From 9bbb8168ed3d8b946f9c1901a63a675012de88f2 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 15 Feb 2012 19:31:20 +0100 Subject: ath9k_hw: prevent writes to const data on AR9160 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Duplicate the data for iniAddac early on, to avoid having to do redundant memcpy calls later. While we're at it, make AR5416 < v2.2 use the same codepath. Fixes a reported crash on x86. Signed-off-by: Felix Fietkau Reported-by: Magnus Määttä Cc: stable@vger.kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar5008_phy.c | 25 +------------------------ drivers/net/wireless/ath/ath9k/ar9002_hw.c | 19 +++++++++++++++++++ drivers/net/wireless/ath/ath9k/hw.h | 1 - 3 files changed, 20 insertions(+), 25 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c index f901a17f76ba..86a891f93fc9 100644 --- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c @@ -489,8 +489,6 @@ static int ar5008_hw_rf_alloc_ext_banks(struct ath_hw *ah) ATH_ALLOC_BANK(ah->analogBank6Data, ah->iniBank6.ia_rows); ATH_ALLOC_BANK(ah->analogBank6TPCData, ah->iniBank6TPC.ia_rows); ATH_ALLOC_BANK(ah->analogBank7Data, ah->iniBank7.ia_rows); - ATH_ALLOC_BANK(ah->addac5416_21, - ah->iniAddac.ia_rows * ah->iniAddac.ia_columns); ATH_ALLOC_BANK(ah->bank6Temp, ah->iniBank6.ia_rows); return 0; @@ -519,7 +517,6 @@ static void ar5008_hw_rf_free_ext_banks(struct ath_hw *ah) ATH_FREE_BANK(ah->analogBank6Data); ATH_FREE_BANK(ah->analogBank6TPCData); ATH_FREE_BANK(ah->analogBank7Data); - ATH_FREE_BANK(ah->addac5416_21); ATH_FREE_BANK(ah->bank6Temp); #undef ATH_FREE_BANK @@ -805,27 +802,7 @@ static int ar5008_hw_process_ini(struct ath_hw *ah, if (ah->eep_ops->set_addac) ah->eep_ops->set_addac(ah, chan); - if (AR_SREV_5416_22_OR_LATER(ah)) { - REG_WRITE_ARRAY(&ah->iniAddac, 1, regWrites); - } else { - struct ar5416IniArray temp; - u32 addacSize = - sizeof(u32) * ah->iniAddac.ia_rows * - ah->iniAddac.ia_columns; - - /* For AR5416 2.0/2.1 */ - memcpy(ah->addac5416_21, - ah->iniAddac.ia_array, addacSize); - - /* override CLKDRV value at [row, column] = [31, 1] */ - (ah->addac5416_21)[31 * ah->iniAddac.ia_columns + 1] = 0; - - temp.ia_array = ah->addac5416_21; - temp.ia_columns = ah->iniAddac.ia_columns; - temp.ia_rows = ah->iniAddac.ia_rows; - REG_WRITE_ARRAY(&temp, 1, regWrites); - } - + REG_WRITE_ARRAY(&ah->iniAddac, 1, regWrites); REG_WRITE(ah, AR_PHY_ADC_SERIAL_CTL, AR_PHY_SEL_INTERNAL_ADDAC); ENABLE_REGWRITE_BUFFER(ah); diff --git a/drivers/net/wireless/ath/ath9k/ar9002_hw.c b/drivers/net/wireless/ath/ath9k/ar9002_hw.c index 11f192a1ceb7..d190411ac8f5 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_hw.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c @@ -180,6 +180,25 @@ static void ar9002_hw_init_mode_regs(struct ath_hw *ah) INIT_INI_ARRAY(&ah->iniAddac, ar5416Addac, ARRAY_SIZE(ar5416Addac), 2); } + + /* iniAddac needs to be modified for these chips */ + if (AR_SREV_9160(ah) || !AR_SREV_5416_22_OR_LATER(ah)) { + struct ar5416IniArray *addac = &ah->iniAddac; + u32 size = sizeof(u32) * addac->ia_rows * addac->ia_columns; + u32 *data; + + data = kmalloc(size, GFP_KERNEL); + if (!data) + return; + + memcpy(data, addac->ia_array, size); + addac->ia_array = data; + + if (!AR_SREV_5416_22_OR_LATER(ah)) { + /* override CLKDRV value */ + INI_RA(addac, 31,1) = 0; + } + } } /* Support for Japan ch.14 (2484) spread */ diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 6a29004a71b0..c8261d4fc780 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -940,7 +940,6 @@ struct ath_hw { u32 *analogBank6Data; u32 *analogBank6TPCData; u32 *analogBank7Data; - u32 *addac5416_21; u32 *bank6Temp; u8 txpower_limit; -- cgit v1.2.3 From 7be081539e540517d5e1fcbf96b8080074afbf08 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Thu, 16 Feb 2012 20:44:59 +0100 Subject: rt2x00: fix a possible NULL pointer dereference The 'rt2x00lib_probe_dev' function tries to allocate the workqueue. If the allocation fails, 'rt2x00_lib_remove_dev' is called on the error path. Because 'rt2x00dev->workqueue' is NULL in this case, the 'destroy_workqueue' call will cause a NULL pointer dereference. Signed-off-by: Gabor Juhos Acked-by: Gertjan van Wingerde Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00dev.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index c3e1aa7c1a80..d2a1ea98d0f2 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -1220,7 +1220,8 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev) cancel_work_sync(&rt2x00dev->rxdone_work); cancel_work_sync(&rt2x00dev->txdone_work); } - destroy_workqueue(rt2x00dev->workqueue); + if (rt2x00dev->workqueue) + destroy_workqueue(rt2x00dev->workqueue); /* * Free the tx status fifo. -- cgit v1.2.3 From 5dcbf480473f6c3f06ad2426b7517038a2a18911 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 17 Feb 2012 09:47:14 -0800 Subject: iwlwifi: fix key removal When trying to remove a key, we always send key flags just setting the key type, not including the multicast flag and the key ID. As a result, whenever any key was removed, the unicast key 0 would be removed, causing a complete connection loss after the second rekey (the first doesn't cause a key removal). Fix the key removal code to include the key ID and multicast flag, thus removing the correct key. Cc: stable@vger.kernel.org Reported-by: Alexander Schnaidt Tested-by: Alexander Schnaidt Signed-off-by: Johannes Berg Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn-sta.