| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 6abf2fe6b4bf6e5256b80c5817908151d2d33e9f upstream.
LaCie Rugged USB3-FW appears to be incompatible with UAS. It generates
errors like:
[ 1151.582598] sd 14:0:0:0: tag#16 uas_eh_abort_handler 0 uas-tag 1 inflight: IN
[ 1151.582602] sd 14:0:0:0: tag#16 CDB: Report supported operation codes a3 0c 01 12 00 00 00 00 02 00 00 00
[ 1151.588594] scsi host14: uas_eh_device_reset_handler start
[ 1151.710482] usb 2-4: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 1151.741398] scsi host14: uas_eh_device_reset_handler success
[ 1181.785534] scsi host14: uas_eh_device_reset_handler start
Signed-off-by: Julian Sikorski <belegdol+github@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210720171910.36497-1-belegdol+github@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 1b7f56fbc7a1b66967b6114d1b5f5a257c3abae6 upstream.
The device initiated link power management U1/U2 states should not be
enabled in case the system exit latency plus one bus interval (125us) is
greater than the shortest service interval of any periodic endpoint.
This is the case for both U1 and U2 sytstem exit latencies and link states.
See USB 3.2 section 9.4.9 "Set Feature" for more details
Note, before this patch the host and device initiated U1/U2 lpm states
were both enabled with lpm. After this patch it's possible to end up with
only host inititated U1/U2 lpm in case the exit latencies won't allow
device initiated lpm.
If this case we still want to set the udev->usb3_lpm_ux_enabled flag so
that sysfs users can see the link may go to U1/U2.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210715150122.1995966-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 72f68bf5c756f5ce1139b31daae2684501383ad5 upstream.
There's a small window where a USB 2 remote wake may be left unhandled
due to a race between hub thread and xhci port event interrupt handler.
When the resume event is detected in the xhci interrupt handler it kicks
the hub timer, which should move the port from resume to U0 once resume
has been signalled for long enough.
To keep the hub "thread" running we set a bus_state->resuming_ports flag.
This flag makes sure hub timer function kicks itself.
checking this flag was not properly protected by the spinlock. Flag was
copied to a local variable before lock was taken. The local variable was
then checked later with spinlock held.
If interrupt is handled right after copying the flag to the local variable
we end up stopping the hub thread before it can handle the USB 2 resume.
CPU0 CPU1
(hub thread) (xhci event handler)
xhci_hub_status_data()
status = bus_state->resuming_ports;
<Interrupt>
handle_port_status()
spin_lock()
bus_state->resuming_ports = 1
set_flag(HCD_FLAG_POLL_RH)
spin_unlock()
spin_lock()
if (!status)
clear_flag(HCD_FLAG_POLL_RH)
spin_unlock()
Fix this by taking the lock a bit earlier so that it covers
the resuming_ports flag copy in the hub thread
Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210715150651.1996099-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit f3a1a937f7b240be623d989c8553a6d01465d04f ]
This reverts commit 0bd860493f81eb2a46173f6f5e44cc38331c8dbd.
While the patch was working as stated,ie preventing the L850-GL LTE modem
from crashing on some U3 wake-ups due to a race condition between the
host wake-up and the modem-side wake-up, when using the MBIM interface,
this would force disabling the USB runtime PM on the device.
The increased power consumption is significant for LTE laptops,
and given that with decently recent modem firmwares, when the modem hits
the bug, it automatically recovers (ie it drops from the bus, but
automatically re-enumerates after less than half a second, rather than being
stuck until a power cycle as it was doing with ancient firmware), for
most people, the trade-off now seems in favor of re-enabling it by
default.
For people with access to the platform code, the bug can also be worked-around
successfully by changing the USB3 LFPM polling off-time for the XHCI
controller in the BIOS code.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Link: https://lore.kernel.org/r/20210721092516.2775971-1-vpalatin@chromium.org
Fixes: 0bd860493f81 ("USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| |\| |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
https://android.googlesource.com/kernel/common into lineage-18.1-caf-msm8998
This brings LA.UM.9.2.r1-03400-SDMxx0.0 up to date with
https://android.googlesource.com/kernel/common/ android-4.4-p at commit:
e5239ed489f64 Merge 4.4.276 into android-4.4-p
Change-Id: I5f3fdc31e61b229b299cf72014710d36e42863d8
|
| | |\|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Changes in 4.4.276
ALSA: usb-audio: fix rate on Ozone Z90 USB headset
media: dvb-usb: fix wrong definition
Input: usbtouchscreen - fix control-request directions
net: can: ems_usb: fix use-after-free in ems_usb_disconnect()
usb: gadget: eem: fix echo command packet response issue
USB: cdc-acm: blacklist Heimann USB Appset device
ntfs: fix validity check for file name attribute
iov_iter_fault_in_readable() should do nothing in xarray case
Input: joydev - prevent use of not validated data in JSIOCSBTNMAP ioctl
ARM: dts: at91: sama5d4: fix pinctrl muxing
btrfs: clear defrag status of a root if starting transaction fails
ext4: fix kernel infoleak via ext4_extent_header
ext4: correct the cache_nr in tracepoint ext4_es_shrink_exit
ext4: remove check for zero nr_to_scan in ext4_es_scan()
ext4: fix avefreec in find_group_orlov
SUNRPC: Fix the batch tasks count wraparound.
SUNRPC: Should wake up the privileged task firstly.
