| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit e1959faf085b004e6c3afaaaa743381f00e7c015 upstream.
Some USB 3.1 enumeration issues were reported after the hub driver removed
the minimum 100ms limit for the power-on-good delay.
Since commit 90d28fb53d4a ("usb: core: reduce power-on-good delay time of
root hub") the hub driver sets the power-on-delay based on the
bPwrOn2PwrGood value in the hub descriptor.
xhci driver has a 20ms bPwrOn2PwrGood value for both roothubs based
on xhci spec section 5.4.8, but it's clearly not enough for the
USB 3.1 devices, causing enumeration issues.
Tests indicate full 100ms delay is needed.
Reported-by: Walt Jr. Brake <mr.yming81@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Fixes: 90d28fb53d4a ("usb: core: reduce power-on-good delay time of root hub")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211105160036.549516-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | |\|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Changes in 4.4.292
scsi: core: Put LLD module refcnt after SCSI device is released
ARM: 9120/1: Revert "amba: make use of -1 IRQs warn"
net: hso: register netdev later to avoid a race condition
IB/qib: Use struct_size() helper
IB/qib: Protect from buffer overflow in struct qib_user_sdma_pkt fields
usb: gadget: Mark USB_FSL_QE broken on 64-bit
usb-storage: Add compatibility quirk flags for iODD 2531/2541
printk/console: Allow to disable console output by using console="" or console=null
usb: hso: fix error handling code of hso_create_net_device
isofs: Fix out of bound access for corrupted isofs image
comedi: dt9812: fix DMA buffers on stack
comedi: ni_usb6501: fix NULL-deref in command paths
staging: comedi: drivers: replace le16_to_cpu() with usb_endpoint_maxp()
comedi: vmk80xx: fix transfer-buffer overflows
comedi: vmk80xx: fix bulk-buffer overflow
comedi: vmk80xx: fix bulk and interrupt message timeouts
staging: r8712u: fix control-message timeout
staging: rtl8192u: fix control-message timeouts
rsi: fix control-message timeout
Linux 4.4.292
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: If914ee57e7bf4d5993bd24826726bb4908a2f978
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 05c8f1b67e67dcd786ae3fe44492bbc617b4bd12 upstream.
These drive enclosures have firmware bugs that make it impossible to mount
a new virtual ISO image after Linux ejects the old one if the device is
locked by Linux. Windows bypasses this problem by the fact that they do
not lock the device. Add a quirk to disable device locking for these
drive enclosures.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Buren <braewoods+lkml@braewoods.net>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211014015504.2695089-1-braewoods+lkml@braewoods.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit a0548b26901f082684ad1fb3ba397d2de3a1406a upstream.
On 64-bit:
drivers/usb/gadget/udc/fsl_qe_udc.c: In function ‘qe_ep0_rx’:
drivers/usb/gadget/udc/fsl_qe_udc.c:842:13: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
842 | vaddr = (u32)phys_to_virt(in_be32(&bd->buf));
| ^
In file included from drivers/usb/gadget/udc/fsl_qe_udc.c:41:
drivers/usb/gadget/udc/fsl_qe_udc.c:843:28: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
843 | frame_set_data(pframe, (u8 *)vaddr);
| ^
The driver assumes physical and virtual addresses are 32-bit, hence it
cannot work on 64-bit platforms.
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20211027080849.3276289-1-geert@linux-m68k.org
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | |\|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Changes in 4.4.290
ALSA: seq: Fix a potential UAF by wrong private_free call order
s390: fix strrchr() implementation
xhci: Enable trust tx length quirk for Fresco FL11 USB controller
cb710: avoid NULL pointer subtraction
efi/cper: use stack buffer for error record decoding
Input: xpad - add support for another USB ID of Nacon GC-100
USB: serial: qcserial: add EM9191 QDL support
USB: serial: option: add Telit LE910Cx composition 0x1204
nvmem: Fix shift-out-of-bound (UBSAN) with byte size cells
iio: adc128s052: Fix the error handling path of 'adc128_probe()'
iio: ssp_sensors: add more range checking in ssp_parse_dataframe()
iio: ssp_sensors: fix error code in ssp_print_mcu_debug()
net: arc: select CRC32
net: korina: select CRC32
net: encx24j600: check error in devm_regmap_init_encx24j600
ethernet: s2io: fix setting mac address during resume
nfc: fix error handling of nfc_proto_register()
NFC: digital: fix possible memory leak in digital_tg_listen_mdaa()
NFC: digital: fix possible memory leak in digital_in_send_sdd_req()
pata_legacy: fix a couple uninitialized variable bugs
drm/msm: Fix null pointer dereference on pointer edp
r8152: select CRC32 and CRYPTO/CRYPTO_HASH/CRYPTO_SHA256
NFSD: Keep existing listeners on portlist error
netfilter: ipvs: make global sysctl readonly in non-init netns
NIOS2: irqflags: rename a redefined register name
can: rcar_can: fix suspend/resume
can: peak_usb: pcan_usb_fd_decode_status(): fix back to ERROR_ACTIVE state notification
can: peak_pci: peak_pci_remove(): fix UAF
ocfs2: mount fails with buffer overflow in strlen
elfcore: correct reference to CONFIG_UML
ALSA: usb-audio: Provide quirk for Sennheiser GSP670 Headset
ASoC: DAPM: Fix missing kctl change notifications
ovl: fix missing negative dentry check in ovl_rename()
nfc: nci: fix the UAF of rf_conn_info object
isdn: cpai: check ctr->cnr to avoid array index out of bound
netfilter: Kconfig: use 'default y' instead of 'm' for bool config option
ARM: dts: spear3xx: Fix gmac node
isdn: mISDN: Fix sleeping function called from invalid context
platform/x86: intel_scu_ipc: Update timeout value in comment
ALSA: hda: avoid write to STATESTS if controller is in reset
net: mdiobus: Fix memory leak in __mdiobus_register
tracing: Have all levels of checks prevent recursion
ARM: 9122/1: select HAVE_FUTEX_CMPXCHG
Linux 4.4.290
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I97fdd4fb10f590df04407cb87713af101af36f67
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit f5a8a07edafed8bede17a95ef8940fe3a57a77d5 upstream.
Add the following Telit LE910Cx composition:
0x1204: tty, adb, mbim, tty, tty, tty, tty
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20211004105655.8515-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 11c52d250b34a0862edc29db03fbec23b30db6da upstream.
When the module boots into QDL download mode it exposes the 1199:90d2
ids, which can be mapped to the qcserial driver, and used to run
firmware upgrades (e.g. with the qmi-firmware-update program).
T: Bus=01 Lev=03 Prnt=08 Port=03 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1199 ProdID=90d2 Rev=00.00
S: Manufacturer=Sierra Wireless, Incorporated
S: Product=Sierra Wireless EM9191
S: SerialNumber=8W0382004102A109
C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=2mA
I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=10 Driver=qcserial
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit ea0f69d8211963c4b2cc1998b86779a500adb502 upstream.
Tested on SD5200T TB3 dock which has Fresco Logic FL1100 USB 3.0 Host
Controller.
Before this patch streaming video from USB cam made mouse and keyboard
connected to the same USB bus unusable. Also video was jerky.
With this patch streaming video doesn't have any effect on other
periferals and video is smooth.
Cc: stable@vger.kernel.org
Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211008092547.3996295-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| |\| |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
lineage-18.1-caf-msm8998
# By Eric Dumazet (2) and others
# Via Greg Kroah-Hartman
* common/android-4.4-p:
Linux 4.4.289
perf/x86: Reset destroy callback on event init failure
scsi: virtio_scsi: Fix spelling mistake "Unsupport" -> "Unsupported"
scsi: ses: Fix unsigned comparison with less than zero
mac80211: Drop frames from invalid MAC address in ad-hoc mode
netfilter: ip6_tables: zero-initialize fragment offset
HID: apple: Fix logical maximum and usage maximum of Magic Keyboard JIS
mm: check VMA flags to avoid invalid PROT_NONE NUMA balancing
gup: document and work around "COW can break either way" issue
i40e: fix endless loop under rtnl
netlink: annotate data races around nlk->bound
ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequence
ptp_pch: Load module automatically if ID matches
net_sched: fix NULL deref in fifo_set_limit()
phy: mdio: fix memory leak
xtensa: call irqchip_init only when CONFIG_USE_OF is selected
nfsd4: Handle the NFSv4 READDIR 'dircount' hint being zero
USB: cdc-acm: fix break reporting
USB: cdc-acm: fix racy tty buffer accesses
Change-Id: I72428b366b3ed4931d8f8e8b38c7842ed48ead22
|
| | |\|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Changes in 4.4.289
USB: cdc-acm: fix racy tty buffer accesses
USB: cdc-acm: fix break reporting
nfsd4: Handle the NFSv4 READDIR 'dircount' hint being zero
xtensa: call irqchip_init only when CONFIG_USE_OF is selected
phy: mdio: fix memory leak
net_sched: fix NULL deref in fifo_set_limit()
ptp_pch: Load module automatically if ID matches
ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequence
netlink: annotate data races around nlk->bound
i40e: fix endless loop under rtnl
gup: document and work around "COW can break either way" issue
mm: check VMA flags to avoid invalid PROT_NONE NUMA balancing
HID: apple: Fix logical maximum and usage maximum of Magic Keyboard JIS
netfilter: ip6_tables: zero-initialize fragment offset
mac80211: Drop frames from invalid MAC address in ad-hoc mode
scsi: ses: Fix unsigned comparison with less than zero
scsi: virtio_scsi: Fix spelling mistake "Unsupport" -> "Unsupported"
perf/x86: Reset destroy callback on event init failure
Linux 4.4.289
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I3a65de3023522d2c5370858c3f0e98e86ad6b7ff
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 58fc1daa4d2e9789b9ffc880907c961ea7c062cc upstream.