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-sta.c b/drivers/net/wireless/iwlwifi/iwl-agn-sta.c index 7353826095f1..e483cfa8d14e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-sta.c @@ -1187,6 +1187,7 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv, unsigned long flags; struct iwl_addsta_cmd sta_cmd; u8 sta_id = iwlagn_key_sta_id(priv, ctx->vif, sta); + __le16 key_flags; /* if station isn't there, neither is the key */ if (sta_id == IWL_INVALID_STATION) @@ -1212,7 +1213,14 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv, IWL_ERR(priv, "offset %d not used in uCode key table.\n", keyconf->hw_key_idx); - sta_cmd.key.key_flags = STA_KEY_FLG_NO_ENC | STA_KEY_FLG_INVALID; + key_flags = cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); + key_flags |= STA_KEY_FLG_MAP_KEY_MSK | STA_KEY_FLG_NO_ENC | + STA_KEY_FLG_INVALID; + + if (!(keyconf->flags & IEEE80211_KEY_FLAG_PAIRWISE)) + key_flags |= STA_KEY_MULTICAST_MSK; + + sta_cmd.key.key_flags = key_flags; sta_cmd.key.key_offset = WEP_INVALID_OFFSET; sta_cmd.sta.modify_mask = STA_MODIFY_KEY_MASK; sta_cmd.mode = STA_CONTROL_MODIFY_MSK; -- cgit v1.2.3 From 85091fc0a75653e239dc8379658515e577544927 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Thu, 23 Feb 2012 18:38:22 +0100 Subject: brcm80211: smac: fix endless retry of A-MPDU transmissions The A-MPDU code checked against a retry limit, but it was using the wrong variable to do so. This patch fixes this to assure proper retry mechanism. This problem had a side-effect causing the mac80211 flush callback to remain waiting forever as well. That side effect has been fixed by commit by Stanislaw Gruszka: commit f96b08a7e6f69c0f0a576554df3df5b1b519c479 Date: Tue Jan 17 12:38:50 2012 +0100 brcmsmac: fix tx queue flush infinite loop Reference: https://bugzilla.kernel.org/show_bug.cgi?id=42576 Cc: Stanislaw Gruszka Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Alwin Beukers Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmsmac/ampdu.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c b/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c index 90911eec0cf5..92652264f205 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c @@ -1051,17 +1051,13 @@ brcms_c_ampdu_dotxstatus_complete(struct ampdu_info *ampdu, struct scb *scb, } /* either retransmit or send bar if ack not recd */ if (!ack_recd) { - struct ieee80211_tx_rate *txrate = - tx_info->status.rates; - if (retry && (txrate[0].count < (int)retry_limit)) { + if (retry && (ini->txretry[index] < (int)retry_limit)) { ini->txretry[index]++; ini->tx_in_transit--; /* * Use high prededence for retransmit to * give some punch */ - /* brcms_c_txq_enq(wlc, scb, p, - * BRCMS_PRIO_TO_PREC(tid)); */ brcms_c_txq_enq(wlc, scb, p, BRCMS_PRIO_TO_HI_PREC(tid)); } else { -- cgit v1.2.3 From 2b0a53d51b5f263bb581bbdb40ebb9f7e09609b1 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Thu, 23 Feb 2012 18:38:23 +0100 Subject: brcm80211: smac: only print block-ack timeout message at trace level In regular use block-ack timeouts can happen so it does not make sense to fill the log with these messages. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Alwin Beukers Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmsmac/ampdu.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c b/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c index 92652264f205..30b58870b1b6 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c @@ -1070,9 +1070,9 @@ brcms_c_ampdu_dotxstatus_complete(struct ampdu_info *ampdu, struct scb *scb, IEEE80211_TX_STAT_AMPDU_NO_BACK; skb_pull(p, D11_PHY_HDR_LEN); skb_pull(p, D11_TXH_LEN); - wiphy_err(wiphy, "%s: BA Timeout, seq %d, in_" - "transit %d\n", "AMPDU status", seq, - ini->tx_in_transit); + BCMMSG(wiphy, + "BA Timeout, seq %d, in_transit %d\n", + seq, ini->tx_in_transit); ieee80211_tx_status_irqsafe(wlc->pub->ieee_hw, p); } -- cgit v1.2.3 From 992d52529d7840236d3059b51c15d5eb9e81a869 Mon Sep 17 00:00:00 2001 From: Nicolas Cavallari Date: Thu, 23 Feb 2012 16:53:34 +0100 Subject: carl9170: Fix memory accounting when sta is in power-save mode. On Access Point mode, when transmitting a packet, if the destination station is in powersave mode, we abort transmitting the packet to the device queue, but we do not reclaim the allocated memory. Given enough packets, we can go in a state where there is no packet on the device queue, but we think the device has no memory left, so no packet gets transmitted, connections breaks and the AP stops working. This undo the allocation done in the TX path when the station is in power-save mode. Signed-off-by: Nicolas Cavallari Acked-by: Christian Lamparter Cc: stable Signed-off-by: John W. Linville --- drivers/net/wireless/ath/carl9170/tx.