matt Mackall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mm.h | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index 5409eced7aae..5946e2ff9fe8 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -702,17 +702,8 @@ extern void pagefault_out_of_memory(void); extern void show_free_areas(void); -#ifdef CONFIG_SHMEM -extern int shmem_lock(struct file *file, int lock, struct user_struct *user); -#else -static inline int shmem_lock(struct file *file, int lock, - struct user_struct *user) -{ - return 0; -} -#endif +int shmem_lock(struct file *file, int lock, struct user_struct *user); struct file *shmem_file_setup(const char *name, loff_t size, unsigned long flags); - int shmem_zero_setup(struct vm_area_struct *); #ifndef CONFIG_MMU -- cgit v1.2.3 From 6bfde05bf5c9682e255c6a2c669dc80f91af6296 Mon Sep 17 00:00:00 2001 From: Eric B Munson Date: Mon, 21 Sep 2009 17:03:43 -0700 Subject: hugetlbfs: allow the creation of files suitable for MAP_PRIVATE on the vfs internal mount This patchset adds a flag to mmap that allows the user to request that an anonymous mapping be backed with huge pages. This mapping will borrow functionality from the huge page shm code to create a file on the kernel internal mount and use it to approximate an anonymous mapping. The MAP_HUGETLB flag is a modifier to MAP_ANONYMOUS and will not work without both flags being preset. A new flag is necessary because there is no other way to hook into huge pages without creating a file on a hugetlbfs mount which wouldn't be MAP_ANONYMOUS. To userspace, this mapping will behave just like an anonymous mapping because the file is not accessible outside of the kernel. This patchset is meant to simplify the programming model. Presently there is a large chunk of boiler platecode, contained in libhugetlbfs, required to create private, hugepage backed mappings. This patch set would allow use of hugepages without linking to libhugetlbfs or having hugetblfs mounted. Unification of the VM code would provide these same benefits, but it has been resisted each time that it has been suggested for several reasons: it would break PAGE_SIZE assumptions across the kernel, it makes page-table abstractions really expensive, and it does not provide any benefit on architectures that do not support huge pages, incurring fast path penalties without providing any benefit on these architectures. This patch: There are two means of creating mappings backed by huge pages: 1. mmap() a file created on hugetlbfs 2. Use shm which creates a file on an internal mount which essentially maps it MAP_SHARED The internal mount is only used for shared mappings but there is very little that stops it being used for private mappings. This patch extends hugetlbfs_file_setup() to deal with the creation of files that will be mapped MAP_PRIVATE on the internal hugetlbfs mount. This extended API is used in a subsequent patch to implement the MAP_HUGETLB mmap() flag. Signed-off-by: Eric Munson Acked-by: David Rientjes Cc: Mel Gorman Cc: Adam Litke Cc: David Gibson Cc: Lee Schermerhorn Cc: Nick Piggin Cc: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/hugetlb.h | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h index e7f0fabfa1c2..f6505ad86657 100644 --- a/include/linux/hugetlb.h +++ b/include/linux/hugetlb.h @@ -112,6 +112,14 @@ static inline void hugetlb_report_meminfo(struct seq_file *m) #endif /* !CONFIG_HUGETLB_PAGE */ +enum { + /* + * The file will be used as an shm file so shmfs accounting rules + * apply + */ + HUGETLB_SHMFS_INODE = 1, +}; + #ifdef CONFIG_HUGETLBFS struct hugetlbfs_config { uid_t uid; @@ -150,7 +158,7 @@ static inline struct hugetlbfs_sb_info *HUGETLBFS_SB(struct super_block *sb) extern const struct file_operations hugetlbfs_file_operations; extern struct vm_operations_struct hugetlb_vm_ops; struct file *hugetlb_file_setup(const char *name, size_t size, int acct, - struct user_struct **user); + struct user_struct **user, int creat_flags); int hugetlb_get_quota(struct address_space *mapping, long delta); void hugetlb_put_quota(struct address_space *mapping, long delta); @@ -172,7 +180,7 @@ static inline void set_file_hugepages(struct file *file) #define is_file_hugepages(file) 0 #define set_file_hugepages(file) BUG() -#define hugetlb_file_setup(name,size,acct,user) ERR_PTR(-ENOSYS) +#define hugetlb_file_setup(name,size,acct,user,creat) ERR_PTR(-ENOSYS) #endif /* !CONFIG_HUGETLBFS */ -- cgit v1.2.3 From 4e52780d41a741fb4861ae1df2413dd816ec11b1 Mon Sep 17 00:00:00 2001 From: Eric B Munson Date: Mon, 21 Sep 2009 17:03:47 -0700 Subject: hugetlb: add MAP_HUGETLB for mmaping pseudo-anonymous huge page regions Add a flag for mmap that will be used to request a huge page region that will look like anonymous memory to userspace. This is accomplished by using a file on the internal vfsmount. MAP_HUGETLB is a modifier of MAP_ANONYMOUS and so must be specified with it. The region will behave the same as a MAP_ANONYMOUS region using small pages. [akpm@linux-foundation.org: fix arch definitions of MAP_HUGETLB] Signed-off-by: Eric B Munson Acked-by: David Rientjes Cc: Mel Gorman Cc: Adam Litke Cc: David Gibson Cc: Lee Schermerhorn Cc: Nick Piggin Cc: Hugh Dickins Cc: Arnd Bergmann Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/hugetlb.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h index f6505ad86657..176e7ee73eff 100644 --- a/include/linux/hugetlb.h +++ b/include/linux/hugetlb.h @@ -112,12 +112,19 @@ static inline void hugetlb_report_meminfo(struct seq_file *m) #endif /* !CONFIG_HUGETLB_PAGE */ +#define HUGETLB_ANON_FILE "anon_hugepage" + enum { /* * The file will be used as an shm file so shmfs accounting rules * apply */ HUGETLB_SHMFS_INODE = 1, + /* + * The file is being created on the internal vfs mount and shmfs + * accounting rules do not apply + */ + HUGETLB_ANONHUGE_INODE = 2, }; #ifdef CONFIG_HUGETLBFS -- cgit v1.2.3 From 3d2d827f5ca5e32816194119d5c980c7e04474a6 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Mon, 21 Sep 2009 17:03:51 -0700 Subject: mm: move use_mm/unuse_mm from aio.c to mm/ Anyone who wants to do copy to/from user from a kernel thread, needs use_mm (like what fs/aio has). Move that into mm/, to make reusing and exporting easier down the line, and make aio use it. Next intended user, besides aio, will be vhost-net. Acked-by: Andrea Arcangeli Signed-off-by: Michael S. Tsirkin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmu_context.h | 9 +++++++++ 1 file changed, 9 insertions(+) create mode 100644 include/linux/mmu_context.h (limited to 'include/linux') diff --git a/include/linux/mmu_context.h b/include/linux/mmu_context.h new file mode 100644 index 000000000000..70fffeba7495 --- /dev/null +++ b/include/linux/mmu_context.h @@ -0,0 +1,9 @@ +#ifndef _LINUX_MMU_CONTEXT_H +#define _LINUX_MMU_CONTEXT_H + +struct mm_struct; + +void use_mm(struct mm_struct *mm); +void unuse_mm(struct mm_struct *mm); + +#endif -- cgit v1.2.3 From 69d25870f20c4b2563304f2b79c5300dd60a067e Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Mon, 21 Sep 2009 17:04:08 -0700 Subject: cpuidle: fix the menu governor to boost IO performance Fix the menu idle governor which balances power savings, energy efficiency and performance impact. The reason for a reworked governor is that there have been serious performance issues reported with the existing code on Nehalem server systems. To show this I'm sure Andrew wants to see benchmark results: (benchmark is "fio", "no cstates" is using "idle=poll") no cstates current linux new algorithm 1 disk 107 Mb/s 85 Mb/s 105 Mb/s 2 disks 215 Mb/s 123 Mb/s 209 Mb/s 12 disks 590 Mb/s 320 Mb/s 585 Mb/s In various power benchmark measurements, no degredation was found by our measurement&diagnostics team. Obviously a small percentage more power was used in the "fio" benchmark, due to the much higher performance. While it would be a novel idea to describe the new algorithm in this commit message, I cheaped out and described it in comments in the code instead. [changes since first post: spelling fixes from akpm, review feedback, folded menu-tng into menu.c] Signed-off-by: Arjan van de Ven Cc: Venkatesh Pallipadi Cc: Len Brown Cc: Ingo Molnar Cc: Peter Zijlstra Cc: Yanmin Zhang Acked-by: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/sched.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 17e9a8e9a51d..97b10da0a3ea 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -140,6 +140,10 @@ extern int nr_processes(void); extern unsigned long nr_running(void); extern unsigned long nr_uninterruptible(void); extern unsigned long nr_iowait(void); +extern unsigned long nr_iowait_cpu(void); +extern unsigned long this_cpu_load(void); + + extern void calc_global_load(void); extern u64 cpu_nr_migrations(int cpu); -- cgit v1.2.3 From e6de3988aa52debb25a427d085061f3bf1181d54 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Mon, 21 Sep 2009 17:04:30 -0700 Subject: flex_array: add flex_array_clear function Add a new function to the flex_array API: int flex_array_clear(struct flex_array *fa, unsigned int element_nr) This function will zero the element at element_nr in the flex_array. Although this is equivalent to using flex_array_put() and passing a pointer to zero'd memory, flex_array_clear() does not require such a pointer to memory that would most likely need to be allocated on the caller's stack which could be significantly large depending on element_size. Signed-off-by: David Rientjes Cc: Dave Hansen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/flex_array.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/flex_array.h b/include/linux/flex_array.h index 45ff18491514..3887b21f883f 100644 --- a/include/linux/flex_array.h +++ b/include/linux/flex_array.h @@ -44,6 +44,7 @@ void flex_array_free(struct flex_array *fa); void flex_array_free_parts(struct flex_array *fa); int flex_array_put(struct flex_array *fa, unsigned int element_nr, void *src, gfp_t flags); +int flex_array_clear(struct flex_array *fa, unsigned int element_nr); void *flex_array_get(struct flex_array *fa, unsigned int element_nr); #endif /* _FLEX_ARRAY_H */ -- cgit v1.2.3 From 19da3dd157f8db6fe727ff268dab4791d55a6371 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Mon, 21 Sep 2009 17:04:31 -0700 Subject: flex_array: poison free elements Newly initialized flex_array's and/or flex_array_part's are now poisoned with a new poison value, FLEX_ARRAY_FREE. It's value is similar to POISON_FREE used in the various slab allocators, but is different to distinguish between flex array's poisoned kmem and slab allocator poisoned kmem. This will allow us to identify flex_array_part's that only contain free elements (and free them with an addition to the flex_array API). This could also be extended in the future to identify `get' uses on elements that have not been `put'. If __GFP_ZERO is passed for a part's gfp mask, the poisoning is avoided. These elements are considered to be in-use since they have been initialized. Signed-off-by: David Rientjes Cc: Dave Hansen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/poison.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/poison.h b/include/linux/poison.h index 6729f7dcd60e..7fc194aef8c2 100644 --- a/include/linux/poison.h +++ b/include/linux/poison.h @@ -65,6 +65,9 @@ #define MUTEX_DEBUG_INIT 0x11 #define MUTEX_DEBUG_FREE 0x22 +/********** lib/flex_array.c **********/ +#define FLEX_ARRAY_FREE 0x6c /* for use-after-free poisoning */ + /********** security/ **********/ #define KEY_DESTROY 0xbd -- cgit v1.2.3 From 4af5a2f770cc8575840ccb1514ec76ecb592985c Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Mon, 21 Sep 2009 17:04:31 -0700 Subject: flex_array: add flex_array_shrink function Add a new function to the flex_array API: int flex_array_shrink(struct flex_array *fa) This function will free all unused second-level pages. Since elements are now poisoned if they are not allocated with __GFP_ZERO, it's possible to identify parts that consist solely of unused elements. flex_array_shrink() returns the number of pages freed. Signed-off-by: David Rientjes Cc: Dave Hansen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/flex_array.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/flex_array.h b/include/linux/flex_array.h index 3887b21f883f..f12401e485fe 100644 --- a/include/linux/flex_array.h +++ b/include/linux/flex_array.h @@ -46,5 +46,6 @@ int flex_array_put(struct flex_array *fa, unsigned int element_nr, void *src, gfp_t flags); int flex_array_clear(struct flex_array *fa, unsigned int element_nr); void *flex_array_get(struct flex_array *fa, unsigned int element_nr); +int flex_array_shrink(struct flex_array *fa); #endif /* _FLEX_ARRAY_H */ -- cgit v1.2.3 From 45b588d6e5cc172704bac0c998ce54873b149b22 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Mon, 21 Sep 2009 17:04:33 -0700 Subject: flex_array: introduce DEFINE_FLEX_ARRAY FLEX_ARRAY_INIT(element_size, total_nr_elements) cannot determine if either parameter is valid, so flex arrays which are statically allocated with this interface can easily become corrupted or reference beyond its allocated memory. This removes FLEX_ARRAY_INIT() as a struct flex_array initializer since no initializer may perform the required checking. Instead, the array is now defined with a new interface: DEFINE_FLEX_ARRAY(name, element_size, total_nr_elements) This may be prefixed with `static' for file scope. This interface includes compile-time checking of the parameters to ensure they are valid. Since the validity of both element_size and total_nr_elements depend on FLEX_ARRAY_BASE_SIZE and FLEX_ARRAY_PART_SIZE, the kernel build will fail if either of these predefined values changes such that the array parameters are no longer valid. Since BUILD_BUG_ON() requires compile time constants, several of the static inline functions that were once local to lib/flex_array.c had to be moved to include/linux/flex_array.h. Signed-off-by: David Rientjes Acked-by: Dave Hansen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/flex_array.h | 30 ++++++++++++++++++++++++++---- 1 file changed, 26 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/flex_array.h b/include/linux/flex_array.h index f12401e485fe..1d747f72298b 100644 --- a/include/linux/flex_array.h +++ b/include/linux/flex_array.h @@ -31,10 +31,32 @@ struct flex_array { }; }; -#define FLEX_ARRAY_INIT(size, total) { { {\ - .element_size = (size), \ - .total_nr_elements = (total), \ -} } } +/* Number of bytes left in base struct flex_array, excluding metadata */ +#define FLEX_ARRAY_BASE_BYTES_LEFT \ + (FLEX_ARRAY_BASE_SIZE - offsetof(struct flex_array, parts)) + +/* Number of pointers in base to struct flex_array_part pages */ +#define FLEX_ARRAY_NR_BASE_PTRS \ + (FLEX_ARRAY_BASE_BYTES_LEFT / sizeof(struct flex_array_part *)) + +/* Number of elements of size that fit in struct flex_array_part */ +#define FLEX_ARRAY_ELEMENTS_PER_PART(size) \ + (FLEX_ARRAY_PART_SIZE / size) + +/* + * Defines a statically allocated flex array and ensures its parameters are + * valid. + */ +#define DEFINE_FLEX_ARRAY(__arrayname, __element_size, __total) \ + struct flex_array __arrayname = { { { \ + .element_size = (__element_size), \ + .total_nr_elements = (__total), \ + } } }; \ + static inline void __arrayname##_invalid_parameter(void) \ + { \ + BUILD_BUG_ON((__total) > FLEX_ARRAY_NR_BASE_PTRS * \ + FLEX_ARRAY_ELEMENTS_PER_PART(__element_size)); \ + } struct flex_array *flex_array_alloc(int element_size, unsigned int total, gfp_t flags); -- cgit v1.2.3 From 0ec48915e8bbb37dea3df85c41e4c3498b95664b Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Mon, 21 Sep 2009 17:04:42 -0700 Subject: lis3: fix typo Bit 0x80 in CTRL_REG3 is an ACTIVE_LOW rather than an ACTIVE_HIGH function, I got that wrong during my last change. Signed-off-by: Daniel Mack Acked-by: Pavel Machek Cc: Eric Piel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/lis3lv02d.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/lis3lv02d.h b/include/linux/lis3lv02d.h index ad651f4e45ac..113778b5df36 100644 --- a/include/linux/lis3lv02d.h +++ b/include/linux/lis3lv02d.h @@ -32,7 +32,7 @@ struct lis3lv02d_platform_data { #define LIS3_IRQ2_DATA_READY (4 << 3) #define LIS3_IRQ2_CLICK (7 << 3) #define LIS3_IRQ_OPEN_DRAIN (1 << 6) -#define LIS3_IRQ_ACTIVE_HIGH (1 << 7) +#define LIS3_IRQ_ACTIVE_LOW (1 << 7) unsigned char irq_cfg; }; -- cgit v1.2.3 From 8873c33483e62988ed886230aab71ef4c678f710 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Mon, 21 Sep 2009 17:04:43 -0700 Subject: lis3: add free-fall/wakeup function via platform_data This offers a way for platforms to define flags and thresholds for the free-fall/wakeup functions of the lis302d chips. More registers needed to be seperated as they are specific to the Signed-off-by: Daniel Mack Acked-by: Pavel Machek Cc: Eric Piel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/lis3lv02d.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/lis3lv02d.h b/include/linux/lis3lv02d.h index 113778b5df36..3cc2f2c53e4c 100644 --- a/include/linux/lis3lv02d.h +++ b/include/linux/lis3lv02d.h @@ -34,6 +34,15 @@ struct lis3lv02d_platform_data { #define LIS3_IRQ_OPEN_DRAIN (1 << 6) #define LIS3_IRQ_ACTIVE_LOW (1 << 7) unsigned char irq_cfg; + +#define LIS3_WAKEUP_X_LO (1 << 0) +#define LIS3_WAKEUP_X_HI (1 << 1) +#define LIS3_WAKEUP_Y_LO (1 << 2) +#define LIS3_WAKEUP_Y_HI (1 << 3) +#define LIS3_WAKEUP_Z_LO (1 << 4) +#define LIS3_WAKEUP_Z_HI (1 << 5) + unsigned char wakeup_flags; + unsigned char wakeup_thresh; }; #endif /* __LIS3LV02D_H_ */ -- cgit v1.2.3 From abd6633c67925f90775bb74755f9c547e30f1f20 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?David=20H=C3=A4rdeman?= Date: Mon, 21 Sep 2009 17:04:52 -0700 Subject: pnp: add a shutdown method to pnp drivers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The shutdown method is used by the winbond cir driver to setup the hardware for wake-from-S5. Signed-off-by: Bjorn Helgaas Signed-off-by: David Härdeman Cc: Dmitry Torokhov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/pnp.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/pnp.h b/include/linux/pnp.h index b063c7328ba5..fddfafaed024 100644 --- a/include/linux/pnp.h +++ b/include/linux/pnp.h @@ -360,6 +360,7 @@ struct pnp_driver { unsigned int flags; int (*probe) (struct pnp_dev *dev, const struct pnp_device_id *dev_id); void (*remove) (struct pnp_dev *dev); + void (*shutdown) (struct pnp_dev *dev); int (*suspend) (struct pnp_dev *dev, pm_message_t state); int (*resume) (struct pnp_dev *dev); struct device_driver driver; -- cgit v1.2.3 From 6ef297f86b62f187c59475784208f75c2ed8ccd8 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 22 Sep 2009 14:29:36 +0100 Subject: ARM: 5720/1: Move MMCI header to amba include dir This moves the mmci platform data definition struct away from arch/arm/include/asm/mach/mmc.h into the more proper place among the other primecells in include/linux/amba/mmci.h and at the same time renames it to "mmci.h", and also the struct in this file confusingly named mmc_platform_data has been renamed mmci_platform_data for clarity. Cc: Catalin Marinas Signed-off-by: Linus Walleij Signed-off-by: Russell King --- include/linux/amba/mmci.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 include/linux/amba/mmci.h (limited to 'include/linux') diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h new file mode 100644 index 000000000000..6b4241748dda --- /dev/null +++ b/include/linux/amba/mmci.h @@ -0,0 +1,18 @@ +/* + * include/linux/amba/mmci.h + */ +#ifndef AMBA_MMCI_H +#define AMBA_MMCI_H + +#include + +struct mmci_platform_data { + unsigned int ocr_mask; /* available voltages */ + u32 (*translate_vdd)(struct device *, unsigned int); + unsigned int (*status)(struct device *); + int gpio_wp; + int gpio_cd; + unsigned long capabilities; +}; + +#endif -- cgit v1.2.3 From 8cd09a5984c08dafade74c9c1ab4311af2bf2d24 Mon Sep 17 00:00:00 2001 From: Li Hong Date: Tue, 22 Sep 2009 18:00:44 +0800 Subject: tracing: Fix a comment and a trivial format issue in tracepoint.h Fix the tracepoint documentation path in tracepoints headers and a misaligned tabulation. Signed-off-by: Li Hong Cc: Steven Rostedt Cc: Ingo Molnar LKML-Reference: <3a3680030909220300h7cf18849q4d4702b9d4feaa67@mail.gmail.com> Signed-off-by: Frederic Weisbecker --- include/linux/tracepoint.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h index 63a3f7a80580..2aac8a83e89b 100644 --- a/include/linux/tracepoint.h +++ b/include/linux/tracepoint.h @@ -4,7 +4,7 @@ /* * Kernel Tracepoint API. * - * See Documentation/tracepoint.txt. + * See Documentation/trace/tracepoints.txt. * * (C) Copyright 2008 Mathieu Desnoyers * @@ -36,7 +36,7 @@ struct tracepoint { #ifndef DECLARE_TRACE #define TP_PROTO(args...) args -#define TP_ARGS(args...) args +#define TP_ARGS(args...) args #ifdef CONFIG_TRACEPOINTS -- cgit v1.2.3 From ec4756238239f1a331d9fb95bad8b281dad56855 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Tue, 22 Sep 2009 04:00:27 +0000 Subject: smsc95xx: fix transmission where ZLP is expected Usbnet framework assumes USB hardware doesn't handle zero length packets, but SMSC LAN95xx requires these to be sent for correct operation. This patch fixes an easily reproducible tx lockup when sending a frame that results in exactly 512 bytes in a USB transmission (e.g. a UDP frame with 458 data bytes, due to IP headers and our USB headers). It adds an extra flag to usbnet for the hardware driver to indicate that it can handle and requires the zero length packets. This patch should not affect other usbnet users, please also consider for -stable. Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- include/linux/usb/usbnet.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index bb69e256cd16..f81473052059 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -89,6 +89,7 @@ struct driver_info { #define FLAG_FRAMING_AX 0x0040 /* AX88772/178 packets */ #define FLAG_WLAN 0x0080 /* use "wlan%d" names */ #define FLAG_AVOID_UNLINK_URBS 0x0100 /* don't unlink urbs at usbnet_stop() */ +#define FLAG_SEND_ZLP 0x0200 /* hw requires ZLPs are sent */ /* init device ... can sleep, or cause probe() failure */ -- cgit v1.2.3 From 7c329288d72e025db4feac65f0fed95fb3e3ef1c Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 23 Sep 2009 09:52:18 +1000 Subject: vgaarb: make client interface config invariant. Fixes build when VGA_ARB is off. Reported-by: Ingo Molnar Signed-off-by: Ingo Molnar Signed-off-by: Dave Airlie --- include/linux/vgaarb.h | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/vgaarb.h b/include/linux/vgaarb.h index e81c64af80c1..923f9040ea20 100644 --- a/include/linux/vgaarb.h +++ b/include/linux/vgaarb.h @@ -41,7 +41,7 @@ * interrupts at any time. */ extern void vga_set_legacy_decoding(struct pci_dev *pdev, - unsigned int decodes); + unsigned int decodes); /** * vga_get - acquire & locks VGA resources @@ -193,8 +193,17 @@ static inline int vga_conflicts(struct pci_dev *p1, struct pci_dev *p2) * They driver will get a callback when VGA arbitration is first used * by userspace since we some older X servers have issues. */ +#if defined(CONFIG_VGA_ARB) int vga_client_register(struct pci_dev *pdev, void *cookie, void (*irq_set_state)(void *cookie, bool state), unsigned int (*set_vga_decode)(void *cookie, bool state)); +#else +static inline int vga_client_register(struct pci_dev *pdev, void *cookie, + void (*irq_set_state)(void *cookie, bool state), + unsigned int (*set_vga_decode)(void *cookie, bool state)) +{ + return 0; +} +#endif #endif /* LINUX_VGA_H */ -- cgit v1.2.3 From 3c1b27d5043086a485f8526353ae9fe37bfa1065 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Wed, 23 Sep 2009 22:26:31 -0600 Subject: virtio: make add_buf return capacity remaining This API change means that virtio_net can tell how much capacity remains for buffers. It's necessarily fuzzy, since VIRTIO_RING_F_INDIRECT_DESC means we can fit any number of descriptors in one, *if* we can kmalloc. Signed-off-by: Rusty Russell Cc: Dinesh Subhraveti --- include/linux/virtio.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/virtio.h b/include/linux/virtio.h index 4fca4f5440ba..057a2e010758 100644 --- a/include/linux/virtio.h +++ b/include/linux/virtio.h @@ -34,7 +34,7 @@ struct virtqueue { * out_num: the number of sg readable by other side * in_num: the number of sg which are writable (after readable ones) * data: the token identifying the buffer. - * Returns 0 or an error. + * Returns remaining capacity of queue (sg segments) or a negative error. * @kick: update after add_buf * vq: the struct virtqueue * After one or more add_buf calls, invoke this to kick the other side. -- cgit v1.2.3 From 3ca4f5ca73057a617f9444a91022d7127041970a Mon Sep 17 00:00:00 2001 From: Fernando Luis Vazquez Cao Date: Fri, 31 Jul 2009 15:25:56 +0900 Subject: virtio: add virtio IDs file Virtio IDs are spread all over the tree which makes assigning new IDs bothersome. Putting them together should make the process less error-prone. Signed-off-by: Fernando Luis Vazquez Cao Signed-off-by: Rusty Russell --- include/linux/virtio_9p.h | 2 -- include/linux/virtio_balloon.h | 3 --- include/linux/virtio_blk.h | 3 --- include/linux/virtio_console.h | 3 --- include/linux/virtio_ids.h | 17 +++++++++++++++++ include/linux/virtio_net.h | 3 --- include/linux/virtio_rng.h | 3 --- 7 files changed, 17 insertions(+), 17 deletions(-) create mode 100644 include/linux/virtio_ids.h (limited to 'include/linux') diff --git a/include/linux/virtio_9p.h b/include/linux/virtio_9p.h index b3c4a60ceeb3..ea7226a45acb 100644 --- a/include/linux/virtio_9p.h +++ b/include/linux/virtio_9p.h @@ -4,8 +4,6 @@ * compatible drivers/servers. */ #include -/* The ID for virtio console */ -#define VIRTIO_ID_9P 9 /* Maximum number of virtio channels per partition (1 for now) */ #define MAX_9P_CHAN 1 diff --git a/include/linux/virtio_balloon.h b/include/linux/virtio_balloon.h index 8726ff77763e..09d730085060 100644 --- a/include/linux/virtio_balloon.h +++ b/include/linux/virtio_balloon.h @@ -4,9 +4,6 @@ * compatible drivers/servers. */ #include -/* The ID for virtio_balloon */ -#define VIRTIO_ID_BALLOON 5 - /* The feature bitmap for virtio balloon */ #define VIRTIO_BALLOON_F_MUST_TELL_HOST 0 /* Tell before reclaiming pages */ diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h index 8dab9f2b8832..25fbabfa90d4 100644 --- a/include/linux/virtio_blk.h +++ b/include/linux/virtio_blk.h @@ -5,9 +5,6 @@ #include #include -/* The ID for virtio_block */ -#define VIRTIO_ID_BLOCK 2 - /* Feature bits */ #define VIRTIO_BLK_F_BARRIER 0 /* Does host support barriers? */ #define VIRTIO_BLK_F_SIZE_MAX 1 /* Indicates maximum segment size */ diff --git a/include/linux/virtio_console.h b/include/linux/virtio_console.h index dc161115ae35..b5f519806014 100644 --- a/include/linux/virtio_console.h +++ b/include/linux/virtio_console.h @@ -5,9 +5,6 @@ /* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so * anyone can use the definitions to implement compatible drivers/servers. */ -/* The ID for virtio console */ -#define VIRTIO_ID_CONSOLE 3 - /* Feature bits */ #define VIRTIO_CONSOLE_F_SIZE 0 /* Does host provide console size? */ diff --git a/include/linux/virtio_ids.h b/include/linux/virtio_ids.h new file mode 100644 index 000000000000..06660c0a78d7 --- /dev/null +++ b/include/linux/virtio_ids.h @@ -0,0 +1,17 @@ +#ifndef _LINUX_VIRTIO_IDS_H +#define _LINUX_VIRTIO_IDS_H +/* + * Virtio IDs + * + * This header is BSD licensed so anyone can use the definitions to implement + * compatible drivers/servers. + */ + +#define VIRTIO_ID_NET 1 /* virtio net */ +#define VIRTIO_ID_BLOCK 2 /* virtio block */ +#define VIRTIO_ID_CONSOLE 3 /* virtio console */ +#define VIRTIO_ID_RNG 4 /* virtio ring */ +#define VIRTIO_ID_BALLOON 5 /* virtio balloon */ +#define VIRTIO_ID_9P 9 /* 9p virtio console */ + +#endif /* _LINUX_VIRTIO_IDS_H */ diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h index d8dd539c9f48..1f41734bbb77 100644 --- a/include/linux/virtio_net.h +++ b/include/linux/virtio_net.h @@ -6,9 +6,6 @@ #include #include -/* The ID for virtio_net */ -#define VIRTIO_ID_NET 1 - /* The feature bitmap for virtio net */ #define VIRTIO_NET_F_CSUM 0 /* Host handles pkts w/ partial csum */ #define VIRTIO_NET_F_GUEST_CSUM 1 /* Guest handles pkts w/ partial csum */ diff --git a/include/linux/virtio_rng.h b/include/linux/virtio_rng.h index 1a85dab8a940..48121c3c434b 100644 --- a/include/linux/virtio_rng.h +++ b/include/linux/virtio_rng.h @@ -4,7 +4,4 @@ * compatible drivers/servers. */ #include -/* The ID for virtio_rng */ -#define VIRTIO_ID_RNG 4 - #endif /* _LINUX_VIRTIO_RNG_H */ -- cgit v1.2.3 From f1b0ef062602713c2c7cfa12362d5d90ed01c5f6 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 17 Sep 2009 19:57:42 +0200 Subject: virtio_blk: add support for cache flush Recent qemu has added a VIRTIO_BLK_F_FLUSH flag to advertise that the virtual disk has a volatile write cache that needs to be flushed. In case we see this feature implement tell the Linux block layer about the fact and use the new VIRTIO_BLK_T_FLUSH to flush the cache when required. This allows for an correct and simple implementation of write barriers. Signed-off-by: Christoph Hellwig Signed-off-by: Rusty Russell --- include/linux/virtio_blk.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'include/linux') diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h index 25fbabfa90d4..15cb666581d7 100644 --- a/include/linux/virtio_blk.h +++ b/include/linux/virtio_blk.h @@ -14,6 +14,7 @@ #define VIRTIO_BLK_F_BLK_SIZE 6 /* Block size of disk is available*/ #define VIRTIO_BLK_F_SCSI 7 /* Supports scsi command passthru */ #define VIRTIO_BLK_F_IDENTIFY 8 /* ATA IDENTIFY supported */ +#define VIRTIO_BLK_F_FLUSH 9 /* Cache flush command support */ #define VIRTIO_BLK_ID_BYTES (sizeof(__u16[256])) /* IDENTIFY DATA */ @@ -35,6 +36,17 @@ struct virtio_blk_config { __u8 identify[VIRTIO_BLK_ID_BYTES]; } __attribute__((packed)); +/* + * Command types + * + * Usage is a bit tricky as some bits are used as flags and some are not. + * + * Rules: + * VIRTIO_BLK_T_OUT may be combined with VIRTIO_BLK_T_SCSI_CMD or + * VIRTIO_BLK_T_BARRIER. VIRTIO_BLK_T_FLUSH is a command of its own + * and may not be combined with any of the other flags. + */ + /* These two define direction. */ #define VIRTIO_BLK_T_IN 0 #define VIRTIO_BLK_T_OUT 1 @@ -42,6 +54,9 @@ struct virtio_blk_config { /* This bit says it's a scsi command, not an actual read or write. */ #define VIRTIO_BLK_T_SCSI_CMD 2 +/* Cache flush command */ +#define VIRTIO_BLK_T_FLUSH 4 + /* Barrier before this op. */ #define VIRTIO_BLK_T_BARRIER 0x80000000 -- cgit v1.2.3 From 4e9e92003529e5c7bb11281f7c2c9b3fe8858403 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Thu, 11 Jun 2009 08:53:20 -0600 Subject: USB: usbmon: end ugly tricks with DMA peeking This patch fixes crashes when usbmon attempts to access GART aperture. The old code attempted to take a bus address and convert it into a virtual address, which clearly was impossible on systems with actual IOMMUs. Let us not persist in this foolishness, and use transfer_buffer in all cases instead. I think downsides are negligible. The ones I see are: - A driver may pass an address of one buffer down as transfer_buffer, and entirely different entity mapped for DMA, resulting in misleading output of usbmon. Note, however, that PIO based controllers would do transfer the same data that usbmon sees here. - Out of tree drivers may crash usbmon if they store garbage in transfer_buffer. I inspected the in-tree drivers, and clarified the documentation in comments. - Drivers that use get_user_pages will not be possible to monitor. I only found one driver with this problem (drivers/staging/rspiusb). - Same happens with with usb_storage transferring from highmem, but it works fine on 64-bit systems, so I think it's not a concern. At least we don't crash anymore. Why didn't we do this in 2.6.10? That's because back in those days it was popular not to fill in transfer_buffer, so almost all traffic would be invisible (e.g. all of HID was like that). But now, the tree is almost 100% PIO friendly, so we can do the right thing at last. Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman --- include/linux/usb.h | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb.h b/include/linux/usb.h index 19fabc487beb..3b45a0d27b80 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -1036,9 +1036,10 @@ typedef void (*usb_complete_t)(struct urb *); * @transfer_flags: A variety of flags may be used to affect how URB * submission, unlinking, or operation are handled. Different * kinds of URB can use different flags. - * @transfer_buffer: This identifies the buffer to (or from) which - * the I/O request will be performed (unless URB_NO_TRANSFER_DMA_MAP - * is set). This buffer must be suitable for DMA; allocate it with + * @transfer_buffer: This identifies the buffer to (or from) which the I/O + * request will be performed unless URB_NO_TRANSFER_DMA_MAP is set + * (however, do not leave garbage in transfer_buffer even then). + * This buffer must be suitable for DMA; allocate it with * kmalloc() or equivalent. For transfers to "in" endpoints, contents * of this buffer will be modified. This buffer is used for the data * stage of control transfers. @@ -1104,9 +1105,15 @@ typedef void (*usb_complete_t)(struct urb *); * allocate a DMA buffer with usb_buffer_alloc() or call usb_buffer_map(). * When these transfer flags are provided, host controller drivers will * attempt to use the dma addresses found in the transfer_dma and/or - * setup_dma fields rather than determining a dma address themselves. (Note - * that transfer_buffer and setup_packet must still be set because not all - * host controllers use DMA, nor do virtual root hubs). + * setup_dma fields rather than determining a dma address themselves. + * + * Note that transfer_buffer must still be set if the controller + * does not support DMA (as indicated by bus.uses_dma) and when talking + * to root hub. If you have to trasfer between highmem zone and the device + * on such controller, create a bounce buffer or bail out with an error. + * If transfer_buffer cannot be set (is in highmem) and the controller is DMA + * capable, assign NULL to it, so that usbmon knows not to use the value. + * The setup_packet must always be set, so it cannot be located in highmem. * * Initialization: * -- cgit v1.2.3 From 85e08ca54c5c203cd2638f0fc8fa899a539f6254 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sun, 21 Jun 2009 23:19:23 +0200 Subject: USB: Move endpoint sync type definitions from usb/audio.h to usb/ch9.h And use the new definitions in the USB Audio Class gadget driver. Signed-off-by: Laurent Pinchart Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/audio.h | 10 ---------- include/linux/usb/ch9.h | 6 ++++++ 2 files changed, 6 insertions(+), 10 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h index b5744bc218ab..bcf4fb4f5e82 100644 --- a/include/linux/usb/audio.h +++ b/include/linux/usb/audio.h @@ -46,12 +46,6 @@ #define MIDI_IN_JACK 0x02 #define MIDI_OUT_JACK 0x03 -/* endpoint attributes */ -#define EP_ATTR_MASK 0x0c -#define EP_ATTR_ASYNC 0x04 -#define EP_ATTR_ADAPTIVE 0x08 -#define EP_ATTR_SYNC 0x0c - /* cs endpoint attributes */ #define EP_CS_ATTR_SAMPLE_RATE 0x01 #define EP_CS_ATTR_PITCH_CONTROL 0x02 @@ -244,10 +238,6 @@ struct usb_as_formate_type_i_discrete_descriptor_##n { \ #define USB_AS_FORMAT_TYPE_II 0x2 #define USB_AS_FORMAT_TYPE_III 0x3 -#define USB_AS_ENDPOINT_ASYNC (1 << 2) -#define USB_AS_ENDPOINT_ADAPTIVE (2 << 2) -#define USB_AS_ENDPOINT_SYNC (3 << 2) - struct usb_as_iso_endpoint_descriptor { __u8 bLength; /* in bytes: 7 */ __u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */ diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index 93223638f702..8f8b7411b87b 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -348,6 +348,12 @@ struct usb_endpoint_descriptor { #define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ #define USB_ENDPOINT_DIR_MASK 0x80 +#define USB_ENDPOINT_SYNCTYPE 0x0c +#define USB_ENDPOINT_SYNC_NONE (0 << 2) +#define USB_ENDPOINT_SYNC_ASYNC (1 << 2) +#define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2) +#define USB_ENDPOINT_SYNC_SYNC (3 << 2) + #define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ #define USB_ENDPOINT_XFER_CONTROL 0 #define USB_ENDPOINT_XFER_ISOC 1 -- cgit v1.2.3 From 315ad3028c8aae14891797040f855fc3291a076b Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sun, 21 Jun 2009 23:20:39 +0200 Subject: USB: Move vendor subclass definition from usb/audio.h to usb/ch9.h USB_SUBCLASS_VENDOR_SPEC is common to several USB classes and as such belongs to usb/ch9.h. Signed-off-by: Laurent Pinchart Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/audio.h | 1 - include/linux/usb/ch9.h | 2 ++ 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h index bcf4fb4f5e82..f75092aba02f 100644 --- a/include/linux/usb/audio.h +++ b/include/linux/usb/audio.h @@ -24,7 +24,6 @@ #define USB_SUBCLASS_AUDIOCONTROL 0x01 #define USB_SUBCLASS_AUDIOSTREAMING 0x02 #define USB_SUBCLASS_MIDISTREAMING 0x03 -#define USB_SUBCLASS_VENDOR_SPEC 0xff /* A.5 Audio Class-Specific AC interface Descriptor Subtypes*/ #define HEADER 0x01 diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index 8f8b7411b87b..94012e649d86 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -258,6 +258,8 @@ struct usb_device_descriptor { #define USB_CLASS_APP_SPEC 0xfe #define USB_CLASS_VENDOR_SPEC 0xff +#define USB_SUBCLASS_VENDOR_SPEC 0xff + /*-------------------------------------------------------------------------*/ /* USB_DT_CONFIG: Configuration descriptor information. -- cgit v1.2.3 From 512ad27d8667158747de2e8da8a23e8f50e91856 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sun, 21 Jun 2009 23:23:05 +0200 Subject: USB audio gadget: Prefix all macro definitions with UAC_ in linux/usb/audio.h linux/usb/audio.h is a public header file that includes definitions exported to userspace. To avoid namespace clashes, prefix all macro definitions with UAC_. Existing macros and structures prefixed with USB_AC_ and USB_AS_ are renamed for consistency. Signed-off-by: Laurent Pinchart Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/audio.h | 258 ++++++++++++++++++++++++---------------------- 1 file changed, 132 insertions(+), 126 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h index f75092aba02f..c3edfcb72c34 100644 --- a/include/linux/usb/audio.h +++ b/include/linux/usb/audio.h @@ -25,80 +25,77 @@ #define USB_SUBCLASS_AUDIOSTREAMING 0x02 #define USB_SUBCLASS_MIDISTREAMING 0x03 -/* A.5 Audio Class-Specific AC interface Descriptor Subtypes*/ -#define HEADER 0x01 -#define INPUT_TERMINAL 0x02 -#define OUTPUT_TERMINAL 0x03 -#define MIXER_UNIT 0x04 -#define SELECTOR_UNIT 0x05 -#define FEATURE_UNIT 0x06 -#define PROCESSING_UNIT 0x07 -#define EXTENSION_UNIT 0x08 - -#define AS_GENERAL 0x01 -#define FORMAT_TYPE 0x02 -#define FORMAT_SPECIFIC 0x03 - -#define EP_GENERAL 0x01 - -#define MS_GENERAL 0x01 -#define MIDI_IN_JACK 0x02 -#define MIDI_OUT_JACK 0x03 - -/* cs endpoint attributes */ -#define EP_CS_ATTR_SAMPLE_RATE 0x01 -#define EP_CS_ATTR_PITCH_CONTROL 0x02 -#define EP_CS_ATTR_FILL_MAX 0x80 - -/* Audio Class specific Request Codes */ -#define USB_AUDIO_SET_INTF 0x21 -#define USB_AUDIO_SET_ENDPOINT 0x22 -#define USB_AUDIO_GET_INTF 0xa1 -#define USB_AUDIO_GET_ENDPOINT 0xa2 - -#define SET_ 0x00 -#define GET_ 0x80 - -#define _CUR 0x1 -#define _MIN 0x2 -#define _MAX 0x3 -#define _RES 0x4 -#define _MEM 0x5 - -#define SET_CUR (SET_ | _CUR) -#define GET_CUR (GET_ | _CUR) -#define SET_MIN (SET_ | _MIN) -#define GET_MIN (GET_ | _MIN) -#define SET_MAX (SET_ | _MAX) -#define GET_MAX (GET_ | _MAX) -#define SET_RES (SET_ | _RES) -#define GET_RES (GET_ | _RES) -#define SET_MEM (SET_ | _MEM) -#define GET_MEM (GET_ | _MEM) - -#define GET_STAT 0xff - -#define USB_AC_TERMINAL_UNDEFINED 0x100 -#define USB_AC_TERMINAL_STREAMING 0x101 -#define USB_AC_TERMINAL_VENDOR_SPEC 0x1FF +/* A.5 Audio Class-Specific AC Interface Descriptor Subtypes */ +#define UAC_HEADER 0x01 +#define UAC_INPUT_TERMINAL 0x02 +#define UAC_OUTPUT_TERMINAL 0x03 +#define UAC_MIXER_UNIT 0x04 +#define UAC_SELECTOR_UNIT 0x05 +#define UAC_FEATURE_UNIT 0x06 +#define UAC_PROCESSING_UNIT 0x07 +#define UAC_EXTENSION_UNIT 0x08 + +/* A.6 Audio Class-Specific AS Interface Descriptor Subtypes */ +#define UAC_AS_GENERAL 0x01 +#define UAC_FORMAT_TYPE 0x02 +#define UAC_FORMAT_SPECIFIC 0x03 + +/* A.8 Audio Class-Specific Endpoint Descriptor Subtypes */ +#define UAC_EP_GENERAL 0x01 + +/* A.9 Audio Class-Specific Request Codes */ +#define UAC_SET_ 0x00 +#define UAC_GET_ 0x80 + +#define UAC__CUR 0x1 +#define UAC__MIN 0x2 +#define UAC__MAX 0x3 +#define UAC__RES 0x4 +#define UAC__MEM 0x5 + +#define UAC_SET_CUR (UAC_SET_ | UAC__CUR) +#define UAC_GET_CUR (UAC_GET_ | UAC__CUR) +#define UAC_SET_MIN (UAC_SET_ | UAC__MIN) +#define UAC_GET_MIN (UAC_GET_ | UAC__MIN) +#define UAC_SET_MAX (UAC_SET_ | UAC__MAX) +#define UAC_GET_MAX (UAC_GET_ | UAC__MAX) +#define UAC_SET_RES (UAC_SET_ | UAC__RES) +#define UAC_GET_RES (UAC_GET_ | UAC__RES) +#define UAC_SET_MEM (UAC_SET_ | UAC__MEM) +#define UAC_GET_MEM (UAC_GET_ | UAC__MEM) + +#define UAC_GET_STAT 0xff + +/* MIDI - A.1 MS Class-Specific Interface Descriptor Subtypes */ +#define UAC_MS_HEADER 0x01 +#define UAC_MIDI_IN_JACK 0x02 +#define UAC_MIDI_OUT_JACK 0x03 + +/* MIDI - A.1 MS Class-Specific Endpoint Descriptor Subtypes */ +#define UAC_MS_GENERAL 0x01 + +/* Terminals - 2.1 USB Terminal Types */ +#define UAC_TERMINAL_UNDEFINED 0x100 +#define UAC_TERMINAL_STREAMING 0x101 +#define UAC_TERMINAL_VENDOR_SPEC 0x1FF /* Terminal Control Selectors */ /* 4.3.2 Class-Specific AC Interface Descriptor */ -struct usb_ac_header_descriptor { +struct uac_ac_header_descriptor { __u8 bLength; /* 8 + n */ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ - __u8 bDescriptorSubtype; /* USB_MS_HEADER */ + __u8 bDescriptorSubtype; /* UAC_MS_HEADER */ __le16 bcdADC; /* 0x0100 */ __le16 wTotalLength; /* includes Unit and Terminal desc. */ __u8 bInCollection; /* n */ __u8 baInterfaceNr[]; /* [n] */ } __attribute__ ((packed)); -#define USB_DT_AC_HEADER_SIZE(n) (8 + (n)) +#define UAC_DT_AC_HEADER_SIZE(n) (8 + (n)) /* As above, but more useful for defining your own descriptors: */ -#define DECLARE_USB_AC_HEADER_DESCRIPTOR(n) \ -struct usb_ac_header_descriptor_##n { \ +#define DECLARE_UAC_AC_HEADER_DESCRIPTOR(n) \ +struct uac_ac_header_descriptor_##n { \ __u8 bLength; \ __u8 bDescriptorType; \ __u8 bDescriptorSubtype; \ @@ -109,7 +106,7 @@ struct usb_ac_header_descriptor_##n { \ } __attribute__ ((packed)) /* 4.3.2.1 Input Terminal Descriptor */ -struct usb_input_terminal_descriptor { +struct uac_input_terminal_descriptor { __u8 bLength; /* in bytes: 12 */ __u8 bDescriptorType; /* CS_INTERFACE descriptor type */ __u8 bDescriptorSubtype; /* INPUT_TERMINAL descriptor subtype */ @@ -122,18 +119,19 @@ struct usb_input_terminal_descriptor { __u8 iTerminal; } __attribute__ ((packed)); -#define USB_DT_AC_INPUT_TERMINAL_SIZE 12 +#define UAC_DT_INPUT_TERMINAL_SIZE 12 -#define USB_AC_INPUT_TERMINAL_UNDEFINED 0x200 -#define USB_AC_INPUT_TERMINAL_MICROPHONE 0x201 -#define USB_AC_INPUT_TERMINAL_DESKTOP_MICROPHONE 0x202 -#define USB_AC_INPUT_TERMINAL_PERSONAL_MICROPHONE 0x203 -#define USB_AC_INPUT_TERMINAL_OMNI_DIR_MICROPHONE 0x204 -#define USB_AC_INPUT_TERMINAL_MICROPHONE_ARRAY 0x205 -#define USB_AC_INPUT_TERMINAL_PROC_MICROPHONE_ARRAY 0x206 +/* Terminals - 2.2 Input Terminal Types */ +#define UAC_INPUT_TERMINAL_UNDEFINED 0x200 +#define UAC_INPUT_TERMINAL_MICROPHONE 0x201 +#define UAC_INPUT_TERMINAL_DESKTOP_MICROPHONE 0x202 +#define UAC_INPUT_TERMINAL_PERSONAL_MICROPHONE 0x203 +#define UAC_INPUT_TERMINAL_OMNI_DIR_MICROPHONE 0x204 +#define UAC_INPUT_TERMINAL_MICROPHONE_ARRAY 0x205 +#define UAC_INPUT_TERMINAL_PROC_MICROPHONE_ARRAY 0x206 /* 4.3.2.2 Output Terminal Descriptor */ -struct usb_output_terminal_descriptor { +struct uac_output_terminal_descriptor { __u8 bLength; /* in bytes: 9 */ __u8 bDescriptorType; /* CS_INTERFACE descriptor type */ __u8 bDescriptorSubtype; /* OUTPUT_TERMINAL descriptor subtype */ @@ -144,23 +142,24 @@ struct usb_output_terminal_descriptor { __u8 iTerminal; } __attribute__ ((packed)); -#define USB_DT_AC_OUTPUT_TERMINAL_SIZE 9 +#define UAC_DT_OUTPUT_TERMINAL_SIZE 9 -#define USB_AC_OUTPUT_TERMINAL_UNDEFINED 0x300 -#define USB_AC_OUTPUT_TERMINAL_SPEAKER 0x301 -#define USB_AC_OUTPUT_TERMINAL_HEADPHONES 0x302 -#define USB_AC_OUTPUT_TERMINAL_HEAD_MOUNTED_DISPLAY_AUDIO 0x303 -#define USB_AC_OUTPUT_TERMINAL_DESKTOP_SPEAKER 0x304 -#define USB_AC_OUTPUT_TERMINAL_ROOM_SPEAKER 0x305 -#define USB_AC_OUTPUT_TERMINAL_COMMUNICATION_SPEAKER 0x306 -#define USB_AC_OUTPUT_TERMINAL_LOW_FREQ_EFFECTS_SPEAKER 0x307 +/* Terminals - 2.3 Output Terminal Types */ +#define UAC_OUTPUT_TERMINAL_UNDEFINED 0x300 +#define UAC_OUTPUT_TERMINAL_SPEAKER 0x301 +#define UAC_OUTPUT_TERMINAL_HEADPHONES 0x302 +#define UAC_OUTPUT_TERMINAL_HEAD_MOUNTED_DISPLAY_AUDIO 0x303 +#define UAC_OUTPUT_TERMINAL_DESKTOP_SPEAKER 0x304 +#define UAC_OUTPUT_TERMINAL_ROOM_SPEAKER 0x305 +#define UAC_OUTPUT_TERMINAL_COMMUNICATION_SPEAKER 0x306 +#define UAC_OUTPUT_TERMINAL_LOW_FREQ_EFFECTS_SPEAKER 0x307 /* Set bControlSize = 2 as default setting */ -#define USB_DT_AC_FEATURE_UNIT_SIZE(ch) (7 + ((ch) + 1) * 2) +#define UAC_DT_FEATURE_UNIT_SIZE(ch) (7 + ((ch) + 1) * 2) /* As above, but more useful for defining your own descriptors: */ -#define DECLARE_USB_AC_FEATURE_UNIT_DESCRIPTOR(ch) \ -struct usb_ac_feature_unit_descriptor_##ch { \ +#define DECLARE_UAC_FEATURE_UNIT_DESCRIPTOR(ch) \ +struct uac_feature_unit_descriptor_##ch { \ __u8 bLength; \ __u8 bDescriptorType; \ __u8 bDescriptorSubtype; \ @@ -172,7 +171,7 @@ struct usb_ac_feature_unit_descriptor_##ch { \ } __attribute__ ((packed)) /* 4.5.2 Class-Specific AS Interface Descriptor */ -struct usb_as_header_descriptor { +struct uac_as_header_descriptor { __u8 bLength; /* in bytes: 7 */ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ __u8 bDescriptorSubtype; /* AS_GENERAL */ @@ -181,16 +180,17 @@ struct usb_as_header_descriptor { __le16 wFormatTag; /* The Audio Data Format */ } __attribute__ ((packed)); -#define USB_DT_AS_HEADER_SIZE 7 +#define UAC_DT_AS_HEADER_SIZE 7 -#define USB_AS_AUDIO_FORMAT_TYPE_I_UNDEFINED 0x0 -#define USB_AS_AUDIO_FORMAT_TYPE_I_PCM 0x1 -#define USB_AS_AUDIO_FORMAT_TYPE_I_PCM8 0x2 -#define USB_AS_AUDIO_FORMAT_TYPE_I_IEEE_FLOAT 0x3 -#define USB_AS_AUDIO_FORMAT_TYPE_I_ALAW 0x4 -#define USB_AS_AUDIO_FORMAT_TYPE_I_MULAW 0x5 +/* Formats - A.1.1 Audio Data Format Type I Codes */ +#define UAC_FORMAT_TYPE_I_UNDEFINED 0x0 +#define UAC_FORMAT_TYPE_I_PCM 0x1 +#define UAC_FORMAT_TYPE_I_PCM8 0x2 +#define UAC_FORMAT_TYPE_I_IEEE_FLOAT 0x3 +#define UAC_FORMAT_TYPE_I_ALAW 0x4 +#define UAC_FORMAT_TYPE_I_MULAW 0x5 -struct usb_as_format_type_i_continuous_descriptor { +struct uac_format_type_i_continuous_descriptor { __u8 bLength; /* in bytes: 8 + (ns * 3) */ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ __u8 bDescriptorSubtype; /* FORMAT_TYPE */ @@ -203,9 +203,9 @@ struct usb_as_format_type_i_continuous_descriptor { __u8 tUpperSamFreq[3]; } __attribute__ ((packed)); -#define USB_AS_FORMAT_TYPE_I_CONTINUOUS_DESC_SIZE 14 +#define UAC_FORMAT_TYPE_I_CONTINUOUS_DESC_SIZE 14 -struct usb_as_formate_type_i_discrete_descriptor { +struct uac_format_type_i_discrete_descriptor { __u8 bLength; /* in bytes: 8 + (ns * 3) */ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ __u8 bDescriptorSubtype; /* FORMAT_TYPE */ @@ -217,8 +217,8 @@ struct usb_as_formate_type_i_discrete_descriptor { __u8 tSamFreq[][3]; } __attribute__ ((packed)); -#define DECLARE_USB_AS_FORMAT_TYPE_I_DISCRETE_DESC(n) \ -struct usb_as_formate_type_i_discrete_descriptor_##n { \ +#define DECLARE_UAC_FORMAT_TYPE_I_DISCRETE_DESC(n) \ +struct uac_format_type_i_discrete_descriptor_##n { \ __u8 bLength; \ __u8 bDescriptorType; \ __u8 bDescriptorSubtype; \ @@ -230,14 +230,15 @@ struct usb_as_formate_type_i_discrete_descriptor_##n { \ __u8 tSamFreq[n][3]; \ } __attribute__ ((packed)) -#define USB_AS_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(n) (8 + (n * 3)) +#define UAC_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(n) (8 + (n * 3)) -#define USB_AS_FORMAT_TYPE_UNDEFINED 0x0 -#define USB_AS_FORMAT_TYPE_I 0x1 -#define USB_AS_FORMAT_TYPE_II 0x2 -#define USB_AS_FORMAT_TYPE_III 0x3 +/* Formats - A.2 Format Type Codes */ +#define UAC_FORMAT_TYPE_UNDEFINED 0x0 +#define UAC_FORMAT_TYPE_I 0x1 +#define UAC_FORMAT_TYPE_II 0x2 +#define UAC_FORMAT_TYPE_III 0x3 -struct usb_as_iso_endpoint_descriptor { +struct uac_iso_endpoint_descriptor { __u8 bLength; /* in bytes: 7 */ __u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */ __u8 bDescriptorSubtype; /* EP_GENERAL */ @@ -245,30 +246,35 @@ struct usb_as_iso_endpoint_descriptor { __u8 bLockDelayUnits; __le16 wLockDelay; }; -#define USB_AS_ISO_ENDPOINT_DESC_SIZE 7 - -#define FU_CONTROL_UNDEFINED 0x00 -#define MUTE_CONTROL 0x01 -#define VOLUME_CONTROL 0x02 -#define BASS_CONTROL 0x03 -#define MID_CONTROL 0x04 -#define TREBLE_CONTROL 0x05 -#define GRAPHIC_EQUALIZER_CONTROL 0x06 -#define AUTOMATIC_GAIN_CONTROL 0x07 -#define DELAY_CONTROL 0x08 -#define BASS_BOOST_CONTROL 0x09 -#define LOUDNESS_CONTROL 0x0a - -#define FU_MUTE (1 << (MUTE_CONTROL - 1)) -#define FU_VOLUME (1 << (VOLUME_CONTROL - 1)) -#define FU_BASS (1 << (BASS_CONTROL - 1)) -#define FU_MID (1 << (MID_CONTROL - 1)) -#define FU_TREBLE (1 << (TREBLE_CONTROL - 1)) -#define FU_GRAPHIC_EQ (1 << (GRAPHIC_EQUALIZER_CONTROL - 1)) -#define FU_AUTO_GAIN (1 << (AUTOMATIC_GAIN_CONTROL - 1)) -#define FU_DELAY (1 << (DELAY_CONTROL - 1)) -#define FU_BASS_BOOST (1 << (BASS_BOOST_CONTROL - 1)) -#define FU_LOUDNESS (1 << (LOUDNESS_CONTROL - 1)) +#define UAC_ISO_ENDPOINT_DESC_SIZE 7 + +#define UAC_EP_CS_ATTR_SAMPLE_RATE 0x01 +#define UAC_EP_CS_ATTR_PITCH_CONTROL 0x02 +#define UAC_EP_CS_ATTR_FILL_MAX 0x80 + +/* A.10.2 Feature Unit Control Selectors */ +#define UAC_FU_CONTROL_UNDEFINED 0x00 +#define UAC_MUTE_CONTROL 0x01 +#define UAC_VOLUME_CONTROL 0x02 +#define UAC_BASS_CONTROL 0x03 +#define UAC_MID_CONTROL 0x04 +#define UAC_TREBLE_CONTROL 0x05 +#define UAC_GRAPHIC_EQUALIZER_CONTROL 0x06 +#define UAC_AUTOMATIC_GAIN_CONTROL 0x07 +#define UAC_DELAY_CONTROL 0x08 +#define UAC_BASS_BOOST_CONTROL 0x09 +#define UAC_LOUDNESS_CONTROL 0x0a + +#define UAC_FU_MUTE (1 << (UAC_MUTE_CONTROL - 1)) +#define UAC_FU_VOLUME (1 << (UAC_VOLUME_CONTROL - 1)) +#define UAC_FU_BASS (1 << (UAC_BASS_CONTROL - 1)) +#define UAC_FU_MID (1 << (UAC_MID_CONTROL - 1)) +#define UAC_FU_TREBLE (1 << (UAC_TREBLE_CONTROL - 1)) +#define UAC_FU_GRAPHIC_EQ (1 << (UAC_GRAPHIC_EQUALIZER_CONTROL - 1)) +#define UAC_FU_AUTO_GAIN (1 << (UAC_AUTOMATIC_GAIN_CONTROL - 1)) +#define UAC_FU_DELAY (1 << (UAC_DELAY_CONTROL - 1)) +#define UAC_FU_BASS_BOOST (1 << (UAC_BASS_BOOST_CONTROL - 1)) +#define UAC_FU_LOUDNESS (1 << (UAC_LOUDNESS_CONTROL - 1)) struct usb_audio_control { struct list_head list; -- cgit v1.2.3 From b95cd7ec3e93bae199e820bd65b21b23e4538acc Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sun, 21 Jun 2009 23:21:55 +0200 Subject: USB audio gadget: Un-inline generic_[gs]et_cmd Those functions are used only used to fill the set/get members of usb_audio_control. It doesn't make much sense to inline them. Signed-off-by: Laurent Pinchart Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/audio.h | 12 ------------ 1 file changed, 12 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h index c3edfcb72c34..7b33c493917f 100644 --- a/include/linux/usb/audio.h +++ b/include/linux/usb/audio.h @@ -285,18 +285,6 @@ struct usb_audio_control { int (*get)(struct usb_audio_control *con, u8 cmd); }; -static inline int generic_set_cmd(struct usb_audio_control *con, u8 cmd, int value) -{ - con->data[cmd] = value; - - return 0; -} - -static inline int generic_get_cmd(struct usb_audio_control *con, u8 cmd) -{ - return con->data[cmd]; -} - struct usb_audio_control_selector { struct list_head list; struct list_head control; -- cgit v1.2.3 From 7cbe5dca399a50ce8aa74314b1d276e2fb904e1b Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 29 Jun 2009 10:56:54 -0400 Subject: USB: add API for userspace drivers to "claim" ports This patch (as1258) implements a feature that users have been asking for: It gives programs the ability to "claim" a port on a hub, via a new usbfs ioctl. A device plugged into a "claimed" port will not be touched by the kernel beyond the immediate necessities of initialization and enumeration. In particular, when a device is plugged into a "claimed" port, the kernel will not select and install a configuration. And when a config is installed by usbfs or sysfs, the kernel will not probe any drivers for any of the interfaces. (However the kernel will fetch various string descriptors during enumeration. One could argue that this isn't really necessary, but the strings are exported in sysfs.) The patch does not guarantee exclusive access to these devices; it is still possible for more than one program to open the device file concurrently. Programs are responsible for coordinating access among themselves. A demonstration program showing how to use the new interface can be found in an attachment to http://marc.info/?l=linux-usb&m=124345857431452&w=2 The patch also makes a small simplification to the hub driver, replacing a bunch of more-or-less useless variants of "out of memory" with a single message. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- include/linux/usbdevice_fs.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usbdevice_fs.h b/include/linux/usbdevice_fs.h index 0044d9b4cb85..00ceebeb9e5c 100644 --- a/include/linux/usbdevice_fs.h +++ b/include/linux/usbdevice_fs.h @@ -175,4 +175,6 @@ struct usbdevfs_ioctl32 { #define USBDEVFS_CLEAR_HALT _IOR('U', 21, unsigned int) #define USBDEVFS_DISCONNECT _IO('U', 22) #define USBDEVFS_CONNECT _IO('U', 23) +#define USBDEVFS_CLAIM_PORT _IOR('U', 24, unsigned int) +#define USBDEVFS_RELEASE_PORT _IOR('U', 25, unsigned int) #endif /* _LINUX_USBDEVICE_FS_H */ -- cgit v1.2.3 From ccf5b801cef4f9e2d708d3b87e91e2bc6abd5206 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 29 Jun 2009 11:00:01 -0400 Subject: USB: make intf.pm_usage an atomic_t This patch (as1260) changes the pm_usage_cnt field in struct usb_interface from an int to an atomic_t. This is so that drivers can invoke the usb_autopm_get_interface_async() and usb_autopm_put_interface_async() routines without locking and without fear of corrupting the pm_usage_cnt value. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- include/linux/usb.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb.h b/include/linux/usb.h index 3b45a0d27b80..a34fa89f1474 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -195,7 +195,7 @@ struct usb_interface { struct device dev; /* interface specific device info */ struct device *usb_dev; - int pm_usage_cnt; /* usage counter for autosuspend */ + atomic_t pm_usage_cnt; /* usage counter for autosuspend */ struct work_struct reset_ws; /* for resets in atomic context */ }; #define to_usb_interface(d) container_of(d, struct usb_interface, dev) @@ -551,13 +551,13 @@ extern void usb_autopm_put_interface_async(struct usb_interface *intf); static inline void usb_autopm_enable(struct usb_interface *intf) { - intf->pm_usage_cnt = 0; + atomic_set(&intf->pm_usage_cnt, 0); usb_autopm_set_interface(intf); } static inline void usb_autopm_disable(struct usb_interface *intf) { - intf->pm_usage_cnt = 1; + atomic_set(&intf->pm_usage_cnt, 1); usb_autopm_set_interface(intf); } -- cgit v1.2.3 From 331ac6b288d9f3689514ced1878041fb0df7e13c Mon Sep 17 00:00:00 2001 From: Alek Du Date: Mon, 13 Jul 2009 12:41:20 +0800 Subject: USB: EHCI: Add Intel Moorestown EHCI controller HOSTPCx extensions and support phy low power mode The Intel Moorestown EHCI controller supports non-standard HOSTPCx register extension. This register controls the LPM behaviour and controls the behaviour of each USB port. Signed-off-by: Jacob Pan Signed-off-by: Alek Du Acked-by: Alan Stern Cc: David Brownell Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/ehci_def.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h index 5b88e36c9103..4c4b701ff265 100644 --- a/include/linux/usb/ehci_def.h +++ b/include/linux/usb/ehci_def.h @@ -132,6 +132,19 @@ struct ehci_regs { #define USBMODE_CM_HC (3<<0) /* host controller mode */ #define USBMODE_CM_IDLE (0<<0) /* idle state */ +/* Moorestown has some non-standard registers, partially due to the fact that + * its EHCI controller has both TT and LPM support. HOSTPCx are extentions to + * PORTSCx + */ +#define HOSTPC0 0x84 /* HOSTPC extension */ +#define HOSTPC_PHCD (1<<22) /* Phy clock disable */ +#define HOSTPC_PSPD (3<<25) /* Port speed detection */ +#define USBMODE_EX 0xc8 /* USB Device mode extension */ +#define USBMODE_EX_VBPS (1<<5) /* VBus Power Select On */ +#define USBMODE_EX_HC (3<<0) /* host controller mode */ +#define TXFILLTUNING 0x24 /* TX FIFO Tuning register */ +#define TXFIFO_DEFAULT (8<<16) /* FIFO burst threshold 8 */ + /* Appendix C, Debug port ... intended for use with special "debug devices" * that can help if there's no serial console. (nonstandard enumeration.) */ -- cgit v1.2.3 From 9da69c604d87afea37b5411867bb76e3c624cc92 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Wed, 15 Jul 2009 23:22:54 -0400 Subject: USB: isp1760: allow platform devices to customize devflags Platform device support was merged earlier, but support for boards to customize the devflags aspect of the controller was not. We want this on Blackfin systems to control the bus width, but might as well expose all of the fields while we're at it. Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu Signed-off-by: Mike Frysinger Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/isp1760.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 include/linux/usb/isp1760.h (limited to 'include/linux') diff --git a/include/linux/usb/isp1760.h b/include/linux/usb/isp1760.h new file mode 100644 index 000000000000..de7de53c5531 --- /dev/null +++ b/include/linux/usb/isp1760.h @@ -0,0 +1,18 @@ +/* + * board initialization should put one of these into dev->platform_data + * and place the isp1760 onto platform_bus named "isp1760-hcd". + */ + +#ifndef __LINUX_USB_ISP1760_H +#define __LINUX_USB_ISP1760_H + +struct isp1760_platform_data { + unsigned is_isp1761:1; /* Chip is ISP1761 */ + unsigned bus_width_16:1; /* 16/32-bit data bus width */ + unsigned port1_otg:1; /* Port 1 supports OTG */ + unsigned analog_oc:1; /* Analog overcurrent */ + unsigned dack_polarity_high:1; /* DACK active high */ + unsigned dreq_polarity_high:1; /* DREQ active high */ +}; + +#endif /* __LINUX_USB_ISP1760_H */ -- cgit v1.2.3 From a9d43091c5be1e7a60d5abe84be4f3050236b26a Mon Sep 17 00:00:00 2001 From: Lothar Wassmann Date: Thu, 16 Jul 2009 20:51:21 -0400 Subject: USB: NXP ISP1362 USB host driver Signed-off-by: Lothar Wassmann Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu Signed-off-by: Mike Frysinger Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/isp1362.h | 46 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 include/linux/usb/isp1362.h (limited to 'include/linux') diff --git a/include/linux/usb/isp1362.h b/include/linux/usb/isp1362.h new file mode 100644 index 000000000000..642684bb9292 --- /dev/null +++ b/include/linux/usb/isp1362.h @@ -0,0 +1,46 @@ +/* + * board initialization code should put one of these into dev->platform_data + * and place the isp1362 onto platform_bus. + */ + +#ifndef __LINUX_USB_ISP1362_H__ +#define __LINUX_USB_ISP1362_H__ + +struct isp1362_platform_data { + /* Enable internal pulldown resistors on downstream ports */ + unsigned sel15Kres:1; + /* Clock cannot be stopped */ + unsigned clknotstop:1; + /* On-chip overcurrent protection */ + unsigned oc_enable:1; + /* INT output polarity */ + unsigned int_act_high:1; + /* INT edge or level triggered */ + unsigned int_edge_triggered:1; + /* DREQ output polarity */ + unsigned dreq_act_high:1; + /* DACK input polarity */ + unsigned dack_act_high:1; + /* chip can be resumed via H_WAKEUP pin */ + unsigned remote_wakeup_connected:1; + /* Switch or not to switch (keep always powered) */ + unsigned no_power_switching:1; + /* Ganged port power switching (0) or individual port power switching (1) */ + unsigned power_switching_mode:1; + /* Given port_power, msec/2 after power on till power good */ + u8 potpg; + /* Hardware reset set/clear */ + void (*reset) (struct device *dev, int set); + /* Clock start/stop */ + void (*clock) (struct device *dev, int start); + /* Inter-io delay (ns). The chip is picky about access timings; it + * expects at least: + * 110ns delay between consecutive accesses to DATA_REG, + * 300ns delay between access to ADDR_REG and DATA_REG (registers) + * 462ns delay between access to ADDR_REG and DATA_REG (buffer memory) + * WE MUST NOT be activated during these intervals (even without CS!) + */ + void (*delay) (struct device *dev, unsigned int delay); +}; + +#endif -- cgit v1.2.3 From c35013087aa9b10e4674b53b7c8f7966de83c194 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Wed, 29 Jul 2009 14:23:25 +0300 Subject: USB: audio: guard kernel-only code with __KERNEL__ include/linux/usb/audio.h is exported to userspace, so part of this file that is for internal kernel usage need to be guarded with ifdef __KERNEL__. This way make headers_install will stript it out. Signed-off-by: Michael S. Tsirkin Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/audio.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h index 7b33c493917f..eaf9dffe0a01 100644 --- a/include/linux/usb/audio.h +++ b/include/linux/usb/audio.h @@ -276,6 +276,8 @@ struct uac_iso_endpoint_descriptor { #define UAC_FU_BASS_BOOST (1 << (UAC_BASS_BOOST_CONTROL - 1)) #define UAC_FU_LOUDNESS (1 << (UAC_LOUDNESS_CONTROL - 1)) +#ifdef __KERNEL__ + struct usb_audio_control { struct list_head list; const char *name; @@ -294,4 +296,6 @@ struct usb_audio_control_selector { struct usb_descriptor_header *desc; }; +#endif /* __KERNEL__ */ + #endif /* __LINUX_USB_AUDIO_H */ -- cgit v1.2.3 From 8e8dce065088833fc418bfa5fbf035cb0726c04c Mon Sep 17 00:00:00 2001 From: David VomLehn Date: Fri, 28 Aug 2009 12:54:27 -0700 Subject: USB: use kfifo to buffer usb-generic serial writes When do_output_char() attempts to write a carriage return/line feed sequence, it first checks to see how much buffer room is available. If there are at least two characters free, it will write the carriage return/line feed with two calls to tty_put_char(). It calls the tty_operation functions write() for devices that don't support the tty_operations function put_char(). If the USB generic serial device's write URB is not in use, it will return the buffer size when asked how much room is available. The write() of the carriage return will cause it to mark the write URB busy, so the subsequent write() of the line feed will be ignored. This patch uses the kfifo infrastructure to implement a write FIFO that accurately returns the amount of space available in the buffer. Signed-off-by: David VomLehn Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/serial.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 7b85e327af91..c17eb64d7213 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -59,6 +59,7 @@ enum port_dev_state { * @bulk_out_buffer: pointer to the bulk out buffer for this port. * @bulk_out_size: the size of the bulk_out_buffer, in bytes. * @write_urb: pointer to the bulk out struct urb for this port. + * @write_fifo: kfifo used to buffer outgoing data * @write_urb_busy: port`s writing status * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this * port. @@ -96,6 +97,7 @@ struct usb_serial_port { unsigned char *bulk_out_buffer; int bulk_out_size; struct urb *write_urb; + struct kfifo *write_fifo; int write_urb_busy; __u8 bulk_out_endpointAddress; -- cgit v1.2.3 From df6c516900d48df3581b23d37d6516a22ec4f2ca Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Thu, 20 Aug 2009 15:39:48 -0500 Subject: USB: ehci,dbgp,early_printk: split ehci debug driver from early_printk.c Move the dbgp early printk driver in advance of refactoring and adding new code, so the changes to this code are tracked separately from the move of the code. The drivers/usb/early directory will be the location of the current and future early usb code for driving usb devices prior initializing the standard interrupt driven USB drivers. Signed-off-by: Jason Wessel Cc: Ingo Molnar Cc: Andrew Morton Cc: Yinghai Lu Cc: "Eric W. Biederman" Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/ehci_def.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h index 4c4b701ff265..1deac2a7b12e 100644 --- a/include/linux/usb/ehci_def.h +++ b/include/linux/usb/ehci_def.h @@ -170,4 +170,10 @@ struct ehci_dbg_port { #define DBGP_EPADDR(dev, ep) (((dev)<<8)|(ep)) } __attribute__ ((packed)); +#ifdef CONFIG_EARLY_PRINTK_DBGP +#include +extern int __init early_dbgp_init(char *s); +extern struct console early_dbgp_console; +#endif /* CONFIG_EARLY_PRINTK_DBGP */ + #endif /* __LINUX_USB_EHCI_DEF_H */ -- cgit v1.2.3 From 917778267fbe67703ab7d5c6f0b7a05d4c3df485 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Thu, 20 Aug 2009 15:39:53 -0500 Subject: USB: ehci-dbgp: stability improvements and external re-init This patch implements several changes: 1) Improve the capability to debug the dbgp driver The dbgp_ehci_status() was added in a number of places to report the critical ehci registers to diagnose the cause of a failure of the ehci-dbgp driver. 