From 68957303f44a501af5cf37913208a2acaa6bcdf1 Mon Sep 17 00:00:00 2001 From: Christophe Ricard Date: Tue, 25 Mar 2014 06:51:47 +0100 Subject: NFC: ST21NFCA: Add driver for STMicroelectronics ST21NFCA NFC Chip Add driver for STMicroelectronics ST21NFCA NFC controller. ST21NFCA is using HCI protocol, shdlc as LLC layer & I2C as communication protocol. Adding support for Reader/Writer mode with Tag type 1/2/3/4 A & B. It is using proprietary gate 15 for ISO14443-3 such as type 1 & type 2 tags. It is using proprietary gate 14 for type F tags. ST21NFCA_DEVICE_MGNT_GATE gives access to proprietary CLF configuration. Standard gate for ISO14443-4 A (13) & B (11) are also used. ST21NFCA specific mecanism: One particular point to notice for the data handling is that frame does not contain any length value. Therefore the i2c part of this driver is managing the reception with a read length sequence until the end of frame (0x7e) is reached. In order to avoid conflict between sof & eof a mecanism called byte stuffing concist of an escape byte (0x7d) insertion before special byte (0x7e, 0x7d). The special byte is then xored with 0x20. In this driver, When data are available in the CLF, the interrupt gpio is driven to active state and triggered an interrupt. Once the i2c_master_recv start, the interrupt gpio is driven to idle state until its complete. If the frame is incomplete or data are still available, interrupts will be triggered again. Signed-off-by: Christophe Ricard Signed-off-by: Samuel Ortiz --- include/linux/platform_data/st21nfca.h | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) create mode 100644 include/linux/platform_data/st21nfca.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/st21nfca.h b/include/linux/platform_data/st21nfca.h new file mode 100644 index 000000000000..1730312398ff --- /dev/null +++ b/include/linux/platform_data/st21nfca.h @@ -0,0 +1,32 @@ +/* + * Driver include for the ST21NFCA NFC chip. + * + * Copyright (C) 2014 STMicroelectronics SAS. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see . + */ + +#ifndef _ST21NFCA_HCI_H_ +#define _ST21NFCA_HCI_H_ + +#include + +#define ST21NFCA_HCI_DRIVER_NAME "st21nfca_hci" + +struct st21nfca_nfc_platform_data { + unsigned int gpio_irq; + unsigned int gpio_ena; + unsigned int irq_polarity; +}; + +#endif /* _ST21NFCA_HCI_H_ */ -- cgit v1.2.3 From 2ce112f1e788a695630e2c275f47d57a801673d3 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sat, 5 Apr 2014 20:16:34 -0700 Subject: leds: pca9685: Remove leds-pca9685 driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This driver is replaced by pwm-pca9685 driver and there is no user uses this driver in current tree. So remove it. Signed-off-by: Axel Lin Acked-by: Steffen Trumtrar Acked-by: Maximilian Güntner Signed-off-by: Bryan Wu --- include/linux/platform_data/leds-pca9685.h | 35 ------------------------------ 1 file changed, 35 deletions(-) delete mode 100644 include/linux/platform_data/leds-pca9685.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/leds-pca9685.h b/include/linux/platform_data/leds-pca9685.h deleted file mode 100644 index 778e9e4249cc..000000000000 --- a/include/linux/platform_data/leds-pca9685.