From 11c32d7b6274cb0f554943d65bd4a126c4a86dcd Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 22 May 2014 23:25:14 +0200 Subject: video: move Versatile CLCD helpers This moves the Versatile-specific helper code and panel database down into the drivers/video folder next to the CLCD driver itself, preserving the config symbol but also moving the header to platform data. This is necessary to rid the Integrator of this final inclusion dependency and get us one less user of the plat-versatile folder. Cc: Arnd Bergmann Cc: Jean-Christophe Plagniol-Villard Cc: linux-fbdev@vger.kernel.org Cc: Russell King Acked-by: Tomi Valkeinen Signed-off-by: Linus Walleij --- include/linux/platform_data/video-clcd-versatile.h | 9 +++++++++ 1 file changed, 9 insertions(+) create mode 100644 include/linux/platform_data/video-clcd-versatile.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/video-clcd-versatile.h b/include/linux/platform_data/video-clcd-versatile.h new file mode 100644 index 000000000000..6bb6a1d2019b --- /dev/null +++ b/include/linux/platform_data/video-clcd-versatile.h @@ -0,0 +1,9 @@ +#ifndef PLAT_CLCD_H +#define PLAT_CLCD_H + +struct clcd_panel *versatile_clcd_get_panel(const char *); +int versatile_clcd_setup_dma(struct clcd_fb *, unsigned long); +int versatile_clcd_mmap_dma(struct clcd_fb *, struct vm_area_struct *); +void versatile_clcd_remove_dma(struct clcd_fb *); + +#endif -- cgit v1.2.3 From 2cd3a2a54656f9c480b1c7272fc07635d575841b Mon Sep 17 00:00:00 2001 From: Andreas Fenkart Date: Thu, 29 May 2014 10:28:00 +0200 Subject: mmc: omap_hsmmc: Enable SDIO interrupt There have been various patches floating around for enabling the SDIO IRQ for hsmmc, but none of them ever got merged. Probably the reason for not merging the SDIO interrupt patches has been the lack of wake-up path for SDIO on some omaps that has also needed remuxing the SDIO DAT1 line to a GPIO making the patches complex. This patch adds the minimal SDIO IRQ support to hsmmc for omaps that do have the wake-up path. For those omaps, the DAT1 line need to have the wake-up enable bit set, and the wake-up interrupt is the same as for the MMC controller. This patch has been tested on am3730 es1.2 with mwifiex connected to MMC3 with mwifiex waking to Ethernet traffic from off-idle mode. Note that for omaps that do not have the SDIO wake-up path, this patch will not work for idle modes and further patches for remuxing DAT1 to GPIO are needed. Based on earlier patches [1][2] by David Vrabel , Steve Sakoman For now, only support SDIO interrupt if we are booted with a separate wake-irq configued via device tree. This is because omaps need the wake-irq for idle states, and some omaps need special quirks. And we don't want to add new legacy mux platform init code callbacks any longer as we are moving to DT based booting anyways. To use it, you need to specify the wake-irq using the interrupts-extended property. [1] http://www.sakoman.com/cgi-bin/gitweb.cgi?p=linux.git;a=commitdiff_plain;h=010810d22f6f49ac03da4ba384969432e0320453 [2] http://comments.gmane.org/gmane.linux.kernel.mmc/20446 Acked-by: Balaji T K Signed-off-by: Andreas Fenkart Signed-off-by: Tony Lindgren Signed-off-by: Ulf Hansson --- include/linux/platform_data/mmc-omap.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/mmc-omap.h b/include/linux/platform_data/mmc-omap.h index 2bf1b30cb5dc..51e70cf25cbc 100644 --- a/include/linux/platform_data/mmc-omap.h +++ b/include/linux/platform_data/mmc-omap.h @@ -28,6 +28,7 @@ */ #define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(0) #define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ BIT(1) +#define OMAP_HSMMC_SWAKEUP_MISSING BIT(2) struct mmc_card; -- cgit v1.2.3 From e1b243772d455f3b25b410a15a5677a9e74ffa37 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Tue, 20 May 2014 20:43:51 +0400 Subject: ARM: i.MX: Remove registration helper for i.MX1 USB UDC imx_udc driver was removed from the kernel of about 10 months ago. This patch removes a registration helper for this driver and orphaned driver header. Signed-off-by: Alexander Shiyan Signed-off-by: Shawn Guo --- include/linux/platform_data/usb-imx_udc.h | 23 ----------------------- 1 file changed, 23 deletions(-) delete mode 100644 include/linux/platform_data/usb-imx_udc.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/usb-imx_udc.h b/include/linux/platform_data/usb-imx_udc.h deleted file mode 100644 index be273371f34a..000000000000 --- a/include/linux/platform_data/usb-imx_udc.