| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| |\ \ \ \ \ \ |
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
xHCI specs revision 1.1 mentions that if Compliance Transition
Capability (CTC) flag is set, then xHC supports software control
of the transition to Compliance mode. For this, we need to write
a value of 10 to Port Link State(PLS) field of PORTSC register
during dwc3_otg_start_host time after the xhci platform device
has been added. Then the link transitions to compliance state
on detection of first LFPS timeout.
Steps to enable compliance transition:
1. Do not connect host cable
2. echo y > /sys/devices/soc/a800000.ssusb/xhci_link_compliance
3. Connect host cable with breakout fixture and start testing
Steps to disable compliance transition:
1. Disconnect the host cable
2. echo n > /sys/devices/soc/a800000.ssusb/xhci_link_compliance
3. Connect host cable
Change-Id: I73225ccad105414d3ebd60f95138b9ecf65005d4
Signed-off-by: Ajay Agarwal <ajaya@codeaurora.org>
|
| |\ \ \ \ \ \ \ |
|
| | | |_|/ / / /
| |/| | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Driver needs to pass qdss data received from mdm qdss
bridge driver to host PC. This requires a software data
path using IN endpoint. Bridge driver needs to open
qdss_mdm channel and use exported write() API to pass
the qdss data received from mdm. Driver calls the notify
call back upon write completion.
Change-Id: I4d8ceaed0bf9c85aa17d3f49503cd690917cc117
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
There is a possibility of PMI detecting SDP as a floating charger
when connected to a PC. Workaround this issue by starting peripheral
stack for floating charger as well. Stop peripheral stack after 10 sec
in absence of USB device enumeration.
Change-Id: I6effee71affbe0baeb28c54ce799ade79ec4b42a
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
|
| |/ / / / / /
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
There is a possibility of PMI detecting SDP as a floating charger
when connected to a PC. Workaround this issue by starting peripheral
stack for floating charger as well. After 10 sec check for USB device
enumeration using gadget USB state. If device is indeed connected to
SDP gadget usb state will be USB_STATE_DEFAULT or higher. This change
also helps to start peripheral stack in super speed usb compliance mode
when D+ and D- lines are floating.
Change-Id: Ia6dc668c549dca35e3273ece9a43be52c25d40ad
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
|
| |\ \ \ \ \ \
| |/ / / / /
|/| | | | | |
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
The PD specification defines tFirstSourceCap as the time before
a source must send its first Source_Capabilities message and
allows this to be up to 250ms. This is advantageous for cases
in which a sink partner is quickly detached (or possibly even
attempting Try.SRC) just after VBUS is turned on and the
unnecessary PD messaging causes the HW to fail to detect the
detach condition right away. Add a delay of 200ms during the
transition from PE_SRC_STARTUP to PE_SRC_SEND_CAPABILITIES.
Change-Id: I13dd31d71b8b93adadb70b113cba28ce5aed6e4e
Signed-off-by: Jack Pham <jackp@codeaurora.org>
|
| |\ \ \ \ \ \ |
|
| | |/ / / / /
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Currently driver is enabling autoresume feature even if no device is
connected which is not required. Hence enable auto resume only when
any HS/FS/LS devices are connected during bus suspend.
Change-Id: Id02a357597dde64fe4026ccaacf73bf3abd4b565
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
|
| |\ \ \ \ \ \
| |/ / / / /
|/| | | | | |
|
| | |\ \ \ \ \
| | | |/ / /
| | |/| | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
* refs/heads/tmp-8c91412:
Linux 4.4.75
nvme: apply DELAY_BEFORE_CHK_RDY quirk at probe time too
nvme/quirk: Add a delay before checking for adapter readiness
net: phy: fix marvell phy status reading
net: phy: Initialize mdio clock at probe function
usb: gadget: f_fs: avoid out of bounds access on comp_desc
powerpc/slb: Force a full SLB flush when we insert for a bad EA
mtd: spi-nor: fix spansion quad enable
of: Add check to of_scan_flat_dt() before accessing initial_boot_params
rxrpc: Fix several cases where a padded len isn't checked in ticket decode
USB: usbip: fix nonconforming hub descriptor
drm/amdgpu: adjust default display clock
drm/amdgpu/atom: fix ps allocation size for EnableDispPowerGating
drm/radeon: add a quirk for Toshiba Satellite L20-183
drm/radeon: add a PX quirk for another K53TK variant
iscsi-target: Reject immediate data underflow larger than SCSI transfer length
target: Fix kref->refcount underflow in transport_cmd_finish_abort
time: Fix clock->read(clock) race around clocksource changes
Input: i8042 - add Fujitsu Lifebook AH544 to notimeout list
powerpc/kprobes: Pause function_graph tracing during jprobes handling
signal: Only reschedule timers on signals timers have sent
HID: Add quirk for Dell PIXART OEM mouse
CIFS: Improve readdir verbosity
KVM: PPC: Book3S HV: Preserve userspace HTM state properly
lib/cmdline.c: fix get_options() overflow while parsing ranges
autofs: sanity check status reported with AUTOFS_DEV_IOCTL_FAIL
fs/exec.c: account for argv/envp pointers
UPSTREAM: drivers/perf: arm-pmu: fix RCU usage on pmu resume from low-power
UPSTREAM: drivers/perf: arm_pmu: implement CPU_PM notifier
ANDROID: squashfs: Fix endianness issue
ANDROID: squashfs: Fix signed division issue
Change-Id: Iabe0921dd7b9a582f5237235338ef0f730de7edb
Signed-off-by: Blagovest Kolenichev <bkolenichev@codeaurora.org>
|
| | | |\ \ \ \
| | | | |/ /
| | | |/| |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Changes in 4.4.75
fs/exec.c: account for argv/envp pointers
autofs: sanity check status reported with AUTOFS_DEV_IOCTL_FAIL
lib/cmdline.c: fix get_options() overflow while parsing ranges
KVM: PPC: Book3S HV: Preserve userspace HTM state properly
CIFS: Improve readdir verbosity
HID: Add quirk for Dell PIXART OEM mouse
signal: Only reschedule timers on signals timers have sent
powerpc/kprobes: Pause function_graph tracing during jprobes handling
Input: i8042 - add Fujitsu Lifebook AH544 to notimeout list
time: Fix clock->read(clock) race around clocksource changes
target: Fix kref->refcount underflow in transport_cmd_finish_abort
iscsi-target: Reject immediate data underflow larger than SCSI transfer length
drm/radeon: add a PX quirk for another K53TK variant
drm/radeon: add a quirk for Toshiba Satellite L20-183
drm/amdgpu/atom: fix ps allocation size for EnableDispPowerGating
drm/amdgpu: adjust default display clock
USB: usbip: fix nonconforming hub descriptor
rxrpc: Fix several cases where a padded len isn't checked in ticket decode
of: Add check to of_scan_flat_dt() before accessing initial_boot_params
mtd: spi-nor: fix spansion quad enable
powerpc/slb: Force a full SLB flush when we insert for a bad EA
usb: gadget: f_fs: avoid out of bounds access on comp_desc
net: phy: Initialize mdio clock at probe function
net: phy: fix marvell phy status reading
nvme/quirk: Add a delay before checking for adapter readiness
nvme: apply DELAY_BEFORE_CHK_RDY quirk at probe time too
Linux 4.4.75
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
commit b7f73850bb4fac1e2209a4dd5e636d39be92f42c upstream.
Companion descriptor is only used for SuperSpeed endpoints,
if the endpoints are HighSpeed or FullSpeed, the Companion
descriptor will not allocated, so we can only access it if
gadget is SuperSpeed.