2) Capability to survive the host controller initialization The dbgp_external_startup(), dbgp_not_safe, and dbgp_phys_port were added so as to allow the ehci-dbgp to re-initialize after the ehci host controller is reset by the standard host controller driver. This same routine is common for the early startup or re-initialization. This resulted in the need to move some of the initialization code out of the __init section because the ehci driver has the possibility to be loaded later on as a kernel module. 3) Stability improvements for device initialization The device enumeration from 0 to 127 has the possibility to fail the first time after a warm reset on some older EHCI debug controllers. The enumeration will be tried up to 3 times to account for this failure case. The dbg_wait_until_complete() was changed to wait up to 250 ms before failing which only comes into play during device initialization. The maximum delay will never get hit during the course of normal operation of the driver, unless the device got unplugged or there was a ehci controller failure, in which case the dbgp device driver will shut itself down. Signed-off-by: Jason Wessel Cc: Ingo Molnar Cc: Andrew Morton Cc: dbrownell@users.sourceforge.net Cc: Yinghai Lu Cc: "Eric W. Biederman" Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/ehci_def.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h index 1deac2a7b12e..07851e05d763 100644 --- a/include/linux/usb/ehci_def.h +++ b/include/linux/usb/ehci_def.h @@ -176,4 +176,9 @@ extern int __init early_dbgp_init(char *s); extern struct console early_dbgp_console; #endif /* CONFIG_EARLY_PRINTK_DBGP */ +#ifdef CONFIG_EARLY_PRINTK_DBGP +/* Call backs from ehci host driver to ehci debug driver */ +extern int dbgp_external_startup(void); +#endif + #endif /* __LINUX_USB_EHCI_DEF_H */ -- cgit v1.2.3 From 8d053c79f22462f55c02c8083580730b922cf7b4 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Thu, 20 Aug 2009 15:39:54 -0500 Subject: USB: ehci-dbgp,ehci: Allow early or late use of the dbgp device If the EHCI debug port is initialized and in use, the EHCI host controller driver must follow two rules. 1) If the EHCI host driver issues a controller reset, the debug controller driver re-initialization must get called after the reset is completed. 2) The EHCI host driver should ignore any requests to the physical EHCI debug port when the EHCI debug port is in use. The code to check for the debug port was moved from ehci_pci_reinit() to ehci_pci_setup because it must get called prior to ehci_reset() which will clear the debug port registers. Signed-off-by: Jason Wessel Cc: Alan Stern Cc: dbrownell@users.sourceforge.net Cc: Ingo Molnar Cc: Andrew Morton Cc: Yinghai Lu Cc: "Eric W. Biederman" Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/ehci_def.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h index 07851e05d763..1909d924f816 100644 --- a/include/linux/usb/ehci_def.h +++ b/include/linux/usb/ehci_def.h @@ -179,6 +179,16 @@ extern struct console early_dbgp_console; #ifdef CONFIG_EARLY_PRINTK_DBGP /* Call backs from ehci host driver to ehci debug driver */ extern int dbgp_external_startup(void); +extern int dbgp_reset_prep(void); +#else +static inline int dbgp_reset_prep(void) +{ + return 1; +} +static inline int dbgp_external_startup(void) +{ + return -1; +} #endif #endif /* __LINUX_USB_EHCI_DEF_H */ -- cgit v1.2.3 From aab2d4086a1876fcff282aa36e2d4a92aa9935c9 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Thu, 20 Aug 2009 15:39:55 -0500 Subject: USB: ehci-dbgp: errata for EHCI debug controller initialization On some EHCI usb debug controllers, the EHCI debug device will fail to be seen after a port reset, after a warm reset. Two options exist to get the device to initialize correctly. Option 1 is to unplug and plug in the device. Option 2 is to use the EHCI port test to get the usb debug device to start talking again. At that point the debug controller port reset will succeed. Signed-off-by: Jason Wessel Cc: Ingo Molnar Cc: Andrew Morton Cc: Yinghai Lu Cc: "Eric W. Biederman" CC: dbrownell@users.sourceforge.net Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/ehci_def.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h index 1909d924f816..af4b86f3aca3 100644 --- a/include/linux/usb/ehci_def.h +++ b/include/linux/usb/ehci_def.h @@ -105,6 +105,7 @@ struct ehci_regs { #define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */ #define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */ /* 19:16 for port testing */ +#define PORT_TEST_PKT (0x4<<16) /* Port Test Control - packet test */ #define PORT_LED_OFF (0<<14) #define PORT_LED_AMBER (1<<14) #define PORT_LED_GREEN (2<<14) -- cgit v1.2.3 From 01c6460f968d7b57fc6f98adb587952628c6e099 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 1 Sep 2009 11:09:56 -0400 Subject: USB: usbfs: add USBDEVFS_URB_BULK_CONTINUATION flag This patch (as1283) adds a new flag, USBDEVFS_URB_BULK_CONTINUATION, to usbfs. It is intended for userspace libraries such as libusb and openusb. When they have to break up a single usbfs bulk transfer into multiple URBs, they will set the flag on all but the first URB of the series. If an error other than an unlink occurs, the kernel will automatically cancel all the following URBs for the same endpoint and refuse to accept new submissions, until an URB is encountered that is not marked as a BULK_CONTINUATION. Such an URB would indicate the start of a new transfer or the presence of an older library, so the kernel returns to normal operation. This enables libraries to delimit bulk transfers correctly, even in the presence of early termination as indicated by short packets. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- include/linux/usbdevice_fs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/usbdevice_fs.h b/include/linux/usbdevice_fs.h index 00ceebeb9e5c..b2a7d8ba6ee3 100644 --- a/include/linux/usbdevice_fs.h +++ b/include/linux/usbdevice_fs.h @@ -77,6 +77,7 @@ struct usbdevfs_connectinfo { #define USBDEVFS_URB_SHORT_NOT_OK 0x01 #define USBDEVFS_URB_ISO_ASAP 0x02 +#define USBDEVFS_URB_BULK_CONTINUATION 0x04 #define USBDEVFS_URB_NO_FSBR 0x20 #define USBDEVFS_URB_ZERO_PACKET 0x40 #define USBDEVFS_URB_NO_INTERRUPT 0x80 -- cgit v1.2.3 From fa081b00a80ef3f4575c99af6e97d29e1628cf51 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 22 Sep 2009 16:43:27 -0700 Subject: include/linux/kmemcheck.h: fix a trillion warnings of the form include/net/inet_sock.h:208: warning: ISO C90 forbids mixed declarations and code Cc: Johannes Berg Acked-by: Vegard Nossum Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kmemcheck.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/kmemcheck.h b/include/linux/kmemcheck.h index c8006607f947..136cdcdf92ef 100644 --- a/include/linux/kmemcheck.h +++ b/include/linux/kmemcheck.h @@ -145,10 +145,12 @@ static inline bool kmemcheck_is_obj_initialized(unsigned long addr, size_t size) #define kmemcheck_annotate_bitfield(ptr, name) \ do { \ + int _n; \ + \ if (!ptr) \ break; \ \ - int _n = (long) &((ptr)->name##_end) \ + _n = (long) &((ptr)->name##_end) \ - (long) &((ptr)->name##_begin); \ BUILD_BUG_ON(_n < 0); \ \ -- cgit v1.2.3 From af91322ef3f29ae4114e736e2a72e28b4d619cf9 Mon Sep 17 00:00:00 2001 From: Dave Young Date: Tue, 22 Sep 2009 16:43:33 -0700 Subject: printk: add printk_delay to make messages readable for some scenarios When syslog is not possible, at the same time there's no serial/net console available, it will be hard to read the printk messages. For example oops/panic/warning messages in shutdown phase. Add a printk delay feature, we can make each printk message delay some milliseconds. Setting the delay by proc/sysctl interface: /proc/sys/kernel/printk_delay The value range from 0 - 10000, default value is 0 [akpm@linux-foundation.org: fix a few things] Signed-off-by: Dave Young Acked-by: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kernel.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 2b5b1e0899a8..0a2a19087863 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -246,6 +246,8 @@ extern int printk_ratelimit(void); extern bool printk_timed_ratelimit(unsigned long *caller_jiffies, unsigned int interval_msec); +extern int printk_delay_msec; + /* * Print a one-time message (analogous to WARN_ONCE() et al): */ -- cgit v1.2.3 From 1fd7317d02ec03c6fdf072317841287933d06d24 Mon Sep 17 00:00:00 2001 From: Nick Black Date: Tue, 22 Sep 2009 16:43:33 -0700 Subject: Move magic numbers into magic.h Move various magic-number definitions into magic.h. Signed-off-by: Nick Black Acked-by: Pekka Enberg Cc: Al Viro Cc: "David S. Miller" Cc: Casey Schaufler Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/magic.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/magic.h b/include/linux/magic.h index 1923327b9869..bce37786a0a5 100644 --- a/include/linux/magic.h +++ b/include/linux/magic.h @@ -13,6 +13,7 @@ #define SECURITYFS_MAGIC 0x73636673 #define SELINUX_MAGIC 0xf97cff8c #define TMPFS_MAGIC 0x01021994 +#define HUGETLBFS_MAGIC 0x958458f6 /* some random number */ #define SQUASHFS_MAGIC 0x73717368 #define EFS_SUPER_MAGIC 0x414A53 #define EXT2_SUPER_MAGIC 0xEF53 @@ -53,4 +54,8 @@ #define INOTIFYFS_SUPER_MAGIC 0x2BAD1DEA #define STACK_END_MAGIC 0x57AC6E9D + +#define DEVPTS_SUPER_MAGIC 0x1cd1 +#define SOCKFS_MAGIC 0x534F434B + #endif /* __LINUX_MAGIC_H__ */ -- cgit v1.2.3 From 54fdade1c3332391948ec43530c02c4794a38172 Mon Sep 17 00:00:00 2001 From: Xiao Guangrong Date: Tue, 22 Sep 2009 16:43:39 -0700 Subject: generic-ipi: make struct call_function_data lockless This patch can remove spinlock from struct call_function_data, the reasons are below: 1: add a new interface for cpumask named cpumask_test_and_clear_cpu(), it can atomically test and clear specific cpu, we can use it instead of cpumask_test_cpu() and cpumask_clear_cpu() and no need data->lock to protect those in generic_smp_call_function_interrupt(). 2: in smp_call_function_many(), after csd_lock() return, the current's cfd_data is deleted from call_function list, so it not have race between other cpus, then cfs_data is only used in smp_call_function_many() that must disable preemption and not from a hardware interrupthandler or from a bottom half handler to call, only the correspond cpu can use it, so it not have race in current cpu, no need cfs_data->lock to protect it. 3: after 1 and 2, cfs_data->lock is only use to protect cfs_data->refs in generic_smp_call_function_interrupt(), so we can define cfs_data->refs to atomic_t, and no need cfs_data->lock any more. Signed-off-by: Xiao Guangrong Cc: Ingo Molnar Cc: Jens Axboe Cc: Nick Piggin Cc: Peter Zijlstra Acked-by: Rusty Russell [akpm@linux-foundation.org: use atomic_dec_return()] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/cpumask.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/linux') diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h index 796df12091b7..9b1d458aac6e 100644 --- a/include/linux/cpumask.h +++ b/include/linux/cpumask.h @@ -714,6 +714,18 @@ static inline int cpumask_test_and_set_cpu(int cpu, struct cpumask *cpumask) return test_and_set_bit(cpumask_check(cpu), cpumask_bits(cpumask)); } +/** + * cpumask_test_and_clear_cpu - atomically test and clear a cpu in a cpumask + * @cpu: cpu number (< nr_cpu_ids) + * @cpumask: the cpumask pointer + * + * test_and_clear_bit wrapper for cpumasks. + */ +static inline int cpumask_test_and_clear_cpu(int cpu, struct cpumask *cpumask) +{ + return test_and_clear_bit(cpumask_check(cpu), cpumask_bits(cpumask)); +} + /** * cpumask_setall - set all cpus (< nr_cpu_ids) in a cpumask * @dstp: the cpumask pointer -- cgit v1.2.3 From 88e9d34c727883d7d6f02cf1475b3ec98b8480c7 Mon Sep 17 00:00:00 2001 From: James Morris Date: Tue, 22 Sep 2009 16:43:43 -0700 Subject: seq_file: constify seq_operations Make all seq_operations structs const, to help mitigate against revectoring user-triggerable function pointers. This is derived from the grsecurity patch, although generated from scratch because it's simpler than extracting the changes from there. Signed-off-by: James Morris Acked-by: Serge Hallyn Acked-by: Casey Schaufler Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/nfsd/nfsd.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/nfsd/nfsd.h b/include/linux/nfsd/nfsd.h index 03bbe9039104..510ffdd5020e 100644 --- a/include/linux/nfsd/nfsd.h +++ b/include/linux/nfsd/nfsd.h @@ -60,7 +60,7 @@ extern spinlock_t nfsd_drc_lock; extern unsigned int nfsd_drc_max_mem; extern unsigned int nfsd_drc_mem_used; -extern struct seq_operations nfs_exports_op; +extern const struct seq_operations nfs_exports_op; /* * Function prototypes. -- cgit v1.2.3 From 02b51df1b07b4e9ca823c89284e704cadb323cd1 Mon Sep 17 00:00:00 2001 From: Scott James Remnant Date: Tue, 22 Sep 2009 16:43:44 -0700 Subject: proc connector: add event for process becoming session leader The act of a process becoming a session leader is a useful signal to a supervising init daemon such as Upstart. While a daemon will normally do this as part of the process of becoming a daemon, it is rare for its children to do so. When the children do, it is nearly always a sign that the child should be considered detached from the parent and not supervised along with it. The poster-child example is OpenSSH; the per-login children call setsid() so that they may control the pty connected to them. If the primary daemon dies or is restarted, we do not want to consider the per-login children and want to respawn the primary daemon without killing the children. This patch adds a new PROC_SID_EVENT and associated structure to the proc_event event_data union, it arranges for this to be emitted when the special PIDTYPE_SID pid is set. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Scott James Remnant Acked-by: Matt Helsley Cc: Oleg Nesterov Cc: Evgeniy Polyakov Acked-by: "David S. Miller" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/cn_proc.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/cn_proc.h b/include/linux/cn_proc.h index b8125b2eb665..47dac5ea8d3a 100644 --- a/include/linux/cn_proc.h +++ b/include/linux/cn_proc.h @@ -52,6 +52,7 @@ struct proc_event { PROC_EVENT_EXEC = 0x00000002, PROC_EVENT_UID = 0x00000004, PROC_EVENT_GID = 0x00000040, + PROC_EVENT_SID = 0x00000080, /* "next" should be 0x00000400 */ /* "last" is the last process event: exit */ PROC_EVENT_EXIT = 0x80000000 @@ -89,6 +90,11 @@ struct proc_event { } e; } id; + struct sid_proc_event { + __kernel_pid_t process_pid; + __kernel_pid_t process_tgid; + } sid; + struct exit_proc_event { __kernel_pid_t process_pid; __kernel_pid_t process_tgid; @@ -102,6 +108,7 @@ struct proc_event { void proc_fork_connector(struct task_struct *task); void proc_exec_connector(struct task_struct *task); void proc_id_connector(struct task_struct *task, int which_id); +void proc_sid_connector(struct task_struct *task); void proc_exit_connector(struct task_struct *task); #else static inline void proc_fork_connector(struct task_struct *task) @@ -114,6 +121,9 @@ static inline void proc_id_connector(struct task_struct *task, int which_id) {} +static inline void proc_sid_connector(struct task_struct *task) +{} + static inline void proc_exit_connector(struct task_struct *task) {} #endif /* CONFIG_PROC_EVENTS */ -- cgit v1.2.3 From 70867453092297be9afb2249e712a1f960ec0a09 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 22 Sep 2009 16:43:46 -0700 Subject: printk_once(): use bool for boolean flag Using the type bool (instead of int) for the __print_once flag in the printk_once() macro matches the intent of the code better, and allows the compiler to generate smaller code; eg a typical callsite with gcc 4.3.3 on i386: add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-6 (-6) function old new delta static.__print_once 4 1 -3 get_cpu_vendor 146 143 -3 Saving 6 bytes of object size per callsite by slightly improving the readability of the source seems like a win to me. Signed-off-by: Roland Dreier Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kernel.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 0a2a19087863..55723afa097b 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -252,10 +252,10 @@ extern int printk_delay_msec; * Print a one-time message (analogous to WARN_ONCE() et al): */ #define printk_once(x...) ({ \ - static int __print_once = 1; \ + static bool __print_once = true; \ \ if (__print_once) { \ - __print_once = 0; \ + __print_once = false; \ printk(x); \ } \ }) -- cgit v1.2.3 From 8c87df457cb58fe75b9b893007917cf8095660a0 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 22 Sep 2009 16:43:52 -0700 Subject: BUILD_BUG_ON(): fix it and a couple of bogus uses of it gcc permitting variable length arrays makes the current construct used for BUILD_BUG_ON() useless, as that doesn't produce any diagnostic if the controlling expression isn't really constant. Instead, this patch makes it so that a bit field gets used here. Consequently, those uses where the condition isn't really constant now also need fixing. Note that in the gfp.h, kmemcheck.h, and virtio_config.h cases MAYBE_BUILD_BUG_ON() really just serves documentation purposes - even if the expression is compile time constant (__builtin_constant_p() yields true), the array is still deemed of variable length by gcc, and hence the whole expression doesn't have the intended effect. [akpm@linux-foundation.org: make arch/sparc/include/asm/vio.h compile] [akpm@linux-foundation.org: more nonsensical assertions in tpm.c..] Signed-off-by: Jan Beulich Cc: Andi Kleen Cc: Rusty Russell Cc: Catalin Marinas Cc: "David S. Miller" Cc: Rajiv Andrade Cc: Mimi Zohar Cc: James Morris Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/gfp.h | 2 +- include/linux/kernel.h | 8 ++++++-- include/linux/kmemcheck.h | 2 +- include/linux/virtio_config.h | 3 +-- 4 files changed, 9 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/gfp.h b/include/linux/gfp.h index f53e9b868c26..557bdad320b6 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -220,7 +220,7 @@ static inline enum zone_type gfp_zone(gfp_t flags) ((1 << ZONES_SHIFT) - 1); if (__builtin_constant_p(bit)) - BUILD_BUG_ON((GFP_ZONE_BAD >> bit) & 1); + MAYBE_BUILD_BUG_ON((GFP_ZONE_BAD >> bit) & 1); else { #ifdef CONFIG_DEBUG_VM BUG_ON((GFP_ZONE_BAD >> bit) & 1); diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 55723afa097b..63dcaece1ac5 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -678,13 +678,17 @@ struct sysinfo { }; /* Force a compilation error if condition is true */ -#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)])) +#define BUILD_BUG_ON(condition) ((void)BUILD_BUG_ON_ZERO(condition)) + +/* Force a compilation error if condition is constant and true */ +#define MAYBE_BUILD_BUG_ON(cond) ((void)sizeof(char[1 - 2 * !!(cond)])) /* Force a compilation error if condition is true, but also produce a result (of value 0 and type size_t), so the expression can be used e.g. in a structure initializer (or where-ever else comma expressions aren't permitted). */ -#define BUILD_BUG_ON_ZERO(e) (sizeof(char[1 - 2 * !!(e)]) - 1) +#define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:-!!(e); })) +#define BUILD_BUG_ON_NULL(e) ((void *)sizeof(struct { int:-!!(e); })) /* Trap pasters of __FUNCTION__ at compile-time */ #define __FUNCTION__ (__func__) diff --git a/include/linux/kmemcheck.h b/include/linux/kmemcheck.h index 136cdcdf92ef..e880d4cf9e22 100644 --- a/include/linux/kmemcheck.h +++ b/include/linux/kmemcheck.h @@ -152,7 +152,7 @@ static inline bool kmemcheck_is_obj_initialized(unsigned long addr, size_t size) \ _n = (long) &((ptr)->name##_end) \ - (long) &((ptr)->name##_begin); \ - BUILD_BUG_ON(_n < 0); \ + MAYBE_BUILD_BUG_ON(_n < 0); \ \ kmemcheck_mark_initialized(&((ptr)->name##_begin), _n); \ } while (0) diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h index e547e3c8ee9a..0093dd7c1d6f 100644 --- a/include/linux/virtio_config.h +++ b/include/linux/virtio_config.h @@ -109,8 +109,7 @@ static inline bool virtio_has_feature(const struct virtio_device *vdev, unsigned int fbit) { /* Did you forget to fix assumptions on max features? */ - if (__builtin_constant_p(fbit)) - BUILD_BUG_ON(fbit >= 32); + MAYBE_BUILD_BUG_ON(fbit >= 32); if (fbit < VIRTIO_TRANSPORT_F_START) virtio_check_driver_offered_feature(vdev, fbit); -- cgit v1.2.3 From 562787a5c32ccdf182de27793a83a9f2ee86cd77 Mon Sep 17 00:00:00 2001 From: Davide Libenzi Date: Tue, 22 Sep 2009 16:43:57 -0700 Subject: anonfd: split interface into file creation and install Split the anonfd interface into a bare file pointer creation one, and a file pointer creation plus install one. There are cases, like the usage of eventfds inside other kernel interfaces, where the file pointer created by anonfd needs to be used inside the initialization of other structures. As it is right now, as soon as anon_inode_getfd() returns, the kenrle can race with userspace closing the newly installed file descriptor. This patch, while keeping the old anon_inode_getfd(), introduces a new anon_inode_getfile() (whose services are reused in anon_inode_getfd()) that allows to split the file creation phase and the fd install one. Once all the kernel structures are initialized, the code can call the proper fd_install(). Gregory manifested the need for something like this inside KVM. Signed-off-by: Davide Libenzi Cc: Alexander Viro Cc: James Morris Cc: Peter Zijlstra Cc: Gregory Haskins Acked-by: Serge Hallyn Acked-by: Roland Dreier Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/anon_inodes.h | 3 +++ include/linux/eventfd.h | 6 ++++++ 2 files changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/anon_inodes.h b/include/linux/anon_inodes.h index e0a0cdc2da43..69a21e0ebd33 100644 --- a/include/linux/anon_inodes.h +++ b/include/linux/anon_inodes.h @@ -8,6 +8,9 @@ #ifndef _LINUX_ANON_INODES_H #define _LINUX_ANON_INODES_H +struct file *anon_inode_getfile(const char *name, + const struct file_operations *fops, + void *priv, int flags); int anon_inode_getfd(const char *name, const struct file_operations *fops, void *priv, int flags); diff --git a/include/linux/eventfd.h b/include/linux/eventfd.h index 3b85ba6479f4..94dd10366a78 100644 --- a/include/linux/eventfd.h +++ b/include/linux/eventfd.h @@ -27,6 +27,7 @@ #ifdef CONFIG_EVENTFD +struct file *eventfd_file_create(unsigned int count, int flags); struct eventfd_ctx *eventfd_ctx_get(struct eventfd_ctx *ctx); void eventfd_ctx_put(struct eventfd_ctx *ctx); struct file *eventfd_fget(int fd); @@ -40,6 +41,11 @@ int eventfd_signal(struct eventfd_ctx *ctx, int n); * Ugly ugly ugly error layer to support modules that uses eventfd but * pretend to work in !CONFIG_EVENTFD configurations. Namely, AIO. */ +static inline struct file *eventfd_file_create(unsigned int count, int flags) +{ + return ERR_PTR(-ENOSYS); +} + static inline struct eventfd_ctx *eventfd_ctx_fdget(int fd) { return ERR_PTR(-ENOSYS); -- cgit v1.2.3 From a49c59c042c63b432307c1bbf7dac5a104c786e6 Mon Sep 17 00:00:00 2001 From: Rolf Eike Beer Date: Tue, 22 Sep 2009 16:44:03 -0700 Subject: Make sure the value in abs() does not get truncated if it is greater than 2^32 abs() will truncate the input if is it outside the 2^32 range. Fix that by assuming `long' input. This might generate worse code in the common case. Signed-off-by: Rolf Eike Beer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kernel.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 63dcaece1ac5..d3cd23f30039 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -146,7 +146,7 @@ extern int _cond_resched(void); #define might_sleep_if(cond) do { if (cond) might_sleep(); } while (0) #define abs(x) ({ \ - int __x = (x); \ + long __x = (x); \ (__x < 0) ? -__x : __x; \ }) -- cgit v1.2.3 From 1f10206cf8e945220f7220a809d8bfc15c21f9a5 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 22 Sep 2009 16:44:10 -0700 Subject: getrusage: fill ru_maxrss value Make ->ru_maxrss value in struct rusage filled accordingly to rss hiwater mark. This struct is filled as a parameter to getrusage syscall. ->ru_maxrss value is set to KBs which is the way it is done in BSD systems. /usr/bin/time (gnu time) application converts ->ru_maxrss to KBs which seems to be incorrect behavior. Maintainer of this util was notified by me with the patch which corrects it and cc'ed. To make this happen we extend struct signal_struct by two fields. The first one is ->maxrss which we use to store rss hiwater of the task. The second one is ->cmaxrss which we use to store highest rss hiwater of all task childs. These values are used in k_getrusage() to actually fill ->ru_maxrss. k_getrusage() uses current rss hiwater value directly if mm struct exists. Note: exec() clear mm->hiwater_rss, but doesn't clear sig->maxrss. it is intetionally behavior. *BSD getrusage have exec() inheriting. test programs ======================================================== getrusage.c =========== #include #include #include #include #include #include #include #include #include #include #include #include "common.h" #define err(str) perror(str), exit(1) int main(int argc, char** argv) { int status; printf("allocate 100MB\n"); consume(100); printf("testcase1: fork inherit? \n"); printf(" expect: initial.self ~= child.self\n"); show_rusage("initial"); if (__fork()) { wait(&status); } else { show_rusage("fork child"); _exit(0); } printf("\n"); printf("testcase2: fork inherit? (cont.) \n"); printf(" expect: initial.children ~= 100MB, but child.children = 0\n"); show_rusage("initial"); if (__fork()) { wait(&status); } else { show_rusage("child"); _exit(0); } printf("\n"); printf("testcase3: fork + malloc \n"); printf(" expect: child.self ~= initial.self + 50MB\n"); show_rusage("initial"); if (__fork()) { wait(&status); } else { printf("allocate +50MB\n"); consume(50); show_rusage("fork child"); _exit(0); } printf("\n"); printf("testcase4: grandchild maxrss\n"); printf(" expect: post_wait.children ~= 300MB\n"); show_rusage("initial"); if (__fork()) { wait(&status); show_rusage("post_wait"); } else { system("./child -n 0 -g 300"); _exit(0); } printf("\n"); printf("testcase5: zombie\n"); printf(" expect: pre_wait ~= initial, IOW the zombie process is not accounted.\n"); printf(" post_wait ~= 400MB, IOW wait() collect child's max_rss. \n"); show_rusage("initial"); if (__fork()) { sleep(1); /* children become zombie */ show_rusage("pre_wait"); wait(&status); show_rusage("post_wait"); } else { system("./child -n 400"); _exit(0); } printf("\n"); printf("testcase6: SIG_IGN\n"); printf(" expect: initial ~= after_zombie (child's 500MB alloc should be ignored).\n"); show_rusage("initial"); signal(SIGCHLD, SIG_IGN); if (__fork()) { sleep(1); /* children become zombie */ show_rusage("after_zombie"); } else { system("./child -n 500"); _exit(0); } printf("\n"); signal(SIGCHLD, SIG_DFL); printf("testcase7: exec (without fork) \n"); printf(" expect: initial ~= exec \n"); show_rusage("initial"); execl("./child", "child", "-v", NULL); return 0; } child.c ======= #include #include #include #include #include #include #include #include #include #include #include "common.h" int main(int argc, char** argv) { int status; int c; long consume_size = 0; long grandchild_consume_size = 0; int show = 0; while ((c = getopt(argc, argv, "n:g:v")) != -1) { switch (c) { case 'n': consume_size = atol(optarg); break; case 'v': show = 1; break; case 'g': grandchild_consume_size = atol(optarg); break; default: break; } } if (show) show_rusage("exec"); if (consume_size) { printf("child alloc %ldMB\n", consume_size); consume(consume_size); } if (grandchild_consume_size) { if (fork()) { wait(&status); } else { printf("grandchild alloc %ldMB\n", grandchild_consume_size); consume(grandchild_consume_size); exit(0); } } return 0; } common.c ======== #include #include #include #include #include #include #include #include #include #include #include #include "common.h" #define err(str) perror(str), exit(1) void show_rusage(char *prefix) { int err, err2; struct rusage rusage_self; struct rusage rusage_children; printf("%s: ", prefix); err = getrusage(RUSAGE_SELF, &rusage_self); if (!err) printf("self %ld ", rusage_self.ru_maxrss); err2 = getrusage(RUSAGE_CHILDREN, &rusage_children); if (!err2) printf("children %ld ", rusage_children.ru_maxrss); printf("\n"); } /* Some buggy OS need this worthless CPU waste. */ void make_pagefault(void) { void *addr; int size = getpagesize(); int i; for (i=0; i<1000; i++) { addr = mmap(NULL, size, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANON, -1, 0); if (addr == MAP_FAILED) err("make_pagefault"); memset(addr, 0, size); munmap(addr, size); } } void consume(int mega) { size_t sz = mega * 1024 * 1024; void *ptr; ptr = malloc(sz); memset(ptr, 0, sz); make_pagefault(); } pid_t __fork(void) { pid_t pid; pid = fork(); make_pagefault(); return pid; } common.h ======== void show_rusage(char *prefix); void make_pagefault(void); void consume(int mega); pid_t __fork(void); FreeBSD result (expected result) ======================================================== allocate 100MB testcase1: fork inherit? expect: initial.self ~= child.self initial: self 103492 children 0 fork child: self 103540 children 0 testcase2: fork inherit? (cont.) expect: initial.children ~= 100MB, but child.children = 0 initial: self 103540 children 103540 child: self 103564 children 0 testcase3: fork + malloc expect: child.self ~= initial.self + 50MB initial: self 103564 children 103564 allocate +50MB fork child: self 154860 children 0 testcase4: grandchild maxrss expect: post_wait.children ~= 300MB initial: self 103564 children 154860 grandchild alloc 300MB post_wait: self 103564 children 308720 testcase5: zombie expect: pre_wait ~= initial, IOW the zombie process is not accounted. post_wait ~= 400MB, IOW wait() collect child's max_rss. initial: self 103564 children 308720 child alloc 400MB pre_wait: self 103564 children 308720 post_wait: self 103564 children 411312 testcase6: SIG_IGN expect: initial ~= after_zombie (child's 500MB alloc should be ignored). initial: self 103564 children 411312 child alloc 500MB after_zombie: self 103624 children 411312 testcase7: exec (without fork) expect: initial ~= exec initial: self 103624 children 411312 exec: self 103624 children 411312 Linux result (actual test result) ======================================================== allocate 100MB testcase1: fork inherit? expect: initial.self ~= child.self initial: self 102848 children 0 fork child: self 102572 children 0 testcase2: fork inherit? (cont.) expect: initial.children ~= 100MB, but child.children = 0 initial: self 102876 children 102644 child: self 102572 children 0 testcase3: fork + malloc expect: child.self ~= initial.self + 50MB initial: self 102876 children 102644 allocate +50MB fork child: self 153804 children 0 testcase4: grandchild maxrss expect: post_wait.children ~= 300MB initial: self 102876 children 153864 grandchild alloc 300MB post_wait: self 102876 children 307536 testcase5: zombie expect: pre_wait ~= initial, IOW the zombie process is not accounted. post_wait ~= 400MB, IOW wait() collect child's max_rss. initial: self 102876 children 307536 child alloc 400MB pre_wait: self 102876 children 307536 post_wait: self 102876 children 410076 testcase6: SIG_IGN expect: initial ~= after_zombie (child's 500MB alloc should be ignored). initial: self 102876 children 410076 child alloc 500MB after_zombie: self 102880 children 410076 testcase7: exec (without fork) expect: initial ~= exec initial: self 102880 children 410076 exec: self 102880 children 410076 Signed-off-by: Jiri Pirko Signed-off-by: KOSAKI Motohiro Cc: Oleg Nesterov Cc: Hugh Dickins Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/sched.