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright 2013 Maximilian Güntner - * - * This file is subject to the terms and conditions of version 2 of - * the GNU General Public License. See the file COPYING in the main - * directory of this archive for more details. - * - * Based on leds-pca963x.h by Peter Meerwald - * - * LED driver for the NXP PCA9685 PWM chip - * - */ - -#ifndef __LINUX_PCA9685_H -#define __LINUX_PCA9685_H - -#include - -enum pca9685_outdrv { - PCA9685_OPEN_DRAIN, - PCA9685_TOTEM_POLE, -}; - -enum pca9685_inverted { - PCA9685_NOT_INVERTED, - PCA9685_INVERTED, -}; - -struct pca9685_platform_data { - struct led_platform_data leds; - enum pca9685_outdrv outdrv; - enum pca9685_inverted inverted; -}; - -#endif /* __LINUX_PCA9685_H */ -- cgit v1.2.3 From 27c9fd607587e6c3b517590df4cd35ac85f3d0bd Mon Sep 17 00:00:00 2001 From: pekon gupta Date: Mon, 19 May 2014 13:24:39 +0530 Subject: mtd: nand: omap: add support for BCH16_ECC - GPMC driver updates This patch add support for BCH16_ECC in GPMC (controller) driver: - extends configuration space to include BCH16 registers - extends parsing of DT binding for selecting BCH16 ecc-scheme Signed-off-by: Pekon Gupta Acked-by: Tony Lindgren Signed-off-by: Brian Norris --- include/linux/platform_data/mtd-nand-omap2.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h index 3e9dd6676b97..660c029d694f 100644 --- a/include/linux/platform_data/mtd-nand-omap2.h +++ b/include/linux/platform_data/mtd-nand-omap2.h @@ -31,6 +31,8 @@ enum omap_ecc { OMAP_ECC_BCH8_CODE_HW_DETECTION_SW, /* 8-bit ECC calculation by GPMC, Error detection by ELM */ OMAP_ECC_BCH8_CODE_HW, + /* 16-bit ECC calculation by GPMC, Error detection by ELM */ + OMAP_ECC_BCH16_CODE_HW, }; struct gpmc_nand_regs { @@ -50,6 +52,9 @@ struct gpmc_nand_regs { void __iomem *gpmc_bch_result1[GPMC_BCH_NUM_REMAINDER]; void __iomem *gpmc_bch_result2[GPMC_BCH_NUM_REMAINDER]; void __iomem *gpmc_bch_result3[GPMC_BCH_NUM_REMAINDER]; + void __iomem *gpmc_bch_result4[GPMC_BCH_NUM_REMAINDER]; + void __iomem *gpmc_bch_result5[GPMC_BCH_NUM_REMAINDER]; + void __iomem *gpmc_bch_result6[GPMC_BCH_NUM_REMAINDER]; }; struct omap_nand_platform_data { -- cgit v1.2.3 From 2be589e4b28457f148640dc6addf6da24af64b7f Mon Sep 17 00:00:00 2001 From: pekon gupta Date: Mon, 19 May 2014 13:24:40 +0530 Subject: mtd: nand: omap: add support for BCH16_ECC - ELM driver updates ELM hardware engine is used to detect ECC errors for BCHx ecc-schemes (like BCH4/BCH8/BCH16). This patch extends configuration of ELM registers for adding support of BCH16_HW ecc-scheme. Signed-off-by: Pekon Gupta Signed-off-by: Brian Norris --- include/linux/platform_data/elm.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/elm.h b/include/linux/platform_data/elm.h index 4edb40676b3f..780d1e97f620 100644 --- a/include/linux/platform_data/elm.h +++ b/include/linux/platform_data/elm.h @@ -21,6 +21,7 @@ enum bch_ecc { BCH4_ECC = 0, BCH8_ECC, + BCH16_ECC, }; /* ELM support 8 error syndrome process */ @@ -38,7 +39,7 @@ struct elm_errorvec { bool error_reported; bool error_uncorrectable; int error_count; - int error_loc[ERROR_VECTOR_MAX]; + int error_loc[16]; }; void elm_decode_bch_error_page(struct device *dev, u8 *ecc_calc, -- cgit v1.2.3 From dc671157139918eaf61f73db1bd6dd02960b66e2 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Mon, 19 May 2014 22:42:34 +0200 Subject: pwm: renesas-tpu: remove unused struct tpu_pwm_platform_data The struct is not used anymore and the polarity initialization will be done using the PWM lookup table (or device tree). Signed-off-by: Alexandre Belloni Acked-by: Laurent Pinchart Acked-by: Simon Horman Signed-off-by: Thierry Reding --- include/linux/platform_data/pwm-renesas-tpu.h | 16 ---------------- 1 file changed, 16 deletions(-) delete mode 100644 include/linux/platform_data/pwm-renesas-tpu.