I can reproduce this issue on Rockchip platform rk3368 SoC
which supports USB 2.0, and use functionfs for ADB. Kernel
build with CONFIG_KASAN=y and CONFIG_SLUB_DEBUG=y report
the following BUG:
==================================================================
BUG: KASAN: slab-out-of-bounds in ffs_func_set_alt+0x224/0x3a0 at addr ffffffc0601f6509
Read of size 1 by task swapper/0/0
============================================================================
BUG kmalloc-256 (Not tainted): kasan: bad access detected
----------------------------------------------------------------------------
Disabling lock debugging due to kernel taint
INFO: Allocated in ffs_func_bind+0x52c/0x99c age=1275 cpu=0 pid=1
alloc_debug_processing+0x128/0x17c
___slab_alloc.constprop.58+0x50c/0x610
__slab_alloc.isra.55.constprop.57+0x24/0x34
__kmalloc+0xe0/0x250
ffs_func_bind+0x52c/0x99c
usb_add_function+0xd8/0x1d4
configfs_composite_bind+0x48c/0x570
udc_bind_to_driver+0x6c/0x170
usb_udc_attach_driver+0xa4/0xd0
gadget_dev_desc_UDC_store+0xcc/0x118
configfs_write_file+0x1a0/0x1f8
__vfs_write+0x64/0x174
vfs_write+0xe4/0x200
SyS_write+0x68/0xc8
el0_svc_naked+0x24/0x28
INFO: Freed in inode_doinit_with_dentry+0x3f0/0x7c4 age=1275 cpu=7 pid=247
...
Call trace:
[<ffffff900808aab4>] dump_backtrace+0x0/0x230
[<ffffff900808acf8>] show_stack+0x14/0x1c
[<ffffff90084ad420>] dump_stack+0xa0/0xc8
[<ffffff90082157cc>] print_trailer+0x188/0x198
[<ffffff9008215948>] object_err+0x3c/0x4c
[<ffffff900821b5ac>] kasan_report+0x324/0x4dc
[<ffffff900821aa38>] __asan_load1+0x24/0x50
[<ffffff90089eb750>] ffs_func_set_alt+0x224/0x3a0
[<ffffff90089d3760>] composite_setup+0xdcc/0x1ac8
[<ffffff90089d7394>] android_setup+0x124/0x1a0
[<ffffff90089acd18>] _setup+0x54/0x74
[<ffffff90089b6b98>] handle_ep0+0x3288/0x4390
[<ffffff90089b9b44>] dwc_otg_pcd_handle_out_ep_intr+0x14dc/0x2ae4
[<ffffff90089be85c>] dwc_otg_pcd_handle_intr+0x1ec/0x298
[<ffffff90089ad680>] dwc_otg_pcd_irq+0x10/0x20
[<ffffff9008116328>] handle_irq_event_percpu+0x124/0x3ac
[<ffffff9008116610>] handle_irq_event+0x60/0xa0
[<ffffff900811af30>] handle_fasteoi_irq+0x10c/0x1d4
[<ffffff9008115568>] generic_handle_irq+0x30/0x40
[<ffffff90081159b4>] __handle_domain_irq+0xac/0xdc
[<ffffff9008080e9c>] gic_handle_irq+0x64/0xa4
...
Memory state around the buggy address:
ffffffc0601f6400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffffffc0601f6480: 00 00 00 00 00 00 00 00 00 00 06 fc fc fc fc fc
>ffffffc0601f6500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffffffc0601f6580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffffc0601f6600: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00
==================================================================
Signed-off-by: William Wu <william.wu@rock-chips.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Jerry Zhang <zhangjerry@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
commit ec963b412a54aac8e527708ecad06a6988a86fb4 upstream.
Fix up the root-hub descriptor to accommodate the variable-length
DeviceRemovable and PortPwrCtrlMask fields, while marking all ports as
removable (and leaving the reserved bit zero unset).
Also add a build-time constraint on VHCI_HC_PORTS which must never be
greater than USB_MAXCHILDREN (but this was only enforced through a
KConfig constant).
This specifically fixes the descriptor layout whenever VHCI_HC_PORTS is
greater than seven (default is 8).
Fixes: 04679b3489e0 ("Staging: USB/IP: add client driver")
Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net>
Cc: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
[ johan: backport to v4.4, which uses VHCI_NPORTS ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| |\ \ \ \ \ \ |
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Currently driver is enabling autoresume feature even if no device is
connected which is not required. Hence enable auto resume only when
any HS/FS/LS devices are connected during bus suspend.
Change-Id: I8150a571e11ccc128298fe75acef21ffe9b08a9a
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
|
| |\ \ \ \ \ \ \
| | |/ / / / /
| |/| | | | | |
|
| | |\ \ \ \ \ \
| | | |/ / / /
| | |/| | / /
| | |_|_|/ /
| |/| | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
* refs/heads/tmp-77ddb50:
UPSTREAM: usb: gadget: f_fs: avoid out of bounds access on comp_desc
Linux 4.4.74
mm: fix new crash in unmapped_area_topdown()
Allow stack to grow up to address space limit
mm: larger stack guard gap, between vmas
alarmtimer: Rate limit periodic intervals
MIPS: Fix bnezc/jialc return address calculation
usb: dwc3: exynos fix axius clock error path to do cleanup
alarmtimer: Prevent overflow of relative timers
genirq: Release resources in __setup_irq() error path
swap: cond_resched in swap_cgroup_prepare()
mm/memory-failure.c: use compound_head() flags for huge pages
USB: gadgetfs, dummy-hcd, net2280: fix locking for callbacks
usb: xhci: ASMedia ASM1042A chipset need shorts TX quirk
drivers/misc/c2port/c2port-duramar2150.c: checking for NULL instead of IS_ERR()
usb: r8a66597-hcd: decrease timeout
usb: r8a66597-hcd: select a different endpoint on timeout
USB: gadget: dummy_hcd: fix hub-descriptor removable fields
pvrusb2: reduce stack usage pvr2_eeprom_analyze()
usb: core: fix potential memory leak in error path during hcd creation
USB: hub: fix SS max number of ports
iio: proximity: as3935: recalibrate RCO after resume
staging: rtl8188eu: prevent an underflow in rtw_check_beacon_data()
mfd: omap-usb-tll: Fix inverted bit use for USB TLL mode
x86/mm/32: Set the '__vmalloc_start_set' flag in initmem_init()
serial: efm32: Fix parity management in 'efm32_uart_console_get_options()'
mac80211: fix IBSS presp allocation size
mac80211: fix CSA in IBSS mode
mac80211/wpa: use constant time memory comparison for MACs
mac80211: don't look at the PM bit of BAR frames
vb2: Fix an off by one error in 'vb2_plane_vaddr'
cpufreq: conservative: Allow down_threshold to take values from 1 to 10
can: gs_usb: fix memory leak in gs_cmd_reset()
configfs: Fix race between create_link and configfs_rmdir
UPSTREAM: bpf: don't let ldimm64 leak map addresses on unprivileged
BACKPORT: ext4: fix data exposure after a crash
ANDROID: sdcardfs: remove dead function open_flags_to_access_mode()
ANDROID: android-base.cfg: split out arm64-specific configs
Linux 4.4.73
sparc64: make string buffers large enough
s390/kvm: do not rely on the ILC on kvm host protection fauls
xtensa: don't use linux IRQ #0
tipc: ignore requests when the connection state is not CONNECTED
proc: add a schedule point in proc_pid_readdir()
romfs: use different way to generate fsid for BLOCK or MTD
sctp: sctp_addr_id2transport should verify the addr before looking up assoc
r8152: avoid start_xmit to schedule napi when napi is disabled
r8152: fix rtl8152_post_reset function
r8152: re-schedule napi for tx
nfs: Fix "Don't increment lock sequence ID after NFS4ERR_MOVED"
ravb: unmap descriptors when freeing rings
drm/ast: Fixed system hanged if disable P2A
drm/nouveau: Don't enabling polling twice on runtime resume
parisc, parport_gsc: Fixes for printk continuation lines
net: adaptec: starfire: add checks for dma mapping errors
pinctrl: berlin-bg4ct: fix the value for "sd1a" of pin SCRD0_CRD_PRES
gianfar: synchronize DMA API usage by free_skb_rx_queue w/ gfar_new_page
net/mlx4_core: Avoid command timeouts during VF driver device shutdown
drm/nouveau/fence/g84-: protect against concurrent access to semaphore buffers
drm/nouveau: prevent userspace from deleting client object
ipv6: fix flow labels when the traffic class is non-0
FS-Cache: Initialise stores_lock in netfs cookie
fscache: Clear outstanding writes when disabling a cookie
fscache: Fix dead object requeue
ethtool: do not vzalloc(0) on registers dump
log2: make order_base_2() behave correctly on const input value zero
kasan: respect /proc/sys/kernel/traceoff_on_warning
jump label: pass kbuild_cflags when checking for asm goto support
PM / runtime: Avoid false-positive warnings from might_sleep_if()
ipv6: Fix IPv6 packet loss in scenarios involving roaming + snooping switches
i2c: piix4: Fix request_region size
sierra_net: Add support for IPv6 and Dual-Stack Link Sense Indications
sierra_net: Skip validating irrelevant fields for IDLE LSIs
net: hns: Fix the device being used for dma mapping during TX
NET: mkiss: Fix panic
NET: Fix /proc/net/arp for AX.25
ipv6: Inhibit IPv4-mapped src address on the wire.
