From 4d1a3a0dc551cfa7304ca46e014231500f3b81a6 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Tue, 13 Dec 2011 16:57:07 +0100 Subject: ARM: 7218/1: mmc: mmci: Provide option to configure bus signal direction The ST Micro variant supports bus signal direction indication. A new member in the variant struct is added for this. Moreover the actual signal direction configuration is board specific, thus the amba mmci platform data is extended with a new member to be able provide mmci with these specific board configurations. This patch is based upon a patch from Sebastian Rasmussen. Tested-by: Linus Walleij Signed-off-by: Sebastian Rasmussen Signed-off-by: Ulf Hansson Signed-off-by: Russell King --- include/linux/amba/mmci.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'include/linux/amba') diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h index 0101e9c17fa1..b51bf5fa85f8 100644 --- a/include/linux/amba/mmci.h +++ b/include/linux/amba/mmci.h @@ -6,6 +6,19 @@ #include + +/* + * These defines is places here due to access is needed from machine + * configuration files. The ST Micro version does not have ROD and + * reuse the voltage registers for direction settings. + */ +#define MCI_ST_DATA2DIREN (1 << 2) +#define MCI_ST_CMDDIREN (1 << 3) +#define MCI_ST_DATA0DIREN (1 << 4) +#define MCI_ST_DATA31DIREN (1 << 5) +#define MCI_ST_FBCLKEN (1 << 7) +#define MCI_ST_DATA74DIREN (1 << 8) + /* Just some dummy forwarding */ struct dma_chan; @@ -31,6 +44,8 @@ struct dma_chan; * @capabilities: the capabilities of the block as implemented in * this platform, signify anything MMC_CAP_* from mmc/host.h * @capabilities2: more capabilities, MMC_CAP2_* from mmc/host.h + * @sigdir: a bit field indicating for what bits in the MMC bus the host + * should enable signal direction indication. * @dma_filter: function used to select an appropriate RX and TX * DMA channel to be used for DMA, if and only if you're deploying the * generic DMA engine @@ -54,6 +69,7 @@ struct mmci_platform_data { bool cd_invert; unsigned long capabilities; unsigned long capabilities2; + u32 sigdir; bool (*dma_filter)(struct dma_chan *chan, void *filter_param); void *dma_rx_param; void *dma_tx_param; -- cgit v1.2.3 From bc521818e28042bb6018d91c353d24fb01ccb162 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Tue, 13 Dec 2011 16:57:55 +0100 Subject: ARM: 7219/1: mmc: mmci: Change vdd_handler to a generic ios_handler The purpose of the vdd_handler does not make sense. We remove it and use a generic approach instead. A new ios_handler is added, the purpose of which e.g. can be to control GPIO pins to a levelshifter. Previously the vdd_handler was also used for making additional changes to the power register bits. This option is superfluous and is therefore removed. Adaptaptions from the old vdd_handler to the new ios_handler is done for mach-ux500 board, which was the only one using the vdd_handler. This patch is based upon a patch from Sebastian Rasmussen. Tested-by: Linus Walleij Signed-off-by: Sebastian Rasmussen Signed-off-by: Ulf Hansson Signed-off-by: Russell King --- include/linux/amba/mmci.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux/amba') diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h index b51bf5fa85f8..32a89cf5ec45 100644 --- a/include/linux/amba/mmci.h +++ b/include/linux/amba/mmci.h @@ -31,7 +31,8 @@ struct dma_chan; * @ocr_mask: available voltages on the 4 pins from the block, this * is ignored if a regulator is used, see the MMC_VDD_* masks in * mmc/host.h - * @vdd_handler: a callback function to translate a MMC_VDD_* + * @ios_handler: a callback function to act on specfic ios changes, + * used for example to control a levelshifter * mask into a value to be binary (or set some other custom bits * in MMCIPWR) or:ed and written into the MMCIPWR register of the * block. May also control external power based on the power_mode. @@ -61,8 +62,7 @@ struct dma_chan; struct mmci_platform_data { unsigned int f_max; unsigned int ocr_mask; - u32 (*vdd_handler)(struct