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/carl9170/tx.c b/drivers/net/wireless/ath/carl9170/tx.c index d19a9ee9d057..22a793121bd3 100644 --- a/drivers/net/wireless/ath/carl9170/tx.c +++ b/drivers/net/wireless/ath/carl9170/tx.c @@ -1251,6 +1251,7 @@ static bool carl9170_tx_ps_drop(struct ar9170 *ar, struct sk_buff *skb) atomic_dec(&ar->tx_ampdu_upload); tx_info->flags |= IEEE80211_TX_STAT_TX_FILTERED; + carl9170_release_dev_space(ar, skb); carl9170_tx_status(ar, skb, false); return true; } -- cgit v1.2.3 From 9926a67557532acb6cddb1c1add02952175b5c72 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sat, 25 Feb 2012 21:36:36 +0100 Subject: carl9170: fix frame delivery if sta is in powersave mode Nicolas Cavallari discovered that carl9170 has some serious problems delivering data to sleeping stations. It turns out that the driver was not honoring two important flags (IEEE80211_TX_CTL_POLL_RESPONSE and IEEE80211_TX_CTL_CLEAR_PS_FILT) which are set on frames that should be sent although the receiving station is still in powersave mode. Cc: stable Reported-by: Nicolas Cavallari Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ath/carl9170/tx.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/carl9170/tx.c b/drivers/net/wireless/ath/carl9170/tx.c index 22a793121bd3..bbc813dee983 100644 --- a/drivers/net/wireless/ath/carl9170/tx.c +++ b/drivers/net/wireless/ath/carl9170/tx.c @@ -1234,6 +1234,7 @@ static bool carl9170_tx_ps_drop(struct ar9170 *ar, struct sk_buff *skb) { struct ieee80211_sta *sta; struct carl9170_sta_info *sta_info; + struct ieee80211_tx_info *tx_info; rcu_read_lock(); sta = __carl9170_get_tx_sta(ar, skb); @@ -1241,12 +1242,13 @@ static bool carl9170_tx_ps_drop(struct ar9170 *ar, struct sk_buff *skb) goto out_rcu; sta_info = (void *) sta->drv_priv; - if (unlikely(sta_info->sleeping)) { - struct ieee80211_tx_info *tx_info; + tx_info = IEEE80211_SKB_CB(skb); + if (unlikely(sta_info->sleeping) && + !(tx_info->flags & (IEEE80211_TX_CTL_POLL_RESPONSE | + IEEE80211_TX_CTL_CLEAR_PS_FILT))) { rcu_read_unlock(); - tx_info = IEEE80211_SKB_CB(skb); if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) atomic_dec(&ar->tx_ampdu_upload); -- cgit v1.2.3 From 00f157b49780e194c38dafdf9df8e10b8a6a9626 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Fri, 24 Feb 2012 21:35:35 -0800 Subject: mwifiex: reset encryption mode flag before association Recent commit "mwifiex: clear previous security setting during association" fixes association failure problems observed in some corner cases by clearing previous security setting before each association. We should reset encryption mode flag as well. This patch takes care of it. Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/cfg80211.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index 5b2972b43b0e..2210a0f9af2d 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -846,6 +846,7 @@ mwifiex_cfg80211_assoc(struct mwifiex_private *priv, size_t ssid_len, u8 *ssid, priv->sec_info.wpa_enabled = false; priv->sec_info.wpa2_enabled = false; priv->wep_key_curr_index = 0; + priv->sec_info.encryption_mode = 0; ret = mwifiex_set_encode(priv, NULL, 0, 0, 1); if (mode == NL80211_IFTYPE_ADHOC) { -- cgit v1.2.3 From 65ec698d1368fc64d0b93fb703783d25ec550577 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Tue, 28 Feb 2012 23:33:37 +0000 Subject: tg3: Fix tg3_get_stats64 for 5700 / 5701 devs tg3_get_stats64() takes tp->lock when dealing with non-serdes bcm5700 and bcm5701 devices. However, functions that call tg3_halt() have already acquired tp->lock. When tg3_get_stats64() is called in tg3_halt(), deadlock will occur. This patch fixes the problem by separating the stat gathering code into a new tg3_get_nstats() function. tg3_get_stats64() is recoded to call this function and take tp->lock. The code that takes tp->lock in tg3_calc_crc_errors() has been removed. Function signatures have been cleaned up too. Signed-off-by: Matt Carlson Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 45 +++++++++++++++++++------------------ 1 file changed, 23 insertions(+), 22 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index a1f2e0fed78b..423d0235a878 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -7886,10 +7886,8 @@ static int tg3_chip_reset(struct tg3 *tp) return 0; } -static struct rtnl_link_stats64 *tg3_get_stats64(struct net_device *, - struct rtnl_link_stats64 *); -static struct tg3_ethtool_stats *tg3_get_estats(struct tg3 *, - struct tg3_ethtool_stats *); +static void tg3_get_nstats(struct tg3 *, struct rtnl_link_stats64 *); +static void