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 97b10da0a3ea..6448bbc6406b 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -426,6 +426,15 @@ static inline unsigned long get_mm_hiwater_rss(struct mm_struct *mm) return max(mm->hiwater_rss, get_mm_rss(mm)); } +static inline void setmax_mm_hiwater_rss(unsigned long *maxrss, + struct mm_struct *mm) +{ + unsigned long hiwater_rss = get_mm_hiwater_rss(mm); + + if (*maxrss < hiwater_rss) + *maxrss = hiwater_rss; +} + static inline unsigned long get_mm_hiwater_vm(struct mm_struct *mm) { return max(mm->hiwater_vm, mm->total_vm); @@ -612,6 +621,7 @@ struct signal_struct { unsigned long nvcsw, nivcsw, cnvcsw, cnivcsw; unsigned long min_flt, maj_flt, cmin_flt, cmaj_flt; unsigned long inblock, oublock, cinblock, coublock; + unsigned long maxrss, cmaxrss; struct task_io_accounting ioac; /* -- cgit v1.2.3 From 8ea926b22e2d13238e4d65d8f61c48fe424e6f4f Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Tue, 22 Sep 2009 16:44:29 -0700 Subject: mmc: add 'enable' and 'disable' methods to mmc host MMC hosts that support power saving can use the 'enable' and 'disable' methods to exit and enter power saving states. An explanation of their use is provided in the comments added to include/linux/mmc/host.h. Signed-off-by: Adrian Hunter Acked-by: Matt Fleming Cc: Ian Molton Cc: "Roberto A. Foglietta" Cc: Jarkko Lavinen Cc: Denis Karpov Cc: Pierre Ossman Cc: Philip Langdale Cc: "Madhusudhan" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmc/host.h | 47 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 3e7615e9087e..338a9b3d51e4 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -51,6 +51,35 @@ struct mmc_ios { }; struct mmc_host_ops { + /* + * Hosts that support power saving can use the 'enable' and 'disable' + * methods to exit and enter power saving states. 'enable' is called + * when the host is claimed and 'disable' is called (or scheduled with + * a delay) when the host is released. The 'disable' is scheduled if + * the disable delay set by 'mmc_set_disable_delay()' is non-zero, + * otherwise 'disable' is called immediately. 'disable' may be + * scheduled repeatedly, to permit ever greater power saving at the + * expense of ever greater latency to re-enable. Rescheduling is + * determined by the return value of the 'disable' method. A positive + * value gives the delay in milliseconds. + * + * In the case where a host function (like set_ios) may be called + * with or without the host claimed, enabling and disabling can be + * done directly and will nest correctly. Call 'mmc_host_enable()' and + * 'mmc_host_lazy_disable()' for this purpose, but note that these + * functions must be paired. + * + * Alternatively, 'mmc_host_enable()' may be paired with + * 'mmc_host_disable()' which calls 'disable' immediately. In this + * case the 'disable' method will be called with 'lazy' set to 0. + * This is mainly useful for error paths. + * + * Because lazy disable may be called from a work queue, the 'disable' + * method must claim the host when 'lazy' != 0, which will work + * correctly because recursion is detected and handled. + */ + int (*enable)(struct mmc_host *host); + int (*disable)(struct mmc_host *host, int lazy); void (*request)(struct mmc_host *host, struct mmc_request *req); /* * Avoid calling these three functions too often or in a "fast path", @@ -118,6 +147,7 @@ struct mmc_host { #define MMC_CAP_SPI (1 << 4) /* Talks only SPI protocols */ #define MMC_CAP_NEEDS_POLL (1 << 5) /* Needs polling for card-detection */ #define MMC_CAP_8_BIT_DATA (1 << 6) /* Can the host do 8 bit transfers */ +#define MMC_CAP_DISABLE (1 << 7) /* Can the host be disabled */ /* host specific block data */ unsigned int max_seg_size; /* see blk_queue_max_segment_size */ @@ -142,6 +172,13 @@ struct mmc_host { unsigned int removed:1; /* host is being removed */ #endif + /* Only used with MMC_CAP_DISABLE */ + int enabled; /* host is enabled */ + int nesting_cnt; /* "enable" nesting count */ + int en_dis_recurs; /* detect recursion */ + unsigned int disable_delay; /* disable delay in msecs */ + struct delayed_work disable; /* disabling work */ + struct mmc_card *card; /* device attached to this host */ wait_queue_head_t wq; @@ -197,5 +234,15 @@ struct regulator; int mmc_regulator_get_ocrmask(struct regulator *supply); int mmc_regulator_set_ocr(struct regulator *supply, unsigned short vdd_bit); +int mmc_host_enable(struct mmc_host *host); +int mmc_host_disable(struct mmc_host *host); +int mmc_host_lazy_disable(struct mmc_host *host); + +static inline void mmc_set_disable_delay(struct mmc_host *host, + unsigned int disable_delay) +{ + host->disable_delay = disable_delay; +} + #endif -- cgit v1.2.3 From 319a3f1429c91147058ac26c5f5bac8ec1730bc6 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Tue, 22 Sep 2009 16:44:30 -0700 Subject: mmc: allow host claim / release nesting This change allows the MMC host to be claimed in situations where the host may or may not have already been claimed. Also 'mmc_try_claim_host()' is now exported. Signed-off-by: Adrian Hunter Acked-by: Matt Fleming Cc: Ian Molton Cc: "Roberto A. Foglietta" Cc: Jarkko Lavinen Cc: Denis Karpov Cc: Pierre Ossman Cc: Philip Langdale Cc: "Madhusudhan" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmc/core.h | 1 + include/linux/mmc/host.h | 2 ++ 2 files changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h index 7ac8b500d55c..e4898e9eeb59 100644 --- a/include/linux/mmc/core.h +++ b/include/linux/mmc/core.h @@ -139,6 +139,7 @@ extern unsigned int mmc_align_data_size(struct mmc_card *, unsigned int); extern int __mmc_claim_host(struct mmc_host *host, atomic_t *abort); extern void mmc_release_host(struct mmc_host *host); +extern int mmc_try_claim_host(struct mmc_host *host); /** * mmc_claim_host - exclusively claim a host diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 338a9b3d51e4..631a2fea5264 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -182,6 +182,8 @@ struct mmc_host { struct mmc_card *card; /* device attached to this host */ wait_queue_head_t wq; + struct task_struct *claimer; /* task that has host claimed */ + int claim_cnt; /* "claim" nesting count */ struct delayed_work detect; -- cgit v1.2.3 From 9feae246963c648b212abad0f0eb8938de5f5fe5 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Tue, 22 Sep 2009 16:44:32 -0700 Subject: mmc: add MMC_CAP_NONREMOVABLE host capability eMMC's are not removable, so unsafe resume is OK always. To permit this a new host capability MMC_CAP_NONREMOVABLE has been added and suspend / resume updated accordingly. Signed-off-by: Adrian Hunter Acked-by: Matt Fleming Cc: Ian Molton Cc: "Roberto A. Foglietta" Cc: Jarkko Lavinen Cc: Denis Karpov Cc: Pierre Ossman Cc: Philip Langdale Cc: "Madhusudhan" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmc/host.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 631a2fea5264..bb867d2c26bd 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -148,6 +148,7 @@ struct mmc_host { #define MMC_CAP_NEEDS_POLL (1 << 5) /* Needs polling for card-detection */ #define MMC_CAP_8_BIT_DATA (1 << 6) /* Can the host do 8 bit transfers */ #define MMC_CAP_DISABLE (1 << 7) /* Can the host be disabled */ +#define MMC_CAP_NONREMOVABLE (1 << 8) /* Nonremovable e.g. eMMC */ /* host specific block data */ unsigned int max_seg_size; /* see blk_queue_max_segment_size */ -- cgit v1.2.3 From eae1aeeed852aae37621b82a9e7f6c05096a18fd Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Tue, 22 Sep 2009 16:44:33 -0700 Subject: mmc: add ability to save power by powering off cards Power can be saved by powering off cards that are not in use. This is similar to suspend / resume except it is under the control of the driver, and does not require any power management support. It can only be used when the driver can monitor whether the card is removed, otherwise it is unsafe. This is possible because, unlike suspend, the driver still receives card detect and / or cover switch interrupts. Signed-off-by: Adrian Hunter Acked-by: Matt Fleming Cc: Ian Molton Cc: "Roberto A. Foglietta" Cc: Jarkko Lavinen Cc: Denis Karpov Cc: Pierre Ossman Cc: Philip Langdale Cc: "Madhusudhan" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmc/host.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index bb867d2c26bd..c1cbe598d470 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -223,6 +223,9 @@ static inline void *mmc_priv(struct mmc_host *host) extern int mmc_suspend_host(struct mmc_host *, pm_message_t); extern int mmc_resume_host(struct mmc_host *); +extern void mmc_power_save_host(struct mmc_host *host); +extern void mmc_power_restore_host(struct mmc_host *host); + extern void mmc_detect_change(struct mmc_host *, unsigned long delay); extern void mmc_request_done(struct mmc_host *, struct mmc_request *); -- cgit v1.2.3 From b1ebe38456f7fe61a88af2844361e763ac6ea5ae Mon Sep 17 00:00:00 2001 From: Jarkko Lavinen Date: Tue, 22 Sep 2009 16:44:34 -0700 Subject: mmc: add mmc card sleep and awake support Add support for the new MMC command SLEEP_AWAKE. Signed-off-by: Jarkko Lavinen Signed-off-by: Adrian Hunter Acked-by: Matt Fleming Cc: Ian Molton Cc: "Roberto A. Foglietta" Cc: Jarkko Lavinen Cc: Denis Karpov Cc: Pierre Ossman Cc: Philip Langdale Cc: "Madhusudhan" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmc/card.h | 2 ++ include/linux/mmc/host.h | 5 +++++ include/linux/mmc/mmc.h | 2 ++ 3 files changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 403aa505f27e..58f59174c64b 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -40,6 +40,8 @@ struct mmc_csd { }; struct mmc_ext_csd { + u8 rev; + unsigned int sa_timeout; /* Units: 100ns */ unsigned int hs_max_dtr; unsigned int sectors; }; diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index c1cbe598d470..81bb42358595 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -149,6 +149,7 @@ struct mmc_host { #define MMC_CAP_8_BIT_DATA (1 << 6) /* Can the host do 8 bit transfers */ #define MMC_CAP_DISABLE (1 << 7) /* Can the host be disabled */ #define MMC_CAP_NONREMOVABLE (1 << 8) /* Nonremovable e.g. eMMC */ +#define MMC_CAP_WAIT_WHILE_BUSY (1 << 9) /* Waits while card is busy */ /* host specific block data */ unsigned int max_seg_size; /* see blk_queue_max_segment_size */ @@ -240,6 +241,10 @@ struct regulator; int mmc_regulator_get_ocrmask(struct regulator *supply); int mmc_regulator_set_ocr(struct regulator *supply, unsigned short vdd_bit); +int mmc_card_awake(struct mmc_host *host); +int mmc_card_sleep(struct mmc_host *host); +int mmc_card_can_sleep(struct mmc_host *host); + int mmc_host_enable(struct mmc_host *host); int mmc_host_disable(struct mmc_host *host); int mmc_host_lazy_disable(struct mmc_host *host); diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 14b81f3e5232..b2b40951c16c 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -31,6 +31,7 @@ #define MMC_ALL_SEND_CID 2 /* bcr R2 */ #define MMC_SET_RELATIVE_ADDR 3 /* ac [31:16] RCA R1 */ #define MMC_SET_DSR 4 /* bc [31:16] RCA */ +#define MMC_SLEEP_AWAKE 5 /* ac [31:16] RCA 15:flg R1b */ #define MMC_SWITCH 6 /* ac [31:0] See below R1b */ #define MMC_SELECT_CARD 7 /* ac [31:16] RCA R1 */ #define MMC_SEND_EXT_CSD 8 /* adtc R1 */ @@ -254,6 +255,7 @@ struct _mmc_csd { #define EXT_CSD_CARD_TYPE 196 /* RO */ #define EXT_CSD_REV 192 /* RO */ #define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */ +#define EXT_CSD_S_A_TIMEOUT 217 /* * EXT_CSD field definitions -- cgit v1.2.3 From ef0b27d4ccacac32afc3d1c0e8a95e4091dfbc8c Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Tue, 22 Sep 2009 16:44:37 -0700 Subject: mmc: check status after MMC SWITCH command According to the standard, the SWITCH command should be followed by a SEND_STATUS command to check for errors. Signed-off-by: Adrian Hunter Acked-by: Matt Fleming Cc: Ian Molton Cc: "Roberto A. Foglietta" Cc: Jarkko Lavinen Cc: Denis Karpov Cc: Pierre Ossman Cc: Philip Langdale Cc: "Madhusudhan" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmc/mmc.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index b2b40951c16c..c02c8db73701 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -128,6 +128,7 @@ #define R1_STATUS(x) (x & 0xFFFFE000) #define R1_CURRENT_STATE(x) ((x & 0x00001E00) >> 9) /* sx, b (4 bits) */ #define R1_READY_FOR_DATA (1 << 8) /* sx, a */ +#define R1_SWITCH_ERROR (1 << 7) /* sx, c */ #define R1_APP_CMD (1 << 5) /* sr, c */ /* -- cgit v1.2.3 From 006ebd5de13854d6250eecc76866bbfad1ff7daf Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Tue, 22 Sep 2009 16:45:07 -0700 Subject: sdio: add CD disable support Add support to disconnect the pull-up resistor on CD/DAT[3] (pin 1) of the card. This may be desired on certain setups of boards, controllers and embedded sdio devices which do not need the card's pull-up. As a result, card detection is disabled and power is saved. [akpm@linux-foundation.org: simplify sdio_disable_cd() a bit] Signed-off-by: Ohad Ben-Cohen Acked-by: Matt Fleming Cc: Ian Molton Cc: "Roberto A. Foglietta" Cc: Philip Langdale Cc: Pierre Ossman Cc: David Vrabel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmc/card.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 58f59174c64b..00db39cceadc 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -64,7 +64,8 @@ struct sdio_cccr { low_speed:1, wide_bus:1, high_power:1, - high_speed:1; + high_speed:1, + disable_cd:1; }; struct sdio_cis { -- cgit v1.2.3 From 7c979ec7135d96bbff34790bf4b85a8508ede7fc Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Tue, 22 Sep 2009 16:45:18 -0700 Subject: sdio: add MMC_QUIRK_LENIENT_FN0 Normally writes to SDIO function 0 outside the vendor specific CCCR registers are prohibited. To support embedded devices that require writes to SDIO function 0 outside this range (e.g. TI WL127x embedded sdio wifi device), MMC_QUIRK_LENIENT_FN0 is introduced. A card quirks field is added to `struct mmc_card' to support non-standard devices (e.g. embedded sdio devices). [akpm@linux-foundation.org: code in C, not cpp!] Signed-off-by: Ohad Ben-Cohen Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmc/card.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 00db39cceadc..2ee22e8af110 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -97,6 +97,8 @@ struct mmc_card { #define MMC_STATE_READONLY (1<<1) /* card is read-only */ #define MMC_STATE_HIGHSPEED (1<<2) /* card is in high speed mode */ #define MMC_STATE_BLOCKADDR (1<<3) /* card uses block-addressing */ + unsigned int quirks; /* card quirks */ +#define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */ u32 raw_cid[4]; /* raw card CID */ u32 raw_csd[4]; /* raw card CSD */ @@ -132,6 +134,11 @@ struct mmc_card { #define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED) #define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR) +static inline int mmc_card_lenient_fn0(const struct mmc_card *c) +{ + return c->quirks & MMC_QUIRK_LENIENT_FN0; +} + #define mmc_card_name(c) ((c)->cid.prod_name) #define mmc_card_id(c) (dev_name(&(c)->dev)) -- cgit v1.2.3 From 996ad5686c5f868e67557cc1bfcb2cfdde1a18b4 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Tue, 22 Sep 2009 16:45:30 -0700 Subject: mmc: make SDIO device/driver struct accessors public Especially with the PM framework, those are quite handy to have in driver code too. Signed-off-by: Nicolas Pitre Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmc/sdio_func.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mmc/sdio_func.h b/include/linux/mmc/sdio_func.h index 451bdfc85830..ac3ab683fec6 100644 --- a/include/linux/mmc/sdio_func.h +++ b/include/linux/mmc/sdio_func.h @@ -67,6 +67,7 @@ struct sdio_func { #define sdio_get_drvdata(f) dev_get_drvdata(&(f)->dev) #define sdio_set_drvdata(f,d) dev_set_drvdata(&(f)->dev, d) +#define dev_to_sdio_func(d) container_of(d, struct sdio_func, dev) /* * SDIO function device driver @@ -81,6 +82,8 @@ struct sdio_driver { struct device_driver drv; }; +#define to_sdio_driver(d) container_of(d, struct sdio_driver, drv) + /** * SDIO_DEVICE - macro used to describe a specific SDIO device * @vend: the 16 bit manufacturer code -- cgit v1.2.3 From d899bf7b55f503ba7d3d07ed27c3a37e270fa7db Mon Sep 17 00:00:00 2001 From: Stefani Seibold Date: Tue, 22 Sep 2009 16:45:40 -0700 Subject: procfs: provide stack information for threads A patch to give a better overview of the userland application stack usage, especially for embedded linux. Currently you are only able to dump the main process/thread stack usage which is showed in /proc/pid/status by the "VmStk" Value. But you get no information about the consumed stack memory of the the threads. There is an enhancement in the /proc//{task/*,}/*maps and which marks the vm mapping where the thread stack pointer reside with "[thread stack xxxxxxxx]". xxxxxxxx is the maximum size of stack. This is a value information, because libpthread doesn't set the start of the stack to the top of the mapped area, depending of the pthread usage. A sample output of /proc//task//maps looks like: 08048000-08049000 r-xp 00000000 03:00 8312 /opt/z 08049000-0804a000 rw-p 00001000 03:00 8312 /opt/z 0804a000-0806b000 rw-p 00000000 00:00 0 [heap] a7d12000-a7d13000 ---p 00000000 00:00 0 a7d13000-a7f13000 rw-p 00000000 00:00 0 [thread stack: 001ff4b4] a7f13000-a7f14000 ---p 00000000 00:00 0 a7f14000-a7f36000 rw-p 00000000 00:00 0 a7f36000-a8069000 r-xp 00000000 03:00 4222 /lib/libc.so.6 a8069000-a806b000 r--p 00133000 03:00 4222 /lib/libc.so.6 a806b000-a806c000 rw-p 00135000 03:00 4222 /lib/libc.so.6 a806c000-a806f000 rw-p 00000000 00:00 0 a806f000-a8083000 r-xp 00000000 03:00 14462 /lib/libpthread.so.0 a8083000-a8084000 r--p 00013000 03:00 14462 /lib/libpthread.so.0 a8084000-a8085000 rw-p 00014000 03:00 14462 /lib/libpthread.so.0 a8085000-a8088000 rw-p 00000000 00:00 0 a8088000-a80a4000 r-xp 00000000 03:00 8317 /lib/ld-linux.so.2 a80a4000-a80a5000 r--p 0001b000 03:00 8317 /lib/ld-linux.so.2 a80a5000-a80a6000 rw-p 0001c000 03:00 8317 /lib/ld-linux.so.2 afaf5000-afb0a000 rw-p 00000000 00:00 0 [stack] ffffe000-fffff000 r-xp 00000000 00:00 0 [vdso] Also there is a new entry "stack usage" in /proc//{task/*,}/status which will you give the current stack usage in kb. A sample output of /proc/self/status looks like: Name: cat State: R (running) Tgid: 507 Pid: 507 . . . CapBnd: fffffffffffffeff voluntary_ctxt_switches: 0 nonvoluntary_ctxt_switches: 0 Stack usage: 12 kB I also fixed stack base address in /proc//{task/*,}/stat to the base address of the associated thread stack and not the one of the main process. This makes more sense. [akpm@linux-foundation.org: fs/proc/array.c now needs walk_page_range()] Signed-off-by: Stefani Seibold Cc: Ingo Molnar Cc: Peter Zijlstra Cc: Alexey Dobriyan Cc: "Eric W. Biederman" Cc: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/sched.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 6448bbc6406b..3cbc6c0be666 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1529,6 +1529,7 @@ struct task_struct { /* bitmask of trace recursion */ unsigned long trace_recursion; #endif /* CONFIG_TRACING */ + unsigned long stack_start; }; /* Future-safe accessor for struct task_struct's cpus_allowed. */ -- cgit v1.2.3 From 2ef43ec772551e975a6ea7cf22b59c84955aadf9 Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Tue, 22 Sep 2009 16:45:41 -0700 Subject: kcore: use usual list for kclist This patchset is for /proc/kcore. With this, - many per-arch hooks are removed. - /proc/kcore will know really valid physical memory area. - /proc/kcore will be aware of memory hotplug. - /proc/kcore will be architecture independent i.e. if an arch supports CONFIG_MMU, it can use /proc/kcore. (if the arch uses usual memory layout.) This patch: /proc/kcore uses its own list handling codes. It's better to use generic list codes. No changes in logic. just clean up. Signed-off-by: KAMEZAWA Hiroyuki Cc: Ralf Baechle Cc: Benjamin Herrenschmidt Cc: WANG Cong Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/proc_fs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h index e6e77d31c418..0aff2a62eba9 100644 --- a/include/linux/proc_fs.h +++ b/include/linux/proc_fs.h @@ -79,7 +79,7 @@ struct proc_dir_entry { }; struct kcore_list { - struct kcore_list *next; + struct list_head list; unsigned long addr; size_t size; }; -- cgit v1.2.3 From c30bb2a25fcfde6157e6154a32c14686fb0bedbe Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Tue, 22 Sep 2009 16:45:43 -0700 Subject: kcore: add kclist types Presently, kclist_add() only eats start address and size as its arguments. Considering to make kclist dynamically reconfigulable, it's necessary to know which kclists are for System RAM and which are not. This patch add kclist types as KCORE_RAM KCORE_VMALLOC KCORE_TEXT KCORE_OTHER This "type" is used in a patch following this for detecting KCORE_RAM. Signed-off-by: KAMEZAWA Hiroyuki Cc: Ralf Baechle Cc: Benjamin Herrenschmidt Cc: WANG Cong Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/proc_fs.h | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h index 0aff2a62eba9..bd7b840765a0 100644 --- a/include/linux/proc_fs.h +++ b/include/linux/proc_fs.h @@ -78,10 +78,18 @@ struct proc_dir_entry { struct list_head pde_openers; /* who did ->open, but not ->release */ }; +enum kcore_type { + KCORE_TEXT, + KCORE_VMALLOC, + KCORE_RAM, + KCORE_OTHER, +}; + struct kcore_list { struct list_head list; unsigned long addr; size_t size; + int type; }; struct vmcore { @@ -233,11 +241,12 @@ static inline void dup_mm_exe_file(struct mm_struct *oldmm, #endif /* CONFIG_PROC_FS */ #if !defined(CONFIG_PROC_KCORE) -static inline void kclist_add(struct kcore_list *new, void *addr, size_t size) +static inline void +kclist_add(struct kcore_list *new, void *addr, size_t size, int type) { } #else -extern void kclist_add(struct kcore_list *, void *, size_t); +extern void kclist_add(struct kcore_list *, void *, size_t, int type); #endif union proc_op { -- cgit v1.2.3 From 908eedc6168bd92e89f90d89fa389065a36358fa Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Tue, 22 Sep 2009 16:45:46 -0700 Subject: walk system ram range MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Originally, walk_memory_resource() was introduced to traverse all memory of "System RAM" for detecting memory hotplug/unplug range. For doing so, flags of IORESOUCE_MEM|IORESOURCE_BUSY was used and this was enough for memory hotplug. But for using other purpose, /proc/kcore, this may includes some firmware area marked as IORESOURCE_BUSY | IORESOUCE_MEM. This patch makes the check strict to find out busy "System RAM". Note: PPC64 keeps their own walk_memory_resouce(), which walk through ppc64's lmb informaton. Because old kclist_add() is called per lmb, this patch makes no difference in behavior, finally. And this patch removes CONFIG_MEMORY_HOTPLUG check from this function. Because pfn_valid() just show "there is memmap or not* and cannot be used for "there is physical memory or not", this function is useful in generic to scan physical memory range. Signed-off-by: KAMEZAWA Hiroyuki Cc: Ralf Baechle Cc: Benjamin Herrenschmidt Cc: WANG Cong Cc: Américo Wang Cc: David Rientjes Cc: Roland Dreier Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/ioport.h | 4 ++++ include/linux/memory_hotplug.h | 8 -------- 2 files changed, 4 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ioport.h b/include/linux/ioport.h index 786e7b8cece9..83aa81297ea3 100644 --- a/include/linux/ioport.h +++ b/include/linux/ioport.h @@ -184,5 +184,9 @@ extern void __devm_release_region(struct device *dev, struct resource *parent, extern int iomem_map_sanity_check(resource_size_t addr, unsigned long size); extern int iomem_is_exclusive(u64 addr); +extern int +walk_system_ram_range(unsigned long start_pfn, unsigned long nr_pages, + void *arg, int (*func)(unsigned long, unsigned long, void *)); + #endif /* __ASSEMBLY__ */ #endif /* _LINUX_IOPORT_H */ diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h index d95f72e79b82..fed969281a41 100644 --- a/include/linux/memory_hotplug.h +++ b/include/linux/memory_hotplug.h @@ -191,14 +191,6 @@ static inline void register_page_bootmem_info_node(struct pglist_data *pgdat) #endif /* ! CONFIG_MEMORY_HOTPLUG */ -/* - * Walk through all memory which is registered as resource. - * arg is (start_pfn, nr_pages, private_arg_pointer) - */ -extern int walk_memory_resource(unsigned long start_pfn, - unsigned long nr_pages, void *arg, - int (*func)(unsigned long, unsigned long, void *)); - #ifdef CONFIG_MEMORY_HOTREMOVE extern int is_mem_section_removable(unsigned long pfn, unsigned long nr_pages); -- cgit v1.2.3 From 26562c59fa9111ae3ea7b78045889662aac9e5ac Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Tue, 22 Sep 2009 16:45:49 -0700 Subject: kcore: register vmemmap range Benjamin Herrenschmidt pointed out that vmemmap range is not included in KCORE_RAM, KCORE_VMALLOC .... This adds KCORE_VMEMMAP if SPARSEMEM_VMEMMAP is used. By this, vmemmap can be readable via /proc/kcore Because it's not vmalloc area, vread/vwrite cannot be used. But the range is static against the memory layout, this patch handles vmemmap area by the same scheme with physical memory. This patch assumes SPARSEMEM_VMEMMAP range is not in VMALLOC range. It's correct now. [akpm@linux-foundation.org: fix typo] Signed-off-by: KAMEZAWA Hiroyuki Cc: Jiri Slaby Cc: Ralf Baechle Cc: Benjamin Herrenschmidt Cc: WANG Cong Cc: Benjamin Herrenschmidt Cc: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/proc_fs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h index bd7b840765a0..379eaed72d4b 100644 --- a/include/linux/proc_fs.h +++ b/include/linux/proc_fs.h @@ -82,6 +82,7 @@ enum kcore_type { KCORE_TEXT, KCORE_VMALLOC, KCORE_RAM, + KCORE_VMEMMAP, KCORE_OTHER, }; -- cgit v1.2.3 From 81ac3ad9061dd9cd490ee92f0c5316a14d77ce18 Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Tue, 22 Sep 2009 16:45:49 -0700 Subject: kcore: register module area in generic way Some archs define MODULED_VADDR/MODULES_END which is not in VMALLOC area. This is handled only in x86-64. This patch make it more generic. And we can use vread/vwrite to access the area. Fix it. Signed-off-by: KAMEZAWA Hiroyuki Cc: Jiri Slaby Cc: Ralf Baechle Cc: Benjamin Herrenschmidt Cc: WANG Cong Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mm.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index 5946e2ff9fe8..b6eae5e3144b 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -285,6 +285,14 @@ static inline int is_vmalloc_addr(const void *x) return 0; #endif } +#ifdef CONFIG_MMU +extern int is_vmalloc_or_module_addr(const void *x); +#else +static int is_vmalloc_or_module_addr(const void *x) +{ + return 0; +} +#endif static inline struct page *compound_head(struct page *page) { -- cgit v1.2.3 From a7e3108cca54c105f496919040f00df56767ec00 Mon Sep 17 00:00:00 2001 From: maximilian attems Date: Tue, 22 Sep 2009 16:45:53 -0700 Subject: ramfs: move RAMFS_MAGIC to include/linux/magic.h initramfs userspace likes to use this magic number. Cc: Hugh Dickins Signed-off-by: maximilian attems Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/magic.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/magic.h b/include/linux/magic.h index bce37786a0a5..76285e01b39e 100644 --- a/include/linux/magic.h +++ b/include/linux/magic.h @@ -12,6 +12,7 @@ #define SYSFS_MAGIC 0x62656572 #define SECURITYFS_MAGIC 0x73636673 #define SELINUX_MAGIC 0xf97cff8c +#define RAMFS_MAGIC 0x858458f6 /* some random number */ #define TMPFS_MAGIC 0x01021994 #define HUGETLBFS_MAGIC 0x958458f6 /* some random number */ #define SQUASHFS_MAGIC 0x73717368 -- cgit v1.2.3 From b73b255956119111dc18fa063d1e3a0bb3f06328 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 22 Sep 2009 16:46:00 -0700 Subject: spi.h: add missing kernel-doc for struct spi_master Add missing kernel-doc notation in spi.h for struct spi_master: Warning(include/linux/spi/spi.h:289): No description found for parameter 'mode_bits' Warning(include/linux/spi/spi.h:289): No description found for parameter 'flags' Signed-off-by: Randy Dunlap Acked-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/spi/spi.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index c47c4b4da97e..eb25cedb995b 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -207,6 +207,8 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * each slave has a chipselect signal, but it's common that not * every chipselect is connected to a slave. * @dma_alignment: SPI controller constraint on DMA buffers alignment. + * @mode_bits: flags understood by this controller driver + * @flags: other constraints relevant to this driver * @setup: updates the device mode and clocking records used by a * device's SPI controller; protocol code may call this. This * must fail if an unrecognized or unsupported mode is requested. -- cgit v1.2.3 From 75368bf6c2876d8f33abfe77aa3864869a3893eb Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Tue, 22 Sep 2009 16:46:04 -0700 Subject: spi: add support for device table matching With this patch spi drivers can use standard spi_driver.id_table and MODULE_DEVICE_TABLE() mechanisms to bind against the devices. Just like we do with I2C drivers. This is useful when a single driver supports several variants of devices but it is not possible to detect them in run-time (like non-JEDEC chips probing in drivers/mtd/devices/m25p80.c), and when platform_data usage is overkill. This patch also makes life a lot easier on OpenFirmware platforms, since with OF we extensively use proper device IDs in modaliases. Signed-off-by: Anton Vorontsov Cc: David Brownell Cc: David Woodhouse Cc: Grant Likely Cc: Jean Delvare Cc: Ben Dooks Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mod_devicetable.h | 10 ++++++++++ include/linux/spi/spi.h | 10 ++++++++-- 2 files changed, 18 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index 1bf5900ffe43..b34f1ef2f1fe 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -399,6 +399,16 @@ struct i2c_device_id { __attribute__((aligned(sizeof(kernel_ulong_t)))); }; +/* spi */ + +#define SPI_NAME_SIZE 32 + +struct spi_device_id { + char name[SPI_NAME_SIZE]; + kernel_ulong_t driver_data /* Data private to the driver */ + __attribute__((aligned(sizeof(kernel_ulong_t)))); +}; + /* dmi */ enum dmi_field { DMI_NONE, diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index eb25cedb995b..e2051f39f6a8 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -20,6 +20,7 @@ #define __LINUX_SPI_H #include +#include /* * INTERFACES between SPI master-side drivers and SPI infrastructure. @@ -86,7 +87,7 @@ struct spi_device { int irq; void *controller_state; void *controller_data; - char modalias[32]; + char modalias[SPI_NAME_SIZE]; /* * likely need more hooks for more protocol options affecting how @@ -145,6 +146,7 @@ struct spi_message; /** * struct spi_driver - Host side "protocol" driver + * @id_table: List of SPI devices supported by this driver * @probe: Binds this driver to the spi device. Drivers can verify * that the device is actually present, and may need to configure * characteristics (such as bits_per_word) which weren't needed for @@ -170,6 +172,7 @@ struct spi_message; * MMC, RTC, filesystem character device nodes, and hardware monitoring. */ struct spi_driver { + const struct spi_device_id *id_table; int (*probe)(struct spi_device *spi); int (*remove)(struct spi_device *spi); void (*shutdown)(struct spi_device *spi); @@ -734,7 +737,7 @@ struct spi_board_info { * controller_data goes to spi_device.controller_data, * irq is copied too */ - char modalias[32]; + char modalias[SPI_NAME_SIZE]; const void *platform_data; void *controller_data; int irq; @@ -802,4 +805,7 @@ spi_unregister_device(struct spi_device *spi) device_unregister(&spi->dev); } +extern const struct spi_device_id * +spi_get_device_id(const struct spi_device *sdev); + #endif /* __LINUX_SPI_H */ -- cgit v1.2.3 From e0626e3844e8f430fc1a4417f523a00797df7ca6 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Tue, 22 Sep 2009 16:46:08 -0700 Subject: spi: prefix modalias with "spi:" This makes it consistent with other buses (platform, i2c, vio, ...). I'm not sure why we use the prefixes, but there must be a reason. This was easy enough to do it, and I did it. Signed-off-by: Anton Vorontsov Cc: David Brownell Cc: David Woodhouse Cc: Grant Likely Cc: Jean Delvare Cc: Ben Dooks Cc: Benjamin Herrenschmidt Cc: Dmitry Torokhov Cc: Samuel Ortiz Cc: "John W. Linville" Acked-by: Mike Frysinger Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mod_devicetable.