From e8e70d83912b40c5c9ea7b85a6110b9925fbed62 Mon Sep 17 00:00:00 2001 From: Chris Hudson Date: Wed, 6 Jul 2011 18:36:51 -0700 Subject: Input: add support for Kionix KXTJ9 accelerometer Signed-off-by: Chris Hudson Signed-off-by: Dmitry Torokhov --- include/linux/input/kxtj9.h | 70 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 70 insertions(+) create mode 100644 include/linux/input/kxtj9.h (limited to 'include/linux/input') diff --git a/include/linux/input/kxtj9.h b/include/linux/input/kxtj9.h new file mode 100644 index 000000000000..f6bac89537b8 --- /dev/null +++ b/include/linux/input/kxtj9.h @@ -0,0 +1,70 @@ +/* + * Copyright (C) 2011 Kionix, Inc. + * Written by Chris Hudson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307, USA + */ + +#ifndef __KXTJ9_H__ +#define __KXTJ9_H__ + +#define KXTJ9_I2C_ADDR 0x0F + +struct kxtj9_platform_data { + unsigned int min_interval; /* minimum poll interval (in milli-seconds) */ + + /* + * By default, x is axis 0, y is axis 1, z is axis 2; these can be + * changed to account for sensor orientation within the host device. + */ + u8 axis_map_x; + u8 axis_map_y; + u8 axis_map_z; + + /* + * Each axis can be negated to account for sensor orientation within + * the host device. + */ + bool negate_x; + bool negate_y; + bool negate_z; + + /* CTRL_REG1: set resolution, g-range, data ready enable */ + /* Output resolution: 8-bit valid or 12-bit valid */ + #define RES_8BIT 0 + #define RES_12BIT (1 << 6) + u8 res_12bit; + /* Output g-range: +/-2g, 4g, or 8g */ + #define KXTJ9_G_2G 0 + #define KXTJ9_G_4G (1 << 3) + #define KXTJ9_G_8G (1 << 4) + u8 g_range; + + /* DATA_CTRL_REG: controls the output data rate of the part */ + #define ODR12_5F 0 + #define ODR25F 1 + #define ODR50F 2 + #define ODR100F 3 + #define ODR200F 4 + #define ODR400F 5 + #define ODR800F 6 + u8 data_odr_init; + + int (*init)(void); + void (*exit)(void); + int (*power_on)(void); + int (*power_off)(void); +}; +#endif /* __KXTJ9_H__ */ -- cgit v1.2.3 From 5eb9f900e5b524682ace6771529826c4ce26b6ea Mon Sep 17 00:00:00 2001 From: Michael Tandy Date: Tue, 20 Sep 2011 22:42:51 -0700 Subject: Input: adxl34x - documentation cleanup This patch clarifies a few bits of documentation in the header file for the adxl34x driver. Signed-off-by: Michael Tandy Acked-by: Michael Hennerich Signed-off-by: Dmitry Torokhov --- include/linux/input/adxl34x.h | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) (limited to 'include/linux/input') diff --git a/include/linux/input/adxl34x.h b/include/linux/input/adxl34x.h index df00d998a44a..57e01a7cb006 100644 --- a/include/linux/input/adxl34x.h +++ b/include/linux/input/adxl34x.h @@ -30,8 +30,9 @@ struct adxl34x_platform_data { * Y, or Z participation in Tap detection. A '0' excludes the * selected axis from participation in Tap detection. * Setting the SUPPRESS bit suppresses Double Tap detection if - * acceleration greater than tap_threshold is present between - * taps. + * acceleration greater than tap_threshold is present during the + * tap_latency period, i.e. after the first