s390/cio: dont call css_wait_for_slow_path() inside a lock
iio: ltr501: mark register holding upper 8 bits of ALS_DATA{0,1} and PS_DATA as volatile, too
iio: ltr501: ltr559: fix initialization of LTR501_ALS_CONTR
iio: ltr501: ltr501_read_ps(): add missing endianness conversion
serial_cs: Add Option International GSM-Ready 56K/ISDN modem
ath9k: Fix kernel NULL pointer dereference during ath_reset_internal()
ssb: sdio: Don't overwrite const buffer if block_write fails
seq_buf: Make trace_seq_putmem_hex() support data longer than 8
fuse: check connected before queueing on fpq->io
spi: spi-topcliff-pch: Fix potential double free in pch_spi_process_messages()
spi: omap-100k: Fix the length judgment problem
crypto: nx - add missing MODULE_DEVICE_TABLE
media: cpia2: fix memory leak in cpia2_usb_probe
media: pvrusb2: fix warning in pvr2_i2c_core_done
crypto: qat - check return code of qat_hal_rd_rel_reg()
crypto: qat - remove unused macro in FW loader
media: v4l2-core: Avoid the dangling pointer in v4l2_fh_release
media: bt8xx: Fix a missing check bug in bt878_probe
mmc: via-sdmmc: add a check against NULL pointer dereference
crypto: shash - avoid comparing pointers to exported functions under CFI
media: dvb_net: avoid speculation from net slot
btrfs: disable build on platforms having page size 256K
regulator: da9052: Ensure enough delay time for .set_voltage_time_sel
ACPI: processor idle: Fix up C-state latency if not ordered
block_dump: remove block_dump feature in mark_inode_dirty()
fs: dlm: cancel work sync othercon
random32: Fix implicit truncation warning in prandom_seed_state()
ACPI: bus: Call kobject_put() in acpi_init() error path
platform/x86: toshiba_acpi: Fix missing error code in toshiba_acpi_setup_keyboard()
ia64: mca_drv: fix incorrect array size calculation
crypto: ixp4xx - dma_unmap the correct address
crypto: ux500 - Fix error return code in hash_hw_final()
sata_highbank: fix deferred probing
pata_rb532_cf: fix deferred probing
media: I2C: change 'RST' to "RSET" to fix multiple build errors
pata_octeon_cf: avoid WARN_ON() in ata_host_activate()
pata_ep93xx: fix deferred probing
media: tc358743: Fix error return code in tc358743_probe_of()
media: siano: Fix out-of-bounds warnings in smscore_load_firmware_family2()
mmc: usdhi6rol0: fix error return code in usdhi6_probe()
media: s5p-g2d: Fix a memory leak on ctx->fh.m2m_ctx
spi: spi-sun6i: Fix chipselect/clock bug
crypto: nx - Fix RCU warning in nx842_OF_upd_status
ACPI: sysfs: Fix a buffer overrun problem with description_show()
net: pch_gbe: Propagate error from devm_gpio_request_one()
ehea: fix error return code in ehea_restart_qps()
drm: qxl: ensure surf.data is ininitialized
wireless: carl9170: fix LEDS build errors & warnings
brcmsmac: mac80211_if: Fix a resource leak in an error handling path
ath10k: Fix an error code in ath10k_add_interface()
netlabel: Fix memory leak in netlbl_mgmt_add_common
netfilter: nft_exthdr: check for IPv6 packet before further processing
net: ethernet: aeroflex: fix UAF in greth_of_remove
net: ethernet: ezchip: fix UAF in nps_enet_remove
net: ethernet: ezchip: fix error handling
vxlan: add missing rcu_read_lock() in neigh_reduce()
i40e: Fix error handling in i40e_vsi_open
writeback: fix obtain a reference to a freeing memcg css
tty: nozomi: Fix a resource leak in an error handling function
iio: adis_buffer: do not return ints in irq handlers
iio: accel: bma180: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: accel: stk8312: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
iio: accel: stk8ba50: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
Input: hil_kbd - fix error return code in hil_dev_connect()
char: pcmcia: error out if 'num_bytes_read' is greater than 4 in set_protocol()
tty: nozomi: Fix the error handling path of 'nozomi_card_init()'
scsi: FlashPoint: Rename si_flags field
s390: appldata depends on PROC_SYSCTL
staging: gdm724x: check for buffer overflow in gdm_lte_multi_sdu_pkt()
staging: gdm724x: check for overflow in gdm_lte_netif_rx()
scsi: mpt3sas: Fix error return value in _scsih_expander_add()
phy: ti: dm816x: Fix the error handling path in 'dm816x_usb_phy_probe()
extcon: sm5502: Drop invalid register write in sm5502_reg_data
extcon: max8997: Add missing modalias string
mmc: vub3000: fix control-request direction
scsi: core: Retry I/O for Notify (Enable Spinup) Required error
net: pch_gbe: Use proper accessors to BE data in pch_ptp_match()
hugetlb: clear huge pte during flush function on mips platform
atm: iphase: fix possible use-after-free in ia_module_exit()
mISDN: fix possible use-after-free in HFC_cleanup()
atm: nicstar: Fix possible use-after-free in nicstar_cleanup()
net: Treat __napi_schedule_irqoff() as __napi_schedule() on PREEMPT_RT
reiserfs: add check for invalid 1st journal block
drm/virtio: Fix double free on probe failure
udf: Fix NULL pointer dereference in udf_symlink function
e100: handle eeprom as little endian
ipv6: use prandom_u32() for ID generation
RDMA/cxgb4: Fix missing error code in create_qp()
dm space maps: don't reset space map allocation cursor when committing
net: micrel: check return value after calling platform_get_resource()
selinux: use __GFP_NOWARN with GFP_NOWAIT in the AVC
xfrm: Fix error reporting in xfrm_state_construct.
wlcore/wl12xx: Fix wl12xx get_mac error if device is in ELP
wl1251: Fix possible buffer overflow in wl1251_cmd_scan
cw1200: add missing MODULE_DEVICE_TABLE
atm: nicstar: use 'dma_free_coherent' instead of 'kfree'
atm: nicstar: register the interrupt handler in the right place
sfc: avoid double pci_remove of VFs
sfc: error code if SRIOV cannot be disabled
wireless: wext-spy: Fix out-of-bounds warning
RDMA/cma: Fix rdma_resolve_route() memory leak
Bluetooth: Fix the HCI to MGMT status conversion table
Bluetooth: Shutdown controller after workqueues are flushed or cancelled
Bluetooth: btusb: fix bt fiwmare downloading failure issue for qca btsoc.
sctp: add size validation when walking chunks
fuse: reject internal errno
can: gw: synchronize rcu operations before removing gw job entry
can: bcm: delay release of struct bcm_op after synchronize_rcu()
mac80211: fix memory corruption in EAPOL handling
powerpc/barrier: Avoid collision with clang's __lwsync macro
mmc: sdhci: Fix warning message when accessing RPMB in HS400 mode
ata: ahci_sunxi: Disable DIPM
ASoC: tegra: Set driver_name=tegra for all machine drivers
ipmi/watchdog: Stop watchdog timer when the current action is 'none'
power: supply: ab8500: Fix an old bug
seq_buf: Fix overflow in seq_buf_putmem_hex()
ipack/carriers/tpci200: Fix a double free in tpci200_pci_probe
dm btree remove: assign new_root only when removal succeeds
media: zr364xx: fix memory leak in zr364xx_start_readpipe
media: gspca/sq905: fix control-request direction
media: gspca/sunplus: fix zero-length control requests
media: uvcvideo: Fix pixel format change for Elgato Cam Link 4K
jfs: fix GPF in diFree
KVM: x86: Use guest MAXPHYADDR from CPUID.0x8000_0008 iff TDP is enabled
KVM: X86: Disable hardware breakpoints unconditionally before kvm_x86->run()
tty: serial: fsl_lpuart: fix the potential risk of division or modulo by zero
misc/libmasm/module: Fix two use after free in ibmasm_init_one
Revert "ALSA: bebob/oxfw: fix Kconfig entry for Mackie d.2 Pro"
scsi: lpfc: Fix "Unexpected timeout" error in direct attach topology
tty: serial: 8250: serial_cs: Fix a memory leak in error handling path
fs/jfs: Fix missing error code in lmLogInit()
scsi: iscsi: Add iscsi_cls_conn refcount helpers
mfd: da9052/stmpe: Add and modify MODULE_DEVICE_TABLE
ALSA: sb: Fix potential double-free of CSP mixer elements
powerpc/ps3: Add dma_mask to ps3_dma_region
gpio: zynq: Check return value of pm_runtime_get_sync
ALSA: ppc: fix error return code in snd_pmac_probe()
selftests/powerpc: Fix "no_handler" EBB selftest
ASoC: soc-core: Fix the error return code in snd_soc_of_parse_audio_routing()
ALSA: bebob: add support for ToneWeal FW66
usb: gadget: f_hid: fix endianness issue with descriptors
usb: gadget: hid: fix error return code in hid_bind()
powerpc/boot: Fixup device-tree on little endian
backlight: lm3630a: Fix return code of .update_status() callback
ALSA: hda: Add IRQ check for platform_get_irq()
lib/decompress_unlz4.c: correctly handle zero-padding around initrds.