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index b34f1ef2f1fe..f58e9d836f32 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -402,6 +402,7 @@ struct i2c_device_id { /* spi */ #define SPI_NAME_SIZE 32 +#define SPI_MODULE_PREFIX "spi:" struct spi_device_id { char name[SPI_NAME_SIZE]; -- cgit v1.2.3 From 568d0697f42771425ae9f1e9a3db769fef7e10b6 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 22 Sep 2009 16:46:18 -0700 Subject: spi: handle TX-only/RX-only Support two new half-duplex SPI implementation restrictions, for links that talk to TX-only or RX-only devices. (Existing half-duplex flavors support both transfer directions, just not at the same time.) Move spi_async() into the spi.c core, and stop inlining it. Then make that function perform error checks and reject messages that demand more than the underlying controller can support. Based on a patch from Marek Szyprowski which did this only for the bitbanged GPIO driver. Cc: Marek Szyprowski Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/spi/spi.h | 39 +++------------------------------------ 1 file changed, 3 insertions(+), 36 deletions(-) (limited to 'include/linux') diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index e2051f39f6a8..97b60b37f445 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -258,6 +258,8 @@ struct spi_master { /* other constraints relevant to this driver */ u16 flags; #define SPI_MASTER_HALF_DUPLEX BIT(0) /* can't do full duplex */ +#define SPI_MASTER_NO_RX BIT(1) /* can't do buffer read */ +#define SPI_MASTER_NO_TX BIT(2) /* can't do buffer write */ /* Setup mode and clock, etc (spi driver may call many times). * @@ -538,42 +540,7 @@ static inline void spi_message_free(struct spi_message *m) } extern int spi_setup(struct spi_device *spi); - -/** - * spi_async - asynchronous SPI transfer - * @spi: device with which data will be exchanged - * @message: describes the data transfers, including completion callback - * Context: any (irqs may be blocked, etc) - * - * This call may be used in_irq and other contexts which can't sleep, - * as well as from task contexts which can sleep. - * - * The completion callback is invoked in a context which can't sleep. - * Before that invocation, the value of message->status is undefined. - * When the callback is issued, message->status holds either zero (to - * indicate complete success) or a negative error code. After that - * callback returns, the driver which issued the transfer request may - * deallocate the associated memory; it's no longer in use by any SPI - * core or controller driver code. - * - * Note that although all messages to a spi_device are handled in - * FIFO order, messages may go to different devices in other orders. - * Some device might be higher priority, or have various "hard" access - * time requirements, for example. - * - * On detection of any fault during the transfer, processing of - * the entire message is aborted, and the device is deselected. - * Until returning from the associated message completion callback, - * no other spi_message queued to that device will be processed. - * (This rule applies equally to all the synchronous transfer calls, - * which are wrappers around this core asynchronous primitive.) - */ -static inline int -spi_async(struct spi_device *spi, struct spi_message *message) -{ - message->spi = spi; - return spi->master->transfer(spi, message); -} +extern int spi_async(struct spi_device *spi, struct spi_message *message); /*---------------------------------------------------------------------------*/ -- cgit v1.2.3 From a4177ee7f1a83eecb1d75e85d32664b023ef65e9 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Tue, 22 Sep 2009 16:46:33 -0700 Subject: gpiolib: allow exported GPIO nodes to be named using sysfs links Commit 926b663ce8215ba448960e1ff6e58b67a2c3b99b (gpiolib: allow GPIOs to be named) already provides naming on the chip level. This patch provides more flexibility by allowing multiple names where ever in sysfs on a per GPIO basis. Adapted from David Brownell's comments on a similar concept: http://lkml.org/lkml/2009/4/20/203. [randy.dunlap@oracle.com: fix build for CONFIG_GENERIC_GPIO=n] Signed-off-by: Jani Nikula Acked-by: David Brownell Cc: Daniel Silverstone Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/gpio.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/linux') diff --git a/include/linux/gpio.h b/include/linux/gpio.h index e10c49a5b96e..059bd189d35d 100644 --- a/include/linux/gpio.h +++ b/include/linux/gpio.h @@ -12,6 +12,8 @@ #include #include +struct device; + /* * Some platforms don't support the GPIO programming interface. * @@ -89,6 +91,15 @@ static inline int gpio_export(unsigned gpio, bool direction_may_change) return -EINVAL; } +static inline int gpio_export_link(struct device *dev, const char *name, + unsigned gpio) +{ + /* GPIO can never have been exported */ + WARN_ON(1); + return -EINVAL; +} + + static inline void gpio_unexport(unsigned gpio) { /* GPIO can never have been exported */ -- cgit v1.2.3 From 1e5db00687c1ebd93a902caf1d3694209013cb3e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Richard=20R=C3=B6jfors?= Date: Tue, 22 Sep 2009 16:46:34 -0700 Subject: gpio: add MC33880 driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A GPIO driver for the Freescale MC33880 High/Low side switch Signed-off-by: Richard Röjfors Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/spi/mc33880.h | 10 ++++++++++ 1 file changed, 10 insertions(+) create mode 100644 include/linux/spi/mc33880.h (limited to 'include/linux') diff --git a/include/linux/spi/mc33880.h b/include/linux/spi/mc33880.h new file mode 100644 index 000000000000..82ffccd6fbe5 --- /dev/null +++ b/include/linux/spi/mc33880.h @@ -0,0 +1,10 @@ +#ifndef LINUX_SPI_MC33880_H +#define LINUX_SPI_MC33880_H + +struct mc33880_platform_data { + /* number assigned to the first GPIO */ + unsigned base; +}; + +#endif + -- cgit v1.2.3 From 4cf8e53b3b55fa2f9b2a6b9c3e557b649adf7c6a Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 22 Sep 2009 16:46:35 -0700 Subject: mfd/gpio: add a GPIO interface to the UCB1400 MFD chip driver via gpiolib Cc: Eric Miao Cc: Russell King Cc: David Brownell Cc: Samuel Ortiz Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/ucb1400.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ucb1400.h b/include/linux/ucb1400.h index ae779bb8cc0f..adb44066680c 100644 --- a/include/linux/ucb1400.h +++ b/include/linux/ucb1400.h @@ -26,6 +26,7 @@ #include #include #include +#include /* * UCB1400 AC-link registers @@ -82,6 +83,17 @@ #define UCB_ID 0x7e #define UCB_ID_1400 0x4304 +struct ucb1400_gpio_data { + int gpio_offset; + int (*gpio_setup)(struct device *dev, int ngpio); + int (*gpio_teardown)(struct device *dev, int ngpio); +}; + +struct ucb1400_gpio { + struct gpio_chip gc; + struct snd_ac97 *ac97; +}; + struct ucb1400_ts { struct input_dev *ts_idev; struct task_struct *ts_task; @@ -95,6 +107,7 @@ struct ucb1400_ts { struct ucb1400 { struct platform_device *ucb1400_ts; + struct platform_device *ucb1400_gpio; }; static inline u16 ucb1400_reg_read(struct snd_ac97 *ac97, u16 reg) @@ -147,4 +160,10 @@ static inline void ucb1400_adc_disable(struct snd_ac97 *ac97) unsigned int ucb1400_adc_read(struct snd_ac97 *ac97, u16 adc_channel, int adcsync); +#ifdef CONFIG_GPIO_UCB1400 +void __init ucb1400_gpio_set_data(struct ucb1400_gpio_data *data); +#else +static inline void ucb1400_gpio_set_data(struct ucb1400_gpio_data *data) {} +#endif + #endif -- cgit v1.2.3 From 4fefce9abaeef0d6ec45e06a882db23a65135272 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Tue, 22 Sep 2009 16:48:02 -0700 Subject: jbd.h: bitfields should be unsigned bitfields should be unsigned. This fixes sparse noise: error: dubious one-bit signed bitfield Signed-off-by: H Hartley Sweeten Cc: Jan Kara Cc: Theodore Ts'o Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/jbd.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/jbd.h b/include/linux/jbd.h index a1187a0c99b4..331530cd3cc6 100644 --- a/include/linux/jbd.h +++ b/include/linux/jbd.h @@ -556,7 +556,7 @@ struct transaction_s * This transaction is being forced and some process is * waiting for it to finish. */ - int t_synchronous_commit:1; + unsigned int t_synchronous_commit:1; }; /** -- cgit v1.2.3 From 4fd8da8d62416d0dae05603ab5990a498d9aeb12 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 23 Sep 2009 17:49:55 +0200 Subject: fs: change sys_truncate length parameter type For this system call user space passes a signed long length parameter, while the kernel side takes an unsigned long parameter and converts it later to signed long again. This has led to bugs in compat wrappers see e.g. dd90bbd5 "powerpc: Add compat_sys_truncate". The s390 compat wrapper for this functions is broken as well since it also performs zero extension instead of sign extension for the length parameter. In addition if hpa comes up with an automated way of generating compat wrappers it would generate a wrong one here. So change the length parameter from unsigned long to long. Cc: "H. Peter Anvin" Cc: Al Viro Cc: Christoph Hellwig Signed-off-by: Heiko Carstens Signed-off-by: Linus Torvalds --- include/linux/syscalls.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 8d8285a10db9..a990ace1a838 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -460,8 +460,7 @@ asmlinkage long sys_mount(char __user *dev_name, char __user *dir_name, void __user *data); asmlinkage long sys_umount(char __user *name, int flags); asmlinkage long sys_oldumount(char __user *name); -asmlinkage long sys_truncate(const char __user *path, - unsigned long length); +asmlinkage long sys_truncate(const char __user *path, long length); asmlinkage long sys_ftruncate(unsigned int fd, unsigned long length); asmlinkage long sys_stat(char __user *filename, struct __old_kernel_stat __user *statbuf); -- cgit v1.2.3 From 74908a0009eb36054190ab80deb9671014efed96 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 17 Sep 2009 17:47:12 -0700 Subject: include/linux/cred.h: fix build mips allmodconfig: include/linux/cred.h: In function `creds_are_invalid': include/linux/cred.h:187: error: `PAGE_SIZE' undeclared (first use in this function) include/linux/cred.h:187: error: (Each undeclared identifier is reported only once include/linux/cred.h:187: error: for each function it appears in.) Fixes commit b6dff3ec5e116e3af6f537d4caedcad6b9e5082a Author: David Howells AuthorDate: Fri Nov 14 10:39:16 2008 +1100 Commit: James Morris CommitDate: Fri Nov 14 10:39:16 2008 +1100 CRED: Separate task security context from task_struct I think. It's way too large to be inlined anyway. Dunno if this needs an EXPORT_SYMBOL() yet. Cc: David Howells Cc: James Morris Cc: Serge Hallyn Signed-off-by: Andrew Morton Acked-by: David Howells Signed-off-by: James Morris --- include/linux/cred.h | 18 +----------------- 1 file changed, 1 insertion(+), 17 deletions(-) (limited to 'include/linux') diff --git a/include/linux/cred.h b/include/linux/cred.h index fb371601a3b4..4e3387a89cb9 100644 --- a/include/linux/cred.h +++ b/include/linux/cred.h @@ -176,23 +176,7 @@ extern void __invalid_creds(const struct cred *, const char *, unsigned); extern void __validate_process_creds(struct task_struct *, const char *, unsigned); -static inline bool creds_are_invalid(const struct cred *cred) -{ - if (cred->magic != CRED_MAGIC) - return true; - if (atomic_read(&cred->usage) < atomic_read(&cred->subscribers)) - return true; -#ifdef CONFIG_SECURITY_SELINUX - if (selinux_is_enabled()) { - if ((unsigned long) cred->security < PAGE_SIZE) - return true; - if ((*(u32 *)cred->security & 0xffffff00) == - (POISON_FREE << 24 | POISON_FREE << 16 | POISON_FREE << 8)) - return true; - } -#endif - return false; -} +extern bool creds_are_invalid(const struct cred *cred); static inline void __validate_creds(const struct cred *cred, const char *file, unsigned line) -- cgit v1.2.3 From 1b9894f342a39601bb0420b7b8c7e445670c1b51 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 21 Sep 2009 11:12:03 -0700 Subject: serial core: fix new kernel-doc warnings Fix new kernel-doc warnings in serial_core.[hc] files. Warning(include/linux/serial_core.h:485): No description found for parameter 'uport' Warning(include/linux/serial_core.h:485): Excess function parameter 'port' description in 'uart_handle_dcd_change' Warning(include/linux/serial_core.h:511): No description found for parameter 'uport' Warning(include/linux/serial_core.h:511): Excess function parameter 'port' description in 'uart_handle_cts_change' Warning(drivers/serial/serial_core.c:2437): No description found for parameter 'uport' Warning(drivers/serial/serial_core.c:2437): Excess function parameter 'port' description in 'uart_add_one_port' Warning(drivers/serial/serial_core.c:2509): No description found for parameter 'uport' Warning(drivers/serial/serial_core.c:2509): Excess function parameter 'port' description in 'uart_remove_one_port' Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- include/linux/serial_core.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index d58e460844dd..fe661afe0713 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -477,7 +477,7 @@ static inline int uart_handle_break(struct uart_port *port) /** * uart_handle_dcd_change - handle a change of carrier detect state - * @port: uart_port structure for the open port + * @uport: uart_port structure for the open port * @status: new carrier detect status, nonzero if active */ static inline void @@ -503,7 +503,7 @@ uart_handle_dcd_change(struct uart_port *uport, unsigned int status) /** * uart_handle_cts_change - handle a change of clear-to-send state - * @port: uart_port structure for the open port + * @uport: uart_port structure for the open port * @status: new clear to send status, nonzero if active */ static inline void -- cgit v1.2.3 From 97363c6a4f93a20380b4a9e11f35e27fed68a517 Mon Sep 17 00:00:00 2001 From: Benny Halevy Date: Wed, 23 Sep 2009 14:36:38 -0400 Subject: sunrpc: xdr_xcode_hyper helpers cannot presume 64-bit alignment Signed-off-by: Benny Halevy Signed-off-by: Trond Myklebust --- include/linux/sunrpc/xdr.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/xdr.h b/include/linux/sunrpc/xdr.h index 7da466ba4b0d..f5cc0898bc53 100644 --- a/include/linux/sunrpc/xdr.h +++ b/include/linux/sunrpc/xdr.h @@ -11,6 +11,7 @@ #include #include +#include #include /* @@ -117,14 +118,14 @@ static inline __be32 *xdr_encode_array(__be32 *p, const void *s, unsigned int le static inline __be32 * xdr_encode_hyper(__be32 *p, __u64 val) { - *(__be64 *)p = cpu_to_be64(val); + put_unaligned_be64(val, p); return p + 2; } static inline __be32 * xdr_decode_hyper(__be32 *p, __u64 *valp) { - *valp = be64_to_cpup((__be64 *)p); + *valp = get_unaligned_be64(p); return p + 2; } -- cgit v1.2.3 From a0219d948dd712561817b0d7c95fd2f10b698203 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 24 Sep 2009 09:34:35 -0600 Subject: cpumask: remove dangerous CPU_MASK_ALL_PTR (Thanks to Al Viro for reminding me of this, via Ingo) CPU_MASK_ALL is the (deprecated) "all bits set" cpumask, defined as so: #define CPU_MASK_ALL (cpumask_t) { { ... } } Taking the address of such a temporary is questionable at best, unfortunately 321a8e9d (cpumask: add CPU_MASK_ALL_PTR macro) added CPU_MASK_ALL_PTR: #define CPU_MASK_ALL_PTR (&CPU_MASK_ALL) Which formalizes this practice. One day gcc could bite us over this usage (though we seem to have gotten away with it so far). Now all callers are removed, we kill it. Signed-off-by: Rusty Russell Acked-by: Ingo Molnar Reported-by: Al Viro Cc: Mike Travis --- include/linux/cpumask.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h index 9b1d458aac6e..c0ab3588129d 100644 --- a/include/linux/cpumask.h +++ b/include/linux/cpumask.h @@ -324,8 +324,6 @@ static inline const struct cpumask *get_cpu_mask(unsigned int cpu) [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \ } } -#define CPU_MASK_ALL_PTR (&CPU_MASK_ALL) - #else #define CPU_MASK_ALL \ @@ -336,7 +334,6 @@ static inline const struct cpumask *get_cpu_mask(unsigned int cpu) /* cpu_mask_all is in init/main.c */ extern cpumask_t cpu_mask_all; -#define CPU_MASK_ALL_PTR (&cpu_mask_all) #endif -- cgit v1.2.3 From 72d78d05cbaa69f2a32f5f9d65a4551ba0da571f Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 24 Sep 2009 09:34:36 -0600 Subject: cpumask: remove unused cpu_mask_all It's only defined for NR_CPUS > BITS_PER_LONG; cpu_all_mask is always defined (and const). Signed-off-by: Rusty Russell --- include/linux/cpumask.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h index c0ab3588129d..dbb8367ecf56 100644 --- a/include/linux/cpumask.h +++ b/include/linux/cpumask.h @@ -332,9 +332,6 @@ static inline const struct cpumask *get_cpu_mask(unsigned int cpu) [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \ } } -/* cpu_mask_all is in init/main.c */ -extern cpumask_t cpu_mask_all; - #endif #define CPU_MASK_NONE \ -- cgit v1.2.3 From ef79f8e191722dbc1fc33bdfc448f572266c37e9 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 24 Sep 2009 09:34:37 -0600 Subject: cpumask: remove unused mask field from struct irqaction. Up until 1.1.83, the primitive human tribes used struct sigaction for interrupts. The sa_mask field was overloaded to hold a pointer to the name. When someone created the new "struct irqaction" they carried across the "mask" field as a kind of ancestor worship: the fact that it was unused makes clear its spiritual significance. Signed-off-by: Rusty Russell --- include/linux/interrupt.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index 8e9e151f811e..894ed7180bff 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -97,7 +97,6 @@ typedef irqreturn_t (*irq_handler_t)(int, void *); struct irqaction { irq_handler_t handler; unsigned long flags; - cpumask_t mask; const char *name; void *dev_id; struct irqaction *next; -- cgit v1.2.3 From 144e2ce6115c0a1ee4cb5c935360ea4e2966b0ce Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Mon, 15 Jun 2009 12:16:54 +0900 Subject: cpumask: Remove mask field from comments By 7be23e278f, mask field was deleted by irqaction. However, it was not deleted from comment. Signed-off-by: Nobuhiro Iwamatsu CC: Rusty Russell Signed-off-by: Rusty Russell --- include/linux/interrupt.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index 894ed7180bff..b78cf8194957 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -84,7 +84,6 @@ typedef irqreturn_t (*irq_handler_t)(int, void *); * struct irqaction - per interrupt action descriptor * @handler: interrupt handler function * @flags: flags (see IRQF_* above) - * @mask: no comment as it is useless and about to be removed * @name: name of the device * @dev_id: cookie to identify the device * @next: pointer to the next irqaction for shared interrupts -- cgit v1.2.3 From e0ad955680878998ff7dc51ce06ddad12260423a Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 24 Sep 2009 09:34:38 -0600 Subject: cpumask: don't define set_cpus_allowed() if CONFIG_CPUMASK_OFFSTACK=y You're not supposed to pass cpumasks on the stack in that case. Signed-off-by: Rusty Russell --- include/linux/sched.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index cbf2a3b46280..848d1f20086e 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1817,10 +1817,13 @@ static inline int set_cpus_allowed_ptr(struct task_struct *p, return 0; } #endif + +#ifndef CONFIG_CPUMASK_OFFSTACK static inline int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask) { return set_cpus_allowed_ptr(p, &new_mask); } +#endif /* * Architectures can set this to 1 if they have specified -- cgit v1.2.3 From fe71a3c7dc8cfe0f239c04b4fc6501f4aa56aa0a Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 24 Sep 2009 09:34:40 -0600 Subject: cpumask: remove the deprecated smp_call_function_mask() Everyone is now using smp_call_function_many(). Signed-off-by: Rusty Russell --- include/linux/smp.h | 11 ----------- 1 file changed, 11 deletions(-) (limited to 'include/linux') diff --git a/include/linux/smp.h b/include/linux/smp.h index 9e3d8af09207..39c64bae776d 100644 --- a/include/linux/smp.h +++ b/include/linux/smp.h @@ -73,15 +73,6 @@ int smp_call_function(void(*func)(void *info), void *info, int wait); void smp_call_function_many(const struct cpumask *mask, void (*func)(void *info), void *info, bool wait); -/* Deprecated: Use smp_call_function_many which takes a pointer to the mask. */ -static inline int -smp_call_function_mask(cpumask_t mask, void(*func)(void *info), void *info, - int wait) -{ - smp_call_function_many(&mask, func, info, wait); - return 0; -} - void __smp_call_function_single(int cpuid, struct call_single_data *data, int wait); @@ -144,8 +135,6 @@ static inline int up_smp_call_function(void (*func)(void *), void *info) static inline void smp_send_reschedule(int cpu) { } #define num_booting_cpus() 1 #define smp_prepare_boot_cpu() do {} while (0) -#define smp_call_function_mask(mask, func, info, wait) \ - (up_smp_call_function(func, info)) #define smp_call_function_many(mask, func, info, wait) \ (up_smp_call_function(func, info)) static inline void init_call_single_data(void) -- cgit v1.2.3 From 6f401420e2822c24c36e6e1c657f6e7f7f777a93 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 24 Sep 2009 09:34:40 -0600 Subject: cpumask: remove obsolete topology_core_siblings and topology_thread_siblings: core There were replaced by topology_core_cpumask and topology_thread_cpumask. Signed-off-by: Rusty Russell --- include/linux/topology.h | 6 ------ 1 file changed, 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/topology.h b/include/linux/topology.h index 809b26c07090..fc0bf3edeb67 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -211,12 +211,6 @@ int arch_update_cpu_topology(void); #ifndef topology_core_id #define topology_core_id(cpu) ((void)(cpu), 0) #endif -#ifndef topology_thread_siblings -#define topology_thread_siblings(cpu) cpumask_of_cpu(cpu) -#endif -#ifndef topology_core_siblings -#define topology_core_siblings(cpu) cpumask_of_cpu(cpu) -#endif #ifndef topology_thread_cpumask #define topology_thread_cpumask(cpu) cpumask_of(cpu) #endif -- cgit v1.2.3 From 4b805b17382c11a8b1c9bb8053ce9d1dcde0701a Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 24 Sep 2009 09:34:52 -0600 Subject: cpumask: remove unused deprecated functions, avoid accusations of insanity We're not forcing removal of the old cpu_ functions, but we might as well delete the now-unused ones. Especially CPUMASK_ALLOC and friends. I actually got a phone call (!) from a hacker who thought I had introduced them as the new cpumask API. He seemed bewildered that I had lost all taste. Signed-off-by: Rusty Russell Cc: benh@kernel.crashing.org --- include/linux/cpumask.h | 112 +----------------------------------------------- 1 file changed, 1 insertion(+), 111 deletions(-) (limited to 'include/linux') diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h index dbb8367ecf56..e162d13c65ab 100644 --- a/include/linux/cpumask.h +++ b/include/linux/cpumask.h @@ -15,10 +15,6 @@ * see bitmap_scnprintf() and bitmap_parse_user() in lib/bitmap.c. * For details of cpulist_scnprintf() and cpulist_parse(), see * bitmap_scnlistprintf() and bitmap_parselist(), also in bitmap.c. - * For details of cpu_remap(), see bitmap_bitremap in lib/bitmap.c - * For details of cpus_remap(), see bitmap_remap in lib/bitmap.c. - * For details of cpus_onto(), see bitmap_onto in lib/bitmap.c. - * For details of cpus_fold(), see bitmap_fold in lib/bitmap.c. * * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * Note: The alternate operations with the suffix "_nr" are used @@ -47,22 +43,17 @@ * void cpus_or(dst, src1, src2) dst = src1 | src2 [union] * void cpus_xor(dst, src1, src2) dst = src1 ^ src2 * int cpus_andnot(dst, src1, src2) dst = src1 & ~src2 - * void cpus_complement(dst, src) dst = ~src * * int cpus_equal(mask1, mask2) Does mask1 == mask2? * int cpus_intersects(mask1, mask2) Do mask1 and mask2 intersect? * int cpus_subset(mask1, mask2) Is mask1 a subset of mask2? * int cpus_empty(mask) Is mask empty (no bits sets)? - * int cpus_full(mask) Is mask full (all bits sets)? * int cpus_weight(mask) Hamming weigh - number of set bits - * int cpus_weight_nr(mask) Same using nr_cpu_ids instead of NR_CPUS * - * void cpus_shift_right(dst, src, n) Shift right * void cpus_shift_left(dst, src, n) Shift left * * int first_cpu(mask) Number lowest set bit, or NR_CPUS * int next_cpu(cpu, mask) Next cpu past 'cpu', or NR_CPUS - * int next_cpu_nr(cpu, mask) Next cpu past 'cpu', or nr_cpu_ids * * cpumask_t cpumask_of_cpu(cpu) Return cpumask with bit 'cpu' set * (can be used as an lvalue) @@ -70,45 +61,10 @@ * CPU_MASK_NONE Initializer - no bits set * unsigned long *cpus_addr(mask) Array of unsigned long's in mask * - * CPUMASK_ALLOC kmalloc's a structure that is a composite of many cpumask_t - * variables, and CPUMASK_PTR provides pointers to each field. - * - * The structure should be defined something like this: - * struct my_cpumasks { - * cpumask_t mask1; - * cpumask_t mask2; - * }; - * - * Usage is then: - * CPUMASK_ALLOC(my_cpumasks); - * CPUMASK_PTR(mask1, my_cpumasks); - * CPUMASK_PTR(mask2, my_cpumasks); - * - * --- DO NOT reference cpumask_t pointers until this check --- - * if (my_cpumasks == NULL) - * "kmalloc failed"... - * - * References are now pointers to the cpumask_t variables (*mask1, ...) - * - *if NR_CPUS > BITS_PER_LONG - * CPUMASK_ALLOC(m) Declares and allocates struct m *m = - * kmalloc(sizeof(*m), GFP_KERNEL) - * CPUMASK_FREE(m) Macro for kfree(m) - *else - * CPUMASK_ALLOC(m) Declares struct m _m, *m = &_m - * CPUMASK_FREE(m) Nop - *endif - * CPUMASK_PTR(v, m) Declares cpumask_t *v = &(m->v) - * ------------------------------------------------------------------------ - * * int cpumask_scnprintf(buf, len, mask) Format cpumask for printing * int cpumask_parse_user(ubuf, ulen, mask) Parse ascii string as cpumask * int cpulist_scnprintf(buf, len, mask) Format cpumask as list for printing * int cpulist_parse(buf, map) Parse ascii string as cpulist - * int cpu_remap(oldbit, old, new) newbit = map(old, new)(oldbit) - * void cpus_remap(dst, src, old, new) *dst = map(old, new)(src) - * void cpus_onto(dst, orig, relmap) *dst = orig relative to relmap - * void cpus_fold(dst, orig, sz) dst bits = orig bits mod sz * * for_each_cpu_mask(cpu, mask) for-loop cpu over mask using NR_CPUS * for_each_cpu_mask_nr(cpu, mask) for-loop cpu over mask using nr_cpu_ids @@ -142,7 +98,6 @@ #include typedef struct cpumask { DECLARE_BITMAP(bits, NR_CPUS); } cpumask_t; -extern cpumask_t _unused_cpumask_arg_; #ifndef CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS #define cpu_set(cpu, dst) __cpu_set((cpu), &(dst)) @@ -207,13 +162,6 @@ static inline int __cpus_andnot(cpumask_t *dstp, const cpumask_t *src1p, return bitmap_andnot(dstp->bits, src1p->bits, src2p->bits, nbits); } -#define cpus_complement(dst, src) __cpus_complement(&(dst), &(src), NR_CPUS) -static inline void __cpus_complement(cpumask_t *dstp, - const cpumask_t *srcp, int nbits) -{ - bitmap_complement(dstp->bits, srcp->bits, nbits); -} - #define cpus_equal(src1, src2) __cpus_equal(&(src1), &(src2), NR_CPUS) static inline int __cpus_equal(const cpumask_t *src1p, const cpumask_t *src2p, int nbits) @@ -241,26 +189,12 @@ static inline int __cpus_empty(const cpumask_t *srcp, int nbits) return bitmap_empty(srcp->bits, nbits); } -#define cpus_full(cpumask) __cpus_full(&(cpumask), NR_CPUS) -static inline int __cpus_full(const cpumask_t *srcp, int nbits) -{ - return bitmap_full(srcp->bits, nbits); -} - #define cpus_weight(cpumask) __cpus_weight(&(cpumask), NR_CPUS) static inline int __cpus_weight(const cpumask_t *srcp, int nbits) { return bitmap_weight(srcp->bits, nbits); } -#define cpus_shift_right(dst, src, n) \ - __cpus_shift_right(&(dst), &(src), (n), NR_CPUS) -static inline void __cpus_shift_right(cpumask_t *dstp, - const cpumask_t *srcp, int n, int nbits) -{ - bitmap_shift_right(dstp->bits, srcp->bits, n, nbits); -} - #define cpus_shift_left(dst, src, n) \ __cpus_shift_left(&(dst), &(src), (n), NR_CPUS) static inline void __cpus_shift_left(cpumask_t *dstp, @@ -346,46 +280,6 @@ static inline const struct cpumask *get_cpu_mask(unsigned int cpu) #define cpus_addr(src) ((src).bits) -#if NR_CPUS > BITS_PER_LONG -#define CPUMASK_ALLOC(m) struct m *m = kmalloc(sizeof(*m), GFP_KERNEL) -#define CPUMASK_FREE(m) kfree(m) -#else -#define CPUMASK_ALLOC(m) struct m _m, *m = &_m -#define CPUMASK_FREE(m) -#endif -#define CPUMASK_PTR(v, m) cpumask_t *v = &(m->v) - -#define cpu_remap(oldbit, old, new) \ - __cpu_remap((oldbit), &(old), &(new), NR_CPUS) -static inline int __cpu_remap(int oldbit, - const cpumask_t *oldp, const cpumask_t *newp, int nbits) -{ - return bitmap_bitremap(oldbit, oldp->bits, newp->bits, nbits); -} - -#define cpus_remap(dst, src, old, new) \ - __cpus_remap(&(dst), &(src), &(old), &(new), NR_CPUS) -static inline void __cpus_remap(cpumask_t *dstp, const cpumask_t *srcp, - const cpumask_t *oldp, const cpumask_t *newp, int nbits) -{ - bitmap_remap(dstp->bits, srcp->bits, oldp->bits, newp->bits, nbits); -} - -#define cpus_onto(dst, orig, relmap) \ - __cpus_onto(&(dst), &(orig), &(relmap), NR_CPUS) -static inline void __cpus_onto(cpumask_t *dstp, const cpumask_t *origp, - const cpumask_t *relmapp, int nbits) -{ - bitmap_onto(dstp->bits, origp->bits, relmapp->bits, nbits); -} - -#define cpus_fold(dst, orig, sz) \ - __cpus_fold(&(dst), &(orig), sz, NR_CPUS) -static inline void __cpus_fold(cpumask_t *dstp, const cpumask_t *origp, - int sz, int nbits) -{ - bitmap_fold(dstp->bits, origp->bits, sz, nbits); -} #endif /* !CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS */ #if NR_CPUS == 1 @@ -419,18 +313,14 @@ int __any_online_cpu(const cpumask_t *mask); #ifndef CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS #if NR_CPUS <= 64 -#define next_cpu_nr(n, src) next_cpu(n, src) -#define cpus_weight_nr(cpumask) cpus_weight(cpumask) #define for_each_cpu_mask_nr(cpu, mask) for_each_cpu_mask(cpu, mask) #else /* NR_CPUS > 64 */ int __next_cpu_nr(int n, const cpumask_t *srcp); -#define next_cpu_nr(n, src) __next_cpu_nr((n), &(src)) -#define cpus_weight_nr(cpumask) __cpus_weight(&(cpumask), nr_cpu_ids) #define for_each_cpu_mask_nr(cpu, mask) \ for ((cpu) = -1; \ - (cpu) = next_cpu_nr((cpu), (mask)), \ + (cpu) = __next_cpu_nr((cpu), &(mask)), \ (cpu) < nr_cpu_ids; ) #endif /* NR_CPUS > 64 */ -- cgit v1.2.3 From 6ba2ef7baac23a5d9bb85e28b882d16b439a2293 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 24 Sep 2009 09:34:53 -0600 Subject: cpumask: Move deprecated functions to end of header. The new ones have pretty kerneldoc. Move the old ones to the end to avoid confusing people. Signed-off-by: Rusty Russell Cc: benh@kernel.crashing.org --- include/linux/cpumask.h | 593 ++++++++++++++++++++---------------------------- 1 file changed, 252 insertions(+), 341 deletions(-) (limited to 'include/linux') diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h index e162d13c65ab..789cf5f920ce 100644 --- a/include/linux/cpumask.h +++ b/include/linux/cpumask.h @@ -3,328 +3,37 @@ /* * Cpumasks provide a bitmap suitable for representing the - * set of CPU's in a system, one bit position per CPU number. - * - * The new cpumask_ ops take a "struct cpumask *"; the old ones - * use cpumask_t. - * - * See detailed comments in the file linux/bitmap.h describing the - * data type on which these cpumasks are based. - * - * For details of cpumask_scnprintf() and cpumask_parse_user(), - * see bitmap_scnprintf() and bitmap_parse_user() in lib/bitmap.c. - * For details of cpulist_scnprintf() and cpulist_parse(), see - * bitmap_scnlistprintf() and bitmap_parselist(), also in bitmap.c. - * - * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - * Note: The alternate operations with the suffix "_nr" are used - * to limit the range of the loop to nr_cpu_ids instead of - * NR_CPUS when NR_CPUS > 64 for performance reasons. - * If NR_CPUS is <= 64 then most assembler bitmask - * operators execute faster with a constant range, so - * the operator will continue to use NR_CPUS. - * - * Another consideration is that nr_cpu_ids is initialized - * to NR_CPUS and isn't lowered until the possible cpus are - * discovered (including any disabled cpus). So early uses - * will span the entire range of NR_CPUS. - * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - * - * The obsolescent cpumask operations are: - * - * void cpu_set(cpu, mask) turn on bit 'cpu' in mask - * void cpu_clear(cpu, mask) turn off bit 'cpu' in mask - * void cpus_setall(mask) set all bits - * void cpus_clear(mask) clear all bits - * int cpu_isset(cpu, mask) true iff bit 'cpu' set in mask - * int cpu_test_and_set(cpu, mask) test and set bit 'cpu' in mask - * - * int cpus_and(dst, src1, src2) dst = src1 & src2 [intersection] - * void cpus_or(dst, src1, src2) dst = src1 | src2 [union] - * void cpus_xor(dst, src1, src2) dst = src1 ^ src2 - * int cpus_andnot(dst, src1, src2) dst = src1 & ~src2 - * - * int cpus_equal(mask1, mask2) Does mask1 == mask2? - * int cpus_intersects(mask1, mask2) Do mask1 and mask2 intersect? - * int cpus_subset(mask1, mask2) Is mask1 a subset of mask2? - * int cpus_empty(mask) Is mask empty (no bits sets)? - * int cpus_weight(mask) Hamming weigh - number of set bits - * - * void cpus_shift_left(dst, src, n) Shift left - * - * int first_cpu(mask) Number lowest set bit, or NR_CPUS - * int next_cpu(cpu, mask) Next cpu past 'cpu', or NR_CPUS - * - * cpumask_t cpumask_of_cpu(cpu) Return cpumask with bit 'cpu' set - * (can be used as an lvalue) - * CPU_MASK_ALL Initializer - all bits set - * CPU_MASK_NONE Initializer - no bits set - * unsigned long *cpus_addr(mask) Array of unsigned long's in mask - * - * int cpumask_scnprintf(buf, len, mask) Format cpumask for printing - * int cpumask_parse_user(ubuf, ulen, mask) Parse ascii string as cpumask - * int cpulist_scnprintf(buf, len, mask) Format cpumask as list for printing - * int cpulist_parse(buf, map) Parse ascii string as cpulist - * - * for_each_cpu_mask(cpu, mask) for-loop cpu over mask using NR_CPUS - * for_each_cpu_mask_nr(cpu, mask) for-loop cpu over mask using nr_cpu_ids - * - * int num_online_cpus() Number of online CPUs - * int num_possible_cpus() Number of all possible CPUs - * int num_present_cpus() Number of present CPUs - * - * int cpu_online(cpu) Is some cpu online? - * int cpu_possible(cpu) Is some cpu possible? - * int cpu_present(cpu) Is some cpu present (can schedule)? - * - * int any_online_cpu(mask) First online cpu in mask - * - * for_each_possible_cpu(cpu) for-loop cpu over cpu_possible_map - * for_each_online_cpu(cpu) for-loop cpu over cpu_online_map - * for_each_present_cpu(cpu) for-loop cpu over cpu_present_map - * - * Subtlety: - * 1) The 'type-checked' form of cpu_isset() causes gcc (3.3.2, anyway) - * to generate slightly worse code. Note for example the additional - * 40 lines of assembly code compiling the "for each possible cpu" - * loops buried in the disk_stat_read() macros calls when compiling - * drivers/block/genhd.c (arch i386, CONFIG_SMP=y). So use a simple - * one-line #define for cpu_isset(), instead of wrapping an inline - * inside a macro, the way we do the other calls. + * set of CPU's in a system, one bit position per CPU number. In general, + * only nr_cpu_ids (<= NR_CPUS) bits are valid. */ - #include #include #include typedef struct cpumask { DECLARE_BITMAP(bits, NR_CPUS); } cpumask_t; -#ifndef CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS -#define cpu_set(cpu, dst) __cpu_set((cpu), &(dst)) -static inline void __cpu_set(int cpu, volatile cpumask_t *dstp) -{ - set_bit(cpu, dstp->bits); -} - -#define cpu_clear(cpu, dst) __cpu_clear((cpu), &(dst)) -static inline void __cpu_clear(int cpu, volatile cpumask_t *dstp) -{ - clear_bit(cpu, dstp->bits); -} - -#define cpus_setall(dst) __cpus_setall(&(dst), NR_CPUS) -static inline void __cpus_setall(cpumask_t *dstp, int nbits) -{ - bitmap_fill(dstp->bits, nbits); -} - -#define cpus_clear(dst) __cpus_clear(&(dst), NR_CPUS) -static inline void __cpus_clear(cpumask_t *dstp, int nbits) -{ - bitmap_zero(dstp->bits, nbits); -} - -/* No static inline type checking - see Subtlety (1) above. */ -#define cpu_isset(cpu, cpumask) test_bit((cpu), (cpumask).bits) - -#define cpu_test_and_set(cpu, cpumask) __cpu_test_and_set((cpu), &(cpumask)) -static inline int __cpu_test_and_set(int cpu, cpumask_t *addr) -{ - return test_and_set_bit(cpu, addr->bits); -} - -#define cpus_and(dst, src1, src2) __cpus_and(&(dst), &(src1), &(src2), NR_CPUS) -static inline int __cpus_and(cpumask_t *dstp, const cpumask_t *src1p, - const cpumask_t *src2p, int nbits) -{ - return bitmap_and(dstp->bits, src1p->bits, src2p->bits, nbits); -} - -#define cpus_or(dst, src1, src2) __cpus_or(&(dst), &(src1), &(src2), NR_CPUS) -static inline void __cpus_or(cpumask_t *dstp, const cpumask_t *src1p, - const cpumask_t *src2p, int nbits) -{ - bitmap_or(dstp->bits, src1p->bits, src2p->bits, nbits); -} - -#define cpus_xor(dst, src1, src2) __cpus_xor(&(dst), &(src1), &(src2), NR_CPUS) -static inline void __cpus_xor(cpumask_t *dstp, const cpumask_t *src1p, - const cpumask_t *src2p, int nbits) -{ - bitmap_xor(dstp->bits, src1p->bits, src2p->bits, nbits); -} - -#define cpus_andnot(dst, src1, src2) \ - __cpus_andnot(&(dst), &(src1), &(src2), NR_CPUS) -static inline int __cpus_andnot(cpumask_t *dstp, const cpumask_t *src1p, - const cpumask_t *src2p, int nbits) -{ - return bitmap_andnot(dstp->bits, src1p->bits, src2p->bits, nbits); -} - -#define cpus_equal(src1, src2) __cpus_equal(&(src1), &(src2), NR_CPUS) -static inline int __cpus_equal(const cpumask_t *src1p, - const cpumask_t *src2p, int nbits) -{ - return bitmap_equal(src1p->bits, src2p->bits, nbits); -} - -#define cpus_intersects(src1, src2) __cpus_intersects(&(src1), &(src2), NR_CPUS) -static inline int __cpus_intersects(const cpumask_t *src1p, - const cpumask_t *src2p, int nbits) -{ - return bitmap_intersects(src1p->bits, src2p->bits, nbits); -} - -#define cpus_subset(src1, src2) __cpus_subset(&(src1), &(src2), NR_CPUS) -static inline int __cpus_subset(const cpumask_t *src1p, - const cpumask_t *src2p, int nbits) -{ - return bitmap_subset(src1p->bits, src2p->bits, nbits); -} - -#define cpus_empty(src) __cpus_empty(&(src), NR_CPUS) -static inline int __cpus_empty(const cpumask_t *srcp, int nbits) -{ - return bitmap_empty(srcp->bits, nbits); -} - -#define cpus_weight(cpumask) __cpus_weight(&(cpumask), NR_CPUS) -static inline int __cpus_weight(const cpumask_t *srcp, int nbits) -{ - return bitmap_weight(srcp->bits, nbits); -} - -#define cpus_shift_left(dst, src, n) \ - __cpus_shift_left(&(dst), &(src), (n), NR_CPUS) -static inline void __cpus_shift_left(cpumask_t *dstp, - const cpumask_t *srcp, int n, int nbits) -{ - bitmap_shift_left(dstp->bits, srcp->bits, n, nbits); -} -#endif /* !CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS */ - /** - * to_cpumask - convert an NR_CPUS bitmap to a struct cpumask * - * @bitmap: the bitmap + * cpumask_bits - get the bits in a cpumask + * @maskp: the struct cpumask * * - * There are a few places where cpumask_var_t isn't appropriate and - * static cpumasks must be used (eg. very early boot), yet we don't - * expose the definition of 'struct cpumask'. - * - * This does the conversion, and can be used as a constant initializer. + * You should only assume nr_cpu_ids bits of this mask are valid. This is + * a macro so it's const-correct. */ -#define to_cpumask(bitmap) \ - ((struct cpumask *)(1 ? (bitmap) \ - : (void *)sizeof(__check_is_bitmap(bitmap)))) - -static inline int __check_is_bitmap(const unsigned long *bitmap) -{ - return 1; -} - -/* - * Special-case data structure for "single bit set only" constant CPU masks. - * - * We pre-generate all the 64 (or 32) possible bit positions, with enough - * padding to the left and the right, and return the constant pointer - * appropriately offset. - */ -extern const unsigned long - cpu_bit_bitmap[BITS_PER_LONG+1][BITS_TO_LONGS(NR_CPUS)]; - -static inline const struct cpumask *get_cpu_mask(unsigned int cpu) -{ - const unsigned long *p = cpu_bit_bitmap[1 + cpu % BITS_PER_LONG]; - p -= cpu / BITS_PER_LONG; - return to_cpumask(p); -} - -#ifndef CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS -/* - * In cases where we take the address of the cpumask immediately, - * gcc optimizes it out (it's a constant) and there's no huge stack - * variable created: - */ -#define cpumask_of_cpu(cpu) (*get_cpu_mask(cpu)) - - -#define CPU_MASK_LAST_WORD BITMAP_LAST_WORD_MASK(NR_CPUS) - -#if NR_CPUS <= BITS_PER_LONG - -#define CPU_MASK_ALL \ -(cpumask_t) { { \ - [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \ -} } - -#else - -#define CPU_MASK_ALL \ -(cpumask_t) { { \ - [0 ... BITS_TO_LONGS(NR_CPUS)-2] = ~0UL, \ - [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \ -} } - -#endif - -#define CPU_MASK_NONE \ -(cpumask_t) { { \ - [0 ... BITS_TO_LONGS(NR_CPUS)-1] = 0UL \ -} } - -#define CPU_MASK_CPU0 \ -(cpumask_t) { { \ - [0] = 1UL \ -} } - -#define cpus_addr(src) ((src).bits) - -#endif /* !CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS */ +#define cpumask_bits(maskp) ((maskp)->bits) #if NR_CPUS == 1 - #define nr_cpu_ids 1 -#ifndef CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS -#define first_cpu(src) ({ (void)(src); 0; }) -#define next_cpu(n, src) ({ (void)(src); 1; }) -#define any_online_cpu(mask) 0 -#define for_each_cpu_mask(cpu, mask) \ - for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask) -#endif /* !CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS */ -#else /* NR_CPUS > 1 */ - +#else extern int nr_cpu_ids; -#ifndef CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS -int __first_cpu(const cpumask_t *srcp); -int __next_cpu(int n, const cpumask_t *srcp); -int __any_online_cpu(const cpumask_t *mask); - -#define first_cpu(src) __first_cpu(&(src)) -#define next_cpu(n, src) __next_cpu((n), &(src)) -#define any_online_cpu(mask) __any_online_cpu(&(mask)) -#define for_each_cpu_mask(cpu, mask) \ - for ((cpu) = -1; \ - (cpu) = next_cpu((cpu), (mask)), \ - (cpu) < NR_CPUS; ) -#endif /* !CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS */ #endif -#ifndef CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS -#if NR_CPUS <= 64 - -#define for_each_cpu_mask_nr(cpu, mask) for_each_cpu_mask(cpu, mask) - -#else /* NR_CPUS > 64 */ - -int __next_cpu_nr(int n, const cpumask_t *srcp); -#define for_each_cpu_mask_nr(cpu, mask) \ - for ((cpu) = -1; \ - (cpu) = __next_cpu_nr((cpu), &(mask)), \ - (cpu) < nr_cpu_ids; ) - -#endif /* NR_CPUS > 64 */ -#endif /* !CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS */ +#ifdef CONFIG_CPUMASK_OFFSTACK +/* Assuming NR_CPUS is huge, a runtime limit is more efficient. Also, + * not all bits may be allocated. */ +#define nr_cpumask_bits nr_cpu_ids +#else +#define nr_cpumask_bits NR_CPUS +#endif /* * The following particular system cpumasks and operations manage @@ -371,12 +80,6 @@ extern const struct cpumask *const cpu_online_mask; extern const struct cpumask *const cpu_present_mask; extern const struct cpumask *const cpu_active_mask; -/* These strip const, as traditionally they weren't const. */ -#define cpu_possible_map (*(cpumask_t *)cpu_possible_mask) -#define cpu_online_map (*(cpumask_t *)cpu_online_mask) -#define cpu_present_map (*(cpumask_t *)cpu_present_mask) -#define cpu_active_map (*(cpumask_t *)cpu_active_mask) - #if NR_CPUS > 1 #define num_online_cpus() cpumask_weight(cpu_online_mask) #define num_possible_cpus() cpumask_weight(cpu_possible_mask) @@ -395,35 +98,6 @@ extern const struct cpumask *const cpu_active_mask; #define cpu_active(cpu) ((cpu) == 0) #endif -#define cpu_is_offline(cpu) unlikely(!cpu_online(cpu)) - -/* These are the new versions of the cpumask operators: passed by pointer. - * The older versions will be implemented in terms of these, then deleted. */ -#define cpumask_bits(maskp) ((maskp)->bits) - -#if NR_CPUS <= BITS_PER_LONG -#define CPU_BITS_ALL \ -{ \ - [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \ -} - -#else /* NR_CPUS > BITS_PER_LONG */ - -#define CPU_BITS_ALL \ -{ \ - [0 ... BITS_TO_LONGS(NR_CPUS)-2] = ~0UL, \ - [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \ -} -#endif /* NR_CPUS > BITS_PER_LONG */ - -#ifdef CONFIG_CPUMASK_OFFSTACK -/* Assuming NR_CPUS is huge, a runtime limit is more efficient. Also, - * not all bits may be allocated. */ -#define nr_cpumask_bits nr_cpu_ids -#else -#define nr_cpumask_bits NR_CPUS -#endif - /* verify cpu argument to cpumask_* operators */ static inline unsigned int cpumask_check(unsigned int cpu) { @@ -984,4 +658,241 @@ void set_cpu_active(unsigned int cpu, bool active); void init_cpu_present(const struct cpumask *src); void init_cpu_possible(const struct cpumask *src); void init_cpu_online(const struct cpumask *src); + +/** + * to_cpumask - convert an NR_CPUS bitmap to a struct cpumask * + * @bitmap: the bitmap + * + * There are a few places where cpumask_var_t isn't appropriate and + * static cpumasks must be used (eg. very early boot), yet we don't + * expose the definition of 'struct cpumask'. + * + * This does the conversion, and can be used as a constant initializer. + */ +#define to_cpumask(bitmap) \ + ((struct cpumask *)(1 ? (bitmap) \ + : (void *)sizeof(__check_is_bitmap(bitmap)))) + +static inline int __check_is_bitmap(const unsigned long *bitmap) +{ + return 1; +} + +/* + * Special-case data structure for "single bit set only" constant CPU masks. + * + * We pre-generate all the 64 (or 32) possible bit positions, with enough + * padding to the left and the right, and return the constant pointer + * appropriately offset. + */ +extern const unsigned long + cpu_bit_bitmap[BITS_PER_LONG+1][BITS_TO_LONGS(NR_CPUS)]; + +static inline const struct cpumask *get_cpu_mask(unsigned int cpu) +{ + const unsigned long *p = cpu_bit_bitmap[1 + cpu % BITS_PER_LONG]; + p -= cpu / BITS_PER_LONG; + return to_cpumask(p); +} + +#define cpu_is_offline(cpu) unlikely(!cpu_online(cpu)) + +#if NR_CPUS <= BITS_PER_LONG +#define CPU_BITS_ALL \ +{ \ + [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \ +} + +#else /* NR_CPUS > BITS_PER_LONG */ + +#define CPU_BITS_ALL \ +{ \ + [0 ... BITS_TO_LONGS(NR_CPUS)-2] = ~0UL, \ + [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \ +} +#endif /* NR_CPUS > BITS_PER_LONG */ + +/* + * + * From here down, all obsolete. Use cpumask_ variants! + * + */ +#ifndef CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS +/* These strip const, as traditionally they weren't const. */ +#define cpu_possible_map (*(cpumask_t *)cpu_possible_mask) +#define cpu_online_map (*(cpumask_t *)cpu_online_mask) +#define cpu_present_map (*(cpumask_t *)cpu_present_mask) +#define cpu_active_map (*(cpumask_t *)cpu_active_mask) + +#define cpumask_of_cpu(cpu) (*get_cpu_mask(cpu)) + +#define CPU_MASK_LAST_WORD BITMAP_LAST_WORD_MASK(NR_CPUS) + +#if NR_CPUS <= BITS_PER_LONG + +#define CPU_MASK_ALL \ +(cpumask_t) { { \ + [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \ +} } + +#else + +#define CPU_MASK_ALL \ +(cpumask_t) { { \ + [0 ... BITS_TO_LONGS(NR_CPUS)-2] = ~0UL, \ + [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \ +} } + +#endif + +#define CPU_MASK_NONE \ +(cpumask_t) { { \ + [0 ... BITS_TO_LONGS(NR_CPUS)-1] = 0UL \ +} } + +#define CPU_MASK_CPU0 \ +(cpumask_t) { { \ + [0] = 1UL \ +} } + +#if NR_CPUS == 1 +#define first_cpu(src) ({ (void)(src); 0; }) +#define next_cpu(n, src) ({ (void)(src); 1; }) +#define any_online_cpu(mask) 0 +#define for_each_cpu_mask(cpu, mask) \ + for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask) +#else /* NR_CPUS > 1 */ +int __first_cpu(const cpumask_t *srcp); +int __next_cpu(int n, const cpumask_t *srcp); +int __any_online_cpu(const cpumask_t *mask); + +#define first_cpu(src) __first_cpu(&(src)) +#define next_cpu(n, src) __next_cpu((n), &(src)) +#define any_online_cpu(mask) __any_online_cpu(&(mask)) +#define for_each_cpu_mask(cpu, mask) \ + for ((cpu) = -1; \ + (cpu) = next_cpu((cpu), (mask)), \ + (cpu) < NR_CPUS; ) +#endif /* SMP */ + +#if NR_CPUS <= 64 + +#define for_each_cpu_mask_nr(cpu, mask) for_each_cpu_mask(cpu, mask) + +#else /* NR_CPUS > 64 */ + +int __next_cpu_nr(int n, const cpumask_t *srcp); +#define for_each_cpu_mask_nr(cpu, mask) \ + for ((cpu) = -1; \ + (cpu) = __next_cpu_nr((cpu), &(mask)), \ + (cpu) < nr_cpu_ids; ) + +#endif /* NR_CPUS > 64 */ + +#define cpus_addr(src) ((src).bits) + +#define cpu_set(cpu, dst) __cpu_set((cpu), &(dst)) +static inline void __cpu_set(int cpu, volatile cpumask_t *dstp) +{ + set_bit(cpu, dstp->bits); +} + +#define cpu_clear(cpu, dst) __cpu_clear((cpu), &(dst)) +static inline void __cpu_clear(int cpu, volatile cpumask_t *dstp) +{ + clear_bit(cpu, dstp->bits); +} + +#define cpus_setall(dst) __cpus_setall(&(dst), NR_CPUS) +static inline void __cpus_setall(cpumask_t *dstp, int nbits) +{ + bitmap_fill(dstp->bits, nbits); +} + +#define cpus_clear(dst) __cpus_clear(&(dst), NR_CPUS) +static inline void __cpus_clear(cpumask_t *dstp, int nbits) +{ + bitmap_zero(dstp->bits, nbits); +} + +/* No static inline type checking - see Subtlety (1) above. */ +#define cpu_isset(cpu, cpumask) test_bit((cpu), (cpumask).bits) + +#define cpu_test_and_set(cpu, cpumask) __cpu_test_and_set((cpu), &(cpumask)) +static inline int __cpu_test_and_set(int cpu, cpumask_t *addr) +{ + return test_and_set_bit(cpu, addr->bits); +} + +#define cpus_and(dst, src1, src2) __cpus_and(&(dst), &(src1), &(src2), NR_CPUS) +static inline int __cpus_and(cpumask_t *dstp, const cpumask_t *src1p, + const cpumask_t *src2p, int nbits) +{ + return bitmap_and(dstp->bits, src1p->bits, src2p->bits, nbits); +} + +#define cpus_or(dst, src1, src2) __cpus_or(&(dst), &(src1), &(src2), NR_CPUS) +static inline void __cpus_or(cpumask_t *dstp, const cpumask_t *src1p, + const cpumask_t *src2p, int nbits) +{ + bitmap_or(dstp->bits, src1p->bits, src2p->bits, nbits); +} + +#define cpus_xor(dst, src1, src2) __cpus_xor(&(dst), &(src1), &(src2), NR_CPUS) +static inline void __cpus_xor(cpumask_t *dstp, const cpumask_t *src1p, + const cpumask_t *src2p, int nbits) +{ + bitmap_xor(dstp->bits, src1p->bits, src2p->bits, nbits); +} + +#define cpus_andnot(dst, src1, src2) \ + __cpus_andnot(&(dst), &(src1), &(src2), NR_CPUS) +static inline int __cpus_andnot(cpumask_t *dstp, const cpumask_t *src1p, + const cpumask_t *src2p, int nbits) +{ + return bitmap_andnot(dstp->bits, src1p->bits, src2p->bits, nbits); +} + +#define cpus_equal(src1, src2) __cpus_equal(&(src1), &(src2), NR_CPUS) +static inline int __cpus_equal(const cpumask_t *src1p, + const cpumask_t *src2p, int nbits) +{ + return bitmap_equal(src1p->bits, src2p->bits, nbits); +} + +#define cpus_intersects(src1, src2) __cpus_intersects(&(src1), &(src2), NR_CPUS) +static inline int __cpus_intersects(const cpumask_t *src1p, + const cpumask_t *src2p, int nbits) +{ + return bitmap_intersects(src1p->bits, src2p->bits, nbits); +} + +#define cpus_subset(src1, src2) __cpus_subset(&(src1), &(src2), NR_CPUS) +static inline int __cpus_subset(const cpumask_t *src1p, + const cpumask_t *src2p, int nbits) +{ + return bitmap_subset(src1p->bits, src2p->bits, nbits); +} + +#define cpus_empty(src) __cpus_empty(&(src), NR_CPUS) +static inline int __cpus_empty(const cpumask_t *srcp, int nbits) +{ + return bitmap_empty(srcp->bits, nbits); +} + +#define cpus_weight(cpumask) __cpus_weight(&(cpumask), NR_CPUS) +static inline int __cpus_weight(const cpumask_t *srcp, int nbits) +{ + return bitmap_weight(srcp->bits, nbits); +} + +#define cpus_shift_left(dst, src, n) \ + __cpus_shift_left(&(dst), &(src), (n), NR_CPUS) +static inline void __cpus_shift_left(cpumask_t *dstp, + const cpumask_t *srcp, int n, int nbits) +{ + bitmap_shift_left(dstp->bits, srcp->bits, n, nbits); +} +#endif /* !CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS */ + #endif /* __LINUX_CPUMASK_H */ -- cgit v1.2.3 From 2bcd57ab61e7cabed626226a3771617981c11ce1 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 24 Sep 2009 04:22:25 +0400 Subject: headers: utsname.h redux * remove asm/atomic.h inclusion from linux/utsname.h -- not needed after kref conversion * remove linux/utsname.h inclusion from files which do not need it NOTE: it looks like fs/binfmt_elf.c do not need utsname.h, however due to some personality stuff it _is_ needed -- cowardly leave ELF-related headers and files alone. Signed-off-by: Alexey Dobriyan Signed-off-by: Linus Torvalds --- include/linux/utsname.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/utsname.h b/include/linux/utsname.h index 3656b300de3a..69f39974c041 100644 --- a/include/linux/utsname.h +++ b/include/linux/utsname.h @@ -36,7 +36,6 @@ struct new_utsname { #include #include #include -#include struct uts_namespace { struct kref kref; -- cgit v1.2.3 From 22fe404218156328a27e66349b1175cd0baa4990 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Fri, 18 Sep 2009 13:05:44 -0700 Subject: vfs: split generic_forget_inode() so that hugetlbfs does not have to copy it Hugetlbfs needs to do special things instead of truncate_inode_pages(). Currently, it copied generic_forget_inode() except for truncate_inode_pages() call which is asking for trouble (the code there isn't trivial). So create a separate function generic_detach_inode() which does all the list magic done in generic_forget_inode() and call it from hugetlbfs_forget_inode(). Signed-off-by: Jan Kara Cc: Al Viro Cc: Christoph Hellwig Signed-off-by: Andrew Morton Signed-off-by: Al Viro --- include/linux/fs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 51803528b095..955e34615cb7 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2156,6 +2156,7 @@ extern ino_t iunique(struct super_block *, ino_t); extern int inode_needs_sync(struct inode *inode); extern void generic_delete_inode(struct inode *inode); extern void generic_drop_inode(struct inode *inode); +extern int generic_detach_inode(struct inode *inode); extern struct inode *ilookup5_nowait(struct super_block *sb, unsigned long hashval, int (*test)(struct inode *, void *), -- cgit v1.2.3 From 42cb56ae2ab67390da34906b27bedc3f2ff1393b Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 18 Sep 2009 13:05:53 -0700 Subject: vfs: change sb->s_maxbytes to a loff_t sb->s_maxbytes is supposed to indicate the maximum size of a file that can exist on the filesystem. It's declared as an unsigned long long. Even if a filesystem has no inherent limit that prevents it from using every bit in that unsigned long long, it's still problematic to set it to anything larger than MAX_LFS_FILESIZE. There are places in the kernel that cast s_maxbytes to a signed value. If it's set too large then this cast makes it a negative number and generally breaks the comparison. Change s_maxbytes to be loff_t instead. That should help eliminate the temptation to set it too large by making it a signed value. Also, add a warning for couple of releases to help catch filesystems that set s_maxbytes too large. Eventually we can either convert this to a BUG() or just remove it and in the hope that no one will get it wrong now that it's a signed value. Signed-off-by: Jeff Layton Cc: Johannes Weiner Cc: Christoph Hellwig Cc: Al Viro Cc: Robert Love Cc: Mandeep Singh Baines Signed-off-by: Andrew Morton Signed-off-by: Al Viro --- include/linux/fs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 955e34615cb7..cbb7724c11d3 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1315,7 +1315,7 @@ struct super_block { unsigned long s_blocksize; unsigned char s_blocksize_bits; unsigned char s_dirt; - unsigned long long s_maxbytes; /* Max file size */ + loff_t s_maxbytes; /* Max file size */ struct file_system_type *s_type; const struct super_operations *s_op; const struct dquot_operations *dq_op; -- cgit v1.2.3 From f84398068d9c2babe41500504ef247ae07081857 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Mon, 21 Sep 2009 14:48:36 +0200 Subject: vfs: seq_file: add helpers for data filling Add two helpers that allow access to the seq_file's own buffer, but hide the internal details of seq_files. This allows easier implementation of special purpose filling functions. It also cleans up some existing functions which duplicated the seq_file logic. Make these inline functions in seq_file.h, as suggested by Al. Signed-off-by: Miklos Szeredi Acked-by: Hugh Dickins Signed-off-by: Al Viro --- include/linux/seq_file.h | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) (limited to 'include/linux') diff --git a/include/linux/seq_file.h b/include/linux/seq_file.h index 0c6a86b79596..8366d8f12e53 100644 --- a/include/linux/seq_file.h +++ b/include/linux/seq_file.h @@ -35,6 +35,44 @@ struct seq_operations { #define SEQ_SKIP 1 +/** + * seq_get_buf - get buffer to write arbitrary data to + * @m: the seq_file handle + * @bufp: the beginning of the buffer is stored here + * + * Return the number of bytes available in the buffer, or zero if + * there's no space. + */ +static inline size_t seq_get_buf(struct seq_file *m, char **bufp) +{ + BUG_ON(m->count > m->size); + if (m->count < m->size) + *bufp = m->buf + m->count; + else + *bufp = NULL; + + return m->size - m->count; +} + +/** + * seq_commit - commit data to the buffer + * @m: the seq_file handle + * @num: the number of bytes to commit + * + * Commit @num bytes of data written to a buffer previously acquired + * by seq_buf_get. To signal an error condition, or that the data + * didn't fit in the available space, pass a negative @num value. + */ +static inline void seq_commit(struct seq_file *m, int num) +{ + if (num < 0) { + m->count = m->size; + } else { + BUG_ON(m->count + num > m->size); + m->count += num; + } +} + char *mangle_path(char *s, char *p, char *esc); int seq_open(struct file *, const struct seq_operations *); ssize_t seq_read(struct file *, char __user *, size_t, loff_t *); -- cgit v1.2.3 From 4fadd7bb20a1e7c774ed88dc703d8fbcd00ff917 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 3 Aug 2009 23:28:06 +0200 Subject: freeze_bdev: kill bd_mount_sem Now that we have the freeze count there is not much reason for bd_mount_sem anymore. The actual freeze/thaw operations are serialized using the bd_fsfreeze_mutex, and the only other place we take bd_mount_sem is get_sb_bdev which tries to prevent mounting a filesystem while the block device is frozen. Instead of add a check for bd_fsfreeze_count and return -EBUSY if a filesystem is frozen. While that is a change in user visible behaviour a failing mount is much better for this case rather than having the mount process stuck uninterruptible for a long time. Signed-off-by: Christoph Hellwig Signed-off-by: Al Viro --- include/linux/fs.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index cbb7724c11d3..72dfbd423974 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -640,7 +640,6 @@ struct block_device { struct super_block * bd_super; int bd_openers; struct mutex bd_mutex; /* open/close mutex */ - struct semaphore bd_mount_sem; struct list_head bd_inodes; void * bd_holder; int bd_holders; -- cgit v1.2.3 From 4504230a71566785a05d3e6b53fa1ee071b864eb Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 3 Aug 2009 23:28:35 +0200 Subject: freeze_bdev: grab active reference to frozen superblocks Currently we held s_umount while a filesystem is frozen, despite that we might return to userspace and unlock it from a different process. Instead grab an active reference to keep the file system busy and add an explicit check for frozen filesystems in remount and reject the remount instead of blocking on s_umount. Add a new get_active_super helper to super.c for use by freeze_bdev that grabs an active reference to a superblock from a given block device. Signed-off-by: Christoph Hellwig Signed-off-by: Al Viro --- include/linux/fs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 72dfbd423974..502d96ef345d 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2334,6 +2334,7 @@ extern void get_filesystem(struct file_system_type *fs); extern void put_filesystem(struct file_system_type *fs); extern struct file_system_type *get_fs_type(const char *name); extern struct super_block *get_super(struct block_device *); +extern struct super_block *get_active_super(struct block_device *bdev); extern struct super_block *user_get_super(dev_t); extern void drop_super(struct super_block *sb); -- cgit v1.2.3 From 25d9e2d15286281ec834b829a4aaf8969011f1cd Mon Sep 17 00:00:00 2001 From: "npiggin@suse.de" Date: Fri, 21 Aug 2009 02:35:05 +1000 Subject: truncate: new helpers Introduce new truncate helpers truncate_pagecache and inode_newsize_ok. vmtruncate is also consolidated from mm/memory.c and mm/nommu.c and into mm/truncate.c. Reviewed-by: Christoph Hellwig Signed-off-by: Nick Piggin Signed-off-by: Al Viro --- include/linux/fs.h | 3 ++- include/linux/mm.h | 5 +++-- 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 502d96ef345d..2b08b5ce09b6 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2382,7 +2382,8 @@ extern int buffer_migrate_page(struct address_space *, #define buffer_migrate_page NULL #endif -extern int inode_change_ok(struct inode *, struct iattr *); +extern int inode_change_ok(const struct inode *, struct iattr *); +extern int inode_newsize_ok(const struct inode *, loff_t offset); extern int __must_check inode_setattr(struct inode *, struct iattr *); extern void file_update_time(struct file *file); diff --git a/include/linux/mm.h b/include/linux/mm.h index b6eae5e3144b..8347e938fb2f 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -791,8 +791,9 @@ static inline void unmap_shared_mapping_range(struct address_space *mapping, unmap_mapping_range(mapping, holebegin, holelen, 0); } -extern int vmtruncate(struct inode * inode, loff_t offset); -extern int vmtruncate_range(struct inode * inode, loff_t offset, loff_t end); +extern void truncate_pagecache(struct inode *inode, loff_t old, loff_t new); +extern int vmtruncate(struct inode *inode, loff_t offset); +extern int vmtruncate_range(struct inode *inode, loff_t offset, loff_t end); #ifdef CONFIG_MMU extern int handle_mm_fault(struct mm_struct *mm, struct vm_area_struct *vma, -- cgit v1.2.3 From 57f1f0874f426a9bdfc5cd3f886113dd5cd17834 Mon Sep 17 00:00:00 2001 From: Zhaolei Date: Wed, 23 Sep 2009 15:56:10 -0700 Subject: time: add function to convert between calendar time and broken-down time for universal use There are many similar code in kernel for one object: convert time between calendar time and broken-down time. Here is some source I found: fs/ncpfs/dir.c fs/smbfs/proc.c fs/fat/misc.c fs/udf/udftime.c fs/cifs/netmisc.c net/netfilter/xt_time.c drivers/scsi/ips.c drivers/input/misc/hp_sdc_rtc.c drivers/rtc/rtc-lib.c arch/ia64/hp/sim/boot/fw-emu.c arch/m68k/mac/misc.c arch/powerpc/kernel/time.c arch/parisc/include/asm/rtc.h ... We can make a common function for this type of conversion, At least we can get following benefit: 1: Make kernel simple and unify 2: Easy to fix bug in converting code 3: Reduce clone of code in future For example, I'm trying to make ftrace display walltime, this patch will make me easy. This code is based on code from glibc-2.6 Signed-off-by: Zhao Lei Cc: OGAWA Hirofumi Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Pavel Machek Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/time.