From bd354c01cb175c50533899743e0e5736e3e36ab0 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Tue, 8 Jun 2021 10:12:21 -0700 Subject: proc: Track /proc/$pid/attr/ opener mm_struct commit 591a22c14d3f45cc38bd1931c593c221df2f1881 upstream. Commit bfb819ea20ce ("proc: Check /proc/$pid/attr/ writes against file opener") tried to make sure that there could not be a confusion between the opener of a /proc/$pid/attr/ file and the writer. It used struct cred to make sure the privileges didn't change. However, there were existing cases where a more privileged thread was passing the opened fd to a differently privileged thread (during container setup). Instead, use mm_struct to track whether the opener and writer are still the same process. (This is what several other proc files already do, though for different reasons.) Reported-by: Christian Brauner Reported-by: Andrea Righi Tested-by: Andrea Righi Fixes: bfb819ea20ce ("proc: Check /proc/$pid/attr/ writes against file opener") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman --- fs/proc/base.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/fs/proc/base.c b/fs/proc/base.c index 2166f24af37e..d2428d20d5a9 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -2384,6 +2384,11 @@ out: } #ifdef CONFIG_SECURITY +static int proc_pid_attr_open(struct inode *inode, struct file *file) +{ + return __mem_open(inode, file, PTRACE_MODE_READ_FSCREDS); +} + static ssize_t proc_pid_attr_read(struct file * file, char __user * buf, size_t count, loff_t *ppos) { @@ -2414,7 +2419,7 @@ static ssize_t proc_pid_attr_write(struct file * file, const char __user * buf, struct task_struct *task = get_proc_task(inode); /* A task may only write when it was the opener. */ - if (file->f_cred != current_real_cred()) + if (file->private_data != current->mm) return -EPERM; length = -ESRCH; @@ -2455,9 +2460,11 @@ out_no_task: } static const struct file_operations proc_pid_attr_operations = { + .open = proc_pid_attr_open, .read = proc_pid_attr_read, .write = proc_pid_attr_write, .llseek = generic_file_llseek, + .release = mem_release, }; static const struct pid_entry attr_dir_stuff[] = { -- cgit v1.2.3 From c08e0be44759d0b5affc5888be4aa5e536873335 Mon Sep 17 00:00:00 2001 From: Jeimon Date: Sat, 8 May 2021 11:52:30 +0800 Subject: net/nfc/rawsock.c: fix a permission check bug [ Upstream commit 8ab78863e9eff11910e1ac8bcf478060c29b379e ] The function rawsock_create() calls a privileged function sk_alloc(), which requires a ns-aware check to check net->user_ns, i.e., ns_capable(). However, the original code checks the init_user_ns using capable(). So we replace the capable() with ns_capable(). Signed-off-by: Jeimon Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- net/nfc/rawsock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/nfc/rawsock.c b/net/nfc/rawsock.c index 92a3cfae4de8..2fba626a0125 100644 --- a/net/nfc/rawsock.c +++ b/net/nfc/rawsock.c @@ -345,7 +345,7 @@ static int rawsock_create(struct net *net, struct socket *sock, return -ESOCKTNOSUPPORT; if (sock->type == SOCK_RAW) { - if (!capable(CAP_NET_RAW)) + if (!ns_capable(net->user_ns, CAP_NET_RAW)) return -EPERM; sock->ops = &rawsock_raw_ops; } else { -- cgit v1.2.3 From 62d2083f546edd0facfd6b2bcd8e2661bd581cd8 Mon Sep 17 00:00:00 2001 From: Zou Wei Date: Wed, 12 May 2021 11:12:25 +0800 Subject: ASoC: sti-sas: add missing MODULE_DEVICE_TABLE [ Upstream commit e072b2671606c77538d6a4dd5dda80b508cb4816 ] This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by: Hulk Robot Signed-off-by: Zou Wei Link: https://lore.kernel.org/r/1620789145-14936-1-git-send-email-zou_wei@huawei.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- sound/soc/codecs/sti-sas.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/sti-sas.c b/sound/soc/codecs/sti-sas.c index 160d61a66204..71a1fde5a7ef 100644 --- a/sound/soc/codecs/sti-sas.c +++ b/sound/soc/codecs/sti-sas.c @@ -542,6 +542,7 @@ static const struct of_device_id sti_sas_dev_match[] = { }, {}, }; +MODULE_DEVICE_TABLE(of, sti_sas_dev_match); static int sti_sas_driver_probe(struct platform_device *pdev) { -- cgit v1.2.3 From 958cb1078ca60d214826fd90a0961a447fade59a Mon Sep 17 00:00:00 2001 From: Zheyu Ma Date: Sun, 16 May 2021 07:11:40 +0000 Subject: isdn: mISDN: netjet: Fix crash in nj_probe: [ Upstream commit 9f6f852550d0e1b7735651228116ae9d300f69b3 ] 'nj_setup' in netjet.c might fail with -EIO and in this case 'card->irq' is initialized and is bigger than zero. A subsequent call to 'nj_release' will free the irq that has not been requested. Fix this bug by deleting the previous assignment to 'card->irq' and just keep the assignment before 'request_irq'. The KASAN's log reveals it: [ 3.354615 ] WARNING: CPU: 0 PID: 1 at kernel/irq/manage.c:1826 free_irq+0x100/0x480 [ 3.355112 ] Modules linked in: [ 3.355310 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00144-g25a1298726e #13 [ 3.355816 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.356552 ] RIP: 0010:free_irq+0x100/0x480 [ 3.356820 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80 [ 3.358012 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082 [ 3.358357 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX: 0000000000000000 [ 3.358814 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI: 00000000ffffffff [ 3.359272 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09: 0000000000000000 [ 3.359732 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12: 0000000000000000 [ 3.360195 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15: ffff888104dc80a8 [ 3.360652 ] FS: 0000000000000000(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 [ 3.361170 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.361538 ] CR2: 0000000000000000 CR3: 000000000582e000 CR4: 00000000000006f0 [ 3.362003 ] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3.362175 ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3.362175 ] Call Trace: [ 3.362175 ] nj_release+0x51/0x1e0 [ 3.362175 ] nj_probe+0x450/0x950 [ 3.362175 ] ? pci_device_remove+0x110/0x110 [ 3.362175 ] local_pci_probe+0x45/0xa0 [ 3.362175 ] pci_device_probe+0x12b/0x1d0 [ 3.362175 ] really_probe+0x2a9/0x610 [ 3.362175 ] driver_probe_device+0x90/0x1d0 [ 3.362175 ] ? mutex_lock_nested+0x1b/0x20 [ 3.362175 ] device_driver_attach+0x68/0x70 [ 3.362175 ] __driver_attach+0x124/0x1b0 [ 3.362175 ] ? device_driver_attach+0x70/0x70 [ 3.362175 ] bus_for_each_dev+0xbb/0x110 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] driver_attach+0x27/0x30 [ 3.362175 ] bus_add_driver+0x1eb/0x2a0 [ 3.362175 ] driver_register+0xa9/0x180 [ 3.362175 ] __pci_register_driver+0x82/0x90 [ 3.362175 ] ? w6692_init+0x38/0x38 [ 3.362175 ] nj_init+0x36/0x38 [ 3.362175 ] do_one_initcall+0x7f/0x3d0 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] ? rcu_read_lock_sched_held+0x4f/0x80 [ 3.362175 ] kernel_init_freeable+0x2aa/0x301 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] kernel_init+0x18/0x190 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ret_from_fork+0x1f/0x30 [ 3.362175 ] Kernel panic - not syncing: panic_on_warn set ... [ 3.362175 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00144-g25a1298726e #13 [ 3.362175 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.362175 ] Call Trace: [ 3.362175 ] dump_stack+0xba/0xf5 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] panic+0x15a/0x3f2 [ 3.362175 ] ? __warn+0xf2/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] __warn+0x108/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] report_bug+0x119/0x1c0 [ 3.362175 ] handle_bug+0x3b/0x80 [ 3.362175 ] exc_invalid_op+0x18/0x70 [ 3.362175 ] asm_exc_invalid_op+0x12/0x20 [ 3.362175 ] RIP: 0010:free_irq+0x100/0x480 [ 3.362175 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80 [ 3.362175 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082 [ 3.362175 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX: 0000000000000000 [ 3.362175 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI: 00000000ffffffff [ 3.362175 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09: 0000000000000000 [ 3.362175 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12: 0000000000000000 [ 3.362175 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15: ffff888104dc80a8 [ 3.362175 ] ? vprintk+0x76/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] nj_release+0x51/0x1e0 [ 3.362175 ] nj_probe+0x450/0x950 [ 3.362175 ] ? pci_device_remove+0x110/0x110 [ 3.362175 ] local_pci_probe+0x45/0xa0 [ 3.362175 ] pci_device_probe+0x12b/0x1d0 [ 3.362175 ] really_probe+0x2a9/0x610 [ 3.362175 ] driver_probe_device+0x90/0x1d0 [ 3.362175 ] ? mutex_lock_nested+0x1b/0x20 [ 3.362175 ] device_driver_attach+0x68/0x70 [ 3.362175 ] __driver_attach+0x124/0x1b0 [ 3.362175 ] ? device_driver_attach+0x70/0x70 [ 3.362175 ] bus_for_each_dev+0xbb/0x110 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] driver_attach+0x27/0x30 [ 3.362175 ] bus_add_driver+0x1eb/0x2a0 [ 3.362175 ] driver_register+0xa9/0x180 [ 3.362175 ] __pci_register_driver+0x82/0x90 [ 3.362175 ] ? w6692_init+0x38/0x38 [ 3.362175 ] nj_init+0x36/0x38 [ 3.362175 ] do_one_initcall+0x7f/0x3d0 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] ? rcu_read_lock_sched_held+0x4f/0x80 [ 3.362175 ] kernel_init_freeable+0x2aa/0x301 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] kernel_init+0x18/0x190 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ret_from_fork+0x1f/0x30 [ 3.362175 ] Dumping ftrace buffer: [ 3.362175 ] (ftrace buffer empty) [ 3.362175 ] Kernel Offset: disabled [ 3.362175 ] Rebooting in 1 seconds.. Reported-by: Zheyu Ma Signed-off-by: Zheyu Ma Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/isdn/hardware/mISDN/netjet.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/isdn/hardware/mISDN/netjet.c b/drivers/isdn/hardware/mISDN/netjet.c index 8e2944784e00..59eec2014b82 100644 --- a/drivers/isdn/hardware/mISDN/netjet.c +++ b/drivers/isdn/hardware/mISDN/netjet.c @@ -1114,7 +1114,6 @@ nj_probe(struct pci_dev *pdev, const struct pci_device_id *ent) card->typ = NETJET_S_TJ300; card->base = pci_resource_start(pdev, 0); - card->irq = pdev->irq; pci_set_drvdata(pdev, card); err = setup_instance(card); if (err) -- cgit v1.2.3 From 818298d54aa0d7b3baf5635c94ff3b39b48d037f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 17 May 2021 16:13:35 +0200 Subject: bonding: init notify_work earlier to avoid uninitialized use [ Upstream commit 35d96e631860226d5dc4de0fad0a415362ec2457 ] If bond_kobj_init() or later kzalloc() in bond_alloc_slave() fail, then we call kobject_put() on the slave->kobj. This in turn calls the release function slave_kobj_release() which will always try to cancel_delayed_work_sync(&slave->notify_work), which shouldn't be done on an uninitialized work struct. Always initialize the work struct earlier to avoid problems here. Syzbot bisected this down to a completely pointless commit, some fault injection may have been at work here that caused the alloc failure in the first place, which may interact badly with bisect. Reported-by: syzbot+bfda097c12a00c8cae67@syzkaller.appspotmail.com Signed-off-by: Johannes Berg Acked-by: Jay Vosburgh Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/bonding/bond_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index a33e8a3b5f0a..d6363ae22052 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1267,6 +1267,7 @@ static struct slave *bond_alloc_slave(struct bonding *bond, slave->bond = bond; slave->dev = slave_dev; + INIT_DELAYED_WORK(&slave->notify_work, bond_netdev_notify_work); if (bond_kobj_init(slave)) return NULL; @@ -1279,7 +1280,6 @@ static struct slave *bond_alloc_slave(struct bonding *bond, return NULL; } } - INIT_DELAYED_WORK(&slave->notify_work, bond_netdev_notify_work); return slave; } -- cgit v1.2.3 From 5f155c4046200f067b1dc3140ea99ef56e4e0b74 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 17 May 2021 16:38:09 +0200 Subject: netlink: disable IRQs for netlink_lock_table() [ Upstream commit 1d482e666b8e74c7555dbdfbfb77205eeed3ff2d ] Syzbot reports that in mac80211 we have a potential deadlock between our "local->stop_queue_reasons_lock" (spinlock) and netlink's nl_table_lock (rwlock). This is because there's at least one situation in which we might try to send a netlink message with this spinlock held while it is also possible to take the spinlock from a hardirq context, resulting in the following deadlock scenario reported by lockdep: CPU0 CPU1 ---- ---- lock(nl_table_lock); local_irq_disable(); lock(&local->queue_stop_reason_lock); lock(nl_table_lock); lock(&local->queue_stop_reason_lock); This seems valid, we can take the queue_stop_reason_lock in any kind of context ("CPU0"), and call ieee80211_report_ack_skb() with the spinlock held and IRQs disabled ("CPU1") in some code path (ieee80211_do_stop() via ieee80211_free_txskb()). Short of disallowing netlink use in scenarios like these (which would be rather complex in mac80211's case due to the deep callchain), it seems the only fix for this is to disable IRQs while nl_table_lock is held to avoid hitting this scenario, this disallows the "CPU0" portion of the reported deadlock. Note that the writer side (netlink_table_grab()) already disables IRQs for this lock. Unfortunately though, this seems like a huge hammer, and maybe the whole netlink table locking should be reworked. Reported-by: syzbot+69ff9dff50dcfe14ddd4@syzkaller.appspotmail.com Signed-off-by: Johannes Berg Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- net/netlink/af_netlink.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index cc37a219e11e..c20c41801845 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -436,11 +436,13 @@ void netlink_table_ungrab(void) static inline void netlink_lock_table(void) { + unsigned long flags; + /* read_lock() synchronizes us to netlink_table_grab */ - read_lock(&nl_table_lock); + read_lock_irqsave(&nl_table_lock, flags); atomic_inc(&nl_table_users); - read_unlock(&nl_table_lock); + read_unlock_irqrestore(&nl_table_lock, flags); } static inline void -- cgit v1.2.3 From 38fe49aae205d010ce9a40f8b95cb7772b91cabf Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 17 May 2021 12:04:13 +0300 Subject: net: mdiobus: get rid of a BUG_ON() [ Upstream commit 1dde47a66d4fb181830d6fa000e5ea86907b639e ] We spotted a bug recently during a review where a driver was unregistering a bus that wasn't registered, which would trigger this BUG_ON(). Let's handle that situation more gracefully, and just print a warning and return. Reported-by: Russell King (Oracle) Signed-off-by: Dan Carpenter Reviewed-by: Russell King (Oracle) Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/phy/mdio_bus.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index ccefba7af960..5ea86fd57ae6 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -308,7 +308,8 @@ void mdiobus_unregister(struct mii_bus *bus) { int i; - BUG_ON(bus->state != MDIOBUS_REGISTERED); + if (WARN_ON_ONCE(bus->state != MDIOBUS_REGISTERED)) + return; bus->state = MDIOBUS_UNREGISTERED; for (i = 0; i < PHY_MAX_ADDR; i++) { -- cgit v1.2.3 From 9cfaf83a961115f4d63a6fed029bf56aae6713cd Mon Sep 17 00:00:00 2001 From: Zheyu Ma Date: Thu, 20 May 2021 12:32:36 +0000 Subject: net/qla3xxx: fix schedule while atomic in ql_sem_spinlock [ Upstream commit 13a6f3153922391e90036ba2267d34eed63196fc ] When calling the 'ql_sem_spinlock', the driver has already acquired the spin lock, so the driver should not call 'ssleep' in atomic context. This bug can be fixed by using 'mdelay' instead of 'ssleep'. The KASAN's log reveals it: [ 3.238124 ] BUG: scheduling while atomic: swapper/0/1/0x00000002 [ 3.238748 ] 2 locks held by swapper/0/1: [ 3.239151 ] #0: ffff88810177b240 (&dev->mutex){....}-{3:3}, at: __device_driver_lock+0x41/0x60 [ 3.240026 ] #1: ffff888107c60e28 (&qdev->hw_lock){....