From d71e600836aa5597837970cb754057b2b884035c Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 7 Dec 2011 15:57:10 +0200 Subject: include: platform_data: Platform data header for OMAP4 ASoC audio Include file to be used with the upcoming ASoC machine driver for OMAP platform using ABE with twl6040 codec. Signed-off-by: Peter Ujfalusi Acked-by: Mark Brown --- include/linux/platform_data/omap-abe-twl6040.h | 49 ++++++++++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 include/linux/platform_data/omap-abe-twl6040.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/omap-abe-twl6040.h b/include/linux/platform_data/omap-abe-twl6040.h new file mode 100644 index 000000000000..5d298ac10fc2 --- /dev/null +++ b/include/linux/platform_data/omap-abe-twl6040.h @@ -0,0 +1,49 @@ +/** + * omap-abe-twl6040.h - ASoC machine driver OMAP4+ devices, header. + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com + * All rights reserved. + * + * Author: Peter Ujfalusi + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef _OMAP_ABE_TWL6040_H_ +#define _OMAP_ABE_TWL6040_H_ + +/* To select if only one channel is connected in a stereo port */ +#define ABE_TWL6040_LEFT (1 << 0) +#define ABE_TWL6040_RIGHT (1 << 1) + +struct omap_abe_twl6040_data { + char *card_name; + /* Feature flags for connected audio pins */ + u8 has_hs; + u8 has_hf; + bool has_ep; + u8 has_aux; + u8 has_vibra; + bool has_dmic; + bool has_hsmic; + bool has_mainmic; + bool has_submic; + u8 has_afm; + /* Other features */ + bool jack_detection; /* board can detect jack events */ + int mclk_freq; /* MCLK frequency speed for twl6040 */ +}; + +#endif /* _OMAP_ABE_TWL6040_H_ */ -- cgit v1.2.3 From 3afbd89c9639c344300dcdd7d4e5e18dda559fd4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Wed, 25 Jan 2012 09:05:04 +0100 Subject: serial/efm32: add new driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Uwe Kleine-König Signed-off-by: Greg Kroah-Hartman --- include/linux/platform_data/efm32-uart.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 include/linux/platform_data/efm32-uart.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/efm32-uart.h b/include/linux/platform_data/efm32-uart.h new file mode 100644 index 000000000000..ed0e975b3c54 --- /dev/null +++ b/include/linux/platform_data/efm32-uart.h @@ -0,0 +1,18 @@ +/* + * + * + */ +#ifndef __LINUX_PLATFORM_DATA_EFM32_UART_H__ +#define __LINUX_PLATFORM_DATA_EFM32_UART_H__ + +#include + +/** + * struct efm32_uart_pdata + * @location: pinmux location for the I/O pins (to be written to the ROUTE + * register) + */ +struct efm32_uart_pdata { + u8 location; +}; +#endif /* ifndef __LINUX_PLATFORM_DATA_EFM32_UART_H__ */ -- cgit v1.2.3 From 17711dbf4788ded84470941ff63a7029f73ca654 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sun, 16 Oct 2011 16:54:51 -0700 Subject: ARM: tegra: emc: convert tegra2_emc to a platform driver This is the first step in making it device-tree aware and get rid of the in-kernel EMC tables (of which there are none in mainline, thankfully). Changes since v3: * moved to devm_request_and_ioremap() in probe() Changes since v2: * D'oh -- missed a couple of variables that were added, never used and then later removed in a later patch. Changes since v1: * Fixed messed up indentation * Removed code that should be gone (was added here and removed later in series) Signed-off-by: Olof Johansson Acked-by: Stephen Warren --- include/linux/platform_data/tegra_emc.h | 34 +++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 include/linux/platform_data/tegra_emc.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/tegra_emc.h b/include/linux/platform_data/tegra_emc.h new file mode 100644 index 000000000000..df67505e98f8 --- /dev/null +++ b/include/linux/platform_data/tegra_emc.h @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2011 Google, Inc. + * + * Author: + * Colin Cross + * Olof Johansson + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __TEGRA_EMC_H_ +#define __TEGRA_EMC_H_ + +#define TEGRA_EMC_NUM_REGS 46 + +struct tegra_emc_table { + unsigned long rate; + u32 regs[TEGRA_EMC_NUM_REGS]; +}; + +struct tegra_emc_pdata { + int num_tables; + struct tegra_emc_table *tables; +}; + +#endif -- cgit v1.2.3 From d28a9689c93195d39f91f35a9519876688605b65 Mon Sep 17 00:00:00 2001 From: Anton Tikhomirov Date: Wed, 15 Feb 2012 17:04:56 +0900 Subject: usb: dwc3: Add Exynos Specific Glue layer Adds Exynos Specific Glue layer to support USB peripherals on Samsung Exynos5 chips. [ balbi@ti.com : prevent compilation of Exynos glue layer on platforms which don't provide clk API implementation ] Signed-off-by: Anton Tikhomirov Signed-off-by: Felipe Balbi --- include/linux/platform_data/dwc3-exynos.h | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 include/linux/platform_data/dwc3-exynos.