From e9a03add0c6ed5341fc59ff9c76843c2888a33fa Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Tue, 3 Sep 2013 16:28:59 +0800 Subject: pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. The new ADI GPIO2 controller was introduced since the BF548 and BF60x processors. It differs a lot from the old one on BF5xx processors. So, create a pinctrl driver under the pinctrl framework. - Define gpio ports and pin interrupt controllers as individual platform devices. - Register a pinctrl driver for the whole GPIO ports and pin interrupt devices. - Probe pint devices before port devices. Put device instances into the global gpio and pint lists. - Define peripheral, irq and gpio reservation bit masks for each gpio port as runtime resources. - Save and restore gpio port and pint status MMRs in syscore PM functions. - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Handle peripheral and gpio requests in pinctrl operation functions. - Demux gpio IRQs via the irq_domain created by each GPIO port. v2-changes: - Remove unlinke() directive. v3-changes: - Rename struct adi_pmx to adi_pinctrl. - Fix the comments of struct gpio_pint. - Remove unused pin_base in struct gpio_port. - Change pint_assign into bool type. - Add comments about the relationship between pint device and port device to the driver header. - Use BIT macro to shift bit. - Remove all bitmap reservation help functions. Inline reservation functions into the actual code. - Remove gpio and offset mutual reference help functions. - Remove all help functions to find gpio_port and adi_pinctrl structs. Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by container_of() and find adi_pinctrl by pin control device name. - Pass bool type usage variable to port_setup help function. - Separate long bit operations into several lines and add comments. - Use debugfs to output all GPIO request information. - Avoid to set drvdata to NULL - Add explanation to function adi_gpio_init_int() - Call gpiochip_add_pin_range() in gpio device probe function to register range cross reference between gpio device and pin control device. - Remove the reference to pin control device from the gpio_port struct. Remove the reference list to gpio device from the adi_pinctrl struct. Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through the gpio list to do power suspend and resume operations. - Remove the global GPIO base from struct adi_pinctrl, define pin base in the platform data for each GPIO port device. - Initialize adi_pinctrl_setup in arch_initcall(). - print the status of triggers, whether it is in GPIO mode, if it is flagged to be used as IRQ, etc in adi_pin_dbg_show(). - Create the plug-in subdrivers to hold the pinctrl soc data for bf54x and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data in pin controller probe function. Get the pin groups and functions via the soc data reference. v4-changes: - remove useless system_state checking. - replace dev_err with dev_warn in both irq and gpio pin cases. - comment on relationship between irq type and invert operation. - It is not necessary to check the reservation mode of the requested pin in IRQ chip operation. Remove the reservation map. - Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2 driver specific debugfs output. - Add linkport group and function information for bf60x. - Separate uart and ctsrts pins into 2 groups. - Separate APAPI and alternative ATAPI pins into 2 groups. Signed-off-by: Sonic Zhang Signed-off-by: Linus Walleij --- include/linux/platform_data/pinctrl-adi2.h | 40 ++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 100644 include/linux/platform_data/pinctrl-adi2.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/pinctrl-adi2.h b/include/linux/platform_data/pinctrl-adi2.h new file mode 100644 index 000000000000..8f91300617ec --- /dev/null +++ b/include/linux/platform_data/pinctrl-adi2.h @@ -0,0 +1,40 @@ +/* + * Pinctrl Driver for ADI GPIO2 controller + * + * Copyright 2007-2013 Analog Devices Inc. + * + * Licensed under the GPLv2 or later + */ + + +#ifndef PINCTRL_ADI2_H +#define PINCTRL_ADI2_H + +#include +#include + +/** + * struct adi_pinctrl_gpio_platform_data - Pinctrl gpio platform data + * for ADI GPIO2 device. + * + * @port_gpio_base: Optional global GPIO index of the GPIO bank. + * 0 means driver decides. + * @port_pin_base: Pin index of the pin controller device. + * @port_width: PIN number of the GPIO bank device + * @pint_id: GPIO PINT device id that this GPIO bank should map to. + * @pint_assign: The 32-bit GPIO PINT registers can be divided into 2 parts. A + * GPIO bank can be mapped into either low 16 bits[0] or high 16 + * bits[1] of each PINT register. + * @pint_map: GIOP bank mapping code in PINT device + */ +struct adi_pinctrl_gpio_platform_data { + unsigned int port_gpio_base; + unsigned int port_pin_base; + unsigned int port_width; + u8 pinctrl_id; + u8 pint_id; + bool pint_assign; + u8 pint_map; +}; + +#endif -- cgit v1.2.3 From 118150f22d6b4431a1fe2e715de314a5d93836f5 Mon Sep 17 00:00:00 2001 From: KV Sujith Date: Sun, 18 Aug 2013 10:48:58 +0530 Subject: gpio: davinci: move to platform device Modify DaVinci GPIO driver to become a platform device driver. The driver does not have platform driver structure or a probe. Instead, it has pure_initcall function for initialization. The platform specific informaiton is obtained using the DaVinci specific davinci_soc_info structure. This is a problem for Device Tree (DT) implementation. As a first stage of DT conversion, we implement a probe. Additional notes: - The driver registration happens as postcore_initcall. This is required since machine init functions like da850_lcd_hw_init() make use of GPIO. - Start using devres APIs for simpler error handling. Signed-off-by: KV Sujith [avinashphilip@ti.com: Move global definition of "davinci_gpio_controller" to local] Signed-off-by: Philip Avinash Acked-by: Linus Walleij [nsekhar@ti.com: drop unused structure member, rebase to new clean-up patch and fix error messages] Signed-off-by: Sekhar Nori Signed-off-by: Lad, Prabhakar --- include/linux/platform_data/gpio-davinci.h | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 include/linux/platform_data/gpio-davinci.