From f563d230903210acc2336af58e422216b68ded76 Mon Sep 17 00:00:00 2001 From: Andrzej Pietrasiewicz Date: Tue, 3 Mar 2015 10:52:23 +0100 Subject: usb: gadget: composite: add req_match method to usb_function Non-standard requests can encode the actual interface number in a non-standard way. For example composite_setup() assumes that it is w_index && 0xFF, but the printer function encodes the interface number in a context-dependet way (either w_index or w_index >> 8). This can lead to such requests being directed to wrong functions. This patch adds req_match() method to usb_function. Its purpose is to verify that a given request can be handled by a given function. If any function within a configuration provides the method and it returns true, then it is assumed that the right function is found. If a function uses req_match(), it should try as hard as possible to determine if the request is meant for it. If no functions in a configuration provide req_match or none of them returns true, then fall back to the usual approach. Signed-off-by: Andrzej Pietrasiewicz Signed-off-by: Felipe Balbi --- include/linux/usb/composite.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/usb') diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index 3d87defcc527..2511469a9904 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -148,6 +148,7 @@ struct usb_os_desc_table { * @disable: (REQUIRED) Indicates the function should be disabled. Reasons * include host resetting or reconfiguring the gadget, and disconnection. * @setup: Used for interface-specific control requests. + * @req_match: Tests if a given class request can be handled by this function. * @suspend: Notifies functions when the host stops sending USB traffic. * @resume: Notifies functions when the host restarts USB traffic. * @get_status: Returns function status as a reply to @@ -213,6 +214,8 @@ struct usb_function { void (*disable)(struct usb_function *); int (*setup)(struct usb_function *, const struct usb_ctrlrequest *); + bool (*req_match)(struct usb_function *, + const struct usb_ctrlrequest *); void (*suspend)(struct usb_function *); void (*resume)(struct usb_function *); -- cgit v1.2.3 From 06ed0de5188c9ef6553b2824b6cdd767ad46ece5 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Tue, 10 Mar 2015 22:37:46 +0900 Subject: usb: gadget: Fix typo fond in Documentation/Docbook/gadget.xml This patch fix some spelling typo found in gadget.xml. It is because this file is generated from comments in sources, I had to fix comments in the source, instead of xml file itself. Signed-off-by: Masanari Iida Signed-off-by: Felipe Balbi --- include/linux/usb/gadget.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux/usb') diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index e2f00fd8cd47..02476b3a1109 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -190,7 +190,7 @@ struct usb_ep { * @ep:the endpoint being configured * @maxpacket_limit:value of maximum packet size limit * - * This function shoud be used only in UDC drivers to initialize endpoint + * This function should be used only in UDC drivers to initialize endpoint * (usually in probe function). */ static inline void usb_ep_set_maxpacket_limit(struct usb_ep *ep, -- cgit v1.2.3 From ab330cf3888d8e0779fa05a243d53ba9f53a7ba9 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Thu, 12 Mar 2015 15:35:20 +0900 Subject: usb: renesas_usbhs: add support for USB-DMAC Some Renesas SoCs have the USB-DMAC. It is able to terminate transfers when a short packet is received, even if less bytes than the transfer counter size have been received. Also, it is able to send a short packet even if the packet size is not multiples of 8bytes. Since the previous code has used the interruption of USBHS controller when receiving packets even if this driver has used a dmac, a lot of interruptions has happened. This patch will reduce such interruptions. This patch allows to use the USB-DMAC on R-Car H2 and M2. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Felipe Balbi --- include/linux/usb/renesas_usbhs.