From ad26aa6c60974acf3228ed0ade97ba5793093dbe Mon Sep 17 00:00:00 2001 From: Jonghwa Lee Date: Thu, 8 Jan 2015 11:04:07 +0900 Subject: regulator: s2mps11: Fix wrong calculation of register offset This patch adds missing registers('BUCK7_SW' & 'LDO29_CTRL'). Since BUCK7 has 1 more register (BUCK7_SW) than others, register offset should be added one more for which has bigger address than BUCK7 registers. Fixes: 76b9840b24ae04(regulator: s2mps11: Add support S2MPS13 regulator device) Signed-off-by: Jonghwa Lee Signed-off-by: Chanwoo Choi Signed-off-by: Mark Brown Cc: --- include/linux/mfd/samsung/s2mps13.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/samsung/s2mps13.h b/include/linux/mfd/samsung/s2mps13.h index ce5dda8958fe..b1fd675fa36f 100644 --- a/include/linux/mfd/samsung/s2mps13.h +++ b/include/linux/mfd/samsung/s2mps13.h @@ -59,6 +59,7 @@ enum s2mps13_reg { S2MPS13_REG_B6CTRL, S2MPS13_REG_B6OUT, S2MPS13_REG_B7CTRL, + S2MPS13_REG_B7SW, S2MPS13_REG_B7OUT, S2MPS13_REG_B8CTRL, S2MPS13_REG_B8OUT, @@ -102,6 +103,7 @@ enum s2mps13_reg { S2MPS13_REG_L26CTRL, S2MPS13_REG_L27CTRL, S2MPS13_REG_L28CTRL, + S2MPS13_REG_L29CTRL, S2MPS13_REG_L30CTRL, S2MPS13_REG_L31CTRL, S2MPS13_REG_L32CTRL, -- cgit v1.2.3 From d5fd120e7860c2b3d4c936a2ebadb6b244bec4c8 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 26 Jan 2015 20:59:31 +0100 Subject: i2c: Only include slave support if selected Make the slave support depend on CONFIG_I2C_SLAVE. Otherwise it gets included unconditionally, even when it is not needed. I2C bus drivers which implement slave support must select I2C_SLAVE. Signed-off-by: Jean Delvare Signed-off-by: Wolfram Sang --- include/linux/i2c.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/i2c.h b/include/linux/i2c.h index e3a1721c8354..7c7695940ddd 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -228,7 +228,9 @@ struct i2c_client { struct device dev; /* the device structure */ int irq; /* irq issued by device */ struct list_head detected; +#if IS_ENABLED(CONFIG_I2C_SLAVE) i2c_slave_cb_t slave_cb; /* callback for slave mode */ +#endif }; #define to_i2c_client(d) container_of(d, struct i2c_client, dev) @@ -253,6 +255,7 @@ static inline void i2c_set_clientdata(struct i2c_client *dev, void *data) /* I2C slave support */ +#if IS_ENABLED(CONFIG_I2C_SLAVE) enum i2c_slave_event { I2C_SLAVE_REQ_READ_START, I2C_SLAVE_REQ_READ_END, @@ -269,6 +272,7 @@ static inline int i2c_slave_event(struct i2c_client *client, { return client->slave_cb(client, event, val); } +#endif /** * struct i2c_board_info - template for device creation @@ -404,8 +408,10 @@ struct i2c_algorithm { /* To determine what the adapter supports */ u32 (*functionality) (struct i2c_adapter *); +#if IS_ENABLED(CONFIG_I2C_SLAVE) int (*reg_slave)(struct i2c_client *client); int (*unreg_slave)(struct i2c_client *client); +#endif }; /** -- cgit v1.2.3 From 9879de7373fcfb466ec198293b6ccc1ad7a42dd8 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Mon, 26 Jan 2015 12:58:32 -0800 Subject: mm: page_alloc: embed OOM killing naturally into allocation slowpath The OOM killing invocation does a lot of duplicative checks against the task's allocation context. Rework it to take advantage of the existing checks in the allocator slowpath. The OOM killer is invoked when the allocator is unable to reclaim any pages but the allocation has to keep looping. Instead of having a check for __GFP_NORETRY hidden in oom_gfp_allowed(), just move the OOM invocation to the true branch of should_alloc_retry(). The __GFP_FS check from oom_gfp_allowed() can then be moved into the OOM avoidance branch in __alloc_pages_may_oom(), along with the PF_DUMPCORE test. __alloc_pages_may_oom() can then signal to the caller whether the OOM killer was invoked, instead of requiring it to duplicate the order and high_zoneidx checks to guess this when deciding whether to continue. Signed-off-by: Johannes Weiner Acked-by: Michal Hocko Cc: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/oom.