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/gpio-davinci.h b/include/linux/platform_data/gpio-davinci.h new file mode 100644 index 000000000000..2fcc125af1aa --- /dev/null +++ b/include/linux/platform_data/gpio-davinci.h @@ -0,0 +1,25 @@ +/* + * DaVinci GPIO Platform Related Defines + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __DAVINCI_GPIO_PLATFORM_H +#define __DAVINCI_GPIO_PLATFORM_H + +struct davinci_gpio_platform_data { + u32 ngpio; + u32 gpio_unbanked; + u32 intc_irq_num; +}; + +#endif -- cgit v1.2.3 From f1a4c52ff5913378b7baf05ac71f10282b341cf7 Mon Sep 17 00:00:00 2001 From: Philip Avinash Date: Sun, 18 Aug 2013 10:49:03 +0530 Subject: ARM: davinci: gpio: use gpiolib API instead of inline functions Remove NEED_MACH_GPIO_H config select option for ARCH_DAVINCI to start using gpiolib interface for davinci platforms. This makes it easier to use the gpio driver on other platforms as it breaks dependency on mach-davinci. Latencies for gpio_get/set APIs will increase. On measurement, latency was found to have increased by 18 microsecond with gpiolib API as compared to inline APIs. Measurement was done on DA850 EVM for gpio_get_value() API by taking the printk timing across the call with interrupts disabled. inline gpio API with interrupt disabled [ 29.734337] before gpio_get [ 29.736847] after gpio_get Time difference 0.00251 gpio library with interrupt disabled [ 272.876763] before gpio_get [ 272.879291] after gpio_get Time difference 0.002528 Latency increased by (0.002528 - 0.00251) = 18 microsecond. While at it, remove GPIO_TYPE_DAVINCI enum definition as gpio-davinci.c is converted to Linux device driver model. Signed-off-by: Philip Avinash Signed-off-by: Lad, Prabhakar Acked-by: Linus Walleij [nsekhar@ti.com: minor edits to commit message] Signed-off-by: Sekhar Nori --- include/linux/platform_data/gpio-davinci.h | 35 ++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/gpio-davinci.h b/include/linux/platform_data/gpio-davinci.h index 2fcc125af1aa..6efd20264585 100644 --- a/include/linux/platform_data/gpio-davinci.h +++ b/include/linux/platform_data/gpio-davinci.h @@ -16,10 +16,45 @@ #ifndef __DAVINCI_GPIO_PLATFORM_H #define __DAVINCI_GPIO_PLATFORM_H +#include +#include + +#include + +enum davinci_gpio_type { + GPIO_TYPE_TNETV107X = 0, +}; + struct davinci_gpio_platform_data { u32 ngpio; u32 gpio_unbanked; u32 intc_irq_num; }; + +struct davinci_gpio_controller { + struct gpio_chip chip; + int irq_base; + /* Serialize access to GPIO registers */ + spinlock_t lock; + void __iomem *regs; + void __iomem *set_data; + void __iomem *clr_data; + void __iomem *in_data; + int gpio_unbanked; + unsigned gpio_irq; +}; + +/* + * basic gpio routines + */ +#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */ + +/* Convert GPIO signal to GPIO pin number */ +#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio)) + +static inline u32 __gpio_mask(unsigned gpio) +{ + return 1 << (gpio % 32); +} #endif -- cgit v1.2.3 From 82b0f4b7c576d22c764239662cedc63c21f02d8d Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 17 Sep 2013 10:11:53 +0100 Subject: clk: ux500: Copy u8500_clk_init() ready for DT enablement Here we're using the old clock initialisation function as a template. It's necessary to remove all of the clk_register_clkdev() calls as they don't make sense when booting with Device Tree. Cc: Mike Turquette Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- include/linux/platform_data/clk-ux500.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/clk-ux500.h b/include/linux/platform_data/clk-ux500.h index 9d98f3aaa16c..97baf831e071 100644 --- a/include/linux/platform_data/clk-ux500.h +++ b/include/linux/platform_data/clk-ux500.h @@ -10,6 +10,9 @@ #ifndef __CLK_UX500_H #define __CLK_UX500_H +void u8500_of_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, + u32 clkrst5_base, u32 clkrst6_base); + void u8500_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, u32 clkrst5_base, u32 clkrst6_base); void u9540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, -- cgit v1.2.3 From ad93220de7da1f5bd8f9e4be1f1eeefba5eed0ad Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Fri, 13 Sep 2013 19:11:35 +0800 Subject: mmc: sdhci-esdhc-imx: change pinctrl state according to uhs mode Without proper pinctrl state, the card may not be able to work on high speed stablely. e.g. SDR104. This patch add pinctrl state switch code according to different uhs mode include 100mhz sate, 200mhz sate and normal state (50Mhz and below). Signed-off-by: Dong Aisheng Acked-by: Shawn Guo Signed-off-by: Chris Ball --- include/linux/platform_data/mmc-esdhc-imx.