From bfed345edfe05b291f7e5d396d4b447b6e8e66fa Mon Sep 17 00:00:00 2001 From: Zhangfei Gao Date: Mon, 20 Jun 2011 22:11:52 +0800 Subject: mmc: sdhci-pxa: move platform data to include/linux/platform_data As suggested by Arnd, move platform data to include/linux/platform_data in order to improve build coverage for the driver. Signed-off-by: Zhangfei Gao Acked-by: Arnd Bergmann Signed-off-by: Chris Ball --- include/linux/platform_data/pxa_sdhci.h | 60 +++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+) create mode 100644 include/linux/platform_data/pxa_sdhci.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/pxa_sdhci.h b/include/linux/platform_data/pxa_sdhci.h new file mode 100644 index 000000000000..51ad0995abac --- /dev/null +++ b/include/linux/platform_data/pxa_sdhci.h @@ -0,0 +1,60 @@ +/* + * include/linux/platform_data/pxa_sdhci.h + * + * Copyright 2010 Marvell + * Zhangfei Gao + * + * PXA Platform - SDHCI platform data definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _PXA_SDHCI_H_ +#define _PXA_SDHCI_H_ + +/* pxa specific flag */ +/* Require clock free running */ +#define PXA_FLAG_ENABLE_CLOCK_GATING (1<<0) +/* card always wired to host, like on-chip emmc */ +#define PXA_FLAG_CARD_PERMANENT (1<<1) +/* Board design supports 8-bit data on SD/SDIO BUS */ +#define PXA_FLAG_SD_8_BIT_CAPABLE_SLOT (1<<2) + +/* + * struct pxa_sdhci_platdata() - Platform device data for PXA SDHCI + * @flags: flags for platform requirement + * @clk_delay_cycles: + * mmp2: each step is roughly 100ps, 5bits width + * pxa910: each step is 1ns, 4bits width + * @clk_delay_sel: select clk_delay, used on pxa910 + * 0: choose feedback clk + * 1: choose feedback clk + delay value + * 2: choose internal clk + * @clk_delay_enable: enable clk_delay or not, used on pxa910 + * @ext_cd_gpio: gpio pin used for external CD line + * @ext_cd_gpio_invert: invert values for external CD gpio line + * @max_speed: the maximum speed supported + * @host_caps: Standard MMC host capabilities bit field. + * @quirks: quirks of platfrom + * @pm_caps: pm_caps of platfrom + */ +struct sdhci_pxa_platdata { + unsigned int flags; + unsigned int clk_delay_cycles; + unsigned int clk_delay_sel; + bool clk_delay_enable; + unsigned int ext_cd_gpio; + bool ext_cd_gpio_invert; + unsigned int max_speed; + unsigned int host_caps; + unsigned int quirks; + unsigned int pm_caps; +}; + +struct sdhci_pxa { + u8 clk_enable; + u8 power_mode; +}; +#endif /* _PXA_SDHCI_H_ */ -- cgit v1.2.3 From a1bb73d76bc814e9385390e6aa9880d884322e2e Mon Sep 17 00:00:00 2001 From: Donggeun Kim Date: Mon, 25 Jul 2011 17:13:07 -0700 Subject: drivers/misc: add support the FSA9480 USB Switch The FSA9480 is a USB port accessory detector and switch. This patch adds support the FSA9480 USB Switch. [akpm@linux-foundation.org: make a couple of things static] Signed-off-by: Donggeun Kim Signed-off-by: Minkyu Kang Signed-off-by: Kyungmin Park Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/platform_data/fsa9480.h | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 include/linux/platform_data/fsa9480.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/fsa9480.h b/include/linux/platform_data/fsa9480.h new file mode 100644 index 000000000000..72dddcb4bed1 --- /dev/null +++ b/include/linux/platform_data/fsa9480.h @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2010 Samsung Electronics + * Minkyu Kang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _FSA9480_H_ +#define _FSA9480_H_ + +#define FSA9480_ATTACHED 1 +#define FSA9480_DETACHED 0 + +struct fsa9480_platform_data { + void (*cfg_gpio) (void); + void (*usb_cb) (u8 attached); + void (*uart_cb) (u8 attached); + void (*charger_cb) (u8 attached); + void (*jig_cb) (u8 attached); + void (*reset_cb) (void); + void (*usb_power) (u8 on); + int wakeup; +}; + +#endif /* _FSA9480_H_ */ -- cgit v1.2.3 From f22aaaa70d8c24e5dc7d23a219c4beace8354b65 