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/oom.h b/include/linux/oom.h index 853698c721f7..76200984d1e2 100644 --- a/include/linux/oom.h +++ b/include/linux/oom.h @@ -85,11 +85,6 @@ static inline void oom_killer_enable(void) oom_killer_disabled = false; } -static inline bool oom_gfp_allowed(gfp_t gfp_mask) -{ - return (gfp_mask & __GFP_FS) && !(gfp_mask & __GFP_NORETRY); -} - extern struct task_struct *find_lock_task_mm(struct task_struct *p); static inline bool task_will_free_mem(struct task_struct *task) -- cgit v1.2.3 From 07261edb971492c6b41b44d7b1b51f76807d30ad Mon Sep 17 00:00:00 2001 From: Pranith Kumar Date: Mon, 26 Jan 2015 12:58:43 -0800 Subject: printk: add dummy routine for when CONFIG_PRINTK=n There are missing dummy routines for log_buf_addr_get() and log_buf_len_get() for when CONFIG_PRINTK is not set causing build failures. This patch adds these dummy routines at the appropriate location. Signed-off-by: Pranith Kumar Cc: Michael Ellerman Reviewed-by: Petr Mladek Acked-by: Steven Rostedt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/printk.h | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/printk.h b/include/linux/printk.h index c8f170324e64..4d5bf5726578 100644 --- a/include/linux/printk.h +++ b/include/linux/printk.h @@ -10,9 +10,6 @@ extern const char linux_banner[]; extern const char linux_proc_banner[]; -extern char *log_buf_addr_get(void); -extern u32 log_buf_len_get(void); - static inline int printk_get_level(const char *buffer) { if (buffer[0] == KERN_SOH_ASCII && buffer[1]) { @@ -163,6 +160,8 @@ extern int kptr_restrict; extern void wake_up_klogd(void); +char *log_buf_addr_get(void); +u32 log_buf_len_get(void); void log_buf_kexec_setup(void); void __init setup_log_buf(int early); void dump_stack_set_arch_desc(const char *fmt, ...); @@ -198,6 +197,16 @@ static inline void wake_up_klogd(void) { } +static inline char *log_buf_addr_get(void) +{ + return NULL; +} + +static inline u32 log_buf_len_get(void) +{ + return 0; +} + static inline void log_buf_kexec_setup(void) { } -- cgit v1.2.3 From 14bf61ffe6ac54afcd1e888a4407fe16054483db Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Thu, 9 Oct 2014 16:03:13 +0200 Subject: quota: Switch ->get_dqblk() and ->set_dqblk() to use bytes as space units Currently ->get_dqblk() and ->set_dqblk() use struct fs_disk_quota which tracks space limits and usage in 512-byte blocks. However VFS quotas track usage in bytes (as some filesystems require that) and we need to somehow pass this information. Upto now it wasn't a problem because we didn't do any unit conversion (thus VFS quota routines happily stuck number of bytes into d_bcount field of struct fd_disk_quota). Only if you tried to use Q_XGETQUOTA or Q_XSETQLIM for VFS quotas (or Q_GETQUOTA / Q_SETQUOTA for XFS quotas), you got bogus results. Hardly anyone tried this but reportedly some Samba users hit the problem in practice. So when we want interfaces compatible we need to fix this. We bite the bullet and define another quota structure used for passing information from/to ->get_dqblk()/->set_dqblk. It's somewhat sad we have to have more conversion routines in fs/quota/quota.c and another copying of quota structure slows down getting of quota information by about 2% but it seems cleaner than overloading e.g. units of d_bcount to bytes. CC: stable@vger.kernel.org Reviewed-by: Christoph Hellwig Signed-off-by: Jan Kara --- include/linux/quota.h | 47 +++++++++++++++++++++++++++++++++++++++++++++-- include/linux/quotaops.h | 4 ++-- 2 files changed, 47 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/quota.h b/include/linux/quota.h index 50978b781a19..097d7eb2441e 100644 --- a/include/linux/quota.h +++ b/include/linux/quota.h @@ -321,6 +321,49 @@ struct dquot_operations { struct path; +/* Structure for communicating via ->get_dqblk() & ->set_dqblk() */ +struct qc_dqblk { + int d_fieldmask; /* mask of fields to change in ->set_dqblk() */ + u64 d_spc_hardlimit; /* absolute limit on used space */ + u64 d_spc_softlimit; /* preferred limit on used space */ + u64 d_ino_hardlimit; /* maximum # allocated inodes */ + u64 d_ino_softlimit; /* preferred inode limit */ + u64 d_space; /* Space owned by the user */ + u64 d_ino_count; /* # inodes owned by the user */ + s64 d_ino_timer; /* zero if within inode limits */ + /* if not, we refuse service */ + s64 d_spc_timer; /* similar to above; for space */ + int d_ino_warns; /* # warnings issued wrt num inodes */ + int d_spc_warns; /* # warnings issued wrt used space */ + u64 d_rt_spc_hardlimit; /* absolute limit on realtime space */ + u64 d_rt_spc_softlimit; /* preferred limit on RT space */ + u64 d_rt_space; /* realtime space owned */ + s64 d_rt_spc_timer; /* similar to above; for RT space */ + int d_rt_spc_warns; /* # warnings issued wrt RT space */ +}; + +/* Field specifiers for ->set_dqblk() in struct qc_dqblk */ +#define QC_INO_SOFT (1<<0) +#define QC_INO_HARD (1<<1) +#define QC_SPC_SOFT (1<<2) +#define QC_SPC_HARD (1<<3) +#define QC_RT_SPC_SOFT (1<<4) +#define QC_RT_SPC_HARD (1<<5) +#define QC_LIMIT_MASK (QC_INO_SOFT | QC_INO_HARD | QC_SPC_SOFT | QC_SPC_HARD | \ + QC_RT_SPC_SOFT | QC_RT_SPC_HARD) +#define QC_SPC_TIMER (1<<6) +#define QC_INO_TIMER (1<<7) +#define QC_RT_SPC_TIMER (1<<8) +#define QC_TIMER_MASK (QC_SPC_TIMER | QC_INO_TIMER | QC_RT_SPC_TIMER) +#define QC_SPC_WARNS (1<<9) +#define QC_INO_WARNS (1<<10) +#define QC_RT_SPC_WARNS (1<<11) +#define QC_WARNS_MASK (QC_SPC_WARNS | QC_INO_WARNS | QC_RT_SPC_WARNS) +#define QC_SPACE (1<<12) +#define QC_INO_COUNT (1<<13) +#define QC_RT_SPACE (1<<14) +#define QC_ACCT_MASK (QC_SPACE | QC_INO_COUNT | QC_RT_SPACE) + /* Operations handling requests from userspace */ struct quotactl_ops { int (*quota_on)(struct super_block *, int, int, struct path *); @@ -329,8 +372,8 @@ struct quotactl_ops { int (*quota_sync)(struct super_block *, int); int (*get_info)(struct super_block *, int, struct if_dqinfo *); int (*set_info)(struct super_block *, int, struct if_dqinfo *); - int (*get_dqblk)(struct super_block *, struct kqid, struct fs_disk_quota *); - int (*set_dqblk)(struct super_block *, struct kqid, struct fs_disk_quota *); + int (*get_dqblk)(struct super_block *, struct kqid, struct qc_dqblk *); + int (*set_dqblk)(struct super_block *, struct kqid, struct qc_dqblk *); int (*get_xstate)(struct super_block *, struct fs_quota_stat *); int (*set_xstate)(struct super_block *, unsigned int, int); int (*get_xstatev)(struct super_block *, struct fs_quota_statv *); diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h index f23538a6e411..29e3455f7d41 100644 --- a/include/linux/quotaops.h +++ b/include/linux/quotaops.h @@ -98,9 +98,9 @@ int dquot_quota_sync(struct super_block *sb, int type); int dquot_get_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii); int dquot_set_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii); int dquot_get_dqblk(struct super_block *sb, struct kqid id, - struct fs_disk_quota *di); + struct qc_dqblk *di); int dquot_set_dqblk(struct super_block *sb, struct kqid id, - struct fs_disk_quota *di); + struct qc_dqblk *di); int __dquot_transfer(struct inode *inode, struct dquot **transfer_to); int dquot_transfer(struct inode *inode, struct iattr *iattr); -- cgit v1.2.3 From c3c87e770458aa004bd7ed3f29945ff436fd6511 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 23 Jan 2015 11:19:48 +0100 Subject: perf: Tighten (and fix) the grouping condition The fix from 9fc81d87420d ("perf: Fix events installation during moving group") was incomplete in that it failed to recognise that creating a group with events for different CPUs is