ipv6: Handle IPv4-mapped src to in6addr_any dst.
net: xilinx_emaclite: fix receive buffer overflow
net: xilinx_emaclite: fix freezes due to unordered I/O
Call echo service immediately after socket reconnect
staging: rtl8192e: rtl92e_fill_tx_desc fix write to mapped out memory.
ARM: dts: imx6dl: Fix the VDD_ARM_CAP voltage for 396MHz operation
partitions/msdos: FreeBSD UFS2 file systems are not recognized
s390/vmem: fix identity mapping
usb: gadget: f_fs: Fix possibe deadlock
Conflicts:
drivers/usb/gadget/function/f_fs.c
Change-Id: I23106e9fc2c4f2d0b06acce59b781f6c36487fcc
Signed-off-by: Blagovest Kolenichev <bkolenichev@codeaurora.org>
|
| | | |\ \ \ \
| | | | |/ /
| | | |/| |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Changes in 4.4.74
configfs: Fix race between create_link and configfs_rmdir
can: gs_usb: fix memory leak in gs_cmd_reset()
cpufreq: conservative: Allow down_threshold to take values from 1 to 10
vb2: Fix an off by one error in 'vb2_plane_vaddr'
mac80211: don't look at the PM bit of BAR frames
mac80211/wpa: use constant time memory comparison for MACs
mac80211: fix CSA in IBSS mode
mac80211: fix IBSS presp allocation size
serial: efm32: Fix parity management in 'efm32_uart_console_get_options()'
x86/mm/32: Set the '__vmalloc_start_set' flag in initmem_init()
mfd: omap-usb-tll: Fix inverted bit use for USB TLL mode
staging: rtl8188eu: prevent an underflow in rtw_check_beacon_data()
iio: proximity: as3935: recalibrate RCO after resume
USB: hub: fix SS max number of ports
usb: core: fix potential memory leak in error path during hcd creation
pvrusb2: reduce stack usage pvr2_eeprom_analyze()
USB: gadget: dummy_hcd: fix hub-descriptor removable fields
usb: r8a66597-hcd: select a different endpoint on timeout
usb: r8a66597-hcd: decrease timeout
drivers/misc/c2port/c2port-duramar2150.c: checking for NULL instead of IS_ERR()
usb: xhci: ASMedia ASM1042A chipset need shorts TX quirk
USB: gadgetfs, dummy-hcd, net2280: fix locking for callbacks
mm/memory-failure.c: use compound_head() flags for huge pages
swap: cond_resched in swap_cgroup_prepare()
genirq: Release resources in __setup_irq() error path
alarmtimer: Prevent overflow of relative timers
usb: dwc3: exynos fix axius clock error path to do cleanup
MIPS: Fix bnezc/jialc return address calculation
alarmtimer: Rate limit periodic intervals
mm: larger stack guard gap, between vmas
Allow stack to grow up to address space limit
mm: fix new crash in unmapped_area_topdown()
Linux 4.4.74
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
commit 8ae584d1951f241efd45499f8774fd7066f22823 upstream.
Axius clock error path returns without disabling clock and suspend clock.
Fix it to disable them before returning error.
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
commit f16443a034c7aa359ddf6f0f9bc40d01ca31faea upstream.
Using the syzkaller kernel fuzzer, Andrey Konovalov generated the
following error in gadgetfs:
> BUG: KASAN: use-after-free in __lock_acquire+0x3069/0x3690
> kernel/locking/lockdep.c:3246
> Read of size 8 at addr ffff88003a2bdaf8 by task kworker/3:1/903
>
> CPU: 3 PID: 903 Comm: kworker/3:1 Not tainted 4.12.0-rc4+ #35
> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
> Workqueue: usb_hub_wq hub_event
> Call Trace:
> __dump_stack lib/dump_stack.c:16 [inline]
> dump_stack+0x292/0x395 lib/dump_stack.c:52
> print_address_description+0x78/0x280 mm/kasan/report.c:252
> kasan_report_error mm/kasan/report.c:351 [inline]
> kasan_report+0x230/0x340 mm/kasan/report.c:408
> __asan_report_load8_noabort+0x19/0x20 mm/kasan/report.c:429
> __lock_acquire+0x3069/0x3690 kernel/locking/lockdep.c:3246
> lock_acquire+0x22d/0x560 kernel/locking/lockdep.c:3855
> __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
> _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:151
> spin_lock include/linux/spinlock.h:299 [inline]
> gadgetfs_suspend+0x89/0x130 drivers/usb/gadget/legacy/inode.c:1682
> set_link_state+0x88e/0xae0 drivers/usb/gadget/udc/dummy_hcd.c:455
> dummy_hub_control+0xd7e/0x1fb0 drivers/usb/gadget/udc/dummy_hcd.c:2074
> rh_call_control drivers/usb/core/hcd.c:689 [inline]
> rh_urb_enqueue drivers/usb/core/hcd.c:846 [inline]
> usb_hcd_submit_urb+0x92f/0x20b0 drivers/usb/core/hcd.c:1650
> usb_submit_urb+0x8b2/0x12c0 drivers/usb/core/urb.c:542
> usb_start_wait_urb+0x148/0x5b0 drivers/usb/core/message.c:56
> usb_internal_control_msg drivers/usb/core/message.c:100 [inline]
> usb_control_msg+0x341/0x4d0 drivers/usb/core/message.c:151
> usb_clear_port_feature+0x74/0xa0 drivers/usb/core/hub.c:412
> hub_port_disable+0x123/0x510 drivers/usb/core/hub.c:4177
> hub_port_init+0x1ed/0x2940 drivers/usb/core/hub.c:4648
> hub_port_connect drivers/usb/core/hub.c:4826 [inline]
> hub_port_connect_change drivers/usb/core/hub.c:4999 [inline]
> port_event drivers/usb/core/hub.c:5105 [inline]
> hub_event+0x1ae1/0x3d40 drivers/usb/core/hub.c:5185
> process_one_work+0xc08/0x1bd0 kernel/workqueue.c:2097
> process_scheduled_works kernel/workqueue.c:2157 [inline]
> worker_thread+0xb2b/0x1860 kernel/workqueue.c:2233
> kthread+0x363/0x440 kernel/kthread.c:231
> ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:424
>
> Allocated by task 9958:
> save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59
> save_stack+0x43/0xd0 mm/kasan/kasan.c:513
> set_track mm/kasan/kasan.c:525 [inline]
> kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:617
> kmem_cache_alloc_trace+0x87/0x280 mm/slub.c:2745
> kmalloc include/linux/slab.h:492 [inline]
> kzalloc include/linux/slab.h:665 [inline]
> dev_new drivers/usb/gadget/legacy/inode.c:170 [inline]
> gadgetfs_fill_super+0x24f/0x540 drivers/usb/gadget/legacy/inode.c:1993
> mount_single+0xf6/0x160 fs/super.c:1192
> gadgetfs_mount+0x31/0x40 drivers/usb/gadget/legacy/inode.c:2019
> mount_fs+0x9c/0x2d0 fs/super.c:1223
> vfs_kern_mount.part.25+0xcb/0x490 fs/namespace.c:976
> vfs_kern_mount fs/namespace.c:2509 [inline]
> do_new_mount fs/namespace.c:2512 [inline]
> do_mount+0x41b/0x2d90 fs/namespace.c:2834
> SYSC_mount fs/namespace.c:3050 [inline]
> SyS_mount+0xb0/0x120 fs/namespace.c:3027
> entry_SYSCALL_64_fastpath+0x1f/0xbe
>
> Freed by task 9960:
> save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59
> save_stack+0x43/0xd0 mm/kasan/kasan.c:513
> set_track mm/kasan/kasan.c:525 [inline]
> kasan_slab_free+0x72/0xc0 mm/kasan/kasan.c:590
> slab_free_hook mm/slub.c:1357 [inline]
> slab_free_freelist_hook mm/slub.c:1379 [inline]