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright (C) 2008 Darius Augulis - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_MXC_USB -#define __ASM_ARCH_MXC_USB - -struct imxusb_platform_data { - int (*init)(struct device *); - void (*exit)(struct device *); -}; - -#endif /* __ASM_ARCH_MXC_USB */ -- cgit v1.2.3 From 641dfe8b73e81aa38cbbeab72a480462a4987963 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 19 May 2014 20:41:52 +0800 Subject: ARM: imx: move EHCI platform defines out of platform_data header The platform_data header usb-ehci-mxc.h has a lot of stuff used by only IMX platform code. They shouldn't be really in this header but a IMX platform local header. Create ehci.h and move these stuff into it. Signed-off-by: Shawn Guo --- include/linux/platform_data/usb-ehci-mxc.h | 46 ------------------------------ 1 file changed, 46 deletions(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/usb-ehci-mxc.h b/include/linux/platform_data/usb-ehci-mxc.h index 7eb9d1329671..157e71f79f99 100644 --- a/include/linux/platform_data/usb-ehci-mxc.h +++ b/include/linux/platform_data/usb-ehci-mxc.h @@ -1,46 +1,6 @@ #ifndef __INCLUDE_ASM_ARCH_MXC_EHCI_H #define __INCLUDE_ASM_ARCH_MXC_EHCI_H -/* values for portsc field */ -#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23) -#define MXC_EHCI_FORCE_FS (1 << 24) -#define MXC_EHCI_UTMI_8BIT (0 << 28) -#define MXC_EHCI_UTMI_16BIT (1 << 28) -#define MXC_EHCI_SERIAL (1 << 29) -#define MXC_EHCI_MODE_UTMI (0 << 30) -#define MXC_EHCI_MODE_PHILIPS (1 << 30) -#define MXC_EHCI_MODE_ULPI (2 << 30) -#define MXC_EHCI_MODE_SERIAL (3 << 30) - -/* values for flags field */ -#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0) -#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0) -#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0) -#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0) -#define MXC_EHCI_INTERFACE_MASK (0xf) - -#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5) -#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH (1 << 6) -#define MXC_EHCI_OC_PIN_ACTIVE_LOW (1 << 7) -#define MXC_EHCI_TTL_ENABLED (1 << 8) - -#define MXC_EHCI_INTERNAL_PHY (1 << 9) -#define MXC_EHCI_IPPUE_DOWN (1 << 10) -#define MXC_EHCI_IPPUE_UP (1 << 11) -#define MXC_EHCI_WAKEUP_ENABLED (1 << 12) -#define MXC_EHCI_ITC_NO_THRESHOLD (1 << 13) - -#define MXC_USBCTRL_OFFSET 0 -#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8 -#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc -#define MXC_USBH2CTRL_OFFSET 0x14 - -#define MX5_USBOTHER_REGS_OFFSET 0x800 - -/* USB_PHY_CTRL_FUNC2*/ -#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK 0x3 -#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_SHIFT 0 - struct mxc_usbh_platform_data { int (*init)(struct platform_device *pdev); int (*exit)(struct platform_device *pdev); @@ -49,11 +9,5 @@ struct mxc_usbh_platform_data { struct usb_phy *otg; }; -int mx51_initialize_usb_hw(int port, unsigned int flags); -int mx25_initialize_usb_hw(int port, unsigned int flags); -int mx31_initialize_usb_hw(int port, unsigned int flags); -int mx35_initialize_usb_hw(int port, unsigned int flags); -int mx27_initialize_usb_hw(int port, unsigned int flags); - #endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */ -- cgit v1.2.3 From 35e3bc535d0437ca5f32985a294703ce48c75d88 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sat, 5 Jul 2014 08:51:38 +0400 Subject: ARM: i.MX: Remove i.MX1 camera support i.MX1 camera driver has been removed by the commit 90b055898e. This patch removes remaining support files for this camera. Signed-off-by: Alexander Shiyan Signed-off-by: Shawn Guo --- include/linux/platform_data/camera-mx1.h | 35 -------------------------------- 1 file changed, 35 deletions(-) delete mode 100644 include/linux/platform_data/camera-mx1.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/camera-mx1.h b/include/linux/platform_data/camera-mx1.h deleted file mode 100644 index 4fd6c70314b4..000000000000 --- a/include/linux/platform_data/camera-mx1.