semantically broken -- they cannot be co-scheduled. Furthermore, it leads to real breakage where, when we create an event for CPU Y and then migrate it to form a group on CPU X, the code gets confused where the counter is programmed -- triggered in practice as well by me via the perf fuzzer. Fix this by tightening the rules for creating groups. Only allow grouping of counters that can be co-scheduled in the same context. This means for the same task and/or the same cpu. Fixes: 9fc81d87420d ("perf: Fix events installation during moving group") Signed-off-by: Peter Zijlstra (Intel) Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Link: http://lkml.kernel.org/r/20150123125834.090683288@infradead.org Signed-off-by: Ingo Molnar --- include/linux/perf_event.h | 6 ------ 1 file changed, 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 4f7a61ca4b39..664de5a4ec46 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -450,11 +450,6 @@ struct perf_event { #endif /* CONFIG_PERF_EVENTS */ }; -enum perf_event_context_type { - task_context, - cpu_context, -}; - /** * struct perf_event_context - event context structure * @@ -462,7 +457,6 @@ enum perf_event_context_type { */ struct perf_event_context { struct pmu *pmu; - enum perf_event_context_type type; /* * Protect the states of the events in the list, * nr_active, and the list: -- cgit v1.2.3 From 33692f27597fcab536d7cbbcc8f52905133e4aa7 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 29 Jan 2015 10:51:32 -0800 Subject: vm: add VM_FAULT_SIGSEGV handling support The core VM already knows about VM_FAULT_SIGBUS, but cannot return a "you should SIGSEGV" error, because the SIGSEGV case was generally handled by the caller - usually the architecture fault handler. That results in lots of duplication - all the architecture fault handlers end up doing very similar "look up vma, check permissions, do retries etc" - but it generally works. However, there are cases where the VM actually wants to SIGSEGV, and applications _expect_ SIGSEGV. In particular, when accessing the stack guard page, libsigsegv expects a SIGSEGV. And it usually got one, because the stack growth is handled by that duplicated architecture fault handler. However, when the generic VM layer started propagating the error return from the stack expansion in commit fee7e49d4514 ("mm: propagate error from stack expansion even for guard page"), that now exposed the existing VM_FAULT_SIGBUS result to user space. And user space really expected SIGSEGV, not SIGBUS. To fix that case, we need to add a VM_FAULT_SIGSEGV, and teach all those duplicate architecture fault handlers about it. They all already have the code to handle SIGSEGV, so it's about just tying that new return value to the existing code, but it's all a bit annoying. This is the mindless minimal patch to do this. A more extensive patch would be to try to gather up the mostly shared fault handling logic into one generic helper routine, and long-term we really should do that cleanup. Just from this patch, you can generally see that most architectures just copied (directly or indirectly) the old x86 way of doing things, but in the meantime that original x86 model has been improved to hold the VM semaphore for shorter times etc and to handle VM_FAULT_RETRY and other "newer" things, so it would be a good idea to bring all those improvements to the generic case and teach other architectures about them too. Reported-and-tested-by: Takashi Iwai Tested-by: Jan Engelhardt Acked-by: Heiko Carstens # "s390 still compiles and boots" Cc: linux-arch@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds --- include/linux/mm.