> slab_free mm/slub.c:2961 [inline]
> kfree+0xed/0x2b0 mm/slub.c:3882
> put_dev+0x124/0x160 drivers/usb/gadget/legacy/inode.c:163
> gadgetfs_kill_sb+0x33/0x60 drivers/usb/gadget/legacy/inode.c:2027
> deactivate_locked_super+0x8d/0xd0 fs/super.c:309
> deactivate_super+0x21e/0x310 fs/super.c:340
> cleanup_mnt+0xb7/0x150 fs/namespace.c:1112
> __cleanup_mnt+0x1b/0x20 fs/namespace.c:1119
> task_work_run+0x1a0/0x280 kernel/task_work.c:116
> exit_task_work include/linux/task_work.h:21 [inline]
> do_exit+0x18a8/0x2820 kernel/exit.c:878
> do_group_exit+0x14e/0x420 kernel/exit.c:982
> get_signal+0x784/0x1780 kernel/signal.c:2318
> do_signal+0xd7/0x2130 arch/x86/kernel/signal.c:808
> exit_to_usermode_loop+0x1ac/0x240 arch/x86/entry/common.c:157
> prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline]
> syscall_return_slowpath+0x3ba/0x410 arch/x86/entry/common.c:263
> entry_SYSCALL_64_fastpath+0xbc/0xbe
>
> The buggy address belongs to the object at ffff88003a2bdae0
> which belongs to the cache kmalloc-1024 of size 1024
> The buggy address is located 24 bytes inside of
> 1024-byte region [ffff88003a2bdae0, ffff88003a2bdee0)
> The buggy address belongs to the page:
> page:ffffea0000e8ae00 count:1 mapcount:0 mapping: (null)
> index:0x0 compound_mapcount: 0
> flags: 0x100000000008100(slab|head)
> raw: 0100000000008100 0000000000000000 0000000000000000 0000000100170017
> raw: ffffea0000ed3020 ffffea0000f5f820 ffff88003e80efc0 0000000000000000
> page dumped because: kasan: bad access detected
>
> Memory state around the buggy address:
> ffff88003a2bd980: fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
> ffff88003a2bda00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
> >ffff88003a2bda80: fc fc fc fc fc fc fc fc fc fc fc fc fb fb fb fb
> ^
> ffff88003a2bdb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> ffff88003a2bdb80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> ==================================================================
What this means is that the gadgetfs_suspend() routine was trying to
access dev->lock after it had been deallocated. The root cause is a
race in the dummy_hcd driver; the dummy_udc_stop() routine can race
with the rest of the driver because it contains no locking. And even
when proper locking is added, it can still race with the
set_link_state() function because that function incorrectly drops the
private spinlock before invoking any gadget driver callbacks.
The result of this race, as seen above, is that set_link_state() can
invoke a callback in gadgetfs even after gadgetfs has been unbound
from dummy_hcd's UDC and its private data structures have been
deallocated.
include/linux/usb/gadget.h documents that the ->reset, ->disconnect,
->suspend, and ->resume callbacks may be invoked in interrupt context.
In general this is necessary, to prevent races with gadget driver
removal. This patch fixes dummy_hcd to retain the spinlock across
these calls, and it adds a spinlock acquisition to dummy_udc_stop() to
prevent the race.
The net2280 driver makes the same mistake of dropping the private
spinlock for its ->disconnect and ->reset callback invocations. The
patch fixes it too.
Lastly, since gadgetfs_suspend() may be invoked in interrupt context,
it cannot assume that interrupts are enabled when it runs. It must
use spin_lock_irqsave() instead of spin_lock_irq(). The patch fixes
that bug as well.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
commit d2f48f05cd2a2a0a708fbfa45f1a00a87660d937 upstream.
When plugging an USB webcam I see the following message:
[106385.615559] xhci_hcd 0000:04:00.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?
[106390.583860] handle_tx_event: 913 callbacks suppressed
With this patch applied, I get no more printing of this message.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
commit dd14a3e9b92ac6f0918054f9e3477438760a4fa6 upstream.
The timeout for BULK packets was 300ms which is a long time if other
endpoints or devices are waiting for their turn. Changing it to 50ms
greatly increased the overall performance for multi-endpoint devices.
Fixes: 5d3043586db4 ("usb: r8a66597-hcd: host controller driver for R8A6659")
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
commit 1f873d857b6c2fefb4dada952674aa01bcfb92bd upstream.
If multiple endpoints on a single device have pending IN URBs and one
endpoint times out due to NAKs (perfectly legal), select a different
endpoint URB to try.
The existing code only checked to see another device address has pending
URBs and ignores other IN endpoints on the current device address. This
leads to endpoints never getting serviced if one endpoint is using NAK as
a flow control method.
Fixes: 5d3043586db4 ("usb: r8a66597-hcd: host controller driver for R8A6659")
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
commit d81182ce30dbd497a1e7047d7fda2af040347790 upstream.
Flag the first and only port as removable while also leaving the
remaining bits (including the reserved bit zero) unset in accordance
with the specifications:
"Within a byte, if no port exists for a given location, the bit
field representing the port characteristics shall be 0."
Also add a comment marking the legacy PortPwrCtrlMask field.
Fixes: 1cd8fd2887e1 ("usb: gadget: dummy_hcd: add SuperSpeed support")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: Tatyana Brokhman <tlinder@codeaurora.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
commit 1a744d2eb76aaafb997fda004ae3ae62a1538f85 upstream.
Free memory allocated for address0_mutex if allocation of bandwidth_mutex
failed.
Fixes: feb26ac31a2a ("usb: core: hub: hub_port_init lock controller instead of bus")
Signed-off-by: Anton Bondarenko <anton.bondarenko.sama@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
commit 93491ced3c87c94b12220dbac0527e1356702179 upstream.
Add define for the maximum number of ports on a SuperSpeed hub as per
USB 3.1 spec Table 10-5, and use it when verifying the retrieved hub
descriptor.
This specifically avoids benign attempts to update the DeviceRemovable
mask for non-existing ports (should we get that far).
Fixes: dbe79bbe9dcb ("USB 3.0 Hub Changes")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Companion descriptor is only used for SuperSpeed endpoints,
if the endpoints are HighSpeed or FullSpeed, the Companion
descriptor will not allocated, so we can only access it if
gadget is SuperSpeed.