pwm: spear: Don't modify HW state in .remove callback
power: supply: ab8500: Avoid NULL pointers
power: reset: gpio-poweroff: add missing MODULE_DEVICE_TABLE
ARM: 9087/1: kprobes: test-thumb: fix for LLVM_IAS=1
watchdog: Fix possible use-after-free in wdt_startup()
watchdog: sc520_wdt: Fix possible use-after-free in wdt_turnoff()
watchdog: Fix possible use-after-free by calling del_timer_sync()
ceph: remove bogus checks and WARN_ONs from ceph_set_page_dirty
power: supply: charger-manager: add missing MODULE_DEVICE_TABLE
power: supply: ab8500: add missing MODULE_DEVICE_TABLE
virtio-blk: Fix memory leak among suspend/resume procedure
virtio_console: Assure used length from device is limited
PCI/sysfs: Fix dsm_label_utf16s_to_utf8s() buffer overrun
um: fix error return code in slip_open()
um: fix error return code in winch_tramp()
nfs: fix acl memory leak of posix_acl_create()
ALSA: isa: Fix error return code in snd_cmi8330_probe()
hexagon: use common DISCARDS macro
ARM: dts: exynos: fix PWM LED max brightness on Odroid XU4
rtc: fix snprintf() checking in is_rtc_hctosys()
memory: fsl_ifc: fix leak of IO mapping on probe failure
memory: fsl_ifc: fix leak of private memory on probe failure
scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe()
mips: disable branch profiling in boot/decompress.o
MIPS: vdso: Invalid GIC access through VDSO
seq_file: disallow extremely large seq buffer allocations
Linux 4.4.276
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: If7756927f46fbb8a74337ee1eae8031c0d3579e2
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 88693f770bb09c196b1eb5f06a484a254ecb9924 ]
Fix to return a negative error code from the error handling
case instead of 0.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210618043835.2641360-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 33cb46c4676d01956811b68a29157ea969a5df70 ]
Running sparse checker it shows warning message about
incorrect endianness used for descriptor initialization:
| f_hid.c:91:43: warning: incorrect type in initializer (different base types)
| f_hid.c:91:43: expected restricted __le16 [usertype] bcdHID
| f_hid.c:91:43: got int
Fixing issue with cpu_to_le16() macro, however this is not a real issue
as the value is the same both endians.
Cc: Fabien Chouteau <fabien.chouteau@barco.com>
Cc: Segiy Stetsyuk <serg_stetsuk@ukr.net>
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Link: https://lore.kernel.org/r/20210617162755.29676-1-ruslan.bilovol@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 4897807753e078655a78de39ed76044d784f3e63 upstream.
The device (32a7:0000 Heimann Sensor GmbH USB appset demo) claims to be
a CDC-ACM device in its descriptors but in fact is not. If it is run
with echo disabled it returns garbled data, probably due to something
that happens in the TTY layer. And when run with echo enabled (the
default), it will mess up the calibration data of the sensor the first
time any data is sent to the device.
In short, I had a bad time after connecting the sensor and trying to get
it to work. I hope blacklisting it in the cdc-acm driver will save
someone else a bit of trouble.
Signed-off-by: Hannu Hartikainen <hannu@hrtk.in>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210622141454.337948-1-hannu@hrtk.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 4249d6fbc10fd997abdf8a1ea49c0389a0edf706 upstream.
when receive eem echo command, it will send a response,
but queue this response to the usb request which allocate
from gadget device endpoint zero,
and transmit the request to IN endpoint of eem interface.
on dwc3 gadget, it will trigger following warning in function
__dwc3_gadget_ep_queue(),
if (WARN(req->dep != dep, "request %pK belongs to '%s'\n",
&req->request, req->dep->name))
return -EINVAL;
fix it by allocating a usb request from IN endpoint of eem interface,
and transmit the usb request to same IN endpoint of eem interface.
Signed-off-by: Linyu Yuan <linyyuan@codeaurora.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210616115142.34075-1-linyyuan@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| |\| |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
https://android.googlesource.com/kernel/common into lineage-18.1-caf-msm8998
This brings LA.UM.9.2.r1-03400-SDMxx0.0 up to date with
https://android.googlesource.com/kernel/common/ android-4.4-p at commit:
b5f0035416310 Merge 4.4.274 into android-4.4-p
Conflicts:
include/linux/spi/spi.h
Change-Id: I3daac7891ee93c70ffe08b7e70b77e8b2989af67
|
| | |\|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Changes in 4.4.273
proc: Track /proc/$pid/attr/ opener mm_struct
net/nfc/rawsock.c: fix a permission check bug
ASoC: sti-sas: add missing MODULE_DEVICE_TABLE
isdn: mISDN: netjet: Fix crash in nj_probe:
bonding: init notify_work earlier to avoid uninitialized use
netlink: disable IRQs for netlink_lock_table()
net: mdiobus: get rid of a BUG_ON()
net/qla3xxx: fix schedule while atomic in ql_sem_spinlock
scsi: vmw_pvscsi: Set correct residual data length
scsi: target: qla2xxx: Wait for stop_phase1 at WWN removal
net: macb: ensure the device is available before accessing GEMGXL control registers
net: appletalk: cops: Fix data race in cops_probe1
MIPS: Fix kernel hang under FUNCTION_GRAPH_TRACER and PREEMPT_TRACER
bnx2x: Fix missing error code in bnx2x_iov_init_one()
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers
i2c: mpc: Make use of i2c_recover_bus()
i2c: mpc: implement erratum A-004447 workaround
kvm: avoid speculation-based attacks from out-of-range memslot accesses
btrfs: return value from btrfs_mark_extent_written() in case of error
cgroup1: don't allow '\n' in renaming
USB: f_ncm: ncm_bitrate (speed) is unsigned
usb: dwc3: ep0: fix NULL pointer exception
USB: serial: ftdi_sio: add NovaTech OrionMX product ID
USB: serial: omninet: add device id for Zyxel Omni 56K Plus
USB: serial: quatech2: fix control-request directions
usb: gadget: eem: fix wrong eem header operation
perf: Fix data race between pin_count increment/decrement
NFS: Fix a potential NULL dereference in nfs_get_client()
perf session: Correct buffer copying when peeking events
kvm: fix previous commit for 32-bit builds
NFSv4: nfs4_proc_set_acl needs to restore NFS_CAP_UIDGID_NOMAP on error.
scsi: core: Only put parent device if host state differs from SHOST_CREATED
ftrace: Do not blindly read the ip address in ftrace_bug()
proc: only require mm_struct for writing
Linux 4.4.273
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I97fdaeb60b62a57bf34ecceabda8be5cee23a0e7
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 305f670846a31a261462577dd0b967c4fa796871 upstream.
when skb_clone() or skb_copy_expand() fail,
it should pull skb with lengh indicated by header,
or not it will read network data and check it as header.