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/pwm-renesas-tpu.h b/include/linux/platform_data/pwm-renesas-tpu.h deleted file mode 100644 index a7220b10ddab..000000000000 --- a/include/linux/platform_data/pwm-renesas-tpu.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __PWM_RENESAS_TPU_H__ -#define __PWM_RENESAS_TPU_H__ - -#include - -#define TPU_CHANNEL_MAX 4 - -struct tpu_pwm_channel_data { - enum pwm_polarity polarity; -}; - -struct tpu_pwm_platform_data { - struct tpu_pwm_channel_data channels[TPU_CHANNEL_MAX]; -}; - -#endif /* __PWM_RENESAS_TPU_H__ */ -- cgit v1.2.3 From 5b3e507820c6e120bc2680c0d35f9d9d81fcb98d Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Wed, 14 May 2014 14:58:08 -0300 Subject: mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding This commit adds support for the user to specify the ECC strength and step size through the devicetree. We keep the previous behavior, when there is no DT parameter provided. Signed-off-by: Ezequiel Garcia Signed-off-by: Brian Norris --- include/linux/platform_data/mtd-nand-pxa3xx.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/mtd-nand-pxa3xx.h b/include/linux/platform_data/mtd-nand-pxa3xx.h index a94147124929..ac4ea2e641c7 100644 --- a/include/linux/platform_data/mtd-nand-pxa3xx.h +++ b/include/linux/platform_data/mtd-nand-pxa3xx.h @@ -58,6 +58,9 @@ struct pxa3xx_nand_platform_data { /* use an flash-based bad block table */ bool flash_bbt; + /* requested ECC strength and ECC step size */ + int ecc_strength, ecc_step_size; + const struct mtd_partition *parts[NUM_CHIP_SELECT]; unsigned int nr_parts[NUM_CHIP_SELECT]; -- cgit v1.2.3 From 49b2f4c56fbf70ca693d6df1c491f0566d516aea Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Tue, 15 Apr 2014 08:35:25 -0300 Subject: [media] exynos4-is: Remove support for non-dt platforms All platforms supported by this driver are going to get device tree support in this kernel release so remove code that would have been actually not used any more. Signed-off-by: Sylwester Nawrocki Acked-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- include/linux/platform_data/mipi-csis.h | 28 ---------------------------- 1 file changed, 28 deletions(-) delete mode 100644 include/linux/platform_data/mipi-csis.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/mipi-csis.h b/include/linux/platform_data/mipi-csis.h deleted file mode 100644 index c2fd9024717c..000000000000 --- a/include/linux/platform_data/mipi-csis.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright (C) 2010 - 2012 Samsung Electronics Co., Ltd. - * - * Samsung S5P/Exynos SoC series MIPI CSIS device support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __PLAT_SAMSUNG_MIPI_CSIS_H_ -#define __PLAT_SAMSUNG_MIPI_CSIS_H_ __FILE__ - -/** - * struct s5p_platform_mipi_csis - platform data for S5P MIPI-CSIS driver - * @clk_rate: bus clock frequency - * @wclk_source: CSI wrapper clock selection: 0 - bus clock, 1 - ext. SCLK_CAM - * @lanes: number of data lanes used - * @hs_settle: HS-RX settle time - */ -struct s5p_platform_mipi_csis { - unsigned long clk_rate; - u8 wclk_source; - u8 lanes; - u8 hs_settle; -}; - -#endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */ -- cgit v1.2.3 From d25a2a16f0889de4a1cd8639896f35dc9465f6f5 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 2 Apr 2014 12:47:37 +0200 Subject: iommu: Add driver for Renesas VMSA-compatible IPMMU Signed-off-by: Laurent Pinchart Signed-off-by: Joerg Roedel --- include/linux/platform_data/ipmmu-vmsa.h | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 include/linux/platform_data/ipmmu-vmsa.