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux/usb') diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h index 9fd9e481ea98..f06529c14141 100644 --- a/include/linux/usb/renesas_usbhs.h +++ b/include/linux/usb/renesas_usbhs.h @@ -165,6 +165,8 @@ struct renesas_usbhs_driver_param { */ u32 has_otg:1; /* for controlling PWEN/EXTLP */ u32 has_sudmac:1; /* for SUDMAC */ + u32 has_usb_dmac:1; /* for USB-DMAC */ +#define USBHS_USB_DMAC_XFER_SIZE 32 /* hardcode the xfer size */ }; #define USBHS_TYPE_R8A7790 1 -- cgit v1.2.3 From 46f5cace1cd0559c335dfd4a5b8f57456d1bd6a1 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Fri, 13 Mar 2015 11:09:42 -0700 Subject: usb: phy: msm: Remove dead code This code is no longer used now that mach-msm has been removed. Delete it. Cc: Felipe Balbi Cc: Greg Kroah-Hartman Cc: linux-usb@vger.kernel.org Cc: David Brown Cc: Bryan Huntsman Cc: Daniel Walker Signed-off-by: Stephen Boyd Signed-off-by: Felipe Balbi --- include/linux/usb/msm_hsusb.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/linux/usb') diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h index b0a39243295a..7dbecf9a4656 100644 --- a/include/linux/usb/msm_hsusb.h +++ b/include/linux/usb/msm_hsusb.h @@ -117,8 +117,6 @@ struct msm_otg_platform_data { enum otg_control_type otg_control; enum msm_usb_phy_type phy_type; void (*setup_gpio)(enum usb_otg_state state); - int (*link_clk_reset)(struct clk *link_clk, bool assert); - int (*phy_clk_reset)(struct clk *phy_clk); }; /** @@ -128,7 +126,6 @@ struct msm_otg_platform_data { * @irq: IRQ number assigned for HSUSB controller. * @clk: clock struct of usb_hs_clk. * @pclk: clock struct of usb_hs_pclk. - * @phy_reset_clk: clock struct of usb_phy_clk. * @core_clk: clock struct of usb_hs_core_clk. * @regs: ioremapped register base address. * @inputs: OTG state machine inputs(Id, SessValid etc). @@ -148,7 +145,6 @@ struct msm_otg { int irq; struct clk *clk; struct clk *pclk; - struct clk *phy_reset_clk; struct clk *core_clk; void __iomem *regs; #define ID 0 -- cgit v1.2.3 From 1f874edcb7318c5dd71025df9f3849715b4e4f71 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Wed, 11 Feb 2015 12:44:45 +0800 Subject: usb: chipidea: add runtime power management support Add runtime power management support. Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/chipidea.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/usb') diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index 535997a6681b..39ba00f0d1d5 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -19,6 +19,7 @@ struct ci_hdrc_platform_data { enum usb_phy_interface phy_mode; unsigned long flags; #define CI_HDRC_REGS_SHARED BIT(0) +#define CI_HDRC_SUPPORTS_RUNTIME_PM BIT(2) #define CI_HDRC_DISABLE_STREAMING BIT(3) /* * Only set it when DCCPARAMS.DC==1 and DCCPARAMS.HC==1, -- cgit v1.2.3 From 6adb9b7b5fb64be3c3e4d57578ea1446da91a8f9 Mon Sep 17 00:00:00 2001 From: Li Jun Date: Wed, 11 Feb 2015 12:45:01 +0800 Subject: usb: chipidea: add a flag for turn on vbus early for host Some usb PHYs need power supply from vbus to make it work, eg mxs-phy, if there is no vbus, USB PHY will not in correct state when the controller starts to work, for host, this requires vbus should be turned on before setting port power(PP) of ehci, to work with this kind of USB PHY design, this patch adds a flag CI_HDRC_TURN_VBUS_EARLY_ON, can be checked by host driver to turn on vbus while start host. Signed-off-by: Li Jun Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/chipidea.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/usb') diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index 39ba00f0d1d5..ab94f78c4dd1 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -28,6 +28,7 @@ struct ci_hdrc_platform_data { #define CI_HDRC_DUAL_ROLE_NOT_OTG BIT(4) #define CI_HDRC_IMX28_WRITE_FIX BIT(5) #define CI_HDRC_FORCE_FULLSPEED BIT(6) +#define CI_HDRC_TURN_VBUS_EARLY_ON BIT(7) enum usb_dr_mode dr_mode; #define CI_HDRC_CONTROLLER_RESET_EVENT 0 #define CI_HDRC_CONTROLLER_STOPPED_EVENT 1 -- cgit v1.2.3 From 32fc9eb5b2dcebefb7fb4c8288c739c320362524 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Fri, 13 Mar 2015 11:09:42 -0700 Subject: usb: phy: msm: Remove dead code This code is no longer used now that mach-msm has been removed. Delete it. Cc: Felipe Balbi Cc: Greg Kroah-Hartman Cc: linux-usb@vger.kernel.org Cc: David Brown Cc: Bryan Huntsman Cc: Daniel Walker Signed-off-by: Stephen Boyd Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/msm_hsusb.