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'include/linux') diff --git a/include/linux/time.h b/include/linux/time.h index 56787c093345..fe04e5ef6a59 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -155,6 +155,34 @@ extern void timekeeping_leap_insert(int leapsecond); struct tms; extern void do_sys_times(struct tms *); +/* + * Similar to the struct tm in userspace , but it needs to be here so + * that the kernel source is self contained. + */ +struct tm { + /* + * the number of seconds after the minute, normally in the range + * 0 to 59, but can be up to 60 to allow for leap seconds + */ + int tm_sec; + /* the number of minutes after the hour, in the range 0 to 59*/ + int tm_min; + /* the number of hours past midnight, in the range 0 to 23 */ + int tm_hour; + /* the day of the month, in the range 1 to 31 */ + int tm_mday; + /* the number of months since January, in the range 0 to 11 */ + int tm_mon; + /* the number of years since 1900 */ + long tm_year; + /* the number of days since Sunday, in the range 0 to 6 */ + int tm_wday; + /* the number of days since January 1, in the range 0 to 365 */ + int tm_yday; +}; + +void time_to_tm(time_t totalsecs, int offset, struct tm *result); + /** * timespec_to_ns - Convert timespec to nanoseconds * @ts: pointer to the timespec variable to be converted -- cgit v1.2.3 From 55dff4954ebdeba2be59e19398a607d799c5fa9f Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 23 Sep 2009 15:56:17 -0700 Subject: docs: fix various Documentation/ paths in header files Fix various Documentation/ paths in include/linux/. Signed-off-by: Randy Dunlap Reviewed-by: Jesper Juhl Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/configfs.h | 4 ++-- include/linux/debugfs.h | 2 +- include/linux/relay.h | 2 +- include/linux/tracepoint.h | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/configfs.h b/include/linux/configfs.h index 7f627775c947..ddb7a97c78c2 100644 --- a/include/linux/configfs.h +++ b/include/linux/configfs.h @@ -27,8 +27,8 @@ * * configfs Copyright (C) 2005 Oracle. All rights reserved. * - * Please read Documentation/filesystems/configfs.txt before using the - * configfs interface, ESPECIALLY the parts about reference counts and + * Please read Documentation/filesystems/configfs/configfs.txt before using + * the configfs interface, ESPECIALLY the parts about reference counts and * item destructors. */ diff --git a/include/linux/debugfs.h b/include/linux/debugfs.h index eb5c2ba2f81a..fc1b930f246c 100644 --- a/include/linux/debugfs.h +++ b/include/linux/debugfs.h @@ -9,7 +9,7 @@ * 2 as published by the Free Software Foundation. * * debugfs is for people to use instead of /proc or /sys. - * See Documentation/DocBook/kernel-api for more details. + * See Documentation/DocBook/filesystems for more details. */ #ifndef _DEBUGFS_H_ diff --git a/include/linux/relay.h b/include/linux/relay.h index 953fc055e875..14a86bc7102b 100644 --- a/include/linux/relay.h +++ b/include/linux/relay.h @@ -140,7 +140,7 @@ struct rchan_callbacks * cause relay_open() to create a single global buffer rather * than the default set of per-cpu buffers. * - * See Documentation/filesystems/relayfs.txt for more info. + * See Documentation/filesystems/relay.txt for more info. */ struct dentry *(*create_buf_file)(const char *filename, struct dentry *parent, diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h index 63a3f7a80580..660a9de96f81 100644 --- a/include/linux/tracepoint.h +++ b/include/linux/tracepoint.h @@ -4,7 +4,7 @@ /* * Kernel Tracepoint API. * - * See Documentation/tracepoint.txt. + * See Documentation/trace/tracepoints.txt. * * (C) Copyright 2008 Mathieu Desnoyers * -- cgit v1.2.3 From 8f3ff20862cfcb85500a2bb55ee64622bd59fd0c Mon Sep 17 00:00:00 2001 From: Paul Menage Date: Wed, 23 Sep 2009 15:56:25 -0700 Subject: cgroups: revert "cgroups: fix pid namespace bug" The following series adds a "cgroup.procs" file to each cgroup that reports unique tgids rather than pids, and allows all threads in a threadgroup to be atomically moved to a new cgroup. The subsystem "attach" interface is modified to support attaching whole threadgroups at a time, which could introduce potential problems if any subsystem were to need to access the old cgroup of every thread being moved. The attach interface may need to be revised if this becomes the case. Also added is functionality for read/write locking all CLONE_THREAD fork()ing within a threadgroup, by means of an rwsem that lives in the sighand_struct, for per-threadgroup-ness and also for sharing a cacheline with the sighand's atomic count. This scheme should introduce no extra overhead in the fork path when there's no contention. The final patch reveals potential for a race when forking before a subsystem's attach function is called - one potential solution in case any subsystem has this problem is to hang on to the group's fork mutex through the attach() calls, though no subsystem yet demonstrates need for an extended critical section. This patch: Revert commit 096b7fe012d66ed55e98bc8022405ede0cc80e96 Author: Li Zefan AuthorDate: Wed Jul 29 15:04:04 2009 -0700 Commit: Linus Torvalds CommitDate: Wed Jul 29 19:10:35 2009 -0700 cgroups: fix pid namespace bug This is in preparation for some clashing cgroups changes that subsume the original commit's functionaliy. The original commit fixed a pid namespace bug which Ben Blum fixed independently (in the same way, but with different code) as part of a series of patches. I played around with trying to reconcile Ben's patch series with Li's patch, but concluded that it was simpler to just revert Li's, given that Ben's patch series contained essentially the same fix. Signed-off-by: Paul Menage Cc: Li Zefan Cc: Matt Helsley Cc: "Eric W. Biederman" Cc: Oleg Nesterov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/cgroup.h | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index 90bba9e62286..c833d6f23672 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -179,11 +179,14 @@ struct cgroup { */ struct list_head release_list; - /* pids_mutex protects pids_list and cached pid arrays. */ + /* pids_mutex protects the fields below */ struct rw_semaphore pids_mutex; - - /* Linked list of struct cgroup_pids */ - struct list_head pids_list; + /* Array of process ids in the cgroup */ + pid_t *tasks_pids; + /* How many files are using the current tasks_pids array */ + int pids_use_count; + /* Length of the current tasks_pids array */ + int pids_length; /* For RCU-protected deletion */ struct rcu_head rcu_head; -- cgit v1.2.3 From 102a775e3647628727ae83a9a6abf0564c3ca7cb Mon Sep 17 00:00:00 2001 From: Ben Blum Date: Wed, 23 Sep 2009 15:56:26 -0700 Subject: cgroups: add a read-only "procs" file similar to "tasks" that shows only unique tgids struct cgroup used to have a bunch of fields for keeping track of the pidlist for the tasks file. Those are now separated into a new struct cgroup_pidlist, of which two are had, one for procs and one for tasks. The way the seq_file operations are set up is changed so that just the pidlist struct gets passed around as the private data. Interface example: Suppose a multithreaded process has pid 1000 and other threads with ids 1001, 1002, 1003: $ cat tasks 1000 1001 1002 1003 $ cat cgroup.procs 1000 $ Signed-off-by: Ben Blum Signed-off-by: Paul Menage Acked-by: Li Zefan Cc: Matt Helsley Cc: "Eric W. Biederman" Cc: Oleg Nesterov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/cgroup.h | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index c833d6f23672..2357733a0a80 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -141,6 +141,17 @@ enum { CGRP_WAIT_ON_RMDIR, }; +struct cgroup_pidlist { + /* protects the other fields */ + struct rw_semaphore mutex; + /* array of xids */ + pid_t *list; + /* how many elements the above list has */ + int length; + /* how many files are using the current array */ + int use_count; +}; + struct cgroup { unsigned long flags; /* "unsigned long" so bitops work */ @@ -179,14 +190,9 @@ struct cgroup { */ struct list_head release_list; - /* pids_mutex protects the fields below */ - struct rw_semaphore pids_mutex; - /* Array of process ids in the cgroup */ - pid_t *tasks_pids; - /* How many files are using the current tasks_pids array */ - int pids_use_count; - /* Length of the current tasks_pids array */ - int pids_length; + /* we will have two separate pidlists, one for pids (the tasks file) + * and one for tgids (the procs file). */ + struct cgroup_pidlist tasks, procs; /* For RCU-protected deletion */ struct rcu_head rcu_head; -- cgit v1.2.3 From 72a8cb30d10d4041c455a7054607a7d519167c87 Mon Sep 17 00:00:00 2001 From: Ben Blum Date: Wed, 23 Sep 2009 15:56:27 -0700 Subject: cgroups: ensure correct concurrent opening/reading of pidlists across pid namespaces Previously there was the problem in which two processes from different pid namespaces reading the tasks or procs file could result in one process seeing results from the other's namespace. Rather than one pidlist for each file in a cgroup, we now keep a list of pidlists keyed by namespace and file type (tasks versus procs) in which entries are placed on demand. Each pidlist has its own lock, and that the pidlists themselves are passed around in the seq_file's private pointer means we don't have to touch the cgroup or its master list except when creating and destroying entries. Signed-off-by: Ben Blum Signed-off-by: Paul Menage Cc: Li Zefan Cc: Matt Helsley Cc: "Eric W. Biederman" Cc: Oleg Nesterov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/cgroup.h | 34 +++++++++++++++++++++++++++++----- 1 file changed, 29 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index 2357733a0a80..88e863460726 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -141,15 +141,36 @@ enum { CGRP_WAIT_ON_RMDIR, }; +/* which pidlist file are we talking about? */ +enum cgroup_filetype { + CGROUP_FILE_PROCS, + CGROUP_FILE_TASKS, +}; + +/* + * A pidlist is a list of pids that virtually represents the contents of one + * of the cgroup files ("procs" or "tasks"). We keep a list of such pidlists, + * a pair (one each for procs, tasks) for each pid namespace that's relevant + * to the cgroup. + */ struct cgroup_pidlist { - /* protects the other fields */ - struct rw_semaphore mutex; + /* + * used to find which pidlist is wanted. doesn't change as long as + * this particular list stays in the list. + */ + struct { enum cgroup_filetype type; struct pid_namespace *ns; } key; /* array of xids */ pid_t *list; /* how many elements the above list has */ int length; /* how many files are using the current array */ int use_count; + /* each of these stored in a list by its cgroup */ + struct list_head links; + /* pointer to the cgroup we belong to, for list removal purposes */ + struct cgroup *owner; + /* protects the other fields */ + struct rw_semaphore mutex; }; struct cgroup { @@ -190,9 +211,12 @@ struct cgroup { */ struct list_head release_list; - /* we will have two separate pidlists, one for pids (the tasks file) - * and one for tgids (the procs file). */ - struct cgroup_pidlist tasks, procs; + /* + * list of pidlists, up to two for each namespace (one for procs, one + * for tasks); created on demand. + */ + struct list_head pidlists; + struct mutex pidlist_mutex; /* For RCU-protected deletion */ struct rcu_head rcu_head; -- cgit v1.2.3 From c378369d8b4fa516ff2b1e79c3eded4e0e955ebb Mon Sep 17 00:00:00 2001 From: Ben Blum Date: Wed, 23 Sep 2009 15:56:29 -0700 Subject: cgroups: change css_set freeing mechanism to be under RCU Changes css_set freeing mechanism to be under RCU This is a prepatch for making the procs file writable. In order to free the old css_sets for each task to be moved as they're being moved, the freeing mechanism must be RCU-protected, or else we would have to have a call to synchronize_rcu() for each task before freeing its old css_set. Signed-off-by: Ben Blum Signed-off-by: Paul Menage Cc: "Paul E. McKenney" Acked-by: Li Zefan Cc: Matt Helsley Cc: "Eric W. Biederman" Cc: Oleg Nesterov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/cgroup.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index 88e863460726..3ac78a2f4b5a 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -260,6 +260,9 @@ struct css_set { * during subsystem registration (at boot time). */ struct cgroup_subsys_state *subsys[CGROUP_SUBSYS_COUNT]; + + /* For RCU-protected deletion */ + struct rcu_head rcu_head; }; /* -- cgit v1.2.3 From be367d09927023d081f9199665c8500f69f14d22 Mon Sep 17 00:00:00 2001 From: Ben Blum Date: Wed, 23 Sep 2009 15:56:31 -0700 Subject: cgroups: let ss->can_attach and ss->attach do whole threadgroups at a time Alter the ss->can_attach and ss->attach functions to be able to deal with a whole threadgroup at a time, for use in cgroup_attach_proc. (This is a pre-patch to cgroup-procs-writable.patch.) Currently, new mode of the attach function can only tell the subsystem about the old cgroup of the threadgroup leader. No subsystem currently needs that information for each thread that's being moved, but if one were to be added (for example, one that counts tasks within a group) this bit would need to be reworked a bit to tell the subsystem the right information. [hidave.darkstar@gmail.com: fix build] Signed-off-by: Ben Blum Signed-off-by: Paul Menage Acked-by: Li Zefan Reviewed-by: Matt Helsley Cc: "Eric W. Biederman" Cc: Oleg Nesterov Cc: Peter Zijlstra Cc: Ingo Molnar Cc: Dave Young Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/cgroup.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index 3ac78a2f4b5a..b62bb9294d0c 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -425,10 +425,11 @@ struct cgroup_subsys { struct cgroup *cgrp); int (*pre_destroy)(struct cgroup_subsys *ss, struct cgroup *cgrp); void (*destroy)(struct cgroup_subsys *ss, struct cgroup *cgrp); - int (*can_attach)(struct cgroup_subsys *ss, - struct cgroup *cgrp, struct task_struct *tsk); + int (*can_attach)(struct cgroup_subsys *ss, struct cgroup *cgrp, + struct task_struct *tsk, bool threadgroup); void (*attach)(struct cgroup_subsys *ss, struct cgroup *cgrp, - struct cgroup *old_cgrp, struct task_struct *tsk); + struct cgroup *old_cgrp, struct task_struct *tsk, + bool threadgroup); void (*fork)(struct cgroup_subsys *ss, struct task_struct *task); void (*exit)(struct cgroup_subsys *ss, struct task_struct *task); int (*populate)(struct cgroup_subsys *ss, -- cgit v1.2.3 From 4b3bde4c983de36c59e6c1a24701f6fe816f9f55 Mon Sep 17 00:00:00 2001 From: Balbir Singh Date: Wed, 23 Sep 2009 15:56:32 -0700 Subject: memcg: remove the overhead associated with the root cgroup Change the memory cgroup to remove the overhead associated with accounting all pages in the root cgroup. As a side-effect, we can no longer set a memory hard limit in the root cgroup. A new flag to track whether the page has been accounted or not has been added as well. Flags are now set atomically for page_cgroup, pcg_default_flags is now obsolete and removed. [akpm@linux-foundation.org: fix a few documentation glitches] Signed-off-by: Balbir Singh Signed-off-by: Daisuke Nishimura Reviewed-by: KAMEZAWA Hiroyuki Cc: Daisuke Nishimura Cc: Li Zefan Cc: Paul Menage Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/page_cgroup.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'include/linux') diff --git a/include/linux/page_cgroup.h b/include/linux/page_cgroup.h index ada779f24178..4b938d4f3ac2 100644 --- a/include/linux/page_cgroup.h +++ b/include/linux/page_cgroup.h @@ -38,6 +38,7 @@ enum { PCG_LOCK, /* page cgroup is locked */ PCG_CACHE, /* charged as cache */ PCG_USED, /* this object is in use. */ + PCG_ACCT_LRU, /* page has been accounted for */ }; #define TESTPCGFLAG(uname, lname) \ @@ -52,11 +53,23 @@ static inline void SetPageCgroup##uname(struct page_cgroup *pc)\ static inline void ClearPageCgroup##uname(struct page_cgroup *pc) \ { clear_bit(PCG_##lname, &pc->flags); } +#define TESTCLEARPCGFLAG(uname, lname) \ +static inline int TestClearPageCgroup##uname(struct page_cgroup *pc) \ + { return test_and_clear_bit(PCG_##lname, &pc->flags); } + /* Cache flag is set only once (at allocation) */ TESTPCGFLAG(Cache, CACHE) +CLEARPCGFLAG(Cache, CACHE) +SETPCGFLAG(Cache, CACHE) TESTPCGFLAG(Used, USED) CLEARPCGFLAG(Used, USED) +SETPCGFLAG(Used, USED) + +SETPCGFLAG(AcctLRU, ACCT_LRU) +CLEARPCGFLAG(AcctLRU, ACCT_LRU) +TESTPCGFLAG(AcctLRU, ACCT_LRU) +TESTCLEARPCGFLAG(AcctLRU, ACCT_LRU) static inline int page_cgroup_nid(struct page_cgroup *pc) { -- cgit v1.2.3 From 296c81d89f4f14269f7346f81442910158c0a83a Mon Sep 17 00:00:00 2001 From: Balbir Singh Date: Wed, 23 Sep 2009 15:56:36 -0700 Subject: memory controller: soft limit interface Add an interface to allow get/set of soft limits. Soft limits for memory plus swap controller (memsw) is currently not supported. Resource counters have been enhanced to support soft limits and new type RES_SOFT_LIMIT has been added. Unlike hard limits, soft limits can be directly set and do not need any reclaim or checks before setting them to a newer value. Kamezawa-San raised a question as to whether soft limit should belong to res_counter. Since all resources understand the basic concepts of hard and soft limits, it is justified to add soft limits here. Soft limits are a generic resource usage feature, even file system quotas support soft limits. Signed-off-by: Balbir Singh Cc: KAMEZAWA Hiroyuki Cc: Li Zefan Cc: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/res_counter.h | 58 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+) (limited to 'include/linux') diff --git a/include/linux/res_counter.h b/include/linux/res_counter.h index 511f42fc6816..fcb9884df618 100644 --- a/include/linux/res_counter.h +++ b/include/linux/res_counter.h @@ -34,6 +34,10 @@ struct res_counter { * the limit that usage cannot exceed */ unsigned long long limit; + /* + * the limit that usage can be exceed + */ + unsigned long long soft_limit; /* * the number of unsuccessful attempts to consume the resource */ @@ -87,6 +91,7 @@ enum { RES_MAX_USAGE, RES_LIMIT, RES_FAILCNT, + RES_SOFT_LIMIT, }; /* @@ -132,6 +137,36 @@ static inline bool res_counter_limit_check_locked(struct res_counter *cnt) return false; } +static inline bool res_counter_soft_limit_check_locked(struct res_counter *cnt) +{ + if (cnt->usage < cnt->soft_limit) + return true; + + return false; +} + +/** + * Get the difference between the usage and the soft limit + * @cnt: The counter + * + * Returns 0 if usage is less than or equal to soft limit + * The difference between usage and soft limit, otherwise. + */ +static inline unsigned long long +res_counter_soft_limit_excess(struct res_counter *cnt) +{ + unsigned long long excess; + unsigned long flags; + + spin_lock_irqsave(&cnt->lock, flags); + if (cnt->usage <= cnt->soft_limit) + excess = 0; + else + excess = cnt->usage - cnt->soft_limit; + spin_unlock_irqrestore(&cnt->lock, flags); + return excess; +} + /* * Helper function to detect if the cgroup is within it's limit or * not. It's currently called from cgroup_rss_prepare() @@ -147,6 +182,17 @@ static inline bool res_counter_check_under_limit(struct res_counter *cnt) return ret; } +static inline bool res_counter_check_under_soft_limit(struct res_counter *cnt) +{ + bool ret; + unsigned long flags; + + spin_lock_irqsave(&cnt->lock, flags); + ret = res_counter_soft_limit_check_locked(cnt); + spin_unlock_irqrestore(&cnt->lock, flags); + return ret; +} + static inline void res_counter_reset_max(struct res_counter *cnt) { unsigned long flags; @@ -180,4 +226,16 @@ static inline int res_counter_set_limit(struct res_counter *cnt, return ret; } +static inline int +res_counter_set_soft_limit(struct res_counter *cnt, + unsigned long long soft_limit) +{ + unsigned long flags; + + spin_lock_irqsave(&cnt->lock, flags); + cnt->soft_limit = soft_limit; + spin_unlock_irqrestore(&cnt->lock, flags); + return 0; +} + #endif -- cgit v1.2.3 From f64c3f54940d6929a2b6dcffaab942bd62be2e66 Mon Sep 17 00:00:00 2001 From: Balbir Singh Date: Wed, 23 Sep 2009 15:56:37 -0700 Subject: memory controller: soft limit organize cgroups Organize cgroups over soft limit in a RB-Tree Introduce an RB-Tree for storing memory cgroups that are over their soft limit. The overall goal is to 1. Add a memory cgroup to the RB-Tree when the soft limit is exceeded. We are careful about updates, updates take place only after a particular time interval has passed 2. We remove the node from the RB-Tree when the usage goes below the soft limit The next set of patches will exploit the RB-Tree to get the group that is over its soft limit by the largest amount and reclaim from it, when we face memory contention. [hugh.dickins@tiscali.co.uk: CONFIG_CGROUP_MEM_RES_CTLR=y CONFIG_PREEMPT=y fails to boot] Signed-off-by: Balbir Singh Signed-off-by: KAMEZAWA Hiroyuki Cc: Li Zefan Cc: KOSAKI Motohiro Signed-off-by: Hugh Dickins Cc: Jiri Slaby Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/res_counter.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/res_counter.h b/include/linux/res_counter.h index fcb9884df618..731af71cddc9 100644 --- a/include/linux/res_counter.h +++ b/include/linux/res_counter.h @@ -114,7 +114,8 @@ void res_counter_init(struct res_counter *counter, struct res_counter *parent); int __must_check res_counter_charge_locked(struct res_counter *counter, unsigned long val); int __must_check res_counter_charge(struct res_counter *counter, - unsigned long val, struct res_counter **limit_fail_at); + unsigned long val, struct res_counter **limit_fail_at, + struct res_counter **soft_limit_at); /* * uncharge - tell that some portion of the resource is released @@ -127,7 +128,8 @@ int __must_check res_counter_charge(struct res_counter *counter, */ void res_counter_uncharge_locked(struct res_counter *counter, unsigned long val); -void res_counter_uncharge(struct res_counter *counter, unsigned long val); +void res_counter_uncharge(struct res_counter *counter, unsigned long val, + bool *was_soft_limit_excess); static inline bool res_counter_limit_check_locked(struct res_counter *cnt) { -- cgit v1.2.3 From 4e41695356fb4e0b153be1440ad027e46e0a7ea2 Mon Sep 17 00:00:00 2001 From: Balbir Singh Date: Wed, 23 Sep 2009 15:56:39 -0700 Subject: memory controller: soft limit reclaim on contention Implement reclaim from groups over their soft limit Permit reclaim from memory cgroups on contention (via the direct reclaim path). memory cgroup soft limit reclaim finds the group that exceeds its soft limit by the largest number of pages and reclaims pages from it and then reinserts the cgroup into its correct place in the rbtree. Add additional checks to mem_cgroup_hierarchical_reclaim() to detect long loops in case all swap is turned off. The code has been refactored and the loop check (loop < 2) has been enhanced for soft limits. For soft limits, we try to do more targetted reclaim. Instead of bailing out after two loops, the routine now reclaims memory proportional to the size by which the soft limit is exceeded. The proportion has been empirically determined. [akpm@linux-foundation.org: build fix] [kamezawa.hiroyu@jp.fujitsu.com: fix softlimit css refcnt handling] [nishimura@mxp.nes.nec.co.jp: refcount of the "victim" should be decremented before exiting the loop] Signed-off-by: Balbir Singh Cc: KAMEZAWA Hiroyuki Cc: Li Zefan Acked-by: KOSAKI Motohiro Signed-off-by: KAMEZAWA Hiroyuki Signed-off-by: Daisuke Nishimura Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/memcontrol.h | 10 ++++++++++ include/linux/swap.h | 5 +++++ 2 files changed, 15 insertions(+) (limited to 'include/linux') diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index e46a0734ab6e..bf9213b2db8f 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -118,6 +118,9 @@ static inline bool mem_cgroup_disabled(void) extern bool mem_cgroup_oom_called(struct task_struct *task); void mem_cgroup_update_mapped_file_stat(struct page *page, int val); +unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order, + gfp_t gfp_mask, int nid, + int zid); #else /* CONFIG_CGROUP_MEM_RES_CTLR */ struct mem_cgroup; @@ -276,6 +279,13 @@ static inline void mem_cgroup_update_mapped_file_stat(struct page *page, { } +static inline +unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order, + gfp_t gfp_mask, int nid, int zid) +{ + return 0; +} + #endif /* CONFIG_CGROUP_MEM_CONT */ #endif /* _LINUX_MEMCONTROL_H */ diff --git a/include/linux/swap.h b/include/linux/swap.h index 6c990e658f4e..4c78fea989b9 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -217,6 +217,11 @@ extern unsigned long try_to_free_pages(struct zonelist *zonelist, int order, extern unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem, gfp_t gfp_mask, bool noswap, unsigned int swappiness); +extern unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem, + gfp_t gfp_mask, bool noswap, + unsigned int swappiness, + struct zone *zone, + int nid); extern int __isolate_lru_page(struct page *page, int mode, int file); extern unsigned long shrink_all_memory(unsigned long nr_pages); extern int vm_swappiness; -- cgit v1.2.3 From a7f0765edfd53aed09cb7b0e15863688b39447de Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Wed, 23 Sep 2009 15:56:44 -0700 Subject: ptrace: __ptrace_detach: do __wake_up_parent() if we reap the tracee The bug is old, it wasn't cause by recent changes. Test case: static void *tfunc(void *arg) { int pid = (long)arg; assert(ptrace(PTRACE_ATTACH, pid, NULL, NULL) == 0); kill(pid, SIGKILL); sleep(1); return NULL; } int main(void) { pthread_t th; long pid = fork(); if (!pid) pause(); signal(SIGCHLD, SIG_IGN); assert(pthread_create(&th, NULL, tfunc, (void*)pid) == 0); int r = waitpid(-1, NULL, __WNOTHREAD); printf("waitpid: %d %m\n", r); return 0; } Before the patch this program hangs, after this patch waitpid() correctly fails with errno == -ECHILD. The problem is, __ptrace_detach() reaps the EXIT_ZOMBIE tracee if its ->real_parent is our sub-thread and we ignore SIGCHLD. But in this case we should wake up other threads which can sleep in do_wait(). Signed-off-by: Oleg Nesterov Cc: Roland McGrath Cc: Vitaly Mayatskikh Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/sched.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 848d1f20086e..9e5a88afe6be 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2059,6 +2059,7 @@ extern int kill_pgrp(struct pid *pid, int sig, int priv); extern int kill_pid(struct pid *pid, int sig, int priv); extern int kill_proc_info(int, struct siginfo *, pid_t); extern int do_notify_parent(struct task_struct *, int); +extern void __wake_up_parent(struct task_struct *p, struct task_struct *parent); extern void force_sig(int, struct task_struct *); extern void force_sig_specific(int, struct task_struct *); extern int send_sig(int, struct task_struct *, int); -- cgit v1.2.3 From ae6d2ed7bb3877ff35b9569402025f40ea2e1803 Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Wed, 23 Sep 2009 15:56:53 -0700 Subject: signals: tracehook_notify_jctl change This changes tracehook_notify_jctl() so it's called with the siglock held, and changes its argument and return value definition. These clean-ups make it a better fit for what new tracing hooks need to check. Tracing needs the siglock here, held from the time TASK_STOPPED was set, to avoid potential SIGCONT races if it wants to allow any blocking in its tracing hooks. This also folds the finish_stop() function into its caller do_signal_stop(). The function is short, called only once and only unconditionally. It aids readability to fold it in. [oleg@redhat.com: do not call tracehook_notify_jctl() in TASK_STOPPED state] [oleg@redhat.com: introduce tracehook_finish_jctl() helper] Signed-off-by: Roland McGrath Signed-off-by: Oleg Nesterov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/tracehook.h | 34 +++++++++++++++++++++++++--------- 1 file changed, 25 insertions(+), 9 deletions(-) (limited to 'include/linux') diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h index 17ba82efa483..1eb44a924e56 100644 --- a/include/linux/tracehook.h +++ b/include/linux/tracehook.h @@ -1,7 +1,7 @@ /* * Tracing hooks * - * Copyright (C) 2008 Red Hat, Inc. All rights reserved. + * Copyright (C) 2008-2009 Red Hat, Inc. All rights reserved. * * This copyrighted material is made available to anyone wishing to use, * modify, copy, or redistribute it subject to the terms and conditions @@ -463,22 +463,38 @@ static inline int tracehook_get_signal(struct task_struct *task, /** * tracehook_notify_jctl - report about job control stop/continue - * @notify: nonzero if this is the last thread in the group to stop + * @notify: zero, %CLD_STOPPED or %CLD_CONTINUED * @why: %CLD_STOPPED or %CLD_CONTINUED * * This is called when we might call do_notify_parent_cldstop(). - * It's called when about to stop for job control; we are already in - * %TASK_STOPPED state, about to call schedule(). It's also called when - * a delayed %CLD_STOPPED or %CLD_CONTINUED report is ready to be made. * - * Return nonzero to generate a %SIGCHLD with @why, which is - * normal if @notify is nonzero. + * @notify is zero if we would not ordinarily send a %SIGCHLD, + * or is the %CLD_STOPPED or %CLD_CONTINUED .si_code for %SIGCHLD. * - * Called with no locks held. + * @why is %CLD_STOPPED when about to stop for job control; + * we are already in %TASK_STOPPED state, about to call schedule(). + * It might also be that we have just exited (check %PF_EXITING), + * but need to report that a group-wide stop is complete. + * + * @why is %CLD_CONTINUED when waking up after job control stop and + * ready to make a delayed @notify report. + * + * Return the %CLD_* value for %SIGCHLD, or zero to generate no signal. + * + * Called with the siglock held. */ static inline int tracehook_notify_jctl(int notify, int why) { - return notify || (current->ptrace & PT_PTRACED); + return notify ?: (current->ptrace & PT_PTRACED) ? why : 0; +} + +/** + * tracehook_finish_jctl - report about return from job control stop + * + * This is called by do_signal_stop() after wakeup. + */ +static inline void tracehook_finish_jctl(void) +{ } #define DEATH_REAP -1 -- cgit v1.2.3 From 964ee7df90d799e38fb1556c57cd5c45fc736436 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Wed, 23 Sep 2009 15:56:59 -0700 Subject: exec: fix set_binfmt() vs sys_delete_module() race sys_delete_module() can set MODULE_STATE_GOING after search_binary_handler() does try_module_get(). In this case set_binfmt()->try_module_get() fails but since none of the callers check the returned error, the task will run with the wrong old ->binfmt. The proper fix should change all ->load_binary() methods, but we can rely on fact that the caller must hold a reference to binfmt->module and use __module_get() which never fails. Signed-off-by: Oleg Nesterov Acked-by: Rusty Russell Cc: Hiroshi Shimamoto Cc: Roland McGrath Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/binfmts.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h index 2046b5b8af48..aece486ac734 100644 --- a/include/linux/binfmts.h +++ b/include/linux/binfmts.h @@ -120,7 +120,7 @@ extern int copy_strings_kernel(int argc,char ** argv,struct linux_binprm *bprm); extern int prepare_bprm_creds(struct linux_binprm *bprm); extern void install_exec_creds(struct linux_binprm *bprm); extern void do_coredump(long signr, int exit_code, struct pt_regs *regs); -extern int set_binfmt(struct linux_binfmt *new); +extern void set_binfmt(struct linux_binfmt *new); extern void free_bprm(struct linux_binprm *); #endif /* __KERNEL__ */ -- cgit v1.2.3 From 4a30debfb778240a4b1767d4b0c5a5b25ab97160 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Wed, 23 Sep 2009 15:57:00 -0700 Subject: signals: introduce do_send_sig_info() helper Introduce do_send_sig_info() and convert group_send_sig_info(), send_sig_info(), do_send_specific() to use this helper. Hopefully it will have more users soon, it allows to specify specific/group behaviour via "bool group" argument. Shaves 80 bytes from .text. Signed-off-by: Oleg Nesterov Cc: Peter Zijlstra Cc: stephane eranian Cc: Ingo Molnar Cc: Roland McGrath Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/signal.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/signal.h b/include/linux/signal.h index c7552836bd95..ab9272cc270c 100644 --- a/include/linux/signal.h +++ b/include/linux/signal.h @@ -233,6 +233,8 @@ static inline int valid_signal(unsigned long sig) } extern int next_signal(struct sigpending *pending, sigset_t *mask); +extern int do_send_sig_info(int sig, struct siginfo *info, + struct task_struct *p, bool group); extern int group_send_sig_info(int sig, struct siginfo *info, struct task_struct *p); extern int __group_send_sig_info(int, struct siginfo *, struct task_struct *); extern long do_rt_tgsigqueueinfo(pid_t tgid, pid_t pid, int sig, -- cgit v1.2.3 From d9588725e52650e82989707f8fd2feb67ad2dc8e Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Wed, 23 Sep 2009 15:57:04 -0700 Subject: signals: inline __fatal_signal_pending __fatal_signal_pending inlines to one instruction on x86, probably two instructions on other machines. It takes two longer x86 instructions just to call it and test its return value, not to mention the function itself. On my random x86_64 config, this saved 70 bytes of text (59 of those being __fatal_signal_pending itself). Signed-off-by: Roland McGrath Cc: Oleg Nesterov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/sched.