tg3_get_estats(struct tg3 *, struct tg3_ethtool_stats *); /* tp->lock is held. */ static int tg3_halt(struct tg3 *tp, int kind, int silent) @@ -7910,7 +7908,7 @@ static int tg3_halt(struct tg3 *tp, int kind, int silent) if (tp->hw_stats) { /* Save the stats across chip resets... */ - tg3_get_stats64(tp->dev, &tp->net_stats_prev), + tg3_get_nstats(tp, &tp->net_stats_prev), tg3_get_estats(tp, &tp->estats_prev); /* And make sure the next sample is new data */ @@ -9847,7 +9845,7 @@ static inline u64 get_stat64(tg3_stat64_t *val) return ((u64)val->high << 32) | ((u64)val->low); } -static u64 calc_crc_errors(struct tg3 *tp) +static u64 tg3_calc_crc_errors(struct tg3 *tp) { struct tg3_hw_stats *hw_stats = tp->hw_stats; @@ -9856,14 +9854,12 @@ static u64 calc_crc_errors(struct tg3 *tp) GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)) { u32 val; - spin_lock_bh(&tp->lock); if (!tg3_readphy(tp, MII_TG3_TEST1, &val)) { tg3_writephy(tp, MII_TG3_TEST1, val | MII_TG3_TEST1_CRC_EN); tg3_readphy(tp, MII_TG3_RXR_COUNTERS, &val); } else val = 0; - spin_unlock_bh(&tp->lock); tp->phy_crc_errors += val; @@ -9877,14 +9873,13 @@ static u64 calc_crc_errors(struct tg3 *tp) estats->member = old_estats->member + \ get_stat64(&hw_stats->member) -static struct tg3_ethtool_stats *tg3_get_estats(struct tg3 *tp, - struct tg3_ethtool_stats *estats) +static void tg3_get_estats(struct tg3 *tp, struct tg3_ethtool_stats *estats) { struct tg3_ethtool_stats *old_estats = &tp->estats_prev; struct tg3_hw_stats *hw_stats = tp->hw_stats; if (!hw_stats) - return old_estats; + return; ESTAT_ADD(rx_octets); ESTAT_ADD(rx_fragments); @@ -9963,20 +9958,13 @@ static struct tg3_ethtool_stats *tg3_get_estats(struct tg3 *tp, ESTAT_ADD(nic_tx_threshold_hit); ESTAT_ADD(mbuf_lwm_thresh_hit); - - return estats; } -static struct rtnl_link_stats64 *tg3_get_stats64(struct net_device *dev, - struct rtnl_link_stats64 *stats) +static void tg3_get_nstats(struct tg3 *tp, struct rtnl_link_stats64 *stats) { - struct tg3 *tp = netdev_priv(dev); struct rtnl_link_stats64 *old_stats = &tp->net_stats_prev; struct tg3_hw_stats *hw_stats = tp->hw_stats; - if (!hw_stats) - return old_stats; - stats->rx_packets = old_stats->rx_packets + get_stat64(&hw_stats->rx_ucast_packets) + get_stat64(&hw_stats->rx_mcast_packets) + @@ -10019,15 +10007,13 @@ static struct rtnl_link_stats64 *tg3_get_stats64(struct net_device *dev, get_stat64(&hw_stats->tx_carrier_sense_errors); stats->rx_crc_errors = old_stats->rx_crc_errors + - calc_crc_errors(tp); + tg3_calc_crc_errors(tp); stats->rx_missed_errors = old_stats->rx_missed_errors + get_stat64(&hw_stats->rx_discards); stats->rx_dropped = tp->rx_dropped; stats->tx_dropped = tp->tx_dropped; - - return stats; } static inline u32 calc_crc(unsigned char *buf, int len) @@ -15409,6 +15395,21 @@ static void __devinit tg3_init_coal(struct tg3 *tp) } } +static struct rtnl_link_stats64 *tg3_get_stats64(struct net_device *dev, + struct rtnl_link_stats64 *stats) +{ + struct tg3 *tp = netdev_priv(dev); + + if (!tp->hw_stats) + return &tp->net_stats_prev; + + spin_lock_bh(&tp->lock); + tg3_get_nstats(tp, stats); + spin_unlock_bh(&tp->lock); + + return stats; +} + static const struct net_device_ops tg3_netdev_ops = { .ndo_open = tg3_open, .ndo_stop = tg3_close, -- cgit v1.2.3 From 73f98eab9b9e0bab492ca06add5657d9e702ddb1 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 29 Feb 2012 21:17:08 +0000 Subject: pch_gbe: memory corruption calling pch_gbe_validate_option() pch_gbe_validate_option() modifies 32 bits of memory but we pass &hw->phy.autoneg_advertised which only has 16 bits and &hw->mac.fc which only has 8 bits. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c index 9cb5f912e489..29e23bec809c 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c @@ -321,10 +321,10 @@ static void pch_gbe_check_copper_options(struct pch_gbe_adapter *adapter) pr_debug("AutoNeg specified along with Speed or Duplex, AutoNeg parameter ignored\n"); hw->phy.autoneg_advertised = opt.def; } else { - hw->phy.autoneg_advertised = AutoNeg; - pch_gbe_validate_option( - (int *)(&hw->phy.autoneg_advertised), - &opt, adapter); + int tmp = AutoNeg; + + pch_gbe_validate_option(&tmp, &opt, adapter); + hw->phy.autoneg_advertised = tmp; } } @@ -495,9 +495,10 @@ void pch_gbe_check_options(struct pch_gbe_adapter *adapter) .arg = { .l = { .nr = (int)ARRAY_SIZE(fc_list), .p = fc_list } } }; - hw->mac.fc = FlowControl; - pch_gbe_validate_option((int *)(&hw->mac.fc), - &opt, adapter); + int tmp = FlowControl; + + pch_gbe_validate_option(&tmp, &opt, adapter); + hw->mac.fc = tmp; } pch_gbe_check_copper_options(adapter); -- cgit v1.2.3 From 413708bbaf5c85c4c8a264145f7d6c3afcd97f99 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 29 Feb 2012 21:19:54 +0000 Subject: enic: fix an endian bug in enic_probe() "num_vfs" is a u32 but we only use the high 16 bits and the low 16bits are left as zero. That isn't a problem for little endian systems but it will break on big endian ones. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/ethernet/cisco/enic/enic.h | 2 +- drivers/net/ethernet/cisco/enic/enic_main.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/cisco/enic/enic.h b/drivers/net/ethernet/cisco/enic/enic.h index ee93a2087fe6..c52295cd05ef 100644 --- a/drivers/net/ethernet/cisco/enic/enic.h +++ b/drivers/net/ethernet/cisco/enic/enic.h @@ -94,7 +94,7 @@ struct enic { u32 rx_coalesce_usecs; u32 tx_coalesce_usecs; #ifdef CONFIG_PCI_IOV - u32 num_vfs; + u16 num_vfs; #endif struct enic_port_profile *pp; diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c index ab3f67f980d8..0e4edd3b6bee 100644 --- a/drivers/net/ethernet/cisco/enic/enic_main.c +++ b/drivers/net/ethernet/cisco/enic/enic_main.c @@ -2370,7 +2370,7 @@ static int __devinit enic_probe(struct pci_dev *pdev, pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV); if (pos) { pci_read_config_word(pdev, pos + PCI_SRIOV_TOTAL_VF, - (u16 *)&enic->num_vfs); + &enic->num_vfs); if (enic->num_vfs) { err = pci_enable_sriov(pdev, enic->num_vfs); if (err) { -- cgit v1.2.3 From efead8710aad9e384730ecf25eae0287878840d7 Mon Sep 17 00:00:00 2001 From: Shreyas Bhatewara Date: Tue, 28 Feb 2012 22:17:38 +0000 Subject: vmxnet3: Fix transport header size Fix transport header size Fix the transpoert header size for UDP packets. Signed-off-by: Shreyas N Bhatewara Signed-off-by: David S. Miller --- drivers/net/vmxnet3/vmxnet3_drv.c | 7 +------ drivers/net/vmxnet3/vmxnet3_int.h | 4 ++-- 2 files changed, 3 insertions(+), 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index 3dcd3857a36c..756c0f5565a5 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -830,13 +830,8 @@ vmxnet3_parse_and_copy_hdr(struct sk_buff *skb, struct vmxnet3_tx_queue *tq, ctx->l4_hdr_size = ((struct tcphdr *) skb_transport_header(skb))->doff * 4; else if (iph->protocol == IPPROTO_UDP) - /* - * Use tcp header size so that bytes to - * be copied are more than required by - * the device. - */ ctx->l4_hdr_size = - sizeof(struct tcphdr); + sizeof(struct udphdr); else ctx->l4_hdr_size = 0; } else { diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h index ed54797db191..fc46a81ad538 100644 --- a/drivers/net/vmxnet3/vmxnet3_int.h +++ b/drivers/net/vmxnet3/vmxnet3_int.h @@ -70,10 +70,10 @@ /* * Version numbers */ -#define VMXNET3_DRIVER_VERSION_STRING "1.1.18.0-k" +#define VMXNET3_DRIVER_VERSION_STRING "1.1.29.0-k" /* a 32-bit int, each byte encode a verion number in VMXNET3_DRIVER_VERSION */ -#define VMXNET3_DRIVER_VERSION_NUM 0x01011200 +#define VMXNET3_DRIVER_VERSION_NUM 0x01011D00 #if defined(CONFIG_PCI_MSI) /* RSS only makes sense if MSI-X is supported. */ -- cgit v1.2.3 From 3f2010b2ad3d66d5291497c9b274315e7b807ecd Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Fri, 2 Mar 2012 13:38:56 +0000 Subject: packetengines: fix config default As part of the big network driver reorg, each vendor directory defaults to yes, so that older config's can migrate correctly. Looks like this one got missed. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/ethernet/packetengines/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/packetengines/Kconfig b/drivers/net/ethernet/packetengines/Kconfig index b97132d9dff0..8f29feb35548 100644 --- a/drivers/net/ethernet/packetengines/Kconfig +++ b/drivers/net/ethernet/packetengines/Kconfig @@ -4,6 +4,7 @@ config NET_PACKET_ENGINE bool "Packet Engine devices" + default y depends on PCI ---help--- If you have a network (Ethernet) card belonging to this class, say Y -- cgit v1.2.3 From 9c5028e9da1255dd2b99762d8627b88b29f68cce Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?fran=C3=A7ois=20romieu?= Date: Fri, 2 Mar 2012 04:43:14 +0000 Subject: r8169: corrupted IP fragments fix for large mtu. Noticed with the 8168d (-vb-gr, aka RTL_GIGA_MAC_VER_26). ConfigX registers should only be written while the Config9346 lock is held. Signed-off-by: Francois Romieu Reported-by: Nick Bowler Cc: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 7a0c800b50ad..1adf17757cea 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -3781,12 +3781,20 @@ static void rtl8169_init_ring_indexes(struct rtl8169_private *tp) static void rtl_hw_jumbo_enable(struct rtl8169_private *tp) { + void __iomem *ioaddr = tp->mmio_addr; + + RTL_W8(Cfg9346, Cfg9346_Unlock); rtl_generic_op(tp, tp->jumbo_ops.enable); + RTL_W8(Cfg9346, Cfg9346_Lock); } static void rtl_hw_jumbo_disable(struct rtl8169_private *tp) { + void __iomem *ioaddr = tp->mmio_addr; + + RTL_W8(Cfg9346, Cfg9346_Unlock); rtl_generic_op(tp, tp->jumbo_ops.disable); + RTL_W8(Cfg9346, Cfg9346_Lock); } static void r8168c_hw_jumbo_enable(struct rtl8169_private *tp) -- cgit v1.2.3 From 182ada1c712a4ebe14d6a023cfab3559b2527d69 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 4 Mar 2012 08:31:35 -0800 Subject: iwlwifi: fix wowlan suspend This was broken by the commit 023ca58f1 "iwlwifi: Move the core suspend function to iwl-agn-lib" where for some reason the code changed while moving, from .len[0] = sizeof(*key_data.rsc_tsc), to .len[0] = sizeof(key_data.rsc_tsc), Cc: stable@kernel.org Signed-off-by: Johannes Berg Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn-lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c index 64cf439035c3..ca78e91de86c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c @@ -1240,7 +1240,7 @@ int iwlagn_suspend(struct iwl_priv *priv, .flags = CMD_SYNC, .data[0] = key_data.rsc_tsc, .dataflags[0] = IWL_HCMD_DFL_NOCOPY, - .len[0] = sizeof(key_data.rsc_tsc), + .len[0] = sizeof(*key_data.rsc_tsc), }; ret = iwl_trans_send_cmd(trans(priv), &rsc_tsc_cmd); -- cgit v1.2.3 From 9d1dfc06b14df0818d86d6ba6aaec0f641e94990 Mon Sep 17 00:00:00 2001 From: Santosh Nayak Date: Fri, 2 Mar 2012 05:09:05 +0000 Subject: qla3xxx: ethernet: Fix bogus interrupt state flag. In 'ql_adapter_initialize' the first call for 'spin_unlock_irqrestore()' is with hw_flags = 0, which is as good as 'spin_unlock_irq()' (unconditional interrupt enabling). If this is intended, then for better performance 'spin_unlock_irqrestore()' can be replaced with 'spin_unlock_irq()' and 'spin_lock_irqsave()' can be replaced by 'spin_lock_irq() Signed-off-by: Santosh Nayak Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qla3xxx.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qla3xxx.c b/drivers/net/ethernet/qlogic/qla3xxx.c index 7931531c3a40..e61560e16385 100644 --- a/drivers/net/ethernet/qlogic/qla3xxx.c +++ b/drivers/net/ethernet/qlogic/qla3xxx.c @@ -3017,7 +3017,6 @@ static int ql_adapter_initialize(struct ql3_adapter *qdev) (void __iomem *)port_regs; u32 delay = 10; int status = 0; - unsigned long hw_flags = 0; if (ql_mii_setup(qdev)) return -1; @@ -3228,9 +3227,9 @@ static int ql_adapter_initialize(struct ql3_adapter *qdev) value = ql_read_page0_reg(qdev, &port_regs->portStatus); if (value & PORT_STATUS_IC) break; - spin_unlock_irqrestore(&qdev->hw_lock, hw_flags); + spin_unlock_irq(&qdev->hw_lock); msleep(500); - spin_lock_irqsave(&qdev->hw_lock, hw_flags); + spin_lock_irq(&qdev->hw_lock); } while (--delay); if (delay == 0) { -- cgit v1.2.3 From 5cb917bc4f3882ecee87064483111023086757d3 Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Mon, 5 Mar 2012 19:53:50 +0000 Subject: tg3: Fix to use multi queue BQL interfaces Fix tg3 to use BQL multi queue related netdev interfaces since the device supports multi queue. Signed-off-by: Tom Herbert Reported-by: Christoph Lameter Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 423d0235a878..35c2a202d67a 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -5352,7 +5352,7 @@ static void tg3_tx(struct tg3_napi *tnapi) } } - netdev_completed_queue(tp->dev, pkts_compl, bytes_compl); + netdev_tx_completed_queue(txq, pkts_compl, bytes_compl); tnapi->tx_cons = sw_idx; @@ -6793,7 +6793,7 @@ static netdev_tx_t tg3_start_xmit(struct sk_buff *skb, struct net_device *dev) } skb_tx_timestamp(skb); - netdev_sent_queue(tp->dev, skb->len); + netdev_tx_sent_queue(txq, skb->len); /* Packets are ready, update Tx producer idx local and on card. */ tw32_tx_mbox(tnapi->prodmbox, entry); @@ -7275,8 +7275,8 @@ static void tg3_free_rings(struct tg3 *tp) dev_kfree_skb_any(skb); } + netdev_tx_reset_queue(netdev_get_tx_queue(tp->dev, j)); } - netdev_reset_queue(tp->dev); } /* Initialize tx/rx rings for packet processing. -- cgit v1.2.3 From 2a15cd2ff488a9fdb55e5e34060f499853b27c77 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?fran=C3=A7ois=20romieu?= Date: Tue, 6 Mar 2012 01:14:12 +0000 Subject: r8169: runtime resume before shutdown. With runtime PM, if the ethernet cable is disconnected, the device is transitioned to D3 state to conserve energy. If the system is shutdown in this state, any register accesses in rtl_shutdown are dropped on the floor. As the device was programmed by .runtime_suspend() to wake on link changes, it is thus brought back up as soon as the link recovers. Resuming every suspended device through the driver core would slow things down and it is not clear how many devices really need it now. Original report and D0 transition patch by Sameer Nanda. Patch has been changed to comply with advices by Rafael J. Wysocki and the PM folks. Reported-by: Sameer Nanda Signed-off-by: Francois Romieu Cc: Rafael J. Wysocki Cc: Hayes Wang Cc: Alan Stern Acked-by: Rafael J. Wysocki Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 1adf17757cea..bbacb3741ec0 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -6194,6 +6194,9 @@ static void rtl_shutdown(struct pci_dev *pdev) { struct net_device *dev = pci_get_drvdata(pdev); struct rtl8169_private *tp = netdev_priv(dev); + struct device *d = &pdev->dev; + + pm_runtime_get_sync(d); rtl8169_net_suspend(dev); @@ -6215,6 +6218,8 @@ static void rtl_shutdown(struct pci_dev *pdev) pci_wake_from_d3(pdev, true); pci_set_power_state(pdev, PCI_D3hot); } + + pm_runtime_put_noidle(d); } static struct pci_driver rtl8169_pci_driver = { -- cgit v1.2.3 From 1d4526e037ad9788b5d164862d629fa7c4c5f27b Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Tue, 6 Mar 2012 03:05:14 +0000 Subject: mlx4_core: remove buggy sched_queue masking Fixes a bug introduced by commit fe9a2603c, where the priority bits in the schedule queue field were masked out. Signed-off-by: Amir Vadai Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/qp.