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/mmc-esdhc-imx.h b/include/linux/platform_data/mmc-esdhc-imx.h index d44912d81578..a0f5a8f9b3bc 100644 --- a/include/linux/platform_data/mmc-esdhc-imx.h +++ b/include/linux/platform_data/mmc-esdhc-imx.h @@ -10,6 +10,8 @@ #ifndef __ASM_ARCH_IMX_ESDHC_H #define __ASM_ARCH_IMX_ESDHC_H +#include + enum wp_types { ESDHC_WP_NONE, /* no WP, neither controller nor gpio */ ESDHC_WP_CONTROLLER, /* mmc controller internal WP */ @@ -32,6 +34,7 @@ enum cd_types { * @cd_gpio: gpio for card_detect interrupt * @wp_type: type of write_protect method (see wp_types enum above) * @cd_type: type of card_detect method (see cd_types enum above) + * @support_vsel: indicate it supports 1.8v switching */ struct esdhc_platform_data { @@ -41,5 +44,6 @@ struct esdhc_platform_data { enum cd_types cd_type; int max_bus_width; unsigned int f_max; + bool support_vsel; }; #endif /* __ASM_ARCH_IMX_ESDHC_H */ -- cgit v1.2.3 From 74227e65f9742f559f6e243ba2c9a983e1f1221d Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Tue, 17 Sep 2013 00:32:34 +0200 Subject: clk: nomadik: declare OF clock provider Common clock framework allows to register clock providers to get called on of_clk_init() by using CLK_OF_DECLARE. This converts nomadik clock provider to make use of it and get rid of the mach specific clk init call. As clocks require system reset controller base address to be initialized each clock driver checks src_base and calls new nomadik_src_init if required. Signed-off-by: Sebastian Hesselbarth Acked-by: Linus Walleij Acked-by: Mike Turquette --- include/linux/platform_data/clk-nomadik.h | 2 -- 1 file changed, 2 deletions(-) delete mode 100644 include/linux/platform_data/clk-nomadik.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/clk-nomadik.h b/include/linux/platform_data/clk-nomadik.h deleted file mode 100644 index 5713c87b2477..000000000000 --- a/include/linux/platform_data/clk-nomadik.h +++ /dev/null @@ -1,2 +0,0 @@ -/* Minimal platform data header */ -void nomadik_clk_init(void); -- cgit v1.2.3 From 25f73ed5c67d17ecf8cefd560f55211cce726086 Mon Sep 17 00:00:00 2001 From: Vivien Didelot Date: Fri, 27 Sep 2013 15:06:28 -0400 Subject: misc: (at24) move header to linux/platform_data/ This patch moves the at24.h header from include/linux/i2c to include/linux/platform_data and updates existing support accordingly. It also fixes the following checkpatch warning: WARNING: please, no space before tabs #436: FILE: include/linux/platform_data/at24.h:31: + * ^Iu8 *mac_addr = ethernet_pdata->mac_addr;$ Signed-off-by: Vivien Didelot Signed-off-by: Wolfram Sang --- include/linux/platform_data/at24.h | 55 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+) create mode 100644 include/linux/platform_data/at24.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/at24.h b/include/linux/platform_data/at24.h new file mode 100644 index 000000000000..c42aa89d34ee --- /dev/null +++ b/include/linux/platform_data/at24.h @@ -0,0 +1,55 @@ +/* + * at24.h - platform_data for the at24 (generic eeprom) driver + * (C) Copyright 2008 by Pengutronix + * (C) Copyright 2012 by Wolfram Sang + * same license as the driver + */ + +#ifndef _LINUX_AT24_H +#define _LINUX_AT24_H + +#include +#include + +/** + * struct at24_platform_data - data to set up at24 (generic eeprom) driver + * @byte_len: size of eeprom in byte + * @page_size: number of byte which can be written in one go + * @flags: tunable options, check AT24_FLAG_* defines + * @setup: an optional callback invoked after eeprom is probed; enables kernel + code to access eeprom via memory_accessor, see example + * @context: optional parameter passed to setup() + * + * If you set up a custom eeprom type, please double-check the parameters. + * Especially page_size needs extra care, as you risk data loss if your value + * is bigger than what the chip actually supports! + * + * An example in pseudo code for a setup() callback: + * + * void get_mac_addr(struct memory_accessor *mem_acc, void *context) + * { + * u8 *mac_addr = ethernet_pdata->mac_addr; + * off_t offset = context; + * + * // Read MAC addr from EEPROM + * if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN) + * pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr); + * } + * + * This function pointer and context can now be set up in at24_platform_data. + */ + +struct at24_platform_data { + u32 byte_len; /* size (sum of all addr) */ + u16 page_size; /* for writes */ + u8 flags; +#define AT24_FLAG_ADDR16 0x80 /* address pointer is 16 bit */ +#define AT24_FLAG_READONLY 0x40 /* sysfs-entry will be read-only */ +#define AT24_FLAG_IRUGO 0x20 /* sysfs-entry will be world-readable */ +#define AT24_FLAG_TAKE8ADDR 0x10 /* take always 8 addresses (24c00) */ + + void (*setup)(struct memory_accessor *, void *context); + void *context; +}; + +#endif /* _LINUX_AT24_H */ -- cgit v1.2.3 From ddeccb8d6b5bbe2c1e3a29f8c74b52f170c2207d Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Tue, 8 Oct 2013 06:42:10 +0900 Subject: dmaengine: add driver for Samsung s3c24xx SoCs This adds a new driver to support the s3c24xx dma using the dmaengine and makes the old one in mach-s3c24xx obsolete in the long run. Conceptually the s3c24xx-dma feels like a distant relative of the pl08x with numerous virtual channels being mapped to a lot less physical ones. The driver therefore borrows a lot from the amba-pl08x driver in this regard. Functionality-wise the driver gains a memcpy ability in addition to the slave_sg one. The driver supports both the method for requesting the peripheral used by SoCs before the S3C2443 and the different method for S3C2443 and later. On earlier SoCs the hardware channels usable for specific peripherals is constrainted while on later SoCs all channels can be used for any peripheral. Tested on a s3c2416-based board, memcpy using the dmatest module and slave_sg partially using the spi-s3c64xx driver. Signed-off-by: Heiko Stuebner Acked-by: Linus Walleij Acked-by: Vinod Koul Signed-off-by: Kukjin Kim --- include/linux/platform_data/dma-s3c24xx.h | 43 +++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 include/linux/platform_data/dma-s3c24xx.