From 4065d1e7b2164cff4af57b58fac887df2fe75d2a Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 31 Jan 2012 00:18:00 -0800 Subject: Input: add Cypress TTSP capacitive multi-touch screen support Cypress TrueTouch(tm) Standard Product controllers are found in a wide range of embedded devices. This driver add support for a variety of TTSP controllers. Since the hardware is capable of tracking identifiable contacts, multi-touch protocol type B (stateful) is used to report contact information. The driver is composed of a core driver that process the data sent by the contacts and a set of bus specific interface modules. This patch adds the base core TTSP driver. Signed-off-by: Javier Martinez Canillas Reviewed-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov --- include/linux/input/cyttsp.h | 58 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+) create mode 100644 include/linux/input/cyttsp.h (limited to 'include/linux/input') diff --git a/include/linux/input/cyttsp.h b/include/linux/input/cyttsp.h new file mode 100644 index 000000000000..5af7c66f1fca --- /dev/null +++ b/include/linux/input/cyttsp.h @@ -0,0 +1,58 @@ +/* + * Header file for: + * Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen drivers. + * For use with Cypress Txx3xx parts. + * Supported parts include: + * CY8CTST341 + * CY8CTMA340 + * + * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc. + * Copyright (C) 2012 Javier Martinez Canillas + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2, and only version 2, as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Contact Cypress Semiconductor at www.cypress.com (kev@cypress.com) + * + */ +#ifndef _CYTTSP_H_ +#define _CYTTSP_H_ + +#define CY_SPI_NAME "cyttsp-spi" +#define CY_I2C_NAME "cyttsp-i2c" +/* Active Power state scanning/processing refresh interval */ +#define CY_ACT_INTRVL_DFLT 0x00 /* ms */ +/* touch timeout for the Active power */ +#define CY_TCH_TMOUT_DFLT 0xFF /* ms */ +/* Low Power state scanning/processing refresh interval */ +#define CY_LP_INTRVL_DFLT 0x0A /* ms */ +/* Active distance in pixels for a gesture to be reported */ +#define CY_ACT_DIST_DFLT 0xF8 /* pixels */ + +struct cyttsp_platform_data { + u32 maxx; + u32 maxy; + bool use_hndshk; + u8 act_dist; /* Active distance */ + u8 act_intrvl; /* Active refresh interval; ms */ + u8 tch_tmout; /* Active touch timeout; ms */ + u8 lp_intrvl; /* Low power refresh interval; ms */ + int (*init)(void); + void (*exit)(void); + char *name; + s16 irq_gpio; + u8 *bl_keys; +}; + +#endif /* _CYTTSP_H_ */ -- cgit v1.2.3 From b89529a10c954f14191367355da2a6053c49abb9 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Thu, 12 Jan 2012 19:40:34 +0100 Subject: Input: Use accessor for MT values The current MT accessor function does not distinguish between the MT values and the slot specification event. Add an accessor function for the values only, and use it where appropriate. Signed-off-by: Henrik Rydberg --- include/linux/input/mt.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'include/linux/input') diff --git a/include/linux/input/mt.h b/include/linux/input/mt.h index 318bb82325a6..f86737586e19 100644 --- a/include/linux/input/mt.h +++ b/include/linux/input/mt.h @@ -48,10 +48,14 @@ static inline void input_mt_slot(struct input_dev *dev, int slot) input_event(dev, EV_ABS, ABS_MT_SLOT, slot); } +static inline bool input_is_mt_value(int axis) +{ + return axis >= ABS_MT_FIRST && axis <= ABS_MT_LAST; +} + static inline bool input_is_mt_axis(int axis) { - return axis == ABS_MT_SLOT || - (axis >= ABS_MT_FIRST && axis <= ABS_MT_LAST); + return axis == ABS_MT_SLOT || input_is_mt_value(axis); } void input_mt_report_slot_state(struct input_dev *dev, -- cgit v1.2.3 From 1b8be32e6914ed862a5ce460c0a0b418ba85d2b7 Mon Sep 17 00:00:00 2001 From: Rachna Patil Date: Sun, 4 Mar 2012 08:11:57 -0800 Subject: Input: add support for TI Touchscreen controller This patch adds support for TI's touchscreen controller for a 4/5/8 wire resistive panel that is directly fed to the ADC. This touchscreen controller will be part of AM335x TI SoC. The TRM can be found at: http://www.ti.com/lit/ug/spruh73a/spruh73a.pdf Signed-off-by: Patil, Rachna Signed-off-by: Dmitry Torokhov --- include/linux/input/ti_tscadc.