A recent change that started reporting break events forgot to push the
event to the line discipline, which meant that a detected break would
not be reported until further characters had been receive (the port
could even have been closed and reopened in between).
Fixes: 08dff274edda ("cdc-acm: fix BREAK rx code path adding necessary calls")
Cc: stable@vger.kernel.org
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210929090937.7410-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 65a205e6113506e69a503b61d97efec43fc10fd7 upstream.
A recent change that started reporting break events to the line
discipline caused the tty-buffer insertions to no longer be serialised
by inserting events also from the completion handler for the interrupt
endpoint.
Completion calls for distinct endpoints are not guaranteed to be
serialised. For example, in case a host-controller driver uses
bottom-half completion, the interrupt and bulk-in completion handlers
can end up running in parallel on two CPUs (high-and low-prio tasklets,
respectively) thereby breaking the tty layer's single producer
assumption.
Fix this by holding the read lock also when inserting characters from
the bulk endpoint.
Fixes: 08dff274edda ("cdc-acm: fix BREAK rx code path adding necessary calls")
Cc: stable@vger.kernel.org
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210929090937.7410-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| |\| |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
lineage-18.1-caf-msm8998
# By Sergey Shtylyov (9) and others
# Via Greg Kroah-Hartman
* common/android-4.4-p:
Linux 4.4.288
libata: Add ATA_HORKAGE_NO_NCQ_ON_ATI for Samsung 860 and 870 SSD.
usb: testusb: Fix for showing the connection speed
scsi: sd: Free scsi_disk device via put_device()
ext2: fix sleeping in atomic bugs on error
sparc64: fix pci_iounmap() when CONFIG_PCI is not set
xen-netback: correct success/error reporting for the SKB-with-fraglist case
af_unix: fix races in sk_peer_pid and sk_peer_cred accesses
Linux 4.4.287
Revert "arm64: Mark __stack_chk_guard as __ro_after_init"
Linux 4.4.286
cred: allow get_cred() and put_cred() to be given NULL.
HID: usbhid: free raw_report buffers in usbhid_stop
netfilter: ipset: Fix oversized kvmalloc() calls
HID: betop: fix slab-out-of-bounds Write in betop_probe
arm64: Extend workaround for erratum 1024718 to all versions of Cortex-A55
EDAC/synopsys: Fix wrong value type assignment for edac_mode
ext4: fix potential infinite loop in ext4_dx_readdir()
ipack: ipoctal: fix module reference leak
ipack: ipoctal: fix missing allocation-failure check
ipack: ipoctal: fix tty-registration error handling
ipack: ipoctal: fix tty registration race
ipack: ipoctal: fix stack information leak
e100: fix buffer overrun in e100_get_regs
e100: fix length calculation in e100_get_regs_len
ipvs: check that ip_vs_conn_tab_bits is between 8 and 20
mac80211: fix use-after-free in CCMP/GCMP RX
tty: Fix out-of-bound vmalloc access in imageblit
qnx4: work around gcc false positive warning bug
spi: Fix tegra20 build with CONFIG_PM=n
net: 6pack: Fix tx timeout and slot time
alpha: Declare virt_to_phys and virt_to_bus parameter as pointer to volatile
arm64: Mark __stack_chk_guard as __ro_after_init
parisc: Use absolute_pointer() to define PAGE0
qnx4: avoid stringop-overread errors
sparc: avoid stringop-overread errors
net: i825xx: Use absolute_pointer for memcpy from fixed memory location
compiler.h: Introduce absolute_pointer macro
m68k: Double cast io functions to unsigned long
blktrace: Fix uaf in blk_trace access after removing by sysfs
scsi: iscsi: Adjust iface sysfs attr detection
net/mlx4_en: Don't allow aRFS for encapsulated packets
net: hso: fix muxed tty registration
USB: serial: option: add device id for Foxconn T99W265
USB: serial: option: remove duplicate USB device ID
USB: serial: option: add Telit LN920 compositions
USB: serial: mos7840: remove duplicated 0xac24 device ID
USB: serial: cp210x: add ID for GW Instek GDM-834x Digital Multimeter
xen/x86: fix PV trap handling on secondary processors
cifs: fix incorrect check for null pointer in header_assemble
usb: musb: tusb6010: uninitialized data in tusb_fifo_write_unaligned()
usb: gadget: r8a66597: fix a loop in set_feature()
Linux 4.4.285
sctp: validate from_addr_param return
drm/nouveau/nvkm: Replace -ENOSYS with -ENODEV
blk-throttle: fix UAF by deleteing timer in blk_throtl_exit()
nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group
nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group
nilfs2: fix NULL pointer in nilfs_##name##_attr_release
nilfs2: fix memory leak in nilfs_sysfs_create_device_group
ceph: lockdep annotations for try_nonblocking_invalidate
dmaengine: ioat: depends on !UML
parisc: Move pci_dev_is_behind_card_dino to where it is used
dmaengine: acpi: Avoid comparison GSI with Linux vIRQ
dmaengine: acpi-dma: check for 64-bit MMIO address
profiling: fix shift-out-of-bounds bugs
prctl: allow to setup brk for et_dyn executables
9p/trans_virtio: Remove sysfs file on probe failure
thermal/drivers/exynos: Fix an error code in exynos_tmu_probe()
sctp: add param size validation for SCTP_PARAM_SET_PRIMARY
sctp: validate chunk size in __rcv_asconf_lookup
PM / wakeirq: Fix unbalanced IRQ enable for wakeirq
s390/bpf: Fix optimizing out zero-extensions
Linux 4.4.284
s390/bpf: Fix 64-bit subtraction of the -0x80000000 constant
net: renesas: sh_eth: Fix freeing wrong tx descriptor
qlcnic: Remove redundant unlock in qlcnic_pinit_from_rom
ARC: export clear_user_page() for modules
mtd: rawnand: cafe: Fix a resource leak in the error handling path of 'cafe_nand_probe()'
PCI: Sync __pci_register_driver() stub for CONFIG_PCI=n
ethtool: Fix an error code in cxgb2.c
dt-bindings: mtd: gpmc: Fix the ECC bytes vs. OOB bytes equation
x86/mm: Fix kern_addr_valid() to cope with existing but not present entries
net/af_unix: fix a data-race in unix_dgram_poll
tipc: increase timeout in tipc_sk_enqueue()
r6040: Restore MDIO clock frequency after MAC reset
net/l2tp: Fix reference count leak in l2tp_udp_recv_core
dccp: don't duplicate ccid when cloning dccp sock
ptp: dp83640: don't define PAGE0
net-caif: avoid user-triggerable WARN_ON(1)
bnx2x: Fix enabling network interfaces without VFs
platform/chrome: cros_ec_proto: Send command again when timeout occurs
parisc: fix crash with signals and alloca
net: fix NULL pointer reference in cipso_v4_doi_free
ath9k: fix OOB read ar9300_eeprom_restore_internal
parport: remove non-zero check on count
Revert "USB: xhci: fix U1/U2 handling for hardware with XHCI_INTEL_HOST quirk set"
cifs: fix wrong release in sess_alloc_buffer() failed path
mmc: rtsx_pci: Fix long reads when clock is prescaled
gfs2: Don't call dlm after protocol is unmounted
rpc: fix gss_svc_init cleanup on failure
ARM: tegra: tamonten: Fix UART pad setting
gpu: drm: amd: amdgpu: amdgpu_i2c: fix possible uninitialized-variable access in amdgpu_i2c_router_select_ddc_port()
Bluetooth: skip invalid hci_sync_conn_complete_evt
serial: 8250_pci: make setup_port() parameters explicitly unsigned
hvsi: don't panic on tty_register_driver failure
xtensa: ISS: don't panic in rs_init
serial: 8250: Define RX trigger levels for OxSemi 950 devices
s390/jump_label: print real address in a case of a jump label bug
ipv4: ip_output.c: Fix out-of-bounds warning in ip_copy_addrs()
video: fbdev: riva: Error out if 'pixclock' equals zero
video: fbdev: kyro: Error out if 'pixclock' equals zero
video: fbdev: asiliantfb: Error out if 'pixclock' equals zero
bpf/tests: Do not PASS tests without actually testing the result
bpf/tests: Fix copy-and-paste error in double word test
tty: serial: jsm: hold port lock when reporting modem line changes
usb: gadget: u_ether: fix a potential null pointer dereference
usb: host: fotg210: fix the actual_length of an iso packet
Smack: Fix wrong semantics in smk_access_entry()
netlink: Deal with ESRCH error in nlmsg_notify()
video: fbdev: kyro: fix a DoS bug by restricting user input
iio: dac: ad5624r: Fix incorrect handling of an optional regulator.