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/dma-s3c24xx.h b/include/linux/platform_data/dma-s3c24xx.h new file mode 100644 index 000000000000..5a0cfffe3bbb --- /dev/null +++ b/include/linux/platform_data/dma-s3c24xx.h @@ -0,0 +1,43 @@ +/* + * S3C24XX DMA handling + * + * Copyright (c) 2013 Heiko Stuebner + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +enum s3c24xx_dma_bus { + S3C24XX_DMA_APB, + S3C24XX_DMA_AHB, +}; + +/** + * @bus: on which bus does the peripheral reside - AHB or APB. + * @handshake: is a handshake with the peripheral necessary + * @chansel: channel selection information, depending on variant; reqsel for + * s3c2443 and later and channel-selection map for earlier SoCs + * see CHANSEL doc in s3c2443-dma.c + */ +struct s3c24xx_dma_channel { + enum s3c24xx_dma_bus bus; + bool handshake; + u16 chansel; +}; + +/** + * struct s3c24xx_dma_platdata - platform specific settings + * @num_phy_channels: number of physical channels + * @channels: array of virtual channel descriptions + * @num_channels: number of virtual channels + */ +struct s3c24xx_dma_platdata { + int num_phy_channels; + struct s3c24xx_dma_channel *channels; + int num_channels; +}; + +struct dma_chan; +bool s3c24xx_dma_filter(struct dma_chan *chan, void *param); -- cgit v1.2.3 From 5578b266e9ae05391d53b446acf23818256ff13f Mon Sep 17 00:00:00 2001 From: Valentine Barshak Date: Thu, 10 Oct 2013 20:35:17 +0400 Subject: usb: phy: Add RCAR Gen2 USB phy This adds RCAR Gen2 USB phy support. The driver configures USB channels 0/2 which are shared between PCI USB hosts and USBHS/USBSS devices. It also controls internal USBHS phy. Signed-off-by: Valentine Barshak Signed-off-by: Felipe Balbi --- include/linux/platform_data/usb-rcar-gen2-phy.h | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 include/linux/platform_data/usb-rcar-gen2-phy.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/usb-rcar-gen2-phy.h b/include/linux/platform_data/usb-rcar-gen2-phy.h new file mode 100644 index 000000000000..dd3ba46c0d90 --- /dev/null +++ b/include/linux/platform_data/usb-rcar-gen2-phy.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Cogent Embedded, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __USB_RCAR_GEN2_PHY_H +#define __USB_RCAR_GEN2_PHY_H + +#include + +struct rcar_gen2_phy_platform_data { + /* USB channel 0 configuration */ + bool chan0_pci:1; /* true: PCI USB host 0, false: USBHS */ + /* USB channel 2 configuration */ + bool chan2_pci:1; /* true: PCI USB host 2, false: USBSS */ +}; + +#endif -- cgit v1.2.3 From dc7743aa3c49fabbc6dc9edbcf7df74d776ac32e Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 2 Oct 2013 21:39:40 -0700 Subject: pinctrl: single: Add support for auxdata For omaps, we still have dependencies to the legacy code for handling the PRM (Power Reset Management) interrupts, and also for reconfiguring the io wake-up chain after changes. Let's pass the PRM interrupt and the rearm functions via auxdata. Then when at some point we have a proper PRM driver, we can get the interrupt via device tree and set up the rearm function as exported function in the PRM driver. By using auxdata we can remove a dependency to the wake-up events for converting omap3 to be device tree only. Cc: Peter Ujfalusi Cc: Grygorii Strashko Cc: Prakash Manjunathappa Cc: Roger Quadros Cc: Haojian Zhuang Cc: linux-kernel@vger.kernel.org Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman Acked-by: Linus Walleij Signed-off-by: Tony Lindgren --- include/linux/platform_data/pinctrl-single.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) create mode 100644 include/linux/platform_data/pinctrl-single.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/pinctrl-single.h b/include/linux/platform_data/pinctrl-single.h new file mode 100644 index 000000000000..72eacda9b360 --- /dev/null +++ b/include/linux/platform_data/pinctrl-single.h @@ -0,0 +1,12 @@ +/** + * irq: optional wake-up interrupt + * rearm: optional soc specific rearm function + * + * Note that the irq and rearm setup should come from device + * tree except for omap where there are still some dependencies + * to the legacy PRM code. + */ +struct pcs_pdata { + int irq; + void (*rearm)(void); +}; -- cgit v1.2.3 From 57ae1605c0f511bca212787d28d79a3f82c0a7f9 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Thu, 10 Oct 2013 16:41:19 +0900 Subject: USB: ehci-s5p: Remove non-DT support The non-DT for EXYNOS SoCs is not supported from v3.11. Thus, there is no need to support non-DT for Exynos EHCI driver. The 'include/linux/platform_data/usb-ehci-s5p.h' file has been used for non-DT support. Thus, the 'usb-ehci-s5p.h' file can be removed. Signed-off-by: Jingoo Han Signed-off-by: Greg Kroah-Hartman --- include/linux/platform_data/usb-ehci-s5p.h | 21 --------------------- 1 file changed, 21 deletions(-) delete mode 100644 include/linux/platform_data/usb-ehci-s5p.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/usb-ehci-s5p.h b/include/linux/platform_data/usb-ehci-s5p.h deleted file mode 100644 index 5f28cae18582..000000000000 --- a/include/linux/platform_data/usb-ehci-s5p.