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/dwc3-exynos.h b/include/linux/platform_data/dwc3-exynos.h new file mode 100644 index 000000000000..5eb7da9b3772 --- /dev/null +++ b/include/linux/platform_data/dwc3-exynos.h @@ -0,0 +1,24 @@ +/** + * dwc3-exynos.h - Samsung EXYNOS DWC3 Specific Glue layer, header. + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Anton Tikhomirov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _DWC3_EXYNOS_H_ +#define _DWC3_EXYNOS_H_ + +struct dwc3_exynos_data { + int phy_type; + int (*phy_init)(struct platform_device *pdev, int type); + int (*phy_exit)(struct platform_device *pdev, int type); +}; + +#endif /* _DWC3_EXYNOS_H_ */ -- cgit v1.2.3 From bf4289cba02b8cf770ecd7959ca70839f0dd9d3c Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 29 Dec 2011 14:43:24 +0800 Subject: ATMEL: fix nand ecc support So we can now choose for the board the ecc mode (ecc soft, soft bch, no ecc and hardware). Set ecc mode in the boards to soft as currently in the driver. Move platform data to a common header include/linux/platform_data/atmel_nand.h Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Hans-Christian Egtvedt Acked-by: David Woodhouse --- include/linux/platform_data/atmel.h | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 include/linux/platform_data/atmel.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h new file mode 100644 index 000000000000..7b8a445f2b41 --- /dev/null +++ b/include/linux/platform_data/atmel.h @@ -0,0 +1,26 @@ +/* + * atmel platform data + * + * GPL v2 Only + */ + +#ifndef __ATMEL_NAND_H__ +#define __ATMEL_NAND_H__ + +#include + + /* NAND / SmartMedia */ +struct atmel_nand_data { + int enable_pin; /* chip enable */ + int det_pin; /* card detect */ + int rdy_pin; /* ready/busy */ + u8 rdy_pin_active_low; /* rdy_pin value is inverted */ + u8 ale; /* address line number connected to ALE */ + u8 cle; /* address line number connected to CLE */ + u8 bus_width_16; /* buswidth is 16 bit */ + u8 ecc_mode; /* ecc mode */ + struct mtd_partition *parts; + unsigned int num_parts; +}; + +#endif /* __ATMEL_NAND_H__ */ -- cgit v1.2.3 From 3dcb7ea137c882580d4d421077e9097ef099a3a9 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 29 Dec 2011 14:59:54 +0800 Subject: mtd/atmel_nand: add on_flash_bbt to enable the use of On Flash BBT This will allow to enable it from the board. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: David Woodhouse --- include/linux/platform_data/atmel.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h index 7b8a445f2b41..d056263545b1 100644 --- a/include/linux/platform_data/atmel.h +++ b/include/linux/platform_data/atmel.h @@ -19,6 +19,7 @@ struct atmel_nand_data { u8 cle; /* address line number connected to CLE */ u8 bus_width_16; /* buswidth is 16 bit */ u8 ecc_mode; /* ecc mode */ + u8 on_flash_bbt; /* bbt on flash */ struct mtd_partition *parts; unsigned int num_parts; }; -- cgit v1.2.3 From 0f1142a514e101076bc01de2f93b242693d0f16f Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Fri, 16 Mar 2012 22:47:48 -0700 Subject: Input: omap4-keypad - move platform_data to This patch allows us to drop the OMAP dependency from the OMAP4 keypad driver. Signed-off-by: Felipe Balbi Signed-off-by: Sourav Poddar Signed-off-by: Dmitry Torokhov --- include/linux/platform_data/omap4-keypad.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) create mode 100644 include/linux/platform_data/omap4-keypad.