device *, unsigned int vdd, - unsigned char power_mode); + int (*ios_handler)(struct device *, struct mmc_ios *); unsigned int (*status)(struct device *); int gpio_wp; int gpio_cd; -- cgit v1.2.3 From d5dc9271b25822f36d299f8cab985379743424b9 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 18 Dec 2011 11:07:47 +0000 Subject: ARM: amba: add amba_device allocation/add/put functions Add functions to allocate and initialize AMBA device structures, and add them to the Linux device manager. This allows us to kill this type of operation from individual platforms, moving it to core code. Signed-off-by: Russell King --- include/linux/amba/bus.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/amba') diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index 724c69c40bb8..e1929620e5a8 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -60,6 +60,9 @@ extern struct bus_type amba_bustype; int amba_driver_register(struct amba_driver *); void amba_driver_unregister(struct amba_driver *); +struct amba_device *amba_device_alloc(const char *, resource_size_t, size_t); +void amba_device_put(struct amba_device *); +int amba_device_add(struct amba_device *, struct resource *); int amba_device_register(struct amba_device *, struct resource *); void amba_device_unregister(struct amba_device *); struct amba_device *amba_find_device(const char *, struct device *, unsigned int, unsigned int); -- cgit v1.2.3 From cc6e75af8df7aa40019ff58357170c8dd960281f Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 18 Dec 2011 12:06:25 +0000 Subject: ARM: amba: provide common initializers for static amba devices Acked-by: H Hartley Sweeten Signed-off-by: Russell King --- include/linux/amba/bus.h | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) (limited to 'include/linux/amba') diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index e1929620e5a8..a9fab831caf8 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -92,4 +92,37 @@ void amba_release_regions(struct amba_device *); #define amba_manf(d) AMBA_MANF_BITS((d)->periphid) #define amba_part(d) AMBA_PART_BITS((d)->periphid) +#define __AMBA_DEV(busid, data, mask) \ + { \ + .coherent_dma_mask = mask, \ + .init_name = busid, \ + .platform_data = data, \ + } + +/* + * APB devices do not themselves have the ability to address memory, + * so DMA masks should be zero (much like USB peripheral devices.) + * The DMA controller DMA masks should be used instead (much like + * USB host controllers in conventional PCs.) + */ +#define AMBA_APB_DEVICE(name, busid, id, base, irqs, data) \ +struct amba_device name##_device = { \ + .dev = __AMBA_DEV(busid, data, 0), \ + .res = DEFINE_RES_MEM(base, SZ_4K), \ + .irq = irqs, \ + .periphid = id, \ +} + +/* + * AHB devices are DMA capable, so set their DMA masks + */ +#define AMBA_AHB_DEVICE(name, busid, id, base, irqs, data) \ +struct amba_device name##_device = { \ + .dev = __AMBA_DEV(busid, data, ~0ULL), \ + .res = DEFINE_RES_MEM(base, SZ_4K), \ + .dma_mask = ~0ULL, \ + .irq = irqs, \ + .periphid = id, \ +} + #endif -- cgit v1.2.3 From 14af60b6fb3b76634278364b697dae2f9f360abf Mon Sep 17 00:00:00 2001 From: Chris Blair Date: Thu, 2 Feb 2012 13:59:34 +0100 Subject: spi/pl022: Add high priority message pump support This switches the PL022 worker to a kthread in order to get hold of a mechanism to control the message pump priority. On low-latency systems elevating the message kthread to realtime priority give a real sleek response curve. This has been confirmed by measurements. Realtime priority elevation for a certain PL022 port can be requested from platform data. Cc: Mark Brown Acked-by: Viresh Kumar Signed-off-by: Chris Blair Signed-off-by: Linus Walleij Signed-off-by: Grant Likely --- include/linux/amba/pl022.