Cc: <stable@vger.kernel.org>
Signed-off-by: Linyu Yuan <linyyuan@codeaurora.com>
Link: https://lore.kernel.org/r/20210608233547.3767-1-linyyuan@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit eb8dbe80326c3d44c1e38ee4f40e0d8d3e06f2d0 upstream.
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the three requests which erroneously used usb_rcvctrlpipe().
Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver")
Cc: stable@vger.kernel.org # 3.5
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit fc0b3dc9a11771c3919eaaaf9d649138b095aa0f upstream.
Add device id for Zyxel Omni 56K Plus modem, this modem include:
USB chip:
NetChip
NET2888
Main chip:
901041A
F721501APGF
Another modem using the same chips is the Zyxel Omni 56K DUO/NEO,
could be added with the right USB ID.
Signed-off-by: Alexandre GRIVEAUX <agriveaux@deutnet.info>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit bc96c72df33ee81b24d87eab953c73f7bcc04f29 upstream.
Add PID for the NovaTech OrionMX so it can be automatically detected.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit d00889080ab60051627dab1d85831cd9db750e2a upstream.
There is no validation of the index from dwc3_wIndex_to_dep() and we might
be referring a non-existing ep and trigger a NULL pointer exception. In
certain configurations we might use fewer eps and the index might wrongly
indicate a larger ep index than existing.
By adding this validation from the patch we can actually report a wrong
index back to the caller.
In our usecase we are using a composite device on an older kernel, but
upstream might use this fix also. Unfortunately, I cannot describe the
hardware for others to reproduce the issue as it is a proprietary
implementation.
[ 82.958261] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a4
[ 82.966891] Mem abort info:
[ 82.969663] ESR = 0x96000006
[ 82.972703] Exception class = DABT (current EL), IL = 32 bits
[ 82.978603] SET = 0, FnV = 0
[ 82.981642] EA = 0, S1PTW = 0
[ 82.984765] Data abort info:
[ 82.987631] ISV = 0, ISS = 0x00000006
[ 82.991449] CM = 0, WnR = 0
[ 82.994409] user pgtable: 4k pages, 39-bit VAs, pgdp = 00000000c6210ccc
[ 83.000999] [00000000000000a4] pgd=0000000053aa5003, pud=0000000053aa5003, pmd=0000000000000000
[ 83.009685] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[ 83.026433] Process irq/62-dwc3 (pid: 303, stack limit = 0x000000003985154c)
[ 83.033470] CPU: 0 PID: 303 Comm: irq/62-dwc3 Not tainted 4.19.124 #1
[ 83.044836] pstate: 60000085 (nZCv daIf -PAN -UAO)
[ 83.049628] pc : dwc3_ep0_handle_feature+0x414/0x43c
[ 83.054558] lr : dwc3_ep0_interrupt+0x3b4/0xc94
...
[ 83.141788] Call trace:
[ 83.144227] dwc3_ep0_handle_feature+0x414/0x43c
[ 83.148823] dwc3_ep0_interrupt+0x3b4/0xc94
[ 83.181546] ---[ end trace aac6b5267d84c32f ]---
Signed-off-by: Marian-Cristian Rotariu <marian.c.rotariu@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210608162650.58426-1-marian.c.rotariu@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 3370139745853f7826895293e8ac3aec1430508e upstream.
[ 190.544755] configfs-gadget gadget: notify speed -44967296
This is because 4250000000 - 2**32 is -44967296.
Fixes: 9f6ce4240a2b ("usb: gadget: f_ncm.c added")
Cc: Brooke Basile <brookebasile@gmail.com>
Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Yauheni Kaliuta <yauheni.kaliuta@nokia.com>
Cc: Linux USB Mailing List <linux-usb@vger.kernel.org>
Acked-By: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210608005344.3762668-1-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | |\|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Changes in 4.4.271
mm, vmstat: drop zone->lock in /proc/pagetypeinfo
netfilter: x_tables: Use correct memory barriers.
NFC: nci: fix memory leak in nci_allocate_device
proc: Check /proc/$pid/attr/ writes against file opener
net: hso: fix control-request directions
mac80211: assure all fragments are encrypted
mac80211: prevent mixed key and fragment cache attacks
mac80211: properly handle A-MSDUs that start with an RFC 1042 header
cfg80211: mitigate A-MSDU aggregation attacks
mac80211: drop A-MSDUs on old ciphers
mac80211: add fragment cache to sta_info
mac80211: check defrag PN against current frame
mac80211: prevent attacks on TKIP/WEP as well
mac80211: do not accept/forward invalid EAPOL frames
mac80211: extend protection against mixed key and fragment cache attacks
dm snapshot: properly fix a crash when an origin has no snapshots
kgdb: fix gcc-11 warnings harder
misc/uss720: fix memory leak in uss720_probe
mei: request autosuspend after sending rx flow control
staging: iio: cdc: ad7746: avoid overwrite of num_channels
iio: adc: ad7793: Add missing error code in ad7793_setup()
USB: trancevibrator: fix control-request direction
serial: rp2: use 'request_firmware' instead of 'request_firmware_nowait'
USB: serial: option: add Telit LE910-S1 compositions 0x7010, 0x7011
USB: serial: ftdi_sio: add IDs for IDS GmbH Products
USB: serial: pl2303: add device id for ADLINK ND-6530 GC
net: usb: fix memory leak in smsc75xx_bind
spi: Fix use-after-free with devm_spi_alloc_*
spi: spi-sh: Fix use-after-free on unbind
Bluetooth: cmtp: fix file refcount when cmtp_attach_device fails
NFS: fix an incorrect limit in filelayout_decode_layout()
NFS: Don't corrupt the value of pg_bytes_written in nfs_do_recoalesce()
NFSv4: Fix v4.0/v4.1 SEEK_DATA return -ENOTSUPP when set NFS_V4_2 config
net/mlx4: Fix EEPROM dump support
Revert "net:tipc: Fix a double free in tipc_sk_mcast_rcv"
tipc: skb_linearize the head skb when reassembling msgs
i2c: s3c2410: fix possible NULL pointer deref on read message after write
i2c: i801: Don't generate an interrupt on bus reset
platform/x86: hp_accel: Avoid invoking _INI to speed up resume
net: fujitsu: fix potential null-ptr-deref
net: caif: remove BUG_ON(dev == NULL) in caif_xmit
char: hpet: add checks after calling ioremap
isdn: mISDNinfineon: check/cleanup ioremap failure correctly in setup_io
libertas: register sysfs groups properly
media: dvb: Add check on sp8870_readreg return
media: gspca: properly check for errors in po1030_probe()
scsi: BusLogic: Fix 64-bit system enumeration error for Buslogic
openrisc: Define memory barrier mb
btrfs: do not BUG_ON in link_to_fixup_dir
drm/amdgpu: Fix a use-after-free
net: netcp: Fix an error message
net: bnx2: Fix error return code in bnx2_init_board()
mld: fix panic in mld_newpack()
staging: emxx_udc: fix loop in _nbu2ss_nuke()
scsi: libsas: Use _safe() loop in sas_resume_port()
sch_dsmark: fix a NULL deref in qdisc_reset()
MIPS: alchemy: xxs1500: add gpio-au1000.h header file
MIPS: ralink: export rt_sysc_membase for rt2880_wdt.c
hugetlbfs: hugetlb_fault_mutex_hash() cleanup
bluetooth: eliminate the potential race condition when removing the HCI controller
usb: core: reduce power-on-good delay time of root hub
x86, asm: change the GEN_*_RMWcc() macros to not quote the condition
x86/asm: Add instruction suffixes to bitops
x86/entry/64: Add instruction suffix
Linux 4.4.271
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I4d2a335d92f357364741f729648d8946007ba04c
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 90d28fb53d4a51299ff324dede015d5cb11b88a2 upstream.