I can reproduce this issue on Rockchip platform rk3368 SoC
which supports USB 2.0, and use functionfs for ADB. Kernel
build with CONFIG_KASAN=y and CONFIG_SLUB_DEBUG=y report
the following BUG:
==================================================================
BUG: KASAN: slab-out-of-bounds in ffs_func_set_alt+0x224/0x3a0 at addr ffffffc0601f6509
Read of size 1 by task swapper/0/0
============================================================================
BUG kmalloc-256 (Not tainted): kasan: bad access detected
----------------------------------------------------------------------------
Disabling lock debugging due to kernel taint
INFO: Allocated in ffs_func_bind+0x52c/0x99c age=1275 cpu=0 pid=1
alloc_debug_processing+0x128/0x17c
___slab_alloc.constprop.58+0x50c/0x610
__slab_alloc.isra.55.constprop.57+0x24/0x34
__kmalloc+0xe0/0x250
ffs_func_bind+0x52c/0x99c
usb_add_function+0xd8/0x1d4
configfs_composite_bind+0x48c/0x570
udc_bind_to_driver+0x6c/0x170
usb_udc_attach_driver+0xa4/0xd0
gadget_dev_desc_UDC_store+0xcc/0x118
configfs_write_file+0x1a0/0x1f8
__vfs_write+0x64/0x174
vfs_write+0xe4/0x200
SyS_write+0x68/0xc8
el0_svc_naked+0x24/0x28
INFO: Freed in inode_doinit_with_dentry+0x3f0/0x7c4 age=1275 cpu=7 pid=247
...
Call trace:
[<ffffff900808aab4>] dump_backtrace+0x0/0x230
[<ffffff900808acf8>] show_stack+0x14/0x1c
[<ffffff90084ad420>] dump_stack+0xa0/0xc8
[<ffffff90082157cc>] print_trailer+0x188/0x198
[<ffffff9008215948>] object_err+0x3c/0x4c
[<ffffff900821b5ac>] kasan_report+0x324/0x4dc
[<ffffff900821aa38>] __asan_load1+0x24/0x50
[<ffffff90089eb750>] ffs_func_set_alt+0x224/0x3a0
[<ffffff90089d3760>] composite_setup+0xdcc/0x1ac8
[<ffffff90089d7394>] android_setup+0x124/0x1a0
[<ffffff90089acd18>] _setup+0x54/0x74
[<ffffff90089b6b98>] handle_ep0+0x3288/0x4390
[<ffffff90089b9b44>] dwc_otg_pcd_handle_out_ep_intr+0x14dc/0x2ae4
[<ffffff90089be85c>] dwc_otg_pcd_handle_intr+0x1ec/0x298
[<ffffff90089ad680>] dwc_otg_pcd_irq+0x10/0x20
[<ffffff9008116328>] handle_irq_event_percpu+0x124/0x3ac
[<ffffff9008116610>] handle_irq_event+0x60/0xa0
[<ffffff900811af30>] handle_fasteoi_irq+0x10c/0x1d4
[<ffffff9008115568>] generic_handle_irq+0x30/0x40
[<ffffff90081159b4>] __handle_domain_irq+0xac/0xdc
[<ffffff9008080e9c>] gic_handle_irq+0x64/0xa4
...
Memory state around the buggy address:
ffffffc0601f6400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffffffc0601f6480: 00 00 00 00 00 00 00 00 00 00 06 fc fc fc fc fc
>ffffffc0601f6500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffffffc0601f6580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffffc0601f6600: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00
==================================================================
Signed-off-by: William Wu <william.wu@rock-chips.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
(cherry picked from commit b7f73850bb4fac1e2209a4dd5e636d39be92f42c)
Signed-off-by: Jerry Zhang <zhangjerry@google.com>
Signed-off-by: Jerry Zhang <zhangjerry@google.com>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
When system try to close /dev/usb-ffs/adb/ep0 on one core, at the same
time another core try to attach new UDC, which will cause deadlock as
below scenario. Thus we should release ffs lock before issuing
unregister_gadget_item().
[ 52.642225] c1 ======================================================
[ 52.642228] c1 [ INFO: possible circular locking dependency detected ]
[ 52.642236] c1 4.4.6+ #1 Tainted: G W O
[ 52.642241] c1 -------------------------------------------------------
[ 52.642245] c1 usb ffs open/2808 is trying to acquire lock:
[ 52.642270] c0 (udc_lock){+.+.+.}, at: [<ffffffc00065aeec>]
usb_gadget_unregister_driver+0x3c/0xc8
[ 52.642272] c1 but task is already holding lock:
[ 52.642283] c0 (ffs_lock){+.+.+.}, at: [<ffffffc00066b244>]
ffs_data_clear+0x30/0x140
[ 52.642285] c1 which lock already depends on the new lock.
[ 52.642287] c1
the existing dependency chain (in reverse order) is:
[ 52.642295] c0
-> #1 (ffs_lock){+.+.+.}:
[ 52.642307] c0 [<ffffffc00012340c>] __lock_acquire+0x20f0/0x2238
[ 52.642314] c0 [<ffffffc000123b54>] lock_acquire+0xe4/0x298
[ 52.642322] c0 [<ffffffc000aaf6e8>] mutex_lock_nested+0x7c/0x3cc
[ 52.642328] c0 [<ffffffc00066f7bc>] ffs_func_bind+0x504/0x6e8
[ 52.642334] c0 [<ffffffc000654004>] usb_add_function+0x84/0x184
[ 52.642340] c0 [<ffffffc000658ca4>] configfs_composite_bind+0x264/0x39c
[ 52.642346] c0 [<ffffffc00065b348>] udc_bind_to_driver+0x58/0x11c
[ 52.642352] c0 [<ffffffc00065b49c>] usb_udc_attach_driver+0x90/0xc8
[ 52.642358] c0 [<ffffffc0006598e0>] gadget_dev_desc_UDC_store+0xd4/0x128
[ 52.642369] c0 [<ffffffc0002c14e8>] configfs_write_file+0xd0/0x13c
[ 52.642376] c0 [<ffffffc00023c054>] vfs_write+0xb8/0x214
[ 52.642381] c0 [<ffffffc00023cad4>] SyS_write+0x54/0xb0
[ 52.642388] c0 [<ffffffc000085ff0>] el0_svc_naked+0x24/0x28
[ 52.642395] c0
-> #0 (udc_lock){+.+.+.}:
[ 52.642401] c0 [<ffffffc00011e3d0>] print_circular_bug+0x84/0x2e4
[ 52.642407] c0 [<ffffffc000123454>] __lock_acquire+0x2138/0x2238
[ 52.642412] c0 [<ffffffc000123b54>] lock_acquire+0xe4/0x298
[ 52.642420] c0 [<ffffffc000aaf6e8>] mutex_lock_nested+0x7c/0x3cc
[ 52.642427] c0 [<ffffffc00065aeec>] usb_gadget_unregister_driver+0x3c/0xc8
[ 52.642432] c0 [<ffffffc00065995c>] unregister_gadget_item+0x28/0x44
[ 52.642439] c0 [<ffffffc00066b34c>] ffs_data_clear+0x138/0x140
[ 52.642444] c0 [<ffffffc00066b374>] ffs_data_reset+0x20/0x6c
[ 52.642450] c0 [<ffffffc00066efd0>] ffs_data_closed+0xac/0x12c
[ 52.642454] c0 [<ffffffc00066f070>] ffs_ep0_release+0x20/0x2c
[ 52.642460] c0 [<ffffffc00023dbe4>] __fput+0xb0/0x1f4
[ 52.642466] c0 [<ffffffc00023dd9c>] ____fput+0x20/0x2c
[ 52.642473] c0 [<ffffffc0000ee944>] task_work_run+0xb4/0xe8
[ 52.642482] c0 [<ffffffc0000cd45c>] do_exit+0x360/0xb9c
[ 52.642487] c0 [<ffffffc0000cf228>] do_group_exit+0x4c/0xb0
[ 52.642494] c0 [<ffffffc0000dd3c8>] get_signal+0x380/0x89c
[ 52.642501] c0 [<ffffffc00008a8f0>] do_signal+0x154/0x518
[ 52.642507] c0 [<ffffffc00008af00>] do_notify_resume+0x70/0x78
[ 52.642512] c0 [<ffffffc000085ee8>] work_pending+0x1c/0x20
[ 52.642514] c1
other info that might help us debug this:
[ 52.642517] c1 Possible unsafe locking scenario:
[ 52.642518] c1 CPU0 CPU1
[ 52.642520] c1 ---- ----
[ 52.642525] c0 lock(ffs_lock);
[ 52.642529] c0 lock(udc_lock);
[ 52.642533] c0 lock(ffs_lock);
[ 52.642537] c0 lock(udc_lock);
[ 52.642539] c1
*** DEADLOCK ***
[ 52.642543] c1 1 lock held by usb ffs open/2808:
[ 52.642555] c0 #0: (ffs_lock){+.+.+.}, at: [<ffffffc00066b244>]
ffs_data_clear+0x30/0x140
[ 52.642557] c1 stack backtrace:
[ 52.642563] c1 CPU: 1 PID: 2808 Comm: usb ffs open Tainted: G
[ 52.642565] c1 Hardware name: Spreadtrum SP9860g Board (DT)