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/amba') diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h index 572f637299c9..3672f40f3455 100644 --- a/include/linux/amba/pl022.h +++ b/include/linux/amba/pl022.h @@ -241,6 +241,8 @@ struct dma_chan; * @autosuspend_delay: delay in ms following transfer completion before the * runtime power management system suspends the device. A setting of 0 * indicates no delay and the device will be suspended immediately. + * @rt: indicates the controller should run the message pump with realtime + * priority to minimise the transfer latency on the bus. */ struct pl022_ssp_controller { u16 bus_id; @@ -250,6 +252,7 @@ struct pl022_ssp_controller { void *dma_rx_param; void *dma_tx_param; int autosuspend_delay; + bool rt; }; /** -- cgit v1.2.3 From 8c9f7aa316f547f70d270a08d1212f958721c071 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 1 Feb 2012 16:12:20 +0530 Subject: dmaengine/amba-pl08x: Take flow controller info from DMA_SLAVE_CONFIG Flow controller information is passed now from DMA_SLAVE_CONFIG option. This patch makes changes in pl08x driver to use device_fc from it instead of platform data. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Vinod Koul --- include/linux/amba/pl08x.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'include/linux/amba') diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 033f6aa670de..2c58853ca423 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -47,9 +47,6 @@ enum { * @muxval: a number usually used to poke into some mux regiser to * mux in the signal to this channel * @cctl_opt: default options for the channel control register - * @device_fc: Flow Controller Settings for ccfg register. Only valid for slave - * channels. Fill with 'true' if peripheral should be flow controller. Direction - * will be selected at Runtime. * @addr: source/target address in physical memory for this DMA channel, * can be the address of a FIFO register for burst requests for example. * This can be left undefined if the PrimeCell API is used for configuring @@ -68,7 +65,6 @@ struct pl08x_channel_data { int max_signal; u32 muxval; u32 cctl; - bool device_fc; dma_addr_t addr; bool circular_buffer; bool single; @@ -183,6 +179,9 @@ enum pl08x_dma_chan_state { * @host: a pointer to the host (internal use) * @state: whether the channel is idle, paused, running etc * @slave: whether this channel is a device (slave) or for memcpy + * @device_fc: Flow Controller Settings for ccfg register. Only valid for slave + * channels. Fill with 'true' if peripheral should be flow controller. Direction + * will be selected at Runtime. * @waiting: a TX descriptor on this channel which is waiting for a physical * channel to become available */ @@ -205,6 +204,7 @@ struct pl08x_dma_chan { struct pl08x_driver_data *host; enum pl08x_dma_chan_state state; bool slave; + bool device_fc; struct pl08x_txd *waiting; }; -- cgit v1.2.3 From b7d861d9394534db94f0fb8f4b9d984f996d0528 Mon Sep 17 00:00:00 2001 From: Boojin Kim Date: Mon, 26 Dec 2011 18:49:52 +0900 Subject: DMA: PL330: Merge PL330 driver into drivers/dma/ Currently there were two part of DMAC PL330 driver for support old styled s3c-pl330 which has been merged into drivers/dma/pl330.c driver. Actually, there is no reason to separate them now. Basically this patch merges arch/arm/common/pl330.c into drivers/dma/pl330.c driver and removes useless exported symbol, externed function and so on. The newer pl330 driver tested on SMDKV310 and SMDK4212 boards Cc: Jassi Brar Cc: Russell King Acked-by: Linus Walleij Acked-by: Vinod Koul Signed-off-by: Boojin Kim Signed-off-by: Kukjin Kim Acked-by: Jassi Brar Signed-off-by: Vinod Koul --- include/linux/amba/pl330.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux/amba') diff --git a/include/linux/amba/pl330.h b/include/linux/amba/pl330.h index 12e023c19ac1..fe93758e8403 100644 --- a/include/linux/amba/pl330.h +++ b/include/linux/amba/pl330.h @@ -13,7 +13,6 @@ #define __AMBA_PL330_H_ #include -#include struct dma_pl330_platdata { /* -- cgit v1.2.3 From 4d4e58de32a192fea65ab84509d17d199bd291c8 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Tue, 6 Mar 2012 22:34:06 +0000 Subject: dmaengine: move last completed cookie into generic dma_chan structure Every DMA engine implementation declares a last completed dma cookie in their private dma channel structures. This is pointless, and forces driver specific code. Move this out into the common dma_chan structure. Signed-off-by: Russell King Tested-by: Linus Walleij Reviewed-by: Linus Walleij Acked-by: Jassi Brar [imx-sdma.c & mxs-dma.c] Tested-by: Shawn Guo Signed-off-by: Vinod Koul --- include/linux/amba/pl08x.