tap but before the + * opening of the second tap window. */ #define ADXL_SUPPRESS (1 << 3) @@ -226,13 +227,13 @@ struct adxl34x_platform_data { * detection will begin and prevent the detection of activity. This * bit serially links the activity and inactivity functions. When '0' * the inactivity and activity functions are concurrent. Additional - * information can be found in the Application section under Link - * Mode. + * information can be found in the ADXL34x datasheet's Application + * section under Link Mode. * AUTO_SLEEP: A '1' sets the ADXL34x to switch to Sleep Mode * when inactivity (acceleration has been below inactivity_threshold * for at least inactivity_time) is detected and the LINK bit is set. - * A '0' disables automatic switching to Sleep Mode. See SLEEP - * for further description. + * A '0' disables automatic switching to Sleep Mode. See the + * Sleep Bit section of the ADXL34x datasheet for more information. */ #define ADXL_LINK (1 << 5) @@ -266,6 +267,12 @@ struct adxl34x_platform_data { u8 watermark; + /* + * When acceleration measurements are received from the ADXL34x + * events are sent to the event subsystem. The following settings + * select the event type and event code for new x, y and z axis data + * respectively. + */ u32 ev_type; /* EV_ABS or EV_REL */ u32 ev_code_x; /* ABS_X,Y,Z or REL_X,Y,Z */ @@ -289,7 +296,7 @@ struct adxl34x_platform_data { u32 ev_code_act_inactivity; /* EV_KEY */ /* - * Use ADXL34x INT2 instead of INT1 + * Use ADXL34x INT2 pin instead of INT1 pin for interrupt output */ u8 use_int2; -- cgit v1.2.3 From 3f48e7354358519e5b93f7f755ec270b3f8eafa0 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 18 Oct 2011 21:12:39 -0700 Subject: Input: adp5589-keys - add support for the ADP5585 derivatives The ADP5585 family keypad decoder and IO expander is similar to the ADP5589, however it features less IO pins, and lacks hardware assisted key-lock functionality. Unfortunately the register addresses are different, as well as the event codes and bit organization within the port related registers. Move ADP5589 Register defines from the header file into the main source file. Add new defines while making sure we don't break existing platform_data. Add register address translation, and turn device specific defines into variables. Introduce some helper functions and disable functions that doesn't exist on the added devices. Signed-off-by: Michael Hennerich Signed-off-by: Dmitry Torokhov --- include/linux/input/adp5589.h | 157 ++++++++++++++++++------------------------ 1 file changed, 66 insertions(+), 91 deletions(-) (limited to 'include/linux/input') diff --git a/include/linux/input/adp5589.h b/include/linux/input/adp5589.h index ef792ecfaabf..1a05eee15e67 100644 --- a/include/linux/input/adp5589.h +++ b/include/linux/input/adp5589.h @@ -1,5 +1,5 @@ /* - * Analog Devices ADP5589 I/O Expander and QWERTY Keypad Controller + * Analog Devices ADP5589/ADP5585 I/O Expander and QWERTY Keypad Controller * * Copyright 2010-2011 Analog Devices Inc. * @@ -9,89 +9,9 @@ #ifndef _ADP5589_H #define _ADP5589_H -#define ADP5589_ID 0x00 -#define ADP5589_INT_STATUS 0x01 -#define ADP5589_STATUS 0x02 -#define ADP5589_FIFO_1 0x03 -#define ADP5589_FIFO_2 0x04 -#define ADP5589_FIFO_3 0x05 -#define ADP5589_FIFO_4 0x06 -#define ADP5589_FIFO_5 0x07 -#define ADP5589_FIFO_6 0x08 -#define ADP5589_FIFO_7 0x09 -#define ADP5589_FIFO_8 0x0A -#define ADP5589_FIFO_9 0x0B -#define ADP5589_FIFO_10 0x0C -#define ADP5589_FIFO_11 0x0D -#define ADP5589_FIFO_12 0x0E -#define ADP5589_FIFO_13 0x0F -#define ADP5589_FIFO_14 0x10 -#define ADP5589_FIFO_15 0x11 -#define ADP5589_FIFO_16 0x12 -#define ADP5589_GPI_INT_STAT_A 0x13 -#define ADP5589_GPI_INT_STAT_B 0x14 -#define ADP5589_GPI_INT_STAT_C 0x15 -#define ADP5589_GPI_STATUS_A 0x16 -#define ADP5589_GPI_STATUS_B 0x17 -#define ADP5589_GPI_STATUS_C 0x18 -#define ADP5589_RPULL_CONFIG_A 0x19 -#define ADP5589_RPULL_CONFIG_B 0x1A -#define ADP5589_RPULL_CONFIG_C 0x1B -#define ADP5589_RPULL_CONFIG_D 0x1C -#define ADP5589_RPULL_CONFIG_E 0x1D -#define ADP5589_GPI_INT_LEVEL_A 0x1E -#define ADP5589_GPI_INT_LEVEL_B 0x1F -#define ADP5589_GPI_INT_LEVEL_C 0x20 -#define ADP5589_GPI_EVENT_EN_A 0x21 -#define ADP5589_GPI_EVENT_EN_B 0x22 -#define ADP5589_GPI_EVENT_EN_C 0x23 -#define ADP5589_GPI_INTERRUPT_EN_A 0x24 -#define ADP5589_GPI_INTERRUPT_EN_B 0x25 -#define ADP5589_GPI_INTERRUPT_EN_C 0x26 -#define ADP5589_DEBOUNCE_DIS_A 0x27 -#define ADP5589_DEBOUNCE_DIS_B 0x28 -#define ADP5589_DEBOUNCE_DIS_C 0x29 -#define ADP5589_GPO_DATA_OUT_A 0x2A -#define ADP5589_GPO_DATA_OUT_B 0x2B -#define ADP5589_GPO_DATA_OUT_C 0x2C -#define ADP5589_GPO_OUT_MODE_A 0x2D -#define ADP5589_GPO_OUT_MODE_B 0x2E -#define ADP5589_GPO_OUT_MODE_C 0x2F -#define ADP5589_GPIO_DIRECTION_A 0x30 -#define ADP5589_GPIO_DIRECTION_B 0x31 -#define ADP5589_GPIO_DIRECTION_C 0x32 -#define ADP5589_UNLOCK1 0x33 -#define ADP5589_UNLOCK2 0x34 -#define ADP5589_EXT_LOCK_EVENT 0x35 -#define ADP5589_UNLOCK_TIMERS 0x36 -#define ADP5589_LOCK_CFG 0x37 -#define ADP5589_RESET1_EVENT_A 0x38 -#define ADP5589_RESET1_EVENT_B 0x39 -#define ADP5589_RESET1_EVENT_C 0x3A -#define ADP5589_RESET2_EVENT_A 0x3B -#define ADP5589_RESET2_EVENT_B 0x3C -#define ADP5589_RESET_CFG 0x3D -#define ADP5589_PWM_OFFT_LOW 0x3E -#define ADP5589_PWM_OFFT_HIGH 0x3F -#define ADP5589_PWM_ONT_LOW 0x40 -#define ADP5589_PWM_ONT_HIGH 0x41 -#define ADP5589_PWM_CFG 0x42 -#define ADP5589_CLOCK_DIV_CFG 0x43 -#define ADP5589_LOGIC_1_CFG 0x44 -#define ADP5589_LOGIC_2_CFG 0x45 -#define ADP5589_LOGIC_FF_CFG 0x46 -#define ADP5589_LOGIC_INT_EVENT_EN 0x47 -#define ADP5589_POLL_PTIME_CFG 0x48 -#define ADP5589_PIN_CONFIG_A 0x49 -#define ADP5589_PIN_CONFIG_B 0x4A -#define ADP5589_PIN_CONFIG_C 0x4B -#define ADP5589_PIN_CONFIG_D 0x4C -#define ADP5589_GENERAL_CFG 0x4D -#define ADP5589_INT_EN 0x4E - -#define ADP5589_DEVICE_ID_MASK 0xF - -/* Put one of these structures in i2c_board_info platform_data */ +/* + * ADP5589 specific GPI and Keymap defines + */ #define ADP5589_KEYMAPSIZE 88 @@ -127,6 +47,35 @@ #define ADP5589_GPIMAPSIZE_MAX (ADP5589_GPI_PIN_END - ADP5589_GPI_PIN_BASE + 1) +/* + * ADP5585 specific