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/linux/usb') diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h index b0a39243295a..7dbecf9a4656 100644 --- a/include/linux/usb/msm_hsusb.h +++ b/include/linux/usb/msm_hsusb.h @@ -117,8 +117,6 @@ struct msm_otg_platform_data { enum otg_control_type otg_control; enum msm_usb_phy_type phy_type; void (*setup_gpio)(enum usb_otg_state state); - int (*link_clk_reset)(struct clk *link_clk, bool assert); - int (*phy_clk_reset)(struct clk *phy_clk); }; /** @@ -128,7 +126,6 @@ struct msm_otg_platform_data { * @irq: IRQ number assigned for HSUSB controller. * @clk: clock struct of usb_hs_clk. * @pclk: clock struct of usb_hs_pclk. - * @phy_reset_clk: clock struct of usb_phy_clk. * @core_clk: clock struct of usb_hs_core_clk. * @regs: ioremapped register base address. * @inputs: OTG state machine inputs(Id, SessValid etc). @@ -148,7 +145,6 @@ struct msm_otg { int irq; struct clk *clk; struct clk *pclk; - struct clk *phy_reset_clk; struct clk *core_clk; void __iomem *regs; #define ID 0 -- cgit v1.2.3 From dfea9c94837d27e38c8cc85a3c1c7c268973c3c2 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Fri, 6 Mar 2015 10:36:02 +0800 Subject: usb: udc: store usb_udc pointer in struct usb_gadget Instead of iterate to find usb_udc according to usb_gadget, this way is easier. Alan Stern suggests this way too: http://marc.info/?l=linux-usb&m=142168496528894&w=2 Acked-by: Alan Stern Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi --- include/linux/usb/gadget.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/usb') diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 02476b3a1109..242c694a5b85 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -474,6 +474,7 @@ struct usb_dcd_config_params { struct usb_gadget; struct usb_gadget_driver; +struct usb_udc; /* the rest of the api to the controller hardware: device operations, * which don't involve endpoints (or i/o). @@ -496,6 +497,7 @@ struct usb_gadget_ops { /** * struct usb_gadget - represents a usb slave device * @work: (internal use) Workqueue to be used for sysfs_notify() + * @udc: struct usb_udc pointer for this gadget * @ops: Function pointers used to access hardware-specific operations. * @ep0: Endpoint zero, used when reading or writing responses to * driver setup() requests @@ -545,6 +547,7 @@ struct usb_gadget_ops { */ struct usb_gadget { struct work_struct work; + struct usb_udc *udc; /* readonly to gadget driver */ const struct usb_gadget_ops *ops; struct usb_ep *ep0; -- cgit v1.2.3 From 628ef0d273a69d889669a459fb4675c678ae0418 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Fri, 6 Mar 2015 10:36:03 +0800 Subject: usb: udc: add usb_udc_vbus_handler This commit updates udc core vbus status, and try to connect or disconnect gadget. Signed-off-by: Peter Chen Acked-by: Alan Stern Signed-off-by: Felipe Balbi --- include/linux/usb/gadget.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux/usb') diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 242c694a5b85..4f3dfb7d0654 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -1032,6 +1032,10 @@ extern void usb_gadget_udc_reset(struct usb_gadget *gadget, extern void usb_gadget_giveback_request(struct usb_ep *ep, struct usb_request *req); +/*-------------------------------------------------------------------------*/ + +/* utility to update vbus status for udc core, it may be scheduled */ +extern void usb_udc_vbus_handler(struct usb_gadget *gadget, bool status); /*-------------------------------------------------------------------------*/ -- cgit v1.2.3 From 2f8a467a11aeec61f5077cd337b4efe74847e1d3 Mon Sep 17 00:00:00 2001 From: Li Jun Date: Fri, 20 Mar 2015 16:28:05 +0800 Subject: usb: otg-fsm: move 2 otg fsm timers definition to otg_fsm_timer B_DATA_PLS(data-line pulse time) and B_SSEND_SRP(session end to SRP init) are also from OTG&EH 2.0 Specification and they are not chipidea specific. Signed-off-by: Li Jun Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/otg-fsm.