}-{2:2}, at: ql3xxx_probe+0x2aa/0xea0 [ 3.240873 ] Modules linked in: [ 3.241187 ] irq event stamp: 460854 [ 3.241541 ] hardirqs last enabled at (460853): [] _raw_spin_unlock_irqrestore+0x4f/0x70 [ 3.242245 ] hardirqs last disabled at (460854): [] _raw_spin_lock_irqsave+0x2a/0x70 [ 3.242245 ] softirqs last enabled at (446076): [] __do_softirq+0x2e4/0x4b1 [ 3.242245 ] softirqs last disabled at (446069): [] irq_exit_rcu+0x100/0x110 [ 3.242245 ] Preemption disabled at: [ 3.242245 ] [] ql3xxx_probe+0x2aa/0xea0 [ 3.242245 ] Kernel panic - not syncing: scheduling while atomic [ 3.242245 ] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00145 -gee7dc339169-dirty #16 [ 3.242245 ] Call Trace: [ 3.242245 ] dump_stack+0xba/0xf5 [ 3.242245 ] ? ql3xxx_probe+0x1f0/0xea0 [ 3.242245 ] panic+0x15a/0x3f2 [ 3.242245 ] ? vprintk+0x76/0x150 [ 3.242245 ] ? ql3xxx_probe+0x2aa/0xea0 [ 3.242245 ] __schedule_bug+0xae/0xe0 [ 3.242245 ] __schedule+0x72e/0xa00 [ 3.242245 ] schedule+0x43/0xf0 [ 3.242245 ] schedule_timeout+0x28b/0x500 [ 3.242245 ] ? del_timer_sync+0xf0/0xf0 [ 3.242245 ] ? msleep+0x2f/0x70 [ 3.242245 ] msleep+0x59/0x70 [ 3.242245 ] ql3xxx_probe+0x307/0xea0 [ 3.242245 ] ? _raw_spin_unlock_irqrestore+0x3a/0x70 [ 3.242245 ] ? pci_device_remove+0x110/0x110 [ 3.242245 ] local_pci_probe+0x45/0xa0 [ 3.242245 ] pci_device_probe+0x12b/0x1d0 [ 3.242245 ] really_probe+0x2a9/0x610 [ 3.242245 ] driver_probe_device+0x90/0x1d0 [ 3.242245 ] ? mutex_lock_nested+0x1b/0x20 [ 3.242245 ] device_driver_attach+0x68/0x70 [ 3.242245 ] __driver_attach+0x124/0x1b0 [ 3.242245 ] ? device_driver_attach+0x70/0x70 [ 3.242245 ] bus_for_each_dev+0xbb/0x110 [ 3.242245 ] ? rdinit_setup+0x45/0x45 [ 3.242245 ] driver_attach+0x27/0x30 [ 3.242245 ] bus_add_driver+0x1eb/0x2a0 [ 3.242245 ] driver_register+0xa9/0x180 [ 3.242245 ] __pci_register_driver+0x82/0x90 [ 3.242245 ] ? yellowfin_init+0x25/0x25 [ 3.242245 ] ql3xxx_driver_init+0x23/0x25 [ 3.242245 ] do_one_initcall+0x7f/0x3d0 [ 3.242245 ] ? rdinit_setup+0x45/0x45 [ 3.242245 ] ? rcu_read_lock_sched_held+0x4f/0x80 [ 3.242245 ] kernel_init_freeable+0x2aa/0x301 [ 3.242245 ] ? rest_init+0x2c0/0x2c0 [ 3.242245 ] kernel_init+0x18/0x190 [ 3.242245 ] ? rest_init+0x2c0/0x2c0 [ 3.242245 ] ? rest_init+0x2c0/0x2c0 [ 3.242245 ] ret_from_fork+0x1f/0x30 [ 3.242245 ] Dumping ftrace buffer: [ 3.242245 ] (ftrace buffer empty) [ 3.242245 ] Kernel Offset: disabled [ 3.242245 ] Rebooting in 1 seconds. Reported-by: Zheyu Ma Signed-off-by: Zheyu Ma Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/qlogic/qla3xxx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qla3xxx.c b/drivers/net/ethernet/qlogic/qla3xxx.c index f2cb77c3b199..192950a112c9 100644 --- a/drivers/net/ethernet/qlogic/qla3xxx.c +++ b/drivers/net/ethernet/qlogic/qla3xxx.c @@ -115,7 +115,7 @@ static int ql_sem_spinlock(struct ql3_adapter *qdev, value = readl(&port_regs->CommonRegs.semaphoreReg); if ((value & (sem_mask >> 16)) == sem_bits) return 0; - ssleep(1); + mdelay(1000); } while (--seconds); return -1; } -- cgit v1.2.3 From a1054659ebbbf6856dff7c89b1788c63e88480ec Mon Sep 17 00:00:00 2001 From: Matt Wang Date: Wed, 19 May 2021 09:49:32 +0000 Subject: scsi: vmw_pvscsi: Set correct residual data length [ Upstream commit e662502b3a782d479e67736a5a1c169a703d853a ] Some commands (such as INQUIRY) may return less data than the initiator requested. To avoid conducting useless information, set the right residual count to make upper layer aware of this. Before (INQUIRY PAGE 0xB0 with 128B buffer): $ sg_raw -r 128 /dev/sda 12 01 B0 00 80 00 SCSI Status: Good Received 128 bytes of data: 00 00 b0 00 3c 01 00 00 00 00 00 00 00 00 00 00 00 ...<............ 10 00 00 00 00 00 01 00 00 00 00 00 40 00 00 08 00 ...........@.... 20 80 00 00 00 00 00 00 00 00 00 20 00 00 00 00 00 .......... ..... 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ After: $ sg_raw -r 128 /dev/sda 12 01 B0 00 80 00 SCSI Status: Good Received 64 bytes of data: 00 00 b0 00 3c 01 00 00 00 00 00 00 00 00 00 00 00 ...<............ 10 00 00 00 00 00 01 00 00 00 00 00 40 00 00 08 00 ...........@.... 20 80 00 00 00 00 00 00 00 00 00 20 00 00 00 00 00 .......... ..... 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [mkp: clarified description] Link: https://lore.kernel.org/r/03C41093-B62E-43A2-913E-CFC92F1C70C3@vmware.com Signed-off-by: Matt Wang Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin --- drivers/scsi/vmw_pvscsi.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/vmw_pvscsi.c b/drivers/scsi/vmw_pvscsi.c index 3f2a5d6c437b..d25cf084afe7 100644 --- a/drivers/scsi/vmw_pvscsi.c +++ b/drivers/scsi/vmw_pvscsi.c @@ -558,7 +558,13 @@ static void pvscsi_complete_request(struct pvscsi_adapter *adapter, case BTSTAT_SUCCESS: case BTSTAT_LINKED_COMMAND_COMPLETED: case BTSTAT_LINKED_COMMAND_COMPLETED_WITH_FLAG: - /* If everything went fine, let's move on.. */ + /* + * Commands like INQUIRY may transfer less data than + * requested by the initiator via bufflen. Set residual + * count to make upper layer aware of the actual amount + * of data returned. + */ + scsi_set_resid(cmd, scsi_bufflen(cmd) - e->dataLen); cmd->result = (DID_OK << 16); break; -- cgit v1.2.3 From 94d22d54e7858adf59476a06e74ed449695f081d Mon Sep 17 00:00:00 2001 From: Dmitry Bogdanov Date: Thu, 15 Apr 2021 23:35:54 +0300 Subject: scsi: target: qla2xxx: Wait for stop_phase1 at WWN removal [ Upstream commit 2ef7665dfd88830f15415ba007c7c9a46be7acd8 ] Target de-configuration panics at high CPU load because TPGT and WWPN can be removed on separate threads. TPGT removal requests a reset HBA on a separate thread and waits for reset complete (phase1). Due to high CPU load that HBA reset can be delayed for some time. WWPN removal does qlt_stop_phase2(). There it is believed that phase1 has already completed and thus tgt.tgt_ops is subsequently cleared. However, tgt.tgt_ops is needed to process incoming traffic and therefore this will cause one of the following panics: NIP qlt_reset+0x7c/0x220 [qla2xxx] LR qlt_reset+0x68/0x220 [qla2xxx] Call Trace: 0xc000003ffff63a78 (unreliable) qlt_handle_imm_notify+0x800/0x10c0 [qla2xxx] qlt_24xx_atio_pkt+0x208/0x590 [qla2xxx] qlt_24xx_process_atio_queue+0x33c/0x7a0 [qla2xxx] qla83xx_msix_atio_q+0x54/0x90 [qla2xxx] or NIP qlt_24xx_handle_abts+0xd0/0x2a0 [qla2xxx] LR qlt_24xx_handle_abts+0xb4/0x2a0 [qla2xxx] Call Trace: qlt_24xx_handle_abts+0x90/0x2a0 [qla2xxx] (unreliable) qlt_24xx_process_atio_queue+0x500/0x7a0 [qla2xxx] qla83xx_msix_atio_q+0x54/0x90 [qla2xxx] or NIP qlt_create_sess+0x90/0x4e0 [qla2xxx] LR qla24xx_do_nack_work+0xa8/0x180 [qla2xxx] Call Trace: 0xc0000000348fba30 (unreliable) qla24xx_do_nack_work+0xa8/0x180 [qla2xxx] qla2x00_do_work+0x674/0xbf0 [qla2xxx] qla2x00_iocb_work_fn The patch fixes the issue by serializing qlt_stop_phase1() and qlt_stop_phase2() functions to make WWPN removal wait for phase1 completion. Link: https://lore.kernel.org/r/20210415203554.27890-1-d.bogdanov@yadro.com Reviewed-by: Roman Bolshakov Signed-off-by: Dmitry Bogdanov Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin --- drivers/scsi/qla2xxx/qla_target.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index 1d9f19e5e0f8..0a8a5841e1b8 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -1042,6 +1042,7 @@ void qlt_stop_phase2(struct qla_tgt *tgt) "Waiting for %d IRQ commands to complete (tgt %p)", tgt->irq_cmd_count, tgt); + mutex_lock(&tgt->ha->optrom_mutex); mutex_lock(&vha->vha_tgt.tgt_mutex); spin_lock_irqsave(&ha->hardware_lock, flags); while (tgt->irq_cmd_count != 0) { @@ -1053,6 +1054,7 @@ void qlt_stop_phase2(struct qla_tgt *tgt) tgt->tgt_stopped = 1; spin_unlock_irqrestore(&ha->hardware_lock, flags); mutex_unlock(&vha->vha_tgt.tgt_mutex); + mutex_unlock(&tgt->ha->optrom_mutex); ql_dbg(ql_dbg_tgt_mgt, vha, 0xf00c, "Stop of tgt %p finished", tgt); -- cgit v1.2.3 From 13b036fe4eaa8ea169803fb4794aa9b2031a19dc Mon Sep 17 00:00:00 2001 From: Zong Li Date: Sat, 22 May 2021 17:16:11 +0800 Subject: net: macb: ensure the device is available before accessing GEMGXL control registers [ Upstream commit 5eff1461a6dec84f04fafa9128548bad51d96147 ] If runtime power menagement is enabled, the gigabit ethernet PLL would be disabled after macb_probe(). During this period of time, the system would hang up if we try to access GEMGXL control registers. We can't put runtime_pm_get/runtime_pm_put/ there due to the issue of sleep inside atomic section (7fa2955ff70ce453 ("sh_eth: Fix sleeping function called from invalid context"). Add netif_running checking to ensure the device is available before accessing GEMGXL device. Changed in v2: - Use netif_running instead of its own flag Signed-off-by: Zong Li Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/cadence/macb.