[ 52.642568] c1 Call trace:
[ 52.642573] c1 [<ffffffc00008b430>] dump_backtrace+0x0/0x170
[ 52.642577] c1 [<ffffffc00008b5c0>] show_stack+0x20/0x28
[ 52.642583] c1 [<ffffffc000422694>] dump_stack+0xa8/0xe0
[ 52.642587] c1 [<ffffffc00011e548>] print_circular_bug+0x1fc/0x2e4
[ 52.642591] c1 [<ffffffc000123454>] __lock_acquire+0x2138/0x2238
[ 52.642595] c1 [<ffffffc000123b54>] lock_acquire+0xe4/0x298
[ 52.642599] c1 [<ffffffc000aaf6e8>] mutex_lock_nested+0x7c/0x3cc
[ 52.642604] c1 [<ffffffc00065aeec>] usb_gadget_unregister_driver+0x3c/0xc8
[ 52.642608] c1 [<ffffffc00065995c>] unregister_gadget_item+0x28/0x44
[ 52.642613] c1 [<ffffffc00066b34c>] ffs_data_clear+0x138/0x140
[ 52.642618] c1 [<ffffffc00066b374>] ffs_data_reset+0x20/0x6c
[ 52.642621] c1 [<ffffffc00066efd0>] ffs_data_closed+0xac/0x12c
[ 52.642625] c1 [<ffffffc00066f070>] ffs_ep0_release+0x20/0x2c
[ 52.642629] c1 [<ffffffc00023dbe4>] __fput+0xb0/0x1f4
[ 52.642633] c1 [<ffffffc00023dd9c>] ____fput+0x20/0x2c
[ 52.642636] c1 [<ffffffc0000ee944>] task_work_run+0xb4/0xe8
[ 52.642640] c1 [<ffffffc0000cd45c>] do_exit+0x360/0xb9c
[ 52.642644] c1 [<ffffffc0000cf228>] do_group_exit+0x4c/0xb0
[ 52.642647] c1 [<ffffffc0000dd3c8>] get_signal+0x380/0x89c
[ 52.642651] c1 [<ffffffc00008a8f0>] do_signal+0x154/0x518
[ 52.642656] c1 [<ffffffc00008af00>] do_notify_resume+0x70/0x78
[ 52.642659] c1 [<ffffffc000085ee8>] work_pending+0x1c/0x20
Bug: 62572621
Change-Id: I2f6bea38c449ed56234a6e873d3cb33c2e83ff29
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
(cherry picked from commit b3ce3ce02d146841af012d08506b4071db8ffde3)
|
| |\ \ \ \ \ \
| |/ / / / /
|/| | | | | |
|
| | | |_|/ /
| |/| | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Currently driver is removing pm_qos request after acquiring spinlock in
pcm_close() callback. This could cause warning as pm_qos_remove_request()
can sleep. Hence move removing pm_qos request before acquiring spin lock.
Change-Id: I8e898934c4e83b80c994b2a293abbd920589ac62
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
|
| |\ \ \ \ \ |
|
| | |\ \ \ \ \
| | | |/ / /
| | |/| | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
* refs/heads/tmp-e76c0fa
Linux 4.4.72
arm64: ensure extension of smp_store_release value
arm64: armv8_deprecated: ensure extension of addr
usercopy: Adjust tests to deal with SMAP/PAN
RDMA/qib,hfi1: Fix MR reference count leak on write with immediate
arm64: entry: improve data abort handling of tagged pointers
arm64: hw_breakpoint: fix watchpoint matching for tagged pointers
Make __xfs_xattr_put_listen preperly report errors.
NFSv4: Don't perform cached access checks before we've OPENed the file
NFS: Ensure we revalidate attributes before using execute_ok()
mm: consider memblock reservations for deferred memory initialization sizing
net: better skb->sender_cpu and skb->napi_id cohabitation
serial: sh-sci: Fix panic when serial console and DMA are enabled
tty: Drop krefs for interrupted tty lock
drivers: char: mem: Fix wraparound check to allow mappings up to the end
ASoC: Fix use-after-free at card unregistration
ALSA: timer: Fix missing queue indices reset at SNDRV_TIMER_IOCTL_SELECT
ALSA: timer: Fix race between read and ioctl
drm/nouveau/tmr: fully separate alarm execution/pending lists
drm/vmwgfx: Make sure backup_handle is always valid
drm/vmwgfx: limit the number of mip levels in vmw_gb_surface_define_ioctl()
drm/vmwgfx: Handle vmalloc() failure in vmw_local_fifo_reserve()
perf/core: Drop kernel samples even though :u is specified
powerpc/hotplug-mem: Fix missing endian conversion of aa_index
powerpc/numa: Fix percpu allocations to be NUMA aware
powerpc/eeh: Avoid use after free in eeh_handle_special_event()
scsi: qla2xxx: don't disable a not previously enabled PCI device
KVM: arm/arm64: Handle possible NULL stage2 pud when ageing pages
btrfs: fix memory leak in update_space_info failure path
btrfs: use correct types for page indices in btrfs_page_exists_in_range
cxl: Fix error path on bad ioctl
ufs_getfrag_block(): we only grab ->truncate_mutex on block creation path
ufs_extend_tail(): fix the braino in calling conventions of ufs_new_fragments()
ufs: set correct ->s_maxsize
ufs: restore maintaining ->i_blocks
fix ufs_isblockset()
ufs: restore proper tail allocation
fs: add i_blocksize()
cpuset: consider dying css as offline
Input: elantech - add Fujitsu Lifebook E546/E557 to force crc_enabled
drm/msm: Expose our reservation object when exporting a dmabuf.
target: Re-add check to reject control WRITEs with overflow data
cpufreq: cpufreq_register_driver() should return -ENODEV if init fails
stackprotector: Increase the per-task stack canary's random range from 32 bits to 64 bits on 64-bit platforms
random: properly align get_random_int_hash
drivers: char: random: add get_random_long()
iio: proximity: as3935: fix AS3935_INT mask
iio: light: ltr501 Fix interchanged als/ps register field
staging/lustre/lov: remove set_fs() call from lov_getstripe()
usb: chipidea: debug: check before accessing ci_role
usb: chipidea: udc: fix NULL pointer dereference if udc_start failed
usb: gadget: f_mass_storage: Serialize wake and sleep execution
ext4: fix fdatasync(2) after extent manipulation operations
ext4: keep existing extra fields when inode expands
ext4: fix SEEK_HOLE
xen-netfront: cast grant table reference first to type int
xen-netfront: do not cast grant table reference to signed short
xen/privcmd: Support correctly 64KB page granularity when mapping memory
dmaengine: ep93xx: Always start from BASE0
dmaengine: usb-dmac: Fix DMAOR AE bit definition
KVM: async_pf: avoid async pf injection when in guest mode
arm: KVM: Allow unaligned accesses at HYP
KVM: cpuid: Fix read/write out-of-bounds vulnerability in cpuid emulation
kvm: async_pf: fix rcu_irq_enter() with irqs enabled
nfsd: Fix up the "supattr_exclcreat" attributes
nfsd4: fix null dereference on replay
drm/amdgpu/ci: disable mclk switching for high refresh rates (v2)
crypto: gcm - wait for crypto op not signal safe
KEYS: fix freeing uninitialized memory in key_update()
KEYS: fix dereferencing NULL payload with nonzero length
ptrace: Properly initialize ptracer_cred on fork
serial: ifx6x60: fix use-after-free on module unload
arch/sparc: support NR_CPUS = 4096
sparc64: delete old wrap code
sparc64: new context wrap
sparc64: add per-cpu mm of secondary contexts
sparc64: redefine first version
sparc64: combine activate_mm and switch_mm
sparc64: reset mm cpumask after wrap
sparc: Machine description indices can vary
sparc64: mm: fix copy_tsb to correctly copy huge page TSBs
net: bridge: start hello timer only if device is up
net: ethoc: enable NAPI before poll may be scheduled
net: ping: do not abuse udp_poll()
ipv6: Fix leak in ipv6_gso_segment().