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux/usb') diff --git a/include/linux/usb/otg-fsm.h b/include/linux/usb/otg-fsm.h index b6ba1bfb86f2..f728f1854829 100644 --- a/include/linux/usb/otg-fsm.h +++ b/include/linux/usb/otg-fsm.h @@ -53,6 +53,8 @@ enum otg_fsm_timer { B_SE0_SRP, B_SRP_FAIL, A_WAIT_ENUM, + B_DATA_PLS, + B_SSEND_SRP, NUM_OTG_FSM_TIMERS, }; -- cgit v1.2.3 From 591fc116f3302da915bb57d4474a61a5e8884cec Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Thu, 9 Apr 2015 11:34:22 +0300 Subject: usb: phy: msm: Use extcon framework for VBUS and ID detection On recent Qualcomm platforms VBUS and ID lines are not routed to USB PHY LINK controller. Use extcon framework to receive connect and disconnect ID and VBUS notification. Signed-off-by: Ivan T. Ivanov Signed-off-by: Felipe Balbi --- include/linux/usb/msm_hsusb.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'include/linux/usb') diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h index 7dbecf9a4656..c4d956e50d09 100644 --- a/include/linux/usb/msm_hsusb.h +++ b/include/linux/usb/msm_hsusb.h @@ -18,6 +18,7 @@ #ifndef __ASM_ARCH_MSM_HSUSB_H #define __ASM_ARCH_MSM_HSUSB_H +#include #include #include #include @@ -119,6 +120,17 @@ struct msm_otg_platform_data { void (*setup_gpio)(enum usb_otg_state state); }; +/** + * struct msm_usb_cable - structure for exteternal connector cable + * state tracking + * @nb: hold event notification callback + * @conn: used for notification registration + */ +struct msm_usb_cable { + struct notifier_block nb; + struct extcon_specific_cable_nb conn; +}; + /** * struct msm_otg: OTG driver data. Shared by HCD and DCD. * @otg: USB OTG Transceiver structure. @@ -138,6 +150,8 @@ struct msm_otg_platform_data { * @chg_type: The type of charger attached. * @dcd_retires: The retry count used to track Data contact * detection process. + * @vbus: VBUS signal state trakining, using extcon framework + * @id: ID signal state trakining, using extcon framework */ struct msm_otg { struct usb_phy phy; @@ -166,6 +180,9 @@ struct msm_otg { struct reset_control *phy_rst; struct reset_control *link_rst; int vdd_levels[3]; + + struct msm_usb_cable vbus; + struct msm_usb_cable id; }; #endif -- cgit v1.2.3 From 44e42ae3a398b559c768b9b3c324d72b0b0b4479 Mon Sep 17 00:00:00 2001 From: "Ivan T. Ivanov" Date: Thu, 9 Apr 2015 11:34:33 +0300 Subject: usb: phy: msm: Manual PHY and LINK controller VBUS change notification VBUS is not routed to USB PHY on recent Qualcomm platforms. USB controller must see VBUS in order to pull-up DP when setting RS bit. Henc configure USB PHY and LINK registers sense VBUS and enable manual pullup on D+ line. Cc: Vamsi Krishna Cc: Mayank Rana Signed-off-by: Ivan T. Ivanov Signed-off-by: Felipe Balbi --- include/linux/usb/msm_hsusb.h | 5 +++++ include/linux/usb/msm_hsusb_hw.h | 9 +++++++++ 2 files changed, 14 insertions(+) (limited to 'include/linux/usb') diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h index c4d956e50d09..e55a1504266e 100644 --- a/include/linux/usb/msm_hsusb.h +++ b/include/linux/usb/msm_hsusb.h @@ -150,6 +150,9 @@ struct msm_usb_cable { * @chg_type: The type of charger attached. * @dcd_retires: The retry count used to track Data contact * detection process. + * @manual_pullup: true if VBUS is not routed to USB controller/phy + * and controller driver therefore enables pull-up explicitly before + * starting controller using usbcmd run/stop bit. * @vbus: VBUS signal state trakining, using extcon framework * @id: ID signal state trakining, using extcon framework */ @@ -181,6 +184,8 @@ struct msm_otg { struct reset_control *link_rst; int vdd_levels[3]; + bool manual_pullup; + struct msm_usb_cable vbus; struct msm_usb_cable id; }; diff --git a/include/linux/usb/msm_hsusb_hw.h b/include/linux/usb/msm_hsusb_hw.h index a29f6030afb1..e159b39f67a2 100644 --- a/include/linux/usb/msm_hsusb_hw.h +++ b/include/linux/usb/msm_hsusb_hw.h @@ -21,6 +21,8 @@ #define USB_AHBBURST (MSM_USB_BASE + 0x0090) #define USB_AHBMODE (MSM_USB_BASE + 0x0098) +#define USB_GENCONFIG_2 (MSM_USB_BASE + 0x00a0) + #define USB_CAPLENGTH (MSM_USB_BASE + 0x0100) /* 8 bit */ #define USB_USBCMD (MSM_USB_BASE + 0x0140) @@ -30,6 +32,9 @@ #define USB_PHY_CTRL (MSM_USB_BASE + 0x0240) #define USB_PHY_CTRL2 (MSM_USB_BASE + 0x0278) +#define GENCONFIG_2_SESS_VLD_CTRL_EN BIT(7) +#define USBCMD_SESS_VLD_CTRL BIT(25) + #define USBCMD_RESET 2 #define USB_USBINTR (MSM_USB_BASE + 0x0148) @@ -50,6 +55,10 @@ #define ULPI_PWR_CLK_MNG_REG 0x88 #define OTG_COMP_DISABLE BIT(0) +#define ULPI_MISC_A 0x96 +#define ULPI_MISC_A_VBUSVLDEXTSEL BIT(1) +#define ULPI_MISC_A_VBUSVLDEXT BIT(0) + #define ASYNC_INTR_CTRL (1 << 29) /* Enable async interrupt */ #define ULPI_STP_CTRL (1 << 30) /* Block communication with PHY */ #define PHY_RETEN (1 << 1) /* PHY retention enable/disable */ -- cgit v1.2.3 From 289fcff4bcdb1dcc0ce8788b7ea0f58a9e4a495f Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Wed, 13 May 2015 15:26:42 +0300 Subject: usb: add bus type for USB ULPI UTMI+ Low Pin Interface (ULPI) is a commonly used PHY interface for USB 2.0. The ULPI specification describes a standard set of registers which the vendors can extend for their specific needs. ULPI PHYs provide often functions such as charger detection and ADP sensing and probing. There are two major issues that the bus type is meant to tackle: Firstly, ULPI registers are accessed from the controller. The bus provides convenient method for the controller drivers to share that access with the actual PHY drivers. Secondly, there are already platforms that assume ULPI PHYs are runtime detected, such as many Intel Baytrail based platforms. They do not provide any kind of hardware description for the ULPI PHYs like separate ACPI device object that could be used to enumerate a device from. Signed-off-by: Heikki Krogerus Acked-by: David Cohen Signed-off-by: Felipe Balbi --- include/linux/usb/ulpi.h | 134 +---------------------------------------------- 1 file changed, 2 insertions(+), 132 deletions(-) (limited to 'include/linux/usb') diff --git a/include/linux/usb/ulpi.h b/include/linux/usb/ulpi.h index 5c295c26ad37..5f07407a367a 100644 --- a/include/linux/usb/ulpi.h +++ b/include/linux/usb/ulpi.h @@ -12,6 +12,8 @@ #define __LINUX_USB_ULPI_H #include +#include + /*-------------------------------------------------------------------------*/ /* @@ -49,138 +51,6 @@ /*-------------------------------------------------------------------------*/ -/* - * Macros for Set and Clear - * See ULPI 1.1 specification to find the registers with Set and Clear offsets - */ -#define ULPI_SET(a) (a + 1) -#define ULPI_CLR(a) (a + 2) - -/*-------------------------------------------------------------------------*/ - -/* - * Register Map - */ -#define ULPI_VENDOR_ID_LOW 0x00 -#define ULPI_VENDOR_ID_HIGH 0x01 -#define ULPI_PRODUCT_ID_LOW 0x02 -#define ULPI_PRODUCT_ID_HIGH 0x03 -#define ULPI_FUNC_CTRL 0x04 -#define ULPI_IFC_CTRL 0x07 -#define ULPI_OTG_CTRL 0x0a -#define ULPI_USB_INT_EN_RISE 0x0d -#define ULPI_USB_INT_EN_FALL 0x10 -#define ULPI_USB_INT_STS 0x13 -#define ULPI_USB_INT_LATCH 0x14 -#define ULPI_DEBUG 0x15 -#define ULPI_SCRATCH 0x16 -/* Optional Carkit Registers */ -#define ULPI_CARCIT_CTRL 0x19 -#define ULPI_CARCIT_INT_DELAY 0x1c -#define ULPI_CARCIT_INT_EN 0x1d -#define ULPI_CARCIT_INT_STS 0x20 -#define ULPI_CARCIT_INT_LATCH 0x21 -#define ULPI_CARCIT_PLS_CTRL 0x22 -/* Other Optional Registers */ -#define ULPI_TX_POS_WIDTH 0x25 -#define ULPI_TX_NEG_WIDTH 0x26 -#define ULPI_POLARITY_RECOVERY 0x27 -/* Access Extended Register Set */ -#define ULPI_ACCESS_EXTENDED 0x2f -/* Vendor Specific */ -#define ULPI_VENDOR_SPECIFIC 0x30 -/* Extended Registers */ -#define ULPI_EXT_VENDOR_SPECIFIC 0x80 - -/*-------------------------------------------------------------------------*/ - -/* - * Register Bits - */ - -/* Function Control */ -#define ULPI_FUNC_CTRL_XCVRSEL (1 << 0) -#define ULPI_FUNC_CTRL_XCVRSEL_MASK (3 << 0) -#define ULPI_FUNC_CTRL_HIGH_SPEED (0 << 0) -#define ULPI_FUNC_CTRL_FULL_SPEED (1 << 0) -#define ULPI_FUNC_CTRL_LOW_SPEED (2 << 0) -#define ULPI_FUNC_CTRL_FS4LS (3 << 0) -#define ULPI_FUNC_CTRL_TERMSELECT (1 << 2) -#define ULPI_FUNC_CTRL_OPMODE (1 << 3) -#define ULPI_FUNC_CTRL_OPMODE_MASK (3 << 3) -#define ULPI_FUNC_CTRL_OPMODE_NORMAL (0 << 3) -#define ULPI_FUNC_CTRL_OPMODE_NONDRIVING (1 << 3) -#define ULPI_FUNC_CTRL_OPMODE_DISABLE_NRZI (2 << 3) -#define ULPI_FUNC_CTRL_OPMODE_NOSYNC_NOEOP (3 << 3) -#define ULPI_FUNC_CTRL_RESET (1 << 5) -#define ULPI_FUNC_CTRL_SUSPENDM (1 << 6) - -/* Interface Control */ -#define ULPI_IFC_CTRL_6_PIN_SERIAL_MODE (1 << 0) -#define ULPI_IFC_CTRL_3_PIN_SERIAL_MODE (1 << 1) -#define ULPI_IFC_CTRL_CARKITMODE (1 << 2) -#define ULPI_IFC_CTRL_CLOCKSUSPENDM (1 << 3) -#define ULPI_IFC_CTRL_AUTORESUME (1 << 4) -#define ULPI_IFC_CTRL_EXTERNAL_VBUS (1 << 5) -#define ULPI_IFC_CTRL_PASSTHRU (1 << 6) -#define ULPI_IFC_CTRL_PROTECT_IFC_DISABLE (1 << 7) - -/* OTG Control */ -#define ULPI_OTG_CTRL_ID_PULLUP (1 << 0) -#define ULPI_OTG_CTRL_DP_PULLDOWN (1 << 1) -#define ULPI_OTG_CTRL_DM_PULLDOWN (1 << 2) -#define ULPI_OTG_CTRL_DISCHRGVBUS (1 << 3) -#define ULPI_OTG_CTRL_CHRGVBUS (1 << 4) -#define ULPI_OTG_CTRL_DRVVBUS (1 << 5) -#define ULPI_OTG_CTRL_DRVVBUS_EXT (1 << 6) -#define ULPI_OTG_CTRL_EXTVBUSIND (1 << 7) - -/* USB Interrupt Enable Rising, - * USB Interrupt Enable Falling, - * USB Interrupt Status and - * USB Interrupt Latch - */ -#define ULPI_INT_HOST_DISCONNECT (1 << 0) -#define ULPI_INT_VBUS_VALID (1 << 1) -#define ULPI_INT_SESS_VALID (1 << 2) -#define ULPI_INT_SESS_END (1 << 3) -#define ULPI_INT_IDGRD (1 << 4) - -/* Debug */ -#define ULPI_DEBUG_LINESTATE0 (1 << 0) -#define ULPI_DEBUG_LINESTATE1 (1 << 1) - -/* Carkit Control */ -#define ULPI_CARKIT_CTRL_CARKITPWR (1 << 0) -#define ULPI_CARKIT_CTRL_IDGNDDRV (1 << 1) -#define ULPI_CARKIT_CTRL_TXDEN (1 << 2) -#define ULPI_CARKIT_CTRL_RXDEN (1 << 3) -#define ULPI_CARKIT_CTRL_SPKLEFTEN (1 << 4) -#define ULPI_CARKIT_CTRL_SPKRIGHTEN (1 << 5) -#define ULPI_CARKIT_CTRL_MICEN (1 << 6) - -/* Carkit Interrupt Enable */ -#define ULPI_CARKIT_INT_EN_IDFLOAT_RISE (1 << 0) -#define ULPI_CARKIT_INT_EN_IDFLOAT_FALL (1 << 1) -#define ULPI_CARKIT_INT_EN_CARINTDET (1 << 2) -#define ULPI_CARKIT_INT_EN_DP_RISE (1 << 3) -#define ULPI_CARKIT_INT_EN_DP_FALL (1 << 4) - -/* Carkit Interrupt Status and - * Carkit Interrupt Latch - */ -#define ULPI_CARKIT_INT_IDFLOAT (1 << 0) -#define ULPI_CARKIT_INT_CARINTDET (1 << 1) -#define ULPI_CARKIT_INT_DP (1 << 2) - -/* Carkit Pulse Control*/ -#define ULPI_CARKIT_PLS_CTRL_TXPLSEN (1 << 0) -#define ULPI_CARKIT_PLS_CTRL_RXPLSEN (1 << 1) -#define ULPI_CARKIT_PLS_CTRL_SPKRLEFT_BIASEN (1 << 2) -#define ULPI_CARKIT_PLS_CTRL_SPKRRIGHT_BIASEN (1 << 3) - -/*-------------------------------------------------------------------------*/ - #if IS_ENABLED(CONFIG_USB_ULPI) struct usb_phy *otg_ulpi_create(struct usb_phy_io_ops *ops, unsigned int flags); -- cgit v1.2.3 From e0213bc5467ca5fe44ab04527f0e47998f30c046 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 18 May 2015 20:04:14 +0900 Subject: usb: renesas_usbhs: Change USBHS_TYPE_R8A779x to USBHS_TYPE_RCAR_GEN2 Since the HSUSB controllers of R-Car Gen2 are the same specification (they have 16 pipes and usb-dmac), this patch changes USBHS_TYPE_R8A7790 and USBHS_TYPE_R8A7791 to USBHS_TYPE_RCAR_GEN2. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Felipe Balbi --- include/linux/usb/renesas_usbhs.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux/usb') diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h index f06529c14141..3dd5a781da99 100644 --- a/include/linux/usb/renesas_usbhs.h +++ b/include/linux/usb/renesas_usbhs.h @@ -169,8 +169,7 @@ struct renesas_usbhs_driver_param { #define USBHS_USB_DMAC_XFER_SIZE 32 /* hardcode the xfer size */ }; -#define USBHS_TYPE_R8A7790 1 -#define USBHS_TYPE_R8A7791 2 +#define USBHS_TYPE_RCAR_GEN2 1 /* * option: -- cgit v1.2.3 From a09e23f53e2c14a65a3b14a00060fea163081e1f Mon Sep 17 00:00:00 2001 From: Mian Yousaf Kaukab Date: Sat, 16 May 2015 22:33:35 +0200 Subject: usb: gadget: net2280: check interrupts for all endpoints USB3380 in enhanced mode has 4 IN and 4 OUT endpoints. Check interrupts for all of them. Tested-by: Ricardo Ribalda Delgado Signed-off-by: Mian Yousaf Kaukab Signed-off-by: Felipe Balbi --- include/linux/usb/net2280.