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * mx1_camera.h - i.MX1/i.MXL camera driver header file - * - * Copyright (c) 2008, Paulius Zaleckas - * Copyright (C) 2009, Darius Augulis - * - * Based on PXA camera.h file: - * Copyright (C) 2003, Intel Corporation - * Copyright (C) 2008, Guennadi Liakhovetski - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_CAMERA_H_ -#define __ASM_ARCH_CAMERA_H_ - -#define MX1_CAMERA_DATA_HIGH 1 -#define MX1_CAMERA_PCLK_RISING 2 -#define MX1_CAMERA_VSYNC_HIGH 4 - -extern unsigned char mx1_camera_sof_fiq_start, mx1_camera_sof_fiq_end; - -/** - * struct mx1_camera_pdata - i.MX1/i.MXL camera platform data - * @mclk_10khz: master clock frequency in 10kHz units - * @flags: MX1 camera platform flags - */ -struct mx1_camera_pdata { - unsigned long mclk_10khz; - unsigned long flags; -}; - -#endif /* __ASM_ARCH_CAMERA_H_ */ -- cgit v1.2.3 From ec4c4d877becf1c224f45347f4fc0016765e00d0 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 15 Jul 2014 09:58:06 +0200 Subject: video: fix up versatile CLCD helper move commit 11c32d7b6274cb0f ("video: move Versatile CLCD helpers") moved files out of the plat-versatile directory but in the process got a few of the dependencies wrong: - If CONFIG_FB is not set, the file no longer gets built, resulting in a link error - If CONFIG_FB or CONFIG_FB_ARMCLCD are disabled, we also get a Kconfig warning for incorrect dependencies due to the symbol being 'select'ed from the platform Kconfig. - When the file is not built, we also get a link error for missing symbols. This patch should fix all three, by removing the 'select' statements, changing the Kconfig description of the symbol to be enabled in exactly the right configurations, and adding inline stub functions for the case when the framebuffer driver is disabled. Signed-off-by: Arnd Bergmann Reviewed-by: Linus Walleij --- include/linux/platform_data/video-clcd-versatile.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/video-clcd-versatile.h b/include/linux/platform_data/video-clcd-versatile.h index 6bb6a1d2019b..09ccf182af4d 100644 --- a/include/linux/platform_data/video-clcd-versatile.h +++ b/include/linux/platform_data/video-clcd-versatile.h @@ -1,9 +1,27 @@ #ifndef PLAT_CLCD_H #define PLAT_CLCD_H +#ifdef CONFIG_PLAT_VERSATILE_CLCD struct clcd_panel *versatile_clcd_get_panel(const char *); int versatile_clcd_setup_dma(struct clcd_fb *, unsigned long); int versatile_clcd_mmap_dma(struct clcd_fb *, struct vm_area_struct *); void versatile_clcd_remove_dma(struct clcd_fb *); +#else +static inline struct clcd_panel *versatile_clcd_get_panel(const char *s) +{ + return NULL; +} +static inline int versatile_clcd_setup_dma(struct clcd_fb *fb, unsigned long framesize) +{ + return -ENODEV; +} +static inline int versatile_clcd_mmap_dma(struct clcd_fb *fb, struct vm_area_struct *vm) +{ + return -ENODEV; +} +static inline void versatile_clcd_remove_dma(struct clcd_fb *fb) +{ +} +#endif #endif -- cgit v1.2.3 From f892afb07eeecf575179c4747952644a82a92a36 Mon Sep 17 00:00:00 2001 From: Nicolin Chen Date: Mon, 16 Jun 2014 11:31:05 +0800 Subject: dmaengine: imx-sdma: Add a new DMATYPE for Shared Peripheral ASRC Shared Peripheral ASRC, running on SPBA, needs to use shp sciprts for DMA transfer. So this patch just adds a new DMATYPE for it. Signed-off-by: Nicolin Chen Acked-by: Shawn Guo Signed-off-by: Vinod Koul --- include/linux/platform_data/dma-imx.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/dma-imx.h b/include/linux/platform_data/dma-imx.h index bcbc6c3c14c0..7aa0e89d1bcc 100644 --- a/include/linux/platform_data/dma-imx.h +++ b/include/linux/platform_data/dma-imx.h @@ -40,6 +40,7 @@ enum sdma_peripheral_type { IMX_DMATYPE_ASRC, /* ASRC */ IMX_DMATYPE_ESAI, /* ESAI */ IMX_DMATYPE_SSI_DUAL, /* SSI Dual FIFO */ + IMX_DMATYPE_ASRC_SP, /* Shared ASRC */ }; enum imx_dma_prio { -- cgit v1.2.3 From eb3fe7def66511120766c8fc05ee9631cce7fe6f Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Tue, 8 Jul 2014 13:46:37 +0300 Subject: ARM: edma: Add edma_assign_channel_eventq() to move channel to a give queue In some cases it is desired to move a channel to a specific event queue. Such a use case is audio, where it is preferred that it is served with highest priority compared to other DMA clients. Signed-off-by: Peter Ujfalusi Acked-by: Sekhar Nori Signed-off-by: Vinod Koul --- include/linux/platform_data/edma.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h index eb8d5627d080..bdb2710e2aab 100644 --- a/include/linux/platform_data/edma.h +++ b/include/linux/platform_data/edma.h @@ -150,6 +150,8 @@ void edma_clear_event(unsigned channel); void edma_pause(unsigned channel); void edma_resume(unsigned channel); +void edma_assign_channel_eventq(unsigned channel, enum dma_event_q eventq_no); + struct edma_rsv_info { const s16 (*rsv_chans)[2]; -- cgit v1.2.3