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/ipmmu-vmsa.h b/include/linux/platform_data/ipmmu-vmsa.h new file mode 100644 index 000000000000..5275b3ac6d37 --- /dev/null +++ b/include/linux/platform_data/ipmmu-vmsa.h @@ -0,0 +1,24 @@ +/* + * IPMMU VMSA Platform Data + * + * Copyright (C) 2014 Renesas Electronics Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ + +#ifndef __IPMMU_VMSA_H__ +#define __IPMMU_VMSA_H__ + +struct ipmmu_vmsa_master { + const char *name; + unsigned int utlb; +}; + +struct ipmmu_vmsa_platform_data { + const struct ipmmu_vmsa_master *masters; + unsigned int num_masters; +}; + +#endif /* __IPMMU_VMSA_H__ */ -- cgit v1.2.3 From 4101866c743a3695666e8562b5713b4d7f341cbf Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Tue, 27 May 2014 10:53:17 +0200 Subject: ASoC: Add ADAU1X61 and ADAU1X81 CODECs common code The ADAU1X61 and ADAU1X81 are very similar in the digital domain, but are quite different in the analog domain. This patch adds support for the common parts of the ADAU1X61 and ADAU1X81 CODECs. The patch also restores some of the alphabetical order in the Makfile and Kconfig. Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- include/linux/platform_data/adau17x1.h | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 include/linux/platform_data/adau17x1.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/adau17x1.h b/include/linux/platform_data/adau17x1.h new file mode 100644 index 000000000000..f90bd9286f31 --- /dev/null +++ b/include/linux/platform_data/adau17x1.h @@ -0,0 +1,23 @@ +/* + * Driver for ADAU1761/ADAU1461/ADAU1761/ADAU1961/ADAU1781/ADAU1781 codecs + * + * Copyright 2011-2014 Analog Devices Inc. + * Author: Lars-Peter Clausen + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __LINUX_PLATFORM_DATA_ADAU17X1_H__ +#define __LINUX_PLATFORM_DATA_ADAU17X1_H__ + +/** + * enum adau17x1_micbias_voltage - Microphone bias voltage + * @ADAU17X1_MICBIAS_0_90_AVDD: 0.9 * AVDD + * @ADAU17X1_MICBIAS_0_65_AVDD: 0.65 * AVDD + */ +enum adau17x1_micbias_voltage { + ADAU17X1_MICBIAS_0_90_AVDD = 0, + ADAU17X1_MICBIAS_0_65_AVDD = 1, +}; + +#endif -- cgit v1.2.3 From dab464b60b2435a2aaae3630266db8ad130b7fad Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Tue, 27 May 2014 10:53:18 +0200 Subject: ASoC: Add ADAU1361/ADAU1761 audio CODEC support This patch adds support for the Analog Devices ADAU1361 and ADAU1761 CODECs. The device is a a low-power, 24-bit stereo audio CODEC with multiple analog input and outputs, one digital microphone input and an I2S interface. The device can be controlled either via I2C or SPI. The main difference between the two variants is that the ADAU1761 has a built-in SigmaDSP, while the ADAU1361 has not. Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- include/linux/platform_data/adau17x1.h | 67 ++++++++++++++++++++++++++++++++++ 1 file changed, 67 insertions(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/adau17x1.h b/include/linux/platform_data/adau17x1.h index f90bd9286f31..d234d9e46fd6 100644 --- a/include/linux/platform_data/adau17x1.h +++ b/include/linux/platform_data/adau17x1.h @@ -20,4 +20,71 @@ enum adau17x1_micbias_voltage { ADAU17X1_MICBIAS_0_65_AVDD = 1, }; +/** + * enum adau1761_digmic_jackdet_pin_mode - Configuration of the JACKDET/MICIN pin + * @ADAU1761_DIGMIC_JACKDET_PIN_MODE_NONE: Disable the pin + * @ADAU1761_DIGMIC_JACKDET_PIN_MODE_DIGMIC: Configure the pin for usage as + * digital microphone input. + * @ADAU1761_DIGMIC_JACKDET_PIN_MODE_JACKDETECT: Configure the pin for jack + * insertion detection. + */ +enum adau1761_digmic_jackdet_pin_mode { + ADAU1761_DIGMIC_JACKDET_PIN_MODE_NONE, + ADAU1761_DIGMIC_JACKDET_PIN_MODE_DIGMIC, + ADAU1761_DIGMIC_JACKDET_PIN_MODE_JACKDETECT, +}; + +/** + * adau1761_jackdetect_debounce_time - Jack insertion detection debounce time + * @ADAU1761_JACKDETECT_DEBOUNCE_5MS: 5 milliseconds + * @ADAU1761_JACKDETECT_DEBOUNCE_10MS: 10 milliseconds + * @ADAU1761_JACKDETECT_DEBOUNCE_20MS: 20 milliseconds + * @ADAU1761_JACKDETECT_DEBOUNCE_40MS: 40 milliseconds + */ +enum adau1761_jackdetect_debounce_time { + ADAU1761_JACKDETECT_DEBOUNCE_5MS = 0, + ADAU1761_JACKDETECT_DEBOUNCE_10MS = 1, + ADAU1761_JACKDETECT_DEBOUNCE_20MS = 2, + ADAU1761_JACKDETECT_DEBOUNCE_40MS = 3, +}; + +/** + * enum adau1761_output_mode - Output mode configuration + * @ADAU1761_OUTPUT_MODE_HEADPHONE: Headphone output + * @ADAU1761_OUTPUT_MODE_HEADPHONE_CAPLESS: Capless headphone output + * @ADAU1761_OUTPUT_MODE_LINE: Line output + */ +enum adau1761_output_mode { + ADAU1761_OUTPUT_MODE_HEADPHONE, + ADAU1761_OUTPUT_MODE_HEADPHONE_CAPLESS, + ADAU1761_OUTPUT_MODE_LINE, +}; + +/** + * struct adau1761_platform_data - ADAU1761 Codec driver platform data + * @input_differential: If true the input pins will be configured in + * differential mode. + * @lineout_mode: Output mode for the LOUT/ROUT pins + * @headphone_mode: Output mode for the LHP/RHP pins + * @digmic_jackdetect_pin_mode: JACKDET/MICIN pin configuration + * @jackdetect_debounce_time: Jack insertion detection debounce time. + * Note: This value will only be used, if the JACKDET/MICIN pin is configured + * for jack insertion detection. + * @jackdetect_active_low: If true the jack insertion detection is active low. + * Othwise it will be active high. + * @micbias_voltage: Microphone voltage bias + */ +struct adau1761_platform_data { + bool input_differential; + enum adau1761_output_mode lineout_mode; + enum adau1761_output_mode headphone_mode; + + enum adau1761_digmic_jackdet_pin_mode digmic_jackdetect_pin_mode; + + enum adau1761_jackdetect_debounce_time jackdetect_debounce_time; + bool jackdetect_active_low; + + enum adau17x1_micbias_voltage micbias_voltage; +}; + #endif -- cgit v1.2.3 From 2923af024681508132881c9e5ddd65cd51b0d8e3 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Tue, 27 May 2014 10:53:19 +0200 Subject: ASoC: Add ADAU1381/ADAU1781 audio CODEC support This patch adds support for the Analog Devices ADAU1381 and ADAU1781 audio CODECs. The device is a low-power, 24-bit stereo audio CODEC with multiple analog inputs and outputs, two digital microphone inputs and an I2S interface. The device can be controlled either using I2C or SPI. The main difference between the two variants is that the ADAU1781 has a freely programmable SigmaDSP processor, while the ADAU1381 has a fixed function wind noise reduction filter. Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- include/linux/platform_data/adau17x1.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/adau17x1.h b/include/linux/platform_data/adau17x1.h index d234d9e46fd6..a81766cae230 100644 --- a/include/linux/platform_data/adau17x1.h +++ b/include/linux/platform_data/adau17x1.h @@ -87,4 +87,23 @@ struct adau1761_platform_data { enum adau17x1_micbias_voltage micbias_voltage; }; +/** + * struct adau1781_platform_data - ADAU1781 Codec driver platform data + * @left_input_differential: If true configure the left input as + * differential input. + * @right_input_differential: If true configure the right input as differntial + * input. + * @use_dmic: If true configure the MIC pins as digital microphone pins instead + * of analog microphone