Mon Sep 17 00:00:00 2001 From: Donggeun Kim Date: Mon, 20 Jun 2011 16:48:19 +0900 Subject: hwmon: Driver for NTC Thermistors Add support for NTC Thermistor series. In this release, the following thermistors are supported: NCP15WB473, NCP18WB473, NCP03WB473, and NCP15WL333. This driver is based on the datasheet of MURATA. The driver in the patch does conversion from the raw ADC value (either voltage or resistence) to temperature. In order to use voltage values as input, the circuit schematics should be provided with the platform data. A compensation table for each type of thermistor is provided for the conversion. Signed-off-by: Donggeun Kim Signed-off-by: MyungJoo Ham Signed-off-by: KyungMin Park Reviewed-by: Shubhrajyoti D Signed-off-by: Guenter Roeck --- include/linux/platform_data/ntc_thermistor.h | 53 ++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+) create mode 100644 include/linux/platform_data/ntc_thermistor.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/ntc_thermistor.h b/include/linux/platform_data/ntc_thermistor.h new file mode 100644 index 000000000000..abd286215279 --- /dev/null +++ b/include/linux/platform_data/ntc_thermistor.h @@ -0,0 +1,53 @@ +/* + * ntc_thermistor.h - NTC Thermistors + * + * Copyright (C) 2010 Samsung Electronics + * MyungJoo Ham + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _LINUX_NTC_H +#define _LINUX_NTC_H + +enum ntc_thermistor_type { + TYPE_NCPXXWB473, + TYPE_NCPXXWL333, +}; + +struct ntc_thermistor_platform_data { + /* + * One (not both) of read_uV and read_ohm should be provided and only + * one of the two should be provided. + * Both functions should return negative value for an error case. + * + * pullup_uV, pullup_ohm, pulldown_ohm, and connect are required to use + * read_uV() + * + * How to setup pullup_ohm, pulldown_ohm, and connect is + * described at Documentation/hwmon/ntc + * + * pullup/down_ohm: 0 for infinite / not-connected + */ + int (*read_uV)(void); + unsigned int pullup_uV; + + unsigned int pullup_ohm; + unsigned int pulldown_ohm; + enum { NTC_CONNECTED_POSITIVE, NTC_CONNECTED_GROUND } connect; + + int (*read_ohm)(void); +}; + +#endif /* _LINUX_NTC_H */ -- cgit v1.2.3 From 9962444f592a53c08ce439b6dc362bba7ce5fd7e Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 1 Sep 2011 22:26:25 +0300 Subject: usb: dwc3: omap: distinguish between SW and HW modes The OMAP wrapper allows us to either control internal OTG signals via SW or HW. Different boards might wish to use one or the other mode of operation. Let's have have that information passed via platform_data for now. After DT conversion is finished for OMAP, we can easily convert this to a DT attribute. Signed-off-by: Felipe Balbi --- include/linux/platform_data/dwc3-omap.h | 47 +++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) create mode 100644 include/linux/platform_data/dwc3-omap.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/dwc3-omap.h b/include/linux/platform_data/dwc3-omap.h new file mode 100644 index 000000000000..ada401244e0b --- /dev/null +++ b/include/linux/platform_data/dwc3-omap.h @@ -0,0 +1,47 @@ +/** + * dwc3-omap.h - OMAP Specific Glue layer, header. + * + * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com + * All rights reserved. + * + * Author: Felipe Balbi + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2, as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +enum dwc3_omap_utmi_mode { + DWC3_OMAP_UTMI_MODE_UNKNOWN = 0, + DWC3_OMAP_UTMI_MODE_HW, + DWC3_OMAP_UTMI_MODE_SW, +}; + +struct dwc3_omap_data { + enum dwc3_omap_utmi_mode utmi_mode; +}; -- cgit v1.2.3 From 395cf9691d72173d8cdaa613c5f0255f993af94b Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Mon, 15 Aug 2011 02:02:26 +0200 Subject: doc: fix broken references There are numerous broken references to Documentation files (in other Documentation files, in comments, etc.). These broken references are caused by typo's in the references, and by renames or removals of the Documentation files. Some broken references are simply odd. Fix these broken references, sometimes by dropping the irrelevant text they were part of. Signed-off-by: Paul Bolle Signed-off-by: Jiri Kosina --- include/linux/platform_data/ntc_thermistor.