vxlan: fix use-after-free on deletion
tcp: disallow cwnd undo when switching congestion control
cxgb4: avoid enabling napi twice to the same queue
ipv6: xfrm: Handle errors reported by xfrm6_find_1stfragopt()
bnx2x: Fix Multi-Cos
ANDROID: uid_sys_stats: check previous uid_entry before call find_or_register_uid
ANDROID: sdcardfs: d_splice_alias can return error values
Change-Id: I829ebf1a9271dcf0462c537e7bfcbcfde322f336
Signed-off-by: Blagovest Kolenichev <bkolenichev@codeaurora.org>
|
| | | |\ \ \ \
| | | | |/ /
| | | |/| |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Changes in 4.4.72
bnx2x: Fix Multi-Cos
ipv6: xfrm: Handle errors reported by xfrm6_find_1stfragopt()
cxgb4: avoid enabling napi twice to the same queue
tcp: disallow cwnd undo when switching congestion control
vxlan: fix use-after-free on deletion
ipv6: Fix leak in ipv6_gso_segment().
net: ping: do not abuse udp_poll()
net: ethoc: enable NAPI before poll may be scheduled
net: bridge: start hello timer only if device is up
sparc64: mm: fix copy_tsb to correctly copy huge page TSBs
sparc: Machine description indices can vary
sparc64: reset mm cpumask after wrap
sparc64: combine activate_mm and switch_mm
sparc64: redefine first version
sparc64: add per-cpu mm of secondary contexts
sparc64: new context wrap
sparc64: delete old wrap code
arch/sparc: support NR_CPUS = 4096
serial: ifx6x60: fix use-after-free on module unload
ptrace: Properly initialize ptracer_cred on fork
KEYS: fix dereferencing NULL payload with nonzero length
KEYS: fix freeing uninitialized memory in key_update()
crypto: gcm - wait for crypto op not signal safe
drm/amdgpu/ci: disable mclk switching for high refresh rates (v2)
nfsd4: fix null dereference on replay
nfsd: Fix up the "supattr_exclcreat" attributes
kvm: async_pf: fix rcu_irq_enter() with irqs enabled
KVM: cpuid: Fix read/write out-of-bounds vulnerability in cpuid emulation
arm: KVM: Allow unaligned accesses at HYP
KVM: async_pf: avoid async pf injection when in guest mode
dmaengine: usb-dmac: Fix DMAOR AE bit definition
dmaengine: ep93xx: Always start from BASE0
xen/privcmd: Support correctly 64KB page granularity when mapping memory
xen-netfront: do not cast grant table reference to signed short
xen-netfront: cast grant table reference first to type int
ext4: fix SEEK_HOLE
ext4: keep existing extra fields when inode expands
ext4: fix fdatasync(2) after extent manipulation operations
usb: gadget: f_mass_storage: Serialize wake and sleep execution
usb: chipidea: udc: fix NULL pointer dereference if udc_start failed
usb: chipidea: debug: check before accessing ci_role
staging/lustre/lov: remove set_fs() call from lov_getstripe()
iio: light: ltr501 Fix interchanged als/ps register field
iio: proximity: as3935: fix AS3935_INT mask
drivers: char: random: add get_random_long()
random: properly align get_random_int_hash
stackprotector: Increase the per-task stack canary's random range from 32 bits to 64 bits on 64-bit platforms
cpufreq: cpufreq_register_driver() should return -ENODEV if init fails
target: Re-add check to reject control WRITEs with overflow data
drm/msm: Expose our reservation object when exporting a dmabuf.
Input: elantech - add Fujitsu Lifebook E546/E557 to force crc_enabled
cpuset: consider dying css as offline
fs: add i_blocksize()
ufs: restore proper tail allocation
fix ufs_isblockset()
ufs: restore maintaining ->i_blocks
ufs: set correct ->s_maxsize
ufs_extend_tail(): fix the braino in calling conventions of ufs_new_fragments()
ufs_getfrag_block(): we only grab ->truncate_mutex on block creation path
cxl: Fix error path on bad ioctl
btrfs: use correct types for page indices in btrfs_page_exists_in_range
btrfs: fix memory leak in update_space_info failure path
KVM: arm/arm64: Handle possible NULL stage2 pud when ageing pages
scsi: qla2xxx: don't disable a not previously enabled PCI device
powerpc/eeh: Avoid use after free in eeh_handle_special_event()
powerpc/numa: Fix percpu allocations to be NUMA aware
powerpc/hotplug-mem: Fix missing endian conversion of aa_index
perf/core: Drop kernel samples even though :u is specified
drm/vmwgfx: Handle vmalloc() failure in vmw_local_fifo_reserve()
drm/vmwgfx: limit the number of mip levels in vmw_gb_surface_define_ioctl()
drm/vmwgfx: Make sure backup_handle is always valid
drm/nouveau/tmr: fully separate alarm execution/pending lists
ALSA: timer: Fix race between read and ioctl
ALSA: timer: Fix missing queue indices reset at SNDRV_TIMER_IOCTL_SELECT
ASoC: Fix use-after-free at card unregistration
drivers: char: mem: Fix wraparound check to allow mappings up to the end
tty: Drop krefs for interrupted tty lock
serial: sh-sci: Fix panic when serial console and DMA are enabled
net: better skb->sender_cpu and skb->napi_id cohabitation
mm: consider memblock reservations for deferred memory initialization sizing
NFS: Ensure we revalidate attributes before using execute_ok()
NFSv4: Don't perform cached access checks before we've OPENed the file
Make __xfs_xattr_put_listen preperly report errors.
arm64: hw_breakpoint: fix watchpoint matching for tagged pointers
arm64: entry: improve data abort handling of tagged pointers
RDMA/qib,hfi1: Fix MR reference count leak on write with immediate
usercopy: Adjust tests to deal with SMAP/PAN
arm64: armv8_deprecated: ensure extension of addr
arm64: ensure extension of smp_store_release value
Linux 4.4.72
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
commit 0340ff83cd4475261e7474033a381bc125b45244 upstream.
ci_role BUGs when the role is >= CI_ROLE_END.
Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
commit aa1f058d7d9244423b8c5a75b9484b1115df7f02 upstream.
Fix below NULL pointer dereference. we set ci->roles[CI_ROLE_GADGET]
too early in ci_hdrc_gadget_init(), if udc_start() fails due to some
reason, the ci->roles[CI_ROLE_GADGET] check in ci_hdrc_gadget_destroy
can't protect us.
We fix this issue by only setting ci->roles[CI_ROLE_GADGET] if
udc_start() succeed.
[ 1.398550] Unable to handle kernel NULL pointer dereference at
virtual address 00000000
...