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 include/linux/input/ti_tscadc.h (limited to 'include/linux/input') diff --git a/include/linux/input/ti_tscadc.h b/include/linux/input/ti_tscadc.h new file mode 100644 index 000000000000..b10a527a92a4 --- /dev/null +++ b/include/linux/input/ti_tscadc.h @@ -0,0 +1,17 @@ +#ifndef __LINUX_TI_TSCADC_H +#define __LINUX_TI_TSCADC_H + +/** + * struct tsc_data Touchscreen wire configuration + * @wires: Wires refer to application modes + * i.e. 4/5/8 wire touchscreen support + * on the platform. + * @x_plate_resistance: X plate resistance. + */ + +struct tsc_data { + int wires; + int x_plate_resistance; +}; + +#endif -- cgit v1.2.3 From 2cd36877ad1c61429e00c099b6903ebcd936ca00 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Tue, 13 Mar 2012 21:35:51 -0700 Subject: Input: of_keymap - add device tree bindings for simple key matrices This adds a simple device tree binding for simple key matrix data and a helper to fill in the platform data. Signed-off-by: Olof Johansson Acked-by: Stephen Warren Signed-off-by: Dmitry Torokhov --- include/linux/input/matrix_keypad.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'include/linux/input') diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h index fe7c4b9ae270..6c07ced0af81 100644 --- a/include/linux/input/matrix_keypad.h +++ b/include/linux/input/matrix_keypad.h @@ -3,6 +3,7 @@ #include #include +#include #define MATRIX_MAX_ROWS 32 #define MATRIX_MAX_COLS 32 @@ -106,4 +107,22 @@ matrix_keypad_build_keymap(const struct matrix_keymap_data *keymap_data, __clear_bit(KEY_RESERVED, keybit); } +#ifdef CONFIG_INPUT_OF_MATRIX_KEYMAP +struct matrix_keymap_data * +matrix_keyboard_of_fill_keymap(struct device_node *np, const char *propname); + +void matrix_keyboard_of_free_keymap(const struct matrix_keymap_data *kd); +#else +static inline struct matrix_keymap_data * +matrix_keyboard_of_fill_keymap(struct device_node *np, const char *propname) +{ + return NULL; +} + +static inline void +matrix_keyboard_of_free_keymap(const struct matrix_keymap_data *kd) +{ +} +#endif + #endif /* _MATRIX_KEYPAD_H */ -- cgit v1.2.3 From 043916608c4b309e98a1650520ed4e88ec5e9123 Mon Sep 17 00:00:00 2001 From: Christopher Hudson Date: Fri, 16 Mar 2012 22:47:47 -0700 Subject: Input: kxtj9 - who_am_i check value and initial data rate fixes Several fixes based on customer feedback: * WHO_AM_I value has changed since preliminary parts used for initial testing; * Output of le16_to_cpu must be saved to memory before shifting to preserve sign; * Initial data rate was not extracted from data control register init. This was causing the initial data rate to be set to maximum until it was changed. To fix this problem, it made more sense to specify initial data rate and extract the register mask from that. Signed-off-by: Chris Hudson Signed-off-by: Dmitry Torokhov --- include/linux/input/kxtj9.h | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) (limited to 'include/linux/input') diff --git a/include/linux/input/kxtj9.h b/include/linux/input/kxtj9.h index f6bac89537b8..d415579b56fe 100644 --- a/include/linux/input/kxtj9.h +++ b/include/linux/input/kxtj9.h @@ -24,6 +24,7 @@ struct kxtj9_platform_data { unsigned int min_interval; /* minimum poll interval (in milli-seconds) */ + unsigned int init_interval; /* initial poll interval (in milli-seconds) */ /* * By default, x is axis 0, y is axis 1, z is axis 2; these can be @@ -52,16 +53,6 @@ struct kxtj9_platform_data { #define KXTJ9_G_8G (1 << 4) u8 g_range; - /* DATA_CTRL_REG: controls the output data rate of the part */ - #define ODR12_5F 0 - #define ODR25F 1 - #define ODR50F 2 - #define ODR100F 3 - #define ODR200F 4 - #define ODR400F 5 - #define ODR800F 6 - u8 data_odr_init; - int (*init)(void); void (*exit)(void); int (*power_on)(void); -- cgit v1.2.3 From 5c6a7a62c130afef3d61c1dee153012231ff5cd9 Mon Sep 17 00:00:00 2001 From: Olivier Sobrie Date: Fri, 16 Mar 2012 23:57:09 -0700 Subject: Input: ili210x - add support for Ilitek ILI210x based touchscreens The driver supports chipsets ILI2102, ILI2102s, ILI2103, ILI2103s and ILI2105. Such kind of controllers can be found in Amazon Kindle Fire devices. Reviewed-by: Jan Paesmans Reviewed-by: Henrik Rydberg Signed-off-by: Olivier Sobrie Signed-off-by: Dmitry Torokhov --- include/linux/input/ili210x.h | 10 ++++++++++ 1 file changed, 10 insertions(+) create mode 100644 include/linux/input/ili210x.h (limited to 'include/linux/input') diff --git a/include/linux/input/ili210x.h b/include/linux/input/ili210x.h new file mode 100644 index 000000000000..a5471245a13c --- /dev/null +++ b/include/linux/input/ili210x.h @@ -0,0 +1,10 @@ +#ifndef _ILI210X_H +#define _ILI210X_H + +struct ili210x_platform_data { + unsigned long irq_flags; + unsigned int poll_period; + bool (*get_pendown_state)(void); +}; + +#endif -- cgit v1.2.3