PCI: Use pci_update_current_state() in pci_enable_device_flags()
crypto: mxs-dcp - Use sg_mapping_iter to copy data
pinctrl: single: Fix error return code in pcs_parse_bits_in_pinctrl_entry()
openrisc: don't printk() unconditionally
PCI: Return ~0 data on pciconfig_read() CAP_SYS_ADMIN failure
PCI: Restrict ASMedia ASM1062 SATA Max Payload Size Supported
ARM: 9105/1: atags_to_fdt: don't warn about stack size
libata: add ATA_HORKAGE_NO_NCQ_TRIM for Samsung 860 and 870 SSDs
media: rc-loopback: return number of emitters rather than error
media: uvc: don't do DMA on stack
VMCI: fix NULL pointer dereference when unmapping queue pair
power: supply: max17042: handle fails of reading status register
xen: fix setting of max_pfn in shared_info
PCI/MSI: Skip masking MSI-X on Xen PV
rtc: tps65910: Correct driver module alias
fbmem: don't allow too huge resolutions
clk: kirkwood: Fix a clocking boot regression
KVM: x86: Update vCPU's hv_clock before back to guest when tsc_offset is adjusted
tty: Fix data race between tiocsti() and flush_to_ldisc()
ipv4: make exception cache less predictible
bcma: Fix memory leak for internally-handled cores
ath6kl: wmi: fix an error code in ath6kl_wmi_sync_point()
usb: ehci-orion: Handle errors of clk_prepare_enable() in probe
i2c: mt65xx: fix IRQ check
CIFS: Fix a potencially linear read overflow
mmc: moxart: Fix issue with uninitialized dma_slave_config
mmc: dw_mmc: Fix issue with uninitialized dma_slave_config
i2c: s3c2410: fix IRQ check
i2c: iop3xx: fix deferred probing
Bluetooth: add timeout sanity check to hci_inquiry
usb: gadget: mv_u3d: request_irq() after initializing UDC
usb: phy: tahvo: add IRQ check
usb: host: ohci-tmio: add IRQ check
Bluetooth: Move shutdown callback before flushing tx and rx queue
usb: phy: twl6030: add IRQ checks
usb: phy: fsl-usb: add IRQ check
usb: gadget: udc: at91: add IRQ check
drm/msm/dsi: Fix some reference counted resource leaks
Bluetooth: fix repeated calls to sco_sock_kill
arm64: dts: exynos: correct GIC CPU interfaces address range on Exynos7
Bluetooth: increase BTNAMSIZ to 21 chars to fix potential buffer overflow
PCI: PM: Enable PME if it can be signaled from D3cold
i2c: highlander: add IRQ check
net: cipso: fix warnings in netlbl_cipsov4_add_std
tcp: seq_file: Avoid skipping sk during tcp_seek_last_pos
Bluetooth: sco: prevent information leak in sco_conn_defer_accept()
media: go7007: remove redundant initialization
media: dvb-usb: fix uninit-value in vp702x_read_mac_addr
media: dvb-usb: fix uninit-value in dvb_usb_adapter_dvb_init
certs: Trigger creation of RSA module signing key if it's not an RSA key
m68k: emu: Fix invalid free in nfeth_cleanup()
udf_get_extendedattr() had no boundary checks.
crypto: qat - fix reuse of completion variable
crypto: qat - do not ignore errors from enable_vf2pf_comms()
libata: fix ata_host_start()
power: supply: max17042_battery: fix typo in MAx17042_TOFF
crypto: omap-sham - clear dma flags only after omap_sham_update_dma_stop()
crypto: mxs-dcp - Check for DMA mapping errors
PCI: Call Max Payload Size-related fixup quirks early
x86/reboot: Limit Dell Optiplex 990 quirk to early BIOS versions
Revert "btrfs: compression: don't try to compress if we don't have enough pages"
mm/page_alloc: speed up the iteration of max_order
net: ll_temac: Remove left-over debug message
powerpc/boot: Delete unneeded .globl _zimage_start
powerpc/module64: Fix comment in R_PPC64_ENTRY handling
mm/kmemleak.c: make cond_resched() rate-limiting more efficient
s390/disassembler: correct disassembly lines alignment
ipv4/icmp: l3mdev: Perform icmp error route lookup on source device routing table (v2)
tc358743: fix register i2c_rd/wr function fix
PM / wakeirq: Enable dedicated wakeirq for suspend
USB: serial: mos7720: improve OOM-handling in read_mos_reg()
usb: phy: isp1301: Fix build warning when CONFIG_OF is disabled
igmp: Add ip_mc_list lock in ip_check_mc_rcu
media: stkwebcam: fix memory leak in stk_camera_probe
ath9k: Postpone key cache entry deletion for TXQ frames reference it
ath: Modify ath_key_delete() to not need full key entry
ath: Export ath_hw_keysetmac()
ath9k: Clear key cache explicitly on disabling hardware
ath: Use safer key clearing with key cache entries
ALSA: pcm: fix divide error in snd_pcm_lib_ioctl
ARM: 8918/2: only build return_address() if needed
cryptoloop: add a deprecation warning
qede: Fix memset corruption
ARC: fix allnoconfig build warning
xtensa: fix kconfig unmet dependency warning for HAVE_FUTEX_CMPXCHG
ext4: fix race writing to an inline_data file while its xattrs are changing
Change-Id: I0d3200388e095f977c784cba314b9cc061848c7a
|
| | |\|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Changes in 4.4.286
usb: gadget: r8a66597: fix a loop in set_feature()
usb: musb: tusb6010: uninitialized data in tusb_fifo_write_unaligned()
cifs: fix incorrect check for null pointer in header_assemble
xen/x86: fix PV trap handling on secondary processors
USB: serial: cp210x: add ID for GW Instek GDM-834x Digital Multimeter
USB: serial: mos7840: remove duplicated 0xac24 device ID
USB: serial: option: add Telit LN920 compositions
USB: serial: option: remove duplicate USB device ID
USB: serial: option: add device id for Foxconn T99W265
net: hso: fix muxed tty registration
net/mlx4_en: Don't allow aRFS for encapsulated packets
scsi: iscsi: Adjust iface sysfs attr detection
blktrace: Fix uaf in blk_trace access after removing by sysfs
m68k: Double cast io functions to unsigned long
compiler.h: Introduce absolute_pointer macro
net: i825xx: Use absolute_pointer for memcpy from fixed memory location
sparc: avoid stringop-overread errors
qnx4: avoid stringop-overread errors
parisc: Use absolute_pointer() to define PAGE0
arm64: Mark __stack_chk_guard as __ro_after_init
alpha: Declare virt_to_phys and virt_to_bus parameter as pointer to volatile
net: 6pack: Fix tx timeout and slot time
spi: Fix tegra20 build with CONFIG_PM=n
qnx4: work around gcc false positive warning bug
tty: Fix out-of-bound vmalloc access in imageblit
mac80211: fix use-after-free in CCMP/GCMP RX
ipvs: check that ip_vs_conn_tab_bits is between 8 and 20
e100: fix length calculation in e100_get_regs_len
e100: fix buffer overrun in e100_get_regs
ipack: ipoctal: fix stack information leak
ipack: ipoctal: fix tty registration race
ipack: ipoctal: fix tty-registration error handling
ipack: ipoctal: fix missing allocation-failure check
ipack: ipoctal: fix module reference leak
ext4: fix potential infinite loop in ext4_dx_readdir()
EDAC/synopsys: Fix wrong value type assignment for edac_mode
arm64: Extend workaround for erratum 1024718 to all versions of Cortex-A55
HID: betop: fix slab-out-of-bounds Write in betop_probe
netfilter: ipset: Fix oversized kvmalloc() calls
HID: usbhid: free raw_report buffers in usbhid_stop
cred: allow get_cred() and put_cred() to be given NULL.