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/omap4-keypad.h b/include/linux/platform_data/omap4-keypad.h new file mode 100644 index 000000000000..4eef5fb05a17 --- /dev/null +++ b/include/linux/platform_data/omap4-keypad.h @@ -0,0 +1,13 @@ +#ifndef __LINUX_INPUT_OMAP4_KEYPAD_H +#define __LINUX_INPUT_OMAP4_KEYPAD_H + +#include + +struct omap4_keypad_platform_data { + const struct matrix_keymap_data *keymap_data; + + u8 rows; + u8 cols; +}; + +#endif /* __LINUX_INPUT_OMAP4_KEYPAD_H */ -- cgit v1.2.3 From df828598a755732e717b0adca82f884e44d37576 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Sun, 18 Mar 2012 20:17:54 +0000 Subject: netdev: driver: ethernet: Add TI CPSW driver This patch adds support for TI's CPSW driver. The three port switch gigabit ethernet subsystem provides ethernet packet communication and can be configured as an ethernet switch. Supports 10/100/1000 Mbps. Signed-off-by: Cyril Chemparathy Signed-off-by: Sriramakrishnan A G Signed-off-by: Mugunthan V N Signed-off-by: David S. Miller --- include/linux/platform_data/cpsw.h | 55 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+) create mode 100644 include/linux/platform_data/cpsw.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/cpsw.h b/include/linux/platform_data/cpsw.h new file mode 100644 index 000000000000..c4e23d029498 --- /dev/null +++ b/include/linux/platform_data/cpsw.h @@ -0,0 +1,55 @@ +/* + * Texas Instruments Ethernet Switch Driver + * + * Copyright (C) 2012 Texas Instruments + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __CPSW_H__ +#define __CPSW_H__ + +#include + +struct cpsw_slave_data { + u32 slave_reg_ofs; + u32 sliver_reg_ofs; + const char *phy_id; + int phy_if; + u8 mac_addr[ETH_ALEN]; +}; + +struct cpsw_platform_data { + u32 ss_reg_ofs; /* Subsystem control register offset */ + u32 channels; /* number of cpdma channels (symmetric) */ + u32 cpdma_reg_ofs; /* cpdma register offset */ + u32 cpdma_sram_ofs; /* cpdma sram offset */ + + u32 slaves; /* number of slave cpgmac ports */ + struct cpsw_slave_data *slave_data; + + u32 ale_reg_ofs; /* address lookup engine reg offset */ + u32 ale_entries; /* ale table size */ + + u32 host_port_reg_ofs; /* cpsw cpdma host port registers */ + u32 host_port_num; /* The port number for the host port */ + + u32 hw_stats_reg_ofs; /* cpsw hardware statistics counters */ + + u32 bd_ram_ofs; /* embedded buffer descriptor RAM offset*/ + u32 bd_ram_size; /*buffer descriptor ram size */ + u32 hw_ram_addr; /*if the HW address for BD RAM is different */ + bool no_bd_ram; /* no embedded BD ram*/ + + u32 rx_descs; /* Number of Rx Descriptios */ + + u32 mac_control; /* Mac control register */ +}; + +#endif /* __CPSW_H__ */ -- cgit v1.2.3 From 6a92c36688bd6d8e68e19ca9b5e41e8197921b59 Mon Sep 17 00:00:00 2001 From: Vincenzo Frascino Date: Wed, 21 Mar 2012 12:55:03 -0700 Subject: thermal: add support for thermal sensor present on SPEAr13xx machines ST's SPEAr13xx machines are based on CortexA9 ARM processors. These machines contain a thermal sensor for junction temperature monitoring. This patch adds support for this thermal sensor in existing thermal framework. [akpm@linux-foundation.org: little code cleanup] [akpm@linux-foundation.org: print the pointer correctly] [viresh.kumar@st.com: thermal/spear_thermal: add compilation dependency on PLAT_SPEAR] Signed-off-by: Vincenzo Frascino Signed-off-by: Viresh Kumar Signed-off-by: Viresh Kumar Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- include/linux/platform_data/spear_thermal.h | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 include/linux/platform_data/spear_thermal.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/spear_thermal.h b/include/linux/platform_data/spear_thermal.h new file mode 100644 index 000000000000..724f2e1cbbcb --- /dev/null +++ b/include/linux/platform_data/spear_thermal.h @@ -0,0 +1,26 @@ +/* + * SPEAr thermal driver platform data. + * + * Copyright (C) 2011-2012 ST Microelectronics + * Author: Vincenzo Frascino + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#ifndef SPEAR_THERMAL_H +#define SPEAR_THERMAL_H + +/* SPEAr Thermal Sensor Platform Data */ +struct spear_thermal_pdata { + /* flags used to enable thermal sensor */ + unsigned int thermal_flags; +}; + +#endif /* SPEAR_THERMAL_H */ -- cgit v1.2.3