GPI and Keymap defines + */ + +#define ADP5585_KEYMAPSIZE 30 + +#define ADP5585_GPI_PIN_ROW0 37 +#define ADP5585_GPI_PIN_ROW1 38 +#define ADP5585_GPI_PIN_ROW2 39 +#define ADP5585_GPI_PIN_ROW3 40 +#define ADP5585_GPI_PIN_ROW4 41 +#define ADP5585_GPI_PIN_ROW5 42 +#define ADP5585_GPI_PIN_COL0 43 +#define ADP5585_GPI_PIN_COL1 44 +#define ADP5585_GPI_PIN_COL2 45 +#define ADP5585_GPI_PIN_COL3 46 +#define ADP5585_GPI_PIN_COL4 47 +#define GPI_LOGIC 48 + +#define ADP5585_GPI_PIN_ROW_BASE ADP5585_GPI_PIN_ROW0 +#define ADP5585_GPI_PIN_ROW_END ADP5585_GPI_PIN_ROW5 +#define ADP5585_GPI_PIN_COL_BASE ADP5585_GPI_PIN_COL0 +#define ADP5585_GPI_PIN_COL_END ADP5585_GPI_PIN_COL4 + +#define ADP5585_GPI_PIN_BASE ADP5585_GPI_PIN_ROW_BASE +#define ADP5585_GPI_PIN_END ADP5585_GPI_PIN_COL_END + +#define ADP5585_GPIMAPSIZE_MAX (ADP5585_GPI_PIN_END - ADP5585_GPI_PIN_BASE + 1) + struct adp5589_gpi_map { unsigned short pin; unsigned short sw_evt; @@ -159,7 +108,7 @@ struct adp5589_gpi_map { #define RESET2_POL_HIGH (1 << 7) #define RESET2_POL_LOW (0 << 7) -/* Mask Bits: +/* ADP5589 Mask Bits: * C C C C C C C C C C C | R R R R R R R R * 1 9 8 7 6 5 4 3 2 1 0 | 7 6 5 4 3 2 1 0 * 0 @@ -168,18 +117,44 @@ struct adp5589_gpi_map { * 8 7 6 5 4 3 2 1 0 9 8 | 7 6 5 4 3 2 1 0 */ -#define ADP_ROW(x) (1 << (x)) -#define ADP_COL(x) (1 << (x + 8)) +#define ADP_ROW(x) (1 << (x)) +#define ADP_COL(x) (1 << (x + 8)) +#define ADP5589_ROW_MASK 0xFF +#define ADP5589_COL_MASK 0xFF +#define ADP5589_COL_SHIFT 8 +#define ADP5589_MAX_ROW_NUM 7 +#define ADP5589_MAX_COL_NUM 10 + +/* ADP5585 Mask Bits: + * C C C C C | R R R R R R + * 4 3 2 1 0 | 5 4 3 2 1 0 + * + * ---- BIT -- ----------- + * 1 0 0 0 0 | 0 0 0 0 0 0 + * 0 9 8 7 6 | 5 4 3 2 1 0 + */ + +#define ADP5585_ROW_MASK 0x3F +#define ADP5585_COL_MASK 0x1F +#define ADP5585_ROW_SHIFT 0 +#define ADP5585_COL_SHIFT 6 +#define ADP5585_MAX_ROW_NUM 5 +#define ADP5585_MAX_COL_NUM 4 + +#define ADP5585_ROW(x) (1 << ((x) & ADP5585_ROW_MASK)) +#define ADP5585_COL(x) (1 << (((x) & ADP5585_COL_MASK) + ADP5585_COL_SHIFT)) + +/* Put one of these structures in i2c_board_info platform_data */ struct adp5589_kpad_platform_data { unsigned keypad_en_mask; /* Keypad (Rows/Columns) enable mask */ const unsigned short *keymap; /* Pointer to keymap */ unsigned short keymapsize; /* Keymap size */ bool repeat; /* Enable key repeat */ - bool en_keylock; /* Enable key lock feature */ - unsigned char unlock_key1; /* Unlock Key 1 */ - unsigned char unlock_key2; /* Unlock Key 2 */ - unsigned char unlock_timer; /* Time in seconds [0..7] between the two unlock keys 0=disable */ + bool en_keylock; /* Enable key lock feature (ADP5589 only)*/ + unsigned char unlock_key1; /* Unlock Key 1 (ADP5589 only) */ + unsigned char unlock_key2; /* Unlock Key 2 (ADP5589 only) */ + unsigned char unlock_timer; /* Time in seconds [0..7] between the two unlock keys 0=disable (ADP5589 only) */ unsigned char scan_cycle_time; /* Time between consecutive scan cycles */ unsigned char reset_cfg; /* Reset config */ unsigned short reset1_key_1; /* Reset Key 1 */ -- cgit v1.2.3