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics Co.Ltd - * Author: Joonyoung Shim - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __PLAT_SAMSUNG_EHCI_H -#define __PLAT_SAMSUNG_EHCI_H __FILE__ - -struct s5p_ehci_platdata { - int (*phy_init)(struct platform_device *pdev, int type); - int (*phy_exit)(struct platform_device *pdev, int type); -}; - -extern void s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd); - -#endif /* __PLAT_SAMSUNG_EHCI_H */ -- cgit v1.2.3 From c00809d330cfe42469fcd1cfd63f0690b47ea9bb Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Mon, 14 Oct 2013 09:18:54 +0900 Subject: USB: ohci-exynos: Remove non-DT support The non-DT for EXYNOS SoCs is not supported from v3.11. Thus, there is no need to support non-DT for Exynos OHCI driver. The 'include/linux/platform_data/usb-ohci-exynos.h' file has been used for non-DT support. Thus, the 'usb-ohci-exynos.h' file can be removed. Signed-off-by: Jingoo Han Signed-off-by: Greg Kroah-Hartman --- include/linux/platform_data/usb-ohci-exynos.h | 21 --------------------- 1 file changed, 21 deletions(-) delete mode 100644 include/linux/platform_data/usb-ohci-exynos.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/usb-ohci-exynos.h b/include/linux/platform_data/usb-ohci-exynos.h deleted file mode 100644 index c256c595be5e..000000000000 --- a/include/linux/platform_data/usb-ohci-exynos.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics Co.Ltd - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __MACH_EXYNOS_OHCI_H -#define __MACH_EXYNOS_OHCI_H - -struct exynos4_ohci_platdata { - int (*phy_init)(struct platform_device *pdev, int type); - int (*phy_exit)(struct platform_device *pdev, int type); -}; - -extern void exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd); - -#endif /* __MACH_EXYNOS_OHCI_H */ -- cgit v1.2.3 From f1468a2077e8c00fddb6cecec41b356637195ca3 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Wed, 16 Oct 2013 21:58:11 +0530 Subject: exynos4-is: Use the generic MIPI CSIS PHY driver Use the generic PHY API instead of the platform callback to control the MIPI CSIS DPHY. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Acked-by: Felipe Balbi Acked-by: Mauro Carvalho Chehab Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman --- include/linux/platform_data/mipi-csis.h | 9 --------- 1 file changed, 9 deletions(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/mipi-csis.h b/include/linux/platform_data/mipi-csis.h index bf34e17cee7f..c2fd9024717c 100644 --- a/include/linux/platform_data/mipi-csis.h +++ b/include/linux/platform_data/mipi-csis.h @@ -25,13 +25,4 @@ struct s5p_platform_mipi_csis { u8 hs_settle; }; -/** - * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control - * @id: MIPI-CSIS harware instance index (0...1) - * @on: true to enable D-PHY and deassert its reset - * false to disable D-PHY - * @return: 0 on success, or negative error code on failure - */ -int s5p_csis_phy_enable(int id, bool on); - #endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */ -- cgit v1.2.3 From 1fecf8958eb7f90791f2c7e99afac393b64fa976 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Mon, 21 Oct 2013 05:32:48 +0900 Subject: ARM: S3C24XX: add dma pdata for s3c2410, s3c2440 and s3c2442 s3c2410 and s3c2442 share the same dma channels while s3c2440 has slight differences. But on all three the reachable sources per dma channel has constraints attached and thus encodes the usable combinations using the S3C24XX_DMA_CHANREQ macro. This also fixes the warning about s3c2410_dma_resource being unused as reported by Olof Johansson. Reported-by: Olof Johansson Signed-off-by: Heiko Stuebner Reviewed-by: Tomasz Figa Signed-off-by: Kukjin Kim --- include/linux/platform_data/dma-s3c24xx.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/dma-s3c24xx.h b/include/linux/platform_data/dma-s3c24xx.h index 5a0cfffe3bbb..89ba1b0c90e4 100644 --- a/include/linux/platform_data/dma-s3c24xx.h +++ b/include/linux/platform_data/dma-s3c24xx.h @@ -9,6 +9,9 @@ * any later version. */ +/* Helper to encode the source selection constraints for early s3c socs. */ +#define S3C24XX_DMA_CHANREQ(src, chan) ((BIT(3) | src) << chan * 4) + enum s3c24xx_dma_bus { S3C24XX_DMA_APB, S3C24XX_DMA_AHB, -- cgit v1.2.3 From 602519b2bd63adfdf9e24b2f94aaddcfeb464e9e Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Fri, 18 Oct 2013 19:48:47 +0800 Subject: mmc: sdhci-esdhc-imx: add delay line setting support The DLL(Delay Line) is newly added to assist in sampling read data. The DLL provides the ability to programmatically select a quantized delay (in fractions of the clock period) regardless of on-chip variations such as process, voltage and temperature (PVT). This patch adds a user interface to set slave delay line via device tree. It's usually used in high speed mode like mmc DDR mode when the signal quality is not good caused by board design, e.g. the signal path is too long. User can manually set delay line to find a suitable data sampling window for card to work properly. Signed-off-by: Dong Aisheng Acked-by: Shawn Guo Signed-off-by: Chris Ball --- include/linux/platform_data/mmc-esdhc-imx.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/mmc-esdhc-imx.h b/include/linux/platform_data/mmc-esdhc-imx.h index a0f5a8f9b3bc..75f70f6ac137 100644 --- a/include/linux/platform_data/mmc-esdhc-imx.h +++ b/include/linux/platform_data/mmc-esdhc-imx.h @@ -45,5 +45,6 @@ struct esdhc_platform_data { int max_bus_width; unsigned int f_max; bool support_vsel; + unsigned int delay_line; }; #endif /* __ASM_ARCH_IMX_ESDHC_H */ -- cgit v1.2.3 From f65f0a1a9836abbfbe5c9b8fa0452e4d8eb7bf00 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sun, 15 Sep 2013 03:50:17 -0700 Subject: leds: lp55xx: enable setting default trigger This enables setting a default trigger on an LP55xx channel, either from platform data or device tree. This mechanism is identical to the mechanism for GPIO LEDs and references the common LEDs device tree bindings. Signed-off-by: Linus Walleij Tested-by: Milo Kim Acked-by: Milo Kim Signed-off-by: Bryan Wu --- include/linux/platform_data/leds-lp55xx.