Return the exactly delay time given by root hub descriptor,
this helps to reduce resume time etc.
Due to the root hub descriptor is usually provided by the host
controller driver, if there is compatibility for a root hub,
we can fix it easily without affect other root hub
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1618017645-12259-1-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit f8e8c1b2f782e7391e8a1c25648ce756e2a7d481 upstream.
This adds the device id for the ADLINK ND-6530 which is a PL2303GC based
device.
Signed-off-by: Zolton Jheng <s6668c2t@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit c5a80540e425a5f9a82b0f3163e3b6a4331f33bc upstream.
Add the IDS GmbH Vendor ID and the Product IDs for SI31A (2xRS232)
and CM31A (LoRaWAN Modem).
Signed-off-by: Dominik Andreas Schorpp <dominik.a.schorpp@ids.de>
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit e467714f822b5d167a7fb03d34af91b5b6af1827 upstream.
Add support for the following Telit LE910-S1 compositions:
0x7010: rndis, tty, tty, tty
0x7011: ecm, tty, tty, tty
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20210428072634.5091-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 746e4acf87bcacf1406e05ef24a0b7139147c63e upstream.
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the set-speed request which erroneously used USB_DIR_IN and update
the default timeout argument to match (same value).
Fixes: 5638e4d92e77 ("USB: add PlayStation 2 Trance Vibrator driver")
Cc: stable@vger.kernel.org # 2.6.19
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210521133109.17396-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit dcb4b8ad6a448532d8b681b5d1a7036210b622de upstream.
uss720_probe forgets to decrease the refcount of usbdev in uss720_probe.
Fix this by decreasing the refcount of usbdev by usb_put_dev.
BUG: memory leak
unreferenced object 0xffff888101113800 (size 2048):
comm "kworker/0:1", pid 7, jiffies 4294956777 (age 28.870s)
hex dump (first 32 bytes):
ff ff ff ff 31 00 00 00 00 00 00 00 00 00 00 00 ....1...........
00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 ................
backtrace:
[<ffffffff82b8e822>] kmalloc include/linux/slab.h:554 [inline]
[<ffffffff82b8e822>] kzalloc include/linux/slab.h:684 [inline]
[<ffffffff82b8e822>] usb_alloc_dev+0x32/0x450 drivers/usb/core/usb.c:582
[<ffffffff82b98441>] hub_port_connect drivers/usb/core/hub.c:5129 [inline]
[<ffffffff82b98441>] hub_port_connect_change drivers/usb/core/hub.c:5363 [inline]
[<ffffffff82b98441>] port_event drivers/usb/core/hub.c:5509 [inline]
[<ffffffff82b98441>] hub_event+0x1171/0x20c0 drivers/usb/core/hub.c:5591
[<ffffffff81259229>] process_one_work+0x2c9/0x600 kernel/workqueue.c:2275
[<ffffffff81259b19>] worker_thread+0x59/0x5d0 kernel/workqueue.c:2421
[<ffffffff81261228>] kthread+0x178/0x1b0 kernel/kthread.c:292
[<ffffffff8100227f>] ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294
Fixes: 0f36163d3abe ("[PATCH] usb: fix uss720 schedule with interrupts off")
Cc: stable <stable@vger.kernel.org>
Reported-by: syzbot+636c58f40a86b4a879e7@syzkaller.appspotmail.com
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Link: https://lore.kernel.org/r/20210514124348.6587-1-mudongliangabcd@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| |\| |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
https://android.googlesource.com/kernel/common into lineage-18.1-caf-msm8998
This brings LA.UM.9.2.r1-03300-SDMxx0.0 up to date with
https://android.googlesource.com/kernel/common/ android-4.4-p at commit:
3628cdd31199d Merge 4.4.270 into android-4.4-p
Conflicts:
drivers/mmc/core/core.c
drivers/usb/core/hub.c
kernel/trace/trace.c
Change-Id: I6b81471122341f9769ce9c65cbd0fedd5e908b38
|
| | |\|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Changes in 4.4.269
timerfd: Reject ALARM timerfds without CAP_WAKE_ALARM
net: usb: ax88179_178a: initialize local variables before use
iwlwifi: Fix softirq/hardirq disabling in iwl_pcie_enqueue_hcmd()
ALSA: usb-audio: Add MIDI quirk for Vox ToneLab EX
USB: Add LPM quirk for Lenovo ThinkPad USB-C Dock Gen2 Ethernet
USB: Add reset-resume quirk for WD19's Realtek Hub
platform/x86: thinkpad_acpi: Correct thermal sensor allocation
s390/disassembler: increase ebpf disasm buffer size
ACPI: custom_method: fix potential use-after-free issue
ACPI: custom_method: fix a possible memory leak
ecryptfs: fix kernel panic with null dev_name
mmc: core: Do a power cycle when the CMD11 fails
mmc: core: Set read only for SD cards with permanent write protect bit
fbdev: zero-fill colormap in fbcmap.c
staging: wimax/i2400m: fix byte-order issue
usb: gadget: uvc: add bInterval checking for HS mode
PCI: PM: Do not read power state in pci_enable_device_flags()
x86/build: Propagate $(CLANG_FLAGS) to $(REALMODE_FLAGS)
spi: dln2: Fix reference leak to master
spi: omap-100k: Fix reference leak to master
intel_th: Consistency and off-by-one fix
phy: phy-twl4030-usb: Fix possible use-after-free in twl4030_usb_remove()
btrfs: convert logic BUG_ON()'s in replace_path to ASSERT()'s
scsi: target: pscsi: Fix warning in pscsi_complete_cmd()
media: ite-cir: check for receive overflow
media: media/saa7164: fix saa7164_encoder_register() memory leak bugs
media: gspca/sq905.c: fix uninitialized variable
media: em28xx: fix memory leak
clk: socfpga: arria10: Fix memory leak of socfpga_clk on error return
power: supply: generic-adc-battery: fix possible use-after-free in gab_remove()
power: supply: s3c_adc_battery: fix possible use-after-free in s3c_adc_bat_remove()
media: i2c: adv7511-v4l2: fix possible use-after-free in adv7511_remove()
media: dvb-usb: fix memory leak in dvb_usb_adapter_init
media: gscpa/stv06xx: fix memory leak
drm/msm/mdp5: Configure PP_SYNC_HEIGHT to double the vtotal
drm/amdgpu: fix NULL pointer dereference
scsi: lpfc: Fix crash when a REG_RPI mailbox fails triggering a LOGO response
scsi: libfc: Fix a format specifier
ALSA: emu8000: Fix a use after free in snd_emu8000_create_mixer
ALSA: sb: Fix two use after free in snd_sb_qsound_build
arm64/vdso: Discard .note.gnu.property sections in vDSO
openvswitch: fix stack OOB read while fragmenting IPv4 packets
jffs2: Fix kasan slab-out-of-bounds problem
powerpc/eeh: Fix EEH handling for hugepages in ioremap space.