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index 78803e7de360..d1cdb8540e12 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -1955,6 +1955,9 @@ static struct net_device_stats *gem_get_stats(struct macb *bp) struct gem_stats *hwstat = &bp->hw_stats.gem; struct net_device_stats *nstat = &bp->stats; + if (!netif_running(bp->dev)) + return nstat; + gem_update_stats(bp); nstat->rx_errors = (hwstat->rx_frame_check_sequence_errors + -- cgit v1.2.3 From ff4aab297538058ad25783edc8e9ac2e49231d25 Mon Sep 17 00:00:00 2001 From: Saubhik Mukherjee Date: Mon, 24 May 2021 19:07:12 +0530 Subject: net: appletalk: cops: Fix data race in cops_probe1 [ Upstream commit a4dd4fc6105e54393d637450a11d4cddb5fabc4f ] In cops_probe1(), there is a write to dev->base_addr after requesting an interrupt line and registering the interrupt handler cops_interrupt(). The handler might be called in parallel to handle an interrupt. cops_interrupt() tries to read dev->base_addr leading to a potential data race. So write to dev->base_addr before calling request_irq(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Saubhik Mukherjee Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/appletalk/cops.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c index 7f2a032c354c..841a5de58c7c 100644 --- a/drivers/net/appletalk/cops.c +++ b/drivers/net/appletalk/cops.c @@ -324,6 +324,8 @@ static int __init cops_probe1(struct net_device *dev, int ioaddr) break; } + dev->base_addr = ioaddr; + /* Reserve any actual interrupt. */ if (dev->irq) { retval = request_irq(dev->irq, cops_interrupt, 0, dev->name, dev); @@ -331,8 +333,6 @@ static int __init cops_probe1(struct net_device *dev, int ioaddr) goto err_out; } - dev->base_addr = ioaddr; - lp = netdev_priv(dev); spin_lock_init(&lp->lock); -- cgit v1.2.3 From d069f110fb74b1dc206e524fc6b187b3dd5486d1 Mon Sep 17 00:00:00 2001 From: Tiezhu Yang Date: Sat, 15 May 2021 19:02:01 +0800 Subject: MIPS: Fix kernel hang under FUNCTION_GRAPH_TRACER and PREEMPT_TRACER [ Upstream commit 78cf0eb926cb1abeff2106bae67752e032fe5f3e ] When update the latest mainline kernel with the following three configs, the kernel hangs during startup: (1) CONFIG_FUNCTION_GRAPH_TRACER=y (2) CONFIG_PREEMPT_TRACER=y (3) CONFIG_FTRACE_STARTUP_TEST=y When update the latest mainline kernel with the above two configs (1) and (2), the kernel starts normally, but it still hangs when execute the following command: echo "function_graph" > /sys/kernel/debug/tracing/current_tracer Without CONFIG_PREEMPT_TRACER=y, the above two kinds of kernel hangs disappeared, so it seems that CONFIG_PREEMPT_TRACER has some influences with function_graph tracer at the first glance. I use ejtag to find out the epc address is related with preempt_enable() in the file arch/mips/lib/mips-atomic.c, because function tracing can trace the preempt_{enable,disable} calls that are traced, replace them with preempt_{enable,disable}_notrace to prevent function tracing from going into an infinite loop, and then it can fix the kernel hang issue. By the way, it seems that this commit is a complement and improvement of commit f93a1a00f2bd ("MIPS: Fix crash that occurs when function tracing is enabled"). Signed-off-by: Tiezhu Yang Cc: Steven Rostedt Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin --- arch/mips/lib/mips-atomic.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/mips/lib/mips-atomic.c b/arch/mips/lib/mips-atomic.c index 272af8ac2425..fd50aa7b178a 100644 --- a/arch/mips/lib/mips-atomic.c +++ b/arch/mips/lib/mips-atomic.c @@ -37,7 +37,7 @@ */ notrace void arch_local_irq_disable(void) { - preempt_disable(); + preempt_disable_notrace(); __asm__ __volatile__( " .set push \n" @@ -53,7 +53,7 @@ notrace void arch_local_irq_disable(void) : /* no inputs */ : "memory"); - preempt_enable(); + preempt_enable_notrace(); } EXPORT_SYMBOL(arch_local_irq_disable); @@ -62,7 +62,7 @@ notrace unsigned long arch_local_irq_save(void) { unsigned long flags; - preempt_disable(); + preempt_disable_notrace(); __asm__ __volatile__( " .set push \n" @@ -79,7 +79,7 @@ notrace unsigned long arch_local_irq_save(void) : /* no inputs */ : "memory"); - preempt_enable(); + preempt_enable_notrace(); return flags; } @@ -89,7 +89,7 @@ notrace void arch_local_irq_restore(unsigned long flags) { unsigned long __tmp1; - preempt_disable(); + preempt_disable_notrace(); __asm__ __volatile__( " .set push \n" @@ -107,7 +107,7 @@ notrace void arch_local_irq_restore(unsigned long flags) : "0" (flags) : "memory"); - preempt_enable(); + preempt_enable_notrace(); } EXPORT_SYMBOL(arch_local_irq_restore); -- cgit v1.2.3 From c83f46610857ee9e4ade19e381420eee5199be3b Mon Sep 17 00:00:00 2001 From: Jiapeng Chong Date: Tue, 25 May 2021 19:00:12 +0800 Subject: bnx2x: Fix missing error code in bnx2x_iov_init_one() [ Upstream commit 65161c35554f7135e6656b3df1ce2c500ca0bdcf ] Eliminate the follow smatch warning: drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1227 bnx2x_iov_init_one() warn: missing error code 'err'. Reported-by: Abaci Robot Signed-off-by: Jiapeng Chong Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index 55a7774e8ef5..92c965cb3633 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -1245,8 +1245,10 @@ int bnx2x_iov_init_one(struct bnx2x *bp, int int_mode_param, goto failed; /* SR-IOV capability was enabled but there are no VFs*/ - if (iov->total == 0) + if (iov->total == 0) { + err = -EINVAL; goto failed; + } iov->nr_virtfn = min_t(u16, iov->total, num_vfs_param); -- cgit v1.2.3 From 172df61a8a133976d0937afbd5413a81ff4336b4 Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Wed, 12 May 2021 09:20:50 +1200 Subject: powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers [ Upstream commit 7adc7b225cddcfd0f346d10144fd7a3d3d9f9ea7 ] The i2c controllers on the P2040/P2041 have an erratum where the documented scheme for i2c bus recovery will not work (A-004447). A different mechanism is needed which is documented in the P2040 Chip Errata Rev Q (latest available at the time of writing). Signed-off-by: Chris Packham Acked-by: Michael Ellerman Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin --- arch/powerpc/boot/dts/fsl/p2041si-post.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi index 51e975d7631a..8921f17fca42 100644 --- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi @@ -389,7 +389,23 @@ }; /include/ "qoriq-i2c-0.dtsi" + i2c@118000 { + fsl,i2c-erratum-a004447; + }; + + i2c@118100 { + fsl,i2c-erratum-a004447; + }; + /include/ "qoriq-i2c-1.dtsi" + i2c@119000 { + fsl,i2c-erratum-a004447; + }; + + i2c@119100 { + fsl,i2c-erratum-a004447; + }; + /include/ "qoriq-duart-0.dtsi" /include/ "qoriq-duart-1.dtsi" /include/ "qoriq-gpio-0.dtsi" -- cgit v1.2.3 From 841fd967746db13d7ef3cd7291b57b2dc7f86e04 Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Wed, 12 May 2021 09:20:51 +1200 Subject: powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers [ Upstream commit 19ae697a1e4edf1d755b413e3aa38da65e2db23b ] The i2c controllers on the P1010 have an erratum where the documented scheme for i2c bus recovery will not work (A-004447). A different mechanism is needed which is documented in the P1010 Chip Errata Rev L. Signed-off-by: Chris Packham Acked-by: Michael Ellerman Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin --- arch/powerpc/boot/dts/fsl/p1010si-post.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi index af12ead88c5f..404f570ebe23 100644 --- a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi @@ -122,7 +122,15 @@ }; /include/ "pq3-i2c-0.dtsi" + i2c@3000 { + fsl,i2c-erratum-a004447; + }; + /include/ "pq3-i2c-1.dtsi" + i2c@3100 { + fsl,i2c-erratum-a004447; + }; + /include/ "pq3-duart-0.dtsi" /include/ "pq3-espi-0.dtsi" spi0: spi@7000 { -- cgit v1.2.3 From b9e6f2571ab35d5d50b8e8a47466ea6e43ad2906 Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Mon, 29 Mar 2021 14:52:03 +1300 Subject: i2c: mpc: Make use of i2c_recover_bus() [ Upstream commit 65171b2df15eb7545431d75c2729b5062da89b43 ] Move the existing calls of mpc_i2c_fixup() to a recovery function registered via bus_recovery_info. This makes it more obvious that recovery is supported and allows for a future where recovery is triggered by the i2c core. Signed-off-by: Chris Packham Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin --- drivers/i2c/busses/i2c-mpc.