Linux 4.4.286
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I3180bfeaddc99c8d216f932c9f149060cc60f16e
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 9e3eed534f8235a4a596a9dae5b8a6425d81ea1a upstream.
Adding support for Foxconn device T99W265 for enumeration with
PID 0xe0db.
usb-devices output for 0xe0db
T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 19 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
P: Vendor=0489 ProdID=e0db Rev=05.04
S: Manufacturer=Microsoft
S: Product=Generic Mobile Broadband Adapter
S: SerialNumber=6c50f452
C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
if0/1: MBIM, if2:Diag, if3:GNSS, if4: Modem
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20210917110106.9852-1-slark_xiao@163.com
[ johan: use USB_DEVICE_INTERFACE_CLASS(), amend comment ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 1ca200a8c6f079950a04ea3c3380fe8cf78e95a2 upstream.
The device ZTE 0x0094 is already on the list.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Fixes: b9e44fe5ecda ("USB: option: cleanup zte 3g-dongle's pid in option.c")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 7bb057134d609b9c038a00b6876cf0d37d0118ce upstream.
This patch adds the following Telit LN920 compositions:
0x1060: tty, adb, rmnet, tty, tty, tty, tty
0x1061: tty, adb, mbim, tty, tty, tty, tty
0x1062: rndis, tty, adb, tty, tty, tty, tty
0x1063: tty, adb, ecm, tty, tty, tty, tty
Signed-off-by: Carlo Lobrano <c.lobrano@gmail.com>
Link: https://lore.kernel.org/r/20210903123913.1086513-1-c.lobrano@gmail.com
Reviewed-by: Daniele Palmas <dnlplm@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 211f323768a25b30c106fd38f15a0f62c7c2b5f4 upstream.
0xac24 device ID is already defined and used via
BANDB_DEVICE_ID_USO9ML2_4. Remove the duplicate from the list.
Fixes: 27f1281d5f72 ("USB: serial: Extra device/vendor ID for mos7840 driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 3bd18ba7d859eb1fbef3beb1e80c24f6f7d7596c upstream.
Add the USB serial device ID for the GW Instek GDM-834x Digital Multimeter.
Signed-off-by: Uwe Brandt <uwe.brandt@gmail.com>
Link: https://lore.kernel.org/r/YUxFl3YUCPGJZd8Y@hovoldconsulting.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 517c7bf99bad3d6b9360558414aae634b7472d80 upstream.
This is writing to the first 1 - 3 bytes of "val" and then writing all
four bytes to musb_writel(). The last byte is always going to be
garbage. Zero out the last bytes instead.
Fixes: 550a7375fe72 ("USB: Add MUSB and TUSB support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210916135737.GI25094@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 17956b53ebff6a490baf580a836cbd3eae94892b upstream.
This loop is supposed to loop until if reads something other than
CS_IDST or until it times out after 30,000 attempts. But because of
the || vs && bug, it will never time out and instead it will loop a
minimum of 30,000 times.
This bug is quite old but the code is only used in USB_DEVICE_TEST_MODE
so it probably doesn't affect regular usage.
Fixes: 96fe53ef5498 ("usb: gadget: r8a66597-udc: add support for TEST_MODE")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210906094221.GA10957@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | |\|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Changes in 4.4.284
ext4: fix race writing to an inline_data file while its xattrs are changing
xtensa: fix kconfig unmet dependency warning for HAVE_FUTEX_CMPXCHG
ARC: fix allnoconfig build warning
qede: Fix memset corruption
cryptoloop: add a deprecation warning
ARM: 8918/2: only build return_address() if needed
ALSA: pcm: fix divide error in snd_pcm_lib_ioctl
ath: Use safer key clearing with key cache entries
ath9k: Clear key cache explicitly on disabling hardware
ath: Export ath_hw_keysetmac()
ath: Modify ath_key_delete() to not need full key entry
ath9k: Postpone key cache entry deletion for TXQ frames reference it
media: stkwebcam: fix memory leak in stk_camera_probe
igmp: Add ip_mc_list lock in ip_check_mc_rcu
usb: phy: isp1301: Fix build warning when CONFIG_OF is disabled
USB: serial: mos7720: improve OOM-handling in read_mos_reg()
PM / wakeirq: Enable dedicated wakeirq for suspend
tc358743: fix register i2c_rd/wr function fix
ipv4/icmp: l3mdev: Perform icmp error route lookup on source device routing table (v2)
s390/disassembler: correct disassembly lines alignment
mm/kmemleak.c: make cond_resched() rate-limiting more efficient
powerpc/module64: Fix comment in R_PPC64_ENTRY handling
powerpc/boot: Delete unneeded .globl _zimage_start
net: ll_temac: Remove left-over debug message
mm/page_alloc: speed up the iteration of max_order
Revert "btrfs: compression: don't try to compress if we don't have enough pages"
x86/reboot: Limit Dell Optiplex 990 quirk to early BIOS versions
PCI: Call Max Payload Size-related fixup quirks early
crypto: mxs-dcp - Check for DMA mapping errors
crypto: omap-sham - clear dma flags only after omap_sham_update_dma_stop()
power: supply: max17042_battery: fix typo in MAx17042_TOFF
libata: fix ata_host_start()
crypto: qat - do not ignore errors from enable_vf2pf_comms()
crypto: qat - fix reuse of completion variable
udf_get_extendedattr() had no boundary checks.
m68k: emu: Fix invalid free in nfeth_cleanup()
certs: Trigger creation of RSA module signing key if it's not an RSA key
media: dvb-usb: fix uninit-value in dvb_usb_adapter_dvb_init
media: dvb-usb: fix uninit-value in vp702x_read_mac_addr
media: go7007: remove redundant initialization
Bluetooth: sco: prevent information leak in sco_conn_defer_accept()
tcp: seq_file: Avoid skipping sk during tcp_seek_last_pos
net: cipso: fix warnings in netlbl_cipsov4_add_std
i2c: highlander: add IRQ check
PCI: PM: Enable PME if it can be signaled from D3cold
Bluetooth: increase BTNAMSIZ to 21 chars to fix potential buffer overflow
arm64: dts: exynos: correct GIC CPU interfaces address range on Exynos7
Bluetooth: fix repeated calls to sco_sock_kill
drm/msm/dsi: Fix some reference counted resource leaks
usb: gadget: udc: at91: add IRQ check
usb: phy: fsl-usb: add IRQ check
usb: phy: twl6030: add IRQ checks
Bluetooth: Move shutdown callback before flushing tx and rx queue
usb: host: ohci-tmio: add IRQ check
usb: phy: tahvo: add IRQ check
usb: gadget: mv_u3d: request_irq() after initializing UDC
Bluetooth: add timeout sanity check to hci_inquiry
i2c: iop3xx: fix deferred probing
i2c: s3c2410: fix IRQ check
mmc: dw_mmc: Fix issue with uninitialized dma_slave_config
mmc: moxart: Fix issue with uninitialized dma_slave_config
CIFS: Fix a potencially linear read overflow
i2c: mt65xx: fix IRQ check
usb: ehci-orion: Handle errors of clk_prepare_enable() in probe
ath6kl: wmi: fix an error code in ath6kl_wmi_sync_point()
bcma: Fix memory leak for internally-handled cores
ipv4: make exception cache less predictible
tty: Fix data race between tiocsti() and flush_to_ldisc()
KVM: x86: Update vCPU's hv_clock before back to guest when tsc_offset is adjusted
clk: kirkwood: Fix a clocking boot regression
fbmem: don't allow too huge resolutions
rtc: tps65910: Correct driver module alias
PCI/MSI: Skip masking MSI-X on Xen PV
xen: fix setting of max_pfn in shared_info
power: supply: max17042: handle fails of reading status register
VMCI: fix NULL pointer dereference when unmapping queue pair
media: uvc: don't do DMA on stack
media: rc-loopback: return number of emitters rather than error
libata: add ATA_HORKAGE_NO_NCQ_TRIM for Samsung 860 and 870 SSDs
ARM: 9105/1: atags_to_fdt: don't warn about stack size
PCI: Restrict ASMedia ASM1062 SATA Max Payload Size Supported
PCI: Return ~0 data on pciconfig_read() CAP_SYS_ADMIN failure
openrisc: don't printk() unconditionally
pinctrl: single: Fix error return code in pcs_parse_bits_in_pinctrl_entry()
crypto: mxs-dcp - Use sg_mapping_iter to copy data
PCI: Use pci_update_current_state() in pci_enable_device_flags()
iio: dac: ad5624r: Fix incorrect handling of an optional regulator.