powerpc: fix EDEADLOCK redefinition error in uapi/asm/errno.h
jffs2: check the validity of dstlen in jffs2_zlib_compress()
ftrace: Handle commands when closing set_ftrace_filter file
ext4: fix check to prevent false positive report of incorrect used inodes
ext4: fix error code in ext4_commit_super
usb: gadget: dummy_hcd: fix gpf in gadget_setup
usb: gadget/function/f_fs string table fix for multiple languages
dm persistent data: packed struct should have an aligned() attribute too
dm space map common: fix division bug in sm_ll_find_free_block()
Bluetooth: verify AMP hci_chan before amp_destroy
hsr: use netdev_err() instead of WARN_ONCE()
net/nfc: fix use-after-free llcp_sock_bind/connect
FDDI: defxx: Bail out gracefully with unassigned PCI resource for CSR
misc: lis3lv02d: Fix false-positive WARN on various HP models
misc: vmw_vmci: explicitly initialize vmci_notify_bm_set_msg struct
misc: vmw_vmci: explicitly initialize vmci_datagram payload
tracing: Use strlcpy() instead of strcpy() in __trace_find_cmdline()
tracing: Treat recording comm for idle task as a success
tracing: Map all PIDs to command lines
tracing: Restructure trace_clock_global() to never block
md: factor out a mddev_find_locked helper from mddev_find
md: md_open returns -EBUSY when entering racing area
ipw2x00: potential buffer overflow in libipw_wx_set_encodeext()
cfg80211: scan: drop entry from hidden_list on overflow
drm/radeon: fix copy of uninitialized variable back to userspace
ALSA: hda/realtek: Re-order ALC882 Acer quirk table entries
ALSA: hda/realtek: Re-order ALC882 Sony quirk table entries
ALSA: hda/realtek: Re-order ALC269 Sony quirk table entries
ALSA: hda/realtek: Remove redundant entry for ALC861 Haier/Uniwill devices
KVM: s390: split kvm_s390_real_to_abs
usb: gadget: pch_udc: Revert d3cb25a12138 completely
memory: gpmc: fix out of bounds read and dereference on gpmc_cs[]
ARM: dts: exynos: correct PMIC interrupt trigger level on SMDK5250
ARM: dts: exynos: correct PMIC interrupt trigger level on Snow
usb: gadget: pch_udc: Replace cpu_to_le32() by lower_32_bits()
usb: gadget: pch_udc: Check if driver is present before calling ->setup()
usb: gadget: pch_udc: Check for DMA mapping error
crypto: qat - don't release uninitialized resources
fotg210-udc: Fix DMA on EP0 for length > max packet size
fotg210-udc: Fix EP0 IN requests bigger than two packets
fotg210-udc: Remove a dubious condition leading to fotg210_done
fotg210-udc: Mask GRP2 interrupts we don't handle
fotg210-udc: Don't DMA more than the buffer can take
fotg210-udc: Complete OUT requests on short packets
mtd: require write permissions for locking and badblock ioctls
crypto: qat - fix error path in adf_isr_resource_alloc()
staging: rtl8192u: Fix potential infinite loop
crypto: qat - Fix a double free in adf_create_ring
usb: gadget: r8a66597: Add missing null check on return from platform_get_resource
USB: cdc-acm: fix unprivileged TIOCCSERIAL
tty: fix return value for unsupported ioctls
ttyprintk: Add TTY hangup callback.
media: vivid: fix assignment of dev->fbuf_out_flags
media: omap4iss: return error code when omap4iss_get() failed
media: m88rs6000t: avoid potential out-of-bounds reads on arrays
pata_arasan_cf: fix IRQ check
pata_ipx4xx_cf: fix IRQ check
sata_mv: add IRQ checks
ata: libahci_platform: fix IRQ check
scsi: fcoe: Fix mismatched fcoe_wwn_from_mac declaration
media: dvb-usb-remote: fix dvb_usb_nec_rc_key_to_event type mismatch
scsi: jazz_esp: Add IRQ check
scsi: sun3x_esp: Add IRQ check
scsi: sni_53c710: Add IRQ check
HSI: core: fix resource leaks in hsi_add_client_from_dt()
x86/events/amd/iommu: Fix sysfs type mismatch
HID: plantronics: Workaround for double volume key presses
net: lapbether: Prevent racing when checking whether the netif is running
powerpc/prom: Mark identical_pvr_fixup as __init
ALSA: core: remove redundant spin_lock pair in snd_card_disconnect
nfc: pn533: prevent potential memory corruption
ALSA: usb-audio: Add error checks for usb_driver_claim_interface() calls
powerpc: iommu: fix build when neither PCI or IBMVIO is set
mac80211: bail out if cipher schemes are invalid
mt7601u: fix always true expression
net: thunderx: Fix unintentional sign extension issue
i2c: cadence: add IRQ check
i2c: jz4780: add IRQ check
i2c: sh7760: add IRQ check
powerpc/pseries: extract host bridge from pci_bus prior to bus removal
i2c: sh7760: fix IRQ error path
mwl8k: Fix a double Free in mwl8k_probe_hw
vsock/vmci: log once the failed queue pair allocation
net: davinci_emac: Fix incorrect masking of tx and rx error channel
ath9k: Fix error check in ath9k_hw_read_revisions() for PCI devices
powerpc/52xx: Fix an invalid ASM expression ('addi' used instead of 'add')
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
kfifo: fix ternary sign extension bugs
Revert "net/sctp: fix race condition in sctp_destroy_sock"
sctp: delay auto_asconf init until binding the first addr
fs: dlm: fix debugfs dump
tipc: convert dest node's address to network order
net: stmmac: Set FIFO sizes for ipq806x
ALSA: hdsp: don't disable if not enabled
ALSA: hdspm: don't disable if not enabled
ALSA: rme9652: don't disable if not enabled
Bluetooth: Set CONF_NOT_COMPLETE as l2cap_chan default
Bluetooth: initialize skb_queue_head at l2cap_chan_create()
ip6_vti: proper dev_{hold|put} in ndo_[un]init methods
mac80211: clear the beacon's CRC after channel switch
cuse: prevent clone
selftests: Set CC to clang in lib.mk if LLVM is set
kconfig: nconf: stop endless search loops
sctp: Fix out-of-bounds warning in sctp_process_asconf_param()
ASoC: rt286: Generalize support for ALC3263 codec
wl3501_cs: Fix out-of-bounds warnings in wl3501_send_pkt
wl3501_cs: Fix out-of-bounds warnings in wl3501_mgmt_join
powerpc/iommu: Annotate nested lock for lockdep
ASoC: rt286: Make RT286_SET_GPIO_* readable and writable
PCI: Release OF node in pci_scan_device()'s error path
NFS: Deal correctly with attribute generation counter overflow
pNFS/flexfiles: fix incorrect size check in decode_nfs_fh()
NFSv4.2 fix handling of sr_eof in SEEK's reply
sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b
drm/radeon: Fix off-by-one power_state index heap overwrite
ksm: fix potential missing rmap_item for stable_node
kernel: kexec_file: fix error return code of kexec_calculate_store_digests()
ARC: entry: fix off-by-one error in syscall number validation
powerpc/64s: Fix crashes when toggling entry flush barrier
squashfs: fix divide error in calculate_skip()
usb: fotg210-hcd: Fix an error message
usb: xhci: Increase timeout for HC halt
usb: dwc2: Fix gadget DMA unmap direction
usb: core: hub: fix race condition about TRSMRCY of resume
KVM: x86: Cancel pvclock_gtod_work on module removal
FDDI: defxx: Make MMIO the configuration default except for EISA
thermal/core/fair share: Lock the thermal zone while looping over instances
dm ioctl: fix out of bounds array access when no devices
kobject_uevent: remove warning in init_uevent_argv()
x86/msr: Fix wr/rdmsr_safe_regs_on_cpu() prototypes
kgdb: fix gcc-11 warning on indentation
usb: sl811-hcd: improve misleading indentation
cxgb4: Fix the -Wmisleading-indentation warning
isdn: capi: fix mismatched prototypes
ACPI / hotplug / PCI: Fix reference count leak in enable_slot()
um: Mark all kernel symbols as local
ALSA: hda: generic: change the DAC ctl name for LO+SPK or LO+HP
sit: proper dev_{hold|put} in ndo_[un]init methods
ip6_tunnel: sit: proper dev_{hold|put} in ndo_[un]init methods
ipv6: remove extra dev_hold() for fallback tunnels
xhci: Do not use GFP_KERNEL in (potentially) atomic context
iio: tsl2583: Fix division by a zero lux_val
Linux 4.4.269
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ifc6e8ab285aa71c13faa3c5002c25c5e33110b47
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit dda32c00c9a0fa103b5d54ef72c477b7aa993679 upstream.