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index 80fc92a49649..dd5ea3016fc4 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1070,6 +1070,7 @@ static inline int page_mapped(struct page *page) #define VM_FAULT_WRITE 0x0008 /* Special case for get_user_pages */ #define VM_FAULT_HWPOISON 0x0010 /* Hit poisoned small page */ #define VM_FAULT_HWPOISON_LARGE 0x0020 /* Hit poisoned large page. Index encoded in upper bits */ +#define VM_FAULT_SIGSEGV 0x0040 #define VM_FAULT_NOPAGE 0x0100 /* ->fault installed the pte, not return page */ #define VM_FAULT_LOCKED 0x0200 /* ->fault locked the returned page */ @@ -1078,8 +1079,9 @@ static inline int page_mapped(struct page *page) #define VM_FAULT_HWPOISON_LARGE_MASK 0xf000 /* encodes hpage index for large hwpoison */ -#define VM_FAULT_ERROR (VM_FAULT_OOM | VM_FAULT_SIGBUS | VM_FAULT_HWPOISON | \ - VM_FAULT_FALLBACK | VM_FAULT_HWPOISON_LARGE) +#define VM_FAULT_ERROR (VM_FAULT_OOM | VM_FAULT_SIGBUS | VM_FAULT_SIGSEGV | \ + VM_FAULT_HWPOISON | VM_FAULT_HWPOISON_LARGE | \ + VM_FAULT_FALLBACK) /* Encode hstate index for a hwpoisoned large page */ #define VM_FAULT_SET_HINDEX(x) ((x) << 12) -- cgit v1.2.3 From 00845eb968ead28007338b2bb852b8beef816583 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 1 Feb 2015 12:23:32 -0800 Subject: sched: don't cause task state changes in nested sleep debugging MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 8eb23b9f35aa ("sched: Debug nested sleeps") added code to report on nested sleep conditions, which we generally want to avoid because the inner sleeping operation can re-set the thread state to TASK_RUNNING, but that will then cause the outer sleep loop not actually sleep when it calls schedule. However, that's actually valid traditional behavior, with the inner sleep being some fairly rare case (like taking a sleeping lock that normally doesn't actually need to sleep). And the debug code would actually change the state of the task to TASK_RUNNING internally, which makes that kind of traditional and working code not work at all, because now the nested sleep doesn't just sometimes cause the outer one to not block, but will cause it to happen every time. In particular, it will cause the cardbus kernel daemon (pccardd) to basically busy-loop doing scheduling, converting a laptop into a heater, as reported by Bruno Prémont. But there may be other legacy uses of that nested sleep model in other drivers that are also likely to never get converted to the new model. This fixes both cases: - don't set TASK_RUNNING when the nested condition happens (note: even if WARN_ONCE() only _warns_ once, the return value isn't whether the warning happened, but whether the condition for the warning was true. So despite the warning only happening once, the "if (WARN_ON(..))" would trigger for every nested sleep. - in the cases where we knowingly disable the warning by using "sched_annotate_sleep()", don't change the task state (that is used for all core scheduling decisions), instead use '->task_state_change' that is used for the debugging decision itself. (Credit for the second part of the fix goes to Oleg Nesterov: "Can't we avoid this subtle change in behaviour DEBUG_ATOMIC_SLEEP adds?" with the suggested change to use 'task_state_change' as part of the test) Reported-and-bisected-by: Bruno Prémont Tested-by: Rafael J Wysocki Acked-by: Oleg Nesterov Cc: Peter Zijlstra Cc: Thomas Gleixner , Cc: Ilya Dryomov , Cc: Mike Galbraith Cc: Ingo Molnar Cc: Peter Hurley , Cc: Davidlohr Bueso , Signed-off-by: Linus Torvalds --- include/linux/kernel.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 5449d2f4a1ef..64ce58bee6f5 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -176,7 +176,7 @@ extern int _cond_resched(void); */ # define might_sleep() \ do { __might_sleep(__FILE__, __LINE__, 0); might_resched(); } while (0) -# define sched_annotate_sleep() __set_current_state(TASK_RUNNING) +# define sched_annotate_sleep() (current->task_state_change = 0) #else static inline void ___might_sleep(const char *file, int line, int preempt_offset) { } -- cgit v1.2.3