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/usb') diff --git a/include/linux/usb/net2280.h b/include/linux/usb/net2280.h index 148b8fa5b1a2..725120224472 100644 --- a/include/linux/usb/net2280.h +++ b/include/linux/usb/net2280.h @@ -168,6 +168,9 @@ struct net2280_regs { #define ENDPOINT_B_INTERRUPT 2 #define ENDPOINT_A_INTERRUPT 1 #define ENDPOINT_0_INTERRUPT 0 +#define USB3380_IRQSTAT0_EP_INTR_MASK_IN (0xF << 17) +#define USB3380_IRQSTAT0_EP_INTR_MASK_OUT (0xF << 1) + u32 irqstat1; #define POWER_STATE_CHANGE_INTERRUPT 27 #define PCI_ARBITER_TIMEOUT_INTERRUPT 26 -- cgit v1.2.3 From c65c4f052bc3b67989bf54914798513685c54988 Mon Sep 17 00:00:00 2001 From: Mian Yousaf Kaukab Date: Sat, 16 May 2015 22:33:36 +0200 Subject: usb: gadget: net2280: fix use of GPEP in both directions USB3380 enhanced mode allows GPEP to be used in both IN and OUT directions. However, IN and OUT endpoints must use same USB endpoint address (bEndpointAddress). Fix this by setting the ep_cfg.ep_number during initialization and keep it in net2280_enable() Tested-by: Ricardo Ribalda Delgado Signed-off-by: Mian Yousaf Kaukab Signed-off-by: Felipe Balbi --- include/linux/usb/usb338x.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux/usb') diff --git a/include/linux/usb/usb338x.h b/include/linux/usb/usb338x.h index f92eb635b9d3..11525d8d89a7 100644 --- a/include/linux/usb/usb338x.h +++ b/include/linux/usb/usb338x.h @@ -43,6 +43,10 @@ #define IN_ENDPOINT_TYPE 12 #define OUT_ENDPOINT_ENABLE 10 #define OUT_ENDPOINT_TYPE 8 +#define USB3380_EP_CFG_MASK_IN ((0x3 << IN_ENDPOINT_TYPE) | \ + BIT(IN_ENDPOINT_ENABLE)) +#define USB3380_EP_CFG_MASK_OUT ((0x3 << OUT_ENDPOINT_TYPE) | \ + BIT(OUT_ENDPOINT_ENABLE)) struct usb338x_usb_ext_regs { u32 usbclass; -- cgit v1.2.3 From e842b84c8e7221c45c8dbd7de09185c6149e1cf9 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Mon, 23 Mar 2015 09:52:48 +1100 Subject: usb: phy: Add interface to get phy give of device_node. Split the "get phy from device_node" functionality out of "get phy by phandle" so it can be used directly. This is useful when a battery-charger is intimately associated with a particular phy but handled by a separate driver. The charger can find the device_node based on sibling relationships without the need for a redundant declaration in the devicetree description. As a peripheral that gets a phy will often want to register a notifier block, and de-register it later, that functionality is included so the de-registration is automatic. Acked-by: Pavel Machek Signed-off-by: NeilBrown Signed-off-by: Felipe Balbi --- include/linux/usb/phy.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux/usb') diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h index bc91b5d380fd..8ed1e29ef329 100644 --- a/include/linux/usb/phy.h +++ b/include/linux/usb/phy.h @@ -205,6 +205,8 @@ extern struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index); extern struct usb_phy *devm_usb_get_phy_dev(struct device *dev, u8 index); extern struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev, const char *phandle, u8 index); +extern struct usb_phy *devm_usb_get_phy_by_node(struct device *dev, + struct device_node *node, struct notifier_block *nb); extern void usb_put_phy(struct usb_phy *); extern void devm_usb_put_phy(struct device *dev, struct usb_phy *x); extern int usb_bind_phy(const char *dev_name, u8 index, -- cgit v1.2.3 From 307c858bc245da5229b30186546590e1d472fc8f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 28 May 2015 16:08:02 +0200 Subject: usb: phy: add static inline wrapper for devm_usb_get_phy_by_node The newly introduced devm_usb_get_phy_by_node function only has an extern declaration, but no alternative for the case that CONFIG_USB_PHY is disabled, which leads to a build error when it is used anyway: drivers/power/twl4030_charger.c: In function 'twl4030_bci_probe': drivers/power/twl4030_charger.c:648:23: error: implicit declaration of function 'devm_usb_get_phy_by_node' [-Werror=implicit-function-declaration] bci->transceiver = devm_usb_get_phy_by_node( This adds the wrapper in the same way that we have one for all other usb-phy API functions. Signed-off-by: Arnd Bergmann Fixes: e842b84c8e7 ("usb: phy: Add interface to get phy give of device_node.") Signed-off-by: Felipe Balbi --- include/linux/usb/phy.