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/ntc_thermistor.h b/include/linux/platform_data/ntc_thermistor.h index abd286215279..88734e871e3a 100644 --- a/include/linux/platform_data/ntc_thermistor.h +++ b/include/linux/platform_data/ntc_thermistor.h @@ -36,7 +36,7 @@ struct ntc_thermistor_platform_data { * read_uV() * * How to setup pullup_ohm, pulldown_ohm, and connect is - * described at Documentation/hwmon/ntc + * described at Documentation/hwmon/ntc_thermistor * * pullup/down_ohm: 0 for infinite / not-connected */ -- cgit v1.2.3 From dde34cc5019b51088c18ca789d4b1a20cf9bc617 Mon Sep 17 00:00:00 2001 From: Neil Zhang Date: Wed, 12 Oct 2011 16:49:24 +0800 Subject: usb: gadget: mv_udc: refine the driver structure This patch do the following things: 1. Add header and Copyright for marvell usb driver. 2. Add mv_usb.h in include/linux/platform_data, make the driver fits all the marvell platform using the same ChipIdea usb ip. 3. Some SOC may has mutiple clock sources, so let me define it in mv_usb_platform_data and give two helper functions named udc_clock_enable/udc_clock_disable to deal with the clocks. 4. Different SOCs will have some difference in PHY initialization, so we will remove file mv_udc_phy.c and add two funtions in mv_usb_platform_data, let the platform relative driver to realize it. 5. Rewrite probe function according to the modification list above. Find it will kernel panic when probe failed. The root cause is as follows: When probe failed, the error handle may call device_unregister() which in return will call gadget_release.In current code, gadget_release have two issues: 1: the_controller is a NULL pointer. 2: if we free udc here, then the following code in probe will access NULL pointer. Signed-off-by: Neil Zhang Signed-off-by: Felipe Balbi --- include/linux/platform_data/mv_usb.h | 50 ++++++++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+) create mode 100644 include/linux/platform_data/mv_usb.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/mv_usb.h b/include/linux/platform_data/mv_usb.h new file mode 100644 index 000000000000..e9d9149ddf38 --- /dev/null +++ b/include/linux/platform_data/mv_usb.h @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2011 Marvell International Ltd. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __MV_PLATFORM_USB_H +#define __MV_PLATFORM_USB_H + +enum pxa_ehci_type { + EHCI_UNDEFINED = 0, + PXA_U2OEHCI, /* pxa 168, 9xx */ + PXA_SPH, /* pxa 168, 9xx SPH */ + MMP3_HSIC, /* mmp3 hsic */ + MMP3_FSIC, /* mmp3 fsic */ +}; + +enum { + MV_USB_MODE_OTG, + MV_USB_MODE_HOST, +}; + +enum { + VBUS_LOW = 0, + VBUS_HIGH = 1 << 0, +}; + +struct mv_usb_addon_irq { + unsigned int irq; + int (*poll)(void); +}; + +struct mv_usb_platform_data { + unsigned int clknum; + char **clkname; + struct mv_usb_addon_irq *id; /* Only valid for OTG. ID pin change*/ + struct mv_usb_addon_irq *vbus; /* valid for OTG/UDC. VBUS change*/ + + /* only valid for HCD. OTG or Host only*/ + unsigned int mode; + + int (*phy_init)(unsigned int regbase); + void (*phy_deinit)(unsigned int regbase); + int (*set_vbus)(unsigned int vbus); +}; + +#endif -- cgit v1.2.3 From 9d97e5c81e15afaef65d00f077f863c94f750839 Mon Sep 17 00:00:00 2001 From: Donggeun Kim Date: Wed, 7 Sep 2011 18:49:08 +0900 Subject: hwmon: Add driver for EXYNOS4 TMU This patch allows to read temperature from TMU(Thermal Management Unit) of SAMSUNG EXYNOS4 series of SoC. Signed-off-by: Donggeun Kim Signed-off-by: MyungJoo Ham Signed-off-by: Kyungmin Park Signed-off-by: Guenter Roeck --- include/linux/platform_data/exynos4_tmu.h | 83 +++++++++++++++++++++++++++++++ 1 file changed, 83 insertions(+) create mode 100644 include/linux/platform_data/exynos4_tmu.