[ 1.448600] PC is at dma_pool_free+0xb8/0xf0
[ 1.453012] LR is at dma_pool_free+0x28/0xf0
[ 2.113369] [<ffffff80081817d8>] dma_pool_free+0xb8/0xf0
[ 2.118857] [<ffffff800841209c>] destroy_eps+0x4c/0x68
[ 2.124165] [<ffffff8008413770>] ci_hdrc_gadget_destroy+0x28/0x50
[ 2.130461] [<ffffff800840fa30>] ci_hdrc_probe+0x588/0x7e8
[ 2.136129] [<ffffff8008380fb8>] platform_drv_probe+0x50/0xb8
[ 2.142066] [<ffffff800837f494>] driver_probe_device+0x1fc/0x2a8
[ 2.148270] [<ffffff800837f68c>] __device_attach_driver+0x9c/0xf8
[ 2.154563] [<ffffff800837d570>] bus_for_each_drv+0x58/0x98
[ 2.160317] [<ffffff800837f174>] __device_attach+0xc4/0x138
[ 2.166072] [<ffffff800837f738>] device_initial_probe+0x10/0x18
[ 2.172185] [<ffffff800837e58c>] bus_probe_device+0x94/0xa0
[ 2.177940] [<ffffff800837c560>] device_add+0x3f0/0x560
[ 2.183337] [<ffffff8008380d20>] platform_device_add+0x180/0x240
[ 2.189541] [<ffffff800840f0e8>] ci_hdrc_add_device+0x440/0x4f8
[ 2.195654] [<ffffff8008414194>] ci_hdrc_usb2_probe+0x13c/0x2d8
[ 2.201769] [<ffffff8008380fb8>] platform_drv_probe+0x50/0xb8
[ 2.207705] [<ffffff800837f494>] driver_probe_device+0x1fc/0x2a8
[ 2.213910] [<ffffff800837f5ec>] __driver_attach+0xac/0xb0
[ 2.219575] [<ffffff800837d4b0>] bus_for_each_dev+0x60/0xa0
[ 2.225329] [<ffffff800837ec80>] driver_attach+0x20/0x28
[ 2.230816] [<ffffff800837e880>] bus_add_driver+0x1d0/0x238
[ 2.236571] [<ffffff800837fdb0>] driver_register+0x60/0xf8
[ 2.242237] [<ffffff8008380ef4>] __platform_driver_register+0x44/0x50
[ 2.248891] [<ffffff80086fd440>] ci_hdrc_usb2_driver_init+0x18/0x20
[ 2.255365] [<ffffff8008082950>] do_one_initcall+0x38/0x128
[ 2.261121] [<ffffff80086e0d00>] kernel_init_freeable+0x1ac/0x250
[ 2.267414] [<ffffff800852f0b8>] kernel_init+0x10/0x100
[ 2.272810] [<ffffff8008082680>] ret_from_fork+0x10/0x50
Fixes: 3f124d233e97 ("usb: chipidea: add role init and destroy APIs")
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
commit dc9217b69dd6089dcfeb86ed4b3c671504326087 upstream.
f_mass_storage has a memorry barrier issue with the sleep and wake
functions that can cause a deadlock. This results in intermittent hangs
during MSC file transfer. The host will reset the device after receiving
no response to resume the transfer. This issue is seen when dwc3 is
processing 2 transfer-in-progress events at the same time, invoking
completion handlers for CSW and CBW. Also this issue occurs depending on
the system timing and latency.
To increase the chance to hit this issue, you can force dwc3 driver to
wait and process those 2 events at once by adding a small delay (~100us)
in dwc3_check_event_buf() whenever the request is for CSW and read the
event count again. Avoid debugging with printk and ftrace as extra
delays and memory barrier will mask this issue.
Scenario which can lead to failure:
-----------------------------------
1) The main thread sleeps and waits for the next command in
get_next_command().
2) bulk_in_complete() wakes up main thread for CSW.
3) bulk_out_complete() tries to wake up the running main thread for CBW.
4) thread_wakeup_needed is not loaded with correct value in
sleep_thread().
5) Main thread goes to sleep again.
The pattern is shown below. Note the 2 critical variables.
* common->thread_wakeup_needed
* bh->state
CPU 0 (sleep_thread) CPU 1 (wakeup_thread)
============================== ===============================
bh->state = BH_STATE_FULL;
smp_wmb();
thread_wakeup_needed = 0; thread_wakeup_needed = 1;
smp_rmb();
if (bh->state != BH_STATE_FULL)
sleep again ...
As pointed out by Alan Stern, this is an R-pattern issue. The issue can
be seen when there are two wakeups in quick succession. The
thread_wakeup_needed can be overwritten in sleep_thread, and the read of
the bh->state maybe reordered before the write to thread_wakeup_needed.
This patch applies full memory barrier smp_mb() in both sleep_thread()
and wakeup_thread() to ensure the order which the thread_wakeup_needed
and bh->state are written and loaded.
However, a better solution in the future would be to use wait_queue
method that takes care of managing memory barrier between waker and
waiter.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| |\ \ \ \ \ \ |
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
A USB audio class 3.0 based device may express different audio interface
associations representing the same underlying hardware by using multiple
USB device configuration descriptors. Using BOS configuration summary
descriptor host software can choose which configuration to set. This is
done by going over list of configuration summary descriptors and selecting
the first available configuration supporting BADD subclass of UAC 3.0
protocol.
Change-Id: I548b362437deb525f952d4450cfae7420a524c65
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
This descriptor describes the list of functions present in a given
configuration. There should be one such descriptor per configuration
supported by the device. The order in which these descriptors appear
in the BOS descriptor reflects the order of preference of configurations
as desired by the device for optimal functionality. Configuration Summary
descriptors are used by Host software to decide which Configuration to set
to obtain the desired functionality.
Change-Id: I7ec095ce19caa690c0d3dc0fdd3add5ad37a74f3
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
gsi_ctrl_dev_write() and gsi_ctrl_dev_read() API is directly using user
space provided buffer when qti_packet_debug is enabled. This can result
into using untrusted buffer pointer. Hence use cpkt->buf i.e. kernel
space buffer pointer instead of directly using user space provided buffer.
CRs-Fixed: 2061391
Change-Id: Iba6f2845dae2755446b4b8e9f3041686877d7bc4
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
|
| |\ \ \ \ \ \ \
| |_|_|_|_|/ /
|/| | | | | | |
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
userspace is setting maxburst > 1 for IN endpoint as part of
descriptors passed to f_fs.c driver. Due to this, controller
driver allocating 3KB fifo instead of 1KB and results in fifo
allocations beyond available fifo size for last IN endpoint.
This causes functionality failure. Fix it as workaround by
setting maxburst to one so that only 1KB fifo is allocated for
adb IN endpoint.
Change-Id: I155da2dda408c02ca34a4e244094c4a66f288f74
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
|
| |\ \ \ \ \ \ \ |
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
Currently power Delivery (PD) is enabled by default which sends
PD Hard reset in SINK mode to negogiate PD contract with host machine
after connect, if no capabilities message is received from other device.
This impacts with compliance for example: PMI ignores type-c disconnects
during PD Hard Reset. Add module parameter to disable PD so that it
doesn't enable PD communication during USB3.1 compliance testing.
Change-Id: Ia3e39cee1e65895402c18b380b650f0a34fb0cec
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
|
| |\ \ \ \ \ \ \ \
| |/ / / / / / /
|/| | | | | | | |
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
For targets with multiple UDCs having DRD feature, two UDCs
may be in peripheral mode. In that case, create and bind
android device corresponding to each gadget as and when
mkdir gadget is run. Keep global structure android_device as
android0 (or g1's device) for ease of use by f_midi and
f_audio_source.
Change-Id: Idae6f6d0d8811f27e836f5f6399395a15fbf3c2f
Signed-off-by: Ajay Agarwal <ajaya@codeaurora.org>
|
| |\ \ \ \ \ \ \ \
| |_|_|_|/ / / /
|/| | | | | | | |
|
| | | |/ / / / /
| |/| | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Currently USB driver tries to set power role as none and waits for
disconnect notification to set new mode. But there is a chance that it
might fail and stuck in infinite loop if other device is not dual-role
capable. Fix it by having timeout and bail out in case timeout happens.
Change-Id: I569356ee445c53950ed8fdd3f9994d4ae0e86131
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
|