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/leds-lp55xx.h b/include/linux/platform_data/leds-lp55xx.h index 51a2ff579d60..c32de4dcec54 100644 --- a/include/linux/platform_data/leds-lp55xx.h +++ b/include/linux/platform_data/leds-lp55xx.h @@ -22,6 +22,7 @@ struct lp55xx_led_config { const char *name; + const char *default_trigger; u8 chan_nr; u8 led_current; /* mA x10, 0 if led is not connected */ u8 max_current; -- cgit v1.2.3 From bb6febdc90efe7f664328075c204eed8e9af7ec9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Maximilian=20G=C3=BCntner?= Date: Wed, 16 Oct 2013 18:09:17 -0700 Subject: leds: Added driver for the NXP PCA9685 I2C chip MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The NXP PCA9685 supports 16 channels/leds using a 12-bit PWM (4095 levels of brightness) This driver supports configuration using platform_data. Signed-off-by: Maximilian Güntner Signed-off-by: Bryan Wu --- include/linux/platform_data/leds-pca9685.h | 35 ++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) create mode 100644 include/linux/platform_data/leds-pca9685.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/leds-pca9685.h b/include/linux/platform_data/leds-pca9685.h new file mode 100644 index 000000000000..778e9e4249cc --- /dev/null +++ b/include/linux/platform_data/leds-pca9685.h @@ -0,0 +1,35 @@ +/* + * Copyright 2013 Maximilian Güntner + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * Based on leds-pca963x.h by Peter Meerwald + * + * LED driver for the NXP PCA9685 PWM chip + * + */ + +#ifndef __LINUX_PCA9685_H +#define __LINUX_PCA9685_H + +#include + +enum pca9685_outdrv { + PCA9685_OPEN_DRAIN, + PCA9685_TOTEM_POLE, +}; + +enum pca9685_inverted { + PCA9685_NOT_INVERTED, + PCA9685_INVERTED, +}; + +struct pca9685_platform_data { + struct led_platform_data leds; + enum pca9685_outdrv outdrv; + enum pca9685_inverted inverted; +}; + +#endif /* __LINUX_PCA9685_H */ -- cgit v1.2.3 From 30dae2f98612d7c8cd855861b9de205ebd9ef4fa Mon Sep 17 00:00:00 2001 From: Sebastian Reichel Date: Tue, 22 Oct 2013 11:02:56 -0700 Subject: leds: lp55xx: handle enable pin in driver This patch moves the handling of the chip's enable pin from the board code into the driver. It also updates all board-code files using the driver to incorporate this change. This is needed for device tree support of the enable pin. Signed-off-by: Sebastian Reichel Acked-by: Linus Walleij Acked-by: Tony Lindgren Signed-off-by: Bryan Wu --- include/linux/platform_data/leds-lp55xx.h | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/leds-lp55xx.h b/include/linux/platform_data/leds-lp55xx.h index c32de4dcec54..624ff9edad6f 100644 --- a/include/linux/platform_data/leds-lp55xx.h +++ b/include/linux/platform_data/leds-lp55xx.h @@ -67,10 +67,8 @@ struct lp55xx_platform_data { /* Clock configuration */ u8 clock_mode; - /* Platform specific functions */ - int (*setup_resources)(void); - void (*release_resources)(void); - void (*enable)(bool state); + /* optional enable GPIO */ + int enable_gpio; /* Predefined pattern data */ struct lp55xx_predef_pattern *patterns; -- cgit v1.2.3 From db60d8da8f643586c95f8fc3e383954f8c57f1f3 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Wed, 30 Oct 2013 18:22:30 +0530 Subject: dmanengine: fix edma driver to not define DMA_COMPLETE edma header defines DMA_COMPLETE, this causes issues as commit adfedd9a32e4 move DMA_SUCCESS to DMA_COMPLETE. edma should properly namespace its defines and needs a future fix Reported-by: Olof Johansson Signed-off-by: Vinod Koul --- include/linux/platform_data/edma.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h index 179fb91bb5f2..f50821cb64be 100644 --- a/include/linux/platform_data/edma.h +++ b/include/linux/platform_data/edma.h @@ -67,10 +67,10 @@ struct edmacc_param { #define ITCCHEN BIT(23) /*ch_status paramater of callback function possible values*/ -#define DMA_COMPLETE 1 -#define DMA_CC_ERROR 2 -#define DMA_TC1_ERROR 3 -#define DMA_TC2_ERROR 4 +#define EDMA_DMA_COMPLETE 1 +#define EDMA_DMA_CC_ERROR 2 +#define EDMA_DMA_TC1_ERROR 3 +#define EDMA_DMA_TC2_ERROR 4 enum address_mode { INCR = 0, -- cgit v1.2.3 From c6d81bd7237b5785080087bcf796ce456ef69557 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Heiko=20St=C3=BCbner?= Date: Thu, 31 Oct 2013 01:25:32 -0700 Subject: Input: add driver for Neonode zForce based touchscreens This adds a driver for touchscreens using the zforce infrared technology from Neonode connected via i2c to the host system. It supports multitouch with up to two fingers and tracking of the contacts in hardware. Signed-off-by: Heiko Stuebner Signed-off-by: Dmitry Torokhov --- include/linux/platform_data/zforce_ts.h | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 include/linux/platform_data/zforce_ts.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/zforce_ts.h b/include/linux/platform_data/zforce_ts.h new file mode 100644 index 000000000000..0472ab2f6ede --- /dev/null +++ b/include/linux/platform_data/zforce_ts.h @@ -0,0 +1,26 @@ +/* drivers/input/touchscreen/zforce.c + * + * Copyright (C) 2012-2013 MundoReader S.L. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _LINUX_INPUT_ZFORCE_TS_H +#define _LINUX_INPUT_ZFORCE_TS_H + +struct zforce_ts_platdata { + int gpio_int; + int gpio_rst; + + unsigned int x_max; + unsigned int y_max; +}; + +#endif /* _LINUX_INPUT_ZFORCE_TS_H */ -- cgit v1.2.3 From ac65caf514ec3e55e8d3d510ee37f80dd97418fe Mon Sep 17 00:00:00 2001 From: Pekon Gupta Date: Thu, 24 Oct 2013 18:20:17 +0530 Subject: ARM: OMAP2+: cleaned-up DT support of various ECC schemes OMAP NAND driver support multiple ECC scheme, which can used in different flavours, depending on in-build Hardware engines present on SoC. This patch updates following in DT bindings related to sectionion of ecc-schemes - ti,elm-id: replaces elm_id (maintains backward compatibility) - ti,nand-ecc-opts: selection of h/w or s/w implementation of an ecc-scheme depends on ti,elm-id. (supported values ham1, bch4, and bch8) - maintain backward compatibility to deprecated DT bindings (sw, hw, hw-romcode) Below table shows different flavours of ecc-schemes supported by OMAP devices +---------------------------------------+---------------+---------------+ | ECC scheme |ECC calculation|Error detection| +---------------------------------------+---------------+---------------+ |OMAP_ECC_HAM1_CODE_HW |H/W (GPMC) |S/W | +---------------------------------------+---------------+---------------+ |OMAP_ECC_BCH8_CODE_HW_DETECTION_SW |H/W (GPMC) |S/W | |(requires CONFIG_MTD_NAND_ECC_BCH) | | | +---------------------------------------+---------------+---------------+ |OMAP_ECC_BCH8_CODE_HW |H/W (GPMC) |H/W (ELM) | |(requires CONFIG_MTD_NAND_OMAP_BCH && | | | | ti,elm-id in DT) | | | +---------------------------------------+---------------+---------------+ To optimize footprint of omap2-nand driver, selection of some ECC schemes also require enabling following Kconfigs, in addition to setting appropriate DT bindings - Kconfig:CONFIG_MTD_NAND_ECC_BCH error detection done in software - Kconfig:CONFIG_MTD_NAND_OMAP_BCH error detection done by h/w engine Signed-off-by: Pekon Gupta Reviewed-by: Felipe Balbi Acked-by: Tony Lindgren Tested-by: Ezequiel Garcia Signed-off-by: Brian Norris --- include/linux/platform_data/mtd-nand-omap2.h | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h index 6bf9ef43ddb1..e4128f1510bf 100644 --- a/include/linux/platform_data/mtd-nand-omap2.h +++ b/include/linux/platform_data/mtd-nand-omap2.h @@ -28,8 +28,16 @@ enum omap_ecc { OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */ /* 1-bit ecc: stored at beginning of spare area as romcode */ OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */ - OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */ - OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */ + /* 1-bit ECC calculation by GPMC, Error detection by Software */ + OMAP_ECC_HAM1_CODE_HW, + /* 4-bit ECC calculation by GPMC, Error detection by Software */ + OMAP_ECC_BCH4_CODE_HW_DETECTION_SW, + /* 4-bit ECC calculation by GPMC, Error detection by ELM */ + OMAP_ECC_BCH4_CODE_HW, + /* 8-bit ECC calculation by GPMC, Error detection by Software */ + OMAP_ECC_BCH8_CODE_HW_DETECTION_SW, + /* 8-bit ECC calculation by GPMC, Error detection by ELM */ + OMAP_ECC_BCH8_CODE_HW, }; struct gpmc_nand_regs { @@ -63,5 +71,6 @@ struct omap_nand_platform_data { /* for passing the partitions */ struct device_node *of_node; + struct device_node *elm_of_node; }; #endif -- cgit v1.2.3 From c66d039197e42af8867e5d0d9b904daf0fb9e6bc Mon Sep 17 00:00:00 2001 From: Pekon Gupta Date: Thu, 24 Oct 2013 18:20:18 +0530 Subject: mtd: nand: omap: combine different flavours of 1-bit hamming ecc schemes OMAP NAND driver currently supports multiple flavours of 1-bit Hamming ecc-scheme, like: - OMAP_ECC_HAMMING_CODE_DEFAULT 1-bit hamming ecc code using software library - OMAP_ECC_HAMMING_CODE_HW 1-bit hamming ecc-code using GPMC h/w engine - OMAP_ECC_HAMMING_CODE_HW_ROMCODE 1-bit hamming ecc-code using GPMC h/w engin with ecc-layout compatible to ROM code. This patch combines above multiple ecc-schemes into single implementation: - OMAP_ECC_HAM1_CODE_HW 1-bit hamming ecc-code using GPMC h/w engine with ROM-code compatible ecc-layout. Signed-off-by: Pekon Gupta Reviewed-by: Felipe Balbi Acked-by: Tony Lindgren Tested-by: Ezequiel Garcia Signed-off-by: Brian Norris --- include/linux/platform_data/mtd-nand-omap2.h | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h index e4128f1510bf..4da5bfa2147f 100644 --- a/include/linux/platform_data/mtd-nand-omap2.h +++ b/include/linux/platform_data/mtd-nand-omap2.h @@ -23,13 +23,8 @@ enum nand_io { }; enum omap_ecc { - /* 1-bit ecc: stored at end of spare area */ - OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */ - OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */ - /* 1-bit ecc: stored at beginning of spare area as romcode */ - OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */ /* 1-bit ECC calculation by GPMC, Error detection by Software */ - OMAP_ECC_HAM1_CODE_HW, + OMAP_ECC_HAM1_CODE_HW = 0, /* 4-bit ECC calculation by GPMC, Error detection by Software */ OMAP_ECC_BCH4_CODE_HW_DETECTION_SW, /* 4-bit ECC calculation by GPMC, Error detection by ELM */ -- cgit v1.2.3 From 5812c13a4e636da4bd7f7cabbbbc59d9dbf3c86c Mon Sep 17 00:00:00 2001 From: Milo Kim Date: Tue, 12 Nov 2013 15:08:57 -0800 Subject: backlight: lp855x_bl: support new LP8555 device LP8555 is one of the LP855x family devices. This device needs pre_init_device() and post_init_device() driver structure. It's same as LP8557, so the device configuration code is shared with LP8557. Backlight outputs are generated from dual DC-DC boost converters. It's configurable EPROM settings which are defined in the platform data. Driver documentation and device tree bindings are updated. Signed-off-by: Milo Kim Signed-off-by: Jingoo Han Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/platform_data/lp855x.