From 93e3d58284626ff6466f9c3dac8800cd6f8079c6 Mon Sep 17 00:00:00 2001 From: John Villalovos Date: Tue, 20 Jul 2010 15:26:46 -0700 Subject: serial: fix missing bit coverage of ASYNC_FLAGS It seems that currently ASYNC_FLAGS is one bit short of covering all the bits of the ASYNC user flags. In particular it does not cover the ASYNC_AUTOPROBE bit. ASYNCB_LAST_USER and ASYNCB_AUTOPROBE are both equal to 15. Therefore: ASYNC_AUTOPROBE = 1000 0000 0000 0000 ASYNC_FLAGS = 0111 1111 1111 1111 So ASYNC_FLAGS is not covering the ASYNC_AUTOPROBE bit. This patch fixes the issue and with the patch the values will be: ASYNC_AUTOPROBE = 1000 0000 0000 0000 ASYNC_FLAGS = 1111 1111 1111 1111 As a side note, doing a "git grep" I didn't find any use of ASYNC_AUTOPROBE or ASYNCB_AUTOPROBE in the kernel, besides this include file. Signed-off-by: John Villalovos Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- include/linux/serial.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux/serial.h') diff --git a/include/linux/serial.h b/include/linux/serial.h index c8613c3ff9d3..c3b45add494d 100644 --- a/include/linux/serial.h +++ b/include/linux/serial.h @@ -151,7 +151,7 @@ struct serial_uart_config { #define ASYNC_BUGGY_UART (1U << ASYNCB_BUGGY_UART) #define ASYNC_AUTOPROBE (1U << ASYNCB_AUTOPROBE) -#define ASYNC_FLAGS ((1U << ASYNCB_LAST_USER) - 1) +#define ASYNC_FLAGS ((1U << (ASYNCB_LAST_USER + 1)) - 1) #define ASYNC_USR_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI| \ ASYNC_CALLOUT_NOHUP|ASYNC_SPD_SHI|ASYNC_LOW_LATENCY) #define ASYNC_SPD_CUST (ASYNC_SPD_HI|ASYNC_SPD_VHI) -- cgit v1.2.3 From 1b6331848b69d1ed165a6bdc75c4046d68767563 Mon Sep 17 00:00:00 2001 From: Claudio Scordino Date: Tue, 20 Jul 2010 15:26:47 -0700 Subject: serial: general fixes in the serial_rs485 structure Fix several issues related to the RS485 interface: - It adds the flag SER_RS485_RTS_BEFORE_SEND that was missing from the serial_rs485 structure (even if "delay_rts_before_send" was existing) - It adds a further "delay_rts_after_send" field for those drivers that can have a delay after send (e.g., atmel_serial) - It fixes the usage of the structure in the atmel_serial driver (where "delay_rts_before_send" should be used instead of "delay_rts_after_send"). Signed-off-by: Claudio Scordino Signed-off-by: Bernhard Roth Cc: Philippe De Muyter Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- include/linux/serial.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux/serial.h') diff --git a/include/linux/serial.h b/include/linux/serial.h index c3b45add494d..ef914061511e 100644 --- a/include/linux/serial.h +++ b/include/linux/serial.h @@ -210,8 +210,10 @@ struct serial_rs485 { #define SER_RS485_ENABLED (1 << 0) #define SER_RS485_RTS_ON_SEND (1 << 1) #define SER_RS485_RTS_AFTER_SEND (1 << 2) +#define SER_RS485_RTS_BEFORE_SEND (1 << 3) __u32 delay_rts_before_send; /* Milliseconds */ - __u32 padding[6]; /* Memory is cheap, new structs + __u32 delay_rts_after_send; /* Milliseconds */ + __u32 padding[5]; /* Memory is cheap, new structs are a royal PITA .. */ }; -- cgit v1.2.3 From 235dae5d094c415fcf0fc79fa637f1901bc8afe2 Mon Sep 17 00:00:00 2001 From: Philippe Langlais Date: Thu, 29 Jul 2010 17:13:57 +0200 Subject: U6715 16550A serial driver support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit UART Features extract from STEricsson U6715 data-sheet (arm926 SoC for mobile phone): * Fully compatible with industry standard 16C550 and 16C450 from various manufacturers * RX and TX 64 byte FIFO reduces CPU interrupts * Full double buffering * Modem control signals include CTS, RTS, (and DSR, DTR on UART1 only) * Automatic baud rate selection * Manual or automatic RTS/CTS smart hardware flow control * Programmable serial characteristics: – Baud rate generation (50 to 3.25M baud) – 5, 6, 7 or 8-bit characters – Even, odd or no-parity bit generation and detection – 1, 1.5 or 2 stop bit generation * Independent control of transmit, receive, line status, data set interrupts and FIFOs * Full status-reporting capabilities * Separate DMA signaling for RX and TX * Timed interrupt to spread receive interrupt on known duration * DMA time-out interrupt to allow detection of end of reception * Carkit pulse coding and decoding compliant with USB carkit control interface [40] In 16550A auto-configuration, if the fifo size is 64 then it's an U6 16550A port Add set_termios hook & export serial8250_do_set_termios to change uart clock following baudrate Signed-off-by: Philippe Langlais Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/serial.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux/serial.h') diff --git a/include/linux/serial.h b/include/linux/serial.h index ef914061511e..1ebc694a6d52 100644 --- a/include/linux/serial.h +++ b/include/linux/serial.h @@ -77,7 +77,8 @@ struct serial_struct { #define PORT_16654 11 #define PORT_16850 12 #define PORT_RSA 13 /* RSA-DV II/S card */ -#define PORT_MAX 13 +#define PORT_U6_16550A 14 +#define PORT_MAX 14 #define SERIAL_IO_PORT 0 #define SERIAL_IO_HUB6 1 -- cgit v1.2.3