video: fbdev: kyro: fix a DoS bug by restricting user input
netlink: Deal with ESRCH error in nlmsg_notify()
Smack: Fix wrong semantics in smk_access_entry()
usb: host: fotg210: fix the actual_length of an iso packet
usb: gadget: u_ether: fix a potential null pointer dereference
tty: serial: jsm: hold port lock when reporting modem line changes
bpf/tests: Fix copy-and-paste error in double word test
bpf/tests: Do not PASS tests without actually testing the result
video: fbdev: asiliantfb: Error out if 'pixclock' equals zero
video: fbdev: kyro: Error out if 'pixclock' equals zero
video: fbdev: riva: Error out if 'pixclock' equals zero
ipv4: ip_output.c: Fix out-of-bounds warning in ip_copy_addrs()
s390/jump_label: print real address in a case of a jump label bug
serial: 8250: Define RX trigger levels for OxSemi 950 devices
xtensa: ISS: don't panic in rs_init
hvsi: don't panic on tty_register_driver failure
serial: 8250_pci: make setup_port() parameters explicitly unsigned
Bluetooth: skip invalid hci_sync_conn_complete_evt
gpu: drm: amd: amdgpu: amdgpu_i2c: fix possible uninitialized-variable access in amdgpu_i2c_router_select_ddc_port()
ARM: tegra: tamonten: Fix UART pad setting
rpc: fix gss_svc_init cleanup on failure
gfs2: Don't call dlm after protocol is unmounted
mmc: rtsx_pci: Fix long reads when clock is prescaled
cifs: fix wrong release in sess_alloc_buffer() failed path
Revert "USB: xhci: fix U1/U2 handling for hardware with XHCI_INTEL_HOST quirk set"
parport: remove non-zero check on count
ath9k: fix OOB read ar9300_eeprom_restore_internal
net: fix NULL pointer reference in cipso_v4_doi_free
parisc: fix crash with signals and alloca
platform/chrome: cros_ec_proto: Send command again when timeout occurs
bnx2x: Fix enabling network interfaces without VFs
net-caif: avoid user-triggerable WARN_ON(1)
ptp: dp83640: don't define PAGE0
dccp: don't duplicate ccid when cloning dccp sock
net/l2tp: Fix reference count leak in l2tp_udp_recv_core
r6040: Restore MDIO clock frequency after MAC reset
tipc: increase timeout in tipc_sk_enqueue()
net/af_unix: fix a data-race in unix_dgram_poll
x86/mm: Fix kern_addr_valid() to cope with existing but not present entries
dt-bindings: mtd: gpmc: Fix the ECC bytes vs. OOB bytes equation
ethtool: Fix an error code in cxgb2.c
PCI: Sync __pci_register_driver() stub for CONFIG_PCI=n
mtd: rawnand: cafe: Fix a resource leak in the error handling path of 'cafe_nand_probe()'
ARC: export clear_user_page() for modules
qlcnic: Remove redundant unlock in qlcnic_pinit_from_rom
net: renesas: sh_eth: Fix freeing wrong tx descriptor
s390/bpf: Fix 64-bit subtraction of the -0x80000000 constant
Linux 4.4.284
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Idf3220461e42648ba134a245e9670231dbd18b5c
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
quirk set"
[ Upstream commit 2847c46c61486fd8bca9136a6e27177212e78c69 ]
This reverts commit 5d5323a6f3625f101dbfa94ba3ef7706cce38760.
That commit effectively disabled Intel host initiated U1/U2 lpm for devices
with periodic endpoints.
Before that commit we disabled host initiated U1/U2 lpm if the exit latency
was larger than any periodic endpoint service interval, this is according
to xhci spec xhci 1.1 specification section 4.23.5.2
After that commit we incorrectly checked that service interval was smaller
than U1/U2 inactivity timeout. This is not relevant, and can't happen for
Intel hosts as previously set U1/U2 timeout = 105% * service interval.
Patch claimed it solved cases where devices can't be enumerated because of
bandwidth issues. This might be true but it's a side effect of accidentally
turning off lpm.
exit latency calculations have been revised since then
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210820123503.2605901-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 8ae01239609b29ec2eff55967c8e0fe3650cfa09 ]
f_ncm tx timeout can call us with null skb to flush
a pending frame. In this case skb is NULL to begin
with but ceases to be null after dev->wrap() completes.
In such a case in->maxpacket will be read, even though
we've failed to check that 'in' is not NULL.
Though I've never observed this fail in practice,
however the 'flush operation' simply does not make sense with
a null usb IN endpoint - there's nowhere to flush to...
(note that we're the gadget/device, and IN is from the point
of view of the host, so here IN actually means outbound...)
Cc: Brooke Basile <brookebasile@gmail.com>
Cc: "Bryan O'Donoghue" <bryan.odonoghue@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20210701114834.884597-6-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 091cb2f782f32ab68c6f5f326d7868683d3d4875 ]
We should acquire the actual_length of an iso packet
from the iTD directly using FOTG210_ITD_LENGTH() macro.
Signed-off-by: Kelly Devilliv <kelly.devilliv@gmail.com>
Link: https://lore.kernel.org/r/20210627125747.127646-4-kelly.devilliv@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 4720f1bf4ee4a784d9ece05420ba33c9222a3004 ]
ehci_orion_drv_probe() did not account for possible errors of
clk_prepare_enable() that in particular could cause invocation of
clk_disable_unprepare() on clocks that were not prepared/enabled yet,
e.g. in remove or on handling errors of usb_add_hcd() in probe. Though,
there were several patches fixing different issues with clocks in this
driver, they did not solve this problem.
Add handling of errors of clk_prepare_enable() in ehci_orion_drv_probe()
to avoid calls of clk_disable_unprepare() without previous successful
invocation of clk_prepare_enable().
Found by Linux Driver Verification project (linuxtesting.org).
Fixes: 8c869edaee07 ("ARM: Orion: EHCI: Add support for enabling clocks")
Co-developed-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Link: https://lore.kernel.org/r/20210825170902.11234-1-novikov@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 2af0c5ffadaf9d13eca28409d4238b4e672942d3 ]
If IRQ occurs between calling request_irq() and mv_u3d_eps_init(),
then null pointer dereference occurs since u3d->eps[] wasn't
initialized yet but used in mv_u3d_nuke().
The patch puts registration of the interrupt handler after
initializing of neccesery data.
Found by Linux Driver Verification project (linuxtesting.org).
Fixes: 90fccb529d24 ("usb: gadget: Gadget directory cleanup - group UDC drivers")
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru>
Link: https://lore.kernel.org/r/20210818141247.4794-1-lutovinova@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 0d45a1373e669880b8beaecc8765f44cb0241e47 ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to request_threaded_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding an
original error code. Stop calling request_threaded_irq() with the invalid
IRQ #s.
Fixes: 9ba96ae5074c ("usb: omap1: Tahvo USB transceiver driver")
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/8280d6a4-8e9a-7cfe-1aa9-db586dc9afdf@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 4ac5132e8a4300637a2da8f5d6bc7650db735b8a ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to usb_add_hcd() (which takes
*unsigned* IRQ #), causing request_irq() that it calls to fail with
-EINVAL, overriding an original error code. Stop calling usb_add_hcd()
with the invalid IRQ #s.
Fixes: 78c73414f4f6 ("USB: ohci: add support for tmio-ohci cell")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/402e1a45-a0a4-0e08-566a-7ca1331506b1@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 0881e22c06e66af0b64773c91c8868ead3d01aa1 ]
The driver neglects to check the result of platform_get_irq()'s calls and
blithely passes the negative error codes to request_threaded_irq() (which
takes *unsigned* IRQ #), causing them both to fail with -EINVAL, overriding
an original error code. Stop calling request_threaded_irq() with the
invalid IRQ #s.
Fixes: c33fad0c3748 ("usb: otg: Adding twl6030-usb transceiver driver for OMAP4430")
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/9507f50b-50f1-6dc4-f57c-3ed4e53a1c25@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit ecc2f30dbb25969908115c81ec23650ed982b004 ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to request_irq() (which takes
*unsigned* IRQ #), causing it to fail with -EINVAL, overriding an original
error code. Stop calling request_irq() with the invalid IRQ #s.
Fixes: 0807c500a1a6 ("USB: add Freescale USB OTG Transceiver driver")
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/b0a86089-8b8b-122e-fd6d-73e8c2304964@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 50855c31573b02963f0aa2aacfd4ea41c31ae0e0 ]
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which takes
*unsigned* IRQ #), causing it to fail with -EINVAL, overriding an original
error code. Stop calling devm_request_irq() with the invalid IRQ #s.