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index 48ecffecc0ed..f2e8b9a159a7 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -581,7 +581,7 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) { writeb(status & ~CSR_MAL, i2c->base + MPC_I2C_SR); - mpc_i2c_fixup(i2c); + i2c_recover_bus(&i2c->adap); } return -EIO; } @@ -617,7 +617,7 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) { writeb(status & ~CSR_MAL, i2c->base + MPC_I2C_SR); - mpc_i2c_fixup(i2c); + i2c_recover_bus(&i2c->adap); } return -EIO; } @@ -632,6 +632,15 @@ static u32 mpc_functionality(struct i2c_adapter *adap) | I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL; } +static int fsl_i2c_bus_recovery(struct i2c_adapter *adap) +{ + struct mpc_i2c *i2c = i2c_get_adapdata(adap); + + mpc_i2c_fixup(i2c); + + return 0; +} + static const struct i2c_algorithm mpc_algo = { .master_xfer = mpc_xfer, .functionality = mpc_functionality, @@ -643,6 +652,10 @@ static struct i2c_adapter mpc_ops = { .timeout = HZ, }; +static struct i2c_bus_recovery_info fsl_i2c_recovery_info = { + .recover_bus = fsl_i2c_bus_recovery, +}; + static const struct of_device_id mpc_i2c_of_match[]; static int fsl_i2c_probe(struct platform_device *op) { @@ -735,6 +748,7 @@ static int fsl_i2c_probe(struct platform_device *op) i2c_set_adapdata(&i2c->adap, i2c); i2c->adap.dev.parent = &op->dev; i2c->adap.dev.of_node = of_node_get(op->dev.of_node); + i2c->adap.bus_recovery_info = &fsl_i2c_recovery_info; result = i2c_add_adapter(&i2c->adap); if (result < 0) { -- cgit v1.2.3 From 1f631a7f01aecf401ba72caeb06ae73a1748eb44 Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Wed, 12 May 2021 09:20:52 +1200 Subject: i2c: mpc: implement erratum A-004447 workaround [ Upstream commit 8f0cdec8b5fd94135d643662506ee94ae9e98785 ] The P2040/P2041 has an erratum where the normal i2c recovery mechanism does not work. Implement the alternative recovery mechanism documented in the P2040 Chip Errata Rev Q. Signed-off-by: Chris Packham Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin --- drivers/i2c/busses/i2c-mpc.c | 79 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 78 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index f2e8b9a159a7..2e083a71c221 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -23,6 +23,7 @@ #include #include +#include #include #include #include @@ -49,6 +50,7 @@ #define CCR_MTX 0x10 #define CCR_TXAK 0x08 #define CCR_RSTA 0x04 +#define CCR_RSVD 0x02 #define CSR_MCF 0x80 #define CSR_MAAS 0x40 @@ -70,6 +72,7 @@ struct mpc_i2c { u8 fdr, dfsrr; #endif struct clk *clk_per; + bool has_errata_A004447; }; struct mpc_i2c_divider { @@ -178,6 +181,75 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing) return 0; } +static int i2c_mpc_wait_sr(struct mpc_i2c *i2c, int mask) +{ + void __iomem *addr = i2c->base + MPC_I2C_SR; + u8 val; + + return readb_poll_timeout(addr, val, val & mask, 0, 100); +} + +/* + * Workaround for Erratum A004447. From the P2040CE Rev Q + * + * 1. Set up the frequency divider and sampling rate. + * 2. I2CCR - a0h + * 3. Poll for I2CSR[MBB] to get set. + * 4. If I2CSR[MAL] is set (an indication that SDA is stuck low), then go to + * step 5. If MAL is not set, then go to step 13. + * 5. I2CCR - 00h + * 6. I2CCR - 22h + * 7. I2CCR - a2h + * 8. Poll for I2CSR[MBB] to get set. + * 9. Issue read to I2CDR. + * 10. Poll for I2CSR[MIF] to be set. + * 11. I2CCR - 82h + * 12. Workaround complete. Skip the next steps. + * 13. Issue read to I2CDR. + * 14. Poll for I2CSR[MIF] to be set. + * 15. I2CCR - 80h + */ +static void mpc_i2c_fixup_A004447(struct mpc_i2c *i2c) +{ + int ret; + u32 val; + + writeccr(i2c, CCR_MEN | CCR_MSTA); + ret = i2c_mpc_wait_sr(i2c, CSR_MBB); + if (ret) { + dev_err(i2c->dev, "timeout waiting for CSR_MBB\n"); + return; + } + + val = readb(i2c->base + MPC_I2C_SR); + + if (val & CSR_MAL) { + writeccr(i2c, 0x00); + writeccr(i2c, CCR_MSTA | CCR_RSVD); + writeccr(i2c, CCR_MEN | CCR_MSTA | CCR_RSVD); + ret = i2c_mpc_wait_sr(i2c, CSR_MBB); + if (ret) { + dev_err(i2c->dev, "timeout waiting for CSR_MBB\n"); + return; + } + val = readb(i2c->base + MPC_I2C_DR); + ret = i2c_mpc_wait_sr(i2c, CSR_MIF); + if (ret) { + dev_err(i2c->dev, "timeout waiting for CSR_MIF\n"); + return; + } + writeccr(i2c, CCR_MEN | CCR_RSVD); + } else { + val = readb(i2c->base + MPC_I2C_DR); + ret = i2c_mpc_wait_sr(i2c, CSR_MIF); + if (ret) { + dev_err(i2c->dev, "timeout waiting for CSR_MIF\n"); + return; + } + writeccr(i2c, CCR_MEN); + } +} + #if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_PPC_MPC512x) static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = { {20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23}, @@ -636,7 +708,10 @@ static int fsl_i2c_bus_recovery(struct i2c_adapter *adap) { struct mpc_i2c *i2c = i2c_get_adapdata(adap); - mpc_i2c_fixup(i2c); + if (i2c->has_errata_A004447) + mpc_i2c_fixup_A004447(i2c); + else + mpc_i2c_fixup(i2c); return 0; } @@ -740,6 +815,8 @@ static int fsl_i2c_probe(struct platform_device *op) dev_info(i2c->dev, "timeout %u us\n", mpc_ops.timeout * 1000000 / HZ); platform_set_drvdata(op, i2c); + if (of_property_read_bool(op->dev.of_node, "fsl,i2c-erratum-a004447")) + i2c->has_errata_A004447 = true; i2c->adap = mpc_ops; of_address_to_resource(op->dev.of_node, 0, &res); -- cgit v1.2.3 From 3098b86390a6b9ea52657689f08410baf130ceff Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Tue, 8 Jun 2021 15:31:42 -0400 Subject: kvm: avoid speculation-based attacks from out-of-range memslot accesses commit da27a83fd6cc7780fea190e1f5c19e87019da65c upstream. KVM's mechanism for accessing guest memory translates a guest physical address (gpa) to a host virtual address using the right-shifted gpa (also known as gfn) and a struct kvm_memory_slot. The translation is performed in __gfn_to_hva_memslot using the following formula: hva = slot->userspace_addr + (gfn - slot->base_gfn) * PAGE_SIZE It is expected that gfn falls within the boundaries of the guest's physical memory. However, a guest can access invalid physical addresses in such a way that the gfn is invalid. __gfn_to_hva_memslot is called from kvm_vcpu_gfn_to_hva_prot, which first retrieves a memslot through __gfn_to_memslot. While __gfn_to_memslot does check that the gfn falls within the boundaries of the guest's physical memory or not, a CPU can speculate the result of the check and continue execution speculatively using an illegal gfn. The speculation can result in calculating an out-of-bounds hva. If the resulting host virtual address is used to load another guest physical address, this is effectively a Spectre gadget consisting of two consecutive reads, the second of which is data dependent on the first. Right now it's not clear if there are any cases in which this is exploitable. One interesting case was reported by the original author of this patch, and involves visiting guest page tables on x86. Right now these are not vulnerable because the hva read goes through get_user(), which contains an LFENCE speculation barrier. However, there are patches in progress for x86 uaccess.h to mask kernel addresses instead of using LFENCE; once these land, a guest could use speculation to read from the VMM's ring 3 address space. Other architectures such as ARM already use the address masking method, and would be susceptible to this same kind of data-dependent access gadgets. Therefore, this patch proactively protects from these attacks by masking out-of-bounds gfns in __gfn_to_hva_memslot, which blocks speculation of invalid hvas. Sean Christopherson noted that this patch does not cover kvm_read_guest_offset_cached. This however is limited to a few bytes past the end of the cache, and therefore it is unlikely to be useful in the context of building a chain of data dependent accesses. Reported-by: Artemiy Margaritov Co-developed-by: Artemiy Margaritov Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman --- include/linux/kvm_host.h | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 19291f86d16c..c5ae2caab6f5 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -952,7 +953,15 @@ __gfn_to_memslot(struct kvm_memslots *slots, gfn_t gfn) static inline unsigned long __gfn_to_hva_memslot(struct kvm_memory_slot *slot, gfn_t gfn) { - return slot->userspace_addr + (gfn - slot->base_gfn) * PAGE_SIZE; + /* + * The index was checked originally in search_memslots. To avoid + * that a malicious guest builds a Spectre gadget out of e.g. page + * table walks, do not let the processor speculate loads outside + * the guest's registered memslots. + */ + unsigned long offset = array_index_nospec(gfn - slot->base_gfn, + slot->npages); + return slot->userspace_addr + offset * PAGE_SIZE; } static inline int memslot_id(struct kvm *kvm, gfn_t gfn) -- cgit v1.2.3 From 39b6d3368d30048123d963543b64452c0ac63afb Mon Sep 17 00:00:00 2001 From: Ritesh Harjani Date: Sun, 30 May 2021 20:24:05 +0530 Subject: btrfs: return value from btrfs_mark_extent_written() in case of error commit e7b2ec3d3d4ebeb4cff7ae45cf430182fa6a49fb upstream. We always return 0 even in case of an error in btrfs_mark_extent_written(). Fix it to return proper error value in case of a failure. All callers handle it. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Ritesh Harjani Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman --- fs/btrfs/file.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 73b547f88bfc..2426dc56426f 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -1089,7 +1089,7 @@ int btrfs_mark_extent_written(struct btrfs_trans_handle *trans, int del_nr = 0; int del_slot = 0; int recow; - int ret; + int ret = 0; u64 ino = btrfs_ino(inode); path = btrfs_alloc_path(); @@ -1284,7 +1284,7 @@ again: } out: btrfs_free_path(path); - return 0; + return ret; } /* -- cgit v1.2.3 From 5eda8a8c3c268f99e3fb9b19b0fb66e68b8c9f88 Mon Sep 17 00:00:00 2001 From: Alexander Kuznetsov Date: Wed, 9 Jun 2021 10:17:19 +0300 Subject: cgroup1: don't allow '\n' in renaming commit b7e24eb1caa5f8da20d405d262dba67943aedc42 upstream. cgroup_mkdir() have restriction on newline usage in names: $ mkdir $'/sys/fs/cgroup/cpu/test\ntest2' mkdir: cannot create directory '/sys/fs/cgroup/cpu/test\ntest2': Invalid argument But in cgroup1_rename() such check is missed. This allows us to make /proc//cgroup unparsable: $ mkdir /sys/fs/cgroup/cpu/test $ mv /sys/fs/cgroup/cpu/test $'/sys/fs/cgroup/cpu/test\ntest2' $ echo $$ > $'/sys/fs/cgroup/cpu/test\ntest2' $ cat /proc/self/cgroup 11:pids:/ 10:freezer:/ 9:hugetlb:/ 8:cpuset:/ 7:blkio:/user.slice 6:memory:/user.slice 5:net_cls,net_prio:/ 4:perf_event:/ 3:devices:/user.slice 2:cpu,cpuacct:/test test2 1:name=systemd:/ 0::/ Signed-off-by: Alexander Kuznetsov Reported-by: Andrey Krasichkov Acked-by: Dmitry Yakunin Cc: stable@vger.kernel.org Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman --- kernel/cgroup.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 7a7c535f8a2f..1f5e7dcbfd40 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -3310,6 +3310,10 @@ static int cgroup_rename(struct kernfs_node *kn, struct kernfs_node *new_parent, struct cgroup *cgrp = kn->priv; int ret; + /* do not accept '\n' to prevent making /proc//cgroup unparsable */ + if (strchr(new_name_str, '\n')) + return -EINVAL; + if (kernfs_type(kn) != KERNFS_DIR) return -ENOTDIR; if (kn->parent != new_parent) -- cgit v1.2.3 From be4c15bc9f393348def2ea8383513c022bbe49af Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Maciej=20=C5=BBenczykowski?= Date: Mon, 7 Jun 2021 17:53:44 -0700 Subject: USB: f_ncm: ncm_bitrate (speed) is unsigned MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 3370139745853f7826895293e8ac3aec1430508e upstream. [ 190.544755] configfs-gadget gadget: notify speed -44967296 This is because 4250000000 - 2**32 is -44967296. Fixes: 9f6ce4240a2b ("usb: gadget: f_ncm.c added") Cc: Brooke Basile Cc: Bryan O'Donoghue Cc: Felipe Balbi Cc: Lorenzo Colitti Cc: Yauheni Kaliuta Cc: Linux USB Mailing List Acked-By: Lorenzo Colitti Signed-off-by: Maciej Żenczykowski Cc: stable Link: https://lore.kernel.org/r/20210608005344.3762668-1-zenczykowski@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/function/f_ncm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c index 16908737bff1..93086efef5a8 100644 --- a/drivers/usb/gadget/function/f_ncm.c +++ b/drivers/usb/gadget/function/f_ncm.c @@ -514,7 +514,7 @@ static void ncm_do_notify(struct f_ncm *ncm) data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget)); data[1] = data[0]; - DBG(cdev, "notify speed %d\n", ncm_bitrate(cdev->gadget)); + DBG(cdev, "notify speed %u\n", ncm_bitrate(cdev->gadget)); ncm->notify_state = NCM_NOTIFY_CONNECT; break; } -- cgit v1.2.3 From 96b74a99d360235c24052f1d060e64ac53f43528 Mon Sep 17 00:00:00 2001 From: Marian-Cristian Rotariu Date: Tue, 8 Jun 2021 19:26:50 +0300 Subject: usb: dwc3: ep0: fix NULL pointer exception commit d00889080ab60051627dab1d85831cd9db750e2a upstream. There is no validation of the index from dwc3_wIndex_to_dep() and we might be referring a non-existing ep and trigger a NULL pointer exception. In certain configurations we might use fewer eps and the index might wrongly indicate a larger ep index than existing. By adding this validation from the patch we can actually report a wrong index back to the caller. In our usecase we are using a composite device on an older kernel, but upstream might use this fix also. Unfortunately, I cannot describe the hardware for others to reproduce the issue as it is a proprietary implementation. [ 82.958261] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a4 [ 82.966891] Mem abort info: [ 82.969663] ESR = 0x96000006 [ 82.972703] Exception class = DABT (current EL), IL = 32 bits [ 82.978603] SET = 0, FnV = 0 [ 82.981642] EA = 0, S1PTW = 0 [ 82.984765] Data abort info: [ 82.987631] ISV = 0, ISS = 0x00000006 [ 82.991449] CM = 0, WnR = 0 [ 82.994409] user pgtable: 4k pages, 39-bit VAs, pgdp = 00000000c6210ccc [ 83.000999] [00000000000000a4] pgd=0000000053aa5003, pud=0000000053aa5003, pmd=0000000000000000 [ 83.009685] Internal error: Oops: 96000006 [#1] PREEMPT SMP [ 83.026433] Process irq/62-dwc3 (pid: 303, stack limit = 0x000000003985154c) [ 83.033470] CPU: 0 PID: 303 Comm: irq/62-dwc3 Not tainted 4.19.124 #1 [ 83.044836] pstate: 60000085 (nZCv daIf -PAN -UAO) [ 83.049628] pc : dwc3_ep0_handle_feature+0x414/0x43c [ 83.054558] lr : dwc3_ep0_interrupt+0x3b4/0xc94 ... [ 83.141788] Call trace: [ 83.144227] dwc3_ep0_handle_feature+0x414/0x43c [ 83.148823] dwc3_ep0_interrupt+0x3b4/0xc94 [ 83.181546] ---[ end trace aac6b5267d84c32f ]--- Signed-off-by: Marian-Cristian Rotariu Cc: stable Link: https://lore.kernel.org/r/20210608162650.58426-1-marian.c.rotariu@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/ep0.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index f13e9e9fb834..ca631fea59e0 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -331,6 +331,9 @@ static struct dwc3_ep *dwc3_wIndex_to_dep(struct dwc3 *dwc, __le16 wIndex_le) epnum |= 1; dep = dwc->eps[epnum]; + if (dep == NULL) + return NULL; + if (dep->flags & DWC3_EP_ENABLED) return dep; -- cgit v1.2.3 From a6cff02901852a1ee8975bbd8fb29e51f2d8628f Mon Sep 17 00:00:00 2001 From: George McCollister Date: Thu, 3 Jun 2021 19:32:08 -0500 Subject: USB: serial: ftdi_sio: add NovaTech OrionMX product ID commit bc96c72df33ee81b24d87eab953c73f7bcc04f29 upstream. Add PID for the NovaTech OrionMX so it can be automatically detected. Signed-off-by: George McCollister Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio_ids.h | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 3d02399ad49e..f8b8bdc0dc6f 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -606,6 +606,7 @@ static const struct usb_device_id id_table_combined[] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FTDI_VID, FTDI_NT_ORIONLX_PLUS_PID) }, { USB_DEVICE(FTDI_VID, FTDI_NT_ORION_IO_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_NT_ORIONMX_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SYNAPSE_SS200_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX2_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index b5f28a795228..54ded2bc9eb6 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -580,6 +580,7 @@ #define FTDI_NT_ORIONLXM_PID 0x7c90 /* OrionLXm Substation Automation Platform */ #define FTDI_NT_ORIONLX_PLUS_PID 0x7c91 /* OrionLX+ Substation Automation Platform */ #define FTDI_NT_ORION_IO_PID 0x7c92 /* Orion I/O */ +#define FTDI_NT_ORIONMX_PID 0x7c93 /* OrionMX */ /* * Synapse Wireless product ids (FTDI_VID) -- cgit v1.2.3 From d307cd0830b08831c5224ea21988ae038be33b36 Mon Sep 17 00:00:00 2001 From: Alexandre GRIVEAUX Date: Sun, 23 May 2021 18:35:21 +0200 Subject: USB: serial: omninet: add device id for Zyxel Omni 56K Plus commit fc0b3dc9a11771c3919eaaaf9d649138b095aa0f upstream. Add device id for Zyxel Omni 56K Plus modem, this modem include: USB chip: NetChip NET2888 Main chip: 901041A F721501APGF Another modem using the same chips is the Zyxel Omni 56K DUO/NEO, could be added with the right USB ID. Signed-off-by: Alexandre GRIVEAUX Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/omninet.