'xhci_urb_enqueue()' is passed a 'mem_flags' argument, because "URBs may be
submitted in interrupt context" (see comment related to 'usb_submit_urb()'
in 'drivers/usb/core/urb.c')
So this flag should be used in all the calling chain.
Up to now, 'xhci_check_maxpacket()' which is only called from
'xhci_urb_enqueue()', uses GFP_KERNEL.
Be safe and pass the mem_flags to this function as well.
Fixes: ddba5cd0aeff ("xhci: Use command structures when queuing commands on the command ring")
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210512080816.866037-4-mathias.nyman@linux.intel.com
[iwamatsu: Adjust context]
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 8460f6003a1d2633737b89c4f69d6f4c0c7c65a3 upstream.
gcc-11 now warns about a confusingly indented code block:
drivers/usb/host/sl811-hcd.c: In function ‘sl811h_hub_control’:
drivers/usb/host/sl811-hcd.c:1291:9: error: this ‘if’ clause does not guard... [-Werror=misleading-indentation]
1291 | if (*(u16*)(buf+2)) /* only if wPortChange is interesting */
| ^~
drivers/usb/host/sl811-hcd.c:1295:17: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
1295 | break;
Rewrite this to use a single if() block with the __is_defined() macro.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210322164244.827589-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 975f94c7d6c306b833628baa9aec3f79db1eb3a1 upstream.
This may happen if the port becomes resume status exactly
when usb_port_resume() gets port status, it still need provide
a TRSMCRY time before access the device.
CC: <stable@vger.kernel.org>
Reported-by: Tianping Fang <tianping.fang@mediatek.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20210512020738.52961-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 75a41ce46bae6cbe7d3bb2584eb844291d642874 upstream.
The dwc2 gadget support maps and unmaps DMA buffers as necessary. When
mapping and unmapping it uses the direction of the endpoint to select
the direction of the DMA transfer, but this fails for Control OUT
transfers because the unmap occurs after the endpoint direction has
been reversed for the status phase.
A possible solution would be to unmap the buffer before the direction
is changed, but a safer, less invasive fix is to remember the buffer
direction independently of the endpoint direction.
Fixes: fe0b94abcdf6 ("usb: dwc2: gadget: manage ep0 state in software")
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Link: https://lore.kernel.org/r/20210506112200.2893922-1-phil@raspberrypi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit ca09b1bea63ab83f4cca3a2ae8bc4f597ec28851 upstream.
On some devices (specifically the SC8180x based Surface Pro X with
QCOM04A6) HC halt / xhci_halt() times out during boot. Manually binding
the xhci-hcd driver at some point later does not exhibit this behavior.
To work around this, double XHCI_MAX_HALT_USEC, which also resolves this
issue.
Cc: <stable@vger.kernel.org>
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210512080816.866037-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit a60a34366e0d09ca002c966dd7c43a68c28b1f82 ]
'retval' is known to be -ENODEV here.
This is a hard-coded default error code which is not useful in the error
message. Moreover, another error message is printed at the end of the
error handling path. The corresponding error code (-ENOMEM) is more
informative.
So remove simplify the first error message.
While at it, also remove the useless initialization of 'retval'.
Fixes: 7d50195f6c50 ("usb: host: Faraday fotg210-hcd driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/94531bcff98e46d4f9c20183a90b7f47f699126c.1620333419.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit dd5619582d60007139f0447382d2839f4f9e339b ]
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.
A non-privileged user has only ever been able to set the since long
deprecated ASYNC_SPD flags and trying to change any other *supported*
feature should result in -EPERM being returned. Setting the current
values for any supported features should return success.
Fix the cdc-acm implementation which instead indicated that the
TIOCSSERIAL ioctl was not even implemented when a non-privileged user
set the current values.
Fixes: ba2d8ce9db0a ("cdc-acm: implement TIOCSSERIAL to avoid blocking close(2)")
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210408131602.27956-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
platform_get_resource
[ Upstream commit 9c2076090c2815fe7c49676df68dde7e60a9b9fc ]
The call to platform_get_resource can potentially return a NULL pointer
on failure, so add this check and return -EINVAL if it fails.
Fixes: c41442474a26 ("usb: gadget: R8A66597 peripheral controller support.")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Dereference null return")
Link: https://lore.kernel.org/r/20210406184510.433497-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 75bb93be0027123b5db6cbcce89eb62f0f6b3c5b ]
A short packet indicates the end of a transfer and marks the request as
complete.
Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-8-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 3e7c2510bdfe89a9ec223dd7acd6bfc8bb1cbeb6 ]
Before this, it wrote as much as available into the buffer, even if it
didn't fit.
Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-7-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 9aee3a23d6455200702f3a57e731fa11e8408667 ]
Currently it leaves unhandled interrupts unmasked, but those are never
acked. In the case of a "device idle" interrupt, this leads to an
effectively frozen system until plugging it in.
Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-5-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit c7f755b243494d6043aadcd9a2989cb157958b95 ]
When the EP0 IN request was not completed but less than a packet sent,
it would complete the request successfully. That doesn't make sense
and can't really happen as fotg210_start_dma always sends
min(length, maxpkt) bytes.
Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-4-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 078ba935651e149c92c41161e0322e3372cc2705 ]
For a 134 Byte packet, it sends the first two 64 Byte packets just fine,
but then notice that less than a packet is remaining and call fotg210_done
without actually sending the rest.
Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-3-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 755915fc28edfc608fa89a163014acb2f31c1e19 ]
For a 75 Byte request, it would send the first 64 separately, then detect
that the remaining 11 Byte fit into a single DMA, but due to this bug set
the length to the original 75 Bytes. This leads to a DMA failure (which is
ignored...) and the request completes without the remaining bytes having
been sent.
Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-2-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 4a28d77e359009b846951b06f7c0d8eec8dce298 ]
DMA mapping might fail, we have to check it with dma_mapping_error().
Otherwise DMA-API is not happy:
DMA-API: pch_udc 0000:02:02.4: device driver failed to check map error[device address=0x00000000027ee678] [size=64 bytes] [mapped as single]
Fixes: abab0c67c061 ("usb: pch_udc: Fixed issue which does not work with g_serial")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210323153626.54908-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit fbdbbe6d3ee502b3bdeb4f255196bb45003614be ]
Since we have a separate routine for VBUS sense, the interrupt may occur
before gadget driver is present. Hence, ->setup() call may oops the kernel:
[ 55.245843] BUG: kernel NULL pointer dereference, address: 00000010
...
[ 55.245843] EIP: pch_udc_isr.cold+0x162/0x33f
...
[ 55.245843] <IRQ>
[ 55.245843] ? pch_udc_svc_data_out+0x160/0x160
Check if driver is present before calling ->setup().
Fixes: f646cf94520e ("USB device driver of Topcliff PCH")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210323153626.54908-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 91356fed6afd1c83bf0d3df1fc336d54e38f0458 ]
Either way ~0 will be in the correct byte order, hence
replace cpu_to_le32() by lower_32_bits(). Moreover,
it makes sparse happy, otherwise it complains:
.../pch_udc.c:1813:27: warning: incorrect type in assignment (different base types)
.../pch_udc.c:1813:27: expected unsigned int [usertype] dataptr
.../pch_udc.c:1813:27: got restricted __le32 [usertype]
Fixes: f646cf94520e ("USB device driver of Topcliff PCH")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210323153626.54908-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 50a318cc9b54a36f00beadf77e578a50f3620477 upstream.
The commit d3cb25a12138 ("usb: gadget: udc: fix spin_lock in pch_udc")
obviously was not thought through and had made the situation even worse
than it was before. Two changes after almost reverted it. but a few
leftovers have been left as it. With this revert d3cb25a12138 completely.
While at it, narrow down the scope of unlocked section to prevent
potential race when prot_stall is assigned.
Fixes: d3cb25a12138 ("usb: gadget: udc: fix spin_lock in pch_udc")
Fixes: 9903b6bedd38 ("usb: gadget: pch-udc: fix lock")
Fixes: 1d23d16a88e6 ("usb: gadget: pch_udc: reorder spin_[un]lock to avoid deadlock")
Cc: Iago Abal <mail@iagoabal.eu>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210323153626.54908-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 55b74ce7d2ce0b0058f3e08cab185a0afacfe39e upstream.
Fixes bug with the handling of more than one language in
the string table in f_fs.c.
str_count was not reset for subsequent language codes.
str_count-- "rolls under" and processes u32 max strings on
the processing of the second language entry.
The existing bug can be reproduced by adding a second language table
to the structure "strings" in tools/usb/ffs-test.c.
Signed-off-by: Dean Anderson <dean@sensoray.com>
Link: https://lore.kernel.org/r/20210317224109.21534-1-dean@sensoray.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 4a5d797a9f9c4f18585544237216d7812686a71f upstream.
Fix a general protection fault reported by syzbot due to a race between
gadget_setup() and gadget_unbind() in raw_gadget.
The gadget core is supposed to guarantee that there won't be any more
callbacks to the gadget driver once the driver's unbind routine is
called. That guarantee is enforced in usb_gadget_remove_driver as
follows:
usb_gadget_disconnect(udc->gadget);
if (udc->gadget->irq)
synchronize_irq(udc->gadget->irq);
udc->driver->unbind(udc->gadget);
usb_gadget_udc_stop(udc);
usb_gadget_disconnect turns off the pullup resistor, telling the host
that the gadget is no longer connected and preventing the transmission
of any more USB packets. Any packets that have already been received
are sure to processed by the UDC driver's interrupt handler by the time
synchronize_irq returns.
But this doesn't work with dummy_hcd, because dummy_hcd doesn't use
interrupts; it uses a timer instead. It does have code to emulate the
effect of synchronize_irq, but that code doesn't get invoked at the
right time -- it currently runs in usb_gadget_udc_stop, after the unbind
callback instead of before. Indeed, there's no way for
usb_gadget_remove_driver to invoke this code before the unbind callback.
To fix this, move the synchronize_irq() emulation code to dummy_pullup
so that it runs before unbind. Also, add a comment explaining why it is
necessary to have it there.
Reported-by: syzbot+eb4674092e6cc8d9e0bd@syzkaller.appspotmail.com
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Link: https://lore.kernel.org/r/20210419033713.3021-1-mail@anirudhrb.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 26adde04acdff14a1f28d4a5dce46a8513a3038b ]
Patch adds extra checking for bInterval passed by configfs.
The 5.6.4 chapter of USB Specification (rev. 2.0) say:
"A high-bandwidth endpoint must specify a period of 1x125 µs
(i.e., a bInterval value of 1)."
The issue was observed during testing UVC class on CV.
I treat this change as improvement because we can control
bInterval by configfs.
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20210308125338.4824-1-pawell@gli-login.cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit ca91fd8c7643d93bfc18a6fec1a0d3972a46a18a upstream.
Realtek Hub (0bda:5487) in Dell Dock WD19 sometimes fails to work
after the system resumes from suspend with remote wakeup enabled
device connected:
[ 1947.640907] hub 5-2.3:1.0: hub_ext_port_status failed (err = -71)
[ 1947.641208] usb 5-2.3-port5: cannot disable (err = -71)
[ 1947.641401] hub 5-2.3:1.0: hub_ext_port_status failed (err = -71)
[ 1947.641450] usb 5-2.3-port4: cannot reset (err = -71)
Information of this hub:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 5
D: Ver= 2.10 Cls=09(hub ) Sub=00 Prot=02 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=5487 Rev= 1.47
S: Manufacturer=Dell Inc.
S: Product=Dell dock
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=01 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms
I:* If#= 0 Alt= 1 #EPs= 1 Cls=09(hub ) Sub=00 Prot=02 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms
The failure results from the ETIMEDOUT by chance when turning on
the suspend feature for the specified port of the hub. The port
seems to be in an unknown state so the hub_activate during resume
fails the hub_port_status, then the hub will fail to work.
The quirky hub needs the reset-resume quirk to function correctly.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210420174651.6202-1-chris.chiu@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 8f23fe35ff1e5491b4d279323a8209a31f03ae65 upstream.
This is another branded 8153 device that doesn't work well with LPM
enabled:
[ 400.597506] r8152 5-1.1:1.0 enx482ae3a2a6f0: Tx status -71
So disable LPM to resolve the issue.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/1922651
Link: https://lore.kernel.org/r/20210412135455.791971-1-kai.heng.feng@canonical.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