Fixes: 8b2e76687b39 ("USB: AT91 UDC updates, mostly power management")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Felipe Balbi <balbi@kernel.org>
Link: https://lore.kernel.org/r/6654a224-739a-1a80-12f0-76d920f87b6c@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 161a582bd1d8681095f158d11bc679a58f1d026b upstream.
clang static analysis reports this problem
mos7720.c:352:2: warning: Undefined or garbage value returned to caller
return d;
^~~~~~~~
In the parport_mos7715_read_data()'s call to read_mos_reg(), 'd' is
only set after the alloc block.
buf = kmalloc(1, GFP_KERNEL);
if (!buf)
return -ENOMEM;
Although the problem is reported in parport_most7715_read_data(),
none of the callee's of read_mos_reg() check the return status.
Make sure to clear the return-value buffer also on allocation failures.
Fixes: 0d130367abf5 ("USB: serial: mos7720: fix control-message error handling")
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20210111220904.1035957-1-trix@redhat.com
[ johan: only clear the buffer on errors, amend commit message ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit a7f12a21f6b32bdd8d76d3af81eef9e72ce41ec0 upstream.
Commit fd567653bdb9 ("usb: phy: isp1301: Add OF device ID table")
added an OF device ID table, but used the of_match_ptr() macro
that will lead to a build warning if CONFIG_OF symbol is disabled:
drivers/usb/phy//phy-isp1301.c:36:34: warning: ‘isp1301_of_match’ defined but not used [-Wunused-const-variable=]
static const struct of_device_id isp1301_of_match[] = {
^~~~~~~~~~~~~~~~
Fixes: fd567653bdb9 ("usb: phy: isp1301: Add OF device ID table")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| |\| |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
lineage-18.1-caf-msm8998
# By Thomas Gleixner (11) and others
# Via Greg Kroah-Hartman
* google/common/android-4.4-p:
Linux 4.4.283
Revert "floppy: reintroduce O_NDELAY fix"
fbmem: add margin check to fb_check_caps()
vt_kdsetmode: extend console locking
vringh: Use wiov->used to check for read/write desc order
virtio: Improve vq->broken access to avoid any compiler optimization
net: marvell: fix MVNETA_TX_IN_PRGRS bit number
e1000e: Fix the max snoop/no-snoop latency for 10M
USB: serial: option: add new VID/PID to support Fibocom FG150
Revert "USB: serial: ch341: fix character loss at high transfer rates"
can: usb: esd_usb2: esd_usb2_rx_event(): fix the interchange of the CAN RX and TX error counters
Linux 4.4.282
mmc: dw_mmc: Fix occasional hang after tuning on eMMC
ASoC: intel: atom: Fix breakage for PCM buffer address setup
ipack: tpci200: fix many double free issues in tpci200_pci_probe
ALSA: hda - fix the 'Capture Switch' value change notifications
mmc: dw_mmc: Fix hang on data CRC error
mmc: dw_mmc: call the dw_mci_prep_stop_abort() by default
mmc: dw_mmc: Wait for data transfer after response errors.
net: qlcnic: add missed unlock in qlcnic_83xx_flash_read32
net: 6pack: fix slab-out-of-bounds in decode_data
dccp: add do-while-0 stubs for dccp_pr_debug macros
Bluetooth: hidp: use correct wait queue when removing ctrl_wait
scsi: core: Avoid printing an error if target_alloc() returns -ENXIO
scsi: megaraid_mm: Fix end of loop tests for list_for_each_entry()
dmaengine: of-dma: router_xlate to return -EPROBE_DEFER if controller is not yet available
ARM: dts: am43x-epos-evm: Reduce i2c0 bus speed for tps65218
dmaengine: usb-dmac: Fix PM reference leak in usb_dmac_probe()
KVM: nSVM: avoid picking up unsupported bits from L2 in int_ctl (CVE-2021-3653)
vmlinux.lds.h: Handle clang's module.{c,d}tor sections
PCI/MSI: Enforce MSI[X] entry updates to be visible
PCI/MSI: Enforce that MSI-X table entry is masked for update
PCI/MSI: Mask all unused MSI-X entries
PCI/MSI: Protect msi_desc::masked for multi-MSI
PCI/MSI: Use msi_mask_irq() in pci_msi_shutdown()
PCI/MSI: Correct misleading comments
PCI/MSI: Do not set invalid bits in MSI mask
PCI/MSI: Enable and mask MSI-X early
x86/tools: Fix objdump version check again
xen/events: Fix race in set_evtchn_to_irq
net: Fix memory leak in ieee802154_raw_deliver
i2c: dev: zero out array used for i2c reads from userspace
ASoC: intel: atom: Fix reference to PCM buffer address
ANDROID: xt_quota2: set usersize in xt_match registration object
ANDROID: xt_quota2: clear quota2_log message before sending
ANDROID: xt_quota2: remove trailing junk which might have a digit in it
UPSTREAM: netfilter: x_tables: fix pointer leaks to userspace
Linux 4.4.281
ovl: prevent private clone if bind mount is not allowed
net: xilinx_emaclite: Do not print real IOMEM pointer
USB:ehci:fix Kunpeng920 ehci hardware problem
pipe: increase minimum default pipe size to 2 pages
net/qla3xxx: fix schedule while atomic in ql_wait_for_drvr_lock and ql_adapter_reset
alpha: Send stop IPI to send to online CPUs
reiserfs: check directory items on read from disk
reiserfs: add check for root_inode in reiserfs_fill_super
pcmcia: i82092: fix a null pointer dereference bug
MIPS: Malta: Do not byte-swap accesses to the CBUS UART
serial: 8250: Mask out floating 16/32-bit bus bits
media: rtl28xxu: fix zero-length control request
scripts/tracing: fix the bug that can't parse raw_trace_func
USB: serial: ftdi_sio: add device ID for Auto-M3 OP-COM v2
USB: serial: ch341: fix character loss at high transfer rates
USB: serial: option: add Telit FD980 composition 0x1056
Bluetooth: defer cleanup of resources in hci_unregister_dev()
net: vxge: fix use-after-free in vxge_device_unregister
net: pegasus: fix uninit-value in get_interrupt_interval
bnx2x: fix an error code in bnx2x_nic_load()
mips: Fix non-POSIX regexp
net: natsemi: Fix missing pci_disable_device() in probe and remove
media: videobuf2-core: dequeue if start_streaming fails
scsi: sr: Return correct event when media event code is 3
ALSA: seq: Fix racy deletion of subscriber
Linux 4.4.280
rcu: Update documentation of rcu_read_unlock()
futex,rt_mutex: Fix rt_mutex_cleanup_proxy_lock()
futex: Avoid freeing an active timer
futex: Handle transient "ownerless" rtmutex state correctly
rtmutex: Make wait_lock irq safe
futex: Futex_unlock_pi() determinism
futex: Rework futex_lock_pi() to use rt_mutex_*_proxy_lock()
futex: Pull rt_mutex_futex_unlock() out from under hb->lock
futex,rt_mutex: Introduce rt_mutex_init_waiter()
futex: Cleanup refcounting
futex: Rename free_pi_state() to put_pi_state()
Linux 4.4.279
can: raw: raw_setsockopt(): fix raw_rcv panic for sock UAF
Revert "Bluetooth: Shutdown controller after workqueues are flushed or cancelled"
net: Fix zero-copy head len calculation.
r8152: Fix potential PM refcount imbalance
regulator: rt5033: Fix n_voltages settings for BUCK and LDO
btrfs: mark compressed range uptodate only if all bio succeed
Conflicts:
net/bluetooth/hci_core.c
net/netfilter/xt_quota2.c
Change-Id: I66e2384c8cc40448a7bff34bb935c74e6103e924
|
| | |\|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Changes in 4.4.283
can: usb: esd_usb2: esd_usb2_rx_event(): fix the interchange of the CAN RX and TX error counters
Revert "USB: serial: ch341: fix character loss at high transfer rates"
USB: serial: option: add new VID/PID to support Fibocom FG150
e1000e: Fix the max snoop/no-snoop latency for 10M
net: marvell: fix MVNETA_TX_IN_PRGRS bit number
virtio: Improve vq->broken access to avoid any compiler optimization
vringh: Use wiov->used to check for read/write desc order
vt_kdsetmode: extend console locking
fbmem: add margin check to fb_check_caps()
Revert "floppy: reintroduce O_NDELAY fix"
Linux 4.4.283
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I327e81b91a74a7dff9e1cfb71a7d833ff5f034ff
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 2829a4e3cf3a6ac2fa3cdb681b37574630fb9c1a upstream.
Fibocom FG150 is a 5G module based on Qualcomm SDX55 platform,
support Sub-6G band.