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx4/qp.c b/drivers/net/ethernet/mellanox/mlx4/qp.c index 738f950a1ce5..fb2b36759cbf 100644 --- a/drivers/net/ethernet/mellanox/mlx4/qp.c +++ b/drivers/net/ethernet/mellanox/mlx4/qp.c @@ -151,11 +151,6 @@ static int __mlx4_qp_modify(struct mlx4_dev *dev, struct mlx4_mtt *mtt, context->log_page_size = mtt->page_shift - MLX4_ICM_PAGE_SHIFT; } - port = ((context->pri_path.sched_queue >> 6) & 1) + 1; - if (dev->caps.port_type[port] == MLX4_PORT_TYPE_ETH) - context->pri_path.sched_queue = (context->pri_path.sched_queue & - 0xc3); - *(__be32 *) mailbox->buf = cpu_to_be32(optpar); memcpy(mailbox->buf + 8, context, sizeof *context); -- cgit v1.2.3 From f637d577cfe7b9fabf09a7e6a3c59f62b3225cd5 Mon Sep 17 00:00:00 2001 From: Vipul Pandya Date: Mon, 5 Mar 2012 22:56:36 +0000 Subject: cxgb4: Add support for Chelsio's T480-CR and T440-LP-CR adapters This patch adds PCI device ids for Chelsio's T480-CR and T440-LP-CR adapters. Signed-off-by: Vipul Pandya Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index e83d12c7bf20..9d76e59d9526 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -196,6 +196,8 @@ static DEFINE_PCI_DEVICE_TABLE(cxgb4_pci_tbl) = { CH_DEVICE(0x4408, 4), CH_DEVICE(0x4409, 4), CH_DEVICE(0x440a, 4), + CH_DEVICE(0x440d, 4), + CH_DEVICE(0x440e, 4), { 0, } }; -- cgit v1.2.3 From 79421b4eaef12f0ce392ed5229aff6401ed4196c Mon Sep 17 00:00:00 2001 From: Vipul Pandya Date: Mon, 5 Mar 2012 22:56:37 +0000 Subject: cxgb4vf: Add support for Chelsio's T480-CR and T440-LP-CR adapters This patch adds PCI device ids for Chelsio's T480-CR and T440-LP-CR adapters. Signed-off-by: Vipul Pandya Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c index e53365a71484..d963c1d57f71 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c @@ -2892,6 +2892,8 @@ static struct pci_device_id cxgb4vf_pci_tbl[] = { CH_DEVICE(0x4808, 0), /* T420-cx */ CH_DEVICE(0x4809, 0), /* T420-bt */ CH_DEVICE(0x480a, 0), /* T404-bt */ + CH_DEVICE(0x480d, 0), /* T480-cr */ + CH_DEVICE(0x480e, 0), /* T440-lp-cr */ { 0, } }; -- cgit v1.2.3 From 34efc283a56adaef5756ac93065f46608674ea7d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Sjur=20Br=C3=A6ndeland?= Date: Sun, 4 Mar 2012 08:38:58 +0000 Subject: caif-hsi: Set default MTU to 4096 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Default MTU for CAIF HSI was wrongly set to 15 * 4092 bytes. The patch sets default MTU size to 4096. Signed-off-by: Sjur Brændeland Signed-off-by: David S. Miller --- drivers/net/caif/caif_hsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/caif/caif_hsi.c b/drivers/net/caif/caif_hsi.c index 0a4fc62a381d..c998e1afebc6 100644 --- a/drivers/net/caif/caif_hsi.c +++ b/drivers/net/caif/caif_hsi.c @@ -978,7 +978,7 @@ static void cfhsi_setup(struct net_device *dev) dev->netdev_ops = &cfhsi_ops; dev->type = ARPHRD_CAIF; dev->flags = IFF_POINTOPOINT | IFF_NOARP; - dev->mtu = CFHSI_MAX_PAYLOAD_SZ; + dev->mtu = CFHSI_MAX_CAIF_FRAME_SZ; dev->tx_queue_len = 0; dev->destructor = free_netdev; skb_queue_head_init(&cfhsi->qhead); -- cgit v1.2.3 From 09c1d446fe0e2e3f34b366a6b3c1b19efa1522af Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 6 Mar 2012 19:46:41 +0000 Subject: ehea: restore multicast and rx_errors fields Commit 239c562c94d (ehea: Add 64bit statistics) added a regression, since we no longer report multicast & rx_errors fields, taken from port->stats structure. These fields are updated in ehea_update_stats() every second. Signed-off-by: Eric Dumazet Cc: Anton Blanchard Cc: Thadeu Lima de Souza Cascardo Acked-by: Thadeu Lima de Souza Cascardo Tested-by: Thadeu Lima de Souza Cascardo Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ehea/ehea_main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/ibm/ehea/ehea_main.c b/drivers/net/ethernet/ibm/ehea/ehea_main.c index 5d5fb2627184..e6893cdfd13b 100644 --- a/drivers/net/ethernet/ibm/ehea/ehea_main.c +++ b/drivers/net/ethernet/ibm/ehea/ehea_main.c @@ -336,7 +336,9 @@ static struct rtnl_link_stats64 *ehea_get_stats64(struct net_device *dev, stats->tx_bytes = tx_bytes; stats->rx_packets = rx_packets; - return &port->stats; + stats->multicast = port->stats.multicast; + stats->rx_errors = port->stats.rx_errors; + return stats; } static void ehea_update_stats(struct work_struct *work) -- cgit v1.2.3 From 783154573236f46b730b2eea17d2e6e04bdb3251 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 7 Mar 2012 00:02:04 +0000 Subject: atl1c: set ATL1C_WORK_EVENT_RESET bit correctly ATL1C_WORK_EVENT_RESET is zero so the original code here is a nop. The intent was to set the zero bit. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c index 1ff3c6df35a2..47a9bb2c813c 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c @@ -1710,7 +1710,7 @@ static irqreturn_t atl1c_intr(int irq, void *data) "atl1c hardware error (status = 0x%x)\n", status & ISR_ERROR); /* reset MAC */ - adapter->work_event |= ATL1C_WORK_EVENT_RESET; + set_bit(ATL1C_WORK_EVENT_RESET, &adapter->work_event); schedule_work(&adapter->common_task); return IRQ_HANDLED; } -- cgit v1.2.3 From dcf353b17007841f91e1735e33790508c84c9ad0 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Wed, 7 Mar 2012 05:56:35 +0000 Subject: mlx4_core: fix bug in modify_cq wrapper for resize flow. The actual FW command is called in procedure "handle_resize". Code incorrectly invoked the FW command again (in good flow), in the modify_cq wrapper function. Fix by skipping second FW invocation unconditionally for resize. Signed-off-by: Jack Morgenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/resource_tracker.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index bfdb7af19e49..8752e6e08169 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -2255,8 +2255,7 @@ int mlx4_MODIFY_CQ_wrapper(struct mlx4_dev *dev, int slave, if (vhcr->op_modifier == 0) { err = handle_resize(dev, slave, vhcr, inbox, outbox, cmd, cq); - if (err) - goto ex_put; + goto ex_put; } err = mlx4_DMA_wrapper(dev, slave, vhcr, inbox, outbox, cmd); -- cgit v1.2.3 From 4231d47e6fe69f061f96c98c30eaf9fb4c14b96d Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Wed, 7 Mar 2012 10:19:28 +0000 Subject: net/usbnet: avoid recursive locking in usbnet_stop() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit |kernel BUG at kernel/rtmutex.c:724! |[] (rt_spin_lock_slowlock+0x108/0x2bc) from [] (defer_bh+0x1c/0xb4) |[] (defer_bh+0x1c/0xb4) from [] (rx_complete+0x14c/0x194) |[] (rx_complete+0x14c/0x194) from [] (usb_hcd_giveback_urb+0xa0/0xf0) |[] (usb_hcd_giveback_urb+0xa0/0xf0) from [] (musb_giveback+0x34/0x40) |[] (musb_giveback+0x34/0x40) from [] (musb_advance_schedule+0xb4/0x1c0) |[] (musb_advance_schedule+0xb4/0x1c0) from [] (musb_cleanup_urb.isra.9+0x80/0x8c) |[] (musb_cleanup_urb.isra.9+0x80/0x8c) from [] (musb_urb_dequeue+0xec/0x108) |[] (musb_urb_dequeue+0xec/0x108) from [] (unlink1+0xbc/0xcc) |[] (unlink1+0xbc/0xcc) from [] (usb_hcd_unlink_urb+0x54/0xa8) |[] (usb_hcd_unlink_urb+0x54/0xa8) from [] (unlink_urbs.isra.17+0x2c/0x58) |[] (unlink_urbs.isra.17+0x2c/0x58) from [] (usbnet_terminate_urbs+0x94/0x10c) |[] (usbnet_terminate_urbs+0x94/0x10c) from [] (usbnet_stop+0x100/0x15c) |[] (usbnet_stop+0x100/0x15c) from [] (__dev_close_many+0x94/0xc8) defer_bh() takes the lock which is hold during unlink_urbs(). The safe walk suggest that the skb will be removed from the list and this is done by defer_bh() so it seems to be okay to drop the lock here. Cc: stable@kernel.org Reported-by: Aníbal Almeida Pinto Signed-off-by: Sebastian Andrzej Siewior Acked-by: Oliver Neukum Signed-off-by: David S. Miller --- drivers/net/usb/usbnet.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index fae0fbd8bc88..81b96e303757 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -589,6 +589,7 @@ static int unlink_urbs (struct usbnet *dev, struct sk_buff_head *q) entry = (struct skb_data *) skb->cb; urb = entry->urb; + spin_unlock_irqrestore(&q->lock, flags); // during some PM-driven resume scenarios, // these (async) unlinks complete immediately retval = usb_unlink_urb (urb); @@ -596,6 +597,7 @@ static int unlink_urbs (struct usbnet *dev, struct sk_buff_head *q) netdev_dbg(dev->net, "unlink urb err, %d\n", retval); else count++; + spin_lock_irqsave(&q->lock, flags); } spin_unlock_irqrestore (&q->lock, flags); return count; -- cgit v1.2.3 From d31b20fcc89efa8c5d3f5ea2720e08a286b69a36 Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Wed, 7 Mar 2012 10:02:00 +0000 Subject: net/hyperv: Use the built-in macro KBUILD_MODNAME for this driver Signed-off-by: Haiyang Zhang Signed-off-by: K. Y. Srinivasan Cc: Olaf Hering Signed-off-by: David S. Miller --- drivers/net/hyperv/netvsc_drv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index 466c58a7353d..bf01841bda5b 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -313,7 +313,7 @@ int netvsc_recv_callback(struct hv_device *device_obj, static void netvsc_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info) { - strcpy(info->driver, "hv_netvsc"); + strcpy(info->driver, KBUILD_MODNAME); strcpy(info->version, HV_DRV_VERSION); strcpy(info->fw_version, "N/A"); } @@ -485,7 +485,7 @@ MODULE_DEVICE_TABLE(vmbus, id_table); /* The one and only one */ static struct hv_driver netvsc_drv = { - .name = "netvsc", + .name = KBUILD_MODNAME, .id_table = id_table, .probe = netvsc_probe, .remove = netvsc_remove, -- cgit v1.2.3