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux/usb') diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h index 8ed1e29ef329..e39f251cf861 100644 --- a/include/linux/usb/phy.h +++ b/include/linux/usb/phy.h @@ -240,6 +240,12 @@ static inline struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev, return ERR_PTR(-ENXIO); } +static inline struct usb_phy *devm_usb_get_phy_by_node(struct device *dev, + struct device_node *node, struct notifier_block *nb) +{ + return ERR_PTR(-ENXIO); +} + static inline void usb_put_phy(struct usb_phy *x) { } -- cgit v1.2.3 From f0e6a326deec8b51ee12f82a34057efd3d0979b8 Mon Sep 17 00:00:00 2001 From: Abhishek Bist Date: Wed, 27 May 2015 23:54:19 +0530 Subject: USB: hcd.h : Removed an unnecessary function prototype usb_find_interface_driver() This function is used to call in early version of linux kernel in order to find out the interface used by a usb device. But now it's use is completely abolished. So,it would be relevant to remove this obselete function from kernel mainline. Signed-off-by: Abhishek Bist Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/hcd.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux/usb') diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 68b1e836dff1..c9aa7792de10 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -622,8 +622,6 @@ extern struct list_head usb_bus_list; extern struct mutex usb_bus_list_lock; extern wait_queue_head_t usb_kill_urb_queue; -extern int usb_find_interface_driver(struct usb_device *dev, - struct usb_interface *interface); #define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN)) -- cgit v1.2.3 From 4a0e3e989d66bb7204b163d9cfaa7fa96d0f2023 Mon Sep 17 00:00:00 2001 From: Enrico Mioso Date: Wed, 8 Jul 2015 13:05:57 +0200 Subject: cdc_ncm: Add support for moving NDP to end of NCM frame NCM specs are not actually mandating a specific position in the frame for the NDP (Network Datagram Pointer). However, some Huawei devices will ignore our aggregates if it is not placed after the datagrams it points to. Add support for doing just this, in a per-device configurable way. While at it, update NCM subdrivers, disabling this functionality in all of them, except in huawei_cdc_ncm where it is enabled instead. We aren't making any distinction between different Huawei NCM devices, based on what the vendor driver does. Standard NCM devices are left unaffected: if they are compliant, they should be always usable, still stay on the safe side. This change has been tested and working with a Huawei E3131 device (which works regardless of NDP position), a Huawei E3531 (also working both ways) and an E3372 (which mandates NDP to be after indexed datagrams). V1->V2: - corrected wrong NDP acronym definition - fixed possible NULL pointer dereference - patch cleanup V2->V3: - Properly account for the NDP size when writing new packets to SKB Signed-off-by: Enrico Mioso Signed-off-by: David S. Miller --- include/linux/usb/cdc_ncm.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'include/linux/usb') diff --git a/include/linux/usb/cdc_ncm.h b/include/linux/usb/cdc_ncm.h index 7c9b484735c5..1f6526c76ee8 100644 --- a/include/linux/usb/cdc_ncm.h +++ b/include/linux/usb/cdc_ncm.h @@ -80,6 +80,9 @@ #define CDC_NCM_TIMER_INTERVAL_MIN 5UL #define CDC_NCM_TIMER_INTERVAL_MAX (U32_MAX / NSEC_PER_USEC) +/* Driver flags */ +#define CDC_NCM_FLAG_NDP_TO_END 0x02 /* NDP is placed at end of frame */ + #define cdc_ncm_comm_intf_is_mbim(x) ((x)->desc.bInterfaceSubClass == USB_CDC_SUBCLASS_MBIM && \ (x)->desc.bInterfaceProtocol == USB_CDC_PROTO_NONE) #define cdc_ncm_data_intf_is_mbim(x) ((x)->desc.bInterfaceProtocol == USB_CDC_MBIM_PROTO_NTB) @@ -103,9 +106,11 @@ struct cdc_ncm_ctx { spinlock_t mtx; atomic_t stop; + int drvflags; u32 timer_interval; u32 max_ndp_size; + struct usb_cdc_ncm_ndp16 *delayed_ndp16; u32 tx_timer_pending; u32 tx_curr_frame_num; @@ -133,7 +138,7 @@ struct cdc_ncm_ctx { }; u8 cdc_ncm_select_altsetting(struct usb_interface *intf); -int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting); +int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting, int drvflags); void cdc_ncm_unbind(struct usbnet *dev, struct usb_interface *intf); struct sk_buff *cdc_ncm_fill_tx_frame(struct usbnet *dev, struct sk_buff *skb, __le32 sign); int cdc_ncm_rx_verify_nth16(struct cdc_ncm_ctx *ctx, struct sk_buff *skb_in); -- cgit v1.2.3