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux/amba') diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 2c58853ca423..e64ce2cfee99 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -172,7 +172,6 @@ enum pl08x_dma_chan_state { * @runtime_addr: address for RX/TX according to the runtime config * @runtime_direction: current direction of this channel according to * runtime config - * @lc: last completed transaction on this channel * @pend_list: queued transactions pending on this channel * @at: active transaction on this channel * @lock: a lock for this channel data @@ -197,7 +196,6 @@ struct pl08x_dma_chan { u32 src_cctl; u32 dst_cctl; enum dma_transfer_direction runtime_direction; - dma_cookie_t lc; struct list_head pend_list; struct pl08x_txd *at; spinlock_t lock; -- cgit v1.2.3 From 313162d0b83836e2f57e51b9b8650fb4b9c396ea Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Mon, 30 Jan 2012 11:46:54 -0500 Subject: device.h: audit and cleanup users in main include dir The header includes a lot of stuff, and it in turn gets a lot of use just for the basic "struct device" which appears so often. Clean up the users as follows: 1) For those headers only needing "struct device" as a pointer in fcn args, replace the include with exactly that. 2) For headers not really using anything from device.h, simply delete the include altogether. 3) For headers relying on getting device.h implicitly before being included themselves, now explicitly include device.h 4) For files in which doing #1 or #2 uncovers an implicit dependency on some other header, fix by explicitly adding the required header(s). Any C files that were implicitly relying on device.h to be present have already been dealt with in advance. Total removals from #1 and #2: 51. Total additions coming from #3: 9. Total other implicit dependencies from #4: 7. As of 3.3-rc1, there were 110, so a net removal of 42 gives about a 38% reduction in device.h presence in include/* Signed-off-by: Paul Gortmaker --- include/linux/amba/pl022.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux/amba') diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h index 572f637299c9..9da37a45faf5 100644 --- a/include/linux/amba/pl022.h +++ b/include/linux/amba/pl022.h @@ -25,8 +25,6 @@ #ifndef _SSP_PL022_H #define _SSP_PL022_H -#include - /** * whether SSP is in loopback mode or not */ -- cgit v1.2.3 From 9e5ed094c89e55fbf11d2e81d60be98eb12346c0 Mon Sep 17 00:00:00 2001 From: viresh kumar Date: Thu, 15 Mar 2012 10:40:38 +0100 Subject: ARM: 7362/1: AMBA: Add module_amba_driver() helper macro for amba_driver For simple modules that contain a single amba_driver without any additional setup code then ends up being a block of duplicated boilerplate. This patch adds a new macro, module_amba_driver(), which replaces the module_init()/module_exit() registrations with template functions. Signed-off-by: Viresh Kumar Signed-off-by: Russell King --- include/linux/amba/bus.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux/amba') diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index a9fab831caf8..7847e197730a 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -125,4 +125,13 @@ struct amba_device name##_device = { \ .periphid = id, \ } +/* + * module_amba_driver() - Helper macro for drivers that don't do anything + * special in module init/exit. This eliminates a lot of boilerplate. Each + * module may only use this macro once, and calling it replaces module_init() + * and module_exit() + */ +#define module_amba_driver(__amba_drv) \ + module_driver(__amba_drv, amba_driver_register, amba_driver_unregister) + #endif -- cgit v1.2.3