pins. + * @micbias_voltage: Microphone voltage bias + */ +struct adau1781_platform_data { + bool left_input_differential; + bool right_input_differential; + + bool use_dmic; + + enum adau17x1_micbias_voltage micbias_voltage; +}; + #endif -- cgit v1.2.3 From 61721c88b8d85c9dc13bfeedf75dfc245f397c3c Mon Sep 17 00:00:00 2001 From: Joachim Eastwood Date: Thu, 29 May 2014 00:30:02 -0700 Subject: Input: omap-keypad - remove platform data support This is unused since all users (OMAP4/5) are DT only. Signed-off-by: Joachim Eastwood Signed-off-by: Dmitry Torokhov --- include/linux/platform_data/omap4-keypad.h | 13 ------------- 1 file changed, 13 deletions(-) delete mode 100644 include/linux/platform_data/omap4-keypad.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/omap4-keypad.h b/include/linux/platform_data/omap4-keypad.h deleted file mode 100644 index 4eef5fb05a17..000000000000 --- a/include/linux/platform_data/omap4-keypad.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __LINUX_INPUT_OMAP4_KEYPAD_H -#define __LINUX_INPUT_OMAP4_KEYPAD_H - -#include - -struct omap4_keypad_platform_data { - const struct matrix_keymap_data *keymap_data; - - u8 rows; - u8 cols; -}; - -#endif /* __LINUX_INPUT_OMAP4_KEYPAD_H */ -- cgit v1.2.3 From 87a1ef8058d9ab26bc289ea4f27bc3c11ce9acb8 Mon Sep 17 00:00:00 2001 From: David Cohen Date: Tue, 15 Apr 2014 13:06:05 -0700 Subject: watchdog: add Intel MID watchdog driver support Add initial Intel MID watchdog driver support. This driver is an initial implementation of generic Intel MID watchdog driver. Currently it supports Intel Merrifield platform. Signed-off-by: Eric Ernst Signed-off-by: David Cohen Reviewed-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- include/linux/platform_data/intel-mid_wdt.h | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 include/linux/platform_data/intel-mid_wdt.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/intel-mid_wdt.h b/include/linux/platform_data/intel-mid_wdt.h new file mode 100644 index 000000000000..b98253466ace --- /dev/null +++ b/include/linux/platform_data/intel-mid_wdt.h @@ -0,0 +1,22 @@ +/* + * intel-mid_wdt: generic Intel MID SCU watchdog driver + * + * Copyright (C) 2014 Intel Corporation. All rights reserved. + * Contact: David Cohen + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General + * Public License as published by the Free Software Foundation. + */ + +#ifndef __INTEL_MID_WDT_H__ +#define __INTEL_MID_WDT_H__ + +#include + +struct intel_mid_wdt_pdata { + int irq; + int (*probe)(struct platform_device *pdev); +}; + +#endif /*__INTEL_MID_WDT_H__*/ -- cgit v1.2.3 From 1a539d372edd9832444e7a3daa710c444c014dc9 Mon Sep 17 00:00:00 2001 From: Tomas Pop Date: Thu, 5 Jun 2014 15:24:19 -0700 Subject: hwmon: add support for Sensirion SHTC1 sensor Add support for Sensirion SHTC1 and compatible temperature and humidity sensors. Signed-off-by: Tomas Pop Signed-off-by: Guenter Roeck --- include/linux/platform_data/shtc1.h | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 include/linux/platform_data/shtc1.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/shtc1.h b/include/linux/platform_data/shtc1.h new file mode 100644 index 000000000000..7b8c353f7dc8 --- /dev/null +++ b/include/linux/platform_data/shtc1.h @@ -0,0 +1,23 @@ +/* + * Copyright (C) 2014 Sensirion AG, Switzerland + * Author: Johannes Winkelmann + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __SHTC1_H_ +#define __SHTC1_H_ + +struct shtc1_platform_data { + bool blocking_io; + bool high_precision; +}; +#endif /* __SHTC1_H_ */ -- cgit v1.2.3