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h index ea3200527dd3..1b2ba24e4e03 100644 --- a/include/linux/platform_data/lp855x.h +++ b/include/linux/platform_data/lp855x.h @@ -40,6 +40,17 @@ #define LP8553_PWM_CONFIG LP8550_PWM_CONFIG #define LP8553_I2C_CONFIG LP8550_I2C_CONFIG +/* CONFIG register - LP8555 */ +#define LP8555_PWM_STANDBY BIT(7) +#define LP8555_PWM_FILTER BIT(6) +#define LP8555_RELOAD_EPROM BIT(3) /* use it if EPROMs should be reset + when the backlight turns on */ +#define LP8555_OFF_OPENLEDS BIT(2) +#define LP8555_PWM_CONFIG LP8555_PWM_ONLY +#define LP8555_I2C_CONFIG LP8555_I2C_ONLY +#define LP8555_COMB1_CONFIG LP8555_COMBINED1 +#define LP8555_COMB2_CONFIG LP8555_COMBINED2 + /* DEVICE CONTROL register - LP8556 */ #define LP8556_PWM_CONFIG (LP8556_PWM_ONLY << BRT_MODE_SHFT) #define LP8556_COMB1_CONFIG (LP8556_COMBINED1 << BRT_MODE_SHFT) @@ -65,6 +76,7 @@ enum lp855x_chip_id { LP8551, LP8552, LP8553, + LP8555, LP8556, LP8557, }; @@ -89,6 +101,13 @@ enum lp8553_brighntess_source { LP8553_I2C_ONLY = LP8550_I2C_ONLY, }; +enum lp8555_brightness_source { + LP8555_PWM_ONLY, + LP8555_I2C_ONLY, + LP8555_COMBINED1, /* Brightness register with shaped PWM */ + LP8555_COMBINED2, /* PWM with shaped brightness register */ +}; + enum lp8556_brightness_source { LP8556_PWM_ONLY, LP8556_COMBINED1, /* pwm + i2c before the shaper block */ -- cgit v1.2.3 From 28e64a68a2ef1c48f30e8b6803725199929069fc Mon Sep 17 00:00:00 2001 From: Daniel Jeong Date: Tue, 12 Nov 2013 15:08:58 -0800 Subject: backlight: lm3630: apply chip revision The LM3630 chip was revised by TI and chip name was also changed to LM3630A. And register map, default values and initial sequences are changed. The files, lm3630_bl.{c,h} are replaced by lm3630a_bl.{c,h} You can find more information about LM3630A(datasheet, evm etc) at http://www.ti.com/product/lm3630a Signed-off-by: Daniel Jeong Signed-off-by: Jingoo Han Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/platform_data/lm3630_bl.h | 57 ---------------------------- include/linux/platform_data/lm3630a_bl.h | 65 ++++++++++++++++++++++++++++++++ 2 files changed, 65 insertions(+), 57 deletions(-) delete mode 100644 include/linux/platform_data/lm3630_bl.h create mode 100644 include/linux/platform_data/lm3630a_bl.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/lm3630_bl.h b/include/linux/platform_data/lm3630_bl.h deleted file mode 100644 index 9176dd3f2d63..000000000000 --- a/include/linux/platform_data/lm3630_bl.h +++ /dev/null @@ -1,57 +0,0 @@ -/* -* Simple driver for Texas Instruments LM3630 LED Flash driver chip -* Copyright (C) 2012 Texas Instruments -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License version 2 as -* published by the Free Software Foundation. -* -*/ - -#ifndef __LINUX_LM3630_H -#define __LINUX_LM3630_H - -#define LM3630_NAME "lm3630_bl" - -enum lm3630_pwm_ctrl { - PWM_CTRL_DISABLE = 0, - PWM_CTRL_BANK_A, - PWM_CTRL_BANK_B, - PWM_CTRL_BANK_ALL, -}; - -enum lm3630_pwm_active { - PWM_ACTIVE_HIGH = 0, - PWM_ACTIVE_LOW, -}; - -enum lm3630_bank_a_ctrl { - BANK_A_CTRL_DISABLE = 0x0, - BANK_A_CTRL_LED1 = 0x4, - BANK_A_CTRL_LED2 = 0x1, - BANK_A_CTRL_ALL = 0x5, -}; - -enum lm3630_bank_b_ctrl { - BANK_B_CTRL_DISABLE = 0, - BANK_B_CTRL_LED2, -}; - -struct lm3630_platform_data { - - /* maximum brightness */ - int max_brt_led1; - int max_brt_led2; - - /* initial on brightness */ - int init_brt_led1; - int init_brt_led2; - enum lm3630_pwm_ctrl pwm_ctrl; - enum lm3630_pwm_active pwm_active; - enum lm3630_bank_a_ctrl bank_a_ctrl; - enum lm3630_bank_b_ctrl bank_b_ctrl; - unsigned int pwm_period; - void (*pwm_set_intensity) (int brightness, int max_brightness); -}; - -#endif /* __LINUX_LM3630_H */ diff --git a/include/linux/platform_data/lm3630a_bl.h b/include/linux/platform_data/lm3630a_bl.h new file mode 100644 index 000000000000..7538e38e270b --- /dev/null +++ b/include/linux/platform_data/lm3630a_bl.h @@ -0,0 +1,65 @@ +/* +* Simple driver for Texas Instruments LM3630A LED Flash driver chip +* Copyright (C) 2012 Texas Instruments +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +* +*/ + +#ifndef __LINUX_LM3630A_H +#define __LINUX_LM3630A_H + +#define LM3630A_NAME "lm3630a_bl" + +enum lm3630a_pwm_ctrl { + LM3630A_PWM_DISABLE = 0x00, + LM3630A_PWM_BANK_A, + LM3630A_PWM_BANK_B, + LM3630A_PWM_BANK_ALL, + LM3630A_PWM_BANK_A_ACT_LOW = 0x05, + LM3630A_PWM_BANK_B_ACT_LOW, + LM3630A_PWM_BANK_ALL_ACT_LOW, +}; + +enum lm3630a_leda_ctrl { + LM3630A_LEDA_DISABLE = 0x00, + LM3630A_LEDA_ENABLE = 0x04, + LM3630A_LEDA_ENABLE_LINEAR = 0x14, +}; + +enum lm3630a_ledb_ctrl { + LM3630A_LEDB_DISABLE = 0x00, + LM3630A_LEDB_ON_A = 0x01, + LM3630A_LEDB_ENABLE = 0x02, + LM3630A_LEDB_ENABLE_LINEAR = 0x0A, +}; + +#define LM3630A_MAX_BRIGHTNESS 255 +/* + *@leda_init_brt : led a init brightness. 4~255 + *@leda_max_brt : led a max brightness. 4~255 + *@leda_ctrl : led a disable, enable linear, enable exponential + *@ledb_init_brt : led b init brightness. 4~255 + *@ledb_max_brt : led b max brightness. 4~255 + *@ledb_ctrl : led b disable, enable linear, enable exponential + *@pwm_period : pwm period + *@pwm_ctrl : pwm disable, bank a or b, active high or low + */ +struct lm3630a_platform_data { + + /* led a config. */ + int leda_init_brt; + int leda_max_brt; + enum lm3630a_leda_ctrl leda_ctrl; + /* led b config. */ + int ledb_init_brt; + int ledb_max_brt; + enum lm3630a_ledb_ctrl ledb_ctrl; + /* pwm config. */ + unsigned int pwm_period; + enum lm3630a_pwm_ctrl pwm_ctrl; +}; + +#endif /* __LINUX_LM3630A_H */ -- cgit v1.2.3