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 76564b3bebb9..cc0bf59bd08d 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -27,6 +27,7 @@ #define ZYXEL_VENDOR_ID 0x0586 #define ZYXEL_OMNINET_ID 0x1000 +#define ZYXEL_OMNI_56K_PLUS_ID 0x1500 /* This one seems to be a re-branded ZyXEL device */ #define BT_IGNITIONPRO_ID 0x2000 @@ -44,6 +45,7 @@ static int omninet_port_remove(struct usb_serial_port *port); static const struct usb_device_id id_table[] = { { USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNINET_ID) }, + { USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNI_56K_PLUS_ID) }, { USB_DEVICE(ZYXEL_VENDOR_ID, BT_IGNITIONPRO_ID) }, { } /* Terminating entry */ }; -- cgit v1.2.3 From c6db1c0f08eaabf4cd490b9689cf5b02cca84b57 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 24 May 2021 11:17:05 +0200 Subject: USB: serial: quatech2: fix control-request directions commit eb8dbe80326c3d44c1e38ee4f40e0d8d3e06f2d0 upstream. The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Fix the three requests which erroneously used usb_rcvctrlpipe(). Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver") Cc: stable@vger.kernel.org # 3.5 Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/quatech2.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c index 82f28192694f..e548a6094d22 100644 --- a/drivers/usb/serial/quatech2.c +++ b/drivers/usb/serial/quatech2.c @@ -419,7 +419,7 @@ static void qt2_close(struct usb_serial_port *port) /* flush the port transmit buffer */ i = usb_control_msg(serial->dev, - usb_rcvctrlpipe(serial->dev, 0), + usb_sndctrlpipe(serial->dev, 0), QT2_FLUSH_DEVICE, 0x40, 1, port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT); @@ -429,7 +429,7 @@ static void qt2_close(struct usb_serial_port *port) /* flush the port receive buffer */ i = usb_control_msg(serial->dev, - usb_rcvctrlpipe(serial->dev, 0), + usb_sndctrlpipe(serial->dev, 0), QT2_FLUSH_DEVICE, 0x40, 0, port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT); @@ -701,7 +701,7 @@ static int qt2_attach(struct usb_serial *serial) int status; /* power on unit */ - status = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + status = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), 0xc2, 0x40, 0x8000, 0, NULL, 0, QT2_USB_TIMEOUT); if (status < 0) { -- cgit v1.2.3 From 4e0d9280b6b13556f9f39dba0854cc670151653f Mon Sep 17 00:00:00 2001 From: Linyu Yuan Date: Wed, 9 Jun 2021 07:35:47 +0800 Subject: usb: gadget: eem: fix wrong eem header operation commit 305f670846a31a261462577dd0b967c4fa796871 upstream. when skb_clone() or skb_copy_expand() fail, it should pull skb with lengh indicated by header, or not it will read network data and check it as header. Cc: Signed-off-by: Linyu Yuan Link: https://lore.kernel.org/r/20210608233547.3767-1-linyyuan@codeaurora.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/function/f_eem.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/function/f_eem.c b/drivers/usb/gadget/function/f_eem.c index cad35a502d3f..9411c5f953da 100644 --- a/drivers/usb/gadget/function/f_eem.c +++ b/drivers/usb/gadget/function/f_eem.c @@ -498,7 +498,7 @@ static int eem_unwrap(struct gether *port, skb2 = skb_clone(skb, GFP_ATOMIC); if (unlikely(!skb2)) { DBG(cdev, "unable to unframe EEM packet\n"); - continue; + goto next; } skb_trim(skb2, len - ETH_FCS_LEN); @@ -509,7 +509,7 @@ static int eem_unwrap(struct gether *port, if (unlikely(!skb3)) { DBG(cdev, "unable to realign EEM packet\n"); dev_kfree_skb_any(skb2); - continue; + goto next; } dev_kfree_skb_any(skb2); skb_queue_tail(list, skb3); -- cgit v1.2.3 From 668bd53c549e1d6de8873c9037de98f042240b1e Mon Sep 17 00:00:00 2001 From: Marco Elver Date: Thu, 27 May 2021 12:47:11 +0200 Subject: perf: Fix data race between pin_count increment/decrement commit 6c605f8371159432ec61cbb1488dcf7ad24ad19a upstream. KCSAN reports a data race between increment and decrement of pin_count: write to 0xffff888237c2d4e0 of 4 bytes by task 15740 on cpu 1: find_get_context kernel/events/core.c:4617 __do_sys_perf_event_open kernel/events/core.c:12097 [inline] __se_sys_perf_event_open kernel/events/core.c:11933 ... read to 0xffff888237c2d4e0 of 4 bytes by task 15743 on cpu 0: perf_unpin_context kernel/events/core.c:1525 [inline] __do_sys_perf_event_open kernel/events/core.c:12328 [inline] __se_sys_perf_event_open kernel/events/core.c:11933 ... Because neither read-modify-write here is atomic, this can lead to one of the operations being lost, resulting in an inconsistent pin_count. Fix it by adding the missing locking in the CPU-event case. Fixes: fe4b04fa31a6 ("perf: Cure task_oncpu_function_call() races") Reported-by: syzbot+142c9018f5962db69c7e@syzkaller.appspotmail.com Signed-off-by: Marco Elver Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20210527104711.2671610-1-elver@google.com Signed-off-by: Greg Kroah-Hartman --- kernel/events/core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/events/core.c b/kernel/events/core.c index d399748ea86b..ee75563b724f 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -3497,7 +3497,9 @@ find_get_context(struct pmu *pmu, struct task_struct *task, cpuctx = per_cpu_ptr(pmu->pmu_cpu_context, cpu); ctx = &cpuctx->ctx; get_ctx(ctx); + raw_spin_lock_irqsave(&ctx->lock, flags); ++ctx->pin_count; + raw_spin_unlock_irqrestore(&ctx->lock, flags); return ctx; } -- cgit v1.2.3 From fab8bfdfb4aac9e4e8363666333adfdf21e89106 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 3 Jun 2021 15:37:53 +0300 Subject: NFS: Fix a potential NULL dereference in nfs_get_client() [ Upstream commit 09226e8303beeec10f2ff844d2e46d1371dc58e0 ] None of the callers are expecting NULL returns from nfs_get_client() so this code will lead to an Oops. It's better to return an error pointer. I expect that this is dead code so hopefully no one is affected. Fixes: 31434f496abb ("nfs: check hostname in nfs_get_client") Signed-off-by: Dan Carpenter Signed-off-by: Trond Myklebust Signed-off-by: Sasha Levin --- fs/nfs/client.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/client.c b/fs/nfs/client.c index d6d5d2a48e83..ba2cd0bd3894 100644 --- a/fs/nfs/client.c +++ b/fs/nfs/client.c @@ -377,7 +377,7 @@ nfs_get_client(const struct nfs_client_initdata *cl_init, if (cl_init->hostname == NULL) { WARN_ON(1); - return NULL; + return ERR_PTR(-EINVAL); } dprintk("--> nfs_get_client(%s,v%u)\n", -- cgit v1.2.3 From 066f0c688cbf394dbb7fc743acee2cdeca1307fb Mon Sep 17 00:00:00 2001 From: Leo Yan Date: Sat, 5 Jun 2021 13:29:57 +0800 Subject: perf session: Correct buffer copying when peeking events [ Upstream commit 197eecb6ecae0b04bd694432f640ff75597fed9c ] When peeking an event, it has a short path and a long path. The short path uses the session pointer "one_mmap_addr" to directly fetch the event; and the long path needs to read out the event header and the following event data from file and fill into the buffer pointer passed through the argument "buf". The issue is in the long path that it copies the event header and event data into the same destination address which pointer "buf", this means the event header is overwritten. We are just lucky to run into the short path in most cases, so we don't hit the issue in the long path. This patch adds the offset "hdr_sz" to the pointer "buf" when copying the event data, so that it can reserve the event header which can be used properly by its caller. Fixes: 5a52f33adf02 ("perf session: Add perf_session__peek_event()") Signed-off-by: Leo Yan Acked-by: Adrian Hunter Acked-by: Jiri Olsa Cc: Alexander Shishkin Cc: Kan Liang Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lore.kernel.org/lkml/20210605052957.1070720-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin --- tools/perf/util/session.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c index 5b392662d100..1029225ee417 100644 --- a/tools/perf/util/session.c +++ b/tools/perf/util/session.c @@ -1255,6 +1255,7 @@ int perf_session__peek_event(struct perf_session *session, off_t file_offset, if (event->header.size < hdr_sz || event->header.size > buf_sz) return -1; + buf += hdr_sz; rest = event->header.size - hdr_sz; if (readn(fd, buf, rest) != (ssize_t)rest) -- cgit v1.2.3 From 8060cc42c79a1b182511c11e25b7c06966a81c92 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Wed, 9 Jun 2021 01:49:13 -0400 Subject: kvm: fix previous commit for 32-bit builds commit 4422829e8053068e0225e4d0ef42dc41ea7c9ef5 upstream. array_index_nospec does not work for uint64_t on 32-bit builds. However, the size of a memory slot must be less than 20 bits wide on those system, since the memory slot must fit in the user address space. So just store it in an unsigned long. Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman --- include/linux/kvm_host.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index c5ae2caab6f5..1e62865821d9 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -959,8 +959,8 @@ __gfn_to_hva_memslot(struct kvm_memory_slot *slot, gfn_t gfn) * table walks, do not let the processor speculate loads outside * the guest's registered memslots. */ - unsigned long offset = array_index_nospec(gfn - slot->base_gfn, - slot->npages); + unsigned long offset = gfn - slot->base_gfn; + offset = array_index_nospec(offset, slot->npages); return slot->userspace_addr + offset * PAGE_SIZE; } -- cgit v1.2.3 From 4ec682250dc20574792ba85f030fdbe6a0dd1af7 Mon Sep 17 00:00:00 2001 From: Dai Ngo Date: Wed, 19 May 2021 17:15:10 -0400 Subject: NFSv4: nfs4_proc_set_acl needs to restore NFS_CAP_UIDGID_NOMAP on error. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit f8849e206ef52b584cd9227255f4724f0cc900bb upstream. Currently if __nfs4_proc_set_acl fails with NFS4ERR_BADOWNER it re-enables the idmapper by clearing NFS_CAP_UIDGID_NOMAP before retrying again. The NFS_CAP_UIDGID_NOMAP remains cleared even if the retry fails. This causes problem for subsequent setattr requests for v4 server that does not have idmapping configured. This patch modifies nfs4_proc_set_acl to detect NFS4ERR_BADOWNER and NFS4ERR_BADNAME and skips the retry, since the kernel isn't involved in encoding the ACEs, and return -EINVAL. Steps to reproduce the problem: # mount -o vers=4.1,sec=sys server:/export/test /tmp/mnt # touch /tmp/mnt/file1 # chown 99 /tmp/mnt/file1 # nfs4_setfacl -a A::unknown.user@xyz.com:wrtncy /tmp/mnt/file1 Failed setxattr operation: Invalid argument # chown 99 /tmp/mnt/file1 chown: changing ownership of ‘/tmp/mnt/file1’: Invalid argument # umount /tmp/mnt # mount -o vers=4.1,sec=sys server:/export/test /tmp/mnt # chown 99 /tmp/mnt/file1 # v2: detect NFS4ERR_BADOWNER and NFS4ERR_BADNAME and skip retry in nfs4_proc_set_acl. Signed-off-by: Dai Ngo Signed-off-by: Trond Myklebust Signed-off-by: Greg Kroah-Hartman --- fs/nfs/nfs4proc.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 92ca753723b5..e10bada12361 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -4887,6 +4887,14 @@ static int nfs4_proc_set_acl(struct inode *inode, const void *buf, size_t buflen do { err = __nfs4_proc_set_acl(inode, buf, buflen); trace_nfs4_set_acl(inode, err); + if (err == -NFS4ERR_BADOWNER || err == -NFS4ERR_BADNAME) { + /* + * no need to retry since the kernel + * isn't involved in encoding the ACEs. + */ + err = -EINVAL; + break; + } err = nfs4_handle_exception(NFS_SERVER(inode), err, &exception); } while (exception.retry); -- cgit v1.2.3 From f949bb6e67a363682a85f82797e70838d798086d Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Wed, 2 Jun 2021 21:30:29 +0800 Subject: scsi: core: Only put parent device if host state differs from SHOST_CREATED commit 1e0d4e6225996f05271de1ebcb1a7c9381af0b27 upstream. get_device(shost->shost_gendev.parent) is called after host state has switched to SHOST_RUNNING. scsi_host_dev_release() shouldn't release the parent device if host state is still SHOST_CREATED. Link: https://lore.kernel.org/r/20210602133029.2864069-5-ming.lei@redhat.com Cc: Bart Van Assche Cc: John Garry Cc: Hannes Reinecke Tested-by: John Garry Reviewed-by: John Garry Signed-off-by: Ming Lei Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman --- drivers/scsi/hosts.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index 82ac1cd818ac..fb4b6034f644 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -355,7 +355,7 @@ static void scsi_host_dev_release(struct device *dev) kfree(shost->shost_data); - if (parent) + if (shost->shost_state != SHOST_CREATED) put_device(parent); kfree(shost); } -- cgit v1.2.3 From 0bc62e398bbd9e600959e610def5109957437b28 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (VMware)" Date: Mon, 7 Jun 2021 21:39:08 -0400 Subject: ftrace: Do not blindly read the ip address in ftrace_bug() commit 6c14133d2d3f768e0a35128faac8aa6ed4815051 upstream. It was reported that a bug on arm64 caused a bad ip address to be used for updating into a nop in ftrace_init(), but the error path (rightfully) returned -EINVAL and not -EFAULT, as the bug caused more than one error to occur. But because -EINVAL was returned, the ftrace_bug() tried to report what was at the location of the ip address, and read it directly. This caused the machine to panic, as the ip was not pointing to a valid memory address. Instead, read the ip address with copy_from_kernel_nofault() to safely access the memory, and if it faults, report that the address faulted, otherwise report what was in that location. Link: https://lore.kernel.org/lkml/20210607032329.28671-1-mark-pk.tsai@mediatek.com/ Cc: stable@vger.kernel.org Fixes: 05736a427f7e1 ("ftrace: warn on failure to disable mcount callers") Reported-by: Mark-PK Tsai Tested-by: Mark-PK Tsai Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman --- kernel/trace/ftrace.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 93c2abe27871..e591da4449f0 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -1943,12 +1943,18 @@ static int ftrace_hash_ipmodify_update(struct ftrace_ops *ops, static void print_ip_ins(const char *fmt, unsigned char *p) { + char ins[MCOUNT_INSN_SIZE]; int i; + if (probe_kernel_read(ins, p, MCOUNT_INSN_SIZE)) { + printk(KERN_CONT "%s[FAULT] %px\n", fmt, p); + return; + } + printk(KERN_CONT "%s", fmt); for (i = 0; i < MCOUNT_INSN_SIZE; i++) - printk(KERN_CONT "%s%02x", i ? ":" : "", p[i]); + printk(KERN_CONT "%s%02x", i ? ":" : "", ins[i]); } static struct ftrace_ops * -- cgit v1.2.3 From 0646b0f9f31cce61823ef9fcdcee4a3b9c6117b8 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 15 Jun 2021 09:26:19 -0700 Subject: proc: only require mm_struct for writing commit 94f0b2d4a1d0c52035aef425da5e022bd2cb1c71 upstream. Commit 591a22c14d3f ("proc: Track /proc/$pid/attr/ opener mm_struct") we started using __mem_open() to track the mm_struct at open-time, so that we could then check it for writes. But that also ended up making the permission checks at open time much stricter - and not just for writes, but for reads too. And that in turn caused a regression for at least Fedora 29, where NIC interfaces fail to start when using NetworkManager. Since only the write side wanted the mm_struct test, ignore any failures by __mem_open() at open time, leaving reads unaffected. The write() time verification of the mm_struct pointer will then catch the failure case because a NULL pointer will not match a valid 'current->mm'. Link: https://lore.kernel.org/netdev/YMjTlp2FSJYvoyFa@unreal/ Fixes: 591a22c14d3f ("proc: Track /proc/$pid/attr/ opener mm_struct") Reported-and-tested-by: Leon Romanovsky Cc: Kees Cook Cc: Christian Brauner Cc: Andrea Righi Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman --- fs/proc/base.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/proc/base.c b/fs/proc/base.c index d2428d20d5a9..b1ff8eb61802 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -2386,7 +2386,9 @@ out: #ifdef CONFIG_SECURITY static int proc_pid_attr_open(struct inode *inode, struct file *file) { - return __mem_open(inode, file, PTRACE_MODE_READ_FSCREDS); + file->private_data = NULL; + __mem_open(inode, file, PTRACE_MODE_READ_FSCREDS); + return 0; } static ssize_t proc_pid_attr_read(struct file * file, char __user * buf, -- cgit v1.2.3 From 78fba0641f54c8dc3624eba7cbc1252be35fa18e Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 16 Jun 2021 11:34:54 +0200 Subject: Linux 4.4.273 Link: https://lore.kernel.org/r/20210614102641.582612289@linuxfoundation.org Tested-by: Pavel Machek (CIP) Tested-by: Jon Hunter Tested-by: Shuah Khan Tested-by: Jason Self Tested-by: Linux Kernel Functional Testing Tested-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 426b4c2bf0e7..78a317e69e7f 100644 --- a/Makefile +++ b/Makefile @@ -1,6 +1,6 @@ VERSION = 4 PATCHLEVEL = 4 -SUBLEVEL = 272 +SUBLEVEL = 273 EXTRAVERSION = NAME = Blurry Fish Butt -- cgit v1.2.3