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/exynos4_tmu.h b/include/linux/platform_data/exynos4_tmu.h new file mode 100644 index 000000000000..39e038cca590 --- /dev/null +++ b/include/linux/platform_data/exynos4_tmu.h @@ -0,0 +1,83 @@ +/* + * exynos4_tmu.h - Samsung EXYNOS4 TMU (Thermal Management Unit) + * + * Copyright (C) 2011 Samsung Electronics + * Donggeun Kim + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _LINUX_EXYNOS4_TMU_H +#define _LINUX_EXYNOS4_TMU_H + +enum calibration_type { + TYPE_ONE_POINT_TRIMMING, + TYPE_TWO_POINT_TRIMMING, + TYPE_NONE, +}; + +/** + * struct exynos4_tmu_platform_data + * @threshold: basic temperature for generating interrupt + * 25 <= threshold <= 125 [unit: degree Celsius] + * @trigger_levels: array for each interrupt levels + * [unit: degree Celsius] + * 0: temperature for trigger_level0 interrupt + * condition for trigger_level0 interrupt: + * current temperature > threshold + trigger_levels[0] + * 1: temperature for trigger_level1 interrupt + * condition for trigger_level1 interrupt: + * current temperature > threshold + trigger_levels[1] + * 2: temperature for trigger_level2 interrupt + * condition for trigger_level2 interrupt: + * current temperature > threshold + trigger_levels[2] + * 3: temperature for trigger_level3 interrupt + * condition for trigger_level3 interrupt: + * current temperature > threshold + trigger_levels[3] + * @trigger_level0_en: + * 1 = enable trigger_level0 interrupt, + * 0 = disable trigger_level0 interrupt + * @trigger_level1_en: + * 1 = enable trigger_level1 interrupt, + * 0 = disable trigger_level1 interrupt + * @trigger_level2_en: + * 1 = enable trigger_level2 interrupt, + * 0 = disable trigger_level2 interrupt + * @trigger_level3_en: + * 1 = enable trigger_level3 interrupt, + * 0 = disable trigger_level3 interrupt + * @gain: gain of amplifier in the positive-TC generator block + * 0 <= gain <= 15 + * @reference_voltage: reference voltage of amplifier + * in the positive-TC generator block + * 0 <= reference_voltage <= 31 + * @cal_type: calibration type for temperature + * + * This structure is required for configuration of exynos4_tmu driver. + */ +struct exynos4_tmu_platform_data { + u8 threshold; + u8 trigger_levels[4]; + bool trigger_level0_en; + bool trigger_level1_en; + bool trigger_level2_en; + bool trigger_level3_en; + + u8 gain; + u8 reference_voltage; + + enum calibration_type cal_type; +}; +#endif /* _LINUX_EXYNOS4_TMU_H */ -- cgit v1.2.3 From 2b67c95b74f17c13c7b3a990540c9dd9b4a8480d Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 31 Oct 2011 17:12:09 -0700 Subject: drivers/leds/leds-renesas-tpu.c: move Renesas TPU LED driver platform data Use the platform_data include directory for the TPU LED driver, as suggested by Paul Mundt. Signed-off-by: Magnus Damm Cc: Paul Mundt Cc: Richard Purdie Cc: Grant Likely Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/platform_data/leds-renesas-tpu.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) create mode 100644 include/linux/platform_data/leds-renesas-tpu.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/leds-renesas-tpu.h b/include/linux/platform_data/leds-renesas-tpu.h new file mode 100644 index 000000000000..055387086fc1 --- /dev/null +++ b/include/linux/platform_data/leds-renesas-tpu.h @@ -0,0 +1,14 @@ +#ifndef __LEDS_RENESAS_TPU_H__ +#define __LEDS_RENESAS_TPU_H__ + +struct led_renesas_tpu_config { + char *name; + unsigned pin_gpio_fn; + unsigned pin_gpio; + unsigned int channel_offset; + unsigned int timer_bit; + unsigned int max_brightness; + unsigned int refresh_rate; +}; + +#endif /* __LEDS_RENESAS_TPU_H__ */ -- cgit v1.2.3