Here are the outputs of lsusb -v and usb-devices:
> T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0
> D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
> P: Vendor=2cb7 ProdID=010b Rev=04.14
> S: Manufacturer=Fibocom
> S: Product=Fibocom Modem_SN:XXXXXXXX
> S: SerialNumber=XXXXXXXX
> C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA
> I: If#=0x0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
> I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
> I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
> I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
> Bus 002 Device 002: ID 2cb7:010b Fibocom Fibocom Modem_SN:XXXXXXXX
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 3.20
> bDeviceClass 0
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 9
> idVendor 0x2cb7 Fibocom
> idProduct 0x010b
> bcdDevice 4.14
> iManufacturer 1 Fibocom
> iProduct 2 Fibocom Modem_SN:XXXXXXXX
> iSerial 3 XXXXXXXX
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 0x00e6
> bNumInterfaces 5
> bConfigurationValue 1
> iConfiguration 4 RNDIS_DUN_DIAG_ADB
> bmAttributes 0xa0
> (Bus Powered)
> Remote Wakeup
> MaxPower 896mA
> Interface Association:
> bLength 8
> bDescriptorType 11
> bFirstInterface 0
> bInterfaceCount 2
> bFunctionClass 239 Miscellaneous Device
> bFunctionSubClass 4
> bFunctionProtocol 1
> iFunction 7 RNDIS
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 239 Miscellaneous Device
> bInterfaceSubClass 4
> bInterfaceProtocol 1
> iInterface 0
> ** UNRECOGNIZED: 05 24 00 10 01
> ** UNRECOGNIZED: 05 24 01 00 01
> ** UNRECOGNIZED: 04 24 02 00
> ** UNRECOGNIZED: 05 24 06 00 01
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0008 1x 8 bytes
> bInterval 9
> bMaxBurst 0
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 1
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 10 CDC Data
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x8e EP 14 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 6
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x0f EP 15 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 6
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 2
> bAlternateSetting 0
> bNumEndpoints 3
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 0
> ** UNRECOGNIZED: 05 24 00 10 01
> ** UNRECOGNIZED: 05 24 01 00 00
> ** UNRECOGNIZED: 04 24 02 02
> ** UNRECOGNIZED: 05 24 06 00 00
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x83 EP 3 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x000a 1x 10 bytes
> bInterval 9
> bMaxBurst 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x82 EP 2 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x01 EP 1 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 0
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 3
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 255 Vendor Specific Subclass
> bInterfaceProtocol 48
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x84 EP 4 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x02 EP 2 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 0
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 4
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 66
> bInterfaceProtocol 1
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x03 EP 3 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x85 EP 5 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0400 1x 1024 bytes
> bInterval 0
> bMaxBurst 0
> Binary Object Store Descriptor:
> bLength 5
> bDescriptorType 15
> wTotalLength 0x0016
> bNumDeviceCaps 2
> USB 2.0 Extension Device Capability:
> bLength 7
> bDescriptorType 16
> bDevCapabilityType 2
> bmAttributes 0x00000006
> BESL Link Power Management (LPM) Supported
> SuperSpeed USB Device Capability:
> bLength 10
> bDescriptorType 16
> bDevCapabilityType 3
> bmAttributes 0x00
> wSpeedsSupported 0x000f
> Device can operate at Low Speed (1Mbps)
> Device can operate at Full Speed (12Mbps)
> Device can operate at High Speed (480Mbps)
> Device can operate at SuperSpeed (5Gbps)
> bFunctionalitySupport 1
> Lowest fully-functional device speed is Full Speed (12Mbps)
> bU1DevExitLat 1 micro seconds
> bU2DevExitLat 500 micro seconds
> Device Status: 0x0000
> (Bus Powered)
Signed-off-by: Zhengjun Zhang <zhangzhengjun@aicrobo.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit df7b16d1c00ecb3da3a30c999cdb39f273c99a2f upstream.
This reverts commit 3c18e9baee0ef97510dcda78c82285f52626764b.
These devices do not appear to send a zero-length packet when the
transfer size is a multiple of the bulk-endpoint max-packet size. This
means that incoming data may not be processed by the driver until a
short packet is received or the receive buffer is full.
Revert back to using endpoint-sized receive buffers to avoid stalled
reads.
Reported-by: Paul Größel <pb.g@gmx.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214131
Fixes: 3c18e9baee0e ("USB: serial: ch341: fix character loss at high transfer rates")
Cc: stable@vger.kernel.org
Cc: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20210824121926.19311-1-johan@kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | |\|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Changes in 4.4.281
ALSA: seq: Fix racy deletion of subscriber
scsi: sr: Return correct event when media event code is 3
media: videobuf2-core: dequeue if start_streaming fails
net: natsemi: Fix missing pci_disable_device() in probe and remove
mips: Fix non-POSIX regexp
bnx2x: fix an error code in bnx2x_nic_load()
net: pegasus: fix uninit-value in get_interrupt_interval
net: vxge: fix use-after-free in vxge_device_unregister
Bluetooth: defer cleanup of resources in hci_unregister_dev()
USB: serial: option: add Telit FD980 composition 0x1056
USB: serial: ch341: fix character loss at high transfer rates
USB: serial: ftdi_sio: add device ID for Auto-M3 OP-COM v2
scripts/tracing: fix the bug that can't parse raw_trace_func
media: rtl28xxu: fix zero-length control request
serial: 8250: Mask out floating 16/32-bit bus bits
MIPS: Malta: Do not byte-swap accesses to the CBUS UART
pcmcia: i82092: fix a null pointer dereference bug
reiserfs: add check for root_inode in reiserfs_fill_super
reiserfs: check directory items on read from disk
alpha: Send stop IPI to send to online CPUs
net/qla3xxx: fix schedule while atomic in ql_wait_for_drvr_lock and ql_adapter_reset
pipe: increase minimum default pipe size to 2 pages
USB:ehci:fix Kunpeng920 ehci hardware problem
net: xilinx_emaclite: Do not print real IOMEM pointer
ovl: prevent private clone if bind mount is not allowed
Linux 4.4.281
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I23014eec5c0648b030387cc4469a1cdfaa2c14a1
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 26b75952ca0b8b4b3050adb9582c8e2f44d49687 upstream.
Kunpeng920's EHCI controller does not have SBRN register.
Reading the SBRN register when the controller driver is
initialized will get 0.
When rebooting the EHCI driver, ehci_shutdown() will be called.
if the sbrn flag is 0, ehci_shutdown() will return directly.
The sbrn flag being 0 will cause the EHCI interrupt signal to
not be turned off after reboot. this interrupt that is not closed
will cause an exception to the device sharing the interrupt.
Therefore, the EHCI controller of Kunpeng920 needs to skip
the read operation of the SBRN register.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/1617958081-17999-1-git-send-email-liulongfang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 8da0e55c7988ef9f08a708c38e5c75ecd8862cf8 upstream.
The Auto-M3 OP-COM v2 is a OBD diagnostic device using a FTD232 for the
USB connection.
Signed-off-by: David Bauer <mail@david-bauer.net>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 3c18e9baee0ef97510dcda78c82285f52626764b upstream.
The chip supports high transfer rates, but with the small default buffers
(64 bytes read), some entire blocks are regularly lost. This typically
happens at 1.5 Mbps (which is the default speed on Rockchip devices) when
used as a console to access U-Boot where the output of the "help" command
misses many lines and where "printenv" mangles the environment.
The FTDI driver doesn't suffer at all from this. One difference is that
it uses 512 bytes rx buffers and 256 bytes tx buffers. Adopting these
values completely resolved the issue, even the output of "dmesg" is
reliable. I preferred to leave the Tx value unchanged as it is not
involved in this issue, while a change could increase the risk of
triggering the same issue with other devices having too small buffers.
I verified that it backports well (and works) at least to 5.4. It's of
low importance enough to be dropped where it doesn't trivially apply
anymore.
Cc: stable@vger.kernel.org
Signed-off-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20210724152739.18726-1-w@1wt.eu
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 5648c073c33d33a0a19d0cb1194a4eb88efe2b71 upstream.