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 9e5a88afe6be..e951bd2eb9fc 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2337,7 +2337,10 @@ static inline int signal_pending(struct task_struct *p) return unlikely(test_tsk_thread_flag(p,TIF_SIGPENDING)); } -extern int __fatal_signal_pending(struct task_struct *p); +static inline int __fatal_signal_pending(struct task_struct *p) +{ + return unlikely(sigismember(&p->pending.signal, SIGKILL)); +} static inline int fatal_signal_pending(struct task_struct *p) { -- cgit v1.2.3 From 8d65af789f3e2cf4cfbdbf71a0f7a61ebcd41d38 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Wed, 23 Sep 2009 15:57:19 -0700 Subject: sysctl: remove "struct file *" argument of ->proc_handler It's unused. It isn't needed -- read or write flag is already passed and sysctl shouldn't care about the rest. It _was_ used in two places at arch/frv for some reason. Signed-off-by: Alexey Dobriyan Cc: David Howells Cc: "Eric W. Biederman" Cc: Al Viro Cc: Ralf Baechle Cc: Martin Schwidefsky Cc: Ingo Molnar Cc: "David S. Miller" Cc: James Morris Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fs.h | 2 +- include/linux/ftrace.h | 4 ++-- include/linux/hugetlb.h | 6 +++--- include/linux/mm.h | 2 +- include/linux/mmzone.h | 13 ++++++------- include/linux/sched.h | 8 ++++---- include/linux/security.h | 2 +- include/linux/swap.h | 2 +- include/linux/sysctl.h | 19 +++++++++---------- include/linux/writeback.h | 11 +++++------ 10 files changed, 33 insertions(+), 36 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 51803528b095..33ed6644abd0 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2467,7 +2467,7 @@ ssize_t simple_attr_write(struct file *file, const char __user *buf, size_t len, loff_t *ppos); struct ctl_table; -int proc_nr_files(struct ctl_table *table, int write, struct file *filp, +int proc_nr_files(struct ctl_table *table, int write, void __user *buffer, size_t *lenp, loff_t *ppos); int __init get_filesystem_list(char *buf); diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 3c0924a18daf..cd3d2abaf30a 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -19,7 +19,7 @@ extern int ftrace_enabled; extern int ftrace_enable_sysctl(struct ctl_table *table, int write, - struct file *filp, void __user *buffer, size_t *lenp, + void __user *buffer, size_t *lenp, loff_t *ppos); typedef void (*ftrace_func_t)(unsigned long ip, unsigned long parent_ip); @@ -94,7 +94,7 @@ static inline void ftrace_start(void) { } extern int stack_tracer_enabled; int stack_trace_sysctl(struct ctl_table *table, int write, - struct file *file, void __user *buffer, size_t *lenp, + void __user *buffer, size_t *lenp, loff_t *ppos); #endif diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h index 176e7ee73eff..11ab19ac6b3d 100644 --- a/include/linux/hugetlb.h +++ b/include/linux/hugetlb.h @@ -20,9 +20,9 @@ static inline int is_vm_hugetlb_page(struct vm_area_struct *vma) } void reset_vma_resv_huge_pages(struct vm_area_struct *vma); -int hugetlb_sysctl_handler(struct ctl_table *, int, struct file *, void __user *, size_t *, loff_t *); -int hugetlb_overcommit_handler(struct ctl_table *, int, struct file *, void __user *, size_t *, loff_t *); -int hugetlb_treat_movable_handler(struct ctl_table *, int, struct file *, void __user *, size_t *, loff_t *); +int hugetlb_sysctl_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *); +int hugetlb_overcommit_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *); +int hugetlb_treat_movable_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *); int copy_hugetlb_page_range(struct mm_struct *, struct mm_struct *, struct vm_area_struct *); int follow_hugetlb_page(struct mm_struct *, struct vm_area_struct *, struct page **, struct vm_area_struct **, diff --git a/include/linux/mm.h b/include/linux/mm.h index b6eae5e3144b..87218ae84e36 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1279,7 +1279,7 @@ int in_gate_area_no_task(unsigned long addr); #define in_gate_area(task, addr) ({(void)task; in_gate_area_no_task(addr);}) #endif /* __HAVE_ARCH_GATE_AREA */ -int drop_caches_sysctl_handler(struct ctl_table *, int, struct file *, +int drop_caches_sysctl_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *); unsigned long shrink_slab(unsigned long scanned, gfp_t gfp_mask, unsigned long lru_pages); diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 652ef01be582..6f7561730d88 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -755,21 +755,20 @@ static inline int is_dma(struct zone *zone) /* These two functions are used to setup the per zone pages min values */ struct ctl_table; -struct file; -int min_free_kbytes_sysctl_handler(struct ctl_table *, int, struct file *, +int min_free_kbytes_sysctl_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *); extern int sysctl_lowmem_reserve_ratio[MAX_NR_ZONES-1]; -int lowmem_reserve_ratio_sysctl_handler(struct ctl_table *, int, struct file *, +int lowmem_reserve_ratio_sysctl_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *); -int percpu_pagelist_fraction_sysctl_handler(struct ctl_table *, int, struct file *, +int percpu_pagelist_fraction_sysctl_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *); int sysctl_min_unmapped_ratio_sysctl_handler(struct ctl_table *, int, - struct file *, void __user *, size_t *, loff_t *); + void __user *, size_t *, loff_t *); int sysctl_min_slab_ratio_sysctl_handler(struct ctl_table *, int, - struct file *, void __user *, size_t *, loff_t *); + void __user *, size_t *, loff_t *); extern int numa_zonelist_order_handler(struct ctl_table *, int, - struct file *, void __user *, size_t *, loff_t *); + void __user *, size_t *, loff_t *); extern char numa_zonelist_order[]; #define NUMA_ZONELIST_ORDER_LEN 16 /* string buffer size */ diff --git a/include/linux/sched.h b/include/linux/sched.h index e951bd2eb9fc..811cd96524d7 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -309,7 +309,7 @@ extern void softlockup_tick(void); extern void touch_softlockup_watchdog(void); extern void touch_all_softlockup_watchdogs(void); extern int proc_dosoftlockup_thresh(struct ctl_table *table, int write, - struct file *filp, void __user *buffer, + void __user *buffer, size_t *lenp, loff_t *ppos); extern unsigned int softlockup_panic; extern int softlockup_thresh; @@ -331,7 +331,7 @@ extern unsigned long sysctl_hung_task_check_count; extern unsigned long sysctl_hung_task_timeout_secs; extern unsigned long sysctl_hung_task_warnings; extern int proc_dohung_task_timeout_secs(struct ctl_table *table, int write, - struct file *filp, void __user *buffer, + void __user *buffer, size_t *lenp, loff_t *ppos); #endif @@ -1906,7 +1906,7 @@ extern unsigned int sysctl_sched_time_avg; extern unsigned int sysctl_timer_migration; int sched_nr_latency_handler(struct ctl_table *table, int write, - struct file *file, void __user *buffer, size_t *length, + void __user *buffer, size_t *length, loff_t *ppos); #endif #ifdef CONFIG_SCHED_DEBUG @@ -1924,7 +1924,7 @@ extern unsigned int sysctl_sched_rt_period; extern int sysctl_sched_rt_runtime; int sched_rt_handler(struct ctl_table *table, int write, - struct file *filp, void __user *buffer, size_t *lenp, + void __user *buffer, size_t *lenp, loff_t *ppos); extern unsigned int sysctl_sched_compat_yield; diff --git a/include/linux/security.h b/include/linux/security.h index d050b66ab9ef..239e40d0450b 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -133,7 +133,7 @@ static inline unsigned long round_hint_to_min(unsigned long hint) return PAGE_ALIGN(mmap_min_addr); return hint; } -extern int mmap_min_addr_handler(struct ctl_table *table, int write, struct file *filp, +extern int mmap_min_addr_handler(struct ctl_table *table, int write, void __user *buffer, size_t *lenp, loff_t *ppos); #ifdef CONFIG_SECURITY diff --git a/include/linux/swap.h b/include/linux/swap.h index 4c78fea989b9..82232dbea3f7 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -245,7 +245,7 @@ extern int page_evictable(struct page *page, struct vm_area_struct *vma); extern void scan_mapping_unevictable_pages(struct address_space *); extern unsigned long scan_unevictable_pages; -extern int scan_unevictable_handler(struct ctl_table *, int, struct file *, +extern int scan_unevictable_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *); extern int scan_unevictable_register_node(struct node *node); extern void scan_unevictable_unregister_node(struct node *node); diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h index e76d3b22a466..1e4743ee6831 100644 --- a/include/linux/sysctl.h +++ b/include/linux/sysctl.h @@ -29,7 +29,6 @@ #include #include -struct file; struct completion; #define CTL_MAXNAME 10 /* how many path components do we allow in a @@ -977,25 +976,25 @@ typedef int ctl_handler (struct ctl_table *table, void __user *oldval, size_t __user *oldlenp, void __user *newval, size_t newlen); -typedef int proc_handler (struct ctl_table *ctl, int write, struct file * filp, +typedef int proc_handler (struct ctl_table *ctl, int write, void __user *buffer, size_t *lenp, loff_t *ppos); -extern int proc_dostring(struct ctl_table *, int, struct file *, +extern int proc_dostring(struct ctl_table *, int, void __user *, size_t *, loff_t *); -extern int proc_dointvec(struct ctl_table *, int, struct file *, +extern int proc_dointvec(struct ctl_table *, int, void __user *, size_t *, loff_t *); -extern int proc_dointvec_minmax(struct ctl_table *, int, struct file *, +extern int proc_dointvec_minmax(struct ctl_table *, int, void __user *, size_t *, loff_t *); -extern int proc_dointvec_jiffies(struct ctl_table *, int, struct file *, +extern int proc_dointvec_jiffies(struct ctl_table *, int, void __user *, size_t *, loff_t *); -extern int proc_dointvec_userhz_jiffies(struct ctl_table *, int, struct file *, +extern int proc_dointvec_userhz_jiffies(struct ctl_table *, int, void __user *, size_t *, loff_t *); -extern int proc_dointvec_ms_jiffies(struct ctl_table *, int, struct file *, +extern int proc_dointvec_ms_jiffies(struct ctl_table *, int, void __user *, size_t *, loff_t *); -extern int proc_doulongvec_minmax(struct ctl_table *, int, struct file *, +extern int proc_doulongvec_minmax(struct ctl_table *, int, void __user *, size_t *, loff_t *); extern int proc_doulongvec_ms_jiffies_minmax(struct ctl_table *table, int, - struct file *, void __user *, size_t *, loff_t *); + void __user *, size_t *, loff_t *); extern int do_sysctl (int __user *name, int nlen, void __user *oldval, size_t __user *oldlenp, diff --git a/include/linux/writeback.h b/include/linux/writeback.h index 75cf58666ff9..66ebddcff664 100644 --- a/include/linux/writeback.h +++ b/include/linux/writeback.h @@ -110,21 +110,20 @@ extern int laptop_mode; extern unsigned long determine_dirtyable_memory(void); extern int dirty_background_ratio_handler(struct ctl_table *table, int write, - struct file *filp, void __user *buffer, size_t *lenp, + void __user *buffer, size_t *lenp, loff_t *ppos); extern int dirty_background_bytes_handler(struct ctl_table *table, int write, - struct file *filp, void __user *buffer, size_t *lenp, + void __user *buffer, size_t *lenp, loff_t *ppos); extern int dirty_ratio_handler(struct ctl_table *table, int write, - struct file *filp, void __user *buffer, size_t *lenp, + void __user *buffer, size_t *lenp, loff_t *ppos); extern int dirty_bytes_handler(struct ctl_table *table, int write, - struct file *filp, void __user *buffer, size_t *lenp, + void __user *buffer, size_t *lenp, loff_t *ppos); struct ctl_table; -struct file; -int dirty_writeback_centisecs_handler(struct ctl_table *, int, struct file *, +int dirty_writeback_centisecs_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *); void get_dirty_limits(unsigned long *pbackground, unsigned long *pdirty, -- cgit v1.2.3 From 9064a6787aa1d8ceaf5ba16fe1dfedb0755dc7eb Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 23 Sep 2009 15:57:23 -0700 Subject: linux/futex.h: place kernel types behind __KERNEL__ The forward decls for some kernel types are only needed by the code behind __KERNEL__, so don't bleed these types to userspace. Signed-off-by: Mike Frysinger Cc: Thomas Gleixner Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/futex.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/futex.h b/include/linux/futex.h index 34956c8fdebf..8ec17997d94f 100644 --- a/include/linux/futex.h +++ b/include/linux/futex.h @@ -4,11 +4,6 @@ #include #include -struct inode; -struct mm_struct; -struct task_struct; -union ktime; - /* Second argument to futex syscall */ @@ -129,6 +124,11 @@ struct robust_list_head { #define FUTEX_BITSET_MATCH_ANY 0xffffffff #ifdef __KERNEL__ +struct inode; +struct mm_struct; +struct task_struct; +union ktime; + long do_futex(u32 __user *uaddr, int op, u32 val, union ktime *timeout, u32 __user *uaddr2, u32 val2, u32 val3); -- cgit v1.2.3 From 858f09930b32c11b40fd0c5c467982ba09b10894 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Wed, 23 Sep 2009 15:57:32 -0700 Subject: aio: ifdef fields in mm_struct ->ioctx_lock and ->ioctx_list are used only under CONFIG_AIO. Signed-off-by: Alexey Dobriyan Cc: Zach Brown Cc: Benjamin LaHaise Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mm_types.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 0042090a4d70..6b7029ab9c8e 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -259,11 +259,10 @@ struct mm_struct { unsigned long flags; /* Must use atomic bitops to access the bits */ struct core_state *core_state; /* coredumping support */ - - /* aio bits */ +#ifdef CONFIG_AIO spinlock_t ioctx_lock; struct hlist_head ioctx_list; - +#endif #ifdef CONFIG_MM_OWNER /* * "owner" points to a task that is regarded as the canonical -- cgit v1.2.3 From 2fa4341074cd02fb39aa23410740764948755635 Mon Sep 17 00:00:00 2001 From: Albin Tonnerre Date: Wed, 23 Sep 2009 15:57:38 -0700 Subject: include/linux/unaligned/{l,b}e_byteshift.h: fix usage for compressed kernels When unaligned accesses are required for uncompressing a kernel (such as for LZO decompression on ARM in a patch that follows), including causes issues as it brings in a lot of things that are not available in the decompression environment. linux/kernel.h brings at least: extern int console_printk[]; extern const char hex_asc[]; which causes errors at link-time as they are not available when compiling the pre-boot environement. There are also a few others: arch/arm/boot/compressed/misc.o: In function `valid_user_regs': arch/arm/include/asm/ptrace.h:158: undefined reference to `elf_hwcap' arch/arm/boot/compressed/misc.o: In function `console_silent': include/linux/kernel.h:292: undefined reference to `console_printk' arch/arm/boot/compressed/misc.o: In function `console_verbose': include/linux/kernel.h:297: undefined reference to `console_printk' arch/arm/boot/compressed/misc.o: In function `pack_hex_byte': include/linux/kernel.h:360: undefined reference to `hex_asc' arch/arm/boot/compressed/misc.o: In function `hweight_long': include/linux/bitops.h:45: undefined reference to `hweight32' arch/arm/boot/compressed/misc.o: In function `__cmpxchg_local_generic': include/asm-generic/cmpxchg-local.h:21: undefined reference to `wrong_size_cmpxchg' include/asm-generic/cmpxchg-local.h:42: undefined reference to `wrong_size_cmpxchg' arch/arm/boot/compressed/misc.o: In function `__xchg': arch/arm/include/asm/system.h:309: undefined reference to `__bad_xchg' However, those files apparently use nothing from , all they need is the declaration of types such as u32 or u64, so should be enough Signed-off-by: Albin Tonnerre Cc: Sam Ravnborg Cc: Russell King Cc: Ingo Molnar Cc: Thomas Gleixner Cc: "H. Peter Anvin" Cc: Phillip Lougher Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/unaligned/be_byteshift.h | 2 +- include/linux/unaligned/le_byteshift.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/unaligned/be_byteshift.h b/include/linux/unaligned/be_byteshift.h index 46dd12c5709e..9356b24223ac 100644 --- a/include/linux/unaligned/be_byteshift.h +++ b/include/linux/unaligned/be_byteshift.h @@ -1,7 +1,7 @@ #ifndef _LINUX_UNALIGNED_BE_BYTESHIFT_H #define _LINUX_UNALIGNED_BE_BYTESHIFT_H -#include +#include static inline u16 __get_unaligned_be16(const u8 *p) { diff --git a/include/linux/unaligned/le_byteshift.h b/include/linux/unaligned/le_byteshift.h index 59777e951baf..be376fb79b64 100644 --- a/include/linux/unaligned/le_byteshift.h +++ b/include/linux/unaligned/le_byteshift.h @@ -1,7 +1,7 @@ #ifndef _LINUX_UNALIGNED_LE_BYTESHIFT_H #define _LINUX_UNALIGNED_LE_BYTESHIFT_H -#include +#include static inline u16 __get_unaligned_le16(const u8 *p) { -- cgit v1.2.3 From 801460d0cf5c5288153b722565773059b0f44348 Mon Sep 17 00:00:00 2001 From: Hiroshi Shimamoto Date: Wed, 23 Sep 2009 15:57:41 -0700 Subject: task_struct cleanup: move binfmt field to mm_struct Because the binfmt is not different between threads in the same process, it can be moved from task_struct to mm_struct. And binfmt moudle is handled per mm_struct instead of task_struct. Signed-off-by: Hiroshi Shimamoto Acked-by: Oleg Nesterov Cc: Rusty Russell Acked-by: Roland McGrath Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mm_types.h | 2 ++ include/linux/sched.h | 1 - 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 6b7029ab9c8e..21d6aa45206a 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -240,6 +240,8 @@ struct mm_struct { unsigned long saved_auxv[AT_VECTOR_SIZE]; /* for /proc/PID/auxv */ + struct linux_binfmt *binfmt; + cpumask_t cpu_vm_mask; /* Architecture-specific MM context */ diff --git a/include/linux/sched.h b/include/linux/sched.h index 811cd96524d7..8a16f6d11dcd 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1271,7 +1271,6 @@ struct task_struct { struct mm_struct *mm, *active_mm; /* task state */ - struct linux_binfmt *binfmt; int exit_state; int exit_code, exit_signal; int pdeath_signal; /* The signal sent when the parent dies */ -- cgit v1.2.3 From 4a4962263f07d14660849ec134ee42b63e95ea9a Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 6 Jul 2009 14:50:42 +0100 Subject: module: reduce symbol table for loaded modules (v2) Discard all symbols not interesting for kallsyms use: absolute, section, and in the common case (!KALLSYMS_ALL) data ones. Signed-off-by: Jan Beulich Signed-off-by: Rusty Russell --- include/linux/module.h | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/module.h b/include/linux/module.h index 1c755b2f937d..1d3ccb173fd6 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -308,9 +308,13 @@ struct module #endif #ifdef CONFIG_KALLSYMS - /* We keep the symbol and string tables for kallsyms. */ - Elf_Sym *symtab; - unsigned int num_symtab; + /* + * We keep the symbol and string tables for kallsyms. + * The core_* fields below are temporary, loader-only (they + * could really be discarded after module init). + */ + Elf_Sym *symtab, *core_symtab; + unsigned int num_symtab, core_num_syms; char *strtab; /* Section attributes */ -- cgit v1.2.3 From 554bdfe5acf3715e87c8d5e25a4f9a896ac9f014 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 6 Jul 2009 14:51:44 +0100 Subject: module: reduce string table for loaded modules (v2) Also remove all parts of the string table (referenced by the symbol table) that are not needed for kallsyms use (i.e. which were only referenced by symbols discarded by the previous patch, or not referenced at all for whatever reason). Signed-off-by: Jan Beulich Signed-off-by: Rusty Russell --- include/linux/module.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/module.h b/include/linux/module.h index 1d3ccb173fd6..aca980365956 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -315,7 +315,7 @@ struct module */ Elf_Sym *symtab, *core_symtab; unsigned int num_symtab, core_num_syms; - char *strtab; + char *strtab, *core_strtab; /* Section attributes */ struct module_sect_attrs *sect_attrs; -- cgit v1.2.3 From 1d7015caa082d465faeae5d6fd1be077ee6dfa87 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 25 Sep 2009 00:32:58 -0600 Subject: module: preferred way to use MODULE_AUTHOR For the longest time now we've been using multiple MODULE_AUTHOR() statements when a module has more than one author, but the comment here disagrees. Signed-off-by: Johannes Berg Cc: Jiri Kosina Cc: Luciano Coelho Signed-off-by: Andrew Morton Signed-off-by: Rusty Russell --- include/linux/module.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/module.h b/include/linux/module.h index aca980365956..482efc865acf 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -128,7 +128,10 @@ extern struct module __this_module; */ #define MODULE_LICENSE(_license) MODULE_INFO(license, _license) -/* Author, ideally of form NAME[, NAME]*[ and NAME] */ +/* + * Author(s), use "Name " or just "Name", for multiple + * authors use multiple MODULE_AUTHOR() statements/lines. + */ #define MODULE_AUTHOR(_author) MODULE_INFO(author, _author) /* What your module does. */ -- cgit v1.2.3 From 18a1166de994685d770425086b2bcc1ba567f7ed Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?R=C3=A9mi=20Denis-Courmont?= Date: Wed, 23 Sep 2009 03:17:11 +0000 Subject: Phonet: error on broadcast sending (unimplemented) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If we ever implement this, then we can stop returning an error. Signed-off-by: Rémi Denis-Courmont Signed-off-by: David S. Miller --- include/linux/phonet.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/phonet.h b/include/linux/phonet.h index 1ef5a0781831..e5126cff9b2a 100644 --- a/include/linux/phonet.h +++ b/include/linux/phonet.h @@ -38,6 +38,7 @@ #define PNPIPE_IFINDEX 2 #define PNADDR_ANY 0 +#define PNADDR_BROADCAST 0xFC #define PNPORT_RESOURCE_ROUTING 0 /* Values for PNPIPE_ENCAP option */ -- cgit v1.2.3 From b8273570f802a7658827dcb077b0b517ba75a289 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 24 Sep 2009 15:44:05 -0700 Subject: genetlink: fix netns vs. netlink table locking (2) Similar to commit d136f1bd366fdb7e747ca7e0218171e7a00a98a5, there's a bug when unregistering a generic netlink family, which is caught by the might_sleep() added in that commit: BUG: sleeping function called from invalid context at net/netlink/af_netlink.c:183 in_atomic(): 1, irqs_disabled(): 0, pid: 1510, name: rmmod 2 locks held by rmmod/1510: #0: (genl_mutex){+.+.+.}, at: [] genl_unregister_family+0x2b/0x130 #1: (rcu_read_lock){.+.+..}, at: [] __genl_unregister_mc_group+0x1c/0x120 Pid: 1510, comm: rmmod Not tainted 2.6.31-wl #444 Call Trace: [] __might_sleep+0x119/0x150 [] netlink_table_grab+0x21/0x100 [] netlink_clear_multicast_users+0x23/0x60 [] __genl_unregister_mc_group+0x71/0x120 [] genl_unregister_family+0x56/0x130 [] nl80211_exit+0x15/0x20 [cfg80211] [] cfg80211_exit+0x1a/0x40 [cfg80211] Fix in the same way by grabbing the netlink table lock before doing rcu_read_lock(). Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- include/linux/netlink.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/netlink.h b/include/linux/netlink.h index 080f6ba9e73a..ab5d3126831f 100644 --- a/include/linux/netlink.h +++ b/include/linux/netlink.h @@ -187,6 +187,7 @@ extern struct sock *netlink_kernel_create(struct net *net, extern void netlink_kernel_release(struct sock *sk); extern int __netlink_change_ngroups(struct sock *sk, unsigned int groups); extern int netlink_change_ngroups(struct sock *sk, unsigned int groups); +extern void __netlink_clear_multicast_users(struct sock *sk, unsigned int group); extern void netlink_clear_multicast_users(struct sock *sk, unsigned int group); extern void netlink_ack(struct sk_buff *in_skb, struct nlmsghdr *nlh, int err); extern int netlink_has_listeners(struct sock *sk, unsigned int group); -- cgit v1.2.3 From e9ea0e2d1d00959b451dfc239df126d3c6a22043 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 24 Sep 2009 14:47:45 -0700 Subject: hugetlb_file_setup(): use C, not cpp Why macros are always wrong: mm/mmap.c: In function 'do_mmap_pgoff': mm/mmap.c:953: warning: unused variable 'user' also, move a couple of struct forward-decls outside `#ifdef CONFIG_HUGETLB_PAGE' - it's pointless and frequently harmful to make these conditional (eg, this patch needed `struct user_struct'). Cc: Lee Schermerhorn Cc: Mel Gorman Cc: Nishanth Aravamudan Cc: David Rientjes Cc: Adam Litke Cc: Andy Whitcroft Cc: Eric Whitney Cc: Eric B Munson Cc: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/hugetlb.h | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h index 11ab19ac6b3d..16937995abd4 100644 --- a/include/linux/hugetlb.h +++ b/include/linux/hugetlb.h @@ -3,15 +3,15 @@ #include +struct ctl_table; +struct user_struct; + #ifdef CONFIG_HUGETLB_PAGE #include #include #include -struct ctl_table; -struct user_struct; - int PageHuge(struct page *page); static inline int is_vm_hugetlb_page(struct vm_area_struct *vma) @@ -187,7 +187,11 @@ static inline void set_file_hugepages(struct file *file) #define is_file_hugepages(file) 0 #define set_file_hugepages(file) BUG() -#define hugetlb_file_setup(name,size,acct,user,creat) ERR_PTR(-ENOSYS) +static inline struct file *hugetlb_file_setup(const char *name, size_t size, + int acctflag, struct user_struct **user, int creat_flags) +{ + return ERR_PTR(-ENOSYS); +} #endif /* !CONFIG_HUGETLBFS */ -- cgit v1.2.3 From 934831d060ccd5471ecbc562804a8d3ccd6e562c Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 24 Sep 2009 12:33:32 +0100 Subject: NOMMU: Fallback for is_vmalloc_or_module_addr() should be inline The NOMMU fallback for is_vmalloc_or_module_addr() should be static inline, not just static, in linux/mm.h. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- include/linux/mm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index df08551cb0ad..24c395694f4d 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -288,7 +288,7 @@ static inline int is_vmalloc_addr(const void *x) #ifdef CONFIG_MMU extern int is_vmalloc_or_module_addr(const void *x); #else -static int is_vmalloc_or_module_addr(const void *x) +static inline int is_vmalloc_or_module_addr(const void *x) { return 0; } -- cgit v1.2.3 From a72bfd4dea053bb8e2233902c3f1893ef5485802 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Sat, 26 Sep 2009 00:07:46 +0200 Subject: writeback: pass in super_block to bdi_start_writeback() Sometimes we only want to write pages from a specific super_block, so allow that to be passed in. This fixes a problem with commit 56a131dcf7ed36c3c6e36bea448b674ea85ed5bb causing writeback on all super_blocks on a bdi, where we only really want to sync a specific sb from writeback_inodes_sb(). Signed-off-by: Jens Axboe --- include/linux/backing-dev.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h index 0ee33c2e6129..b449e738533a 100644 --- a/include/linux/backing-dev.h +++ b/include/linux/backing-dev.h @@ -101,7 +101,8 @@ int bdi_register(struct backing_dev_info *bdi, struct device *parent, const char *fmt, ...); int bdi_register_dev(struct backing_dev_info *bdi, dev_t dev); void bdi_unregister(struct backing_dev_info *bdi); -void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages); +void bdi_start_writeback(struct backing_dev_info *bdi, struct super_block *sb, + long nr_pages); int bdi_writeback_task(struct bdi_writeback *wb); int bdi_has_dirty_io(struct backing_dev_info *bdi); -- cgit v1.2.3 From 1d1764c39815db55e10b2d78732db4d6dd9d6039 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sat, 26 Sep 2009 19:37:22 +0400 Subject: headers: kref.h redux * remove asm/atomic.h inclusion from kref.h -- not needed, linux/types.h is enough for atomic_t * remove linux/kref.h inclusion from files which do not need it. Signed-off-by: Alexey Dobriyan Signed-off-by: Linus Torvalds --- include/linux/ipc.h | 2 -- include/linux/kref.h | 1 - include/linux/nfs_fs.h | 1 - 3 files changed, 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ipc.h b/include/linux/ipc.h index b8826107b518..3b1594d662b0 100644 --- a/include/linux/ipc.h +++ b/include/linux/ipc.h @@ -78,8 +78,6 @@ struct ipc_kludge { #define IPCCALL(version,op) ((version)<<16 | (op)) #ifdef __KERNEL__ - -#include #include #define IPCMNI 32768 /* <= MAX_INT limit for ipc arrays (including sysctl changes) */ diff --git a/include/linux/kref.h b/include/linux/kref.h index 0cef6badd6fb..b0cb0ebad9e6 100644 --- a/include/linux/kref.h +++ b/include/linux/kref.h @@ -16,7 +16,6 @@ #define _KREF_H_ #include -#include struct kref { atomic_t refcount; diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index f6b90240dd41..d09db1bc9083 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -40,7 +40,6 @@ #ifdef __KERNEL__ #include -#include #include #include #include -- cgit v1.2.3 From f0f37e2f77731b3473fa6bd5ee53255d9a9cdb40 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sun, 27 Sep 2009 22:29:37 +0400 Subject: const: mark struct vm_struct_operations * mark struct vm_area_struct::vm_ops as const * mark vm_ops in AGP code But leave TTM code alone, something is fishy there with global vm_ops being used. Signed-off-by: Alexey Dobriyan Signed-off-by: Linus Torvalds --- include/linux/agp_backend.h | 2 +- include/linux/hugetlb.h | 2 +- include/linux/mm_types.h | 2 +- include/linux/ramfs.h | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/agp_backend.h b/include/linux/agp_backend.h index 880130f7311f..9101ed64f803 100644 --- a/include/linux/agp_backend.h +++ b/include/linux/agp_backend.h @@ -53,7 +53,7 @@ struct agp_kern_info { int current_memory; bool cant_use_aperture; unsigned long page_mask; - struct vm_operations_struct *vm_ops; + const struct vm_operations_struct *vm_ops; }; /* diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h index 16937995abd4..41a59afc70fa 100644 --- a/include/linux/hugetlb.h +++ b/include/linux/hugetlb.h @@ -163,7 +163,7 @@ static inline struct hugetlbfs_sb_info *HUGETLBFS_SB(struct super_block *sb) } extern const struct file_operations hugetlbfs_file_operations; -extern struct vm_operations_struct hugetlb_vm_ops; +extern const struct vm_operations_struct hugetlb_vm_ops; struct file *hugetlb_file_setup(const char *name, size_t size, int acct, struct user_struct **user, int creat_flags); int hugetlb_get_quota(struct address_space *mapping, long delta); diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 21d6aa45206a..84a524afb3dc 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -171,7 +171,7 @@ struct vm_area_struct { struct anon_vma *anon_vma; /* Serialized by page_table_lock */ /* Function pointers to deal with this struct. */ - struct vm_operations_struct * vm_ops; + const struct vm_operations_struct *vm_ops; /* Information about our backing store: */ unsigned long vm_pgoff; /* Offset (within vm_file) in PAGE_SIZE diff --git a/include/linux/ramfs.h b/include/linux/ramfs.h index 37aaf2b39863..4e768dda87b0 100644 --- a/include/linux/ramfs.h +++ b/include/linux/ramfs.h @@ -17,7 +17,7 @@ extern int ramfs_nommu_mmap(struct file *file, struct vm_area_struct *vma); #endif extern const struct file_operations ramfs_file_operations; -extern struct vm_operations_struct generic_file_vm_ops; +extern const struct vm_operations_struct generic_file_vm_ops; extern int __init init_rootfs(void); #endif -- cgit v1.2.3 From f278a2f7bbc2239f479eaf63d0b3ae573b1d746c Mon Sep 17 00:00:00 2001 From: Dave Young Date: Sun, 27 Sep 2009 16:00:42 +0000 Subject: tty: Fix regressions caused by commit b50989dc The following commit made console open fails while booting: commit b50989dc444599c8b21edc23536fc305f4e9b7d5 Author: Alan Cox Date: Sat Sep 19 13:13:22 2009 -0700 tty: make the kref destructor occur asynchronously Due to tty release routines run in a workqueue now, error like the following will be reported while booting: INIT open /dev/console Input/output error It also causes hibernation regression to appear as reported at http://bugzilla.kernel.org/show_bug.cgi?id=14229 The reason is that now there's latency issue with closing, but when we open a "closing not finished" tty, -EIO will be returned. Fix it as per the following Alan's suggestion: Fun but it's actually not a bug and the fix is wrong in itself as the port may be closing but not yet being destructed, in which case it seems to do the wrong thing. Opening a tty that is closing (and could be closing for long periods) is supposed to return -EIO. I suspect a better way to deal with this and keep the old console timing is to split tty->shutdown into two functions. tty->shutdown() - called synchronously just before we dump the tty onto the waitqueue for destruction tty->cleanup() - called when the destructor runs. We would then do the shutdown part which can occur in IRQ context fine, before queueing the rest of the release (from tty->magic = 0 ... the end) to occur asynchronously The USB update in -next would then need a call like if (tty->cleanup) tty->cleanup(tty); at the top of the async function and the USB shutdown to be split between shutdown and cleanup as the USB resource cleanup and final tidy cannot occur synchronously as it needs to sleep. In other words the logic becomes final kref put make object unfindable async clean it up Signed-off-by: Dave Young [ rjw: Rebased on top of 2.6.31-git, reworked the changelog. ] Signed-off-by: "Rafael J. Wysocki" [ Changed serial naming to match new rules, dropped tty_shutdown as per comments from Alan Stern - Linus ] Signed-off-by: Linus Torvalds --- include/linux/tty_driver.h | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h index 3566129384a4..b08677982525 100644 --- a/include/linux/tty_driver.h +++ b/include/linux/tty_driver.h @@ -45,8 +45,16 @@ * * void (*shutdown)(struct tty_struct * tty); * - * This routine is called when a particular tty device is closed for - * the last time freeing up the resources. + * This routine is called synchronously when a particular tty device + * is closed for the last time freeing up the resources. + * + * + * void (*cleanup)(struct tty_struct * tty); + * + * This routine is called asynchronously when a particular tty device + * is closed for the last time freeing up the resources. This is + * actually the second part of shutdown for routines that might sleep. + * * * int (*write)(struct tty_struct * tty, * const unsigned char *buf, int count); @@ -233,6 +241,7 @@ struct tty_operations { int (*open)(struct tty_struct * tty, struct file * filp); void (*close)(struct tty_struct * tty, struct file * filp); void (*shutdown)(struct tty_struct *tty); + void (*cleanup)(struct tty_struct *tty); int (*write)(struct tty_struct * tty, const unsigned char *buf, int count); int (*put_char)(struct tty_struct *tty, unsigned char ch); -- cgit v1.2.3