Add the following Telit FD980 composition 0x1056:
Cfg #1: mass storage
Cfg #2: rndis, tty, adb, tty, tty, tty, tty
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20210803194711.3036-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| |\| |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
https://android.googlesource.com/kernel/common into lineage-18.1-caf-msm8998
# By Pavel Skripkin (6) and others
# Via Greg Kroah-Hartman
* android-4.4-p:
Linux 4.4.278
sis900: Fix missing pci_disable_device() in probe and remove
tulip: windbond-840: Fix missing pci_disable_device() in probe and remove
net: llc: fix skb_over_panic
mlx4: Fix missing error code in mlx4_load_one()
tipc: fix sleeping in tipc accept routine
netfilter: nft_nat: allow to specify layer 4 protocol NAT only
cfg80211: Fix possible memory leak in function cfg80211_bss_update
x86/asm: Ensure asm/proto.h can be included stand-alone
NIU: fix incorrect error return, missed in previous revert
can: esd_usb2: fix memory leak
can: ems_usb: fix memory leak
can: usb_8dev: fix memory leak
ocfs2: issue zeroout to EOF blocks
ocfs2: fix zero out valid data
ARM: ensure the signal page contains defined contents
lib/string.c: add multibyte memset functions
ARM: dts: versatile: Fix up interrupt controller node names
hfs: add lock nesting notation to hfs_find_init
hfs: fix high memory mapping in hfs_bnode_read
hfs: add missing clean-up in hfs_fill_super
sctp: move 198 addresses from unusable to private scope
net/802/garp: fix memleak in garp_request_join()
net/802/mrp: fix memleak in mrp_request_join()
workqueue: fix UAF in pwq_unbound_release_workfn()
af_unix: fix garbage collect vs MSG_PEEK
net: split out functions related to registering inflight socket files
Linux 4.4.277
btrfs: compression: don't try to compress if we don't have enough pages
iio: accel: bma180: Fix BMA25x bandwidth register values
iio: accel: bma180: Use explicit member assignment
net: bcmgenet: ensure EXT_ENERGY_DET_MASK is clear
media: ngene: Fix out-of-bounds bug in ngene_command_config_free_buf()
tracing: Fix bug in rb_per_cpu_empty() that might cause deadloop.
USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick
USB: serial: cp210x: fix comments for GE CS1000
USB: serial: option: add support for u-blox LARA-R6 family
usb: renesas_usbhs: Fix superfluous irqs happen after usb_pkt_pop()
usb: max-3421: Prevent corruption of freed memory
USB: usb-storage: Add LaCie Rugged USB3-FW to IGNORE_UAS
usb: hub: Disable USB 3 device initiated lpm if exit latency is too high
KVM: PPC: Book3S: Fix H_RTAS rets buffer overflow
xhci: Fix lost USB 2 remote wake
ALSA: sb: Fix potential ABBA deadlock in CSP driver
s390/ftrace: fix ftrace_update_ftrace_func implementation
proc: Avoid mixing integer types in mem_rw()
Revert "USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem"
scsi: target: Fix protect handling in WRITE SAME(32)
scsi: iscsi: Fix iface sysfs attr detection
netrom: Decrease sock refcount when sock timers expire
net: decnet: Fix sleeping inside in af_decnet
net: fix uninit-value in caif_seqpkt_sendmsg
s390/bpf: Perform r1 range checking before accessing jit->seen_reg[r1]
perf probe-file: Delete namelist in del_events() on the error path
perf test bpf: Free obj_buf
igb: Check if num of q_vectors is smaller than max before array access
iavf: Fix an error handling path in 'iavf_probe()'
ipv6: tcp: drop silly ICMPv6 packet too big messages
tcp: annotate data races around tp->mtu_info
net: validate lwtstate->data before returning from skb_tunnel_info()
net: ti: fix UAF in tlan_remove_one
net: moxa: fix UAF in moxart_mac_probe
net: bcmgenet: Ensure all TX/RX queues DMAs are disabled
net: ipv6: fix return value of ip6_skb_dst_mtu
x86/fpu: Make init_fpstate correct with optimized XSAVE
Revert "memory: fsl_ifc: fix leak of IO mapping on probe failure"
sched/fair: Fix CFS bandwidth hrtimer expiry type
scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8
kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set
thermal/core: Correct function name thermal_zone_device_unregister()
ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_info
ARM: dts: imx6: phyFLEX: Fix UART hardware flow control
ARM: dts: BCM63xx: Fix NAND nodes names
ARM: brcmstb: dts: fix NAND nodes names
Change-Id: Id59b93b8704270f45923f262facbadde4c486a15
|
| | |\|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Changes in 4.4.277
ARM: brcmstb: dts: fix NAND nodes names
ARM: dts: BCM63xx: Fix NAND nodes names
ARM: dts: imx6: phyFLEX: Fix UART hardware flow control
ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_info
thermal/core: Correct function name thermal_zone_device_unregister()
kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set
scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8
sched/fair: Fix CFS bandwidth hrtimer expiry type
Revert "memory: fsl_ifc: fix leak of IO mapping on probe failure"
x86/fpu: Make init_fpstate correct with optimized XSAVE
net: ipv6: fix return value of ip6_skb_dst_mtu
net: bcmgenet: Ensure all TX/RX queues DMAs are disabled
net: moxa: fix UAF in moxart_mac_probe
net: ti: fix UAF in tlan_remove_one
net: validate lwtstate->data before returning from skb_tunnel_info()
tcp: annotate data races around tp->mtu_info
ipv6: tcp: drop silly ICMPv6 packet too big messages
iavf: Fix an error handling path in 'iavf_probe()'
igb: Check if num of q_vectors is smaller than max before array access
perf test bpf: Free obj_buf
perf probe-file: Delete namelist in del_events() on the error path
s390/bpf: Perform r1 range checking before accessing jit->seen_reg[r1]
net: fix uninit-value in caif_seqpkt_sendmsg
net: decnet: Fix sleeping inside in af_decnet
netrom: Decrease sock refcount when sock timers expire
scsi: iscsi: Fix iface sysfs attr detection
scsi: target: Fix protect handling in WRITE SAME(32)
Revert "USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem"
proc: Avoid mixing integer types in mem_rw()
s390/ftrace: fix ftrace_update_ftrace_func implementation
ALSA: sb: Fix potential ABBA deadlock in CSP driver
xhci: Fix lost USB 2 remote wake
KVM: PPC: Book3S: Fix H_RTAS rets buffer overflow
usb: hub: Disable USB 3 device initiated lpm if exit latency is too high
USB: usb-storage: Add LaCie Rugged USB3-FW to IGNORE_UAS
usb: max-3421: Prevent corruption of freed memory
usb: renesas_usbhs: Fix superfluous irqs happen after usb_pkt_pop()
USB: serial: option: add support for u-blox LARA-R6 family
USB: serial: cp210x: fix comments for GE CS1000
USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick
tracing: Fix bug in rb_per_cpu_empty() that might cause deadloop.
media: ngene: Fix out-of-bounds bug in ngene_command_config_free_buf()
net: bcmgenet: ensure EXT_ENERGY_DET_MASK is clear
iio: accel: bma180: Use explicit member assignment
iio: accel: bma180: Fix BMA25x bandwidth register values
btrfs: compression: don't try to compress if we don't have enough pages
Linux 4.4.277
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I7159a9fb5545e504222fcee566c6661c1070c8f7
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit d6a206e60124a9759dd7f6dfb86b0e1d3b1df82e upstream.
Add the USB serial device ID for the CEL ZigBee EM3588 radio stick.
Signed-off-by: John Keeping <john@metanate.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit e9db418d4b828dd049caaf5ed65dc86f93bb1a0c upstream.
Fix comments for GE CS1000 CP210x USB ID assignments.
Fixes: 42213a0190b5 ("USB: serial: cp210x: add some more GE USB IDs")
Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 94b619a07655805a1622484967754f5848640456 upstream.
The patch is meant to support LARA-R6 Cat 1 module family.
Module USB ID:
Vendor ID: 0x05c6
Product ID: 0x90fA
Interface layout:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: QMI wwan (not available in all versions)
Signed-off-by: Marco De Marco <marco.demarco@posteo.net>
Link: https://lore.kernel.org/r/49260184.kfMIbaSn9k@mars
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 5719df243e118fb343725e8b2afb1637e1af1373 upstream.
This driver has a potential issue which this driver is possible to
cause superfluous irqs after usb_pkt_pop() is called. So, after
the commit 3af32605289e ("usb: renesas_usbhs: fix error return
code of usbhsf_pkt_handler()") had been applied, we could observe
the following error happened when we used g_audio.
renesas_usbhs e6590000.usb: irq_ready run_error 1 : -22
To fix the issue, disable the tx or rx interrupt in usb_pkt_pop().
Fixes: 2743e7f90dc0 ("usb: renesas_usbhs: fix the usb_pkt_pop()")
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210624122039.596528-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit b5fdf5c6e6bee35837e160c00ac89327bdad031b upstream.
The MAX-3421 USB driver remembers the state of the USB toggles for a
device/endpoint. To save SPI writes, this was only done when a new
device/endpoint was being used. Unfortunately, if the old device was
removed, this would cause writes to freed memory.
To fix this, a simpler scheme is used. The toggles are read from
hardware when a URB is completed, and the toggles are always written to
hardware when any URB transaction is started. This will cause a few more
SPI transactions, but no causes kernel panics.
Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20210625031456.8632-1-mark.tomlinson@alliedtelesis.co.nz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
